1 /****************************************************************************** 2 3 Copyright (c) 2001-2013, Intel Corporation 4 All rights reserved. 5 6 Redistribution and use in source and binary forms, with or without 7 modification, are permitted provided that the following conditions are met: 8 9 1. Redistributions of source code must retain the above copyright notice, 10 this list of conditions and the following disclaimer. 11 12 2. Redistributions in binary form must reproduce the above copyright 13 notice, this list of conditions and the following disclaimer in the 14 documentation and/or other materials provided with the distribution. 15 16 3. Neither the name of the Intel Corporation nor the names of its 17 contributors may be used to endorse or promote products derived from 18 this software without specific prior written permission. 19 20 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 21 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 24 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 POSSIBILITY OF SUCH DAMAGE. 31 32 ******************************************************************************/ 33 /*$FreeBSD$*/ 34 35 /* 82562G 10/100 Network Connection 36 * 82562G-2 10/100 Network Connection 37 * 82562GT 10/100 Network Connection 38 * 82562GT-2 10/100 Network Connection 39 * 82562V 10/100 Network Connection 40 * 82562V-2 10/100 Network Connection 41 * 82566DC-2 Gigabit Network Connection 42 * 82566DC Gigabit Network Connection 43 * 82566DM-2 Gigabit Network Connection 44 * 82566DM Gigabit Network Connection 45 * 82566MC Gigabit Network Connection 46 * 82566MM Gigabit Network Connection 47 * 82567LM Gigabit Network Connection 48 * 82567LF Gigabit Network Connection 49 * 82567V Gigabit Network Connection 50 * 82567LM-2 Gigabit Network Connection 51 * 82567LF-2 Gigabit Network Connection 52 * 82567V-2 Gigabit Network Connection 53 * 82567LF-3 Gigabit Network Connection 54 * 82567LM-3 Gigabit Network Connection 55 * 82567LM-4 Gigabit Network Connection 56 * 82577LM Gigabit Network Connection 57 * 82577LC Gigabit Network Connection 58 * 82578DM Gigabit Network Connection 59 * 82578DC Gigabit Network Connection 60 * 82579LM Gigabit Network Connection 61 * 82579V Gigabit Network Connection 62 * Ethernet Connection I217-LM 63 * Ethernet Connection I217-V 64 * Ethernet Connection I218-V 65 * Ethernet Connection I218-LM 66 */ 67 68 #include "e1000_api.h" 69 70 static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw); 71 static void e1000_release_swflag_ich8lan(struct e1000_hw *hw); 72 static s32 e1000_acquire_nvm_ich8lan(struct e1000_hw *hw); 73 static void e1000_release_nvm_ich8lan(struct e1000_hw *hw); 74 static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw); 75 static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw); 76 static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index); 77 static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index); 78 static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw); 79 static void e1000_update_mc_addr_list_pch2lan(struct e1000_hw *hw, 80 u8 *mc_addr_list, 81 u32 mc_addr_count); 82 static s32 e1000_check_reset_block_ich8lan(struct e1000_hw *hw); 83 static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw); 84 static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active); 85 static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, 86 bool active); 87 static s32 e1000_set_d3_lplu_state_ich8lan(struct e1000_hw *hw, 88 bool active); 89 static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, 90 u16 words, u16 *data); 91 static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, 92 u16 words, u16 *data); 93 static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw); 94 static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw); 95 static s32 e1000_valid_led_default_ich8lan(struct e1000_hw *hw, 96 u16 *data); 97 static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw); 98 static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw); 99 static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw); 100 static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw); 101 static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw); 102 static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw); 103 static s32 e1000_setup_copper_link_pch_lpt(struct e1000_hw *hw); 104 static s32 e1000_get_link_up_info_ich8lan(struct e1000_hw *hw, 105 u16 *speed, u16 *duplex); 106 static s32 e1000_cleanup_led_ich8lan(struct e1000_hw *hw); 107 static s32 e1000_led_on_ich8lan(struct e1000_hw *hw); 108 static s32 e1000_led_off_ich8lan(struct e1000_hw *hw); 109 static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link); 110 static s32 e1000_setup_led_pchlan(struct e1000_hw *hw); 111 static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw); 112 static s32 e1000_led_on_pchlan(struct e1000_hw *hw); 113 static s32 e1000_led_off_pchlan(struct e1000_hw *hw); 114 static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw); 115 static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank); 116 static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw); 117 static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw); 118 static s32 e1000_read_flash_byte_ich8lan(struct e1000_hw *hw, 119 u32 offset, u8 *data); 120 static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, 121 u8 size, u16 *data); 122 static s32 e1000_read_flash_word_ich8lan(struct e1000_hw *hw, 123 u32 offset, u16 *data); 124 static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw, 125 u32 offset, u8 byte); 126 static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw); 127 static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw); 128 static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw); 129 static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw); 130 static s32 e1000_k1_workaround_lv(struct e1000_hw *hw); 131 static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate); 132 static s32 e1000_set_obff_timer_pch_lpt(struct e1000_hw *hw, u32 itr); 133 134 /* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */ 135 /* Offset 04h HSFSTS */ 136 union ich8_hws_flash_status { 137 struct ich8_hsfsts { 138 u16 flcdone:1; /* bit 0 Flash Cycle Done */ 139 u16 flcerr:1; /* bit 1 Flash Cycle Error */ 140 u16 dael:1; /* bit 2 Direct Access error Log */ 141 u16 berasesz:2; /* bit 4:3 Sector Erase Size */ 142 u16 flcinprog:1; /* bit 5 flash cycle in Progress */ 143 u16 reserved1:2; /* bit 13:6 Reserved */ 144 u16 reserved2:6; /* bit 13:6 Reserved */ 145 u16 fldesvalid:1; /* bit 14 Flash Descriptor Valid */ 146 u16 flockdn:1; /* bit 15 Flash Config Lock-Down */ 147 } hsf_status; 148 u16 regval; 149 }; 150 151 /* ICH GbE Flash Hardware Sequencing Flash control Register bit breakdown */ 152 /* Offset 06h FLCTL */ 153 union ich8_hws_flash_ctrl { 154 struct ich8_hsflctl { 155 u16 flcgo:1; /* 0 Flash Cycle Go */ 156 u16 flcycle:2; /* 2:1 Flash Cycle */ 157 u16 reserved:5; /* 7:3 Reserved */ 158 u16 fldbcount:2; /* 9:8 Flash Data Byte Count */ 159 u16 flockdn:6; /* 15:10 Reserved */ 160 } hsf_ctrl; 161 u16 regval; 162 }; 163 164 /* ICH Flash Region Access Permissions */ 165 union ich8_hws_flash_regacc { 166 struct ich8_flracc { 167 u32 grra:8; /* 0:7 GbE region Read Access */ 168 u32 grwa:8; /* 8:15 GbE region Write Access */ 169 u32 gmrag:8; /* 23:16 GbE Master Read Access Grant */ 170 u32 gmwag:8; /* 31:24 GbE Master Write Access Grant */ 171 } hsf_flregacc; 172 u16 regval; 173 }; 174 175 /** 176 * e1000_phy_is_accessible_pchlan - Check if able to access PHY registers 177 * @hw: pointer to the HW structure 178 * 179 * Test access to the PHY registers by reading the PHY ID registers. If 180 * the PHY ID is already known (e.g. resume path) compare it with known ID, 181 * otherwise assume the read PHY ID is correct if it is valid. 182 * 183 * Assumes the sw/fw/hw semaphore is already acquired. 184 **/ 185 static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw) 186 { 187 u16 phy_reg = 0; 188 u32 phy_id = 0; 189 s32 ret_val = 0; 190 u16 retry_count; 191 u32 mac_reg = 0; 192 193 for (retry_count = 0; retry_count < 2; retry_count++) { 194 ret_val = hw->phy.ops.read_reg_locked(hw, PHY_ID1, &phy_reg); 195 if (ret_val || (phy_reg == 0xFFFF)) 196 continue; 197 phy_id = (u32)(phy_reg << 16); 198 199 ret_val = hw->phy.ops.read_reg_locked(hw, PHY_ID2, &phy_reg); 200 if (ret_val || (phy_reg == 0xFFFF)) { 201 phy_id = 0; 202 continue; 203 } 204 phy_id |= (u32)(phy_reg & PHY_REVISION_MASK); 205 break; 206 } 207 208 if (hw->phy.id) { 209 if (hw->phy.id == phy_id) 210 goto out; 211 } else if (phy_id) { 212 hw->phy.id = phy_id; 213 hw->phy.revision = (u32)(phy_reg & ~PHY_REVISION_MASK); 214 goto out; 215 } 216 217 /* In case the PHY needs to be in mdio slow mode, 218 * set slow mode and try to get the PHY id again. 219 */ 220 if (hw->mac.type < e1000_pch_lpt) { 221 hw->phy.ops.release(hw); 222 ret_val = e1000_set_mdio_slow_mode_hv(hw); 223 if (!ret_val) 224 ret_val = e1000_get_phy_id(hw); 225 hw->phy.ops.acquire(hw); 226 } 227 228 if (ret_val) 229 return FALSE; 230 out: 231 if (hw->mac.type == e1000_pch_lpt) { 232 /* Unforce SMBus mode in PHY */ 233 hw->phy.ops.read_reg_locked(hw, CV_SMB_CTRL, &phy_reg); 234 phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS; 235 hw->phy.ops.write_reg_locked(hw, CV_SMB_CTRL, phy_reg); 236 237 /* Unforce SMBus mode in MAC */ 238 mac_reg = E1000_READ_REG(hw, E1000_CTRL_EXT); 239 mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS; 240 E1000_WRITE_REG(hw, E1000_CTRL_EXT, mac_reg); 241 } 242 243 return TRUE; 244 } 245 246 /** 247 * e1000_toggle_lanphypc_pch_lpt - toggle the LANPHYPC pin value 248 * @hw: pointer to the HW structure 249 * 250 * Toggling the LANPHYPC pin value fully power-cycles the PHY and is 251 * used to reset the PHY to a quiescent state when necessary. 252 **/ 253 void e1000_toggle_lanphypc_pch_lpt(struct e1000_hw *hw) 254 { 255 u32 mac_reg; 256 257 DEBUGFUNC("e1000_toggle_lanphypc_pch_lpt"); 258 259 /* Set Phy Config Counter to 50msec */ 260 mac_reg = E1000_READ_REG(hw, E1000_FEXTNVM3); 261 mac_reg &= ~E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK; 262 mac_reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC; 263 E1000_WRITE_REG(hw, E1000_FEXTNVM3, mac_reg); 264 265 /* Toggle LANPHYPC Value bit */ 266 mac_reg = E1000_READ_REG(hw, E1000_CTRL); 267 mac_reg |= E1000_CTRL_LANPHYPC_OVERRIDE; 268 mac_reg &= ~E1000_CTRL_LANPHYPC_VALUE; 269 E1000_WRITE_REG(hw, E1000_CTRL, mac_reg); 270 E1000_WRITE_FLUSH(hw); 271 usec_delay(10); 272 mac_reg &= ~E1000_CTRL_LANPHYPC_OVERRIDE; 273 E1000_WRITE_REG(hw, E1000_CTRL, mac_reg); 274 E1000_WRITE_FLUSH(hw); 275 276 if (hw->mac.type < e1000_pch_lpt) { 277 msec_delay(50); 278 } else { 279 u16 count = 20; 280 281 do { 282 msec_delay(5); 283 } while (!(E1000_READ_REG(hw, E1000_CTRL_EXT) & 284 E1000_CTRL_EXT_LPCD) && count--); 285 286 msec_delay(30); 287 } 288 } 289 290 /** 291 * e1000_init_phy_workarounds_pchlan - PHY initialization workarounds 292 * @hw: pointer to the HW structure 293 * 294 * Workarounds/flow necessary for PHY initialization during driver load 295 * and resume paths. 296 **/ 297 static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) 298 { 299 u32 mac_reg, fwsm = E1000_READ_REG(hw, E1000_FWSM); 300 s32 ret_val; 301 302 DEBUGFUNC("e1000_init_phy_workarounds_pchlan"); 303 304 /* Gate automatic PHY configuration by hardware on managed and 305 * non-managed 82579 and newer adapters. 306 */ 307 e1000_gate_hw_phy_config_ich8lan(hw, TRUE); 308 309 ret_val = hw->phy.ops.acquire(hw); 310 if (ret_val) { 311 DEBUGOUT("Failed to initialize PHY flow\n"); 312 goto out; 313 } 314 315 /* The MAC-PHY interconnect may be in SMBus mode. If the PHY is 316 * inaccessible and resetting the PHY is not blocked, toggle the 317 * LANPHYPC Value bit to force the interconnect to PCIe mode. 318 */ 319 switch (hw->mac.type) { 320 case e1000_pch_lpt: 321 if (e1000_phy_is_accessible_pchlan(hw)) 322 break; 323 324 /* Before toggling LANPHYPC, see if PHY is accessible by 325 * forcing MAC to SMBus mode first. 326 */ 327 mac_reg = E1000_READ_REG(hw, E1000_CTRL_EXT); 328 mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS; 329 E1000_WRITE_REG(hw, E1000_CTRL_EXT, mac_reg); 330 331 /* Wait 50 milliseconds for MAC to finish any retries 332 * that it might be trying to perform from previous 333 * attempts to acknowledge any phy read requests. 334 */ 335 msec_delay(50); 336 337 /* fall-through */ 338 case e1000_pch2lan: 339 if (e1000_phy_is_accessible_pchlan(hw)) 340 break; 341 342 /* fall-through */ 343 case e1000_pchlan: 344 if ((hw->mac.type == e1000_pchlan) && 345 (fwsm & E1000_ICH_FWSM_FW_VALID)) 346 break; 347 348 if (hw->phy.ops.check_reset_block(hw)) { 349 DEBUGOUT("Required LANPHYPC toggle blocked by ME\n"); 350 ret_val = -E1000_ERR_PHY; 351 break; 352 } 353 354 /* Toggle LANPHYPC Value bit */ 355 e1000_toggle_lanphypc_pch_lpt(hw); 356 if (hw->mac.type >= e1000_pch_lpt) { 357 if (e1000_phy_is_accessible_pchlan(hw)) 358 break; 359 360 /* Toggling LANPHYPC brings the PHY out of SMBus mode 361 * so ensure that the MAC is also out of SMBus mode 362 */ 363 mac_reg = E1000_READ_REG(hw, E1000_CTRL_EXT); 364 mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS; 365 E1000_WRITE_REG(hw, E1000_CTRL_EXT, mac_reg); 366 367 if (e1000_phy_is_accessible_pchlan(hw)) 368 break; 369 370 ret_val = -E1000_ERR_PHY; 371 } 372 break; 373 default: 374 break; 375 } 376 377 hw->phy.ops.release(hw); 378 if (!ret_val) { 379 380 /* Check to see if able to reset PHY. Print error if not */ 381 if (hw->phy.ops.check_reset_block(hw)) { 382 ERROR_REPORT("Reset blocked by ME\n"); 383 goto out; 384 } 385 386 /* Reset the PHY before any access to it. Doing so, ensures 387 * that the PHY is in a known good state before we read/write 388 * PHY registers. The generic reset is sufficient here, 389 * because we haven't determined the PHY type yet. 390 */ 391 ret_val = e1000_phy_hw_reset_generic(hw); 392 if (ret_val) 393 goto out; 394 395 /* On a successful reset, possibly need to wait for the PHY 396 * to quiesce to an accessible state before returning control 397 * to the calling function. If the PHY does not quiesce, then 398 * return E1000E_BLK_PHY_RESET, as this is the condition that 399 * the PHY is in. 400 */ 401 ret_val = hw->phy.ops.check_reset_block(hw); 402 if (ret_val) 403 ERROR_REPORT("ME blocked access to PHY after reset\n"); 404 } 405 406 out: 407 /* Ungate automatic PHY configuration on non-managed 82579 */ 408 if ((hw->mac.type == e1000_pch2lan) && 409 !(fwsm & E1000_ICH_FWSM_FW_VALID)) { 410 msec_delay(10); 411 e1000_gate_hw_phy_config_ich8lan(hw, FALSE); 412 } 413 414 return ret_val; 415 } 416 417 /** 418 * e1000_init_phy_params_pchlan - Initialize PHY function pointers 419 * @hw: pointer to the HW structure 420 * 421 * Initialize family-specific PHY parameters and function pointers. 422 **/ 423 static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) 424 { 425 struct e1000_phy_info *phy = &hw->phy; 426 s32 ret_val; 427 428 DEBUGFUNC("e1000_init_phy_params_pchlan"); 429 430 phy->addr = 1; 431 phy->reset_delay_us = 100; 432 433 phy->ops.acquire = e1000_acquire_swflag_ich8lan; 434 phy->ops.check_reset_block = e1000_check_reset_block_ich8lan; 435 phy->ops.get_cfg_done = e1000_get_cfg_done_ich8lan; 436 phy->ops.set_page = e1000_set_page_igp; 437 phy->ops.read_reg = e1000_read_phy_reg_hv; 438 phy->ops.read_reg_locked = e1000_read_phy_reg_hv_locked; 439 phy->ops.read_reg_page = e1000_read_phy_reg_page_hv; 440 phy->ops.release = e1000_release_swflag_ich8lan; 441 phy->ops.reset = e1000_phy_hw_reset_ich8lan; 442 phy->ops.set_d0_lplu_state = e1000_set_lplu_state_pchlan; 443 phy->ops.set_d3_lplu_state = e1000_set_lplu_state_pchlan; 444 phy->ops.write_reg = e1000_write_phy_reg_hv; 445 phy->ops.write_reg_locked = e1000_write_phy_reg_hv_locked; 446 phy->ops.write_reg_page = e1000_write_phy_reg_page_hv; 447 phy->ops.power_up = e1000_power_up_phy_copper; 448 phy->ops.power_down = e1000_power_down_phy_copper_ich8lan; 449 phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; 450 451 phy->id = e1000_phy_unknown; 452 453 ret_val = e1000_init_phy_workarounds_pchlan(hw); 454 if (ret_val) 455 return ret_val; 456 457 if (phy->id == e1000_phy_unknown) 458 switch (hw->mac.type) { 459 default: 460 ret_val = e1000_get_phy_id(hw); 461 if (ret_val) 462 return ret_val; 463 if ((phy->id != 0) && (phy->id != PHY_REVISION_MASK)) 464 break; 465 /* fall-through */ 466 case e1000_pch2lan: 467 case e1000_pch_lpt: 468 /* In case the PHY needs to be in mdio slow mode, 469 * set slow mode and try to get the PHY id again. 470 */ 471 ret_val = e1000_set_mdio_slow_mode_hv(hw); 472 if (ret_val) 473 return ret_val; 474 ret_val = e1000_get_phy_id(hw); 475 if (ret_val) 476 return ret_val; 477 break; 478 } 479 phy->type = e1000_get_phy_type_from_id(phy->id); 480 481 switch (phy->type) { 482 case e1000_phy_82577: 483 case e1000_phy_82579: 484 case e1000_phy_i217: 485 phy->ops.check_polarity = e1000_check_polarity_82577; 486 phy->ops.force_speed_duplex = 487 e1000_phy_force_speed_duplex_82577; 488 phy->ops.get_cable_length = e1000_get_cable_length_82577; 489 phy->ops.get_info = e1000_get_phy_info_82577; 490 phy->ops.commit = e1000_phy_sw_reset_generic; 491 break; 492 case e1000_phy_82578: 493 phy->ops.check_polarity = e1000_check_polarity_m88; 494 phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_m88; 495 phy->ops.get_cable_length = e1000_get_cable_length_m88; 496 phy->ops.get_info = e1000_get_phy_info_m88; 497 break; 498 default: 499 ret_val = -E1000_ERR_PHY; 500 break; 501 } 502 503 return ret_val; 504 } 505 506 /** 507 * e1000_init_phy_params_ich8lan - Initialize PHY function pointers 508 * @hw: pointer to the HW structure 509 * 510 * Initialize family-specific PHY parameters and function pointers. 511 **/ 512 static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw) 513 { 514 struct e1000_phy_info *phy = &hw->phy; 515 s32 ret_val; 516 u16 i = 0; 517 518 DEBUGFUNC("e1000_init_phy_params_ich8lan"); 519 520 phy->addr = 1; 521 phy->reset_delay_us = 100; 522 523 phy->ops.acquire = e1000_acquire_swflag_ich8lan; 524 phy->ops.check_reset_block = e1000_check_reset_block_ich8lan; 525 phy->ops.get_cable_length = e1000_get_cable_length_igp_2; 526 phy->ops.get_cfg_done = e1000_get_cfg_done_ich8lan; 527 phy->ops.read_reg = e1000_read_phy_reg_igp; 528 phy->ops.release = e1000_release_swflag_ich8lan; 529 phy->ops.reset = e1000_phy_hw_reset_ich8lan; 530 phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_ich8lan; 531 phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_ich8lan; 532 phy->ops.write_reg = e1000_write_phy_reg_igp; 533 phy->ops.power_up = e1000_power_up_phy_copper; 534 phy->ops.power_down = e1000_power_down_phy_copper_ich8lan; 535 536 /* We may need to do this twice - once for IGP and if that fails, 537 * we'll set BM func pointers and try again 538 */ 539 ret_val = e1000_determine_phy_address(hw); 540 if (ret_val) { 541 phy->ops.write_reg = e1000_write_phy_reg_bm; 542 phy->ops.read_reg = e1000_read_phy_reg_bm; 543 ret_val = e1000_determine_phy_address(hw); 544 if (ret_val) { 545 DEBUGOUT("Cannot determine PHY addr. Erroring out\n"); 546 return ret_val; 547 } 548 } 549 550 phy->id = 0; 551 while ((e1000_phy_unknown == e1000_get_phy_type_from_id(phy->id)) && 552 (i++ < 100)) { 553 msec_delay(1); 554 ret_val = e1000_get_phy_id(hw); 555 if (ret_val) 556 return ret_val; 557 } 558 559 /* Verify phy id */ 560 switch (phy->id) { 561 case IGP03E1000_E_PHY_ID: 562 phy->type = e1000_phy_igp_3; 563 phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; 564 phy->ops.read_reg_locked = e1000_read_phy_reg_igp_locked; 565 phy->ops.write_reg_locked = e1000_write_phy_reg_igp_locked; 566 phy->ops.get_info = e1000_get_phy_info_igp; 567 phy->ops.check_polarity = e1000_check_polarity_igp; 568 phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_igp; 569 break; 570 case IFE_E_PHY_ID: 571 case IFE_PLUS_E_PHY_ID: 572 case IFE_C_E_PHY_ID: 573 phy->type = e1000_phy_ife; 574 phy->autoneg_mask = E1000_ALL_NOT_GIG; 575 phy->ops.get_info = e1000_get_phy_info_ife; 576 phy->ops.check_polarity = e1000_check_polarity_ife; 577 phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_ife; 578 break; 579 case BME1000_E_PHY_ID: 580 phy->type = e1000_phy_bm; 581 phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; 582 phy->ops.read_reg = e1000_read_phy_reg_bm; 583 phy->ops.write_reg = e1000_write_phy_reg_bm; 584 phy->ops.commit = e1000_phy_sw_reset_generic; 585 phy->ops.get_info = e1000_get_phy_info_m88; 586 phy->ops.check_polarity = e1000_check_polarity_m88; 587 phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_m88; 588 break; 589 default: 590 return -E1000_ERR_PHY; 591 break; 592 } 593 594 return E1000_SUCCESS; 595 } 596 597 /** 598 * e1000_init_nvm_params_ich8lan - Initialize NVM function pointers 599 * @hw: pointer to the HW structure 600 * 601 * Initialize family-specific NVM parameters and function 602 * pointers. 