xref: /freebsd/sys/dev/e1000/if_em.c (revision dd4f32ae62426a10a84b4322756d82c06c202c4e)
1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause
3  *
4  * Copyright (c) 2016 Nicole Graziano <nicole@nextbsd.org>
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  *
16  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
20  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26  * SUCH DAMAGE.
27  */
28 
29 /* $FreeBSD$ */
30 #include "if_em.h"
31 #include <sys/sbuf.h>
32 #include <machine/_inttypes.h>
33 
34 #define em_mac_min e1000_82571
35 #define igb_mac_min e1000_82575
36 
37 /*********************************************************************
38  *  Driver version:
39  *********************************************************************/
40 char em_driver_version[] = "7.7.8-fbsd";
41 char igb_driver_version[] = "2.5.19-fbsd";
42 
43 /*********************************************************************
44  *  PCI Device ID Table
45  *
46  *  Used by probe to select devices to load on
47  *  Last field stores an index into e1000_strings
48  *  Last entry must be all 0s
49  *
50  *  { Vendor ID, Device ID, SubVendor ID, SubDevice ID, String Index }
51  *********************************************************************/
52 
53 static pci_vendor_info_t em_vendor_info_array[] =
54 {
55 	/* Intel(R) - lem-class legacy devices */
56 	PVID(0x8086, E1000_DEV_ID_82540EM, "Intel(R) Legacy PRO/1000 MT 82540EM"),
57 	PVID(0x8086, E1000_DEV_ID_82540EM_LOM, "Intel(R) Legacy PRO/1000 MT 82540EM (LOM)"),
58 	PVID(0x8086, E1000_DEV_ID_82540EP, "Intel(R) Legacy PRO/1000 MT 82540EP"),
59 	PVID(0x8086, E1000_DEV_ID_82540EP_LOM, "Intel(R) Legacy PRO/1000 MT 82540EP (LOM)"),
60 	PVID(0x8086, E1000_DEV_ID_82540EP_LP, "Intel(R) Legacy PRO/1000 MT 82540EP (Mobile)"),
61 
62 	PVID(0x8086, E1000_DEV_ID_82541EI, "Intel(R) Legacy PRO/1000 MT 82541EI (Copper)"),
63 	PVID(0x8086, E1000_DEV_ID_82541ER, "Intel(R) Legacy PRO/1000 82541ER"),
64 	PVID(0x8086, E1000_DEV_ID_82541ER_LOM, "Intel(R) Legacy PRO/1000 MT 82541ER"),
65 	PVID(0x8086, E1000_DEV_ID_82541EI_MOBILE, "Intel(R) Legacy PRO/1000 MT 82541EI (Mobile)"),
66 	PVID(0x8086, E1000_DEV_ID_82541GI, "Intel(R) Legacy PRO/1000 MT 82541GI"),
67 	PVID(0x8086, E1000_DEV_ID_82541GI_LF, "Intel(R) Legacy PRO/1000 GT 82541PI"),
68 	PVID(0x8086, E1000_DEV_ID_82541GI_MOBILE, "Intel(R) Legacy PRO/1000 MT 82541GI (Mobile)"),
69 
70 	PVID(0x8086, E1000_DEV_ID_82542, "Intel(R) Legacy PRO/1000 82542 (Fiber)"),
71 
72 	PVID(0x8086, E1000_DEV_ID_82543GC_FIBER, "Intel(R) Legacy PRO/1000 F 82543GC (Fiber)"),
73 	PVID(0x8086, E1000_DEV_ID_82543GC_COPPER, "Intel(R) Legacy PRO/1000 T 82543GC (Copper)"),
74 
75 	PVID(0x8086, E1000_DEV_ID_82544EI_COPPER, "Intel(R) Legacy PRO/1000 XT 82544EI (Copper)"),
76 	PVID(0x8086, E1000_DEV_ID_82544EI_FIBER, "Intel(R) Legacy PRO/1000 XF 82544EI (Fiber)"),
77 	PVID(0x8086, E1000_DEV_ID_82544GC_COPPER, "Intel(R) Legacy PRO/1000 T 82544GC (Copper)"),
78 	PVID(0x8086, E1000_DEV_ID_82544GC_LOM, "Intel(R) Legacy PRO/1000 XT 82544GC (LOM)"),
79 
80 	PVID(0x8086, E1000_DEV_ID_82545EM_COPPER, "Intel(R) Legacy PRO/1000 MT 82545EM (Copper)"),
81 	PVID(0x8086, E1000_DEV_ID_82545EM_FIBER, "Intel(R) Legacy PRO/1000 MF 82545EM (Fiber)"),
82 	PVID(0x8086, E1000_DEV_ID_82545GM_COPPER, "Intel(R) Legacy PRO/1000 MT 82545GM (Copper)"),
83 	PVID(0x8086, E1000_DEV_ID_82545GM_FIBER, "Intel(R) Legacy PRO/1000 MF 82545GM (Fiber)"),
84 	PVID(0x8086, E1000_DEV_ID_82545GM_SERDES, "Intel(R) Legacy PRO/1000 MB 82545GM (SERDES)"),
85 
86 	PVID(0x8086, E1000_DEV_ID_82546EB_COPPER, "Intel(R) Legacy PRO/1000 MT 82546EB (Copper)"),
87 	PVID(0x8086, E1000_DEV_ID_82546EB_FIBER, "Intel(R) Legacy PRO/1000 MF 82546EB (Fiber)"),
88 	PVID(0x8086, E1000_DEV_ID_82546EB_QUAD_COPPER, "Intel(R) Legacy PRO/1000 MT 82546EB (Quad Copper"),
89 	PVID(0x8086, E1000_DEV_ID_82546GB_COPPER, "Intel(R) Legacy PRO/1000 MT 82546GB (Copper)"),
90 	PVID(0x8086, E1000_DEV_ID_82546GB_FIBER, "Intel(R) Legacy PRO/1000 MF 82546GB (Fiber)"),
91 	PVID(0x8086, E1000_DEV_ID_82546GB_SERDES, "Intel(R) Legacy PRO/1000 MB 82546GB (SERDES)"),
92 	PVID(0x8086, E1000_DEV_ID_82546GB_PCIE, "Intel(R) Legacy PRO/1000 P 82546GB (PCIe)"),
93 	PVID(0x8086, E1000_DEV_ID_82546GB_QUAD_COPPER, "Intel(R) Legacy PRO/1000 GT 82546GB (Quad Copper)"),
94 	PVID(0x8086, E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3, "Intel(R) Legacy PRO/1000 GT 82546GB (Quad Copper)"),
95 
96 	PVID(0x8086, E1000_DEV_ID_82547EI, "Intel(R) Legacy PRO/1000 CT 82547EI"),
97 	PVID(0x8086, E1000_DEV_ID_82547EI_MOBILE, "Intel(R) Legacy PRO/1000 CT 82547EI (Mobile)"),
98 	PVID(0x8086, E1000_DEV_ID_82547GI, "Intel(R) Legacy PRO/1000 CT 82547GI"),
99 
100 	/* Intel(R) - em-class devices */
101 	PVID(0x8086, E1000_DEV_ID_82571EB_COPPER, "Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)"),
102 	PVID(0x8086, E1000_DEV_ID_82571EB_FIBER, "Intel(R) PRO/1000 PF 82571EB/82571GB (Fiber)"),
103 	PVID(0x8086, E1000_DEV_ID_82571EB_SERDES, "Intel(R) PRO/1000 PB 82571EB (SERDES)"),
104 	PVID(0x8086, E1000_DEV_ID_82571EB_SERDES_DUAL, "Intel(R) PRO/1000 82571EB (Dual Mezzanine)"),
105 	PVID(0x8086, E1000_DEV_ID_82571EB_SERDES_QUAD, "Intel(R) PRO/1000 82571EB (Quad Mezzanine)"),
106 	PVID(0x8086, E1000_DEV_ID_82571EB_QUAD_COPPER, "Intel(R) PRO/1000 PT 82571EB/82571GB (Quad Copper)"),
107 	PVID(0x8086, E1000_DEV_ID_82571EB_QUAD_COPPER_LP, "Intel(R) PRO/1000 PT 82571EB/82571GB (Quad Copper)"),
108 	PVID(0x8086, E1000_DEV_ID_82571EB_QUAD_FIBER, "Intel(R) PRO/1000 PF 82571EB (Quad Fiber)"),
109 	PVID(0x8086, E1000_DEV_ID_82571PT_QUAD_COPPER, "Intel(R) PRO/1000 PT 82571PT (Quad Copper)"),
110 	PVID(0x8086, E1000_DEV_ID_82572EI, "Intel(R) PRO/1000 PT 82572EI (Copper)"),
111 	PVID(0x8086, E1000_DEV_ID_82572EI_COPPER, "Intel(R) PRO/1000 PT 82572EI (Copper)"),
112 	PVID(0x8086, E1000_DEV_ID_82572EI_FIBER, "Intel(R) PRO/1000 PF 82572EI (Fiber)"),
113 	PVID(0x8086, E1000_DEV_ID_82572EI_SERDES, "Intel(R) PRO/1000 82572EI (SERDES)"),
114 	PVID(0x8086, E1000_DEV_ID_82573E, "Intel(R) PRO/1000 82573E (Copper)"),
115 	PVID(0x8086, E1000_DEV_ID_82573E_IAMT, "Intel(R) PRO/1000 82573E AMT (Copper)"),
116 	PVID(0x8086, E1000_DEV_ID_82573L, "Intel(R) PRO/1000 82573L"),
117 	PVID(0x8086, E1000_DEV_ID_82583V, "Intel(R) 82583V"),
118 	PVID(0x8086, E1000_DEV_ID_80003ES2LAN_COPPER_SPT, "Intel(R) 80003ES2LAN (Copper)"),
119 	PVID(0x8086, E1000_DEV_ID_80003ES2LAN_SERDES_SPT, "Intel(R) 80003ES2LAN (SERDES)"),
120 	PVID(0x8086, E1000_DEV_ID_80003ES2LAN_COPPER_DPT, "Intel(R) 80003ES2LAN (Dual Copper)"),
121 	PVID(0x8086, E1000_DEV_ID_80003ES2LAN_SERDES_DPT, "Intel(R) 80003ES2LAN (Dual SERDES)"),
122 	PVID(0x8086, E1000_DEV_ID_ICH8_IGP_M_AMT, "Intel(R) 82566MM ICH8 AMT (Mobile)"),
123 	PVID(0x8086, E1000_DEV_ID_ICH8_IGP_AMT, "Intel(R) 82566DM ICH8 AMT"),
124 	PVID(0x8086, E1000_DEV_ID_ICH8_IGP_C, "Intel(R) 82566DC ICH8"),
125 	PVID(0x8086, E1000_DEV_ID_ICH8_IFE, "Intel(R) 82562V ICH8"),
126 	PVID(0x8086, E1000_DEV_ID_ICH8_IFE_GT, "Intel(R) 82562GT ICH8"),
127 	PVID(0x8086, E1000_DEV_ID_ICH8_IFE_G, "Intel(R) 82562G ICH8"),
128 	PVID(0x8086, E1000_DEV_ID_ICH8_IGP_M, "Intel(R) 82566MC ICH8"),
129 	PVID(0x8086, E1000_DEV_ID_ICH8_82567V_3, "Intel(R) 82567V-3 ICH8"),
130 	PVID(0x8086, E1000_DEV_ID_ICH9_IGP_M_AMT, "Intel(R) 82567LM ICH9 AMT"),
131 	PVID(0x8086, E1000_DEV_ID_ICH9_IGP_AMT, "Intel(R) 82566DM-2 ICH9 AMT"),
132 	PVID(0x8086, E1000_DEV_ID_ICH9_IGP_C, "Intel(R) 82566DC-2 ICH9"),
133 	PVID(0x8086, E1000_DEV_ID_ICH9_IGP_M, "Intel(R) 82567LF ICH9"),
134 	PVID(0x8086, E1000_DEV_ID_ICH9_IGP_M_V, "Intel(R) 82567V ICH9"),
135 	PVID(0x8086, E1000_DEV_ID_ICH9_IFE, "Intel(R) 82562V-2 ICH9"),
136 	PVID(0x8086, E1000_DEV_ID_ICH9_IFE_GT, "Intel(R) 82562GT-2 ICH9"),
137 	PVID(0x8086, E1000_DEV_ID_ICH9_IFE_G, "Intel(R) 82562G-2 ICH9"),
138 	PVID(0x8086, E1000_DEV_ID_ICH9_BM, "Intel(R) 82567LM-4 ICH9"),
139 	PVID(0x8086, E1000_DEV_ID_82574L, "Intel(R) Gigabit CT 82574L"),
140 	PVID(0x8086, E1000_DEV_ID_82574LA, "Intel(R) 82574L-Apple"),
141 	PVID(0x8086, E1000_DEV_ID_ICH10_R_BM_LM, "Intel(R) 82567LM-2 ICH10"),
142 	PVID(0x8086, E1000_DEV_ID_ICH10_R_BM_LF, "Intel(R) 82567LF-2 ICH10"),
143 	PVID(0x8086, E1000_DEV_ID_ICH10_R_BM_V, "Intel(R) 82567V-2 ICH10"),
144 	PVID(0x8086, E1000_DEV_ID_ICH10_D_BM_LM, "Intel(R) 82567LM-3 ICH10"),
145 	PVID(0x8086, E1000_DEV_ID_ICH10_D_BM_LF, "Intel(R) 82567LF-3 ICH10"),
146 	PVID(0x8086, E1000_DEV_ID_ICH10_D_BM_V, "Intel(R) 82567V-4 ICH10"),
147 	PVID(0x8086, E1000_DEV_ID_PCH_M_HV_LM, "Intel(R) 82577LM"),
148 	PVID(0x8086, E1000_DEV_ID_PCH_M_HV_LC, "Intel(R) 82577LC"),
149 	PVID(0x8086, E1000_DEV_ID_PCH_D_HV_DM, "Intel(R) 82578DM"),
150 	PVID(0x8086, E1000_DEV_ID_PCH_D_HV_DC, "Intel(R) 82578DC"),
151 	PVID(0x8086, E1000_DEV_ID_PCH2_LV_LM, "Intel(R) 82579LM"),
152 	PVID(0x8086, E1000_DEV_ID_PCH2_LV_V, "Intel(R) 82579V"),
153 	PVID(0x8086, E1000_DEV_ID_PCH_LPT_I217_LM, "Intel(R) I217-LM LPT"),
154 	PVID(0x8086, E1000_DEV_ID_PCH_LPT_I217_V, "Intel(R) I217-V LPT"),
155 	PVID(0x8086, E1000_DEV_ID_PCH_LPTLP_I218_LM, "Intel(R) I218-LM LPTLP"),
156 	PVID(0x8086, E1000_DEV_ID_PCH_LPTLP_I218_V, "Intel(R) I218-V LPTLP"),
157 	PVID(0x8086, E1000_DEV_ID_PCH_I218_LM2, "Intel(R) I218-LM (2)"),
158 	PVID(0x8086, E1000_DEV_ID_PCH_I218_V2, "Intel(R) I218-V (2)"),
159 	PVID(0x8086, E1000_DEV_ID_PCH_I218_LM3, "Intel(R) I218-LM (3)"),
160 	PVID(0x8086, E1000_DEV_ID_PCH_I218_V3, "Intel(R) I218-V (3)"),
161 	PVID(0x8086, E1000_DEV_ID_PCH_SPT_I219_LM, "Intel(R) I219-LM SPT"),
162 	PVID(0x8086, E1000_DEV_ID_PCH_SPT_I219_V, "Intel(R) I219-V SPT"),
163 	PVID(0x8086, E1000_DEV_ID_PCH_SPT_I219_LM2, "Intel(R) I219-LM SPT-H(2)"),
164 	PVID(0x8086, E1000_DEV_ID_PCH_SPT_I219_V2, "Intel(R) I219-V SPT-H(2)"),
165 	PVID(0x8086, E1000_DEV_ID_PCH_LBG_I219_LM3, "Intel(R) I219-LM LBG(3)"),
166 	PVID(0x8086, E1000_DEV_ID_PCH_SPT_I219_LM4, "Intel(R) I219-LM SPT(4)"),
167 	PVID(0x8086, E1000_DEV_ID_PCH_SPT_I219_V4, "Intel(R) I219-V SPT(4)"),
168 	PVID(0x8086, E1000_DEV_ID_PCH_SPT_I219_LM5, "Intel(R) I219-LM SPT(5)"),
169 	PVID(0x8086, E1000_DEV_ID_PCH_SPT_I219_V5, "Intel(R) I219-V SPT(5)"),
170 	PVID(0x8086, E1000_DEV_ID_PCH_CNP_I219_LM6, "Intel(R) I219-LM CNP(6)"),
171 	PVID(0x8086, E1000_DEV_ID_PCH_CNP_I219_V6, "Intel(R) I219-V CNP(6)"),
172 	PVID(0x8086, E1000_DEV_ID_PCH_CNP_I219_LM7, "Intel(R) I219-LM CNP(7)"),
173 	PVID(0x8086, E1000_DEV_ID_PCH_CNP_I219_V7, "Intel(R) I219-V CNP(7)"),
174 	PVID(0x8086, E1000_DEV_ID_PCH_ICP_I219_LM8, "Intel(R) I219-LM ICP(8)"),
175 	PVID(0x8086, E1000_DEV_ID_PCH_ICP_I219_V8, "Intel(R) I219-V ICP(8)"),
176 	PVID(0x8086, E1000_DEV_ID_PCH_ICP_I219_LM9, "Intel(R) I219-LM ICP(9)"),
177 	PVID(0x8086, E1000_DEV_ID_PCH_ICP_I219_V9, "Intel(R) I219-V ICP(9)"),
178 	PVID(0x8086, E1000_DEV_ID_PCH_CMP_I219_LM10, "Intel(R) I219-LM CMP(10)"),
179 	PVID(0x8086, E1000_DEV_ID_PCH_CMP_I219_V10, "Intel(R) I219-V CMP(10)"),
180 	PVID(0x8086, E1000_DEV_ID_PCH_CMP_I219_LM11, "Intel(R) I219-LM CMP(11)"),
181 	PVID(0x8086, E1000_DEV_ID_PCH_CMP_I219_V11, "Intel(R) I219-V CMP(11)"),
182 	PVID(0x8086, E1000_DEV_ID_PCH_CMP_I219_LM12, "Intel(R) I219-LM CMP(12)"),
183 	PVID(0x8086, E1000_DEV_ID_PCH_CMP_I219_V12, "Intel(R) I219-V CMP(12)"),
184 	PVID(0x8086, E1000_DEV_ID_PCH_TGP_I219_LM13, "Intel(R) I219-LM TGP(13)"),
185 	PVID(0x8086, E1000_DEV_ID_PCH_TGP_I219_V13, "Intel(R) I219-V TGP(13)"),
186 	PVID(0x8086, E1000_DEV_ID_PCH_TGP_I219_LM14, "Intel(R) I219-LM TGP(14)"),
187 	PVID(0x8086, E1000_DEV_ID_PCH_TGP_I219_V14, "Intel(R) I219-V GTP(14)"),
188 	PVID(0x8086, E1000_DEV_ID_PCH_TGP_I219_LM15, "Intel(R) I219-LM TGP(15)"),
189 	PVID(0x8086, E1000_DEV_ID_PCH_TGP_I219_V15, "Intel(R) I219-V TGP(15)"),
190 	PVID(0x8086, E1000_DEV_ID_PCH_ADL_I219_LM16, "Intel(R) I219-LM ADL(16)"),
191 	PVID(0x8086, E1000_DEV_ID_PCH_ADL_I219_V16, "Intel(R) I219-V ADL(16)"),
192 	PVID(0x8086, E1000_DEV_ID_PCH_ADL_I219_LM17, "Intel(R) I219-LM ADL(17)"),
193 	PVID(0x8086, E1000_DEV_ID_PCH_ADL_I219_V17, "Intel(R) I219-V ADL(17)"),
194 	PVID(0x8086, E1000_DEV_ID_PCH_MTP_I219_LM18, "Intel(R) I219-LM MTP(18)"),
195 	PVID(0x8086, E1000_DEV_ID_PCH_MTP_I219_V18, "Intel(R) I219-V MTP(18)"),
196 	PVID(0x8086, E1000_DEV_ID_PCH_MTP_I219_LM19, "Intel(R) I219-LM MTP(19)"),
197 	PVID(0x8086, E1000_DEV_ID_PCH_MTP_I219_V19, "Intel(R) I219-V MTP(19)"),
198 	PVID(0x8086, E1000_DEV_ID_PCH_LNL_I219_LM20, "Intel(R) I219-LM LNL(20)"),
199 	PVID(0x8086, E1000_DEV_ID_PCH_LNL_I219_V20, "Intel(R) I219-V LNL(20)"),
200 	PVID(0x8086, E1000_DEV_ID_PCH_LNL_I219_LM21, "Intel(R) I219-LM LNL(21)"),
201 	PVID(0x8086, E1000_DEV_ID_PCH_LNL_I219_V21, "Intel(R) I219-V LNL(21)"),
202 	PVID(0x8086, E1000_DEV_ID_PCH_RPL_I219_LM22, "Intel(R) I219-LM RPL(22)"),
203 	PVID(0x8086, E1000_DEV_ID_PCH_RPL_I219_V22, "Intel(R) I219-V RPL(22)"),
204 	PVID(0x8086, E1000_DEV_ID_PCH_RPL_I219_LM23, "Intel(R) I219-LM RPL(23)"),
205 	PVID(0x8086, E1000_DEV_ID_PCH_RPL_I219_V23, "Intel(R) I219-V RPL(23)"),
206 	PVID(0x8086, E1000_DEV_ID_PCH_ARL_I219_LM24, "Intel(R) I219-LM ARL(24)"),
207 	PVID(0x8086, E1000_DEV_ID_PCH_ARL_I219_V24, "Intel(R) I219-V ARL(24)"),
208 	PVID(0x8086, E1000_DEV_ID_PCH_PTP_I219_LM25, "Intel(R) I219-LM PTP(25)"),
209 	PVID(0x8086, E1000_DEV_ID_PCH_PTP_I219_V25, "Intel(R) I219-V PTP(25)"),
210 	PVID(0x8086, E1000_DEV_ID_PCH_PTP_I219_LM26, "Intel(R) I219-LM PTP(26)"),
211 	PVID(0x8086, E1000_DEV_ID_PCH_PTP_I219_V26, "Intel(R) I219-V PTP(26)"),
212 	PVID(0x8086, E1000_DEV_ID_PCH_PTP_I219_LM27, "Intel(R) I219-LM PTP(27)"),
213 	PVID(0x8086, E1000_DEV_ID_PCH_PTP_I219_V27, "Intel(R) I219-V PTP(27)"),
214 	/* required last entry */
215 	PVID_END
216 };
217 
218 static pci_vendor_info_t igb_vendor_info_array[] =
219 {
220 	/* Intel(R) - igb-class devices */
221 	PVID(0x8086, E1000_DEV_ID_82575EB_COPPER, "Intel(R) PRO/1000 82575EB (Copper)"),
222 	PVID(0x8086, E1000_DEV_ID_82575EB_FIBER_SERDES, "Intel(R) PRO/1000 82575EB (SERDES)"),
223 	PVID(0x8086, E1000_DEV_ID_82575GB_QUAD_COPPER, "Intel(R) PRO/1000 VT 82575GB (Quad Copper)"),
224 	PVID(0x8086, E1000_DEV_ID_82576, "Intel(R) PRO/1000 82576"),
225 	PVID(0x8086, E1000_DEV_ID_82576_NS, "Intel(R) PRO/1000 82576NS"),
226 	PVID(0x8086, E1000_DEV_ID_82576_NS_SERDES, "Intel(R) PRO/1000 82576NS (SERDES)"),
227 	PVID(0x8086, E1000_DEV_ID_82576_FIBER, "Intel(R) PRO/1000 EF 82576 (Dual Fiber)"),
228 	PVID(0x8086, E1000_DEV_ID_82576_SERDES, "Intel(R) PRO/1000 82576 (Dual SERDES)"),
229 	PVID(0x8086, E1000_DEV_ID_82576_SERDES_QUAD, "Intel(R) PRO/1000 ET 82576 (Quad SERDES)"),
230 	PVID(0x8086, E1000_DEV_ID_82576_QUAD_COPPER, "Intel(R) PRO/1000 ET 82576 (Quad Copper)"),
231 	PVID(0x8086, E1000_DEV_ID_82576_QUAD_COPPER_ET2, "Intel(R) PRO/1000 ET(2) 82576 (Quad Copper)"),
232 	PVID(0x8086, E1000_DEV_ID_82576_VF, "Intel(R) PRO/1000 82576 Virtual Function"),
233 	PVID(0x8086, E1000_DEV_ID_82580_COPPER, "Intel(R) I340 82580 (Copper)"),
234 	PVID(0x8086, E1000_DEV_ID_82580_FIBER, "Intel(R) I340 82580 (Fiber)"),
235 	PVID(0x8086, E1000_DEV_ID_82580_SERDES, "Intel(R) I340 82580 (SERDES)"),
236 	PVID(0x8086, E1000_DEV_ID_82580_SGMII, "Intel(R) I340 82580 (SGMII)"),
237 	PVID(0x8086, E1000_DEV_ID_82580_COPPER_DUAL, "Intel(R) I340-T2 82580 (Dual Copper)"),
238 	PVID(0x8086, E1000_DEV_ID_82580_QUAD_FIBER, "Intel(R) I340-F4 82580 (Quad Fiber)"),
239 	PVID(0x8086, E1000_DEV_ID_DH89XXCC_SERDES, "Intel(R) DH89XXCC (SERDES)"),
240 	PVID(0x8086, E1000_DEV_ID_DH89XXCC_SGMII, "Intel(R) I347-AT4 DH89XXCC"),
241 	PVID(0x8086, E1000_DEV_ID_DH89XXCC_SFP, "Intel(R) DH89XXCC (SFP)"),
242 	PVID(0x8086, E1000_DEV_ID_DH89XXCC_BACKPLANE, "Intel(R) DH89XXCC (Backplane)"),
243 	PVID(0x8086, E1000_DEV_ID_I350_COPPER, "Intel(R) I350 (Copper)"),
244 	PVID(0x8086, E1000_DEV_ID_I350_FIBER, "Intel(R) I350 (Fiber)"),
245 	PVID(0x8086, E1000_DEV_ID_I350_SERDES, "Intel(R) I350 (SERDES)"),
246 	PVID(0x8086, E1000_DEV_ID_I350_SGMII, "Intel(R) I350 (SGMII)"),
247 	PVID(0x8086, E1000_DEV_ID_I350_VF, "Intel(R) I350 Virtual Function"),
248 	PVID(0x8086, E1000_DEV_ID_I210_COPPER, "Intel(R) I210 (Copper)"),
249 	PVID(0x8086, E1000_DEV_ID_I210_COPPER_IT, "Intel(R) I210 IT (Copper)"),
250 	PVID(0x8086, E1000_DEV_ID_I210_COPPER_OEM1, "Intel(R) I210 (OEM)"),
251 	PVID(0x8086, E1000_DEV_ID_I210_COPPER_FLASHLESS, "Intel(R) I210 Flashless (Copper)"),
252 	PVID(0x8086, E1000_DEV_ID_I210_SERDES_FLASHLESS, "Intel(R) I210 Flashless (SERDES)"),
253 	PVID(0x8086, E1000_DEV_ID_I210_SGMII_FLASHLESS, "Intel(R) I210 Flashless (SGMII)"),
254 	PVID(0x8086, E1000_DEV_ID_I210_FIBER, "Intel(R) I210 (Fiber)"),
255 	PVID(0x8086, E1000_DEV_ID_I210_SERDES, "Intel(R) I210 (SERDES)"),
256 	PVID(0x8086, E1000_DEV_ID_I210_SGMII, "Intel(R) I210 (SGMII)"),
257 	PVID(0x8086, E1000_DEV_ID_I211_COPPER, "Intel(R) I211 (Copper)"),
258 	PVID(0x8086, E1000_DEV_ID_I354_BACKPLANE_1GBPS, "Intel(R) I354 (1.0 GbE Backplane)"),
259 	PVID(0x8086, E1000_DEV_ID_I354_BACKPLANE_2_5GBPS, "Intel(R) I354 (2.5 GbE Backplane)"),
260 	PVID(0x8086, E1000_DEV_ID_I354_SGMII, "Intel(R) I354 (SGMII)"),
261 	/* required last entry */
262 	PVID_END
263 };
264 
265 /*********************************************************************
266  *  Function prototypes
267  *********************************************************************/
268 static void	*em_register(device_t);
269 static void	*igb_register(device_t);
270 static int	em_if_attach_pre(if_ctx_t);
271 static int	em_if_attach_post(if_ctx_t);
272 static int	em_if_detach(if_ctx_t);
273 static int	em_if_shutdown(if_ctx_t);
274 static int	em_if_suspend(if_ctx_t);
275 static int	em_if_resume(if_ctx_t);
276 
277 static int	em_if_tx_queues_alloc(if_ctx_t, caddr_t *, uint64_t *, int, int);
278 static int	em_if_rx_queues_alloc(if_ctx_t, caddr_t *, uint64_t *, int, int);
279 static void	em_if_queues_free(if_ctx_t);
280 
281 static uint64_t	em_if_get_counter(if_ctx_t, ift_counter);
282 static void	em_if_init(if_ctx_t);
283 static void	em_if_stop(if_ctx_t);
284 static void	em_if_media_status(if_ctx_t, struct ifmediareq *);
285 static int	em_if_media_change(if_ctx_t);
286 static int	em_if_mtu_set(if_ctx_t, uint32_t);
287 static void	em_if_timer(if_ctx_t, uint16_t);
288 static void	em_if_vlan_register(if_ctx_t, u16);
289 static void	em_if_vlan_unregister(if_ctx_t, u16);
290 static void	em_if_watchdog_reset(if_ctx_t);
291 static bool	em_if_needs_restart(if_ctx_t, enum iflib_restart_event);
292 
293 static void	em_identify_hardware(if_ctx_t);
294 static int	em_allocate_pci_resources(if_ctx_t);
295 static void	em_free_pci_resources(if_ctx_t);
296 static void	em_reset(if_ctx_t);
297 static int	em_setup_interface(if_ctx_t);
298 static int	em_setup_msix(if_ctx_t);
299 
300 static void	em_initialize_transmit_unit(if_ctx_t);
301 static void	em_initialize_receive_unit(if_ctx_t);
302 
303 static void	em_if_intr_enable(if_ctx_t);
304 static void	em_if_intr_disable(if_ctx_t);
305 static void	igb_if_intr_enable(if_ctx_t);
306 static void	igb_if_intr_disable(if_ctx_t);
307 static int	em_if_rx_queue_intr_enable(if_ctx_t, uint16_t);
308 static int	em_if_tx_queue_intr_enable(if_ctx_t, uint16_t);
309 static int	igb_if_rx_queue_intr_enable(if_ctx_t, uint16_t);
310 static int	igb_if_tx_queue_intr_enable(if_ctx_t, uint16_t);
311 static void	em_if_multi_set(if_ctx_t);
312 static void	em_if_update_admin_status(if_ctx_t);
313 static void	em_if_debug(if_ctx_t);
314 static void	em_update_stats_counters(struct e1000_softc *);
315 static void	em_add_hw_stats(struct e1000_softc *);
316 static int	em_if_set_promisc(if_ctx_t, int);
317 static bool	em_if_vlan_filter_capable(if_ctx_t);
318 static bool	em_if_vlan_filter_used(if_ctx_t);
319 static void	em_if_vlan_filter_enable(struct e1000_softc *);
320 static void	em_if_vlan_filter_disable(struct e1000_softc *);
321 static void	em_if_vlan_filter_write(struct e1000_softc *);
322 static void	em_setup_vlan_hw_support(if_ctx_t ctx);
323 static int	em_sysctl_nvm_info(SYSCTL_HANDLER_ARGS);
324 static void	em_print_nvm_info(struct e1000_softc *);
325 static void	em_fw_version_locked(if_ctx_t);
326 static void	em_sbuf_fw_version(struct e1000_fw_version *, struct sbuf *);
327 static void	em_print_fw_version(struct e1000_softc *);
328 static int	em_sysctl_print_fw_version(SYSCTL_HANDLER_ARGS);
329 static int	em_sysctl_debug_info(SYSCTL_HANDLER_ARGS);
330 static int	em_get_rs(SYSCTL_HANDLER_ARGS);
331 static void	em_print_debug_info(struct e1000_softc *);
332 static int 	em_is_valid_ether_addr(u8 *);
333 static int	em_sysctl_int_delay(SYSCTL_HANDLER_ARGS);
334 static void	em_add_int_delay_sysctl(struct e1000_softc *, const char *,
335 		    const char *, struct em_int_delay_info *, int, int);
336 /* Management and WOL Support */
337 static void	em_init_manageability(struct e1000_softc *);
338 static void	em_release_manageability(struct e1000_softc *);
339 static void	em_get_hw_control(struct e1000_softc *);
340 static void	em_release_hw_control(struct e1000_softc *);
341 static void	em_get_wakeup(if_ctx_t);
342 static void	em_enable_wakeup(if_ctx_t);
343 static int	em_enable_phy_wakeup(struct e1000_softc *);
