1 /*- 2 * Copyright (c) 1999 Michael Smith <msmith@freebsd.org> 3 * Copyright (c) 1999 Kazutaka YOKOTA <yokota@freebsd.org> 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND 16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE 19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25 * SUCH DAMAGE. 26 * 27 * $FreeBSD$ 28 */ 29 30 #include <sys/param.h> 31 #include <sys/systm.h> 32 #include <sys/kernel.h> 33 #include <sys/module.h> 34 #include <sys/linker.h> 35 #include <sys/fbio.h> 36 37 #include <dev/fb/fbreg.h> 38 #include <dev/fb/splashreg.h> 39 #include <dev/fb/vgareg.h> 40 41 #include <isa/isareg.h> 42 43 #define FADE_TIMEOUT 15 /* sec */ 44 #define FADE_LEVELS 10 45 46 static int splash_mode = -1; 47 static int splash_on = FALSE; 48 49 static int bmp_start(video_adapter_t *adp); 50 static int bmp_end(video_adapter_t *adp); 51 static int bmp_splash(video_adapter_t *adp, int on); 52 static int bmp_Init(char *data, int swidth, int sheight, int sdepth); 53 static int bmp_Draw(video_adapter_t *adp); 54 55 static splash_decoder_t bmp_decoder = { 56 "splash_bmp", bmp_start, bmp_end, bmp_splash, SPLASH_IMAGE, 57 }; 58 59 SPLASH_DECODER(splash_bmp, bmp_decoder); 60 61 static int 62 bmp_start(video_adapter_t *adp) 63 { 64 /* currently only 256-color modes are supported XXX */ 65 static int modes[] = { 66 M_VESA_CG640x480, 67 M_VESA_CG800x600, 68 M_VESA_CG1024x768, 69 M_CG640x480, 70 /* 71 * As 320x200 doesn't generally look great, 72 * it's least preferred here. 73 */ 74 M_VGA_CG320, 75 -1, 76 }; 77 video_info_t info; 78 int i; 79 80 if ((bmp_decoder.data == NULL) || (bmp_decoder.data_size <= 0)) { 81 printf("splash_bmp: No bitmap file found\n"); 82 return ENODEV; 83 } 84 for (i = 0; modes[i] >= 0; ++i) { 85 if ((vidd_get_info(adp, modes[i], &info) == 0) && 86 (bmp_Init((u_char *)bmp_decoder.data, info.vi_width, 87 info.vi_height, info.vi_depth) == 0)) 88 break; 89 } 90 splash_mode = modes[i]; 91 if (splash_mode < 0) 92 printf("splash_bmp: No appropriate video mode found\n"); 93 if (bootverbose) 94 printf("bmp_start(): splash_mode:%d\n", splash_mode); 95 return ((splash_mode < 0) ? ENODEV : 0); 96 } 97 98 static int 99 bmp_end(video_adapter_t *adp) 100 { 101 /* nothing to do */ 102 return 0; 103 } 104 105 static int 106 bmp_splash(video_adapter_t *adp, int on) 107 { 108 static u_char pal[256*3]; 109 static long time_stamp; 110 u_char tpal[256*3]; 111 static int fading = TRUE, brightness = FADE_LEVELS; 112 struct timeval tv; 113 int i; 114 115 if (on) { 116 if (!splash_on) { 117 /* set up the video mode and draw something */ 118 if (vidd_set_mode(adp, splash_mode)) 119 return 1; 120 if (bmp_Draw(adp)) 121 return 1; 122 vidd_save_palette(adp, pal); 123 time_stamp = 0; 124 splash_on = TRUE; 125 } 126 /* 127 * This is a kludge to fade the image away. This section of the 128 * code takes effect only after the system is completely up. 129 * FADE_TIMEOUT should be configurable. 