1 /*- 2 * Copyright (c) 2016 Chelsio Communications, Inc. 3 * All rights reserved. 4 * Written by: John Baldwin <jhb@FreeBSD.org> 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25 * SUCH DAMAGE. 26 */ 27 28 #include <sys/cdefs.h> 29 __FBSDID("$FreeBSD$"); 30 31 #include "opt_inet.h" 32 #include "opt_inet6.h" 33 34 #include <sys/param.h> 35 #include <sys/bus.h> 36 #include <sys/conf.h> 37 #include <sys/kernel.h> 38 #include <sys/module.h> 39 #include <sys/priv.h> 40 #include <dev/pci/pcivar.h> 41 #if defined(__i386__) || defined(__amd64__) 42 #include <vm/vm.h> 43 #include <vm/pmap.h> 44 #endif 45 46 #include "common/common.h" 47 #include "common/t4_regs.h" 48 #include "t4_ioctl.h" 49 #include "t4_mp_ring.h" 50 51 /* 52 * Some notes: 53 * 54 * The Virtual Interfaces are connected to an internal switch on the chip 55 * which allows VIs attached to the same port to talk to each other even when 56 * the port link is down. As a result, we might want to always report a 57 * VF's link as being "up". 58 * 59 * XXX: Add a TUNABLE and possible per-device sysctl for this? 60 */ 61 62 struct intrs_and_queues { 63 uint16_t intr_type; /* MSI, or MSI-X */ 64 uint16_t nirq; /* Total # of vectors */ 65 uint16_t ntxq; /* # of NIC txq's for each port */ 66 uint16_t nrxq; /* # of NIC rxq's for each port */ 67 }; 68 69 struct { 70 uint16_t device; 71 char *desc; 72 } t4vf_pciids[] = { 73 {0x4800, "Chelsio T440-dbg VF"}, 74 {0x4801, "Chelsio T420-CR VF"}, 75 {0x4802, "Chelsio T422-CR VF"}, 76 {0x4803, "Chelsio T440-CR VF"}, 77 {0x4804, "Chelsio T420-BCH VF"}, 78 {0x4805, "Chelsio T440-BCH VF"}, 79 {0x4806, "Chelsio T440-CH VF"}, 80 {0x4807, "Chelsio T420-SO VF"}, 81 {0x4808, "Chelsio T420-CX VF"}, 82 {0x4809, "Chelsio T420-BT VF"}, 83 {0x480a, "Chelsio T404-BT VF"}, 84 {0x480e, "Chelsio T440-LP-CR VF"}, 85 }, t5vf_pciids[] = { 86 {0x5800, "Chelsio T580-dbg VF"}, 87 {0x5801, "Chelsio T520-CR VF"}, /* 2 x 10G */ 88 {0x5802, "Chelsio T522-CR VF"}, /* 2 x 10G, 2 X 1G */ 89 {0x5803, "Chelsio T540-CR VF"}, /* 4 x 10G */ 90 {0x5807, "Chelsio T520-SO VF"}, /* 2 x 10G, nomem */ 91 {0x5809, "Chelsio T520-BT VF"}, /* 2 x 10GBaseT */ 92 {0x580a, "Chelsio T504-BT VF"}, /* 4 x 1G */ 93 {0x580d, "Chelsio T580-CR VF"}, /* 2 x 40G */ 94 {0x580e, "Chelsio T540-LP-CR VF"}, /* 4 x 10G */ 95 {0x5810, "Chelsio T580-LP-CR VF"}, /* 2 x 40G */ 96 {0x5811, "Chelsio T520-LL-CR VF"}, /* 2 x 10G */ 97 {0x5812, "Chelsio T560-CR VF"}, /* 1 x 40G, 2 x 10G */ 98 {0x5814, "Chelsio T580-LP-SO-CR VF"}, /* 2 x 40G, nomem */ 99 {0x5815, "Chelsio T502-BT VF"}, /* 2 x 1G */ 100 {0x5818, "Chelsio T540-BT VF"}, /* 4 x 10GBaseT */ 101 {0x5819, "Chelsio T540-LP-BT VF"}, /* 4 x 10GBaseT */ 102 {0x581a, "Chelsio T540-SO-BT VF"}, /* 4 x 10GBaseT, nomem */ 103 {0x581b, "Chelsio T540-SO-CR VF"}, /* 4 x 10G, nomem */ 104 }, t6vf_pciids[] = { 105 {0x6800, "Chelsio T6-DBG-25 VF"}, /* 2 x 10/25G, debug */ 106 {0x6801, "Chelsio T6225-CR VF"}, /* 2 x 10/25G */ 107 {0x6802, "Chelsio T6225-SO-CR VF"}, /* 2 x 10/25G, nomem */ 108 {0x6803, "Chelsio T6425-CR VF"}, /* 4 x 10/25G */ 109 {0x6804, "Chelsio T6425-SO-CR VF"}, /* 4 x 10/25G, nomem */ 110 {0x6805, "Chelsio T6225-OCP-SO VF"}, /* 2 x 10/25G, nomem */ 111 {0x6806, "Chelsio T62100-OCP-SO VF"}, /* 2 x 40/50/100G, nomem */ 112 {0x6807, "Chelsio T62100-LP-CR VF"}, /* 2 x 40/50/100G */ 113 {0x6808, "Chelsio