344 static void	em_disable_aspm(struct e1000_softc *);
345 
346 int		em_intr(void *);
347 
348 /* MSI-X handlers */
349 static int	em_if_msix_intr_assign(if_ctx_t, int);
350 static int	em_msix_link(void *);
351 static void	em_handle_link(void *);
352 
353 static void	em_enable_vectors_82574(if_ctx_t);
354 
355 static int	em_set_flowcntl(SYSCTL_HANDLER_ARGS);
356 static int	em_sysctl_eee(SYSCTL_HANDLER_ARGS);
357 static void	em_if_led_func(if_ctx_t, int);
358 
359 static int	em_get_regs(SYSCTL_HANDLER_ARGS);
360 
361 static void	lem_smartspeed(struct e1000_softc *);
362 static void	igb_configure_queues(struct e1000_softc *);
363 static void	em_flush_desc_rings(struct e1000_softc *);
364 
365 
366 /*********************************************************************
367  *  FreeBSD Device Interface Entry Points
368  *********************************************************************/
369 static device_method_t em_methods[] = {
370 	/* Device interface */
371 	DEVMETHOD(device_register, em_register),
372 	DEVMETHOD(device_probe, iflib_device_probe),
373 	DEVMETHOD(device_attach, iflib_device_attach),
374 	DEVMETHOD(device_detach, iflib_device_detach),
375 	DEVMETHOD(device_shutdown, iflib_device_shutdown),
376 	DEVMETHOD(device_suspend, iflib_device_suspend),
377 	DEVMETHOD(device_resume, iflib_device_resume),
378 	DEVMETHOD_END
379 };
380 
381 static device_method_t igb_methods[] = {
382 	/* Device interface */
383 	DEVMETHOD(device_register, igb_register),
384 	DEVMETHOD(device_probe, iflib_device_probe),
385 	DEVMETHOD(device_attach, iflib_device_attach),
386 	DEVMETHOD(device_detach, iflib_device_detach),
387 	DEVMETHOD(device_shutdown, iflib_device_shutdown),
388 	DEVMETHOD(device_suspend, iflib_device_suspend),
389 	DEVMETHOD(device_resume, iflib_device_resume),
390 	DEVMETHOD_END
391 };
392 
393 
394 static driver_t em_driver = {
395 	"em", em_methods, sizeof(struct e1000_softc),
396 };
397 
398 DRIVER_MODULE(em, pci, em_driver, 0, 0);
399 
400 MODULE_DEPEND(em, pci, 1, 1, 1);
401 MODULE_DEPEND(em, ether, 1, 1, 1);
402 MODULE_DEPEND(em, iflib, 1, 1, 1);
403 
404 IFLIB_PNP_INFO(pci, em, em_vendor_info_array);
405 
406 static driver_t igb_driver = {
407 	"igb", igb_methods, sizeof(struct e1000_softc),
408 };
409 
410 DRIVER_MODULE(igb, pci, igb_driver, 0, 0);
411 
412 MODULE_DEPEND(igb, pci, 1, 1, 1);
413 MODULE_DEPEND(igb, ether, 1, 1, 1);
414 MODULE_DEPEND(igb, iflib, 1, 1, 1);
415 
416 IFLIB_PNP_INFO(pci, igb, igb_vendor_info_array);
417 
418 static device_method_t em_if_methods[] = {
419 	DEVMETHOD(ifdi_attach_pre, em_if_attach_pre),
420 	DEVMETHOD(ifdi_attach_post, em_if_attach_post),
421 	DEVMETHOD(ifdi_detach, em_if_detach),
422 	DEVMETHOD(ifdi_shutdown, em_if_shutdown),
423 	DEVMETHOD(ifdi_suspend, em_if_suspend),
424 	DEVMETHOD(ifdi_resume, em_if_resume),
425 	DEVMETHOD(ifdi_init, em_if_init),
426 	DEVMETHOD(ifdi_stop, em_if_stop),
427 	DEVMETHOD(ifdi_msix_intr_assign, em_if_msix_intr_assign),
428 	DEVMETHOD(ifdi_intr_enable, em_if_intr_enable),
429 	DEVMETHOD(ifdi_intr_disable, em_if_intr_disable),
430 	DEVMETHOD(ifdi_tx_queues_alloc, em_if_tx_queues_alloc),
431 	DEVMETHOD(ifdi_rx_queues_alloc, em_if_rx_queues_alloc),
432 	DEVMETHOD(ifdi_queues_free, em_if_queues_free),
433 	DEVMETHOD(ifdi_update_admin_status, em_if_update_admin_status),
434 	DEVMETHOD(ifdi_multi_set, em_if_multi_set),
435 	DEVMETHOD(ifdi_media_status, em_if_media_status),
436 	DEVMETHOD(ifdi_media_change, em_if_media_change),
437 	DEVMETHOD(ifdi_mtu_set, em_if_mtu_set),
438 	DEVMETHOD(ifdi_promisc_set, em_if_set_promisc),
439 	DEVMETHOD(ifdi_timer, em_if_timer),
440 	DEVMETHOD(ifdi_watchdog_reset, em_if_watchdog_reset),
441 	DEVMETHOD(ifdi_vlan_register, em_if_vlan_register),
442 	DEVMETHOD(ifdi_vlan_unregister, em_if_vlan_unregister),
443 	DEVMETHOD(ifdi_get_counter, em_if_get_counter),
444 	DEVMETHOD(ifdi_led_func, em_if_led_func),
445 	DEVMETHOD(ifdi_rx_queue_intr_enable, em_if_rx_queue_intr_enable),
446 	DEVMETHOD(ifdi_tx_queue_intr_enable, em_if_tx_queue_intr_enable),
447 	DEVMETHOD(ifdi_debug, em_if_debug),
448 	DEVMETHOD(ifdi_needs_restart, em_if_needs_restart),
449 	DEVMETHOD_END
450 };
451 
452 static driver_t em_if_driver = {
453 	"em_if", em_if_methods, sizeof(struct e1000_softc)
454 };
455 
456 static device_method_t igb_if_methods[] = {
457 	DEVMETHOD(ifdi_attach_pre, em_if_attach_pre),
458 	DEVMETHOD(ifdi_attach_post, em_if_attach_post),
459 	DEVMETHOD(ifdi_detach, em_if_detach),
460 	DEVMETHOD(ifdi_shutdown, em_if_shutdown),
461 	DEVMETHOD(ifdi_suspend, em_if_suspend),
462 	DEVMETHOD(ifdi_resume, em_if_resume),
463 	DEVMETHOD(ifdi_init, em_if_init),
464 	DEVMETHOD(ifdi_stop, em_if_stop),
465 	DEVMETHOD(ifdi_msix_intr_assign, em_if_msix_intr_assign),
466 	DEVMETHOD(ifdi_intr_enable, igb_if_intr_enable),
467 	DEVMETHOD(ifdi_intr_disable, igb_if_intr_disable),
468 	DEVMETHOD(ifdi_tx_queues_alloc, em_if_tx_queues_alloc),
469 	DEVMETHOD(ifdi_rx_queues_alloc, em_if_rx_queues_alloc),
470 	DEVMETHOD(ifdi_queues_free, em_if_queues_free),
471 	DEVMETHOD(ifdi_update_admin_status, em_if_update_admin_status),
472 	DEVMETHOD(ifdi_multi_set, em_if_multi_set),
473 	DEVMETHOD(ifdi_media_status, em_if_media_status),
474 	DEVMETHOD(ifdi_media_change, em_if_media_change),
475 	DEVMETHOD(ifdi_mtu_set, em_if_mtu_set),
476 	DEVMETHOD(ifdi_promisc_set, em_if_set_promisc),
477 	DEVMETHOD(ifdi_timer, em_if_timer),
478 	DEVMETHOD(ifdi_watchdog_reset, em_if_watchdog_reset),
479 	DEVMETHOD(ifdi_vlan_register, em_if_vlan_register),
480 	DEVMETHOD(ifdi_vlan_unregister, em_if_vlan_unregister),
481 	DEVMETHOD(ifdi_get_counter, em_if_get_counter),
482 	DEVMETHOD(ifdi_led_func, em_if_led_func),
483 	DEVMETHOD(ifdi_rx_queue_intr_enable, igb_if_rx_queue_intr_enable),
484 	DEVMETHOD(ifdi_tx_queue_intr_enable, igb_if_tx_queue_intr_enable),
485 	DEVMETHOD(ifdi_debug, em_if_debug),
486 	DEVMETHOD(ifdi_needs_restart, em_if_needs_restart),
487 	DEVMETHOD_END
488 };
489 
490 static driver_t igb_if_driver = {
491 	"igb_if", igb_if_methods, sizeof(struct e1000_softc)
492 };
493 
494 /*********************************************************************
495  *  Tunable default values.
496  *********************************************************************/
497 
498 #define EM_TICKS_TO_USECS(ticks)	((1024 * (ticks) + 500) / 1000)
499 #define EM_USECS_TO_TICKS(usecs)	((1000 * (usecs) + 512) / 1024)
500 
501 #define MAX_INTS_PER_SEC	8000
502 #define DEFAULT_ITR		(1000000000/(MAX_INTS_PER_SEC * 256))
503 
504 /* Allow common code without TSO */
505 #ifndef CSUM_TSO
506 #define CSUM_TSO	0
507 #endif
508 
509 static SYSCTL_NODE(_hw, OID_AUTO, em, CTLFLAG_RD | CTLFLAG_MPSAFE, 0,
510     "EM driver parameters");
511 
512 static int em_disable_crc_stripping = 0;
513 SYSCTL_INT(_hw_em, OID_AUTO, disable_crc_stripping, CTLFLAG_RDTUN,
514     &em_disable_crc_stripping, 0, "Disable CRC Stripping");
515 
516 static int em_tx_int_delay_dflt = EM_TICKS_TO_USECS(EM_TIDV);
517 static int em_rx_int_delay_dflt = EM_TICKS_TO_USECS(EM_RDTR);
518 SYSCTL_INT(_hw_em, OID_AUTO, tx_int_delay, CTLFLAG_RDTUN, &em_tx_int_delay_dflt,
519     0, "Default transmit interrupt delay in usecs");
520 SYSCTL_INT(_hw_em, OID_AUTO, rx_int_delay, CTLFLAG_RDTUN, &em_rx_int_delay_dflt,
521     0, "Default receive interrupt delay in usecs");
522 
523 static int em_tx_abs_int_delay_dflt = EM_TICKS_TO_USECS(EM_TADV);
524 static int em_rx_abs_int_delay_dflt = EM_TICKS_TO_USECS(EM_RADV);
525 SYSCTL_INT(_hw_em, OID_AUTO, tx_abs_int_delay, CTLFLAG_RDTUN,
526     &em_tx_abs_int_delay_dflt, 0,
527     "Default transmit interrupt delay limit in usecs");
528 SYSCTL_INT(_hw_em, OID_AUTO, rx_abs_int_delay, CTLFLAG_RDTUN,
529     &em_rx_abs_int_delay_dflt, 0,
530     "Default receive interrupt delay limit in usecs");
531 
532 static int em_smart_pwr_down = false;
533 SYSCTL_INT(_hw_em, OID_AUTO, smart_pwr_down, CTLFLAG_RDTUN, &em_smart_pwr_down,
534     0, "Set to true to leave smart power down enabled on newer adapters");
535 
536 /* Controls whether promiscuous also shows bad packets */
537 static int em_debug_sbp = false;
538 SYSCTL_INT(_hw_em, OID_AUTO, sbp, CTLFLAG_RDTUN, &em_debug_sbp, 0,
539     "Show bad packets in promiscuous mode");
540 
541 /* How many packets rxeof tries to clean at a time */
542 static int em_rx_process_limit = 100;
543 SYSCTL_INT(_hw_em, OID_AUTO, rx_process_limit, CTLFLAG_RDTUN,
544     &em_rx_process_limit, 0,
545     "Maximum number of received packets to process "
546     "at a time, -1 means unlimited");
547 
548 /* Energy efficient ethernet - default to OFF */
549 static int eee_setting = 1;
550 SYSCTL_INT(_hw_em, OID_AUTO, eee_setting, CTLFLAG_RDTUN, &eee_setting, 0,
551     "Enable Energy Efficient Ethernet");
552 
553 /*
554 ** Tuneable Interrupt rate
555 */
556 static int em_max_interrupt_rate = 8000;
557 SYSCTL_INT(_hw_em, OID_AUTO, max_interrupt_rate, CTLFLAG_RDTUN,
558     &em_max_interrupt_rate, 0, "Maximum interrupts per second");
559 
560 
561 
562 /* Global used in WOL setup with multiport cards */
563 static int global_quad_port_a = 0;
564 
565 extern struct if_txrx igb_txrx;
566 extern struct if_txrx em_txrx;
567 extern struct if_txrx lem_txrx;
568 
569 static struct if_shared_ctx em_sctx_init = {
570 	.isc_magic = IFLIB_MAGIC,
571 	.isc_q_align = PAGE_SIZE,
572 	.isc_tx_maxsize = EM_TSO_SIZE + sizeof(struct ether_vlan_header),
573 	.isc_tx_maxsegsize = PAGE_SIZE,
574 	.isc_tso_maxsize = EM_TSO_SIZE + sizeof(struct ether_vlan_header),
575 	.isc_tso_maxsegsize = EM_TSO_SEG_SIZE,
576 	.isc_rx_maxsize = MJUM9BYTES,
577 	.isc_rx_nsegments = 1,
578 	.isc_rx_maxsegsize = MJUM9BYTES,
579 	.isc_nfl = 1,
580 	.isc_nrxqs = 1,
581 	.isc_ntxqs = 1,
582 	.isc_admin_intrcnt = 1,
583 	.isc_vendor_info = em_vendor_info_array,
584 	.isc_driver_version = em_driver_version,
585 	.isc_driver = &em_if_driver,
586 	.isc_flags = IFLIB_NEED_SCRATCH | IFLIB_TSO_INIT_IP | IFLIB_NEED_ZERO_CSUM,
587 
588 	.isc_nrxd_min = {EM_MIN_RXD},
589 	.isc_ntxd_min = {EM_MIN_TXD},
590 	.isc_nrxd_max = {EM_MAX_RXD},
591 	.isc_ntxd_max = {EM_MAX_TXD},
592 	.isc_nrxd_default = {EM_DEFAULT_RXD},
593 	.isc_ntxd_default = {EM_DEFAULT_TXD},
594 };
595 
596 static struct if_shared_ctx igb_sctx_init = {
597 	.isc_magic = IFLIB_MAGIC,
598 	.isc_q_align = PAGE_SIZE,
599 	.isc_tx_maxsize = EM_TSO_SIZE + sizeof(struct ether_vlan_header),
600 	.isc_tx_maxsegsize = PAGE_SIZE,
601 	.isc_tso_maxsize = EM_TSO_SIZE + sizeof(struct ether_vlan_header),
602 	.isc_tso_maxsegsize = EM_TSO_SEG_SIZE,
603 	.isc_rx_maxsize = MJUM9BYTES,
604 	.isc_rx_nsegments = 1,
605 	.isc_rx_maxsegsize = MJUM9BYTES,
606 	.isc_nfl = 1,
607 	.isc_nrxqs = 1,
608 	.isc_ntxqs = 1,
609 	.isc_admin_intrcnt = 1,
610 	.isc_vendor_info = igb_vendor_info_array,
611 	.isc_driver_version = igb_driver_version,
612 	.isc_driver = &igb_if_driver,
613 	.isc_flags = IFLIB_NEED_SCRATCH | IFLIB_TSO_INIT_IP | IFLIB_NEED_ZERO_CSUM,
614 
615 	.isc_nrxd_min = {EM_MIN_RXD},
616 	.isc_ntxd_min = {EM_MIN_TXD},
617 	.isc_nrxd_max = {IGB_MAX_RXD},
618 	.isc_ntxd_max = {IGB_MAX_TXD},
619 	.isc_nrxd_default = {EM_DEFAULT_RXD},
620 	.isc_ntxd_default = {EM_DEFAULT_TXD},
621 };
622 
623 /*****************************************************************
624  *
625  * Dump Registers
626  *
627  ****************************************************************/
628 #define IGB_REGS_LEN 739
629 
630 static int em_get_regs(SYSCTL_HANDLER_ARGS)
631 {
632 	struct e1000_softc *sc = (struct e1000_softc *)arg1;
633 	struct e1000_hw *hw = &sc->hw;
634 	struct sbuf *sb;
635 	u32 *regs_buff;
636 	int rc;
637 
638 	regs_buff = malloc(sizeof(u32) * IGB_REGS_LEN, M_DEVBUF, M_WAITOK);
639 	memset(regs_buff, 0, IGB_REGS_LEN * sizeof(u32));
640 
641 	rc = sysctl_wire_old_buffer(req, 0);
642 	MPASS(rc == 0);
643 	if (rc != 0) {
644 		free(regs_buff, M_DEVBUF);
645 		return (rc);
646 	}
647 
648 	sb = sbuf_new_for_sysctl(NULL, NULL, 32*400, req);
649 	MPASS(sb != NULL);
650 	if (sb == NULL) {
651 		free(regs_buff, M_DEVBUF);
652 		return (ENOMEM);
653 	}
654 
655 	/* General Registers */
656 	regs_buff[0] = E1000_READ_REG(hw, E1000_CTRL);
657 	regs_buff[1] = E1000_READ_REG(hw, E1000_STATUS);
658 	regs_buff[2] = E1000_READ_REG(hw, E1000_CTRL_EXT);
659 	regs_buff[3] = E1000_READ_REG(hw, E1000_ICR);
660 	regs_buff[4] = E1000_READ_REG(hw, E1000_RCTL);
661 	regs_buff[5] = E1000_READ_REG(hw, E1000_RDLEN(0));
662 	regs_buff[6] = E1000_READ_REG(hw, E1000_RDH(0));
663 	regs_buff[7] = E1000_READ_REG(hw, E1000_RDT(0));
664 	regs_buff[8] = E1000_READ_REG(hw, E1000_RXDCTL(0));
665 	regs_buff[9] = E1000_READ_REG(hw, E1000_RDBAL(0));
666 	regs_buff[10] = E1000_READ_REG(hw, E1000_RDBAH(0));
667 	regs_buff[11] = E1000_READ_REG(hw, E1000_TCTL);
668 	regs_buff[12] = E1000_READ_REG(hw, E1000_TDBAL(0));
669 	regs_buff[13] = E1000_READ_REG(hw, E1000_TDBAH(0));
670 	regs_buff[14] = E1000_READ_REG(hw, E1000_TDLEN(0));
671 	regs_buff[15] = E1000_READ_REG(hw, E1000_TDH(0));
672 	regs_buff[16] = E1000_READ_REG(hw, E1000_TDT(0));
673 	regs_buff[17] = E1000_READ_REG(hw, E1000_TXDCTL(0));
674 	regs_buff[18] = E1000_READ_REG(hw, E1000_TDFH);
675 	regs_buff[19] = E1000_READ_REG(hw, E1000_TDFT);
676 	regs_buff[20] = E1000_READ_REG(hw, E1000_TDFHS);
677 	regs_buff[21] = E1000_READ_REG(hw, E1000_TDFPC);
678 
679 	sbuf_printf(sb, "General Registers\n");
680 	sbuf_printf(sb, "\tCTRL\t %08x\n", regs_buff[0]);
681 	sbuf_printf(sb, "\tSTATUS\t %08x\n", regs_buff[1]);
682 	sbuf_printf(sb, "\tCTRL_EXT\t %08x\n\n", regs_buff[2]);
683 
684 	sbuf_printf(sb, "Interrupt Registers\n");
685 	sbuf_printf(sb, "\tICR\t %08x\n\n", regs_buff[3]);
686 
687 	sbuf_printf(sb, "RX Registers\n");
688 	sbuf_printf(sb, "\tRCTL\t %08x\n", regs_buff[4]);
689 	sbuf_printf(sb, "\tRDLEN\t %08x\n", regs_buff[5]);
690 	sbuf_printf(sb, "\tRDH\t %08x\n", regs_buff[6]);
691 	sbuf_printf(sb, "\tRDT\t %08x\n", regs_buff[7]);
692 	sbuf_printf(sb, "\tRXDCTL\t %08x\n", regs_buff[8]);
693 	sbuf_printf(sb, "\tRDBAL\t %08x\n", regs_buff[9]);
694 	sbuf_printf(sb, "\tRDBAH\t %08x\n\n", regs_buff[10]);
695 
696 	sbuf_printf(sb, "TX Registers\n");
697 	sbuf_printf(sb, "\tTCTL\t %08x\n", regs_buff[11]);
698 	sbuf_printf(sb, "\tTDBAL\t %08x\n", regs_buff[12]);
699 	sbuf_printf(sb, "\tTDBAH\t %08x\n", regs_buff[13]);
700 	sbuf_printf(sb, "\tTDLEN\t %08x\n", regs_buff[14]);
701 	sbuf_printf(sb, "\tTDH\t %08x\n", regs_buff[15]);
702 	sbuf_printf(sb, "\tTDT\t %08x\n", regs_buff[16]);
703 	sbuf_printf(sb, "\tTXDCTL\t %08x\n", regs_buff[17]);
704 	sbuf_printf(sb, "\tTDFH\t %08x\n", regs_buff[18]);
705 	sbuf_printf(sb, "\tTDFT\t %08x\n", regs_buff[19]);
706 	sbuf_printf(sb, "\tTDFHS\t %08x\n", regs_buff[20]);
707 	sbuf_printf(sb, "\tTDFPC\t %08x\n\n", regs_buff[21]);
708 
709 	free(regs_buff, M_DEVBUF);
710 
711 #ifdef DUMP_DESCS
712 	{
713 		if_softc_ctx_t scctx = sc->shared;
714 		struct rx_ring *rxr = &rx_que->rxr;
715 		struct tx_ring *txr = &tx_que->txr;
716 		int ntxd = scctx->isc_ntxd[0];
717 		int nrxd = scctx->isc_nrxd[0];
718 		int j;
719 
720 	for (j = 0; j < nrxd; j++) {
721 		u32 staterr = le32toh(rxr->rx_base[j].wb.upper.status_error);
722 		u32 length =  le32toh(rxr->rx_base[j].wb.upper.length);
723 		sbuf_printf(sb, "\tReceive Descriptor Address %d: %08" PRIx64 "  Error:%d  Length:%d\n", j, rxr->rx_base[j].read.buffer_addr, staterr, length);
724 	}
725 
726 	for (j = 0; j < min(ntxd, 256); j++) {
727 		unsigned int *ptr = (unsigned int *)&txr->tx_base[j];
728 
729 		sbuf_printf(sb, "\tTXD[%03d] [0]: %08x [1]: %08x [2]: %08x [3]: %08x  eop: %d DD=%d\n",
730 			    j, ptr[0], ptr[1], ptr[2], ptr[3], buf->eop,
731 			    buf->eop != -1 ? txr->tx_base[buf->eop].upper.fields.status & E1000_TXD_STAT_DD : 0);
732 
733 	}
734 	}
735 #endif
736 
737 	rc = sbuf_finish(sb);
738 	sbuf_delete(sb);
739 	return(rc);
740 }
741 
742 static void *
743 em_register(device_t dev)
744 {
745 	return (&em_sctx_init);
746 }
747 
748 static void *
749 igb_register(device_t dev)
750 {
751 	return (&igb_sctx_init);
752 }
753 
754 static int
755 em_set_num_queues(if_ctx_t ctx)
756 {
757 	struct e1000_softc *sc = iflib_get_softc(ctx);
758 	int maxqueues;
759 
760 	/* Sanity check based on HW */
761 	switch (sc->hw.mac.type) {
762 	case e1000_82576:
763 	case e1000_82580:
764 	case e1000_i350:
765 	case e1000_i354:
766 		maxqueues = 8;
767 		break;
768 	case e1000_i210:
769 	case e1000_82575:
770 		maxqueues = 4;
771 		break;
772 	case e1000_i211:
773 	case e1000_82574:
774 		maxqueues = 2;
775 		break;
776 	default:
777 		maxqueues = 1;
778 		break;
779 	}
780 
781 	return (maxqueues);
782 }
783 
784 #define	LEM_CAPS							\
785     IFCAP_HWCSUM | IFCAP_VLAN_MTU | IFCAP_VLAN_HWTAGGING |		\
786     IFCAP_VLAN_HWCSUM | IFCAP_WOL | IFCAP_VLAN_HWFILTER
787 
788 #define	EM_CAPS								\
789     IFCAP_HWCSUM | IFCAP_VLAN_MTU | IFCAP_VLAN_HWTAGGING |		\
790     IFCAP_VLAN_HWCSUM | IFCAP_WOL | IFCAP_VLAN_HWFILTER | IFCAP_TSO4 |	\
791     IFCAP_LRO | IFCAP_VLAN_HWTSO
792 
793 #define	IGB_CAPS							\
794     IFCAP_HWCSUM | IFCAP_VLAN_MTU | IFCAP_VLAN_HWTAGGING |		\
795     IFCAP_VLAN_HWCSUM | IFCAP_WOL | IFCAP_VLAN_HWFILTER | IFCAP_TSO4 |	\
796     IFCAP_LRO | IFCAP_VLAN_HWTSO | IFCAP_JUMBO_MTU | IFCAP_HWCSUM_IPV6 |\
797     IFCAP_TSO6
798 
799 /*********************************************************************
800  *  Device initialization routine
801  *
802  *  The attach entry point is called when the driver is being loaded.
803  *  This routine identifies the type of hardware, allocates all resources
804  *  and initializes the hardware.
805  *
806  *  return 0 on success, positive on failure
807  *********************************************************************/
808 static int
809 em_if_attach_pre(if_ctx_t ctx)
810 {
811 	struct e1000_softc *sc;
812 	if_softc_ctx_t scctx;
813 	device_t dev;
814 	struct e1000_hw *hw;
815 	struct sysctl_oid_list *child;
816 	struct sysctl_ctx_list *ctx_list;
817 	int error = 0;
818 
819 	INIT_DEBUGOUT("em_if_attach_pre: begin");
820 	dev = iflib_get_dev(ctx);
821 	sc = iflib_get_softc(ctx);
822 
823 	sc->ctx = sc->osdep.ctx = ctx;
824 	sc->dev = sc->osdep.dev = dev;
825 	scctx = sc->shared = iflib_get_softc_ctx(ctx);
826 	sc->media = iflib_get_media(ctx);
827 	hw = &sc->hw;
828 
829 	sc->tx_process_limit = scctx->isc_ntxd[0];
830 
831 	/* Determine hardware and mac info */
832 	em_identify_hardware(ctx);
833 
834 	/* SYSCTL stuff */
835 	ctx_list = device_get_sysctl_ctx(dev);
836 	child = SYSCTL_CHILDREN(device_get_sysctl_tree(dev));
837 
838 	SYSCTL_ADD_PROC(ctx_list, child, OID_AUTO, "nvm",
839 	    CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_NEEDGIANT, sc, 0,
840 	    em_sysctl_nvm_info, "I", "NVM Information");
841 
842 	SYSCTL_ADD_PROC(ctx_list, child, OID_AUTO, "fw_version",
843 	    CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_NEEDGIANT, sc, 0,
844 	    em_sysctl_print_fw_version, "A",
845 	    "Prints FW/NVM Versions");
846 
847 	SYSCTL_ADD_PROC(ctx_list, child, OID_AUTO, "debug",
848 	    CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_NEEDGIANT, sc, 0,
849 	    em_sysctl_debug_info, "I", "Debug Information");
850 
851 	SYSCTL_ADD_PROC(ctx_list, child, OID_AUTO, "fc",
852 	    CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_NEEDGIANT, sc, 0,
853 	    em_set_flowcntl, "I", "Flow Control");
854 
855 	SYSCTL_ADD_PROC(ctx_list, child, OID_AUTO, "reg_dump",
856 	    CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_NEEDGIANT, sc, 0,
857 	    em_get_regs, "A", "Dump Registers");
858 
859 	SYSCTL_ADD_PROC(ctx_list, child, OID_AUTO, "rs_dump",
860 	    CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_NEEDGIANT, sc, 0,
861 	    em_get_rs, "I", "Dump RS indexes");
862 
863 	scctx->isc_tx_nsegments = EM_MAX_SCATTER;
864 	scctx->isc_nrxqsets_max = scctx->isc_ntxqsets_max = em_set_num_queues(ctx);
865 	if (bootverbose)
866 		device_printf(dev, "attach_pre capping queues at %d\n",
867 		    scctx->isc_ntxqsets_max);
868 
869 	if (hw->mac.type >= igb_mac_min) {
870 		scctx->isc_txqsizes[0] = roundup2(scctx->isc_ntxd[0] * sizeof(union e1000_adv_tx_desc), EM_DBA_ALIGN);
871 		scctx->isc_rxqsizes[0] = roundup2(scctx->isc_nrxd[0] * sizeof(union e1000_adv_rx_desc), EM_DBA_ALIGN);
872 		scctx->isc_txd_size[0] = sizeof(union e1000_adv_tx_desc);
873 		scctx->isc_rxd_size[0] = sizeof(union e1000_adv_rx_desc);
874 		scctx->isc_txrx = &igb_txrx;
875 		scctx->isc_tx_tso_segments_max = EM_MAX_SCATTER;
876 		scctx->isc_tx_tso_size_max = EM_TSO_SIZE;
877 		scctx->isc_tx_tso_segsize_max = EM_TSO_SEG_SIZE;
878 		scctx->isc_capabilities = scctx->isc_capenable = IGB_CAPS;
879 		scctx->isc_tx_csum_flags = CSUM_TCP | CSUM_UDP | CSUM_TSO |
880 		     CSUM_IP6_TCP | CSUM_IP6_UDP;
881 		if (hw->mac.type != e1000_82575)
882 			scctx->isc_tx_csum_flags |= CSUM_SCTP | CSUM_IP6_SCTP;
883 		/*
884 		** Some new devices, as with ixgbe, now may
885 		** use a different BAR, so we need to keep
886 		** track of which is used.
