1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 2012, 2016 Chelsio Communications, Inc. 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29 #include <sys/cdefs.h> 30 #include "opt_inet.h" 31 32 #include <sys/param.h> 33 #include <sys/eventhandler.h> 34 35 #include "common.h" 36 #include "t4_regs.h" 37 #include "t4_regs_values.h" 38 #include "firmware/t4fw_interface.h" 39 40 #undef msleep 41 #define msleep(x) do { \ 42 if (cold) \ 43 DELAY((x) * 1000); \ 44 else \ 45 pause("t4hw", (x) * hz / 1000); \ 46 } while (0) 47 48 /** 49 * t4_wait_op_done_val - wait until an operation is completed 50 * @adapter: the adapter performing the operation 51 * @reg: the register to check for completion 52 * @mask: a single-bit field within @reg that indicates completion 53 * @polarity: the value of the field when the operation is completed 54 * @attempts: number of check iterations 55 * @delay: delay in usecs between iterations 56 * @valp: where to store the value of the register at completion time 57 * 58 * Wait until an operation is completed by checking a bit in a register 59 * up to @attempts times. If @valp is not NULL the value of the register 60 * at the time it indicated completion is stored there. Returns 0 if the 61 * operation completes and -EAGAIN otherwise. 62 */ 63 static int t4_wait_op_done_val(struct adapter *adapter, int reg, u32 mask, 64 int polarity, int attempts, int delay, u32 *valp) 65 { 66 while (1) { 67 u32 val = t4_read_reg(adapter, reg); 68 69 if (!!(val & mask) == polarity) { 70 if (valp) 71 *valp = val; 72 return 0; 73 } 74 if (--attempts == 0) 75 return -EAGAIN; 76 if (delay) 77 udelay(delay); 78 } 79 } 80 81 static inline int t4_wait_op_done(struct adapter *adapter, int reg, u32 mask, 82 int polarity, int attempts, int delay) 83 { 84 return t4_wait_op_done_val(adapter, reg, mask, polarity, attempts, 85 delay, NULL); 86 } 87 88 /** 89 * t4_set_reg_field - set a register field to a value 90 * @adapter: the adapter to program 91 * @addr: the register address 92 * @mask: specifies the portion of the register to modify 93 * @val: the new value for the register field 94 * 95 * Sets a register field specified by the supplied mask to the 96 * given value. 97 */ 98 void t4_set_reg_field(struct adapter *adapter, unsigned int addr, u32 mask, 99 u32 val) 100 { 101 u32 v = t4_read_reg(adapter, addr) & ~mask; 102 103 t4_write_reg(adapter, addr, v | val); 104 (void) t4_read_reg(adapter, addr); /* flush */ 105 } 106 107 /** 108 * t4_read_indirect - read indirectly addressed registers 109 * @adap: the adapter 110 * @addr_reg: register holding the indirect address 111 * @data_reg: register holding the value of the indirect register 112 * @vals: where the read register values are stored 113 * @nregs: how many indirect registers to read 114 * @start_idx: index of first indirect register to read 115 * 116 * Reads registers that are accessed indirectly through an address/data 117 * register pair. 118 */ 119 void t4_read_indirect(struct adapter *adap, unsigned int addr_reg, 120 unsigned int data_reg, u32 *vals, 121 unsigned int nregs, unsigned int start_idx) 122 { 123 while (nregs--) { 124 t4_write_reg(adap, addr_reg, start_idx); 125 *vals++ = t4_read_reg(adap, data_reg); 126 start_idx++; 127 } 128 } 129 130 /** 131 * t4_write_indirect - write indirectly addressed registers 132 * @adap: the adapter 133 * @addr_reg: register holding the indirect addresses 134 * @data_reg: register holding the value for the indirect registers 135 * @vals: values to write 136 * @nregs: how many indirect registers to write 137 * @start_idx: address of first indirect register to write 138 * 139 * Writes a sequential block of registers that are accessed indirectly 140 * through an address/data register pair. 141 */ 142 void t4_write_indirect(struct adapter *adap, unsigned int addr_reg, 143 unsigned int data_reg, const u32 *vals, 144 unsigned int nregs, unsigned int start_idx) 145 { 146 while (nregs--) { 147 t4_write_reg(adap, addr_reg, start_idx++); 148 t4_write_reg(adap, data_reg, *vals++); 149 } 150 } 151 152 /* 153 * Read a 32-bit PCI Configuration Space register via the PCI-E backdoor 154 * mechanism. This guarantees that we get the real value even if we're 155 * operating within a Virtual Machine and the Hypervisor is trapping our 156 * Configuration Space accesses. 157 * 158 * N.B. This routine should only be used as a last resort: the firmware uses 159 * the backdoor registers on a regular basis and we can end up 160 * conflicting with it's uses! 161 */ 162 u32 t4_hw_pci_read_cfg4(adapter_t *adap, int reg) 163 { 164 u32 req = V_FUNCTION(adap->pf) | V_REGISTER(reg); 165 u32 val; 166 167 if (chip_id(adap) <= CHELSIO_T5) 168 req |= F_ENABLE; 169 else 170 req |= F_T6_ENABLE; 171 172 if (is_t4(adap)) 173 req |= F_LOCALCFG; 174 175 t4_write_reg(adap, A_PCIE_CFG_SPACE_REQ, req); 176 val = t4_read_reg(adap, A_PCIE_CFG_SPACE_DATA); 177 178 /* 179 * Reset F_ENABLE to 0 so reads of PCIE_CFG_SPACE_DATA won't cause a 180 * Configuration Space read. (None of the other fields matter when 181 * F_ENABLE is 0 so a simple register write is easier than a 182 * read-modify-write via t4_set_reg_field().) 183 */ 184 t4_write_reg(adap, A_PCIE_CFG_SPACE_REQ, 0); 185 186 return val; 187 } 188 189 /* 190 * t4_report_fw_error - report firmware error 191 * @adap: the adapter 192 * 193 * The adapter firmware can indicate error conditions to the host. 194 * If the firmware has indicated an error, print out the reason for 195 * the firmware error. 196 */ 197 void t4_report_fw_error(struct adapter *adap) 198 { 199 static const char *const reason[] = { 200 "Crash", /* PCIE_FW_EVAL_CRASH */ 201 "During Device Preparation", /* PCIE_FW_EVAL_PREP */ 202 "During Device Configuration", /* PCIE_FW_EVAL_CONF */ 203 "During Device Initialization", /* PCIE_FW_EVAL_INIT */ 204 "Unexpected Event", /* PCIE_FW_EVAL_UNEXPECTEDEVENT */ 205 "Insufficient Airflow", /* PCIE_FW_EVAL_OVERHEAT */ 206 "Device Shutdown", /* PCIE_FW_EVAL_DEVICESHUTDOWN */ 207 "Reserved", /* reserved */ 208 }; 209 u32 pcie_fw; 210 211 pcie_fw = t4_read_reg(adap, A_PCIE_FW); 212 if (pcie_fw & F_PCIE_FW_ERR) { 213 CH_ERR(adap, "firmware reports adapter error: %s (0x%08x)\n", 214 reason[G_PCIE_FW_EVAL(pcie_fw)], pcie_fw); 215 } 216 } 217 218 /* 219 * Get the reply to a mailbox command and store it in @rpl in big-endian order. 220 */ 221 static void get_mbox_rpl(struct adapter *adap, __be64 *rpl, int nflit, 222 u32 mbox_addr) 223 { 224 for ( ; nflit; nflit--, mbox_addr += 8) 225 *rpl++ = cpu_to_be64(t4_read_reg64(adap, mbox_addr)); 226 } 227 228 /* 229 * Handle a FW assertion reported in a mailbox. 230 */ 231 static void fw_asrt(struct adapter *adap, struct fw_debug_cmd *asrt) 232 { 233 CH_ALERT(adap, 234 "FW assertion at %.16s:%u, val0 %#x, val1 %#x\n", 235 asrt->u.assert.filename_0_7, 236 be32_to_cpu(asrt->u.assert.line), 237 be32_to_cpu(asrt->u.assert.x), 238 be32_to_cpu(asrt->u.assert.y)); 239 } 240 241 struct port_tx_state { 242 uint64_t rx_pause; 243 uint64_t tx_frames; 244 }; 245 246 u32 247 t4_port_reg(struct adapter *adap, u8 port, u32 reg) 248 { 249 if (chip_id(adap) > CHELSIO_T4) 250 return T5_PORT_REG(port, reg); 251 return PORT_REG(port, reg); 252 } 253 254 static void 255 read_tx_state_one(struct adapter *sc, int i, struct port_tx_state *tx_state) 256 { 257 uint32_t rx_pause_reg, tx_frames_reg; 258 259 rx_pause_reg = t4_port_reg(sc, i, A_MPS_PORT_STAT_RX_PORT_PAUSE_L); 260 tx_frames_reg = t4_port_reg(sc, i, A_MPS_PORT_STAT_TX_PORT_FRAMES_L); 261 262 tx_state->rx_pause = t4_read_reg64(sc, rx_pause_reg); 263 tx_state->tx_frames = t4_read_reg64(sc, tx_frames_reg); 264 } 265 266 static void 267 read_tx_state(struct adapter *sc, struct port_tx_state *tx_state) 268 { 269 int i; 270 271 for_each_port(sc, i) 272 read_tx_state_one(sc, i, &tx_state[i]); 273 } 274 275 static void 276 check_tx_state(struct adapter *sc, struct port_tx_state *tx_state) 277 { 278 uint32_t port_ctl_reg; 279 uint64_t tx_frames, rx_pause; 280 int i; 281 282 for_each_port(sc, i) { 283 rx_pause = tx_state[i].rx_pause; 284 tx_frames = tx_state[i].tx_frames; 285 read_tx_state_one(sc, i, &tx_state[i]); /* update */ 286 287 port_ctl_reg = t4_port_reg(sc, i, A_MPS_PORT_CTL); 288 if (t4_read_reg(sc, port_ctl_reg) & F_PORTTXEN && 289 rx_pause != tx_state[i].rx_pause && 290 tx_frames == tx_state[i].tx_frames) { 291 t4_set_reg_field(sc, port_ctl_reg, F_PORTTXEN, 0); 292 mdelay(1); 293 t4_set_reg_field(sc, port_ctl_reg, F_PORTTXEN, F_PORTTXEN); 294 } 295 } 296 } 297 298 #define X_CIM_PF_NOACCESS 0xeeeeeeee 299 /** 300 * t4_wr_mbox_meat_timeout - send a command to FW through the given mailbox 301 * @adap: the adapter 302 * @mbox: index of the mailbox to use 303 * @cmd: the command to write 304 * @size: command length in bytes 305 * @rpl: where to optionally store the reply 306 * @sleep_ok: if true we may sleep while awaiting command completion 307 * @timeout: time to wait for command to finish before timing out 308 * (negative implies @sleep_ok=false) 309 * 310 * Sends the given command to FW through the selected mailbox and waits 311 * for the FW to execute the command. If @rpl is not %NULL it is used to 312 * store the FW's reply to the command. The command and its optional 313 * reply are of the same length. Some FW commands like RESET and 314 * INITIALIZE can take a considerable amount of time to execute. 315 * @sleep_ok determines whether we may sleep while awaiting the response. 316 * If sleeping is allowed we use progressive backoff otherwise we spin. 317 * Note that passing in a negative @timeout is an alternate mechanism 318 * for specifying @sleep_ok=false. This is useful when a higher level 319 * interface allows for specification of @timeout but not @sleep_ok ... 320 * 321 * The return value is 0 on success or a negative errno on failure. A 322 * failure can happen either because we are not able to execute the 323 * command or FW executes it but signals an error. In the latter case 324 * the return value is the error code indicated by FW (negated). 325 */ 326 int t4_wr_mbox_meat_timeout(struct adapter *adap, int mbox, const void *cmd, 327 int size, void *rpl, bool sleep_ok, int timeout) 328 { 329 /* 330 * We delay in small increments at first in an effort to maintain 331 * responsiveness for simple, fast executing commands but then back 332 * off to larger delays to a maximum retry delay. 333 */ 334 static const int delay[] = { 335 1, 1, 3, 5, 10, 10, 20, 50, 100 336 }; 337 u32 v; 338 u64 res; 339 int i, ms, delay_idx, ret, next_tx_check; 340 u32 data_reg = PF_REG(mbox, A_CIM_PF_MAILBOX_DATA); 341 u32 ctl_reg = PF_REG(mbox, A_CIM_PF_MAILBOX_CTRL); 342 u32 ctl; 343 __be64 cmd_rpl[MBOX_LEN/8]; 344 u32 pcie_fw; 345 struct port_tx_state tx_state[MAX_NPORTS]; 346 347 if (adap->flags & CHK_MBOX_ACCESS) 348 ASSERT_SYNCHRONIZED_OP(adap); 349 350 if (size <= 0 || (size & 15) || size > MBOX_LEN) 351 return -EINVAL; 352 353 if (adap->flags & IS_VF) { 354 if (is_t6(adap)) 355 data_reg = FW_T6VF_MBDATA_BASE_ADDR; 356 else 357 data_reg = FW_T4VF_MBDATA_BASE_ADDR; 358 ctl_reg = VF_CIM_REG(A_CIM_VF_EXT_MAILBOX_CTRL); 359 } 360 361 /* 362 * If we have a negative timeout, that implies that we can't sleep. 363 */ 364 if (timeout < 0) { 365 sleep_ok = false; 366 timeout = -timeout; 367 } 368 369 /* 370 * Attempt to gain access to the mailbox. 371 */ 372 pcie_fw = 0; 373 if (!(adap->flags & IS_VF)) { 374 pcie_fw = t4_read_reg(adap, A_PCIE_FW); 375 if (pcie_fw & F_PCIE_FW_ERR) 376 goto failed; 377 } 378 for (i = 0; i < 4; i++) { 379 ctl = t4_read_reg(adap, ctl_reg); 380 v = G_MBOWNER(ctl); 381 if (v != X_MBOWNER_NONE) 382 break; 383 } 384 385 /* 386 * If we were unable to gain access, report the error to our caller. 387 */ 388 if (v != X_MBOWNER_PL) { 389 if (!(adap->flags & IS_VF)) { 390 pcie_fw = t4_read_reg(adap, A_PCIE_FW); 391 if (pcie_fw & F_PCIE_FW_ERR) 392 goto failed; 393 } 394 ret = (v == X_MBOWNER_FW) ? -EBUSY : -ETIMEDOUT; 395 return ret; 396 } 397 398 /* 399 * If we gain ownership of the mailbox and there's a "valid" message 400 * in it, this is likely an asynchronous error message from the 401 * firmware. So we'll report that and then proceed on with attempting 402 * to issue our own command ... which may well fail if the error 403 * presaged the firmware crashing ... 404 */ 405 if (ctl & F_MBMSGVALID) { 406 CH_DUMP_MBOX(adap, mbox, data_reg, "VLD", NULL, true); 407 } 408 409 /* 410 * Copy in the new mailbox command and send it on its way ... 411 */ 412 memset(cmd_rpl, 0, sizeof(cmd_rpl)); 413 memcpy(cmd_rpl, cmd, size); 414 CH_DUMP_MBOX(adap, mbox, 0, "cmd", cmd_rpl, false); 415 for (i = 0; i < ARRAY_SIZE(cmd_rpl); i++) 416 t4_write_reg64(adap, data_reg + i * 8, be64_to_cpu(cmd_rpl[i])); 417 418 if (adap->flags & IS_VF) { 419 /* 420 * For the VFs, the Mailbox Data "registers" are 421 * actually backed by T4's "MA" interface rather than 422 * PL Registers (as is the case for the PFs). Because 423 * these are in different coherency domains, the write 424 * to the VF's PL-register-backed Mailbox Control can 425 * race in front of the writes to the MA-backed VF 426 * Mailbox Data "registers". So we need to do a 427 * read-back on at least one byte of the VF Mailbox 428 * Data registers before doing the write to the VF 429 * Mailbox Control register. 430 */ 431 t4_read_reg(adap, data_reg); 432 } 433 434 t4_write_reg(adap, ctl_reg, F_MBMSGVALID | V_MBOWNER(X_MBOWNER_FW)); 435 read_tx_state(adap, &tx_state[0]); /* also flushes the write_reg */ 436 next_tx_check = 1000; 437 delay_idx = 0; 438 ms = delay[0]; 439 440 /* 441 * Loop waiting for the reply; bail out if we time out or the firmware 442 * reports an error. 443 */ 444 for (i = 0; i < timeout; i += ms) { 445 if (!(adap->flags & IS_VF)) { 446 pcie_fw = t4_read_reg(adap, A_PCIE_FW); 447 if (pcie_fw & F_PCIE_FW_ERR) 448 break; 449 } 450 451 if (i >= next_tx_check) { 452 check_tx_state(adap, &tx_state[0]); 453 next_tx_check = i + 1000; 454 } 455 456 if (sleep_ok) { 457 ms = delay[delay_idx]; /* last element may repeat */ 458 if (delay_idx < ARRAY_SIZE(delay) - 1) 459 delay_idx++; 460 msleep(ms); 461 } else { 462 mdelay(ms); 463 } 464 465 v = t4_read_reg(adap, ctl_reg); 466 if (v == X_CIM_PF_NOACCESS) 467 continue; 468 if (G_MBOWNER(v) == X_MBOWNER_PL) { 469 if (!(v & F_MBMSGVALID)) { 470 t4_write_reg(adap, ctl_reg, 471 V_MBOWNER(X_MBOWNER_NONE)); 472 continue; 473 } 474 475 /* 476 * Retrieve the command reply and release the mailbox. 477 */ 478 get_mbox_rpl(adap, cmd_rpl, MBOX_LEN/8, data_reg); 479 CH_DUMP_MBOX(adap, mbox, 0, "rpl", cmd_rpl, false); 480 t4_write_reg(adap, ctl_reg, V_MBOWNER(X_MBOWNER_NONE)); 481 482 res = be64_to_cpu(cmd_rpl[0]); 483 if (G_FW_CMD_OP(res >> 32) == FW_DEBUG_CMD) { 484 fw_asrt(adap, (struct fw_debug_cmd *)cmd_rpl); 485 res = V_FW_CMD_RETVAL(EIO); 486 } else if (rpl) 487 memcpy(rpl, cmd_rpl, size); 488 return -G_FW_CMD_RETVAL((int)res); 489 } 490 } 491 492 /* 493 * We timed out waiting for a reply to our mailbox command. Report 494 * the error and also check to see if the firmware reported any 495 * errors ... 496 */ 497 CH_ERR(adap, "command %#x in mbox %d timed out (0x%08x).\n", 498 *(const u8 *)cmd, mbox, pcie_fw); 499 CH_DUMP_MBOX(adap, mbox, 0, "cmdsent", cmd_rpl, true); 500 CH_DUMP_MBOX(adap, mbox, data_reg, "current", NULL, true); 501 failed: 502 adap->flags &= ~FW_OK; 503 ret = pcie_fw & F_PCIE_FW_ERR ? -ENXIO : -ETIMEDOUT; 504 t4_fatal_err(adap, true); 505 return ret; 506 } 507 508 int t4_wr_mbox_meat(struct adapter *adap, int mbox, const void *cmd, int size, 509 void *rpl, bool sleep_ok) 510 { 511 return t4_wr_mbox_meat_timeout(adap, mbox, cmd, size, rpl, 512 sleep_ok, FW_CMD_MAX_TIMEOUT); 513 514 } 515 516 static int t4_edc_err_read(struct adapter *adap, int idx) 517 { 518 u32 edc_ecc_err_addr_reg; 519 u32 edc_bist_status_rdata_reg; 520 521 if (is_t4(adap)) { 522 CH_WARN(adap, "%s: T4 NOT supported.\n", __func__); 523 return 0; 524 } 525 if (idx != MEM_EDC0 && idx != MEM_EDC1) { 526 CH_WARN(adap, "%s: idx %d NOT supported.\n", __func__, idx); 527 return 0; 528 } 529 530 edc_ecc_err_addr_reg = EDC_T5_REG(A_EDC_H_ECC_ERR_ADDR, idx); 531 edc_bist_status_rdata_reg = EDC_T5_REG(A_EDC_H_BIST_STATUS_RDATA, idx); 532 533 CH_WARN(adap, 534 "edc%d err addr 0x%x: 0x%x.\n", 535 idx, edc_ecc_err_addr_reg, 536 t4_read_reg(adap, edc_ecc_err_addr_reg)); 537 CH_WARN(adap, 538 "bist: 0x%x, status %llx %llx %llx %llx %llx %llx %llx %llx %llx.\n", 539 edc_bist_status_rdata_reg, 540 (unsigned long long)t4_read_reg64(adap, edc_bist_status_rdata_reg), 541 (unsigned long long)t4_read_reg64(adap, edc_bist_status_rdata_reg + 8), 542 (unsigned long long)t4_read_reg64(adap, edc_bist_status_rdata_reg + 16), 543 (unsigned long long)t4_read_reg64(adap, edc_bist_status_rdata_reg + 24), 544 (unsigned long long)t4_read_reg64(adap, edc_bist_status_rdata_reg + 32), 545 (unsigned long long)t4_read_reg64(adap, edc_bist_status_rdata_reg + 40), 546 (unsigned long long)t4_read_reg64(adap, edc_bist_status_rdata_reg + 48), 547 (unsigned long long)t4_read_reg64(adap, edc_bist_status_rdata_reg + 56), 548 (unsigned long long)t4_read_reg64(adap, edc_bist_status_rdata_reg + 64)); 549 550 return 0; 551 } 552 553 /** 554 * t4_mc_read - read from MC through backdoor accesses 555 * @adap: the adapter 556 * @idx: which MC to access 557 * @addr: address of first byte requested 558 * @data: 64 bytes of data containing the requested address 559 * @ecc: where to store the corresponding 64-bit ECC word 560 * 561 * Read 64 bytes of data from MC starting at a 64-byte-aligned address 562 * that covers the requested address @addr. If @parity is not %NULL it 563 * is assigned the 64-bit ECC word for the read data. 564 */ 565 int t4_mc_read(struct adapter *adap, int idx, u32 addr, __be32 *data, u64 *ecc) 566 { 567 int i; 568 u32 mc_bist_cmd_reg, mc_bist_cmd_addr_reg, mc_bist_cmd_len_reg; 569 u32 mc_bist_status_rdata_reg, mc_bist_data_pattern_reg; 570 571 if (is_t4(adap)) { 572 mc_bist_cmd_reg = A_MC_BIST_CMD; 573 mc_bist_cmd_addr_reg = A_MC_BIST_CMD_ADDR; 574 mc_bist_cmd_len_reg = A_MC_BIST_CMD_LEN; 575 mc_bist_status_rdata_reg = A_MC_BIST_STATUS_RDATA; 576 mc_bist_data_pattern_reg = A_MC_BIST_DATA_PATTERN; 577 } else { 578 mc_bist_cmd_reg = MC_REG(A_MC_P_BIST_CMD, idx); 579 mc_bist_cmd_addr_reg = MC_REG(A_MC_P_BIST_CMD_ADDR, idx); 580 mc_bist_cmd_len_reg = MC_REG(A_MC_P_BIST_CMD_LEN, idx); 581 mc_bist_status_rdata_reg = MC_REG(A_MC_P_BIST_STATUS_RDATA, 582 idx); 583 mc_bist_data_pattern_reg = MC_REG(A_MC_P_BIST_DATA_PATTERN, 584 idx); 585 } 586 587 if (t4_read_reg(adap, mc_bist_cmd_reg) & F_START_BIST) 588 return -EBUSY; 589 t4_write_reg(adap, mc_bist_cmd_addr_reg, addr & ~0x3fU); 590 t4_write_reg(adap, mc_bist_cmd_len_reg, 64); 591 t4_write_reg(adap, mc_bist_data_pattern_reg, 0xc); 592 t4_write_reg(adap, mc_bist_cmd_reg, V_BIST_OPCODE(1) | 593 F_START_BIST | V_BIST_CMD_GAP(1)); 594 i = t4_wait_op_done(adap, mc_bist_cmd_reg, F_START_BIST, 0, 10, 1); 595 if (i) 596 return i; 597 598 #define MC_DATA(i) MC_BIST_STATUS_REG(mc_bist_status_rdata_reg, i) 599 600 for (i = 15; i >= 0; i--) 601 *data++ = ntohl(t4_read_reg(adap, MC_DATA(i))); 602 if (ecc) 603 *ecc = t4_read_reg64(adap, MC_DATA(16)); 604 #undef MC_DATA 605 return 0; 606 } 607 608 /** 609 * t4_edc_read - read from EDC through backdoor accesses 610 * @adap: the adapter 611 * @idx: which EDC to access 612 * @addr: address of first byte requested 613 * @data: 64 bytes of data containing the requested address 614 * @ecc: where to store the corresponding 64-bit ECC word 615 * 616 * Read 64 bytes of data from EDC starting at a 64-byte-aligned address 617 * that covers the requested address @addr. If @parity is not %NULL it 618 * is assigned the 64-bit ECC word for the read data. 619 */ 620 int t4_edc_read(struct adapter *adap, int idx, u32 addr, __be32 *data, u64 *ecc) 621 { 622 int i; 623 u32 edc_bist_cmd_reg, edc_bist_cmd_addr_reg, edc_bist_cmd_len_reg; 624 u32 edc_bist_cmd_data_pattern, edc_bist_status_rdata_reg; 625 626 if (is_t4(adap)) { 627 edc_bist_cmd_reg = EDC_REG(A_EDC_BIST_CMD, idx); 628 edc_bist_cmd_addr_reg = EDC_REG(A_EDC_BIST_CMD_ADDR, idx); 629 edc_bist_cmd_len_reg = EDC_REG(A_EDC_BIST_CMD_LEN, idx); 630 edc_bist_cmd_data_pattern = EDC_REG(A_EDC_BIST_DATA_PATTERN, 631 idx); 632 edc_bist_status_rdata_reg = EDC_REG(A_EDC_BIST_STATUS_RDATA, 633 idx); 634 } else { 635 /* 636 * These macro are missing in t4_regs.h file. 637 * Added temporarily for testing. 638 */ 639 #define EDC_STRIDE_T5 (EDC_T51_BASE_ADDR - EDC_T50_BASE_ADDR) 640 #define EDC_REG_T5(reg, idx) (reg + EDC_STRIDE_T5 * idx) 641 edc_bist_cmd_reg = EDC_REG_T5(A_EDC_H_BIST_CMD, idx); 642 edc_bist_cmd_addr_reg = EDC_REG_T5(A_EDC_H_BIST_CMD_ADDR, idx); 643 edc_bist_cmd_len_reg = EDC_REG_T5(A_EDC_H_BIST_CMD_LEN, idx); 644 edc_bist_cmd_data_pattern = EDC_REG_T5(A_EDC_H_BIST_DATA_PATTERN, 645 idx); 646 edc_bist_status_rdata_reg = EDC_REG_T5(A_EDC_H_BIST_STATUS_RDATA, 647 idx); 648 #undef EDC_REG_T5 649 #undef EDC_STRIDE_T5 650 } 651 652 if (t4_read_reg(adap, edc_bist_cmd_reg) & F_START_BIST) 653 return -EBUSY; 654 t4_write_reg(adap, edc_bist_cmd_addr_reg, addr & ~0x3fU); 655 t4_write_reg(adap, edc_bist_cmd_len_reg, 64); 656 t4_write_reg(adap, edc_bist_cmd_data_pattern, 0xc); 657 t4_write_reg(adap, edc_bist_cmd_reg, 658 V_BIST_OPCODE(1) | V_BIST_CMD_GAP(1) | F_START_BIST); 659 i = t4_wait_op_done(adap, edc_bist_cmd_reg, F_START_BIST, 0, 10, 1); 660 if (i) 661 return i; 662 663 #define EDC_DATA(i) EDC_BIST_STATUS_REG(edc_bist_status_rdata_reg, i) 664 665 for (i = 15; i >= 0; i--) 666 *data++ = ntohl(t4_read_reg(adap, EDC_DATA(i))); 667 if (ecc) 668 *ecc = t4_read_reg64(adap, EDC_DATA(16)); 669 #undef EDC_DATA 670 return 0; 671 } 672 673 /** 674 * t4_mem_read - read EDC 0, EDC 1 or MC into buffer 675 * @adap: the adapter 676 * @mtype: memory type: MEM_EDC0, MEM_EDC1 or MEM_MC 677 * @addr: address within indicated memory type 678 * @len: amount of memory to read 679 * @buf: host memory buffer 680 * 681 * Reads an [almost] arbitrary memory region in the firmware: the 682 * firmware memory address, length and host buffer must be aligned on 683 * 32-bit boudaries. The memory is returned as a raw byte sequence from 684 * the firmware's memory. If this memory contains data structures which 685 * contain multi-byte integers, it's the callers responsibility to 686 * perform appropriate byte order conversions. 687 */ 688 int t4_mem_read(struct adapter *adap, int mtype, u32 addr, u32 len, 689 __be32 *buf) 690 { 691 u32 pos, start, end, offset; 692 int ret; 693 694 /* 695 * Argument sanity checks ... 696 */ 697 if ((addr & 0x3) || (len & 0x3)) 698 return -EINVAL; 699 700 /* 701 * The underlaying EDC/MC read routines read 64 bytes at a time so we 702 * need to round down the start and round up the end. We'll start 703 * copying out of the first line at (addr - start) a word at a time. 704 */ 705 start = rounddown2(addr, 64); 706 end = roundup2(addr + len, 64); 707 offset = (addr - start)/sizeof(__be32); 708 709 for (pos = start; pos < end; pos += 64, offset = 0) { 710 __be32 data[16]; 711 712 /* 713 * Read the chip's memory block and bail if there's an error. 714 */ 715 if ((mtype == MEM_MC) || (mtype == MEM_MC1)) 716 ret = t4_mc_read(adap, mtype - MEM_MC, pos, data, NULL); 717 else 718 ret = t4_edc_read(adap, mtype, pos, data, NULL); 719 if (ret) 720 return ret; 721 722 /* 723 * Copy the data into the caller's memory buffer. 724 */ 725 while (offset < 16 && len > 0) { 726 *buf++ = data[offset++]; 727 len -= sizeof(__be32); 728 } 729 } 730 731 return 0; 732 } 733 734 /* 735 * Return the specified PCI-E Configuration Space register from our Physical 736 * Function. We try first via a Firmware LDST Command (if fw_attach != 0) 737 * since we prefer to let the firmware own all of these registers, but if that 738 * fails we go for it directly ourselves. 739 */ 740 u32 t4_read_pcie_cfg4(struct adapter *adap, int reg, int drv_fw_attach) 741 { 742 743 /* 744 * If fw_attach != 0, construct and send the Firmware LDST Command to 745 * retrieve the specified PCI-E Configuration Space register. 746 */ 747 if (drv_fw_attach != 0) { 748 struct fw_ldst_cmd ldst_cmd; 749 int ret; 750 751 memset(&ldst_cmd, 0, sizeof(ldst_cmd)); 752 ldst_cmd.op_to_addrspace = 753 cpu_to_be32(V_FW_CMD_OP(FW_LDST_CMD) | 754 F_FW_CMD_REQUEST | 755 F_FW_CMD_READ | 756 V_FW_LDST_CMD_ADDRSPACE(FW_LDST_ADDRSPC_FUNC_PCIE)); 757 ldst_cmd.cycles_to_len16 = cpu_to_be32(FW_LEN16(ldst_cmd)); 758 ldst_cmd.u.pcie.select_naccess = V_FW_LDST_CMD_NACCESS(1); 759 ldst_cmd.u.pcie.ctrl_to_fn = 760 (F_FW_LDST_CMD_LC | V_FW_LDST_CMD_FN(adap->pf)); 761 ldst_cmd.u.pcie.r = reg; 762 763 /* 764 * If the LDST Command succeeds, return the result, otherwise 765 * fall through to reading it directly ourselves ... 766 */ 767 ret = t4_wr_mbox(adap, adap->mbox, &ldst_cmd, sizeof(ldst_cmd), 768 &ldst_cmd); 769 if (ret == 0) 770 return be32_to_cpu(ldst_cmd.u.pcie.data[0]); 771 772 CH_WARN(adap, "Firmware failed to return " 773 "Configuration Space register %d, err = %d\n", 774 reg, -ret); 775 } 776 777 /* 778 * Read the desired Configuration Space register via the PCI-E 779 * Backdoor mechanism. 780 */ 781 return t4_hw_pci_read_cfg4(adap, reg); 782 } 783 784 /** 785 * t4_get_regs_len - return the size of the chips register set 786 * @adapter: the adapter 787 * 788 * Returns the size of the chip's BAR0 register space. 789 */ 790 unsigned int t4_get_regs_len(struct adapter *adapter) 791 { 792 unsigned int chip_version = chip_id(adapter); 793 794 switch (chip_version) { 795 case CHELSIO_T4: 796 if (adapter->flags & IS_VF) 797 return FW_T4VF_REGMAP_SIZE; 798 return T4_REGMAP_SIZE; 799 800 case CHELSIO_T5: 801 case CHELSIO_T6: 802 if (adapter->flags & IS_VF) 803 return FW_T4VF_REGMAP_SIZE; 804 return T5_REGMAP_SIZE; 805 } 806 807 CH_ERR(adapter, 808 "Unsupported chip version %d\n", chip_version); 809 return 0; 810 } 811 812 /** 813 * t4_get_regs - read chip registers into provided buffer 814 * @adap: the adapter 815 * @buf: register buffer 816 * @buf_size: size (in bytes) of register buffer 817 * 818 * If the provided register buffer isn't large enough for the chip's 819 * full register range, the register dump will be truncated to the 820 * register buffer's size. 821 */ 822 void t4_get_regs(struct adapter *adap, u8 *buf, size_t buf_size) 823 { 824 static const unsigned int t4_reg_ranges[] = { 825 0x1008, 0x1108, 826 0x1180, 0x1184, 827 0x1190, 0x1194, 828 0x11a0, 0x11a4, 829 0x11b0, 0x11b4, 830 0x11fc, 0x123c, 831 0x1300, 0x173c, 832 0x1800, 0x18fc, 833 0x3000, 0x30d8, 834 0x30e0, 0x30e4, 835 0x30ec, 0x5910, 836 0x5920, 0x5924, 837 0x5960, 0x5960, 838 0x5968, 0x5968, 839 0x5970, 0x5970, 840 0x5978, 0x5978, 841 0x5980, 0x5980, 842 0x5988, 0x5988, 843 0x5990, 0x5990, 844 0x5998, 0x5998, 845 0x59a0, 0x59d4, 846 0x5a00, 0x5ae0, 847 0x5ae8, 0x5ae8, 848 0x5af0, 0x5af0, 849 0x5af8, 0x5af8, 850 0x6000, 0x6098, 851 0x6100, 0x6150, 852 0x6200, 0x6208, 853 0x6240, 0x6248, 854 0x6280, 0x62b0, 855 0x62c0, 0x6338, 856 0x6370, 0x638c, 857 0x6400, 0x643c, 858 0x6500, 0x6524, 859 0x6a00, 0x6a04, 860 0x6a14, 0x6a38, 861 0x6a60, 0x6a70, 862 0x6a78, 0x6a78, 863 0x6b00, 0x6b0c, 864 0x6b1c, 0x6b84, 865 0x6bf0, 0x6bf8, 866 0x6c00, 0x6c0c, 867 0x6c1c, 0x6c84, 868 0x6cf0, 0x6cf8, 869 0x6d00, 0x6d0c, 870 0x6d1c, 0x6d84, 871 0x6df0, 0x6df8, 872 0x6e00, 0x6e0c, 873 0x6e1c, 0x6e84, 874 0x6ef0, 0x6ef8, 875 0x6f00, 0x6f0c, 876 0x6f1c, 0x6f84, 877 0x6ff0, 0x6ff8, 878 0x7000, 0x700c, 879 0x701c, 0x7084, 880 0x70f0, 0x70f8, 881 0x7100, 0x710c, 882 0x711c, 0x7184, 883 0x71f0, 0x71f8, 884 0x7200, 0x720c, 885 0x721c, 0x7284, 886 0x72f0, 0x72f8, 887 0x7300, 0x730c, 888 0x731c, 0x7384, 889 0x73f0, 0x73f8, 890 0x7400, 0x7450, 891 0x7500, 0x7530, 892 0x7600, 0x760c, 893 0x7614, 0x761c, 894 0x7680, 0x76cc, 895 0x7700, 0x7798, 896 0x77c0, 0x77fc, 897 0x7900, 0x79fc, 898 0x7b00, 0x7b58, 899 0x7b60, 0x7b84, 900 0x7b8c, 0x7c38, 901 0x7d00, 0x7d38, 902 0x7d40, 0x7d80, 903 0x7d8c, 0x7ddc, 904 0x7de4, 0x7e04, 905 0x7e10, 0x7e1c, 906 0x7e24, 0x7e38, 907 0x7e40, 0x7e44, 908 0x7e4c, 0x7e78, 909 0x7e80, 0x7ea4, 910 0x7eac, 0x7edc, 911 0x7ee8, 0x7efc, 912 0x8dc0, 0x8e04, 913 0x8e10, 0x8e1c, 914 0x8e30, 0x8e78, 915 0x8ea0, 0x8eb8, 916 0x8ec0, 0x8f6c, 917 0x8fc0, 0x9008, 918 0x9010, 0x9058, 919 0x9060, 0x9060, 920 0x9068, 0x9074, 921 0x90fc, 0x90fc, 922 0x9400, 0x9408, 923 0x9410, 0x9458, 924 0x9600, 0x9600, 925 0x9608, 0x9638, 926 0x9640, 0x96bc, 927 0x9800, 0x9808, 928 0x9820, 0x983c, 929 0x9850, 0x9864, 930 0x9c00, 0x9c6c, 931 0x9c80, 0x9cec, 932 0x9d00, 0x9d6c, 933 0x9d80, 0x9dec, 934 0x9e00, 0x9e6c, 935 0x9e80, 0x9eec, 936 0x9f00, 0x9f6c, 937 0x9f80, 0x9fec, 938 0xd004, 0xd004, 939 0xd010, 0xd03c, 940 0xdfc0, 0xdfe0, 941 0xe000, 0xea7c, 942 0xf000, 0x11110, 943 0x11118, 0x11190, 944 0x19040, 0x1906c, 945 0x19078, 0x19080, 946 0x1908c, 0x190e4, 947 0x190f0, 0x190f8, 948 0x19100, 0x19110, 949 0x19120, 0x19124, 950 0x19150, 0x19194, 951 0x1919c, 0x191b0, 952 0x191d0, 0x191e8, 953 0x19238, 0x1924c, 954 0x193f8, 0x1943c, 955 0x1944c, 0x19474, 956 0x19490, 0x194e0, 957 0x194f0, 0x194f8, 958 0x19800, 0x19c08, 959 0x19c10, 0x19c90, 960 0x19ca0, 0x19ce4, 961 0x19cf0, 0x19d40, 962 0x19d50, 0x19d94, 963 0x19da0, 0x19de8, 964 0x19df0, 0x19e40, 965 0x19e50, 0x19e90, 966 0x19ea0, 0x19f4c, 967 0x1a000, 0x1a004, 968 0x1a010, 0x1a06c, 969 0x1a0b0, 0x1a0e4, 970 0x1a0ec, 0x1a0f4, 971 0x1a100, 0x1a108, 972 0x1a114, 0x1a120, 973 0x1a128, 0x1a130, 974 0x1a138, 0x1a138, 975 0x1a190, 0x1a1c4, 976 0x1a1fc, 0x1a1fc, 977 0x1e040, 0x1e04c, 978 0x1e284, 0x1e28c, 979 0x1e2c0, 0x1e2c0, 980 0x1e2e0, 0x1e2e0, 981 0x1e300, 0x1e384, 982 0x1e3c0, 0x1e3c8, 983 0x1e440, 0x1e44c, 984 0x1e684, 0x1e68c, 985 0x1e6c0, 0x1e6c0, 986 0x1e6e0, 0x1e6e0, 987 0x1e700, 0x1e784, 988 0x1e7c0, 0x1e7c8, 989 0x1e840, 0x1e84c, 990 0x1ea84, 0x1ea8c, 991 0x1eac0, 0x1eac0, 992 0x1eae0, 0x1eae0, 993 0x1eb00, 0x1eb84, 994 0x1ebc0, 0x1ebc8, 995 0x1ec40, 0x1ec4c, 996 0x1ee84, 0x1ee8c, 997 0x1eec0, 0x1eec0, 998 0x1eee0, 0x1eee0, 999 0x1ef00, 0x1ef84, 1000 0x1efc0, 0x1efc8, 1001 0x1f040, 0x1f04c, 1002 0x1f284, 0x1f28c, 1003 0x1f2c0, 0x1f2c0, 1004 0x1f2e0, 0x1f2e0, 1005 0x1f300, 0x1f384, 1006 0x1f3c0, 0x1f3c8, 1007 0x1f440, 0x1f44c, 1008 0x1f684, 0x1f68c, 1009 0x1f6c0, 0x1f6c0, 1010 0x1f6e0, 0x1f6e0, 1011 0x1f700, 0x1f784, 1012 0x1f7c0, 0x1f7c8, 1013 0x1f840, 0x1f84c, 1014 0x1fa84, 0x1fa8c, 1015 0x1fac0, 0x1fac0, 1016 0x1fae0, 0x1fae0, 1017 0x1fb00, 0x1fb84, 