603 **/ 604 static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw) 605 { 606 struct e1000_nvm_info *nvm = &hw->nvm; 607 struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; 608 u32 gfpreg, sector_base_addr, sector_end_addr; 609 u16 i; 610 611 DEBUGFUNC("e1000_init_nvm_params_ich8lan"); 612 613 /* Can't read flash registers if the register set isn't mapped. */ 614 if (!hw->flash_address) { 615 DEBUGOUT("ERROR: Flash registers not mapped\n"); 616 return -E1000_ERR_CONFIG; 617 } 618 619 nvm->type = e1000_nvm_flash_sw; 620 621 gfpreg = E1000_READ_FLASH_REG(hw, ICH_FLASH_GFPREG); 622 623 /* sector_X_addr is a "sector"-aligned address (4096 bytes) 624 * Add 1 to sector_end_addr since this sector is included in 625 * the overall size. 626 */ 627 sector_base_addr = gfpreg & FLASH_GFPREG_BASE_MASK; 628 sector_end_addr = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK) + 1; 629 630 /* flash_base_addr is byte-aligned */ 631 nvm->flash_base_addr = sector_base_addr << FLASH_SECTOR_ADDR_SHIFT; 632 633 /* find total size of the NVM, then cut in half since the total 634 * size represents two separate NVM banks. 635 */ 636 nvm->flash_bank_size = ((sector_end_addr - sector_base_addr) 637 << FLASH_SECTOR_ADDR_SHIFT); 638 nvm->flash_bank_size /= 2; 639 /* Adjust to word count */ 640 nvm->flash_bank_size /= sizeof(u16); 641 642 nvm->word_size = E1000_SHADOW_RAM_WORDS; 643 644 /* Clear shadow ram */ 645 for (i = 0; i < nvm->word_size; i++) { 646 dev_spec->shadow_ram[i].modified = FALSE; 647 dev_spec->shadow_ram[i].value = 0xFFFF; 648 } 649 650 E1000_MUTEX_INIT(&dev_spec->nvm_mutex); 651 E1000_MUTEX_INIT(&dev_spec->swflag_mutex); 652 653 /* Function Pointers */ 654 nvm->ops.acquire = e1000_acquire_nvm_ich8lan; 655 nvm->ops.release = e1000_release_nvm_ich8lan; 656 nvm->ops.read = e1000_read_nvm_ich8lan; 657 nvm->ops.update = e1000_update_nvm_checksum_ich8lan; 658 nvm->ops.valid_led_default = e1000_valid_led_default_ich8lan; 659 nvm->ops.validate = e1000_validate_nvm_checksum_ich8lan; 660 nvm->ops.write = e1000_write_nvm_ich8lan; 661 662 return E1000_SUCCESS; 663 } 664 665 /** 666 * e1000_init_mac_params_ich8lan - Initialize MAC function pointers 667 * @hw: pointer to the HW structure 668 * 669 * Initialize family-specific MAC parameters and function 670 * pointers. 671 **/ 672 static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw) 673 { 674 struct e1000_mac_info *mac = &hw->mac; 675 676 DEBUGFUNC("e1000_init_mac_params_ich8lan"); 677 678 /* Set media type function pointer */ 679 hw->phy.media_type = e1000_media_type_copper; 680 681 /* Set mta register count */ 682 mac->mta_reg_count = 32; 683 /* Set rar entry count */ 684 mac->rar_entry_count = E1000_ICH_RAR_ENTRIES; 685 if (mac->type == e1000_ich8lan) 686 mac->rar_entry_count--; 687 /* Set if part includes ASF firmware */ 688 mac->asf_firmware_present = TRUE; 689 /* FWSM register */ 690 mac->has_fwsm = TRUE; 691 /* ARC subsystem not supported */ 692 mac->arc_subsystem_valid = FALSE; 693 /* Adaptive IFS supported */ 694 mac->adaptive_ifs = TRUE; 695 696 /* Function pointers */ 697 698 /* bus type/speed/width */ 699 mac->ops.get_bus_info = e1000_get_bus_info_ich8lan; 700 /* function id */ 701 mac->ops.set_lan_id = e1000_set_lan_id_single_port; 702 /* reset */ 703 mac->ops.reset_hw = e1000_reset_hw_ich8lan; 704 /* hw initialization */ 705 mac->ops.init_hw = e1000_init_hw_ich8lan; 706 /* link setup */ 707 mac->ops.setup_link = e1000_setup_link_ich8lan; 708 /* physical interface setup */ 709 mac->ops.setup_physical_interface = e1000_setup_copper_link_ich8lan; 710 /* check for link */ 711 mac->ops.check_for_link = e1000_check_for_copper_link_ich8lan; 712 /* link info */ 713 mac->ops.get_link_up_info = e1000_get_link_up_info_ich8lan; 714 /* multicast address update */ 715 mac->ops.update_mc_addr_list = e1000_update_mc_addr_list_generic; 716 /* clear hardware counters */ 717 mac->ops.clear_hw_cntrs = e1000_clear_hw_cntrs_ich8lan; 718 719 /* LED and other operations */ 720 switch (mac->type) { 721 case e1000_ich8lan: 722 case e1000_ich9lan: 723 case e1000_ich10lan: 724 /* check management mode */ 725 mac->ops.check_mng_mode = e1000_check_mng_mode_ich8lan; 726 /* ID LED init */ 727 mac->ops.id_led_init = e1000_id_led_init_generic; 728 /* blink LED */ 729 mac->ops.blink_led = e1000_blink_led_generic; 730 /* setup LED */ 731 mac->ops.setup_led = e1000_setup_led_generic; 732 /* cleanup LED */ 733 mac->ops.cleanup_led = e1000_cleanup_led_ich8lan; 734 /* turn on/off LED */ 735 mac->ops.led_on = e1000_led_on_ich8lan; 736 mac->ops.led_off = e1000_led_off_ich8lan; 737 break; 738 case e1000_pch2lan: 739 mac->rar_entry_count = E1000_PCH2_RAR_ENTRIES; 740 mac->ops.rar_set = e1000_rar_set_pch2lan; 741 /* fall-through */ 742 case e1000_pch_lpt: 743 /* multicast address update for pch2 */ 744 mac->ops.update_mc_addr_list = 745 e1000_update_mc_addr_list_pch2lan; 746 case e1000_pchlan: 747 /* check management mode */ 748 mac->ops.check_mng_mode = e1000_check_mng_mode_pchlan; 749 /* ID LED init */ 750 mac->ops.id_led_init = e1000_id_led_init_pchlan; 751 /* setup LED */ 752 mac->ops.setup_led = e1000_setup_led_pchlan; 753 /* cleanup LED */ 754 mac->ops.cleanup_led = e1000_cleanup_led_pchlan; 755 /* turn on/off LED */ 756 mac->ops.led_on = e1000_led_on_pchlan; 757 mac->ops.led_off = e1000_led_off_pchlan; 758 break; 759 default: 760 break; 761 } 762 763 if (mac->type == e1000_pch_lpt) { 764 mac->rar_entry_count = E1000_PCH_LPT_RAR_ENTRIES; 765 mac->ops.rar_set = e1000_rar_set_pch_lpt; 766 mac->ops.setup_physical_interface = e1000_setup_copper_link_pch_lpt; 767 mac->ops.set_obff_timer = e1000_set_obff_timer_pch_lpt; 768 } 769 770 /* Enable PCS Lock-loss workaround for ICH8 */ 771 if (mac->type == e1000_ich8lan) 772 e1000_set_kmrn_lock_loss_workaround_ich8lan(hw, TRUE); 773 774 return E1000_SUCCESS; 775 } 776 777 /** 778 * __e1000_access_emi_reg_locked - Read/write EMI register 779 * @hw: pointer to the HW structure 780 * @addr: EMI address to program 781 * @data: pointer to value to read/write from/to the EMI address 782 * @read: boolean flag to indicate read or write 783 * 784 * This helper function assumes the SW/FW/HW Semaphore is already acquired. 785 **/ 786 static s32 __e1000_access_emi_reg_locked(struct e1000_hw *hw, u16 address, 787 u16 *data, bool read) 788 { 789 s32 ret_val; 790 791 DEBUGFUNC("__e1000_access_emi_reg_locked"); 792 793 ret_val = hw->phy.ops.write_reg_locked(hw, I82579_EMI_ADDR, address); 794 if (ret_val) 795 return ret_val; 796 797 if (read) 798 ret_val = hw->phy.ops.read_reg_locked(hw, I82579_EMI_DATA, 799 data); 800 else 801 ret_val = hw->phy.ops.write_reg_locked(hw, I82579_EMI_DATA, 802 *data); 803 804 return ret_val; 805 } 806 807 /** 808 * e1000_read_emi_reg_locked - Read Extended Management Interface register 809 * @hw: pointer to the HW structure 810 * @addr: EMI address to program 811 * @data: value to be read from the EMI address 812 * 813 * Assumes the SW/FW/HW Semaphore is already acquired. 814 **/ 815 s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data) 816 { 817 DEBUGFUNC("e1000_read_emi_reg_locked"); 818 819 return __e1000_access_emi_reg_locked(hw, addr, data, TRUE); 820 } 821 822 /** 823 * e1000_write_emi_reg_locked - Write Extended Management Interface register 824 * @hw: pointer to the HW structure 825 * @addr: EMI address to program 826 * @data: value to be written to the EMI address 827 * 828 * Assumes the SW/FW/HW Semaphore is already acquired. 829 **/ 830 s32 e1000_write_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 data) 831 { 832 DEBUGFUNC("e1000_read_emi_reg_locked"); 833 834 return __e1000_access_emi_reg_locked(hw, addr, &data, FALSE); 835 } 836 837 /** 838 * e1000_set_eee_pchlan - Enable/disable EEE support 839 * @hw: pointer to the HW structure 840 * 841 * Enable/disable EEE based on setting in dev_spec structure, the duplex of 842 * the link and the EEE capabilities of the link partner. The LPI Control 843 * register bits will remain set only if/when link is up. 844 * 845 * EEE LPI must not be asserted earlier than one second after link is up. 846 * On 82579, EEE LPI should not be enabled until such time otherwise there 847 * can be link issues with some switches. Other devices can have EEE LPI 848 * enabled immediately upon link up since they have a timer in hardware which 849 * prevents LPI from being asserted too early. 850 **/ 851 s32 e1000_set_eee_pchlan(struct e1000_hw *hw) 852 { 853 struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; 854 s32 ret_val; 855 u16 lpa, pcs_status, adv, adv_addr, lpi_ctrl, data; 856 857 DEBUGFUNC("e1000_set_eee_pchlan"); 858 859 switch (hw->phy.type) { 860 case e1000_phy_82579: 861 lpa = I82579_EEE_LP_ABILITY; 862 pcs_status = I82579_EEE_PCS_STATUS; 863 adv_addr = I82579_EEE_ADVERTISEMENT; 864 break; 865 case e1000_phy_i217: 866 lpa = I217_EEE_LP_ABILITY; 867 pcs_status = I217_EEE_PCS_STATUS; 868 adv_addr = I217_EEE_ADVERTISEMENT; 869 break; 870 default: 871 return E1000_SUCCESS; 872 } 873 874 ret_val = hw->phy.ops.acquire(hw); 875 if (ret_val) 876 return ret_val; 877 878 ret_val = hw->phy.ops.read_reg_locked(hw, I82579_LPI_CTRL, &lpi_ctrl); 879 if (ret_val) 880 goto release; 881 882 /* Clear bits that enable EEE in various speeds */ 883 lpi_ctrl &= ~I82579_LPI_CTRL_ENABLE_MASK; 884 885 /* Enable EEE if not disabled by user */ 886 if (!dev_spec->eee_disable) { 887 /* Save off link partner's EEE ability */ 888 ret_val = e1000_read_emi_reg_locked(hw, lpa, 889 &dev_spec->eee_lp_ability); 890 if (ret_val) 891 goto release; 892 893 /* Read EEE advertisement */ 894 ret_val = e1000_read_emi_reg_locked(hw, adv_addr, &adv); 895 if (ret_val) 896 goto release; 897 898 /* Enable EEE only for speeds in which the link partner is 899 * EEE capable and for which we advertise EEE. 900 */ 901 if (adv & dev_spec->eee_lp_ability & I82579_EEE_1000_SUPPORTED) 902 lpi_ctrl |= I82579_LPI_CTRL_1000_ENABLE; 903 904 if (adv & dev_spec->eee_lp_ability & I82579_EEE_100_SUPPORTED) { 905 hw->phy.ops.read_reg_locked(hw, PHY_LP_ABILITY, &data); 906 if (data & NWAY_LPAR_100TX_FD_CAPS) 907 lpi_ctrl |= I82579_LPI_CTRL_100_ENABLE; 908 else 909 /* EEE is not supported in 100Half, so ignore 910 * partner's EEE in 100 ability if full-duplex 911 * is not advertised. 912 */ 913 dev_spec->eee_lp_ability &= 914 ~I82579_EEE_100_SUPPORTED; 915 } 916 } 917 918 /* R/Clr IEEE MMD 3.1 bits 11:10 - Tx/Rx LPI Received */ 919 ret_val = e1000_read_emi_reg_locked(hw, pcs_status, &data); 920 if (ret_val) 921 goto release; 922 923 ret_val = hw->phy.ops.write_reg_locked(hw, I82579_LPI_CTRL, lpi_ctrl); 924 release: 925 hw->phy.ops.release(hw); 926 927 return ret_val; 928 } 929 930 /** 931 * e1000_k1_workaround_lpt_lp - K1 workaround on Lynxpoint-LP 932 * @hw: pointer to the HW structure 933 * @link: link up bool flag 934 * 935 * When K1 is enabled for 1Gbps, the MAC can miss 2 DMA completion indications 936 * preventing further DMA write requests. Workaround the issue by disabling 937 * the de-assertion of the clock request when in 1Gpbs mode. 938 * Also, set appropriate Tx re-transmission timeouts for 10 and 100Half link 939 * speeds in order to avoid Tx hangs. 940 **/ 941 static s32 e1000_k1_workaround_lpt_lp(struct e1000_hw *hw, bool link) 942 { 943 u32 fextnvm6 = E1000_READ_REG(hw, E1000_FEXTNVM6); 944 u32 status = E1000_READ_REG(hw, E1000_STATUS); 945 s32 ret_val = E1000_SUCCESS; 946 u16 reg; 947 948 if (link && (status & E1000_STATUS_SPEED_1000)) { 949 ret_val = hw->phy.ops.acquire(hw); 950 if (ret_val) 951 return ret_val; 952 953 ret_val = 954 e1000_read_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG, 955 ®); 956 if (ret_val) 957 goto release; 958 959 ret_val = 960 e1000_write_kmrn_reg_locked(hw, 961 E1000_KMRNCTRLSTA_K1_CONFIG, 962 reg & 963 ~E1000_KMRNCTRLSTA_K1_ENABLE); 964 if (ret_val) 965 goto release; 966 967 usec_delay(10); 968 969 E1000_WRITE_REG(hw, E1000_FEXTNVM6, 970 fextnvm6 | E1000_FEXTNVM6_REQ_PLL_CLK); 971 972 ret_val = 973 e1000_write_kmrn_reg_locked(hw, 974 E1000_KMRNCTRLSTA_K1_CONFIG, 975 reg); 976 release: 977 hw->phy.ops.release(hw); 978 } else { 979 /* clear FEXTNVM6 bit 8 on link down or 10/100 */ 980 fextnvm6 &= ~E1000_FEXTNVM6_REQ_PLL_CLK; 981 982 if (!link || ((status & E1000_STATUS_SPEED_100) && 983 (status & E1000_STATUS_FD))) 984 goto update_fextnvm6; 985 986 ret_val = hw->phy.ops.read_reg(hw, I217_INBAND_CTRL, ®); 987 if (ret_val) 988 return ret_val; 989 990 /* Clear link status transmit timeout */ 991 reg &= ~I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_MASK; 992 993 if (status & E1000_STATUS_SPEED_100) { 994 /* Set inband Tx timeout to 5x10us for 100Half */ 995 reg |= 5 << I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_SHIFT; 996 997 /* Do not extend the K1 entry latency for 100Half */ 998 fextnvm6 &= ~E1000_FEXTNVM6_ENABLE_K1_ENTRY_CONDITION; 999 } else { 1000 /* Set inband Tx timeout to 50x10us for 10Full/Half */ 1001 reg |= 50 << 1002 I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_SHIFT; 1003 1004 /* Extend the K1 entry latency for 10 Mbps */ 1005 fextnvm6 |= E1000_FEXTNVM6_ENABLE_K1_ENTRY_CONDITION; 1006 } 1007 1008 ret_val = hw->phy.ops.write_reg(hw, I217_INBAND_CTRL, reg); 1009 if (ret_val) 1010 return ret_val; 1011 1012 update_fextnvm6: 1013 E1000_WRITE_REG(hw, E1000_FEXTNVM6, fextnvm6); 1014 } 1015 1016 return ret_val; 1017 } 1018 1019 static u64 e1000_ltr2ns(u16 ltr) 1020 { 1021 u32 value, scale; 1022 1023 /* Determine the latency in nsec based on the LTR value & scale */ 1024 value = ltr & E1000_LTRV_VALUE_MASK; 1025 scale = (ltr & E1000_LTRV_SCALE_MASK) >> E1000_LTRV_SCALE_SHIFT; 1026 1027 return value * (1 << (scale * E1000_LTRV_SCALE_FACTOR)); 1028 } 1029 1030 /** 1031 * e1000_platform_pm_pch_lpt - Set platform power management values 1032 * @hw: pointer to the HW structure 1033 * @link: bool indicating link status 1034 * 1035 * Set the Latency Tolerance Reporting (LTR) values for the "PCIe-like" 1036 * GbE MAC in the Lynx Point PCH based on Rx buffer size and link speed 1037 * when link is up (which must not exceed the maximum latency supported 1038 * by the platform), otherwise specify there is no LTR requirement. 1039 * Unlike TRUE-PCIe devices which set the LTR maximum snoop/no-snoop 1040 * latencies in the LTR Extended Capability Structure in the PCIe Extended 1041 * Capability register set, on this device LTR is set by writing the 1042 * equivalent snoop/no-snoop latencies in the LTRV register in the MAC and 1043 * set the SEND bit to send an Intel On-chip System Fabric sideband (IOSF-SB) 1044 * message to the PMC. 1045 * 1046 * Use the LTR value to calculate the Optimized Buffer Flush/Fill (OBFF) 1047 * high-water mark. 1048 **/ 1049 static s32 e1000_platform_pm_pch_lpt(struct e1000_hw *hw, bool link) 1050 { 1051 u32 reg = link << (E1000_LTRV_REQ_SHIFT + E1000_LTRV_NOSNOOP_SHIFT) | 1052 link << E1000_LTRV_REQ_SHIFT | E1000_LTRV_SEND; 1053 u16 lat_enc = 0; /* latency encoded */ 1054 s32 obff_hwm = 0; 1055 1056 DEBUGFUNC("e1000_platform_pm_pch_lpt"); 1057 1058 if (link) { 1059 u16 speed, duplex, scale = 0; 1060 u16 max_snoop, max_nosnoop; 1061 u16 max_ltr_enc; /* max LTR latency encoded */ 1062 s64 lat_ns; /* latency (ns) */ 1063 s64 value; 1064 u32 rxa; 1065 1066 if (!hw->mac.max_frame_size) { 1067 DEBUGOUT("max_frame_size not set.\n"); 1068 return -E1000_ERR_CONFIG; 1069 } 1070 1071 hw->mac.ops.get_link_up_info(hw, &speed, &duplex); 1072 if (!speed) { 1073 DEBUGOUT("Speed not set.\n"); 1074 return -E1000_ERR_CONFIG; 1075 } 1076 1077 /* Rx Packet Buffer Allocation size (KB) */ 1078 rxa = E1000_READ_REG(hw, E1000_PBA) & E1000_PBA_RXA_MASK; 1079 1080 /* Determine the maximum latency tolerated by the device. 1081 * 1082 * Per the PCIe spec, the tolerated latencies are encoded as 1083 * a 3-bit encoded scale (only 0-5 are valid) multiplied by 1084 * a 10-bit value (0-1023) to provide a range from 1 ns to 1085 * 2^25*(2^10-1) ns. The scale is encoded as 0=2^0ns, 1086 * 1=2^5ns, 2=2^10ns,...5=2^25ns. 1087 */ 1088 lat_ns = ((s64)rxa * 1024 - 1089 (2 * (s64)hw->mac.max_frame_size)) * 8 * 1000; 1090 if (lat_ns < 0) 1091 lat_ns = 0; 1092 else 1093 lat_ns /= speed; 1094 1095 value = lat_ns; 1096 while (value > E1000_LTRV_VALUE_MASK) { 1097 scale++; 1098 value = E1000_DIVIDE_ROUND_UP(value, (1 << 5)); 1099 } 1100 if (scale > E1000_LTRV_SCALE_MAX) { 1101 DEBUGOUT1("Invalid LTR latency scale %d\n", scale); 1102 return -E1000_ERR_CONFIG; 1103 } 1104 lat_enc = (u16)((scale << E1000_LTRV_SCALE_SHIFT) | value); 1105 1106 /* Determine the maximum latency tolerated by the platform */ 1107 e1000_read_pci_cfg(hw, E1000_PCI_LTR_CAP_LPT, &max_snoop); 1108 e1000_read_pci_cfg(hw, E1000_PCI_LTR_CAP_LPT + 2, &max_nosnoop); 1109 max_ltr_enc = E1000_MAX(max_snoop, max_nosnoop); 1110 1111 if (lat_enc > max_ltr_enc) { 1112 lat_enc = max_ltr_enc; 1113 lat_ns = e1000_ltr2ns(max_ltr_enc); 1114 } 1115 1116 if (lat_ns) { 1117 lat_ns *= speed * 1000; 1118 lat_ns /= 8; 1119 lat_ns /= 1000000000; 1120 obff_hwm = (s32)(rxa - lat_ns); 1121 } 1122 if ((obff_hwm < 0) || (obff_hwm > E1000_SVT_OFF_HWM_MASK)) { 1123 DEBUGOUT1("Invalid high water mark %d\n", obff_hwm); 1124 return -E1000_ERR_CONFIG; 1125 } 1126 } 1127 1128 /* Set Snoop and No-Snoop latencies the same */ 1129 reg |= lat_enc | (lat_enc << E1000_LTRV_NOSNOOP_SHIFT); 1130 E1000_WRITE_REG(hw, E1000_LTRV, reg); 1131 1132 /* Set OBFF high water mark */ 1133 reg = E1000_READ_REG(hw, E1000_SVT) & ~E1000_SVT_OFF_HWM_MASK; 1134 reg |= obff_hwm; 1135 E1000_WRITE_REG(hw, E1000_SVT, reg); 1136 1137 /* Enable OBFF */ 1138 reg = E1000_READ_REG(hw, E1000_SVCR); 1139 reg |= E1000_SVCR_OFF_EN; 1140 /* Always unblock interrupts to the CPU even when the system is 1141 * in OBFF mode. This ensures that small round-robin traffic 1142 * (like ping) does not get dropped or experience long latency. 1143 */ 1144 reg |= E1000_SVCR_OFF_MASKINT; 1145 E1000_WRITE_REG(hw, E1000_SVCR, reg); 1146 1147 return E1000_SUCCESS; 1148 } 1149 1150 /** 1151 * e1000_set_obff_timer_pch_lpt - Update Optimized Buffer Flush/Fill timer 1152 * @hw: pointer to the HW structure 1153 * @itr: interrupt throttling rate 1154 * 1155 * Configure OBFF with the updated interrupt rate. 1156 **/ 1157 static s32 e1000_set_obff_timer_pch_lpt(struct e1000_hw *hw, u32 itr) 1158 { 1159 u32 svcr; 1160 s32 timer; 1161 1162 DEBUGFUNC("e1000_set_obff_timer_pch_lpt"); 1163 1164 /* Convert ITR value into microseconds for OBFF timer */ 1165 timer = itr & E1000_ITR_MASK; 1166 timer = (timer * E1000_ITR_MULT) / 1000; 1167 1168 if ((timer < 0) || (timer > E1000_ITR_MASK)) { 1169 DEBUGOUT1("Invalid OBFF timer %d\n", timer); 1170 return -E1000_ERR_CONFIG; 1171 } 1172 1173 svcr = E1000_READ_REG(hw, E1000_SVCR); 1174 svcr &= ~E1000_SVCR_OFF_TIMER_MASK; 1175 svcr |= timer << E1000_SVCR_OFF_TIMER_SHIFT; 1176 E1000_WRITE_REG(hw, E1000_SVCR, svcr); 1177 1178 return E1000_SUCCESS; 1179 } 1180 1181 /** 1182 * e1000_check_for_copper_link_ich8lan - Check for link (Copper) 1183 * @hw: pointer to the HW structure 1184 * 1185 * Checks to see of the link status of the hardware has changed. If a 1186 * change in link status has been detected, then we read the PHY registers 1187 * to get the current speed/duplex if link exists. 