1 /*- 2 * SPDX-License-Identifier: BSD-4-Clause 3 * 4 * Copyright (c) 1997, 1998, 1999 5 * Bill Paul <wpaul@ee.columbia.edu>. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. All advertising materials mentioning features or use of this software 16 * must display the following acknowledgement: 17 * This product includes software developed by Bill Paul. 18 * 4. Neither the name of the author nor the names of any co-contributors 19 * may be used to endorse or promote products derived from this software 20 * without specific prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 25 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 26 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 29 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 30 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 31 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 32 * THE POSSIBILITY OF SUCH DAMAGE. 33 */ 34 35 #include <sys/cdefs.h> 36 __FBSDID("$FreeBSD$"); 37 38 /* 39 * Pseudo-driver for internal NWAY support on DEC 21143 and workalike 40 * controllers. Technically we're abusing the miibus code to handle 41 * media selection and NWAY support here since there is no MII 42 * interface. However the logical operations are roughly the same, 43 * and the alternative is to create a fake MII interface in the driver, 44 * which is harder to do. 45 */ 46 47 #include <sys/param.h> 48 #include <sys/systm.h> 49 #include <sys/kernel.h> 50 #include <sys/socket.h> 51 #include <sys/errno.h> 52 #include <sys/lock.h> 53 #include <sys/module.h> 54 #include <sys/mutex.h> 55 #include <sys/bus.h> 56 57 #include <net/if.h> 58 #include <net/if_var.h> 59 #include <net/if_arp.h> 60 #include <net/if_media.h> 61 62 #include <dev/mii/mii.h> 63 #include <dev/mii/miivar.h> 64 #include "miidevs.h" 65 66 #include <machine/bus.h> 67 #include <machine/resource.h> 68 69 #include <dev/pci/pcivar.h> 70 71 #include <dev/dc/if_dcreg.h> 72 73 #include "miibus_if.h" 74 75 #define DC_SETBIT(sc, reg, x) \ 76 CSR_WRITE_4(sc, reg, \ 77 CSR_READ_4(sc, reg) | x) 78 79 #define DC_CLRBIT(sc, reg, x) \ 80 CSR_WRITE_4(sc, reg, \ 81 CSR_READ_4(sc, reg) & ~x) 82 83 #define MIIF_AUTOTIMEOUT 0x0004 84 85 /* 86 * This is the subsystem ID for the built-in 21143 ethernet 87 * in several Compaq Presario systems. Apparently these are 88 * 10Mbps only, so we need to treat them specially. 89 */ 90 #define COMPAQ_PRESARIO_ID 0xb0bb0e11 91 92 static int dcphy_probe(device_t); 93 static int dcphy_attach(device_t); 94 95 static device_method_t dcphy_methods[] = { 96 /* device interface */ 97 DEVMETHOD(device_probe, dcphy_probe), 98 DEVMETHOD(device_attach, dcphy_attach), 99 DEVMETHOD(device_detach, mii_phy_detach), 100 DEVMETHOD(device_shutdown, bus_generic_shutdown), 101 DEVMETHOD_END 102 }; 103 104 static driver_t