1018 0x1fbc0, 0x1fbc8, 1019 0x1fc40, 0x1fc4c, 1020 0x1fe84, 0x1fe8c, 1021 0x1fec0, 0x1fec0, 1022 0x1fee0, 0x1fee0, 1023 0x1ff00, 0x1ff84, 1024 0x1ffc0, 0x1ffc8, 1025 0x20000, 0x2002c, 1026 0x20100, 0x2013c, 1027 0x20190, 0x201a0, 1028 0x201a8, 0x201b8, 1029 0x201c4, 0x201c8, 1030 0x20200, 0x20318, 1031 0x20400, 0x204b4, 1032 0x204c0, 0x20528, 1033 0x20540, 0x20614, 1034 0x21000, 0x21040, 1035 0x2104c, 0x21060, 1036 0x210c0, 0x210ec, 1037 0x21200, 0x21268, 1038 0x21270, 0x21284, 1039 0x212fc, 0x21388, 1040 0x21400, 0x21404, 1041 0x21500, 0x21500, 1042 0x21510, 0x21518, 1043 0x2152c, 0x21530, 1044 0x2153c, 0x2153c, 1045 0x21550, 0x21554, 1046 0x21600, 0x21600, 1047 0x21608, 0x2161c, 1048 0x21624, 0x21628, 1049 0x21630, 0x21634, 1050 0x2163c, 0x2163c, 1051 0x21700, 0x2171c, 1052 0x21780, 0x2178c, 1053 0x21800, 0x21818, 1054 0x21820, 0x21828, 1055 0x21830, 0x21848, 1056 0x21850, 0x21854, 1057 0x21860, 0x21868, 1058 0x21870, 0x21870, 1059 0x21878, 0x21898, 1060 0x218a0, 0x218a8, 1061 0x218b0, 0x218c8, 1062 0x218d0, 0x218d4, 1063 0x218e0, 0x218e8, 1064 0x218f0, 0x218f0, 1065 0x218f8, 0x21a18, 1066 0x21a20, 0x21a28, 1067 0x21a30, 0x21a48, 1068 0x21a50, 0x21a54, 1069 0x21a60, 0x21a68, 1070 0x21a70, 0x21a70, 1071 0x21a78, 0x21a98, 1072 0x21aa0, 0x21aa8, 1073 0x21ab0, 0x21ac8, 1074 0x21ad0, 0x21ad4, 1075 0x21ae0, 0x21ae8, 1076 0x21af0, 0x21af0, 1077 0x21af8, 0x21c18, 1078 0x21c20, 0x21c20, 1079 0x21c28, 0x21c30, 1080 0x21c38, 0x21c38, 1081 0x21c80, 0x21c98, 1082 0x21ca0, 0x21ca8, 1083 0x21cb0, 0x21cc8, 1084 0x21cd0, 0x21cd4, 1085 0x21ce0, 0x21ce8, 1086 0x21cf0, 0x21cf0, 1087 0x21cf8, 0x21d7c, 1088 0x21e00, 0x21e04, 1089 0x22000, 0x2202c, 1090 0x22100, 0x2213c, 1091 0x22190, 0x221a0, 1092 0x221a8, 0x221b8, 1093 0x221c4, 0x221c8, 1094 0x22200, 0x22318, 1095 0x22400, 0x224b4, 1096 0x224c0, 0x22528, 1097 0x22540, 0x22614, 1098 0x23000, 0x23040, 1099 0x2304c, 0x23060, 1100 0x230c0, 0x230ec, 1101 0x23200, 0x23268, 1102 0x23270, 0x23284, 1103 0x232fc, 0x23388, 1104 0x23400, 0x23404, 1105 0x23500, 0x23500, 1106 0x23510, 0x23518, 1107 0x2352c, 0x23530, 1108 0x2353c, 0x2353c, 1109 0x23550, 0x23554, 1110 0x23600, 0x23600, 1111 0x23608, 0x2361c, 1112 0x23624, 0x23628, 1113 0x23630, 0x23634, 1114 0x2363c, 0x2363c, 1115 0x23700, 0x2371c, 1116 0x23780, 0x2378c, 1117 0x23800, 0x23818, 1118 0x23820, 0x23828, 1119 0x23830, 0x23848, 1120 0x23850, 0x23854, 1121 0x23860, 0x23868, 1122 0x23870, 0x23870, 1123 0x23878, 0x23898, 1124 0x238a0, 0x238a8, 1125 0x238b0, 0x238c8, 1126 0x238d0, 0x238d4, 1127 0x238e0, 0x238e8, 1128 0x238f0, 0x238f0, 1129 0x238f8, 0x23a18, 1130 0x23a20, 0x23a28, 1131 0x23a30, 0x23a48, 1132 0x23a50, 0x23a54, 1133 0x23a60, 0x23a68, 1134 0x23a70, 0x23a70, 1135 0x23a78, 0x23a98, 1136 0x23aa0, 0x23aa8, 1137 0x23ab0, 0x23ac8, 1138 0x23ad0, 0x23ad4, 1139 0x23ae0, 0x23ae8, 1140 0x23af0, 0x23af0, 1141 0x23af8, 0x23c18, 1142 0x23c20, 0x23c20, 1143 0x23c28, 0x23c30, 1144 0x23c38, 0x23c38, 1145 0x23c80, 0x23c98, 1146 0x23ca0, 0x23ca8, 1147 0x23cb0, 0x23cc8, 1148 0x23cd0, 0x23cd4, 1149 0x23ce0, 0x23ce8, 1150 0x23cf0, 0x23cf0, 1151 0x23cf8, 0x23d7c, 1152 0x23e00, 0x23e04, 1153 0x24000, 0x2402c, 1154 0x24100, 0x2413c, 1155 0x24190, 0x241a0, 1156 0x241a8, 0x241b8, 1157 0x241c4, 0x241c8, 1158 0x24200, 0x24318, 1159 0x24400, 0x244b4, 1160 0x244c0, 0x24528, 1161 0x24540, 0x24614, 1162 0x25000, 0x25040, 1163 0x2504c, 0x25060, 1164 0x250c0, 0x250ec, 1165 0x25200, 0x25268, 1166 0x25270, 0x25284, 1167 0x252fc, 0x25388, 1168 0x25400, 0x25404, 1169 0x25500, 0x25500, 1170 0x25510, 0x25518, 1171 0x2552c, 0x25530, 1172 0x2553c, 0x2553c, 1173 0x25550, 0x25554, 1174 0x25600, 0x25600, 1175 0x25608, 0x2561c, 1176 0x25624, 0x25628, 1177 0x25630, 0x25634, 1178 0x2563c, 0x2563c, 1179 0x25700, 0x2571c, 1180 0x25780, 0x2578c, 1181 0x25800, 0x25818, 1182 0x25820, 0x25828, 1183 0x25830, 0x25848, 1184 0x25850, 0x25854, 1185 0x25860, 0x25868, 1186 0x25870, 0x25870, 1187 0x25878, 0x25898, 1188 0x258a0, 0x258a8, 1189 0x258b0, 0x258c8, 1190 0x258d0, 0x258d4, 1191 0x258e0, 0x258e8, 1192 0x258f0, 0x258f0, 1193 0x258f8, 0x25a18, 1194 0x25a20, 0x25a28, 1195 0x25a30, 0x25a48, 1196 0x25a50, 0x25a54, 1197 0x25a60, 0x25a68, 1198 0x25a70, 0x25a70, 1199 0x25a78, 0x25a98, 1200 0x25aa0, 0x25aa8, 1201 0x25ab0, 0x25ac8, 1202 0x25ad0, 0x25ad4, 1203 0x25ae0, 0x25ae8, 1204 0x25af0, 0x25af0, 1205 0x25af8, 0x25c18, 1206 0x25c20, 0x25c20, 1207 0x25c28, 0x25c30, 1208 0x25c38, 0x25c38, 1209 0x25c80, 0x25c98, 1210 0x25ca0, 0x25ca8, 1211 0x25cb0, 0x25cc8, 1212 0x25cd0, 0x25cd4, 1213 0x25ce0, 0x25ce8, 1214 0x25cf0, 0x25cf0, 1215 0x25cf8, 0x25d7c, 1216 0x25e00, 0x25e04, 1217 0x26000, 0x2602c, 1218 0x26100, 0x2613c, 1219 0x26190, 0x261a0, 1220 0x261a8, 0x261b8, 1221 0x261c4, 0x261c8, 1222 0x26200, 0x26318, 1223 0x26400, 0x264b4, 1224 0x264c0, 0x26528, 1225 0x26540, 0x26614, 1226 0x27000, 0x27040, 1227 0x2704c, 0x27060, 1228 0x270c0, 0x270ec, 1229 0x27200, 0x27268, 1230 0x27270, 0x27284, 1231 0x272fc, 0x27388, 1232 0x27400, 0x27404, 1233 0x27500, 0x27500, 1234 0x27510, 0x27518, 1235 0x2752c, 0x27530, 1236 0x2753c, 0x2753c, 1237 0x27550, 0x27554, 1238 0x27600, 0x27600, 1239 0x27608, 0x2761c, 1240 0x27624, 0x27628, 1241 0x27630, 0x27634, 1242 0x2763c, 0x2763c, 1243 0x27700, 0x2771c, 1244 0x27780, 0x2778c, 1245 0x27800, 0x27818, 1246 0x27820, 0x27828, 1247 0x27830, 0x27848, 1248 0x27850, 0x27854, 1249 0x27860, 0x27868, 1250 0x27870, 0x27870, 1251 0x27878, 0x27898, 1252 0x278a0, 0x278a8, 1253 0x278b0, 0x278c8, 1254 0x278d0, 0x278d4, 1255 0x278e0, 0x278e8, 1256 0x278f0, 0x278f0, 1257 0x278f8, 0x27a18, 1258 0x27a20, 0x27a28, 1259 0x27a30, 0x27a48, 1260 0x27a50, 0x27a54, 1261 0x27a60, 0x27a68, 1262 0x27a70, 0x27a70, 1263 0x27a78, 0x27a98, 1264 0x27aa0, 0x27aa8, 1265 0x27ab0, 0x27ac8, 1266 0x27ad0, 0x27ad4, 1267 0x27ae0, 0x27ae8, 1268 0x27af0, 0x27af0, 1269 0x27af8, 0x27c18, 1270 0x27c20, 0x27c20, 1271 0x27c28, 0x27c30, 1272 0x27c38, 0x27c38, 1273 0x27c80, 0x27c98, 1274 0x27ca0, 0x27ca8, 1275 0x27cb0, 0x27cc8, 1276 0x27cd0, 0x27cd4, 1277 0x27ce0, 0x27ce8, 1278 0x27cf0, 0x27cf0, 1279 0x27cf8, 0x27d7c, 1280 0x27e00, 0x27e04, 1281 }; 1282 1283 static const unsigned int t4vf_reg_ranges[] = { 1284 VF_SGE_REG(A_SGE_VF_KDOORBELL), VF_SGE_REG(A_SGE_VF_GTS), 1285 VF_MPS_REG(A_MPS_VF_CTL), 1286 VF_MPS_REG(A_MPS_VF_STAT_RX_VF_ERR_FRAMES_H), 1287 VF_PL_REG(A_PL_VF_WHOAMI), VF_PL_REG(A_PL_VF_WHOAMI), 1288 VF_CIM_REG(A_CIM_VF_EXT_MAILBOX_CTRL), 1289 VF_CIM_REG(A_CIM_VF_EXT_MAILBOX_STATUS), 1290 FW_T4VF_MBDATA_BASE_ADDR, 1291 FW_T4VF_MBDATA_BASE_ADDR + 1292 ((NUM_CIM_PF_MAILBOX_DATA_INSTANCES - 1) * 4), 1293 }; 1294 1295 static const unsigned int t5_reg_ranges[] = { 1296 0x1008, 0x10c0, 1297 0x10cc, 0x10f8, 1298 0x1100, 0x1100, 1299 0x110c, 0x1148, 1300 0x1180, 0x1184, 1301 0x1190, 0x1194, 1302 0x11a0, 0x11a4, 1303 0x11b0, 0x11b4, 1304 0x11fc, 0x123c, 1305 0x1280, 0x173c, 1306 0x1800, 0x18fc, 1307 0x3000, 0x3028, 1308 0x3060, 0x30b0, 1309 0x30b8, 0x30d8, 1310 0x30e0, 0x30fc, 1311 0x3140, 0x357c, 1312 0x35a8, 0x35cc, 1313 0x35ec, 0x35ec, 1314 0x3600, 0x5624, 1315 0x56cc, 0x56ec, 1316 0x56f4, 0x5720, 1317 0x5728, 0x575c, 1318 0x580c, 0x5814, 1319 0x5890, 0x589c, 1320 0x58a4, 0x58ac, 1321 0x58b8, 0x58bc, 1322 0x5940, 0x59c8, 1323 0x59d0, 0x59dc, 1324 0x59fc, 0x5a18, 1325 0x5a60, 0x5a70, 1326 0x5a80, 0x5a9c, 1327 0x5b94, 0x5bfc, 1328 0x6000, 0x6020, 1329 0x6028, 0x6040, 1330 0x6058, 0x609c, 1331 0x60a8, 0x614c, 1332 0x7700, 0x7798, 1333 0x77c0, 0x78fc, 1334 0x7b00, 0x7b58, 1335 0x7b60, 0x7b84, 1336 0x7b8c, 0x7c54, 1337 0x7d00, 0x7d38, 1338 0x7d40, 0x7d80, 1339 0x7d8c, 0x7ddc, 1340 0x7de4, 0x7e04, 1341 0x7e10, 0x7e1c, 1342 0x7e24, 0x7e38, 1343 0x7e40, 0x7e44, 1344 0x7e4c, 0x7e78, 1345 0x7e80, 0x7edc, 1346 0x7ee8, 0x7efc, 1347 0x8dc0, 0x8de0, 1348 0x8df8, 0x8e04, 1349 0x8e10, 0x8e84, 1350 0x8ea0, 0x8f84, 1351 0x8fc0, 0x9058, 1352 0x9060, 0x9060, 1353 0x9068, 0x90f8, 1354 0x9400, 0x9408, 1355 0x9410, 0x9470, 1356 0x9600, 0x9600, 1357 0x9608, 0x9638, 1358 0x9640, 0x96f4, 1359 0x9800, 0x9808, 1360 0x9810, 0x9864, 1361 0x9c00, 0x9c6c, 1362 0x9c80, 0x9cec, 1363 0x9d00, 0x9d6c, 1364 0x9d80, 0x9dec, 1365 0x9e00, 0x9e6c, 1366 0x9e80, 0x9eec, 1367 0x9f00, 0x9f6c, 1368 0x9f80, 0xa020, 1369 0xd000, 0xd004, 1370 0xd010, 0xd03c, 1371 0xdfc0, 0xdfe0, 1372 0xe000, 0x1106c, 1373 0x11074, 0x11088, 1374 0x1109c, 0x11110, 1375 0x11118, 0x1117c, 1376 0x11190, 0x11204, 1377 0x19040, 0x1906c, 1378 0x19078, 0x19080, 1379 0x1908c, 0x190e8, 1380 0x190f0, 0x190f8, 1381 0x19100, 0x19110, 1382 0x19120, 0x19124, 1383 0x19150, 0x19194, 1384 0x1919c, 0x191b0, 1385 0x191d0, 0x191e8, 1386 0x19238, 0x19290, 1387 0x193f8, 0x19428, 1388 0x19430, 0x19444, 1389 0x1944c, 0x1946c, 1390 0x19474, 0x19474, 1391 0x19490, 0x194cc, 1392 0x194f0, 0x194f8, 1393 0x19c00, 0x19c08, 1394 0x19c10, 0x19c60, 1395 0x19c94, 0x19ce4, 1396 0x19cf0, 0x19d40, 1397 0x19d50, 0x19d94, 1398 0x19da0, 0x19de8, 1399 0x19df0, 0x19e10, 1400 0x19e50, 0x19e90, 1401 0x19ea0, 0x19f24, 1402 0x19f34, 0x19f34, 1403 0x19f40, 0x19f50, 1404 0x19f90, 0x19fb4, 1405 0x19fc4, 0x19fe4, 1406 0x1a000, 0x1a004, 1407 0x1a010, 0x1a06c, 1408 0x1a0b0, 0x1a0e4, 1409 0x1a0ec, 0x1a0f8, 1410 0x1a100, 0x1a108, 1411 0x1a114, 0x1a130, 1412 0x1a138, 0x1a1c4, 1413 0x1a1fc, 0x1a1fc, 1414 0x1e008, 0x1e00c, 1415 0x1e040, 0x1e044, 1416 0x1e04c, 0x1e04c, 1417 0x1e284, 0x1e290, 1418 0x1e2c0, 0x1e2c0, 1419 0x1e2e0, 0x1e2e0, 1420 0x1e300, 0x1e384, 1421 0x1e3c0, 0x1e3c8, 1422 0x1e408, 0x1e40c, 1423 0x1e440, 0x1e444, 1424 0x1e44c, 0x1e44c, 1425 0x1e684, 0x1e690, 1426 0x1e6c0, 0x1e6c0, 1427 0x1e6e0, 0x1e6e0, 1428 0x1e700, 0x1e784, 1429 0x1e7c0, 0x1e7c8, 1430 0x1e808, 0x1e80c, 1431 0x1e840, 0x1e844, 1432 0x1e84c, 0x1e84c, 1433 0x1ea84, 0x1ea90, 1434 0x1eac0, 0x1eac0, 1435 0x1eae0, 0x1eae0, 1436 0x1eb00, 0x1eb84, 1437 0x1ebc0, 0x1ebc8, 1438 0x1ec08, 0x1ec0c, 1439 0x1ec40, 0x1ec44, 1440 0x1ec4c, 0x1ec4c, 1441 0x1ee84, 0x1ee90, 1442 0x1eec0, 0x1eec0, 1443 0x1eee0, 0x1eee0, 1444 0x1ef00, 0x1ef84, 1445 0x1efc0, 0x1efc8, 1446 0x1f008, 0x1f00c, 1447 0x1f040, 0x1f044, 1448 0x1f04c, 0x1f04c, 1449 0x1f284, 0x1f290, 1450 0x1f2c0, 0x1f2c0, 1451 0x1f2e0, 0x1f2e0, 1452 0x1f300, 0x1f384, 1453 0x1f3c0, 0x1f3c8, 1454 0x1f408, 0x1f40c, 1455 0x1f440, 0x1f444, 1456 0x1f44c, 0x1f44c, 1457 0x1f684, 0x1f690, 1458 0x1f6c0, 0x1f6c0, 1459 0x1f6e0, 0x1f6e0, 1460 0x1f700, 0x1f784, 1461 0x1f7c0, 0x1f7c8, 1462 0x1f808, 0x1f80c, 1463 0x1f840, 0x1f844, 1464 0x1f84c, 0x1f84c, 1465 0x1fa84, 0x1fa90, 1466 0x1fac0, 0x1fac0, 1467 0x1fae0, 0x1fae0, 1468 0x1fb00, 0x1fb84, 1469 0x1fbc0, 0x1fbc8, 1470 0x1fc08, 0x1fc0c, 1471 0x1fc40, 0x1fc44, 1472 0x1fc4c, 0x1fc4c, 1473 0x1fe84, 0x1fe90, 1474 0x1fec0, 0x1fec0, 1475 0x1fee0, 0x1fee0, 1476 0x1ff00, 0x1ff84, 1477 0x1ffc0, 0x1ffc8, 1478 0x30000, 0x30030, 1479 0x30100, 0x30144, 1480 0x30190, 0x301a0, 1481 0x301a8, 0x301b8, 1482 0x301c4, 0x301c8, 1483 0x301d0, 0x301d0, 1484 0x30200, 0x30318, 1485 0x30400, 0x304b4, 1486 0x304c0, 0x3052c, 1487 0x30540, 0x3061c, 1488 0x30800, 0x30828, 1489 0x30834, 0x30834, 1490 0x308c0, 0x30908, 1491 0x30910, 0x309ac, 1492 0x30a00, 0x30a14, 1493 0x30a1c, 0x30a2c, 1494 0x30a44, 0x30a50, 1495 0x30a74, 0x30a74, 1496 0x30a7c, 0x30afc, 1497 0x30b08, 0x30c24, 1498 0x30d00, 0x30d00, 1499 0x30d08, 0x30d14, 1500 0x30d1c, 0x30d20, 1501 0x30d3c, 0x30d3c, 1502 0x30d48, 0x30d50, 1503 0x31200, 0x3120c, 1504 0x31220, 0x31220, 1505 0x31240, 0x31240, 1506 0x31600, 0x3160c, 1507 0x31a00, 0x31a1c, 1508 0x31e00, 0x31e20, 1509 0x31e38, 0x31e3c, 1510 0x31e80, 0x31e80, 1511 0x31e88, 0x31ea8, 1512 0x31eb0, 0x31eb4, 1513 0x31ec8, 0x31ed4, 1514 0x31fb8, 0x32004, 1515 0x32200, 0x32200, 1516 0x32208, 0x32240, 1517 0x32248, 0x32280, 1518 0x32288, 0x322c0, 1519 0x322c8, 0x322fc, 1520 0x32600, 0x32630, 1521 0x32a00, 0x32abc, 1522 0x32b00, 0x32b10, 1523 0x32b20, 0x32b30, 1524 0x32b40, 0x32b50, 1525 0x32b60, 0x32b70, 1526 0x33000, 0x33028, 1527 0x33030, 0x33048, 1528 0x33060, 0x33068, 1529 0x33070, 0x3309c, 1530 0x330f0, 0x33128, 1531 0x33130, 0x33148, 1532 0x33160, 0x33168, 1533 0x33170, 0x3319c, 1534 0x331f0, 0x33238, 1535 0x33240, 0x33240, 1536 0x33248, 0x33250, 1537 0x3325c, 0x33264, 1538 0x33270, 0x332b8, 1539 0x332c0, 0x332e4, 1540 0x332f8, 0x33338, 1541 0x33340, 0x33340, 1542 0x33348, 0x33350, 1543 0x3335c, 0x33364, 1544 0x33370, 0x333b8, 1545 0x333c0, 0x333e4, 1546 0x333f8, 0x33428, 1547 0x33430, 0x33448, 1548 0x33460, 0x33468, 1549 0x33470, 0x3349c, 1550 0x334f0, 0x33528, 1551 0x33530, 0x33548, 1552 0x33560, 0x33568, 1553 0x33570, 0x3359c, 1554 0x335f0, 0x33638, 1555 0x33640, 0x33640, 1556 0x33648, 0x33650, 1557 0x3365c, 0x33664, 1558 0x33670, 0x336b8, 1559 0x336c0, 0x336e4, 1560 0x336f8, 0x33738, 1561 0x33740, 0x33740, 1562 0x33748, 0x33750, 1563 0x3375c, 0x33764, 1564 0x33770, 0x337b8, 1565 0x337c0, 0x337e4, 1566 0x337f8, 0x337fc, 1567 0x33814, 0x33814, 1568 0x3382c, 0x3382c, 1569 0x33880, 0x3388c, 1570 0x338e8, 0x338ec, 1571 0x33900, 0x33928, 1572 0x33930, 0x33948, 1573 0x33960, 0x33968, 1574 0x33970, 0x3399c, 1575 0x339f0, 0x33a38, 1576 0x33a40, 0x33a40, 1577 0x33a48, 0x33a50, 1578 0x33a5c, 0x33a64, 1579 0x33a70, 0x33ab8, 1580 0x33ac0, 0x33ae4, 1581 0x33af8, 0x33b10, 1582 0x33b28, 0x33b28, 1583 0x33b3c, 0x33b50, 1584 0x33bf0, 0x33c10, 1585 0x33c28, 0x33c28, 1586 0x33c3c, 0x33c50, 1587 0x33cf0, 0x33cfc, 1588 0x34000, 0x34030, 1589 0x34100, 0x34144, 1590 0x34190, 0x341a0, 1591 0x341a8, 0x341b8, 1592 0x341c4, 0x341c8, 1593 0x341d0, 0x341d0, 1594 0x34200, 0x34318, 1595 0x34400, 0x344b4, 1596 0x344c0, 0x3452c, 1597 0x34540, 0x3461c, 1598 0x34800, 0x34828, 1599 0x34834, 0x34834, 1600 0x348c0, 0x34908, 1601 0x34910, 0x349ac, 1602 0x34a00, 0x34a14, 1603 0x34a1c, 0x34a2c, 1604 0x34a44, 0x34a50, 1605 0x34a74, 0x34a74, 1606 0x34a7c, 0x34afc, 1607 0x34b08, 0x34c24, 1608 0x34d00, 0x34d00, 1609 0x34d08, 0x34d14, 1610 0x34d1c, 0x34d20, 1611 0x34d3c, 0x34d3c, 1612 0x34d48, 0x34d50, 1613 0x35200, 0x3520c, 1614 0x35220, 0x35220, 1615 0x35240, 0x35240, 1616 0x35600, 0x3560c, 1617 0x35a00, 0x35a1c, 1618 0x35e00, 0x35e20, 1619 0x35e38, 0x35e3c, 1620 0x35e80, 0x35e80, 1621 0x35e88, 0x35ea8, 1622 0x35eb0, 0x35eb4, 1623 0x35ec8, 0x35ed4, 1624 0x35fb8, 0x36004, 1625 0x36200, 0x36200, 1626 0x36208, 0x36240, 1627 0x36248, 0x36280, 1628 0x36288, 0x362c0, 1629 0x362c8, 0x362fc, 1630 0x36600, 0x36630, 1631 0x36a00, 0x36abc, 1632 0x36b00, 0x36b10, 1633 0x36b20, 0x36b30, 1634 0x36b40, 0x36b50, 1635 0x36b60, 0x36b70, 1636 0x37000, 0x37028, 1637 0x37030, 0x37048, 1638 0x37060, 0x37068, 1639 0x37070, 0x3709c, 1640 0x370f0, 0x37128, 1641 0x37130, 0x37148, 1642 0x37160, 0x37168, 1643 0x37170, 0x3719c, 1644 0x371f0, 0x37238, 1645 0x37240, 0x37240, 1646 0x37248, 0x37250, 1647 0x3725c, 0x37264, 1648 0x37270, 0x372b8, 1649 0x372c0, 0x372e4, 1650 0x372f8, 0x37338, 1651 0x37340, 0x37340, 1652 0x37348, 0x37350, 1653 0x3735c, 0x37364, 1654 0x37370, 0x373b8, 1655 0x373c0, 0x373e4, 1656 0x373f8, 0x37428, 1657 0x37430, 0x37448, 1658 0x37460, 0x37468, 1659 0x37470, 0x3749c, 1660 0x374f0, 0x37528, 1661 0x37530, 0x37548, 1662 0x37560, 0x37568, 1663 0x37570, 0x3759c, 1664 0x375f0, 0x37638, 1665 0x37640, 0x37640, 1666 0x37648, 0x37650, 1667 0x3765c, 0x37664, 1668 0x37670, 0x376b8, 1669 0x376c0, 0x376e4, 1670 0x376f8, 0x37738, 1671 0x37740, 0x37740, 1672 0x37748, 0x37750, 1673 0x3775c, 0x37764, 1674 0x37770, 0x377b8, 1675 0x377c0, 0x377e4, 1676 0x377f8, 0x377fc, 1677 0x37814, 0x37814, 1678 0x3782c, 0x3782c, 1679 0x37880, 0x3788c, 1680 0x378e8, 0x378ec, 1681 0x37900, 0x37928, 1682 0x37930, 0x37948, 1683 0x37960, 0x37968, 1684 0x37970, 0x3799c, 1685 0x379f0, 0x37a38, 1686 0x37a40, 0x37a40, 1687 0x37a48, 0x37a50, 1688 0x37a5c, 0x37a64, 1689 0x37a70, 0x37ab8, 1690 0x37ac0, 0x37ae4, 1691 0x37af8, 0x37b10, 1692 0x37b28, 0x37b28, 1693 0x37b3c, 0x37b50, 1694 0x37bf0, 0x37c10, 1695 0x37c28, 0x37c28, 1696 0x37c3c, 0x37c50, 1697 0x37cf0, 0x37cfc, 1698 0x38000, 0x38030, 1699 0x38100, 0x38144, 1700 0x38190, 0x381a0, 1701 0x381a8, 0x381b8, 1702 0x381c4, 0x381c8, 1703 0x381d0, 0x381d0, 1704 0x38200, 0x38318, 1705 0x38400, 0x384b4, 1706 0x384c0, 0x3852c, 1707 0x38540, 0x3861c, 1708 0x38800, 0x38828, 1709 0x38834, 0x38834, 1710 0x388c0, 0x38908, 1711 0x38910, 0x389ac, 1712 0x38a00, 0x38a14, 1713 0x38a1c, 0x38a2c, 1714 0x38a44, 0x38a50, 1715 0x38a74, 0x38a74, 1716 0x38a7c, 0x38afc, 1717 0x38b08, 0x38c24, 1718 0x38d00, 0x38d00, 1719 0x38d08, 0x38d14, 1720 0x38d1c, 0x38d20, 1721 0x38d3c, 0x38d3c, 1722 0x38d48, 0x38d50, 1723 0x39200, 0x3920c, 1724 0x39220, 0x39220, 1725 0x39240, 0x39240, 1726 0x39600, 0x3960c, 1727 0x39a00, 0x39a1c, 1728 0x39e00, 0x39e20, 1729 0x39e38, 0x39e3c, 1730 0x39e80, 0x39e80, 1731 0x39e88, 0x39ea8, 1732 0x39eb0, 0x39eb4, 1733 0x39ec8, 0x39ed4, 1734 0x39fb8, 0x3a004, 1735 0x3a200, 0x3a200, 1736 0x3a208, 0x3a240, 1737 0x3a248, 0x3a280, 1738 0x3a288, 0x3a2c0, 1739 0x3a2c8, 0x3a2fc, 1740 0x3a600, 0x3a630, 1741 0x3aa00, 0x3aabc, 1742 0x3ab00, 0x3ab10, 1743 0x3ab20, 0x3ab30, 1744 0x3ab40, 0x3ab50, 1745 0x3ab60, 0x3ab70, 1746 0x3b000, 0x3b028, 1747 0x3b030, 0x3b048, 1748 0x3b060, 0x3b068, 1749 0x3b070, 0x3b09c, 1750 0x3b0f0, 0x3b128, 1751 0x3b130, 0x3b148, 1752 0x3b160, 0x3b168, 1753 0x3b170, 0x3b19c, 1754 0x3b1f0, 0x3b238, 1755 0x3b240, 0x3b240, 1756 0x3b248, 0x3b250, 1757 0x3b25c, 0x3b264, 1758 0x3b270, 0x3b2b8, 1759 0x3b2c0, 0x3b2e4, 1760 0x3b2f8, 0x3b338, 1761 0x3b340, 0x3b340, 1762 0x3b348, 0x3b350, 1763 0x3b35c, 0x3b364, 1764 0x3b370, 0x3b3b8, 1765 0x3b3c0, 0x3b3e4, 1766 0x3b3f8, 0x3b428, 1767 0x3b430, 0x3b448, 1768 0x3b460, 0x3b468, 1769 0x3b470, 0x3b49c, 1770 0x3b4f0, 0x3b528, 1771 0x3b530, 0x3b548, 1772 0x3b560, 0x3b568, 1773 0x3b570, 0x3b59c, 1774 0x3b5f0, 0x3b638, 1775 0x3b640, 0x3b640, 1776 0x3b648, 0x3b650, 1777 0x3b65c, 0x3b664, 1778 0x3b670, 0x3b6b8, 1779 0x3b6c0, 0x3b6e4, 1780 0x3b6f8, 0x3b738, 1781 0x3b740, 0x3b740, 1782 0x3b748, 0x3b750, 1783 0x3b75c, 0x3b764, 1784 0x3b770, 0x3b7b8, 1785 0x3b7c0, 0x3b7e4, 1786 0x3b7f8, 0x3b7fc, 1787 0x3b814, 0x3b814, 1788 0x3b82c, 0x3b82c, 1789 0x3b880, 0x3b88c, 1790 0x3b8e8, 0x3b8ec, 1791 0x3b900, 0x3b928, 1792 0x3b930, 0x3b948, 1793 0x3b960, 0x3b968, 1794 0x3b970, 0x3b99c, 1795 0x3b9f0, 0x3ba38, 1796 0x3ba40, 0x3ba40, 1797 0x3ba48, 0x3ba50, 1798 0x3ba5c, 0x3ba64, 1799 0x3ba70, 0x3bab8, 1800 0x3bac0, 0x3bae4, 1801 0x3baf8, 0x3bb10, 1802 0x3bb28, 0x3bb28, 1803 0x3bb3c, 0x3bb50, 1804 0x3bbf0, 0x3bc10, 1805 0x3bc28, 0x3bc28, 1806 0x3bc3c, 0x3bc50, 1807 0x3bcf0, 0x3bcfc, 1808 0x3c000, 0x3c030, 1809 0x3c100, 0x3c144, 1810 0x3c190, 0x3c1a0, 1811 0x3c1a8, 0x3c1b8, 1812 0x3c1c4, 0x3c1c8, 1813 0x3c1d0, 0x3c1d0, 1814 0x3c200, 0x3c318, 1815 0x3c400, 0x3c4b4, 1816 0x3c4c0, 0x3c52c, 1817 0x3c540, 0x3c61c, 1818 0x3c800, 0x3c828, 1819 0x3c834, 0x3c834, 1820 0x3c8c0, 0x3c908, 1821 0x3c910, 0x3c9ac, 1822 0x3ca00, 0x3ca14, 1823 0x3ca1c, 0x3ca2c, 1824 0x3ca44, 0x3ca50, 1825 0x3ca74, 0x3ca74, 1826 0x3ca7c, 0x3cafc, 1827 0x3cb08, 0x3cc24, 1828 0x3cd00, 0x3cd00, 1829 0x3cd08, 0x3cd14, 1830 0x3cd1c, 0x3cd20, 1831 0x3cd3c, 0x3cd3c, 1832 0x3cd48, 0x3cd50, 1833 0x3d200, 0x3d20c, 1834 0x3d220, 0x3d220, 1835 0x3d240, 0x3d240, 1836 0x3d600, 0x3d60c, 1837 0x3da00, 0x3da1c, 1838 0x3de00, 0x3de20, 1839 0x3de38, 0x3de3c, 1840 0x3de80, 0x3de80, 1841 0x3de88, 0x3dea8, 1842 0x3deb0, 0x3deb4, 1843 0x3dec8, 0x3ded4, 1844 0x3dfb8, 0x3e004, 1845 0x3e200, 0x3e200, 1846 0x3e208, 0x3e240, 1847 0x3e248, 0x3e280, 1848 0x3e288, 0x3e2c0, 1849 0x3e2c8, 0x3e2fc, 1850 0x3e600, 0x3e630, 1851 0x3ea00, 0x3eabc, 1852 0x3eb00, 0x3eb10, 1853 0x3eb20, 0x3eb30, 1854 0x3eb40, 0x3eb50, 1855 0x3eb60, 0x3eb70, 1856 0x3f000, 0x3f028, 1857 0x3f030, 0x3f048, 1858 0x3f060, 0x3f068, 1859 0x3f070, 0x3f09c, 1860 0x3f0f0, 0x3f128, 1861 0x3f130, 0x3f148, 1862 0x3f160, 0x3f168, 1863 0x3f170, 0x3f19c, 1864 0x3f1f0, 0x3f238, 1865 0x3f240, 0x3f240, 1866 0x3f248, 0x3f250, 1867 0x3f25c, 0x3f264, 1868 0x3f270, 0x3f2b8, 1869 0x3f2c0, 0x3f2e4, 1870 0x3f2f8, 0x3f338, 1871 0x3f340, 0x3f340, 1872 0x3f348, 0x3f350, 1873 0x3f35c, 0x3f364, 1874 0x3f370, 0x3f3b8, 1875 0x3f3c0, 0x3f3e4, 1876 0x3f3f8, 0x3f428, 1877 0x3f430, 0x3f448, 1878 0x3f460, 0x3f468, 1879 0x3f470, 0x3f49c, 1880 0x3f4f0, 0x3f528, 1881 0x3f530, 0x3f548, 1882 0x3f560, 0x3f568, 1883 0x3f570, 0x3f59c, 1884 0x3f5f0, 0x3f638, 1885 0x3f640, 0x3f640, 1886 0x3f648, 0x3f650, 1887 0x3f65c, 0x3f664, 1888 0x3f670, 0x3f6b8, 1889 0x3f6c0, 0x3f6e4, 1890 0x3f6f8, 0x3f738, 1891 0x3f740, 0x3f740, 1892 0x3f748, 0x3f750, 1893 0x3f75c, 0x3f764, 1894 0x3f770, 0x3f7b8, 1895 0x3f7c0, 0x3f7e4, 1896 0x3f7f8, 0x3f7fc, 1897 0x3f814, 0x3f814, 1898 0x3f82c, 0x3f82c, 1899 0x3f880, 0x3f88c, 1900 0x3f8e8, 0x3f8ec, 1901 0x3f900, 0x3f928, 1902 0x3f930, 0x3f948, 1903 0x3f960, 0x3f968, 1904 0x3f970, 0x3f99c, 1905 0x3f9f0, 0x3fa38, 1906 0x3fa40, 0x3fa40, 1907 0x3fa48, 0x3fa50, 1908 0x3fa5c, 0x3fa64, 1909 0x3fa70, 0x3fab8, 1910 0x3fac0, 0x3fae4, 1911 0x3faf8, 0x3fb10, 1912 0x3fb28, 0x3fb28, 1913 0x3fb3c, 0x3fb50, 1914 0x3fbf0, 0x3fc10, 1915 0x3fc28, 0x3fc28, 1916 0x3fc3c, 0x3fc50, 1917 0x3fcf0, 0x3fcfc, 1918 0x40000, 0x4000c, 1919 0x40040, 0x40050, 1920 0x40060, 0x40068, 1921 0x4007c, 0x4008c, 1922 0x40094, 0x400b0, 1923 0x400c0, 0x40144, 1924 0x40180, 0x4018c, 1925 0x40200, 0x40254, 1926 0x40260, 0x40264, 1927 0x40270, 0x40288, 1928 0x40290, 0x40298, 1929 0x402ac, 0x402c8, 1930 0x402d0, 0x402e0, 1931 0x402f0, 0x402f0, 1932 0x40300, 0x4033c, 1933 0x403f8, 0x403fc, 1934 0x41304, 0x413c4, 1935 0x41400, 0x4140c, 1936 0x41414, 0x4141c, 1937 0x41480, 0x414d0, 1938 0x44000, 0x44054, 1939 0x4405c, 0x44078, 1940 0x440c0, 0x44174, 1941 0x44180, 0x441ac, 1942 0x441b4, 0x441b8, 1943 0x441c0, 0x44254, 1944 0x4425c, 0x44278, 1945 0x442c0, 0x44374, 1946 0x44380, 0x443ac, 1947 0x443b4, 0x443b8, 1948 0x443c0, 0x44454, 1949 0x4445c, 0x44478, 1950 0x444c0, 0x44574, 1951 0x44580, 0x445ac, 1952 0x445b4, 0x445b8, 1953 0x445c0, 0x44654, 1954 0x4465c, 0x44678, 1955 0x446c0, 0x44774, 1956 0x44780, 0x447ac, 1957 0x447b4, 0x447b8, 1958 0x447c0, 0x44854, 1959 0x4485c, 0x44878, 1960 0x448c0, 0x44974, 1961 0x44980, 0x449ac, 1962 0x449b4, 0x449b8, 1963 0x449c0, 0x449fc, 1964 0x45000, 0x45004, 1965 0x45010, 0x45030, 1966 0x45040, 0x45060, 1967 0x45068, 0x45068, 1968 0x45080, 0x45084, 1969 0x450a0, 0x450b0, 1970 0x45200, 0x45204, 1971 0x45210, 0x45230, 1972 0x45240, 0x45260, 1973 0x45268, 0x45268, 1974 0x45280, 0x45284, 1975 0x452a0, 0x452b0, 1976 0x460c0, 0x460e4, 1977 0x47000, 0x4703c, 1978 0x47044, 0x4708c, 1979 0x47200, 0x47250, 1980 0x47400, 0x47408, 1981 0x47414, 0x47420, 1982 0x47600, 0x47618, 1983 0x47800, 0x47814, 1984 0x48000, 0x4800c, 1985 0x48040, 0x48050, 1986 0x48060, 0x48068, 1987 0x4807c, 0x4808c, 1988 0x48094, 0x480b0, 1989 0x480c0, 0x48144, 1990 0x48180, 0x4818c, 1991 0x48200, 0x48254, 1992 0x48260, 0x48264, 1993 0x48270, 0x48288, 1994 0x48290, 0x48298, 1995 0x482ac, 0x482c8, 1996 0x482d0, 0x482e0, 1997 0x482f0, 0x482f0, 1998 0x48300, 0x4833c, 1999 0x483f8, 0x483fc, 2000 0x49304, 0x493c4, 2001 0x49400, 0x4940c, 2002 0x49414, 0x4941c, 2003 0x49480, 0x494d0, 2004 0x4c000, 0x4c054, 2005 0x4c05c, 0x4c078, 2006 0x4c0c0, 0x4c174, 2007 0x4c180, 0x4c1ac, 2008 0x4c1b4, 0x4c1b8, 2009 0x4c1c0, 0x4c254, 2010 0x4c25c, 0x4c278, 2011 0x4c2c0, 0x4c374, 2012 0x4c380, 0x4c3ac, 2013 0x4c3b4, 0x4c3b8, 2014 0x4c3c0, 0x4c454, 2015 0x4c45c, 0x4c478, 2016 0x4c4c0, 0x4c574, 2017 0x4c580, 0x4c5ac, 2018 0x4c5b4, 0x4c5b8, 2019 0x4c5c0, 0x4c654, 2020 0x4c65c, 0x4c678, 2021 0x4c6c0, 0x4c774, 2022 0x4c780, 0x4c7ac, 2023 0x4c7b4, 0x4c7b8, 2024 0x4c7c0, 0x4c854, 2025 0x4c85c, 0x4c878, 2026 0x4c8c0, 0x4c974, 2027 0x4c980, 0x4c9ac, 2028 0x4c9b4, 0x4c9b8, 2029 0x4c9c0, 0x4c9fc, 2030 0x4d000, 0x4d004, 2031 0x4d010, 0x4d030, 2032 0x4d040, 0x4d060, 2033 0x4d068, 0x4d068, 2034 0x4d080, 0x4d084, 2035 0x4d0a0, 0x4d0b0, 2036 0x4d200, 0x4d204, 2037 0x4d210, 0x4d230, 2038 0x4d240, 0x4d260, 2039 0x4d268, 0x4d268, 2040 0x4d280, 0x4d284, 2041 0x4d2a0, 0x4d2b0, 2042 0x4e0c0, 0x4e0e4, 2043 0x4f000, 0x4f03c, 2044 0x4f044, 0x4f08c, 2045 0x4f200, 0x4f250, 2046 0x4f400, 0x4f408, 2047 0x4f414, 0x4f420, 2048 0x4f600, 0x4f618, 2049 0x4f800, 0x4f814, 2050 0x50000, 0x50084, 2051 0x50090, 0x500cc, 2052 0x50400, 0x50400, 2053 0x50800, 0x50884, 2054 0x50890, 0x508cc, 2055 0x50c00, 0x50c00, 2056 0x51000, 0x5101c, 2057 0x51300, 0x51308, 2058 }; 2059 2060 static const unsigned int t5vf_reg_ranges[] = { 2061 VF_SGE_REG(A_SGE_VF_KDOORBELL), VF_SGE_REG(A_SGE_VF_GTS), 2062 VF_MPS_REG(A_MPS_VF_CTL), 2063 VF_MPS_REG(A_MPS_VF_STAT_RX_VF_ERR_FRAMES_H), 2064 VF_PL_REG(A_PL_VF_WHOAMI), VF_PL_REG(A_PL_VF_REVISION), 2065 VF_CIM_REG(A_CIM_VF_EXT_MAILBOX_CTRL), 2066 VF_CIM_REG(A_CIM_VF_EXT_MAILBOX_STATUS), 2067 FW_T4VF_MBDATA_BASE_ADDR, 2068 FW_T4VF_MBDATA_BASE_ADDR + 2069 ((NUM_CIM_PF_MAILBOX_DATA_INSTANCES - 1) * 4), 2070 }; 2071 2072 static const unsigned int t6_reg_ranges[] = { 2073 0x1008, 0x101c, 2074 0x1024, 0x10a8, 2075 0x10b4, 0x10f8, 2076 0x1100, 0x1114, 2077 0x111c, 0x112c, 2078 0x1138, 0x113c, 2079 0x1144, 0x114c, 2080 0x1180, 0x1184, 2081 0x1190, 0x1194, 2082 0x11a0, 0x11a4, 2083 0x11b0, 0x11c4, 2084 0x11fc, 0x123c, 2085 0x1254, 0x1274, 2086 0x1280, 0x133c, 2087 0x1800, 0x18fc, 2088 0x3000, 0x302c, 2089 0x3060, 0x30b0, 2090 0x30b8, 0x30d8, 2091 0x30e0, 0x30fc, 2092 0x3140, 0x357c, 2093 0x35a8, 0x35cc, 2094 0x35ec, 0x35ec, 2095 0x3600, 0x5624, 2096 0x56cc, 0x56ec, 2097 0x56f4, 0x5720, 2098 0x5728, 0x575c, 2099 0x580c, 0x5814, 2100 0x5890, 0x589c, 2101 0x58a4, 0x58ac, 2102 0x58b8, 0x58bc, 2103 0x5940, 0x595c, 2104 0x5980, 0x598c, 2105 0x59b0, 0x59c8, 2106 0x59d0, 0x59dc, 2107 0x59fc, 0x5a18, 2108 0x5a60, 0x5a6c, 2109 0x5a80, 0x5a8c, 2110 0x5a94, 0x5a9c, 2111 0x5b94, 0x5bfc, 2112 0x5c10, 0x5e48, 2113 0x5e50, 0x5e94, 2114 0x5ea0, 0x5eb0, 2115 0x5ec0, 0x5ec0, 2116 0x5ec8, 0x5ed0, 2117 0x5ee0, 0x5ee0, 2118 0x5ef0, 0x5ef0, 2119 0x5f00, 0x5f00, 2120 0x6000, 0x6020, 2121 0x6028, 0x6040, 2122 0x6058, 0x609c, 2123 0x60a8, 0x619c, 2124 0x7700, 0x7798, 2125 0x77c0, 0x7880, 2126 0x78cc, 0x78fc, 2127 0x7b00, 0x7b58, 2128 0x7b60, 0x7b84, 2129 0x7b8c, 0x7c54, 2130 0x7d00, 0x7d38, 2131 0x7d40, 0x7d84, 2132 0x7d8c, 0x7ddc, 2133 0x7de4, 0x7e04, 2134 0x7e10, 0x7e1c, 2135 0x7e24, 0x7e38, 2136 0x7e40, 0x7e44, 2137 0x7e4c, 0x7e78, 2138 0x7e80, 0x7edc, 2139 0x7ee8, 0x7efc, 2140 0x8dc0, 0x8de0, 2141 0x8df8, 0x8e04, 2142 0x8e10, 0x8e84, 2143 0x8ea0, 0x8f88, 2144 0x8fb8, 0x9058, 2145 0x9060, 0x9060, 2146 0x9068, 0x90f8, 2147 0x9100, 0x9124, 2148 0x9400, 0x9470, 2149 0x9600, 0x9600, 2150 0x9608, 0x9638, 2151 0x9640, 0x9704, 2152 0x9710, 0x971c, 2153 0x9800, 0x9808, 2154 0x9810, 0x9864, 2155 0x9c00, 0x9c6c, 2156 0x9c80, 0x9cec, 2157 0x9d00, 0x9d6c, 2158 0x9d80, 0x9dec, 2159 0x9e00, 0x9e6c, 2160 0x9e80, 0x9eec, 2161 0x9f00, 0x9f6c, 2162 0x9f80, 0xa020, 2163 0xd000, 0xd03c, 2164 0xd100, 0xd118, 2165 0xd200, 0xd214, 2166 0xd220, 0xd234, 2167 0xd240, 0xd254, 2168 0xd260, 0xd274, 2169 0xd280, 0xd294, 2170 0xd2a0, 0xd2b4, 2171 0xd2c0, 0xd2d4, 2172 0xd2e0, 0xd2f4, 2173 0xd300, 0xd31c, 2174 0xdfc0, 0xdfe0, 2175 0xe000, 0xf008, 2176 0xf010, 0xf018, 2177 0xf020, 0xf028, 2178 0x11000, 0x11014, 2179 0x11048, 0x1106c, 2180 0x11074, 0x11088, 2181 0x11098, 0x11120, 2182 0x1112c, 0x1117c, 2183 0x11190, 0x112e0, 2184 0x11300, 0x1130c, 2185 0x12000, 0x1206c, 2186 0x19040, 0x1906c, 2187 0x19078, 0x19080, 2188 0x1908c, 0x190e8, 2189 0x190f0, 0x190f8, 2190 0x19100, 0x19110, 2191 0x19120, 0x19124, 2192 0x19150, 0x19194, 2193 0x1919c, 0x191b0, 2194 0x191d0, 0x191e8, 2195 0x19238, 0x19290, 2196 0x192a4, 0x192b0, 2197 0x19348, 0x1934c, 2198 0x193f8, 0x19418, 2199 0x19420, 0x19428, 2200 0x19430, 0x19444, 2201 0x1944c, 0x1946c, 2202 0x19474, 0x19474, 2203 0x19490, 0x194cc, 2204 0x194f0, 0x194f8, 2205 0x19c00, 0x19c48, 2206 0x19c50, 0x19c80, 2207 0x19c94, 0x19c98, 2208 0x19ca0, 0x19cbc, 2209 0x19ce4, 0x19ce4, 2210 0x19cf0, 0x19cf8, 2211 0x19d00, 0x19d28, 2212 0x19d50, 0x19d78, 2213 0x19d94, 0x19d98, 2214 0x19da0, 0x19de0, 2215 0x19df0, 0x19e10, 2216 0x19e50, 0x19e6c, 2217 0x19ea0, 0x19ebc, 2218 0x19ec4, 0x19ef4, 2219 0x19f04, 0x19f2c, 2220 0x19f34, 0x19f34, 2221 0x19f40, 0x19f50, 2222 0x19f90, 0x19fac, 2223 0x19fc4, 0x19fc8, 2224 0x19fd0, 0x19fe4, 2225 0x1a000, 0x1a004, 2226 0x1a010, 0x1a06c, 2227 0x1a0b0, 0x1a0e4, 2228 0x1a0ec, 0x1a0f8, 2229 0x1a100, 0x1a108, 2230 0x1a114, 0x1a130, 2231 0x1a138, 0x1a1c4, 2232 0x1a1fc, 0x1a1fc, 2233 0x1e008, 0x1e00c, 2234 0x1e040, 0x1e044, 2235 0x1e04c, 0x1e04c, 2236 0x1e284, 0x1e290, 2237 0x1e2c0, 0x1e2c0, 2238 0x1e2e0, 0x1e2e0, 2239 0x1e300, 0x1e384, 2240 0x1e3c0, 0x1e3c8, 2241 0x1e408, 0x1e40c, 2242 0x1e440, 0x1e444, 2243 0x1e44c, 0x1e44c, 2244 0x1e684, 0x1e690, 2245 0x1e6c0, 0x1e6c0, 2246 0x1e6e0, 0x1e6e0, 2247 0x1e700, 0x1e784, 2248 0x1e7c0, 0x1e7c8, 2249 0x1e808, 0x1e80c, 2250 0x1e840, 0x1e844, 2251 0x1e84c, 0x1e84c, 2252 0x1ea84, 0x1ea90, 2253 0x1eac0, 0x1eac0, 2254 0x1eae0, 0x1eae0, 2255 0x1eb00, 0x1eb84, 2256 0x1ebc0, 0x1ebc8, 2257 0x1ec08, 0x1ec0c, 2258 0x1ec40, 0x1ec44, 2259 0x1ec4c, 0x1ec4c, 2260 0x1ee84, 0x1ee90, 2261 0x1eec0, 0x1eec0, 2262 0x1eee0, 0x1eee0, 2263 0x1ef00, 0x1ef84, 2264 0x1efc0, 0x1efc8, 2265 0x1f008, 0x1f00c, 2266 0x1f040, 0x1f044, 2267 0x1f04c, 0x1f04c, 2268 0x1f284, 0x1f290, 2269 0x1f2c0, 0x1f2c0, 2270 0x1f2e0, 0x1f2e0, 2271 0x1f300, 0x1f384, 2272 0x1f3c0, 0x1f3c8, 2273 0x1f408, 0x1f40c, 2274 0x1f440, 0x1f444, 2275 0x1f44c, 0x1f44c, 2276 0x1f684, 0x1f690, 2277 0x1f6c0, 0x1f6c0, 2278 0x1f6e0, 0x1f6e0, 2279 0x1f700, 0x1f784, 2280 0x1f7c0, 0x1f7c8, 2281 0x1f808, 0x1f80c, 2282 0x1f840, 0x1f844, 2283 0x1f84c, 0x1f84c, 2284 0x1fa84, 0x1fa90, 2285 0x1fac0, 0x1fac0, 2286 0x1fae0, 0x1fae0, 2287 0x1fb00, 0x1fb84, 2288 0x1fbc0, 0x1fbc8, 2289 0x1fc08, 0x1fc0c, 2290 0x1fc40, 0x1fc44, 2291 0x1fc4c, 0x1fc4c, 2292 0x1fe84, 0x1fe90, 2293 0x1fec0, 0x1fec0, 2294 0x1fee0, 0x1fee0, 2295 0x1ff00, 0x1ff84, 2296 0x1ffc0, 0x1ffc8, 2297 0x30000, 0x30030, 2298 0x30100, 0x30168, 2299 0x30190, 0x301a0, 2300 0x301a8, 0x301b8, 2301 0x301c4, 0x301c8, 2302 0x301d0, 0x301d0, 2303 0x30200, 0x30320, 2304 0x30400, 0x304b4, 2305 0x304c0, 0x3052c, 2306 0x30540, 0x3061c, 2307 0x30800, 0x308a0, 2308 0x308c0, 0x30908, 2309 0x30910, 0x309b8, 2310 0x30a00, 0x30a04, 2311 0x30a0c, 0x30a14, 2312 0x30a1c, 0x30a2c, 2313 0x30a44, 0x30a50, 2314 0x30a74, 0x30a74, 2315 0x30a7c, 0x30afc, 2316 0x30b08, 0x30c24, 2317 0x30d00, 0x30d14, 2318 0x30d1c, 0x30d3c, 2319 0x30d44, 0x30d4c, 2320 0x30d54, 0x30d74, 2321 0x30d7c, 0x30d7c, 2322 0x30de0, 0x30de0, 2323 0x30e00, 0x30ed4, 2324 0x30f00, 0x30fa4, 2325 0x30fc0, 0x30fc4, 2326 0x31000, 0x31004, 2327 0x31080, 0x310fc, 2328 0x31208, 0x31220, 2329 0x3123c, 0x31254, 2330 0x31300, 0x31300, 2331 0x31308, 0x3131c, 2332 0x31338, 0x3133c, 2333 0x31380, 0x31380, 2334 0x31388, 0x313a8, 2335 0x313b4, 0x313b4, 2336 0x31400, 