1 /*- 2 * Copyright (c) 1997, 1998, 1999 3 * Bill Paul <wpaul@ee.columbia.edu>. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed by Bill Paul. 16 * 4. Neither the name of the author nor the names of any co-contributors 17 * may be used to endorse or promote products derived from this software 18 * without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 30 * THE POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33 #include <sys/cdefs.h> 34 __FBSDID("$FreeBSD$"); 35 36 /* 37 * Pseudo-driver for internal NWAY support on DEC 21143 and workalike 38 * controllers. Technically we're abusing the miibus code to handle 39 * media selection and NWAY support here since there is no MII 40 * interface. However the logical operations are roughly the same, 41 * and the alternative is to create a fake MII interface in the driver, 42 * which is harder to do. 43 */ 44 45 #include <sys/param.h> 46 #include <sys/systm.h> 47 #include <sys/kernel.h> 48 #include <sys/socket.h> 49 #include <sys/errno.h> 50 #include <sys/lock.h> 51 #include <sys/module.h> 52 #include <sys/mutex.h> 53 #include <sys/bus.h> 54 55 #include <net/if.h> 56 #include <net/if_arp.h> 57 #include <net/if_media.h> 58 59 #include <dev/mii/mii.h> 60 #include <dev/mii/miivar.h> 61 #include "miidevs.h" 62 63 #include <machine/bus.h> 64 #include <machine/resource.h> 65 66 #include <dev/pci/pcivar.h> 67 68 #include <dev/dc/if_dcreg.h> 69 70 #include "miibus_if.h" 71 72 #define DC_SETBIT(sc, reg, x) \ 73 CSR_WRITE_4(sc, reg, \ 74 CSR_READ_4(sc, reg) | x) 75 76 #define DC_CLRBIT(sc, reg, x) \ 77 CSR_WRITE_4(sc, reg, \ 78 CSR_READ_4(sc, reg) & ~x) 79 80 #define MIIF_AUTOTIMEOUT 0x0004 81 82 /* 83 * This is the subsystem ID for the built-in 21143 ethernet 84 * in several Compaq Presario systems. Apparently these are 85 * 10Mbps only, so we need to treat them specially. 86 */ 87 #define COMPAQ_PRESARIO_ID 0xb0bb0e11 88 89 static int dcphy_probe(device_t); 90 static int dcphy_attach(device_t); 91 92 static device_method_t dcphy_methods[] = { 93 /* device interface */ 94 DEVMETHOD(device_probe, dcphy_probe), 95 DEVMETHOD(device_attach, dcphy_attach), 96 DEVMETHOD(device_detach, mii_phy_detach), 97 DEVMETHOD(device_shutdown, bus_generic_shutdown), 98 { 0, 0 } 99 }; 100 101 static devclass_t dcphy_devclass; 102 103 static driver_t dcphy_driver = { 104 "dcphy", 105 dcphy_methods, 106 sizeof(struct mii_softc) 107 }; 108 109 DRIVER_MODULE(dcphy, miibus, dcphy_driver, dcphy_devclass, 0, 0); 110 111 static int dcphy_service(struct mii_softc *, struct mii_data *, int); 112 static void dcphy_status(struct mii_softc *); 113 static void dcphy_reset(struct mii_softc *); 114 static int dcphy_auto(struct mii_softc *); 115 116 static const struct mii_phy_funcs dcphy_funcs = { 117 dcphy_service, 118 dcphy_status, 119 dcphy_reset 120 }; 121 122 static int 123 dcphy_probe(device_t dev) 124 { 125 struct mii_attach_args *ma; 126 127 ma = device_get_ivars(dev); 128 129 /* 130 * The dc driver will report the 21143 vendor and device 131 * ID to let us know that it wants us to attach. 