887 		*/
888 		scctx->isc_msix_bar = pci_msix_table_bar(dev);
889 	} else if (hw->mac.type >= em_mac_min) {
890 		scctx->isc_txqsizes[0] = roundup2(scctx->isc_ntxd[0]* sizeof(struct e1000_tx_desc), EM_DBA_ALIGN);
891 		scctx->isc_rxqsizes[0] = roundup2(scctx->isc_nrxd[0] * sizeof(union e1000_rx_desc_extended), EM_DBA_ALIGN);
892 		scctx->isc_txd_size[0] = sizeof(struct e1000_tx_desc);
893 		scctx->isc_rxd_size[0] = sizeof(union e1000_rx_desc_extended);
894 		scctx->isc_txrx = &em_txrx;
895 		scctx->isc_tx_tso_segments_max = EM_MAX_SCATTER;
896 		scctx->isc_tx_tso_size_max = EM_TSO_SIZE;
897 		scctx->isc_tx_tso_segsize_max = EM_TSO_SEG_SIZE;
898 		scctx->isc_capabilities = scctx->isc_capenable = EM_CAPS;
899 		/*
900 		 * For EM-class devices, don't enable IFCAP_{TSO4,VLAN_HWTSO}
901 		 * by default as we don't have workarounds for all associated
902 		 * silicon errata.  E. g., with several MACs such as 82573E,
903 		 * TSO only works at Gigabit speed and otherwise can cause the
904 		 * hardware to hang (which also would be next to impossible to
905 		 * work around given that already queued TSO-using descriptors
906 		 * would need to be flushed and vlan(4) reconfigured at runtime
907 		 * in case of a link speed change).  Moreover, MACs like 82579
908 		 * still can hang at Gigabit even with all publicly documented
909 		 * TSO workarounds implemented.  Generally, the penality of
910 		 * these workarounds is rather high and may involve copying
911 		 * mbuf data around so advantages of TSO lapse.  Still, TSO may
912 		 * work for a few MACs of this class - at least when sticking
913 		 * with Gigabit - in which case users may enable TSO manually.
914 		 */
915 		scctx->isc_capenable &= ~(IFCAP_TSO4 | IFCAP_VLAN_HWTSO);
916 		scctx->isc_tx_csum_flags = CSUM_TCP | CSUM_UDP | CSUM_IP_TSO;
917 		/*
918 		 * We support MSI-X with 82574 only, but indicate to iflib(4)
919 		 * that it shall give MSI at least a try with other devices.
920 		 */
921 		if (hw->mac.type == e1000_82574) {
922 			scctx->isc_msix_bar = pci_msix_table_bar(dev);
923 		} else {
924 			scctx->isc_msix_bar = -1;
925 			scctx->isc_disable_msix = 1;
926 		}
927 	} else {
928 		scctx->isc_txqsizes[0] = roundup2((scctx->isc_ntxd[0] + 1) * sizeof(struct e1000_tx_desc), EM_DBA_ALIGN);
929 		scctx->isc_rxqsizes[0] = roundup2((scctx->isc_nrxd[0] + 1) * sizeof(struct e1000_rx_desc), EM_DBA_ALIGN);
930 		scctx->isc_txd_size[0] = sizeof(struct e1000_tx_desc);
931 		scctx->isc_rxd_size[0] = sizeof(struct e1000_rx_desc);
932 		scctx->isc_tx_csum_flags = CSUM_TCP | CSUM_UDP;
933 		scctx->isc_txrx = &lem_txrx;
934 		scctx->isc_capabilities = LEM_CAPS;
935 		if (hw->mac.type < e1000_82543)
936 			scctx->isc_capabilities &= ~(IFCAP_HWCSUM|IFCAP_VLAN_HWCSUM);
937 		/* 82541ER doesn't do HW tagging */
938 		if (hw->device_id == E1000_DEV_ID_82541ER || hw->device_id == E1000_DEV_ID_82541ER_LOM)
939 			scctx->isc_capabilities &= ~IFCAP_VLAN_HWTAGGING;
940 		/* INTx only */
941 		scctx->isc_msix_bar = 0;
942 		scctx->isc_capenable = scctx->isc_capabilities;
943 	}
944 
945 	/* Setup PCI resources */
946 	if (em_allocate_pci_resources(ctx)) {
947 		device_printf(dev, "Allocation of PCI resources failed\n");
948 		error = ENXIO;
949 		goto err_pci;
950 	}
951 
952 	/*
953 	** For ICH8 and family we need to
954 	** map the flash memory, and this
955 	** must happen after the MAC is
956 	** identified
957 	*/
958 	if ((hw->mac.type == e1000_ich8lan) ||
959 	    (hw->mac.type == e1000_ich9lan) ||
960 	    (hw->mac.type == e1000_ich10lan) ||
961 	    (hw->mac.type == e1000_pchlan) ||
962 	    (hw->mac.type == e1000_pch2lan) ||
963 	    (hw->mac.type == e1000_pch_lpt)) {
964 		int rid = EM_BAR_TYPE_FLASH;
965 		sc->flash = bus_alloc_resource_any(dev,
966 		    SYS_RES_MEMORY, &rid, RF_ACTIVE);
967 		if (sc->flash == NULL) {
968 			device_printf(dev, "Mapping of Flash failed\n");
969 			error = ENXIO;
970 			goto err_pci;
971 		}
972 		/* This is used in the shared code */
973 		hw->flash_address = (u8 *)sc->flash;
974 		sc->osdep.flash_bus_space_tag =
975 		    rman_get_bustag(sc->flash);
976 		sc->osdep.flash_bus_space_handle =
977 		    rman_get_bushandle(sc->flash);
978 	}
979 	/*
980 	** In the new SPT device flash is not  a
981 	** separate BAR, rather it is also in BAR0,
982 	** so use the same tag and an offset handle for the
983 	** FLASH read/write macros in the shared code.
984 	*/
985 	else if (hw->mac.type >= e1000_pch_spt) {
986 		sc->osdep.flash_bus_space_tag =
987 		    sc->osdep.mem_bus_space_tag;
988 		sc->osdep.flash_bus_space_handle =
989 		    sc->osdep.mem_bus_space_handle
990 		    + E1000_FLASH_BASE_ADDR;
991 	}
992 
993 	/* Do Shared Code initialization */
994 	error = e1000_setup_init_funcs(hw, true);
995 	if (error) {
996 		device_printf(dev, "Setup of Shared code failed, error %d\n",
997 		    error);
998 		error = ENXIO;
999 		goto err_pci;
1000 	}
1001 
1002 	em_setup_msix(ctx);
1003 	e1000_get_bus_info(hw);
1004 
1005 	/* Set up some sysctls for the tunable interrupt delays */
1006 	em_add_int_delay_sysctl(sc, "rx_int_delay",
1007 	    "receive interrupt delay in usecs", &sc->rx_int_delay,
1008 	    E1000_REGISTER(hw, E1000_RDTR), em_rx_int_delay_dflt);
1009 	em_add_int_delay_sysctl(sc, "tx_int_delay",
1010 	    "transmit interrupt delay in usecs", &sc->tx_int_delay,
1011 	    E1000_REGISTER(hw, E1000_TIDV), em_tx_int_delay_dflt);
1012 	em_add_int_delay_sysctl(sc, "rx_abs_int_delay",
1013 	    "receive interrupt delay limit in usecs",
1014 	    &sc->rx_abs_int_delay,
1015 	    E1000_REGISTER(hw, E1000_RADV),
1016 	    em_rx_abs_int_delay_dflt);
1017 	em_add_int_delay_sysctl(sc, "tx_abs_int_delay",
1018 	    "transmit interrupt delay limit in usecs",
1019 	    &sc->tx_abs_int_delay,
1020 	    E1000_REGISTER(hw, E1000_TADV),
1021 	    em_tx_abs_int_delay_dflt);
1022 	em_add_int_delay_sysctl(sc, "itr",
1023 	    "interrupt delay limit in usecs/4",
1024 	    &sc->tx_itr,
1025 	    E1000_REGISTER(hw, E1000_ITR),
1026 	    DEFAULT_ITR);
1027 
1028 	hw->mac.autoneg = DO_AUTO_NEG;
1029 	hw->phy.autoneg_wait_to_complete = false;
1030 	hw->phy.autoneg_advertised = AUTONEG_ADV_DEFAULT;
1031 
1032 	if (hw->mac.type < em_mac_min) {
1033 		e1000_init_script_state_82541(hw, true);
1034 		e1000_set_tbi_compatibility_82543(hw, true);
1035 	}
1036 	/* Copper options */
1037 	if (hw->phy.media_type == e1000_media_type_copper) {
1038 		hw->phy.mdix = AUTO_ALL_MODES;
1039 		hw->phy.disable_polarity_correction = false;
1040 		hw->phy.ms_type = EM_MASTER_SLAVE;
1041 	}
1042 
1043 	/*
1044 	 * Set the frame limits assuming
1045 	 * standard ethernet sized frames.
1046 	 */
1047 	scctx->isc_max_frame_size = hw->mac.max_frame_size =
1048 	    ETHERMTU + ETHER_HDR_LEN + ETHERNET_FCS_SIZE;
1049 
1050 	/*
1051 	 * This controls when hardware reports transmit completion
1052 	 * status.
1053 	 */
1054 	hw->mac.report_tx_early = 1;
1055 
1056 	/* Allocate multicast array memory. */
1057 	sc->mta = malloc(sizeof(u8) * ETHER_ADDR_LEN *
1058 	    MAX_NUM_MULTICAST_ADDRESSES, M_DEVBUF, M_NOWAIT);
1059 	if (sc->mta == NULL) {
1060 		device_printf(dev, "Can not allocate multicast setup array\n");
1061 		error = ENOMEM;
1062 		goto err_late;
1063 	}
1064 
1065 	/* Check SOL/IDER usage */
1066 	if (e1000_check_reset_block(hw))
1067 		device_printf(dev, "PHY reset is blocked"
1068 			      " due to SOL/IDER session.\n");
1069 
1070 	/* Sysctl for setting Energy Efficient Ethernet */
1071 	hw->dev_spec.ich8lan.eee_disable = eee_setting;
1072 	SYSCTL_ADD_PROC(ctx_list, child, OID_AUTO, "eee_control",
1073 	    CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_NEEDGIANT, sc, 0,
1074 	    em_sysctl_eee, "I", "Disable Energy Efficient Ethernet");
1075 
1076 	/*
1077 	** Start from a known state, this is
1078 	** important in reading the nvm and
1079 	** mac from that.
1080 	*/
1081 	e1000_reset_hw(hw);
1082 
1083 	/* Make sure we have a good EEPROM before we read from it */
1084 	if (e1000_validate_nvm_checksum(hw) < 0) {
1085 		/*
1086 		** Some PCI-E parts fail the first check due to
1087 		** the link being in sleep state, call it again,
1088 		** if it fails a second time its a real issue.
1089 		*/
1090 		if (e1000_validate_nvm_checksum(hw) < 0) {
1091 			device_printf(dev,
1092 			    "The EEPROM Checksum Is Not Valid\n");
1093 			error = EIO;
1094 			goto err_late;
1095 		}
1096 	}
1097 
1098 	/* Copy the permanent MAC address out of the EEPROM */
1099 	if (e1000_read_mac_addr(hw) < 0) {
1100 		device_printf(dev, "EEPROM read error while reading MAC"
1101 			      " address\n");
1102 		error = EIO;
1103 		goto err_late;
1104 	}
1105 
1106 	if (!em_is_valid_ether_addr(hw->mac.addr)) {
1107 		if (sc->vf_ifp) {
1108 			ether_gen_addr(iflib_get_ifp(ctx),
1109 			    (struct ether_addr *)hw->mac.addr);
1110 		} else {
1111 			device_printf(dev, "Invalid MAC address\n");
1112 			error = EIO;
1113 			goto err_late;
1114 		}
1115 	}
1116 
1117 	/* Save the EEPROM/NVM versions, must be done under IFLIB_CTX_LOCK */
1118 	em_fw_version_locked(ctx);
1119 
1120 	em_print_fw_version(sc);
1121 
1122 	/*
1123 	 * Get Wake-on-Lan and Management info for later use
1124 	 */
1125 	em_get_wakeup(ctx);
1126 
1127 	/* Enable only WOL MAGIC by default */
1128 	scctx->isc_capenable &= ~IFCAP_WOL;
1129 	if (sc->wol != 0)
1130 		scctx->isc_capenable |= IFCAP_WOL_MAGIC;
1131 
1132 	iflib_set_mac(ctx, hw->mac.addr);
1133 
1134 	return (0);
1135 
1136 err_late:
1137 	em_release_hw_control(sc);
1138 err_pci:
1139 	em_free_pci_resources(ctx);
1140 	free(sc->mta, M_DEVBUF);
1141 
1142 	return (error);
1143 }
1144 
1145 static int
1146 em_if_attach_post(if_ctx_t ctx)
1147 {
1148 	struct e1000_softc *sc = iflib_get_softc(ctx);
1149 	struct e1000_hw *hw = &sc->hw;
1150 	int error = 0;
1151 
1152 	/* Setup OS specific network interface */
1153 	error = em_setup_interface(ctx);
1154 	if (error != 0) {
1155 		device_printf(sc->dev, "Interface setup failed: %d\n", error);
1156 		goto err_late;
1157 	}
1158 
1159 	em_reset(ctx);
1160 
1161 	/* Initialize statistics */
1162 	em_update_stats_counters(sc);
1163 	hw->mac.get_link_status = 1;
1164 	em_if_update_admin_status(ctx);
1165 	em_add_hw_stats(sc);
1166 
1167 	/* Non-AMT based hardware can now take control from firmware */
1168 	if (sc->has_manage && !sc->has_amt)
1169 		em_get_hw_control(sc);
1170 
1171 	INIT_DEBUGOUT("em_if_attach_post: end");
1172 
1173 	return (0);
1174 
1175 err_late:
1176 	/* upon attach_post() error, iflib calls _if_detach() to free resources. */
1177 	return (error);
1178 }
1179 
1180 /*********************************************************************
1181  *  Device removal routine
1182  *
1183  *  The detach entry point is called when the driver is being removed.
1184  *  This routine stops the adapter and deallocates all the resources
1185  *  that were allocated for driver operation.
1186  *
1187  *  return 0 on success, positive on failure
1188  *********************************************************************/
1189 static int
1190 em_if_detach(if_ctx_t ctx)
1191 {
1192 	struct e1000_softc	*sc = iflib_get_softc(ctx);
1193 
1194 	INIT_DEBUGOUT("em_if_detach: begin");
1195 
1196 	e1000_phy_hw_reset(&sc->hw);
1197 
1198 	em_release_manageability(sc);
1199 	em_release_hw_control(sc);
1200 	em_free_pci_resources(ctx);
1201 	free(sc->mta, M_DEVBUF);
1202 	sc->mta = NULL;
1203 
1204 	return (0);
1205 }
1206 
1207 /*********************************************************************
1208  *
1209  *  Shutdown entry point
1210  *
1211  **********************************************************************/
1212 
1213 static int
1214 em_if_shutdown(if_ctx_t ctx)
1215 {
1216 	return em_if_suspend(ctx);
1217 }
1218 
1219 /*
1220  * Suspend/resume device methods.
1221  */
1222 static int
1223 em_if_suspend(if_ctx_t ctx)
1224 {
1225 	struct e1000_softc *sc = iflib_get_softc(ctx);
1226 
1227 	em_release_manageability(sc);
1228 	em_release_hw_control(sc);
1229 	em_enable_wakeup(ctx);
1230 	return (0);
1231 }
1232 
1233 static int
1234 em_if_resume(if_ctx_t ctx)
1235 {
1236 	struct e1000_softc *sc = iflib_get_softc(ctx);
1237 
1238 	if (sc->hw.mac.type == e1000_pch2lan)
1239 		e1000_resume_workarounds_pchlan(&sc->hw);
1240 	em_if_init(ctx);
1241 	em_init_manageability(sc);
1242 
1243 	return(0);
1244 }
1245 
1246 static int
1247 em_if_mtu_set(if_ctx_t ctx, uint32_t mtu)
1248 {
1249 	int max_frame_size;
1250 	struct e1000_softc *sc = iflib_get_softc(ctx);
1251 	if_softc_ctx_t scctx = iflib_get_softc_ctx(ctx);
1252 
1253 	IOCTL_DEBUGOUT("ioctl rcv'd: SIOCSIFMTU (Set Interface MTU)");
1254 
1255 	switch (sc->hw.mac.type) {
1256 	case e1000_82571:
1257 	case e1000_82572:
1258 	case e1000_ich9lan:
1259 	case e1000_ich10lan:
1260 	case e1000_pch2lan:
1261 	case e1000_pch_lpt:
1262 	case e1000_pch_spt:
1263 	case e1000_pch_cnp:
1264 	case e1000_pch_tgp:
1265 	case e1000_pch_adp:
1266 	case e1000_pch_mtp:
1267 	case e1000_pch_ptp:
1268 	case e1000_82574:
1269 	case e1000_82583:
1270 	case e1000_80003es2lan:
1271 		/* 9K Jumbo Frame size */
1272 		max_frame_size = 9234;
1273 		break;
1274 	case e1000_pchlan:
1275 		max_frame_size = 4096;
1276 		break;
1277 	case e1000_82542:
1278 	case e1000_ich8lan:
1279 		/* Adapters that do not support jumbo frames */
1280 		max_frame_size = ETHER_MAX_LEN;
1281 		break;
1282 	default:
1283 		if (sc->hw.mac.type >= igb_mac_min)
1284 			max_frame_size = 9234;
1285 		else /* lem */
1286 			max_frame_size = MAX_JUMBO_FRAME_SIZE;
1287 	}
1288 	if (mtu > max_frame_size - ETHER_HDR_LEN - ETHER_CRC_LEN) {
1289 		return (EINVAL);
1290 	}
1291 
1292 	scctx->isc_max_frame_size = sc->hw.mac.max_frame_size =
1293 	    mtu + ETHER_HDR_LEN + ETHER_CRC_LEN;
1294 	return (0);
1295 }
1296 
1297 /*********************************************************************
1298  *  Init entry point
1299  *
1300  *  This routine is used in two ways. It is used by the stack as
1301  *  init entry point in network interface structure. It is also used
1302  *  by the driver as a hw/sw initialization routine to get to a
1303  *  consistent state.
1304  *
1305  **********************************************************************/
1306 static void
1307 em_if_init(if_ctx_t ctx)
1308 {
1309 	struct e1000_softc *sc = iflib_get_softc(ctx);
1310 	if_softc_ctx_t scctx = sc->shared;
1311 	if_t ifp = iflib_get_ifp(ctx);
1312 	struct em_tx_queue *tx_que;
1313 	int i;
1314 
1315 	INIT_DEBUGOUT("em_if_init: begin");
1316 
1317 	/* Get the latest mac address, User can use a LAA */
1318 	bcopy(if_getlladdr(ifp), sc->hw.mac.addr,
1319 	    ETHER_ADDR_LEN);
1320 
1321 	/* Put the address into the Receive Address Array */
1322 	e1000_rar_set(&sc->hw, sc->hw.mac.addr, 0);
1323 
1324 	/*
1325 	 * With the 82571 adapter, RAR[0] may be overwritten
1326 	 * when the other port is reset, we make a duplicate
1327 	 * in RAR[14] for that eventuality, this assures
1328 	 * the interface continues to function.
1329 	 */
1330 	if (sc->hw.mac.type == e1000_82571) {
1331 		e1000_set_laa_state_82571(&sc->hw, true);
1332 		e1000_rar_set(&sc->hw, sc->hw.mac.addr,
1333 		    E1000_RAR_ENTRIES - 1);
1334 	}
1335 
1336 
1337 	/* Initialize the hardware */
1338 	em_reset(ctx);
1339 	em_if_update_admin_status(ctx);
1340 
1341 	for (i = 0, tx_que = sc->tx_queues; i < sc->tx_num_queues; i++, tx_que++) {
1342 		struct tx_ring *txr = &tx_que->txr;
1343 
1344 		txr->tx_rs_cidx = txr->tx_rs_pidx;
1345 
1346 		/* Initialize the last processed descriptor to be the end of
1347 		 * the ring, rather than the start, so that we avoid an
1348 		 * off-by-one error when calculating how many descriptors are
1349 		 * done in the credits_update function.
1350 		 */
1351 		txr->tx_cidx_processed = scctx->isc_ntxd[0] - 1;
1352 	}
1353 
1354 	/* Setup VLAN support, basic and offload if available */
1355 	E1000_WRITE_REG(&sc->hw, E1000_VET, ETHERTYPE_VLAN);
1356 
1357 	/* Clear bad data from Rx FIFOs */
1358 	if (sc->hw.mac.type >= igb_mac_min)
1359 		e1000_rx_fifo_flush_base(&sc->hw);
1360 
1361 	/* Configure for OS presence */
1362 	em_init_manageability(sc);
1363 
1364 	/* Prepare transmit descriptors and buffers */
1365 	em_initialize_transmit_unit(ctx);
1366 
1367 	/* Setup Multicast table */
1368 	em_if_multi_set(ctx);
1369 
1370 	sc->rx_mbuf_sz = iflib_get_rx_mbuf_sz(ctx);
1371 	em_initialize_receive_unit(ctx);
1372 
1373 	/* Set up VLAN support and filter */
1374 	em_setup_vlan_hw_support(ctx);
1375 
1376 	/* Don't lose promiscuous settings */
1377 	em_if_set_promisc(ctx, if_getflags(ifp));
1378 	e1000_clear_hw_cntrs_base_generic(&sc->hw);
1379 
1380 	/* MSI-X configuration for 82574 */
1381 	if (sc->hw.mac.type == e1000_82574) {
1382 		int tmp = E1000_READ_REG(&sc->hw, E1000_CTRL_EXT);
1383 
1384 		tmp |= E1000_CTRL_EXT_PBA_CLR;
1385 		E1000_WRITE_REG(&sc->hw, E1000_CTRL_EXT, tmp);
1386 		/* Set the IVAR - interrupt vector routing. */
1387 		E1000_WRITE_REG(&sc->hw, E1000_IVAR, sc->ivars);
1388 	} else if (sc->intr_type == IFLIB_INTR_MSIX) /* Set up queue routing */
1389 		igb_configure_queues(sc);
1390 
1391 	/* this clears any pending interrupts */
1392 	E1000_READ_REG(&sc->hw, E1000_ICR);
1393 	E1000_WRITE_REG(&sc->hw, E1000_ICS, E1000_ICS_LSC);
1394 
1395 	/* AMT based hardware can now take control from firmware */
1396 	if (sc->has_manage && sc->has_amt)
1397 		em_get_hw_control(sc);
1398 
1399 	/* Set Energy Efficient Ethernet */
1400 	if (sc->hw.mac.type >= igb_mac_min &&
1401 	    sc->hw.phy.media_type == e1000_media_type_copper) {
1402 		if (sc->hw.mac.type == e1000_i354)
1403 			e1000_set_eee_i354(&sc->hw, true, true);
1404 		else
1405 			e1000_set_eee_i350(&sc->hw, true, true);
1406 	}
1407 }
1408 
1409 /*********************************************************************
1410  *
1411  *  Fast Legacy/MSI Combined Interrupt Service routine
1412  *
1413  *********************************************************************/
1414 int
1415 em_intr(void *arg)
1416 {
1417 	struct e1000_softc *sc = arg;
1418 	if_ctx_t ctx = sc->ctx;
1419 	u32 reg_icr;
1420 
1421 	reg_icr = E1000_READ_REG(&sc->hw, E1000_ICR);
1422 
1423 	/* Hot eject? */
1424 	if (reg_icr == 0xffffffff)
1425 		return FILTER_STRAY;
1426 
1427 	/* Definitely not our interrupt. */
1428 	if (reg_icr == 0x0)
1429 		return FILTER_STRAY;
1430 
1431 	/*
1432 	 * Starting with the 82571 chip, bit 31 should be used to
1433 	 * determine whether the interrupt belongs to us.
1434 	 */
1435 	if (sc->hw.mac.type >= e1000_82571 &&
1436 	    (reg_icr & E1000_ICR_INT_ASSERTED) == 0)
1437 		return FILTER_STRAY;
1438 
1439 	/*
1440 	 * Only MSI-X interrupts have one-shot behavior by taking advantage
1441 	 * of the EIAC register.  Thus, explicitly disable interrupts.  This
1442 	 * also works around the MSI message reordering errata on certain
1443 	 * systems.
1444 	 */
1445 	IFDI_INTR_DISABLE(ctx);
1446 
1447 	/* Link status change */
1448 	if (reg_icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))
1449 		em_handle_link(ctx);
1450 
1451 	if (reg_icr & E1000_ICR_RXO)
1452 		sc->rx_overruns++;
1453 
1454 	return (FILTER_SCHEDULE_THREAD);
1455 }
1456 
1457 static int
1458 em_if_rx_queue_intr_enable(if_ctx_t ctx, uint16_t rxqid)
1459 {
1460 	struct e1000_softc *sc = iflib_get_softc(ctx);
1461 	struct em_rx_queue *rxq = &sc->rx_queues[rxqid];
1462 
1463 	E1000_WRITE_REG(&sc->hw, E1000_IMS, rxq->eims);
1464 	return (0);
1465 }
1466 
1467 static int
1468 em_if_tx_queue_intr_enable(if_ctx_t ctx, uint16_t txqid)
1469 {
1470 	struct e1000_softc *sc = iflib_get_softc(ctx);
1471 	struct em_tx_queue *txq = &sc->tx_queues[txqid];
1472 
1473 	E1000_WRITE_REG(&sc->hw, E1000_IMS, txq->eims);
1474 	return (0);
1475 }
1476 
1477 static int
1478 igb_if_rx_queue_intr_enable(if_ctx_t ctx, uint16_t rxqid)
1479 {
1480 	struct e1000_softc *sc = iflib_get_softc(ctx);
1481 	struct em_rx_queue *rxq = &sc->rx_queues[rxqid];
1482 
1483 	E1000_WRITE_REG(&sc->hw, E1000_EIMS, rxq->eims);
1484 	return (0);
1485 }
1486 
1487 static int
1488 igb_if_tx_queue_intr_enable(if_ctx_t ctx, uint16_t txqid)
1489 {
1490 	struct e1000_softc *sc = iflib_get_softc(ctx);
1491 	struct em_tx_queue *txq = &sc->tx_queues[txqid];
1492 
1493 	E1000_WRITE_REG(&sc->hw, E1000_EIMS, txq->eims);
1494 	return (0);
1495 }
1496 
1497 /*********************************************************************
1498  *
1499  *  MSI-X RX Interrupt Service routine
1500  *
1501  **********************************************************************/
1502 static int
1503 em_msix_que(void *arg)
1504 {
1505 	struct em_rx_queue *que = arg;
1506 
1507 	++que->irqs;
1508 
1509 	return (FILTER_SCHEDULE_THREAD);
1510 }
1511 
1512 /*********************************************************************
1513  *
1514  *  MSI-X Link Fast Interrupt Service routine
1515  *
1516  **********************************************************************/
1517 static int
1518 em_msix_link(void *arg)
1519 {
1520 	struct e1000_softc *sc = arg;
1521 	u32 reg_icr;
1522 
1523 	++sc->link_irq;
1524 	MPASS(sc->hw.back != NULL);
1525 	reg_icr = E1000_READ_REG(&sc->hw, E1000_ICR);
1526 
1527 	if (reg_icr & E1000_ICR_RXO)
1528 		sc->rx_overruns++;
1529 
1530 	if (reg_icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))
1531 		em_handle_link(sc->ctx);
1532 
1533 	/* Re-arm unconditionally */
1534 	if (sc->hw.mac.type >= igb_mac_min) {
1535 		E1000_WRITE_REG(&sc->hw, E1000_IMS, E1000_IMS_LSC);
1536 		E1000_WRITE_REG(&sc->hw, E1000_EIMS, sc->link_mask);
1537 	} else if (sc->hw.mac.type == e1000_82574) {
1538 		E1000_WRITE_REG(&sc->hw, E1000_IMS, E1000_IMS_LSC |
1539 		    E1000_IMS_OTHER);
1540 		/*
1541 		 * Because we must read the ICR for this interrupt it may
1542 		 * clear other causes using autoclear, for this reason we
1543 		 * simply create a soft interrupt for all these vectors.
1544 		 */
1545 		if (reg_icr)
1546 			E1000_WRITE_REG(&sc->hw, E1000_ICS, sc->ims);
1547 	} else
1548 		E1000_WRITE_REG(&sc->hw, E1000_IMS, E1000_IMS_LSC);
1549 
1550 	return (FILTER_HANDLED);
1551 }
1552 
1553 static void
1554 em_handle_link(void *context)
1555 {
1556 	if_ctx_t ctx = context;
1557 	struct e1000_softc *sc = iflib_get_softc(ctx);
1558 
1559 	sc->hw.mac.get_link_status = 1;
1560 	iflib_admin_intr_deferred(ctx);
1561 }
1562 
1563 /*********************************************************************
1564  *
1565  *  Media Ioctl callback
1566  *
1567  *  This routine is called whenever the user queries the status of
1568  *  the interface using ifconfig.
1569  *
1570  **********************************************************************/
1571 static void
1572 em_if_media_status(if_ctx_t ctx, struct ifmediareq *ifmr)
1573 {
1574 	struct e1000_softc *sc = iflib_get_softc(ctx);
1575 	u_char fiber_type = IFM_1000_SX;
1576 
1577 	INIT_DEBUGOUT("em_if_media_status: begin");
1578 
1579 	iflib_admin_intr_deferred(ctx);
1580 
1581 	ifmr->ifm_status = IFM_AVALID;
1582 	ifmr->ifm_active = IFM_ETHER;
1583 
1584 	if (!sc->link_active) {
1585 		return;
1586 	}
1587 
1588 	ifmr->ifm_status |= IFM_ACTIVE;
1589 
1590 	if ((sc->hw.phy.media_type == e1000_media_type_fiber) ||
1591 	    (sc->hw.phy.media_type == e1000_media_type_internal_serdes)) {
1592 		if (sc->hw.mac.type == e1000_82545)
1593 			fiber_type = IFM_1000_LX;
1594 		ifmr->ifm_active |= fiber_type | IFM_FDX;
1595 	} else {
1596 		switch (sc->link_speed) {
1597 		case 10:
1598 			ifmr->ifm_active |= IFM_10_T;
1599 			break;
1600 		case 100:
1601 			ifmr->ifm_active |= IFM_100_TX;
1602 			break;
1603 		case 1000:
1604 			ifmr->ifm_active |= IFM_1000_T;
1605 			break;
1606 		}
1607 		if (sc->link_duplex == FULL_DUPLEX)
1608 			ifmr->ifm_active |= IFM_FDX;
1609 		else
1610 			ifmr->ifm_active |= IFM_HDX;
1611 	}
1612 }
1613 
1614 /*********************************************************************
1615  *
1616  *  Media Ioctl callback
1617  *
1618  *  This routine is called when the user changes speed/duplex using
1619  *  media/mediopt option with ifconfig.