1188 **/ 1189 static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) 1190 { 1191 struct e1000_mac_info *mac = &hw->mac; 1192 s32 ret_val; 1193 bool link; 1194 u16 phy_reg; 1195 1196 DEBUGFUNC("e1000_check_for_copper_link_ich8lan"); 1197 1198 /* We only want to go out to the PHY registers to see if Auto-Neg 1199 * has completed and/or if our link status has changed. The 1200 * get_link_status flag is set upon receiving a Link Status 1201 * Change or Rx Sequence Error interrupt. 1202 */ 1203 if (!mac->get_link_status) 1204 return E1000_SUCCESS; 1205 1206 /* First we want to see if the MII Status Register reports 1207 * link. If so, then we want to get the current speed/duplex 1208 * of the PHY. 1209 */ 1210 ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link); 1211 if (ret_val) 1212 return ret_val; 1213 1214 if (hw->mac.type == e1000_pchlan) { 1215 ret_val = e1000_k1_gig_workaround_hv(hw, link); 1216 if (ret_val) 1217 return ret_val; 1218 } 1219 1220 /* When connected at 10Mbps half-duplex, 82579 parts are excessively 1221 * aggressive resulting in many collisions. To avoid this, increase 1222 * the IPG and reduce Rx latency in the PHY. 1223 */ 1224 if ((hw->mac.type == e1000_pch2lan) && link) { 1225 u32 reg; 1226 reg = E1000_READ_REG(hw, E1000_STATUS); 1227 if (!(reg & (E1000_STATUS_FD | E1000_STATUS_SPEED_MASK))) { 1228 reg = E1000_READ_REG(hw, E1000_TIPG); 1229 reg &= ~E1000_TIPG_IPGT_MASK; 1230 reg |= 0xFF; 1231 E1000_WRITE_REG(hw, E1000_TIPG, reg); 1232 1233 /* Reduce Rx latency in analog PHY */ 1234 ret_val = hw->phy.ops.acquire(hw); 1235 if (ret_val) 1236 return ret_val; 1237 1238 ret_val = e1000_write_emi_reg_locked(hw, I82579_RX_CONFIG, 0); 1239 1240 hw->phy.ops.release(hw); 1241 1242 if (ret_val) 1243 return ret_val; 1244 } 1245 } 1246 1247 /* Work-around I218 hang issue */ 1248 if ((hw->device_id == E1000_DEV_ID_PCH_LPTLP_I218_LM) || 1249 (hw->device_id == E1000_DEV_ID_PCH_LPTLP_I218_V)) { 1250 ret_val = e1000_k1_workaround_lpt_lp(hw, link); 1251 if (ret_val) 1252 return ret_val; 1253 } 1254 1255 if (hw->mac.type == e1000_pch_lpt) { 1256 /* Set platform power management values for 1257 * Latency Tolerance Reporting (LTR) 1258 * Optimized Buffer Flush/Fill (OBFF) 1259 */ 1260 ret_val = e1000_platform_pm_pch_lpt(hw, link); 1261 if (ret_val) 1262 return ret_val; 1263 } 1264 1265 /* Clear link partner's EEE ability */ 1266 hw->dev_spec.ich8lan.eee_lp_ability = 0; 1267 1268 if (!link) 1269 return E1000_SUCCESS; /* No link detected */ 1270 1271 mac->get_link_status = FALSE; 1272 1273 switch (hw->mac.type) { 1274 case e1000_pch2lan: 1275 ret_val = e1000_k1_workaround_lv(hw); 1276 if (ret_val) 1277 return ret_val; 1278 /* fall-thru */ 1279 case e1000_pchlan: 1280 if (hw->phy.type == e1000_phy_82578) { 1281 ret_val = e1000_link_stall_workaround_hv(hw); 1282 if (ret_val) 1283 return ret_val; 1284 } 1285 1286 /* Workaround for PCHx parts in half-duplex: 1287 * Set the number of preambles removed from the packet 1288 * when it is passed from the PHY to the MAC to prevent 1289 * the MAC from misinterpreting the packet type. 1290 */ 1291 hw->phy.ops.read_reg(hw, HV_KMRN_FIFO_CTRLSTA, &phy_reg); 1292 phy_reg &= ~HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK; 1293 1294 if ((E1000_READ_REG(hw, E1000_STATUS) & E1000_STATUS_FD) != 1295 E1000_STATUS_FD) 1296 phy_reg |= (1 << HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT); 1297 1298 hw->phy.ops.write_reg(hw, HV_KMRN_FIFO_CTRLSTA, phy_reg); 1299 break; 1300 default: 1301 break; 1302 } 1303 1304 /* Check if there was DownShift, must be checked 1305 * immediately after link-up 1306 */ 1307 e1000_check_downshift_generic(hw); 1308 1309 /* Enable/Disable EEE after link up */ 1310 if (hw->phy.type > e1000_phy_82579) { 1311 ret_val = e1000_set_eee_pchlan(hw); 1312 if (ret_val) 1313 return ret_val; 1314 } 1315 1316 /* If we are forcing speed/duplex, then we simply return since 1317 * we have already determined whether we have link or not. 1318 */ 1319 if (!mac->autoneg) 1320 return -E1000_ERR_CONFIG; 1321 1322 /* Auto-Neg is enabled. Auto Speed Detection takes care 1323 * of MAC speed/duplex configuration. So we only need to 1324 * configure Collision Distance in the MAC. 1325 */ 1326 mac->ops.config_collision_dist(hw); 1327 1328 /* Configure Flow Control now that Auto-Neg has completed. 1329 * First, we need to restore the desired flow control 1330 * settings because we may have had to re-autoneg with a 1331 * different link partner. 1332 */ 1333 ret_val = e1000_config_fc_after_link_up_generic(hw); 1334 if (ret_val) 1335 DEBUGOUT("Error configuring flow control\n"); 1336 1337 return ret_val; 1338 } 1339 1340 /** 1341 * e1000_init_function_pointers_ich8lan - Initialize ICH8 function pointers 1342 * @hw: pointer to the HW structure 1343 * 1344 * Initialize family-specific function pointers for PHY, MAC, and NVM. 1345 **/ 1346 void e1000_init_function_pointers_ich8lan(struct e1000_hw *hw) 1347 { 1348 DEBUGFUNC("e1000_init_function_pointers_ich8lan"); 1349 1350 hw->mac.ops.init_params = e1000_init_mac_params_ich8lan; 1351 hw->nvm.ops.init_params = e1000_init_nvm_params_ich8lan; 1352 switch (hw->mac.type) { 1353 case e1000_ich8lan: 1354 case e1000_ich9lan: 1355 case e1000_ich10lan: 1356 hw->phy.ops.init_params = e1000_init_phy_params_ich8lan; 1357 break; 1358 case e1000_pchlan: 1359 case e1000_pch2lan: 1360 case e1000_pch_lpt: 1361 hw->phy.ops.init_params = e1000_init_phy_params_pchlan; 1362 break; 1363 default: 1364 break; 1365 } 1366 } 1367 1368 /** 1369 * e1000_acquire_nvm_ich8lan - Acquire NVM mutex 1370 * @hw: pointer to the HW structure 1371 * 1372 * Acquires the mutex for performing NVM operations. 1373 **/ 1374 static s32 e1000_acquire_nvm_ich8lan(struct e1000_hw *hw) 1375 { 1376 DEBUGFUNC("e1000_acquire_nvm_ich8lan"); 1377 1378 E1000_MUTEX_LOCK(&hw->dev_spec.ich8lan.nvm_mutex); 1379 1380 return E1000_SUCCESS; 1381 } 1382 1383 /** 1384 * e1000_release_nvm_ich8lan - Release NVM mutex 1385 * @hw: pointer to the HW structure 1386 * 1387 * Releases the mutex used while performing NVM operations. 1388 **/ 1389 static void e1000_release_nvm_ich8lan(struct e1000_hw *hw) 1390 { 1391 DEBUGFUNC("e1000_release_nvm_ich8lan"); 1392 1393 E1000_MUTEX_UNLOCK(&hw->dev_spec.ich8lan.nvm_mutex); 1394 1395 return; 1396 } 1397 1398 /** 1399 * e1000_acquire_swflag_ich8lan - Acquire software control flag 1400 * @hw: pointer to the HW structure 1401 * 1402 * Acquires the software control flag for performing PHY and select 1403 * MAC CSR accesses. 1404 **/ 1405 static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) 1406 { 1407 u32 extcnf_ctrl, timeout = PHY_CFG_TIMEOUT; 1408 s32 ret_val = E1000_SUCCESS; 1409 1410 DEBUGFUNC("e1000_acquire_swflag_ich8lan"); 1411 1412 E1000_MUTEX_LOCK(&hw->dev_spec.ich8lan.swflag_mutex); 1413 1414 while (timeout) { 1415 extcnf_ctrl = E1000_READ_REG(hw, E1000_EXTCNF_CTRL); 1416 if (!(extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)) 1417 break; 1418 1419 msec_delay_irq(1); 1420 timeout--; 1421 } 1422 1423 if (!timeout) { 1424 DEBUGOUT("SW has already locked the resource.\n"); 1425 ret_val = -E1000_ERR_CONFIG; 1426 goto out; 1427 } 1428 1429 timeout = SW_FLAG_TIMEOUT; 1430 1431 extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG; 1432 E1000_WRITE_REG(hw, E1000_EXTCNF_CTRL, extcnf_ctrl); 1433 1434 while (timeout) { 1435 extcnf_ctrl = E1000_READ_REG(hw, E1000_EXTCNF_CTRL); 1436 if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG) 1437 break; 1438 1439 msec_delay_irq(1); 1440 timeout--; 1441 } 1442 1443 if (!timeout) { 1444 DEBUGOUT2("Failed to acquire the semaphore, FW or HW has it: FWSM=0x%8.8x EXTCNF_CTRL=0x%8.8x)\n", 1445 E1000_READ_REG(hw, E1000_FWSM), extcnf_ctrl); 1446 extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG; 1447 E1000_WRITE_REG(hw, E1000_EXTCNF_CTRL, extcnf_ctrl); 1448 ret_val = -E1000_ERR_CONFIG; 1449 goto out; 1450 } 1451 1452 out: 1453 if (ret_val) 1454 E1000_MUTEX_UNLOCK(&hw->dev_spec.ich8lan.swflag_mutex); 1455 1456 return ret_val; 1457 } 1458 1459 /** 1460 * e1000_release_swflag_ich8lan - Release software control flag 1461 * @hw: pointer to the HW structure 1462 * 1463 * Releases the software control flag for performing PHY and select 1464 * MAC CSR accesses. 1465 **/ 1466 static void e1000_release_swflag_ich8lan(struct e1000_hw *hw) 1467 { 1468 u32 extcnf_ctrl; 1469 1470 DEBUGFUNC("e1000_release_swflag_ich8lan"); 1471 1472 extcnf_ctrl = E1000_READ_REG(hw, E1000_EXTCNF_CTRL); 1473 1474 if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG) { 1475 extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG; 1476 E1000_WRITE_REG(hw, E1000_EXTCNF_CTRL, extcnf_ctrl); 1477 } else { 1478 DEBUGOUT("Semaphore unexpectedly released by sw/fw/hw\n"); 1479 } 1480 1481 E1000_MUTEX_UNLOCK(&hw->dev_spec.ich8lan.swflag_mutex); 1482 1483 return; 1484 } 1485 1486 /** 1487 * e1000_check_mng_mode_ich8lan - Checks management mode 1488 * @hw: pointer to the HW structure 1489 * 1490 * This checks if the adapter has any manageability enabled. 1491 * This is a function pointer entry point only called by read/write 1492 * routines for the PHY and NVM parts. 1493 **/ 1494 static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw) 1495 { 1496 u32 fwsm; 1497 1498 DEBUGFUNC("e1000_check_mng_mode_ich8lan"); 1499 1500 fwsm = E1000_READ_REG(hw, E1000_FWSM); 1501 1502 return ((fwsm & E1000_ICH_FWSM_FW_VALID) && 1503 ((fwsm & E1000_FWSM_MODE_MASK) == 1504 (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT))); 1505 } 1506 1507 /** 1508 * e1000_check_mng_mode_pchlan - Checks management mode 1509 * @hw: pointer to the HW structure 1510 * 1511 * This checks if the adapter has iAMT enabled. 1512 * This is a function pointer entry point only called by read/write 1513 * routines for the PHY and NVM parts. 1514 **/ 1515 static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw) 1516 { 1517 u32 fwsm; 1518 1519 DEBUGFUNC("e1000_check_mng_mode_pchlan"); 1520 1521 fwsm = E1000_READ_REG(hw, E1000_FWSM); 1522 1523 return (fwsm & E1000_ICH_FWSM_FW_VALID) && 1524 (fwsm & (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT)); 1525 } 1526 1527 /** 1528 * e1000_rar_set_pch2lan - Set receive address register 1529 * @hw: pointer to the HW structure 1530 * @addr: pointer to the receive address 1531 * @index: receive address array register 1532 * 1533 * Sets the receive address array register at index to the address passed 1534 * in by addr. For 82579, RAR[0] is the base address register that is to 1535 * contain the MAC address but RAR[1-6] are reserved for manageability (ME). 1536 * Use SHRA[0-3] in place of those reserved for ME. 1537 **/ 1538 static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index) 1539 { 1540 u32 rar_low, rar_high; 1541 1542 DEBUGFUNC("e1000_rar_set_pch2lan"); 1543 1544 /* HW expects these in little endian so we reverse the byte order 1545 * from network order (big endian) to little endian 1546 */ 1547 rar_low = ((u32) addr[0] | 1548 ((u32) addr[1] << 8) | 1549 ((u32) addr[2] << 16) | ((u32) addr[3] << 24)); 1550 1551 rar_high = ((u32) addr[4] | ((u32) addr[5] << 8)); 1552 1553 /* If MAC address zero, no need to set the AV bit */ 1554 if (rar_low || rar_high) 1555 rar_high |= E1000_RAH_AV; 1556 1557 if (index == 0) { 1558 E1000_WRITE_REG(hw, E1000_RAL(index), rar_low); 1559 E1000_WRITE_FLUSH(hw); 1560 E1000_WRITE_REG(hw, E1000_RAH(index), rar_high); 1561 E1000_WRITE_FLUSH(hw); 1562 return; 1563 } 1564 1565 /* RAR[1-6] are owned by manageability. Skip those and program the 1566 * next address into the SHRA register array. 1567 */ 1568 if (index < (u32) (hw->mac.rar_entry_count - 6)) { 1569 s32 ret_val; 1570 1571 ret_val = e1000_acquire_swflag_ich8lan(hw); 1572 if (ret_val) 1573 goto out; 1574 1575 E1000_WRITE_REG(hw, E1000_SHRAL(index - 1), rar_low); 1576 E1000_WRITE_FLUSH(hw); 1577 E1000_WRITE_REG(hw, E1000_SHRAH(index - 1), rar_high); 1578 E1000_WRITE_FLUSH(hw); 1579 1580 e1000_release_swflag_ich8lan(hw); 1581 1582 /* verify the register updates */ 1583 if ((E1000_READ_REG(hw, E1000_SHRAL(index - 1)) == rar_low) && 1584 (E1000_READ_REG(hw, E1000_SHRAH(index - 1)) == rar_high)) 1585 return; 1586 1587 DEBUGOUT2("SHRA[%d] might be locked by ME - FWSM=0x%8.8x\n", 1588 (index - 1), E1000_READ_REG(hw, E1000_FWSM)); 1589 } 1590 1591 out: 1592 DEBUGOUT1("Failed to write receive address at index %d\n", index); 1593 } 1594 1595 /** 1596 * e1000_rar_set_pch_lpt - Set receive address registers 1597 * @hw: pointer to the HW structure 1598 * @addr: pointer to the receive address 1599 * @index: receive address array register 1600 * 1601 * Sets the receive address register array at index to the address passed 1602 * in by addr. For LPT, RAR[0] is the base address register that is to 1603 * contain the MAC address. SHRA[0-10] are the shared receive address 1604 * registers that are shared between the Host and manageability engine (ME). 1605 **/ 1606 static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index) 1607 { 1608 u32 rar_low, rar_high; 1609 u32 wlock_mac; 1610 1611 DEBUGFUNC("e1000_rar_set_pch_lpt"); 1612 1613 /* HW expects these in little endian so we reverse the byte order 1614 * from network order (big endian) to little endian 1615 */ 1616 rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) | 1617 ((u32) addr[2] << 16) | ((u32) addr[3] << 24)); 1618 1619 rar_high = ((u32) addr[4] | ((u32) addr[5] << 8)); 1620 1621 /* If MAC address zero, no need to set the AV bit */ 1622 if (rar_low || rar_high) 1623 rar_high |= E1000_RAH_AV; 1624 1625 if (index == 0) { 1626 E1000_WRITE_REG(hw, E1000_RAL(index), rar_low); 1627 E1000_WRITE_FLUSH(hw); 1628 E1000_WRITE_REG(hw, E1000_RAH(index), rar_high); 1629 E1000_WRITE_FLUSH(hw); 1630 return; 1631 } 1632 1633 /* The manageability engine (ME) can lock certain SHRAR registers that 1634 * it is using - those registers are unavailable for use. 1635 */ 1636 if (index < hw->mac.rar_entry_count) { 1637 wlock_mac = E1000_READ_REG(hw, E1000_FWSM) & 1638 E1000_FWSM_WLOCK_MAC_MASK; 1639 wlock_mac >>= E1000_FWSM_WLOCK_MAC_SHIFT; 1640 1641 /* Check if all SHRAR registers are locked */ 1642 if (wlock_mac == 1) 1643 goto out; 1644 1645 if ((wlock_mac == 0) || (index <= wlock_mac)) { 1646 s32 ret_val; 1647 1648 ret_val = e1000_acquire_swflag_ich8lan(hw); 1649 1650 if (ret_val) 1651 goto out; 1652 1653 E1000_WRITE_REG(hw, E1000_SHRAL_PCH_LPT(index - 1), 1654 rar_low); 1655 E1000_WRITE_FLUSH(hw); 1656 E1000_WRITE_REG(hw, E1000_SHRAH_PCH_LPT(index - 1), 1657 rar_high); 1658 E1000_WRITE_FLUSH(hw); 1659 1660 e1000_release_swflag_ich8lan(hw); 1661 1662 /* verify the register updates */ 1663 if ((E1000_READ_REG(hw, E1000_SHRAL_PCH_LPT(index - 1)) == rar_low) && 1664 (E1000_READ_REG(hw, E1000_SHRAH_PCH_LPT(index - 1)) == rar_high)) 1665 return; 1666 } 1667 } 1668 1669 out: 1670 DEBUGOUT1("Failed to write receive address at index %d\n", index); 1671 } 1672 1673 /** 1674 * e1000_update_mc_addr_list_pch2lan - Update Multicast addresses 1675 * @hw: pointer to the HW structure 1676 * @mc_addr_list: array of multicast addresses to program 1677 * @mc_addr_count: number of multicast addresses to program 1678 * 1679 * Updates entire Multicast Table Array of the PCH2 MAC and PHY. 1680 * The caller must have a packed mc_addr_list of multicast addresses. 1681 **/ 1682 static void e1000_update_mc_addr_list_pch2lan(struct e1000_hw *hw, 1683 u8 *mc_addr_list, 1684 u32 mc_addr_count) 1685 { 1686 u16 phy_reg = 0; 1687 int i; 1688 s32 ret_val; 1689 1690 DEBUGFUNC("e1000_update_mc_addr_list_pch2lan"); 1691 1692 e1000_update_mc_addr_list_generic(hw, mc_addr_list, mc_addr_count); 1693 1694 ret_val = hw->phy.ops.acquire(hw); 1695 if (ret_val) 1696 return; 1697 1698 ret_val = e1000_enable_phy_wakeup_reg_access_bm(hw, &phy_reg); 1699 if (ret_val) 1700 goto release; 1701 1702 for (i = 0; i < hw->mac.mta_reg_count; i++) { 1703 hw->phy.ops.write_reg_page(hw, BM_MTA(i), 1704 (u16)(hw->mac.mta_shadow[i] & 1705 0xFFFF)); 1706 hw->phy.ops.write_reg_page(hw, (BM_MTA(i) + 1), 1707 (u16)((hw->mac.mta_shadow[i] >> 16) & 1708 0xFFFF)); 1709 } 1710 1711 e1000_disable_phy_wakeup_reg_access_bm(hw, &phy_reg); 1712 1713 release: 1714 hw->phy.ops.release(hw); 1715 } 1716 1717 /** 1718 * e1000_check_reset_block_ich8lan - Check if PHY reset is blocked 1719 * @hw: pointer to the HW structure 1720 * 1721 * Checks if firmware is blocking the reset of the PHY. 1722 * This is a function pointer entry point only called by 1723 * reset routines. 1724 **/ 1725 static s32 e1000_check_reset_block_ich8lan(struct e1000_hw *hw) 1726 { 1727 u32 fwsm; 1728 bool blocked = FALSE; 1729 int i = 0; 1730 1731 DEBUGFUNC("e1000_check_reset_block_ich8lan"); 1732 1733 do { 1734 fwsm = E1000_READ_REG(hw, E1000_FWSM); 1735 if (!(fwsm & E1000_ICH_FWSM_RSPCIPHY)) { 1736 blocked = TRUE; 1737 msec_delay(10); 1738 continue; 1739 } 1740 blocked = FALSE; 1741 } while (blocked && (i++ < 10)); 1742 return blocked ? E1000_BLK_PHY_RESET : E1000_SUCCESS; 1743 } 1744 1745 /** 1746 * e1000_write_smbus_addr - Write SMBus address to PHY needed during Sx states 1747 * @hw: pointer to the HW structure 1748 * 1749 * Assumes semaphore already acquired. 1750 * 1751 **/ 1752 static s32 e1000_write_smbus_addr(struct e1000_hw *hw) 1753 { 1754 u16 phy_data; 1755 u32 strap = E1000_READ_REG(hw, E1000_STRAP); 1756 u32 freq = (strap & E1000_STRAP_SMT_FREQ_MASK) >> 1757 E1000_STRAP_SMT_FREQ_SHIFT; 1758 s32 ret_val; 1759 1760 strap &= E1000_STRAP_SMBUS_ADDRESS_MASK; 1761 1762 ret_val = e1000_read_phy_reg_hv_locked(hw, HV_SMB_ADDR, &phy_data); 1763 if (ret_val) 1764 return ret_val; 1765 1766 phy_data &= ~HV_SMB_ADDR_MASK; 1767 phy_data |= (strap >> E1000_STRAP_SMBUS_ADDRESS_SHIFT); 1768 phy_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID; 1769 1770 if (hw->phy.type == e1000_phy_i217) { 1771 /* Restore SMBus frequency */ 1772 if (freq--) { 1773 phy_data &= ~HV_SMB_ADDR_FREQ_MASK; 1774 phy_data |= (freq & (1 << 0)) << 1775 HV_SMB_ADDR_FREQ_LOW_SHIFT; 1776 phy_data |= (freq & (1 << 1)) << 1777 (HV_SMB_ADDR_FREQ_HIGH_SHIFT - 1); 1778 } else { 1779 DEBUGOUT("Unsupported SMB frequency in PHY\n"); 1780 } 1781 } 1782 1783 return e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR, phy_data); 1784 } 1785 1786 /** 1787 * e1000_sw_lcd_config_ich8lan - SW-based LCD Configuration 1788 * @hw: pointer to the HW structure 1789 * 1790 * SW should configure the LCD from the NVM extended configuration region 1791 * as a workaround for certain parts. 1792 **/ 1793 static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) 1794 { 1795 struct e1000_phy_info *phy = &hw->phy; 1796 u32 i, data, cnf_size, cnf_base_addr, sw_cfg_mask; 1797 s32 ret_val = E1000_SUCCESS; 1798 u16 word_addr, reg_data, reg_addr, phy_page = 0; 1799 1800 DEBUGFUNC("e1000_sw_lcd_config_ich8lan"); 1801 1802 /* Initialize the PHY from the NVM on ICH platforms. This 1803 * is needed due to an issue where the NVM configuration is 1804 * not properly autoloaded after power transitions. 1805 * Therefore, after each PHY reset, we will load the 1806 * configuration data out of the NVM manually. 1807 */ 1808 switch (hw->mac.type) { 1809 case e1000_ich8lan: 1810 if (phy->type != e1000_phy_igp_3) 1811 return ret_val; 1812 1813 if ((hw->device_id == E1000_DEV_ID_ICH8_IGP_AMT) || 1814 (hw->device_id == E1000_DEV_ID_ICH8_IGP_C)) { 1815 sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG; 1816 break; 1817 } 1818 /* Fall-thru */ 1819 case e1000_pchlan: 1820 case e1000_pch2lan: 1821 case e1000_pch_lpt: 1822 sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M; 1823 break; 1824 default: 1825 return ret_val; 1826 } 1827 1828 ret_val = hw->phy.ops.acquire(hw); 1829 if (ret_val) 1830 return ret_val; 1831 1832 data = E1000_READ_REG(hw, E1000_FEXTNVM); 1833 if (!(data & sw_cfg_mask)) 1834 goto release; 1835 1836 /* Make sure HW does not configure LCD from PHY 1837 * extended configuration before SW configuration 1838 */ 1839 data = E1000_READ_REG(hw, E1000_EXTCNF_CTRL); 1840 if ((hw->mac.type < e1000_pch2lan) && 1841 (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE)) 1842 goto release; 1843 1844 cnf_size = E1000_READ_REG(hw, E1000_EXTCNF_SIZE); 1845 cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK; 1846 cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT; 1847 if (!cnf_size) 1848 goto release; 1849 1850 cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK; 1851 cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT; 1852 1853 if (((hw->mac.type == e1000_pchlan) && 1854 !