1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 2016 Nicole Graziano <nicole@nextbsd.org> 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29 30 #ifndef _EM_H_DEFINED_ 31 #define _EM_H_DEFINED_ 32 33 #include "opt_ddb.h" 34 #include "opt_inet.h" 35 #include "opt_inet6.h" 36 #include "opt_rss.h" 37 38 #ifdef HAVE_KERNEL_OPTION_HEADERS 39 #include "opt_device_polling.h" 40 #endif 41 42 #include <sys/param.h> 43 #include <sys/systm.h> 44 #ifdef DDB 45 #include <sys/types.h> 46 #include <ddb/ddb.h> 47 #endif 48 #include <sys/buf_ring.h> 49 #include <sys/bus.h> 50 #include <sys/endian.h> 51 #include <sys/kernel.h> 52 #include <sys/kthread.h> 53 #include <sys/malloc.h> 54 #include <sys/mbuf.h> 55 #include <sys/module.h> 56 #include <sys/rman.h> 57 #include <sys/smp.h> 58 #include <sys/socket.h> 59 #include <sys/sockio.h> 60 #include <sys/sysctl.h> 61 #include <sys/taskqueue.h> 62 #include <sys/eventhandler.h> 63 #include <machine/bus.h> 64 #include <machine/resource.h> 65 66 #include <net/bpf.h> 67 #include <net/ethernet.h> 68 #include <net/if.h> 69 #include <net/if_var.h> 70 #include <net/if_arp.h> 71 #include <net/if_dl.h> 72 #include <net/if_media.h> 73 #include <net/iflib.h> 74 #ifdef RSS 75 #include <net/rss_config.h> 76 #include <netinet/in_rss.h> 77 #endif 78 79 #include <net/if_types.h> 80 #include <net/if_vlan_var.h> 81 82 #include <netinet/in_systm.h> 83 #include <netinet/in.h> 84 #include <netinet/if_ether.h> 85 #include <netinet/ip.h> 86 #include <netinet/ip6.h> 87 #include <netinet/tcp.h> 88 #include <netinet/udp.h> 89 90 #include <machine/in_cksum.h> 91 #include <dev/led/led.h> 92 #include <dev/pci/pcivar.h> 93 #include <dev/pci/pcireg.h> 94 95 #include "e1000_api.h" 96 #include "e1000_82571.h" 97 #include "ifdi_if.h" 98 99 /* Tunables */ 100 101 /* 102 * EM_MAX_TXD: Maximum number of Transmit Descriptors 103 * Valid Range: 80-256 for 82542 and 82543-based adapters 104 * 80-4096 for others 105 * Default Value: 1024 106 * This value is the number of transmit descriptors allocated by the driver. 107 * Increasing this value allows the driver to queue more transmits. Each 108 * descriptor is 16 bytes. 109 * Since TDLEN should be multiple of 128bytes, the number of transmit 110 * desscriptors should meet the following condition. 111 * (num_tx_desc * sizeof(struct e1000_tx_desc)) % 128 == 0 112 */ 113 #define EM_MIN_TXD 128 114 #define EM_MAX_TXD 4096 115 #define EM_DEFAULT_TXD 1024 116 #define EM_DEFAULT_MULTI_TXD 4096 117 #define IGB_MAX_TXD 4096 118 119 /* 120 * EM_MAX_RXD - Maximum number of receive Descriptors 121 * Valid Range: 80-256 for 82542 and 82543-based adapters 122 * 80-4096 for others 123 * Default Value: 1024 124 * This value is the number of receive descriptors allocated by the driver. 125 * Increasing this value allows the driver to buffer more incoming packets. 126 * Each descriptor is 16 bytes. A receive buffer is also allocated for each 127 * descriptor. The maximum MTU size is 16110. 128 * Since TDLEN should be multiple of 128bytes, the number of transmit 129 * desscriptors should meet the following condition. 