0x31420, 2337 0x31438, 0x3143c, 2338 0x31480, 0x31480, 2339 0x314a8, 0x314a8, 2340 0x314b0, 0x314b4, 2341 0x314c8, 0x314d4, 2342 0x31a40, 0x31a4c, 2343 0x31af0, 0x31b20, 2344 0x31b38, 0x31b3c, 2345 0x31b80, 0x31b80, 2346 0x31ba8, 0x31ba8, 2347 0x31bb0, 0x31bb4, 2348 0x31bc8, 0x31bd4, 2349 0x32140, 0x3218c, 2350 0x321f0, 0x321f4, 2351 0x32200, 0x32200, 2352 0x32218, 0x32218, 2353 0x32400, 0x32400, 2354 0x32408, 0x3241c, 2355 0x32618, 0x32620, 2356 0x32664, 0x32664, 2357 0x326a8, 0x326a8, 2358 0x326ec, 0x326ec, 2359 0x32a00, 0x32abc, 2360 0x32b00, 0x32b18, 2361 0x32b20, 0x32b38, 2362 0x32b40, 0x32b58, 2363 0x32b60, 0x32b78, 2364 0x32c00, 0x32c00, 2365 0x32c08, 0x32c3c, 2366 0x33000, 0x3302c, 2367 0x33034, 0x33050, 2368 0x33058, 0x33058, 2369 0x33060, 0x3308c, 2370 0x3309c, 0x330ac, 2371 0x330c0, 0x330c0, 2372 0x330c8, 0x330d0, 2373 0x330d8, 0x330e0, 2374 0x330ec, 0x3312c, 2375 0x33134, 0x33150, 2376 0x33158, 0x33158, 2377 0x33160, 0x3318c, 2378 0x3319c, 0x331ac, 2379 0x331c0, 0x331c0, 2380 0x331c8, 0x331d0, 2381 0x331d8, 0x331e0, 2382 0x331ec, 0x33290, 2383 0x33298, 0x332c4, 2384 0x332e4, 0x33390, 2385 0x33398, 0x333c4, 2386 0x333e4, 0x3342c, 2387 0x33434, 0x33450, 2388 0x33458, 0x33458, 2389 0x33460, 0x3348c, 2390 0x3349c, 0x334ac, 2391 0x334c0, 0x334c0, 2392 0x334c8, 0x334d0, 2393 0x334d8, 0x334e0, 2394 0x334ec, 0x3352c, 2395 0x33534, 0x33550, 2396 0x33558, 0x33558, 2397 0x33560, 0x3358c, 2398 0x3359c, 0x335ac, 2399 0x335c0, 0x335c0, 2400 0x335c8, 0x335d0, 2401 0x335d8, 0x335e0, 2402 0x335ec, 0x33690, 2403 0x33698, 0x336c4, 2404 0x336e4, 0x33790, 2405 0x33798, 0x337c4, 2406 0x337e4, 0x337fc, 2407 0x33814, 0x33814, 2408 0x33854, 0x33868, 2409 0x33880, 0x3388c, 2410 0x338c0, 0x338d0, 2411 0x338e8, 0x338ec, 2412 0x33900, 0x3392c, 2413 0x33934, 0x33950, 2414 0x33958, 0x33958, 2415 0x33960, 0x3398c, 2416 0x3399c, 0x339ac, 2417 0x339c0, 0x339c0, 2418 0x339c8, 0x339d0, 2419 0x339d8, 0x339e0, 2420 0x339ec, 0x33a90, 2421 0x33a98, 0x33ac4, 2422 0x33ae4, 0x33b10, 2423 0x33b24, 0x33b28, 2424 0x33b38, 0x33b50, 2425 0x33bf0, 0x33c10, 2426 0x33c24, 0x33c28, 2427 0x33c38, 0x33c50, 2428 0x33cf0, 0x33cfc, 2429 0x34000, 0x34030, 2430 0x34100, 0x34168, 2431 0x34190, 0x341a0, 2432 0x341a8, 0x341b8, 2433 0x341c4, 0x341c8, 2434 0x341d0, 0x341d0, 2435 0x34200, 0x34320, 2436 0x34400, 0x344b4, 2437 0x344c0, 0x3452c, 2438 0x34540, 0x3461c, 2439 0x34800, 0x348a0, 2440 0x348c0, 0x34908, 2441 0x34910, 0x349b8, 2442 0x34a00, 0x34a04, 2443 0x34a0c, 0x34a14, 2444 0x34a1c, 0x34a2c, 2445 0x34a44, 0x34a50, 2446 0x34a74, 0x34a74, 2447 0x34a7c, 0x34afc, 2448 0x34b08, 0x34c24, 2449 0x34d00, 0x34d14, 2450 0x34d1c, 0x34d3c, 2451 0x34d44, 0x34d4c, 2452 0x34d54, 0x34d74, 2453 0x34d7c, 0x34d7c, 2454 0x34de0, 0x34de0, 2455 0x34e00, 0x34ed4, 2456 0x34f00, 0x34fa4, 2457 0x34fc0, 0x34fc4, 2458 0x35000, 0x35004, 2459 0x35080, 0x350fc, 2460 0x35208, 0x35220, 2461 0x3523c, 0x35254, 2462 0x35300, 0x35300, 2463 0x35308, 0x3531c, 2464 0x35338, 0x3533c, 2465 0x35380, 0x35380, 2466 0x35388, 0x353a8, 2467 0x353b4, 0x353b4, 2468 0x35400, 0x35420, 2469 0x35438, 0x3543c, 2470 0x35480, 0x35480, 2471 0x354a8, 0x354a8, 2472 0x354b0, 0x354b4, 2473 0x354c8, 0x354d4, 2474 0x35a40, 0x35a4c, 2475 0x35af0, 0x35b20, 2476 0x35b38, 0x35b3c, 2477 0x35b80, 0x35b80, 2478 0x35ba8, 0x35ba8, 2479 0x35bb0, 0x35bb4, 2480 0x35bc8, 0x35bd4, 2481 0x36140, 0x3618c, 2482 0x361f0, 0x361f4, 2483 0x36200, 0x36200, 2484 0x36218, 0x36218, 2485 0x36400, 0x36400, 2486 0x36408, 0x3641c, 2487 0x36618, 0x36620, 2488 0x36664, 0x36664, 2489 0x366a8, 0x366a8, 2490 0x366ec, 0x366ec, 2491 0x36a00, 0x36abc, 2492 0x36b00, 0x36b18, 2493 0x36b20, 0x36b38, 2494 0x36b40, 0x36b58, 2495 0x36b60, 0x36b78, 2496 0x36c00, 0x36c00, 2497 0x36c08, 0x36c3c, 2498 0x37000, 0x3702c, 2499 0x37034, 0x37050, 2500 0x37058, 0x37058, 2501 0x37060, 0x3708c, 2502 0x3709c, 0x370ac, 2503 0x370c0, 0x370c0, 2504 0x370c8, 0x370d0, 2505 0x370d8, 0x370e0, 2506 0x370ec, 0x3712c, 2507 0x37134, 0x37150, 2508 0x37158, 0x37158, 2509 0x37160, 0x3718c, 2510 0x3719c, 0x371ac, 2511 0x371c0, 0x371c0, 2512 0x371c8, 0x371d0, 2513 0x371d8, 0x371e0, 2514 0x371ec, 0x37290, 2515 0x37298, 0x372c4, 2516 0x372e4, 0x37390, 2517 0x37398, 0x373c4, 2518 0x373e4, 0x3742c, 2519 0x37434, 0x37450, 2520 0x37458, 0x37458, 2521 0x37460, 0x3748c, 2522 0x3749c, 0x374ac, 2523 0x374c0, 0x374c0, 2524 0x374c8, 0x374d0, 2525 0x374d8, 0x374e0, 2526 0x374ec, 0x3752c, 2527 0x37534, 0x37550, 2528 0x37558, 0x37558, 2529 0x37560, 0x3758c, 2530 0x3759c, 0x375ac, 2531 0x375c0, 0x375c0, 2532 0x375c8, 0x375d0, 2533 0x375d8, 0x375e0, 2534 0x375ec, 0x37690, 2535 0x37698, 0x376c4, 2536 0x376e4, 0x37790, 2537 0x37798, 0x377c4, 2538 0x377e4, 0x377fc, 2539 0x37814, 0x37814, 2540 0x37854, 0x37868, 2541 0x37880, 0x3788c, 2542 0x378c0, 0x378d0, 2543 0x378e8, 0x378ec, 2544 0x37900, 0x3792c, 2545 0x37934, 0x37950, 2546 0x37958, 0x37958, 2547 0x37960, 0x3798c, 2548 0x3799c, 0x379ac, 2549 0x379c0, 0x379c0, 2550 0x379c8, 0x379d0, 2551 0x379d8, 0x379e0, 2552 0x379ec, 0x37a90, 2553 0x37a98, 0x37ac4, 2554 0x37ae4, 0x37b10, 2555 0x37b24, 0x37b28, 2556 0x37b38, 0x37b50, 2557 0x37bf0, 0x37c10, 2558 0x37c24, 0x37c28, 2559 0x37c38, 0x37c50, 2560 0x37cf0, 0x37cfc, 2561 0x40040, 0x40040, 2562 0x40080, 0x40084, 2563 0x40100, 0x40100, 2564 0x40140, 0x401bc, 2565 0x40200, 0x40214, 2566 0x40228, 0x40228, 2567 0x40240, 0x40258, 2568 0x40280, 0x40280, 2569 0x40304, 0x40304, 2570 0x40330, 0x4033c, 2571 0x41304, 0x413c8, 2572 0x413d0, 0x413dc, 2573 0x413f0, 0x413f0, 2574 0x41400, 0x4140c, 2575 0x41414, 0x4141c, 2576 0x41480, 0x414d0, 2577 0x44000, 0x4407c, 2578 0x440c0, 0x441ac, 2579 0x441b4, 0x4427c, 2580 0x442c0, 0x443ac, 2581 0x443b4, 0x4447c, 2582 0x444c0, 0x445ac, 2583 0x445b4, 0x4467c, 2584 0x446c0, 0x447ac, 2585 0x447b4, 0x4487c, 2586 0x448c0, 0x449ac, 2587 0x449b4, 0x44a7c, 2588 0x44ac0, 0x44bac, 2589 0x44bb4, 0x44c7c, 2590 0x44cc0, 0x44dac, 2591 0x44db4, 0x44e7c, 2592 0x44ec0, 0x44fac, 2593 0x44fb4, 0x4507c, 2594 0x450c0, 0x451ac, 2595 0x451b4, 0x451fc, 2596 0x45800, 0x45804, 2597 0x45810, 0x45830, 2598 0x45840, 0x45860, 2599 0x45868, 0x45868, 2600 0x45880, 0x45884, 2601 0x458a0, 0x458b0, 2602 0x45a00, 0x45a04, 2603 0x45a10, 0x45a30, 2604 0x45a40, 0x45a60, 2605 0x45a68, 0x45a68, 2606 0x45a80, 0x45a84, 2607 0x45aa0, 0x45ab0, 2608 0x460c0, 0x460e4, 2609 0x47000, 0x4703c, 2610 0x47044, 0x4708c, 2611 0x47200, 0x47250, 2612 0x47400, 0x47408, 2613 0x47414, 0x47420, 2614 0x47600, 0x47618, 2615 0x47800, 0x47814, 2616 0x47820, 0x4782c, 2617 0x50000, 0x50084, 2618 0x50090, 0x500cc, 2619 0x50300, 0x50384, 2620 0x50400, 0x50400, 2621 0x50800, 0x50884, 2622 0x50890, 0x508cc, 2623 0x50b00, 0x50b84, 2624 0x50c00, 0x50c00, 2625 0x51000, 0x51020, 2626 0x51028, 0x510b0, 2627 0x51300, 0x51324, 2628 }; 2629 2630 static const unsigned int t6vf_reg_ranges[] = { 2631 VF_SGE_REG(A_SGE_VF_KDOORBELL), VF_SGE_REG(A_SGE_VF_GTS), 2632 VF_MPS_REG(A_MPS_VF_CTL), 2633 VF_MPS_REG(A_MPS_VF_STAT_RX_VF_ERR_FRAMES_H), 2634 VF_PL_REG(A_PL_VF_WHOAMI), VF_PL_REG(A_PL_VF_REVISION), 2635 VF_CIM_REG(A_CIM_VF_EXT_MAILBOX_CTRL), 2636 VF_CIM_REG(A_CIM_VF_EXT_MAILBOX_STATUS), 2637 FW_T6VF_MBDATA_BASE_ADDR, 2638 FW_T6VF_MBDATA_BASE_ADDR + 2639 ((NUM_CIM_PF_MAILBOX_DATA_INSTANCES - 1) * 4), 2640 }; 2641 2642 u32 *buf_end = (u32 *)(buf + buf_size); 2643 const unsigned int *reg_ranges; 2644 int reg_ranges_size, range; 2645 unsigned int chip_version = chip_id(adap); 2646 2647 /* 2648 * Select the right set of register ranges to dump depending on the 2649 * adapter chip type. 2650 */ 2651 switch (chip_version) { 2652 case CHELSIO_T4: 2653 if (adap->flags & IS_VF) { 2654 reg_ranges = t4vf_reg_ranges; 2655 reg_ranges_size = ARRAY_SIZE(t4vf_reg_ranges); 2656 } else { 2657 reg_ranges = t4_reg_ranges; 2658 reg_ranges_size = ARRAY_SIZE(t4_reg_ranges); 2659 } 2660 break; 2661 2662 case CHELSIO_T5: 2663 if (adap->flags & IS_VF) { 2664 reg_ranges = t5vf_reg_ranges; 2665 reg_ranges_size = ARRAY_SIZE(t5vf_reg_ranges); 2666 } else { 2667 reg_ranges = t5_reg_ranges; 2668 reg_ranges_size = ARRAY_SIZE(t5_reg_ranges); 2669 } 2670 break; 2671 2672 case CHELSIO_T6: 2673 if (adap->flags & IS_VF) { 2674 reg_ranges = t6vf_reg_ranges; 2675 reg_ranges_size = ARRAY_SIZE(t6vf_reg_ranges); 2676 } else { 2677 reg_ranges = t6_reg_ranges; 2678 reg_ranges_size = ARRAY_SIZE(t6_reg_ranges); 2679 } 2680 break; 2681 2682 default: 2683 CH_ERR(adap, 2684 "Unsupported chip version %d\n", chip_version); 2685 return; 2686 } 2687 2688 /* 2689 * Clear the register buffer and insert the appropriate register 2690 * values selected by the above register ranges. 2691 */ 2692 memset(buf, 0, buf_size); 2693 for (range = 0; range < reg_ranges_size; range += 2) { 2694 unsigned int reg = reg_ranges[range]; 2695 unsigned int last_reg = reg_ranges[range + 1]; 2696 u32 *bufp = (u32 *)(buf + reg); 2697 2698 /* 2699 * Iterate across the register range filling in the register 2700 * buffer but don't write past the end of the register buffer. 2701 */ 2702 while (reg <= last_reg && bufp < buf_end) { 2703 *bufp++ = t4_read_reg(adap, reg); 2704 reg += sizeof(u32); 2705 } 2706 } 2707 } 2708 2709 /* 2710 * Partial EEPROM Vital Product Data structure. The VPD starts with one ID 2711 * header followed by one or more VPD-R sections, each with its own header. 2712 */ 2713 struct t4_vpd_hdr { 2714 u8 id_tag; 2715 u8 id_len[2]; 2716 u8 id_data[ID_LEN]; 2717 }; 2718 2719 struct t4_vpdr_hdr { 2720 u8 vpdr_tag; 2721 u8 vpdr_len[2]; 2722 }; 2723 2724 /* 2725 * EEPROM reads take a few tens of us while writes can take a bit over 5 ms. 2726 */ 2727 #define EEPROM_DELAY 10 /* 10us per poll spin */ 2728 #define EEPROM_MAX_POLL 5000 /* x 5000 == 50ms */ 2729 2730 #define EEPROM_STAT_ADDR 0x7bfc 2731 #define VPD_SIZE 0x800 2732 #define VPD_BASE 0x400 2733 #define VPD_BASE_OLD 0 2734 #define VPD_LEN 1024 2735 #define VPD_INFO_FLD_HDR_SIZE 3 2736 #define CHELSIO_VPD_UNIQUE_ID 0x82 2737 2738 /* 2739 * Small utility function to wait till any outstanding VPD Access is complete. 2740 * We have a per-adapter state variable "VPD Busy" to indicate when we have a 2741 * VPD Access in flight. This allows us to handle the problem of having a 2742 * previous VPD Access time out and prevent an attempt to inject a new VPD 2743 * Request before any in-flight VPD reguest has completed. 2744 */ 2745 static int t4_seeprom_wait(struct adapter *adapter) 2746 { 2747 unsigned int base = adapter->params.pci.vpd_cap_addr; 2748 int max_poll; 2749 2750 /* 2751 * If no VPD Access is in flight, we can just return success right 2752 * away. 2753 */ 2754 if (!adapter->vpd_busy) 2755 return 0; 2756 2757 /* 2758 * Poll the VPD Capability Address/Flag register waiting for it 2759 * to indicate that the operation is complete. 2760 */ 2761 max_poll = EEPROM_MAX_POLL; 2762 do { 2763 u16 val; 2764 2765 udelay(EEPROM_DELAY); 2766 t4_os_pci_read_cfg2(adapter, base + PCI_VPD_ADDR, &val); 2767 2768 /* 2769 * If the operation is complete, mark the VPD as no longer 2770 * busy and return success. 2771 */ 2772 if ((val & PCI_VPD_ADDR_F) == adapter->vpd_flag) { 2773 adapter->vpd_busy = 0; 2774 return 0; 2775 } 2776 } while (--max_poll); 2777 2778 /* 2779 * Failure! Note that we leave the VPD Busy status set in order to 2780 * avoid pushing a new VPD Access request into the VPD Capability till 2781 * the current operation eventually succeeds. It's a bug to issue a 2782 * new request when an existing request is in flight and will result 2783 * in corrupt hardware state. 2784 */ 2785 return -ETIMEDOUT; 2786 } 2787 2788 /** 2789 * t4_seeprom_read - read a serial EEPROM location 2790 * @adapter: adapter to read 2791 * @addr: EEPROM virtual address 2792 * @data: where to store the read data 2793 * 2794 * Read a 32-bit word from a location in serial EEPROM using the card's PCI 2795 * VPD capability. Note that this function must be called with a virtual 2796 * address. 2797 */ 2798 int t4_seeprom_read(struct adapter *adapter, u32 addr, u32 *data) 2799 { 2800 unsigned int base = adapter->params.pci.vpd_cap_addr; 2801 int ret; 2802 2803 /* 2804 * VPD Accesses must alway be 4-byte aligned! 2805 */ 2806 if (addr >= EEPROMVSIZE || (addr & 3)) 2807 return -EINVAL; 2808 2809 /* 2810 * Wait for any previous operation which may still be in flight to 2811 * complete. 2812 */ 2813 ret = t4_seeprom_wait(adapter); 2814 if (ret) { 2815 CH_ERR(adapter, "VPD still busy from previous operation\n"); 2816 return ret; 2817 } 2818 2819 /* 2820 * Issue our new VPD Read request, mark the VPD as being busy and wait 2821 * for our request to complete. If it doesn't complete, note the 2822 * error and return it to our caller. Note that we do not reset the 2823 * VPD Busy status! 2824 */ 2825 t4_os_pci_write_cfg2(adapter, base + PCI_VPD_ADDR, (u16)addr); 2826 adapter->vpd_busy = 1; 2827 adapter->vpd_flag = PCI_VPD_ADDR_F; 2828 ret = t4_seeprom_wait(adapter); 2829 if (ret) { 2830 CH_ERR(adapter, "VPD read of address %#x failed\n", addr); 2831 return ret; 2832 } 2833 2834 /* 2835 * Grab the returned data, swizzle it into our endianness and 2836 * return success. 2837 */ 2838 t4_os_pci_read_cfg4(adapter, base + PCI_VPD_DATA, data); 2839 *data = le32_to_cpu(*data); 2840 return 0; 2841 } 2842 2843 /** 2844 * t4_seeprom_write - write a serial EEPROM location 2845 * @adapter: adapter to write 2846 * @addr: virtual EEPROM address 2847 * @data: value to write 2848 * 2849 * Write a 32-bit word to a location in serial EEPROM using the card's PCI 2850 * VPD capability. Note that this function must be called with a virtual 2851 * address. 2852 */ 2853 int t4_seeprom_write(struct adapter *adapter, u32 addr, u32 data) 2854 { 2855 unsigned int base = adapter->params.pci.vpd_cap_addr; 2856 int ret; 2857 u32 stats_reg; 2858 int max_poll; 2859 2860 /* 2861 * VPD Accesses must alway be 4-byte aligned! 2862 */ 2863 if (addr >= EEPROMVSIZE || (addr & 3)) 2864 return -EINVAL; 2865 2866 /* 2867 * Wait for any previous operation which may still be in flight to 2868 * complete. 2869 */ 2870 ret = t4_seeprom_wait(adapter); 2871 if (ret) { 2872 CH_ERR(adapter, "VPD still busy from previous operation\n"); 2873 return ret; 2874 } 2875 2876 /* 2877 * Issue our new VPD Read request, mark the VPD as being busy and wait 2878 * for our request to complete. If it doesn't complete, note the 2879 * error and return it to our caller. Note that we do not reset the 2880 * VPD Busy status! 2881 */ 2882 t4_os_pci_write_cfg4(adapter, base + PCI_VPD_DATA, 2883 cpu_to_le32(data)); 2884 t4_os_pci_write_cfg2(adapter, base + PCI_VPD_ADDR, 2885 (u16)addr | PCI_VPD_ADDR_F); 2886 adapter->vpd_busy = 1; 2887 adapter->vpd_flag = 0; 2888 ret = t4_seeprom_wait(adapter); 2889 if (ret) { 2890 CH_ERR(adapter, "VPD write of address %#x failed\n", addr); 2891 return ret; 2892 } 2893 2894 /* 2895 * Reset PCI_VPD_DATA register after a transaction and wait for our 2896 * request to complete. If it doesn't complete, return error. 2897 */ 2898 t4_os_pci_write_cfg4(adapter, base + PCI_VPD_DATA, 0); 2899 max_poll = EEPROM_MAX_POLL; 2900 do { 2901 udelay(EEPROM_DELAY); 2902 t4_seeprom_read(adapter, EEPROM_STAT_ADDR, &stats_reg); 2903 } while ((stats_reg & 0x1) && --max_poll); 2904 if (!max_poll) 2905 return -ETIMEDOUT; 2906 2907 /* Return success! */ 2908 return 0; 2909 } 2910 2911 /** 2912 * t4_eeprom_ptov - translate a physical EEPROM address to virtual 2913 * @phys_addr: the physical EEPROM address 2914 * @fn: the PCI function number 2915 * @sz: size of function-specific area 2916 * 2917 * Translate a physical EEPROM address to virtual. The first 1K is 2918 * accessed through virtual addresses starting at 31K, the rest is 2919 * accessed through virtual addresses starting at 0. 2920 * 2921 * The mapping is as follows: 2922 * [0..1K) -> [31K..32K) 2923 * [1K..1K+A) -> [ES-A..ES) 2924 * [1K+A..ES) -> [0..ES-A-1K) 2925 * 2926 * where A = @fn * @sz, and ES = EEPROM size. 2927 */ 2928 int t4_eeprom_ptov(unsigned int phys_addr, unsigned int fn, unsigned int sz) 2929 { 2930 fn *= sz; 2931 if (phys_addr < 1024) 2932 return phys_addr + (31 << 10); 2933 if (phys_addr < 1024 + fn) 2934 return EEPROMSIZE - fn + phys_addr - 1024; 2935 if (phys_addr < EEPROMSIZE) 2936 return phys_addr - 1024 - fn; 2937 return -EINVAL; 2938 } 2939 2940 /** 2941 * t4_seeprom_wp - enable/disable EEPROM write protection 2942 * @adapter: the adapter 2943 * @enable: whether to enable or disable write protection 2944 * 2945 * Enables or disables write protection on the serial EEPROM. 2946 */ 2947 int t4_seeprom_wp(struct adapter *adapter, int enable) 2948 { 2949 return t4_seeprom_write(adapter, EEPROM_STAT_ADDR, enable ? 0xc : 0); 2950 } 2951 2952 /** 2953 * get_vpd_keyword_val - Locates an information field keyword in the VPD 2954 * @vpd: Pointer to buffered vpd data structure 2955 * @kw: The keyword to search for 2956 * @region: VPD region to search (starting from 0) 2957 * 2958 * Returns the value of the information field keyword or 2959 * -ENOENT otherwise. 2960 */ 2961 static int get_vpd_keyword_val(const u8 *vpd, const char *kw, int region) 2962 { 2963 int i, tag; 2964 unsigned int offset, len; 2965 const struct t4_vpdr_hdr *vpdr; 2966 2967 offset = sizeof(struct t4_vpd_hdr); 2968 vpdr = (const void *)(vpd + offset); 2969 tag = vpdr->vpdr_tag; 2970 len = (u16)vpdr->vpdr_len[0] + ((u16)vpdr->vpdr_len[1] << 8); 2971 while (region--) { 2972 offset += sizeof(struct t4_vpdr_hdr) + len; 2973 vpdr = (const void *)(vpd + offset); 2974 if (++tag != vpdr->vpdr_tag) 2975 return -ENOENT; 2976 len = (u16)vpdr->vpdr_len[0] + ((u16)vpdr->vpdr_len[1] << 8); 2977 } 2978 offset += sizeof(struct t4_vpdr_hdr); 2979 2980 if (offset + len > VPD_LEN) { 2981 return -ENOENT; 2982 } 2983 2984 for (i = offset; i + VPD_INFO_FLD_HDR_SIZE <= offset + len;) { 2985 if (memcmp(vpd + i , kw , 2) == 0){ 2986 i += VPD_INFO_FLD_HDR_SIZE; 2987 return i; 2988 } 2989 2990 i += VPD_INFO_FLD_HDR_SIZE + vpd[i+2]; 2991 } 2992 2993 return -ENOENT; 2994 } 2995 2996 2997 /** 2998 * get_vpd_params - read VPD parameters from VPD EEPROM 2999 * @adapter: adapter to read 3000 * @p: where to store the parameters 3001 * @vpd: caller provided temporary space to read the VPD into 3002 * 3003 * Reads card parameters stored in VPD EEPROM. 3004 */ 3005 static int get_vpd_params(struct adapter *adapter, struct vpd_params *p, 3006 uint16_t device_id, u32 *buf) 3007 { 3008 int i, ret, addr; 3009 int ec, sn, pn, na, md; 3010 u8 csum; 3011 const u8 *vpd = (const u8 *)buf; 3012 3013 /* 3014 * Card information normally starts at VPD_BASE but early cards had 3015 * it at 0. 3016 */ 3017 ret = t4_seeprom_read(adapter, VPD_BASE, buf); 3018 if (ret) 3019 return (ret); 3020 3021 /* 3022 * The VPD shall have a unique identifier specified by the PCI SIG. 3023 * For chelsio adapters, the identifier is 0x82. The first byte of a VPD 3024 * shall be CHELSIO_VPD_UNIQUE_ID (0x82). The VPD programming software 3025 * is expected to automatically put this entry at the 3026 * beginning of the VPD. 3027 */ 3028 addr = *vpd == CHELSIO_VPD_UNIQUE_ID ? VPD_BASE : VPD_BASE_OLD; 3029 3030 for (i = 0; i < VPD_LEN; i += 4) { 3031 ret = t4_seeprom_read(adapter, addr + i, buf++); 3032 if (ret) 3033 return ret; 3034 } 3035 3036 #define FIND_VPD_KW(var,name) do { \ 3037 var = get_vpd_keyword_val(vpd, name, 0); \ 3038 if (var < 0) { \ 3039 CH_ERR(adapter, "missing VPD keyword " name "\n"); \ 3040 return -EINVAL; \ 3041 } \ 3042 } while (0) 3043 3044 FIND_VPD_KW(i, "RV"); 3045 for (csum = 0; i >= 0; i--) 3046 csum += vpd[i]; 3047 3048 if (csum) { 3049 CH_ERR(adapter, 3050 "corrupted VPD EEPROM, actual csum %u\n", csum); 3051 return -EINVAL; 3052 } 3053 3054 FIND_VPD_KW(ec, "EC"); 3055 FIND_VPD_KW(sn, "SN"); 3056 FIND_VPD_KW(pn, "PN"); 3057 FIND_VPD_KW(na, "NA"); 3058 #undef FIND_VPD_KW 3059 3060 memcpy(p->id, vpd + offsetof(struct t4_vpd_hdr, id_data), ID_LEN); 3061 strstrip(p->id); 3062 memcpy(p->ec, vpd + ec, EC_LEN); 3063 strstrip(p->ec); 3064 i = vpd[sn - VPD_INFO_FLD_HDR_SIZE + 2]; 3065 memcpy(p->sn, vpd + sn, min(i, SERNUM_LEN)); 3066 strstrip(p->sn); 3067 i = vpd[pn - VPD_INFO_FLD_HDR_SIZE + 2]; 3068 memcpy(p->pn, vpd + pn, min(i, PN_LEN)); 3069 strstrip((char *)p->pn); 3070 i = vpd[na - VPD_INFO_FLD_HDR_SIZE + 2]; 3071 memcpy(p->na, vpd + na, min(i, MACADDR_LEN)); 3072 strstrip((char *)p->na); 3073 3074 if (device_id & 0x80) 3075 return 0; /* Custom card */ 3076 3077 md = get_vpd_keyword_val(vpd, "VF", 1); 3078 if (md < 0) { 3079 snprintf(p->md, sizeof(p->md), "unknown"); 3080 } else { 3081 i = vpd[md - VPD_INFO_FLD_HDR_SIZE + 2]; 3082 memcpy(p->md, vpd + md, min(i, MD_LEN)); 3083 strstrip((char *)p->md); 3084 } 3085 3086 return 0; 3087 } 3088 3089 /* serial flash and firmware constants and flash config file constants */ 3090 enum { 3091 SF_ATTEMPTS = 10, /* max retries for SF operations */ 3092 3093 /* flash command opcodes */ 3094 SF_PROG_PAGE = 2, /* program 256B page */ 3095 SF_WR_DISABLE = 4, /* disable writes */ 3096 SF_RD_STATUS = 5, /* read status register */ 3097 SF_WR_ENABLE = 6, /* enable writes */ 3098 SF_RD_DATA_FAST = 0xb, /* read flash */ 3099 SF_RD_ID = 0x9f, /* read ID */ 3100 SF_ERASE_SECTOR = 0xd8, /* erase 64KB sector */ 3101 }; 3102 3103 /** 3104 * sf1_read - read data from the serial flash 3105 * @adapter: the adapter 3106 * @byte_cnt: number of bytes to read 3107 * @cont: whether another operation will be chained 3108 * @lock: whether to lock SF for PL access only 3109 * @valp: where to store the read data 3110 * 3111 * Reads up to 4 bytes of data from the serial flash. The location of 3112 * the read needs to be specified prior to calling this by issuing the 3113 * appropriate commands to the serial flash. 3114 */ 3115 static int sf1_read(struct adapter *adapter, unsigned int byte_cnt, int cont, 3116 int lock, u32 *valp) 3117 { 3118 int ret; 3119 3120 if (!byte_cnt || byte_cnt > 4) 3121 return -EINVAL; 3122 if (t4_read_reg(adapter, A_SF_OP) & F_BUSY) 3123 return -EBUSY; 3124 t4_write_reg(adapter, A_SF_OP, 3125 V_SF_LOCK(lock) | V_CONT(cont) | V_BYTECNT(byte_cnt - 1)); 3126 ret = t4_wait_op_done(adapter, A_SF_OP, F_BUSY, 0, SF_ATTEMPTS, 5); 3127 if (!ret) 3128 *valp = t4_read_reg(adapter, A_SF_DATA); 3129 return ret; 3130 } 3131 3132 /** 3133 * sf1_write - write data to the serial flash 3134 * @adapter: the adapter 3135 * @byte_cnt: number of bytes to write 3136 * @cont: whether another operation will be chained 3137 * @lock: whether to lock SF for PL access only 3138 * @val: value to write 3139 * 3140 * Writes up to 4 bytes of data to the serial flash. The location of 3141 * the write needs to be specified prior to calling this by issuing the 3142 * appropriate commands to the serial flash. 3143 */ 3144 static int sf1_write(struct adapter *adapter, unsigned int byte_cnt, int cont, 3145 int lock, u32 val) 3146 { 3147 if (!byte_cnt || byte_cnt > 4) 3148 return -EINVAL; 3149 if (t4_read_reg(adapter, A_SF_OP) & F_BUSY) 3150 return -EBUSY; 3151 t4_write_reg(adapter, A_SF_DATA, val); 3152 t4_write_reg(adapter, A_SF_OP, V_SF_LOCK(lock) | 3153 V_CONT(cont) | V_BYTECNT(byte_cnt - 1) | V_OP(1)); 3154 return t4_wait_op_done(adapter, A_SF_OP, F_BUSY, 0, SF_ATTEMPTS, 5); 3155 } 3156 3157 /** 3158 * flash_wait_op - wait for a flash operation to complete 3159 * @adapter: the adapter 3160 * @attempts: max number of polls of the status register 3161 * @delay: delay between polls in ms 3162 * 3163 * Wait for a flash operation to complete by polling the status register. 3164 */ 3165 static int flash_wait_op(struct adapter *adapter, int attempts, int delay) 3166 { 3167 int ret; 3168 u32 status; 3169 3170 while (1) { 3171 if ((ret = sf1_write(adapter, 1, 1, 1, SF_RD_STATUS)) != 0 || 3172 (ret = sf1_read(adapter, 1, 0, 1, &status)) != 0) 3173 return ret; 3174 if (!(status & 1)) 3175 return 0; 3176 if (--attempts == 0) 3177 return -EAGAIN; 3178 if (delay) 3179 msleep(delay); 3180 } 3181 } 3182 3183 /** 3184 * t4_read_flash - read words from serial flash 3185 * @adapter: the adapter 3186 * @addr: the start address for the read 3187 * @nwords: how many 32-bit words to read 3188 * @data: where to store the read data 3189 * @byte_oriented: whether to store data as bytes or as words 3190 * 3191 * Read the specified number of 32-bit words from the serial flash. 3192 * If @byte_oriented is set the read data is stored as a byte array 3193 * (i.e., big-endian), otherwise as 32-bit words in the platform's 3194 * natural endianness. 3195 */ 3196 int t4_read_flash(struct adapter *adapter, unsigned int addr, 3197 unsigned int nwords, u32 *data, int byte_oriented) 3198 { 3199 int ret; 3200 3201 if (addr + nwords * sizeof(u32) > adapter->params.sf_size || (addr & 3)) 3202 return -EINVAL; 3203 3204 addr = swab32(addr) | SF_RD_DATA_FAST; 3205 3206 if ((ret = sf1_write(adapter, 4, 1, 0, addr)) != 0 || 3207 (ret = sf1_read(adapter, 1, 1, 0, data)) != 0) 3208 return ret; 3209 3210 for ( ; nwords; nwords--, data++) { 3211 ret = sf1_read(adapter, 4, nwords > 1, nwords == 1, data); 3212 if (nwords == 1) 3213 t4_write_reg(adapter, A_SF_OP, 0); /* unlock SF */ 3214 if (ret) 3215 return ret; 3216 if (byte_oriented) 3217 *data = (__force __u32)(cpu_to_be32(*data)); 3218 } 3219 return 0; 3220 } 3221 3222 /** 3223 * t4_write_flash - write up to a page of data to the serial flash 3224 * @adapter: the adapter 3225 * @addr: the start address to write 3226 * @n: length of data to write in bytes 3227 * @data: the data to write 3228 * @byte_oriented: whether to store data as bytes or as words 3229 * 3230 * Writes up to a page of data (256 bytes) to the serial flash starting 3231 * at the given address. All the data must be written to the same page. 3232 * If @byte_oriented is set the write data is stored as byte stream 3233 * (i.e. matches what on disk), otherwise in big-endian. 3234 */ 3235 int t4_write_flash(struct adapter *adapter, unsigned int addr, 3236 unsigned int n, const u8 *data, int byte_oriented) 3237 { 3238 int ret; 3239 u32 buf[SF_PAGE_SIZE / 4]; 3240 unsigned int i, c, left, val, offset = addr & 0xff; 3241 3242 if (addr >= adapter->params.sf_size || offset + n > SF_PAGE_SIZE) 3243 return -EINVAL; 3244 3245 val = swab32(addr) | SF_PROG_PAGE; 3246 3247 if ((ret = sf1_write(adapter, 1, 0, 1, SF_WR_ENABLE)) != 0 || 3248 (ret = sf1_write(adapter, 4, 1, 1, val)) != 0) 3249 goto unlock; 3250 3251 for (left = n; left; left -= c) { 3252 c = min(left, 4U); 3253 for (val = 0, i = 0; i < c; ++i) 3254 val = (val << 8) + *data++; 3255 3256 if (!byte_oriented) 3257 val = cpu_to_be32(val); 3258 3259 ret = sf1_write(adapter, c, c != left, 1, val); 3260 if (ret) 3261 goto unlock; 3262 } 3263 ret = flash_wait_op(adapter, 8, 1); 3264 if (ret) 3265 goto unlock; 3266 3267 t4_write_reg(adapter, A_SF_OP, 0); /* unlock SF */ 3268 3269 /* Read the page to verify the write succeeded */ 3270 ret = t4_read_flash(adapter, addr & ~0xff, ARRAY_SIZE(buf), buf, 3271 byte_oriented); 3272 if (ret) 3273 return ret; 3274 3275 if (memcmp(data - n, (u8 *)buf + offset, n)) { 3276 CH_ERR(adapter, 3277 "failed to correctly write the flash page at %#x\n", 3278 addr); 3279 return -EIO; 3280 } 3281 return 0; 3282 3283 unlock: 3284 t4_write_reg(adapter, A_SF_OP, 0); /* unlock SF */ 3285 return ret; 3286 } 3287 3288 /** 3289 * t4_get_fw_version - read the firmware version 3290 * @adapter: the adapter 3291 * @vers: where to place the version 3292 * 3293 * Reads the FW version from flash. 3294 */ 3295 int t4_get_fw_version(struct adapter *adapter, u32 *vers) 3296 { 3297 return t4_read_flash(adapter, FLASH_FW_START + 3298 offsetof(struct fw_hdr, fw_ver), 1, 3299 vers, 0); 3300 } 3301 3302 /** 3303 * t4_get_fw_hdr - read the firmware header 3304 * @adapter: the adapter 3305 * @hdr: where to place the version 3306 * 3307 * Reads the FW header from flash into caller provided buffer. 3308 */ 3309 int t4_get_fw_hdr(struct adapter *adapter, struct fw_hdr *hdr) 3310 { 3311 return t4_read_flash(adapter, FLASH_FW_START, 3312 sizeof (*hdr) / sizeof (uint32_t), (uint32_t *)hdr, 1); 3313 } 3314 3315 /** 3316 * t4_get_bs_version - read the firmware bootstrap version 3317 * @adapter: the adapter 3318 * @vers: where to place the version 3319 * 3320 * Reads the FW Bootstrap version from flash. 3321 */ 3322 int t4_get_bs_version(struct adapter *adapter, u32 *vers) 3323 { 3324 return t4_read_flash(adapter, FLASH_FWBOOTSTRAP_START + 3325 offsetof(struct fw_hdr, fw_ver), 1, 3326 vers, 0); 3327 } 3328 3329 /** 3330 * t4_get_tp_version - read the TP microcode version 3331 * @adapter: the adapter 3332 * @vers: where to place the version 3333 * 3334 * Reads the TP microcode version from flash. 3335 */ 3336 int t4_get_tp_version(struct adapter *adapter, u32 *vers) 3337 { 3338 return t4_read_flash(adapter, FLASH_FW_START + 3339 offsetof(struct fw_hdr, tp_microcode_ver), 3340 1, vers, 0); 3341 } 3342 3343 /** 3344 * t4_get_exprom_version - return the Expansion ROM version (if any) 3345 * @adapter: the adapter 3346 * @vers: where to place the version 3347 * 3348 * Reads the Expansion ROM header from FLASH and returns the version 3349 * number (if present) through the @vers return value pointer. We return 3350 * this in the Firmware Version Format since it's convenient. Return 3351 * 0 on success, -ENOENT if no Expansion ROM is present. 3352 */ 3353 int t4_get_exprom_version(struct adapter *adapter, u32 *vers) 3354 { 3355 struct exprom_header { 3356 unsigned char hdr_arr[16]; /* must start with 0x55aa */ 3357 unsigned char hdr_ver[4]; /* Expansion ROM version */ 3358 } *hdr; 3359 u32 exprom_header_buf[DIV_ROUND_UP(sizeof(struct exprom_header), 3360 sizeof(u32))]; 3361 int ret; 3362 3363 ret = t4_read_flash(adapter, FLASH_EXP_ROM_START, 3364 ARRAY_SIZE(exprom_header_buf), exprom_header_buf, 3365 0); 3366 if (ret) 3367 return ret; 3368 3369 hdr = (struct exprom_header *)exprom_header_buf; 3370 if (hdr->hdr_arr[0] != 0x55 || hdr->hdr_arr[1] != 0xaa) 3371 return -ENOENT; 3372 3373 *vers = (V_FW_HDR_FW_VER_MAJOR(hdr->hdr_ver[0]) | 3374 V_FW_HDR_FW_VER_MINOR(hdr->hdr_ver[1]) | 3375 V_FW_HDR_FW_VER_MICRO(hdr->hdr_ver[2]) | 3376 V_FW_HDR_FW_VER_BUILD(hdr->hdr_ver[3])); 3377 return 0; 3378 } 3379 3380 /** 3381 * t4_get_scfg_version - return the Serial Configuration version 3382 * @adapter: the adapter 3383 * @vers: where to place the version 3384 * 3385 * Reads the Serial Configuration Version via the Firmware interface 3386 * (thus this can only be called once we're ready to issue Firmware 3387 * commands). The format of the Serial Configuration version is 3388 * adapter specific. Returns 0 on success, an error on failure. 