(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE)) || 1855 (hw->mac.type > e1000_pchlan)) { 1856 /* HW configures the SMBus address and LEDs when the 1857 * OEM and LCD Write Enable bits are set in the NVM. 1858 * When both NVM bits are cleared, SW will configure 1859 * them instead. 1860 */ 1861 ret_val = e1000_write_smbus_addr(hw); 1862 if (ret_val) 1863 goto release; 1864 1865 data = E1000_READ_REG(hw, E1000_LEDCTL); 1866 ret_val = e1000_write_phy_reg_hv_locked(hw, HV_LED_CONFIG, 1867 (u16)data); 1868 if (ret_val) 1869 goto release; 1870 } 1871 1872 /* Configure LCD from extended configuration region. */ 1873 1874 /* cnf_base_addr is in DWORD */ 1875 word_addr = (u16)(cnf_base_addr << 1); 1876 1877 for (i = 0; i < cnf_size; i++) { 1878 ret_val = hw->nvm.ops.read(hw, (word_addr + i * 2), 1, 1879 ®_data); 1880 if (ret_val) 1881 goto release; 1882 1883 ret_val = hw->nvm.ops.read(hw, (word_addr + i * 2 + 1), 1884 1, ®_addr); 1885 if (ret_val) 1886 goto release; 1887 1888 /* Save off the PHY page for future writes. */ 1889 if (reg_addr == IGP01E1000_PHY_PAGE_SELECT) { 1890 phy_page = reg_data; 1891 continue; 1892 } 1893 1894 reg_addr &= PHY_REG_MASK; 1895 reg_addr |= phy_page; 1896 1897 ret_val = phy->ops.write_reg_locked(hw, (u32)reg_addr, 1898 reg_data); 1899 if (ret_val) 1900 goto release; 1901 } 1902 1903 release: 1904 hw->phy.ops.release(hw); 1905 return ret_val; 1906 } 1907 1908 /** 1909 * e1000_k1_gig_workaround_hv - K1 Si workaround 1910 * @hw: pointer to the HW structure 1911 * @link: link up bool flag 1912 * 1913 * If K1 is enabled for 1Gbps, the MAC might stall when transitioning 1914 * from a lower speed. This workaround disables K1 whenever link is at 1Gig 1915 * If link is down, the function will restore the default K1 setting located 1916 * in the NVM. 1917 **/ 1918 static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link) 1919 { 1920 s32 ret_val = E1000_SUCCESS; 1921 u16 status_reg = 0; 1922 bool k1_enable = hw->dev_spec.ich8lan.nvm_k1_enabled; 1923 1924 DEBUGFUNC("e1000_k1_gig_workaround_hv"); 1925 1926 if (hw->mac.type != e1000_pchlan) 1927 return E1000_SUCCESS; 1928 1929 /* Wrap the whole flow with the sw flag */ 1930 ret_val = hw->phy.ops.acquire(hw); 1931 if (ret_val) 1932 return ret_val; 1933 1934 /* Disable K1 when link is 1Gbps, otherwise use the NVM setting */ 1935 if (link) { 1936 if (hw->phy.type == e1000_phy_82578) { 1937 ret_val = hw->phy.ops.read_reg_locked(hw, BM_CS_STATUS, 1938 &status_reg); 1939 if (ret_val) 1940 goto release; 1941 1942 status_reg &= (BM_CS_STATUS_LINK_UP | 1943 BM_CS_STATUS_RESOLVED | 1944 BM_CS_STATUS_SPEED_MASK); 1945 1946 if (status_reg == (BM_CS_STATUS_LINK_UP | 1947 BM_CS_STATUS_RESOLVED | 1948 BM_CS_STATUS_SPEED_1000)) 1949 k1_enable = FALSE; 1950 } 1951 1952 if (hw->phy.type == e1000_phy_82577) { 1953 ret_val = hw->phy.ops.read_reg_locked(hw, HV_M_STATUS, 1954 &status_reg); 1955 if (ret_val) 1956 goto release; 1957 1958 status_reg &= (HV_M_STATUS_LINK_UP | 1959 HV_M_STATUS_AUTONEG_COMPLETE | 1960 HV_M_STATUS_SPEED_MASK); 1961 1962 if (status_reg == (HV_M_STATUS_LINK_UP | 1963 HV_M_STATUS_AUTONEG_COMPLETE | 1964 HV_M_STATUS_SPEED_1000)) 1965 k1_enable = FALSE; 1966 } 1967 1968 /* Link stall fix for link up */ 1969 ret_val = hw->phy.ops.write_reg_locked(hw, PHY_REG(770, 19), 1970 0x0100); 1971 if (ret_val) 1972 goto release; 1973 1974 } else { 1975 /* Link stall fix for link down */ 1976 ret_val = hw->phy.ops.write_reg_locked(hw, PHY_REG(770, 19), 1977 0x4100); 1978 if (ret_val) 1979 goto release; 1980 } 1981 1982 ret_val = e1000_configure_k1_ich8lan(hw, k1_enable); 1983 1984 release: 1985 hw->phy.ops.release(hw); 1986 1987 return ret_val; 1988 } 1989 1990 /** 1991 * e1000_configure_k1_ich8lan - Configure K1 power state 1992 * @hw: pointer to the HW structure 1993 * @enable: K1 state to configure 1994 * 1995 * Configure the K1 power state based on the provided parameter. 1996 * Assumes semaphore already acquired. 1997 * 1998 * Success returns 0, Failure returns -E1000_ERR_PHY (-2) 1999 **/ 2000 s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable) 2001 { 2002 s32 ret_val; 2003 u32 ctrl_reg = 0; 2004 u32 ctrl_ext = 0; 2005 u32 reg = 0; 2006 u16 kmrn_reg = 0; 2007 2008 DEBUGFUNC("e1000_configure_k1_ich8lan"); 2009 2010 ret_val = e1000_read_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG, 2011 &kmrn_reg); 2012 if (ret_val) 2013 return ret_val; 2014 2015 if (k1_enable) 2016 kmrn_reg |= E1000_KMRNCTRLSTA_K1_ENABLE; 2017 else 2018 kmrn_reg &= ~E1000_KMRNCTRLSTA_K1_ENABLE; 2019 2020 ret_val = e1000_write_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG, 2021 kmrn_reg); 2022 if (ret_val) 2023 return ret_val; 2024 2025 usec_delay(20); 2026 ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); 2027 ctrl_reg = E1000_READ_REG(hw, E1000_CTRL); 2028 2029 reg = ctrl_reg & ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100); 2030 reg |= E1000_CTRL_FRCSPD; 2031 E1000_WRITE_REG(hw, E1000_CTRL, reg); 2032 2033 E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_SPD_BYPS); 2034 E1000_WRITE_FLUSH(hw); 2035 usec_delay(20); 2036 E1000_WRITE_REG(hw, E1000_CTRL, ctrl_reg); 2037 E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); 2038 E1000_WRITE_FLUSH(hw); 2039 usec_delay(20); 2040 2041 return E1000_SUCCESS; 2042 } 2043 2044 /** 2045 * e1000_oem_bits_config_ich8lan - SW-based LCD Configuration 2046 * @hw: pointer to the HW structure 2047 * @d0_state: boolean if entering d0 or d3 device state 2048 * 2049 * SW will configure Gbe Disable and LPLU based on the NVM. The four bits are 2050 * collectively called OEM bits. The OEM Write Enable bit and SW Config bit 2051 * in NVM determines whether HW should configure LPLU and Gbe Disable. 2052 **/ 2053 static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state) 2054 { 2055 s32 ret_val = 0; 2056 u32 mac_reg; 2057 u16 oem_reg; 2058 2059 DEBUGFUNC("e1000_oem_bits_config_ich8lan"); 2060 2061 if (hw->mac.type < e1000_pchlan) 2062 return ret_val; 2063 2064 ret_val = hw->phy.ops.acquire(hw); 2065 if (ret_val) 2066 return ret_val; 2067 2068 if (hw->mac.type == e1000_pchlan) { 2069 mac_reg = E1000_READ_REG(hw, E1000_EXTCNF_CTRL); 2070 if (mac_reg & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) 2071 goto release; 2072 } 2073 2074 mac_reg = E1000_READ_REG(hw, E1000_FEXTNVM); 2075 if (!(mac_reg & E1000_FEXTNVM_SW_CONFIG_ICH8M)) 2076 goto release; 2077 2078 mac_reg = E1000_READ_REG(hw, E1000_PHY_CTRL); 2079 2080 ret_val = hw->phy.ops.read_reg_locked(hw, HV_OEM_BITS, &oem_reg); 2081 if (ret_val) 2082 goto release; 2083 2084 oem_reg &= ~(HV_OEM_BITS_GBE_DIS | HV_OEM_BITS_LPLU); 2085 2086 if (d0_state) { 2087 if (mac_reg & E1000_PHY_CTRL_GBE_DISABLE) 2088 oem_reg |= HV_OEM_BITS_GBE_DIS; 2089 2090 if (mac_reg & E1000_PHY_CTRL_D0A_LPLU) 2091 oem_reg |= HV_OEM_BITS_LPLU; 2092 } else { 2093 if (mac_reg & (E1000_PHY_CTRL_GBE_DISABLE | 2094 E1000_PHY_CTRL_NOND0A_GBE_DISABLE)) 2095 oem_reg |= HV_OEM_BITS_GBE_DIS; 2096 2097 if (mac_reg & (E1000_PHY_CTRL_D0A_LPLU | 2098 E1000_PHY_CTRL_NOND0A_LPLU)) 2099 oem_reg |= HV_OEM_BITS_LPLU; 2100 } 2101 2102 /* Set Restart auto-neg to activate the bits */ 2103 if ((d0_state || (hw->mac.type != e1000_pchlan)) && 2104 !hw->phy.ops.check_reset_block(hw)) 2105 oem_reg |= HV_OEM_BITS_RESTART_AN; 2106 2107 ret_val = hw->phy.ops.write_reg_locked(hw, HV_OEM_BITS, oem_reg); 2108 2109 release: 2110 hw->phy.ops.release(hw); 2111 2112 return ret_val; 2113 } 2114 2115 2116 /** 2117 * e1000_set_mdio_slow_mode_hv - Set slow MDIO access mode 2118 * @hw: pointer to the HW structure 2119 **/ 2120 static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw) 2121 { 2122 s32 ret_val; 2123 u16 data; 2124 2125 DEBUGFUNC("e1000_set_mdio_slow_mode_hv"); 2126 2127 ret_val = hw->phy.ops.read_reg(hw, HV_KMRN_MODE_CTRL, &data); 2128 if (ret_val) 2129 return ret_val; 2130 2131 data |= HV_KMRN_MDIO_SLOW; 2132 2133 ret_val = hw->phy.ops.write_reg(hw, HV_KMRN_MODE_CTRL, data); 2134 2135 return ret_val; 2136 } 2137 2138 /** 2139 * e1000_hv_phy_workarounds_ich8lan - A series of Phy workarounds to be 2140 * done after every PHY reset. 2141 **/ 2142 static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw) 2143 { 2144 s32 ret_val = E1000_SUCCESS; 2145 u16 phy_data; 2146 2147 DEBUGFUNC("e1000_hv_phy_workarounds_ich8lan"); 2148 2149 if (hw->mac.type != e1000_pchlan) 2150 return E1000_SUCCESS; 2151 2152 /* Set MDIO slow mode before any other MDIO access */ 2153 if (hw->phy.type == e1000_phy_82577) { 2154 ret_val = e1000_set_mdio_slow_mode_hv(hw); 2155 if (ret_val) 2156 return ret_val; 2157 } 2158 2159 if (((hw->phy.type == e1000_phy_82577) && 2160 ((hw->phy.revision == 1) || (hw->phy.revision == 2))) || 2161 ((hw->phy.type == e1000_phy_82578) && (hw->phy.revision == 1))) { 2162 /* Disable generation of early preamble */ 2163 ret_val = hw->phy.ops.write_reg(hw, PHY_REG(769, 25), 0x4431); 2164 if (ret_val) 2165 return ret_val; 2166 2167 /* Preamble tuning for SSC */ 2168 ret_val = hw->phy.ops.write_reg(hw, HV_KMRN_FIFO_CTRLSTA, 2169 0xA204); 2170 if (ret_val) 2171 return ret_val; 2172 } 2173 2174 if (hw->phy.type == e1000_phy_82578) { 2175 /* Return registers to default by doing a soft reset then 2176 * writing 0x3140 to the control register. 2177 */ 2178 if (hw->phy.revision < 2) { 2179 e1000_phy_sw_reset_generic(hw); 2180 ret_val = hw->phy.ops.write_reg(hw, PHY_CONTROL, 2181 0x3140); 2182 } 2183 } 2184 2185 /* Select page 0 */ 2186 ret_val = hw->phy.ops.acquire(hw); 2187 if (ret_val) 2188 return ret_val; 2189 2190 hw->phy.addr = 1; 2191 ret_val = e1000_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0); 2192 hw->phy.ops.release(hw); 2193 if (ret_val) 2194 return ret_val; 2195 2196 /* Configure the K1 Si workaround during phy reset assuming there is 2197 * link so that it disables K1 if link is in 1Gbps. 2198 */ 2199 ret_val = e1000_k1_gig_workaround_hv(hw, TRUE); 2200 if (ret_val) 2201 return ret_val; 2202 2203 /* Workaround for link disconnects on a busy hub in half duplex */ 2204 ret_val = hw->phy.ops.acquire(hw); 2205 if (ret_val) 2206 return ret_val; 2207 ret_val = hw->phy.ops.read_reg_locked(hw, BM_PORT_GEN_CFG, &phy_data); 2208 if (ret_val) 2209 goto release; 2210 ret_val = hw->phy.ops.write_reg_locked(hw, BM_PORT_GEN_CFG, 2211 phy_data & 0x00FF); 2212 if (ret_val) 2213 goto release; 2214 2215 /* set MSE higher to enable link to stay up when noise is high */ 2216 ret_val = e1000_write_emi_reg_locked(hw, I82577_MSE_THRESHOLD, 0x0034); 2217 release: 2218 hw->phy.ops.release(hw); 2219 2220 return ret_val; 2221 } 2222 2223 /** 2224 * e1000_copy_rx_addrs_to_phy_ich8lan - Copy Rx addresses from MAC to PHY 2225 * @hw: pointer to the HW structure 2226 **/ 2227 void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw) 2228 { 2229 u32 mac_reg; 2230 u16 i, phy_reg = 0; 2231 s32 ret_val; 2232 2233 DEBUGFUNC("e1000_copy_rx_addrs_to_phy_ich8lan"); 2234 2235 ret_val = hw->phy.ops.acquire(hw); 2236 if (ret_val) 2237 return; 2238 ret_val = e1000_enable_phy_wakeup_reg_access_bm(hw, &phy_reg); 2239 if (ret_val) 2240 goto release; 2241 2242 /* Copy both RAL/H (rar_entry_count) and SHRAL/H to PHY */ 2243 for (i = 0; i < (hw->mac.rar_entry_count); i++) { 2244 mac_reg = E1000_READ_REG(hw, E1000_RAL(i)); 2245 hw->phy.ops.write_reg_page(hw, BM_RAR_L(i), 2246 (u16)(mac_reg & 0xFFFF)); 2247 hw->phy.ops.write_reg_page(hw, BM_RAR_M(i), 2248 (u16)((mac_reg >> 16) & 0xFFFF)); 2249 2250 mac_reg = E1000_READ_REG(hw, E1000_RAH(i)); 2251 hw->phy.ops.write_reg_page(hw, BM_RAR_H(i), 2252 (u16)(mac_reg & 0xFFFF)); 2253 hw->phy.ops.write_reg_page(hw, BM_RAR_CTRL(i), 2254 (u16)((mac_reg & E1000_RAH_AV) 2255 >> 16)); 2256 } 2257 2258 e1000_disable_phy_wakeup_reg_access_bm(hw, &phy_reg); 2259 2260 release: 2261 hw->phy.ops.release(hw); 2262 } 2263 2264 static u32 e1000_calc_rx_da_crc(u8 mac[]) 2265 { 2266 u32 poly = 0xEDB88320; /* Polynomial for 802.3 CRC calculation */ 2267 u32 i, j, mask, crc; 2268 2269 DEBUGFUNC("e1000_calc_rx_da_crc"); 2270 2271 crc = 0xffffffff; 2272 for (i = 0; i < 6; i++) { 2273 crc = crc ^ mac[i]; 2274 for (j = 8; j > 0; j--) { 2275 mask = (crc & 1) * (-1); 2276 crc = (crc >> 1) ^ (poly & mask); 2277 } 2278 } 2279 return ~crc; 2280 } 2281 2282 /** 2283 * e1000_lv_jumbo_workaround_ich8lan - required for jumbo frame operation 2284 * with 82579 PHY 2285 * @hw: pointer to the HW structure 2286 * @enable: flag to enable/disable workaround when enabling/disabling jumbos 2287 **/ 2288 s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable) 2289 { 2290 s32 ret_val = E1000_SUCCESS; 2291 u16 phy_reg, data; 2292 u32 mac_reg; 2293 u16 i; 2294 2295 DEBUGFUNC("e1000_lv_jumbo_workaround_ich8lan"); 2296 2297 if (hw->mac.type < e1000_pch2lan) 2298 return E1000_SUCCESS; 2299 2300 /* disable Rx path while enabling/disabling workaround */ 2301 hw->phy.ops.read_reg(hw, PHY_REG(769, 20), &phy_reg); 2302 ret_val = hw->phy.ops.write_reg(hw, PHY_REG(769, 20), 2303 phy_reg | (1 << 14)); 2304 if (ret_val) 2305 return ret_val; 2306 2307 if (enable) { 2308 /* Write Rx addresses (rar_entry_count for RAL/H, and 2309 * SHRAL/H) and initial CRC values to the MAC 2310 */ 2311 for (i = 0; i < hw->mac.rar_entry_count; i++) { 2312 u8 mac_addr[ETH_ADDR_LEN] = {0}; 2313 u32 addr_high, addr_low; 2314 2315 addr_high = E1000_READ_REG(hw, E1000_RAH(i)); 2316 if (!(addr_high & E1000_RAH_AV)) 2317 continue; 2318 addr_low = E1000_READ_REG(hw, E1000_RAL(i)); 2319 mac_addr[0] = (addr_low & 0xFF); 2320 mac_addr[1] = ((addr_low >> 8) & 0xFF); 2321 mac_addr[2] = ((addr_low >> 16) & 0xFF); 2322 mac_addr[3] = ((addr_low >> 24) & 0xFF); 2323 mac_addr[4] = (addr_high & 0xFF); 2324 mac_addr[5] = ((addr_high >> 8) & 0xFF); 2325 2326 E1000_WRITE_REG(hw, E1000_PCH_RAICC(i), 2327 e1000_calc_rx_da_crc(mac_addr)); 2328 } 2329 2330 /* Write Rx addresses to the PHY */ 2331 e1000_copy_rx_addrs_to_phy_ich8lan(hw); 2332 2333 /* Enable jumbo frame workaround in the MAC */ 2334 mac_reg = E1000_READ_REG(hw, E1000_FFLT_DBG); 2335 mac_reg &= ~(1 << 14); 2336 mac_reg |= (7 << 15); 2337 E1000_WRITE_REG(hw, E1000_FFLT_DBG, mac_reg); 2338 2339 mac_reg = E1000_READ_REG(hw, E1000_RCTL); 2340 mac_reg |= E1000_RCTL_SECRC; 2341 E1000_WRITE_REG(hw, E1000_RCTL, mac_reg); 2342 2343 ret_val = e1000_read_kmrn_reg_generic(hw, 2344 E1000_KMRNCTRLSTA_CTRL_OFFSET, 2345 &data); 2346 if (ret_val) 2347 return ret_val; 2348 ret_val = e1000_write_kmrn_reg_generic(hw, 2349 E1000_KMRNCTRLSTA_CTRL_OFFSET, 2350 data | (1 << 0)); 2351 if (ret_val) 2352 return ret_val; 2353 ret_val = e1000_read_kmrn_reg_generic(hw, 2354 E1000_KMRNCTRLSTA_HD_CTRL, 2355 &data); 2356 if (ret_val) 2357 return ret_val; 2358 data &= ~(0xF << 8); 2359 data |= (0xB << 8); 2360 ret_val = e1000_write_kmrn_reg_generic(hw, 2361 E1000_KMRNCTRLSTA_HD_CTRL, 2362 data); 2363 if (ret_val) 2364 return ret_val; 2365 2366 /* Enable jumbo frame workaround in the PHY */ 2367 hw->phy.ops.read_reg(hw, PHY_REG(769, 23), &data); 2368 data &= ~(0x7F << 5); 2369 data |= (0x37 << 5); 2370 ret_val = hw->phy.ops.write_reg(hw, PHY_REG(769, 23), data); 2371 if (ret_val) 2372 return ret_val; 2373 hw->phy.ops.read_reg(hw, PHY_REG(769, 16), &data); 2374 data &= ~(1 << 13); 2375 ret_val = hw->phy.ops.write_reg(hw, PHY_REG(769, 16), data); 2376 if (ret_val) 2377 return ret_val; 2378 hw->phy.ops.read_reg(hw, PHY_REG(776, 20), &data); 2379 data &= ~(0x3FF << 2); 2380 data |= (0x1A << 2); 2381 ret_val = hw->phy.ops.write_reg(hw, PHY_REG(776, 20), data); 2382 if (ret_val) 2383 return ret_val; 2384 ret_val = hw->phy.ops.write_reg(hw, PHY_REG(776, 23), 0xF100); 2385 if (ret_val) 2386 return ret_val; 2387 hw->phy.ops.read_reg(hw, HV_PM_CTRL, &data); 2388 ret_val = hw->phy.ops.write_reg(hw, HV_PM_CTRL, data | 2389 (1 << 10)); 2390 if (ret_val) 2391 return ret_val; 2392 } else { 2393 /* Write MAC register values back to h/w defaults */ 2394 mac_reg = E1000_READ_REG(hw, E1000_FFLT_DBG); 2395 mac_reg &= ~(0xF << 14); 2396 E1000_WRITE_REG(hw, E1000_FFLT_DBG, mac_reg); 2397 2398 mac_reg = E1000_READ_REG(hw, E1000_RCTL); 2399 mac_reg &= ~E1000_RCTL_SECRC; 2400 E1000_WRITE_REG(hw, E1000_RCTL, mac_reg); 2401 2402 ret_val = e1000_read_kmrn_reg_generic(hw, 2403 E1000_KMRNCTRLSTA_CTRL_OFFSET, 2404 &data); 2405 if (ret_val) 2406 return ret_val; 2407 ret_val = e1000_write_kmrn_reg_generic(hw, 2408 E1000_KMRNCTRLSTA_CTRL_OFFSET, 2409 data & ~(1 << 0)); 2410 if (ret_val) 2411 return ret_val; 2412 ret_val = e1000_read_kmrn_reg_generic(hw, 2413 E1000_KMRNCTRLSTA_HD_CTRL, 2414 &data); 2415 if (ret_val) 2416 return ret_val; 2417 data &= ~(0xF << 8); 2418 data |= (0xB << 8); 2419 ret_val = e1000_write_kmrn_reg_generic(hw, 2420 E1000_KMRNCTRLSTA_HD_CTRL, 2421 data); 2422 if (ret_val) 2423 return ret_val; 2424 2425 /* Write PHY register values back to h/w defaults */ 2426 hw->phy.ops.read_reg(hw, PHY_REG(769, 23), &data); 2427 data &= ~(0x7F << 5); 2428 ret_val = hw->phy.ops.write_reg(hw, PHY_REG(769, 23), data); 2429 if (ret_val) 2430 return ret_val; 2431 hw->phy.ops.read_reg(hw, PHY_REG(769, 16), &data); 2432 data |= (1 << 13); 2433 ret_val = hw->phy.ops.write_reg(hw, PHY_REG(769, 16), data); 2434 if (ret_val) 2435 return ret_val; 2436 hw->phy.ops.read_reg(hw, PHY_REG(776, 20), &data); 2437 data &= ~(0x3FF << 2); 2438 data |= (0x8 << 2); 2439 ret_val = hw->phy.ops.write_reg(hw, PHY_REG(776, 20), data); 2440 if (ret_val) 2441 return ret_val; 2442 ret_val = hw->phy.ops.write_reg(hw, PHY_REG(776, 23), 0x7E00); 2443 if (ret_val) 2444 return ret_val; 2445 hw->phy.ops.read_reg(hw, HV_PM_CTRL, &data); 2446 ret_val = hw->phy.ops.write_reg(hw, HV_PM_CTRL, data & 2447 ~(1 << 10)); 2448 if (ret_val) 2449 return ret_val; 2450 } 2451 2452 /* re-enable Rx path after enabling/disabling workaround */ 2453 return hw->phy.ops.write_reg(hw, PHY_REG(769, 20), phy_reg & 2454 ~(1 << 14)); 2455 } 2456 2457 /** 2458 * e1000_lv_phy_workarounds_ich8lan - A series of Phy workarounds to be 2459 * done after every PHY reset. 2460 **/ 2461 static s32 e1000_lv_phy_workarounds_ich8lan(struct e1000_hw *hw) 2462 { 2463 s32 ret_val = E1000_SUCCESS; 2464 2465 DEBUGFUNC("e1000_lv_phy_workarounds_ich8lan"); 2466 2467 if (hw->mac.type != e1000_pch2lan) 2468 return E1000_SUCCESS; 2469 2470 /* Set MDIO slow mode before any other MDIO access */ 2471 ret_val = e1000_set_mdio_slow_mode_hv(hw); 2472 if (ret_val) 2473 return ret_val; 2474 2475 ret_val = hw->phy.ops.acquire(hw); 2476 if (ret_val) 2477 return ret_val; 2478 /* set MSE higher to enable link to stay up when noise is high */ 2479 ret_val = e1000_write_emi_reg_locked(hw, I82579_MSE_THRESHOLD, 0x0034); 2480 if (ret_val) 2481 goto release; 2482 /* drop link after 5 times MSE threshold was reached */ 2483 ret_val = e1000_write_emi_reg_locked(hw, I82579_MSE_LINK_DOWN, 0x0005); 2484 release: 2485 hw->phy.ops.release(hw); 2486 2487 return ret_val; 2488 } 2489 2490 /** 2491 * e1000_k1_gig_workaround_lv - K1 Si workaround 2492 * @hw: pointer to the HW structure 2493 * 2494 * Workaround to set the K1 beacon duration for 82579 parts 2495 **/ 2496 static s32 e1000_k1_workaround_lv(struct e1000_hw *hw) 2497 { 2498 s32 ret_val = E1000_SUCCESS; 2499 u16 status_reg = 0; 2500 u32 mac_reg; 2501 u16 phy_reg; 2502 2503 DEBUGFUNC("e1000_k1_workaround_lv"); 2504 2505 if (hw->mac.type != e1000_pch2lan) 2506 return E1000_SUCCESS; 2507 2508 /* Set K1 beacon duration based on 1Gbps speed or otherwise */ 2509 ret_val = hw->phy.ops.read_reg(hw, HV_M_STATUS, &status_reg); 2510 if (ret_val) 2511 return ret_val; 2512 2513 if ((status_reg & (HV_M_STATUS_LINK_UP | HV_M_STATUS_AUTONEG_COMPLETE)) 2514 == (HV_M_STATUS_LINK_UP | HV_M_STATUS_AUTONEG_COMPLETE)) { 2515 mac_reg = E1000_READ_REG(hw, E1000_FEXTNVM4); 2516 mac_reg &= ~E1000_FEXTNVM4_BEACON_DURATION_MASK; 2517 2518 ret_val = hw->phy.ops.read_reg(hw, I82579_LPI_CTRL, &phy_reg); 2519 if (ret_val) 2520 return ret_val; 2521 2522 if (status_reg & HV_M_STATUS_SPEED_1000) { 2523 u16 pm_phy_reg; 2524 2525 mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_8USEC; 2526 phy_reg &= ~I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT; 2527 /* LV 1G Packet drop issue wa */ 2528 ret_val = hw->phy.ops.read_reg(hw, HV_PM_CTRL, 2529 &pm_phy_reg); 2530 if (ret_val) 2531 return ret_val; 2532 pm_phy_reg &= ~HV_PM_CTRL_PLL_STOP_IN_K1_GIGA; 2533 ret_val = hw->phy.ops.write_reg(hw, HV_PM_CTRL, 2534 pm_phy_reg); 2535 if (ret_val) 2536 return ret_val; 2537 } else { 2538 mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_16USEC; 2539 phy_reg |= I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT; 2540 } 2541 E1000_WRITE_REG(hw, E1000_FEXTNVM4, mac_reg); 2542 ret_val = hw->phy.ops.write_reg(hw, I82579_LPI_CTRL, phy_reg); 2543 } 2544 2545 return ret_val; 2546 } 2547 2548 /** 2549 * e1000_gate_hw_phy_config_ich8lan - disable PHY config via hardware 2550 * @hw: pointer to the HW structure 2551 * @gate: boolean set to TRUE to gate, FALSE to ungate 2552 * 2553 * Gate/ungate the automatic PHY configuration via hardware; perform 2554 * the configuration via software instead. 