1 /****************************************************************************** 2 SPDX-License-Identifier: BSD-3-Clause 3 4 Copyright (c) 2001-2020, Intel Corporation 5 All rights reserved. 6 7 Redistribution and use in source and binary forms, with or without 8 modification, are permitted provided that the following conditions are met: 9 10 1. Redistributions of source code must retain the above copyright notice, 11 this list of conditions and the following disclaimer. 12 13 2. Redistributions in binary form must reproduce the above copyright 14 notice, this list of conditions and the following disclaimer in the 15 documentation and/or other materials provided with the distribution. 16 17 3. Neither the name of the Intel Corporation nor the names of its 18 contributors may be used to endorse or promote products derived from 19 this software without specific prior written permission. 20 21 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 22 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 24 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 25 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 26 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 27 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 28 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 29 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 30 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 31 POSSIBILITY OF SUCH DAMAGE. 32 33 ******************************************************************************/ 34 /*$FreeBSD$*/ 35 36 #include "e1000_api.h" 37 38 static void e1000_reload_nvm_generic(struct e1000_hw *hw); 39 40 /** 41 * e1000_init_nvm_ops_generic - Initialize NVM function pointers 42 * @hw: pointer to the HW structure 43 * 44 * Setups up the function pointers to no-op functions 45 **/ 46 void e1000_init_nvm_ops_generic(struct e1000_hw *hw) 47 { 48 struct e1000_nvm_info *nvm = &hw->nvm; 49 DEBUGFUNC("e1000_init_nvm_ops_generic"); 50 51 /* Initialize function pointers */ 52 nvm->ops.init_params = e1000_null_ops_generic; 53 nvm->ops.acquire = e1000_null_ops_generic; 54 nvm->ops.read = e1000_null_read_nvm; 55 nvm->ops.release = e1000_null_nvm_generic; 56 nvm->ops.reload = e1000_reload_nvm_generic; 57 nvm->ops.update = e1000_null_ops_generic; 58 nvm->ops.valid_led_default = e1000_null_led_default; 59 nvm->ops.validate = e1000_null_ops_generic; 60 nvm->ops.write = e1000_null_write_nvm; 61 } 62 63 /** 64 * e1000_null_nvm_read - No-op function, return 0 65 * @hw: pointer to the HW structure 66 * @a: dummy variable 67 * @b: dummy variable 68 * @c: dummy variable 69 **/ 70 s32 e1000_null_read_nvm(struct e1000_hw E1000_UNUSEDARG *hw, 71 u16 E1000_UNUSEDARG a, u16 E1000_UNUSEDARG b, 72 u16 E1000_UNUSEDARG *c) 73 { 74 DEBUGFUNC("e1000_null_read_nvm"); 75 return E1000_SUCCESS; 76 } 77 78 /** 79 * e1000_null_nvm_generic - No-op function, return void 80 * @hw: pointer to the HW structure 81 **/ 82 void e1000_null_nvm_generic(struct e1000_hw E1000_UNUSEDARG *hw) 83 { 84 DEBUGFUNC("e1000_null_nvm_generic"); 85 return; 86 } 87 88 /** 89 * e1000_null_led_default - No-op function, return 0 90 * @hw: pointer to the HW structure 91 * @data: dummy variable 92 **/ 93 s32 e1000_null_led_default(struct e1000_hw E1000_UNUSEDARG *hw, 94 u16 E1000_UNUSEDARG *data) 95 { 96 DEBUGFUNC("e1000_null_led_default"); 97 return E1000_SUCCESS; 98 } 99 100 /** 101 * e1000_null_write_nvm - No-op function, return 0 102 * @hw: pointer to the HW structure 103 * @a: dummy variable 104 * @b: dummy variable 105 * @c: dummy variable 106 **/ 107 s32 e1000_null_write_nvm(struct e1000_hw E1000_UNUSEDARG *hw, 108 u16 E1000_UNUSEDARG a, u16 E1000_UNUSEDARG b, 109 u16 E1000_UNUSEDARG *c) 110 { 111 DEBUGFUNC("e1000_null_write_nvm"); 112 return E1000_SUCCESS; 113 } 114 115 /** 116 * e1000_raise_eec_clk - Raise EEPROM clock 117 * @hw: pointer to the HW structure 118 * @eecd: pointer to the EEPROM 119 * 120 * Enable/Raise the EEPROM clock bit. 121 **/ 122 static void e1000_raise_eec_clk(struct e1000_hw *hw, u32 *eecd) 123 { 124 *eecd = *eecd | E1000_EECD_SK; 125 E1000_WRITE_REG(hw, E1000_EECD, *eecd); 126 E1000_WRITE_FLUSH(hw); 127 usec_delay(hw->nvm.delay_usec); 128 } 129 130 /** 131 * e1000_lower_eec_clk - Lower EEPROM clock 132 * @hw: pointer to the HW structure 133 * @eecd: pointer to the EEPROM 134 * 135 * Clear/Lower the EEPROM clock bit. 136 **/ 137 static void e1000_lower_eec_clk(struct e1000_hw *hw, u32 *eecd) 138 { 139 *eecd = *eecd & ~E1000_EECD_SK; 140 E1000_WRITE_REG(hw, E1000_EECD, *eecd); 141 E1000_WRITE_FLUSH(hw); 142 usec_delay(hw->nvm.delay_usec); 143 } 144 145 /** 146 * e1000_shift_out_eec_bits - Shift data bits our to the EEPROM 147 * @hw: pointer to the HW structure 148 * @data: data to send to the EEPROM 149 * @count: number of bits to shift out 150 * 151 * We need to shift 'count' bits out to the EEPROM. So, the value in the 152 * "data" parameter will be shifted out to the EEPROM one bit at a time. 153 * In order to do this, "data" must