T62100-SO-CR VF"}, /* 2 x 40/50/100G, nomem */ 114 {0x6809, "Chelsio T6210-BT VF"}, /* 2 x 10GBASE-T */ 115 {0x680d, "Chelsio T62100-CR VF"}, /* 2 x 40/50/100G */ 116 {0x6810, "Chelsio T6-DBG-100 VF"}, /* 2 x 40/50/100G, debug */ 117 {0x6811, "Chelsio T6225-LL-CR VF"}, /* 2 x 10/25G */ 118 {0x6814, "Chelsio T61100-OCP-SO VF"}, /* 1 x 40/50/100G, nomem */ 119 {0x6815, "Chelsio T6201-BT VF"}, /* 2 x 1000BASE-T */ 120 121 /* Custom */ 122 {0x6880, "Chelsio T6225 80 VF"}, 123 {0x6881, "Chelsio T62100 81 VF"}, 124 {0x6882, "Chelsio T6225-CR 82 VF"}, 125 {0x6883, "Chelsio T62100-CR 83 VF"}, 126 {0x6884, "Chelsio T64100-CR 84 VF"}, 127 {0x6885, "Chelsio T6240-SO 85 VF"}, 128 {0x6886, "Chelsio T6225-SO-CR 86 VF"}, 129 {0x6887, "Chelsio T6225-CR 87 VF"}, 130 }; 131 132 static d_ioctl_t t4vf_ioctl; 133 134 static struct cdevsw t4vf_cdevsw = { 135 .d_version = D_VERSION, 136 .d_ioctl = t4vf_ioctl, 137 .d_name = "t4vf", 138 }; 139 140 static int 141 t4vf_probe(device_t dev) 142 { 143 uint16_t d; 144 size_t i; 145 146 d = pci_get_device(dev); 147 for (i = 0; i < nitems(t4vf_pciids); i++) { 148 if (d == t4vf_pciids[i].device) { 149 device_set_desc(dev, t4vf_pciids[i].desc); 150 return (BUS_PROBE_DEFAULT); 151 } 152 } 153 return (ENXIO); 154 } 155 156 static int 157 t5vf_probe(device_t dev) 158 { 159 uint16_t d; 160 size_t i; 161 162 d = pci_get_device(dev); 163 for (i = 0; i < nitems(t5vf_pciids); i++) { 164 if (d == t5vf_pciids[i].device) { 165 device_set_desc(dev, t5vf_pciids[i].desc); 166 return (BUS_PROBE_DEFAULT); 167 } 168 } 169 return (ENXIO); 170 } 171 172 static int 173 t6vf_probe(device_t dev) 174 { 175 uint16_t d; 176 size_t i; 177 178 d = pci_get_device(dev); 179 for (i = 0; i < nitems(t6vf_pciids); i++) { 180 if (d == t6vf_pciids[i].device) { 181 device_set_desc(dev, t6vf_pciids[i].desc); 182 return (BUS_PROBE_DEFAULT); 183 } 184 } 185 return (ENXIO); 186 } 187 188 #define FW_PARAM_DEV(param) \ 189 (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | \ 190 V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_##param)) 191 #define FW_PARAM_PFVF(param) \ 192 (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_PFVF) | \ 193 V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_PFVF_##param)) 194 195 static int 196 get_params__pre_init(struct adapter *sc) 197 { 198 int rc; 199 uint32_t param[3], val[3]; 200 201 param[0] = FW_PARAM_DEV(FWREV); 202 param[1] = FW_PARAM_DEV(TPREV); 203 param[2] = FW_PARAM_DEV(CCLK); 204 rc = -t4vf_query_params(sc, nitems(param), param, val); 205 if (rc != 0) { 206 device_printf(sc->dev, 207 "failed to query parameters (pre_init): %d.\n", rc); 208 return (rc); 209 } 210 211 sc->params.fw_vers = val[0]; 212 sc->params.tp_vers = val[1]; 213 sc->params.vpd.cclk = val[2]; 214 215 snprintf(sc->fw_version, sizeof(sc->fw_version), "%u.%u.%u.%u", 216 G_FW_HDR_FW_VER_MAJOR(sc->params.fw_vers), 217 G_FW_HDR_FW_VER_MINOR(sc->params.fw_vers), 218 G_FW_HDR_FW_VER_MICRO(sc->params.fw_vers), 219 G_FW_HDR_FW_VER_BUILD(sc->params.fw_vers)); 220 221 snprintf(sc->tp_version, sizeof(sc->tp_version), "%u.%u.%u.