dcphy_driver = { 105 "dcphy", 106 dcphy_methods, 107 sizeof(struct mii_softc) 108 }; 109 110 DRIVER_MODULE(dcphy, miibus, dcphy_driver, 0, 0); 111 112 static int dcphy_service(struct mii_softc *, struct mii_data *, int); 113 static void dcphy_status(struct mii_softc *); 114 static void dcphy_reset(struct mii_softc *); 115 static int dcphy_auto(struct mii_softc *); 116 117 static const struct mii_phy_funcs dcphy_funcs = { 118 dcphy_service, 119 dcphy_status, 120 dcphy_reset 121 }; 122 123 static int 124 dcphy_probe(device_t dev) 125 { 126 struct mii_attach_args *ma; 127 128 ma = device_get_ivars(dev); 129 130 /* 131 * The dc driver will report the 21143 vendor and device 132 * ID to let us know that it wants us to attach. 133 */ 134 if (ma->mii_id1 != DC_VENDORID_DEC || 135 ma->mii_id2 != DC_DEVICEID_21143) 136 return (ENXIO); 137 138 device_set_desc(dev, "Intel 21143 NWAY media interface"); 139 140 return (BUS_PROBE_DEFAULT); 141 } 142 143 static int 144 dcphy_attach(device_t dev) 145 { 146 struct mii_softc *sc; 147 struct dc_softc *dc_sc; 148 device_t brdev; 149 150 sc = device_get_softc(dev); 151 152 mii_phy_dev_attach(dev, MIIF_NOISOLATE | MIIF_NOMANPAUSE, 153 &dcphy_funcs, 0); 154 155 /*PHY_RESET(sc);*/ 156 dc_sc = if_getsoftc(sc->mii_pdata->mii_ifp); 157 CSR_WRITE_4(dc_sc, DC_10BTSTAT, 0); 158 CSR_WRITE_4(dc_sc, DC_10BTCTRL, 0); 159 160 brdev = device_get_parent(sc->mii_dev); 161 switch (pci_get_subdevice(brdev) << 16 | pci_get_subvendor(brdev)) { 162 case COMPAQ_PRESARIO_ID: 163 /* Example of how to only allow 10Mbps modes. */ 164 sc->mii_capabilities = BMSR_ANEG | BMSR_10TFDX | BMSR_10THDX; 165 break; 166 default: 167 if (dc_sc->dc_pmode == DC_PMODE_SIA) 168 sc->mii_capabilities = 169 BMSR_ANEG | BMSR_10TFDX | BMSR_10THDX; 170 else 171 sc->mii_capabilities = 172 BMSR_ANEG | BMSR_100TXFDX | BMSR_100TXHDX | 173 BMSR_10TFDX | BMSR_10THDX; 174 break; 175 } 176 177 sc->mii_capabilities &= sc->mii_capmask; 178 device_printf(dev, " "); 179 mii_phy_add_media(sc); 180 printf("\n"); 181 182 MIIBUS_MEDIAINIT(sc->mii_dev); 183 return (0); 184 } 185 186 static int 187 dcphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd) 188 { 189 struct dc_softc *dc_sc; 190 struct ifmedia_entry *ife = mii->mii_media.ifm_cur; 191 int reg; 192 u_int32_t mode; 193 194 dc_sc = if_getsoftc(mii->mii_ifp); 195 196 switch (cmd) { 197 case MII_POLLSTAT: 198 break; 199 200 case MII_MEDIACHG: 201 /* 202 * If the interface is not up, don't do anything. 