1 /****************************************************************************** 2 3 Copyright (c) 2001-2009, Intel Corporation 4 All rights reserved. 5 6 Redistribution and use in source and binary forms, with or without 7 modification, are permitted provided that the following conditions are met: 8 9 1. Redistributions of source code must retain the above copyright notice, 10 this list of conditions and the following disclaimer. 11 12 2. Redistributions in binary form must reproduce the above copyright 13 notice, this list of conditions and the following disclaimer in the 14 documentation and/or other materials provided with the distribution. 15 16 3. Neither the name of the Intel Corporation nor the names of its 17 contributors may be used to endorse or promote products derived from 18 this software without specific prior written permission. 19 20 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 21 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 24 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 POSSIBILITY OF SUCH DAMAGE. 31 32 ******************************************************************************/ 33 /*$FreeBSD$*/ 34 35 36 #ifndef _EM_H_DEFINED_ 37 #define _EM_H_DEFINED_ 38 39 40 /* Tunables */ 41 42 /* 43 * EM_TXD: Maximum number of Transmit Descriptors 44 * Valid Range: 80-256 for 82542 and 82543-based adapters 45 * 80-4096 for others 46 * Default Value: 256 47 * This value is the number of transmit descriptors allocated by the driver. 48 * Increasing this value allows the driver to queue more transmits. Each 49 * descriptor is 16 bytes. 50 * Since TDLEN should be multiple of 128bytes, the number of transmit 51 * desscriptors should meet the following condition. 52 * (num_tx_desc * sizeof(struct e1000_tx_desc)) % 128 == 0 53 */ 54 #define EM_MIN_TXD 80 55 #define EM_MAX_TXD_82543 256 56 #define EM_MAX_TXD 4096 57 #define EM_DEFAULT_TXD EM_MAX_TXD_82543 58 59 /* 60 * EM_RXD - Maximum number of receive Descriptors 61 * Valid Range: 80-256 for 82542 and 82543-based adapters 62 * 80-4096 for others 63 * Default Value: 256 64 * This value is the number of receive descriptors allocated by the driver. 65 * Increasing this value allows the driver to buffer more incoming packets. 66 * Each descriptor is 16 bytes. A receive buffer is also allocated for each 67 * descriptor. The maximum MTU size is 16110. 68 * Since TDLEN should be multiple of 128bytes, the number of transmit 69 * desscriptors should meet the following condition. 70 * (num_tx_desc * sizeof(struct e1000_tx_desc)) % 128 == 0 71 */ 72 #define EM_MIN_RXD 80 73 #define EM_MAX_RXD_82543 256 74 #define EM_MAX_RXD 4096 75 #define EM_DEFAULT_RXD EM_MAX_RXD_82543 76 77 /* 78 * EM_TIDV - Transmit Interrupt Delay Value 79 * Valid Range: 0-65535 (0=off) 80 * Default Value: 64 81 * This value delays the generation of transmit interrupts in units of 82 * 1.024 microseconds. Transmit interrupt reduction can improve CPU 83 * efficiency if properly tuned for specific network traffic. If the 84 * system is reporting dropped transmits, this value may be set too high 85 * causing the driver to run out of available transmit descriptors. 