3389 * 3390 * Note that early versions of the Firmware didn't include the ability 3391 * to retrieve the Serial Configuration version, so we zero-out the 3392 * return-value parameter in that case to avoid leaving it with 3393 * garbage in it. 3394 * 3395 * Also note that the Firmware will return its cached copy of the Serial 3396 * Initialization Revision ID, not the actual Revision ID as written in 3397 * the Serial EEPROM. This is only an issue if a new VPD has been written 3398 * and the Firmware/Chip haven't yet gone through a RESET sequence. So 3399 * it's best to defer calling this routine till after a FW_RESET_CMD has 3400 * been issued if the Host Driver will be performing a full adapter 3401 * initialization. 3402 */ 3403 int t4_get_scfg_version(struct adapter *adapter, u32 *vers) 3404 { 3405 u32 scfgrev_param; 3406 int ret; 3407 3408 scfgrev_param = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | 3409 V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_SCFGREV)); 3410 ret = t4_query_params(adapter, adapter->mbox, adapter->pf, 0, 3411 1, &scfgrev_param, vers); 3412 if (ret) 3413 *vers = 0; 3414 return ret; 3415 } 3416 3417 /** 3418 * t4_get_vpd_version - return the VPD version 3419 * @adapter: the adapter 3420 * @vers: where to place the version 3421 * 3422 * Reads the VPD via the Firmware interface (thus this can only be called 3423 * once we're ready to issue Firmware commands). The format of the 3424 * VPD version is adapter specific. Returns 0 on success, an error on 3425 * failure. 3426 * 3427 * Note that early versions of the Firmware didn't include the ability 3428 * to retrieve the VPD version, so we zero-out the return-value parameter 3429 * in that case to avoid leaving it with garbage in it. 3430 * 3431 * Also note that the Firmware will return its cached copy of the VPD 3432 * Revision ID, not the actual Revision ID as written in the Serial 3433 * EEPROM. This is only an issue if a new VPD has been written and the 3434 * Firmware/Chip haven't yet gone through a RESET sequence. So it's best 3435 * to defer calling this routine till after a FW_RESET_CMD has been issued 3436 * if the Host Driver will be performing a full adapter initialization. 3437 */ 3438 int t4_get_vpd_version(struct adapter *adapter, u32 *vers) 3439 { 3440 u32 vpdrev_param; 3441 int ret; 3442 3443 vpdrev_param = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | 3444 V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_VPDREV)); 3445 ret = t4_query_params(adapter, adapter->mbox, adapter->pf, 0, 3446 1, &vpdrev_param, vers); 3447 if (ret) 3448 *vers = 0; 3449 return ret; 3450 } 3451 3452 /** 3453 * t4_get_version_info - extract various chip/firmware version information 3454 * @adapter: the adapter 3455 * 3456 * Reads various chip/firmware version numbers and stores them into the 3457 * adapter Adapter Parameters structure. If any of the efforts fails 3458 * the first failure will be returned, but all of the version numbers 3459 * will be read. 3460 */ 3461 int t4_get_version_info(struct adapter *adapter) 3462 { 3463 int ret = 0; 3464 3465 #define FIRST_RET(__getvinfo) \ 3466 do { \ 3467 int __ret = __getvinfo; \ 3468 if (__ret && !ret) \ 3469 ret = __ret; \ 3470 } while (0) 3471 3472 FIRST_RET(t4_get_fw_version(adapter, &adapter->params.fw_vers)); 3473 FIRST_RET(t4_get_bs_version(adapter, &adapter->params.bs_vers)); 3474 FIRST_RET(t4_get_tp_version(adapter, &adapter->params.tp_vers)); 3475 FIRST_RET(t4_get_exprom_version(adapter, &adapter->params.er_vers)); 3476 FIRST_RET(t4_get_scfg_version(adapter, &adapter->params.scfg_vers)); 3477 FIRST_RET(t4_get_vpd_version(adapter, &adapter->params.vpd_vers)); 3478 3479 #undef FIRST_RET 3480 3481 return ret; 3482 } 3483 3484 /** 3485 * t4_flash_erase_sectors - erase a range of flash sectors 3486 * @adapter: the adapter 3487 * @start: the first sector to erase 3488 * @end: the last sector to erase 3489 * 3490 * Erases the sectors in the given inclusive range. 3491 */ 3492 int t4_flash_erase_sectors(struct adapter *adapter, int start, int end) 3493 { 3494 int ret = 0; 3495 3496 if (end >= adapter->params.sf_nsec) 3497 return -EINVAL; 3498 3499 while (start <= end) { 3500 if ((ret = sf1_write(adapter, 1, 0, 1, SF_WR_ENABLE)) != 0 || 3501 (ret = sf1_write(adapter, 4, 0, 1, 3502 SF_ERASE_SECTOR | (start << 8))) != 0 || 3503 (ret = flash_wait_op(adapter, 14, 500)) != 0) { 3504 CH_ERR(adapter, 3505 "erase of flash sector %d failed, error %d\n", 3506 start, ret); 3507 break; 3508 } 3509 start++; 3510 } 3511 t4_write_reg(adapter, A_SF_OP, 0); /* unlock SF */ 3512 return ret; 3513 } 3514 3515 /** 3516 * t4_flash_cfg_addr - return the address of the flash configuration file 3517 * @adapter: the adapter 3518 * 3519 * Return the address within the flash where the Firmware Configuration 3520 * File is stored, or an error if the device FLASH is too small to contain 3521 * a Firmware Configuration File. 3522 */ 3523 int t4_flash_cfg_addr(struct adapter *adapter) 3524 { 3525 /* 3526 * If the device FLASH isn't large enough to hold a Firmware 3527 * Configuration File, return an error. 3528 */ 3529 if (adapter->params.sf_size < FLASH_CFG_START + FLASH_CFG_MAX_SIZE) 3530 return -ENOSPC; 3531 3532 return FLASH_CFG_START; 3533 } 3534 3535 /* 3536 * Return TRUE if the specified firmware matches the adapter. I.e. T4 3537 * firmware for T4 adapters, T5 firmware for T5 adapters, etc. We go ahead 3538 * and emit an error message for mismatched firmware to save our caller the 3539 * effort ... 3540 */ 3541 static int t4_fw_matches_chip(struct adapter *adap, 3542 const struct fw_hdr *hdr) 3543 { 3544 /* 3545 * The expression below will return FALSE for any unsupported adapter 3546 * which will keep us "honest" in the future ... 3547 */ 3548 if ((is_t4(adap) && hdr->chip == FW_HDR_CHIP_T4) || 3549 (is_t5(adap) && hdr->chip == FW_HDR_CHIP_T5) || 3550 (is_t6(adap) && hdr->chip == FW_HDR_CHIP_T6)) 3551 return 1; 3552 3553 CH_ERR(adap, 3554 "FW image (%d) is not suitable for this adapter (%d)\n", 3555 hdr->chip, chip_id(adap)); 3556 return 0; 3557 } 3558 3559 /** 3560 * t4_load_fw - download firmware 3561 * @adap: the adapter 3562 * @fw_data: the firmware image to write 3563 * @size: image size 3564 * 3565 * Write the supplied firmware image to the card's serial flash. 3566 */ 3567 int t4_load_fw(struct adapter *adap, const u8 *fw_data, unsigned int size) 3568 { 3569 u32 csum; 3570 int ret, addr; 3571 unsigned int i; 3572 u8 first_page[SF_PAGE_SIZE]; 3573 const u32 *p = (const u32 *)fw_data; 3574 const struct fw_hdr *hdr = (const struct fw_hdr *)fw_data; 3575 unsigned int sf_sec_size = adap->params.sf_size / adap->params.sf_nsec; 3576 unsigned int fw_start_sec; 3577 unsigned int fw_start; 3578 unsigned int fw_size; 3579 3580 if (ntohl(hdr->magic) == FW_HDR_MAGIC_BOOTSTRAP) { 3581 fw_start_sec = FLASH_FWBOOTSTRAP_START_SEC; 3582 fw_start = FLASH_FWBOOTSTRAP_START; 3583 fw_size = FLASH_FWBOOTSTRAP_MAX_SIZE; 3584 } else { 3585 fw_start_sec = FLASH_FW_START_SEC; 3586 fw_start = FLASH_FW_START; 3587 fw_size = FLASH_FW_MAX_SIZE; 3588 } 3589 3590 if (!size) { 3591 CH_ERR(adap, "FW image has no data\n"); 3592 return -EINVAL; 3593 } 3594 if (size & 511) { 3595 CH_ERR(adap, 3596 "FW image size not multiple of 512 bytes\n"); 3597 return -EINVAL; 3598 } 3599 if ((unsigned int) be16_to_cpu(hdr->len512) * 512 != size) { 3600 CH_ERR(adap, 3601 "FW image size differs from size in FW header\n"); 3602 return -EINVAL; 3603 } 3604 if (size > fw_size) { 3605 CH_ERR(adap, "FW image too large, max is %u bytes\n", 3606 fw_size); 3607 return -EFBIG; 3608 } 3609 if (!t4_fw_matches_chip(adap, hdr)) 3610 return -EINVAL; 3611 3612 for (csum = 0, i = 0; i < size / sizeof(csum); i++) 3613 csum += be32_to_cpu(p[i]); 3614 3615 if (csum != 0xffffffff) { 3616 CH_ERR(adap, 3617 "corrupted firmware image, checksum %#x\n", csum); 3618 return -EINVAL; 3619 } 3620 3621 i = DIV_ROUND_UP(size, sf_sec_size); /* # of sectors spanned */ 3622 ret = t4_flash_erase_sectors(adap, fw_start_sec, fw_start_sec + i - 1); 3623 if (ret) 3624 goto out; 3625 3626 /* 3627 * We write the correct version at the end so the driver can see a bad 3628 * version if the FW write fails. Start by writing a copy of the 3629 * first page with a bad version. 3630 */ 3631 memcpy(first_page, fw_data, SF_PAGE_SIZE); 3632 ((struct fw_hdr *)first_page)->fw_ver = cpu_to_be32(0xffffffff); 3633 ret = t4_write_flash(adap, fw_start, SF_PAGE_SIZE, first_page, 1); 3634 if (ret) 3635 goto out; 3636 3637 addr = fw_start; 3638 for (size -= SF_PAGE_SIZE; size; size -= SF_PAGE_SIZE) { 3639 addr += SF_PAGE_SIZE; 3640 fw_data += SF_PAGE_SIZE; 3641 ret = t4_write_flash(adap, addr, SF_PAGE_SIZE, fw_data, 1); 3642 if (ret) 3643 goto out; 3644 } 3645 3646 ret = t4_write_flash(adap, 3647 fw_start + offsetof(struct fw_hdr, fw_ver), 3648 sizeof(hdr->fw_ver), (const u8 *)&hdr->fw_ver, 1); 3649 out: 3650 if (ret) 3651 CH_ERR(adap, "firmware download failed, error %d\n", 3652 ret); 3653 return ret; 3654 } 3655 3656 /** 3657 * t4_fwcache - firmware cache operation 3658 * @adap: the adapter 3659 * @op : the operation (flush or flush and invalidate) 3660 */ 3661 int t4_fwcache(struct adapter *adap, enum fw_params_param_dev_fwcache op) 3662 { 3663 struct fw_params_cmd c; 3664 3665 memset(&c, 0, sizeof(c)); 3666 c.op_to_vfn = 3667 cpu_to_be32(V_FW_CMD_OP(FW_PARAMS_CMD) | 3668 F_FW_CMD_REQUEST | F_FW_CMD_WRITE | 3669 V_FW_PARAMS_CMD_PFN(adap->pf) | 3670 V_FW_PARAMS_CMD_VFN(0)); 3671 c.retval_len16 = cpu_to_be32(FW_LEN16(c)); 3672 c.param[0].mnem = 3673 cpu_to_be32(V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | 3674 V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_FWCACHE)); 3675 c.param[0].val = (__force __be32)op; 3676 3677 return t4_wr_mbox(adap, adap->mbox, &c, sizeof(c), NULL); 3678 } 3679 3680 void t4_cim_read_pif_la(struct adapter *adap, u32 *pif_req, u32 *pif_rsp, 3681 unsigned int *pif_req_wrptr, 3682 unsigned int *pif_rsp_wrptr) 3683 { 3684 int i, j; 3685 u32 cfg, val, req, rsp; 3686 3687 cfg = t4_read_reg(adap, A_CIM_DEBUGCFG); 3688 if (cfg & F_LADBGEN) 3689 t4_write_reg(adap, A_CIM_DEBUGCFG, cfg ^ F_LADBGEN); 3690 3691 val = t4_read_reg(adap, A_CIM_DEBUGSTS); 3692 req = G_POLADBGWRPTR(val); 3693 rsp = G_PILADBGWRPTR(val); 3694 if (pif_req_wrptr) 3695 *pif_req_wrptr = req; 3696 if (pif_rsp_wrptr) 3697 *pif_rsp_wrptr = rsp; 3698 3699 for (i = 0; i < CIM_PIFLA_SIZE; i++) { 3700 for (j = 0; j < 6; j++) { 3701 t4_write_reg(adap, A_CIM_DEBUGCFG, V_POLADBGRDPTR(req) | 3702 V_PILADBGRDPTR(rsp)); 3703 *pif_req++ = t4_read_reg(adap, A_CIM_PO_LA_DEBUGDATA); 3704 *pif_rsp++ = t4_read_reg(adap, A_CIM_PI_LA_DEBUGDATA); 3705 req++; 3706 rsp++; 3707 } 3708 req = (req + 2) & M_POLADBGRDPTR; 3709 rsp = (rsp + 2) & M_PILADBGRDPTR; 3710 } 3711 t4_write_reg(adap, A_CIM_DEBUGCFG, cfg); 3712 } 3713 3714 void t4_cim_read_ma_la(struct adapter *adap, u32 *ma_req, u32 *ma_rsp) 3715 { 3716 u32 cfg; 3717 int i, j, idx; 3718 3719 cfg = t4_read_reg(adap, A_CIM_DEBUGCFG); 3720 if (cfg & F_LADBGEN) 3721 t4_write_reg(adap, A_CIM_DEBUGCFG, cfg ^ F_LADBGEN); 3722 3723 for (i = 0; i < CIM_MALA_SIZE; i++) { 3724 for (j = 0; j < 5; j++) { 3725 idx = 8 * i + j; 3726 t4_write_reg(adap, A_CIM_DEBUGCFG, V_POLADBGRDPTR(idx) | 3727 V_PILADBGRDPTR(idx)); 3728 *ma_req++ = t4_read_reg(adap, A_CIM_PO_LA_MADEBUGDATA); 3729 *ma_rsp++ = t4_read_reg(adap, A_CIM_PI_LA_MADEBUGDATA); 3730 } 3731 } 3732 t4_write_reg(adap, A_CIM_DEBUGCFG, cfg); 3733 } 3734 3735 void t4_ulprx_read_la(struct adapter *adap, u32 *la_buf) 3736 { 3737 unsigned int i, j; 3738 3739 for (i = 0; i < 8; i++) { 3740 u32 *p = la_buf + i; 3741 3742 t4_write_reg(adap, A_ULP_RX_LA_CTL, i); 3743 j = t4_read_reg(adap, A_ULP_RX_LA_WRPTR); 3744 t4_write_reg(adap, A_ULP_RX_LA_RDPTR, j); 3745 for (j = 0; j < ULPRX_LA_SIZE; j++, p += 8) 3746 *p = t4_read_reg(adap, A_ULP_RX_LA_RDDATA); 3747 } 3748 } 3749 3750 /** 3751 * fwcaps16_to_caps32 - convert 16-bit Port Capabilities to 32-bits 3752 * @caps16: a 16-bit Port Capabilities value 3753 * 3754 * Returns the equivalent 32-bit Port Capabilities value. 3755 */ 3756 static uint32_t fwcaps16_to_caps32(uint16_t caps16) 3757 { 3758 uint32_t caps32 = 0; 3759 3760 #define CAP16_TO_CAP32(__cap) \ 3761 do { \ 3762 if (caps16 & FW_PORT_CAP_##__cap) \ 3763 caps32 |= FW_PORT_CAP32_##__cap; \ 3764 } while (0) 3765 3766 CAP16_TO_CAP32(SPEED_100M); 3767 CAP16_TO_CAP32(SPEED_1G); 3768 CAP16_TO_CAP32(SPEED_25G); 3769 CAP16_TO_CAP32(SPEED_10G); 3770 CAP16_TO_CAP32(SPEED_40G); 3771 CAP16_TO_CAP32(SPEED_100G); 3772 CAP16_TO_CAP32(FC_RX); 3773 CAP16_TO_CAP32(FC_TX); 3774 CAP16_TO_CAP32(ANEG); 3775 CAP16_TO_CAP32(FORCE_PAUSE); 3776 CAP16_TO_CAP32(MDIAUTO); 3777 CAP16_TO_CAP32(MDISTRAIGHT); 3778 CAP16_TO_CAP32(FEC_RS); 3779 CAP16_TO_CAP32(FEC_BASER_RS); 3780 CAP16_TO_CAP32(802_3_PAUSE); 3781 CAP16_TO_CAP32(802_3_ASM_DIR); 3782 3783 #undef CAP16_TO_CAP32 3784 3785 return caps32; 3786 } 3787 3788 /** 3789 * fwcaps32_to_caps16 - convert 32-bit Port Capabilities to 16-bits 3790 * @caps32: a 32-bit Port Capabilities value 3791 * 3792 * Returns the equivalent 16-bit Port Capabilities value. Note that 3793 * not all 32-bit Port Capabilities can be represented in the 16-bit 3794 * Port Capabilities and some fields/values may not make it. 3795 */ 3796 static uint16_t fwcaps32_to_caps16(uint32_t caps32) 3797 { 3798 uint16_t caps16 = 0; 3799 3800 #define CAP32_TO_CAP16(__cap) \ 3801 do { \ 3802 if (caps32 & FW_PORT_CAP32_##__cap) \ 3803 caps16 |= FW_PORT_CAP_##__cap; \ 3804 } while (0) 3805 3806 CAP32_TO_CAP16(SPEED_100M); 3807 CAP32_TO_CAP16(SPEED_1G); 3808 CAP32_TO_CAP16(SPEED_10G); 3809 CAP32_TO_CAP16(SPEED_25G); 3810 CAP32_TO_CAP16(SPEED_40G); 3811 CAP32_TO_CAP16(SPEED_100G); 3812 CAP32_TO_CAP16(FC_RX); 3813 CAP32_TO_CAP16(FC_TX); 3814 CAP32_TO_CAP16(802_3_PAUSE); 3815 CAP32_TO_CAP16(802_3_ASM_DIR); 3816 CAP32_TO_CAP16(ANEG); 3817 CAP32_TO_CAP16(FORCE_PAUSE); 3818 CAP32_TO_CAP16(MDIAUTO); 3819 CAP32_TO_CAP16(MDISTRAIGHT); 3820 CAP32_TO_CAP16(FEC_RS); 3821 CAP32_TO_CAP16(FEC_BASER_RS); 3822 3823 #undef CAP32_TO_CAP16 3824 3825 return caps16; 3826 } 3827 3828 static int8_t fwcap_to_fec(uint32_t caps, bool unset_means_none) 3829 { 3830 int8_t fec = 0; 3831 3832 if ((caps & V_FW_PORT_CAP32_FEC(M_FW_PORT_CAP32_FEC)) == 0) 3833 return (unset_means_none ? FEC_NONE : 0); 3834 3835 if (caps & FW_PORT_CAP32_FEC_RS) 3836 fec |= FEC_RS; 3837 if (caps & FW_PORT_CAP32_FEC_BASER_RS) 3838 fec |= FEC_BASER_RS; 3839 if (caps & FW_PORT_CAP32_FEC_NO_FEC) 3840 fec |= FEC_NONE; 3841 3842 return (fec); 3843 } 3844 3845 /* 3846 * Note that 0 is not translated to NO_FEC. 3847 */ 3848 static uint32_t fec_to_fwcap(int8_t fec) 3849 { 3850 uint32_t caps = 0; 3851 3852 /* Only real FECs allowed. */ 3853 MPASS((fec & ~M_FW_PORT_CAP32_FEC) == 0); 3854 3855 if (fec & FEC_RS) 3856 caps |= FW_PORT_CAP32_FEC_RS; 3857 if (fec & FEC_BASER_RS) 3858 caps |= FW_PORT_CAP32_FEC_BASER_RS; 3859 if (fec & FEC_NONE) 3860 caps |= FW_PORT_CAP32_FEC_NO_FEC; 3861 3862 return (caps); 3863 } 3864 3865 /** 3866 * t4_link_l1cfg - apply link configuration to MAC/PHY 3867 * @phy: the PHY to setup 3868 * @mac: the MAC to setup 3869 * @lc: the requested link configuration 3870 * 3871 * Set up a port's MAC and PHY according to a desired link configuration. 3872 * - If the PHY can auto-negotiate first decide what to advertise, then 3873 * enable/disable auto-negotiation as desired, and reset. 3874 * - If the PHY does not auto-negotiate just reset it. 3875 * - If auto-negotiation is off set the MAC to the proper speed/duplex/FC, 3876 * otherwise do it later based on the outcome of auto-negotiation. 3877 */ 3878 int t4_link_l1cfg(struct adapter *adap, unsigned int mbox, unsigned int port, 3879 struct link_config *lc) 3880 { 3881 struct fw_port_cmd c; 3882 unsigned int mdi = V_FW_PORT_CAP32_MDI(FW_PORT_CAP32_MDI_AUTO); 3883 unsigned int aneg, fc, fec, speed, rcap; 3884 3885 fc = 0; 3886 if (lc->requested_fc & PAUSE_RX) 3887 fc |= FW_PORT_CAP32_FC_RX; 3888 if (lc->requested_fc & PAUSE_TX) 3889 fc |= FW_PORT_CAP32_FC_TX; 3890 if (!(lc->requested_fc & PAUSE_AUTONEG)) 3891 fc |= FW_PORT_CAP32_FORCE_PAUSE; 3892 3893 if (lc->requested_aneg == AUTONEG_DISABLE) 3894 aneg = 0; 3895 else if (lc->requested_aneg == AUTONEG_ENABLE) 3896 aneg = FW_PORT_CAP32_ANEG; 3897 else 3898 aneg = lc->pcaps & FW_PORT_CAP32_ANEG; 3899 3900 if (aneg) { 3901 speed = lc->pcaps & 3902 V_FW_PORT_CAP32_SPEED(M_FW_PORT_CAP32_SPEED); 3903 } else if (lc->requested_speed != 0) 3904 speed = speed_to_fwcap(lc->requested_speed); 3905 else 3906 speed = fwcap_top_speed(lc->pcaps); 3907 3908 fec = 0; 3909 if (fec_supported(speed)) { 3910 int force_fec; 3911 3912 if (lc->pcaps & FW_PORT_CAP32_FORCE_FEC) 3913 force_fec = lc->force_fec; 3914 else 3915 force_fec = 0; 3916 3917 if (lc->requested_fec == FEC_AUTO) { 3918 if (force_fec > 0) { 3919 /* 3920 * Must use FORCE_FEC even though requested FEC 3921 * is AUTO. Set all the FEC bits valid for the 3922 * speed and let the firmware pick one. 3923 */ 3924 fec |= FW_PORT_CAP32_FORCE_FEC; 3925 if (speed & FW_PORT_CAP32_SPEED_100G) { 3926 fec |= FW_PORT_CAP32_FEC_RS; 3927 fec |= FW_PORT_CAP32_FEC_NO_FEC; 3928 } else if (speed & FW_PORT_CAP32_SPEED_50G) { 3929 fec |= FW_PORT_CAP32_FEC_BASER_RS; 3930 fec |= FW_PORT_CAP32_FEC_NO_FEC; 3931 } else { 3932 fec |= FW_PORT_CAP32_FEC_RS; 3933 fec |= FW_PORT_CAP32_FEC_BASER_RS; 3934 fec |= FW_PORT_CAP32_FEC_NO_FEC; 3935 } 3936 } else { 3937 /* 3938 * Set only 1b. Old firmwares can't deal with 3939 * multiple bits and new firmwares are free to 3940 * ignore this and try whatever FECs they want 3941 * because we aren't setting FORCE_FEC here. 3942 */ 3943 fec |= fec_to_fwcap(lc->fec_hint); 3944 MPASS(powerof2(fec)); 3945 3946 /* 3947 * Override the hint if the FEC is not valid for 3948 * the potential top speed. Request the best 3949 * FEC at that speed instead. 3950 */ 3951 if (speed & FW_PORT_CAP32_SPEED_100G) { 3952 if (fec == FW_PORT_CAP32_FEC_BASER_RS) 3953 fec = FW_PORT_CAP32_FEC_RS; 3954 } else if (speed & FW_PORT_CAP32_SPEED_50G) { 3955 if (fec == FW_PORT_CAP32_FEC_RS) 3956 fec = FW_PORT_CAP32_FEC_BASER_RS; 3957 } 3958 } 3959 } else { 3960 /* 3961 * User has explicitly requested some FEC(s). Set 3962 * FORCE_FEC unless prohibited from using it. 3963 */ 3964 if (force_fec != 0) 3965 fec |= FW_PORT_CAP32_FORCE_FEC; 3966 fec |= fec_to_fwcap(lc->requested_fec & 3967 M_FW_PORT_CAP32_FEC); 3968 if (lc->requested_fec & FEC_MODULE) 3969 fec |= fec_to_fwcap(lc->fec_hint); 3970 } 3971 3972 /* 3973 * This is for compatibility with old firmwares. The original 3974 * way to request NO_FEC was to not set any of the FEC bits. New 3975 * firmwares understand this too. 3976 */ 3977 if (fec == FW_PORT_CAP32_FEC_NO_FEC) 3978 fec = 0; 3979 } 3980 3981 /* Force AN on for BT cards. */ 3982 if (isset(&adap->bt_map, port)) 3983 aneg = lc->pcaps & FW_PORT_CAP32_ANEG; 3984 3985 rcap = aneg | speed | fc | fec; 3986 if ((rcap | lc->pcaps) != lc->pcaps) { 3987 #ifdef INVARIANTS 3988 CH_WARN(adap, "rcap 0x%08x, pcap 0x%08x, removed 0x%x\n", rcap, 3989 lc->pcaps, rcap & (rcap ^ lc->pcaps)); 3990 #endif 3991 rcap &= lc->pcaps; 3992 } 3993 rcap |= mdi; 3994 3995 memset(&c, 0, sizeof(c)); 3996 c.op_to_portid = cpu_to_be32(V_FW_CMD_OP(FW_PORT_CMD) | 3997 F_FW_CMD_REQUEST | F_FW_CMD_EXEC | 3998 V_FW_PORT_CMD_PORTID(port)); 3999 if (adap->params.port_caps32) { 4000 c.action_to_len16 = 4001 cpu_to_be32(V_FW_PORT_CMD_ACTION(FW_PORT_ACTION_L1_CFG32) | 4002 FW_LEN16(c)); 4003 c.u.l1cfg32.rcap32 = cpu_to_be32(rcap); 4004 } else { 4005 c.action_to_len16 = 4006 cpu_to_be32(V_FW_PORT_CMD_ACTION(FW_PORT_ACTION_L1_CFG) | 4007 FW_LEN16(c)); 4008 c.u.l1cfg.rcap = cpu_to_be32(fwcaps32_to_caps16(rcap)); 4009 } 4010 4011 lc->requested_caps = rcap; 4012 return t4_wr_mbox_ns(adap, mbox, &c, sizeof(c), NULL); 4013 } 4014 4015 /** 4016 * t4_restart_aneg - restart autonegotiation 4017 * @adap: the adapter 4018 * @mbox: mbox to use for the FW command 4019 * @port: the port id 4020 * 4021 * Restarts autonegotiation for the selected port. 4022 */ 4023 int t4_restart_aneg(struct adapter *adap, unsigned int mbox, unsigned int port) 4024 { 4025 struct fw_port_cmd c; 4026 4027 memset(&c, 0, sizeof(c)); 4028 c.op_to_portid = cpu_to_be32(V_FW_CMD_OP(FW_PORT_CMD) | 4029 F_FW_CMD_REQUEST | F_FW_CMD_EXEC | 4030 V_FW_PORT_CMD_PORTID(port)); 4031 c.action_to_len16 = 4032 cpu_to_be32(V_FW_PORT_CMD_ACTION(FW_PORT_ACTION_L1_CFG) | 4033 FW_LEN16(c)); 4034 c.u.l1cfg.rcap = cpu_to_be32(FW_PORT_CAP_ANEG); 4035 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); 4036 } 4037 4038 struct intr_details { 4039 u32 mask; 4040 const char *msg; 4041 }; 4042 4043 struct intr_action { 4044 u32 mask; 4045 int arg; 4046 bool (*action)(struct adapter *, int, bool); 4047 }; 4048 4049 #define NONFATAL_IF_DISABLED 1 4050 struct intr_info { 4051 const char *name; /* name of the INT_CAUSE register */ 4052 int cause_reg; /* INT_CAUSE register */ 4053 int enable_reg; /* INT_ENABLE register */ 4054 u32 fatal; /* bits that are fatal */ 4055 int flags; /* hints */ 4056 const struct intr_details *details; 4057 const struct intr_action *actions; 4058 }; 4059 4060 static inline char 4061 intr_alert_char(u32 cause, u32 enable, u32 fatal) 4062 { 4063 4064 if (cause & fatal) 4065 return ('!'); 4066 if (cause & enable) 4067 return ('*'); 4068 return ('-'); 4069 } 4070 4071 static void 4072 t4_show_intr_info(struct adapter *adap, const struct intr_info *ii, u32 cause) 4073 { 4074 u32 enable, fatal, leftover; 4075 const struct intr_details *details; 4076 char alert; 4077 4078 enable = t4_read_reg(adap, ii->enable_reg); 4079 if (ii->flags & NONFATAL_IF_DISABLED) 4080 fatal = ii->fatal & t4_read_reg(adap, ii->enable_reg); 4081 else 4082 fatal = ii->fatal; 4083 alert = intr_alert_char(cause, enable, fatal); 4084 CH_ALERT(adap, "%c %s 0x%x = 0x%08x, E 0x%08x, F 0x%08x\n", 4085 alert, ii->name, ii->cause_reg, cause, enable, fatal); 4086 4087 leftover = cause; 4088 for (details = ii->details; details && details->mask != 0; details++) { 4089 u32 msgbits = details->mask & cause; 4090 if (msgbits == 0) 4091 continue; 4092 alert = intr_alert_char(msgbits, enable, ii->fatal); 4093 CH_ALERT(adap, " %c [0x%08x] %s\n", alert, msgbits, 4094 details->msg); 4095 leftover &= ~msgbits; 4096 } 4097 if (leftover != 0 && leftover != cause) 4098 CH_ALERT(adap, " ? [0x%08x]\n", leftover); 4099 } 4100 4101 /* 4102 * Returns true for fatal error. 4103 */ 4104 static bool 4105 t4_handle_intr(struct adapter *adap, const struct intr_info *ii, 4106 u32 additional_cause, bool verbose) 4107 { 4108 u32 cause, fatal; 4109 bool rc; 4110 const struct intr_action *action; 4111 4112 /* 4113 * Read and display cause. Note that the top level PL_INT_CAUSE is a 4114 * bit special and we need to completely ignore the bits that are not in 4115 * PL_INT_ENABLE. 4116 */ 4117 cause = t4_read_reg(adap, ii->cause_reg); 4118 if (ii->cause_reg == A_PL_INT_CAUSE) 4119 cause &= t4_read_reg(adap, ii->enable_reg); 4120 if (verbose || cause != 0) 4121 t4_show_intr_info(adap, ii, cause); 4122 fatal = cause & ii->fatal; 4123 if (fatal != 0 && ii->flags & NONFATAL_IF_DISABLED) 4124 fatal &= t4_read_reg(adap, ii->enable_reg); 4125 cause |= additional_cause; 4126 if (cause == 0) 4127 return (false); 4128 4129 rc = fatal != 0; 4130 for (action = ii->actions; action && action->mask != 0; action++) { 4131 if (!(action->mask & cause)) 4132 continue; 4133 rc |= (action->action)(adap, action->arg, verbose); 4134 } 4135 4136 /* clear */ 4137 t4_write_reg(adap, ii->cause_reg, cause); 4138 (void)t4_read_reg(adap, ii->cause_reg); 4139 4140 return (rc); 4141 } 4142 4143 /* 4144 * Interrupt handler for the PCIE module. 4145 */ 4146 static bool pcie_intr_handler(struct adapter *adap, int arg, bool verbose) 4147 { 4148 static const struct intr_details sysbus_intr_details[] = { 4149 { F_RNPP, "RXNP array parity error" }, 4150 { F_RPCP, "RXPC array parity error" }, 4151 { F_RCIP, "RXCIF array parity error" }, 4152 { F_RCCP, "Rx completions control array parity error" }, 4153 { F_RFTP, "RXFT array parity error" }, 4154 { 0 } 4155 }; 4156 static const struct intr_info sysbus_intr_info = { 4157 .name = "PCIE_CORE_UTL_SYSTEM_BUS_AGENT_STATUS", 4158 .cause_reg = A_PCIE_CORE_UTL_SYSTEM_BUS_AGENT_STATUS, 4159 .enable_reg = A_PCIE_CORE_UTL_SYSTEM_BUS_AGENT_INTERRUPT_ENABLE, 4160 .fatal = F_RFTP | F_RCCP | F_RCIP | F_RPCP | F_RNPP, 4161 .flags = 0, 4162 .details = sysbus_intr_details, 4163 .actions = NULL, 4164 }; 4165 static const struct intr_details pcie_port_intr_details[] = { 4166 { F_TPCP, "TXPC array parity error" }, 4167 { F_TNPP, "TXNP array parity error" }, 4168 { F_TFTP, "TXFT array parity error" }, 4169 { F_TCAP, "TXCA array parity error" }, 4170 { F_TCIP, "TXCIF array parity error" }, 4171 { F_RCAP, "RXCA array parity error" }, 4172 { F_OTDD, "outbound request TLP discarded" }, 4173 { F_RDPE, "Rx data parity error" }, 4174 { F_TDUE, "Tx uncorrectable data error" }, 4175 { 0 } 4176 }; 4177 static const struct intr_info pcie_port_intr_info = { 4178 .name = "PCIE_CORE_UTL_PCI_EXPRESS_PORT_STATUS", 4179 .cause_reg = A_PCIE_CORE_UTL_PCI_EXPRESS_PORT_STATUS, 4180 .enable_reg = A_PCIE_CORE_UTL_PCI_EXPRESS_PORT_INTERRUPT_ENABLE, 4181 .fatal = F_TPCP | F_TNPP | F_TFTP | F_TCAP | F_TCIP | F_RCAP | 4182 F_OTDD | F_RDPE | F_TDUE, 4183 .flags = 0, 4184 .details = pcie_port_intr_details, 4185 .actions = NULL, 4186 }; 4187 static const struct intr_details pcie_intr_details[] = { 4188 { F_MSIADDRLPERR, "MSI AddrL parity error" }, 4189 { F_MSIADDRHPERR, "MSI AddrH parity error" }, 4190 { F_MSIDATAPERR, "MSI data parity error" }, 4191 { F_MSIXADDRLPERR, "MSI-X AddrL parity error" }, 4192 { F_MSIXADDRHPERR, "MSI-X AddrH parity error" }, 4193 { F_MSIXDATAPERR, "MSI-X data parity error" }, 4194 { F_MSIXDIPERR, "MSI-X DI parity error" }, 4195 { F_PIOCPLPERR, "PCIe PIO completion FIFO parity error" }, 4196 { F_PIOREQPERR, "PCIe PIO request FIFO parity error" }, 4197 { F_TARTAGPERR, "PCIe target tag FIFO parity error" }, 4198 { F_CCNTPERR, "PCIe CMD channel count parity error" }, 4199 { F_CREQPERR, "PCIe CMD channel request parity error" }, 4200 { F_CRSPPERR, "PCIe CMD channel response parity error" }, 4201 { F_DCNTPERR, "PCIe DMA channel count parity error" }, 4202 { F_DREQPERR, "PCIe DMA channel request parity error" }, 4203 { F_DRSPPERR, "PCIe DMA channel response parity error" }, 4204 { F_HCNTPERR, "PCIe HMA channel count parity error" }, 4205 { F_HREQPERR, "PCIe HMA channel request parity error" }, 4206 { F_HRSPPERR, "PCIe HMA channel response parity error" }, 4207 { F_CFGSNPPERR, "PCIe config snoop FIFO parity error" }, 4208 { F_FIDPERR, "PCIe FID parity error" }, 4209 { F_INTXCLRPERR, "PCIe INTx clear parity error" }, 4210 { F_MATAGPERR, "PCIe MA tag parity error" }, 4211 { F_PIOTAGPERR, "PCIe PIO tag parity error" }, 4212 { F_RXCPLPERR, "PCIe Rx completion parity error" }, 4213 { F_RXWRPERR, "PCIe Rx write parity error" }, 4214 { F_RPLPERR, "PCIe replay buffer parity error" }, 4215 { F_PCIESINT, "PCIe core secondary fault" }, 4216 { F_PCIEPINT, "PCIe core primary fault" }, 4217 { F_UNXSPLCPLERR, "PCIe unexpected split completion error" }, 4218 { 0 } 4219 }; 4220 static const struct intr_details t5_pcie_intr_details[] = { 4221 { F_IPGRPPERR, "Parity errors observed by IP" }, 4222 { F_NONFATALERR, "PCIe non-fatal error" }, 4223 { F_READRSPERR, "Outbound read error" }, 4224 { F_TRGT1GRPPERR, "PCIe TRGT1 group FIFOs parity error" }, 4225 { F_IPSOTPERR, "PCIe IP SOT buffer SRAM parity error" }, 4226 { F_IPRETRYPERR, "PCIe IP replay buffer parity error" }, 4227 { F_IPRXDATAGRPPERR, "PCIe IP Rx data group SRAMs parity error" }, 4228 { F_IPRXHDRGRPPERR, "PCIe IP Rx header group SRAMs parity error" }, 4229 { F_PIOTAGQPERR, "PIO tag queue FIFO parity error" }, 4230 { F_MAGRPPERR, "MA group FIFO parity error" }, 4231 { F_VFIDPERR, "VFID SRAM parity error" }, 4232 { F_FIDPERR, "FID SRAM parity error" }, 4233 { F_CFGSNPPERR, "config snoop FIFO parity error" }, 4234 { F_HRSPPERR, "HMA channel response data SRAM parity error" }, 4235 { F_HREQRDPERR, "HMA channel read request SRAM parity error" }, 4236 { F_HREQWRPERR, "HMA channel write request SRAM parity error" }, 4237 { F_DRSPPERR, "DMA channel response data SRAM parity error" }, 4238 { F_DREQRDPERR, "DMA channel write request SRAM parity error" }, 4239 { F_CRSPPERR, "CMD channel response data SRAM parity error" }, 4240 { F_CREQRDPERR, "CMD channel read request SRAM parity error" }, 4241 { F_MSTTAGQPERR, "PCIe master tag queue SRAM parity error" }, 4242 { F_TGTTAGQPERR, "PCIe target tag queue FIFO parity error" }, 4243 { F_PIOREQGRPPERR, "PIO request group FIFOs parity error" }, 4244 { F_PIOCPLGRPPERR, "PIO completion group FIFOs parity error" }, 4245 { F_MSIXDIPERR, "MSI-X DI SRAM parity error" }, 4246 { F_MSIXDATAPERR, "MSI-X data SRAM parity error" }, 4247 { F_MSIXADDRHPERR, "MSI-X AddrH SRAM parity error" }, 4248 { F_MSIXADDRLPERR, "MSI-X AddrL SRAM parity error" }, 4249 { F_MSIXSTIPERR, "MSI-X STI SRAM parity error" }, 4250 { F_MSTTIMEOUTPERR, "Master timeout FIFO parity error" }, 4251 { F_MSTGRPPERR, "Master response read queue SRAM parity error" }, 4252 { 0 } 4253 }; 4254 struct intr_info pcie_intr_info = { 4255 .name = "PCIE_INT_CAUSE", 4256 .cause_reg = A_PCIE_INT_CAUSE, 4257 .enable_reg = A_PCIE_INT_ENABLE, 4258 .fatal = 0xffffffff, 4259 .flags = NONFATAL_IF_DISABLED, 4260 .details = NULL, 4261 .actions = NULL, 4262 }; 4263 bool fatal = false; 4264 4265 if (is_t4(adap)) { 4266 fatal |= t4_handle_intr(adap, &sysbus_intr_info, 0, verbose); 4267 fatal |= t4_handle_intr(adap, &pcie_port_intr_info, 0, verbose); 4268 4269 pcie_intr_info.details = pcie_intr_details; 4270 } else { 4271 pcie_intr_info.details = t5_pcie_intr_details; 4272 } 4273 fatal |= t4_handle_intr(adap, &pcie_intr_info, 0, verbose); 4274 4275 return (fatal); 4276 } 4277 4278 /* 4279 * TP interrupt handler. 4280 */ 4281 static bool tp_intr_handler(struct adapter *adap, int arg, bool verbose) 4282 { 4283 static const struct intr_details tp_intr_details[] = { 4284 { 0x3fffffff, "TP parity error" }, 4285 { F_FLMTXFLSTEMPTY, "TP out of Tx pages" }, 4286 { 0 } 4287 }; 4288 static const struct intr_info tp_intr_info = { 4289 .name = "TP_INT_CAUSE", 4290 .cause_reg = A_TP_INT_CAUSE, 4291 .enable_reg = A_TP_INT_ENABLE, 4292 .fatal = 0x7fffffff, 4293 .flags = NONFATAL_IF_DISABLED, 4294 .details = tp_intr_details, 4295 .actions = NULL, 4296 }; 4297 4298 return (t4_handle_intr(adap, &tp_intr_info, 0, verbose)); 4299 } 4300 4301 /* 4302 * SGE interrupt handler. 