be broken down into bits. 154 **/ 155 static void e1000_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count) 156 { 157 struct e1000_nvm_info *nvm = &hw->nvm; 158 u32 eecd = E1000_READ_REG(hw, E1000_EECD); 159 u32 mask; 160 161 DEBUGFUNC("e1000_shift_out_eec_bits"); 162 163 mask = 0x01 << (count - 1); 164 if (nvm->type == e1000_nvm_eeprom_microwire) 165 eecd &= ~E1000_EECD_DO; 166 else 167 if (nvm->type == e1000_nvm_eeprom_spi) 168 eecd |= E1000_EECD_DO; 169 170 do { 171 eecd &= ~E1000_EECD_DI; 172 173 if (data & mask) 174 eecd |= E1000_EECD_DI; 175 176 E1000_WRITE_REG(hw, E1000_EECD, eecd); 177 E1000_WRITE_FLUSH(hw); 178 179 usec_delay(nvm->delay_usec); 180 181 e1000_raise_eec_clk(hw, &eecd); 182 e1000_lower_eec_clk(hw, &eecd); 183 184 mask >>= 1; 185 } while (mask); 186 187 eecd &= ~E1000_EECD_DI; 188 E1000_WRITE_REG(hw, E1000_EECD, eecd); 189 } 190 191 /** 192 * e1000_shift_in_eec_bits - Shift data bits in from the EEPROM 193 * @hw: pointer to the HW structure 194 * @count: number of bits to shift in 195 * 196 * In order to read a register from the EEPROM, we need to shift 'count' bits 197 * in from the EEPROM. Bits are "shifted in" by raising the clock input to 198 * the EEPROM (setting the SK bit), and then reading the value of the data out 199 * "DO" bit. During this "shifting in" process the data in "DI" bit should 200 * always be clear. 201 **/ 202 static u16 e1000_shift_in_eec_bits(struct e1000_hw *hw, u16 count) 203 { 204 u32 eecd; 205 u32 i; 206 u16 data; 207 208 DEBUGFUNC("e1000_shift_in_eec_bits"); 209 210 eecd = E1000_READ_REG(hw, E1000_EECD); 211 212 eecd &= ~(E1000_EECD_DO | E1000_EECD_DI); 213 data = 0; 214 215 for (i = 0; i < count; i++) { 216 data <<= 1; 217 e1000_raise_eec_clk(hw, &eecd); 218 219 eecd = E1000_READ_REG(hw, E1000_EECD); 220 221 eecd &= ~E1000_EECD_DI; 222 if (eecd & E1000_EECD_DO) 223 data |= 1; 224 225 e1000_lower_eec_clk(hw, &eecd); 226 } 227 228 return data; 229 } 230 231 /** 232 * e1000_poll_eerd_eewr_done - Poll for EEPROM read/write completion 233 * @hw: pointer to the HW structure 234 * @ee_reg: EEPROM flag for polling 235 * 236 * Polls the EEPROM status bit for either read or write completion based 237 * upon the value of 'ee_reg'. 238 **/ 239 s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg) 240 { 241 u32 attempts = 100000; 242 u32 i, reg = 0; 243 244 DEBUGFUNC("e1000_poll_eerd_eewr_done"); 245 246 for (i = 0; i < attempts; i++) { 247 if (ee_reg == E1000_NVM_POLL_READ) 248 reg = E1000_READ_REG(hw, E1000_EERD); 249 else 250 reg = E1000_READ_REG(hw, E1000_EEWR); 251 252 if (reg & E1000_NVM_RW_REG_DONE) 253 return E1000_SUCCESS; 254 255 usec_delay(5); 256 } 257 258 return -E1000_ERR_NVM; 259 } 260 261 /** 262 * e1000_acquire_nvm_generic - Generic request for access to EEPROM 263 * @hw: pointer to the HW structure 264 * 265 * Set the EEPROM access request bit and wait for EEPROM access grant bit. 266 * Return successful if access grant bit set, else clear the request for 267 * EEPROM access and return -E1000_ERR_NVM (-1). 268 **/ 269 s32 e1000_acquire_nvm_generic(struct e1000_hw *hw) 270 { 271 u32 eecd = E1000_READ_REG(hw, E1000_EECD); 272 s32 timeout = E1000_NVM_GRANT_ATTEMPTS; 273 274 DEBUGFUNC("e1000_acquire_nvm_generic"); 275 276 E1000_WRITE_REG(hw, E1000_EECD, eecd | E1000_EECD_REQ); 277 eecd = E1000_READ_REG(hw, E1000_EECD); 278 279 while (timeout) { 280 if (eecd & E1000_EECD_GNT) 281 break; 282 usec_delay(5); 283 eecd = E1000_READ_REG(hw, E1000_EECD); 284 timeout--; 285 } 286 287 if (!timeout) { 288 eecd &= ~E1000_EECD_REQ; 289 E1000_WRITE_REG(hw, E1000_EECD, eecd); 290 DEBUGOUT("Could not acquire NVM grant\n"); 291 return -E1000_ERR_NVM; 292 } 293 294 return E1000_SUCCESS; 295 } 296 297 /** 298 * e1000_standby_nvm - Return EEPROM to standby state 299 * @hw: pointer to the HW structure 300 * 301 * Return the EEPROM to a standby state. 302 **/ 303 static void e1000_standby_nvm(struct e1000_hw *hw) 304 { 305 struct e1000_nvm_info *nvm = &hw->nvm; 306 u32 eecd = E1000_READ_REG(hw, E1000_EECD); 307 308 DEBUGFUNC("e1000_standby_nvm"); 309 310 if (nvm->type == e1000_nvm_eeprom_microwire) { 311 eecd &= ~(E1000_EECD_CS | E1000_EECD_SK); 312 E1000_WRITE_REG(hw, E1000_EECD, eecd); 313 E1000_WRITE_FLUSH(hw); 314 usec_delay(nvm->delay_usec); 315 316 e1000_raise_eec_clk(hw, &eecd); 317 318 /* Select EEPROM */ 319 eecd |= E1000_EECD_CS; 320 E1000_WRITE_REG(hw, E1000_EECD, eecd); 321 E1000_WRITE_FLUSH(hw); 322 usec_delay(nvm->delay_usec); 323 324 e1000_lower_eec_clk(hw, &eecd); 325 } else if (nvm->type == e1000_nvm_eeprom_spi) { 326 /* Toggle CS to flush commands */ 327 eecd |= E1000_EECD_CS; 328 E1000_WRITE_REG(hw, E1000_EECD, eecd); 329 E1000_WRITE_FLUSH(hw); 330 usec_delay(nvm->delay_usec); 331 eecd &= ~E1000_EECD_CS; 332 E1000_WRITE_REG(hw, E1000_EECD, eecd); 333 E1000_WRITE_FLUSH(hw); 334 usec_delay(nvm->delay_usec); 335 } 336 } 337 338 /** 339 * e1000_stop_nvm - Terminate EEPROM command 340 * @hw: pointer to the HW structure 341 * 342 * Terminates the