86 */ 87 #define EM_TIDV 64 88 89 /* 90 * EM_TADV - Transmit Absolute Interrupt Delay Value 91 * (Not valid for 82542/82543/82544) 92 * Valid Range: 0-65535 (0=off) 93 * Default Value: 64 94 * This value, in units of 1.024 microseconds, limits the delay in which a 95 * transmit interrupt is generated. Useful only if EM_TIDV is non-zero, 96 * this value ensures that an interrupt is generated after the initial 97 * packet is sent on the wire within the set amount of time. Proper tuning, 98 * along with EM_TIDV, may improve traffic throughput in specific 99 * network conditions. 100 */ 101 #define EM_TADV 64 102 103 /* 104 * EM_RDTR - Receive Interrupt Delay Timer (Packet Timer) 105 * Valid Range: 0-65535 (0=off) 106 * Default Value: 0 107 * This value delays the generation of receive interrupts in units of 1.024 108 * microseconds. Receive interrupt reduction can improve CPU efficiency if 109 * properly tuned for specific network traffic. Increasing this value adds 110 * extra latency to frame reception and can end up decreasing the throughput 111 * of TCP traffic. If the system is reporting dropped receives, this value 112 * may be set too high, causing the driver to run out of available receive 113 * descriptors. 114 * 115 * CAUTION: When setting EM_RDTR to a value other than 0, adapters 116 * may hang (stop transmitting) under certain network conditions. 117 * If this occurs a WATCHDOG message is logged in the system 118 * event log. In addition, the controller is automatically reset, 119 * restoring the network connection. To eliminate the potential 120 * for the hang ensure that EM_RDTR is set to 0. 121 */ 122 #define EM_RDTR 0 123 124 /* 125 * Receive Interrupt Absolute Delay Timer (Not valid for 82542/82543/82544) 126 * Valid Range: 0-65535 (0=off) 127 * Default Value: 64 128 * This value, in units of 1.024 microseconds, limits the delay in which a 129 * receive interrupt is generated. Useful only if EM_RDTR is non-zero, 130 * this value ensures that an interrupt is generated after the initial 131 * packet is received within the set amount of time. Proper tuning, 132 * along with EM_RDTR, may improve traffic throughput in specific network 133 * conditions. 134 */ 135 #define EM_RADV 64 136 137 /* 138 * This parameter controls the max duration of transmit watchdog. 139 */ 140 #define EM_WATCHDOG (5 * hz) 141 142 /* 143 * This parameter controls when the driver calls the routine to reclaim 144 * transmit descriptors. 145 */ 146 #define EM_TX_CLEANUP_THRESHOLD (adapter->num_tx_desc / 8) 147 #define EM_TX_OP_THRESHOLD (adapter->num_tx_desc / 32) 148 149 /* 150 * This parameter controls whether or not autonegotation is enabled. 151 * 0 - Disable autonegotiation 152 * 1 - Enable autonegotiation 153 */ 154 #define DO_AUTO_NEG 1 155 156 /* 157 * This parameter control whether or not the driver will wait for 158 * autonegotiation to complete. 