130 * (num_tx_desc * sizeof(struct e1000_tx_desc)) % 128 == 0 131 */ 132 #define EM_MIN_RXD 128 133 #define EM_MAX_RXD 4096 134 #define EM_DEFAULT_RXD 1024 135 #define EM_DEFAULT_MULTI_RXD 4096 136 #define IGB_MAX_RXD 4096 137 138 /* 139 * EM_TIDV - Transmit Interrupt Delay Value 140 * Valid Range: 0-65535 (0=off) 141 * Default Value: 64 142 * This value delays the generation of transmit interrupts in units of 143 * 1.024 microseconds. Transmit interrupt reduction can improve CPU 144 * efficiency if properly tuned for specific network traffic. If the 145 * system is reporting dropped transmits, this value may be set too high 146 * causing the driver to run out of available transmit descriptors. 147 */ 148 #define EM_TIDV 64 149 150 /* 151 * EM_TADV - Transmit Absolute Interrupt Delay Value 152 * (Not valid for 82542/82543/82544) 153 * Valid Range: 0-65535 (0=off) 154 * Default Value: 64 155 * This value, in units of 1.024 microseconds, limits the delay in which a 156 * transmit interrupt is generated. Useful only if EM_TIDV is non-zero, 157 * this value ensures that an interrupt is generated after the initial 158 * packet is sent on the wire within the set amount of time. Proper tuning, 159 * along with EM_TIDV, may improve traffic throughput in specific 160 * network conditions. 161 */ 162 #define EM_TADV 64 163 164 /* 165 * EM_RDTR - Receive Interrupt Delay Timer (Packet Timer) 166 * Valid Range: 0-65535 (0=off) 167 * Default Value: 0 168 * This value delays the generation of receive interrupts in units of 1.024 169 * microseconds. Receive interrupt reduction can improve CPU efficiency if 170 * properly tuned for specific network traffic. Increasing this value adds 171 * extra latency to frame reception and can end up decreasing the throughput 172 * of TCP traffic. If the system is reporting dropped receives, this value 173 * may be set too high, causing the driver to run out of available receive 174 * descriptors. 175 * 176 * CAUTION: When setting EM_RDTR to a value other than 0, adapters 177 * may hang (stop transmitting) under certain network conditions. 178 * If this occurs a WATCHDOG message is logged in the system 179 * event log. In addition, the controller is automatically reset, 180 * restoring the network connection. To eliminate the potential 181 * for the hang ensure that EM_RDTR is set to 0. 182 */ 183 #define EM_RDTR 0 184 185 /* 186 * Receive Interrupt Absolute Delay Timer (Not valid for 82542/82543/82544) 187 * Valid Range: 0-65535 (0=off) 188 * Default Value: 64 189 * This value, in units of 1.024 microseconds, limits the delay in which a 190 * receive interrupt is generated. Useful only if EM_RDTR is non-zero, 191 * this value ensures that an interrupt is generated after the initial 192 * packet is received within the set amount of time. Proper tuning, 193 * along with EM_RDTR, may improve traffic throughput in specific network 194 * conditions. 195 */ 196 #define EM_RADV 64 197 198 /* 199 * This parameter controls whether or not autonegotiation is enabled. 200 * 0 - Disable autonegotiation 201 * 1 - Enable autonegotiation 202 */ 203 #define DO_AUTO_NEG 1 204 205 /* 206 * This parameter control whether or not the driver will wait for 207 * autonegotiation to complete. 