2555 **/ 2556 static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate) 2557 { 2558 u32 extcnf_ctrl; 2559 2560 DEBUGFUNC("e1000_gate_hw_phy_config_ich8lan"); 2561 2562 if (hw->mac.type < e1000_pch2lan) 2563 return; 2564 2565 extcnf_ctrl = E1000_READ_REG(hw, E1000_EXTCNF_CTRL); 2566 2567 if (gate) 2568 extcnf_ctrl |= E1000_EXTCNF_CTRL_GATE_PHY_CFG; 2569 else 2570 extcnf_ctrl &= ~E1000_EXTCNF_CTRL_GATE_PHY_CFG; 2571 2572 E1000_WRITE_REG(hw, E1000_EXTCNF_CTRL, extcnf_ctrl); 2573 } 2574 2575 /** 2576 * e1000_lan_init_done_ich8lan - Check for PHY config completion 2577 * @hw: pointer to the HW structure 2578 * 2579 * Check the appropriate indication the MAC has finished configuring the 2580 * PHY after a software reset. 2581 **/ 2582 static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw) 2583 { 2584 u32 data, loop = E1000_ICH8_LAN_INIT_TIMEOUT; 2585 2586 DEBUGFUNC("e1000_lan_init_done_ich8lan"); 2587 2588 /* Wait for basic configuration completes before proceeding */ 2589 do { 2590 data = E1000_READ_REG(hw, E1000_STATUS); 2591 data &= E1000_STATUS_LAN_INIT_DONE; 2592 usec_delay(100); 2593 } while ((!data) && --loop); 2594 2595 /* If basic configuration is incomplete before the above loop 2596 * count reaches 0, loading the configuration from NVM will 2597 * leave the PHY in a bad state possibly resulting in no link. 2598 */ 2599 if (loop == 0) 2600 DEBUGOUT("LAN_INIT_DONE not set, increase timeout\n"); 2601 2602 /* Clear the Init Done bit for the next init event */ 2603 data = E1000_READ_REG(hw, E1000_STATUS); 2604 data &= ~E1000_STATUS_LAN_INIT_DONE; 2605 E1000_WRITE_REG(hw, E1000_STATUS, data); 2606 } 2607 2608 /** 2609 * e1000_post_phy_reset_ich8lan - Perform steps required after a PHY reset 2610 * @hw: pointer to the HW structure 2611 **/ 2612 static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw) 2613 { 2614 s32 ret_val = E1000_SUCCESS; 2615 u16 reg; 2616 2617 DEBUGFUNC("e1000_post_phy_reset_ich8lan"); 2618 2619 if (hw->phy.ops.check_reset_block(hw)) 2620 return E1000_SUCCESS; 2621 2622 /* Allow time for h/w to get to quiescent state after reset */ 2623 msec_delay(10); 2624 2625 /* Perform any necessary post-reset workarounds */ 2626 switch (hw->mac.type) { 2627 case e1000_pchlan: 2628 ret_val = e1000_hv_phy_workarounds_ich8lan(hw); 2629 if (ret_val) 2630 return ret_val; 2631 break; 2632 case e1000_pch2lan: 2633 ret_val = e1000_lv_phy_workarounds_ich8lan(hw); 2634 if (ret_val) 2635 return ret_val; 2636 break; 2637 default: 2638 break; 2639 } 2640 2641 /* Clear the host wakeup bit after lcd reset */ 2642 if (hw->mac.type >= e1000_pchlan) { 2643 hw->phy.ops.read_reg(hw, BM_PORT_GEN_CFG, ®); 2644 reg &= ~BM_WUC_HOST_WU_BIT; 2645 hw->phy.ops.write_reg(hw, BM_PORT_GEN_CFG, reg); 2646 } 2647 2648 /* Configure the LCD with the extended configuration region in NVM */ 2649 ret_val = e1000_sw_lcd_config_ich8lan(hw); 2650 if (ret_val) 2651 return ret_val; 2652 2653 /* Configure the LCD with the OEM bits in NVM */ 2654 ret_val = e1000_oem_bits_config_ich8lan(hw, TRUE); 2655 2656 if (hw->mac.type == e1000_pch2lan) { 2657 /* Ungate automatic PHY configuration on non-managed 82579 */ 2658 if (!(E1000_READ_REG(hw, E1000_FWSM) & 2659 E1000_ICH_FWSM_FW_VALID)) { 2660 msec_delay(10); 2661 e1000_gate_hw_phy_config_ich8lan(hw, FALSE); 2662 } 2663 2664 /* Set EEE LPI Update Timer to 200usec */ 2665 ret_val = hw->phy.ops.acquire(hw); 2666 if (ret_val) 2667 return ret_val; 2668 ret_val = e1000_write_emi_reg_locked(hw, 2669 I82579_LPI_UPDATE_TIMER, 2670 0x1387); 2671 hw->phy.ops.release(hw); 2672 } 2673 2674 return ret_val; 2675 } 2676 2677 /** 2678 * e1000_phy_hw_reset_ich8lan - Performs a PHY reset 2679 * @hw: pointer to the HW structure 2680 * 2681 * Resets the PHY 2682 * This is a function pointer entry point called by drivers 2683 * or other shared routines. 2684 **/ 2685 static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw) 2686 { 2687 s32 ret_val = E1000_SUCCESS; 2688 2689 DEBUGFUNC("e1000_phy_hw_reset_ich8lan"); 2690 2691 /* Gate automatic PHY configuration by hardware on non-managed 82579 */ 2692 if ((hw->mac.type == e1000_pch2lan) && 2693 !(E1000_READ_REG(hw, E1000_FWSM) & E1000_ICH_FWSM_FW_VALID)) 2694 e1000_gate_hw_phy_config_ich8lan(hw, TRUE); 2695 2696 ret_val = e1000_phy_hw_reset_generic(hw); 2697 if (ret_val) 2698 return ret_val; 2699 2700 return e1000_post_phy_reset_ich8lan(hw); 2701 } 2702 2703 /** 2704 * e1000_set_lplu_state_pchlan - Set Low Power Link Up state 2705 * @hw: pointer to the HW structure 2706 * @active: TRUE to enable LPLU, FALSE to disable 2707 * 2708 * Sets the LPLU state according to the active flag. For PCH, if OEM write 2709 * bit are disabled in the NVM, writing the LPLU bits in the MAC will not set 2710 * the phy speed. This function will manually set the LPLU bit and restart 2711 * auto-neg as hw would do. D3 and D0 LPLU will call the same function 2712 * since it configures the same bit. 2713 **/ 2714 static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active) 2715 { 2716 s32 ret_val; 2717 u16 oem_reg; 2718 2719 DEBUGFUNC("e1000_set_lplu_state_pchlan"); 2720 2721 ret_val = hw->phy.ops.read_reg(hw, HV_OEM_BITS, &oem_reg); 2722 if (ret_val) 2723 return ret_val; 2724 2725 if (active) 2726 oem_reg |= HV_OEM_BITS_LPLU; 2727 else 2728 oem_reg &= ~HV_OEM_BITS_LPLU; 2729 2730 if (!hw->phy.ops.check_reset_block(hw)) 2731 oem_reg |= HV_OEM_BITS_RESTART_AN; 2732 2733 return hw->phy.ops.write_reg(hw, HV_OEM_BITS, oem_reg); 2734 } 2735 2736 /** 2737 * e1000_set_d0_lplu_state_ich8lan - Set Low Power Linkup D0 state 2738 * @hw: pointer to the HW structure 2739 * @active: TRUE to enable LPLU, FALSE to disable 2740 * 2741 * Sets the LPLU D0 state according to the active flag. When 2742 * activating LPLU this function also disables smart speed 2743 * and vice versa. LPLU will not be activated unless the 2744 * device autonegotiation advertisement meets standards of 2745 * either 10 or 10/100 or 10/100/1000 at all duplexes. 2746 * This is a function pointer entry point only called by 2747 * PHY setup routines. 2748 **/ 2749 static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active) 2750 { 2751 struct e1000_phy_info *phy = &hw->phy; 2752 u32 phy_ctrl; 2753 s32 ret_val = E1000_SUCCESS; 2754 u16 data; 2755 2756 DEBUGFUNC("e1000_set_d0_lplu_state_ich8lan"); 2757 2758 if (phy->type == e1000_phy_ife) 2759 return E1000_SUCCESS; 2760 2761 phy_ctrl = E1000_READ_REG(hw, E1000_PHY_CTRL); 2762 2763 if (active) { 2764 phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU; 2765 E1000_WRITE_REG(hw, E1000_PHY_CTRL, phy_ctrl); 2766 2767 if (phy->type != e1000_phy_igp_3) 2768 return E1000_SUCCESS; 2769 2770 /* Call gig speed drop workaround on LPLU before accessing 2771 * any PHY registers 2772 */ 2773 if (hw->mac.type == e1000_ich8lan) 2774 e1000_gig_downshift_workaround_ich8lan(hw); 2775 2776 /* When LPLU is enabled, we should disable SmartSpeed */ 2777 ret_val = phy->ops.read_reg(hw, 2778 IGP01E1000_PHY_PORT_CONFIG, 2779 &data); 2780 if (ret_val) 2781 return ret_val; 2782 data &= ~IGP01E1000_PSCFR_SMART_SPEED; 2783 ret_val = phy->ops.write_reg(hw, 2784 IGP01E1000_PHY_PORT_CONFIG, 2785 data); 2786 if (ret_val) 2787 return ret_val; 2788 } else { 2789 phy_ctrl &= ~E1000_PHY_CTRL_D0A_LPLU; 2790 E1000_WRITE_REG(hw, E1000_PHY_CTRL, phy_ctrl); 2791 2792 if (phy->type != e1000_phy_igp_3) 2793 return E1000_SUCCESS; 2794 2795 /* LPLU and SmartSpeed are mutually exclusive. LPLU is used 2796 * during Dx states where the power conservation is most 2797 * important. During driver activity we should enable 2798 * SmartSpeed, so performance is maintained. 2799 */ 2800 if (phy->smart_speed == e1000_smart_speed_on) { 2801 ret_val = phy->ops.read_reg(hw, 2802 IGP01E1000_PHY_PORT_CONFIG, 2803 &data); 2804 if (ret_val) 2805 return ret_val; 2806 2807 data |= IGP01E1000_PSCFR_SMART_SPEED; 2808 ret_val = phy->ops.write_reg(hw, 2809 IGP01E1000_PHY_PORT_CONFIG, 2810 data); 2811 if (ret_val) 2812 return ret_val; 2813 } else if (phy->smart_speed == e1000_smart_speed_off) { 2814 ret_val = phy->ops.read_reg(hw, 2815 IGP01E1000_PHY_PORT_CONFIG, 2816 &data); 2817 if (ret_val) 2818 return ret_val; 2819 2820 data &= ~IGP01E1000_PSCFR_SMART_SPEED; 2821 ret_val = phy->ops.write_reg(hw, 2822 IGP01E1000_PHY_PORT_CONFIG, 2823 data); 2824 if (ret_val) 2825 return ret_val; 2826 } 2827 } 2828 2829 return E1000_SUCCESS; 2830 } 2831 2832 /** 2833 * e1000_set_d3_lplu_state_ich8lan - Set Low Power Linkup D3 state 2834 * @hw: pointer to the HW structure 2835 * @active: TRUE to enable LPLU, FALSE to disable 2836 * 2837 * Sets the LPLU D3 state according to the active flag. When 2838 * activating LPLU this function also disables smart speed 2839 * and vice versa. LPLU will not be activated unless the 2840 * device autonegotiation advertisement meets standards of 2841 * either 10 or 10/100 or 10/100/1000 at all duplexes. 2842 * This is a function pointer entry point only called by 2843 * PHY setup routines. 2844 **/ 2845 static s32 e1000_set_d3_lplu_state_ich8lan(struct e1000_hw *hw, bool active) 2846 { 2847 struct e1000_phy_info *phy = &hw->phy; 2848 u32 phy_ctrl; 2849 s32 ret_val = E1000_SUCCESS; 2850 u16 data; 2851 2852 DEBUGFUNC("e1000_set_d3_lplu_state_ich8lan"); 2853 2854 phy_ctrl = E1000_READ_REG(hw, E1000_PHY_CTRL); 2855 2856 if (!active) { 2857 phy_ctrl &= ~E1000_PHY_CTRL_NOND0A_LPLU; 2858 E1000_WRITE_REG(hw, E1000_PHY_CTRL, phy_ctrl); 2859 2860 if (phy->type != e1000_phy_igp_3) 2861 return E1000_SUCCESS; 2862 2863 /* LPLU and SmartSpeed are mutually exclusive. LPLU is used 2864 * during Dx states where the power conservation is most 2865 * important. During driver activity we should enable 2866 * SmartSpeed, so performance is maintained. 2867 */ 2868 if (phy->smart_speed == e1000_smart_speed_on) { 2869 ret_val = phy->ops.read_reg(hw, 2870 IGP01E1000_PHY_PORT_CONFIG, 2871 &data); 2872 if (ret_val) 2873 return ret_val; 2874 2875 data |= IGP01E1000_PSCFR_SMART_SPEED; 2876 ret_val = phy->ops.write_reg(hw, 2877 IGP01E1000_PHY_PORT_CONFIG, 2878 data); 2879 if (ret_val) 2880 return ret_val; 2881 } else if (phy->smart_speed == e1000_smart_speed_off) { 2882 ret_val = phy->ops.read_reg(hw, 2883 IGP01E1000_PHY_PORT_CONFIG, 2884 &data); 2885 if (ret_val) 2886 return ret_val; 2887 2888 data &= ~IGP01E1000_PSCFR_SMART_SPEED; 2889 ret_val = phy->ops.write_reg(hw, 2890 IGP01E1000_PHY_PORT_CONFIG, 2891 data); 2892 if (ret_val) 2893 return ret_val; 2894 } 2895 } else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) || 2896 (phy->autoneg_advertised == E1000_ALL_NOT_GIG) || 2897 (phy->autoneg_advertised == E1000_ALL_10_SPEED)) { 2898 phy_ctrl |= E1000_PHY_CTRL_NOND0A_LPLU; 2899 E1000_WRITE_REG(hw, E1000_PHY_CTRL, phy_ctrl); 2900 2901 if (phy->type != e1000_phy_igp_3) 2902 return E1000_SUCCESS; 2903 2904 /* Call gig speed drop workaround on LPLU before accessing 2905 * any PHY registers 2906 */ 2907 if (hw->mac.type == e1000_ich8lan) 2908 e1000_gig_downshift_workaround_ich8lan(hw); 2909 2910 /* When LPLU is enabled, we should disable SmartSpeed */ 2911 ret_val = phy->ops.read_reg(hw, 2912 IGP01E1000_PHY_PORT_CONFIG, 2913 &data); 2914 if (ret_val) 2915 return ret_val; 2916 2917 data &= ~IGP01E1000_PSCFR_SMART_SPEED; 2918 ret_val = phy->ops.write_reg(hw, 2919 IGP01E1000_PHY_PORT_CONFIG, 2920 data); 2921 } 2922 2923 return ret_val; 2924 } 2925 2926 /** 2927 * e1000_valid_nvm_bank_detect_ich8lan - finds out the valid bank 0 or 1 2928 * @hw: pointer to the HW structure 2929 * @bank: pointer to the variable that returns the active bank 2930 * 2931 * Reads signature byte from the NVM using the flash access registers. 2932 * Word 0x13 bits 15:14 = 10b indicate a valid signature for that bank. 2933 **/ 2934 static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank) 2935 { 2936 u32 eecd; 2937 struct e1000_nvm_info *nvm = &hw->nvm; 2938 u32 bank1_offset = nvm->flash_bank_size * sizeof(u16); 2939 u32 act_offset = E1000_ICH_NVM_SIG_WORD * 2 + 1; 2940 u8 sig_byte = 0; 2941 s32 ret_val; 2942 2943 DEBUGFUNC("e1000_valid_nvm_bank_detect_ich8lan"); 2944 2945 switch (hw->mac.type) { 2946 case e1000_ich8lan: 2947 case e1000_ich9lan: 2948 eecd = E1000_READ_REG(hw, E1000_EECD); 2949 if ((eecd & E1000_EECD_SEC1VAL_VALID_MASK) == 2950 E1000_EECD_SEC1VAL_VALID_MASK) { 2951 if (eecd & E1000_EECD_SEC1VAL) 2952 *bank = 1; 2953 else 2954 *bank = 0; 2955 2956 return E1000_SUCCESS; 2957 } 2958 DEBUGOUT("Unable to determine valid NVM bank via EEC - reading flash signature\n"); 2959 /* fall-thru */ 2960 default: 2961 /* set bank to 0 in case flash read fails */ 2962 *bank = 0; 2963 2964 /* Check bank 0 */ 2965 ret_val = e1000_read_flash_byte_ich8lan(hw, act_offset, 2966 &sig_byte); 2967 if (ret_val) 2968 return ret_val; 2969 if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) == 2970 E1000_ICH_NVM_SIG_VALUE) { 2971 *bank = 0; 2972 return E1000_SUCCESS; 2973 } 2974 2975 /* Check bank 1 */ 2976 ret_val = e1000_read_flash_byte_ich8lan(hw, act_offset + 2977 bank1_offset, 2978 &sig_byte); 2979 if (ret_val) 2980 return ret_val; 2981 if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) == 2982 E1000_ICH_NVM_SIG_VALUE) { 2983 *bank = 1; 2984 return E1000_SUCCESS; 2985 } 2986 2987 DEBUGOUT("ERROR: No valid NVM bank present\n"); 2988 return -E1000_ERR_NVM; 2989 } 2990 } 2991 2992 /** 2993 * e1000_read_nvm_ich8lan - Read word(s) from the NVM 2994 * @hw: pointer to the HW structure 2995 * @offset: The offset (in bytes) of the word(s) to read. 2996 * @words: Size of data to read in words 2997 * @data: Pointer to the word(s) to read at offset. 2998 * 2999 * Reads a word(s) from the NVM using the flash access registers. 3000 **/ 3001 static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, 3002 u16 *data) 3003 { 3004 struct e1000_nvm_info *nvm = &hw->nvm; 3005 struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; 3006 u32 act_offset; 3007 s32 ret_val = E1000_SUCCESS; 3008 u32 bank = 0; 3009 u16 i, word; 3010 3011 DEBUGFUNC("e1000_read_nvm_ich8lan"); 3012 3013 if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) || 3014 (words == 0)) { 3015 DEBUGOUT("nvm parameter(s) out of bounds\n"); 3016 ret_val = -E1000_ERR_NVM; 3017 goto out; 3018 } 3019 3020 nvm->ops.acquire(hw); 3021 3022 ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank); 3023 if (ret_val != E1000_SUCCESS) { 3024 DEBUGOUT("Could not detect valid bank, assuming bank 0\n"); 3025 bank = 0; 3026 } 3027 3028 act_offset = (bank) ? nvm->flash_bank_size : 0; 3029 act_offset += offset; 3030 3031 ret_val = E1000_SUCCESS; 3032 for (i = 0; i < words; i++) { 3033 if (dev_spec->shadow_ram[offset+i].modified) { 3034 data[i] = dev_spec->shadow_ram[offset+i].value; 3035 } else { 3036 ret_val = e1000_read_flash_word_ich8lan(hw, 3037 act_offset + i, 3038 &word); 3039 if (ret_val) 3040 break; 3041 data[i] = word; 3042 } 3043 } 3044 3045 nvm->ops.release(hw); 3046 3047 out: 3048 if (ret_val) 3049 DEBUGOUT1("NVM read error: %d\n", ret_val); 3050 3051 return ret_val; 3052 } 3053 3054 /** 3055 * e1000_flash_cycle_init_ich8lan - Initialize flash 3056 * @hw: pointer to the HW structure 3057 * 3058 * This function does initial flash setup so that a new read/write/erase cycle 3059 * can be started. 3060 **/ 3061 static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw) 3062 { 3063 union ich8_hws_flash_status hsfsts; 3064 s32 ret_val = -E1000_ERR_NVM; 3065 3066 DEBUGFUNC("e1000_flash_cycle_init_ich8lan"); 3067 3068 hsfsts.regval = E1000_READ_FLASH_REG16(hw, ICH_FLASH_HSFSTS); 3069 3070 /* Check if the flash descriptor is valid */ 3071 if (!hsfsts.hsf_status.fldesvalid) { 3072 DEBUGOUT("Flash descriptor invalid. SW Sequencing must be used.\n"); 3073 return -E1000_ERR_NVM; 3074 } 3075 3076 /* Clear FCERR and DAEL in hw status by writing 1 */ 3077 hsfsts.hsf_status.flcerr = 1; 3078 hsfsts.hsf_status.dael = 1; 3079 3080 E1000_WRITE_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval); 3081 3082 /* Either we should have a hardware SPI cycle in progress 3083 * bit to check against, in order to start a new cycle or 3084 * FDONE bit should be changed in the hardware so that it 3085 * is 1 after hardware reset, which can then be used as an 3086 * indication whether a cycle is in progress or has been 3087 * completed. 3088 */ 3089 3090 if (!hsfsts.hsf_status.flcinprog) { 3091 /* There is no cycle running at present, 3092 * so we can start a cycle. 3093 * Begin by setting Flash Cycle Done. 3094 */ 3095 hsfsts.hsf_status.flcdone = 1; 3096 E1000_WRITE_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval); 3097 ret_val = E1000_SUCCESS; 3098 } else { 3099 s32 i; 3100 3101 /* Otherwise poll for sometime so the current 3102 * cycle has a chance to end before giving up. 3103 */ 3104 for (i = 0; i < ICH_FLASH_READ_COMMAND_TIMEOUT; i++) { 3105 hsfsts.regval = E1000_READ_FLASH_REG16(hw, 3106 ICH_FLASH_HSFSTS); 3107 if (!hsfsts.hsf_status.flcinprog) { 3108 ret_val = E1000_SUCCESS; 3109 break; 3110 } 3111 usec_delay(1); 3112 } 3113 if (ret_val == E1000_SUCCESS) { 3114 /* Successful in waiting for previous cycle to timeout, 3115 * now set the Flash Cycle Done. 3116 */ 3117 hsfsts.hsf_status.flcdone = 1; 3118 E1000_WRITE_FLASH_REG16(hw, ICH_FLASH_HSFSTS, 3119 hsfsts.regval); 3120 } else { 3121 DEBUGOUT("Flash controller busy, cannot get access\n"); 3122 } 3123 } 3124 3125 return ret_val; 3126 } 3127 3128 /** 3129 * e1000_flash_cycle_ich8lan - Starts flash cycle (read/write/erase) 3130 * @hw: pointer to the HW structure 3131 * @timeout: maximum time to wait for completion 3132 * 3133 * This function starts a flash cycle and waits for its completion. 3134 **/ 3135 static s32 e1000_flash_cycle_ich8lan(struct e1000_hw *hw, u32 timeout) 3136 { 3137 union ich8_hws_flash_ctrl hsflctl; 3138 union ich8_hws_flash_status hsfsts; 3139 u32 i = 0; 3140 3141 DEBUGFUNC("e1000_flash_cycle_ich8lan"); 3142 3143 /* Start a cycle by writing 1 in Flash Cycle Go in Hw Flash Control */ 3144 hsflctl.regval = E1000_READ_FLASH_REG16(hw, ICH_FLASH_HSFCTL); 3145 hsflctl.hsf_ctrl.flcgo = 1; 3146 E1000_WRITE_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval); 3147 3148 /* wait till FDONE bit is set to 1 */ 3149 do { 3150 hsfsts.regval = E1000_READ_FLASH_REG16(hw, ICH_FLASH_HSFSTS); 3151 if (hsfsts.hsf_status.flcdone) 3152 break; 3153 usec_delay(1); 3154 } while (i++ < timeout); 3155 3156 if (hsfsts.hsf_status.flcdone && !hsfsts.hsf_status.flcerr) 3157 return E1000_SUCCESS; 3158 3159 return -E1000_ERR_NVM; 3160 } 3161 3162 /** 3163 * e1000_read_flash_word_ich8lan - Read word from flash 3164 * @hw: pointer to the HW structure 3165 * @offset: offset to data location 3166 * @data: pointer to the location for storing the data 3167 * 3168 * Reads the flash word at offset into data. Offset is converted 3169 * to bytes before read. 3170 **/ 3171 static s32 e1000_read_flash_word_ich8lan(struct e1000_hw *hw, u32 offset, 3172 u16 *data) 3173 { 3174 DEBUGFUNC("e1000_read_flash_word_ich8lan"); 3175 3176 if (!data) 3177 return -E1000_ERR_NVM; 3178 3179 /* Must convert offset into bytes. */ 3180 offset <<= 1; 3181 3182 return e1000_read_flash_data_ich8lan(hw, offset, 2, data); 3183 } 3184 3185 /** 3186 * e1000_read_flash_byte_ich8lan - Read byte from flash 3187 * @hw: pointer to the HW structure 3188 * @offset: The offset of the byte to read. 3189 * @data: Pointer to a byte to store the value read. 3190 * 3191 * Reads a single byte from the NVM using the flash access registers. 