%u", 222 G_FW_HDR_FW_VER_MAJOR(sc->params.tp_vers), 223 G_FW_HDR_FW_VER_MINOR(sc->params.tp_vers), 224 G_FW_HDR_FW_VER_MICRO(sc->params.tp_vers), 225 G_FW_HDR_FW_VER_BUILD(sc->params.tp_vers)); 226 227 return (0); 228 } 229 230 static int 231 get_params__post_init(struct adapter *sc) 232 { 233 int rc; 234 235 rc = -t4vf_get_sge_params(sc); 236 if (rc != 0) { 237 device_printf(sc->dev, 238 "unable to retrieve adapter SGE parameters: %d\n", rc); 239 return (rc); 240 } 241 242 rc = -t4vf_get_rss_glb_config(sc); 243 if (rc != 0) { 244 device_printf(sc->dev, 245 "unable to retrieve adapter RSS parameters: %d\n", rc); 246 return (rc); 247 } 248 if (sc->params.rss.mode != FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL) { 249 device_printf(sc->dev, 250 "unable to operate with global RSS mode %d\n", 251 sc->params.rss.mode); 252 return (EINVAL); 253 } 254 255 rc = t4_read_chip_settings(sc); 256 if (rc != 0) 257 return (rc); 258 259 /* 260 * Grab our Virtual Interface resource allocation, extract the 261 * features that we're interested in and do a bit of sanity testing on 262 * what we discover. 263 */ 264 rc = -t4vf_get_vfres(sc); 265 if (rc != 0) { 266 device_printf(sc->dev, 267 "unable to get virtual interface resources: %d\n", rc); 268 return (rc); 269 } 270 271 /* 272 * Check for various parameter sanity issues. 273 */ 274 if (sc->params.vfres.pmask == 0) { 275 device_printf(sc->dev, "no port access configured/usable!\n"); 276 return (EINVAL); 277 } 278 if (sc->params.vfres.nvi == 0) { 279 device_printf(sc->dev, 280 "no virtual interfaces configured/usable!\n"); 281 return (EINVAL); 282 } 283 sc->params.portvec = sc->params.vfres.pmask; 284 285 return (0); 286 } 287 288 static int 289 set_params__post_init(struct adapter *sc) 290 { 291 uint32_t param, val; 292 293 /* ask for encapsulated CPLs */ 294 param = FW_PARAM_PFVF(CPLFW4MSG_ENCAP); 295 val = 1; 296 (void)t4vf_set_params(sc, 1, ¶m, &val); 297 298 /* Enable 32b port caps if the firmware supports it. */ 299 param = FW_PARAM_PFVF(PORT_CAPS32); 300 val = 1; 301 if (t4vf_set_params(sc, 1, ¶m, &val) == 0) 302 sc->params.port_caps32 = 1; 303 304 return (0); 305 } 306 307 #undef FW_PARAM_PFVF 308 #undef FW_PARAM_DEV 309 310 static int 311 cfg_itype_and_nqueues(struct adapter *sc, struct intrs_and_queues *iaq) 312 { 313 struct vf_resources *vfres; 314 int nrxq, ntxq, nports; 315 int itype, iq_avail, navail, rc; 316 317 /* 318 * Figure out the layout of queues across our VIs and ensure 319 * we can allocate enough interrupts for our layout. 320 */ 321 vfres = &sc->params.vfres; 322 nports = sc->params.nports; 323 bzero(iaq, sizeof(*iaq)); 324 325 for (itype = INTR_MSIX; itype != 0; itype >>= 1) { 326 if (itype == INTR_INTX) 327 continue; 328 329 if (itype == INTR_MSIX) 330 navail = pci_msix_count(sc->dev); 331 else 332 navail = pci_msi_count(sc->dev); 333 334 if (navail == 0) 335 continue; 336 337 iaq->intr_type = itype; 338 339 /* 340 * XXX: The Linux driver reserves an Ingress Queue for 341 * forwarded interrupts when using MSI (but not MSI-X). 342 * It seems it just always asks for 2 interrupts and 343 * forwards all rxqs to the forwarded interrupt. 344 * 345 * We must reserve one IRQ for the for the firmware 346 * event queue. 347 * 348 * Every rxq requires an ingress queue with a free 349 * list and interrupts and an egress queue. Every txq 350 * requires an ETH egress queue. 351 */ 352 iaq->nirq = T4VF_EXTRA_INTR; 353 354 /* 355 * First, determine how many queues we can allocate. 356 * Start by finding the upper bound on rxqs from the 357 * limit on ingress queues. 