159 * 1 - Wait for autonegotiation to complete 160 * 0 - Don't wait for autonegotiation to complete 161 */ 162 #define WAIT_FOR_AUTO_NEG_DEFAULT 0 163 164 /* Tunables -- End */ 165 166 #define AUTONEG_ADV_DEFAULT (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \ 167 ADVERTISE_100_HALF | ADVERTISE_100_FULL | \ 168 ADVERTISE_1000_FULL) 169 170 #define AUTO_ALL_MODES 0 171 172 /* PHY master/slave setting */ 173 #define EM_MASTER_SLAVE e1000_ms_hw_default 174 175 /* 176 * Micellaneous constants 177 */ 178 #define EM_VENDOR_ID 0x8086 179 #define EM_FLASH 0x0014 180 181 #define EM_JUMBO_PBA 0x00000028 182 #define EM_DEFAULT_PBA 0x00000030 183 #define EM_SMARTSPEED_DOWNSHIFT 3 184 #define EM_SMARTSPEED_MAX 15 185 #define EM_MAX_INTR 10 186 187 #define MAX_NUM_MULTICAST_ADDRESSES 128 188 #define PCI_ANY_ID (~0U) 189 #define ETHER_ALIGN 2 190 #define EM_FC_PAUSE_TIME 0x0680 191 #define EM_EEPROM_APME 0x400; 192 #define EM_82544_APME 0x0004; 193 194 /* Code compatilbility between 6 and 7 */ 195 #ifndef ETHER_BPF_MTAP 196 #define ETHER_BPF_MTAP BPF_MTAP 197 #endif 198 199 /* 200 * TDBA/RDBA should be aligned on 16 byte boundary. But TDLEN/RDLEN should be 201 * multiple of 128 bytes. So we align TDBA/RDBA on 128 byte boundary. This will 202 * also optimize cache line size effect. H/W supports up to cache line size 128. 203 */ 204 #define EM_DBA_ALIGN 128 205 206 #define SPEED_MODE_BIT (1<<21) /* On PCI-E MACs only */ 207 208 /* PCI Config defines */ 209 #define EM_BAR_TYPE(v) ((v) & EM_BAR_TYPE_MASK) 210 #define EM_BAR_TYPE_MASK 0x00000001 211 #define EM_BAR_TYPE_MMEM 0x00000000 212 #define EM_BAR_TYPE_IO 0x00000001 213 #define EM_BAR_TYPE_FLASH 0x0014 214 #define EM_BAR_MEM_TYPE(v) ((v) & EM_BAR_MEM_TYPE_MASK) 215 #define EM_BAR_MEM_TYPE_MASK 0x00000006 216 #define EM_BAR_MEM_TYPE_32BIT 0x00000000 217 #define EM_BAR_MEM_TYPE_64BIT 0x00000004 218 #define EM_MSIX_BAR 3 /* On 82575 */ 219 220 /* Defines for printing debug information */ 221 #define DEBUG_INIT 0 222 #define DEBUG_IOCTL 0 223 #define DEBUG_HW 0 224 225 #define INIT_DEBUGOUT(S) if (DEBUG_INIT) printf(S "\n") 226 #define INIT_DEBUGOUT1(S, A) if (DEBUG_INIT) printf(S "\n", A) 227 #define INIT_DEBUGOUT2(S, A, B) if (DEBUG_INIT) printf(S "\n", A, B) 228 #define IOCTL_DEBUGOUT(S) if (DEBUG_IOCTL) printf(S "\n") 229 #define IOCTL_DEBUGOUT1(S, A) if (DEBUG_IOCTL) printf(S "\n", A) 230 #define IOCTL_DEBUGOUT2(S, A, B) if (DEBUG_IOCTL) printf(S "\n", A, B) 231 #define HW_DEBUGOUT(S) if (DEBUG_HW) printf(S "\n") 232 #define HW_DEBUGOUT1(S, A) if (DEBUG_HW) printf(S "\n", A) 233 #define HW_DEBUGOUT2(S, A, B) if (DEBUG_HW) printf(S "\n", A, B) 234 235 #define EM_MAX_SCATTER 64 236 #define EM_VFTA_SIZE 128 237 #define EM_TSO_SIZE (65535 + sizeof(struct ether_vlan_header)) 238 #define EM_TSO_SEG_SIZE 4096 /* Max dma segment size */ 239 #define EM_MSIX_MASK 0x01F00000 /* For 82574 use */ 240 #define ETH_ZLEN 60 241 #define ETH_ADDR_LEN 6 242 #define CSUM_OFFLOAD 7 /* Offload bits in mbuf flag */ 243 244 /* 245 * 82574 has a nonstandard address for EIAC 246 * and since its only used in MSIX, and in 247 * the em driver only 82574 uses MSIX we can 248 * solve it just using this define. 249 */ 250 #define EM_EIAC 0x000DC 251 252 /* Used in for 82547 10Mb Half workaround */ 253 #define EM_PBA_BYTES_SHIFT 0xA 254 #define EM_TX_HEAD_ADDR_SHIFT 7 255 #define EM_PBA_TX_MASK 0xFFFF0000 256 #define EM_FIFO_HDR 0x10 257 #define EM_82547_PKT_THRESH 0x3e0 258 259 /* Precision Time Sync (IEEE 1588) defines */ 260 #define ETHERTYPE_IEEE1588 0x88F7 261 #define PICOSECS_PER_TICK 20833 262 #define TSYNC_PORT 319 /* UDP port for the protocol */ 263 264 /* 265 * Bus dma allocation structure used by 266 * e1000_dma_malloc and e1000_dma_free. 267 */ 268 struct em_dma_alloc { 269 bus_addr_t dma_paddr; 270 caddr_t dma_vaddr; 271 bus_dma_tag_t dma_tag; 272 bus_dmamap_t dma_map; 273 bus_dma_segment_t dma_seg; 274 int dma_nseg; 275 }; 276 277 struct adapter; 278 279 struct em_int_delay_info { 280 struct adapter *adapter; /* Back-pointer to the adapter struct */ 281 int offset; /* Register offset to read/write */ 282 int value; /* Current value in usecs */ 283 }; 284 285 /* Our adapter structure */ 286 struct adapter { 287 struct ifnet *ifp; 288 #if __FreeBSD_version >= 800000 289 struct buf_ring *br; 290 #endif 291 struct e1000_hw hw; 292 293 /* FreeBSD operating-system-specific structures. */ 294 struct e1000_osdep osdep; 295 struct device *dev; 296 297 struct resource *memory; 298 struct resource *flash; 299 struct resource *msix; 300 301 struct resource *ioport; 302 int io_rid; 303 304 /* 82574 may use 3 int vectors */ 305 struct resource *res[3]; 306 void *tag[3]; 307 int rid[3]; 308 309 struct ifmedia media; 310 struct callout timer; 311 struct callout tx_fifo_timer; 312 bool watchdog_check; 313 int watchdog_time; 314 int msi; 315 int if_flags; 316 int max_frame_size; 317 int min_frame_size; 318 struct mtx core_mtx; 319 struct mtx tx_mtx; 320 struct mtx rx_mtx; 321 int em_insert_vlan_header; 322 323 /* Task for FAST handling */ 324 struct task link_task; 325 struct task rxtx_task; 326 struct task rx_task; 327 struct task tx_task; 328 struct taskqueue *tq; /* private task queue */ 329 330 #if __FreeBSD_version >= 700029 331 eventhandler_tag vlan_attach; 332 eventhandler_tag vlan_detach; 333 u32 num_vlans; 334 #endif 335 336 /* Management and WOL features */ 337 u32 wol; 338 bool has_manage; 339 bool has_amt; 340 341 /* Info about the board itself */ 342 uint8_t link_active; 343 uint16_t link_speed; 344 uint16_t link_duplex; 345 uint32_t smartspeed; 346 struct em_int_delay_info tx_int_delay; 347 struct em_int_delay_info tx_abs_int_delay; 348 struct em_int_delay_info rx_int_delay; 349 struct em_int_delay_info rx_abs_int_delay; 350 351 /* 352 * Transmit definitions 353 * 354 * We have an array of num_tx_desc descriptors (handled 355 * by the controller) paired with an array of tx_buffers 356 * (at tx_buffer_area). 357 * The index of the next available descriptor is next_avail_tx_desc. 358 * The number of remaining tx_desc is num_tx_desc_avail. 359 */ 360 struct em_dma_alloc txdma; /* bus_dma glue for tx desc */ 361 struct e1000_tx_desc *tx_desc_base; 362 uint32_t next_avail_tx_desc; 363 uint32_t next_tx_to_clean; 364 volatile uint16_t num_tx_desc_avail; 365 uint16_t num_tx_desc; 366 uint16_t last_hw_offload; 367 uint32_t txd_cmd; 368 struct em_buffer *tx_buffer_area; 369 bus_dma_tag_t txtag; /* dma tag for tx */ 370 uint32_t tx_tso; /* last tx was tso */ 371 372 /* 373 * Receive definitions 374 * 375 * we have an array of num_rx_desc rx_desc (handled by the 376 * controller), and paired with an array of rx_buffers 377 * (at rx_buffer_area). 378 * The next pair to check on receive is at offset next_rx_desc_to_check 379 */ 380 struct em_dma_alloc rxdma; /* bus_dma glue for rx desc */ 381 struct e1000_rx_desc *rx_desc_base; 382 uint32_t next_rx_desc_to_check; 383 uint32_t rx_buffer_len; 384 uint16_t num_rx_desc; 385 int rx_process_limit; 386 struct em_buffer *rx_buffer_area; 387 bus_dma_tag_t rxtag; 388 bus_dmamap_t rx_sparemap; 389 390 /* 391 * First/last mbuf pointers, for 392 * collecting multisegment RX packets. 