208 * 1 - Wait for autonegotiation to complete 209 * 0 - Don't wait for autonegotiation to complete 210 */ 211 #define WAIT_FOR_AUTO_NEG_DEFAULT 0 212 213 /* Tunables -- End */ 214 215 #define AUTONEG_ADV_DEFAULT (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \ 216 ADVERTISE_100_HALF | ADVERTISE_100_FULL | \ 217 ADVERTISE_1000_FULL) 218 219 #define AUTO_ALL_MODES 0 220 221 /* PHY master/slave setting */ 222 #define EM_MASTER_SLAVE e1000_ms_hw_default 223 224 /* 225 * Miscellaneous constants 226 */ 227 #define EM_VENDOR_ID 0x8086 228 #define EM_FLASH 0x0014 229 230 #define EM_JUMBO_PBA 0x00000028 231 #define EM_DEFAULT_PBA 0x00000030 232 #define EM_SMARTSPEED_DOWNSHIFT 3 233 #define EM_SMARTSPEED_MAX 15 234 #define EM_MAX_LOOP 10 235 236 #define MAX_NUM_MULTICAST_ADDRESSES 128 237 #define PCI_ANY_ID (~0U) 238 #define ETHER_ALIGN 2 239 #define EM_FC_PAUSE_TIME 0x0680 240 #define EM_EEPROM_APME 0x400; 241 #define EM_82544_APME 0x0004; 242 243 /* Support AutoMediaDetect for Marvell M88 PHY in i354 */ 244 #define IGB_MEDIA_RESET (1 << 0) 245 246 /* Define the starting Interrupt rate per Queue */ 247 #define IGB_INTS_PER_SEC 8000 248 #define IGB_DEFAULT_ITR ((1000000/IGB_INTS_PER_SEC) << 2) 249 250 #define IGB_LINK_ITR 2000 251 #define I210_LINK_DELAY 1000 252 253 #define IGB_TXPBSIZE 20408 254 #define IGB_HDR_BUF 128 255 #define IGB_PKTTYPE_MASK 0x0000FFF0 256 #define IGB_DMCTLX_DCFLUSH_DIS 0x80000000 /* Disable DMA Coalesce Flush */ 257 258 /* 259 * Driver state logic for the detection of a hung state 260 * in hardware. Set TX_HUNG whenever a TX packet is used 261 * (data is sent) and clear it when txeof() is invoked if 262 * any descriptors from the ring are cleaned/reclaimed. 263 * Increment internal counter if no descriptors are cleaned 264 * and compare to TX_MAXTRIES. When counter > TX_MAXTRIES, 265 * reset adapter. 266 */ 267 #define EM_TX_IDLE 0x00000000 268 #define EM_TX_BUSY 0x00000001 269 #define EM_TX_HUNG 0x80000000 270 #define EM_TX_MAXTRIES 10 271 272 #define PCICFG_DESC_RING_STATUS 0xe4 273 #define FLUSH_DESC_REQUIRED 0x100 274 275 276 #define IGB_RX_PTHRESH ((hw->mac.type == e1000_i354) ? 12 : \ 277 ((hw->mac.type <= e1000_82576) ? 16 : 8)) 278 #define IGB_RX_HTHRESH 8 279 #define IGB_RX_WTHRESH ((hw->mac.type == e1000_82576 && \ 280 (sc->intr_type == IFLIB_INTR_MSIX)) ? 1 : 4) 281 282 #define IGB_TX_PTHRESH ((hw->mac.type == e1000_i354) ? 20 : 8) 283 #define IGB_TX_HTHRESH 1 284 #define IGB_TX_WTHRESH ((hw->mac.type != e1000_82575 && \ 285 sc->intr_type == IFLIB_INTR_MSIX) ? 1 : 16) 286 287 /* 288 * TDBA/RDBA should be aligned on 16 byte boundary. But TDLEN/RDLEN should be 289 * multiple of 128 bytes. So we align TDBA/RDBA on 128 byte boundary. This will 290 * also optimize cache line size effect. H/W supports up to cache line size 128. 291 */ 292 #define EM_DBA_ALIGN 128 293 294 /* 295 * See Intel 82574 Driver Programming Interface Manual, Section 10.2.6.9 296 */ 297 #define TARC_COMPENSATION_MODE (1 << 7) /* Compensation Mode */ 298 #define TARC_SPEED_MODE_BIT (1 << 21) /* On PCI-E MACs only */ 299 #define TARC_MQ_FIX (1 << 23) | \ 300 (1 << 24) | \ 301 (1 << 25) /* Handle errata in MQ mode */ 302 #define TARC_ERRATA_BIT (1 << 26) /* Note from errata on 82574 */ 303 304 /* PCI Config defines */ 305 #define EM_BAR_TYPE(v) ((v) & EM_BAR_TYPE_MASK) 306 #define EM_BAR_TYPE_MASK 0x00000001 307 #define EM_BAR_TYPE_MMEM 0x00000000 308 #define EM_BAR_TYPE_IO 0x00000001 309 #define EM_BAR_TYPE_FLASH 0x0014 310 #define EM_BAR_MEM_TYPE(v) ((v) & EM_BAR_MEM_TYPE_MASK) 