358 */ 359 iq_avail = vfres->niqflint - iaq->nirq; 360 if (iq_avail < nports) { 361 device_printf(sc->dev, 362 "Not enough ingress queues (%d) for %d ports\n", 363 vfres->niqflint, nports); 364 return (ENXIO); 365 } 366 367 /* 368 * Try to honor the cap on interrupts. If there aren't 369 * enough interrupts for at least one interrupt per 370 * port, then don't bother, we will just forward all 371 * interrupts to one interrupt in that case. 372 */ 373 if (iaq->nirq + nports <= navail) { 374 if (iq_avail > navail - iaq->nirq) 375 iq_avail = navail - iaq->nirq; 376 } 377 378 nrxq = nports * t4_nrxq; 379 if (nrxq > iq_avail) { 380 /* 381 * Too many ingress queues. Use what we can. 382 */ 383 nrxq = (iq_avail / nports) * nports; 384 } 385 KASSERT(nrxq <= iq_avail, ("too many ingress queues")); 386 387 /* 388 * Next, determine the upper bound on txqs from the limit 389 * on ETH queues. 390 */ 391 if (vfres->nethctrl < nports) { 392 device_printf(sc->dev, 393 "Not enough ETH queues (%d) for %d ports\n", 394 vfres->nethctrl, nports); 395 return (ENXIO); 396 } 397 398 ntxq = nports * t4_ntxq; 399 if (ntxq > vfres->nethctrl) { 400 /* 401 * Too many ETH queues. Use what we can. 402 */ 403 ntxq = (vfres->nethctrl / nports) * nports; 404 } 405 KASSERT(ntxq <= vfres->nethctrl, ("too many ETH queues")); 406 407 /* 408 * Finally, ensure we have enough egress queues. 409 */ 410 if (vfres->neq < nports * 2) { 411 device_printf(sc->dev, 412 "Not enough egress queues (%d) for %d ports\n", 413 vfres->neq, nports); 414 return (ENXIO); 415 } 416 if (nrxq + ntxq > vfres->neq) { 417 /* Just punt and use 1 for everything. */ 418 nrxq = ntxq = nports; 419 } 420 KASSERT(nrxq <= iq_avail, ("too many ingress queues")); 421 KASSERT(ntxq <= vfres->nethctrl, ("too many ETH queues")); 422 KASSERT(nrxq + ntxq <= vfres->neq, ("too many egress queues")); 423 424 /* 425 * Do we have enough interrupts? For MSI the interrupts 426 * have to be a power of 2 as well. 427 */ 428 iaq->nirq += nrxq; 429 iaq->ntxq = ntxq; 430 iaq->nrxq = nrxq; 431 if (iaq->nirq <= navail && 432 (itype != INTR_MSI || powerof2(iaq->nirq))) { 433 navail = iaq->nirq; 434 if (itype == INTR_MSIX) 435 rc = pci_alloc_msix(sc->dev, &navail); 436 else 437 rc = pci_alloc_msi(sc->dev, &navail); 438 if (rc != 0) { 439 device_printf(sc->dev, 440 "failed to allocate vectors:%d, type=%d, req=%d, rcvd=%d\n", 441 itype, rc, iaq->nirq, navail); 442 return (rc); 443 } 444 if (navail == iaq->nirq) { 445 return (0); 446 } 447 pci_release_msi(sc->dev); 448 } 449 450 /* Fall back to a single interrupt. */ 451 iaq->nirq = 1; 452 navail = iaq->nirq; 453 if (itype == INTR_MSIX) 454 rc = pci_alloc_msix(sc->dev, &navail); 455 else 456 rc = pci_alloc_msi(sc->dev, &navail); 457 if (rc != 0) 458 device_printf(sc->dev, 459 "failed to allocate vectors:%d, type=%d, req=%d, rcvd=%d\n", 460 itype, rc, iaq->nirq, navail); 461 return (rc); 462 } 463 464 device_printf(sc->dev, 465 "failed to find a usable interrupt type. " 466 "allowed=%d, msi-x=%d, msi=%d, intx=1", t4_intr_types, 467 pci_msix_count(sc->dev), pci_msi_count(sc->dev)); 468 469 return (ENXIO); 470 } 471 472 static int 473 t4vf_attach(device_t dev) 474 { 475 struct adapter *sc; 476 int rc = 0, i, j, rqidx, tqidx; 477 struct make_dev_args mda; 478 struct intrs_and_queues iaq; 479 struct sge *s; 480 481 sc = device_get_softc(dev); 482 sc->dev = dev; 483 