130 */ 131 if (!cold) { 132 getmicrotime(&tv); 133 if (time_stamp == 0) 134 time_stamp = tv.tv_sec; 135 if (tv.tv_sec > time_stamp + FADE_TIMEOUT) { 136 if (fading) 137 if (brightness == 0) { 138 fading = FALSE; 139 brightness++; 140 } 141 else brightness--; 142 else 143 if (brightness == FADE_LEVELS) { 144 fading = TRUE; 145 brightness--; 146 } 147 else brightness++; 148 for (i = 0; i < sizeof(pal); ++i) { 149 tpal[i] = pal[i] * brightness / FADE_LEVELS; 150 } 151 vidd_load_palette(adp, tpal); 152 time_stamp = tv.tv_sec; 153 } 154 } 155 return 0; 156 } else { 157 /* the video mode will be restored by the caller */ 158 splash_on = FALSE; 159 return 0; 160 } 161 } 162 163 /* 164 ** Code to handle Microsoft DIB (".BMP") format images. 165 ** 166 ** Blame me (msmith@freebsd.org) if this is broken, not Soren. 167 */ 168 169 typedef struct tagBITMAPFILEHEADER { /* bmfh */ 170 u_short bfType; 171 int bfSize; 172 u_short bfReserved1; 173 u_short bfReserved2; 174 int bfOffBits; 175 } __packed BITMAPFILEHEADER; 176 177 typedef struct tagBITMAPINFOHEADER { /* bmih */ 178 int biSize; 179 int biWidth; 180 int biHeight; 181 short biPlanes; 182 short biBitCount; 183 int biCompression; 184 int biSizeImage; 185 int biXPelsPerMeter; 186 int biYPelsPerMeter; 187 int biClrUsed; 188 int biClrImportant; 189 } __packed BITMAPINFOHEADER; 190 191 typedef struct tagRGBQUAD { /* rgbq */ 192 u_char rgbBlue; 193 u_char rgbGreen; 194 u_char rgbRed; 195 u_char rgbReserved; 196 } __packed RGBQUAD; 197 198 typedef struct tagBITMAPINFO { /* bmi */ 199 BITMAPINFOHEADER bmiHeader; 200 RGBQUAD bmiColors[256]; 201 } __packed BITMAPINFO; 202 203 typedef struct tagBITMAPF 204 { 205 BITMAPFILEHEADER bmfh; 206 BITMAPINFO bmfi; 207 } __packed BITMAPF; 208 209 #define BI_RGB 0 210 #define BI_RLE8 1 211 #define BI_RLE4 2 212 213 /* 214 ** all we actually care about the image 215 */ 216 typedef struct 217 { 218 int width,height; /* image dimensions */ 219 int swidth,sheight; /* screen dimensions for the current mode */ 220 u_char depth; /* image depth (1, 4, 8, 24 bits) */ 221 u_char sdepth; /* screen depth (1, 4, 8 bpp) */ 222 int ncols; /* number of colours */ 223 u_char palette[256][3]; /* raw palette data */ 224 u_char format; /* one of the BI_* constants above */ 225 u_char *data; /* pointer to the raw data */ 226 u_char *index; /* running pointer to the data while drawing */ 227 u_char *vidmem; /* video memory allocated for drawing */ 228 video_adapter_t *adp; 229 int bank; 230 } BMP_INFO; 231 232 static BMP_INFO bmp_info; 233 234 /* 235 ** bmp_SetPix 236 ** 237 ** Given (info), set the pixel at (x),(y) to (val) 238 ** 239 */ 240 static void 241 bmp_SetPix(BMP_INFO *info, int x, int y, u_char val) 242 { 243 int sofs, bofs; 244 int newbank; 245 246 /* 247 * range check to avoid explosions 248 */ 249 if ((x < 0) || (x >= info->swidth) || (y < 0) || (y >= info->sheight)) 250 return; 251 252 /* 253 * calculate offset into video memory; 254 * because 0,0 is bottom-left for DIB, we have to convert. 