1620  *
1621  **********************************************************************/
1622 static int
1623 em_if_media_change(if_ctx_t ctx)
1624 {
1625 	struct e1000_softc *sc = iflib_get_softc(ctx);
1626 	struct ifmedia *ifm = iflib_get_media(ctx);
1627 
1628 	INIT_DEBUGOUT("em_if_media_change: begin");
1629 
1630 	if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER)
1631 		return (EINVAL);
1632 
1633 	switch (IFM_SUBTYPE(ifm->ifm_media)) {
1634 	case IFM_AUTO:
1635 		sc->hw.mac.autoneg = DO_AUTO_NEG;
1636 		sc->hw.phy.autoneg_advertised = AUTONEG_ADV_DEFAULT;
1637 		break;
1638 	case IFM_1000_LX:
1639 	case IFM_1000_SX:
1640 	case IFM_1000_T:
1641 		sc->hw.mac.autoneg = DO_AUTO_NEG;
1642 		sc->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL;
1643 		break;
1644 	case IFM_100_TX:
1645 		sc->hw.mac.autoneg = false;
1646 		sc->hw.phy.autoneg_advertised = 0;
1647 		if ((ifm->ifm_media & IFM_GMASK) == IFM_FDX)
1648 			sc->hw.mac.forced_speed_duplex = ADVERTISE_100_FULL;
1649 		else
1650 			sc->hw.mac.forced_speed_duplex = ADVERTISE_100_HALF;
1651 		break;
1652 	case IFM_10_T:
1653 		sc->hw.mac.autoneg = false;
1654 		sc->hw.phy.autoneg_advertised = 0;
1655 		if ((ifm->ifm_media & IFM_GMASK) == IFM_FDX)
1656 			sc->hw.mac.forced_speed_duplex = ADVERTISE_10_FULL;
1657 		else
1658 			sc->hw.mac.forced_speed_duplex = ADVERTISE_10_HALF;
1659 		break;
1660 	default:
1661 		device_printf(sc->dev, "Unsupported media type\n");
1662 	}
1663 
1664 	em_if_init(ctx);
1665 
1666 	return (0);
1667 }
1668 
1669 static int
1670 em_if_set_promisc(if_ctx_t ctx, int flags)
1671 {
1672 	struct e1000_softc *sc = iflib_get_softc(ctx);
1673 	if_t ifp = iflib_get_ifp(ctx);
1674 	u32 reg_rctl;
1675 	int mcnt = 0;
1676 
1677 	reg_rctl = E1000_READ_REG(&sc->hw, E1000_RCTL);
1678 	reg_rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_UPE);
1679 	if (flags & IFF_ALLMULTI)
1680 		mcnt = MAX_NUM_MULTICAST_ADDRESSES;
1681 	else
1682 		mcnt = min(if_llmaddr_count(ifp), MAX_NUM_MULTICAST_ADDRESSES);
1683 
1684 	if (mcnt < MAX_NUM_MULTICAST_ADDRESSES)
1685 		reg_rctl &= (~E1000_RCTL_MPE);
1686 	E1000_WRITE_REG(&sc->hw, E1000_RCTL, reg_rctl);
1687 
1688 	if (flags & IFF_PROMISC) {
1689 		reg_rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
1690 		em_if_vlan_filter_disable(sc);
1691 		/* Turn this on if you want to see bad packets */
1692 		if (em_debug_sbp)
1693 			reg_rctl |= E1000_RCTL_SBP;
1694 		E1000_WRITE_REG(&sc->hw, E1000_RCTL, reg_rctl);
1695 	} else {
1696 		if (flags & IFF_ALLMULTI) {
1697 			reg_rctl |= E1000_RCTL_MPE;
1698 			reg_rctl &= ~E1000_RCTL_UPE;
1699 			E1000_WRITE_REG(&sc->hw, E1000_RCTL, reg_rctl);
1700 		}
1701 		if (em_if_vlan_filter_used(ctx))
1702 			em_if_vlan_filter_enable(sc);
1703 	}
1704 	return (0);
1705 }
1706 
1707 static u_int
1708 em_copy_maddr(void *arg, struct sockaddr_dl *sdl, u_int idx)
1709 {
1710 	u8 *mta = arg;
1711 
1712 	if (idx == MAX_NUM_MULTICAST_ADDRESSES)
1713 		return (0);
1714 
1715 	bcopy(LLADDR(sdl), &mta[idx * ETHER_ADDR_LEN], ETHER_ADDR_LEN);
1716 
1717 	return (1);
1718 }
1719 
1720 /*********************************************************************
1721  *  Multicast Update
1722  *
1723  *  This routine is called whenever multicast address list is updated.
1724  *
1725  **********************************************************************/
1726 static void
1727 em_if_multi_set(if_ctx_t ctx)
1728 {
1729 	struct e1000_softc *sc = iflib_get_softc(ctx);
1730 	if_t ifp = iflib_get_ifp(ctx);
1731 	u8  *mta; /* Multicast array memory */
1732 	u32 reg_rctl = 0;
1733 	int mcnt = 0;
1734 
1735 	IOCTL_DEBUGOUT("em_set_multi: begin");
1736 
1737 	mta = sc->mta;
1738 	bzero(mta, sizeof(u8) * ETHER_ADDR_LEN * MAX_NUM_MULTICAST_ADDRESSES);
1739 
1740 	if (sc->hw.mac.type == e1000_82542 &&
1741 	    sc->hw.revision_id == E1000_REVISION_2) {
1742 		reg_rctl = E1000_READ_REG(&sc->hw, E1000_RCTL);
1743 		if (sc->hw.bus.pci_cmd_word & CMD_MEM_WRT_INVALIDATE)
1744 			e1000_pci_clear_mwi(&sc->hw);
1745 		reg_rctl |= E1000_RCTL_RST;
1746 		E1000_WRITE_REG(&sc->hw, E1000_RCTL, reg_rctl);
1747 		msec_delay(5);
1748 	}
1749 
1750 	mcnt = if_foreach_llmaddr(ifp, em_copy_maddr, mta);
1751 
1752 	if (mcnt < MAX_NUM_MULTICAST_ADDRESSES)
1753 		e1000_update_mc_addr_list(&sc->hw, mta, mcnt);
1754 
1755 	reg_rctl = E1000_READ_REG(&sc->hw, E1000_RCTL);
1756 
1757 	if (if_getflags(ifp) & IFF_PROMISC)
1758 		reg_rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
1759 	else if (mcnt >= MAX_NUM_MULTICAST_ADDRESSES ||
1760 	    if_getflags(ifp) & IFF_ALLMULTI) {
1761 		reg_rctl |= E1000_RCTL_MPE;
1762 		reg_rctl &= ~E1000_RCTL_UPE;
1763 	} else
1764 		reg_rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
1765 
1766 	E1000_WRITE_REG(&sc->hw, E1000_RCTL, reg_rctl);
1767 
1768 	if (sc->hw.mac.type == e1000_82542 &&
1769 	    sc->hw.revision_id == E1000_REVISION_2) {
1770 		reg_rctl = E1000_READ_REG(&sc->hw, E1000_RCTL);
1771 		reg_rctl &= ~E1000_RCTL_RST;
1772 		E1000_WRITE_REG(&sc->hw, E1000_RCTL, reg_rctl);
1773 		msec_delay(5);
1774 		if (sc->hw.bus.pci_cmd_word & CMD_MEM_WRT_INVALIDATE)
1775 			e1000_pci_set_mwi(&sc->hw);
1776 	}
1777 }
1778 
1779 /*********************************************************************
1780  *  Timer routine
1781  *
1782  *  This routine schedules em_if_update_admin_status() to check for
1783  *  link status and to gather statistics as well as to perform some
1784  *  controller-specific hardware patting.
1785  *
1786  **********************************************************************/
1787 static void
1788 em_if_timer(if_ctx_t ctx, uint16_t qid)
1789 {
1790 
1791 	if (qid != 0)
1792 		return;
1793 
1794 	iflib_admin_intr_deferred(ctx);
1795 }
1796 
1797 static void
1798 em_if_update_admin_status(if_ctx_t ctx)
1799 {
1800 	struct e1000_softc *sc = iflib_get_softc(ctx);
1801 	struct e1000_hw *hw = &sc->hw;
1802 	device_t dev = iflib_get_dev(ctx);
1803 	u32 link_check, thstat, ctrl;
1804 
1805 	link_check = thstat = ctrl = 0;
1806 	/* Get the cached link value or read phy for real */
1807 	switch (hw->phy.media_type) {
1808 	case e1000_media_type_copper:
1809 		if (hw->mac.get_link_status) {
1810 			if (hw->mac.type == e1000_pch_spt)
1811 				msec_delay(50);
1812 			/* Do the work to read phy */
1813 			e1000_check_for_link(hw);
1814 			link_check = !hw->mac.get_link_status;
1815 			if (link_check) /* ESB2 fix */
1816 				e1000_cfg_on_link_up(hw);
1817 		} else {
1818 			link_check = true;
1819 		}
1820 		break;
1821 	case e1000_media_type_fiber:
1822 		e1000_check_for_link(hw);
1823 		link_check = (E1000_READ_REG(hw, E1000_STATUS) &
1824 			    E1000_STATUS_LU);
1825 		break;
1826 	case e1000_media_type_internal_serdes:
1827 		e1000_check_for_link(hw);
1828 		link_check = hw->mac.serdes_has_link;
1829 		break;
1830 	/* VF device is type_unknown */
1831 	case e1000_media_type_unknown:
1832 		e1000_check_for_link(hw);
1833 		link_check = !hw->mac.get_link_status;
1834 		/* FALLTHROUGH */
1835 	default:
1836 		break;
1837 	}
1838 
1839 	/* Check for thermal downshift or shutdown */
1840 	if (hw->mac.type == e1000_i350) {
1841 		thstat = E1000_READ_REG(hw, E1000_THSTAT);
1842 		ctrl = E1000_READ_REG(hw, E1000_CTRL_EXT);
1843 	}
1844 
1845 	/* Now check for a transition */
1846 	if (link_check && (sc->link_active == 0)) {
1847 		e1000_get_speed_and_duplex(hw, &sc->link_speed,
1848 		    &sc->link_duplex);
1849 		/* Check if we must disable SPEED_MODE bit on PCI-E */
1850 		if ((sc->link_speed != SPEED_1000) &&
1851 		    ((hw->mac.type == e1000_82571) ||
1852 		    (hw->mac.type == e1000_82572))) {
1853 			int tarc0;
1854 			tarc0 = E1000_READ_REG(hw, E1000_TARC(0));
1855 			tarc0 &= ~TARC_SPEED_MODE_BIT;
1856 			E1000_WRITE_REG(hw, E1000_TARC(0), tarc0);
1857 		}
1858 		if (bootverbose)
1859 			device_printf(dev, "Link is up %d Mbps %s\n",
1860 			    sc->link_speed,
1861 			    ((sc->link_duplex == FULL_DUPLEX) ?
1862 			    "Full Duplex" : "Half Duplex"));
1863 		sc->link_active = 1;
1864 		sc->smartspeed = 0;
1865 		if ((ctrl & E1000_CTRL_EXT_LINK_MODE_MASK) ==
1866 		    E1000_CTRL_EXT_LINK_MODE_GMII &&
1867 		    (thstat & E1000_THSTAT_LINK_THROTTLE))
1868 			device_printf(dev, "Link: thermal downshift\n");
1869 		/* Delay Link Up for Phy update */
1870 		if (((hw->mac.type == e1000_i210) ||
1871 		    (hw->mac.type == e1000_i211)) &&
1872 		    (hw->phy.id == I210_I_PHY_ID))
1873 			msec_delay(I210_LINK_DELAY);
1874 		/* Reset if the media type changed. */
1875 		if (hw->dev_spec._82575.media_changed &&
1876 		    hw->mac.type >= igb_mac_min) {
1877 			hw->dev_spec._82575.media_changed = false;
1878 			sc->flags |= IGB_MEDIA_RESET;
1879 			em_reset(ctx);
1880 		}
1881 		iflib_link_state_change(ctx, LINK_STATE_UP,
1882 		    IF_Mbps(sc->link_speed));
1883 	} else if (!link_check && (sc->link_active == 1)) {
1884 		sc->link_speed = 0;
1885 		sc->link_duplex = 0;
1886 		sc->link_active = 0;
1887 		iflib_link_state_change(ctx, LINK_STATE_DOWN, 0);
1888 	}
1889 	em_update_stats_counters(sc);
1890 
1891 	/* Reset LAA into RAR[0] on 82571 */
1892 	if (hw->mac.type == e1000_82571 && e1000_get_laa_state_82571(hw))
1893 		e1000_rar_set(hw, hw->mac.addr, 0);
1894 
1895 	if (hw->mac.type < em_mac_min)
1896 		lem_smartspeed(sc);
1897 }
1898 
1899 static void
1900 em_if_watchdog_reset(if_ctx_t ctx)
1901 {
1902 	struct e1000_softc *sc = iflib_get_softc(ctx);
1903 
1904 	/*
1905 	 * Just count the event; iflib(4) will already trigger a
1906 	 * sufficient reset of the controller.
1907 	 */
1908 	sc->watchdog_events++;
1909 }
1910 
1911 /*********************************************************************
1912  *
1913  *  This routine disables all traffic on the adapter by issuing a
1914  *  global reset on the MAC.
1915  *
1916  **********************************************************************/
1917 static void
1918 em_if_stop(if_ctx_t ctx)
1919 {
1920 	struct e1000_softc *sc = iflib_get_softc(ctx);
1921 
1922 	INIT_DEBUGOUT("em_if_stop: begin");
1923 
1924 	/* I219 needs special flushing to avoid hangs */
1925 	if (sc->hw.mac.type >= e1000_pch_spt && sc->hw.mac.type < igb_mac_min)
1926 		em_flush_desc_rings(sc);
1927 
1928 	e1000_reset_hw(&sc->hw);
1929 	if (sc->hw.mac.type >= e1000_82544)
1930 		E1000_WRITE_REG(&sc->hw, E1000_WUFC, 0);
1931 
1932 	e1000_led_off(&sc->hw);
1933 	e1000_cleanup_led(&sc->hw);
1934 }
1935 
1936 /*********************************************************************
1937  *
1938  *  Determine hardware revision.
1939  *
1940  **********************************************************************/
1941 static void
1942 em_identify_hardware(if_ctx_t ctx)
1943 {
1944 	device_t dev = iflib_get_dev(ctx);
1945 	struct e1000_softc *sc = iflib_get_softc(ctx);
1946 
1947 	/* Make sure our PCI config space has the necessary stuff set */
1948 	sc->hw.bus.pci_cmd_word = pci_read_config(dev, PCIR_COMMAND, 2);
1949 
1950 	/* Save off the information about this board */
1951 	sc->hw.vendor_id = pci_get_vendor(dev);
1952 	sc->hw.device_id = pci_get_device(dev);
1953 	sc->hw.revision_id = pci_read_config(dev, PCIR_REVID, 1);
1954 	sc->hw.subsystem_vendor_id =
1955 	    pci_read_config(dev, PCIR_SUBVEND_0, 2);
1956 	sc->hw.subsystem_device_id =
1957 	    pci_read_config(dev, PCIR_SUBDEV_0, 2);
1958 
1959 	/* Do Shared Code Init and Setup */
1960 	if (e1000_set_mac_type(&sc->hw)) {
1961 		device_printf(dev, "Setup init failure\n");
1962 		return;
1963 	}
1964 
1965 	/* Are we a VF device? */
1966 	if ((sc->hw.mac.type == e1000_vfadapt) ||
1967 	    (sc->hw.mac.type == e1000_vfadapt_i350))
1968 		sc->vf_ifp = 1;
1969 	else
1970 		sc->vf_ifp = 0;
1971 }
1972 
1973 static int
1974 em_allocate_pci_resources(if_ctx_t ctx)
1975 {
1976 	struct e1000_softc *sc = iflib_get_softc(ctx);
1977 	device_t dev = iflib_get_dev(ctx);
1978 	int rid, val;
1979 
1980 	rid = PCIR_BAR(0);
1981 	sc->memory = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
1982 	    &rid, RF_ACTIVE);
1983 	if (sc->memory == NULL) {
1984 		device_printf(dev, "Unable to allocate bus resource: memory\n");
1985 		return (ENXIO);
1986 	}
1987 	sc->osdep.mem_bus_space_tag = rman_get_bustag(sc->memory);
1988 	sc->osdep.mem_bus_space_handle =
1989 	    rman_get_bushandle(sc->memory);
1990 	sc->hw.hw_addr = (u8 *)&sc->osdep.mem_bus_space_handle;
1991 
1992 	/* Only older adapters use IO mapping */
1993 	if (sc->hw.mac.type < em_mac_min && sc->hw.mac.type > e1000_82543) {
1994 		/* Figure our where our IO BAR is ? */
1995 		for (rid = PCIR_BAR(0); rid < PCIR_CIS;) {
1996 			val = pci_read_config(dev, rid, 4);
1997 			if (EM_BAR_TYPE(val) == EM_BAR_TYPE_IO) {
1998 				break;
1999 			}
2000 			rid += 4;
2001 			/* check for 64bit BAR */
2002 			if (EM_BAR_MEM_TYPE(val) == EM_BAR_MEM_TYPE_64BIT)
2003 				rid += 4;
2004 		}
2005 		if (rid >= PCIR_CIS) {
2006 			device_printf(dev, "Unable to locate IO BAR\n");
2007 			return (ENXIO);
2008 		}
2009 		sc->ioport = bus_alloc_resource_any(dev, SYS_RES_IOPORT,
2010 		    &rid, RF_ACTIVE);
2011 		if (sc->ioport == NULL) {
2012 			device_printf(dev, "Unable to allocate bus resource: "
2013 			    "ioport\n");
2014 			return (ENXIO);
2015 		}
2016 		sc->hw.io_base = 0;
2017 		sc->osdep.io_bus_space_tag =
2018 		    rman_get_bustag(sc->ioport);
2019 		sc->osdep.io_bus_space_handle =
2020 		    rman_get_bushandle(sc->ioport);
2021 	}
2022 
2023 	sc->hw.back = &sc->osdep;
2024 
2025 	return (0);
2026 }
2027 
2028 /*********************************************************************
2029  *
2030  *  Set up the MSI-X Interrupt handlers
2031  *
2032  **********************************************************************/
2033 static int
2034 em_if_msix_intr_assign(if_ctx_t ctx, int msix)
2035 {
2036 	struct e1000_softc *sc = iflib_get_softc(ctx);
2037 	struct em_rx_queue *rx_que = sc->rx_queues;
2038 	struct em_tx_queue *tx_que = sc->tx_queues;
2039 	int error, rid, i, vector = 0, rx_vectors;
2040 	char buf[16];
2041 
2042 	/* First set up ring resources */
2043 	for (i = 0; i < sc->rx_num_queues; i++, rx_que++, vector++) {
2044 		rid = vector + 1;
2045 		snprintf(buf, sizeof(buf), "rxq%d", i);
2046 		error = iflib_irq_alloc_generic(ctx, &rx_que->que_irq, rid, IFLIB_INTR_RXTX, em_msix_que, rx_que, rx_que->me, buf);
2047 		if (error) {
2048 			device_printf(iflib_get_dev(ctx), "Failed to allocate que int %d err: %d", i, error);
2049 			sc->rx_num_queues = i + 1;
2050 			goto fail;
2051 		}
2052 
2053 		rx_que->msix =  vector;
2054 
2055 		/*
2056 		 * Set the bit to enable interrupt
2057 		 * in E1000_IMS -- bits 20 and 21
2058 		 * are for RX0 and RX1, note this has
2059 		 * NOTHING to do with the MSI-X vector
2060 		 */
2061 		if (sc->hw.mac.type == e1000_82574) {
2062 			rx_que->eims = 1 << (20 + i);
2063 			sc->ims |= rx_que->eims;
2064 			sc->ivars |= (8 | rx_que->msix) << (i * 4);
2065 		} else if (sc->hw.mac.type == e1000_82575)
2066 			rx_que->eims = E1000_EICR_TX_QUEUE0 << vector;
2067 		else
2068 			rx_que->eims = 1 << vector;
2069 	}
2070 	rx_vectors = vector;
2071 
2072 	vector = 0;
2073 	for (i = 0; i < sc->tx_num_queues; i++, tx_que++, vector++) {
2074 		snprintf(buf, sizeof(buf), "txq%d", i);
2075 		tx_que = &sc->tx_queues[i];
2076 		iflib_softirq_alloc_generic(ctx,
2077 		    &sc->rx_queues[i % sc->rx_num_queues].que_irq,
2078 		    IFLIB_INTR_TX, tx_que, tx_que->me, buf);
2079 
2080 		tx_que->msix = (vector % sc->rx_num_queues);
2081 
2082 		/*
2083 		 * Set the bit to enable interrupt
2084 		 * in E1000_IMS -- bits 22 and 23
2085 		 * are for TX0 and TX1, note this has
2086 		 * NOTHING to do with the MSI-X vector
2087 		 */
2088 		if (sc->hw.mac.type == e1000_82574) {
2089 			tx_que->eims = 1 << (22 + i);
2090 			sc->ims |= tx_que->eims;
2091 			sc->ivars |= (8 | tx_que->msix) << (8 + (i * 4));
2092 		} else if (sc->hw.mac.type == e1000_82575) {
2093 			tx_que->eims = E1000_EICR_TX_QUEUE0 << i;
2094 		} else {
2095 			tx_que->eims = 1 << i;
2096 		}
2097 	}
2098 
2099 	/* Link interrupt */
2100 	rid = rx_vectors + 1;
2101 	error = iflib_irq_alloc_generic(ctx, &sc->irq, rid, IFLIB_INTR_ADMIN, em_msix_link, sc, 0, "aq");
2102 
2103 	if (error) {
2104 		device_printf(iflib_get_dev(ctx), "Failed to register admin handler");
2105 		goto fail;
2106 	}
2107 	sc->linkvec = rx_vectors;
2108 	if (sc->hw.mac.type < igb_mac_min) {
2109 		sc->ivars |=  (8 | rx_vectors) << 16;
2110 		sc->ivars |= 0x80000000;
2111 		/* Enable the "Other" interrupt type for link status change */
2112 		sc->ims |= E1000_IMS_OTHER;
2113 	}
2114 
2115 	return (0);
2116 fail:
2117 	iflib_irq_free(ctx, &sc->irq);
2118 	rx_que = sc->rx_queues;
2119 	for (int i = 0; i < sc->rx_num_queues; i++, rx_que++)
2120 		iflib_irq_free(ctx, &rx_que->que_irq);
2121 	return (error);
2122 }
2123 
2124 static void
2125 igb_configure_queues(struct e1000_softc *sc)
2126 {
2127 	struct e1000_hw *hw = &sc->hw;
2128 	struct em_rx_queue *rx_que;
2129 	struct em_tx_queue *tx_que;
2130 	u32 tmp, ivar = 0, newitr = 0;
2131 
2132 	/* First turn on RSS capability */
2133 	if (hw->mac.type != e1000_82575)
2134 		E1000_WRITE_REG(hw, E1000_GPIE,
2135 		    E1000_GPIE_MSIX_MODE | E1000_GPIE_EIAME |
2136 		    E1000_GPIE_PBA | E1000_GPIE_NSICR);
2137 
2138 	/* Turn on MSI-X */
2139 	switch (hw->mac.type) {
2140 	case e1000_82580:
2141 	case e1000_i350:
2142 	case e1000_i354:
2143 	case e1000_i210:
2144 	case e1000_i211:
2145 	case e1000_vfadapt:
2146 	case e1000_vfadapt_i350:
2147 		/* RX entries */
2148 		for (int i = 0; i < sc->rx_num_queues; i++) {
2149 			u32 index = i >> 1;
2150 			ivar = E1000_READ_REG_ARRAY(hw, E1000_IVAR0, index);
2151 			rx_que = &sc->rx_queues[i];
2152 			if (i & 1) {
2153 				ivar &= 0xFF00FFFF;
2154 				ivar |= (rx_que->msix | E1000_IVAR_VALID) << 16;
2155 			} else {
2156 				ivar &= 0xFFFFFF00;
2157 				ivar |= rx_que->msix | E1000_IVAR_VALID;
2158 			}
2159 			E1000_WRITE_REG_ARRAY(hw, E1000_IVAR0, index, ivar);
2160 		}
2161 		/* TX entries */
2162 		for (int i = 0; i < sc->tx_num_queues; i++) {
2163 			u32 index = i >> 1;
2164 			ivar = E1000_READ_REG_ARRAY(hw, E1000_IVAR0, index);
2165 			tx_que = &sc->tx_queues[i];
2166 			if (i & 1) {
2167 				ivar &= 0x00FFFFFF;
2168 				ivar |= (tx_que->msix | E1000_IVAR_VALID) << 24;
2169 			} else {
2170 				ivar &= 0xFFFF00FF;
2171 				ivar |= (tx_que->msix | E1000_IVAR_VALID) << 8;
2172 			}
2173 			E1000_WRITE_REG_ARRAY(hw, E1000_IVAR0, index, ivar);
2174 			sc->que_mask |= tx_que->eims;
2175 		}
2176 
2177 		/* And for the link interrupt */
2178 		ivar = (sc->linkvec | E1000_IVAR_VALID) << 8;
2179 		sc->link_mask = 1 << sc->linkvec;
2180 		E1000_WRITE_REG(hw, E1000_IVAR_MISC, ivar);
2181 		break;
2182 	case e1000_82576:
2183 		/* RX entries */
2184 		for (int i = 0; i < sc->rx_num_queues; i++) {
2185 			u32 index = i & 0x7; /* Each IVAR has two entries */
2186 			ivar = E1000_READ_REG_ARRAY(hw, E1000_IVAR0, index);
2187 			rx_que = &sc->rx_queues[i];
2188 			if (i < 8) {
2189 				ivar &= 0xFFFFFF00;
2190 				ivar |= rx_que->msix | E1000_IVAR_VALID;
2191 			} else {
2192 				ivar &= 0xFF00FFFF;
2193 				ivar |= (rx_que->msix | E1000_IVAR_VALID) << 16;
2194 			}
2195 			E1000_WRITE_REG_ARRAY(hw, E1000_IVAR0, index, ivar);
2196 			sc->que_mask |= rx_que->eims;
2197 		}
2198 		/* TX entries */
2199 		for (int i = 0; i < sc->tx_num_queues; i++) {
2200 			u32 index = i & 0x7; /* Each IVAR has two entries */
2201 			ivar = E1000_READ_REG_ARRAY(hw, E1000_IVAR0, index);
2202 			tx_que = &sc->tx_queues[i];
2203 			if (i < 8) {
2204 				ivar &= 0xFFFF00FF;
2205 				ivar |= (tx_que->msix | E1000_IVAR_VALID) << 8;
2206 			} else {
2207 				ivar &= 0x00FFFFFF;
2208 				ivar |= (tx_que->msix | E1000_IVAR_VALID) << 24;
2209 			}
2210 			E1000_WRITE_REG_ARRAY(hw, E1000_IVAR0, index, ivar);
2211 			sc->que_mask |= tx_que->eims;
2212 		}
2213 
2214 		/* And for the link interrupt */
2215 		ivar = (sc->linkvec | E1000_IVAR_VALID) << 8;
2216 		sc->link_mask = 1 << sc->linkvec;
2217 		E1000_WRITE_REG(hw, E1000_IVAR_MISC, ivar);
2218 		break;
2219 
2220 	case e1000_82575:
2221 		/* enable MSI-X support*/
2222 		tmp = E1000_READ_REG(hw, E1000_CTRL_EXT);
2223 		tmp |= E1000_CTRL_EXT_PBA_CLR;
2224 		/* Auto-Mask interrupts upon ICR read. */
2225 		tmp |= E1000_CTRL_EXT_EIAME;
2226 		tmp |= E1000_CTRL_EXT_IRCA;
2227 		E1000_WRITE_REG(hw, E1000_CTRL_EXT, tmp);
2228 
2229 		/* Queues */
2230 		for (int i = 0; i < sc->rx_num_queues; i++) {
2231 			rx_que = &sc->rx_queues[i];
2232 			tmp = E1000_EICR_RX_QUEUE0 << i;
2233 			tmp |= E1000_EICR_TX_QUEUE0 << i;
2234 			rx_que->eims = tmp;
2235 			E1000_WRITE_REG_ARRAY(hw, E1000_MSIXBM(0),
2236 			    i, rx_que->eims);
2237 			sc->que_mask |= rx_que->eims;
2238 		}
2239 
2240 		/* Link */
2241 		E1000_WRITE_REG(hw, E1000_MSIXBM(sc->linkvec),
2242 		    E1000_EIMS_OTHER);
2243 		sc->link_mask |= E1000_EIMS_OTHER;
2244 	default:
2245 		break;
2246 	}
2247 
2248 	/* Set the starting interrupt rate */
2249 	if (em_max_interrupt_rate > 0)
2250 		newitr = (4000000 / em_max_interrupt_rate) & 0x7FFC;
2251 
2252 	if (hw->mac.type == e1000_82575)
2253 		newitr |= newitr << 16;
2254 	else
2255 		newitr |= E1000_EITR_CNT_IGNR;
2256 
2257 	for (int i = 0; i < sc->rx_num_queues; i++) {
2258 		rx_que = &sc->rx_queues[i];
2259 		E1000_WRITE_REG(hw, E1000_EITR(rx_que->msix), newitr);
2260 	}
2261 
2262 	return;
2263 }
2264 
2265 static void
2266 em_free_pci_resources(if_ctx_t ctx)
2267 {
2268 	struct e1000_softc *sc = iflib_get_softc(ctx);
2269 	struct em_rx_queue *que = sc->rx_queues;
2270 	device_t dev = iflib_get_dev(ctx);
2271 
2272 	/* Release all MSI-X queue resources */
2273 	if (sc->intr_type == IFLIB_INTR_MSIX)
2274 		iflib_irq_free(ctx, &sc->irq);
2275 
2276 	if (que != NULL) {
2277 		for (int i = 0; i < sc->rx_num_queues; i++, que++) {
2278 			iflib_irq_free(ctx, &que->que_irq);
2279 		}
2280 	}
2281 
2282 	if (sc->memory != NULL) {
2283 		bus_release_resource(dev, SYS_RES_MEMORY,
2284 		    rman_get_rid(sc->memory), sc->memory);
2285 		sc->memory = NULL;
2286 	}
2287 
2288 	if (sc->flash != NULL) {
2289 		bus_release_resource(dev, SYS_RES_MEMORY,
2290 		    rman_get_rid(sc->flash), sc->flash);
2291 		sc->flash = NULL;
2292 	}
2293 
2294 	if (sc->ioport != NULL) {
2295 		bus_release_resource(dev, SYS_RES_IOPORT,
2296 		    rman_get_rid(sc->ioport), sc->ioport);
2297 		sc->ioport = NULL;
2298 	}
2299 }
2300 
2301 /* Set up MSI or MSI-X */
2302 static int
2303 em_setup_msix(if_ctx_t ctx)
2304 {
2305 	struct e1000_softc *sc = iflib_get_softc(ctx);
2306 
2307 	if (sc->hw.mac.type == e1000_82574) {
2308 		em_enable_vectors_82574(ctx);
2309 	}
2310 	return (0);
2311 }
2312 
2313 /*********************************************************************
2314  *
2315  *  Workaround for SmartSpeed on 82541 and 82547 controllers
2316  *
2317  **********************************************************************/
2318 static void
2319 lem_smartspeed(struct e1000_softc *sc)
2320 {
2321 	u16 phy_tmp;
2322 
2323 	if (sc->link_active || (sc->hw.phy.type != e1000_phy_igp) ||
2324 	    sc->hw.mac.autoneg == 0 ||
2325 	    (sc->hw.phy.autoneg_advertised & ADVERTISE_1000_FULL) == 0)
2326 		return;
2327 
2328 	if (sc->smartspeed == 0) {
2329 		/* If Master/Slave config fault is asserted twice,
2330 		 * we assume back-to-back */
2331 		e1000_read_phy_reg(&sc->hw, PHY_1000T_STATUS, &phy_tmp);
2332 		if (!(phy_tmp & SR_1000T_MS_CONFIG_FAULT))
2333 			return;
2334 		e1000_read_phy_reg(&sc->hw, PHY_1000T_STATUS, &phy_tmp);
2335 		if (phy_tmp & SR_1000T_MS_CONFIG_FAULT) {
2336 			e1000_read_phy_reg(&sc->hw,
2337 			    PHY_1000T_CTRL, &phy_tmp);
2338 			if(phy_tmp & CR_1000T_MS_ENABLE) {
2339 				phy_tmp &= ~CR_1000T_MS_ENABLE;
2340 				e1000_write_phy_reg(&sc->hw,
2341 				    PHY_1000T_CTRL, phy_tmp);
2342 				sc->smartspeed++;
2343 				if(sc->hw.mac.autoneg &&
2344 				   !e1000_copper_link_autoneg(&sc->hw) &&
2345 				   !e1000_read_phy_reg(&sc->hw,
2346 				    PHY_CONTROL, &phy_tmp)) {
2347 					phy_tmp |= (MII_CR_AUTO_NEG_EN |
2348 						    MII_CR_RESTART_AUTO_NEG);
2349 					e1000_write_phy_reg(&sc->hw,
2350 					    PHY_CONTROL, phy_tmp);
2351 				}
2352 			}
2353 		}
2354 		return;
2355 	} else if(sc->smartspeed == EM_SMARTSPEED_DOWNSHIFT) {
2356 		/* If still no link, perhaps using 2/3 pair cable */
2357 		e1000_read_phy_reg(&sc->hw, PHY_1000T_CTRL, &phy_tmp);
2358 		phy_tmp |= CR_1000T_MS_ENABLE;
2359 		e1000_write_phy_reg(&sc->hw, PHY_1000T_CTRL, phy_tmp);
2360 		if(sc->hw.mac.autoneg &&
2361 		   !e1000_copper_link_autoneg(&sc->hw) &&
2362 		   !e1000_read_phy_reg(&sc->hw, PHY_CONTROL, &phy_tmp)) {
2363 			phy_tmp |= (MII_CR_AUTO_NEG_EN |
2364 				    MII_CR_RESTART_AUTO_NEG);
2365 			e1000_write_phy_reg(&sc->hw, PHY_CONTROL, phy_tmp);
2366 		}
2367 	}
2368 	/* Restart process after EM_SMARTSPEED_MAX iterations */
2369 	if(sc->smartspeed++ == EM_SMARTSPEED_MAX)
2370 		sc->smartspeed = 0;
2371 }
2372 
2373 /*********************************************************************
2374  *
2375  *  Initialize the DMA Coalescing feature
2376  *
2377  **********************************************************************/
2378 static void
2379 igb_init_dmac(struct e1000_softc *sc, u32 pba)
2380 {
2381 	device_t	dev = sc->dev;
2382 	struct e1000_hw *hw = &sc->hw;
2383 	u32 		dmac, reg = ~E1000_DMACR_DMAC_EN;
2384 	u16		hwm;
2385 	u16		max_frame_size;
2386 
2387 	if (hw->mac.type == e1000_i211)
2388 		return;
2389 
2390 	max_frame_size = sc->shared->isc_max_frame_size;
2391 	if (hw->mac.type > e1000_82580) {
2392 
2393 		if (sc->dmac == 0) { /* Disabling it */
2394 			E1000_WRITE_REG(hw, E1000_DMACR, reg);
2395 			return;
2396 		} else
2397 			device_printf(dev, "DMA Coalescing enabled\n");
2398 
2399 		/* Set starting threshold */
2400 		E1000_WRITE_REG(hw, E1000_DMCTXTH, 0);
2401 
2402 		hwm = 64 * pba - max_frame_size / 16;
2403 		if (hwm < 64 * (pba - 6))
2404 			hwm = 64 * (pba - 6);
2405 		reg = E1000_READ_REG(hw, E1000_FCRTC);
2406 		reg &= ~E1000_FCRTC_RTH_COAL_MASK;
2407 		reg |= ((hwm << E1000_FCRTC_RTH_COAL_SHIFT)
2408 		    & E1000_FCRTC_RTH_COAL_MASK);
2409 		E1000_WRITE_REG(hw, E1000_FCRTC, reg);
2410 
2411 
2412 		dmac = pba - max_frame_size / 512;
2413 		if (dmac < pba - 10)
2414 			dmac = pba - 10;
2415 		reg = E1000_READ_REG(hw, E1000_DMACR);
2416 		reg &= ~E1000_DMACR_DMACTHR_MASK;
2417 		reg |= ((dmac << E1000_DMACR_DMACTHR_SHIFT)
2418 		    & E1000_DMACR_DMACTHR_MASK);
2419 
2420 		/* transition to L0x or L1 if available..*/
2421 		reg |= (E1000_DMACR_DMAC_EN | E1000_DMACR_DMAC_LX_MASK);
2422 
2423 		/* Check if status is 2.5Gb backplane connection
2424 		* before configuration of watchdog timer, which is
2425 		* in msec values in 12.8usec intervals
2426 		* watchdog timer= msec values in 32usec intervals
2427 		* for non 2.5Gb connection
2428 		*/
2429 		if (hw->mac.type == e1000_i354) {
2430 			int status = E1000_READ_REG(hw, E1000_STATUS);
2431 			if ((status & E1000_STATUS_2P5_SKU) &&
2432 			    (!(status & E1000_STATUS_2P5_SKU_OVER)))
2433 				reg |= ((sc->dmac * 5) >> 6);
2434 			else
2435 				reg |= (sc->dmac >> 5);
2436 		} else {
2437 			reg |= (sc->dmac >> 5);
2438 		}
2439 
2440 		E1000_WRITE_REG(hw, E1000_DMACR, reg);
2441 
2442 		E1000_WRITE_REG(hw, E1000_DMCRTRH, 0);
2443 
2444 		/* Set the interval before transition */
2445 		reg = E1000_READ_REG(hw, E1000_DMCTLX);
2446 		if (hw->mac.type == e1000_i350)
2447 			reg |= IGB_DMCTLX_DCFLUSH_DIS;
2448 		/*
2449 		** in 2.5Gb connection, TTLX unit is 0.4 usec
2450 		** which is 0x4*2 = 0xA. But delay is still 4 usec
2451 		*/
2452 		if (hw->mac.type == e1000_i354) {
2453 			int status = E1000_READ_REG(hw, E1000_STATUS);
2454 			if ((status & E1000_STATUS_2P5_SKU) &&
2455 			    (!(status & E1000_STATUS_2P5_SKU_OVER)))
2456 				reg |= 0xA;
2457 			else
2458 				reg |= 0x4;
2459 		} else {
2460 			reg |= 0x4;
2461 		}
2462 
2463 		E1000_WRITE_REG(hw, E1000_DMCTLX, reg);
2464 
2465 		/* free space in tx packet buffer to wake from DMA coal */
2466 		E1000_WRITE_REG(hw, E1000_DMCTXTH, (IGB_TXPBSIZE -
2467 		    (2 * max_frame_size)) >> 6);
2468 
2469 		/* make low power state decision controlled by DMA coal */
2470 		reg = E1000_READ_REG(hw, E1000_PCIEMISC);
2471 		reg &= ~E1000_PCIEMISC_LX_DECISION;
2472 		E1000_WRITE_REG(hw, E1000_PCIEMISC, reg);
2473 
2474 	} else if (hw->mac.type == e1000_82580) {
2475 		u32 reg = E1000_READ_REG(hw, E1000_PCIEMISC);
2476 		E1000_WRITE_REG(hw, E1000_PCIEMISC,
2477 		    reg & ~E1000_PCIEMISC_LX_DECISION);
2478 		E1000_WRITE_REG(hw, E1000_DMACR, 0);
2479 	}
2480 }
2481 /*********************************************************************
2482  * The 3 following flush routines are used as a workaround in the
2483  * I219 client parts and only for them.