pci_enable_busmaster(dev); 484 pci_set_max_read_req(dev, 4096); 485 sc->params.pci.mps = pci_get_max_payload(dev); 486 487 sc->flags |= IS_VF; 488 TUNABLE_INT_FETCH("hw.cxgbe.dflags", &sc->debug_flags); 489 490 sc->sge_gts_reg = VF_SGE_REG(A_SGE_VF_GTS); 491 sc->sge_kdoorbell_reg = VF_SGE_REG(A_SGE_VF_KDOORBELL); 492 snprintf(sc->lockname, sizeof(sc->lockname), "%s", 493 device_get_nameunit(dev)); 494 mtx_init(&sc->sc_lock, sc->lockname, 0, MTX_DEF); 495 t4_add_adapter(sc); 496 497 mtx_init(&sc->sfl_lock, "starving freelists", 0, MTX_DEF); 498 TAILQ_INIT(&sc->sfl); 499 callout_init_mtx(&sc->sfl_callout, &sc->sfl_lock, 0); 500 501 mtx_init(&sc->reg_lock, "indirect register access", 0, MTX_DEF); 502 503 rc = t4_map_bars_0_and_4(sc); 504 if (rc != 0) 505 goto done; /* error message displayed already */ 506 507 rc = -t4vf_prep_adapter(sc); 508 if (rc != 0) 509 goto done; 510 511 t4_init_devnames(sc); 512 if (sc->names == NULL) { 513 rc = ENOTSUP; 514 goto done; /* error message displayed already */ 515 } 516 517 /* 518 * Leave the 'pf' and 'mbox' values as zero. This ensures 519 * that various firmware messages do not set the fields which 520 * is the correct thing to do for a VF. 521 */ 522 523 memset(sc->chan_map, 0xff, sizeof(sc->chan_map)); 524 525 make_dev_args_init(&mda); 526 mda.mda_devsw = &t4vf_cdevsw; 527 mda.mda_uid = UID_ROOT; 528 mda.mda_gid = GID_WHEEL; 529 mda.mda_mode = 0600; 530 mda.mda_si_drv1 = sc; 531 rc = make_dev_s(&mda, &sc->cdev, "%s", device_get_nameunit(dev)); 532 if (rc != 0) 533 device_printf(dev, "failed to create nexus char device: %d.\n", 534 rc); 535 536 #if defined(__i386__) 537 if ((cpu_feature & CPUID_CX8) == 0) { 538 device_printf(dev, "64 bit atomics not available.\n"); 539 rc = ENOTSUP; 540 goto done; 541 } 542 #endif 543 544 /* 545 * Some environments do not properly handle PCIE FLRs -- e.g. in Linux 546 * 2.6.31 and later we can't call pci_reset_function() in order to 547 * issue an FLR because of a self- deadlock on the device semaphore. 548 * Meanwhile, the OS infrastructure doesn't issue FLRs in all the 549 * cases where they're needed -- for instance, some versions of KVM 550 * fail to reset "Assigned Devices" when the VM reboots. Therefore we 551 * use the firmware based reset in order to reset any per function 552 * state. 553 */ 554 rc = -t4vf_fw_reset(sc); 555 if (rc != 0) { 556 device_printf(dev, "FW reset failed: %d\n", rc); 557 goto done; 558 } 559 sc->flags |= FW_OK; 560 561 /* 562 * Grab basic operational parameters. These will predominantly have 563 * been set up by the Physical Function Driver or will be hard coded 564 * into the adapter. We just have to live with them ... Note that 565 * we _must_ get our VPD parameters before our SGE parameters because 566 * we need to know the adapter's core clock from the VPD in order to 567 * properly decode the SGE Timer Values. 568 */ 569 rc = get_params__pre_init(sc); 570 if (rc != 0) 571 goto done; /* error message displayed already */ 572 rc = get_params__post_init(sc); 573 if (rc != 0) 574 goto done; /* error message displayed already */ 575 576 rc = set_params__post_init(sc); 577 if (rc != 0) 578 goto done; /* error message displayed already */ 579 580 rc = t4_map_bar_2(sc); 581 if (rc != 0) 582 goto done; /* error message displayed already */ 583 584 rc = t4_create_dma_tag(sc); 585 if (rc != 0) 586 goto done; /* error message displayed already */ 587 588 /* 589 * The number of "ports" which we support is equal to the number of 590 * Virtual Interfaces with which we've been provisioned. 