255 */ 256 sofs = ((info->height - (y+1) + (info->sheight - info->height) / 2) 257 * info->adp->va_line_width); 258 x += (info->swidth - info->width) / 2; 259 260 switch(info->sdepth) { 261 case 4: 262 case 1: 263 /* EGA/VGA planar modes */ 264 sofs += (x >> 3); 265 newbank = sofs/info->adp->va_window_size; 266 if (info->bank != newbank) { 267 vidd_set_win_org(info->adp, newbank*info->adp->va_window_size); 268 info->bank = newbank; 269 } 270 sofs %= info->adp->va_window_size; 271 bofs = x & 0x7; /* offset within byte */ 272 outw(GDCIDX, (0x8000 >> bofs) | 0x08); /* bit mask */ 273 outw(GDCIDX, (val << 8) | 0x00); /* set/reset */ 274 *(info->vidmem + sofs) ^= 0xff; /* read-modify-write */ 275 break; 276 277 case 8: 278 sofs += x; 279 newbank = sofs/info->adp->va_window_size; 280 if (info->bank != newbank) { 281 vidd_set_win_org(info->adp, newbank*info->adp->va_window_size); 282 info->bank = newbank; 283 } 284 sofs %= info->adp->va_window_size; 285 *(info->vidmem+sofs) = val; 286 break; 287 } 288 } 289 290 /* 291 ** bmp_DecodeRLE4 292 ** 293 ** Given (data) pointing to a line of RLE4-format data and (line) being the starting 294 ** line onscreen, decode the line. 295 */ 296 static void 297 bmp_DecodeRLE4(BMP_INFO *info, int line) 298 { 299 int count; /* run count */ 300 u_char val; 301 int x,y; /* screen position */ 302 303 x = 0; /* starting position */ 304 y = line; 305 306 /* loop reading data */ 307 for (;;) { 308 /* 309 * encoded mode starts with a run length, and then a byte with 310 * two colour indexes to alternate between for the run 311 */ 312 if (*info->index) { 313 for (count = 0; count < *info->index; count++, x++) { 314 if (count & 1) { /* odd count, low nybble */ 315 bmp_SetPix(info, x, y, *(info->index+1) & 0x0f); 316 } else { /* even count, high nybble */ 317 bmp_SetPix(info, x, y, (*(info->index+1) >>4) & 0x0f); 318 } 319 } 320 info->index += 2; 321 /* 322 * A leading zero is an escape; it may signal the end of the 323 * bitmap, a cursor move, or some absolute data. 324 */ 325 } else { /* zero tag may be absolute mode or an escape */ 326 switch (*(info->index+1)) { 327 case 0: /* end of line */ 328 info->index += 2; 329 return; 330 case 1: /* end of bitmap */ 331 info->index = NULL; 332 return; 333 case 2: /* move */ 334 x += *(info->index + 2); /* new coords */ 335 y += *(info->index + 3); 336 info->index += 4; 337 break; 338 default: /* literal bitmap data */ 339 for (count = 0; count < *(info->index + 1); count++, x++) { 340 val = *(info->index + 2 + (count / 2)); /* byte with nybbles */ 341 if (count & 1) { 342 val &= 0xf; /* get low nybble */ 343 } else { 344 val = (val >> 4); /* get high nybble */ 345 } 346 bmp_SetPix(info, x, y, val); 347 } 348 /* warning, this depends on integer truncation, do not hand-optimise! */ 349 info->index += 2 + ((count + 3) / 4) * 2; 350 break; 351 } 352 } 353 } 354 } 355 356 /* 357 ** bmp_DecodeRLE8 358 ** Given (data) pointing to a line of RLE8-format data and (line) being the starting 359 ** line onscreen, decode the line. 360 */ 361 static void 362 bmp_DecodeRLE8(BMP_INFO *info, int line) 363 { 364 int count; /* run count */ 365 int x,y; /* screen position */ 366 367 x = 0; /* starting position */ 368 y = line; 369 370 /* loop reading data */ 371 for(;;) { 372 /* 373 * encoded mode starts with a run length, and then a byte with 374 * two colour indexes to alternate