132 */ 133 if (ma->mii_id1 != DC_VENDORID_DEC || 134 ma->mii_id2 != DC_DEVICEID_21143) 135 return (ENXIO); 136 137 device_set_desc(dev, "Intel 21143 NWAY media interface"); 138 139 return (BUS_PROBE_DEFAULT); 140 } 141 142 static int 143 dcphy_attach(device_t dev) 144 { 145 struct mii_softc *sc; 146 struct dc_softc *dc_sc; 147 device_t brdev; 148 149 sc = device_get_softc(dev); 150 151 mii_phy_dev_attach(dev, MIIF_NOISOLATE | MIIF_NOMANPAUSE, 152 &dcphy_funcs, 0); 153 154 /*PHY_RESET(sc);*/ 155 dc_sc = sc->mii_pdata->mii_ifp->if_softc; 156 CSR_WRITE_4(dc_sc, DC_10BTSTAT, 0); 157 CSR_WRITE_4(dc_sc, DC_10BTCTRL, 0); 158 159 brdev = device_get_parent(sc->mii_dev); 160 switch (pci_get_subdevice(brdev) << 16 | pci_get_subvendor(brdev)) { 161 case COMPAQ_PRESARIO_ID: 162 /* Example of how to only allow 10Mbps modes. */ 163 sc->mii_capabilities = BMSR_ANEG | BMSR_10TFDX | BMSR_10THDX; 164 break; 165 default: 166 if (dc_sc->dc_pmode == DC_PMODE_SIA) 167 sc->mii_capabilities = 168 BMSR_ANEG | BMSR_10TFDX | BMSR_10THDX; 169 else 170 sc->mii_capabilities = 171 BMSR_ANEG | BMSR_100TXFDX | BMSR_100TXHDX | 172 BMSR_10TFDX | BMSR_10THDX; 173 break; 174 } 175 176 sc->mii_capabilities &= sc->mii_capmask; 177 device_printf(dev, " "); 178 mii_phy_add_media(sc); 179 printf("\n"); 180 181 MIIBUS_MEDIAINIT(sc->mii_dev); 182 return (0); 183 } 184 185 static int 186 dcphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd) 187 { 188 struct dc_softc *dc_sc; 189 struct ifmedia_entry *ife = mii->mii_media.ifm_cur; 190 int reg; 191 u_int32_t mode; 192 193 dc_sc = mii->mii_ifp->if_softc; 194 195 switch (cmd) { 196 case MII_POLLSTAT: 197 break; 198 199 case MII_MEDIACHG: 200 /* 201 * If the interface is not up, don't do anything. 202 */ 203 if ((mii->mii_ifp->if_flags & IFF_UP) == 0) 204 break; 205 206 mii->mii_media_active = IFM_NONE; 207 mode = CSR_READ_4(dc_sc, DC_NETCFG); 208 mode &= ~(DC_NETCFG_FULLDUPLEX | DC_NETCFG_PORTSEL | 209 DC_NETCFG_PCS | DC_NETCFG_SCRAMBLER | DC_NETCFG_SPEEDSEL); 210 211 switch (IFM_SUBTYPE(ife->ifm_media)) { 212 case IFM_AUTO: 213 /*PHY_RESET(sc);*/ 214 (void)dcphy_auto(sc); 215 break; 216 case IFM_100_TX: 217 PHY_RESET(sc); 218 DC_CLRBIT(dc_sc, DC_10BTCTRL, DC_TCTL_AUTONEGENBL); 219 mode |= DC_NETCFG_PORTSEL | DC_NETCFG_PCS | 220 DC_NETCFG_SCRAMBLER; 221 if ((ife->ifm_media & IFM_FDX) != 0) 222 mode |= DC_NETCFG_FULLDUPLEX; 223 else 224 mode &= ~DC_NETCFG_FULLDUPLEX; 225 CSR_WRITE_4(dc_sc, DC_NETCFG, mode); 226 break; 227 case IFM_10_T: 228 DC_CLRBIT(dc_sc, DC_SIARESET, DC_SIA_RESET); 229 DC_CLRBIT(dc_sc, DC_10BTCTRL, 0xFFFF); 230 if ((ife->ifm_media & IFM_FDX) != 0) 231 DC_SETBIT(dc_sc, DC_10BTCTRL, 0x7F3D); 232 else 233 DC_SETBIT(dc_sc, DC_10BTCTRL, 0x7F3F); 234 DC_SETBIT(dc_sc, DC_SIARESET, DC_SIA_RESET); 235 DC_CLRBIT(dc_sc, DC_10BTCTRL, DC_TCTL_AUTONEGENBL); 236 mode &= ~DC_NETCFG_PORTSEL; 237 mode |= DC_NETCFG_SPEEDSEL; 238 if ((ife->ifm_media & IFM_FDX) != 0) 239 mode |= DC_NETCFG_FULLDUPLEX; 240 else 241 mode &= ~DC_NETCFG_FULLDUPLEX; 242 CSR_WRITE_4(dc_sc, DC_NETCFG, mode); 243 break; 244 default: 245 return (EINVAL); 246 } 247 break; 248 249 case MII_TICK: 250 /* 251 * Is the interface even up? 252 */ 253 if ((mii->mii_ifp->if_flags & IFF_UP) == 0) 254 return (0); 255 256 /* 257 * Only used for autonegotiation. 258 */ 259 if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) 260 break; 261 262 reg = CSR_READ_4(dc_sc, DC_10BTSTAT); 263 if (!(reg & DC_TSTAT_LS10) || !(reg & DC_TSTAT_LS100)) 264 break; 265 266 /* 267 * Only retry autonegotiation every 5 seconds. 268 * 269 * Otherwise, fall through to calling dcphy_status() 270 * since real Intel 21143 chips don't show valid link 271 * status until autonegotiation is switched off, and 272 * that only happens in dcphy_status(). Without this, 273 * successful autonegotiation is never recognised on 274 * these chips. 275 */ 276 if (++sc->mii_ticks <= 50) 277 break; 278 279 sc->mii_ticks = 0; 280 dcphy_auto(sc); 281 282 break; 283 } 284 285 /* Update the media status. */ 286 PHY_STATUS(sc); 287 288 /* Callback if something changed. */ 289 mii_phy_update(sc, cmd); 290 return (0); 291 } 292 293 static void 294 dcphy_status(struct mii_softc *sc) 295 { 296 struct mii_data *mii = sc->mii_pdata; 297 int reg, anlpar, tstat = 0; 298 struct dc_softc *dc_sc; 299 300 dc_sc = mii->mii_ifp->if_softc; 301 302 mii->mii_media_status = IFM_AVALID; 303 mii->mii_media_active = IFM_ETHER; 304 305 if ((mii->mii_ifp->if_flags & IFF_UP) == 0) 306 return; 307 308 reg = CSR_READ_4(dc_sc, DC_10BTSTAT); 309 if (!(reg & DC_TSTAT_LS10) || !(reg & DC_TSTAT_LS100)) 310 mii->mii_media_status |= IFM_ACTIVE; 311 312 if (CSR_READ_4(dc_sc, DC_10BTCTRL) & DC_TCTL_AUTONEGENBL) { 313 /* Erg, still trying, I guess... */ 314 tstat = CSR_READ_4(dc_sc, DC_10BTSTAT); 315 if ((tstat & DC_TSTAT_ANEGSTAT) != DC_ASTAT_AUTONEGCMP) { 316 if ((DC_IS_MACRONIX(dc_sc) || DC_IS_PNICII(dc_sc)) && 317 (tstat & DC_TSTAT_ANEGSTAT) == DC_ASTAT_DISABLE) 318 goto skip; 319 mii->mii_media_active |= IFM_NONE; 