591 */ 592 sc->params.nports = imin(sc->params.vfres.nvi, MAX_NPORTS); 593 594 /* 595 * We may have been provisioned with more VIs than the number of 596 * ports we're allowed to access (our Port Access Rights Mask). 597 * Just use a single VI for each port. 598 */ 599 sc->params.nports = imin(sc->params.nports, 600 bitcount32(sc->params.vfres.pmask)); 601 602 #ifdef notyet 603 /* 604 * XXX: The Linux VF driver will lower nports if it thinks there 605 * are too few resources in vfres (niqflint, nethctrl, neq). 606 */ 607 #endif 608 609 /* 610 * First pass over all the ports - allocate VIs and initialize some 611 * basic parameters like mac address, port type, etc. 612 */ 613 for_each_port(sc, i) { 614 struct port_info *pi; 615 616 pi = malloc(sizeof(*pi), M_CXGBE, M_ZERO | M_WAITOK); 617 sc->port[i] = pi; 618 619 /* These must be set before t4_port_init */ 620 pi->adapter = sc; 621 pi->port_id = i; 622 pi->nvi = 1; 623 pi->vi = malloc(sizeof(struct vi_info) * pi->nvi, M_CXGBE, 624 M_ZERO | M_WAITOK); 625 626 /* 627 * Allocate the "main" VI and initialize parameters 628 * like mac addr. 629 */ 630 rc = -t4_port_init(sc, sc->mbox, sc->pf, 0, i); 631 if (rc != 0) { 632 device_printf(dev, "unable to initialize port %d: %d\n", 633 i, rc); 634 free(pi->vi, M_CXGBE); 635 free(pi, M_CXGBE); 636 sc->port[i] = NULL; 637 goto done; 638 } 639 640 /* No t4_link_start. */ 641 642 snprintf(pi->lockname, sizeof(pi->lockname), "%sp%d", 643 device_get_nameunit(dev), i); 644 mtx_init(&pi->pi_lock, pi->lockname, 0, MTX_DEF); 645 sc->chan_map[pi->tx_chan] = i; 646 647 /* All VIs on this port share this media. */ 648 ifmedia_init(&pi->media, IFM_IMASK, cxgbe_media_change, 649 cxgbe_media_status); 650 651 pi->dev = device_add_child(dev, sc->names->vf_ifnet_name, -1); 652 if (pi->dev == NULL) { 653 device_printf(dev, 654 "failed to add device for port %d.\n", i); 655 rc = ENXIO; 656 goto done; 657 } 658 pi->vi[0].dev = pi->dev; 659 device_set_softc(pi->dev, pi); 660 } 661 662 /* 663 * Interrupt type, # of interrupts, # of rx/tx queues, etc. 664 */ 665 rc = cfg_itype_and_nqueues(sc, &iaq); 666 if (rc != 0) 667 goto done; /* error message displayed already */ 668 669 sc->intr_type = iaq.intr_type; 670 sc->intr_count = iaq.nirq; 671 672 s = &sc->sge; 673 s->nrxq = sc->params.nports * iaq.nrxq; 674 s->ntxq = sc->params.nports * iaq.ntxq; 675 s->neq = s->ntxq + s->nrxq; /* the free list in an rxq is an eq */ 676 s->neq += sc->params.nports; /* ctrl queues: 1 per port */ 677 s->niq = s->nrxq + 1; /* 1 extra for firmware event queue */ 678 679 s->rxq = malloc(s->nrxq * sizeof(struct sge_rxq), M_CXGBE, 680 M_ZERO | M_WAITOK); 681 s->txq = malloc(s->ntxq * sizeof(struct sge_txq), M_CXGBE, 682 M_ZERO | M_WAITOK); 683 s->iqmap = malloc(s->niq * sizeof(struct sge_iq *), M_CXGBE, 684 M_ZERO | M_WAITOK); 685 s->eqmap = malloc(s->neq * sizeof(struct sge_eq *), M_CXGBE, 686 M_ZERO | M_WAITOK); 687 688 sc->irq = malloc(sc->intr_count * sizeof(struct irq), M_CXGBE, 689 M_ZERO | M_WAITOK); 690 691 /* 692 * Second pass over the ports. This time we know the number of rx and 693 * tx queues that each port should get. 694 */ 695 rqidx = tqidx = 