current command by inverting the EEPROM's chip select pin. 343 **/ 344 void e1000_stop_nvm(struct e1000_hw *hw) 345 { 346 u32 eecd; 347 348 DEBUGFUNC("e1000_stop_nvm"); 349 350 eecd = E1000_READ_REG(hw, E1000_EECD); 351 if (hw->nvm.type == e1000_nvm_eeprom_spi) { 352 /* Pull CS high */ 353 eecd |= E1000_EECD_CS; 354 e1000_lower_eec_clk(hw, &eecd); 355 } else if (hw->nvm.type == e1000_nvm_eeprom_microwire) { 356 /* CS on Microwire is active-high */ 357 eecd &= ~(E1000_EECD_CS | E1000_EECD_DI); 358 E1000_WRITE_REG(hw, E1000_EECD, eecd); 359 e1000_raise_eec_clk(hw, &eecd); 360 e1000_lower_eec_clk(hw, &eecd); 361 } 362 } 363 364 /** 365 * e1000_release_nvm_generic - Release exclusive access to EEPROM 366 * @hw: pointer to the HW structure 367 * 368 * Stop any current commands to the EEPROM and clear the EEPROM request bit. 369 **/ 370 void e1000_release_nvm_generic(struct e1000_hw *hw) 371 { 372 u32 eecd; 373 374 DEBUGFUNC("e1000_release_nvm_generic"); 375 376 e1000_stop_nvm(hw); 377 378 eecd = E1000_READ_REG(hw, E1000_EECD); 379 eecd &= ~E1000_EECD_REQ; 380 E1000_WRITE_REG(hw, E1000_EECD, eecd); 381 } 382 383 /** 384 * e1000_ready_nvm_eeprom - Prepares EEPROM for read/write 385 * @hw: pointer to the HW structure 386 * 387 * Setups the EEPROM for reading and writing. 388 **/ 389 static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw) 390 { 391 struct e1000_nvm_info *nvm = &hw->nvm; 392 u32 eecd = E1000_READ_REG(hw, E1000_EECD); 393 u8 spi_stat_reg; 394 395 DEBUGFUNC("e1000_ready_nvm_eeprom"); 396 397 if (nvm->type == e1000_nvm_eeprom_microwire) { 398 /* Clear SK and DI */ 399 eecd &= ~(E1000_EECD_DI | E1000_EECD_SK); 400 E1000_WRITE_REG(hw, E1000_EECD, eecd); 401 /* Set CS */ 402 eecd |= E1000_EECD_CS; 403 E1000_WRITE_REG(hw, E1000_EECD, eecd); 404 } else if (nvm->type == e1000_nvm_eeprom_spi) { 405 u16 timeout = NVM_MAX_RETRY_SPI; 406 407 /* Clear SK and CS */ 408 eecd &= ~(E1000_EECD_CS | E1000_EECD_SK); 409 E1000_WRITE_REG(hw, E1000_EECD, eecd); 410 E1000_WRITE_FLUSH(hw); 411 usec_delay(1); 412 413 /* Read "Status Register" repeatedly until the LSB is cleared. 414 * The EEPROM will signal that the command has been completed 415 * by clearing bit 0 of the internal status register. If it's 416 * not cleared within 'timeout', then error out. 417 */ 418 while (timeout) { 419 e1000_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI, 420 hw->nvm.opcode_bits); 421 spi_stat_reg = (u8)e1000_shift_in_eec_bits(hw, 8); 422 if (!(spi_stat_reg & NVM_STATUS_RDY_SPI)) 423 break; 424 425 usec_delay(5); 426 e1000_standby_nvm(hw); 427 timeout--; 428 } 429 430 if (!timeout) { 431 DEBUGOUT("SPI NVM Status error\n"); 432 return -E1000_ERR_NVM; 433 } 434 } 435 436 return E1000_SUCCESS; 437 } 438 439 /** 440 * e1000_read_nvm_spi - Read EEPROM's using SPI 441 * @hw: pointer to the HW structure 442 * @offset: offset of word in the EEPROM to read 443 * @words: number of words to read 444 * @data: word read from the EEPROM 445 * 446 * Reads a 16 bit word from the EEPROM. 447 **/ 448 s32 e1000_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) 449 { 450 struct e1000_nvm_info *nvm = &hw->nvm; 451 u32 i = 0; 452 s32 ret_val; 453 u16 word_in; 454 u8 read_opcode = NVM_READ_OPCODE_SPI; 455 456 DEBUGFUNC("e1000_read_nvm_spi"); 457 458 /* A check for invalid values: offset too large, too many words, 459 * and not enough words. 460 */ 461 if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || 462 (words == 0)) { 463 DEBUGOUT("nvm parameter(s) out of bounds\n"); 464 return -E1000_ERR_NVM; 465 } 466 467 ret_val = nvm->ops.acquire(hw); 468 if (ret_val) 469 return ret_val; 470 471 ret_val = e1000_ready_nvm_eeprom(hw); 472 if (ret_val) 473 goto release; 474 475 e1000_standby_nvm(hw); 476 477 if ((nvm->address_bits == 8) && (offset >= 128)) 478 read_opcode |= NVM_A8_OPCODE_SPI; 479 480 /* Send the READ command (opcode + addr) */ 481 e1000_shift_out_eec_bits(hw, read_opcode, nvm->opcode_bits); 482 e1000_shift_out_eec_bits(hw, (u16)(offset*2), nvm->address_bits); 483 484 /* Read the data. SPI NVMs increment the address with each byte 485 * read and will roll over if reading beyond the end. This allows 486 * us to read the whole NVM from any offset 487 */ 488 for (i = 0; i < words; i++) { 489 word_in = e1000_shift_in_eec_bits(hw, 16); 490 data[i] = (word_in >> 8) | (word_in << 8); 491 } 492 493 release: 494 nvm->ops.release(hw); 495 496 return ret_val; 497 } 498 499 /** 500 * e1000_read_nvm_microwire - Reads EEPROM's using microwire 501 * @hw: pointer to the HW structure 502 * @offset: offset of word in the EEPROM to read 503 * @words: number of words to read 504 * @data: word read from the EEPROM 505 * 506 * Reads a 16 bit word from the EEPROM. 507 **/ 508 s32 e1000_read_nvm_microwire(struct e1000_hw *hw, u16 offset, u16 words, 509 u16 *data) 510 { 511 struct e1000_nvm_info *nvm = &hw->nvm; 512 u32 i = 0; 513 s32 ret_val; 514 u8 read_opcode = NVM_READ_OPCODE_MICROWIRE; 515 516 DEBUGFUNC("e1000_read_nvm_microwire"); 517 518 /* A check for invalid values: offset too large, too many words, 519 * and not enough words. 