320 return; 321 } 322 323 if (tstat & DC_TSTAT_LP_CAN_NWAY) { 324 anlpar = tstat >> 16; 325 if (anlpar & ANLPAR_TX_FD && 326 sc->mii_capabilities & BMSR_100TXFDX) 327 mii->mii_media_active |= IFM_100_TX | IFM_FDX; 328 else if (anlpar & ANLPAR_T4 && 329 sc->mii_capabilities & BMSR_100T4) 330 mii->mii_media_active |= IFM_100_T4 | IFM_HDX; 331 else if (anlpar & ANLPAR_TX && 332 sc->mii_capabilities & BMSR_100TXHDX) 333 mii->mii_media_active |= IFM_100_TX | IFM_HDX; 334 else if (anlpar & ANLPAR_10_FD) 335 mii->mii_media_active |= IFM_10_T | IFM_FDX; 336 else if (anlpar & ANLPAR_10) 337 mii->mii_media_active |= IFM_10_T | IFM_HDX; 338 else 339 mii->mii_media_active |= IFM_NONE; 340 if (DC_IS_INTEL(dc_sc)) 341 DC_CLRBIT(dc_sc, DC_10BTCTRL, 342 DC_TCTL_AUTONEGENBL); 343 return; 344 } 345 346 /* 347 * If the other side doesn't support NWAY, then the 348 * best we can do is determine if we have a 10Mbps or 349 * 100Mbps link. There's no way to know if the link 350 * is full or half duplex, so we default to half duplex 351 * and hope that the user is clever enough to manually 352 * change the media settings if we're wrong. 353 */ 354 if (!(reg & DC_TSTAT_LS100)) 355 mii->mii_media_active |= IFM_100_TX | IFM_HDX; 356 else if (!(reg & DC_TSTAT_LS10)) 357 mii->mii_media_active |= IFM_10_T | IFM_HDX; 358 else 359 mii->mii_media_active |= IFM_NONE; 360 if (DC_IS_INTEL(dc_sc)) 361 DC_CLRBIT(dc_sc, DC_10BTCTRL, DC_TCTL_AUTONEGENBL); 362 return; 363 } 364 365 skip: 366 if (CSR_READ_4(dc_sc, DC_NETCFG) & DC_NETCFG_SPEEDSEL) 367 mii->mii_media_active |= IFM_10_T; 368 else 369 mii->mii_media_active |= IFM_100_TX; 370 if (CSR_READ_4(dc_sc, DC_NETCFG) & DC_NETCFG_FULLDUPLEX) 371 mii->mii_media_active |= IFM_FDX; 372 else 373 mii->mii_media_active |= IFM_HDX; 374 } 375 376 static int 377 dcphy_auto(struct mii_softc *mii) 378 { 379 struct dc_softc *sc; 380 381 sc = mii->mii_pdata->mii_ifp->if_softc; 382 383 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_PORTSEL); 384 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_FULLDUPLEX); 385 DC_CLRBIT(sc, DC_SIARESET, DC_SIA_RESET); 386 if (mii->mii_capabilities & BMSR_100TXHDX) 387 CSR_WRITE_4(sc, DC_10BTCTRL, 0x3FFFF); 388 else 389 CSR_WRITE_4(sc, DC_10BTCTRL, 0xFFFF); 390 DC_SETBIT(sc, DC_SIARESET, DC_SIA_RESET); 391 DC_SETBIT(sc, DC_10BTCTRL, DC_TCTL_AUTONEGENBL); 392 DC_SETBIT(sc, DC_10BTSTAT, DC_ASTAT_TXDISABLE); 393 394 return (EJUSTRETURN); 395 } 396 397 static void 398 dcphy_reset(struct mii_softc *mii) 399 { 400 struct dc_softc *sc; 401 402 sc = mii->mii_pdata->mii_ifp->if_softc; 403 404 DC_CLRBIT(sc, DC_SIARESET, DC_SIA_RESET); 405 DELAY(1000); 406 DC_SETBIT(sc, DC_SIARESET, DC_SIA_RESET); 407 } 408