311 #define EM_BAR_MEM_TYPE_MASK 0x00000006 312 #define EM_BAR_MEM_TYPE_32BIT 0x00000000 313 #define EM_BAR_MEM_TYPE_64BIT 0x00000004 314 315 /* Defines for printing debug information */ 316 #define DEBUG_INIT 0 317 #define DEBUG_IOCTL 0 318 #define DEBUG_HW 0 319 320 #define INIT_DEBUGOUT(S) if (DEBUG_INIT) printf(S "\n") 321 #define INIT_DEBUGOUT1(S, A) if (DEBUG_INIT) printf(S "\n", A) 322 #define INIT_DEBUGOUT2(S, A, B) if (DEBUG_INIT) printf(S "\n", A, B) 323 #define IOCTL_DEBUGOUT(S) if (DEBUG_IOCTL) printf(S "\n") 324 #define IOCTL_DEBUGOUT1(S, A) if (DEBUG_IOCTL) printf(S "\n", A) 325 #define IOCTL_DEBUGOUT2(S, A, B) if (DEBUG_IOCTL) printf(S "\n", A, B) 326 #define HW_DEBUGOUT(S) if (DEBUG_HW) printf(S "\n") 327 #define HW_DEBUGOUT1(S, A) if (DEBUG_HW) printf(S "\n", A) 328 #define HW_DEBUGOUT2(S, A, B) if (DEBUG_HW) printf(S "\n", A, B) 329 330 #define EM_MAX_SCATTER 40 331 #define EM_VFTA_SIZE 128 332 #define EM_TSO_SIZE 65535 333 #define EM_TSO_SEG_SIZE 4096 /* Max dma segment size */ 334 #define ETH_ZLEN 60 335 336 /* Offload bits in mbuf flag */ 337 #define EM_CSUM_OFFLOAD (CSUM_IP | CSUM_IP_UDP | CSUM_IP_TCP | \ 338 CSUM_IP6_UDP | CSUM_IP6_TCP) 339 #define IGB_CSUM_OFFLOAD (CSUM_IP | CSUM_IP_UDP | CSUM_IP_TCP | \ 340 CSUM_IP_SCTP | CSUM_IP6_UDP | CSUM_IP6_TCP | \ 341 CSUM_IP6_SCTP) 342 343 #define IGB_PKTTYPE_MASK 0x0000FFF0 344 #define IGB_DMCTLX_DCFLUSH_DIS 0x80000000 /* Disable DMA Coalesce Flush */ 345 346 /* 347 * 82574 has a nonstandard address for EIAC 348 * and since its only used in MSI-X, and in 349 * the em driver only 82574 uses MSI-X we can 350 * solve it just using this define. 351 */ 352 #define EM_EIAC 0x000DC 353 /* 354 * 82574 only reports 3 MSI-X vectors by default; 355 * defines assisting with making it report 5 are 356 * located here. 357 */ 358 #define EM_NVM_PCIE_CTRL 0x1B 359 #define EM_NVM_MSIX_N_MASK (0x7 << EM_NVM_MSIX_N_SHIFT) 360 #define EM_NVM_MSIX_N_SHIFT 7 361 362 struct e1000_softc; 363 364 struct em_int_delay_info { 365 struct e1000_softc *sc; /* Back-pointer to the sc struct */ 366 int offset; /* Register offset to read/write */ 367 int value; /* Current value in usecs */ 368 }; 369 370 /* 371 * The transmit ring, one per tx queue 372 */ 373 struct tx_ring { 374 struct e1000_softc *sc; 375 struct e1000_tx_desc *tx_base; 376 uint64_t tx_paddr; 377 qidx_t *tx_rsq; 378 bool tx_tso; /* last tx was tso */ 379 uint8_t me; 380 qidx_t tx_rs_cidx; 381 qidx_t tx_rs_pidx; 382 qidx_t tx_cidx_processed; 383 /* Interrupt resources */ 384 void *tag; 385 struct resource *res; 386 unsigned long tx_irq; 387 388 /* Saved csum offloading context information */ 389 int csum_flags; 390 int csum_lhlen; 391 int csum_iphlen; 392 393 int csum_thlen; 394 int csum_mss; 395 int csum_pktlen; 396 397 uint32_t csum_txd_upper; 398 uint32_t csum_txd_lower; /* last field */ 399 }; 400 401 /* 402 * The Receive ring, one per rx queue 403 */ 404 struct rx_ring { 405 struct e1000_softc *sc; 406 struct em_rx_queue *que; 407 u32 me; 408 u32 payload; 409 union e1000_rx_desc_extended *rx_base; 410 uint64_t rx_paddr; 411 412 /* Interrupt resources */ 413 void *tag; 414 struct resource *res; 415 bool discard; 416 417 /* Soft stats */ 418 unsigned long rx_irq; 419 unsigned long rx_discarded; 420 unsigned