520 */ 521 if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || 522 (words == 0)) { 523 DEBUGOUT("nvm parameter(s) out of bounds\n"); 524 return -E1000_ERR_NVM; 525 } 526 527 ret_val = nvm->ops.acquire(hw); 528 if (ret_val) 529 return ret_val; 530 531 ret_val = e1000_ready_nvm_eeprom(hw); 532 if (ret_val) 533 goto release; 534 535 for (i = 0; i < words; i++) { 536 /* Send the READ command (opcode + addr) */ 537 e1000_shift_out_eec_bits(hw, read_opcode, nvm->opcode_bits); 538 e1000_shift_out_eec_bits(hw, (u16)(offset + i), 539 nvm->address_bits); 540 541 /* Read the data. For microwire, each word requires the 542 * overhead of setup and tear-down. 543 */ 544 data[i] = e1000_shift_in_eec_bits(hw, 16); 545 e1000_standby_nvm(hw); 546 } 547 548 release: 549 nvm->ops.release(hw); 550 551 return ret_val; 552 } 553 554 /** 555 * e1000_read_nvm_eerd - Reads EEPROM using EERD register 556 * @hw: pointer to the HW structure 557 * @offset: offset of word in the EEPROM to read 558 * @words: number of words to read 559 * @data: word read from the EEPROM 560 * 561 * Reads a 16 bit word from the EEPROM using the EERD register. 562 **/ 563 s32 e1000_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) 564 { 565 struct e1000_nvm_info *nvm = &hw->nvm; 566 u32 i, eerd = 0; 567 s32 ret_val = E1000_SUCCESS; 568 569 DEBUGFUNC("e1000_read_nvm_eerd"); 570 571 /* A check for invalid values: offset too large, too many words, 572 * too many words for the offset, and not enough words. 573 */ 574 if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || 575 (words == 0)) { 576 DEBUGOUT("nvm parameter(s) out of bounds\n"); 577 return -E1000_ERR_NVM; 578 } 579 580 for (i = 0; i < words; i++) { 581 eerd = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) + 582 E1000_NVM_RW_REG_START; 583 584 E1000_WRITE_REG(hw, E1000_EERD, eerd); 585 ret_val = e1000_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ); 586 if (ret_val) 587 break; 588 589 data[i] = (E1000_READ_REG(hw, E1000_EERD) >> 590 E1000_NVM_RW_REG_DATA); 591 } 592 593 if (ret_val) 594 DEBUGOUT1("NVM read error: %d\n", ret_val); 595 596 return ret_val; 597 } 598 599 /** 600 * e1000_write_nvm_spi - Write to EEPROM using SPI 601 * @hw: pointer to the HW structure 602 * @offset: offset within the EEPROM to be written to 603 * @words: number of words to write 604 * @data: 16 bit word(s) to be written to the EEPROM 605 * 606 * Writes data to EEPROM at offset using SPI interface. 607 * 608 * If e1000_update_nvm_checksum is not called after this function , the 609 * EEPROM will most likely contain an invalid checksum. 610 **/ 611 s32 e1000_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) 612 { 613 struct e1000_nvm_info *nvm = &hw->nvm; 614 s32 ret_val = -E1000_ERR_NVM; 615 u16 widx = 0; 616 617 DEBUGFUNC("e1000_write_nvm_spi"); 618 619 /* A check for invalid values: offset too large, too many words, 620 * and not enough words. 621 */ 622 if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || 623 (words == 0)) { 624 DEBUGOUT("nvm parameter(s) out of bounds\n"); 625 return -E1000_ERR_NVM; 626 } 627 628 while (widx < words) { 629 u8 write_opcode = NVM_WRITE_OPCODE_SPI; 630 631 ret_val = nvm->ops.acquire(hw); 632 if (ret_val) 633 return ret_val; 634 635 ret_val = e1000_ready_nvm_eeprom(hw); 636 if (ret_val) { 637 nvm->ops.release(hw); 638 return ret_val; 639 } 640 641 e1000_standby_nvm(hw); 642 643 /* Send the WRITE ENABLE command (8 bit opcode) */ 644 e1000_shift_out_eec_bits(hw, NVM_WREN_OPCODE_SPI, 645 nvm->opcode_bits); 646 647 e1000_standby_nvm(hw); 648 649 /* Some SPI eeproms use the 8th address bit embedded in the 650 * opcode 651 */ 652 if ((nvm->address_bits == 8) && (offset >= 128)) 653 write_opcode |= NVM_A8_OPCODE_SPI; 654 655 /* Send the Write command (8-bit opcode + addr) */ 656 e1000_shift_out_eec_bits(hw, write_opcode, nvm->opcode_bits); 657 e1000_shift_out_eec_bits(hw, (u16)((offset + widx) * 2), 658 nvm->address_bits); 659 660 /* Loop to allow for up to whole page write of eeprom */ 661 while (widx < words) { 662 u16 word_out = data[widx]; 663 word_out = (word_out >> 8) | (word_out << 8); 664 e1000_shift_out_eec_bits(hw, word_out, 16); 665 widx++; 666 667 if ((((offset + widx) * 2) % nvm->page_size) == 0) { 668 e1000_standby_nvm(hw); 669 break; 670 } 671 } 672 msec_delay(10); 673 nvm->ops.release(hw); 674 } 675 676 return ret_val; 677 } 678 679 /** 680 * e1000_write_nvm_microwire - Writes EEPROM using microwire 681 * @hw: pointer to the HW structure 682 * @offset: offset within the EEPROM to be written to 683 * @words: number of words to write 684 * @data: 16 bit word(s) to be written to the EEPROM 685 * 686 * Writes data to EEPROM at offset using microwire interface. 687 * 688 * If e1000_update_nvm_checksum is not called after this function , the 689 * EEPROM will most likely contain an invalid checksum. 