4303 */ 4304 static bool sge_intr_handler(struct adapter *adap, int arg, bool verbose) 4305 { 4306 static const struct intr_info sge_int1_info = { 4307 .name = "SGE_INT_CAUSE1", 4308 .cause_reg = A_SGE_INT_CAUSE1, 4309 .enable_reg = A_SGE_INT_ENABLE1, 4310 .fatal = 0xffffffff, 4311 .flags = NONFATAL_IF_DISABLED, 4312 .details = NULL, 4313 .actions = NULL, 4314 }; 4315 static const struct intr_info sge_int2_info = { 4316 .name = "SGE_INT_CAUSE2", 4317 .cause_reg = A_SGE_INT_CAUSE2, 4318 .enable_reg = A_SGE_INT_ENABLE2, 4319 .fatal = 0xffffffff, 4320 .flags = NONFATAL_IF_DISABLED, 4321 .details = NULL, 4322 .actions = NULL, 4323 }; 4324 static const struct intr_details sge_int3_details[] = { 4325 { F_ERR_FLM_DBP, 4326 "DBP pointer delivery for invalid context or QID" }, 4327 { F_ERR_FLM_IDMA1 | F_ERR_FLM_IDMA0, 4328 "Invalid QID or header request by IDMA" }, 4329 { F_ERR_FLM_HINT, "FLM hint is for invalid context or QID" }, 4330 { F_ERR_PCIE_ERROR3, "SGE PCIe error for DBP thread 3" }, 4331 { F_ERR_PCIE_ERROR2, "SGE PCIe error for DBP thread 2" }, 4332 { F_ERR_PCIE_ERROR1, "SGE PCIe error for DBP thread 1" }, 4333 { F_ERR_PCIE_ERROR0, "SGE PCIe error for DBP thread 0" }, 4334 { F_ERR_TIMER_ABOVE_MAX_QID, 4335 "SGE GTS with timer 0-5 for IQID > 1023" }, 4336 { F_ERR_CPL_EXCEED_IQE_SIZE, 4337 "SGE received CPL exceeding IQE size" }, 4338 { F_ERR_INVALID_CIDX_INC, "SGE GTS CIDX increment too large" }, 4339 { F_ERR_ITP_TIME_PAUSED, "SGE ITP error" }, 4340 { F_ERR_CPL_OPCODE_0, "SGE received 0-length CPL" }, 4341 { F_ERR_DROPPED_DB, "SGE DB dropped" }, 4342 { F_ERR_DATA_CPL_ON_HIGH_QID1 | F_ERR_DATA_CPL_ON_HIGH_QID0, 4343 "SGE IQID > 1023 received CPL for FL" }, 4344 { F_ERR_BAD_DB_PIDX3 | F_ERR_BAD_DB_PIDX2 | F_ERR_BAD_DB_PIDX1 | 4345 F_ERR_BAD_DB_PIDX0, "SGE DBP pidx increment too large" }, 4346 { F_ERR_ING_PCIE_CHAN, "SGE Ingress PCIe channel mismatch" }, 4347 { F_ERR_ING_CTXT_PRIO, 4348 "Ingress context manager priority user error" }, 4349 { F_ERR_EGR_CTXT_PRIO, 4350 "Egress context manager priority user error" }, 4351 { F_DBFIFO_HP_INT, "High priority DB FIFO threshold reached" }, 4352 { F_DBFIFO_LP_INT, "Low priority DB FIFO threshold reached" }, 4353 { F_REG_ADDRESS_ERR, "Undefined SGE register accessed" }, 4354 { F_INGRESS_SIZE_ERR, "SGE illegal ingress QID" }, 4355 { F_EGRESS_SIZE_ERR, "SGE illegal egress QID" }, 4356 { 0x0000000f, "SGE context access for invalid queue" }, 4357 { 0 } 4358 }; 4359 static const struct intr_details t6_sge_int3_details[] = { 4360 { F_ERR_FLM_DBP, 4361 "DBP pointer delivery for invalid context or QID" }, 4362 { F_ERR_FLM_IDMA1 | F_ERR_FLM_IDMA0, 4363 "Invalid QID or header request by IDMA" }, 4364 { F_ERR_FLM_HINT, "FLM hint is for invalid context or QID" }, 4365 { F_ERR_PCIE_ERROR3, "SGE PCIe error for DBP thread 3" }, 4366 { F_ERR_PCIE_ERROR2, "SGE PCIe error for DBP thread 2" }, 4367 { F_ERR_PCIE_ERROR1, "SGE PCIe error for DBP thread 1" }, 4368 { F_ERR_PCIE_ERROR0, "SGE PCIe error for DBP thread 0" }, 4369 { F_ERR_TIMER_ABOVE_MAX_QID, 4370 "SGE GTS with timer 0-5 for IQID > 1023" }, 4371 { F_ERR_CPL_EXCEED_IQE_SIZE, 4372 "SGE received CPL exceeding IQE size" }, 4373 { F_ERR_INVALID_CIDX_INC, "SGE GTS CIDX increment too large" }, 4374 { F_ERR_ITP_TIME_PAUSED, "SGE ITP error" }, 4375 { F_ERR_CPL_OPCODE_0, "SGE received 0-length CPL" }, 4376 { F_ERR_DROPPED_DB, "SGE DB dropped" }, 4377 { F_ERR_DATA_CPL_ON_HIGH_QID1 | F_ERR_DATA_CPL_ON_HIGH_QID0, 4378 "SGE IQID > 1023 received CPL for FL" }, 4379 { F_ERR_BAD_DB_PIDX3 | F_ERR_BAD_DB_PIDX2 | F_ERR_BAD_DB_PIDX1 | 4380 F_ERR_BAD_DB_PIDX0, "SGE DBP pidx increment too large" }, 4381 { F_ERR_ING_PCIE_CHAN, "SGE Ingress PCIe channel mismatch" }, 4382 { F_ERR_ING_CTXT_PRIO, 4383 "Ingress context manager priority user error" }, 4384 { F_ERR_EGR_CTXT_PRIO, 4385 "Egress context manager priority user error" }, 4386 { F_DBP_TBUF_FULL, "SGE DBP tbuf full" }, 4387 { F_FATAL_WRE_LEN, 4388 "SGE WRE packet less than advertized length" }, 4389 { F_REG_ADDRESS_ERR, "Undefined SGE register accessed" }, 4390 { F_INGRESS_SIZE_ERR, "SGE illegal ingress QID" }, 4391 { F_EGRESS_SIZE_ERR, "SGE illegal egress QID" }, 4392 { 0x0000000f, "SGE context access for invalid queue" }, 4393 { 0 } 4394 }; 4395 struct intr_info sge_int3_info = { 4396 .name = "SGE_INT_CAUSE3", 4397 .cause_reg = A_SGE_INT_CAUSE3, 4398 .enable_reg = A_SGE_INT_ENABLE3, 4399 .fatal = F_ERR_CPL_EXCEED_IQE_SIZE, 4400 .flags = 0, 4401 .details = NULL, 4402 .actions = NULL, 4403 }; 4404 static const struct intr_info sge_int4_info = { 4405 .name = "SGE_INT_CAUSE4", 4406 .cause_reg = A_SGE_INT_CAUSE4, 4407 .enable_reg = A_SGE_INT_ENABLE4, 4408 .fatal = 0, 4409 .flags = 0, 4410 .details = NULL, 4411 .actions = NULL, 4412 }; 4413 static const struct intr_info sge_int5_info = { 4414 .name = "SGE_INT_CAUSE5", 4415 .cause_reg = A_SGE_INT_CAUSE5, 4416 .enable_reg = A_SGE_INT_ENABLE5, 4417 .fatal = 0xffffffff, 4418 .flags = NONFATAL_IF_DISABLED, 4419 .details = NULL, 4420 .actions = NULL, 4421 }; 4422 static const struct intr_info sge_int6_info = { 4423 .name = "SGE_INT_CAUSE6", 4424 .cause_reg = A_SGE_INT_CAUSE6, 4425 .enable_reg = A_SGE_INT_ENABLE6, 4426 .fatal = 0, 4427 .flags = 0, 4428 .details = NULL, 4429 .actions = NULL, 4430 }; 4431 4432 bool fatal; 4433 u32 v; 4434 4435 if (chip_id(adap) <= CHELSIO_T5) { 4436 sge_int3_info.details = sge_int3_details; 4437 } else { 4438 sge_int3_info.details = t6_sge_int3_details; 4439 } 4440 4441 fatal = false; 4442 fatal |= t4_handle_intr(adap, &sge_int1_info, 0, verbose); 4443 fatal |= t4_handle_intr(adap, &sge_int2_info, 0, verbose); 4444 fatal |= t4_handle_intr(adap, &sge_int3_info, 0, verbose); 4445 fatal |= t4_handle_intr(adap, &sge_int4_info, 0, verbose); 4446 if (chip_id(adap) >= CHELSIO_T5) 4447 fatal |= t4_handle_intr(adap, &sge_int5_info, 0, verbose); 4448 if (chip_id(adap) >= CHELSIO_T6) 4449 fatal |= t4_handle_intr(adap, &sge_int6_info, 0, verbose); 4450 4451 v = t4_read_reg(adap, A_SGE_ERROR_STATS); 4452 if (v & F_ERROR_QID_VALID) { 4453 CH_ERR(adap, "SGE error for QID %u\n", G_ERROR_QID(v)); 4454 if (v & F_UNCAPTURED_ERROR) 4455 CH_ERR(adap, "SGE UNCAPTURED_ERROR set (clearing)\n"); 4456 t4_write_reg(adap, A_SGE_ERROR_STATS, 4457 F_ERROR_QID_VALID | F_UNCAPTURED_ERROR); 4458 } 4459 4460 return (fatal); 4461 } 4462 4463 /* 4464 * CIM interrupt handler. 4465 */ 4466 static bool cim_intr_handler(struct adapter *adap, int arg, bool verbose) 4467 { 4468 static const struct intr_details cim_host_intr_details[] = { 4469 /* T6+ */ 4470 { F_PCIE2CIMINTFPARERR, "CIM IBQ PCIe interface parity error" }, 4471 4472 /* T5+ */ 4473 { F_MA_CIM_INTFPERR, "MA2CIM interface parity error" }, 4474 { F_PLCIM_MSTRSPDATAPARERR, 4475 "PL2CIM master response data parity error" }, 4476 { F_NCSI2CIMINTFPARERR, "CIM IBQ NC-SI interface parity error" }, 4477 { F_SGE2CIMINTFPARERR, "CIM IBQ SGE interface parity error" }, 4478 { F_ULP2CIMINTFPARERR, "CIM IBQ ULP_TX interface parity error" }, 4479 { F_TP2CIMINTFPARERR, "CIM IBQ TP interface parity error" }, 4480 { F_OBQSGERX1PARERR, "CIM OBQ SGE1_RX parity error" }, 4481 { F_OBQSGERX0PARERR, "CIM OBQ SGE0_RX parity error" }, 4482 4483 /* T4+ */ 4484 { F_TIEQOUTPARERRINT, "CIM TIEQ outgoing FIFO parity error" }, 4485 { F_TIEQINPARERRINT, "CIM TIEQ incoming FIFO parity error" }, 4486 { F_MBHOSTPARERR, "CIM mailbox host read parity error" }, 4487 { F_MBUPPARERR, "CIM mailbox uP parity error" }, 4488 { F_IBQTP0PARERR, "CIM IBQ TP0 parity error" }, 4489 { F_IBQTP1PARERR, "CIM IBQ TP1 parity error" }, 4490 { F_IBQULPPARERR, "CIM IBQ ULP parity error" }, 4491 { F_IBQSGELOPARERR, "CIM IBQ SGE_LO parity error" }, 4492 { F_IBQSGEHIPARERR | F_IBQPCIEPARERR, /* same bit */ 4493 "CIM IBQ PCIe/SGE_HI parity error" }, 4494 { F_IBQNCSIPARERR, "CIM IBQ NC-SI parity error" }, 4495 { F_OBQULP0PARERR, "CIM OBQ ULP0 parity error" }, 4496 { F_OBQULP1PARERR, "CIM OBQ ULP1 parity error" }, 4497 { F_OBQULP2PARERR, "CIM OBQ ULP2 parity error" }, 4498 { F_OBQULP3PARERR, "CIM OBQ ULP3 parity error" }, 4499 { F_OBQSGEPARERR, "CIM OBQ SGE parity error" }, 4500 { F_OBQNCSIPARERR, "CIM OBQ NC-SI parity error" }, 4501 { F_TIMER1INT, "CIM TIMER0 interrupt" }, 4502 { F_TIMER0INT, "CIM TIMER0 interrupt" }, 4503 { F_PREFDROPINT, "CIM control register prefetch drop" }, 4504 { 0} 4505 }; 4506 static const struct intr_info cim_host_intr_info = { 4507 .name = "CIM_HOST_INT_CAUSE", 4508 .cause_reg = A_CIM_HOST_INT_CAUSE, 4509 .enable_reg = A_CIM_HOST_INT_ENABLE, 4510 .fatal = 0x007fffe6, 4511 .flags = NONFATAL_IF_DISABLED, 4512 .details = cim_host_intr_details, 4513 .actions = NULL, 4514 }; 4515 static const struct intr_details cim_host_upacc_intr_details[] = { 4516 { F_EEPROMWRINT, "CIM EEPROM came out of busy state" }, 4517 { F_TIMEOUTMAINT, "CIM PIF MA timeout" }, 4518 { F_TIMEOUTINT, "CIM PIF timeout" }, 4519 { F_RSPOVRLOOKUPINT, "CIM response FIFO overwrite" }, 4520 { F_REQOVRLOOKUPINT, "CIM request FIFO overwrite" }, 4521 { F_BLKWRPLINT, "CIM block write to PL space" }, 4522 { F_BLKRDPLINT, "CIM block read from PL space" }, 4523 { F_SGLWRPLINT, 4524 "CIM single write to PL space with illegal BEs" }, 4525 { F_SGLRDPLINT, 4526 "CIM single read from PL space with illegal BEs" }, 4527 { F_BLKWRCTLINT, "CIM block write to CTL space" }, 4528 { F_BLKRDCTLINT, "CIM block read from CTL space" }, 4529 { F_SGLWRCTLINT, 4530 "CIM single write to CTL space with illegal BEs" }, 4531 { F_SGLRDCTLINT, 4532 "CIM single read from CTL space with illegal BEs" }, 4533 { F_BLKWREEPROMINT, "CIM block write to EEPROM space" }, 4534 { F_BLKRDEEPROMINT, "CIM block read from EEPROM space" }, 4535 { F_SGLWREEPROMINT, 4536 "CIM single write to EEPROM space with illegal BEs" }, 4537 { F_SGLRDEEPROMINT, 4538 "CIM single read from EEPROM space with illegal BEs" }, 4539 { F_BLKWRFLASHINT, "CIM block write to flash space" }, 4540 { F_BLKRDFLASHINT, "CIM block read from flash space" }, 4541 { F_SGLWRFLASHINT, "CIM single write to flash space" }, 4542 { F_SGLRDFLASHINT, 4543 "CIM single read from flash space with illegal BEs" }, 4544 { F_BLKWRBOOTINT, "CIM block write to boot space" }, 4545 { F_BLKRDBOOTINT, "CIM block read from boot space" }, 4546 { F_SGLWRBOOTINT, "CIM single write to boot space" }, 4547 { F_SGLRDBOOTINT, 4548 "CIM single read from boot space with illegal BEs" }, 4549 { F_ILLWRBEINT, "CIM illegal write BEs" }, 4550 { F_ILLRDBEINT, "CIM illegal read BEs" }, 4551 { F_ILLRDINT, "CIM illegal read" }, 4552 { F_ILLWRINT, "CIM illegal write" }, 4553 { F_ILLTRANSINT, "CIM illegal transaction" }, 4554 { F_RSVDSPACEINT, "CIM reserved space access" }, 4555 {0} 4556 }; 4557 static const struct intr_info cim_host_upacc_intr_info = { 4558 .name = "CIM_HOST_UPACC_INT_CAUSE", 4559 .cause_reg = A_CIM_HOST_UPACC_INT_CAUSE, 4560 .enable_reg = A_CIM_HOST_UPACC_INT_ENABLE, 4561 .fatal = 0x3fffeeff, 4562 .flags = NONFATAL_IF_DISABLED, 4563 .details = cim_host_upacc_intr_details, 4564 .actions = NULL, 4565 }; 4566 static const struct intr_info cim_pf_host_intr_info = { 4567 .name = "CIM_PF_HOST_INT_CAUSE", 4568 .cause_reg = MYPF_REG(A_CIM_PF_HOST_INT_CAUSE), 4569 .enable_reg = MYPF_REG(A_CIM_PF_HOST_INT_ENABLE), 4570 .fatal = 0, 4571 .flags = 0, 4572 .details = NULL, 4573 .actions = NULL, 4574 }; 4575 u32 val, fw_err; 4576 bool fatal; 4577 4578 /* 4579 * When the Firmware detects an internal error which normally wouldn't 4580 * raise a Host Interrupt, it forces a CIM Timer0 interrupt in order 4581 * to make sure the Host sees the Firmware Crash. So if we have a 4582 * Timer0 interrupt and don't see a Firmware Crash, ignore the Timer0 4583 * interrupt. 4584 */ 4585 fw_err = t4_read_reg(adap, A_PCIE_FW); 4586 val = t4_read_reg(adap, A_CIM_HOST_INT_CAUSE); 4587 if (val & F_TIMER0INT && (!(fw_err & F_PCIE_FW_ERR) || 4588 G_PCIE_FW_EVAL(fw_err) != PCIE_FW_EVAL_CRASH)) { 4589 t4_write_reg(adap, A_CIM_HOST_INT_CAUSE, F_TIMER0INT); 4590 } 4591 4592 fatal = (fw_err & F_PCIE_FW_ERR) != 0; 4593 fatal |= t4_handle_intr(adap, &cim_host_intr_info, 0, verbose); 4594 fatal |= t4_handle_intr(adap, &cim_host_upacc_intr_info, 0, verbose); 4595 fatal |= t4_handle_intr(adap, &cim_pf_host_intr_info, 0, verbose); 4596 if (fatal) 4597 t4_os_cim_err(adap); 4598 4599 return (fatal); 4600 } 4601 4602 /* 4603 * ULP RX interrupt handler. 4604 */ 4605 static bool ulprx_intr_handler(struct adapter *adap, int arg, bool verbose) 4606 { 4607 static const struct intr_details ulprx_intr_details[] = { 4608 /* T5+ */ 4609 { F_SE_CNT_MISMATCH_1, "ULPRX SE count mismatch in channel 1" }, 4610 { F_SE_CNT_MISMATCH_0, "ULPRX SE count mismatch in channel 0" }, 4611 4612 /* T4+ */ 4613 { F_CAUSE_CTX_1, "ULPRX channel 1 context error" }, 4614 { F_CAUSE_CTX_0, "ULPRX channel 0 context error" }, 4615 { 0x007fffff, "ULPRX parity error" }, 4616 { 0 } 4617 }; 4618 static const struct intr_info ulprx_intr_info = { 4619 .name = "ULP_RX_INT_CAUSE", 4620 .cause_reg = A_ULP_RX_INT_CAUSE, 4621 .enable_reg = A_ULP_RX_INT_ENABLE, 4622 .fatal = 0x07ffffff, 4623 .flags = NONFATAL_IF_DISABLED, 4624 .details = ulprx_intr_details, 4625 .actions = NULL, 4626 }; 4627 static const struct intr_info ulprx_intr2_info = { 4628 .name = "ULP_RX_INT_CAUSE_2", 4629 .cause_reg = A_ULP_RX_INT_CAUSE_2, 4630 .enable_reg = A_ULP_RX_INT_ENABLE_2, 4631 .fatal = 0, 4632 .flags = 0, 4633 .details = NULL, 4634 .actions = NULL, 4635 }; 4636 bool fatal = false; 4637 4638 fatal |= t4_handle_intr(adap, &ulprx_intr_info, 0, verbose); 4639 fatal |= t4_handle_intr(adap, &ulprx_intr2_info, 0, verbose); 4640 4641 return (fatal); 4642 } 4643 4644 /* 4645 * ULP TX interrupt handler. 4646 */ 4647 static bool ulptx_intr_handler(struct adapter *adap, int arg, bool verbose) 4648 { 4649 static const struct intr_details ulptx_intr_details[] = { 4650 { F_PBL_BOUND_ERR_CH3, "ULPTX channel 3 PBL out of bounds" }, 4651 { F_PBL_BOUND_ERR_CH2, "ULPTX channel 2 PBL out of bounds" }, 4652 { F_PBL_BOUND_ERR_CH1, "ULPTX channel 1 PBL out of bounds" }, 4653 { F_PBL_BOUND_ERR_CH0, "ULPTX channel 0 PBL out of bounds" }, 4654 { 0x0fffffff, "ULPTX parity error" }, 4655 { 0 } 4656 }; 4657 static const struct intr_info ulptx_intr_info = { 4658 .name = "ULP_TX_INT_CAUSE", 4659 .cause_reg = A_ULP_TX_INT_CAUSE, 4660 .enable_reg = A_ULP_TX_INT_ENABLE, 4661 .fatal = 0x0fffffff, 4662 .flags = NONFATAL_IF_DISABLED, 4663 .details = ulptx_intr_details, 4664 .actions = NULL, 4665 }; 4666 static const struct intr_info ulptx_intr2_info = { 4667 .name = "ULP_TX_INT_CAUSE_2", 4668 .cause_reg = A_ULP_TX_INT_CAUSE_2, 4669 .enable_reg = A_ULP_TX_INT_ENABLE_2, 4670 .fatal = 0xf0, 4671 .flags = NONFATAL_IF_DISABLED, 4672 .details = NULL, 4673 .actions = NULL, 4674 }; 4675 bool fatal = false; 4676 4677 fatal |= t4_handle_intr(adap, &ulptx_intr_info, 0, verbose); 4678 fatal |= t4_handle_intr(adap, &ulptx_intr2_info, 0, verbose); 4679 4680 return (fatal); 4681 } 4682 4683 static bool pmtx_dump_dbg_stats(struct adapter *adap, int arg, bool verbose) 4684 { 4685 int i; 4686 u32 data[17]; 4687 4688 t4_read_indirect(adap, A_PM_TX_DBG_CTRL, A_PM_TX_DBG_DATA, &data[0], 4689 ARRAY_SIZE(data), A_PM_TX_DBG_STAT0); 4690 for (i = 0; i < ARRAY_SIZE(data); i++) { 4691 CH_ALERT(adap, " - PM_TX_DBG_STAT%u (0x%x) = 0x%08x\n", i, 4692 A_PM_TX_DBG_STAT0 + i, data[i]); 4693 } 4694 4695 return (false); 4696 } 4697 4698 /* 4699 * PM TX interrupt handler. 4700 */ 4701 static bool pmtx_intr_handler(struct adapter *adap, int arg, bool verbose) 4702 { 4703 static const struct intr_action pmtx_intr_actions[] = { 4704 { 0xffffffff, 0, pmtx_dump_dbg_stats }, 4705 { 0 }, 4706 }; 4707 static const struct intr_details pmtx_intr_details[] = { 4708 { F_PCMD_LEN_OVFL0, "PMTX channel 0 pcmd too large" }, 4709 { F_PCMD_LEN_OVFL1, "PMTX channel 1 pcmd too large" }, 4710 { F_PCMD_LEN_OVFL2, "PMTX channel 2 pcmd too large" }, 4711 { F_ZERO_C_CMD_ERROR, "PMTX 0-length pcmd" }, 4712 { 0x0f000000, "PMTX icspi FIFO2X Rx framing error" }, 4713 { 0x00f00000, "PMTX icspi FIFO Rx framing error" }, 4714 { 0x000f0000, "PMTX icspi FIFO Tx framing error" }, 4715 { 0x0000f000, "PMTX oespi FIFO Rx framing error" }, 4716 { 0x00000f00, "PMTX oespi FIFO Tx framing error" }, 4717 { 0x000000f0, "PMTX oespi FIFO2X Tx framing error" }, 4718 { F_OESPI_PAR_ERROR, "PMTX oespi parity error" }, 4719 { F_DB_OPTIONS_PAR_ERROR, "PMTX db_options parity error" }, 4720 { F_ICSPI_PAR_ERROR, "PMTX icspi parity error" }, 4721 { F_C_PCMD_PAR_ERROR, "PMTX c_pcmd parity error" }, 4722 { 0 } 4723 }; 4724 static const struct intr_info pmtx_intr_info = { 4725 .name = "PM_TX_INT_CAUSE", 4726 .cause_reg = A_PM_TX_INT_CAUSE, 4727 .enable_reg = A_PM_TX_INT_ENABLE, 4728 .fatal = 0xffffffff, 4729 .flags = 0, 4730 .details = pmtx_intr_details, 4731 .actions = pmtx_intr_actions, 4732 }; 4733 4734 return (t4_handle_intr(adap, &pmtx_intr_info, 0, verbose)); 4735 } 4736 4737 /* 4738 * PM RX interrupt handler. 4739 */ 4740 static bool pmrx_intr_handler(struct adapter *adap, int arg, bool verbose) 4741 { 4742 static const struct intr_details pmrx_intr_details[] = { 4743 /* T6+ */ 4744 { 0x18000000, "PMRX ospi overflow" }, 4745 { F_MA_INTF_SDC_ERR, "PMRX MA interface SDC parity error" }, 4746 { F_BUNDLE_LEN_PARERR, "PMRX bundle len FIFO parity error" }, 4747 { F_BUNDLE_LEN_OVFL, "PMRX bundle len FIFO overflow" }, 4748 { F_SDC_ERR, "PMRX SDC error" }, 4749 4750 /* T4+ */ 4751 { F_ZERO_E_CMD_ERROR, "PMRX 0-length pcmd" }, 4752 { 0x003c0000, "PMRX iespi FIFO2X Rx framing error" }, 4753 { 0x0003c000, "PMRX iespi Rx framing error" }, 4754 { 0x00003c00, "PMRX iespi Tx framing error" }, 4755 { 0x00000300, "PMRX ocspi Rx framing error" }, 4756 { 0x000000c0, "PMRX ocspi Tx framing error" }, 4757 { 0x00000030, "PMRX ocspi FIFO2X Tx framing error" }, 4758 { F_OCSPI_PAR_ERROR, "PMRX ocspi parity error" }, 4759 { F_DB_OPTIONS_PAR_ERROR, "PMRX db_options parity error" }, 4760 { F_IESPI_PAR_ERROR, "PMRX iespi parity error" }, 4761 { F_E_PCMD_PAR_ERROR, "PMRX e_pcmd parity error"}, 4762 { 0 } 4763 }; 4764 static const struct intr_info pmrx_intr_info = { 4765 .name = "PM_RX_INT_CAUSE", 4766 .cause_reg = A_PM_RX_INT_CAUSE, 4767 .enable_reg = A_PM_RX_INT_ENABLE, 4768 .fatal = 0x1fffffff, 4769 .flags = NONFATAL_IF_DISABLED, 4770 .details = pmrx_intr_details, 4771 .actions = NULL, 4772 }; 4773 4774 return (t4_handle_intr(adap, &pmrx_intr_info, 0, verbose)); 4775 } 4776 4777 /* 4778 * CPL switch interrupt handler. 4779 */ 4780 static bool cplsw_intr_handler(struct adapter *adap, int arg, bool verbose) 4781 { 4782 static const struct intr_details cplsw_intr_details[] = { 4783 /* T5+ */ 4784 { F_PERR_CPL_128TO128_1, "CPLSW 128TO128 FIFO1 parity error" }, 4785 { F_PERR_CPL_128TO128_0, "CPLSW 128TO128 FIFO0 parity error" }, 4786 4787 /* T4+ */ 4788 { F_CIM_OP_MAP_PERR, "CPLSW CIM op_map parity error" }, 4789 { F_CIM_OVFL_ERROR, "CPLSW CIM overflow" }, 4790 { F_TP_FRAMING_ERROR, "CPLSW TP framing error" }, 4791 { F_SGE_FRAMING_ERROR, "CPLSW SGE framing error" }, 4792 { F_CIM_FRAMING_ERROR, "CPLSW CIM framing error" }, 4793 { F_ZERO_SWITCH_ERROR, "CPLSW no-switch error" }, 4794 { 0 } 4795 }; 4796 static const struct intr_info cplsw_intr_info = { 4797 .name = "CPL_INTR_CAUSE", 4798 .cause_reg = A_CPL_INTR_CAUSE, 4799 .enable_reg = A_CPL_INTR_ENABLE, 4800 .fatal = 0xff, 4801 .flags = NONFATAL_IF_DISABLED, 4802 .details = cplsw_intr_details, 4803 .actions = NULL, 4804 }; 4805 4806 return (t4_handle_intr(adap, &cplsw_intr_info, 0, verbose)); 4807 } 4808 4809 #define T4_LE_FATAL_MASK (F_PARITYERR | F_UNKNOWNCMD | F_REQQPARERR) 4810 #define T5_LE_FATAL_MASK (T4_LE_FATAL_MASK | F_VFPARERR) 4811 #define T6_LE_PERRCRC_MASK (F_PIPELINEERR | F_CLIPTCAMACCFAIL | \ 4812 F_SRVSRAMACCFAIL | F_CLCAMCRCPARERR | F_CLCAMINTPERR | F_SSRAMINTPERR | \ 4813 F_SRVSRAMPERR | F_VFSRAMPERR | F_TCAMINTPERR | F_TCAMCRCERR | \ 4814 F_HASHTBLMEMACCERR | F_MAIFWRINTPERR | F_HASHTBLMEMCRCERR) 4815 #define T6_LE_FATAL_MASK (T6_LE_PERRCRC_MASK | F_T6_UNKNOWNCMD | \ 4816 F_TCAMACCFAIL | F_HASHTBLACCFAIL | F_CMDTIDERR | F_CMDPRSRINTERR | \ 4817 F_TOTCNTERR | F_CLCAMFIFOERR | F_CLIPSUBERR) 4818 4819 /* 4820 * LE interrupt handler. 4821 */ 4822 static bool le_intr_handler(struct adapter *adap, int arg, bool verbose) 4823 { 4824 static const struct intr_details le_intr_details[] = { 4825 { F_REQQPARERR, "LE request queue parity error" }, 4826 { F_UNKNOWNCMD, "LE unknown command" }, 4827 { F_ACTRGNFULL, "LE active region full" }, 4828 { F_PARITYERR, "LE parity error" }, 4829 { F_LIPMISS, "LE LIP miss" }, 4830 { F_LIP0, "LE 0 LIP error" }, 4831 { 0 } 4832 }; 4833 static const struct intr_details t6_le_intr_details[] = { 4834 { F_CLIPSUBERR, "LE CLIP CAM reverse substitution error" }, 4835 { F_CLCAMFIFOERR, "LE CLIP CAM internal FIFO error" }, 4836 { F_CTCAMINVLDENT, "Invalid IPv6 CLIP TCAM entry" }, 4837 { F_TCAMINVLDENT, "Invalid IPv6 TCAM entry" }, 4838 { F_TOTCNTERR, "LE total active < TCAM count" }, 4839 { F_CMDPRSRINTERR, "LE internal error in parser" }, 4840 { F_CMDTIDERR, "Incorrect tid in LE command" }, 4841 { F_T6_ACTRGNFULL, "LE active region full" }, 4842 { F_T6_ACTCNTIPV6TZERO, "LE IPv6 active open TCAM counter -ve" }, 4843 { F_T6_ACTCNTIPV4TZERO, "LE IPv4 active open TCAM counter -ve" }, 4844 { F_T6_ACTCNTIPV6ZERO, "LE IPv6 active open counter -ve" }, 4845 { F_T6_ACTCNTIPV4ZERO, "LE IPv4 active open counter -ve" }, 4846 { F_HASHTBLACCFAIL, "Hash table read error (proto conflict)" }, 4847 { F_TCAMACCFAIL, "LE TCAM access failure" }, 4848 { F_T6_UNKNOWNCMD, "LE unknown command" }, 4849 { F_T6_LIP0, "LE found 0 LIP during CLIP substitution" }, 4850 { F_T6_LIPMISS, "LE CLIP lookup miss" }, 4851 { T6_LE_PERRCRC_MASK, "LE parity/CRC error" }, 4852 { 0 } 4853 }; 4854 struct intr_info le_intr_info = { 4855 .name = "LE_DB_INT_CAUSE", 4856 .cause_reg = A_LE_DB_INT_CAUSE, 4857 .enable_reg = A_LE_DB_INT_ENABLE, 4858 .fatal = 0, 4859 .flags = NONFATAL_IF_DISABLED, 4860 .details = NULL, 4861 .actions = NULL, 4862 }; 4863 4864 if (chip_id(adap) <= CHELSIO_T5) { 4865 le_intr_info.details = le_intr_details; 4866 le_intr_info.fatal = T5_LE_FATAL_MASK; 4867 } else { 4868 le_intr_info.details = t6_le_intr_details; 4869 le_intr_info.fatal = T6_LE_FATAL_MASK; 4870 } 4871 4872 return (t4_handle_intr(adap, &le_intr_info, 0, verbose)); 4873 } 4874 4875 /* 4876 * MPS interrupt handler. 4877 */ 4878 static bool mps_intr_handler(struct adapter *adap, int arg, bool verbose) 4879 { 4880 static const struct intr_details mps_rx_perr_intr_details[] = { 4881 { 0xffffffff, "MPS Rx parity error" }, 4882 { 0 } 4883 }; 4884 static const struct intr_info mps_rx_perr_intr_info = { 4885 .name = "MPS_RX_PERR_INT_CAUSE", 4886 .cause_reg = A_MPS_RX_PERR_INT_CAUSE, 4887 .enable_reg = A_MPS_RX_PERR_INT_ENABLE, 4888 .fatal = 0xffffffff, 4889 .flags = NONFATAL_IF_DISABLED, 4890 .details = mps_rx_perr_intr_details, 4891 .actions = NULL, 4892 }; 4893 static const struct intr_details mps_tx_intr_details[] = { 4894 { F_PORTERR, "MPS Tx destination port is disabled" }, 4895 { F_FRMERR, "MPS Tx framing error" }, 4896 { F_SECNTERR, "MPS Tx SOP/EOP error" }, 4897 { F_BUBBLE, "MPS Tx underflow" }, 4898 { V_TXDESCFIFO(M_TXDESCFIFO), "MPS Tx desc FIFO parity error" }, 4899 { V_TXDATAFIFO(M_TXDATAFIFO), "MPS Tx data FIFO parity error" }, 4900 { F_NCSIFIFO, "MPS Tx NC-SI FIFO parity error" }, 4901 { V_TPFIFO(M_TPFIFO), "MPS Tx TP FIFO parity error" }, 4902 { 0 } 4903 }; 4904 static const struct intr_info mps_tx_intr_info = { 4905 .name = "MPS_TX_INT_CAUSE", 4906 .cause_reg = A_MPS_TX_INT_CAUSE, 4907 .enable_reg = A_MPS_TX_INT_ENABLE, 4908 .fatal = 0x1ffff, 4909 .flags = NONFATAL_IF_DISABLED, 4910 .details = mps_tx_intr_details, 4911 .actions = NULL, 4912 }; 4913 static const struct intr_details mps_trc_intr_details[] = { 4914 { F_MISCPERR, "MPS TRC misc parity error" }, 4915 { V_PKTFIFO(M_PKTFIFO), "MPS TRC packet FIFO parity error" }, 4916 { V_FILTMEM(M_FILTMEM), "MPS TRC filter parity error" }, 4917 { 0 } 4918 }; 4919 static const struct intr_info mps_trc_intr_info = { 4920 .name = "MPS_TRC_INT_CAUSE", 4921 .cause_reg = A_MPS_TRC_INT_CAUSE, 4922 .enable_reg = A_MPS_TRC_INT_ENABLE, 4923 .fatal = F_MISCPERR | V_PKTFIFO(M_PKTFIFO) | V_FILTMEM(M_FILTMEM), 4924 .flags = 0, 4925 .details = mps_trc_intr_details, 4926 .actions = NULL, 4927 }; 4928 static const struct intr_details mps_stat_sram_intr_details[] = { 4929 { 0xffffffff, "MPS statistics SRAM parity error" }, 4930 { 0 } 4931 }; 4932 static const struct intr_info mps_stat_sram_intr_info = { 4933 .name = "MPS_STAT_PERR_INT_CAUSE_SRAM", 4934 .cause_reg = A_MPS_STAT_PERR_INT_CAUSE_SRAM, 4935 .enable_reg = A_MPS_STAT_PERR_INT_ENABLE_SRAM, 4936 .fatal = 0x1fffffff, 4937 .flags = NONFATAL_IF_DISABLED, 4938 .details = mps_stat_sram_intr_details, 4939 .actions = NULL, 4940 }; 4941 static const struct intr_details mps_stat_tx_intr_details[] = { 4942 { 0xffffff, "MPS statistics Tx FIFO parity error" }, 4943 { 0 } 4944 }; 4945 static const struct intr_info mps_stat_tx_intr_info = { 4946 .name = "MPS_STAT_PERR_INT_CAUSE_TX_FIFO", 4947 .cause_reg = A_MPS_STAT_PERR_INT_CAUSE_TX_FIFO, 4948 .enable_reg = A_MPS_STAT_PERR_INT_ENABLE_TX_FIFO, 4949 .fatal = 0xffffff, 4950 .flags = NONFATAL_IF_DISABLED, 4951 .details = mps_stat_tx_intr_details, 4952 .actions = NULL, 4953 }; 4954 static const struct intr_details mps_stat_rx_intr_details[] = { 4955 { 0xffffff, "MPS statistics Rx FIFO parity error" }, 4956 { 0 } 4957 }; 4958 static const struct intr_info mps_stat_rx_intr_info = { 4959 .name = "MPS_STAT_PERR_INT_CAUSE_RX_FIFO", 4960 .cause_reg = A_MPS_STAT_PERR_INT_CAUSE_RX_FIFO, 4961 .enable_reg = A_MPS_STAT_PERR_INT_ENABLE_RX_FIFO, 4962 .fatal = 0xffffff, 4963 .flags = 0, 4964 .details = mps_stat_rx_intr_details, 4965 .actions = NULL, 4966 }; 4967 static const struct intr_details mps_cls_intr_details[] = { 4968 { F_HASHSRAM, "MPS hash SRAM parity error" }, 4969 { F_MATCHTCAM, "MPS match TCAM parity error" }, 4970 { F_MATCHSRAM, "MPS match SRAM parity error" }, 4971 { 0 } 4972 }; 4973 static const struct intr_info mps_cls_intr_info = { 4974 .name = "MPS_CLS_INT_CAUSE", 4975 .cause_reg = A_MPS_CLS_INT_CAUSE, 4976 .enable_reg = A_MPS_CLS_INT_ENABLE, 4977 .fatal = F_MATCHSRAM | F_MATCHTCAM | F_HASHSRAM, 4978 .flags = 0, 4979 .details = mps_cls_intr_details, 4980 .actions = NULL, 4981 }; 4982 static const struct intr_details mps_stat_sram1_intr_details[] = { 4983 { 0xff, "MPS statistics SRAM1 parity error" }, 4984 { 0 } 4985 }; 4986 static const struct intr_info mps_stat_sram1_intr_info = { 4987 .name = "MPS_STAT_PERR_INT_CAUSE_SRAM1", 4988 .cause_reg = A_MPS_STAT_PERR_INT_CAUSE_SRAM1, 4989 .enable_reg = A_MPS_STAT_PERR_INT_ENABLE_SRAM1, 4990 .fatal = 0xff, 4991 .flags = 0, 4992 .details = mps_stat_sram1_intr_details, 4993 .actions = NULL, 4994 }; 4995 4996 bool fatal; 4997 4998 fatal = false; 4999 fatal |= t4_handle_intr(adap, &mps_rx_perr_intr_info, 0, verbose); 5000 fatal |= t4_handle_intr(adap, &mps_tx_intr_info, 0, verbose); 5001 fatal |= t4_handle_intr(adap, &mps_trc_intr_info, 0, verbose); 5002 fatal |= t4_handle_intr(adap, &mps_stat_sram_intr_info, 0, verbose); 5003 fatal |= t4_handle_intr(adap, &mps_stat_tx_intr_info, 0, verbose); 5004 fatal |= t4_handle_intr(adap, &mps_stat_rx_intr_info, 0, verbose); 5005 fatal |= t4_handle_intr(adap, &mps_cls_intr_info, 0, verbose); 5006 if (chip_id(adap) > CHELSIO_T4) { 5007 fatal |= t4_handle_intr(adap, &mps_stat_sram1_intr_info, 0, 5008 verbose); 5009 } 5010 5011 t4_write_reg(adap, A_MPS_INT_CAUSE, is_t4(adap) ? 0 : 0xffffffff); 5012 t4_read_reg(adap, A_MPS_INT_CAUSE); /* flush */ 5013 5014 return (fatal); 5015 5016 } 5017 5018 /* 5019 * EDC/MC interrupt handler. 5020 */ 5021 static bool mem_intr_handler(struct adapter *adap, int idx, bool verbose) 5022 { 5023 static const char name[4][5] = { "EDC0", "EDC1", "MC0", "MC1" }; 5024 unsigned int count_reg, v; 5025 static const struct intr_details mem_intr_details[] = { 5026 { F_ECC_UE_INT_CAUSE, "Uncorrectable ECC data error(s)" }, 5027 { F_ECC_CE_INT_CAUSE, "Correctable ECC data error(s)" }, 5028 { F_PERR_INT_CAUSE, "FIFO parity error" }, 5029 { 0 } 5030 }; 5031 struct intr_info ii = { 5032 .fatal = F_PERR_INT_CAUSE | F_ECC_UE_INT_CAUSE, 5033 .details = mem_intr_details, 5034 .flags = 0, 5035 .actions = NULL, 5036 }; 5037 bool fatal; 5038 5039 switch (idx) { 5040 case MEM_EDC0: 5041 ii.name = "EDC0_INT_CAUSE"; 5042 ii.cause_reg = EDC_REG(A_EDC_INT_CAUSE, 0); 5043 ii.enable_reg = EDC_REG(A_EDC_INT_ENABLE, 0); 5044 count_reg = EDC_REG(A_EDC_ECC_STATUS, 0); 5045 break; 5046 case MEM_EDC1: 5047 ii.name = "EDC1_INT_CAUSE"; 5048 ii.cause_reg = EDC_REG(A_EDC_INT_CAUSE, 1); 5049 ii.enable_reg = EDC_REG(A_EDC_INT_ENABLE, 1); 5050 count_reg = EDC_REG(A_EDC_ECC_STATUS, 1); 5051 break; 5052 case MEM_MC0: 5053 ii.name = "MC0_INT_CAUSE"; 5054 if (is_t4(adap)) { 5055 ii.cause_reg = A_MC_INT_CAUSE; 5056 ii.enable_reg = A_MC_INT_ENABLE; 5057 count_reg = A_MC_ECC_STATUS; 5058 } else { 5059 ii.cause_reg = A_MC_P_INT_CAUSE; 5060 ii.enable_reg = A_MC_P_INT_ENABLE; 5061 count_reg = A_MC_P_ECC_STATUS; 5062 } 5063 break; 5064 case MEM_MC1: 5065 ii.name = "MC1_INT_CAUSE"; 5066 ii.cause_reg = MC_REG(A_MC_P_INT_CAUSE, 1); 5067 ii.enable_reg = MC_REG(A_MC_P_INT_ENABLE, 1); 5068 count_reg = MC_REG(A_MC_P_ECC_STATUS, 1); 5069 break; 5070 } 5071 5072 fatal = t4_handle_intr(adap, &ii, 0, verbose); 5073 5074 v = t4_read_reg(adap, count_reg); 5075 if (v != 0) { 5076 if (G_ECC_UECNT(v) != 0) { 5077 CH_ALERT(adap, 5078 "%s: %u uncorrectable ECC data error(s)\n", 5079 name[idx], G_ECC_UECNT(v)); 5080 } 5081 if (G_ECC_CECNT(v) != 0) { 5082 if (idx <= MEM_EDC1) 5083 t4_edc_err_read(adap, idx); 5084 CH_WARN_RATELIMIT(adap, 5085 "%s: %u correctable ECC data error(s)\n", 5086 name[idx], G_ECC_CECNT(v)); 5087 } 5088 t4_write_reg(adap, count_reg, 0xffffffff); 5089 } 5090 5091 return (fatal); 5092 } 5093 5094 static bool ma_wrap_status(struct adapter *adap, int arg, bool verbose) 5095 { 5096 u32 v; 5097 5098 v = t4_read_reg(adap, A_MA_INT_WRAP_STATUS); 5099 CH_ALERT(adap, 5100 "MA address wrap-around error by client %u to address %#x\n", 5101 G_MEM_WRAP_CLIENT_NUM(v), G_MEM_WRAP_ADDRESS(v) << 4); 5102 t4_write_reg(adap, A_MA_INT_WRAP_STATUS, v); 5103 5104 return (false); 5105 } 5106 5107 5108 /* 5109 * MA interrupt handler. 