long rx_packets; 421 unsigned long rx_bytes; 422 }; 423 424 struct em_tx_queue { 425 struct e1000_softc *sc; 426 u32 msix; 427 u32 eims; /* This queue's EIMS bit */ 428 u32 me; 429 struct tx_ring txr; 430 }; 431 432 struct em_rx_queue { 433 struct e1000_softc *sc; 434 u32 me; 435 u32 msix; 436 u32 eims; 437 struct rx_ring rxr; 438 u64 irqs; 439 struct if_irq que_irq; 440 }; 441 442 /* Our softc structure */ 443 struct e1000_softc { 444 struct e1000_hw hw; 445 446 if_softc_ctx_t shared; 447 if_ctx_t ctx; 448 #define tx_num_queues shared->isc_ntxqsets 449 #define rx_num_queues shared->isc_nrxqsets 450 #define intr_type shared->isc_intr 451 /* FreeBSD operating-system-specific structures. */ 452 struct e1000_osdep osdep; 453 device_t dev; 454 struct cdev *led_dev; 455 456 struct em_tx_queue *tx_queues; 457 struct em_rx_queue *rx_queues; 458 struct if_irq irq; 459 460 struct resource *memory; 461 struct resource *flash; 462 struct resource *ioport; 463 464 struct resource *res; 465 void *tag; 466 u32 linkvec; 467 u32 ivars; 468 469 struct ifmedia *media; 470 int msix; 471 int if_flags; 472 int em_insert_vlan_header; 473 u32 ims; 474 bool in_detach; 475 476 u32 flags; 477 /* Task for FAST handling */ 478 struct grouptask link_task; 479 480 u16 num_vlans; 481 u32 txd_cmd; 482 483 u32 rx_mbuf_sz; 484 485 /* Management and WOL features */ 486 u32 wol; 487 bool has_manage; 488 bool has_amt; 489 490 /* Multicast array memory */ 491 u8 *mta; 492 493 /* 494 ** Shadow VFTA table, this is needed because 495 ** the real vlan filter table gets cleared during 496 ** a soft reset and the driver needs to be able 497 ** to repopulate it. 498 */ 499 u32 shadow_vfta[EM_VFTA_SIZE]; 500 501 /* Info about the interface */ 502 u16 link_active; 503 u16 fc; 504 u16 link_speed; 505 u16 link_duplex; 506 u32 smartspeed; 507 u32 dmac; 508 int link_mask; 509 int tso_automasked; 510 511 u64 que_mask; 512 513 /* We need to store this at attach due to e1000 hw/sw locking model */ 514 struct e1000_fw_version fw_ver; 515 516 struct em_int_delay_info tx_int_delay; 517 struct em_int_delay_info tx_abs_int_delay; 518 struct em_int_delay_info rx_int_delay; 519 struct em_int_delay_info rx_abs_int_delay; 520 struct em_int_delay_info tx_itr; 521 522 /* Misc stats maintained by the driver */ 523 unsigned long dropped_pkts; 524 unsigned long link_irq; 525 unsigned long rx_overruns; 526 unsigned long watchdog_events; 527 528 struct e1000_hw_stats stats; 529 u16 vf_ifp; 530 }; 531 532 /******************************************************************************** 533 * vendor_info_array 534 * 535 * This array contains the list of Subvendor/Subdevice IDs on which the driver 536 * should load. 537 * 538 ********************************************************************************/ 539 typedef struct _em_vendor_info_t { 540 unsigned int vendor_id; 541 unsigned int device_id; 542 unsigned int subvendor_id; 543 unsigned int subdevice_id; 544 unsigned int index; 545 } em_vendor_info_t; 546 547 void em_dump_rs(struct e1000_softc *); 548 549 #define EM_RSSRK_SIZE 4 550 #define EM_RSSRK_VAL(key, i) (key[(i) * EM_RSSRK_SIZE] | \ 551 key[(i) * EM_RSSRK_SIZE + 1] << 8 | \ 552 key[(i) * EM_RSSRK_SIZE + 2] << 16 | \ 553 key[(i) * EM_RSSRK_SIZE + 3] << 24) 554 #endif /* _EM_H_DEFINED_ */ 555