between for the run 375 */ 376 if (*info->index) { 377 for (count = 0; count < *info->index; count++, x++) 378 bmp_SetPix(info, x, y, *(info->index+1)); 379 info->index += 2; 380 /* 381 * A leading zero is an escape; it may signal the end of the 382 * bitmap, a cursor move, or some absolute data. 383 */ 384 } else { /* zero tag may be absolute mode or an escape */ 385 switch(*(info->index+1)) { 386 case 0: /* end of line */ 387 info->index += 2; 388 return; 389 case 1: /* end of bitmap */ 390 info->index = NULL; 391 return; 392 case 2: /* move */ 393 x += *(info->index + 2); /* new coords */ 394 y += *(info->index + 3); 395 info->index += 4; 396 break; 397 default: /* literal bitmap data */ 398 for (count = 0; count < *(info->index + 1); count++, x++) 399 bmp_SetPix(info, x, y, *(info->index + 2 + count)); 400 /* must be an even count */ 401 info->index += 2 + count + (count & 1); 402 break; 403 } 404 } 405 } 406 } 407 408 /* 409 ** bmp_DecodeLine 410 ** 411 ** Given (info) pointing to an image being decoded, (line) being the line currently 412 ** being displayed, decode a line of data. 413 */ 414 static void 415 bmp_DecodeLine(BMP_INFO *info, int line) 416 { 417 int x; 418 u_char val, mask, *p; 419 420 switch(info->format) { 421 case BI_RGB: 422 switch(info->depth) { 423 case 8: 424 for (x = 0; x < info->width; x++, info->index++) 425 bmp_SetPix(info, x, line, *info->index); 426 info->index += 3 - (--x % 4); 427 break; 428 case 4: 429 p = info->index; 430 for (x = 0; x < info->width; x++) { 431 if (x & 1) { 432 val = *p & 0xf; /* get low nybble */ 433 p++; 434 } else { 435 val = *p >> 4; /* get high nybble */ 436 } 437 bmp_SetPix(info, x, line, val); 438 } 439 /* warning, this depends on integer truncation, do not hand-optimise! */ 440 info->index += ((x + 7) / 8) * 4; 441 break; 442 case 1: 443 p = info->index; 444 mask = 0x80; 445 for (x = 0; x < info->width; x++) { 446 val = (*p & mask) ? 1 : 0; 447 mask >>= 1; 448 if (mask == 0) { 449 mask = 0x80; 450 p++; 451 } 452 bmp_SetPix(info, x, line, val); 453 } 454 /* warning, this depends on integer truncation, do not hand-optimise! */ 455 info->index += ((x + 31) / 32) * 4; 456 break; 457 } 458 break; 459 case BI_RLE4: 460 bmp_DecodeRLE4(info, line); 461 break; 462 case BI_RLE8: 463 bmp_DecodeRLE8(info, line); 464 break; 465 } 466 } 467 468 /* 469 ** bmp_Init 470 ** 471 ** Given a pointer (data) to the image of a BMP file, fill in bmp_info with what 472 ** can be learnt from it. Return nonzero if the file isn't usable. 473 ** 474 ** Take screen dimensions (swidth), (sheight) and (sdepth) and make sure we 475 ** can work with these. 476 */ 477 static int 478 bmp_Init(char *data, int swidth, int sheight, int sdepth) 479 { 480 BITMAPF *bmf = (BITMAPF *)data; 481 int pind; 482 483 bmp_info.data = NULL; /* assume setup failed */ 484 485 /* check file ID */ 486 if (bmf->bmfh.bfType != 0x4d42) { 487 printf("splash_bmp: not a BMP file\n"); 488 return(1); /* XXX check word ordering for big-endian ports? */ 489 } 490 491 /* do we understand this bitmap format? */ 492 if (bmf->bmfi.bmiHeader.biSize > sizeof(bmf->bmfi.bmiHeader)) { 493 printf("splash_bmp: unsupported BMP format (size=%d)\n", 494 bmf->bmfi.bmiHeader.biSize); 495 return(1); 496 } 497 498 /* save what we know about the screen */ 499 bmp_info.swidth = swidth; 500 bmp_info.sheight = sheight; 501 bmp_info.sdepth = sdepth; 502 503 /* where's the data? */ 504 bmp_info.data = (u_char *)data + bmf->bmfh.bfOffBits; 505 506 /* image parameters */ 507 bmp_info.width = bmf->bmfi.bmiHeader.biWidth; 508 bmp_info.height = bmf->bmfi.bmiHeader.biHeight; 509 bmp_info.depth = bmf->bmfi.bmiHeader.biBitCount; 510 bmp_info.format = bmf->bmfi.bmiHeader.biCompression; 511 512 switch(bmp_info.format) { /* check compression format */ 513 case BI_RGB: 514 case BI_RLE4: 515 case BI_RLE8: 516 break; 517 default: 518 printf("splash_bmp: unsupported compression format\n"); 519 return(1); /* unsupported compression format */ 520 } 521 522 /* palette details */ 523 bmp_info.ncols = (bmf->bmfi.bmiHeader.biClrUsed); 524 bzero(bmp_info.palette,sizeof(bmp_info.palette)); 525 if (bmp_info.ncols == 0) { /* uses all of them */ 526 bmp_info.ncols = 1 << bmf->bmfi.bmiHeader.biBitCount; 527 } 528 if ((bmp_info.height > bmp_info.sheight) || 529 (bmp_info.width > bmp_info.swidth) || 530 (bmp_info.ncols > (1 << sdepth))) { 531 if (bootverbose) 532 printf("splash_bmp: beyond screen capacity (%dx%d, %d colors)\n", 533 bmp_info.width, bmp_info.height, bmp_info.ncols); 534 return(1); 535 } 536 537 /* read palette */ 538 for (pind = 0; pind < bmp_info.ncols; pind++) { 539 bmp_info.palette[pind][0] = bmf->bmfi.bmiColors[pind].rgbRed; 540 bmp_info.palette[pind][1] = bmf->bmfi.bmiColors[pind].rgbGreen; 541 bmp_info.palette[pind][2] = bmf->bmfi.bmiColors[pind].rgbBlue; 542 } 543 return(0); 544 } 545 546 /* 547 ** bmp_Draw 548 ** 549 ** Render the image. Return nonzero if that's not possible. 550 ** 551 */ 552 static int 553 bmp_Draw(video_adapter_t *adp) 554 { 555 int line; 556 #if 0 557 int i; 558 #endif 559 560 if (bmp_info.data == NULL) { /* init failed, do nothing */ 561 return(1); 562 } 563 564 /* clear the screen */ 565 bmp_info.vidmem = (u_char *)adp->va_window; 566 bmp_info.adp = adp; 567 vidd_clear(adp); 568 vidd_set_win_org(adp, 0); 569 bmp_info.bank = 0; 570 571 /* initialise the info structure for drawing */ 572 bmp_info.index = bmp_info.data; 573 574 /* set the palette for our image */ 575 vidd_load_palette(adp, (u_char *)&bmp_info.palette); 576 577 #if 0 578 /* XXX: this is ugly, but necessary for EGA/VGA 1bpp/4bpp modes */ 579 if ((adp->va_type == KD_EGA) || (adp->va_type == KD_VGA)) { 580 inb(adp->va_crtc_addr + 6); /* reset flip-flop */ 581 outb(ATC, 0x14); 582 outb(ATC, 0); 583 for (i = 0; i < 16; ++i) { 584 outb(ATC, i); 585 outb(ATC, i); 586 } 587 inb(adp->va_crtc_addr + 6); /* reset flip-flop */ 588 outb(ATC, 0x20); /* enable palette */ 589 590 outw(GDCIDX, 0x0f01); /* set/reset enable */ 591 592 if (bmp_info.sdepth == 1) 593 outw(TSIDX, 0x0102); /* unmask plane #0 */ 594 } 595 #endif 596 597 for (line = 0; (line < bmp_info.height) && bmp_info.index; line++) { 598 bmp_DecodeLine(&bmp_info, line); 599 } 600 return(0); 601 } 602