690 **/ 691 s32 e1000_write_nvm_microwire(struct e1000_hw *hw, u16 offset, u16 words, 692 u16 *data) 693 { 694 struct e1000_nvm_info *nvm = &hw->nvm; 695 s32 ret_val; 696 u32 eecd; 697 u16 words_written = 0; 698 u16 widx = 0; 699 700 DEBUGFUNC("e1000_write_nvm_microwire"); 701 702 /* A check for invalid values: offset too large, too many words, 703 * and not enough words. 704 */ 705 if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || 706 (words == 0)) { 707 DEBUGOUT("nvm parameter(s) out of bounds\n"); 708 return -E1000_ERR_NVM; 709 } 710 711 ret_val = nvm->ops.acquire(hw); 712 if (ret_val) 713 return ret_val; 714 715 ret_val = e1000_ready_nvm_eeprom(hw); 716 if (ret_val) 717 goto release; 718 719 e1000_shift_out_eec_bits(hw, NVM_EWEN_OPCODE_MICROWIRE, 720 (u16)(nvm->opcode_bits + 2)); 721 722 e1000_shift_out_eec_bits(hw, 0, (u16)(nvm->address_bits - 2)); 723 724 e1000_standby_nvm(hw); 725 726 while (words_written < words) { 727 e1000_shift_out_eec_bits(hw, NVM_WRITE_OPCODE_MICROWIRE, 728 nvm->opcode_bits); 729 730 e1000_shift_out_eec_bits(hw, (u16)(offset + words_written), 731 nvm->address_bits); 732 733 e1000_shift_out_eec_bits(hw, data[words_written], 16); 734 735 e1000_standby_nvm(hw); 736 737 for (widx = 0; widx < 200; widx++) { 738 eecd = E1000_READ_REG(hw, E1000_EECD); 739 if (eecd & E1000_EECD_DO) 740 break; 741 usec_delay(50); 742 } 743 744 if (widx == 200) { 745 DEBUGOUT("NVM Write did not complete\n"); 746 ret_val = -E1000_ERR_NVM; 747 goto release; 748 } 749 750 e1000_standby_nvm(hw); 751 752 words_written++; 753 } 754 755 e1000_shift_out_eec_bits(hw, NVM_EWDS_OPCODE_MICROWIRE, 756 (u16)(nvm->opcode_bits + 2)); 757 758 e1000_shift_out_eec_bits(hw, 0, (u16)(nvm->address_bits - 2)); 759 760 release: 761 nvm->ops.release(hw); 762 763 return ret_val; 764 } 765 766 /** 767 * e1000_read_pba_string_generic - Read device part number 768 * @hw: pointer to the HW structure 769 * @pba_num: pointer to device part number 770 * @pba_num_size: size of part number buffer 771 * 772 * Reads the product board assembly (PBA) number from the EEPROM and stores 773 * the value in pba_num. 774 **/ 775 s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num, 776 u32 pba_num_size) 777 { 778 s32 ret_val; 779 u16 nvm_data; 780 u16 pba_ptr; 781 u16 offset; 782 u16 length; 783 784 DEBUGFUNC("e1000_read_pba_string_generic"); 785 786 if ((hw->mac.type == e1000_i210 || 787 hw->mac.type == e1000_i211) && 788 !e1000_get_flash_presence_i210(hw)) { 789 DEBUGOUT("Flashless no PBA string\n"); 790 return -E1000_ERR_NVM_PBA_SECTION; 791 } 792 793 if (pba_num == NULL) { 794 DEBUGOUT("PBA string buffer was null\n"); 795 return -E1000_ERR_INVALID_ARGUMENT; 796 } 797 798 ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data); 799 if (ret_val) { 800 DEBUGOUT("NVM Read Error\n"); 801 return ret_val; 802 } 803 804 ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &pba_ptr); 805 if (ret_val) { 806 DEBUGOUT("NVM Read Error\n"); 807 return ret_val; 808 } 809 810 /* if nvm_data is not ptr guard the PBA must be in legacy format which 811 * means pba_ptr is actually our second data word for the PBA number 812 * and we can decode it into an ascii string 813 */ 814 if (nvm_data != NVM_PBA_PTR_GUARD) { 815 DEBUGOUT("NVM PBA number is not stored as string\n"); 816 817 /* make sure callers buffer is big enough to store the PBA */ 818 if (pba_num_size < E1000_PBANUM_LENGTH) { 819 DEBUGOUT("PBA string buffer too small\n"); 820 return E1000_ERR_NO_SPACE; 821 } 822 823 /* extract hex string from data and pba_ptr */ 824 pba_num[0] = (nvm_data >> 12) & 0xF; 825 pba_num[1] = (nvm_data >> 8) & 0xF; 826 pba_num[2] = (nvm_data >> 4) & 0xF; 827 pba_num[3] = nvm_data & 0xF; 828 pba_num[4] = (pba_ptr >> 12) & 0xF; 829 pba_num[5] = (pba_ptr >> 8) & 0xF; 830 pba_num[6] = '-'; 831 pba_num[7] = 0; 832 pba_num[8] = (pba_ptr >> 4) & 0xF; 833 pba_num[9] = pba_ptr & 0xF; 834 835 /* put a null character on the end of our string */ 836 pba_num[10] = '\0'; 837 838 /* switch all the data but the '-' to hex char */ 839 for (offset = 0; offset < 10; offset++) { 840 if (pba_num[offset] < 0xA) 841 pba_num[offset] += '0'; 842 else if (pba_num[offset] < 0x10) 843 pba_num[offset] += 'A' - 0xA; 844 } 845 846 return E1000_SUCCESS; 847 } 848 849 ret_val = hw->nvm.ops.read(hw, pba_ptr, 1, &length); 850 if (ret_val) { 851 DEBUGOUT("NVM Read Error\n"); 852 return ret_val; 853 } 854 855 if (length == 0xFFFF || length == 0) { 856 DEBUGOUT("NVM PBA number section invalid length\n"); 857 return -E1000_ERR_NVM_PBA_SECTION; 858 } 859 /* check if pba_num buffer is big enough */ 860 if (pba_num_size < (((u32)length * 2) - 1)) { 861 DEBUGOUT("PBA string buffer too small\n"); 862 return -E1000_ERR_NO_SPACE; 863 } 864 865 /* trim pba length from start of string */ 866 pba_ptr++; 867 length--; 868 869 for (offset = 0; offset < length; offset++) { 870 ret_val = hw->nvm.ops.read(hw, pba_ptr + offset, 1, &nvm_data); 871 if (ret_val) { 872 DEBUGOUT("NVM Read Error\n"); 873 return ret_val; 874 } 875 pba_num[offset * 2] = (u8)(nvm_data >> 8); 876 pba_num[(offset * 