5110 */ 5111 static bool ma_intr_handler(struct adapter *adap, int arg, bool verbose) 5112 { 5113 static const struct intr_action ma_intr_actions[] = { 5114 { F_MEM_WRAP_INT_CAUSE, 0, ma_wrap_status }, 5115 { 0 }, 5116 }; 5117 static const struct intr_info ma_intr_info = { 5118 .name = "MA_INT_CAUSE", 5119 .cause_reg = A_MA_INT_CAUSE, 5120 .enable_reg = A_MA_INT_ENABLE, 5121 .fatal = F_MEM_PERR_INT_CAUSE | F_MEM_TO_INT_CAUSE, 5122 .flags = NONFATAL_IF_DISABLED, 5123 .details = NULL, 5124 .actions = ma_intr_actions, 5125 }; 5126 static const struct intr_info ma_perr_status1 = { 5127 .name = "MA_PARITY_ERROR_STATUS1", 5128 .cause_reg = A_MA_PARITY_ERROR_STATUS1, 5129 .enable_reg = A_MA_PARITY_ERROR_ENABLE1, 5130 .fatal = 0xffffffff, 5131 .flags = 0, 5132 .details = NULL, 5133 .actions = NULL, 5134 }; 5135 static const struct intr_info ma_perr_status2 = { 5136 .name = "MA_PARITY_ERROR_STATUS2", 5137 .cause_reg = A_MA_PARITY_ERROR_STATUS2, 5138 .enable_reg = A_MA_PARITY_ERROR_ENABLE2, 5139 .fatal = 0xffffffff, 5140 .flags = 0, 5141 .details = NULL, 5142 .actions = NULL, 5143 }; 5144 bool fatal; 5145 5146 fatal = false; 5147 fatal |= t4_handle_intr(adap, &ma_intr_info, 0, verbose); 5148 fatal |= t4_handle_intr(adap, &ma_perr_status1, 0, verbose); 5149 if (chip_id(adap) > CHELSIO_T4) 5150 fatal |= t4_handle_intr(adap, &ma_perr_status2, 0, verbose); 5151 5152 return (fatal); 5153 } 5154 5155 /* 5156 * SMB interrupt handler. 5157 */ 5158 static bool smb_intr_handler(struct adapter *adap, int arg, bool verbose) 5159 { 5160 static const struct intr_details smb_intr_details[] = { 5161 { F_MSTTXFIFOPARINT, "SMB master Tx FIFO parity error" }, 5162 { F_MSTRXFIFOPARINT, "SMB master Rx FIFO parity error" }, 5163 { F_SLVFIFOPARINT, "SMB slave FIFO parity error" }, 5164 { 0 } 5165 }; 5166 static const struct intr_info smb_intr_info = { 5167 .name = "SMB_INT_CAUSE", 5168 .cause_reg = A_SMB_INT_CAUSE, 5169 .enable_reg = A_SMB_INT_ENABLE, 5170 .fatal = F_SLVFIFOPARINT | F_MSTRXFIFOPARINT | F_MSTTXFIFOPARINT, 5171 .flags = 0, 5172 .details = smb_intr_details, 5173 .actions = NULL, 5174 }; 5175 5176 return (t4_handle_intr(adap, &smb_intr_info, 0, verbose)); 5177 } 5178 5179 /* 5180 * NC-SI interrupt handler. 5181 */ 5182 static bool ncsi_intr_handler(struct adapter *adap, int arg, bool verbose) 5183 { 5184 static const struct intr_details ncsi_intr_details[] = { 5185 { F_CIM_DM_PRTY_ERR, "NC-SI CIM parity error" }, 5186 { F_MPS_DM_PRTY_ERR, "NC-SI MPS parity error" }, 5187 { F_TXFIFO_PRTY_ERR, "NC-SI Tx FIFO parity error" }, 5188 { F_RXFIFO_PRTY_ERR, "NC-SI Rx FIFO parity error" }, 5189 { 0 } 5190 }; 5191 static const struct intr_info ncsi_intr_info = { 5192 .name = "NCSI_INT_CAUSE", 5193 .cause_reg = A_NCSI_INT_CAUSE, 5194 .enable_reg = A_NCSI_INT_ENABLE, 5195 .fatal = F_RXFIFO_PRTY_ERR | F_TXFIFO_PRTY_ERR | 5196 F_MPS_DM_PRTY_ERR | F_CIM_DM_PRTY_ERR, 5197 .flags = 0, 5198 .details = ncsi_intr_details, 5199 .actions = NULL, 5200 }; 5201 5202 return (t4_handle_intr(adap, &ncsi_intr_info, 0, verbose)); 5203 } 5204 5205 /* 5206 * MAC interrupt handler. 5207 */ 5208 static bool mac_intr_handler(struct adapter *adap, int port, bool verbose) 5209 { 5210 static const struct intr_details mac_intr_details[] = { 5211 { F_TXFIFO_PRTY_ERR, "MAC Tx FIFO parity error" }, 5212 { F_RXFIFO_PRTY_ERR, "MAC Rx FIFO parity error" }, 5213 { 0 } 5214 }; 5215 char name[32]; 5216 struct intr_info ii; 5217 bool fatal = false; 5218 5219 if (is_t4(adap)) { 5220 snprintf(name, sizeof(name), "XGMAC_PORT%u_INT_CAUSE", port); 5221 ii.name = &name[0]; 5222 ii.cause_reg = PORT_REG(port, A_XGMAC_PORT_INT_CAUSE); 5223 ii.enable_reg = PORT_REG(port, A_XGMAC_PORT_INT_EN); 5224 ii.fatal = F_TXFIFO_PRTY_ERR | F_RXFIFO_PRTY_ERR; 5225 ii.flags = 0; 5226 ii.details = mac_intr_details; 5227 ii.actions = NULL; 5228 } else { 5229 snprintf(name, sizeof(name), "MAC_PORT%u_INT_CAUSE", port); 5230 ii.name = &name[0]; 5231 ii.cause_reg = T5_PORT_REG(port, A_MAC_PORT_INT_CAUSE); 5232 ii.enable_reg = T5_PORT_REG(port, A_MAC_PORT_INT_EN); 5233 ii.fatal = F_TXFIFO_PRTY_ERR | F_RXFIFO_PRTY_ERR; 5234 ii.flags = 0; 5235 ii.details = mac_intr_details; 5236 ii.actions = NULL; 5237 } 5238 fatal |= t4_handle_intr(adap, &ii, 0, verbose); 5239 5240 if (chip_id(adap) >= CHELSIO_T5) { 5241 snprintf(name, sizeof(name), "MAC_PORT%u_PERR_INT_CAUSE", port); 5242 ii.name = &name[0]; 5243 ii.cause_reg = T5_PORT_REG(port, A_MAC_PORT_PERR_INT_CAUSE); 5244 ii.enable_reg = T5_PORT_REG(port, A_MAC_PORT_PERR_INT_EN); 5245 ii.fatal = 0; 5246 ii.flags = 0; 5247 ii.details = NULL; 5248 ii.actions = NULL; 5249 fatal |= t4_handle_intr(adap, &ii, 0, verbose); 5250 } 5251 5252 if (chip_id(adap) >= CHELSIO_T6) { 5253 snprintf(name, sizeof(name), "MAC_PORT%u_PERR_INT_CAUSE_100G", port); 5254 ii.name = &name[0]; 5255 ii.cause_reg = T5_PORT_REG(port, A_MAC_PORT_PERR_INT_CAUSE_100G); 5256 ii.enable_reg = T5_PORT_REG(port, A_MAC_PORT_PERR_INT_EN_100G); 5257 ii.fatal = 0; 5258 ii.flags = 0; 5259 ii.details = NULL; 5260 ii.actions = NULL; 5261 fatal |= t4_handle_intr(adap, &ii, 0, verbose); 5262 } 5263 5264 return (fatal); 5265 } 5266 5267 static bool pl_timeout_status(struct adapter *adap, int arg, bool verbose) 5268 { 5269 5270 CH_ALERT(adap, " PL_TIMEOUT_STATUS 0x%08x 0x%08x\n", 5271 t4_read_reg(adap, A_PL_TIMEOUT_STATUS0), 5272 t4_read_reg(adap, A_PL_TIMEOUT_STATUS1)); 5273 5274 return (false); 5275 } 5276 5277 static bool plpl_intr_handler(struct adapter *adap, int arg, bool verbose) 5278 { 5279 static const struct intr_action plpl_intr_actions[] = { 5280 { F_TIMEOUT, 0, pl_timeout_status }, 5281 { 0 }, 5282 }; 5283 static const struct intr_details plpl_intr_details[] = { 5284 { F_PL_BUSPERR, "Bus parity error" }, 5285 { F_FATALPERR, "Fatal parity error" }, 5286 { F_INVALIDACCESS, "Global reserved memory access" }, 5287 { F_TIMEOUT, "Bus timeout" }, 5288 { F_PLERR, "Module reserved access" }, 5289 { F_PERRVFID, "VFID_MAP parity error" }, 5290 { 0 } 5291 }; 5292 static const struct intr_info plpl_intr_info = { 5293 .name = "PL_PL_INT_CAUSE", 5294 .cause_reg = A_PL_PL_INT_CAUSE, 5295 .enable_reg = A_PL_PL_INT_ENABLE, 5296 .fatal = F_FATALPERR | F_PERRVFID, 5297 .flags = NONFATAL_IF_DISABLED, 5298 .details = plpl_intr_details, 5299 .actions = plpl_intr_actions, 5300 }; 5301 5302 return (t4_handle_intr(adap, &plpl_intr_info, 0, verbose)); 5303 } 5304 5305 /** 5306 * t4_slow_intr_handler - control path interrupt handler 5307 * @adap: the adapter 5308 * @verbose: increased verbosity, for debug 5309 * 5310 * T4 interrupt handler for non-data global interrupt events, e.g., errors. 5311 * The designation 'slow' is because it involves register reads, while 5312 * data interrupts typically don't involve any MMIOs. 5313 */ 5314 bool t4_slow_intr_handler(struct adapter *adap, bool verbose) 5315 { 5316 static const struct intr_details pl_intr_details[] = { 5317 { F_MC1, "MC1" }, 5318 { F_UART, "UART" }, 5319 { F_ULP_TX, "ULP TX" }, 5320 { F_SGE, "SGE" }, 5321 { F_HMA, "HMA" }, 5322 { F_CPL_SWITCH, "CPL Switch" }, 5323 { F_ULP_RX, "ULP RX" }, 5324 { F_PM_RX, "PM RX" }, 5325 { F_PM_TX, "PM TX" }, 5326 { F_MA, "MA" }, 5327 { F_TP, "TP" }, 5328 { F_LE, "LE" }, 5329 { F_EDC1, "EDC1" }, 5330 { F_EDC0, "EDC0" }, 5331 { F_MC, "MC0" }, 5332 { F_PCIE, "PCIE" }, 5333 { F_PMU, "PMU" }, 5334 { F_MAC3, "MAC3" }, 5335 { F_MAC2, "MAC2" }, 5336 { F_MAC1, "MAC1" }, 5337 { F_MAC0, "MAC0" }, 5338 { F_SMB, "SMB" }, 5339 { F_SF, "SF" }, 5340 { F_PL, "PL" }, 5341 { F_NCSI, "NC-SI" }, 5342 { F_MPS, "MPS" }, 5343 { F_MI, "MI" }, 5344 { F_DBG, "DBG" }, 5345 { F_I2CM, "I2CM" }, 5346 { F_CIM, "CIM" }, 5347 { 0 } 5348 }; 5349 static const struct intr_info pl_perr_cause = { 5350 .name = "PL_PERR_CAUSE", 5351 .cause_reg = A_PL_PERR_CAUSE, 5352 .enable_reg = A_PL_PERR_ENABLE, 5353 .fatal = 0xffffffff, 5354 .flags = 0, 5355 .details = pl_intr_details, 5356 .actions = NULL, 5357 }; 5358 static const struct intr_action pl_intr_action[] = { 5359 { F_MC1, MEM_MC1, mem_intr_handler }, 5360 { F_ULP_TX, -1, ulptx_intr_handler }, 5361 { F_SGE, -1, sge_intr_handler }, 5362 { F_CPL_SWITCH, -1, cplsw_intr_handler }, 5363 { F_ULP_RX, -1, ulprx_intr_handler }, 5364 { F_PM_RX, -1, pmrx_intr_handler}, 5365 { F_PM_TX, -1, pmtx_intr_handler}, 5366 { F_MA, -1, ma_intr_handler }, 5367 { F_TP, -1, tp_intr_handler }, 5368 { F_LE, -1, le_intr_handler }, 5369 { F_EDC1, MEM_EDC1, mem_intr_handler }, 5370 { F_EDC0, MEM_EDC0, mem_intr_handler }, 5371 { F_MC0, MEM_MC0, mem_intr_handler }, 5372 { F_PCIE, -1, pcie_intr_handler }, 5373 { F_MAC3, 3, mac_intr_handler}, 5374 { F_MAC2, 2, mac_intr_handler}, 5375 { F_MAC1, 1, mac_intr_handler}, 5376 { F_MAC0, 0, mac_intr_handler}, 5377 { F_SMB, -1, smb_intr_handler}, 5378 { F_PL, -1, plpl_intr_handler }, 5379 { F_NCSI, -1, ncsi_intr_handler}, 5380 { F_MPS, -1, mps_intr_handler }, 5381 { F_CIM, -1, cim_intr_handler }, 5382 { 0 } 5383 }; 5384 static const struct intr_info pl_intr_info = { 5385 .name = "PL_INT_CAUSE", 5386 .cause_reg = A_PL_INT_CAUSE, 5387 .enable_reg = A_PL_INT_ENABLE, 5388 .fatal = 0, 5389 .flags = 0, 5390 .details = pl_intr_details, 5391 .actions = pl_intr_action, 5392 }; 5393 u32 perr; 5394 5395 perr = t4_read_reg(adap, pl_perr_cause.cause_reg); 5396 if (verbose || perr != 0) { 5397 t4_show_intr_info(adap, &pl_perr_cause, perr); 5398 if (perr != 0) 5399 t4_write_reg(adap, pl_perr_cause.cause_reg, perr); 5400 if (verbose) 5401 perr |= t4_read_reg(adap, pl_intr_info.enable_reg); 5402 } 5403 5404 return (t4_handle_intr(adap, &pl_intr_info, perr, verbose)); 5405 } 5406 5407 #define PF_INTR_MASK (F_PFSW | F_PFCIM) 5408 5409 /** 5410 * t4_intr_enable - enable interrupts 5411 * @adapter: the adapter whose interrupts should be enabled 5412 * 5413 * Enable PF-specific interrupts for the calling function and the top-level 5414 * interrupt concentrator for global interrupts. Interrupts are already 5415 * enabled at each module, here we just enable the roots of the interrupt 5416 * hierarchies. 5417 * 5418 * Note: this function should be called only when the driver manages 5419 * non PF-specific interrupts from the various HW modules. Only one PCI 5420 * function at a time should be doing this. 5421 */ 5422 void t4_intr_enable(struct adapter *adap) 5423 { 5424 u32 val = 0; 5425 5426 if (chip_id(adap) <= CHELSIO_T5) 5427 val = F_ERR_DROPPED_DB | F_ERR_EGR_CTXT_PRIO | F_DBFIFO_HP_INT; 5428 else 5429 val = F_ERR_PCIE_ERROR0 | F_ERR_PCIE_ERROR1 | F_FATAL_WRE_LEN; 5430 val |= F_ERR_CPL_EXCEED_IQE_SIZE | F_ERR_INVALID_CIDX_INC | 5431 F_ERR_CPL_OPCODE_0 | F_ERR_DATA_CPL_ON_HIGH_QID1 | 5432 F_INGRESS_SIZE_ERR | F_ERR_DATA_CPL_ON_HIGH_QID0 | 5433 F_ERR_BAD_DB_PIDX3 | F_ERR_BAD_DB_PIDX2 | F_ERR_BAD_DB_PIDX1 | 5434 F_ERR_BAD_DB_PIDX0 | F_ERR_ING_CTXT_PRIO | F_DBFIFO_LP_INT | 5435 F_EGRESS_SIZE_ERR; 5436 t4_set_reg_field(adap, A_SGE_INT_ENABLE3, val, val); 5437 t4_write_reg(adap, MYPF_REG(A_PL_PF_INT_ENABLE), PF_INTR_MASK); 5438 t4_set_reg_field(adap, A_PL_INT_ENABLE, F_SF | F_I2CM, 0); 5439 t4_set_reg_field(adap, A_PL_INT_MAP0, 0, 1 << adap->pf); 5440 } 5441 5442 /** 5443 * t4_intr_disable - disable interrupts 5444 * @adap: the adapter whose interrupts should be disabled 5445 * 5446 * Disable interrupts. We only disable the top-level interrupt 5447 * concentrators. The caller must be a PCI function managing global 5448 * interrupts. 5449 */ 5450 void t4_intr_disable(struct adapter *adap) 5451 { 5452 5453 t4_write_reg(adap, MYPF_REG(A_PL_PF_INT_ENABLE), 0); 5454 t4_set_reg_field(adap, A_PL_INT_MAP0, 1 << adap->pf, 0); 5455 } 5456 5457 /** 5458 * hash_mac_addr - return the hash value of a MAC address 5459 * @addr: the 48-bit Ethernet MAC address 5460 * 5461 * Hashes a MAC address according to the hash function used by HW inexact 5462 * (hash) address matching. 5463 */ 5464 static int hash_mac_addr(const u8 *addr) 5465 { 5466 u32 a = ((u32)addr[0] << 16) | ((u32)addr[1] << 8) | addr[2]; 5467 u32 b = ((u32)addr[3] << 16) | ((u32)addr[4] << 8) | addr[5]; 5468 a ^= b; 5469 a ^= (a >> 12); 5470 a ^= (a >> 6); 5471 return a & 0x3f; 5472 } 5473 5474 /** 5475 * t4_config_rss_range - configure a portion of the RSS mapping table 5476 * @adapter: the adapter 5477 * @mbox: mbox to use for the FW command 5478 * @viid: virtual interface whose RSS subtable is to be written 5479 * @start: start entry in the table to write 5480 * @n: how many table entries to write 5481 * @rspq: values for the "response queue" (Ingress Queue) lookup table 5482 * @nrspq: number of values in @rspq 5483 * 5484 * Programs the selected part of the VI's RSS mapping table with the 5485 * provided values. If @nrspq < @n the supplied values are used repeatedly 5486 * until the full table range is populated. 5487 * 5488 * The caller must ensure the values in @rspq are in the range allowed for 5489 * @viid. 5490 */ 5491 int t4_config_rss_range(struct adapter *adapter, int mbox, unsigned int viid, 5492 int start, int n, const u16 *rspq, unsigned int nrspq) 5493 { 5494 int ret; 5495 const u16 *rsp = rspq; 5496 const u16 *rsp_end = rspq + nrspq; 5497 struct fw_rss_ind_tbl_cmd cmd; 5498 5499 memset(&cmd, 0, sizeof(cmd)); 5500 cmd.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_RSS_IND_TBL_CMD) | 5501 F_FW_CMD_REQUEST | F_FW_CMD_WRITE | 5502 V_FW_RSS_IND_TBL_CMD_VIID(viid)); 5503 cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd)); 5504 5505 /* 5506 * Each firmware RSS command can accommodate up to 32 RSS Ingress 5507 * Queue Identifiers. These Ingress Queue IDs are packed three to 5508 * a 32-bit word as 10-bit values with the upper remaining 2 bits 5509 * reserved. 5510 */ 5511 while (n > 0) { 5512 int nq = min(n, 32); 5513 int nq_packed = 0; 5514 __be32 *qp = &cmd.iq0_to_iq2; 5515 5516 /* 5517 * Set up the firmware RSS command header to send the next 5518 * "nq" Ingress Queue IDs to the firmware. 5519 */ 5520 cmd.niqid = cpu_to_be16(nq); 5521 cmd.startidx = cpu_to_be16(start); 5522 5523 /* 5524 * "nq" more done for the start of the next loop. 5525 */ 5526 start += nq; 5527 n -= nq; 5528 5529 /* 5530 * While there are still Ingress Queue IDs to stuff into the 5531 * current firmware RSS command, retrieve them from the 5532 * Ingress Queue ID array and insert them into the command. 5533 */ 5534 while (nq > 0) { 5535 /* 5536 * Grab up to the next 3 Ingress Queue IDs (wrapping 5537 * around the Ingress Queue ID array if necessary) and 5538 * insert them into the firmware RSS command at the 5539 * current 3-tuple position within the commad. 5540 */ 5541 u16 qbuf[3]; 5542 u16 *qbp = qbuf; 5543 int nqbuf = min(3, nq); 5544 5545 nq -= nqbuf; 5546 qbuf[0] = qbuf[1] = qbuf[2] = 0; 5547 while (nqbuf && nq_packed < 32) { 5548 nqbuf--; 5549 nq_packed++; 5550 *qbp++ = *rsp++; 5551 if (rsp >= rsp_end) 5552 rsp = rspq; 5553 } 5554 *qp++ = cpu_to_be32(V_FW_RSS_IND_TBL_CMD_IQ0(qbuf[0]) | 5555 V_FW_RSS_IND_TBL_CMD_IQ1(qbuf[1]) | 5556 V_FW_RSS_IND_TBL_CMD_IQ2(qbuf[2])); 5557 } 5558 5559 /* 5560 * Send this portion of the RRS table update to the firmware; 5561 * bail out on any errors. 5562 */ 5563 ret = t4_wr_mbox(adapter, mbox, &cmd, sizeof(cmd), NULL); 5564 if (ret) 5565 return ret; 5566 } 5567 return 0; 5568 } 5569 5570 /** 5571 * t4_config_glbl_rss - configure the global RSS mode 5572 * @adapter: the adapter 5573 * @mbox: mbox to use for the FW command 5574 * @mode: global RSS mode 5575 * @flags: mode-specific flags 5576 * 5577 * Sets the global RSS mode. 5578 */ 5579 int t4_config_glbl_rss(struct adapter *adapter, int mbox, unsigned int mode, 5580 unsigned int flags) 5581 { 5582 struct fw_rss_glb_config_cmd c; 5583 5584 memset(&c, 0, sizeof(c)); 5585 c.op_to_write = cpu_to_be32(V_FW_CMD_OP(FW_RSS_GLB_CONFIG_CMD) | 5586 F_FW_CMD_REQUEST | F_FW_CMD_WRITE); 5587 c.retval_len16 = cpu_to_be32(FW_LEN16(c)); 5588 if (mode == FW_RSS_GLB_CONFIG_CMD_MODE_MANUAL) { 5589 c.u.manual.mode_pkd = 5590 cpu_to_be32(V_FW_RSS_GLB_CONFIG_CMD_MODE(mode)); 5591 } else if (mode == FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL) { 5592 c.u.basicvirtual.mode_keymode = 5593 cpu_to_be32(V_FW_RSS_GLB_CONFIG_CMD_MODE(mode)); 5594 c.u.basicvirtual.synmapen_to_hashtoeplitz = cpu_to_be32(flags); 5595 } else 5596 return -EINVAL; 5597 return t4_wr_mbox(adapter, mbox, &c, sizeof(c), NULL); 5598 } 5599 5600 /** 5601 * t4_config_vi_rss - configure per VI RSS settings 5602 * @adapter: the adapter 5603 * @mbox: mbox to use for the FW command 5604 * @viid: the VI id 5605 * @flags: RSS flags 5606 * @defq: id of the default RSS queue for the VI. 5607 * @skeyidx: RSS secret key table index for non-global mode 5608 * @skey: RSS vf_scramble key for VI. 5609 * 5610 * Configures VI-specific RSS properties. 5611 */ 5612 int t4_config_vi_rss(struct adapter *adapter, int mbox, unsigned int viid, 5613 unsigned int flags, unsigned int defq, unsigned int skeyidx, 5614 unsigned int skey) 5615 { 5616 struct fw_rss_vi_config_cmd c; 5617 5618 memset(&c, 0, sizeof(c)); 5619 c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_RSS_VI_CONFIG_CMD) | 5620 F_FW_CMD_REQUEST | F_FW_CMD_WRITE | 5621 V_FW_RSS_VI_CONFIG_CMD_VIID(viid)); 5622 c.retval_len16 = cpu_to_be32(FW_LEN16(c)); 5623 c.u.basicvirtual.defaultq_to_udpen = cpu_to_be32(flags | 5624 V_FW_RSS_VI_CONFIG_CMD_DEFAULTQ(defq)); 5625 c.u.basicvirtual.secretkeyidx_pkd = cpu_to_be32( 5626 V_FW_RSS_VI_CONFIG_CMD_SECRETKEYIDX(skeyidx)); 5627 c.u.basicvirtual.secretkeyxor = cpu_to_be32(skey); 5628 5629 return t4_wr_mbox(adapter, mbox, &c, sizeof(c), NULL); 5630 } 5631 5632 /* Read an RSS table row */ 5633 static int rd_rss_row(struct adapter *adap, int row, u32 *val) 5634 { 5635 t4_write_reg(adap, A_TP_RSS_LKP_TABLE, 0xfff00000 | row); 5636 return t4_wait_op_done_val(adap, A_TP_RSS_LKP_TABLE, F_LKPTBLROWVLD, 1, 5637 5, 0, val); 5638 } 5639 5640 /** 5641 * t4_read_rss - read the contents of the RSS mapping table 5642 * @adapter: the adapter 5643 * @map: holds the contents of the RSS mapping table 5644 * 5645 * Reads the contents of the RSS hash->queue mapping table. 5646 */ 5647 int t4_read_rss(struct adapter *adapter, u16 *map) 5648 { 5649 u32 val; 5650 int i, ret; 5651 int rss_nentries = adapter->chip_params->rss_nentries; 5652 5653 for (i = 0; i < rss_nentries / 2; ++i) { 5654 ret = rd_rss_row(adapter, i, &val); 5655 if (ret) 5656 return ret; 5657 *map++ = G_LKPTBLQUEUE0(val); 5658 *map++ = G_LKPTBLQUEUE1(val); 5659 } 5660 return 0; 5661 } 5662 5663 /** 5664 * t4_tp_fw_ldst_rw - Access TP indirect register through LDST 5665 * @adap: the adapter 5666 * @cmd: TP fw ldst address space type 5667 * @vals: where the indirect register values are stored/written 5668 * @nregs: how many indirect registers to read/write 5669 * @start_idx: index of first indirect register to read/write 5670 * @rw: Read (1) or Write (0) 5671 * @sleep_ok: if true we may sleep while awaiting command completion 5672 * 5673 * Access TP indirect registers through LDST 5674 **/ 5675 static int t4_tp_fw_ldst_rw(struct adapter *adap, int cmd, u32 *vals, 5676 unsigned int nregs, unsigned int start_index, 5677 unsigned int rw, bool sleep_ok) 5678 { 5679 int ret = 0; 5680 unsigned int i; 5681 struct fw_ldst_cmd c; 5682 5683 for (i = 0; i < nregs; i++) { 5684 memset(&c, 0, sizeof(c)); 5685 c.op_to_addrspace = cpu_to_be32(V_FW_CMD_OP(FW_LDST_CMD) | 5686 F_FW_CMD_REQUEST | 5687 (rw ? F_FW_CMD_READ : 5688 F_FW_CMD_WRITE) | 5689 V_FW_LDST_CMD_ADDRSPACE(cmd)); 5690 c.cycles_to_len16 = cpu_to_be32(FW_LEN16(c)); 5691 5692 c.u.addrval.addr = cpu_to_be32(start_index + i); 5693 c.u.addrval.val = rw ? 0 : cpu_to_be32(vals[i]); 5694 ret = t4_wr_mbox_meat(adap, adap->mbox, &c, sizeof(c), &c, 5695 sleep_ok); 5696 if (ret) 5697 return ret; 5698 5699 if (rw) 5700 vals[i] = be32_to_cpu(c.u.addrval.val); 5701 } 5702 return 0; 5703 } 5704 5705 /** 5706 * t4_tp_indirect_rw - Read/Write TP indirect register through LDST or backdoor 5707 * @adap: the adapter 5708 * @reg_addr: Address Register 5709 * @reg_data: Data register 5710 * @buff: where the indirect register values are stored/written 5711 * @nregs: how many indirect registers to read/write 5712 * @start_index: index of first indirect register to read/write 5713 * @rw: READ(1) or WRITE(0) 5714 * @sleep_ok: if true we may sleep while awaiting command completion 5715 * 5716 * Read/Write TP indirect registers through LDST if possible. 5717 * Else, use backdoor access 5718 **/ 5719 static void t4_tp_indirect_rw(struct adapter *adap, u32 reg_addr, u32 reg_data, 5720 u32 *buff, u32 nregs, u32 start_index, int rw, 5721 bool sleep_ok) 5722 { 5723 int rc = -EINVAL; 5724 int cmd; 5725 5726 switch (reg_addr) { 5727 case A_TP_PIO_ADDR: 5728 cmd = FW_LDST_ADDRSPC_TP_PIO; 5729 break; 5730 case A_TP_TM_PIO_ADDR: 5731 cmd = FW_LDST_ADDRSPC_TP_TM_PIO; 5732 break; 5733 case A_TP_MIB_INDEX: 5734 cmd = FW_LDST_ADDRSPC_TP_MIB; 5735 break; 5736 default: 5737 goto indirect_access; 5738 } 5739 5740 if (t4_use_ldst(adap)) 5741 rc = t4_tp_fw_ldst_rw(adap, cmd, buff, nregs, start_index, rw, 5742 sleep_ok); 5743 5744 indirect_access: 5745 5746 if (rc) { 5747 if (rw) 5748 t4_read_indirect(adap, reg_addr, reg_data, buff, nregs, 5749 start_index); 5750 else 5751 t4_write_indirect(adap, reg_addr, reg_data, buff, nregs, 5752 start_index); 5753 } 5754 } 5755 5756 /** 5757 * t4_tp_pio_read - Read TP PIO registers 5758 * @adap: the adapter 5759 * @buff: where the indirect register values are written 5760 * @nregs: how many indirect registers to read 5761 * @start_index: index of first indirect register to read 5762 * @sleep_ok: if true we may sleep while awaiting command completion 5763 * 5764 * Read TP PIO Registers 5765 **/ 5766 void t4_tp_pio_read(struct adapter *adap, u32 *buff, u32 nregs, 5767 u32 start_index, bool sleep_ok) 5768 { 5769 t4_tp_indirect_rw(adap, A_TP_PIO_ADDR, A_TP_PIO_DATA, buff, nregs, 5770 start_index, 1, sleep_ok); 5771 } 5772 5773 /** 5774 * t4_tp_pio_write - Write TP PIO registers 5775 * @adap: the adapter 5776 * @buff: where the indirect register values are stored 5777 * @nregs: how many indirect registers to write 5778 * @start_index: index of first indirect register to write 5779 * @sleep_ok: if true we may sleep while awaiting command completion 5780 * 5781 * Write TP PIO Registers 5782 **/ 5783 void t4_tp_pio_write(struct adapter *adap, const u32 *buff, u32 nregs, 5784 u32 start_index, bool sleep_ok) 5785 { 5786 t4_tp_indirect_rw(adap, A_TP_PIO_ADDR, A_TP_PIO_DATA, 5787 __DECONST(u32 *, buff), nregs, start_index, 0, sleep_ok); 5788 } 5789 5790 /** 5791 * t4_tp_tm_pio_read - Read TP TM PIO registers 5792 * @adap: the adapter 5793 * @buff: where the indirect register values are written 5794 * @nregs: how many indirect registers to read 5795 * @start_index: index of first indirect register to read 5796 * @sleep_ok: if true we may sleep while awaiting command completion 5797 * 5798 * Read TP TM PIO Registers 5799 **/ 5800 void t4_tp_tm_pio_read(struct adapter *adap, u32 *buff, u32 nregs, 5801 u32 start_index, bool sleep_ok) 5802 { 5803 t4_tp_indirect_rw(adap, A_TP_TM_PIO_ADDR, A_TP_TM_PIO_DATA, buff, 5804 nregs, start_index, 1, sleep_ok); 5805 } 5806 5807 /** 5808 * t4_tp_mib_read - Read TP MIB registers 5809 * @adap: the adapter 5810 * @buff: where the indirect register values are written 5811 * @nregs: how many indirect registers to read 5812 * @start_index: index of first indirect register to read 5813 * @sleep_ok: if true we may sleep while awaiting command completion 5814 * 5815 * Read TP MIB Registers 5816 **/ 5817 void t4_tp_mib_read(struct adapter *adap, u32 *buff, u32 nregs, u32 start_index, 5818 bool sleep_ok) 5819 { 5820 t4_tp_indirect_rw(adap, A_TP_MIB_INDEX, A_TP_MIB_DATA, buff, nregs, 5821 start_index, 1, sleep_ok); 5822 } 5823 5824 /** 5825 * t4_read_rss_key - read the global RSS key 5826 * @adap: the adapter 5827 * @key: 10-entry array holding the 320-bit RSS key 5828 * @sleep_ok: if true we may sleep while awaiting command completion 5829 * 5830 * Reads the global 320-bit RSS key. 5831 */ 5832 void t4_read_rss_key(struct adapter *adap, u32 *key, bool sleep_ok) 5833 { 5834 t4_tp_pio_read(adap, key, 10, A_TP_RSS_SECRET_KEY0, sleep_ok); 5835 } 5836 5837 /** 5838 * t4_write_rss_key - program one of the RSS keys 5839 * @adap: the adapter 5840 * @key: 10-entry array holding the 320-bit RSS key 5841 * @idx: which RSS key to write 5842 * @sleep_ok: if true we may sleep while awaiting command completion 5843 * 5844 * Writes one of the RSS keys with the given 320-bit value. If @idx is 5845 * 0..15 the corresponding entry in the RSS key table is written, 5846 * otherwise the global RSS key is written. 5847 */ 5848 void t4_write_rss_key(struct adapter *adap, const u32 *key, int idx, 5849 bool sleep_ok) 5850 { 5851 u8 rss_key_addr_cnt = 16; 5852 u32 vrt = t4_read_reg(adap, A_TP_RSS_CONFIG_VRT); 5853 5854 /* 5855 * T6 and later: for KeyMode 3 (per-vf and per-vf scramble), 5856 * allows access to key addresses 16-63 by using KeyWrAddrX 5857 * as index[5:4](upper 2) into key table 5858 */ 5859 if ((chip_id(adap) > CHELSIO_T5) && 5860 (vrt & F_KEYEXTEND) && (G_KEYMODE(vrt) == 3)) 5861 rss_key_addr_cnt = 32; 5862 5863 t4_tp_pio_write(adap, key, 10, A_TP_RSS_SECRET_KEY0, sleep_ok); 5864 5865 if (idx >= 0 && idx < rss_key_addr_cnt) { 5866 if (rss_key_addr_cnt > 16) 5867 t4_write_reg(adap, A_TP_RSS_CONFIG_VRT, 5868 vrt | V_KEYWRADDRX(idx >> 4) | 5869 V_T6_VFWRADDR(idx) | F_KEYWREN); 5870 else 5871 t4_write_reg(adap, A_TP_RSS_CONFIG_VRT, 5872 vrt| V_KEYWRADDR(idx) | F_KEYWREN); 5873 } 5874 } 5875 5876 /** 5877 * t4_read_rss_pf_config - read PF RSS Configuration Table 5878 * @adapter: the adapter 5879 * @index: the entry in the PF RSS table to read 5880 * @valp: where to store the returned value 5881 * @sleep_ok: if true we may sleep while awaiting command completion 5882 * 5883 * Reads the PF RSS Configuration Table at the specified index and returns 5884 * the value found there. 5885 */ 5886 void t4_read_rss_pf_config(struct adapter *adapter, unsigned int index, 5887 u32 *valp, bool sleep_ok) 5888 { 5889 t4_tp_pio_read(adapter, valp, 1, A_TP_RSS_PF0_CONFIG + index, sleep_ok); 5890 } 5891 5892 /** 5893 * t4_write_rss_pf_config - write PF RSS Configuration Table 5894 * @adapter: the adapter 5895 * @index: the entry in the VF RSS table to read 5896 * @val: the value to store 5897 * @sleep_ok: if true we may sleep while awaiting command completion 5898 * 5899 * Writes the PF RSS Configuration Table at the specified index with the 5900 * specified value. 5901 */ 5902 void t4_write_rss_pf_config(struct adapter *adapter, unsigned int index, 5903 u32 val, bool sleep_ok) 5904 { 5905 t4_tp_pio_write(adapter, &val, 1, A_TP_RSS_PF0_CONFIG + index, 5906 sleep_ok); 5907 } 5908 5909 /** 5910 * t4_read_rss_vf_config - read VF RSS Configuration Table 5911 * @adapter: the adapter 5912 * @index: the entry in the VF RSS table to read 5913 * @vfl: where to store the returned VFL 5914 * @vfh: where to store the returned VFH 5915 * @sleep_ok: if true we may sleep while awaiting command completion 5916 * 5917 * Reads the VF RSS Configuration Table at the specified index and returns 5918 * the (VFL, VFH) values found there. 5919 */ 5920 void t4_read_rss_vf_config(struct adapter *adapter, unsigned int index, 5921 u32 *vfl, u32 *vfh, bool sleep_ok) 5922 { 5923 u32 vrt, mask, data; 5924 5925 if (chip_id(adapter) <= CHELSIO_T5) { 5926 mask = V_VFWRADDR(M_VFWRADDR); 5927 data = V_VFWRADDR(index); 5928 } else { 5929 mask = V_T6_VFWRADDR(M_T6_VFWRADDR); 5930 data = V_T6_VFWRADDR(index); 5931 } 5932 /* 5933 * Request that the index'th VF Table values be read into VFL/VFH. 5934 */ 5935 vrt = t4_read_reg(adapter, A_TP_RSS_CONFIG_VRT); 5936 vrt &= ~(F_VFRDRG | F_VFWREN | F_KEYWREN | mask); 5937 vrt |= data | F_VFRDEN; 5938 t4_write_reg(adapter, A_TP_RSS_CONFIG_VRT, vrt); 5939 5940 /* 5941 * Grab the VFL/VFH values ... 5942 */ 5943 t4_tp_pio_read(adapter, vfl, 1, A_TP_RSS_VFL_CONFIG, sleep_ok); 5944 t4_tp_pio_read(adapter, vfh, 1, A_TP_RSS_VFH_CONFIG, sleep_ok); 5945 } 5946 5947 /** 5948 * t4_write_rss_vf_config - write VF RSS Configuration Table 5949 * 5950 * @adapter: the adapter 5951 * @index: the entry in the VF RSS table to write 5952 * @vfl: the VFL to store 5953 * @vfh: the VFH to store 5954 * 5955 * Writes the VF RSS Configuration Table at the specified index with the 5956 * specified (VFL, VFH) values. 5957 */ 5958 void t4_write_rss_vf_config(struct adapter *adapter, unsigned int index, 5959 u32 vfl, u32 vfh, bool sleep_ok) 5960 { 5961 u32 vrt, mask, data; 5962 5963 if (chip_id(adapter) <= CHELSIO_T5) { 5964 mask = V_VFWRADDR(M_VFWRADDR); 5965 data = V_VFWRADDR(index); 5966 } else { 5967 mask = V_T6_VFWRADDR(M_T6_VFWRADDR); 5968 data = V_T6_VFWRADDR(index); 5969 } 5970 5971 /* 5972 * Load up VFL/VFH with the values to be written ... 5973 */ 5974 t4_tp_pio_write(adapter, &vfl, 1, A_TP_RSS_VFL_CONFIG, sleep_ok); 5975 t4_tp_pio_write(adapter, &vfh, 1, A_TP_RSS_VFH_CONFIG, sleep_ok); 5976 5977 /* 5978 * Write the VFL/VFH into the VF Table at index'th location. 5979 */ 5980 vrt = t4_read_reg(adapter, A_TP_RSS_CONFIG_VRT); 5981 vrt &= ~(F_VFRDRG | F_VFWREN | F_KEYWREN | mask); 5982 vrt |= data | F_VFRDEN; 5983 t4_write_reg(adapter, A_TP_RSS_CONFIG_VRT, vrt); 5984 } 5985 5986 /** 5987 * t4_read_rss_pf_map - read PF RSS Map 5988 * @adapter: the adapter 5989 * @sleep_ok: if true we may sleep while awaiting command completion 5990 * 5991 * Reads the PF RSS Map register and returns its value. 5992 */ 5993 u32 t4_read_rss_pf_map(struct adapter *adapter, bool sleep_ok) 5994 { 5995 u32 pfmap; 5996 5997 t4_tp_pio_read(adapter, &pfmap, 1, A_TP_RSS_PF_MAP, sleep_ok); 5998 5999 return pfmap; 6000 } 6001 6002 /** 6003 * t4_write_rss_pf_map - write PF RSS Map 6004 * @adapter: the adapter 6005 * @pfmap: PF RSS Map value 6006 * 6007 * Writes the specified value to the PF RSS Map register. 6008 */ 6009 void t4_write_rss_pf_map(struct adapter *adapter, u32 pfmap, bool sleep_ok) 6010 { 6011 t4_tp_pio_write(adapter, &pfmap, 1, A_TP_RSS_PF_MAP, sleep_ok); 6012 } 6013 6014 /** 6015 * t4_read_rss_pf_mask - read PF RSS Mask 6016 * @adapter: the adapter 6017 * @sleep_ok: if true we may sleep while awaiting command completion 6018 * 6019 * Reads the PF RSS Mask register and returns its value. 6020 */ 6021 u32 t4_read_rss_pf_mask(struct adapter *adapter, bool sleep_ok) 6022 { 6023 u32 pfmask; 6024 6025 t4_tp_pio_read(adapter, &pfmask, 1, A_TP_RSS_PF_MSK, sleep_ok); 6026 6027 return pfmask; 6028 } 6029 6030 /** 6031 * t4_write_rss_pf_mask - write PF RSS Mask 6032 * @adapter: the adapter 6033 * @pfmask: PF RSS Mask value 6034 * 6035 * Writes the specified value to the PF RSS Mask register. 