203 */ 204 if ((if_getflags(mii->mii_ifp) & IFF_UP) == 0) 205 break; 206 207 mii->mii_media_active = IFM_NONE; 208 mode = CSR_READ_4(dc_sc, DC_NETCFG); 209 mode &= ~(DC_NETCFG_FULLDUPLEX | DC_NETCFG_PORTSEL | 210 DC_NETCFG_PCS | DC_NETCFG_SCRAMBLER | DC_NETCFG_SPEEDSEL); 211 212 switch (IFM_SUBTYPE(ife->ifm_media)) { 213 case IFM_AUTO: 214 /*PHY_RESET(sc);*/ 215 (void)dcphy_auto(sc); 216 break; 217 case IFM_100_TX: 218 PHY_RESET(sc); 219 DC_CLRBIT(dc_sc, DC_10BTCTRL, DC_TCTL_AUTONEGENBL); 220 mode |= DC_NETCFG_PORTSEL | DC_NETCFG_PCS | 221 DC_NETCFG_SCRAMBLER; 222 if ((ife->ifm_media & IFM_FDX) != 0) 223 mode |= DC_NETCFG_FULLDUPLEX; 224 else 225 mode &= ~DC_NETCFG_FULLDUPLEX; 226 CSR_WRITE_4(dc_sc, DC_NETCFG, mode); 227 break; 228 case IFM_10_T: 229 DC_CLRBIT(dc_sc, DC_SIARESET, DC_SIA_RESET); 230 DC_CLRBIT(dc_sc, DC_10BTCTRL, 0xFFFF); 231 if ((ife->ifm_media & IFM_FDX) != 0) 232 DC_SETBIT(dc_sc, DC_10BTCTRL, 0x7F3D); 233 else 234 DC_SETBIT(dc_sc, DC_10BTCTRL, 0x7F3F); 235 DC_SETBIT(dc_sc, DC_SIARESET, DC_SIA_RESET); 236 DC_CLRBIT(dc_sc, DC_10BTCTRL, DC_TCTL_AUTONEGENBL); 237 mode &= ~DC_NETCFG_PORTSEL; 238 mode |= DC_NETCFG_SPEEDSEL; 239 if ((ife->ifm_media & IFM_FDX) != 0) 240 mode |= DC_NETCFG_FULLDUPLEX; 241 else 242 mode &= ~DC_NETCFG_FULLDUPLEX; 243 CSR_WRITE_4(dc_sc, DC_NETCFG, mode); 244 break; 245 default: 246 return (EINVAL); 247 } 248 break; 249 250 case MII_TICK: 251 /* 252 * Is the interface even up? 253 */ 254 if ((if_getflags(mii->mii_ifp) & IFF_UP) == 0) 255 return (0); 256 257 /* 258 * Only used for autonegotiation. 259 */ 260 if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) 261 break; 262 263 reg = CSR_READ_4(dc_sc, DC_10BTSTAT); 264 if (!(reg & DC_TSTAT_LS10) || !(reg & DC_TSTAT_LS100)) 265 break; 266 267 /* 268 * Only retry autonegotiation every 5 seconds. 269 * 270 * Otherwise, fall through to calling dcphy_status() 271 * since real Intel 21143 chips don't show valid link 272 * status until autonegotiation is switched off, and 273 * that only happens in dcphy_status(). Without this, 274 * successful autonegotiation is never recognised on 275 * these chips. 276 */ 277 if (++sc->mii_ticks <= 50) 278 break; 279 280 sc->mii_ticks = 0; 281 dcphy_auto(sc); 282 283 break; 284 } 285 286 /* Update the media status. */ 287 PHY_STATUS(sc); 288 289 /* Callback if something changed. */ 290 mii_phy_update(sc, cmd); 291 return (0); 292 } 293 294 static void 295 dcphy_status(struct mii_softc *sc) 296 { 297 struct mii_data *mii = sc->mii_pdata; 298 int anlpar, tstat; 299 struct dc_softc *dc_sc; 300 301 dc_sc = if_getsoftc(mii->mii_ifp); 302 303 mii->mii_media_status = IFM_AVALID; 304 mii->mii_media_active = IFM_ETHER; 305 306 if ((if_getflags(mii->mii_ifp) & IFF_UP) == 0) 307 return; 308 309 tstat = CSR_READ_4(dc_sc, DC_10BTSTAT); 310 if (!(tstat & DC_TSTAT_LS10) || !