0; 696 for_each_port(sc, i) { 697 struct port_info *pi = sc->port[i]; 698 struct vi_info *vi; 699 700 if (pi == NULL) 701 continue; 702 703 for_each_vi(pi, j, vi) { 704 vi->pi = pi; 705 vi->qsize_rxq = t4_qsize_rxq; 706 vi->qsize_txq = t4_qsize_txq; 707 708 vi->first_rxq = rqidx; 709 vi->first_txq = tqidx; 710 vi->tmr_idx = t4_tmr_idx; 711 vi->pktc_idx = t4_pktc_idx; 712 vi->nrxq = j == 0 ? iaq.nrxq: 1; 713 vi->ntxq = j == 0 ? iaq.ntxq: 1; 714 715 rqidx += vi->nrxq; 716 tqidx += vi->ntxq; 717 718 vi->rsrv_noflowq = 0; 719 } 720 } 721 722 rc = t4_setup_intr_handlers(sc); 723 if (rc != 0) { 724 device_printf(dev, 725 "failed to setup interrupt handlers: %d\n", rc); 726 goto done; 727 } 728 729 rc = bus_generic_attach(dev); 730 if (rc != 0) { 731 device_printf(dev, 732 "failed to attach all child ports: %d\n", rc); 733 goto done; 734 } 735 736 device_printf(dev, 737 "%d ports, %d %s interrupt%s, %d eq, %d iq\n", 738 sc->params.nports, sc->intr_count, sc->intr_type == INTR_MSIX ? 739 "MSI-X" : "MSI", sc->intr_count > 1 ? "s" : "", sc->sge.neq, 740 sc->sge.niq); 741 742 done: 743 if (rc != 0) 744 t4_detach_common(dev); 745 else 746 t4_sysctls(sc); 747 748 return (rc); 749 } 750 751 static void 752 get_regs(struct adapter *sc, struct t4_regdump *regs, uint8_t *buf) 753 { 754 755 /* 0x3f is used as the revision for VFs. */ 756 regs->version = chip_id(sc) | (0x3f << 10); 757 t4_get_regs(sc, buf, regs->len); 758 } 759 760 static void 761 t4_clr_vi_stats(struct adapter *sc) 762 { 763 int reg; 764 765 for (reg = A_MPS_VF_STAT_TX_VF_BCAST_BYTES_L; 766 reg <= A_MPS_VF_STAT_RX_VF_ERR_FRAMES_H; reg += 4) 767 t4_write_reg(sc, VF_MPS_REG(reg), 0); 768 } 769 770 static int 771 t4vf_ioctl(struct cdev *dev, unsigned long cmd, caddr_t data, int fflag, 772 struct thread *td) 773 { 774 int rc; 775 struct adapter *sc = dev->si_drv1; 776 777 rc = priv_check(td, PRIV_DRIVER); 778 if (rc != 0) 779 return (rc); 780 781 switch (cmd) { 782 case CHELSIO_T4_GETREG: { 783 struct t4_reg *edata = (struct t4_reg *)data; 784 785 if ((edata->addr & 0x3) != 0 || edata->addr >= sc->mmio_len) 786 return (EFAULT); 787 788 if (edata->size == 4) 789 edata->val = t4_read_reg(sc, edata->addr); 790 else if (edata->size == 8) 791 edata->val = t4_read_reg64(sc, edata->addr); 792 else 793 return (EINVAL); 794 795 break; 796 } 797 case CHELSIO_T4_SETREG: { 798 struct t4_reg *edata = (struct t4_reg *)data; 799 800 if ((edata->addr & 0x3) != 0 || edata->addr >= sc->mmio_len) 801 return (EFAULT); 802 803 if (edata->size == 4) { 804 if (edata->val & 0xffffffff00000000) 805 return (EINVAL); 806 t4_write_reg(sc, edata->addr, (uint32_t) edata->val); 807 } else if (edata->size == 8) 808 t4_write_reg64(sc, edata->addr, edata->val); 809 else 810 return (EINVAL); 811 break; 812 } 813 case CHELSIO_T4_REGDUMP: { 814 struct t4_regdump *regs = (struct t4_regdump *)data; 815 int reglen = t4_get_regs_len(sc); 816 uint8_t *buf; 817 818 if (regs->len < reglen) { 819 regs->len = reglen; /* hint to the caller */ 820 return (ENOBUFS); 821 } 822 823 regs->len = reglen; 824 buf = malloc(reglen, M_CXGBE, M_WAITOK | M_ZERO); 825 get_regs(sc, regs, buf); 826 rc = copyout(buf, regs->data, reglen); 827 free(buf, M_CXGBE); 828 break; 829 } 830 case CHELSIO_T4_CLEAR_STATS: { 831 int i, v; 832 u_int port_id = *(uint32_t *)data; 833 struct port_info *pi; 834 struct