6036 */ 6037 void t4_write_rss_pf_mask(struct adapter *adapter, u32 pfmask, bool sleep_ok) 6038 { 6039 t4_tp_pio_write(adapter, &pfmask, 1, A_TP_RSS_PF_MSK, sleep_ok); 6040 } 6041 6042 /** 6043 * t4_tp_get_tcp_stats - read TP's TCP MIB counters 6044 * @adap: the adapter 6045 * @v4: holds the TCP/IP counter values 6046 * @v6: holds the TCP/IPv6 counter values 6047 * @sleep_ok: if true we may sleep while awaiting command completion 6048 * 6049 * Returns the values of TP's TCP/IP and TCP/IPv6 MIB counters. 6050 * Either @v4 or @v6 may be %NULL to skip the corresponding stats. 6051 */ 6052 void t4_tp_get_tcp_stats(struct adapter *adap, struct tp_tcp_stats *v4, 6053 struct tp_tcp_stats *v6, bool sleep_ok) 6054 { 6055 u32 val[A_TP_MIB_TCP_RXT_SEG_LO - A_TP_MIB_TCP_OUT_RST + 1]; 6056 6057 #define STAT_IDX(x) ((A_TP_MIB_TCP_##x) - A_TP_MIB_TCP_OUT_RST) 6058 #define STAT(x) val[STAT_IDX(x)] 6059 #define STAT64(x) (((u64)STAT(x##_HI) << 32) | STAT(x##_LO)) 6060 6061 if (v4) { 6062 t4_tp_mib_read(adap, val, ARRAY_SIZE(val), 6063 A_TP_MIB_TCP_OUT_RST, sleep_ok); 6064 v4->tcp_out_rsts = STAT(OUT_RST); 6065 v4->tcp_in_segs = STAT64(IN_SEG); 6066 v4->tcp_out_segs = STAT64(OUT_SEG); 6067 v4->tcp_retrans_segs = STAT64(RXT_SEG); 6068 } 6069 if (v6) { 6070 t4_tp_mib_read(adap, val, ARRAY_SIZE(val), 6071 A_TP_MIB_TCP_V6OUT_RST, sleep_ok); 6072 v6->tcp_out_rsts = STAT(OUT_RST); 6073 v6->tcp_in_segs = STAT64(IN_SEG); 6074 v6->tcp_out_segs = STAT64(OUT_SEG); 6075 v6->tcp_retrans_segs = STAT64(RXT_SEG); 6076 } 6077 #undef STAT64 6078 #undef STAT 6079 #undef STAT_IDX 6080 } 6081 6082 /** 6083 * t4_tp_get_err_stats - read TP's error MIB counters 6084 * @adap: the adapter 6085 * @st: holds the counter values 6086 * @sleep_ok: if true we may sleep while awaiting command completion 6087 * 6088 * Returns the values of TP's error counters. 6089 */ 6090 void t4_tp_get_err_stats(struct adapter *adap, struct tp_err_stats *st, 6091 bool sleep_ok) 6092 { 6093 int nchan = adap->chip_params->nchan; 6094 6095 t4_tp_mib_read(adap, st->mac_in_errs, nchan, A_TP_MIB_MAC_IN_ERR_0, 6096 sleep_ok); 6097 6098 t4_tp_mib_read(adap, st->hdr_in_errs, nchan, A_TP_MIB_HDR_IN_ERR_0, 6099 sleep_ok); 6100 6101 t4_tp_mib_read(adap, st->tcp_in_errs, nchan, A_TP_MIB_TCP_IN_ERR_0, 6102 sleep_ok); 6103 6104 t4_tp_mib_read(adap, st->tnl_cong_drops, nchan, 6105 A_TP_MIB_TNL_CNG_DROP_0, sleep_ok); 6106 6107 t4_tp_mib_read(adap, st->ofld_chan_drops, nchan, 6108 A_TP_MIB_OFD_CHN_DROP_0, sleep_ok); 6109 6110 t4_tp_mib_read(adap, st->tnl_tx_drops, nchan, A_TP_MIB_TNL_DROP_0, 6111 sleep_ok); 6112 6113 t4_tp_mib_read(adap, st->ofld_vlan_drops, nchan, 6114 A_TP_MIB_OFD_VLN_DROP_0, sleep_ok); 6115 6116 t4_tp_mib_read(adap, st->tcp6_in_errs, nchan, 6117 A_TP_MIB_TCP_V6IN_ERR_0, sleep_ok); 6118 6119 t4_tp_mib_read(adap, &st->ofld_no_neigh, 2, A_TP_MIB_OFD_ARP_DROP, 6120 sleep_ok); 6121 } 6122 6123 /** 6124 * t4_tp_get_err_stats - read TP's error MIB counters 6125 * @adap: the adapter 6126 * @st: holds the counter values 6127 * @sleep_ok: if true we may sleep while awaiting command completion 6128 * 6129 * Returns the values of TP's error counters. 6130 */ 6131 void t4_tp_get_tnl_stats(struct adapter *adap, struct tp_tnl_stats *st, 6132 bool sleep_ok) 6133 { 6134 int nchan = adap->chip_params->nchan; 6135 6136 t4_tp_mib_read(adap, st->out_pkt, nchan, A_TP_MIB_TNL_OUT_PKT_0, 6137 sleep_ok); 6138 t4_tp_mib_read(adap, st->in_pkt, nchan, A_TP_MIB_TNL_IN_PKT_0, 6139 sleep_ok); 6140 } 6141 6142 /** 6143 * t4_tp_get_proxy_stats - read TP's proxy MIB counters 6144 * @adap: the adapter 6145 * @st: holds the counter values 6146 * 6147 * Returns the values of TP's proxy counters. 6148 */ 6149 void t4_tp_get_proxy_stats(struct adapter *adap, struct tp_proxy_stats *st, 6150 bool sleep_ok) 6151 { 6152 int nchan = adap->chip_params->nchan; 6153 6154 t4_tp_mib_read(adap, st->proxy, nchan, A_TP_MIB_TNL_LPBK_0, sleep_ok); 6155 } 6156 6157 /** 6158 * t4_tp_get_cpl_stats - read TP's CPL MIB counters 6159 * @adap: the adapter 6160 * @st: holds the counter values 6161 * @sleep_ok: if true we may sleep while awaiting command completion 6162 * 6163 * Returns the values of TP's CPL counters. 6164 */ 6165 void t4_tp_get_cpl_stats(struct adapter *adap, struct tp_cpl_stats *st, 6166 bool sleep_ok) 6167 { 6168 int nchan = adap->chip_params->nchan; 6169 6170 t4_tp_mib_read(adap, st->req, nchan, A_TP_MIB_CPL_IN_REQ_0, sleep_ok); 6171 6172 t4_tp_mib_read(adap, st->rsp, nchan, A_TP_MIB_CPL_OUT_RSP_0, sleep_ok); 6173 } 6174 6175 /** 6176 * t4_tp_get_rdma_stats - read TP's RDMA MIB counters 6177 * @adap: the adapter 6178 * @st: holds the counter values 6179 * 6180 * Returns the values of TP's RDMA counters. 6181 */ 6182 void t4_tp_get_rdma_stats(struct adapter *adap, struct tp_rdma_stats *st, 6183 bool sleep_ok) 6184 { 6185 t4_tp_mib_read(adap, &st->rqe_dfr_pkt, 2, A_TP_MIB_RQE_DFR_PKT, 6186 sleep_ok); 6187 } 6188 6189 /** 6190 * t4_get_fcoe_stats - read TP's FCoE MIB counters for a port 6191 * @adap: the adapter 6192 * @idx: the port index 6193 * @st: holds the counter values 6194 * @sleep_ok: if true we may sleep while awaiting command completion 6195 * 6196 * Returns the values of TP's FCoE counters for the selected port. 6197 */ 6198 void t4_get_fcoe_stats(struct adapter *adap, unsigned int idx, 6199 struct tp_fcoe_stats *st, bool sleep_ok) 6200 { 6201 u32 val[2]; 6202 6203 t4_tp_mib_read(adap, &st->frames_ddp, 1, A_TP_MIB_FCOE_DDP_0 + idx, 6204 sleep_ok); 6205 6206 t4_tp_mib_read(adap, &st->frames_drop, 1, 6207 A_TP_MIB_FCOE_DROP_0 + idx, sleep_ok); 6208 6209 t4_tp_mib_read(adap, val, 2, A_TP_MIB_FCOE_BYTE_0_HI + 2 * idx, 6210 sleep_ok); 6211 6212 st->octets_ddp = ((u64)val[0] << 32) | val[1]; 6213 } 6214 6215 /** 6216 * t4_get_usm_stats - read TP's non-TCP DDP MIB counters 6217 * @adap: the adapter 6218 * @st: holds the counter values 6219 * @sleep_ok: if true we may sleep while awaiting command completion 6220 * 6221 * Returns the values of TP's counters for non-TCP directly-placed packets. 6222 */ 6223 void t4_get_usm_stats(struct adapter *adap, struct tp_usm_stats *st, 6224 bool sleep_ok) 6225 { 6226 u32 val[4]; 6227 6228 t4_tp_mib_read(adap, val, 4, A_TP_MIB_USM_PKTS, sleep_ok); 6229 6230 st->frames = val[0]; 6231 st->drops = val[1]; 6232 st->octets = ((u64)val[2] << 32) | val[3]; 6233 } 6234 6235 /** 6236 * t4_tp_get_tid_stats - read TP's tid MIB counters. 6237 * @adap: the adapter 6238 * @st: holds the counter values 6239 * @sleep_ok: if true we may sleep while awaiting command completion 6240 * 6241 * Returns the values of TP's counters for tids. 6242 */ 6243 void t4_tp_get_tid_stats(struct adapter *adap, struct tp_tid_stats *st, 6244 bool sleep_ok) 6245 { 6246 6247 t4_tp_mib_read(adap, &st->del, 4, A_TP_MIB_TID_DEL, sleep_ok); 6248 } 6249 6250 /** 6251 * t4_read_mtu_tbl - returns the values in the HW path MTU table 6252 * @adap: the adapter 6253 * @mtus: where to store the MTU values 6254 * @mtu_log: where to store the MTU base-2 log (may be %NULL) 6255 * 6256 * Reads the HW path MTU table. 6257 */ 6258 void t4_read_mtu_tbl(struct adapter *adap, u16 *mtus, u8 *mtu_log) 6259 { 6260 u32 v; 6261 int i; 6262 6263 for (i = 0; i < NMTUS; ++i) { 6264 t4_write_reg(adap, A_TP_MTU_TABLE, 6265 V_MTUINDEX(0xff) | V_MTUVALUE(i)); 6266 v = t4_read_reg(adap, A_TP_MTU_TABLE); 6267 mtus[i] = G_MTUVALUE(v); 6268 if (mtu_log) 6269 mtu_log[i] = G_MTUWIDTH(v); 6270 } 6271 } 6272 6273 /** 6274 * t4_read_cong_tbl - reads the congestion control table 6275 * @adap: the adapter 6276 * @incr: where to store the alpha values 6277 * 6278 * Reads the additive increments programmed into the HW congestion 6279 * control table. 6280 */ 6281 void t4_read_cong_tbl(struct adapter *adap, u16 incr[NMTUS][NCCTRL_WIN]) 6282 { 6283 unsigned int mtu, w; 6284 6285 for (mtu = 0; mtu < NMTUS; ++mtu) 6286 for (w = 0; w < NCCTRL_WIN; ++w) { 6287 t4_write_reg(adap, A_TP_CCTRL_TABLE, 6288 V_ROWINDEX(0xffff) | (mtu << 5) | w); 6289 incr[mtu][w] = (u16)t4_read_reg(adap, 6290 A_TP_CCTRL_TABLE) & 0x1fff; 6291 } 6292 } 6293 6294 /** 6295 * t4_tp_wr_bits_indirect - set/clear bits in an indirect TP register 6296 * @adap: the adapter 6297 * @addr: the indirect TP register address 6298 * @mask: specifies the field within the register to modify 6299 * @val: new value for the field 6300 * 6301 * Sets a field of an indirect TP register to the given value. 6302 */ 6303 void t4_tp_wr_bits_indirect(struct adapter *adap, unsigned int addr, 6304 unsigned int mask, unsigned int val) 6305 { 6306 t4_write_reg(adap, A_TP_PIO_ADDR, addr); 6307 val |= t4_read_reg(adap, A_TP_PIO_DATA) & ~mask; 6308 t4_write_reg(adap, A_TP_PIO_DATA, val); 6309 } 6310 6311 /** 6312 * init_cong_ctrl - initialize congestion control parameters 6313 * @a: the alpha values for congestion control 6314 * @b: the beta values for congestion control 6315 * 6316 * Initialize the congestion control parameters. 6317 */ 6318 static void init_cong_ctrl(unsigned short *a, unsigned short *b) 6319 { 6320 a[0] = a[1] = a[2] = a[3] = a[4] = a[5] = a[6] = a[7] = a[8] = 1; 6321 a[9] = 2; 6322 a[10] = 3; 6323 a[11] = 4; 6324 a[12] = 5; 6325 a[13] = 6; 6326 a[14] = 7; 6327 a[15] = 8; 6328 a[16] = 9; 6329 a[17] = 10; 6330 a[18] = 14; 6331 a[19] = 17; 6332 a[20] = 21; 6333 a[21] = 25; 6334 a[22] = 30; 6335 a[23] = 35; 6336 a[24] = 45; 6337 a[25] = 60; 6338 a[26] = 80; 6339 a[27] = 100; 6340 a[28] = 200; 6341 a[29] = 300; 6342 a[30] = 400; 6343 a[31] = 500; 6344 6345 b[0] = b[1] = b[2] = b[3] = b[4] = b[5] = b[6] = b[7] = b[8] = 0; 6346 b[9] = b[10] = 1; 6347 b[11] = b[12] = 2; 6348 b[13] = b[14] = b[15] = b[16] = 3; 6349 b[17] = b[18] = b[19] = b[20] = b[21] = 4; 6350 b[22] = b[23] = b[24] = b[25] = b[26] = b[27] = 5; 6351 b[28] = b[29] = 6; 6352 b[30] = b[31] = 7; 6353 } 6354 6355 /* The minimum additive increment value for the congestion control table */ 6356 #define CC_MIN_INCR 2U 6357 6358 /** 6359 * t4_load_mtus - write the MTU and congestion control HW tables 6360 * @adap: the adapter 6361 * @mtus: the values for the MTU table 6362 * @alpha: the values for the congestion control alpha parameter 6363 * @beta: the values for the congestion control beta parameter 6364 * 6365 * Write the HW MTU table with the supplied MTUs and the high-speed 6366 * congestion control table with the supplied alpha, beta, and MTUs. 6367 * We write the two tables together because the additive increments 6368 * depend on the MTUs. 6369 */ 6370 void t4_load_mtus(struct adapter *adap, const unsigned short *mtus, 6371 const unsigned short *alpha, const unsigned short *beta) 6372 { 6373 static const unsigned int avg_pkts[NCCTRL_WIN] = { 6374 2, 6, 10, 14, 20, 28, 40, 56, 80, 112, 160, 224, 320, 448, 640, 6375 896, 1281, 1792, 2560, 3584, 5120, 7168, 10240, 14336, 20480, 6376 28672, 40960, 57344, 81920, 114688, 163840, 229376 6377 }; 6378 6379 unsigned int i, w; 6380 6381 for (i = 0; i < NMTUS; ++i) { 6382 unsigned int mtu = mtus[i]; 6383 unsigned int log2 = fls(mtu); 6384 6385 if (!(mtu & ((1 << log2) >> 2))) /* round */ 6386 log2--; 6387 t4_write_reg(adap, A_TP_MTU_TABLE, V_MTUINDEX(i) | 6388 V_MTUWIDTH(log2) | V_MTUVALUE(mtu)); 6389 6390 for (w = 0; w < NCCTRL_WIN; ++w) { 6391 unsigned int inc; 6392 6393 inc = max(((mtu - 40) * alpha[w]) / avg_pkts[w], 6394 CC_MIN_INCR); 6395 6396 t4_write_reg(adap, A_TP_CCTRL_TABLE, (i << 21) | 6397 (w << 16) | (beta[w] << 13) | inc); 6398 } 6399 } 6400 } 6401 6402 /** 6403 * t4_set_pace_tbl - set the pace table 6404 * @adap: the adapter 6405 * @pace_vals: the pace values in microseconds 6406 * @start: index of the first entry in the HW pace table to set 6407 * @n: how many entries to set 6408 * 6409 * Sets (a subset of the) HW pace table. 6410 */ 6411 int t4_set_pace_tbl(struct adapter *adap, const unsigned int *pace_vals, 6412 unsigned int start, unsigned int n) 6413 { 6414 unsigned int vals[NTX_SCHED], i; 6415 unsigned int tick_ns = dack_ticks_to_usec(adap, 1000); 6416 6417 if (n > NTX_SCHED) 6418 return -ERANGE; 6419 6420 /* convert values from us to dack ticks, rounding to closest value */ 6421 for (i = 0; i < n; i++, pace_vals++) { 6422 vals[i] = (1000 * *pace_vals + tick_ns / 2) / tick_ns; 6423 if (vals[i] > 0x7ff) 6424 return -ERANGE; 6425 if (*pace_vals && vals[i] == 0) 6426 return -ERANGE; 6427 } 6428 for (i = 0; i < n; i++, start++) 6429 t4_write_reg(adap, A_TP_PACE_TABLE, (start << 16) | vals[i]); 6430 return 0; 6431 } 6432 6433 /** 6434 * t4_set_sched_bps - set the bit rate for a HW traffic scheduler 6435 * @adap: the adapter 6436 * @kbps: target rate in Kbps 6437 * @sched: the scheduler index 6438 * 6439 * Configure a Tx HW scheduler for the target rate. 6440 */ 6441 int t4_set_sched_bps(struct adapter *adap, int sched, unsigned int kbps) 6442 { 6443 unsigned int v, tps, cpt, bpt, delta, mindelta = ~0; 6444 unsigned int clk = adap->params.vpd.cclk * 1000; 6445 unsigned int selected_cpt = 0, selected_bpt = 0; 6446 6447 if (kbps > 0) { 6448 kbps *= 125; /* -> bytes */ 6449 for (cpt = 1; cpt <= 255; cpt++) { 6450 tps = clk / cpt; 6451 bpt = (kbps + tps / 2) / tps; 6452 if (bpt > 0 && bpt <= 255) { 6453 v = bpt * tps; 6454 delta = v >= kbps ? v - kbps : kbps - v; 6455 if (delta < mindelta) { 6456 mindelta = delta; 6457 selected_cpt = cpt; 6458 selected_bpt = bpt; 6459 } 6460 } else if (selected_cpt) 6461 break; 6462 } 6463 if (!selected_cpt) 6464 return -EINVAL; 6465 } 6466 t4_write_reg(adap, A_TP_TM_PIO_ADDR, 6467 A_TP_TX_MOD_Q1_Q0_RATE_LIMIT - sched / 2); 6468 v = t4_read_reg(adap, A_TP_TM_PIO_DATA); 6469 if (sched & 1) 6470 v = (v & 0xffff) | (selected_cpt << 16) | (selected_bpt << 24); 6471 else 6472 v = (v & 0xffff0000) | selected_cpt | (selected_bpt << 8); 6473 t4_write_reg(adap, A_TP_TM_PIO_DATA, v); 6474 return 0; 6475 } 6476 6477 /** 6478 * t4_set_sched_ipg - set the IPG for a Tx HW packet rate scheduler 6479 * @adap: the adapter 6480 * @sched: the scheduler index 6481 * @ipg: the interpacket delay in tenths of nanoseconds 6482 * 6483 * Set the interpacket delay for a HW packet rate scheduler. 6484 */ 6485 int t4_set_sched_ipg(struct adapter *adap, int sched, unsigned int ipg) 6486 { 6487 unsigned int v, addr = A_TP_TX_MOD_Q1_Q0_TIMER_SEPARATOR - sched / 2; 6488 6489 /* convert ipg to nearest number of core clocks */ 6490 ipg *= core_ticks_per_usec(adap); 6491 ipg = (ipg + 5000) / 10000; 6492 if (ipg > M_TXTIMERSEPQ0) 6493 return -EINVAL; 6494 6495 t4_write_reg(adap, A_TP_TM_PIO_ADDR, addr); 6496 v = t4_read_reg(adap, A_TP_TM_PIO_DATA); 6497 if (sched & 1) 6498 v = (v & V_TXTIMERSEPQ0(M_TXTIMERSEPQ0)) | V_TXTIMERSEPQ1(ipg); 6499 else 6500 v = (v & V_TXTIMERSEPQ1(M_TXTIMERSEPQ1)) | V_TXTIMERSEPQ0(ipg); 6501 t4_write_reg(adap, A_TP_TM_PIO_DATA, v); 6502 t4_read_reg(adap, A_TP_TM_PIO_DATA); 6503 return 0; 6504 } 6505 6506 /* 6507 * Calculates a rate in bytes/s given the number of 256-byte units per 4K core 6508 * clocks. The formula is 6509 * 6510 * bytes/s = bytes256 * 256 * ClkFreq / 4096 6511 * 6512 * which is equivalent to 6513 * 6514 * bytes/s = 62.5 * bytes256 * ClkFreq_ms 6515 */ 6516 static u64 chan_rate(struct adapter *adap, unsigned int bytes256) 6517 { 6518 u64 v = (u64)bytes256 * adap->params.vpd.cclk; 6519 6520 return v * 62 + v / 2; 6521 } 6522 6523 /** 6524 * t4_get_chan_txrate - get the current per channel Tx rates 6525 * @adap: the adapter 6526 * @nic_rate: rates for NIC traffic 6527 * @ofld_rate: rates for offloaded traffic 6528 * 6529 * Return the current Tx rates in bytes/s for NIC and offloaded traffic 6530 * for each channel. 6531 */ 6532 void t4_get_chan_txrate(struct adapter *adap, u64 *nic_rate, u64 *ofld_rate) 6533 { 6534 u32 v; 6535 6536 v = t4_read_reg(adap, A_TP_TX_TRATE); 6537 nic_rate[0] = chan_rate(adap, G_TNLRATE0(v)); 6538 nic_rate[1] = chan_rate(adap, G_TNLRATE1(v)); 6539 if (adap->chip_params->nchan > 2) { 6540 nic_rate[2] = chan_rate(adap, G_TNLRATE2(v)); 6541 nic_rate[3] = chan_rate(adap, G_TNLRATE3(v)); 6542 } 6543 6544 v = t4_read_reg(adap, A_TP_TX_ORATE); 6545 ofld_rate[0] = chan_rate(adap, G_OFDRATE0(v)); 6546 ofld_rate[1] = chan_rate(adap, G_OFDRATE1(v)); 6547 if (adap->chip_params->nchan > 2) { 6548 ofld_rate[2] = chan_rate(adap, G_OFDRATE2(v)); 6549 ofld_rate[3] = chan_rate(adap, G_OFDRATE3(v)); 6550 } 6551 } 6552 6553 /** 6554 * t4_set_trace_filter - configure one of the tracing filters 6555 * @adap: the adapter 6556 * @tp: the desired trace filter parameters 6557 * @idx: which filter to configure 6558 * @enable: whether to enable or disable the filter 6559 * 6560 * Configures one of the tracing filters available in HW. If @tp is %NULL 6561 * it indicates that the filter is already written in the register and it 6562 * just needs to be enabled or disabled. 6563 */ 6564 int t4_set_trace_filter(struct adapter *adap, const struct trace_params *tp, 6565 int idx, int enable) 6566 { 6567 int i, ofst = idx * 4; 6568 u32 data_reg, mask_reg, cfg; 6569 u32 en = is_t4(adap) ? F_TFEN : F_T5_TFEN; 6570 6571 if (idx < 0 || idx >= NTRACE) 6572 return -EINVAL; 6573 6574 if (tp == NULL || !enable) { 6575 t4_set_reg_field(adap, A_MPS_TRC_FILTER_MATCH_CTL_A + ofst, en, 6576 enable ? en : 0); 6577 return 0; 6578 } 6579 6580 /* 6581 * TODO - After T4 data book is updated, specify the exact 6582 * section below. 6583 * 6584 * See T4 data book - MPS section for a complete description 6585 * of the below if..else handling of A_MPS_TRC_CFG register 6586 * value. 6587 */ 6588 cfg = t4_read_reg(adap, A_MPS_TRC_CFG); 6589 if (cfg & F_TRCMULTIFILTER) { 6590 /* 6591 * If multiple tracers are enabled, then maximum 6592 * capture size is 2.5KB (FIFO size of a single channel) 6593 * minus 2 flits for CPL_TRACE_PKT header. 6594 */ 6595 if (tp->snap_len > ((10 * 1024 / 4) - (2 * 8))) 6596 return -EINVAL; 6597 } else { 6598 /* 6599 * If multiple tracers are disabled, to avoid deadlocks 6600 * maximum packet capture size of 9600 bytes is recommended. 6601 * Also in this mode, only trace0 can be enabled and running. 6602 */ 6603 if (tp->snap_len > 9600 || idx) 6604 return -EINVAL; 6605 } 6606 6607 if (tp->port > (is_t4(adap) ? 11 : 19) || tp->invert > 1 || 6608 tp->skip_len > M_TFLENGTH || tp->skip_ofst > M_TFOFFSET || 6609 tp->min_len > M_TFMINPKTSIZE) 6610 return -EINVAL; 6611 6612 /* stop the tracer we'll be changing */ 6613 t4_set_reg_field(adap, A_MPS_TRC_FILTER_MATCH_CTL_A + ofst, en, 0); 6614 6615 idx *= (A_MPS_TRC_FILTER1_MATCH - A_MPS_TRC_FILTER0_MATCH); 6616 data_reg = A_MPS_TRC_FILTER0_MATCH + idx; 6617 mask_reg = A_MPS_TRC_FILTER0_DONT_CARE + idx; 6618 6619 for (i = 0; i < TRACE_LEN / 4; i++, data_reg += 4, mask_reg += 4) { 6620 t4_write_reg(adap, data_reg, tp->data[i]); 6621 t4_write_reg(adap, mask_reg, ~tp->mask[i]); 6622 } 6623 t4_write_reg(adap, A_MPS_TRC_FILTER_MATCH_CTL_B + ofst, 6624 V_TFCAPTUREMAX(tp->snap_len) | 6625 V_TFMINPKTSIZE(tp->min_len)); 6626 t4_write_reg(adap, A_MPS_TRC_FILTER_MATCH_CTL_A + ofst, 6627 V_TFOFFSET(tp->skip_ofst) | V_TFLENGTH(tp->skip_len) | en | 6628 (is_t4(adap) ? 6629 V_TFPORT(tp->port) | V_TFINVERTMATCH(tp->invert) : 6630 V_T5_TFPORT(tp->port) | V_T5_TFINVERTMATCH(tp->invert))); 6631 6632 return 0; 6633 } 6634 6635 /** 6636 * t4_get_trace_filter - query one of the tracing filters 6637 * @adap: the adapter 6638 * @tp: the current trace filter parameters 6639 * @idx: which trace filter to query 6640 * @enabled: non-zero if the filter is enabled 6641 * 6642 * Returns the current settings of one of the HW tracing filters. 6643 */ 6644 void t4_get_trace_filter(struct adapter *adap, struct trace_params *tp, int idx, 6645 int *enabled) 6646 { 6647 u32 ctla, ctlb; 6648 int i, ofst = idx * 4; 6649 u32 data_reg, mask_reg; 6650 6651 ctla = t4_read_reg(adap, A_MPS_TRC_FILTER_MATCH_CTL_A + ofst); 6652 ctlb = t4_read_reg(adap, A_MPS_TRC_FILTER_MATCH_CTL_B + ofst); 6653 6654 if (is_t4(adap)) { 6655 *enabled = !!(ctla & F_TFEN); 6656 tp->port = G_TFPORT(ctla); 6657 tp->invert = !!(ctla & F_TFINVERTMATCH); 6658 } else { 6659 *enabled = !!(ctla & F_T5_TFEN); 6660 tp->port = G_T5_TFPORT(ctla); 6661 tp->invert = !!(ctla & F_T5_TFINVERTMATCH); 6662 } 6663 tp->snap_len = G_TFCAPTUREMAX(ctlb); 6664 tp->min_len = G_TFMINPKTSIZE(ctlb); 6665 tp->skip_ofst = G_TFOFFSET(ctla); 6666 tp->skip_len = G_TFLENGTH(ctla); 6667 6668 ofst = (A_MPS_TRC_FILTER1_MATCH - A_MPS_TRC_FILTER0_MATCH) * idx; 6669 data_reg = A_MPS_TRC_FILTER0_MATCH + ofst; 6670 mask_reg = A_MPS_TRC_FILTER0_DONT_CARE + ofst; 6671 6672 for (i = 0; i < TRACE_LEN / 4; i++, data_reg += 4, mask_reg += 4) { 6673 tp->mask[i] = ~t4_read_reg(adap, mask_reg); 6674 tp->data[i] = t4_read_reg(adap, data_reg) & tp->mask[i]; 6675 } 6676 } 6677 6678 /** 6679 * t4_pmtx_get_stats - returns the HW stats from PMTX 6680 * @adap: the adapter 6681 * @cnt: where to store the count statistics 6682 * @cycles: where to store the cycle statistics 6683 * 6684 * Returns performance statistics from PMTX. 6685 */ 6686 void t4_pmtx_get_stats(struct adapter *adap, u32 cnt[], u64 cycles[]) 6687 { 6688 int i; 6689 u32 data[2]; 6690 6691 for (i = 0; i < adap->chip_params->pm_stats_cnt; i++) { 6692 t4_write_reg(adap, A_PM_TX_STAT_CONFIG, i + 1); 6693 cnt[i] = t4_read_reg(adap, A_PM_TX_STAT_COUNT); 6694 if (is_t4(adap)) 6695 cycles[i] = t4_read_reg64(adap, A_PM_TX_STAT_LSB); 6696 else { 6697 t4_read_indirect(adap, A_PM_TX_DBG_CTRL, 6698 A_PM_TX_DBG_DATA, data, 2, 6699 A_PM_TX_DBG_STAT_MSB); 6700 cycles[i] = (((u64)data[0] << 32) | data[1]); 6701 } 6702 } 6703 } 6704 6705 /** 6706 * t4_pmrx_get_stats - returns the HW stats from PMRX 6707 * @adap: the adapter 6708 * @cnt: where to store the count statistics 6709 * @cycles: where to store the cycle statistics 6710 * 6711 * Returns performance statistics from PMRX. 6712 */ 6713 void t4_pmrx_get_stats(struct adapter *adap, u32 cnt[], u64 cycles[]) 6714 { 6715 int i; 6716 u32 data[2]; 6717 6718 for (i = 0; i < adap->chip_params->pm_stats_cnt; i++) { 6719 t4_write_reg(adap, A_PM_RX_STAT_CONFIG, i + 1); 6720 cnt[i] = t4_read_reg(adap, A_PM_RX_STAT_COUNT); 6721 if (is_t4(adap)) { 6722 cycles[i] = t4_read_reg64(adap, A_PM_RX_STAT_LSB); 6723 } else { 6724 t4_read_indirect(adap, A_PM_RX_DBG_CTRL, 6725 A_PM_RX_DBG_DATA, data, 2, 6726 A_PM_RX_DBG_STAT_MSB); 6727 cycles[i] = (((u64)data[0] << 32) | data[1]); 6728 } 6729 } 6730 } 6731 6732 /** 6733 * t4_get_mps_bg_map - return the buffer groups associated with a port 6734 * @adap: the adapter 6735 * @idx: the port index 6736 * 6737 * Returns a bitmap indicating which MPS buffer groups are associated 6738 * with the given port. Bit i is set if buffer group i is used by the 6739 * port. 6740 */ 6741 static unsigned int t4_get_mps_bg_map(struct adapter *adap, int idx) 6742 { 6743 u32 n; 6744 6745 if (adap->params.mps_bg_map) 6746 return ((adap->params.mps_bg_map >> (idx << 3)) & 0xff); 6747 6748 n = G_NUMPORTS(t4_read_reg(adap, A_MPS_CMN_CTL)); 6749 if (n == 0) 6750 return idx == 0 ? 0xf : 0; 6751 if (n == 1 && chip_id(adap) <= CHELSIO_T5) 6752 return idx < 2 ? (3 << (2 * idx)) : 0; 6753 return 1 << idx; 6754 } 6755 6756 /* 6757 * TP RX e-channels associated with the port. 6758 */ 6759 static unsigned int t4_get_rx_e_chan_map(struct adapter *adap, int idx) 6760 { 6761 u32 n = G_NUMPORTS(t4_read_reg(adap, A_MPS_CMN_CTL)); 6762 const u32 all_chan = (1 << adap->chip_params->nchan) - 1; 6763 6764 if (n == 0) 6765 return idx == 0 ? all_chan : 0; 6766 if (n == 1 && chip_id(adap) <= CHELSIO_T5) 6767 return idx < 2 ? (3 << (2 * idx)) : 0; 6768 return 1 << idx; 6769 } 6770 6771 /* 6772 * TP RX c-channel associated with the port. 6773 */ 6774 static unsigned int t4_get_rx_c_chan(struct adapter *adap, int idx) 6775 { 6776 u32 param, val; 6777 int ret; 6778 6779 param = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | 6780 V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_TPCHMAP)); 6781 ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 1, ¶m, &val); 6782 if (!ret) 6783 return (val >> (8 * idx)) & 0xff; 6784 6785 return 0; 6786 } 6787 6788 /** 6789 * t4_get_port_type_description - return Port Type string description 6790 * @port_type: firmware Port Type enumeration 6791 */ 6792 const char *t4_get_port_type_description(enum fw_port_type port_type) 6793 { 6794 static const char *const port_type_description[] = { 6795 "Fiber_XFI", 6796 "Fiber_XAUI", 6797 "BT_SGMII", 6798 "BT_XFI", 6799 "BT_XAUI", 6800 "KX4", 6801 "CX4", 6802 "KX", 6803 "KR", 6804 "SFP", 6805 "BP_AP", 6806 "BP4_AP", 6807 "QSFP_10G", 6808 "QSA", 6809 "QSFP", 6810 "BP40_BA", 6811 "KR4_100G", 6812 "CR4_QSFP", 6813 "CR_QSFP", 6814 "CR2_QSFP", 6815 "SFP28", 6816 "KR_SFP28", 6817 "KR_XLAUI", 6818 }; 6819 6820 if (port_type < ARRAY_SIZE(port_type_description)) 6821 return port_type_description[port_type]; 6822 return "UNKNOWN"; 6823 } 6824 6825 /** 6826 * t4_get_port_stats_offset - collect port stats relative to a previous 6827 * snapshot 6828 * @adap: The adapter 6829 * @idx: The port 6830 * @stats: Current stats to fill 6831 * @offset: Previous stats snapshot 6832 */ 6833 void t4_get_port_stats_offset(struct adapter *adap, int idx, 6834 struct port_stats *stats, 6835 struct port_stats *offset) 6836 { 6837 u64 *s, *o; 6838 int i; 6839 6840 t4_get_port_stats(adap, idx, stats); 6841 for (i = 0, s = (u64 *)stats, o = (u64 *)offset ; 6842 i < (sizeof(struct port_stats)/sizeof(u64)) ; 6843 i++, s++, o++) 6844 *s -= *o; 6845 } 6846 6847 /** 6848 * t4_get_port_stats - collect port statistics 6849 * @adap: the adapter 6850 * @idx: the port index 6851 * @p: the stats structure to fill 6852 * 6853 * Collect statistics related to the given port from HW. 6854 */ 6855 void t4_get_port_stats(struct adapter *adap, int idx, struct port_stats *p) 6856 { 6857 struct port_info *pi = adap->port[idx]; 6858 u32 bgmap = pi->mps_bg_map; 6859 u32 stat_ctl = t4_read_reg(adap, A_MPS_STAT_CTL); 6860 6861 #define GET_STAT(name) \ 6862 t4_read_reg64(adap, \ 6863 t4_port_reg(adap, pi->tx_chan, A_MPS_PORT_STAT_##name##_L)); 6864 #define GET_STAT_COM(name) t4_read_reg64(adap, A_MPS_STAT_##name##_L) 6865 6866 p->tx_pause = GET_STAT(TX_PORT_PAUSE); 6867 p->tx_octets = GET_STAT(TX_PORT_BYTES); 6868 p->tx_frames = GET_STAT(TX_PORT_FRAMES); 6869 p->tx_bcast_frames = GET_STAT(TX_PORT_BCAST); 6870 p->tx_mcast_frames = GET_STAT(TX_PORT_MCAST); 6871 p->tx_ucast_frames = GET_STAT(TX_PORT_UCAST); 6872 p->tx_error_frames = GET_STAT(TX_PORT_ERROR); 6873 p->tx_frames_64 = GET_STAT(TX_PORT_64B); 6874 p->tx_frames_65_127 = GET_STAT(TX_PORT_65B_127B); 6875 p->tx_frames_128_255 = GET_STAT(TX_PORT_128B_255B); 6876 p->tx_frames_256_511 = GET_STAT(TX_PORT_256B_511B); 6877 p->tx_frames_512_1023 = GET_STAT(TX_PORT_512B_1023B); 6878 p->tx_frames_1024_1518 = GET_STAT(TX_PORT_1024B_1518B); 6879 p->tx_frames_1519_max = GET_STAT(TX_PORT_1519B_MAX); 6880 p->tx_drop = GET_STAT(TX_PORT_DROP); 6881 p->tx_ppp0 = GET_STAT(TX_PORT_PPP0); 6882 p->tx_ppp1 = GET_STAT(TX_PORT_PPP1); 6883 p->tx_ppp2 = GET_STAT(TX_PORT_PPP2); 6884 p->tx_ppp3 = GET_STAT(TX_PORT_PPP3); 6885 p->tx_ppp4 = GET_STAT(TX_PORT_PPP4); 6886 p->tx_ppp5 = GET_STAT(TX_PORT_PPP5); 6887 p->tx_ppp6 = GET_STAT(TX_PORT_PPP6); 6888 p->tx_ppp7 = GET_STAT(TX_PORT_PPP7); 6889 6890 if (chip_id(adap) >= CHELSIO_T5) { 6891 if (stat_ctl & F_COUNTPAUSESTATTX) { 6892 p->tx_frames -= p->tx_pause; 6893 p->tx_octets -= p->tx_pause * 64; 6894 } 6895 if (stat_ctl & F_COUNTPAUSEMCTX) 6896 p->tx_mcast_frames -= p->tx_pause; 6897 } 6898 6899 p->rx_pause = GET_STAT(RX_PORT_PAUSE); 6900 p->rx_octets = GET_STAT(RX_PORT_BYTES); 6901 p->rx_frames = GET_STAT(RX_PORT_FRAMES); 6902 p->rx_bcast_frames = GET_STAT(RX_PORT_BCAST); 6903 p->rx_mcast_frames = GET_STAT(RX_PORT_MCAST); 6904 p->rx_ucast_frames = GET_STAT(RX_PORT_UCAST); 6905 p->rx_too_long = GET_STAT(RX_PORT_MTU_ERROR); 6906 p->rx_jabber = GET_STAT(RX_PORT_MTU_CRC_ERROR); 6907 p->rx_len_err = GET_STAT(RX_PORT_LEN_ERROR); 6908 p->rx_symbol_err = GET_STAT(RX_PORT_SYM_ERROR); 6909 p->rx_runt = GET_STAT(RX_PORT_LESS_64B); 6910 p->rx_frames_64 = GET_STAT(RX_PORT_64B); 6911 p->rx_frames_65_127 = GET_STAT(RX_PORT_65B_127B); 6912 p->rx_frames_128_255 = GET_STAT(RX_PORT_128B_255B); 6913 p->rx_frames_256_511 = GET_STAT(RX_PORT_256B_511B); 6914 p->rx_frames_512_1023 = GET_STAT(RX_PORT_512B_1023B); 6915 p->rx_frames_1024_1518 = GET_STAT(RX_PORT_1024B_1518B); 6916 p->rx_frames_1519_max = GET_STAT(RX_PORT_1519B_MAX); 6917 p->rx_ppp0 = GET_STAT(RX_PORT_PPP0); 6918 p->rx_ppp1 = GET_STAT(RX_PORT_PPP1); 6919 p->rx_ppp2 = GET_STAT(RX_PORT_PPP2); 6920 p->rx_ppp3 = GET_STAT(RX_PORT_PPP3); 6921 p->rx_ppp4 = GET_STAT(RX_PORT_PPP4); 6922 p->rx_ppp5 = GET_STAT(RX_PORT_PPP5); 6923 p->rx_ppp6 = GET_STAT(RX_PORT_PPP6); 6924 p->rx_ppp7 = GET_STAT(RX_PORT_PPP7); 6925 6926 if (pi->fcs_reg != -1) 6927 p->rx_fcs_err = t4_read_reg64(adap, pi->fcs_reg) - pi->fcs_base; 6928 6929 if (chip_id(adap) >= CHELSIO_T5) { 6930 if (stat_ctl & F_COUNTPAUSESTATRX) { 6931 p->rx_frames -= p->rx_pause; 6932 p->rx_octets -= p->rx_pause * 64; 6933 } 6934 if (stat_ctl & F_COUNTPAUSEMCRX) 6935 p->rx_mcast_frames -= p->rx_pause; 6936 } 6937 6938 p->rx_ovflow0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_MAC_DROP_FRAME) : 0; 6939 p->rx_ovflow1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_MAC_DROP_FRAME) : 0; 6940 p->rx_ovflow2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_MAC_DROP_FRAME) : 0; 6941 p->rx_ovflow3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_MAC_DROP_FRAME) : 0; 6942 p->rx_trunc0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_MAC_TRUNC_FRAME) : 0; 6943 p->rx_trunc1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_MAC_TRUNC_FRAME) : 0; 6944 p->rx_trunc2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_MAC_TRUNC_FRAME) : 0; 6945 p->rx_trunc3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_MAC_TRUNC_FRAME) : 0; 6946 6947 #undef GET_STAT 6948 #undef GET_STAT_COM 6949 } 6950 6951 /** 6952 * t4_get_lb_stats - collect loopback port statistics 6953 * @adap: the adapter 6954 * @idx: the loopback port index 6955 * @p: the stats structure to fill 6956 * 6957 * Return HW statistics for the given loopback port. 6958 */ 6959 void t4_get_lb_stats(struct adapter *adap, int idx, struct lb_port_stats *p) 6960 { 6961 6962 #define GET_STAT(name) \ 6963 t4_read_reg64(adap, \ 6964 t4_port_reg(adap, idx, A_MPS_PORT_STAT_LB_PORT_##name##_L)) 6965 #define GET_STAT_COM(name) t4_read_reg64(adap, A_MPS_STAT_##name##_L) 6966 6967 p->octets = GET_STAT(BYTES); 6968 p->frames = GET_STAT(FRAMES); 6969 p->bcast_frames = GET_STAT(BCAST); 6970 p->mcast_frames = GET_STAT(MCAST); 6971 p->ucast_frames = GET_STAT(UCAST); 6972 p->error_frames = GET_STAT(ERROR); 6973 6974 p->frames_64 = GET_STAT(64B); 6975 p->frames_65_127 = GET_STAT(65B_127B); 6976 p->frames_128_255 = GET_STAT(128B_255B); 6977 p->frames_256_511 = GET_STAT(256B_511B); 6978 p->frames_512_1023 = GET_STAT(512B_1023B); 6979 p->frames_1024_1518 = GET_STAT(1024B_1518B); 6980 p->frames_1519_max = GET_STAT(1519B_MAX); 6981 p->drop = GET_STAT(DROP_FRAMES); 6982 6983 if (idx < adap->params.nports) { 6984 u32 bg = adap2pinfo(adap, idx)->mps_bg_map; 6985 6986 p->ovflow0 = (bg & 1) ? GET_STAT_COM(RX_BG_0_LB_DROP_FRAME) : 0; 6987 p->ovflow1 = (bg & 2) ? GET_STAT_COM(RX_BG_1_LB_DROP_FRAME) : 0; 6988 p->ovflow2 = (bg & 4) ? GET_STAT_COM(RX_BG_2_LB_DROP_FRAME) : 0; 6989 p->ovflow3 = (bg & 8) ? GET_STAT_COM(RX_BG_3_LB_DROP_FRAME) : 0; 6990 p->trunc0 = (bg & 1) ? GET_STAT_COM(RX_BG_0_LB_TRUNC_FRAME) : 0; 6991 p->trunc1 = (bg & 2) ? GET_STAT_COM(RX_BG_1_LB_TRUNC_FRAME) : 0; 6992 p->trunc2 = (bg & 4) ? GET_STAT_COM(RX_BG_2_LB_TRUNC_FRAME) : 0; 6993 p->trunc3 = (bg & 8) ? GET_STAT_COM(RX_BG_3_LB_TRUNC_FRAME) : 0; 6994 } 6995 6996 #undef GET_STAT 6997 #undef GET_STAT_COM 6998 } 6999 7000 /** 7001 * t4_wol_magic_enable - enable/disable magic packet WoL 7002 * @adap: the adapter 7003 * @port: the physical port index 7004 * @addr: MAC address expected in magic packets, %NULL to disable 7005 * 7006 * Enables/disables magic packet wake-on-LAN for the selected port. 7007 */ 7008 void t4_wol_magic_enable(struct adapter *adap, unsigned int port, 7009 const u8 *addr) 7010 { 7011 u32 mag_id_reg_l, mag_id_reg_h, port_cfg_reg; 7012 7013 if (is_t4(adap)) { 7014 mag_id_reg_l = PORT_REG(port, A_XGMAC_PORT_MAGIC_MACID_LO); 7015 mag_id_reg_h = PORT_REG(port, A_XGMAC_PORT_MAGIC_MACID_HI); 7016 port_cfg_reg = PORT_REG(port, A_XGMAC_PORT_CFG2); 7017 } else { 7018 mag_id_reg_l = T5_PORT_REG(port, A_MAC_PORT_MAGIC_MACID_LO); 7019 mag_id_reg_h = T5_PORT_REG(port, A_MAC_PORT_MAGIC_MACID_HI); 7020 port_cfg_reg = T5_PORT_REG(port, A_MAC_PORT_CFG2); 7021 } 7022 7023 if (addr) { 7024 t4_write_reg(adap, mag_id_reg_l, 7025 (addr[2] << 24) | (addr[3] << 16) | 7026 (addr[4] << 8) | addr[5]); 7027 t4_write_reg(adap, mag_id_reg_h, 7028 (addr[0] << 8) | addr[1]); 7029 } 7030 t4_set_reg_field(adap, port_cfg_reg, F_MAGICEN, 7031 V_MAGICEN(addr != NULL)); 7032 } 7033 7034 /** 7035 * t4_wol_pat_enable - enable/disable pattern-based WoL 7036 * @adap: the adapter 7037 * @port: the physical port index 7038 * @map: bitmap of which HW pattern filters to set 7039 * @mask0: byte mask for bytes 0-63 of a packet 7040 * @mask1: byte mask for bytes 64-127 of a packet 7041 * @crc: Ethernet CRC for selected bytes 7042 * @enable: enable/disable switch 7043 * 7044 * Sets the pattern filters indicated in @map to mask out the bytes 7045 * specified in @mask0/@mask1 in received packets and compare the CRC of 7046 * the resulting packet against @crc. If @enable is %true pattern-based 7047 * WoL is enabled, otherwise disabled. 