3192 **/ 3193 static s32 e1000_read_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset, 3194 u8 *data) 3195 { 3196 s32 ret_val; 3197 u16 word = 0; 3198 3199 ret_val = e1000_read_flash_data_ich8lan(hw, offset, 1, &word); 3200 if (ret_val) 3201 return ret_val; 3202 3203 *data = (u8)word; 3204 3205 return E1000_SUCCESS; 3206 } 3207 3208 /** 3209 * e1000_read_flash_data_ich8lan - Read byte or word from NVM 3210 * @hw: pointer to the HW structure 3211 * @offset: The offset (in bytes) of the byte or word to read. 3212 * @size: Size of data to read, 1=byte 2=word 3213 * @data: Pointer to the word to store the value read. 3214 * 3215 * Reads a byte or word from the NVM using the flash access registers. 3216 **/ 3217 static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, 3218 u8 size, u16 *data) 3219 { 3220 union ich8_hws_flash_status hsfsts; 3221 union ich8_hws_flash_ctrl hsflctl; 3222 u32 flash_linear_addr; 3223 u32 flash_data = 0; 3224 s32 ret_val = -E1000_ERR_NVM; 3225 u8 count = 0; 3226 3227 DEBUGFUNC("e1000_read_flash_data_ich8lan"); 3228 3229 if (size < 1 || size > 2 || offset > ICH_FLASH_LINEAR_ADDR_MASK) 3230 return -E1000_ERR_NVM; 3231 3232 flash_linear_addr = ((ICH_FLASH_LINEAR_ADDR_MASK & offset) + 3233 hw->nvm.flash_base_addr); 3234 3235 do { 3236 usec_delay(1); 3237 /* Steps */ 3238 ret_val = e1000_flash_cycle_init_ich8lan(hw); 3239 if (ret_val != E1000_SUCCESS) 3240 break; 3241 3242 hsflctl.regval = E1000_READ_FLASH_REG16(hw, ICH_FLASH_HSFCTL); 3243 /* 0b/1b corresponds to 1 or 2 byte size, respectively. */ 3244 hsflctl.hsf_ctrl.fldbcount = size - 1; 3245 hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_READ; 3246 E1000_WRITE_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval); 3247 3248 E1000_WRITE_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_addr); 3249 3250 ret_val = 3251 e1000_flash_cycle_ich8lan(hw, 3252 ICH_FLASH_READ_COMMAND_TIMEOUT); 3253 3254 /* Check if FCERR is set to 1, if set to 1, clear it 3255 * and try the whole sequence a few more times, else 3256 * read in (shift in) the Flash Data0, the order is 3257 * least significant byte first msb to lsb 3258 */ 3259 if (ret_val == E1000_SUCCESS) { 3260 flash_data = E1000_READ_FLASH_REG(hw, ICH_FLASH_FDATA0); 3261 if (size == 1) 3262 *data = (u8)(flash_data & 0x000000FF); 3263 else if (size == 2) 3264 *data = (u16)(flash_data & 0x0000FFFF); 3265 break; 3266 } else { 3267 /* If we've gotten here, then things are probably 3268 * completely hosed, but if the error condition is 3269 * detected, it won't hurt to give it another try... 3270 * ICH_FLASH_CYCLE_REPEAT_COUNT times. 3271 */ 3272 hsfsts.regval = E1000_READ_FLASH_REG16(hw, 3273 ICH_FLASH_HSFSTS); 3274 if (hsfsts.hsf_status.flcerr) { 3275 /* Repeat for some time before giving up. */ 3276 continue; 3277 } else if (!hsfsts.hsf_status.flcdone) { 3278 DEBUGOUT("Timeout error - flash cycle did not complete.\n"); 3279 break; 3280 } 3281 } 3282 } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT); 3283 3284 return ret_val; 3285 } 3286 3287 /** 3288 * e1000_write_nvm_ich8lan - Write word(s) to the NVM 3289 * @hw: pointer to the HW structure 3290 * @offset: The offset (in bytes) of the word(s) to write. 3291 * @words: Size of data to write in words 3292 * @data: Pointer to the word(s) to write at offset. 3293 * 3294 * Writes a byte or word to the NVM using the flash access registers. 3295 **/ 3296 static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, 3297 u16 *data) 3298 { 3299 struct e1000_nvm_info *nvm = &hw->nvm; 3300 struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; 3301 u16 i; 3302 3303 DEBUGFUNC("e1000_write_nvm_ich8lan"); 3304 3305 if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) || 3306 (words == 0)) { 3307 DEBUGOUT("nvm parameter(s) out of bounds\n"); 3308 return -E1000_ERR_NVM; 3309 } 3310 3311 nvm->ops.acquire(hw); 3312 3313 for (i = 0; i < words; i++) { 3314 dev_spec->shadow_ram[offset+i].modified = TRUE; 3315 dev_spec->shadow_ram[offset+i].value = data[i]; 3316 } 3317 3318 nvm->ops.release(hw); 3319 3320 return E1000_SUCCESS; 3321 } 3322 3323 /** 3324 * e1000_update_nvm_checksum_ich8lan - Update the checksum for NVM 3325 * @hw: pointer to the HW structure 3326 * 3327 * The NVM checksum is updated by calling the generic update_nvm_checksum, 3328 * which writes the checksum to the shadow ram. The changes in the shadow 3329 * ram are then committed to the EEPROM by processing each bank at a time 3330 * checking for the modified bit and writing only the pending changes. 3331 * After a successful commit, the shadow ram is cleared and is ready for 3332 * future writes. 3333 **/ 3334 static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) 3335 { 3336 struct e1000_nvm_info *nvm = &hw->nvm; 3337 struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; 3338 u32 i, act_offset, new_bank_offset, old_bank_offset, bank; 3339 s32 ret_val; 3340 u16 data; 3341 3342 DEBUGFUNC("e1000_update_nvm_checksum_ich8lan"); 3343 3344 ret_val = e1000_update_nvm_checksum_generic(hw); 3345 if (ret_val) 3346 goto out; 3347 3348 if (nvm->type != e1000_nvm_flash_sw) 3349 goto out; 3350 3351 nvm->ops.acquire(hw); 3352 3353 /* We're writing to the opposite bank so if we're on bank 1, 3354 * write to bank 0 etc. We also need to erase the segment that 3355 * is going to be written 3356 */ 3357 ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank); 3358 if (ret_val != E1000_SUCCESS) { 3359 DEBUGOUT("Could not detect valid bank, assuming bank 0\n"); 3360 bank = 0; 3361 } 3362 3363 if (bank == 0) { 3364 new_bank_offset = nvm->flash_bank_size; 3365 old_bank_offset = 0; 3366 ret_val = e1000_erase_flash_bank_ich8lan(hw, 1); 3367 if (ret_val) 3368 goto release; 3369 } else { 3370 old_bank_offset = nvm->flash_bank_size; 3371 new_bank_offset = 0; 3372 ret_val = e1000_erase_flash_bank_ich8lan(hw, 0); 3373 if (ret_val) 3374 goto release; 3375 } 3376 3377 for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) { 3378 /* Determine whether to write the value stored 3379 * in the other NVM bank or a modified value stored 3380 * in the shadow RAM 3381 */ 3382 if (dev_spec->shadow_ram[i].modified) { 3383 data = dev_spec->shadow_ram[i].value; 3384 } else { 3385 ret_val = e1000_read_flash_word_ich8lan(hw, i + 3386 old_bank_offset, 3387 &data); 3388 if (ret_val) 3389 break; 3390 } 3391 3392 /* If the word is 0x13, then make sure the signature bits 3393 * (15:14) are 11b until the commit has completed. 3394 * This will allow us to write 10b which indicates the 3395 * signature is valid. We want to do this after the write 3396 * has completed so that we don't mark the segment valid 3397 * while the write is still in progress 3398 */ 3399 if (i == E1000_ICH_NVM_SIG_WORD) 3400 data |= E1000_ICH_NVM_SIG_MASK; 3401 3402 /* Convert offset to bytes. */ 3403 act_offset = (i + new_bank_offset) << 1; 3404 3405 usec_delay(100); 3406 /* Write the bytes to the new bank. */ 3407 ret_val = e1000_retry_write_flash_byte_ich8lan(hw, 3408 act_offset, 3409 (u8)data); 3410 if (ret_val) 3411 break; 3412 3413 usec_delay(100); 3414 ret_val = e1000_retry_write_flash_byte_ich8lan(hw, 3415 act_offset + 1, 3416 (u8)(data >> 8)); 3417 if (ret_val) 3418 break; 3419 } 3420 3421 /* Don't bother writing the segment valid bits if sector 3422 * programming failed. 3423 */ 3424 if (ret_val) { 3425 DEBUGOUT("Flash commit failed.\n"); 3426 goto release; 3427 } 3428 3429 /* Finally validate the new segment by setting bit 15:14 3430 * to 10b in word 0x13 , this can be done without an 3431 * erase as well since these bits are 11 to start with 3432 * and we need to change bit 14 to 0b 3433 */ 3434 act_offset = new_bank_offset + E1000_ICH_NVM_SIG_WORD; 3435 ret_val = e1000_read_flash_word_ich8lan(hw, act_offset, &data); 3436 if (ret_val) 3437 goto release; 3438 3439 data &= 0xBFFF; 3440 ret_val = e1000_retry_write_flash_byte_ich8lan(hw, 3441 act_offset * 2 + 1, 3442 (u8)(data >> 8)); 3443 if (ret_val) 3444 goto release; 3445 3446 /* And invalidate the previously valid segment by setting 3447 * its signature word (0x13) high_byte to 0b. This can be 3448 * done without an erase because flash erase sets all bits 3449 * to 1's. We can write 1's to 0's without an erase 3450 */ 3451 act_offset = (old_bank_offset + E1000_ICH_NVM_SIG_WORD) * 2 + 1; 3452 ret_val = e1000_retry_write_flash_byte_ich8lan(hw, act_offset, 0); 3453 if (ret_val) 3454 goto release; 3455 3456 /* Great! Everything worked, we can now clear the cached entries. */ 3457 for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) { 3458 dev_spec->shadow_ram[i].modified = FALSE; 3459 dev_spec->shadow_ram[i].value = 0xFFFF; 3460 } 3461 3462 release: 3463 nvm->ops.release(hw); 3464 3465 /* Reload the EEPROM, or else modifications will not appear 3466 * until after the next adapter reset. 3467 */ 3468 if (!ret_val) { 3469 nvm->ops.reload(hw); 3470 msec_delay(10); 3471 } 3472 3473 out: 3474 if (ret_val) 3475 DEBUGOUT1("NVM update error: %d\n", ret_val); 3476 3477 return ret_val; 3478 } 3479 3480 /** 3481 * e1000_validate_nvm_checksum_ich8lan - Validate EEPROM checksum 3482 * @hw: pointer to the HW structure 3483 * 3484 * Check to see if checksum needs to be fixed by reading bit 6 in word 0x19. 3485 * If the bit is 0, that the EEPROM had been modified, but the checksum was not 3486 * calculated, in which case we need to calculate the checksum and set bit 6. 3487 **/ 3488 static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw) 3489 { 3490 s32 ret_val; 3491 u16 data; 3492 u16 word; 3493 u16 valid_csum_mask; 3494 3495 DEBUGFUNC("e1000_validate_nvm_checksum_ich8lan"); 3496 3497 /* Read NVM and check Invalid Image CSUM bit. If this bit is 0, 3498 * the checksum needs to be fixed. This bit is an indication that 3499 * the NVM was prepared by OEM software and did not calculate 3500 * the checksum...a likely scenario. 3501 */ 3502 switch (hw->mac.type) { 3503 case e1000_pch_lpt: 3504 word = NVM_COMPAT; 3505 valid_csum_mask = NVM_COMPAT_VALID_CSUM; 3506 break; 3507 default: 3508 word = NVM_FUTURE_INIT_WORD1; 3509 valid_csum_mask = NVM_FUTURE_INIT_WORD1_VALID_CSUM; 3510 break; 3511 } 3512 3513 ret_val = hw->nvm.ops.read(hw, word, 1, &data); 3514 if (ret_val) 3515 return ret_val; 3516 3517 if (!(data & valid_csum_mask)) { 3518 data |= valid_csum_mask; 3519 ret_val = hw->nvm.ops.write(hw, word, 1, &data); 3520 if (ret_val) 3521 return ret_val; 3522 ret_val = hw->nvm.ops.update(hw); 3523 if (ret_val) 3524 return ret_val; 3525 } 3526 3527 return e1000_validate_nvm_checksum_generic(hw); 3528 } 3529 3530 /** 3531 * e1000_write_flash_data_ich8lan - Writes bytes to the NVM 3532 * @hw: pointer to the HW structure 3533 * @offset: The offset (in bytes) of the byte/word to read. 3534 * @size: Size of data to read, 1=byte 2=word 3535 * @data: The byte(s) to write to the NVM. 3536 * 3537 * Writes one/two bytes to the NVM using the flash access registers. 3538 **/ 3539 static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, 3540 u8 size, u16 data) 3541 { 3542 union ich8_hws_flash_status hsfsts; 3543 union ich8_hws_flash_ctrl hsflctl; 3544 u32 flash_linear_addr; 3545 u32 flash_data = 0; 3546 s32 ret_val; 3547 u8 count = 0; 3548 3549 DEBUGFUNC("e1000_write_ich8_data"); 3550 3551 if (size < 1 || size > 2 || data > size * 0xff || 3552 offset > ICH_FLASH_LINEAR_ADDR_MASK) 3553 return -E1000_ERR_NVM; 3554 3555 flash_linear_addr = ((ICH_FLASH_LINEAR_ADDR_MASK & offset) + 3556 hw->nvm.flash_base_addr); 3557 3558 do { 3559 usec_delay(1); 3560 /* Steps */ 3561 ret_val = e1000_flash_cycle_init_ich8lan(hw); 3562 if (ret_val != E1000_SUCCESS) 3563 break; 3564 3565 hsflctl.regval = E1000_READ_FLASH_REG16(hw, ICH_FLASH_HSFCTL); 3566 /* 0b/1b corresponds to 1 or 2 byte size, respectively. */ 3567 hsflctl.hsf_ctrl.fldbcount = size - 1; 3568 hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_WRITE; 3569 E1000_WRITE_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval); 3570 3571 E1000_WRITE_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_addr); 3572 3573 if (size == 1) 3574 flash_data = (u32)data & 0x00FF; 3575 else 3576 flash_data = (u32)data; 3577 3578 E1000_WRITE_FLASH_REG(hw, ICH_FLASH_FDATA0, flash_data); 3579 3580 /* check if FCERR is set to 1 , if set to 1, clear it 3581 * and try the whole sequence a few more times else done 3582 */ 3583 ret_val = 3584 e1000_flash_cycle_ich8lan(hw, 3585 ICH_FLASH_WRITE_COMMAND_TIMEOUT); 3586 if (ret_val == E1000_SUCCESS) 3587 break; 3588 3589 /* If we're here, then things are most likely 3590 * completely hosed, but if the error condition 3591 * is detected, it won't hurt to give it another 3592 * try...ICH_FLASH_CYCLE_REPEAT_COUNT times. 3593 */ 3594 hsfsts.regval = E1000_READ_FLASH_REG16(hw, ICH_FLASH_HSFSTS); 3595 if (hsfsts.hsf_status.flcerr) 3596 /* Repeat for some time before giving up. */ 3597 continue; 3598 if (!hsfsts.hsf_status.flcdone) { 3599 DEBUGOUT("Timeout error - flash cycle did not complete.\n"); 3600 break; 3601 } 3602 } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT); 3603 3604 return ret_val; 3605 } 3606 3607 /** 3608 * e1000_write_flash_byte_ich8lan - Write a single byte to NVM 3609 * @hw: pointer to the HW structure 3610 * @offset: The index of the byte to read. 3611 * @data: The byte to write to the NVM. 3612 * 3613 * Writes a single byte to the NVM using the flash access registers. 3614 **/ 3615 static s32 e1000_write_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset, 3616 u8 data) 3617 { 3618 u16 word = (u16)data; 3619 3620 DEBUGFUNC("e1000_write_flash_byte_ich8lan"); 3621 3622 return e1000_write_flash_data_ich8lan(hw, offset, 1, word); 3623 } 3624 3625 /** 3626 * e1000_retry_write_flash_byte_ich8lan - Writes a single byte to NVM 3627 * @hw: pointer to the HW structure 3628 * @offset: The offset of the byte to write. 3629 * @byte: The byte to write to the NVM. 3630 * 3631 * Writes a single byte to the NVM using the flash access registers. 3632 * Goes through a retry algorithm before giving up. 3633 **/ 3634 static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw, 3635 u32 offset, u8 byte) 3636 { 3637 s32 ret_val; 3638 u16 program_retries; 3639 3640 DEBUGFUNC("e1000_retry_write_flash_byte_ich8lan"); 3641 3642 ret_val = e1000_write_flash_byte_ich8lan(hw, offset, byte); 3643 if (!ret_val) 3644 return ret_val; 3645 3646 for (program_retries = 0; program_retries < 100; program_retries++) { 3647 DEBUGOUT2("Retrying Byte %2.2X at offset %u\n", byte, offset); 3648 usec_delay(100); 3649 ret_val = e1000_write_flash_byte_ich8lan(hw, offset, byte); 3650 if (ret_val == E1000_SUCCESS) 3651 break; 3652 } 3653 if (program_retries == 100) 3654 return -E1000_ERR_NVM; 3655 3656 return E1000_SUCCESS; 3657 } 3658 3659 /** 3660 * e1000_erase_flash_bank_ich8lan - Erase a bank (4k) from NVM 3661 * @hw: pointer to the HW structure 3662 * @bank: 0 for first bank, 1 for second bank, etc. 3663 * 3664 * Erases the bank specified. Each bank is a 4k block. Banks are 0 based. 3665 * bank N is 4096 * N + flash_reg_addr. 3666 **/ 3667 static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank) 3668 { 3669 struct e1000_nvm_info *nvm = &hw->nvm; 3670 union ich8_hws_flash_status hsfsts; 3671 union ich8_hws_flash_ctrl hsflctl; 3672 u32 flash_linear_addr; 3673 /* bank size is in 16bit words - adjust to bytes */ 3674 u32 flash_bank_size = nvm->flash_bank_size * 2; 3675 s32 ret_val; 3676 s32 count = 0; 3677 s32 j, iteration, sector_size; 3678 3679 DEBUGFUNC("e1000_erase_flash_bank_ich8lan"); 3680 3681 hsfsts.regval = E1000_READ_FLASH_REG16(hw, ICH_FLASH_HSFSTS); 3682 3683 /* Determine HW Sector size: Read BERASE bits of hw flash status 3684 * register 3685 * 00: The Hw sector is 256 bytes, hence we need to erase 16 3686 * consecutive sectors. The start index for the nth Hw sector 3687 * can be calculated as = bank * 4096 + n * 256 3688 * 01: The Hw sector is 4K bytes, hence we need to erase 1 sector. 3689 * The start index for the nth Hw sector can be calculated 3690 * as = bank * 4096 3691 * 10: The Hw sector is 8K bytes, nth sector = bank * 8192 3692 * (ich9 only, otherwise error condition) 3693 * 11: The Hw sector is 64K bytes, nth sector = bank * 65536 3694 */ 3695 switch (hsfsts.hsf_status.berasesz) { 3696 case 0: 3697 /* Hw sector size 256 */ 3698 sector_size = ICH_FLASH_SEG_SIZE_256; 3699 iteration = flash_bank_size / ICH_FLASH_SEG_SIZE_256; 3700 break; 3701 case 1: 3702 sector_size = ICH_FLASH_SEG_SIZE_4K; 3703 iteration = 1; 3704 break; 3705 case 2: 3706 sector_size = ICH_FLASH_SEG_SIZE_8K; 3707 iteration = 1; 3708 break; 3709 case 3: 3710 sector_size = ICH_FLASH_SEG_SIZE_64K; 3711 iteration = 1; 3712 break; 3713 default: 3714 return -E1000_ERR_NVM; 3715 } 3716 3717 /* Start with the base address, then add the sector offset. */ 3718 flash_linear_addr = hw->nvm.flash_base_addr; 3719 flash_linear_addr += (bank) ? flash_bank_size : 0; 3720 3721 for (j = 0; j < iteration; j++) { 3722 do { 3723 u32 timeout = ICH_FLASH_ERASE_COMMAND_TIMEOUT; 3724 3725 /* Steps */ 3726 ret_val = e1000_flash_cycle_init_ich8lan(hw); 3727 if (ret_val) 3728 return ret_val; 3729 3730 /* Write a value 11 (block Erase) in Flash 3731 * Cycle field in hw flash control 3732 */ 3733 hsflctl.regval = E1000_READ_FLASH_REG16(hw, 3734 ICH_FLASH_HSFCTL); 3735 hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_ERASE; 3736 E1000_WRITE_FLASH_REG16(hw, ICH_FLASH_HSFCTL, 3737 hsflctl.regval); 3738 3739 /* Write the last 24 bits of an index within the 3740 * block into Flash Linear address field in Flash 3741 * Address. 3742 */ 3743 flash_linear_addr += (j * sector_size); 3744 E1000_WRITE_FLASH_REG(hw, ICH_FLASH_FADDR, 3745 flash_linear_addr); 3746 3747 ret_val = e1000_flash_cycle_ich8lan(hw, timeout); 3748 if (ret_val == E1000_SUCCESS) 3749 break; 3750 3751 /* Check if FCERR is set to 1. If 1, 3752 * clear it and try the whole sequence 3753 * a few more times else Done 3754 */ 3755 hsfsts.regval = E1000_READ_FLASH_REG16(hw, 3756 ICH_FLASH_HSFSTS); 3757 if (hsfsts.hsf_status.flcerr) 3758 /* repeat for some time before giving up */ 3759 continue; 3760 else if (!hsfsts.hsf_status.flcdone) 3761 return ret_val; 3762 } while (++count < ICH_FLASH_CYCLE_REPEAT_COUNT); 3763 } 3764 3765 return E1000_SUCCESS; 3766 } 3767 3768 /** 3769 * e1000_valid_led_default_ich8lan - Set the default LED settings 3770 * @hw: pointer to the HW structure 3771 * @data: Pointer to the LED settings 3772 * 3773 * Reads the LED default settings from the NVM to data. If the NVM LED 3774 * settings is all 0's or F's, set the LED default to a valid LED default 3775 * setting. 3776 **/ 3777 static s32 e1000_valid_led_default_ich8lan(struct e1000_hw *hw, u16 *data) 3778 { 3779 s32 ret_val; 3780 3781 DEBUGFUNC("e1000_valid_led_default_ich8lan"); 3782 3783 ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data); 3784 if (ret_val) { 3785 DEBUGOUT("NVM Read Error\n"); 3786 return ret_val; 3787 } 3788 3789 if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) 3790 *data = ID_LED_DEFAULT_ICH8LAN; 3791 3792 return E1000_SUCCESS; 3793 } 3794 3795 /** 3796 * e1000_id_led_init_pchlan - store LED configurations 3797 * @hw: pointer to the HW structure 3798 * 3799 * PCH does not control LEDs via the LEDCTL register, rather it uses 3800 * the PHY LED configuration register. 3801 * 3802 * PCH also does not have an "always on" or "always off" mode which 3803 * complicates the ID feature. Instead of using the "on" mode to indicate 3804 * in ledctl_mode2 the LEDs to use for ID (see e1000_id_led_init_generic()), 3805 * use "link_up" mode. The LEDs will still ID on request if there is no 3806 * link based on logic in e1000_led_[on|off]_pchlan(). 