2484  *
2485  * em_flush_tx_ring - remove all descriptors from the tx_ring
2486  *
2487  * We want to clear all pending descriptors from the TX ring.
2488  * zeroing happens when the HW reads the regs. We assign the ring itself as
2489  * the data of the next descriptor. We don't care about the data we are about
2490  * to reset the HW.
2491  **********************************************************************/
2492 static void
2493 em_flush_tx_ring(struct e1000_softc *sc)
2494 {
2495 	struct e1000_hw		*hw = &sc->hw;
2496 	struct tx_ring		*txr = &sc->tx_queues->txr;
2497 	struct e1000_tx_desc	*txd;
2498 	u32			tctl, txd_lower = E1000_TXD_CMD_IFCS;
2499 	u16			size = 512;
2500 
2501 	tctl = E1000_READ_REG(hw, E1000_TCTL);
2502 	E1000_WRITE_REG(hw, E1000_TCTL, tctl | E1000_TCTL_EN);
2503 
2504 	txd = &txr->tx_base[txr->tx_cidx_processed];
2505 
2506 	/* Just use the ring as a dummy buffer addr */
2507 	txd->buffer_addr = txr->tx_paddr;
2508 	txd->lower.data = htole32(txd_lower | size);
2509 	txd->upper.data = 0;
2510 
2511 	/* flush descriptors to memory before notifying the HW */
2512 	wmb();
2513 
2514 	E1000_WRITE_REG(hw, E1000_TDT(0), txr->tx_cidx_processed);
2515 	mb();
2516 	usec_delay(250);
2517 }
2518 
2519 /*********************************************************************
2520  * em_flush_rx_ring - remove all descriptors from the rx_ring
2521  *
2522  * Mark all descriptors in the RX ring as consumed and disable the rx ring
2523  **********************************************************************/
2524 static void
2525 em_flush_rx_ring(struct e1000_softc *sc)
2526 {
2527 	struct e1000_hw	*hw = &sc->hw;
2528 	u32		rctl, rxdctl;
2529 
2530 	rctl = E1000_READ_REG(hw, E1000_RCTL);
2531 	E1000_WRITE_REG(hw, E1000_RCTL, rctl & ~E1000_RCTL_EN);
2532 	E1000_WRITE_FLUSH(hw);
2533 	usec_delay(150);
2534 
2535 	rxdctl = E1000_READ_REG(hw, E1000_RXDCTL(0));
2536 	/* zero the lower 14 bits (prefetch and host thresholds) */
2537 	rxdctl &= 0xffffc000;
2538 	/*
2539 	 * update thresholds: prefetch threshold to 31, host threshold to 1
2540 	 * and make sure the granularity is "descriptors" and not "cache lines"
2541 	 */
2542 	rxdctl |= (0x1F | (1 << 8) | E1000_RXDCTL_THRESH_UNIT_DESC);
2543 	E1000_WRITE_REG(hw, E1000_RXDCTL(0), rxdctl);
2544 
2545 	/* momentarily enable the RX ring for the changes to take effect */
2546 	E1000_WRITE_REG(hw, E1000_RCTL, rctl | E1000_RCTL_EN);
2547 	E1000_WRITE_FLUSH(hw);
2548 	usec_delay(150);
2549 	E1000_WRITE_REG(hw, E1000_RCTL, rctl & ~E1000_RCTL_EN);
2550 }
2551 
2552 /*********************************************************************
2553  * em_flush_desc_rings - remove all descriptors from the descriptor rings
2554  *
2555  * In I219, the descriptor rings must be emptied before resetting the HW
2556  * or before changing the device state to D3 during runtime (runtime PM).
2557  *
2558  * Failure to do this will cause the HW to enter a unit hang state which can
2559  * only be released by PCI reset on the device
2560  *
2561  **********************************************************************/
2562 static void
2563 em_flush_desc_rings(struct e1000_softc *sc)
2564 {
2565 	struct e1000_hw	*hw = &sc->hw;
2566 	device_t dev = sc->dev;
2567 	u16		hang_state;
2568 	u32		fext_nvm11, tdlen;
2569 
2570 	/* First, disable MULR fix in FEXTNVM11 */
2571 	fext_nvm11 = E1000_READ_REG(hw, E1000_FEXTNVM11);
2572 	fext_nvm11 |= E1000_FEXTNVM11_DISABLE_MULR_FIX;
2573 	E1000_WRITE_REG(hw, E1000_FEXTNVM11, fext_nvm11);
2574 
2575 	/* do nothing if we're not in faulty state, or if the queue is empty */
2576 	tdlen = E1000_READ_REG(hw, E1000_TDLEN(0));
2577 	hang_state = pci_read_config(dev, PCICFG_DESC_RING_STATUS, 2);
2578 	if (!(hang_state & FLUSH_DESC_REQUIRED) || !tdlen)
2579 		return;
2580 	em_flush_tx_ring(sc);
2581 
2582 	/* recheck, maybe the fault is caused by the rx ring */
2583 	hang_state = pci_read_config(dev, PCICFG_DESC_RING_STATUS, 2);
2584 	if (hang_state & FLUSH_DESC_REQUIRED)
2585 		em_flush_rx_ring(sc);
2586 }
2587 
2588 
2589 /*********************************************************************
2590  *
2591  *  Initialize the hardware to a configuration as specified by the
2592  *  sc structure.
2593  *
2594  **********************************************************************/
2595 static void
2596 em_reset(if_ctx_t ctx)
2597 {
2598 	device_t dev = iflib_get_dev(ctx);
2599 	struct e1000_softc *sc = iflib_get_softc(ctx);
2600 	if_t ifp = iflib_get_ifp(ctx);
2601 	struct e1000_hw *hw = &sc->hw;
2602 	u32 rx_buffer_size;
2603 	u32 pba;
2604 
2605 	INIT_DEBUGOUT("em_reset: begin");
2606 	/* Let the firmware know the OS is in control */
2607 	em_get_hw_control(sc);
2608 
2609 	/* Set up smart power down as default off on newer adapters. */
2610 	if (!em_smart_pwr_down && (hw->mac.type == e1000_82571 ||
2611 	    hw->mac.type == e1000_82572)) {
2612 		u16 phy_tmp = 0;
2613 
2614 		/* Speed up time to link by disabling smart power down. */
2615 		e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_tmp);
2616 		phy_tmp &= ~IGP02E1000_PM_SPD;
2617 		e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_tmp);
2618 	}
2619 
2620 	/*
2621 	 * Packet Buffer Allocation (PBA)
2622 	 * Writing PBA sets the receive portion of the buffer
2623 	 * the remainder is used for the transmit buffer.
2624 	 */
2625 	switch (hw->mac.type) {
2626 	/* 82547: Total Packet Buffer is 40K */
2627 	case e1000_82547:
2628 	case e1000_82547_rev_2:
2629 		if (hw->mac.max_frame_size > 8192)
2630 			pba = E1000_PBA_22K; /* 22K for Rx, 18K for Tx */
2631 		else
2632 			pba = E1000_PBA_30K; /* 30K for Rx, 10K for Tx */
2633 		break;
2634 	/* 82571/82572/80003es2lan: Total Packet Buffer is 48K */
2635 	case e1000_82571:
2636 	case e1000_82572:
2637 	case e1000_80003es2lan:
2638 			pba = E1000_PBA_32K; /* 32K for Rx, 16K for Tx */
2639 		break;
2640 	/* 82573: Total Packet Buffer is 32K */
2641 	case e1000_82573:
2642 			pba = E1000_PBA_12K; /* 12K for Rx, 20K for Tx */
2643 		break;
2644 	case e1000_82574:
2645 	case e1000_82583:
2646 			pba = E1000_PBA_20K; /* 20K for Rx, 20K for Tx */
2647 		break;
2648 	case e1000_ich8lan:
2649 		pba = E1000_PBA_8K;
2650 		break;
2651 	case e1000_ich9lan:
2652 	case e1000_ich10lan:
2653 		/* Boost Receive side for jumbo frames */
2654 		if (hw->mac.max_frame_size > 4096)
2655 			pba = E1000_PBA_14K;
2656 		else
2657 			pba = E1000_PBA_10K;
2658 		break;
2659 	case e1000_pchlan:
2660 	case e1000_pch2lan:
2661 	case e1000_pch_lpt:
2662 	case e1000_pch_spt:
2663 	case e1000_pch_cnp:
2664 	case e1000_pch_tgp:
2665 	case e1000_pch_adp:
2666 	case e1000_pch_mtp:
2667 	case e1000_pch_ptp:
2668 		pba = E1000_PBA_26K;
2669 		break;
2670 	case e1000_82575:
2671 		pba = E1000_PBA_32K;
2672 		break;
2673 	case e1000_82576:
2674 	case e1000_vfadapt:
2675 		pba = E1000_READ_REG(hw, E1000_RXPBS);
2676 		pba &= E1000_RXPBS_SIZE_MASK_82576;
2677 		break;
2678 	case e1000_82580:
2679 	case e1000_i350:
2680 	case e1000_i354:
2681 	case e1000_vfadapt_i350:
2682 		pba = E1000_READ_REG(hw, E1000_RXPBS);
2683 		pba = e1000_rxpbs_adjust_82580(pba);
2684 		break;
2685 	case e1000_i210:
2686 	case e1000_i211:
2687 		pba = E1000_PBA_34K;
2688 		break;
2689 	default:
2690 		/* Remaining devices assumed to have a Packet Buffer of 64K. */
2691 		if (hw->mac.max_frame_size > 8192)
2692 			pba = E1000_PBA_40K; /* 40K for Rx, 24K for Tx */
2693 		else
2694 			pba = E1000_PBA_48K; /* 48K for Rx, 16K for Tx */
2695 	}
2696 
2697 	/* Special needs in case of Jumbo frames */
2698 	if ((hw->mac.type == e1000_82575) && (if_getmtu(ifp) > ETHERMTU)) {
2699 		u32 tx_space, min_tx, min_rx;
2700 		pba = E1000_READ_REG(hw, E1000_PBA);
2701 		tx_space = pba >> 16;
2702 		pba &= 0xffff;
2703 		min_tx = (hw->mac.max_frame_size +
2704 		    sizeof(struct e1000_tx_desc) - ETHERNET_FCS_SIZE) * 2;
2705 		min_tx = roundup2(min_tx, 1024);
2706 		min_tx >>= 10;
2707 		min_rx = hw->mac.max_frame_size;
2708 		min_rx = roundup2(min_rx, 1024);
2709 		min_rx >>= 10;
2710 		if (tx_space < min_tx &&
2711 		    ((min_tx - tx_space) < pba)) {
2712 			pba = pba - (min_tx - tx_space);
2713 			/*
2714 			 * if short on rx space, rx wins
2715 			 * and must trump tx adjustment
2716 			 */
2717 			if (pba < min_rx)
2718 				pba = min_rx;
2719 		}
2720 		E1000_WRITE_REG(hw, E1000_PBA, pba);
2721 	}
2722 
2723 	if (hw->mac.type < igb_mac_min)
2724 		E1000_WRITE_REG(hw, E1000_PBA, pba);
2725 
2726 	INIT_DEBUGOUT1("em_reset: pba=%dK",pba);
2727 
2728 	/*
2729 	 * These parameters control the automatic generation (Tx) and
2730 	 * response (Rx) to Ethernet PAUSE frames.
2731 	 * - High water mark should allow for at least two frames to be
2732 	 *   received after sending an XOFF.
2733 	 * - Low water mark works best when it is very near the high water mark.
2734 	 *   This allows the receiver to restart by sending XON when it has
2735 	 *   drained a bit. Here we use an arbitrary value of 1500 which will
2736 	 *   restart after one full frame is pulled from the buffer. There
2737 	 *   could be several smaller frames in the buffer and if so they will
2738 	 *   not trigger the XON until their total number reduces the buffer
2739 	 *   by 1500.
2740 	 * - The pause time is fairly large at 1000 x 512ns = 512 usec.
2741 	 */
2742 	rx_buffer_size = (pba & 0xffff) << 10;
2743 	hw->fc.high_water = rx_buffer_size -
2744 	    roundup2(hw->mac.max_frame_size, 1024);
2745 	hw->fc.low_water = hw->fc.high_water - 1500;
2746 
2747 	if (sc->fc) /* locally set flow control value? */
2748 		hw->fc.requested_mode = sc->fc;
2749 	else
2750 		hw->fc.requested_mode = e1000_fc_full;
2751 
2752 	if (hw->mac.type == e1000_80003es2lan)
2753 		hw->fc.pause_time = 0xFFFF;
2754 	else
2755 		hw->fc.pause_time = EM_FC_PAUSE_TIME;
2756 
2757 	hw->fc.send_xon = true;
2758 
2759 	/* Device specific overrides/settings */
2760 	switch (hw->mac.type) {
2761 	case e1000_pchlan:
2762 		/* Workaround: no TX flow ctrl for PCH */
2763 		hw->fc.requested_mode = e1000_fc_rx_pause;
2764 		hw->fc.pause_time = 0xFFFF; /* override */
2765 		if (if_getmtu(ifp) > ETHERMTU) {
2766 			hw->fc.high_water = 0x3500;
2767 			hw->fc.low_water = 0x1500;
2768 		} else {
2769 			hw->fc.high_water = 0x5000;
2770 			hw->fc.low_water = 0x3000;
2771 		}
2772 		hw->fc.refresh_time = 0x1000;
2773 		break;
2774 	case e1000_pch2lan:
2775 	case e1000_pch_lpt:
2776 	case e1000_pch_spt:
2777 	case e1000_pch_cnp:
2778 	case e1000_pch_tgp:
2779 	case e1000_pch_adp:
2780 	case e1000_pch_mtp:
2781 	case e1000_pch_ptp:
2782 		hw->fc.high_water = 0x5C20;
2783 		hw->fc.low_water = 0x5048;
2784 		hw->fc.pause_time = 0x0650;
2785 		hw->fc.refresh_time = 0x0400;
2786 		/* Jumbos need adjusted PBA */
2787 		if (if_getmtu(ifp) > ETHERMTU)
2788 			E1000_WRITE_REG(hw, E1000_PBA, 12);
2789 		else
2790 			E1000_WRITE_REG(hw, E1000_PBA, 26);
2791 		break;
2792 	case e1000_82575:
2793 	case e1000_82576:
2794 		/* 8-byte granularity */
2795 		hw->fc.low_water = hw->fc.high_water - 8;
2796 		break;
2797 	case e1000_82580:
2798 	case e1000_i350:
2799 	case e1000_i354:
2800 	case e1000_i210:
2801 	case e1000_i211:
2802 	case e1000_vfadapt:
2803 	case e1000_vfadapt_i350:
2804 		/* 16-byte granularity */
2805 		hw->fc.low_water = hw->fc.high_water - 16;
2806 		break;
2807 	case e1000_ich9lan:
2808 	case e1000_ich10lan:
2809 		if (if_getmtu(ifp) > ETHERMTU) {
2810 			hw->fc.high_water = 0x2800;
2811 			hw->fc.low_water = hw->fc.high_water - 8;
2812 			break;
2813 		}
2814 		/* FALLTHROUGH */
2815 	default:
2816 		if (hw->mac.type == e1000_80003es2lan)
2817 			hw->fc.pause_time = 0xFFFF;
2818 		break;
2819 	}
2820 
2821 	/* I219 needs some special flushing to avoid hangs */
2822 	if (sc->hw.mac.type >= e1000_pch_spt && sc->hw.mac.type < igb_mac_min)
2823 		em_flush_desc_rings(sc);
2824 
2825 	/* Issue a global reset */
2826 	e1000_reset_hw(hw);
2827 	if (hw->mac.type >= igb_mac_min) {
2828 		E1000_WRITE_REG(hw, E1000_WUC, 0);
2829 	} else {
2830 		E1000_WRITE_REG(hw, E1000_WUFC, 0);
2831 		em_disable_aspm(sc);
2832 	}
2833 	if (sc->flags & IGB_MEDIA_RESET) {
2834 		e1000_setup_init_funcs(hw, true);
2835 		e1000_get_bus_info(hw);
2836 		sc->flags &= ~IGB_MEDIA_RESET;
2837 	}
2838 	/* and a re-init */
2839 	if (e1000_init_hw(hw) < 0) {
2840 		device_printf(dev, "Hardware Initialization Failed\n");
2841 		return;
2842 	}
2843 	if (hw->mac.type >= igb_mac_min)
2844 		igb_init_dmac(sc, pba);
2845 
2846 	E1000_WRITE_REG(hw, E1000_VET, ETHERTYPE_VLAN);
2847 	e1000_get_phy_info(hw);
2848 	e1000_check_for_link(hw);
2849 }
2850 
2851 /*
2852  * Initialise the RSS mapping for NICs that support multiple transmit/
2853  * receive rings.
2854  */
2855 
2856 #define RSSKEYLEN 10
2857 static void
2858 em_initialize_rss_mapping(struct e1000_softc *sc)
2859 {
2860 	uint8_t  rss_key[4 * RSSKEYLEN];
2861 	uint32_t reta = 0;
2862 	struct e1000_hw	*hw = &sc->hw;
2863 	int i;
2864 
2865 	/*
2866 	 * Configure RSS key
2867 	 */
2868 	arc4rand(rss_key, sizeof(rss_key), 0);
2869 	for (i = 0; i < RSSKEYLEN; ++i) {
2870 		uint32_t rssrk = 0;
2871 
2872 		rssrk = EM_RSSRK_VAL(rss_key, i);
2873 		E1000_WRITE_REG(hw,E1000_RSSRK(i), rssrk);
2874 	}
2875 
2876 	/*
2877 	 * Configure RSS redirect table in following fashion:
2878 	 * (hash & ring_cnt_mask) == rdr_table[(hash & rdr_table_mask)]
2879 	 */
2880 	for (i = 0; i < sizeof(reta); ++i) {
2881 		uint32_t q;
2882 
2883 		q = (i % sc->rx_num_queues) << 7;
2884 		reta |= q << (8 * i);
2885 	}
2886 
2887 	for (i = 0; i < 32; ++i)
2888 		E1000_WRITE_REG(hw, E1000_RETA(i), reta);
2889 
2890 	E1000_WRITE_REG(hw, E1000_MRQC, E1000_MRQC_RSS_ENABLE_2Q |
2891 			E1000_MRQC_RSS_FIELD_IPV4_TCP |
2892 			E1000_MRQC_RSS_FIELD_IPV4 |
2893 			E1000_MRQC_RSS_FIELD_IPV6_TCP_EX |
2894 			E1000_MRQC_RSS_FIELD_IPV6_EX |
2895 			E1000_MRQC_RSS_FIELD_IPV6);
2896 }
2897 
2898 static void
2899 igb_initialize_rss_mapping(struct e1000_softc *sc)
2900 {
2901 	struct e1000_hw *hw = &sc->hw;
2902 	int i;
2903 	int queue_id;
2904 	u32 reta;
2905 	u32 rss_key[10], mrqc, shift = 0;
2906 
2907 	/* XXX? */
2908 	if (hw->mac.type == e1000_82575)
2909 		shift = 6;
2910 
2911 	/*
2912 	 * The redirection table controls which destination
2913 	 * queue each bucket redirects traffic to.
2914 	 * Each DWORD represents four queues, with the LSB
2915 	 * being the first queue in the DWORD.
2916 	 *
2917 	 * This just allocates buckets to queues using round-robin
2918 	 * allocation.
2919 	 *
2920 	 * NOTE: It Just Happens to line up with the default
2921 	 * RSS allocation method.
2922 	 */
2923 
2924 	/* Warning FM follows */
2925 	reta = 0;
2926 	for (i = 0; i < 128; i++) {
2927 #ifdef RSS
2928 		queue_id = rss_get_indirection_to_bucket(i);
2929 		/*
2930 		 * If we have more queues than buckets, we'll
2931 		 * end up mapping buckets to a subset of the
2932 		 * queues.
2933 		 *
2934 		 * If we have more buckets than queues, we'll
2935 		 * end up instead assigning multiple buckets
2936 		 * to queues.
2937 		 *
2938 		 * Both are suboptimal, but we need to handle
2939 		 * the case so we don't go out of bounds
2940 		 * indexing arrays and such.
2941 		 */
2942 		queue_id = queue_id % sc->rx_num_queues;
2943 #else
2944 		queue_id = (i % sc->rx_num_queues);
2945 #endif
2946 		/* Adjust if required */
2947 		queue_id = queue_id << shift;
2948 
2949 		/*
2950 		 * The low 8 bits are for hash value (n+0);
2951 		 * The next 8 bits are for hash value (n+1), etc.
2952 		 */
2953 		reta = reta >> 8;
2954 		reta = reta | ( ((uint32_t) queue_id) << 24);
2955 		if ((i & 3) == 3) {
2956 			E1000_WRITE_REG(hw, E1000_RETA(i >> 2), reta);
2957 			reta = 0;
2958 		}
2959 	}
2960 
2961 	/* Now fill in hash table */
2962 
2963 	/*
2964 	 * MRQC: Multiple Receive Queues Command
2965 	 * Set queuing to RSS control, number depends on the device.
2966 	 */
2967 	mrqc = E1000_MRQC_ENABLE_RSS_MQ;
2968 
2969 #ifdef RSS
2970 	/* XXX ew typecasting */
2971 	rss_getkey((uint8_t *) &rss_key);
2972 #else
2973 	arc4rand(&rss_key, sizeof(rss_key), 0);
2974 #endif
2975 	for (i = 0; i < 10; i++)
2976 		E1000_WRITE_REG_ARRAY(hw, E1000_RSSRK(0), i, rss_key[i]);
2977 
2978 	/*
2979 	 * Configure the RSS fields to hash upon.
2980 	 */
2981 	mrqc |= (E1000_MRQC_RSS_FIELD_IPV4 |
2982 	    E1000_MRQC_RSS_FIELD_IPV4_TCP);
2983 	mrqc |= (E1000_MRQC_RSS_FIELD_IPV6 |
2984 	    E1000_MRQC_RSS_FIELD_IPV6_TCP);
2985 	mrqc |=( E1000_MRQC_RSS_FIELD_IPV4_UDP |
2986 	    E1000_MRQC_RSS_FIELD_IPV6_UDP);
2987 	mrqc |=( E1000_MRQC_RSS_FIELD_IPV6_UDP_EX |
2988 	    E1000_MRQC_RSS_FIELD_IPV6_TCP_EX);
2989 
2990 	E1000_WRITE_REG(hw, E1000_MRQC, mrqc);
2991 }
2992 
2993 /*********************************************************************
2994  *
2995  *  Setup networking device structure and register interface media.