393 */ 394 struct mbuf *fmp; 395 struct mbuf *lmp; 396 397 /* Misc stats maintained by the driver */ 398 unsigned long dropped_pkts; 399 unsigned long mbuf_alloc_failed; 400 unsigned long mbuf_cluster_failed; 401 unsigned long no_tx_desc_avail1; 402 unsigned long no_tx_desc_avail2; 403 unsigned long no_tx_map_avail; 404 unsigned long no_tx_dma_setup; 405 unsigned long watchdog_events; 406 unsigned long rx_overruns; 407 unsigned long rx_irq; 408 unsigned long tx_irq; 409 unsigned long link_irq; 410 411 /* 82547 workaround */ 412 uint32_t tx_fifo_size; 413 uint32_t tx_fifo_head; 414 uint32_t tx_fifo_head_addr; 415 uint64_t tx_fifo_reset_cnt; 416 uint64_t tx_fifo_wrk_cnt; 417 uint32_t tx_head_addr; 418 419 /* For 82544 PCIX Workaround */ 420 boolean_t pcix_82544; 421 boolean_t in_detach; 422 423 424 struct e1000_hw_stats stats; 425 }; 426 427 /* ****************************************************************************** 428 * vendor_info_array 429 * 430 * This array contains the list of Subvendor/Subdevice IDs on which the driver 431 * should load. 432 * 433 * ******************************************************************************/ 434 typedef struct _em_vendor_info_t { 435 unsigned int vendor_id; 436 unsigned int device_id; 437 unsigned int subvendor_id; 438 unsigned int subdevice_id; 439 unsigned int index; 440 } em_vendor_info_t; 441 442 struct em_buffer { 443 int next_eop; /* Index of the desc to watch */ 444 struct mbuf *m_head; 445 bus_dmamap_t map; /* bus_dma map for packet */ 446 }; 447 448 /* For 82544 PCIX Workaround */ 449 typedef struct _ADDRESS_LENGTH_PAIR 450 { 451 uint64_t address; 452 uint32_t length; 453 } ADDRESS_LENGTH_PAIR, *PADDRESS_LENGTH_PAIR; 454 455 typedef struct _DESCRIPTOR_PAIR 456 { 457 ADDRESS_LENGTH_PAIR descriptor[4]; 458 uint32_t elements; 459 } DESC_ARRAY, *PDESC_ARRAY; 460 461 #define EM_CORE_LOCK_INIT(_sc, _name) \ 462 mtx_init(&(_sc)->core_mtx, _name, "EM Core Lock", MTX_DEF) 463 #define EM_TX_LOCK_INIT(_sc, _name) \ 464 mtx_init(&(_sc)->tx_mtx, _name, "EM TX Lock", MTX_DEF) 465 #define EM_RX_LOCK_INIT(_sc, _name) \ 466 mtx_init(&(_sc)->rx_mtx, _name, "EM RX Lock", MTX_DEF) 467 #define EM_CORE_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->core_mtx) 468 #define EM_TX_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->tx_mtx) 469 #define EM_RX_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->rx_mtx) 470 #define EM_CORE_LOCK(_sc) mtx_lock(&(_sc)->core_mtx) 471 #define EM_TX_LOCK(_sc) mtx_lock(&(_sc)->tx_mtx) 472 #define EM_TX_TRYLOCK(_sc) mtx_trylock(&(_sc)->tx_mtx) 473 #define EM_RX_LOCK(_sc) mtx_lock(&(_sc)->rx_mtx) 474 #define EM_CORE_UNLOCK(_sc) mtx_unlock(&(_sc)->core_mtx) 475 #define EM_TX_UNLOCK(_sc) mtx_unlock(&(_sc)->tx_mtx) 476 #define EM_RX_UNLOCK(_sc) mtx_unlock(&(_sc)->rx_mtx) 477 #define EM_CORE_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->core_mtx, MA_OWNED) 478 #define EM_TX_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->tx_mtx, MA_OWNED) 479 480 #endif /* _EM_H_DEFINED_ */ 481