3807 **/ 3808 static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw) 3809 { 3810 struct e1000_mac_info *mac = &hw->mac; 3811 s32 ret_val; 3812 const u32 ledctl_on = E1000_LEDCTL_MODE_LINK_UP; 3813 const u32 ledctl_off = E1000_LEDCTL_MODE_LINK_UP | E1000_PHY_LED0_IVRT; 3814 u16 data, i, temp, shift; 3815 3816 DEBUGFUNC("e1000_id_led_init_pchlan"); 3817 3818 /* Get default ID LED modes */ 3819 ret_val = hw->nvm.ops.valid_led_default(hw, &data); 3820 if (ret_val) 3821 return ret_val; 3822 3823 mac->ledctl_default = E1000_READ_REG(hw, E1000_LEDCTL); 3824 mac->ledctl_mode1 = mac->ledctl_default; 3825 mac->ledctl_mode2 = mac->ledctl_default; 3826 3827 for (i = 0; i < 4; i++) { 3828 temp = (data >> (i << 2)) & E1000_LEDCTL_LED0_MODE_MASK; 3829 shift = (i * 5); 3830 switch (temp) { 3831 case ID_LED_ON1_DEF2: 3832 case ID_LED_ON1_ON2: 3833 case ID_LED_ON1_OFF2: 3834 mac->ledctl_mode1 &= ~(E1000_PHY_LED0_MASK << shift); 3835 mac->ledctl_mode1 |= (ledctl_on << shift); 3836 break; 3837 case ID_LED_OFF1_DEF2: 3838 case ID_LED_OFF1_ON2: 3839 case ID_LED_OFF1_OFF2: 3840 mac->ledctl_mode1 &= ~(E1000_PHY_LED0_MASK << shift); 3841 mac->ledctl_mode1 |= (ledctl_off << shift); 3842 break; 3843 default: 3844 /* Do nothing */ 3845 break; 3846 } 3847 switch (temp) { 3848 case ID_LED_DEF1_ON2: 3849 case ID_LED_ON1_ON2: 3850 case ID_LED_OFF1_ON2: 3851 mac->ledctl_mode2 &= ~(E1000_PHY_LED0_MASK << shift); 3852 mac->ledctl_mode2 |= (ledctl_on << shift); 3853 break; 3854 case ID_LED_DEF1_OFF2: 3855 case ID_LED_ON1_OFF2: 3856 case ID_LED_OFF1_OFF2: 3857 mac->ledctl_mode2 &= ~(E1000_PHY_LED0_MASK << shift); 3858 mac->ledctl_mode2 |= (ledctl_off << shift); 3859 break; 3860 default: 3861 /* Do nothing */ 3862 break; 3863 } 3864 } 3865 3866 return E1000_SUCCESS; 3867 } 3868 3869 /** 3870 * e1000_get_bus_info_ich8lan - Get/Set the bus type and width 3871 * @hw: pointer to the HW structure 3872 * 3873 * ICH8 use the PCI Express bus, but does not contain a PCI Express Capability 3874 * register, so the the bus width is hard coded. 3875 **/ 3876 static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw) 3877 { 3878 struct e1000_bus_info *bus = &hw->bus; 3879 s32 ret_val; 3880 3881 DEBUGFUNC("e1000_get_bus_info_ich8lan"); 3882 3883 ret_val = e1000_get_bus_info_pcie_generic(hw); 3884 3885 /* ICH devices are "PCI Express"-ish. They have 3886 * a configuration space, but do not contain 3887 * PCI Express Capability registers, so bus width 3888 * must be hardcoded. 3889 */ 3890 if (bus->width == e1000_bus_width_unknown) 3891 bus->width = e1000_bus_width_pcie_x1; 3892 3893 return ret_val; 3894 } 3895 3896 /** 3897 * e1000_reset_hw_ich8lan - Reset the hardware 3898 * @hw: pointer to the HW structure 3899 * 3900 * Does a full reset of the hardware which includes a reset of the PHY and 3901 * MAC. 3902 **/ 3903 static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) 3904 { 3905 struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; 3906 u16 kum_cfg; 3907 u32 ctrl, reg; 3908 s32 ret_val; 3909 3910 DEBUGFUNC("e1000_reset_hw_ich8lan"); 3911 3912 /* Prevent the PCI-E bus from sticking if there is no TLP connection 3913 * on the last TLP read/write transaction when MAC is reset. 3914 */ 3915 ret_val = e1000_disable_pcie_master_generic(hw); 3916 if (ret_val) 3917 DEBUGOUT("PCI-E Master disable polling has failed.\n"); 3918 3919 DEBUGOUT("Masking off all interrupts\n"); 3920 E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff); 3921 3922 /* Disable the Transmit and Receive units. Then delay to allow 3923 * any pending transactions to complete before we hit the MAC 3924 * with the global reset. 3925 */ 3926 E1000_WRITE_REG(hw, E1000_RCTL, 0); 3927 E1000_WRITE_REG(hw, E1000_TCTL, E1000_TCTL_PSP); 3928 E1000_WRITE_FLUSH(hw); 3929 3930 msec_delay(10); 3931 3932 /* Workaround for ICH8 bit corruption issue in FIFO memory */ 3933 if (hw->mac.type == e1000_ich8lan) { 3934 /* Set Tx and Rx buffer allocation to 8k apiece. */ 3935 E1000_WRITE_REG(hw, E1000_PBA, E1000_PBA_8K); 3936 /* Set Packet Buffer Size to 16k. */ 3937 E1000_WRITE_REG(hw, E1000_PBS, E1000_PBS_16K); 3938 } 3939 3940 if (hw->mac.type == e1000_pchlan) { 3941 /* Save the NVM K1 bit setting*/ 3942 ret_val = e1000_read_nvm(hw, E1000_NVM_K1_CONFIG, 1, &kum_cfg); 3943 if (ret_val) 3944 return ret_val; 3945 3946 if (kum_cfg & E1000_NVM_K1_ENABLE) 3947 dev_spec->nvm_k1_enabled = TRUE; 3948 else 3949 dev_spec->nvm_k1_enabled = FALSE; 3950 } 3951 3952 ctrl = E1000_READ_REG(hw, E1000_CTRL); 3953 3954 if (!hw->phy.ops.check_reset_block(hw)) { 3955 /* Full-chip reset requires MAC and PHY reset at the same 3956 * time to make sure the interface between MAC and the 3957 * external PHY is reset. 3958 */ 3959 ctrl |= E1000_CTRL_PHY_RST; 3960 3961 /* Gate automatic PHY configuration by hardware on 3962 * non-managed 82579 3963 */ 3964 if ((hw->mac.type == e1000_pch2lan) && 3965 !(E1000_READ_REG(hw, E1000_FWSM) & E1000_ICH_FWSM_FW_VALID)) 3966 e1000_gate_hw_phy_config_ich8lan(hw, TRUE); 3967 } 3968 ret_val = e1000_acquire_swflag_ich8lan(hw); 3969 DEBUGOUT("Issuing a global reset to ich8lan\n"); 3970 E1000_WRITE_REG(hw, E1000_CTRL, (ctrl | E1000_CTRL_RST)); 3971 /* cannot issue a flush here because it hangs the hardware */ 3972 msec_delay(20); 3973 3974 /* Set Phy Config Counter to 50msec */ 3975 if (hw->mac.type == e1000_pch2lan) { 3976 reg = E1000_READ_REG(hw, E1000_FEXTNVM3); 3977 reg &= ~E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK; 3978 reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC; 3979 E1000_WRITE_REG(hw, E1000_FEXTNVM3, reg); 3980 } 3981 3982 if (!ret_val) 3983 E1000_MUTEX_UNLOCK(&hw->dev_spec.ich8lan.swflag_mutex); 3984 3985 if (ctrl & E1000_CTRL_PHY_RST) { 3986 ret_val = hw->phy.ops.get_cfg_done(hw); 3987 if (ret_val) 3988 return ret_val; 3989 3990 ret_val = e1000_post_phy_reset_ich8lan(hw); 3991 if (ret_val) 3992 return ret_val; 3993 } 3994 3995 /* For PCH, this write will make sure that any noise 3996 * will be detected as a CRC error and be dropped rather than show up 3997 * as a bad packet to the DMA engine. 3998 */ 3999 if (hw->mac.type == e1000_pchlan) 4000 E1000_WRITE_REG(hw, E1000_CRC_OFFSET, 0x65656565); 4001 4002 E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff); 4003 E1000_READ_REG(hw, E1000_ICR); 4004 4005 reg = E1000_READ_REG(hw, E1000_KABGTXD); 4006 reg |= E1000_KABGTXD_BGSQLBIAS; 4007 E1000_WRITE_REG(hw, E1000_KABGTXD, reg); 4008 4009 return E1000_SUCCESS; 4010 } 4011 4012 /** 4013 * e1000_init_hw_ich8lan - Initialize the hardware 4014 * @hw: pointer to the HW structure 4015 * 4016 * Prepares the hardware for transmit and receive by doing the following: 4017 * - initialize hardware bits 4018 * - initialize LED identification 4019 * - setup receive address registers 4020 * - setup flow control 4021 * - setup transmit descriptors 4022 * - clear statistics 4023 **/ 4024 static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw) 4025 { 4026 struct e1000_mac_info *mac = &hw->mac; 4027 u32 ctrl_ext, txdctl, snoop; 4028 s32 ret_val; 4029 u16 i; 4030 4031 DEBUGFUNC("e1000_init_hw_ich8lan"); 4032 4033 e1000_initialize_hw_bits_ich8lan(hw); 4034 4035 /* Initialize identification LED */ 4036 ret_val = mac->ops.id_led_init(hw); 4037 /* An error is not fatal and we should not stop init due to this */ 4038 if (ret_val) 4039 DEBUGOUT("Error initializing identification LED\n"); 4040 4041 /* Setup the receive address. */ 4042 e1000_init_rx_addrs_generic(hw, mac->rar_entry_count); 4043 4044 /* Zero out the Multicast HASH table */ 4045 DEBUGOUT("Zeroing the MTA\n"); 4046 for (i = 0; i < mac->mta_reg_count; i++) 4047 E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0); 4048 4049 /* The 82578 Rx buffer will stall if wakeup is enabled in host and 4050 * the ME. Disable wakeup by clearing the host wakeup bit. 4051 * Reset the phy after disabling host wakeup to reset the Rx buffer. 4052 */ 4053 if (hw->phy.type == e1000_phy_82578) { 4054 hw->phy.ops.read_reg(hw, BM_PORT_GEN_CFG, &i); 4055 i &= ~BM_WUC_HOST_WU_BIT; 4056 hw->phy.ops.write_reg(hw, BM_PORT_GEN_CFG, i); 4057 ret_val = e1000_phy_hw_reset_ich8lan(hw); 4058 if (ret_val) 4059 return ret_val; 4060 } 4061 4062 /* Setup link and flow control */ 4063 ret_val = mac->ops.setup_link(hw); 4064 4065 /* Set the transmit descriptor write-back policy for both queues */ 4066 txdctl = E1000_READ_REG(hw, E1000_TXDCTL(0)); 4067 txdctl = ((txdctl & ~E1000_TXDCTL_WTHRESH) | 4068 E1000_TXDCTL_FULL_TX_DESC_WB); 4069 txdctl = ((txdctl & ~E1000_TXDCTL_PTHRESH) | 4070 E1000_TXDCTL_MAX_TX_DESC_PREFETCH); 4071 E1000_WRITE_REG(hw, E1000_TXDCTL(0), txdctl); 4072 txdctl = E1000_READ_REG(hw, E1000_TXDCTL(1)); 4073 txdctl = ((txdctl & ~E1000_TXDCTL_WTHRESH) | 4074 E1000_TXDCTL_FULL_TX_DESC_WB); 4075 txdctl = ((txdctl & ~E1000_TXDCTL_PTHRESH) | 4076 E1000_TXDCTL_MAX_TX_DESC_PREFETCH); 4077 E1000_WRITE_REG(hw, E1000_TXDCTL(1), txdctl); 4078 4079 /* ICH8 has opposite polarity of no_snoop bits. 4080 * By default, we should use snoop behavior. 4081 */ 4082 if (mac->type == e1000_ich8lan) 4083 snoop = PCIE_ICH8_SNOOP_ALL; 4084 else 4085 snoop = (u32) ~(PCIE_NO_SNOOP_ALL); 4086 e1000_set_pcie_no_snoop_generic(hw, snoop); 4087 4088 ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); 4089 ctrl_ext |= E1000_CTRL_EXT_RO_DIS; 4090 E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); 4091 4092 /* Clear all of the statistics registers (clear on read). It is 4093 * important that we do this after we have tried to establish link 4094 * because the symbol error count will increment wildly if there 4095 * is no link. 4096 */ 4097 e1000_clear_hw_cntrs_ich8lan(hw); 4098 4099 return ret_val; 4100 } 4101 4102 /** 4103 * e1000_initialize_hw_bits_ich8lan - Initialize required hardware bits 4104 * @hw: pointer to the HW structure 4105 * 4106 * Sets/Clears required hardware bits necessary for correctly setting up the 4107 * hardware for transmit and receive. 4108 **/ 4109 static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw) 4110 { 4111 u32 reg; 4112 4113 DEBUGFUNC("e1000_initialize_hw_bits_ich8lan"); 4114 4115 /* Extended Device Control */ 4116 reg = E1000_READ_REG(hw, E1000_CTRL_EXT); 4117 reg |= (1 << 22); 4118 /* Enable PHY low-power state when MAC is at D3 w/o WoL */ 4119 if (hw->mac.type >= e1000_pchlan) 4120 reg |= E1000_CTRL_EXT_PHYPDEN; 4121 E1000_WRITE_REG(hw, E1000_CTRL_EXT, reg); 4122 4123 /* Transmit Descriptor Control 0 */ 4124 reg = E1000_READ_REG(hw, E1000_TXDCTL(0)); 4125 reg |= (1 << 22); 4126 E1000_WRITE_REG(hw, E1000_TXDCTL(0), reg); 4127 4128 /* Transmit Descriptor Control 1 */ 4129 reg = E1000_READ_REG(hw, E1000_TXDCTL(1)); 4130 reg |= (1 << 22); 4131 E1000_WRITE_REG(hw, E1000_TXDCTL(1), reg); 4132 4133 /* Transmit Arbitration Control 0 */ 4134 reg = E1000_READ_REG(hw, E1000_TARC(0)); 4135 if (hw->mac.type == e1000_ich8lan) 4136 reg |= (1 << 28) | (1 << 29); 4137 reg |= (1 << 23) | (1 << 24) | (1 << 26) | (1 << 27); 4138 E1000_WRITE_REG(hw, E1000_TARC(0), reg); 4139 4140 /* Transmit Arbitration Control 1 */ 4141 reg = E1000_READ_REG(hw, E1000_TARC(1)); 4142 if (E1000_READ_REG(hw, E1000_TCTL) & E1000_TCTL_MULR) 4143 reg &= ~(1 << 28); 4144 else 4145 reg |= (1 << 28); 4146 reg |= (1 << 24) | (1 << 26) | (1 << 30); 4147 E1000_WRITE_REG(hw, E1000_TARC(1), reg); 4148 4149 /* Device Status */ 4150 if (hw->mac.type == e1000_ich8lan) { 4151 reg = E1000_READ_REG(hw, E1000_STATUS); 4152 reg &= ~(1U << 31); 4153 E1000_WRITE_REG(hw, E1000_STATUS, reg); 4154 } 4155 4156 /* work-around descriptor data corruption issue during nfs v2 udp 4157 * traffic, just disable the nfs filtering capability 4158 */ 4159 reg = E1000_READ_REG(hw, E1000_RFCTL); 4160 reg |= (E1000_RFCTL_NFSW_DIS | E1000_RFCTL_NFSR_DIS); 4161 4162 /* Disable IPv6 extension header parsing because some malformed 4163 * IPv6 headers can hang the Rx. 4164 */ 4165 if (hw->mac.type == e1000_ich8lan) 4166 reg |= (E1000_RFCTL_IPV6_EX_DIS | E1000_RFCTL_NEW_IPV6_EXT_DIS); 4167 E1000_WRITE_REG(hw, E1000_RFCTL, reg); 4168 4169 /* Enable ECC on Lynxpoint */ 4170 if (hw->mac.type == e1000_pch_lpt) { 4171 reg = E1000_READ_REG(hw, E1000_PBECCSTS); 4172 reg |= E1000_PBECCSTS_ECC_ENABLE; 4173 E1000_WRITE_REG(hw, E1000_PBECCSTS, reg); 4174 4175 reg = E1000_READ_REG(hw, E1000_CTRL); 4176 reg |= E1000_CTRL_MEHE; 4177 E1000_WRITE_REG(hw, E1000_CTRL, reg); 4178 } 4179 4180 return; 4181 } 4182 4183 /** 4184 * e1000_setup_link_ich8lan - Setup flow control and link settings 4185 * @hw: pointer to the HW structure 4186 * 4187 * Determines which flow control settings to use, then configures flow 4188 * control. Calls the appropriate media-specific link configuration 4189 * function. Assuming the adapter has a valid link partner, a valid link 4190 * should be established. Assumes the hardware has previously been reset 4191 * and the transmitter and receiver are not enabled. 4192 **/ 4193 static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw) 4194 { 4195 s32 ret_val; 4196 4197 DEBUGFUNC("e1000_setup_link_ich8lan"); 4198 4199 if (hw->phy.ops.check_reset_block(hw)) 4200 return E1000_SUCCESS; 4201 4202 /* ICH parts do not have a word in the NVM to determine 4203 * the default flow control setting, so we explicitly 4204 * set it to full. 4205 */ 4206 if (hw->fc.requested_mode == e1000_fc_default) 4207 hw->fc.requested_mode = e1000_fc_full; 4208 4209 /* Save off the requested flow control mode for use later. Depending 4210 * on the link partner's capabilities, we may or may not use this mode. 4211 */ 4212 hw->fc.current_mode = hw->fc.requested_mode; 4213 4214 DEBUGOUT1("After fix-ups FlowControl is now = %x\n", 4215 hw->fc.current_mode); 4216 4217 /* Continue to configure the copper link. */ 4218 ret_val = hw->mac.ops.setup_physical_interface(hw); 4219 if (ret_val) 4220 return ret_val; 4221 4222 E1000_WRITE_REG(hw, E1000_FCTTV, hw->fc.pause_time); 4223 if ((hw->phy.type == e1000_phy_82578) || 4224 (hw->phy.type == e1000_phy_82579) || 4225 (hw->phy.type == e1000_phy_i217) || 4226 (hw->phy.type == e1000_phy_82577)) { 4227 E1000_WRITE_REG(hw, E1000_FCRTV_PCH, hw->fc.refresh_time); 4228 4229 ret_val = hw->phy.ops.write_reg(hw, 4230 PHY_REG(BM_PORT_CTRL_PAGE, 27), 4231 hw->fc.pause_time); 4232 if (ret_val) 4233 return ret_val; 4234 } 4235 4236 return e1000_set_fc_watermarks_generic(hw); 4237 } 4238 4239 /** 4240 * e1000_setup_copper_link_ich8lan - Configure MAC/PHY interface 4241 * @hw: pointer to the HW structure 4242 * 4243 * Configures the kumeran interface to the PHY to wait the appropriate time 4244 * when polling the PHY, then call the generic setup_copper_link to finish 4245 * configuring the copper link. 4246 **/ 4247 static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw) 4248 { 4249 u32 ctrl; 4250 s32 ret_val; 4251 u16 reg_data; 4252 4253 DEBUGFUNC("e1000_setup_copper_link_ich8lan"); 4254 4255 ctrl = E1000_READ_REG(hw, E1000_CTRL); 4256 ctrl |= E1000_CTRL_SLU; 4257 ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); 4258 E1000_WRITE_REG(hw, E1000_CTRL, ctrl); 4259 4260 /* Set the mac to wait the maximum time between each iteration 4261 * and increase the max iterations when polling the phy; 4262 * this fixes erroneous timeouts at 10Mbps. 4263 */ 4264 ret_val = e1000_write_kmrn_reg_generic(hw, E1000_KMRNCTRLSTA_TIMEOUTS, 4265 0xFFFF); 4266 if (ret_val) 4267 return ret_val; 4268 ret_val = e1000_read_kmrn_reg_generic(hw, 4269 E1000_KMRNCTRLSTA_INBAND_PARAM, 4270 ®_data); 4271 if (ret_val) 4272 return ret_val; 4273 reg_data |= 0x3F; 4274 ret_val = e1000_write_kmrn_reg_generic(hw, 4275 E1000_KMRNCTRLSTA_INBAND_PARAM, 4276 reg_data); 4277 if (ret_val) 4278 return ret_val; 4279 4280 switch (hw->phy.type) { 4281 case e1000_phy_igp_3: 4282 ret_val = e1000_copper_link_setup_igp(hw); 4283 if (ret_val) 4284 return ret_val; 4285 break; 4286 case e1000_phy_bm: 4287 case e1000_phy_82578: 4288 ret_val = e1000_copper_link_setup_m88(hw); 4289 if (ret_val) 4290 return ret_val; 4291 break; 4292 case e1000_phy_82577: 4293 case e1000_phy_82579: 4294 ret_val = e1000_copper_link_setup_82577(hw); 4295 if (ret_val) 4296 return ret_val; 4297 break; 4298 case e1000_phy_ife: 4299 ret_val = hw->phy.ops.read_reg(hw, IFE_PHY_MDIX_CONTROL, 4300 ®_data); 4301 if (ret_val) 4302 return ret_val; 4303 4304 reg_data &= ~IFE_PMC_AUTO_MDIX; 4305 4306 switch (hw->phy.mdix) { 4307 case 1: 4308 reg_data &= ~IFE_PMC_FORCE_MDIX; 4309 break; 4310 case 2: 4311 reg_data |= IFE_PMC_FORCE_MDIX; 4312 break; 4313 case 0: 4314 default: 4315 reg_data |= IFE_PMC_AUTO_MDIX; 4316 break; 4317 } 4318 ret_val = hw->phy.ops.write_reg(hw, IFE_PHY_MDIX_CONTROL, 4319 reg_data); 4320 if (ret_val) 4321 return ret_val; 4322 break; 4323 default: 4324 break; 4325 } 4326 4327 return e1000_setup_copper_link_generic(hw); 4328 } 4329 4330 /** 4331 * e1000_setup_copper_link_pch_lpt - Configure MAC/PHY interface 4332 * @hw: pointer to the HW structure 4333 * 4334 * Calls the PHY specific link setup function and then calls the 4335 * generic setup_copper_link to finish configuring the link for 4336 * Lynxpoint PCH devices 4337 **/ 4338 static s32 e1000_setup_copper_link_pch_lpt(struct e1000_hw *hw) 4339 { 4340 u32 ctrl; 4341 s32 ret_val; 4342 4343 DEBUGFUNC("e1000_setup_copper_link_pch_lpt"); 4344 4345 ctrl = E1000_READ_REG(hw, E1000_CTRL); 4346 ctrl |= E1000_CTRL_SLU; 4347 ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); 4348 E1000_WRITE_REG(hw, E1000_CTRL, ctrl); 4349 4350 ret_val = e1000_copper_link_setup_82577(hw); 4351 if (ret_val) 4352 return ret_val; 4353 4354 return e1000_setup_copper_link_generic(hw); 4355 } 4356 4357 /** 4358 * e1000_get_link_up_info_ich8lan - Get current link speed and duplex 4359 * @hw: pointer to the HW structure 4360 * @speed: pointer to store current link speed 4361 * @duplex: pointer to store the current link duplex 4362 * 4363 * Calls the generic get_speed_and_duplex to retrieve the current link 4364 * information and then calls the Kumeran lock loss workaround for links at 4365 * gigabit speeds. 4366 **/ 4367 static s32 e1000_get_link_up_info_ich8lan(struct e1000_hw *hw, u16 *speed, 4368 u16 *duplex) 4369 { 4370 s32 ret_val; 4371 4372 DEBUGFUNC("e1000_get_link_up_info_ich8lan"); 4373 4374 ret_val = e1000_get_speed_and_duplex_copper_generic(hw, speed, duplex); 4375 if (ret_val) 4376 return ret_val; 4377 4378 if ((hw->mac.type == e1000_ich8lan) && 4379 (hw->phy.type == e1000_phy_igp_3) && 4380 (*speed == SPEED_1000)) { 4381 ret_val = e1000_kmrn_lock_loss_workaround_ich8lan(hw); 4382 } 4383 4384 return ret_val; 4385 } 4386 4387 /** 4388 * e1000_kmrn_lock_loss_workaround_ich8lan - Kumeran workaround 4389 * @hw: pointer to the HW structure 4390 * 4391 * Work-around for 82566 Kumeran PCS lock loss: 4392 * On link status change (i.e. PCI reset, speed change) and link is up and 4393 * speed is gigabit- 4394 * 0) if workaround is optionally disabled do nothing 4395 * 1) wait 1ms for Kumeran link to come up 4396 * 2) check Kumeran Diagnostic register PCS lock loss bit 4397 * 3) if not set the link is locked (all is good), otherwise... 4398 * 4) reset the PHY 4399 * 5) repeat up to 10 times 4400 * Note: this is only called for IGP3 copper when speed is 1gb. 4401 **/ 4402 static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw) 4403 { 4404 struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; 4405 u32 phy_ctrl; 4406 s32 ret_val; 4407 u16 i, data; 4408 bool link; 4409 4410 DEBUGFUNC("e1000_kmrn_lock_loss_workaround_ich8lan"); 4411 4412 if (!dev_spec->kmrn_lock_loss_workaround_enabled) 4413 return E1000_SUCCESS; 4414 4415 /* Make sure link is up before proceeding. If not just return. 4416 * Attempting this while link is negotiating fouled up link 4417 * stability 4418 */ 4419 ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link); 4420 if (!link) 4421 return E1000_SUCCESS; 4422 4423 for (i = 0; i < 10; i++) { 4424 /* read once to clear */ 4425 ret_val = hw->phy.ops.read_reg(hw, IGP3_KMRN_DIAG, &data); 4426 if (ret_val) 4427 return ret_val; 4428 /* and again to get new status */ 4429 ret_val = hw->phy.ops.read_reg(hw, IGP3_KMRN_DIAG, &data); 4430 if (ret_val) 4431 return ret_val; 4432 4433 /* check for PCS lock */ 4434 if (!