(tstat & DC_TSTAT_LS100)) 311 mii->mii_media_status |= IFM_ACTIVE; 312 313 if (CSR_READ_4(dc_sc, DC_10BTCTRL) & DC_TCTL_AUTONEGENBL) { 314 /* Erg, still trying, I guess... */ 315 if ((tstat & DC_TSTAT_ANEGSTAT) != DC_ASTAT_AUTONEGCMP) { 316 if ((DC_IS_MACRONIX(dc_sc) || DC_IS_PNICII(dc_sc)) && 317 (tstat & DC_TSTAT_ANEGSTAT) == DC_ASTAT_DISABLE) 318 goto skip; 319 mii->mii_media_active |= IFM_NONE; 320 return; 321 } 322 323 if (tstat & DC_TSTAT_LP_CAN_NWAY) { 324 anlpar = tstat >> 16; 325 if (anlpar & ANLPAR_TX_FD && 326 sc->mii_capabilities & BMSR_100TXFDX) 327 mii->mii_media_active |= IFM_100_TX | IFM_FDX; 328 else if (anlpar & ANLPAR_T4 && 329 sc->mii_capabilities & BMSR_100T4) 330 mii->mii_media_active |= IFM_100_T4 | IFM_HDX; 331 else if (anlpar & ANLPAR_TX && 332 sc->mii_capabilities & BMSR_100TXHDX) 333 mii->mii_media_active |= IFM_100_TX | IFM_HDX; 334 else if (anlpar & ANLPAR_10_FD) 335 mii->mii_media_active |= IFM_10_T | IFM_FDX; 336 else if (anlpar & ANLPAR_10) 337 mii->mii_media_active |= IFM_10_T | IFM_HDX; 338 else 339 mii->mii_media_active |= IFM_NONE; 340 if (DC_IS_INTEL(dc_sc)) 341 DC_CLRBIT(dc_sc, DC_10BTCTRL, 342 DC_TCTL_AUTONEGENBL); 343 return; 344 } 345 346 /* 347 * If the other side doesn't support NWAY, then the 348 * best we can do is determine if we have a 10Mbps or 349 * 100Mbps link. There's no way to know if the link 350 * is full or half duplex, so we default to half duplex 351 * and hope that the user is clever enough to manually 352 * change the media settings if we're wrong. 353 */ 354 if (!(tstat & DC_TSTAT_LS100)) 355 mii->mii_media_active |= IFM_100_TX | IFM_HDX; 356 else if (!(tstat & DC_TSTAT_LS10)) 357 mii->mii_media_active |= IFM_10_T | IFM_HDX; 358 else 359 mii->mii_media_active |= IFM_NONE; 360 if (DC_IS_INTEL(dc_sc)) 361 DC_CLRBIT(dc_sc, DC_10BTCTRL, DC_TCTL_AUTONEGENBL); 362 return; 363 } 364 365 skip: 366 if (CSR_READ_4(dc_sc, DC_NETCFG) & DC_NETCFG_SPEEDSEL) 367 mii->mii_media_active |= IFM_10_T; 368 else 369 mii->mii_media_active |= IFM_100_TX; 370 if (CSR_READ_4(dc_sc, DC_NETCFG) & DC_NETCFG_FULLDUPLEX) 371 mii->mii_media_active |= IFM_FDX; 372 else 373 mii->mii_media_active |= IFM_HDX; 374 } 375 376 static int 377 dcphy_auto(struct mii_softc *mii) 378 { 379 struct dc_softc *sc; 380 381 sc = if_getsoftc(mii->mii_pdata->mii_ifp); 382 383 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_PORTSEL); 384 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_FULLDUPLEX); 385 DC_CLRBIT(sc, DC_SIARESET, DC_SIA_RESET); 386 if (mii->mii_capabilities & BMSR_100TXHDX) 387 CSR_WRITE_4(sc, DC_10BTCTRL, 0x3FFFF); 388 else 389 CSR_WRITE_4(sc, DC_10BTCTRL, 0xFFFF); 390 DC_SETBIT(sc, DC_SIARESET, DC_SIA_RESET); 391 DC_SETBIT(sc, DC_10BTCTRL, DC_TCTL_AUTONEGENBL); 392 DC_SETBIT(sc, DC_10BTSTAT, DC_ASTAT_TXDISABLE); 393 394 return (EJUSTRETURN); 395 } 396 397 static void 398 dcphy_reset(struct mii_softc *mii) 399 { 400 struct dc_softc *sc; 401 402 sc = if_getsoftc(mii->mii_pdata->mii_ifp); 403 404 DC_CLRBIT(sc, DC_SIARESET, DC_SIA_RESET); 405 DELAY(1000); 406 DC_SETBIT(sc, DC_SIARESET, DC_SIA_RESET); 407 } 408