2996  *
2997  **********************************************************************/
2998 static int
2999 em_setup_interface(if_ctx_t ctx)
3000 {
3001 	if_t ifp = iflib_get_ifp(ctx);
3002 	struct e1000_softc *sc = iflib_get_softc(ctx);
3003 	if_softc_ctx_t scctx = sc->shared;
3004 
3005 	INIT_DEBUGOUT("em_setup_interface: begin");
3006 
3007 	/* Single Queue */
3008 	if (sc->tx_num_queues == 1) {
3009 		if_setsendqlen(ifp, scctx->isc_ntxd[0] - 1);
3010 		if_setsendqready(ifp);
3011 	}
3012 
3013 	/*
3014 	 * Specify the media types supported by this adapter and register
3015 	 * callbacks to update media and link information
3016 	 */
3017 	if (sc->hw.phy.media_type == e1000_media_type_fiber ||
3018 	    sc->hw.phy.media_type == e1000_media_type_internal_serdes) {
3019 		u_char fiber_type = IFM_1000_SX;	/* default type */
3020 
3021 		if (sc->hw.mac.type == e1000_82545)
3022 			fiber_type = IFM_1000_LX;
3023 		ifmedia_add(sc->media, IFM_ETHER | fiber_type | IFM_FDX, 0, NULL);
3024 		ifmedia_add(sc->media, IFM_ETHER | fiber_type, 0, NULL);
3025 	} else {
3026 		ifmedia_add(sc->media, IFM_ETHER | IFM_10_T, 0, NULL);
3027 		ifmedia_add(sc->media, IFM_ETHER | IFM_10_T | IFM_FDX, 0, NULL);
3028 		ifmedia_add(sc->media, IFM_ETHER | IFM_100_TX, 0, NULL);
3029 		ifmedia_add(sc->media, IFM_ETHER | IFM_100_TX | IFM_FDX, 0, NULL);
3030 		if (sc->hw.phy.type != e1000_phy_ife) {
3031 			ifmedia_add(sc->media, IFM_ETHER | IFM_1000_T | IFM_FDX, 0, NULL);
3032 			ifmedia_add(sc->media, IFM_ETHER | IFM_1000_T, 0, NULL);
3033 		}
3034 	}
3035 	ifmedia_add(sc->media, IFM_ETHER | IFM_AUTO, 0, NULL);
3036 	ifmedia_set(sc->media, IFM_ETHER | IFM_AUTO);
3037 	return (0);
3038 }
3039 
3040 static int
3041 em_if_tx_queues_alloc(if_ctx_t ctx, caddr_t *vaddrs, uint64_t *paddrs, int ntxqs, int ntxqsets)
3042 {
3043 	struct e1000_softc *sc = iflib_get_softc(ctx);
3044 	if_softc_ctx_t scctx = sc->shared;
3045 	int error = E1000_SUCCESS;
3046 	struct em_tx_queue *que;
3047 	int i, j;
3048 
3049 	MPASS(sc->tx_num_queues > 0);
3050 	MPASS(sc->tx_num_queues == ntxqsets);
3051 
3052 	/* First allocate the top level queue structs */
3053 	if (!(sc->tx_queues =
3054 	    (struct em_tx_queue *) malloc(sizeof(struct em_tx_queue) *
3055 	    sc->tx_num_queues, M_DEVBUF, M_NOWAIT | M_ZERO))) {
3056 		device_printf(iflib_get_dev(ctx), "Unable to allocate queue memory\n");
3057 		return(ENOMEM);
3058 	}
3059 
3060 	for (i = 0, que = sc->tx_queues; i < sc->tx_num_queues; i++, que++) {
3061 		/* Set up some basics */
3062 
3063 		struct tx_ring *txr = &que->txr;
3064 		txr->sc = que->sc = sc;
3065 		que->me = txr->me =  i;
3066 
3067 		/* Allocate report status array */
3068 		if (!(txr->tx_rsq = (qidx_t *) malloc(sizeof(qidx_t) * scctx->isc_ntxd[0], M_DEVBUF, M_NOWAIT | M_ZERO))) {
3069 			device_printf(iflib_get_dev(ctx), "failed to allocate rs_idxs memory\n");
3070 			error = ENOMEM;
3071 			goto fail;
3072 		}
3073 		for (j = 0; j < scctx->isc_ntxd[0]; j++)
3074 			txr->tx_rsq[j] = QIDX_INVALID;
3075 		/* get the virtual and physical address of the hardware queues */
3076 		txr->tx_base = (struct e1000_tx_desc *)vaddrs[i*ntxqs];
3077 		txr->tx_paddr = paddrs[i*ntxqs];
3078 	}
3079 
3080 	if (bootverbose)
3081 		device_printf(iflib_get_dev(ctx),
3082 		    "allocated for %d tx_queues\n", sc->tx_num_queues);
3083 	return (0);
3084 fail:
3085 	em_if_queues_free(ctx);
3086 	return (error);
3087 }
3088 
3089 static int
3090 em_if_rx_queues_alloc(if_ctx_t ctx, caddr_t *vaddrs, uint64_t *paddrs, int nrxqs, int nrxqsets)
3091 {
3092 	struct e1000_softc *sc = iflib_get_softc(ctx);
3093 	int error = E1000_SUCCESS;
3094 	struct em_rx_queue *que;
3095 	int i;
3096 
3097 	MPASS(sc->rx_num_queues > 0);
3098 	MPASS(sc->rx_num_queues == nrxqsets);
3099 
3100 	/* First allocate the top level queue structs */
3101 	if (!(sc->rx_queues =
3102 	    (struct em_rx_queue *) malloc(sizeof(struct em_rx_queue) *
3103 	    sc->rx_num_queues, M_DEVBUF, M_NOWAIT | M_ZERO))) {
3104 		device_printf(iflib_get_dev(ctx), "Unable to allocate queue memory\n");
3105 		error = ENOMEM;
3106 		goto fail;
3107 	}
3108 
3109 	for (i = 0, que = sc->rx_queues; i < nrxqsets; i++, que++) {
3110 		/* Set up some basics */
3111 		struct rx_ring *rxr = &que->rxr;
3112 		rxr->sc = que->sc = sc;
3113 		rxr->que = que;
3114 		que->me = rxr->me =  i;
3115 
3116 		/* get the virtual and physical address of the hardware queues */
3117 		rxr->rx_base = (union e1000_rx_desc_extended *)vaddrs[i*nrxqs];
3118 		rxr->rx_paddr = paddrs[i*nrxqs];
3119 	}
3120 
3121 	if (bootverbose)
3122 		device_printf(iflib_get_dev(ctx),
3123 		    "allocated for %d rx_queues\n", sc->rx_num_queues);
3124 
3125 	return (0);
3126 fail:
3127 	em_if_queues_free(ctx);
3128 	return (error);
3129 }
3130 
3131 static void
3132 em_if_queues_free(if_ctx_t ctx)
3133 {
3134 	struct e1000_softc *sc = iflib_get_softc(ctx);
3135 	struct em_tx_queue *tx_que = sc->tx_queues;
3136 	struct em_rx_queue *rx_que = sc->rx_queues;
3137 
3138 	if (tx_que != NULL) {
3139 		for (int i = 0; i < sc->tx_num_queues; i++, tx_que++) {
3140 			struct tx_ring *txr = &tx_que->txr;
3141 			if (txr->tx_rsq == NULL)
3142 				break;
3143 
3144 			free(txr->tx_rsq, M_DEVBUF);
3145 			txr->tx_rsq = NULL;
3146 		}
3147 		free(sc->tx_queues, M_DEVBUF);
3148 		sc->tx_queues = NULL;
3149 	}
3150 
3151 	if (rx_que != NULL) {
3152 		free(sc->rx_queues, M_DEVBUF);
3153 		sc->rx_queues = NULL;
3154 	}
3155 }
3156 
3157 /*********************************************************************
3158  *
3159  *  Enable transmit unit.
3160  *
3161  **********************************************************************/
3162 static void
3163 em_initialize_transmit_unit(if_ctx_t ctx)
3164 {
3165 	struct e1000_softc *sc = iflib_get_softc(ctx);
3166 	if_softc_ctx_t scctx = sc->shared;
3167 	struct em_tx_queue *que;
3168 	struct tx_ring	*txr;
3169 	struct e1000_hw	*hw = &sc->hw;
3170 	u32 tctl, txdctl = 0, tarc, tipg = 0;
3171 
3172 	INIT_DEBUGOUT("em_initialize_transmit_unit: begin");
3173 
3174 	for (int i = 0; i < sc->tx_num_queues; i++, txr++) {
3175 		u64 bus_addr;
3176 		caddr_t offp, endp;
3177 
3178 		que = &sc->tx_queues[i];
3179 		txr = &que->txr;
3180 		bus_addr = txr->tx_paddr;
3181 
3182 		/* Clear checksum offload context. */
3183 		offp = (caddr_t)&txr->csum_flags;
3184 		endp = (caddr_t)(txr + 1);
3185 		bzero(offp, endp - offp);
3186 
3187 		/* Base and Len of TX Ring */
3188 		E1000_WRITE_REG(hw, E1000_TDLEN(i),
3189 		    scctx->isc_ntxd[0] * sizeof(struct e1000_tx_desc));
3190 		E1000_WRITE_REG(hw, E1000_TDBAH(i),
3191 		    (u32)(bus_addr >> 32));
3192 		E1000_WRITE_REG(hw, E1000_TDBAL(i),
3193 		    (u32)bus_addr);
3194 		/* Init the HEAD/TAIL indices */
3195 		E1000_WRITE_REG(hw, E1000_TDT(i), 0);
3196 		E1000_WRITE_REG(hw, E1000_TDH(i), 0);
3197 
3198 		HW_DEBUGOUT2("Base = %x, Length = %x\n",
3199 		    E1000_READ_REG(hw, E1000_TDBAL(i)),
3200 		    E1000_READ_REG(hw, E1000_TDLEN(i)));
3201 
3202 		txdctl = 0; /* clear txdctl */
3203 		txdctl |= 0x1f; /* PTHRESH */
3204 		txdctl |= 1 << 8; /* HTHRESH */
3205 		txdctl |= 1 << 16;/* WTHRESH */
3206 		txdctl |= 1 << 22; /* Reserved bit 22 must always be 1 */
3207 		txdctl |= E1000_TXDCTL_GRAN;
3208 		txdctl |= 1 << 25; /* LWTHRESH */
3209 
3210 		E1000_WRITE_REG(hw, E1000_TXDCTL(i), txdctl);
3211 	}
3212 
3213 	/* Set the default values for the Tx Inter Packet Gap timer */
3214 	switch (hw->mac.type) {
3215 	case e1000_80003es2lan:
3216 		tipg = DEFAULT_82543_TIPG_IPGR1;
3217 		tipg |= DEFAULT_80003ES2LAN_TIPG_IPGR2 <<
3218 		    E1000_TIPG_IPGR2_SHIFT;
3219 		break;
3220 	case e1000_82542:
3221 		tipg = DEFAULT_82542_TIPG_IPGT;
3222 		tipg |= DEFAULT_82542_TIPG_IPGR1 << E1000_TIPG_IPGR1_SHIFT;
3223 		tipg |= DEFAULT_82542_TIPG_IPGR2 << E1000_TIPG_IPGR2_SHIFT;
3224 		break;
3225 	default:
3226 		if (hw->phy.media_type == e1000_media_type_fiber ||
3227 		    hw->phy.media_type == e1000_media_type_internal_serdes)
3228 			tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
3229 		else
3230 			tipg = DEFAULT_82543_TIPG_IPGT_COPPER;
3231 		tipg |= DEFAULT_82543_TIPG_IPGR1 << E1000_TIPG_IPGR1_SHIFT;
3232 		tipg |= DEFAULT_82543_TIPG_IPGR2 << E1000_TIPG_IPGR2_SHIFT;
3233 	}
3234 
3235 	E1000_WRITE_REG(hw, E1000_TIPG, tipg);
3236 	E1000_WRITE_REG(hw, E1000_TIDV, sc->tx_int_delay.value);
3237 
3238 	if(hw->mac.type >= e1000_82540)
3239 		E1000_WRITE_REG(hw, E1000_TADV,
3240 		    sc->tx_abs_int_delay.value);
3241 
3242 	if (hw->mac.type == e1000_82571 || hw->mac.type == e1000_82572) {
3243 		tarc = E1000_READ_REG(hw, E1000_TARC(0));
3244 		tarc |= TARC_SPEED_MODE_BIT;
3245 		E1000_WRITE_REG(hw, E1000_TARC(0), tarc);
3246 	} else if (hw->mac.type == e1000_80003es2lan) {
3247 		/* errata: program both queues to unweighted RR */
3248 		tarc = E1000_READ_REG(hw, E1000_TARC(0));
3249 		tarc |= 1;
3250 		E1000_WRITE_REG(hw, E1000_TARC(0), tarc);
3251 		tarc = E1000_READ_REG(hw, E1000_TARC(1));
3252 		tarc |= 1;
3253 		E1000_WRITE_REG(hw, E1000_TARC(1), tarc);
3254 	} else if (hw->mac.type == e1000_82574) {
3255 		tarc = E1000_READ_REG(hw, E1000_TARC(0));
3256 		tarc |= TARC_ERRATA_BIT;
3257 		if ( sc->tx_num_queues > 1) {
3258 			tarc |= (TARC_COMPENSATION_MODE | TARC_MQ_FIX);
3259 			E1000_WRITE_REG(hw, E1000_TARC(0), tarc);
3260 			E1000_WRITE_REG(hw, E1000_TARC(1), tarc);
3261 		} else
3262 			E1000_WRITE_REG(hw, E1000_TARC(0), tarc);
3263 	}
3264 
3265 	if (sc->tx_int_delay.value > 0)
3266 		sc->txd_cmd |= E1000_TXD_CMD_IDE;
3267 
3268 	/* Program the Transmit Control Register */
3269 	tctl = E1000_READ_REG(hw, E1000_TCTL);
3270 	tctl &= ~E1000_TCTL_CT;
3271 	tctl |= (E1000_TCTL_PSP | E1000_TCTL_RTLC | E1000_TCTL_EN |
3272 		   (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT));
3273 
3274 	if (hw->mac.type >= e1000_82571)
3275 		tctl |= E1000_TCTL_MULR;
3276 
3277 	/* This write will effectively turn on the transmit unit. */
3278 	E1000_WRITE_REG(hw, E1000_TCTL, tctl);
3279 
3280 	/* SPT and KBL errata workarounds */
3281 	if (hw->mac.type == e1000_pch_spt) {
3282 		u32 reg;
3283 		reg = E1000_READ_REG(hw, E1000_IOSFPC);
3284 		reg |= E1000_RCTL_RDMTS_HEX;
3285 		E1000_WRITE_REG(hw, E1000_IOSFPC, reg);
3286 		/* i218-i219 Specification Update 1.5.4.5 */
3287 		reg = E1000_READ_REG(hw, E1000_TARC(0));
3288 		reg &= ~E1000_TARC0_CB_MULTIQ_3_REQ;
3289 		reg |= E1000_TARC0_CB_MULTIQ_2_REQ;
3290 		E1000_WRITE_REG(hw, E1000_TARC(0), reg);
3291 	}
3292 }
3293 
3294 /*********************************************************************
3295  *
3296  *  Enable receive unit.
3297  *
3298  **********************************************************************/
3299 #define BSIZEPKT_ROUNDUP ((1<<E1000_SRRCTL_BSIZEPKT_SHIFT)-1)
3300 
3301 static void
3302 em_initialize_receive_unit(if_ctx_t ctx)
3303 {
3304 	struct e1000_softc *sc = iflib_get_softc(ctx);
3305 	if_softc_ctx_t scctx = sc->shared;
3306 	if_t ifp = iflib_get_ifp(ctx);
3307 	struct e1000_hw	*hw = &sc->hw;
3308 	struct em_rx_queue *que;
3309 	int i;
3310 	uint32_t rctl, rxcsum;
3311 
3312 	INIT_DEBUGOUT("em_initialize_receive_units: begin");
3313 
3314 	/*
3315 	 * Make sure receives are disabled while setting
3316 	 * up the descriptor ring
3317 	 */
3318 	rctl = E1000_READ_REG(hw, E1000_RCTL);
3319 	/* Do not disable if ever enabled on this hardware */
3320 	if ((hw->mac.type != e1000_82574) && (hw->mac.type != e1000_82583))
3321 		E1000_WRITE_REG(hw, E1000_RCTL, rctl & ~E1000_RCTL_EN);
3322 
3323 	/* Setup the Receive Control Register */
3324 	rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
3325 	rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
3326 	    E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
3327 	    (hw->mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
3328 
3329 	/* Do not store bad packets */
3330 	rctl &= ~E1000_RCTL_SBP;
3331 
3332 	/* Enable Long Packet receive */
3333 	if (if_getmtu(ifp) > ETHERMTU)
3334 		rctl |= E1000_RCTL_LPE;
3335 	else
3336 		rctl &= ~E1000_RCTL_LPE;
3337 
3338 	/* Strip the CRC */
3339 	if (!em_disable_crc_stripping)
3340 		rctl |= E1000_RCTL_SECRC;
3341 
3342 	if (hw->mac.type >= e1000_82540) {
3343 		E1000_WRITE_REG(hw, E1000_RADV,
3344 		    sc->rx_abs_int_delay.value);
3345 
3346 		/*
3347 		 * Set the interrupt throttling rate. Value is calculated
3348 		 * as DEFAULT_ITR = 1/(MAX_INTS_PER_SEC * 256ns)
3349 		 */
3350 		E1000_WRITE_REG(hw, E1000_ITR, DEFAULT_ITR);
3351 	}
3352 	E1000_WRITE_REG(hw, E1000_RDTR, sc->rx_int_delay.value);
3353 
3354 	if (hw->mac.type >= em_mac_min) {
3355 		uint32_t rfctl;
3356 		/* Use extended rx descriptor formats */
3357 		rfctl = E1000_READ_REG(hw, E1000_RFCTL);
3358 		rfctl |= E1000_RFCTL_EXTEN;
3359 
3360 		/*
3361 		 * When using MSI-X interrupts we need to throttle
3362 		 * using the EITR register (82574 only)
3363 		 */
3364 		if (hw->mac.type == e1000_82574) {
3365 			for (int i = 0; i < 4; i++)
3366 				E1000_WRITE_REG(hw, E1000_EITR_82574(i),
3367 				    DEFAULT_ITR);
3368 			/* Disable accelerated acknowledge */
3369 			rfctl |= E1000_RFCTL_ACK_DIS;
3370 		}
3371 		E1000_WRITE_REG(hw, E1000_RFCTL, rfctl);
3372 	}
3373 
3374 	/* Set up L3 and L4 csum Rx descriptor offloads */
3375 	rxcsum = E1000_READ_REG(hw, E1000_RXCSUM);
3376 	if (if_getcapenable(ifp) & IFCAP_RXCSUM) {
3377 		rxcsum |= E1000_RXCSUM_TUOFL | E1000_RXCSUM_IPOFL;
3378 		if (hw->mac.type > e1000_82575)
3379 			rxcsum |= E1000_RXCSUM_CRCOFL;
3380 		else if (hw->mac.type < em_mac_min &&
3381 		    if_getcapenable(ifp) & IFCAP_HWCSUM_IPV6)
3382 			rxcsum |= E1000_RXCSUM_IPV6OFL;
3383 	} else {
3384 		rxcsum &= ~(E1000_RXCSUM_IPOFL | E1000_RXCSUM_TUOFL);
3385 		if (hw->mac.type > e1000_82575)
3386 			rxcsum &= ~E1000_RXCSUM_CRCOFL;
3387 		else if (hw->mac.type < em_mac_min)
3388 			rxcsum &= ~E1000_RXCSUM_IPV6OFL;
3389 	}
3390 
3391 	if (sc->rx_num_queues > 1) {
3392 		/* RSS hash needed in the Rx descriptor */
3393 		rxcsum |= E1000_RXCSUM_PCSD;
3394 
3395 		if (hw->mac.type >= igb_mac_min)
3396 			igb_initialize_rss_mapping(sc);
3397 		else
3398 			em_initialize_rss_mapping(sc);
3399 	}
3400 	E1000_WRITE_REG(hw, E1000_RXCSUM, rxcsum);
3401 
3402 	/*
3403 	 * XXX TEMPORARY WORKAROUND: on some systems with 82573
3404 	 * long latencies are observed, like Lenovo X60. This
3405 	 * change eliminates the problem, but since having positive
3406 	 * values in RDTR is a known source of problems on other
3407 	 * platforms another solution is being sought.
3408 	 */
3409 	if (hw->mac.type == e1000_82573)
3410 		E1000_WRITE_REG(hw, E1000_RDTR, 0x20);
3411 
3412 	for (i = 0, que = sc->rx_queues; i < sc->rx_num_queues; i++, que++) {
3413 		struct rx_ring *rxr = &que->rxr;
3414 		/* Setup the Base and Length of the Rx Descriptor Ring */
3415 		u64 bus_addr = rxr->rx_paddr;
3416 #if 0
3417 		u32 rdt = sc->rx_num_queues -1;  /* default */
3418 #endif
3419 
3420 		E1000_WRITE_REG(hw, E1000_RDLEN(i),
3421 		    scctx->isc_nrxd[0] * sizeof(union e1000_rx_desc_extended));
3422 		E1000_WRITE_REG(hw, E1000_RDBAH(i), (u32)(bus_addr >> 32));
3423 		E1000_WRITE_REG(hw, E1000_RDBAL(i), (u32)bus_addr);
3424 		/* Setup the Head and Tail Descriptor Pointers */
3425 		E1000_WRITE_REG(hw, E1000_RDH(i), 0);
3426 		E1000_WRITE_REG(hw, E1000_RDT(i), 0);
3427 	}
3428 
3429 	/*
3430 	 * Set PTHRESH for improved jumbo performance
3431 	 * According to 10.2.5.11 of Intel 82574 Datasheet,
3432 	 * RXDCTL(1) is written whenever RXDCTL(0) is written.
3433 	 * Only write to RXDCTL(1) if there is a need for different
3434 	 * settings.
3435 	 */
3436 	if ((hw->mac.type == e1000_ich9lan || hw->mac.type == e1000_pch2lan ||
3437 	    hw->mac.type == e1000_ich10lan) && if_getmtu(ifp) > ETHERMTU) {
3438 		u32 rxdctl = E1000_READ_REG(hw, E1000_RXDCTL(0));
3439 		E1000_WRITE_REG(hw, E1000_RXDCTL(0), rxdctl | 3);
3440 	} else if (hw->mac.type == e1000_82574) {
3441 		for (int i = 0; i < sc->rx_num_queues; i++) {
3442 			u32 rxdctl = E1000_READ_REG(hw, E1000_RXDCTL(i));
3443 			rxdctl |= 0x20; /* PTHRESH */
3444 			rxdctl |= 4 << 8; /* HTHRESH */
3445 			rxdctl |= 4 << 16;/* WTHRESH */
3446 			rxdctl |= 1 << 24; /* Switch to granularity */
3447 			E1000_WRITE_REG(hw, E1000_RXDCTL(i), rxdctl);
3448 		}
3449 	} else if (hw->mac.type >= igb_mac_min) {
3450 		u32 psize, srrctl = 0;
3451 
3452 		if (if_getmtu(ifp) > ETHERMTU) {
3453 			psize = scctx->isc_max_frame_size;
3454 			/* are we on a vlan? */
3455 			if (if_vlantrunkinuse(ifp))
3456 				psize += VLAN_TAG_SIZE;
3457 
3458 			if (sc->vf_ifp)
3459 				e1000_rlpml_set_vf(hw, psize);
3460 			else
3461 				E1000_WRITE_REG(hw, E1000_RLPML, psize);
3462 		}
3463 
3464 		/* Set maximum packet buffer len */
3465 		srrctl |= (sc->rx_mbuf_sz + BSIZEPKT_ROUNDUP) >>
3466 		    E1000_SRRCTL_BSIZEPKT_SHIFT;
3467 
3468 		/*
3469 		 * If TX flow control is disabled and there's >1 queue defined,
3470 		 * enable DROP.
3471 		 *
3472 		 * This drops frames rather than hanging the RX MAC for all queues.
3473 		 */
3474 		if ((sc->rx_num_queues > 1) &&
3475 		    (sc->fc == e1000_fc_none ||
3476 		     sc->fc == e1000_fc_rx_pause)) {
3477 			srrctl |= E1000_SRRCTL_DROP_EN;
3478 		}
3479 			/* Setup the Base and Length of the Rx Descriptor Rings */
3480 		for (i = 0, que = sc->rx_queues; i < sc->rx_num_queues; i++, que++) {
3481 			struct rx_ring *rxr = &que->rxr;
3482 			u64 bus_addr = rxr->rx_paddr;
3483 			u32 rxdctl;
3484 
3485 #ifdef notyet
3486 			/* Configure for header split? -- ignore for now */
3487 			rxr->hdr_split = igb_header_split;
3488 #else
3489 			srrctl |= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF;
3490 #endif
3491 
3492 			E1000_WRITE_REG(hw, E1000_RDLEN(i),
3493 					scctx->isc_nrxd[0] * sizeof(struct e1000_rx_desc));
3494 			E1000_WRITE_REG(hw, E1000_RDBAH(i),
3495 					(uint32_t)(bus_addr >> 32));
3496 			E1000_WRITE_REG(hw, E1000_RDBAL(i),
3497 					(uint32_t)bus_addr);
3498 			E1000_WRITE_REG(hw, E1000_SRRCTL(i), srrctl);
3499 			/* Enable this Queue */
3500 			rxdctl = E1000_READ_REG(hw, E1000_RXDCTL(i));
3501 			rxdctl |= E1000_RXDCTL_QUEUE_ENABLE;
3502 			rxdctl &= 0xFFF00000;
3503 			rxdctl |= IGB_RX_PTHRESH;
3504 			rxdctl |= IGB_RX_HTHRESH << 8;
3505 			rxdctl |= IGB_RX_WTHRESH << 16;
3506 			E1000_WRITE_REG(hw, E1000_RXDCTL(i), rxdctl);
3507 		}
3508 	} else if (hw->mac.type >= e1000_pch2lan) {
3509 		if (if_getmtu(ifp) > ETHERMTU)
3510 			e1000_lv_jumbo_workaround_ich8lan(hw, true);
3511 		else
3512 			e1000_lv_jumbo_workaround_ich8lan(hw, false);
3513 	}
3514 
3515 	/* Make sure VLAN Filters are off */
3516 	rctl &= ~E1000_RCTL_VFE;
3517 
3518 	/* Set up packet buffer size, overridden by per queue srrctl on igb */
3519 	if (hw->mac.type < igb_mac_min) {
3520 		if (sc->rx_mbuf_sz > 2048 && sc->rx_mbuf_sz <= 4096)
3521 			rctl |= E1000_RCTL_SZ_4096 | E1000_RCTL_BSEX;
3522 		else if (sc->rx_mbuf_sz > 4096 && sc->rx_mbuf_sz <= 8192)
3523 			rctl |= E1000_RCTL_SZ_8192 | E1000_RCTL_BSEX;
3524 		else if (sc->rx_mbuf_sz > 8192)
3525 			rctl |= E1000_RCTL_SZ_16384 | E1000_RCTL_BSEX;
3526 		else {
3527 			rctl |= E1000_RCTL_SZ_2048;
3528 			rctl &= ~E1000_RCTL_BSEX;
3529 		}
3530 	} else
3531 		rctl |= E1000_RCTL_SZ_2048;
3532 
3533 	/*
3534 	 * rctl bits 11:10 are as follows
3535 	 * lem: reserved
3536 	 * em: DTYPE
3537 	 * igb: reserved
3538 	 * and should be 00 on all of the above
3539 	 */
3540 	rctl &= ~0x00000C00;
3541 
3542 	/* Write out the settings */
3543 	E1000_WRITE_REG(hw, E1000_RCTL, rctl);
3544 
3545 	return;
3546 }
3547 
3548 static void
3549 em_if_vlan_register(if_ctx_t ctx, u16 vtag)
3550 {
3551 	struct e1000_softc *sc = iflib_get_softc(ctx);
3552 	u32 index, bit;
3553 
3554 	index = (vtag >> 5) & 0x7F;
3555 	bit = vtag & 0x1F;
3556 	sc->shadow_vfta[index] |= (1 << bit);
3557 	++sc->num_vlans;
3558 	em_if_vlan_filter_write(sc);
3559 }
3560 
3561 static void
3562 em_if_vlan_unregister(if_ctx_t ctx, u16 vtag)
3563 {
3564 	struct e1000_softc *sc = iflib_get_softc(ctx);
3565 	u32 index, bit;
3566 
3567 	index = (vtag >> 5) & 0x7F;
3568 	bit = vtag & 0x1F;
3569 	sc->shadow_vfta[index] &= ~(1 << bit);
3570 	--sc->num_vlans;
3571 	em_if_vlan_filter_write(sc);
3572 }
3573 
3574 static bool
3575 em_if_vlan_filter_capable(if_ctx_t ctx)
3576 {
3577 	if_t ifp = iflib_get_ifp(ctx);
3578 
3579 	if ((if_getcapenable(ifp) & IFCAP_VLAN_HWFILTER) &&
3580 	    !em_disable_crc_stripping)
3581 		return (true);
3582 
3583 	return (false);
3584 }
3585 
3586 static bool
3587 em_if_vlan_filter_used(if_ctx_t ctx)
3588 {
3589 	struct e1000_softc *sc = iflib_get_softc(ctx);
3590 
3591 	if (!em_if_vlan_filter_capable(ctx))
3592 		return (false);
3593 
3594 	for (int i = 0; i < EM_VFTA_SIZE; i++)
3595 		if (sc->shadow_vfta[i] != 0)
3596 			return (true);
3597 
3598 	return (false);
3599 }
3600 
3601 static void
3602 em_if_vlan_filter_enable(struct e1000_softc *sc)
3603 {
3604 	struct e1000_hw *hw = &sc->hw;
3605 	u32 reg;
3606 
3607 	reg = E1000_READ_REG(hw, E1000_RCTL);
3608 	reg &= ~E1000_RCTL_CFIEN;
3609 	reg |= E1000_RCTL_VFE;
3610 	E1000_WRITE_REG(hw, E1000_RCTL, reg);
3611 }
3612 
3613 static void
3614 em_if_vlan_filter_disable(struct e1000_softc *sc)
3615 {
3616 	struct e1000_hw *hw = &sc->hw;
3617 	u32 reg;
3618 
3619 	reg = E1000_READ_REG(hw, E1000_RCTL);
3620 	reg &= ~(E1000_RCTL_VFE | E1000_RCTL_CFIEN);
3621 	E1000_WRITE_REG(hw, E1000_RCTL, reg);
3622 }
3623 
3624 static void
3625 em_if_vlan_filter_write(struct e1000_softc *sc)
3626 {
3627 	struct e1000_hw *hw = &sc->hw;
3628 
3629 	if (sc->vf_ifp)
3630 		return;
3631 
3632 	/* Disable interrupts for lem-class devices during the filter change */
3633 	if (hw->mac.type < em_mac_min)
3634 		em_if_intr_disable(sc->ctx);
3635 
3636 	for (int i = 0; i < EM_VFTA_SIZE; i++)
3637 		if (sc->shadow_vfta[i] != 0) {
3638 			/* XXXKB: incomplete VF support, we return early above */
3639 			if (sc->vf_ifp)
3640 				e1000_vfta_set_vf(hw, sc->shadow_vfta[i], true);
3641 			else
3642 				e1000_write_vfta(hw, i, sc->shadow_vfta[i]);
3643 		}
3644 
3645 	/* Re-enable interrupts for lem-class devices */
3646 	if (hw->mac.type < em_mac_min)
3647 		em_if_intr_enable(sc->ctx);
3648 }
3649 
3650 static void
3651 em_setup_vlan_hw_support(if_ctx_t ctx)
3652 {
3653 	struct e1000_softc *sc = iflib_get_softc(ctx);
3654 	struct e1000_hw *hw = &sc->hw;
3655 	if_t ifp = iflib_get_ifp(ctx);
3656 	u32 reg;
3657 
3658 	/* XXXKB: Return early if we are a VF until VF decap and filter management
3659 	 * is ready and tested.
3660 	 */
3661 	if (sc->vf_ifp)
3662 		return;
3663 
3664 	if (if_getcapenable(ifp) & IFCAP_VLAN_HWTAGGING &&
3665 	    !em_disable_crc_stripping) {
3666 		reg = E1000_READ_REG(hw, E1000_CTRL);
3667 		reg |= E1000_CTRL_VME;
3668 		E1000_WRITE_REG(hw, E1000_CTRL, reg);
3669 	} else {
3670 		reg = E1000_READ_REG(hw, E1000_CTRL);
3671 		reg &= ~E1000_CTRL_VME;
3672 		E1000_WRITE_REG(hw, E1000_CTRL, reg);
3673 	}
3674 
3675 	/* If we aren't doing HW filtering, we're done */
3676 	if (!em_if_vlan_filter_capable(ctx))  {
3677 		em_if_vlan_filter_disable(sc);
3678 		return;
3679 	}
3680 
3681 	/*
3682 	 * A soft reset zero's out the VFTA, so
3683 	 * we need to repopulate it now.