2) + 1] = (u8)(nvm_data & 0xFF); 877 } 878 pba_num[offset * 2] = '\0'; 879 880 return E1000_SUCCESS; 881 } 882 883 /** 884 * e1000_read_pba_length_generic - Read device part number length 885 * @hw: pointer to the HW structure 886 * @pba_num_size: size of part number buffer 887 * 888 * Reads the product board assembly (PBA) number length from the EEPROM and 889 * stores the value in pba_num_size. 890 **/ 891 s32 e1000_read_pba_length_generic(struct e1000_hw *hw, u32 *pba_num_size) 892 { 893 s32 ret_val; 894 u16 nvm_data; 895 u16 pba_ptr; 896 u16 length; 897 898 DEBUGFUNC("e1000_read_pba_length_generic"); 899 900 if (pba_num_size == NULL) { 901 DEBUGOUT("PBA buffer size was null\n"); 902 return -E1000_ERR_INVALID_ARGUMENT; 903 } 904 905 ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data); 906 if (ret_val) { 907 DEBUGOUT("NVM Read Error\n"); 908 return ret_val; 909 } 910 911 ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &pba_ptr); 912 if (ret_val) { 913 DEBUGOUT("NVM Read Error\n"); 914 return ret_val; 915 } 916 917 /* if data is not ptr guard the PBA must be in legacy format */ 918 if (nvm_data != NVM_PBA_PTR_GUARD) { 919 *pba_num_size = E1000_PBANUM_LENGTH; 920 return E1000_SUCCESS; 921 } 922 923 ret_val = hw->nvm.ops.read(hw, pba_ptr, 1, &length); 924 if (ret_val) { 925 DEBUGOUT("NVM Read Error\n"); 926 return ret_val; 927 } 928 929 if (length == 0xFFFF || length == 0) { 930 DEBUGOUT("NVM PBA number section invalid length\n"); 931 return -E1000_ERR_NVM_PBA_SECTION; 932 } 933 934 /* Convert from length in u16 values to u8 chars, add 1 for NULL, 935 * and subtract 2 because length field is included in length. 936 */ 937 *pba_num_size = ((u32)length * 2) - 1; 938 939 return E1000_SUCCESS; 940 } 941 942 /** 943 * e1000_read_pba_num_generic - Read device part number 944 * @hw: pointer to the HW structure 945 * @pba_num: pointer to device part number 946 * 947 * Reads the product board assembly (PBA) number from the EEPROM and stores 948 * the value in pba_num. 949 **/ 950 s32 e1000_read_pba_num_generic(struct e1000_hw *hw, u32 *pba_num) 951 { 952 s32 ret_val; 953 u16 nvm_data; 954 955 DEBUGFUNC("e1000_read_pba_num_generic"); 956 957 ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data); 958 if (ret_val) { 959 DEBUGOUT("NVM Read Error\n"); 960 return ret_val; 961 } else if (nvm_data == NVM_PBA_PTR_GUARD) { 962 DEBUGOUT("NVM Not Supported\n"); 963 return -E1000_NOT_IMPLEMENTED; 964 } 965 *pba_num = (u32)(nvm_data << 16); 966 967 ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &nvm_data); 968 if (ret_val) { 969 DEBUGOUT("NVM Read Error\n"); 970 return ret_val; 971 } 972 *pba_num |= nvm_data; 973 974 return E1000_SUCCESS; 975 } 976 977 978 /** 979 * e1000_read_pba_raw 980 * @hw: pointer to the HW structure 981 * @eeprom_buf: optional pointer to EEPROM image 982 * @eeprom_buf_size: size of EEPROM image in words 983 * @max_pba_block_size: PBA block size limit 984 * @pba: pointer to output PBA structure 985 * 986 * Reads PBA from EEPROM image when eeprom_buf is not NULL. 987 * Reads PBA from physical EEPROM device when eeprom_buf is NULL. 988 * 989 **/ 990 s32 e1000_read_pba_raw(struct e1000_hw *hw, u16 *eeprom_buf, 991 u32 eeprom_buf_size, u16 max_pba_block_size, 992 struct e1000_pba *pba) 993 { 994 s32 ret_val; 995 u16 pba_block_size; 996 997 if (pba == NULL) 998 return -E1000_ERR_PARAM; 999 1000 if (eeprom_buf == NULL) { 1001 ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_0, 2, 1002 &pba->word[0]); 1003 if (ret_val) 1004 return ret_val; 1005 } else { 1006 if (eeprom_buf_size > NVM_PBA_OFFSET_1) { 1007 pba->word[0] = eeprom_buf[NVM_PBA_OFFSET_0]; 1008 pba->word[1] = eeprom_buf[NVM_PBA_OFFSET_1]; 1009 } else { 1010 return -E1000_ERR_PARAM; 1011 } 1012 } 1013 1014 if (pba->word[0] == NVM_PBA_PTR_GUARD) { 1015 if (pba->pba_block == NULL) 1016 return -E1000_ERR_PARAM; 1017 1018 ret_val = e1000_get_pba_block_size(hw, eeprom_buf, 1019 eeprom_buf_size, 1020 &pba_block_size); 1021 if (ret_val) 1022 return ret_val; 1023 1024 if (pba_block_size > max_pba_block_size) 1025 return -E1000_ERR_PARAM; 1026 1027 if (eeprom_buf == NULL) { 1028 ret_val = e1000_read_nvm(hw, pba->word[1], 1029 pba_block_size, 1030 pba->pba_block); 1031 if (ret_val) 1032 return ret_val; 1033 } else { 1034 if (eeprom_buf_size > (u32)(pba->word[1] + 1035 pba_block_size)) { 1036 memcpy(pba->pba_block, 1037 &eeprom_buf[pba->word[1]], 1038 pba_block_size * sizeof(u16)); 1039 } else { 1040 return -E1000_ERR_PARAM; 1041 } 1042 } 1043 } 1044 1045 return E1000_SUCCESS; 1046 } 1047 1048 /** 1049 * e1000_write_pba_raw 1050 * @hw: pointer to the HW structure 1051 * @eeprom_buf: optional pointer to EEPROM image 1052 * @eeprom_buf_size: size of EEPROM image in words 1053 * @pba: pointer to PBA structure 1054 * 1055 * Writes PBA to EEPROM image when eeprom_buf is not NULL. 1056 * Writes PBA to physical EEPROM device when eeprom_buf is NULL. 1057 * 1058 **/ 1059 s32 e1000_write_pba_raw(struct e1000_hw *hw, u16 *eeprom_buf, 1060 u32 