1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 2021 Alstom Group. 5 * Copyright (c) 2021 Semihalf. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 17 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 19 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 21 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 22 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 23 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 24 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 25 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 26 */ 27 28 #include <sys/cdefs.h> 29 __FBSDID("$FreeBSD$"); 30 31 #include <sys/param.h> 32 #include <sys/bus.h> 33 #include <sys/endian.h> 34 #include <sys/kernel.h> 35 #include <sys/module.h> 36 #include <sys/rman.h> 37 38 #include <machine/bus.h> 39 #include <machine/resource.h> 40 41 #include <dev/enetc/enetc_hw.h> 42 #include <dev/enetc/enetc_mdio.h> 43 44 #define ENETC_MDIO_RD4(regs, base, off) \ 45 bus_read_4((regs), (base) + (off)) 46 #define ENETC_MDIO_WR4(regs, base, off, value) \ 47 bus_write_4((regs), (base) + (off), (value)) 48 49 static int 50 enetc_mdio_wait(struct resource *regs, int mdio_base) 51 { 52 int i; 53 uint32_t val; 54 55 i = 0; 56 do { 57 DELAY(100); 58 val = ENETC_MDIO_RD4(regs, mdio_base, ENETC_MDIO_CFG); 59 if ((val & MDIO_CFG_BSY) == 0) 60 return (0); 61 } while (i++ < ENETC_TIMEOUT); 62 63 return (ETIMEDOUT); 64 } 65 66 int 67 enetc_mdio_read(struct resource *regs, int mdio_base, int phy, int reg) 68 { 69 uint32_t mdio_cfg, mdio_ctl; 70 uint16_t dev_addr; 71 72 mdio_cfg = MDIO_CFG_CLKDIV(ENETC_MDC_DIV) | MDIO_CFG_NEG; 73 if (reg & MII_ADDR_C45) { 74 /* clause 45 */ 75 dev_addr = (reg >> 16) & 0x1f; 76 mdio_cfg |= MDIO_CFG_ENC45; 77 } else { 78 /* clause 22 */ 79 dev_addr = reg & 0x1f; 80 mdio_cfg &= ~MDIO_CFG_ENC45; 81 } 82 83 ENETC_MDIO_WR4(regs, mdio_base, ENETC_MDIO_CFG, mdio_cfg); 84 85 if (enetc_mdio_wait(regs, mdio_base) == ETIMEDOUT) 86 return (EIO); 87 88 /* Set port and device addr. */ 89 mdio_ctl = MDIO_CTL_PORT_ADDR(phy) | MDIO_CTL_DEV_ADDR(dev_addr); 90 ENETC_MDIO_WR4(regs, mdio_base, ENETC_MDIO_CTL, mdio_ctl); 91 92 /* Set the register address. */ 93 if (reg & MII_ADDR_C45) { 94 ENETC_MDIO_WR4(regs, mdio_base, ENETC_MDIO_ADDR, reg & 0xffff); 95 96 if (enetc_mdio_wait(regs, mdio_base) == ETIMEDOUT) 97 return (EIO); 98 } 99 100 /* Initiate the read. */ 101 ENETC_MDIO_WR4(regs, mdio_base, ENETC_MDIO_CTL, mdio_ctl | MDIO_CTL_READ); 102 103 if (enetc_mdio_wait(regs, mdio_base) == ETIMEDOUT) 104 return (EIO); 105 106 /* Check if any error occurred while reading PHY register. */ 107 if (ENETC_MDIO_RD4(regs, mdio_base, ENETC_MDIO_CFG) & MDIO_CFG_RD_ER) 108 return (ENXIO); 109 110 return (MDIO_DATA(ENETC_MDIO_RD4(regs, mdio_base, ENETC_MDIO_DATA))); 111 } 112 113 int 114 enetc_mdio_write(struct resource *regs, int mdio_base, int phy, int reg, 115 int data) 116 { 117 uint32_t mdio_cfg, mdio_ctl; 118 uint16_t dev_addr; 119 120 mdio_cfg = MDIO_CFG_CLKDIV(ENETC_MDC_DIV) | MDIO_CFG_NEG; 121 if (reg & MII_ADDR_C45) { 122 /* clause 45 */ 123 dev_addr = (reg >> 16) & 0x1f; 124 mdio_cfg |= MDIO_CFG_ENC45; 125 } else { 126 /* clause 22 */ 127 dev_addr = reg & 0x1f; 128 mdio_cfg &= ~MDIO_CFG_ENC45; 129 } 130 131 ENETC_MDIO_WR4(regs, mdio_base, ENETC_MDIO_CFG, mdio_cfg); 132 133 if (enetc_mdio_wait(regs, mdio_base) == ETIMEDOUT) 134 return (EIO); 135 136 /* Set port and device addr. */ 137 mdio_ctl = MDIO_CTL_PORT_ADDR(phy) | MDIO_CTL_DEV_ADDR(dev_addr); 138 ENETC_MDIO_WR4(regs, mdio_base, ENETC_MDIO_CTL, mdio_ctl); 139 140 /* Set the register address. */ 141 if (reg & MII_ADDR_C45) { 142 ENETC_MDIO_WR4(regs, mdio_base, ENETC_MDIO_ADDR, reg & 0xffff); 143 144 if (enetc_mdio_wait(regs, mdio_base) == ETIMEDOUT) 145 return (EIO); 146 } 147 148 /* Write the value. */ 149 ENETC_MDIO_WR4(regs, mdio_base, ENETC_MDIO_DATA, MDIO_DATA(data)); 150 151 if (enetc_mdio_wait(regs, mdio_base) == ETIMEDOUT) 152 return (EIO); 153 154 return (0); 155 } 156