3684 	 * We also insert VLAN 0 in the filter list, so we pass VLAN 0 tagged
3685 	 * traffic through. This will write the entire table.
3686 	 */
3687 	em_if_vlan_register(ctx, 0);
3688 
3689 	/* Enable the Filter Table */
3690 	em_if_vlan_filter_enable(sc);
3691 }
3692 
3693 static void
3694 em_if_intr_enable(if_ctx_t ctx)
3695 {
3696 	struct e1000_softc *sc = iflib_get_softc(ctx);
3697 	struct e1000_hw *hw = &sc->hw;
3698 	u32 ims_mask = IMS_ENABLE_MASK;
3699 
3700 	if (sc->intr_type == IFLIB_INTR_MSIX) {
3701 		E1000_WRITE_REG(hw, EM_EIAC, sc->ims);
3702 		ims_mask |= sc->ims;
3703 	}
3704 	E1000_WRITE_REG(hw, E1000_IMS, ims_mask);
3705 	E1000_WRITE_FLUSH(hw);
3706 }
3707 
3708 static void
3709 em_if_intr_disable(if_ctx_t ctx)
3710 {
3711 	struct e1000_softc *sc = iflib_get_softc(ctx);
3712 	struct e1000_hw *hw = &sc->hw;
3713 
3714 	if (sc->intr_type == IFLIB_INTR_MSIX)
3715 		E1000_WRITE_REG(hw, EM_EIAC, 0);
3716 	E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff);
3717 	E1000_WRITE_FLUSH(hw);
3718 }
3719 
3720 static void
3721 igb_if_intr_enable(if_ctx_t ctx)
3722 {
3723 	struct e1000_softc *sc = iflib_get_softc(ctx);
3724 	struct e1000_hw *hw = &sc->hw;
3725 	u32 mask;
3726 
3727 	if (__predict_true(sc->intr_type == IFLIB_INTR_MSIX)) {
3728 		mask = (sc->que_mask | sc->link_mask);
3729 		E1000_WRITE_REG(hw, E1000_EIAC, mask);
3730 		E1000_WRITE_REG(hw, E1000_EIAM, mask);
3731 		E1000_WRITE_REG(hw, E1000_EIMS, mask);
3732 		E1000_WRITE_REG(hw, E1000_IMS, E1000_IMS_LSC);
3733 	} else
3734 		E1000_WRITE_REG(hw, E1000_IMS, IMS_ENABLE_MASK);
3735 	E1000_WRITE_FLUSH(hw);
3736 }
3737 
3738 static void
3739 igb_if_intr_disable(if_ctx_t ctx)
3740 {
3741 	struct e1000_softc *sc = iflib_get_softc(ctx);
3742 	struct e1000_hw *hw = &sc->hw;
3743 
3744 	if (__predict_true(sc->intr_type == IFLIB_INTR_MSIX)) {
3745 		E1000_WRITE_REG(hw, E1000_EIMC, 0xffffffff);
3746 		E1000_WRITE_REG(hw, E1000_EIAC, 0);
3747 	}
3748 	E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff);
3749 	E1000_WRITE_FLUSH(hw);
3750 }
3751 
3752 /*
3753  * Bit of a misnomer, what this really means is
3754  * to enable OS management of the system... aka
3755  * to disable special hardware management features
3756  */
3757 static void
3758 em_init_manageability(struct e1000_softc *sc)
3759 {
3760 	/* A shared code workaround */
3761 #define E1000_82542_MANC2H E1000_MANC2H
3762 	if (sc->has_manage) {
3763 		int manc2h = E1000_READ_REG(&sc->hw, E1000_MANC2H);
3764 		int manc = E1000_READ_REG(&sc->hw, E1000_MANC);
3765 
3766 		/* disable hardware interception of ARP */
3767 		manc &= ~(E1000_MANC_ARP_EN);
3768 
3769 		/* enable receiving management packets to the host */
3770 		manc |= E1000_MANC_EN_MNG2HOST;
3771 #define E1000_MNG2HOST_PORT_623 (1 << 5)
3772 #define E1000_MNG2HOST_PORT_664 (1 << 6)
3773 		manc2h |= E1000_MNG2HOST_PORT_623;
3774 		manc2h |= E1000_MNG2HOST_PORT_664;
3775 		E1000_WRITE_REG(&sc->hw, E1000_MANC2H, manc2h);
3776 		E1000_WRITE_REG(&sc->hw, E1000_MANC, manc);
3777 	}
3778 }
3779 
3780 /*
3781  * Give control back to hardware management
3782  * controller if there is one.
3783  */
3784 static void
3785 em_release_manageability(struct e1000_softc *sc)
3786 {
3787 	if (sc->has_manage) {
3788 		int manc = E1000_READ_REG(&sc->hw, E1000_MANC);
3789 
3790 		/* re-enable hardware interception of ARP */
3791 		manc |= E1000_MANC_ARP_EN;
3792 		manc &= ~E1000_MANC_EN_MNG2HOST;
3793 
3794 		E1000_WRITE_REG(&sc->hw, E1000_MANC, manc);
3795 	}
3796 }
3797 
3798 /*
3799  * em_get_hw_control sets the {CTRL_EXT|FWSM}:DRV_LOAD bit.
3800  * For ASF and Pass Through versions of f/w this means
3801  * that the driver is loaded. For AMT version type f/w
3802  * this means that the network i/f is open.
3803  */
3804 static void
3805 em_get_hw_control(struct e1000_softc *sc)
3806 {
3807 	u32 ctrl_ext, swsm;
3808 
3809 	if (sc->vf_ifp)
3810 		return;
3811 
3812 	if (sc->hw.mac.type == e1000_82573) {
3813 		swsm = E1000_READ_REG(&sc->hw, E1000_SWSM);
3814 		E1000_WRITE_REG(&sc->hw, E1000_SWSM,
3815 		    swsm | E1000_SWSM_DRV_LOAD);
3816 		return;
3817 	}
3818 	/* else */
3819 	ctrl_ext = E1000_READ_REG(&sc->hw, E1000_CTRL_EXT);
3820 	E1000_WRITE_REG(&sc->hw, E1000_CTRL_EXT,
3821 	    ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
3822 }
3823 
3824 /*
3825  * em_release_hw_control resets {CTRL_EXT|FWSM}:DRV_LOAD bit.
3826  * For ASF and Pass Through versions of f/w this means that
3827  * the driver is no longer loaded. For AMT versions of the
3828  * f/w this means that the network i/f is closed.
3829  */
3830 static void
3831 em_release_hw_control(struct e1000_softc *sc)
3832 {
3833 	u32 ctrl_ext, swsm;
3834 
3835 	if (!sc->has_manage)
3836 		return;
3837 
3838 	if (sc->hw.mac.type == e1000_82573) {
3839 		swsm = E1000_READ_REG(&sc->hw, E1000_SWSM);
3840 		E1000_WRITE_REG(&sc->hw, E1000_SWSM,
3841 		    swsm & ~E1000_SWSM_DRV_LOAD);
3842 		return;
3843 	}
3844 	/* else */
3845 	ctrl_ext = E1000_READ_REG(&sc->hw, E1000_CTRL_EXT);
3846 	E1000_WRITE_REG(&sc->hw, E1000_CTRL_EXT,
3847 	    ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
3848 	return;
3849 }
3850 
3851 static int
3852 em_is_valid_ether_addr(u8 *addr)
3853 {
3854 	char zero_addr[6] = { 0, 0, 0, 0, 0, 0 };
3855 
3856 	if ((addr[0] & 1) || (!bcmp(addr, zero_addr, ETHER_ADDR_LEN))) {
3857 		return (false);
3858 	}
3859 
3860 	return (true);
3861 }
3862 
3863 /*
3864 ** Parse the interface capabilities with regard
3865 ** to both system management and wake-on-lan for
3866 ** later use.
3867 */
3868 static void
3869 em_get_wakeup(if_ctx_t ctx)
3870 {
3871 	struct e1000_softc *sc = iflib_get_softc(ctx);
3872 	device_t dev = iflib_get_dev(ctx);
3873 	u16 eeprom_data = 0, device_id, apme_mask;
3874 
3875 	sc->has_manage = e1000_enable_mng_pass_thru(&sc->hw);
3876 	apme_mask = EM_EEPROM_APME;
3877 
3878 	switch (sc->hw.mac.type) {
3879 	case e1000_82542:
3880 	case e1000_82543:
3881 		break;
3882 	case e1000_82544:
3883 		e1000_read_nvm(&sc->hw,
3884 		    NVM_INIT_CONTROL2_REG, 1, &eeprom_data);
3885 		apme_mask = EM_82544_APME;
3886 		break;
3887 	case e1000_82546:
3888 	case e1000_82546_rev_3:
3889 		if (sc->hw.bus.func == 1) {
3890 			e1000_read_nvm(&sc->hw,
3891 			    NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
3892 			break;
3893 		} else
3894 			e1000_read_nvm(&sc->hw,
3895 			    NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
3896 		break;
3897 	case e1000_82573:
3898 	case e1000_82583:
3899 		sc->has_amt = true;
3900 		/* FALLTHROUGH */
3901 	case e1000_82571:
3902 	case e1000_82572:
3903 	case e1000_80003es2lan:
3904 		if (sc->hw.bus.func == 1) {
3905 			e1000_read_nvm(&sc->hw,
3906 			    NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
3907 			break;
3908 		} else
3909 			e1000_read_nvm(&sc->hw,
3910 			    NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
3911 		break;
3912 	case e1000_ich8lan:
3913 	case e1000_ich9lan:
3914 	case e1000_ich10lan:
3915 	case e1000_pchlan:
3916 	case e1000_pch2lan:
3917 	case e1000_pch_lpt:
3918 	case e1000_pch_spt:
3919 	case e1000_82575:	/* listing all igb devices */
3920 	case e1000_82576:
3921 	case e1000_82580:
3922 	case e1000_i350:
3923 	case e1000_i354:
3924 	case e1000_i210:
3925 	case e1000_i211:
3926 	case e1000_vfadapt:
3927 	case e1000_vfadapt_i350:
3928 		apme_mask = E1000_WUC_APME;
3929 		sc->has_amt = true;
3930 		eeprom_data = E1000_READ_REG(&sc->hw, E1000_WUC);
3931 		break;
3932 	default:
3933 		e1000_read_nvm(&sc->hw,
3934 		    NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
3935 		break;
3936 	}
3937 	if (eeprom_data & apme_mask)
3938 		sc->wol = (E1000_WUFC_MAG | E1000_WUFC_MC);
3939 	/*
3940 	 * We have the eeprom settings, now apply the special cases
3941 	 * where the eeprom may be wrong or the board won't support
3942 	 * wake on lan on a particular port
3943 	 */
3944 	device_id = pci_get_device(dev);
3945 	switch (device_id) {
3946 	case E1000_DEV_ID_82546GB_PCIE:
3947 		sc->wol = 0;
3948 		break;
3949 	case E1000_DEV_ID_82546EB_FIBER:
3950 	case E1000_DEV_ID_82546GB_FIBER:
3951 		/* Wake events only supported on port A for dual fiber
3952 		 * regardless of eeprom setting */
3953 		if (E1000_READ_REG(&sc->hw, E1000_STATUS) &
3954 		    E1000_STATUS_FUNC_1)
3955 			sc->wol = 0;
3956 		break;
3957 	case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
3958 		/* if quad port adapter, disable WoL on all but port A */
3959 		if (global_quad_port_a != 0)
3960 			sc->wol = 0;
3961 		/* Reset for multiple quad port adapters */
3962 		if (++global_quad_port_a == 4)
3963 			global_quad_port_a = 0;
3964 		break;
3965 	case E1000_DEV_ID_82571EB_FIBER:
3966 		/* Wake events only supported on port A for dual fiber
3967 		 * regardless of eeprom setting */
3968 		if (E1000_READ_REG(&sc->hw, E1000_STATUS) &
3969 		    E1000_STATUS_FUNC_1)
3970 			sc->wol = 0;
3971 		break;
3972 	case E1000_DEV_ID_82571EB_QUAD_COPPER:
3973 	case E1000_DEV_ID_82571EB_QUAD_FIBER:
3974 	case E1000_DEV_ID_82571EB_QUAD_COPPER_LP:
3975 		/* if quad port adapter, disable WoL on all but port A */
3976 		if (global_quad_port_a != 0)
3977 			sc->wol = 0;
3978 		/* Reset for multiple quad port adapters */
3979 		if (++global_quad_port_a == 4)
3980 			global_quad_port_a = 0;
3981 		break;
3982 	}
3983 	return;
3984 }
3985 
3986 
3987 /*
3988  * Enable PCI Wake On Lan capability
3989  */
3990 static void
3991 em_enable_wakeup(if_ctx_t ctx)
3992 {
3993 	struct e1000_softc *sc = iflib_get_softc(ctx);
3994 	device_t dev = iflib_get_dev(ctx);
3995 	if_t ifp = iflib_get_ifp(ctx);
3996 	int error = 0;
3997 	u32 pmc, ctrl, ctrl_ext, rctl;
3998 	u16 status;
3999 
4000 	if (pci_find_cap(dev, PCIY_PMG, &pmc) != 0)
4001 		return;
4002 
4003 	/*
4004 	 * Determine type of Wakeup: note that wol
4005 	 * is set with all bits on by default.
4006 	 */
4007 	if ((if_getcapenable(ifp) & IFCAP_WOL_MAGIC) == 0)
4008 		sc->wol &= ~E1000_WUFC_MAG;
4009 
4010 	if ((if_getcapenable(ifp) & IFCAP_WOL_UCAST) == 0)
4011 		sc->wol &= ~E1000_WUFC_EX;
4012 
4013 	if ((if_getcapenable(ifp) & IFCAP_WOL_MCAST) == 0)
4014 		sc->wol &= ~E1000_WUFC_MC;
4015 	else {
4016 		rctl = E1000_READ_REG(&sc->hw, E1000_RCTL);
4017 		rctl |= E1000_RCTL_MPE;
4018 		E1000_WRITE_REG(&sc->hw, E1000_RCTL, rctl);
4019 	}
4020 
4021 	if (!(sc->wol & (E1000_WUFC_EX | E1000_WUFC_MAG | E1000_WUFC_MC)))
4022 		goto pme;
4023 
4024 	/* Advertise the wakeup capability */
4025 	ctrl = E1000_READ_REG(&sc->hw, E1000_CTRL);
4026 	ctrl |= (E1000_CTRL_SWDPIN2 | E1000_CTRL_SWDPIN3);
4027 	E1000_WRITE_REG(&sc->hw, E1000_CTRL, ctrl);
4028 
4029 	/* Keep the laser running on Fiber adapters */
4030 	if (sc->hw.phy.media_type == e1000_media_type_fiber ||
4031 	    sc->hw.phy.media_type == e1000_media_type_internal_serdes) {
4032 		ctrl_ext = E1000_READ_REG(&sc->hw, E1000_CTRL_EXT);
4033 		ctrl_ext |= E1000_CTRL_EXT_SDP3_DATA;
4034 		E1000_WRITE_REG(&sc->hw, E1000_CTRL_EXT, ctrl_ext);
4035 	}
4036 
4037 	if ((sc->hw.mac.type == e1000_ich8lan) ||
4038 	    (sc->hw.mac.type == e1000_pchlan) ||
4039 	    (sc->hw.mac.type == e1000_ich9lan) ||
4040 	    (sc->hw.mac.type == e1000_ich10lan))
4041 		e1000_suspend_workarounds_ich8lan(&sc->hw);
4042 
4043 	if ( sc->hw.mac.type >= e1000_pchlan) {
4044 		error = em_enable_phy_wakeup(sc);
4045 		if (error)
4046 			goto pme;
4047 	} else {
4048 		/* Enable wakeup by the MAC */
4049 		E1000_WRITE_REG(&sc->hw, E1000_WUC, E1000_WUC_PME_EN);
4050 		E1000_WRITE_REG(&sc->hw, E1000_WUFC, sc->wol);
4051 	}
4052 
4053 	if (sc->hw.phy.type == e1000_phy_igp_3)
4054 		e1000_igp3_phy_powerdown_workaround_ich8lan(&sc->hw);
4055 
4056 pme:
4057 	status = pci_read_config(dev, pmc + PCIR_POWER_STATUS, 2);
4058 	status &= ~(PCIM_PSTAT_PME | PCIM_PSTAT_PMEENABLE);
4059 	if (!error && (if_getcapenable(ifp) & IFCAP_WOL))
4060 		status |= PCIM_PSTAT_PME | PCIM_PSTAT_PMEENABLE;
4061 	pci_write_config(dev, pmc + PCIR_POWER_STATUS, status, 2);
4062 
4063 	return;
4064 }
4065 
4066 /*
4067  * WOL in the newer chipset interfaces (pchlan)
4068  * require thing to be copied into the phy
4069  */
4070 static int
4071 em_enable_phy_wakeup(struct e1000_softc *sc)
4072 {
4073 	struct e1000_hw *hw = &sc->hw;
4074 	u32 mreg, ret = 0;
4075 	u16 preg;
4076 
4077 	/* copy MAC RARs to PHY RARs */
4078 	e1000_copy_rx_addrs_to_phy_ich8lan(hw);
4079 
4080 	/* copy MAC MTA to PHY MTA */
4081 	for (int i = 0; i < hw->mac.mta_reg_count; i++) {
4082 		mreg = E1000_READ_REG_ARRAY(hw, E1000_MTA, i);
4083 		e1000_write_phy_reg(hw, BM_MTA(i), (u16)(mreg & 0xFFFF));
4084 		e1000_write_phy_reg(hw, BM_MTA(i) + 1,
4085 		    (u16)((mreg >> 16) & 0xFFFF));
4086 	}
4087 
4088 	/* configure PHY Rx Control register */
4089 	e1000_read_phy_reg(hw, BM_RCTL, &preg);
4090 	mreg = E1000_READ_REG(hw, E1000_RCTL);
4091 	if (mreg & E1000_RCTL_UPE)
4092 		preg |= BM_RCTL_UPE;
4093 	if (mreg & E1000_RCTL_MPE)
4094 		preg |= BM_RCTL_MPE;
4095 	preg &= ~(BM_RCTL_MO_MASK);
4096 	if (mreg & E1000_RCTL_MO_3)
4097 		preg |= (((mreg & E1000_RCTL_MO_3) >> E1000_RCTL_MO_SHIFT)
4098 				<< BM_RCTL_MO_SHIFT);
4099 	if (mreg & E1000_RCTL_BAM)
4100 		preg |= BM_RCTL_BAM;
4101 	if (mreg & E1000_RCTL_PMCF)
4102 		preg |= BM_RCTL_PMCF;
4103 	mreg = E1000_READ_REG(hw, E1000_CTRL);
4104 	if (mreg & E1000_CTRL_RFCE)
4105 		preg |= BM_RCTL_RFCE;
4106 	e1000_write_phy_reg(hw, BM_RCTL, preg);
4107 
4108 	/* enable PHY wakeup in MAC register */
4109 	E1000_WRITE_REG(hw, E1000_WUC,
4110 	    E1000_WUC_PHY_WAKE | E1000_WUC_PME_EN | E1000_WUC_APME);
4111 	E1000_WRITE_REG(hw, E1000_WUFC, sc->wol);
4112 
4113 	/* configure and enable PHY wakeup in PHY registers */
4114 	e1000_write_phy_reg(hw, BM_WUFC, sc->wol);
4115 	e1000_write_phy_reg(hw, BM_WUC, E1000_WUC_PME_EN);
4116 
4117 	/* activate PHY wakeup */
4118 	ret = hw->phy.ops.acquire(hw);
4119 	if (ret) {
4120 		printf("Could not acquire PHY\n");
4121 		return ret;
4122 	}
4123 	e1000_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
4124 	                         (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
4125 	ret = e1000_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, &preg);
4126 	if (ret) {
4127 		printf("Could not read PHY page 769\n");
4128 		goto out;
4129 	}
4130 	preg |= BM_WUC_ENABLE_BIT | BM_WUC_HOST_WU_BIT;
4131 	ret = e1000_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, preg);
4132 	if (ret)
4133 		printf("Could not set PHY Host Wakeup bit\n");
4134 out:
4135 	hw->phy.ops.release(hw);
4136 
4137 	return ret;
4138 }
4139 
4140 static void
4141 em_if_led_func(if_ctx_t ctx, int onoff)
4142 {
4143 	struct e1000_softc *sc = iflib_get_softc(ctx);
4144 
4145 	if (onoff) {
4146 		e1000_setup_led(&sc->hw);
4147 		e1000_led_on(&sc->hw);
4148 	} else {
4149 		e1000_led_off(&sc->hw);
4150 		e1000_cleanup_led(&sc->hw);
4151 	}
4152 }
4153 
4154 /*
4155  * Disable the L0S and L1 LINK states
4156  */
4157 static void
4158 em_disable_aspm(struct e1000_softc *sc)
4159 {
4160 	int base, reg;
4161 	u16 link_cap,link_ctrl;
4162 	device_t dev = sc->dev;
4163 
4164 	switch (sc->hw.mac.type) {
4165 	case e1000_82573:
4166 	case e1000_82574:
4167 	case e1000_82583:
4168 		break;
4169 	default:
4170 		return;
4171 	}
4172 	if (pci_find_cap(dev, PCIY_EXPRESS, &base) != 0)
4173 		return;
4174 	reg = base + PCIER_LINK_CAP;
4175 	link_cap = pci_read_config(dev, reg, 2);
4176 	if ((link_cap & PCIEM_LINK_CAP_ASPM) == 0)
4177 		return;
4178 	reg = base + PCIER_LINK_CTL;
4179 	link_ctrl = pci_read_config(dev, reg, 2);
4180 	link_ctrl &= ~PCIEM_LINK_CTL_ASPMC;
4181 	pci_write_config(dev, reg, link_ctrl, 2);
4182 	return;
4183 }
4184 
4185 /**********************************************************************
4186  *
4187  *  Update the board statistics counters.
4188  *
4189  **********************************************************************/
4190 static void
4191 em_update_stats_counters(struct e1000_softc *sc)
4192 {
4193 	u64 prev_xoffrxc = sc->stats.xoffrxc;
4194 
4195 	if(sc->hw.phy.media_type == e1000_media_type_copper ||
4196 	   (E1000_READ_REG(&sc->hw, E1000_STATUS) & E1000_STATUS_LU)) {
4197 		sc->stats.symerrs += E1000_READ_REG(&sc->hw, E1000_SYMERRS);
4198 		sc->stats.sec += E1000_READ_REG(&sc->hw, E1000_SEC);
4199 	}
4200 	sc->stats.crcerrs += E1000_READ_REG(&sc->hw, E1000_CRCERRS);
4201 	sc->stats.mpc += E1000_READ_REG(&sc->hw, E1000_MPC);
4202 	sc->stats.scc += E1000_READ_REG(&sc->hw, E1000_SCC);
4203 	sc->stats.ecol += E1000_READ_REG(&sc->hw, E1000_ECOL);
4204 
4205 	sc->stats.mcc += E1000_READ_REG(&sc->hw, E1000_MCC);
4206 	sc->stats.latecol += E1000_READ_REG(&sc->hw, E1000_LATECOL);
4207 	sc->stats.colc += E1000_READ_REG(&sc->hw, E1000_COLC);
4208 	sc->stats.dc += E1000_READ_REG(&sc->hw, E1000_DC);
4209 	sc->stats.rlec += E1000_READ_REG(&sc->hw, E1000_RLEC);
4210 	sc->stats.xonrxc += E1000_READ_REG(&sc->hw, E1000_XONRXC);
4211 	sc->stats.xontxc += E1000_READ_REG(&sc->hw, E1000_XONTXC);
4212 	sc->stats.xoffrxc += E1000_READ_REG(&sc->hw, E1000_XOFFRXC);
4213 	/*
4214 	 ** For watchdog management we need to know if we have been
4215 	 ** paused during the last interval, so capture that here.
4216 	*/
4217 	if (sc->stats.xoffrxc != prev_xoffrxc)
4218 		sc->shared->isc_pause_frames = 1;
4219 	sc->stats.xofftxc += E1000_READ_REG(&sc->hw, E1000_XOFFTXC);
4220 	sc->stats.fcruc += E1000_READ_REG(&sc->hw, E1000_FCRUC);
4221 	sc->stats.prc64 += E1000_READ_REG(&sc->hw, E1000_PRC64);
4222 	sc->stats.prc127 += E1000_READ_REG(&sc->hw, E1000_PRC127);
4223 	sc->stats.prc255 += E1000_READ_REG(&sc->hw, E1000_PRC255);
4224 	sc->stats.prc511 += E1000_READ_REG(&sc->hw, E1000_PRC511);
4225 	sc->stats.prc1023 += E1000_READ_REG(&sc->hw, E1000_PRC1023);
4226 	sc->stats.prc1522 += E1000_READ_REG(&sc->hw, E1000_PRC1522);
4227 	sc->stats.gprc += E1000_READ_REG(&sc->hw, E1000_GPRC);
4228 	sc->stats.bprc += E1000_READ_REG(&sc->hw, E1000_BPRC);
4229 	sc->stats.mprc += E1000_READ_REG(&sc->hw, E1000_MPRC);
4230 	sc->stats.gptc += E1000_READ_REG(&sc->hw, E1000_GPTC);
4231 
4232 	/* For the 64-bit byte counters the low dword must be read first. */
4233 	/* Both registers clear on the read of the high dword */
4234 
4235 	sc->stats.gorc += E1000_READ_REG(&sc->hw, E1000_GORCL) +
4236 	    ((u64)E1000_READ_REG(&sc->hw, E1000_GORCH) << 32);
4237 	sc->stats.gotc += E1000_READ_REG(&sc->hw, E1000_GOTCL) +
4238 	    ((u64)E1000_READ_REG(&sc->hw, E1000_GOTCH) << 32);
4239 
4240 	sc->stats.rnbc += E1000_READ_REG(&sc->hw, E1000_RNBC);
4241 	sc->stats.ruc += E1000_READ_REG(&sc->hw, E1000_RUC);
4242 	sc->stats.rfc += E1000_READ_REG(&sc->hw, E1000_RFC);
4243 	sc->stats.roc += E1000_READ_REG(&sc->hw, E1000_ROC);
4244 	sc->stats.rjc += E1000_READ_REG(&sc->hw, E1000_RJC);
4245 
4246 	sc->stats.tor += E1000_READ_REG(&sc->hw, E1000_TORH);
4247 	sc->stats.tot += E1000_READ_REG(&sc->hw, E1000_TOTH);
4248 
4249 	sc->stats.tpr += E1000_READ_REG(&sc->hw, E1000_TPR);
4250 	sc->stats.tpt += E1000_READ_REG(&sc->hw, E1000_TPT);
4251 	sc->stats.ptc64 += E1000_READ_REG(&sc->hw, E1000_PTC64);
4252 	sc->stats.ptc127 += E1000_READ_REG(&sc->hw, E1000_PTC127);
4253 	sc->stats.ptc255 += E1000_READ_REG(&sc->hw, E1000_PTC255);
4254 	sc->stats.ptc511 += E1000_READ_REG(&sc->hw, E1000_PTC511);
4255 	sc->stats.ptc1023 += E1000_READ_REG(&sc->hw, E1000_PTC1023);
4256 	sc->stats.ptc1522 += E1000_READ_REG(&sc->hw, E1000_PTC1522);
4257 	sc->stats.mptc += E1000_READ_REG(&sc->hw, E1000_MPTC);
4258 	sc->stats.bptc += E1000_READ_REG(&sc->hw, E1000_BPTC);
4259 
4260 	/* Interrupt Counts */
4261 
4262 	sc->stats.iac += E1000_READ_REG(&sc->hw, E1000_IAC);
4263 	sc->stats.icrxptc += E1000_READ_REG(&sc->hw, E1000_ICRXPTC);
4264 	sc->stats.icrxatc += E1000_READ_REG(&sc->hw, E1000_ICRXATC);
4265 	sc->stats.ictxptc += E1000_READ_REG(&sc->hw, E1000_ICTXPTC);
4266 	sc->stats.ictxatc += E1000_READ_REG(&sc->hw, E1000_ICTXATC);
4267 	sc->stats.ictxqec += E1000_READ_REG(&sc->hw, E1000_ICTXQEC);
4268 	sc->stats.ictxqmtc += E1000_READ_REG(&sc->hw, E1000_ICTXQMTC);
4269 	sc->stats.icrxdmtc += E1000_READ_REG(&sc->hw, E1000_ICRXDMTC);
4270 	sc->stats.icrxoc += E1000_READ_REG(&sc->hw, E1000_ICRXOC);
4271 
4272 	if (sc->hw.mac.type >= e1000_82543) {
4273 		sc->stats.algnerrc +=
4274 		E1000_READ_REG(&sc->hw, E1000_ALGNERRC);
4275 		sc->stats.rxerrc +=
4276 		E1000_READ_REG(&sc->hw, E1000_RXERRC);
4277 		sc->stats.tncrs +=
4278 		E1000_READ_REG(&sc->hw, E1000_TNCRS);
4279 		sc->stats.cexterr +=
4280 		E1000_READ_REG(&sc->hw, E1000_CEXTERR);
4281 		sc->stats.tsctc +=
4282 		E1000_READ_REG(&sc->hw, E1000_TSCTC);
4283 		sc->stats.tsctfc +=
4284 		E1000_READ_REG(&sc->hw, E1000_TSCTFC);
4285 	}
4286 }
4287 
4288 static uint64_t
4289 em_if_get_counter(if_ctx_t ctx, ift_counter cnt)
4290 {
4291 	struct e1000_softc *sc = iflib_get_softc(ctx);
4292 	if_t ifp = iflib_get_ifp(ctx);
4293 
4294 	switch (cnt) {
4295 	case IFCOUNTER_COLLISIONS:
4296 		return (sc->stats.colc);
4297 	case IFCOUNTER_IERRORS:
4298 		return (sc->dropped_pkts + sc->stats.rxerrc +
4299 		    sc->stats.crcerrs + sc->stats.algnerrc +
4300 		    sc->stats.ruc + sc->stats.roc +
4301 		    sc->stats.mpc + sc->stats.cexterr);
4302 	case IFCOUNTER_OERRORS:
4303 		return (sc->stats.ecol + sc->stats.latecol +
4304 		    sc->watchdog_events);
4305 	default:
4306 		return (if_get_counter_default(ifp, cnt));
4307 	}
4308 }
4309 
4310 /* em_if_needs_restart - Tell iflib when the driver needs to be reinitialized
4311  * @ctx: iflib context
4312  * @event: event code to check
4313  *
4314  * Defaults to returning true for unknown events.
4315  *
4316  * @returns true if iflib needs to reinit the interface
4317  */
4318 static bool
4319 em_if_needs_restart(if_ctx_t ctx __unused, enum iflib_restart_event event)
4320 {
4321 	switch (event) {
4322 	case IFLIB_RESTART_VLAN_CONFIG:
4323 		return (false);
4324 	default:
4325 		return (true);
4326 	}
4327 }
4328 
4329 /* Export a single 32-bit register via a read-only sysctl. */
4330 static int
4331 em_sysctl_reg_handler(SYSCTL_HANDLER_ARGS)
4332 {
4333 	struct e1000_softc *sc;
4334 	u_int val;
4335 
4336 	sc = oidp->oid_arg1;
4337 	val = E1000_READ_REG(&sc->hw, oidp->oid_arg2);
4338 	return (sysctl_handle_int(oidp, &val, 0, req));
4339 }
4340 
4341 /*
4342  * Add sysctl variables, one per statistic, to the system.