eeprom_buf_size, struct e1000_pba *pba) 1061 { 1062 s32 ret_val; 1063 1064 if (pba == NULL) 1065 return -E1000_ERR_PARAM; 1066 1067 if (eeprom_buf == NULL) { 1068 ret_val = e1000_write_nvm(hw, NVM_PBA_OFFSET_0, 2, 1069 &pba->word[0]); 1070 if (ret_val) 1071 return ret_val; 1072 } else { 1073 if (eeprom_buf_size > NVM_PBA_OFFSET_1) { 1074 eeprom_buf[NVM_PBA_OFFSET_0] = pba->word[0]; 1075 eeprom_buf[NVM_PBA_OFFSET_1] = pba->word[1]; 1076 } else { 1077 return -E1000_ERR_PARAM; 1078 } 1079 } 1080 1081 if (pba->word[0] == NVM_PBA_PTR_GUARD) { 1082 if (pba->pba_block == NULL) 1083 return -E1000_ERR_PARAM; 1084 1085 if (eeprom_buf == NULL) { 1086 ret_val = e1000_write_nvm(hw, pba->word[1], 1087 pba->pba_block[0], 1088 pba->pba_block); 1089 if (ret_val) 1090 return ret_val; 1091 } else { 1092 if (eeprom_buf_size > (u32)(pba->word[1] + 1093 pba->pba_block[0])) { 1094 memcpy(&eeprom_buf[pba->word[1]], 1095 pba->pba_block, 1096 pba->pba_block[0] * sizeof(u16)); 1097 } else { 1098 return -E1000_ERR_PARAM; 1099 } 1100 } 1101 } 1102 1103 return E1000_SUCCESS; 1104 } 1105 1106 /** 1107 * e1000_get_pba_block_size 1108 * @hw: pointer to the HW structure 1109 * @eeprom_buf: optional pointer to EEPROM image 1110 * @eeprom_buf_size: size of EEPROM image in words 1111 * @pba_data_size: pointer to output variable 1112 * 1113 * Returns the size of the PBA block in words. Function operates on EEPROM 1114 * image if the eeprom_buf pointer is not NULL otherwise it accesses physical 1115 * EEPROM device. 1116 * 1117 **/ 1118 s32 e1000_get_pba_block_size(struct e1000_hw *hw, u16 *eeprom_buf, 1119 u32 eeprom_buf_size, u16 *pba_block_size) 1120 { 1121 s32 ret_val; 1122 u16 pba_word[2]; 1123 u16 length; 1124 1125 DEBUGFUNC("e1000_get_pba_block_size"); 1126 1127 if (eeprom_buf == NULL) { 1128 ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_0, 2, &pba_word[0]); 1129 if (ret_val) 1130 return ret_val; 1131 } else { 1132 if (eeprom_buf_size > NVM_PBA_OFFSET_1) { 1133 pba_word[0] = eeprom_buf[NVM_PBA_OFFSET_0]; 1134 pba_word[1] = eeprom_buf[NVM_PBA_OFFSET_1]; 1135 } else { 1136 return -E1000_ERR_PARAM; 1137 } 1138 } 1139 1140 if (pba_word[0] == NVM_PBA_PTR_GUARD) { 1141 if (eeprom_buf == NULL) { 1142 ret_val = e1000_read_nvm(hw, pba_word[1] + 0, 1, 1143 &length); 1144 if (ret_val) 1145 return ret_val; 1146 } else { 1147 if (eeprom_buf_size > pba_word[1]) 1148 length = eeprom_buf[pba_word[1] + 0]; 1149 else 1150 return -E1000_ERR_PARAM; 1151 } 1152 1153 if (length == 0xFFFF || length == 0) 1154 return -E1000_ERR_NVM_PBA_SECTION; 1155 } else { 1156 /* PBA number in legacy format, there is no PBA Block. */ 1157 length = 0; 1158 } 1159 1160 if (pba_block_size != NULL) 1161 *pba_block_size = length; 1162 1163 return E1000_SUCCESS; 1164 } 1165 1166 /** 1167 * e1000_read_mac_addr_generic - Read device MAC address 1168 * @hw: pointer to the HW structure 1169 * 1170 * Reads the device MAC address from the EEPROM and stores the value. 1171 * Since devices with two ports use the same EEPROM, we increment the 1172 * last bit in the MAC address for the second port. 1173 **/ 1174 s32 e1000_read_mac_addr_generic(struct e1000_hw *hw) 1175 { 1176 u32 rar_high; 1177 u32 rar_low; 1178 u16 i; 1179 1180 rar_high = E1000_READ_REG(hw, E1000_RAH(0)); 1181 rar_low = E1000_READ_REG(hw, E1000_RAL(0)); 1182 1183 for (i = 0; i < E1000_RAL_MAC_ADDR_LEN; i++) 1184 hw->mac.perm_addr[i] = (u8)(rar_low >> (i*8)); 1185 1186 for (i = 0; i < E1000_RAH_MAC_ADDR_LEN; i++) 1187 hw->mac.perm_addr[i+4] = (u8)(rar_high >> (i*8)); 1188 1189 for (i = 0; i < ETHER_ADDR_LEN; i++) 1190 hw->mac.addr[i] = hw->mac.perm_addr[i]; 1191 1192 return E1000_SUCCESS; 1193 } 1194 1195 /** 1196 * e1000_validate_nvm_checksum_generic - Validate EEPROM checksum 1197 * @hw: pointer to the HW structure 1198 * 1199 * Calculates the EEPROM checksum by reading/adding each word of the EEPROM 1200 * and then verifies that the sum of the EEPROM is equal to 0xBABA. 1201 **/ 1202 s32 e1000_validate_nvm_checksum_generic(struct e1000_hw *hw) 1203 { 1204 s32 ret_val; 1205 u16 checksum = 0; 1206 u16 i, nvm_data; 1207 1208 DEBUGFUNC("e1000_validate_nvm_checksum_generic"); 1209 1210 for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) { 1211 ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data); 1212 if (ret_val) { 1213 DEBUGOUT("NVM Read Error\n"); 1214 return ret_val; 1215 } 1216 checksum += nvm_data; 1217 } 1218 1219 if (checksum != (u16) NVM_SUM) { 1220 DEBUGOUT("NVM Checksum Invalid\n"); 1221 return -E1000_ERR_NVM; 1222 } 1223 1224 return E1000_SUCCESS; 1225 } 1226 1227 /** 1228 * e1000_update_nvm_checksum_generic - Update EEPROM checksum 1229 * @hw: pointer to the HW structure 1230 * 1231 * Updates the EEPROM checksum by reading/adding each word of the EEPROM 1232 * up to the checksum. Then calculates the EEPROM checksum and writes the 1233 * value to the EEPROM. 