vi_info *vi; 835 836 if (port_id >= sc->params.nports) 837 return (EINVAL); 838 pi = sc->port[port_id]; 839 840 /* MAC stats */ 841 pi->tx_parse_error = 0; 842 t4_clr_vi_stats(sc); 843 844 /* 845 * Since this command accepts a port, clear stats for 846 * all VIs on this port. 847 */ 848 for_each_vi(pi, v, vi) { 849 if (vi->flags & VI_INIT_DONE) { 850 struct sge_rxq *rxq; 851 struct sge_txq *txq; 852 853 for_each_rxq(vi, i, rxq) { 854 #if defined(INET) || defined(INET6) 855 rxq->lro.lro_queued = 0; 856 rxq->lro.lro_flushed = 0; 857 #endif 858 rxq->rxcsum = 0; 859 rxq->vlan_extraction = 0; 860 } 861 862 for_each_txq(vi, i, txq) { 863 txq->txcsum = 0; 864 txq->tso_wrs = 0; 865 txq->vlan_insertion = 0; 866 txq->imm_wrs = 0; 867 txq->sgl_wrs = 0; 868 txq->txpkt_wrs = 0; 869 txq->txpkts0_wrs = 0; 870 txq->txpkts1_wrs = 0; 871 txq->txpkts0_pkts = 0; 872 txq->txpkts1_pkts = 0; 873 mp_ring_reset_stats(txq->r); 874 } 875 } 876 } 877 break; 878 } 879 case CHELSIO_T4_SCHED_CLASS: 880 rc = t4_set_sched_class(sc, (struct t4_sched_params *)data); 881 break; 882 case CHELSIO_T4_SCHED_QUEUE: 883 rc = t4_set_sched_queue(sc, (struct t4_sched_queue *)data); 884 break; 885 default: 886 rc = ENOTTY; 887 } 888 889 return (rc); 890 } 891 892 static device_method_t t4vf_methods[] = { 893 DEVMETHOD(device_probe, t4vf_probe), 894 DEVMETHOD(device_attach, t4vf_attach), 895 DEVMETHOD(device_detach, t4_detach_common), 896 897 DEVMETHOD_END 898 }; 899 900 static driver_t t4vf_driver = { 901 "t4vf", 902 t4vf_methods, 903 sizeof(struct adapter) 904 }; 905 906 static device_method_t t5vf_methods[] = { 907 DEVMETHOD(device_probe, t5vf_probe), 908 DEVMETHOD(device_attach, t4vf_attach), 909 DEVMETHOD(device_detach, t4_detach_common), 910 911 DEVMETHOD_END 912 }; 913 914 static driver_t t5vf_driver = { 915 "t5vf", 916 t5vf_methods, 917 sizeof(struct adapter) 918 }; 919 920 static device_method_t t6vf_methods[] = { 921 DEVMETHOD(device_probe, t6vf_probe), 922 DEVMETHOD(device_attach, t4vf_attach), 923 DEVMETHOD(device_detach, t4_detach_common), 924 925 DEVMETHOD_END 926 }; 927 928 static driver_t t6vf_driver = { 929 "t6vf", 930 t6vf_methods, 931 sizeof(struct adapter) 932 }; 933 934 static driver_t cxgbev_driver = { 935 "cxgbev", 936 cxgbe_methods, 937 sizeof(struct port_info) 938 }; 939 940 static driver_t cxlv_driver = { 941 "cxlv", 942 cxgbe_methods, 943 sizeof(struct port_info) 944 }; 945 946 static driver_t ccv_driver = { 947 "ccv", 948 cxgbe_methods, 949 sizeof(struct port_info) 950 }; 951 952 static devclass_t t4vf_devclass, t5vf_devclass, t6vf_devclass; 953 static devclass_t cxgbev_devclass, cxlv_devclass, ccv_devclass; 954 955 DRIVER_MODULE(t4vf, pci, t4vf_driver, t4vf_devclass, 0, 0); 956 MODULE_VERSION(t4vf, 1); 957 MODULE_DEPEND(t4vf, t4nex, 1, 1, 1); 958 959 DRIVER_MODULE(t5vf, pci, t5vf_driver, t5vf_devclass, 0, 0); 960 MODULE_VERSION(t5vf, 1); 961 MODULE_DEPEND(t5vf, t5nex, 1, 1, 1); 962 963 DRIVER_MODULE(t6vf, pci, t6vf_driver, t6vf_devclass, 0, 0); 964 MODULE_VERSION(t6vf, 1); 965 MODULE_DEPEND(t6vf, t6nex, 1, 1, 1); 966 967 DRIVER_MODULE(cxgbev, t4vf, cxgbev_driver, cxgbev_devclass, 0, 0); 968 MODULE_VERSION(cxgbev, 1); 969 970 DRIVER_MODULE(cxlv, t5vf, cxlv_driver, cxlv_devclass, 0, 0); 971 MODULE_VERSION(cxlv, 1); 972 973 DRIVER_MODULE(ccv, t6vf, ccv_driver, ccv_devclass, 0, 0); 974 MODULE_VERSION(ccv, 1); 975