4343  */
4344 static void
4345 em_add_hw_stats(struct e1000_softc *sc)
4346 {
4347 	device_t dev = iflib_get_dev(sc->ctx);
4348 	struct em_tx_queue *tx_que = sc->tx_queues;
4349 	struct em_rx_queue *rx_que = sc->rx_queues;
4350 
4351 	struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(dev);
4352 	struct sysctl_oid *tree = device_get_sysctl_tree(dev);
4353 	struct sysctl_oid_list *child = SYSCTL_CHILDREN(tree);
4354 	struct e1000_hw_stats *stats = &sc->stats;
4355 
4356 	struct sysctl_oid *stat_node, *queue_node, *int_node;
4357 	struct sysctl_oid_list *stat_list, *queue_list, *int_list;
4358 
4359 #define QUEUE_NAME_LEN 32
4360 	char namebuf[QUEUE_NAME_LEN];
4361 
4362 	/* Driver Statistics */
4363 	SYSCTL_ADD_ULONG(ctx, child, OID_AUTO, "dropped",
4364 			CTLFLAG_RD, &sc->dropped_pkts,
4365 			"Driver dropped packets");
4366 	SYSCTL_ADD_ULONG(ctx, child, OID_AUTO, "link_irq",
4367 			CTLFLAG_RD, &sc->link_irq,
4368 			"Link MSI-X IRQ Handled");
4369 	SYSCTL_ADD_ULONG(ctx, child, OID_AUTO, "rx_overruns",
4370 			CTLFLAG_RD, &sc->rx_overruns,
4371 			"RX overruns");
4372 	SYSCTL_ADD_ULONG(ctx, child, OID_AUTO, "watchdog_timeouts",
4373 			CTLFLAG_RD, &sc->watchdog_events,
4374 			"Watchdog timeouts");
4375 	SYSCTL_ADD_PROC(ctx, child, OID_AUTO, "device_control",
4376 	    CTLTYPE_UINT | CTLFLAG_RD | CTLFLAG_NEEDGIANT,
4377 	    sc, E1000_CTRL, em_sysctl_reg_handler, "IU",
4378 	    "Device Control Register");
4379 	SYSCTL_ADD_PROC(ctx, child, OID_AUTO, "rx_control",
4380 	    CTLTYPE_UINT | CTLFLAG_RD | CTLFLAG_NEEDGIANT,
4381 	    sc, E1000_RCTL, em_sysctl_reg_handler, "IU",
4382 	    "Receiver Control Register");
4383 	SYSCTL_ADD_UINT(ctx, child, OID_AUTO, "fc_high_water",
4384 			CTLFLAG_RD, &sc->hw.fc.high_water, 0,
4385 			"Flow Control High Watermark");
4386 	SYSCTL_ADD_UINT(ctx, child, OID_AUTO, "fc_low_water",
4387 			CTLFLAG_RD, &sc->hw.fc.low_water, 0,
4388 			"Flow Control Low Watermark");
4389 
4390 	for (int i = 0; i < sc->tx_num_queues; i++, tx_que++) {
4391 		struct tx_ring *txr = &tx_que->txr;
4392 		snprintf(namebuf, QUEUE_NAME_LEN, "queue_tx_%d", i);
4393 		queue_node = SYSCTL_ADD_NODE(ctx, child, OID_AUTO, namebuf,
4394 		    CTLFLAG_RD | CTLFLAG_MPSAFE, NULL, "TX Queue Name");
4395 		queue_list = SYSCTL_CHILDREN(queue_node);
4396 
4397 		SYSCTL_ADD_PROC(ctx, queue_list, OID_AUTO, "txd_head",
4398 		    CTLTYPE_UINT | CTLFLAG_RD | CTLFLAG_NEEDGIANT, sc,
4399 		    E1000_TDH(txr->me), em_sysctl_reg_handler, "IU",
4400 		    "Transmit Descriptor Head");
4401 		SYSCTL_ADD_PROC(ctx, queue_list, OID_AUTO, "txd_tail",
4402 		    CTLTYPE_UINT | CTLFLAG_RD | CTLFLAG_NEEDGIANT, sc,
4403 		    E1000_TDT(txr->me), em_sysctl_reg_handler, "IU",
4404 		    "Transmit Descriptor Tail");
4405 		SYSCTL_ADD_ULONG(ctx, queue_list, OID_AUTO, "tx_irq",
4406 				CTLFLAG_RD, &txr->tx_irq,
4407 				"Queue MSI-X Transmit Interrupts");
4408 	}
4409 
4410 	for (int j = 0; j < sc->rx_num_queues; j++, rx_que++) {
4411 		struct rx_ring *rxr = &rx_que->rxr;
4412 		snprintf(namebuf, QUEUE_NAME_LEN, "queue_rx_%d", j);
4413 		queue_node = SYSCTL_ADD_NODE(ctx, child, OID_AUTO, namebuf,
4414 		    CTLFLAG_RD | CTLFLAG_MPSAFE, NULL, "RX Queue Name");
4415 		queue_list = SYSCTL_CHILDREN(queue_node);
4416 
4417 		SYSCTL_ADD_PROC(ctx, queue_list, OID_AUTO, "rxd_head",
4418 		    CTLTYPE_UINT | CTLFLAG_RD | CTLFLAG_NEEDGIANT, sc,
4419 		    E1000_RDH(rxr->me), em_sysctl_reg_handler, "IU",
4420 		    "Receive Descriptor Head");
4421 		SYSCTL_ADD_PROC(ctx, queue_list, OID_AUTO, "rxd_tail",
4422 		    CTLTYPE_UINT | CTLFLAG_RD | CTLFLAG_NEEDGIANT, sc,
4423 		    E1000_RDT(rxr->me), em_sysctl_reg_handler, "IU",
4424 		    "Receive Descriptor Tail");
4425 		SYSCTL_ADD_ULONG(ctx, queue_list, OID_AUTO, "rx_irq",
4426 				CTLFLAG_RD, &rxr->rx_irq,
4427 				"Queue MSI-X Receive Interrupts");
4428 	}
4429 
4430 	/* MAC stats get their own sub node */
4431 
4432 	stat_node = SYSCTL_ADD_NODE(ctx, child, OID_AUTO, "mac_stats",
4433 	    CTLFLAG_RD | CTLFLAG_MPSAFE, NULL, "Statistics");
4434 	stat_list = SYSCTL_CHILDREN(stat_node);
4435 
4436 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "excess_coll",
4437 			CTLFLAG_RD, &stats->ecol,
4438 			"Excessive collisions");
4439 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "single_coll",
4440 			CTLFLAG_RD, &stats->scc,
4441 			"Single collisions");
4442 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "multiple_coll",
4443 			CTLFLAG_RD, &stats->mcc,
4444 			"Multiple collisions");
4445 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "late_coll",
4446 			CTLFLAG_RD, &stats->latecol,
4447 			"Late collisions");
4448 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "collision_count",
4449 			CTLFLAG_RD, &stats->colc,
4450 			"Collision Count");
4451 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "symbol_errors",
4452 			CTLFLAG_RD, &sc->stats.symerrs,
4453 			"Symbol Errors");
4454 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "sequence_errors",
4455 			CTLFLAG_RD, &sc->stats.sec,
4456 			"Sequence Errors");
4457 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "defer_count",
4458 			CTLFLAG_RD, &sc->stats.dc,
4459 			"Defer Count");
4460 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "missed_packets",
4461 			CTLFLAG_RD, &sc->stats.mpc,
4462 			"Missed Packets");
4463 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "recv_no_buff",
4464 			CTLFLAG_RD, &sc->stats.rnbc,
4465 			"Receive No Buffers");
4466 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "recv_undersize",
4467 			CTLFLAG_RD, &sc->stats.ruc,
4468 			"Receive Undersize");
4469 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "recv_fragmented",
4470 			CTLFLAG_RD, &sc->stats.rfc,
4471 			"Fragmented Packets Received ");
4472 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "recv_oversize",
4473 			CTLFLAG_RD, &sc->stats.roc,
4474 			"Oversized Packets Received");
4475 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "recv_jabber",
4476 			CTLFLAG_RD, &sc->stats.rjc,
4477 			"Recevied Jabber");
4478 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "recv_errs",
4479 			CTLFLAG_RD, &sc->stats.rxerrc,
4480 			"Receive Errors");
4481 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "crc_errs",
4482 			CTLFLAG_RD, &sc->stats.crcerrs,
4483 			"CRC errors");
4484 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "alignment_errs",
4485 			CTLFLAG_RD, &sc->stats.algnerrc,
4486 			"Alignment Errors");
4487 	/* On 82575 these are collision counts */
4488 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "coll_ext_errs",
4489 			CTLFLAG_RD, &sc->stats.cexterr,
4490 			"Collision/Carrier extension errors");
4491 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "xon_recvd",
4492 			CTLFLAG_RD, &sc->stats.xonrxc,
4493 			"XON Received");
4494 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "xon_txd",
4495 			CTLFLAG_RD, &sc->stats.xontxc,
4496 			"XON Transmitted");
4497 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "xoff_recvd",
4498 			CTLFLAG_RD, &sc->stats.xoffrxc,
4499 			"XOFF Received");
4500 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "xoff_txd",
4501 			CTLFLAG_RD, &sc->stats.xofftxc,
4502 			"XOFF Transmitted");
4503 
4504 	/* Packet Reception Stats */
4505 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "total_pkts_recvd",
4506 			CTLFLAG_RD, &sc->stats.tpr,
4507 			"Total Packets Received ");
4508 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "good_pkts_recvd",
4509 			CTLFLAG_RD, &sc->stats.gprc,
4510 			"Good Packets Received");
4511 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "bcast_pkts_recvd",
4512 			CTLFLAG_RD, &sc->stats.bprc,
4513 			"Broadcast Packets Received");
4514 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "mcast_pkts_recvd",
4515 			CTLFLAG_RD, &sc->stats.mprc,
4516 			"Multicast Packets Received");
4517 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "rx_frames_64",
4518 			CTLFLAG_RD, &sc->stats.prc64,
4519 			"64 byte frames received ");
4520 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "rx_frames_65_127",
4521 			CTLFLAG_RD, &sc->stats.prc127,
4522 			"65-127 byte frames received");
4523 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "rx_frames_128_255",
4524 			CTLFLAG_RD, &sc->stats.prc255,
4525 			"128-255 byte frames received");
4526 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "rx_frames_256_511",
4527 			CTLFLAG_RD, &sc->stats.prc511,
4528 			"256-511 byte frames received");
4529 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "rx_frames_512_1023",
4530 			CTLFLAG_RD, &sc->stats.prc1023,
4531 			"512-1023 byte frames received");
4532 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "rx_frames_1024_1522",
4533 			CTLFLAG_RD, &sc->stats.prc1522,
4534 			"1023-1522 byte frames received");
4535 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "good_octets_recvd",
4536 			CTLFLAG_RD, &sc->stats.gorc,
4537 			"Good Octets Received");
4538 
4539 	/* Packet Transmission Stats */
4540 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "good_octets_txd",
4541 			CTLFLAG_RD, &sc->stats.gotc,
4542 			"Good Octets Transmitted");
4543 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "total_pkts_txd",
4544 			CTLFLAG_RD, &sc->stats.tpt,
4545 			"Total Packets Transmitted");
4546 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "good_pkts_txd",
4547 			CTLFLAG_RD, &sc->stats.gptc,
4548 			"Good Packets Transmitted");
4549 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "bcast_pkts_txd",
4550 			CTLFLAG_RD, &sc->stats.bptc,
4551 			"Broadcast Packets Transmitted");
4552 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "mcast_pkts_txd",
4553 			CTLFLAG_RD, &sc->stats.mptc,
4554 			"Multicast Packets Transmitted");
4555 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "tx_frames_64",
4556 			CTLFLAG_RD, &sc->stats.ptc64,
4557 			"64 byte frames transmitted ");
4558 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "tx_frames_65_127",
4559 			CTLFLAG_RD, &sc->stats.ptc127,
4560 			"65-127 byte frames transmitted");
4561 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "tx_frames_128_255",
4562 			CTLFLAG_RD, &sc->stats.ptc255,
4563 			"128-255 byte frames transmitted");
4564 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "tx_frames_256_511",
4565 			CTLFLAG_RD, &sc->stats.ptc511,
4566 			"256-511 byte frames transmitted");
4567 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "tx_frames_512_1023",
4568 			CTLFLAG_RD, &sc->stats.ptc1023,
4569 			"512-1023 byte frames transmitted");
4570 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "tx_frames_1024_1522",
4571 			CTLFLAG_RD, &sc->stats.ptc1522,
4572 			"1024-1522 byte frames transmitted");
4573 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "tso_txd",
4574 			CTLFLAG_RD, &sc->stats.tsctc,
4575 			"TSO Contexts Transmitted");
4576 	SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "tso_ctx_fail",
4577 			CTLFLAG_RD, &sc->stats.tsctfc,
4578 			"TSO Contexts Failed");
4579 
4580 
4581 	/* Interrupt Stats */
4582 
4583 	int_node = SYSCTL_ADD_NODE(ctx, child, OID_AUTO, "interrupts",
4584 	    CTLFLAG_RD | CTLFLAG_MPSAFE, NULL, "Interrupt Statistics");
4585 	int_list = SYSCTL_CHILDREN(int_node);
4586 
4587 	SYSCTL_ADD_UQUAD(ctx, int_list, OID_AUTO, "asserts",
4588 			CTLFLAG_RD, &sc->stats.iac,
4589 			"Interrupt Assertion Count");
4590 
4591 	SYSCTL_ADD_UQUAD(ctx, int_list, OID_AUTO, "rx_pkt_timer",
4592 			CTLFLAG_RD, &sc->stats.icrxptc,
4593 			"Interrupt Cause Rx Pkt Timer Expire Count");
4594 
4595 	SYSCTL_ADD_UQUAD(ctx, int_list, OID_AUTO, "rx_abs_timer",
4596 			CTLFLAG_RD, &sc->stats.icrxatc,
4597 			"Interrupt Cause Rx Abs Timer Expire Count");
4598 
4599 	SYSCTL_ADD_UQUAD(ctx, int_list, OID_AUTO, "tx_pkt_timer",
4600 			CTLFLAG_RD, &sc->stats.ictxptc,
4601 			"Interrupt Cause Tx Pkt Timer Expire Count");
4602 
4603 	SYSCTL_ADD_UQUAD(ctx, int_list, OID_AUTO, "tx_abs_timer",
4604 			CTLFLAG_RD, &sc->stats.ictxatc,
4605 			"Interrupt Cause Tx Abs Timer Expire Count");
4606 
4607 	SYSCTL_ADD_UQUAD(ctx, int_list, OID_AUTO, "tx_queue_empty",
4608 			CTLFLAG_RD, &sc->stats.ictxqec,
4609 			"Interrupt Cause Tx Queue Empty Count");
4610 
4611 	SYSCTL_ADD_UQUAD(ctx, int_list, OID_AUTO, "tx_queue_min_thresh",
4612 			CTLFLAG_RD, &sc->stats.ictxqmtc,
4613 			"Interrupt Cause Tx Queue Min Thresh Count");
4614 
4615 	SYSCTL_ADD_UQUAD(ctx, int_list, OID_AUTO, "rx_desc_min_thresh",
4616 			CTLFLAG_RD, &sc->stats.icrxdmtc,
4617 			"Interrupt Cause Rx Desc Min Thresh Count");
4618 
4619 	SYSCTL_ADD_UQUAD(ctx, int_list, OID_AUTO, "rx_overrun",
4620 			CTLFLAG_RD, &sc->stats.icrxoc,
4621 			"Interrupt Cause Receiver Overrun Count");
4622 }
4623 
4624 static void
4625 em_fw_version_locked(if_ctx_t ctx)
4626 {
4627 	struct e1000_softc *sc = iflib_get_softc(ctx);
4628 	struct e1000_hw *hw = &sc->hw;
4629 	struct e1000_fw_version *fw_ver = &sc->fw_ver;
4630 	uint16_t eep = 0;
4631 
4632 	/*
4633 	 * em_fw_version_locked() must run under the IFLIB_CTX_LOCK to meet the
4634 	 * NVM locking model, so we do it in em_if_attach_pre() and store the
4635 	 * info in the softc
4636 	 */
4637 	ASSERT_CTX_LOCK_HELD(hw);
4638 
4639 	*fw_ver = (struct e1000_fw_version){0};
4640 
4641 	if (hw->mac.type >= igb_mac_min) {
4642 		/*
4643 		 * Use the Shared Code for igb(4)
4644 		 */
4645 		e1000_get_fw_version(hw, fw_ver);
4646 	} else {
4647 		/*
4648 		 * Otherwise, EEPROM version should be present on (almost?) all
4649 		 * devices here
4650 		 */
4651 		if(e1000_read_nvm(hw, NVM_VERSION, 1, &eep)) {
4652 			INIT_DEBUGOUT("can't get EEPROM version");
4653 			return;
4654 		}
4655 
4656 		fw_ver->eep_major = (eep & NVM_MAJOR_MASK) >> NVM_MAJOR_SHIFT;
4657 		fw_ver->eep_minor = (eep & NVM_MINOR_MASK) >> NVM_MINOR_SHIFT;
4658 		fw_ver->eep_build = (eep & NVM_IMAGE_ID_MASK);
4659 	}
4660 }
4661 
4662 static void
4663 em_sbuf_fw_version(struct e1000_fw_version *fw_ver, struct sbuf *buf)
4664 {
4665 	const char *space = "";
4666 
4667 	if (fw_ver->eep_major || fw_ver->eep_minor || fw_ver->eep_build) {
4668 		sbuf_printf(buf, "EEPROM V%d.%d-%d", fw_ver->eep_major,
4669 			    fw_ver->eep_minor, fw_ver->eep_build);
4670 		space = " ";
4671 	}
4672 
4673 	if (fw_ver->invm_major || fw_ver->invm_minor || fw_ver->invm_img_type) {
4674 		sbuf_printf(buf, "%sNVM V%d.%d imgtype%d",
4675 			    space, fw_ver->invm_major, fw_ver->invm_minor,
4676 			    fw_ver->invm_img_type);
4677 		space = " ";
4678 	}
4679 
4680 	if (fw_ver->or_valid) {
4681 		sbuf_printf(buf, "%sOption ROM V%d-b%d-p%d",
4682 			    space, fw_ver->or_major, fw_ver->or_build,
4683 			    fw_ver->or_patch);
4684 		space = " ";
4685 	}
4686 
4687 	if (fw_ver->etrack_id)
4688 		sbuf_printf(buf, "%seTrack 0x%08x", space, fw_ver->etrack_id);
4689 }
4690 
4691 static void
4692 em_print_fw_version(struct e1000_softc *sc )
4693 {
4694 	device_t dev = sc->dev;
4695 	struct sbuf *buf;
4696 	int error = 0;
4697 
4698 	buf = sbuf_new_auto();
4699 	if (!buf) {
4700 		device_printf(dev, "Could not allocate sbuf for output.\n");
4701 		return;
4702 	}
4703 
4704 	em_sbuf_fw_version(&sc->fw_ver, buf);
4705 
4706 	error = sbuf_finish(buf);
4707 	if (error)
4708 		device_printf(dev, "Error finishing sbuf: %d\n", error);
4709 	else if (sbuf_len(buf))
4710 		device_printf(dev, "%s\n", sbuf_data(buf));
4711 
4712 	sbuf_delete(buf);
4713 }
4714 
4715 static int
4716 em_sysctl_print_fw_version(SYSCTL_HANDLER_ARGS)
4717 {
4718 	struct e1000_softc *sc = (struct e1000_softc *)arg1;
4719 	device_t dev = sc->dev;
4720 	struct sbuf *buf;
4721 	int error = 0;
4722 
4723 	buf = sbuf_new_for_sysctl(NULL, NULL, 128, req);
4724 	if (!buf) {
4725 		device_printf(dev, "Could not allocate sbuf for output.\n");
4726 		return (ENOMEM);
4727 	}
4728 
4729 	em_sbuf_fw_version(&sc->fw_ver, buf);
4730 
4731 	error = sbuf_finish(buf);
4732 	if (error)
4733 		device_printf(dev, "Error finishing sbuf: %d\n", error);
4734 
4735 	sbuf_delete(buf);
4736 
4737 	return (0);
4738 }
4739 
4740 /**********************************************************************
4741  *
4742  *  This routine provides a way to dump out the adapter eeprom,
4743  *  often a useful debug/service tool. This only dumps the first
4744  *  32 words, stuff that matters is in that extent.
4745  *
4746  **********************************************************************/
4747 static int
4748 em_sysctl_nvm_info(SYSCTL_HANDLER_ARGS)
4749 {
4750 	struct e1000_softc *sc = (struct e1000_softc *)arg1;
4751 	int error;
4752 	int result;
4753 
4754 	result = -1;
4755 	error = sysctl_handle_int(oidp, &result, 0, req);
4756 
4757 	if (error || !req->newptr)
4758 		return (error);
4759 
4760 	/*
4761 	 * This value will cause a hex dump of the
4762 	 * first 32 16-bit words of the EEPROM to
4763 	 * the screen.
4764 	 */
4765 	if (result == 1)
4766 		em_print_nvm_info(sc);
4767 
4768 	return (error);
4769 }
4770 
4771 static void
4772 em_print_nvm_info(struct e1000_softc *sc)
4773 {
4774 	struct e1000_hw *hw = &sc->hw;
4775 	struct sx *iflib_ctx_lock = iflib_ctx_lock_get(sc->ctx);
4776 	u16 eeprom_data;
4777 	int i, j, row = 0;
4778 
4779 	/* Its a bit crude, but it gets the job done */
4780 	printf("\nInterface EEPROM Dump:\n");
4781 	printf("Offset\n0x0000  ");
4782 
4783 	/* We rely on the IFLIB_CTX_LOCK as part of NVM locking model */
4784 	sx_xlock(iflib_ctx_lock);
4785 	ASSERT_CTX_LOCK_HELD(hw);
4786 	for (i = 0, j = 0; i < 32; i++, j++) {
4787 		if (j == 8) { /* Make the offset block */
4788 			j = 0; ++row;
4789 			printf("\n0x00%x0  ",row);
4790 		}
4791 		e1000_read_nvm(hw, i, 1, &eeprom_data);
4792 		printf("%04x ", eeprom_data);
4793 	}
4794 	sx_xunlock(iflib_ctx_lock);
4795 	printf("\n");
4796 }
4797 
4798 static int
4799 em_sysctl_int_delay(SYSCTL_HANDLER_ARGS)
4800 {
4801 	struct em_int_delay_info *info;
4802 	struct e1000_softc *sc;
4803 	u32 regval;
4804 	int error, usecs, ticks;
4805 
4806 	info = (struct em_int_delay_info *) arg1;
4807 	usecs = info->value;
4808 	error = sysctl_handle_int(oidp, &usecs, 0, req);
4809 	if (error != 0 || req->newptr == NULL)
4810 		return (error);
4811 	if (usecs < 0 || usecs > EM_TICKS_TO_USECS(65535))
4812 		return (EINVAL);
4813 	info->value = usecs;
4814 	ticks = EM_USECS_TO_TICKS(usecs);
4815 	if (info->offset == E1000_ITR)	/* units are 256ns here */
4816 		ticks *= 4;
4817 
4818 	sc = info->sc;
4819 
4820 	regval = E1000_READ_OFFSET(&sc->hw, info->offset);
4821 	regval = (regval & ~0xffff) | (ticks & 0xffff);
4822 	/* Handle a few special cases. */
4823 	switch (info->offset) {
4824 	case E1000_RDTR:
4825 		break;
4826 	case E1000_TIDV:
4827 		if (ticks == 0) {
4828 			sc->txd_cmd &= ~E1000_TXD_CMD_IDE;
4829 			/* Don't write 0 into the TIDV register. */
4830 			regval++;
4831 		} else
4832 			sc->txd_cmd |= E1000_TXD_CMD_IDE;
4833 		break;
4834 	}
4835 	E1000_WRITE_OFFSET(&sc->hw, info->offset, regval);
4836 	return (0);
4837 }
4838 
4839 static void
4840 em_add_int_delay_sysctl(struct e1000_softc *sc, const char *name,
4841 	const char *description, struct em_int_delay_info *info,
4842 	int offset, int value)
4843 {
4844 	info->sc = sc;
4845 	info->offset = offset;
4846 	info->value = value;
4847 	SYSCTL_ADD_PROC(device_get_sysctl_ctx(sc->dev),
4848 	    SYSCTL_CHILDREN(device_get_sysctl_tree(sc->dev)),
4849 	    OID_AUTO, name, CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_NEEDGIANT,
4850 	    info, 0, em_sysctl_int_delay, "I", description);
4851 }
4852 
4853 /*
4854  * Set flow control using sysctl:
4855  * Flow control values:
4856  *      0 - off
4857  *      1 - rx pause
4858  *      2 - tx pause
4859  *      3 - full
4860  */
4861 static int
4862 em_set_flowcntl(SYSCTL_HANDLER_ARGS)
4863 {
4864 	int error;
4865 	static int input = 3; /* default is full */
4866 	struct e1000_softc	*sc = (struct e1000_softc *) arg1;
4867 
4868 	error = sysctl_handle_int(oidp, &input, 0, req);
4869 
4870 	if ((error) || (req->newptr == NULL))
4871 		return (error);
4872 
4873 	if (input == sc->fc) /* no change? */
4874 		return (error);
4875 
4876 	switch (input) {
4877 	case e1000_fc_rx_pause:
4878 	case e1000_fc_tx_pause:
4879 	case e1000_fc_full:
4880 	case e1000_fc_none:
4881 		sc->hw.fc.requested_mode = input;
4882 		sc->fc = input;
4883 		break;
4884 	default:
4885 		/* Do nothing */
4886 		return (error);
4887 	}
4888 
4889 	sc->hw.fc.current_mode = sc->hw.fc.requested_mode;
4890 	e1000_force_mac_fc(&sc->hw);
4891 	return (error);
4892 }
4893 
4894 /*
4895  * Manage Energy Efficient Ethernet:
4896  * Control values:
4897  *     0/1 - enabled/disabled
4898  */
4899 static int
4900 em_sysctl_eee(SYSCTL_HANDLER_ARGS)
4901 {
4902 	struct e1000_softc *sc = (struct e1000_softc *) arg1;
4903 	int error, value;
4904 
4905 	value = sc->hw.dev_spec.ich8lan.eee_disable;
4906 	error = sysctl_handle_int(oidp, &value, 0, req);
4907 	if (error || req->newptr == NULL)
4908 		return (error);
4909 	sc->hw.dev_spec.ich8lan.eee_disable = (value != 0);
4910 	em_if_init(sc->ctx);
4911 
4912 	return (0);
4913 }
4914 
4915 static int
4916 em_sysctl_debug_info(SYSCTL_HANDLER_ARGS)
4917 {
4918 	struct e1000_softc *sc;
4919 	int error;
4920 	int result;
4921 
4922 	result = -1;
4923 	error = sysctl_handle_int(oidp, &result, 0, req);
4924 
4925 	if (error || !req->newptr)
4926 		return (error);
4927 
4928 	if (result == 1) {
4929 		sc = (struct e1000_softc *) arg1;
4930 		em_print_debug_info(sc);
4931 	}
4932 
4933 	return (error);
4934 }
4935 
4936 static int
4937 em_get_rs(SYSCTL_HANDLER_ARGS)
4938 {
4939 	struct e1000_softc *sc = (struct e1000_softc *) arg1;
4940 	int error;
4941 	int result;
4942 
4943 	result = 0;
4944 	error = sysctl_handle_int(oidp, &result, 0, req);
4945 
4946 	if (error || !req->newptr || result != 1)
4947 		return (error);
4948 	em_dump_rs(sc);
4949 
4950 	return (error);
4951 }
4952 
4953 static void
4954 em_if_debug(if_ctx_t ctx)
4955 {
4956 	em_dump_rs(iflib_get_softc(ctx));
4957 }
4958 
4959 /*
4960  * This routine is meant to be fluid, add whatever is
4961  * needed for debugging a problem.  -jfv
4962  */
4963 static void
4964 em_print_debug_info(struct e1000_softc *sc)
4965 {
4966 	device_t dev = iflib_get_dev(sc->ctx);
4967 	if_t ifp = iflib_get_ifp(sc->ctx);
4968 	struct tx_ring *txr = &sc->tx_queues->txr;
4969 	struct rx_ring *rxr = &sc->rx_queues->rxr;
4970 
4971 	if (if_getdrvflags(ifp) & IFF_DRV_RUNNING)
4972 		printf("Interface is RUNNING ");
4973 	else
4974 		printf("Interface is NOT RUNNING\n");
4975 
4976 	if (if_getdrvflags(ifp) & IFF_DRV_OACTIVE)
4977 		printf("and INACTIVE\n");
4978 	else
4979 		printf("and ACTIVE\n");
4980 
4981 	for (int i = 0; i < sc->tx_num_queues; i++, txr++) {
4982 		device_printf(dev, "TX Queue %d ------\n", i);
4983 		device_printf(dev, "hw tdh = %d, hw tdt = %d\n",
4984 			E1000_READ_REG(&sc->hw, E1000_TDH(i)),
4985 			E1000_READ_REG(&sc->hw, E1000_TDT(i)));
4986 
4987 	}
4988 	for (int j=0; j < sc->rx_num_queues; j++, rxr++) {
4989 		device_printf(dev, "RX Queue %d ------\n", j);
4990 		device_printf(dev, "hw rdh = %d, hw rdt = %d\n",
4991 			E1000_READ_REG(&sc->hw, E1000_RDH(j)),
4992 			E1000_READ_REG(&sc->hw, E1000_RDT(j)));
4993 	}
4994 }
4995 
4996 /*
4997  * 82574 only:
4998  * Write a new value to the EEPROM increasing the number of MSI-X
4999  * vectors from 3 to 5, for proper multiqueue support.
5000  */
5001 static void
5002 em_enable_vectors_82574(if_ctx_t ctx)
5003 {
5004 	struct e1000_softc *sc = iflib_get_softc(ctx);
5005 	struct e1000_hw *hw = &sc->hw;
5006 	device_t dev = iflib_get_dev(ctx);
5007 	u16 edata;
5008 
5009 	e1000_read_nvm(hw, EM_NVM_PCIE_CTRL, 1, &edata);
5010 	if (bootverbose)
5011 		device_printf(dev, "EM_NVM_PCIE_CTRL = %#06x\n", edata);
5012 	if (((edata & EM_NVM_MSIX_N_MASK) >> EM_NVM_MSIX_N_SHIFT) != 4) {
5013 		device_printf(dev, "Writing to eeprom: increasing "
5014 		    "reported MSI-X vectors from 3 to 5...\n");
5015 		edata &= ~(EM_NVM_MSIX_N_MASK);
5016 		edata |= 4 << EM_NVM_MSIX_N_SHIFT;
5017 		e1000_write_nvm(hw, EM_NVM_PCIE_CTRL, 1, &edata);
5018 		e1000_update_nvm_checksum(hw);
5019 		device_printf(dev, "Writing to eeprom: done\n");
5020 	}
5021 }
5022