1234 **/ 1235 s32 e1000_update_nvm_checksum_generic(struct e1000_hw *hw) 1236 { 1237 s32 ret_val; 1238 u16 checksum = 0; 1239 u16 i, nvm_data; 1240 1241 DEBUGFUNC("e1000_update_nvm_checksum"); 1242 1243 for (i = 0; i < NVM_CHECKSUM_REG; i++) { 1244 ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data); 1245 if (ret_val) { 1246 DEBUGOUT("NVM Read Error while updating checksum.\n"); 1247 return ret_val; 1248 } 1249 checksum += nvm_data; 1250 } 1251 checksum = (u16) NVM_SUM - checksum; 1252 ret_val = hw->nvm.ops.write(hw, NVM_CHECKSUM_REG, 1, &checksum); 1253 if (ret_val) 1254 DEBUGOUT("NVM Write Error while updating checksum.\n"); 1255 1256 return ret_val; 1257 } 1258 1259 /** 1260 * e1000_reload_nvm_generic - Reloads EEPROM 1261 * @hw: pointer to the HW structure 1262 * 1263 * Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the 1264 * extended control register. 1265 **/ 1266 static void e1000_reload_nvm_generic(struct e1000_hw *hw) 1267 { 1268 u32 ctrl_ext; 1269 1270 DEBUGFUNC("e1000_reload_nvm_generic"); 1271 1272 usec_delay(10); 1273 ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); 1274 ctrl_ext |= E1000_CTRL_EXT_EE_RST; 1275 E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); 1276 E1000_WRITE_FLUSH(hw); 1277 } 1278 1279 /** 1280 * e1000_get_fw_version - Get firmware version information 1281 * @hw: pointer to the HW structure 1282 * @fw_vers: pointer to output version structure 1283 * 1284 * unsupported/not present features return 0 in version structure 1285 **/ 1286 void e1000_get_fw_version(struct e1000_hw *hw, struct e1000_fw_version *fw_vers) 1287 { 1288 u16 eeprom_verh, eeprom_verl, etrack_test, fw_version; 1289 u8 q, hval, rem, result; 1290 u16 comb_verh, comb_verl, comb_offset; 1291 1292 memset(fw_vers, 0, sizeof(struct e1000_fw_version)); 1293 1294 /* basic eeprom version numbers, bits used vary by part and by tool 1295 * used to create the nvm images */ 1296 /* Check which data format we have */ 1297 switch (hw->mac.type) { 1298 case e1000_i211: 1299 e1000_read_invm_version(hw, fw_vers); 1300 return; 1301 case e1000_82575: 1302 case e1000_82576: 1303 case e1000_82580: 1304 case e1000_i354: 1305 hw->nvm.ops.read(hw, NVM_ETRACK_HIWORD, 1, &etrack_test); 1306 /* Use this format, unless EETRACK ID exists, 1307 * then use alternate format 1308 */ 1309 if ((etrack_test & NVM_MAJOR_MASK) != NVM_ETRACK_VALID) { 1310 hw->nvm.ops.read(hw, NVM_VERSION, 1, &fw_version); 1311 fw_vers->eep_major = (fw_version & NVM_MAJOR_MASK) 1312 >> NVM_MAJOR_SHIFT; 1313 fw_vers->eep_minor = (fw_version & NVM_MINOR_MASK) 1314 >> NVM_MINOR_SHIFT; 1315 fw_vers->eep_build = (fw_version & NVM_IMAGE_ID_MASK); 1316 goto etrack_id; 1317 } 1318 break; 1319 case e1000_i210: 1320 if (!(e1000_get_flash_presence_i210(hw))) { 1321 e1000_read_invm_version(hw, fw_vers); 1322 return; 1323 } 1324 /* fall through */ 1325 case e1000_i350: 1326 hw->nvm.ops.read(hw, NVM_ETRACK_HIWORD, 1, &etrack_test); 1327 /* find combo image version */ 1328 hw->nvm.ops.read(hw, NVM_COMB_VER_PTR, 1, &comb_offset); 1329 if ((comb_offset != 0x0) && 1330 (comb_offset != NVM_VER_INVALID)) { 1331 1332 hw->nvm.ops.read(hw, (NVM_COMB_VER_OFF + comb_offset 1333 + 1), 1, &comb_verh); 1334 hw->nvm.ops.read(hw, (NVM_COMB_VER_OFF + comb_offset), 1335 1, &comb_verl); 1336 1337 /* get Option Rom version if it exists and is valid */ 1338 if ((comb_verh && comb_verl) && 1339 ((comb_verh != NVM_VER_INVALID) && 1340 (comb_verl != NVM_VER_INVALID))) { 1341 1342 fw_vers->or_valid = true; 1343 fw_vers->or_major = 1344 comb_verl >> NVM_COMB_VER_SHFT; 1345 fw_vers->or_build = 1346 (comb_verl << NVM_COMB_VER_SHFT) 1347 | (comb_verh >> NVM_COMB_VER_SHFT); 1348 fw_vers->or_patch = 1349 comb_verh & NVM_COMB_VER_MASK; 1350 } 1351 } 1352 break; 1353 default: 1354 hw->nvm.ops.read(hw, NVM_ETRACK_HIWORD, 1, &etrack_test); 1355 return; 1356 } 1357 hw->nvm.ops.read(hw, NVM_VERSION, 1, &fw_version); 1358 fw_vers->eep_major = (fw_version & NVM_MAJOR_MASK) 1359 >> NVM_MAJOR_SHIFT; 1360 1361 /* check for old style version format in newer images*/ 1362 if ((fw_version & NVM_NEW_DEC_MASK) == 0x0) { 1363 eeprom_verl = (fw_version & NVM_COMB_VER_MASK); 1364 } else { 1365 eeprom_verl = (fw_version & NVM_MINOR_MASK) 1366 >> NVM_MINOR_SHIFT; 1367 } 1368 /* Convert minor value to hex before assigning to output struct 1369 * Val to be converted will not be higher than 99, per tool output 1370 */ 1371 q = eeprom_verl / NVM_HEX_CONV; 1372 hval = q * NVM_HEX_TENS; 1373 rem = eeprom_verl % NVM_HEX_CONV; 1374 result = hval + rem; 1375 fw_vers->eep_minor = result; 1376 1377 etrack_id: 1378 if ((etrack_test & NVM_MAJOR_MASK) == NVM_ETRACK_VALID) { 1379 hw->nvm.ops.read(hw, NVM_ETRACK_WORD, 1, &eeprom_verl); 1380 hw->nvm.ops.read(hw, (NVM_ETRACK_WORD + 1), 1, &eeprom_verh); 1381 fw_vers->etrack_id = (eeprom_verh << NVM_ETRACK_SHIFT) 1382 | eeprom_verl; 1383 } else if ((etrack_test & NVM_ETRACK_VALID) == 0) { 1384 hw->nvm.ops.read(hw, NVM_ETRACK_WORD, 1, &eeprom_verh); 1385 hw->nvm.ops.read(hw, (NVM_ETRACK_WORD + 1), 1, &eeprom_verl); 1386 fw_vers->etrack_id = (eeprom_verh << NVM_ETRACK_SHIFT) | 1387 eeprom_verl; 1388 } 1389 } 1390 1391 1392