(data & IGP3_KMRN_DIAG_PCS_LOCK_LOSS)) 4435 return E1000_SUCCESS; 4436 4437 /* Issue PHY reset */ 4438 hw->phy.ops.reset(hw); 4439 msec_delay_irq(5); 4440 } 4441 /* Disable GigE link negotiation */ 4442 phy_ctrl = E1000_READ_REG(hw, E1000_PHY_CTRL); 4443 phy_ctrl |= (E1000_PHY_CTRL_GBE_DISABLE | 4444 E1000_PHY_CTRL_NOND0A_GBE_DISABLE); 4445 E1000_WRITE_REG(hw, E1000_PHY_CTRL, phy_ctrl); 4446 4447 /* Call gig speed drop workaround on Gig disable before accessing 4448 * any PHY registers 4449 */ 4450 e1000_gig_downshift_workaround_ich8lan(hw); 4451 4452 /* unable to acquire PCS lock */ 4453 return -E1000_ERR_PHY; 4454 } 4455 4456 /** 4457 * e1000_set_kmrn_lock_loss_workaround_ich8lan - Set Kumeran workaround state 4458 * @hw: pointer to the HW structure 4459 * @state: boolean value used to set the current Kumeran workaround state 4460 * 4461 * If ICH8, set the current Kumeran workaround state (enabled - TRUE 4462 * /disabled - FALSE). 4463 **/ 4464 void e1000_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw, 4465 bool state) 4466 { 4467 struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; 4468 4469 DEBUGFUNC("e1000_set_kmrn_lock_loss_workaround_ich8lan"); 4470 4471 if (hw->mac.type != e1000_ich8lan) { 4472 DEBUGOUT("Workaround applies to ICH8 only.\n"); 4473 return; 4474 } 4475 4476 dev_spec->kmrn_lock_loss_workaround_enabled = state; 4477 4478 return; 4479 } 4480 4481 /** 4482 * e1000_ipg3_phy_powerdown_workaround_ich8lan - Power down workaround on D3 4483 * @hw: pointer to the HW structure 4484 * 4485 * Workaround for 82566 power-down on D3 entry: 4486 * 1) disable gigabit link 4487 * 2) write VR power-down enable 4488 * 3) read it back 4489 * Continue if successful, else issue LCD reset and repeat 4490 **/ 4491 void e1000_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw) 4492 { 4493 u32 reg; 4494 u16 data; 4495 u8 retry = 0; 4496 4497 DEBUGFUNC("e1000_igp3_phy_powerdown_workaround_ich8lan"); 4498 4499 if (hw->phy.type != e1000_phy_igp_3) 4500 return; 4501 4502 /* Try the workaround twice (if needed) */ 4503 do { 4504 /* Disable link */ 4505 reg = E1000_READ_REG(hw, E1000_PHY_CTRL); 4506 reg |= (E1000_PHY_CTRL_GBE_DISABLE | 4507 E1000_PHY_CTRL_NOND0A_GBE_DISABLE); 4508 E1000_WRITE_REG(hw, E1000_PHY_CTRL, reg); 4509 4510 /* Call gig speed drop workaround on Gig disable before 4511 * accessing any PHY registers 4512 */ 4513 if (hw->mac.type == e1000_ich8lan) 4514 e1000_gig_downshift_workaround_ich8lan(hw); 4515 4516 /* Write VR power-down enable */ 4517 hw->phy.ops.read_reg(hw, IGP3_VR_CTRL, &data); 4518 data &= ~IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK; 4519 hw->phy.ops.write_reg(hw, IGP3_VR_CTRL, 4520 data | IGP3_VR_CTRL_MODE_SHUTDOWN); 4521 4522 /* Read it back and test */ 4523 hw->phy.ops.read_reg(hw, IGP3_VR_CTRL, &data); 4524 data &= IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK; 4525 if ((data == IGP3_VR_CTRL_MODE_SHUTDOWN) || retry) 4526 break; 4527 4528 /* Issue PHY reset and repeat at most one more time */ 4529 reg = E1000_READ_REG(hw, E1000_CTRL); 4530 E1000_WRITE_REG(hw, E1000_CTRL, reg | E1000_CTRL_PHY_RST); 4531 retry++; 4532 } while (retry); 4533 } 4534 4535 /** 4536 * e1000_gig_downshift_workaround_ich8lan - WoL from S5 stops working 4537 * @hw: pointer to the HW structure 4538 * 4539 * Steps to take when dropping from 1Gb/s (eg. link cable removal (LSC), 4540 * LPLU, Gig disable, MDIC PHY reset): 4541 * 1) Set Kumeran Near-end loopback 4542 * 2) Clear Kumeran Near-end loopback 4543 * Should only be called for ICH8[m] devices with any 1G Phy. 4544 **/ 4545 void e1000_gig_downshift_workaround_ich8lan(struct e1000_hw *hw) 4546 { 4547 s32 ret_val; 4548 u16 reg_data; 4549 4550 DEBUGFUNC("e1000_gig_downshift_workaround_ich8lan"); 4551 4552 if ((hw->mac.type != e1000_ich8lan) || 4553 (hw->phy.type == e1000_phy_ife)) 4554 return; 4555 4556 ret_val = e1000_read_kmrn_reg_generic(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET, 4557 ®_data); 4558 if (ret_val) 4559 return; 4560 reg_data |= E1000_KMRNCTRLSTA_DIAG_NELPBK; 4561 ret_val = e1000_write_kmrn_reg_generic(hw, 4562 E1000_KMRNCTRLSTA_DIAG_OFFSET, 4563 reg_data); 4564 if (ret_val) 4565 return; 4566 reg_data &= ~E1000_KMRNCTRLSTA_DIAG_NELPBK; 4567 e1000_write_kmrn_reg_generic(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET, 4568 reg_data); 4569 } 4570 4571 /** 4572 * e1000_suspend_workarounds_ich8lan - workarounds needed during S0->Sx 4573 * @hw: pointer to the HW structure 4574 * 4575 * During S0 to Sx transition, it is possible the link remains at gig 4576 * instead of negotiating to a lower speed. Before going to Sx, set 4577 * 'Gig Disable' to force link speed negotiation to a lower speed based on 4578 * the LPLU setting in the NVM or custom setting. For PCH and newer parts, 4579 * the OEM bits PHY register (LED, GbE disable and LPLU configurations) also 4580 * needs to be written. 4581 * Parts that support (and are linked to a partner which support) EEE in 4582 * 100Mbps should disable LPLU since 100Mbps w/ EEE requires less power 4583 * than 10Mbps w/o EEE. 4584 **/ 4585 void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw) 4586 { 4587 struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; 4588 u32 phy_ctrl; 4589 s32 ret_val; 4590 4591 DEBUGFUNC("e1000_suspend_workarounds_ich8lan"); 4592 4593 phy_ctrl = E1000_READ_REG(hw, E1000_PHY_CTRL); 4594 phy_ctrl |= E1000_PHY_CTRL_GBE_DISABLE; 4595 4596 if (hw->phy.type == e1000_phy_i217) { 4597 u16 phy_reg, device_id = hw->device_id; 4598 4599 if ((device_id == E1000_DEV_ID_PCH_LPTLP_I218_LM) || 4600 (device_id == E1000_DEV_ID_PCH_LPTLP_I218_V)) { 4601 u32 fextnvm6 = E1000_READ_REG(hw, E1000_FEXTNVM6); 4602 4603 E1000_WRITE_REG(hw, E1000_FEXTNVM6, 4604 fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK); 4605 } 4606 4607 ret_val = hw->phy.ops.acquire(hw); 4608 if (ret_val) 4609 goto out; 4610 4611 if (!dev_spec->eee_disable) { 4612 u16 eee_advert; 4613 4614 ret_val = 4615 e1000_read_emi_reg_locked(hw, 4616 I217_EEE_ADVERTISEMENT, 4617 &eee_advert); 4618 if (ret_val) 4619 goto release; 4620 4621 /* Disable LPLU if both link partners support 100BaseT 4622 * EEE and 100Full is advertised on both ends of the 4623 * link, and enable Auto Enable LPI since there will 4624 * be no driver to enable LPI while in Sx. 4625 */ 4626 if ((eee_advert & I82579_EEE_100_SUPPORTED) && 4627 (dev_spec->eee_lp_ability & 4628 I82579_EEE_100_SUPPORTED) && 4629 (hw->phy.autoneg_advertised & ADVERTISE_100_FULL)) { 4630 phy_ctrl &= ~(E1000_PHY_CTRL_D0A_LPLU | 4631 E1000_PHY_CTRL_NOND0A_LPLU); 4632 4633 /* Set Auto Enable LPI after link up */ 4634 hw->phy.ops.read_reg_locked(hw, 4635 I217_LPI_GPIO_CTRL, 4636 &phy_reg); 4637 phy_reg |= I217_LPI_GPIO_CTRL_AUTO_EN_LPI; 4638 hw->phy.ops.write_reg_locked(hw, 4639 I217_LPI_GPIO_CTRL, 4640 phy_reg); 4641 } 4642 } 4643 4644 /* For i217 Intel Rapid Start Technology support, 4645 * when the system is going into Sx and no manageability engine 4646 * is present, the driver must configure proxy to reset only on 4647 * power good. LPI (Low Power Idle) state must also reset only 4648 * on power good, as well as the MTA (Multicast table array). 4649 * The SMBus release must also be disabled on LCD reset. 4650 */ 4651 if (!(E1000_READ_REG(hw, E1000_FWSM) & 4652 E1000_ICH_FWSM_FW_VALID)) { 4653 /* Enable proxy to reset only on power good. */ 4654 hw->phy.ops.read_reg_locked(hw, I217_PROXY_CTRL, 4655 &phy_reg); 4656 phy_reg |= I217_PROXY_CTRL_AUTO_DISABLE; 4657 hw->phy.ops.write_reg_locked(hw, I217_PROXY_CTRL, 4658 phy_reg); 4659 4660 /* Set bit enable LPI (EEE) to reset only on 4661 * power good. 4662 */ 4663 hw->phy.ops.read_reg_locked(hw, I217_SxCTRL, &phy_reg); 4664 phy_reg |= I217_SxCTRL_ENABLE_LPI_RESET; 4665 hw->phy.ops.write_reg_locked(hw, I217_SxCTRL, phy_reg); 4666 4667 /* Disable the SMB release on LCD reset. */ 4668 hw->phy.ops.read_reg_locked(hw, I217_MEMPWR, &phy_reg); 4669 phy_reg &= ~I217_MEMPWR_DISABLE_SMB_RELEASE; 4670 hw->phy.ops.write_reg_locked(hw, I217_MEMPWR, phy_reg); 4671 } 4672 4673 /* Enable MTA to reset for Intel Rapid Start Technology 4674 * Support 4675 */ 4676 hw->phy.ops.read_reg_locked(hw, I217_CGFREG, &phy_reg); 4677 phy_reg |= I217_CGFREG_ENABLE_MTA_RESET; 4678 hw->phy.ops.write_reg_locked(hw, I217_CGFREG, phy_reg); 4679 4680 release: 4681 hw->phy.ops.release(hw); 4682 } 4683 out: 4684 E1000_WRITE_REG(hw, E1000_PHY_CTRL, phy_ctrl); 4685 4686 if (hw->mac.type == e1000_ich8lan) 4687 e1000_gig_downshift_workaround_ich8lan(hw); 4688 4689 if (hw->mac.type >= e1000_pchlan) { 4690 e1000_oem_bits_config_ich8lan(hw, FALSE); 4691 4692 /* Reset PHY to activate OEM bits on 82577/8 */ 4693 if (hw->mac.type == e1000_pchlan) 4694 e1000_phy_hw_reset_generic(hw); 4695 4696 ret_val = hw->phy.ops.acquire(hw); 4697 if (ret_val) 4698 return; 4699 e1000_write_smbus_addr(hw); 4700 hw->phy.ops.release(hw); 4701 } 4702 4703 return; 4704 } 4705 4706 /** 4707 * e1000_resume_workarounds_pchlan - workarounds needed during Sx->S0 4708 * @hw: pointer to the HW structure 4709 * 4710 * During Sx to S0 transitions on non-managed devices or managed devices 4711 * on which PHY resets are not blocked, if the PHY registers cannot be 4712 * accessed properly by the s/w toggle the LANPHYPC value to power cycle 4713 * the PHY. 4714 * On i217, setup Intel Rapid Start Technology. 4715 **/ 4716 void e1000_resume_workarounds_pchlan(struct e1000_hw *hw) 4717 { 4718 s32 ret_val; 4719 4720 DEBUGFUNC("e1000_resume_workarounds_pchlan"); 4721 4722 if (hw->mac.type < e1000_pch2lan) 4723 return; 4724 4725 ret_val = e1000_init_phy_workarounds_pchlan(hw); 4726 if (ret_val) { 4727 DEBUGOUT1("Failed to init PHY flow ret_val=%d\n", ret_val); 4728 return; 4729 } 4730 4731 /* For i217 Intel Rapid Start Technology support when the system 4732 * is transitioning from Sx and no manageability engine is present 4733 * configure SMBus to restore on reset, disable proxy, and enable 4734 * the reset on MTA (Multicast table array). 4735 */ 4736 if (hw->phy.type == e1000_phy_i217) { 4737 u16 phy_reg; 4738 4739 ret_val = hw->phy.ops.acquire(hw); 4740 if (ret_val) { 4741 DEBUGOUT("Failed to setup iRST\n"); 4742 return; 4743 } 4744 4745 /* Clear Auto Enable LPI after link up */ 4746 hw->phy.ops.read_reg_locked(hw, I217_LPI_GPIO_CTRL, &phy_reg); 4747 phy_reg &= ~I217_LPI_GPIO_CTRL_AUTO_EN_LPI; 4748 hw->phy.ops.write_reg_locked(hw, I217_LPI_GPIO_CTRL, phy_reg); 4749 4750 if (!(E1000_READ_REG(hw, E1000_FWSM) & 4751 E1000_ICH_FWSM_FW_VALID)) { 4752 /* Restore clear on SMB if no manageability engine 4753 * is present 4754 */ 4755 ret_val = hw->phy.ops.read_reg_locked(hw, I217_MEMPWR, 4756 &phy_reg); 4757 if (ret_val) 4758 goto release; 4759 phy_reg |= I217_MEMPWR_DISABLE_SMB_RELEASE; 4760 hw->phy.ops.write_reg_locked(hw, I217_MEMPWR, phy_reg); 4761 4762 /* Disable Proxy */ 4763 hw->phy.ops.write_reg_locked(hw, I217_PROXY_CTRL, 0); 4764 } 4765 /* Enable reset on MTA */ 4766 ret_val = hw->phy.ops.read_reg_locked(hw, I217_CGFREG, 4767 &phy_reg); 4768 if (ret_val) 4769 goto release; 4770 phy_reg &= ~I217_CGFREG_ENABLE_MTA_RESET; 4771 hw->phy.ops.write_reg_locked(hw, I217_CGFREG, phy_reg); 4772 release: 4773 if (ret_val) 4774 DEBUGOUT1("Error %d in resume workarounds\n", ret_val); 4775 hw->phy.ops.release(hw); 4776 } 4777 } 4778 4779 /** 4780 * e1000_cleanup_led_ich8lan - Restore the default LED operation 4781 * @hw: pointer to the HW structure 4782 * 4783 * Return the LED back to the default configuration. 4784 **/ 4785 static s32 e1000_cleanup_led_ich8lan(struct e1000_hw *hw) 4786 { 4787 DEBUGFUNC("e1000_cleanup_led_ich8lan"); 4788 4789 if (hw->phy.type == e1000_phy_ife) 4790 return hw->phy.ops.write_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED, 4791 0); 4792 4793 E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_default); 4794 return E1000_SUCCESS; 4795 } 4796 4797 /** 4798 * e1000_led_on_ich8lan - Turn LEDs on 4799 * @hw: pointer to the HW structure 4800 * 4801 * Turn on the LEDs. 4802 **/ 4803 static s32 e1000_led_on_ich8lan(struct e1000_hw *hw) 4804 { 4805 DEBUGFUNC("e1000_led_on_ich8lan"); 4806 4807 if (hw->phy.type == e1000_phy_ife) 4808 return hw->phy.ops.write_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED, 4809 (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_ON)); 4810 4811 E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_mode2); 4812 return E1000_SUCCESS; 4813 } 4814 4815 /** 4816 * e1000_led_off_ich8lan - Turn LEDs off 4817 * @hw: pointer to the HW structure 4818 * 4819 * Turn off the LEDs. 4820 **/ 4821 static s32 e1000_led_off_ich8lan(struct e1000_hw *hw) 4822 { 4823 DEBUGFUNC("e1000_led_off_ich8lan"); 4824 4825 if (hw->phy.type == e1000_phy_ife) 4826 return hw->phy.ops.write_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED, 4827 (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_OFF)); 4828 4829 E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_mode1); 4830 return E1000_SUCCESS; 4831 } 4832 4833 /** 4834 * e1000_setup_led_pchlan - Configures SW controllable LED 4835 * @hw: pointer to the HW structure 4836 * 4837 * This prepares the SW controllable LED for use. 4838 **/ 4839 static s32 e1000_setup_led_pchlan(struct e1000_hw *hw) 4840 { 4841 DEBUGFUNC("e1000_setup_led_pchlan"); 4842 4843 return hw->phy.ops.write_reg(hw, HV_LED_CONFIG, 4844 (u16)hw->mac.ledctl_mode1); 4845 } 4846 4847 /** 4848 * e1000_cleanup_led_pchlan - Restore the default LED operation 4849 * @hw: pointer to the HW structure 4850 * 4851 * Return the LED back to the default configuration. 4852 **/ 4853 static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw) 4854 { 4855 DEBUGFUNC("e1000_cleanup_led_pchlan"); 4856 4857 return hw->phy.ops.write_reg(hw, HV_LED_CONFIG, 4858 (u16)hw->mac.ledctl_default); 4859 } 4860 4861 /** 4862 * e1000_led_on_pchlan - Turn LEDs on 4863 * @hw: pointer to the HW structure 4864 * 4865 * Turn on the LEDs. 4866 **/ 4867 static s32 e1000_led_on_pchlan(struct e1000_hw *hw) 4868 { 4869 u16 data = (u16)hw->mac.ledctl_mode2; 4870 u32 i, led; 4871 4872 DEBUGFUNC("e1000_led_on_pchlan"); 4873 4874 /* If no link, then turn LED on by setting the invert bit 4875 * for each LED that's mode is "link_up" in ledctl_mode2. 4876 */ 4877 if (!(E1000_READ_REG(hw, E1000_STATUS) & E1000_STATUS_LU)) { 4878 for (i = 0; i < 3; i++) { 4879 led = (data >> (i * 5)) & E1000_PHY_LED0_MASK; 4880 if ((led & E1000_PHY_LED0_MODE_MASK) != 4881 E1000_LEDCTL_MODE_LINK_UP) 4882 continue; 4883 if (led & E1000_PHY_LED0_IVRT) 4884 data &= ~(E1000_PHY_LED0_IVRT << (i * 5)); 4885 else 4886 data |= (E1000_PHY_LED0_IVRT << (i * 5)); 4887 } 4888 } 4889 4890 return hw->phy.ops.write_reg(hw, HV_LED_CONFIG, data); 4891 } 4892 4893 /** 4894 * e1000_led_off_pchlan - Turn LEDs off 4895 * @hw: pointer to the HW structure 4896 * 4897 * Turn off the LEDs. 4898 **/ 4899 static s32 e1000_led_off_pchlan(struct e1000_hw *hw) 4900 { 4901 u16 data = (u16)hw->mac.ledctl_mode1; 4902 u32 i, led; 4903 4904 DEBUGFUNC("e1000_led_off_pchlan"); 4905 4906 /* If no link, then turn LED off by clearing the invert bit 4907 * for each LED that's mode is "link_up" in ledctl_mode1. 4908 */ 4909 if (!(E1000_READ_REG(hw, E1000_STATUS) & E1000_STATUS_LU)) { 4910 for (i = 0; i < 3; i++) { 4911 led = (data >> (i * 5)) & E1000_PHY_LED0_MASK; 4912 if ((led & E1000_PHY_LED0_MODE_MASK) != 4913 E1000_LEDCTL_MODE_LINK_UP) 4914 continue; 4915 if (led & E1000_PHY_LED0_IVRT) 4916 data &= ~(E1000_PHY_LED0_IVRT << (i * 5)); 4917 else 4918 data |= (E1000_PHY_LED0_IVRT << (i * 5)); 4919 } 4920 } 4921 4922 return hw->phy.ops.write_reg(hw, HV_LED_CONFIG, data); 4923 } 4924 4925 /** 4926 * e1000_get_cfg_done_ich8lan - Read config done bit after Full or PHY reset 4927 * @hw: pointer to the HW structure 4928 * 4929 * Read appropriate register for the config done bit for completion status 4930 * and configure the PHY through s/w for EEPROM-less parts. 4931 * 4932 * NOTE: some silicon which is EEPROM-less will fail trying to read the 4933 * config done bit, so only an error is logged and continues. If we were 4934 * to return with error, EEPROM-less silicon would not be able to be reset 4935 * or change link. 4936 **/ 4937 static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw) 4938 { 4939 s32 ret_val = E1000_SUCCESS; 4940 u32 bank = 0; 4941 u32 status; 4942 4943 DEBUGFUNC("e1000_get_cfg_done_ich8lan"); 4944 4945 e1000_get_cfg_done_generic(hw); 4946 4947 /* Wait for indication from h/w that it has completed basic config */ 4948 if (hw->mac.type >= e1000_ich10lan) { 4949 e1000_lan_init_done_ich8lan(hw); 4950 } else { 4951 ret_val = e1000_get_auto_rd_done_generic(hw); 4952 if (ret_val) { 4953 /* When auto config read does not complete, do not 4954 * return with an error. This can happen in situations 4955 * where there is no eeprom and prevents getting link. 4956 */ 4957 DEBUGOUT("Auto Read Done did not complete\n"); 4958 ret_val = E1000_SUCCESS; 4959 } 4960 } 4961 4962 /* Clear PHY Reset Asserted bit */ 4963 status = E1000_READ_REG(hw, E1000_STATUS); 4964 if (status & E1000_STATUS_PHYRA) 4965 E1000_WRITE_REG(hw, E1000_STATUS, status & ~E1000_STATUS_PHYRA); 4966 else 4967 DEBUGOUT("PHY Reset Asserted not set - needs delay\n"); 4968 4969 /* If EEPROM is not marked present, init the IGP 3 PHY manually */ 4970 if (hw->mac.type <= e1000_ich9lan) { 4971 if (!(E1000_READ_REG(hw, E1000_EECD) & E1000_EECD_PRES) && 4972 (hw->phy.type == e1000_phy_igp_3)) { 4973 e1000_phy_init_script_igp3(hw); 4974 } 4975 } else { 4976 if (e1000_valid_nvm_bank_detect_ich8lan(hw, &bank)) { 4977 /* Maybe we should do a basic PHY config */ 4978 DEBUGOUT("EEPROM not present\n"); 4979 ret_val = -E1000_ERR_CONFIG; 4980 } 4981 } 4982 4983 return ret_val; 4984 } 4985 4986 /** 4987 * e1000_power_down_phy_copper_ich8lan - Remove link during PHY power down 4988 * @hw: pointer to the HW structure 4989 * 4990 * In the case of a PHY power down to save power, or to turn off link during a 4991 * driver unload, or wake on lan is not enabled, remove the link. 4992 **/ 4993 static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw) 4994 { 4995 /* If the management interface is not enabled, then power down */ 4996 if (!(hw->mac.ops.check_mng_mode(hw) || 4997 hw->phy.ops.check_reset_block(hw))) 4998 e1000_power_down_phy_copper(hw); 4999 5000 return; 5001 } 5002 5003 /** 5004 * e1000_clear_hw_cntrs_ich8lan - Clear statistical counters 5005 * @hw: pointer to the HW structure 5006 * 5007 * Clears hardware counters specific to the silicon family and calls 5008 * clear_hw_cntrs_generic to clear all general purpose counters. 5009 **/ 5010 static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw) 5011 { 5012 u16 phy_data; 5013 s32 ret_val; 5014 5015 DEBUGFUNC("e1000_clear_hw_cntrs_ich8lan"); 5016 5017 e1000_clear_hw_cntrs_base_generic(hw); 5018 5019 E1000_READ_REG(hw, E1000_ALGNERRC); 5020 E1000_READ_REG(hw, E1000_RXERRC); 5021 E1000_READ_REG(hw, E1000_TNCRS); 5022 E1000_READ_REG(hw, E1000_CEXTERR); 5023 E1000_READ_REG(hw, E1000_TSCTC); 5024 E1000_READ_REG(hw, E1000_TSCTFC); 5025 5026 E1000_READ_REG(hw, E1000_MGTPRC); 5027 E1000_READ_REG(hw, E1000_MGTPDC); 5028 E1000_READ_REG(hw, E1000_MGTPTC); 5029 5030 E1000_READ_REG(hw, E1000_IAC); 5031 E1000_READ_REG(hw, E1000_ICRXOC); 5032 5033 /* Clear PHY statistics registers */ 5034 if ((hw->phy.type == e1000_phy_82578) || 5035 (hw->phy.type == e1000_phy_82579) || 5036 (hw->phy.type == e1000_phy_i217) || 5037 (hw->phy.type == e1000_phy_82577)) { 5038 ret_val = hw->phy.ops.acquire(hw); 5039 if (ret_val) 5040 return; 5041 ret_val = hw->phy.ops.set_page(hw, 5042 HV_STATS_PAGE << IGP_PAGE_SHIFT); 5043 if (ret_val) 5044 goto release; 5045 hw->phy.ops.read_reg_page(hw, HV_SCC_UPPER, &phy_data); 5046 hw->phy.ops.read_reg_page(hw, HV_SCC_LOWER, &phy_data); 5047 hw->phy.ops.read_reg_page(hw, HV_ECOL_UPPER, &phy_data); 5048 hw->phy.ops.read_reg_page(hw, HV_ECOL_LOWER, &phy_data); 5049 hw->phy.ops.read_reg_page(hw, HV_MCC_UPPER, &phy_data); 5050 hw->phy.ops.read_reg_page(hw, HV_MCC_LOWER, &phy_data); 5051 hw->phy.ops.read_reg_page(hw, HV_LATECOL_UPPER, &phy_data); 5052 hw->phy.ops.read_reg_page(hw, HV_LATECOL_LOWER, &phy_data); 5053 hw->phy.ops.read_reg_page(hw, HV_COLC_UPPER, &phy_data); 5054 hw->phy.ops.read_reg_page(hw, HV_COLC_LOWER, &phy_data); 5055 hw->phy.ops.read_reg_page(hw, HV_DC_UPPER, &phy_data); 5056 hw->phy.ops.read_reg_page(hw, HV_DC_LOWER, &phy_data); 5057 hw->phy.ops.read_reg_page(hw, HV_TNCRS_UPPER, &phy_data); 5058 hw->phy.ops.read_reg_page(hw, HV_TNCRS_LOWER, &phy_data); 5059 release: 5060 hw->phy.ops.release(hw); 5061 } 5062 } 5063 5064