7048 */ 7049 int t4_wol_pat_enable(struct adapter *adap, unsigned int port, unsigned int map, 7050 u64 mask0, u64 mask1, unsigned int crc, bool enable) 7051 { 7052 int i; 7053 u32 port_cfg_reg; 7054 7055 if (is_t4(adap)) 7056 port_cfg_reg = PORT_REG(port, A_XGMAC_PORT_CFG2); 7057 else 7058 port_cfg_reg = T5_PORT_REG(port, A_MAC_PORT_CFG2); 7059 7060 if (!enable) { 7061 t4_set_reg_field(adap, port_cfg_reg, F_PATEN, 0); 7062 return 0; 7063 } 7064 if (map > 0xff) 7065 return -EINVAL; 7066 7067 #define EPIO_REG(name) \ 7068 (is_t4(adap) ? PORT_REG(port, A_XGMAC_PORT_EPIO_##name) : \ 7069 T5_PORT_REG(port, A_MAC_PORT_EPIO_##name)) 7070 7071 t4_write_reg(adap, EPIO_REG(DATA1), mask0 >> 32); 7072 t4_write_reg(adap, EPIO_REG(DATA2), mask1); 7073 t4_write_reg(adap, EPIO_REG(DATA3), mask1 >> 32); 7074 7075 for (i = 0; i < NWOL_PAT; i++, map >>= 1) { 7076 if (!(map & 1)) 7077 continue; 7078 7079 /* write byte masks */ 7080 t4_write_reg(adap, EPIO_REG(DATA0), mask0); 7081 t4_write_reg(adap, EPIO_REG(OP), V_ADDRESS(i) | F_EPIOWR); 7082 t4_read_reg(adap, EPIO_REG(OP)); /* flush */ 7083 if (t4_read_reg(adap, EPIO_REG(OP)) & F_BUSY) 7084 return -ETIMEDOUT; 7085 7086 /* write CRC */ 7087 t4_write_reg(adap, EPIO_REG(DATA0), crc); 7088 t4_write_reg(adap, EPIO_REG(OP), V_ADDRESS(i + 32) | F_EPIOWR); 7089 t4_read_reg(adap, EPIO_REG(OP)); /* flush */ 7090 if (t4_read_reg(adap, EPIO_REG(OP)) & F_BUSY) 7091 return -ETIMEDOUT; 7092 } 7093 #undef EPIO_REG 7094 7095 t4_set_reg_field(adap, port_cfg_reg, 0, F_PATEN); 7096 return 0; 7097 } 7098 7099 /* t4_mk_filtdelwr - create a delete filter WR 7100 * @ftid: the filter ID 7101 * @wr: the filter work request to populate 7102 * @qid: ingress queue to receive the delete notification 7103 * 7104 * Creates a filter work request to delete the supplied filter. If @qid is 7105 * negative the delete notification is suppressed. 7106 */ 7107 void t4_mk_filtdelwr(unsigned int ftid, struct fw_filter_wr *wr, int qid) 7108 { 7109 memset(wr, 0, sizeof(*wr)); 7110 wr->op_pkd = cpu_to_be32(V_FW_WR_OP(FW_FILTER_WR)); 7111 wr->len16_pkd = cpu_to_be32(V_FW_WR_LEN16(sizeof(*wr) / 16)); 7112 wr->tid_to_iq = cpu_to_be32(V_FW_FILTER_WR_TID(ftid) | 7113 V_FW_FILTER_WR_NOREPLY(qid < 0)); 7114 wr->del_filter_to_l2tix = cpu_to_be32(F_FW_FILTER_WR_DEL_FILTER); 7115 if (qid >= 0) 7116 wr->rx_chan_rx_rpl_iq = 7117 cpu_to_be16(V_FW_FILTER_WR_RX_RPL_IQ(qid)); 7118 } 7119 7120 #define INIT_CMD(var, cmd, rd_wr) do { \ 7121 (var).op_to_write = cpu_to_be32(V_FW_CMD_OP(FW_##cmd##_CMD) | \ 7122 F_FW_CMD_REQUEST | \ 7123 F_FW_CMD_##rd_wr); \ 7124 (var).retval_len16 = cpu_to_be32(FW_LEN16(var)); \ 7125 } while (0) 7126 7127 int t4_fwaddrspace_write(struct adapter *adap, unsigned int mbox, 7128 u32 addr, u32 val) 7129 { 7130 u32 ldst_addrspace; 7131 struct fw_ldst_cmd c; 7132 7133 memset(&c, 0, sizeof(c)); 7134 ldst_addrspace = V_FW_LDST_CMD_ADDRSPACE(FW_LDST_ADDRSPC_FIRMWARE); 7135 c.op_to_addrspace = cpu_to_be32(V_FW_CMD_OP(FW_LDST_CMD) | 7136 F_FW_CMD_REQUEST | 7137 F_FW_CMD_WRITE | 7138 ldst_addrspace); 7139 c.cycles_to_len16 = cpu_to_be32(FW_LEN16(c)); 7140 c.u.addrval.addr = cpu_to_be32(addr); 7141 c.u.addrval.val = cpu_to_be32(val); 7142 7143 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); 7144 } 7145 7146 /** 7147 * t4_mdio_rd - read a PHY register through MDIO 7148 * @adap: the adapter 7149 * @mbox: mailbox to use for the FW command 7150 * @phy_addr: the PHY address 7151 * @mmd: the PHY MMD to access (0 for clause 22 PHYs) 7152 * @reg: the register to read 7153 * @valp: where to store the value 7154 * 7155 * Issues a FW command through the given mailbox to read a PHY register. 7156 */ 7157 int t4_mdio_rd(struct adapter *adap, unsigned int mbox, unsigned int phy_addr, 7158 unsigned int mmd, unsigned int reg, unsigned int *valp) 7159 { 7160 int ret; 7161 u32 ldst_addrspace; 7162 struct fw_ldst_cmd c; 7163 7164 memset(&c, 0, sizeof(c)); 7165 ldst_addrspace = V_FW_LDST_CMD_ADDRSPACE(FW_LDST_ADDRSPC_MDIO); 7166 c.op_to_addrspace = cpu_to_be32(V_FW_CMD_OP(FW_LDST_CMD) | 7167 F_FW_CMD_REQUEST | F_FW_CMD_READ | 7168 ldst_addrspace); 7169 c.cycles_to_len16 = cpu_to_be32(FW_LEN16(c)); 7170 c.u.mdio.paddr_mmd = cpu_to_be16(V_FW_LDST_CMD_PADDR(phy_addr) | 7171 V_FW_LDST_CMD_MMD(mmd)); 7172 c.u.mdio.raddr = cpu_to_be16(reg); 7173 7174 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); 7175 if (ret == 0) 7176 *valp = be16_to_cpu(c.u.mdio.rval); 7177 return ret; 7178 } 7179 7180 /** 7181 * t4_mdio_wr - write a PHY register through MDIO 7182 * @adap: the adapter 7183 * @mbox: mailbox to use for the FW command 7184 * @phy_addr: the PHY address 7185 * @mmd: the PHY MMD to access (0 for clause 22 PHYs) 7186 * @reg: the register to write 7187 * @valp: value to write 7188 * 7189 * Issues a FW command through the given mailbox to write a PHY register. 7190 */ 7191 int t4_mdio_wr(struct adapter *adap, unsigned int mbox, unsigned int phy_addr, 7192 unsigned int mmd, unsigned int reg, unsigned int val) 7193 { 7194 u32 ldst_addrspace; 7195 struct fw_ldst_cmd c; 7196 7197 memset(&c, 0, sizeof(c)); 7198 ldst_addrspace = V_FW_LDST_CMD_ADDRSPACE(FW_LDST_ADDRSPC_MDIO); 7199 c.op_to_addrspace = cpu_to_be32(V_FW_CMD_OP(FW_LDST_CMD) | 7200 F_FW_CMD_REQUEST | F_FW_CMD_WRITE | 7201 ldst_addrspace); 7202 c.cycles_to_len16 = cpu_to_be32(FW_LEN16(c)); 7203 c.u.mdio.paddr_mmd = cpu_to_be16(V_FW_LDST_CMD_PADDR(phy_addr) | 7204 V_FW_LDST_CMD_MMD(mmd)); 7205 c.u.mdio.raddr = cpu_to_be16(reg); 7206 c.u.mdio.rval = cpu_to_be16(val); 7207 7208 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); 7209 } 7210 7211 /** 7212 * 7213 * t4_sge_decode_idma_state - decode the idma state 7214 * @adap: the adapter 7215 * @state: the state idma is stuck in 7216 */ 7217 void t4_sge_decode_idma_state(struct adapter *adapter, int state) 7218 { 7219 static const char * const t4_decode[] = { 7220 "IDMA_IDLE", 7221 "IDMA_PUSH_MORE_CPL_FIFO", 7222 "IDMA_PUSH_CPL_MSG_HEADER_TO_FIFO", 7223 "Not used", 7224 "IDMA_PHYSADDR_SEND_PCIEHDR", 7225 "IDMA_PHYSADDR_SEND_PAYLOAD_FIRST", 7226 "IDMA_PHYSADDR_SEND_PAYLOAD", 7227 "IDMA_SEND_FIFO_TO_IMSG", 7228 "IDMA_FL_REQ_DATA_FL_PREP", 7229 "IDMA_FL_REQ_DATA_FL", 7230 "IDMA_FL_DROP", 7231 "IDMA_FL_H_REQ_HEADER_FL", 7232 "IDMA_FL_H_SEND_PCIEHDR", 7233 "IDMA_FL_H_PUSH_CPL_FIFO", 7234 "IDMA_FL_H_SEND_CPL", 7235 "IDMA_FL_H_SEND_IP_HDR_FIRST", 7236 "IDMA_FL_H_SEND_IP_HDR", 7237 "IDMA_FL_H_REQ_NEXT_HEADER_FL", 7238 "IDMA_FL_H_SEND_NEXT_PCIEHDR", 7239 "IDMA_FL_H_SEND_IP_HDR_PADDING", 7240 "IDMA_FL_D_SEND_PCIEHDR", 7241 "IDMA_FL_D_SEND_CPL_AND_IP_HDR", 7242 "IDMA_FL_D_REQ_NEXT_DATA_FL", 7243 "IDMA_FL_SEND_PCIEHDR", 7244 "IDMA_FL_PUSH_CPL_FIFO", 7245 "IDMA_FL_SEND_CPL", 7246 "IDMA_FL_SEND_PAYLOAD_FIRST", 7247 "IDMA_FL_SEND_PAYLOAD", 7248 "IDMA_FL_REQ_NEXT_DATA_FL", 7249 "IDMA_FL_SEND_NEXT_PCIEHDR", 7250 "IDMA_FL_SEND_PADDING", 7251 "IDMA_FL_SEND_COMPLETION_TO_IMSG", 7252 "IDMA_FL_SEND_FIFO_TO_IMSG", 7253 "IDMA_FL_REQ_DATAFL_DONE", 7254 "IDMA_FL_REQ_HEADERFL_DONE", 7255 }; 7256 static const char * const t5_decode[] = { 7257 "IDMA_IDLE", 7258 "IDMA_ALMOST_IDLE", 7259 "IDMA_PUSH_MORE_CPL_FIFO", 7260 "IDMA_PUSH_CPL_MSG_HEADER_TO_FIFO", 7261 "IDMA_SGEFLRFLUSH_SEND_PCIEHDR", 7262 "IDMA_PHYSADDR_SEND_PCIEHDR", 7263 "IDMA_PHYSADDR_SEND_PAYLOAD_FIRST", 7264 "IDMA_PHYSADDR_SEND_PAYLOAD", 7265 "IDMA_SEND_FIFO_TO_IMSG", 7266 "IDMA_FL_REQ_DATA_FL", 7267 "IDMA_FL_DROP", 7268 "IDMA_FL_DROP_SEND_INC", 7269 "IDMA_FL_H_REQ_HEADER_FL", 7270 "IDMA_FL_H_SEND_PCIEHDR", 7271 "IDMA_FL_H_PUSH_CPL_FIFO", 7272 "IDMA_FL_H_SEND_CPL", 7273 "IDMA_FL_H_SEND_IP_HDR_FIRST", 7274 "IDMA_FL_H_SEND_IP_HDR", 7275 "IDMA_FL_H_REQ_NEXT_HEADER_FL", 7276 "IDMA_FL_H_SEND_NEXT_PCIEHDR", 7277 "IDMA_FL_H_SEND_IP_HDR_PADDING", 7278 "IDMA_FL_D_SEND_PCIEHDR", 7279 "IDMA_FL_D_SEND_CPL_AND_IP_HDR", 7280 "IDMA_FL_D_REQ_NEXT_DATA_FL", 7281 "IDMA_FL_SEND_PCIEHDR", 7282 "IDMA_FL_PUSH_CPL_FIFO", 7283 "IDMA_FL_SEND_CPL", 7284 "IDMA_FL_SEND_PAYLOAD_FIRST", 7285 "IDMA_FL_SEND_PAYLOAD", 7286 "IDMA_FL_REQ_NEXT_DATA_FL", 7287 "IDMA_FL_SEND_NEXT_PCIEHDR", 7288 "IDMA_FL_SEND_PADDING", 7289 "IDMA_FL_SEND_COMPLETION_TO_IMSG", 7290 }; 7291 static const char * const t6_decode[] = { 7292 "IDMA_IDLE", 7293 "IDMA_PUSH_MORE_CPL_FIFO", 7294 "IDMA_PUSH_CPL_MSG_HEADER_TO_FIFO", 7295 "IDMA_SGEFLRFLUSH_SEND_PCIEHDR", 7296 "IDMA_PHYSADDR_SEND_PCIEHDR", 7297 "IDMA_PHYSADDR_SEND_PAYLOAD_FIRST", 7298 "IDMA_PHYSADDR_SEND_PAYLOAD", 7299 "IDMA_FL_REQ_DATA_FL", 7300 "IDMA_FL_DROP", 7301 "IDMA_FL_DROP_SEND_INC", 7302 "IDMA_FL_H_REQ_HEADER_FL", 7303 "IDMA_FL_H_SEND_PCIEHDR", 7304 "IDMA_FL_H_PUSH_CPL_FIFO", 7305 "IDMA_FL_H_SEND_CPL", 7306 "IDMA_FL_H_SEND_IP_HDR_FIRST", 7307 "IDMA_FL_H_SEND_IP_HDR", 7308 "IDMA_FL_H_REQ_NEXT_HEADER_FL", 7309 "IDMA_FL_H_SEND_NEXT_PCIEHDR", 7310 "IDMA_FL_H_SEND_IP_HDR_PADDING", 7311 "IDMA_FL_D_SEND_PCIEHDR", 7312 "IDMA_FL_D_SEND_CPL_AND_IP_HDR", 7313 "IDMA_FL_D_REQ_NEXT_DATA_FL", 7314 "IDMA_FL_SEND_PCIEHDR", 7315 "IDMA_FL_PUSH_CPL_FIFO", 7316 "IDMA_FL_SEND_CPL", 7317 "IDMA_FL_SEND_PAYLOAD_FIRST", 7318 "IDMA_FL_SEND_PAYLOAD", 7319 "IDMA_FL_REQ_NEXT_DATA_FL", 7320 "IDMA_FL_SEND_NEXT_PCIEHDR", 7321 "IDMA_FL_SEND_PADDING", 7322 "IDMA_FL_SEND_COMPLETION_TO_IMSG", 7323 }; 7324 static const u32 sge_regs[] = { 7325 A_SGE_DEBUG_DATA_LOW_INDEX_2, 7326 A_SGE_DEBUG_DATA_LOW_INDEX_3, 7327 A_SGE_DEBUG_DATA_HIGH_INDEX_10, 7328 }; 7329 const char * const *sge_idma_decode; 7330 int sge_idma_decode_nstates; 7331 int i; 7332 unsigned int chip_version = chip_id(adapter); 7333 7334 /* Select the right set of decode strings to dump depending on the 7335 * adapter chip type. 7336 */ 7337 switch (chip_version) { 7338 case CHELSIO_T4: 7339 sge_idma_decode = (const char * const *)t4_decode; 7340 sge_idma_decode_nstates = ARRAY_SIZE(t4_decode); 7341 break; 7342 7343 case CHELSIO_T5: 7344 sge_idma_decode = (const char * const *)t5_decode; 7345 sge_idma_decode_nstates = ARRAY_SIZE(t5_decode); 7346 break; 7347 7348 case CHELSIO_T6: 7349 sge_idma_decode = (const char * const *)t6_decode; 7350 sge_idma_decode_nstates = ARRAY_SIZE(t6_decode); 7351 break; 7352 7353 default: 7354 CH_ERR(adapter, "Unsupported chip version %d\n", chip_version); 7355 return; 7356 } 7357 7358 if (state < sge_idma_decode_nstates) 7359 CH_WARN(adapter, "idma state %s\n", sge_idma_decode[state]); 7360 else 7361 CH_WARN(adapter, "idma state %d unknown\n", state); 7362 7363 for (i = 0; i < ARRAY_SIZE(sge_regs); i++) 7364 CH_WARN(adapter, "SGE register %#x value %#x\n", 7365 sge_regs[i], t4_read_reg(adapter, sge_regs[i])); 7366 } 7367 7368 /** 7369 * t4_sge_ctxt_flush - flush the SGE context cache 7370 * @adap: the adapter 7371 * @mbox: mailbox to use for the FW command 7372 * 7373 * Issues a FW command through the given mailbox to flush the 7374 * SGE context cache. 7375 */ 7376 int t4_sge_ctxt_flush(struct adapter *adap, unsigned int mbox, int ctxt_type) 7377 { 7378 int ret; 7379 u32 ldst_addrspace; 7380 struct fw_ldst_cmd c; 7381 7382 memset(&c, 0, sizeof(c)); 7383 ldst_addrspace = V_FW_LDST_CMD_ADDRSPACE(ctxt_type == CTXT_EGRESS ? 7384 FW_LDST_ADDRSPC_SGE_EGRC : 7385 FW_LDST_ADDRSPC_SGE_INGC); 7386 c.op_to_addrspace = cpu_to_be32(V_FW_CMD_OP(FW_LDST_CMD) | 7387 F_FW_CMD_REQUEST | F_FW_CMD_READ | 7388 ldst_addrspace); 7389 c.cycles_to_len16 = cpu_to_be32(FW_LEN16(c)); 7390 c.u.idctxt.msg_ctxtflush = cpu_to_be32(F_FW_LDST_CMD_CTXTFLUSH); 7391 7392 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); 7393 return ret; 7394 } 7395 7396 /** 7397 * t4_fw_hello - establish communication with FW 7398 * @adap: the adapter 7399 * @mbox: mailbox to use for the FW command 7400 * @evt_mbox: mailbox to receive async FW events 7401 * @master: specifies the caller's willingness to be the device master 7402 * @state: returns the current device state (if non-NULL) 7403 * 7404 * Issues a command to establish communication with FW. Returns either 7405 * an error (negative integer) or the mailbox of the Master PF. 7406 */ 7407 int t4_fw_hello(struct adapter *adap, unsigned int mbox, unsigned int evt_mbox, 7408 enum dev_master master, enum dev_state *state) 7409 { 7410 int ret; 7411 struct fw_hello_cmd c; 7412 u32 v; 7413 unsigned int master_mbox; 7414 int retries = FW_CMD_HELLO_RETRIES; 7415 7416 retry: 7417 memset(&c, 0, sizeof(c)); 7418 INIT_CMD(c, HELLO, WRITE); 7419 c.err_to_clearinit = cpu_to_be32( 7420 V_FW_HELLO_CMD_MASTERDIS(master == MASTER_CANT) | 7421 V_FW_HELLO_CMD_MASTERFORCE(master == MASTER_MUST) | 7422 V_FW_HELLO_CMD_MBMASTER(master == MASTER_MUST ? 7423 mbox : M_FW_HELLO_CMD_MBMASTER) | 7424 V_FW_HELLO_CMD_MBASYNCNOT(evt_mbox) | 7425 V_FW_HELLO_CMD_STAGE(FW_HELLO_CMD_STAGE_OS) | 7426 F_FW_HELLO_CMD_CLEARINIT); 7427 7428 /* 7429 * Issue the HELLO command to the firmware. If it's not successful 7430 * but indicates that we got a "busy" or "timeout" condition, retry 7431 * the HELLO until we exhaust our retry limit. If we do exceed our 7432 * retry limit, check to see if the firmware left us any error 7433 * information and report that if so ... 7434 */ 7435 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); 7436 if (ret != FW_SUCCESS) { 7437 if ((ret == -EBUSY || ret == -ETIMEDOUT) && retries-- > 0) 7438 goto retry; 7439 return ret; 7440 } 7441 7442 v = be32_to_cpu(c.err_to_clearinit); 7443 master_mbox = G_FW_HELLO_CMD_MBMASTER(v); 7444 if (state) { 7445 if (v & F_FW_HELLO_CMD_ERR) 7446 *state = DEV_STATE_ERR; 7447 else if (v & F_FW_HELLO_CMD_INIT) 7448 *state = DEV_STATE_INIT; 7449 else 7450 *state = DEV_STATE_UNINIT; 7451 } 7452 7453 /* 7454 * If we're not the Master PF then we need to wait around for the 7455 * Master PF Driver to finish setting up the adapter. 7456 * 7457 * Note that we also do this wait if we're a non-Master-capable PF and 7458 * there is no current Master PF; a Master PF may show up momentarily 7459 * and we wouldn't want to fail pointlessly. (This can happen when an 7460 * OS loads lots of different drivers rapidly at the same time). In 7461 * this case, the Master PF returned by the firmware will be 7462 * M_PCIE_FW_MASTER so the test below will work ... 7463 */ 7464 if ((v & (F_FW_HELLO_CMD_ERR|F_FW_HELLO_CMD_INIT)) == 0 && 7465 master_mbox != mbox) { 7466 int waiting = FW_CMD_HELLO_TIMEOUT; 7467 7468 /* 7469 * Wait for the firmware to either indicate an error or 7470 * initialized state. If we see either of these we bail out 7471 * and report the issue to the caller. If we exhaust the 7472 * "hello timeout" and we haven't exhausted our retries, try 7473 * again. Otherwise bail with a timeout error. 7474 */ 7475 for (;;) { 7476 u32 pcie_fw; 7477 7478 msleep(50); 7479 waiting -= 50; 7480 7481 /* 7482 * If neither Error nor Initialialized are indicated 7483 * by the firmware keep waiting till we exhaust our 7484 * timeout ... and then retry if we haven't exhausted 7485 * our retries ... 7486 */ 7487 pcie_fw = t4_read_reg(adap, A_PCIE_FW); 7488 if (!(pcie_fw & (F_PCIE_FW_ERR|F_PCIE_FW_INIT))) { 7489 if (waiting <= 0) { 7490 if (retries-- > 0) 7491 goto retry; 7492 7493 return -ETIMEDOUT; 7494 } 7495 continue; 7496 } 7497 7498 /* 7499 * We either have an Error or Initialized condition 7500 * report errors preferentially. 7501 */ 7502 if (state) { 7503 if (pcie_fw & F_PCIE_FW_ERR) 7504 *state = DEV_STATE_ERR; 7505 else if (pcie_fw & F_PCIE_FW_INIT) 7506 *state = DEV_STATE_INIT; 7507 } 7508 7509 /* 7510 * If we arrived before a Master PF was selected and 7511 * there's not a valid Master PF, grab its identity 7512 * for our caller. 7513 */ 7514 if (master_mbox == M_PCIE_FW_MASTER && 7515 (pcie_fw & F_PCIE_FW_MASTER_VLD)) 7516 master_mbox = G_PCIE_FW_MASTER(pcie_fw); 7517 break; 7518 } 7519 } 7520 7521 return master_mbox; 7522 } 7523 7524 /** 7525 * t4_fw_bye - end communication with FW 7526 * @adap: the adapter 7527 * @mbox: mailbox to use for the FW command 7528 * 7529 * Issues a command to terminate communication with FW. 7530 */ 7531 int t4_fw_bye(struct adapter *adap, unsigned int mbox) 7532 { 7533 struct fw_bye_cmd c; 7534 7535 memset(&c, 0, sizeof(c)); 7536 INIT_CMD(c, BYE, WRITE); 7537 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); 7538 } 7539 7540 /** 7541 * t4_fw_reset - issue a reset to FW 7542 * @adap: the adapter 7543 * @mbox: mailbox to use for the FW command 7544 * @reset: specifies the type of reset to perform 7545 * 7546 * Issues a reset command of the specified type to FW. 7547 */ 7548 int t4_fw_reset(struct adapter *adap, unsigned int mbox, int reset) 7549 { 7550 struct fw_reset_cmd c; 7551 7552 memset(&c, 0, sizeof(c)); 7553 INIT_CMD(c, RESET, WRITE); 7554 c.val = cpu_to_be32(reset); 7555 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); 7556 } 7557 7558 /** 7559 * t4_fw_halt - issue a reset/halt to FW and put uP into RESET 7560 * @adap: the adapter 7561 * @mbox: mailbox to use for the FW RESET command (if desired) 7562 * @force: force uP into RESET even if FW RESET command fails 7563 * 7564 * Issues a RESET command to firmware (if desired) with a HALT indication 7565 * and then puts the microprocessor into RESET state. The RESET command 7566 * will only be issued if a legitimate mailbox is provided (mbox <= 7567 * M_PCIE_FW_MASTER). 7568 * 7569 * This is generally used in order for the host to safely manipulate the 7570 * adapter without fear of conflicting with whatever the firmware might 7571 * be doing. The only way out of this state is to RESTART the firmware 7572 * ... 7573 */ 7574 int t4_fw_halt(struct adapter *adap, unsigned int mbox, int force) 7575 { 7576 int ret = 0; 7577 7578 /* 7579 * If a legitimate mailbox is provided, issue a RESET command 7580 * with a HALT indication. 7581 */ 7582 if (adap->flags & FW_OK && mbox <= M_PCIE_FW_MASTER) { 7583 struct fw_reset_cmd c; 7584 7585 memset(&c, 0, sizeof(c)); 7586 INIT_CMD(c, RESET, WRITE); 7587 c.val = cpu_to_be32(F_PIORST | F_PIORSTMODE); 7588 c.halt_pkd = cpu_to_be32(F_FW_RESET_CMD_HALT); 7589 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); 7590 } 7591 7592 /* 7593 * Normally we won't complete the operation if the firmware RESET 7594 * command fails but if our caller insists we'll go ahead and put the 7595 * uP into RESET. This can be useful if the firmware is hung or even 7596 * missing ... We'll have to take the risk of putting the uP into 7597 * RESET without the cooperation of firmware in that case. 7598 * 7599 * We also force the firmware's HALT flag to be on in case we bypassed 7600 * the firmware RESET command above or we're dealing with old firmware 7601 * which doesn't have the HALT capability. This will serve as a flag 7602 * for the incoming firmware to know that it's coming out of a HALT 7603 * rather than a RESET ... if it's new enough to understand that ... 7604 */ 7605 if (ret == 0 || force) { 7606 t4_set_reg_field(adap, A_CIM_BOOT_CFG, F_UPCRST, F_UPCRST); 7607 t4_set_reg_field(adap, A_PCIE_FW, F_PCIE_FW_HALT, 7608 F_PCIE_FW_HALT); 7609 } 7610 7611 /* 7612 * And we always return the result of the firmware RESET command 7613 * even when we force the uP into RESET ... 7614 */ 7615 return ret; 7616 } 7617 7618 /** 7619 * t4_fw_restart - restart the firmware by taking the uP out of RESET 7620 * @adap: the adapter 7621 * 7622 * Restart firmware previously halted by t4_fw_halt(). On successful 7623 * return the previous PF Master remains as the new PF Master and there 7624 * is no need to issue a new HELLO command, etc. 7625 */ 7626 int t4_fw_restart(struct adapter *adap, unsigned int mbox) 7627 { 7628 int ms; 7629 7630 t4_set_reg_field(adap, A_CIM_BOOT_CFG, F_UPCRST, 0); 7631 for (ms = 0; ms < FW_CMD_MAX_TIMEOUT; ) { 7632 if (!(t4_read_reg(adap, A_PCIE_FW) & F_PCIE_FW_HALT)) 7633 return FW_SUCCESS; 7634 msleep(100); 7635 ms += 100; 7636 } 7637 7638 return -ETIMEDOUT; 7639 } 7640 7641 /** 7642 * t4_fw_upgrade - perform all of the steps necessary to upgrade FW 7643 * @adap: the adapter 7644 * @mbox: mailbox to use for the FW RESET command (if desired) 7645 * @fw_data: the firmware image to write 7646 * @size: image size 7647 * @force: force upgrade even if firmware doesn't cooperate 7648 * 7649 * Perform all of the steps necessary for upgrading an adapter's 7650 * firmware image. Normally this requires the cooperation of the 7651 * existing firmware in order to halt all existing activities 7652 * but if an invalid mailbox token is passed in we skip that step 7653 * (though we'll still put the adapter microprocessor into RESET in 7654 * that case). 7655 * 7656 * On successful return the new firmware will have been loaded and 7657 * the adapter will have been fully RESET losing all previous setup 7658 * state. On unsuccessful return the adapter may be completely hosed ... 7659 * positive errno indicates that the adapter is ~probably~ intact, a 7660 * negative errno indicates that things are looking bad ... 7661 */ 7662 int t4_fw_upgrade(struct adapter *adap, unsigned int mbox, 7663 const u8 *fw_data, unsigned int size, int force) 7664 { 7665 const struct fw_hdr *fw_hdr = (const struct fw_hdr *)fw_data; 7666 unsigned int bootstrap = 7667 be32_to_cpu(fw_hdr->magic) == FW_HDR_MAGIC_BOOTSTRAP; 7668 int ret; 7669 7670 if (!t4_fw_matches_chip(adap, fw_hdr)) 7671 return -EINVAL; 7672 7673 if (!bootstrap) { 7674 ret = t4_fw_halt(adap, mbox, force); 7675 if (ret < 0 && !force) 7676 return ret; 7677 } 7678 7679 ret = t4_load_fw(adap, fw_data, size); 7680 if (ret < 0 || bootstrap) 7681 return ret; 7682 7683 return t4_fw_restart(adap, mbox); 7684 } 7685 7686 /** 7687 * t4_fw_initialize - ask FW to initialize the device 7688 * @adap: the adapter 7689 * @mbox: mailbox to use for the FW command 7690 * 7691 * Issues a command to FW to partially initialize the device. This 7692 * performs initialization that generally doesn't depend on user input. 7693 */ 7694 int t4_fw_initialize(struct adapter *adap, unsigned int mbox) 7695 { 7696 struct fw_initialize_cmd c; 7697 7698 memset(&c, 0, sizeof(c)); 7699 INIT_CMD(c, INITIALIZE, WRITE); 7700 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); 7701 } 7702 7703 /** 7704 * t4_query_params_rw - query FW or device parameters 7705 * @adap: the adapter 7706 * @mbox: mailbox to use for the FW command 7707 * @pf: the PF 7708 * @vf: the VF 7709 * @nparams: the number of parameters 7710 * @params: the parameter names 7711 * @val: the parameter values 7712 * @rw: Write and read flag 7713 * 7714 * Reads the value of FW or device parameters. Up to 7 parameters can be 7715 * queried at once. 7716 */ 7717 int t4_query_params_rw(struct adapter *adap, unsigned int mbox, unsigned int pf, 7718 unsigned int vf, unsigned int nparams, const u32 *params, 7719 u32 *val, int rw) 7720 { 7721 int i, ret; 7722 struct fw_params_cmd c; 7723 __be32 *p = &c.param[0].mnem; 7724 7725 if (nparams > 7) 7726 return -EINVAL; 7727 7728 memset(&c, 0, sizeof(c)); 7729 c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_PARAMS_CMD) | 7730 F_FW_CMD_REQUEST | F_FW_CMD_READ | 7731 V_FW_PARAMS_CMD_PFN(pf) | 7732 V_FW_PARAMS_CMD_VFN(vf)); 7733 c.retval_len16 = cpu_to_be32(FW_LEN16(c)); 7734 7735 for (i = 0; i < nparams; i++) { 7736 *p++ = cpu_to_be32(*params++); 7737 if (rw) 7738 *p = cpu_to_be32(*(val + i)); 7739 p++; 7740 } 7741 7742 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); 7743 7744 /* 7745 * We always copy back the results, even if there's an error. We'll 7746 * get an error if any of the parameters was unknown to the Firmware, 7747 * but there will be results for the others ... (Older Firmware 7748 * stopped at the first unknown parameter; newer Firmware processes 7749 * them all and flags the unknown parameters with a return value of 7750 * ~0UL.) 7751 */ 7752 for (i = 0, p = &c.param[0].val; i < nparams; i++, p += 2) 7753 *val++ = be32_to_cpu(*p); 7754 7755 return ret; 7756 } 7757 7758 int t4_query_params(struct adapter *adap, unsigned int mbox, unsigned int pf, 7759 unsigned int vf, unsigned int nparams, const u32 *params, 7760 u32 *val) 7761 { 7762 return t4_query_params_rw(adap, mbox, pf, vf, nparams, params, val, 0); 7763 } 7764 7765 /** 7766 * t4_set_params_timeout - sets FW or device parameters 7767 * @adap: the adapter 7768 * @mbox: mailbox to use for the FW command 7769 * @pf: the PF 7770 * @vf: the VF 7771 * @nparams: the number of parameters 7772 * @params: the parameter names 7773 * @val: the parameter values 7774 * @timeout: the timeout time 7775 * 7776 * Sets the value of FW or device parameters. Up to 7 parameters can be 7777 * specified at once. 7778 */ 7779 int t4_set_params_timeout(struct adapter *adap, unsigned int mbox, 7780 unsigned int pf, unsigned int vf, 7781 unsigned int nparams, const u32 *params, 7782 const u32 *val, int timeout) 7783 { 7784 struct fw_params_cmd c; 7785 __be32 *p = &c.param[0].mnem; 7786 7787 if (nparams > 7) 7788 return -EINVAL; 7789 7790 memset(&c, 0, sizeof(c)); 7791 c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_PARAMS_CMD) | 7792 F_FW_CMD_REQUEST | F_FW_CMD_WRITE | 7793 V_FW_PARAMS_CMD_PFN(pf) | 7794 V_FW_PARAMS_CMD_VFN(vf)); 7795 c.retval_len16 = cpu_to_be32(FW_LEN16(c)); 7796 7797 while (nparams--) { 7798 *p++ = cpu_to_be32(*params++); 7799 *p++ = cpu_to_be32(*val++); 7800 } 7801 7802 return t4_wr_mbox_timeout(adap, mbox, &c, sizeof(c), NULL, timeout); 7803 } 7804 7805 /** 7806 * t4_set_params - sets FW or device parameters 7807 * @adap: the adapter 7808 * @mbox: mailbox to use for the FW command 7809 * @pf: the PF 7810 * @vf: the VF 7811 * @nparams: the number of parameters 7812 * @params: the parameter names 7813 * @val: the parameter values 7814 * 7815 * Sets the value of FW or device parameters. Up to 7 parameters can be 7816 * specified at once. 7817 */ 7818 int t4_set_params(struct adapter *adap, unsigned int mbox, unsigned int pf, 7819 unsigned int vf, unsigned int nparams, const u32 *params, 7820 const u32 *val) 7821 { 7822 return t4_set_params_timeout(adap, mbox, pf, vf, nparams, params, val, 7823 FW_CMD_MAX_TIMEOUT); 7824 } 7825 7826 /** 7827 * t4_cfg_pfvf - configure PF/VF resource limits 7828 * @adap: the adapter 7829 * @mbox: mailbox to use for the FW command 7830 * @pf: the PF being configured 7831 * @vf: the VF being configured 7832 * @txq: the max number of egress queues 7833 * @txq_eth_ctrl: the max number of egress Ethernet or control queues 7834 * @rxqi: the max number of interrupt-capable ingress queues 7835 * @rxq: the max number of interruptless ingress queues 7836 * @tc: the PCI traffic class 7837 * @vi: the max number of virtual interfaces 7838 * @cmask: the channel access rights mask for the PF/VF 7839 * @pmask: the port access rights mask for the PF/VF 7840 * @nexact: the maximum number of exact MPS filters 7841 * @rcaps: read capabilities 7842 * @wxcaps: write/execute capabilities 7843 * 7844 * Configures resource limits and capabilities for a physical or virtual 7845 * function. 7846 */ 7847 int t4_cfg_pfvf(struct adapter *adap, unsigned int mbox, unsigned int pf, 7848 unsigned int vf, unsigned int txq, unsigned int txq_eth_ctrl, 7849 unsigned int rxqi, unsigned int rxq, unsigned int tc, 7850 unsigned int vi, unsigned int cmask, unsigned int pmask, 7851 unsigned int nexact, unsigned int rcaps, unsigned int wxcaps) 7852 { 7853 struct fw_pfvf_cmd c; 7854 7855 memset(&c, 0, sizeof(c)); 7856 c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_PFVF_CMD) | F_FW_CMD_REQUEST | 7857 F_FW_CMD_WRITE | V_FW_PFVF_CMD_PFN(pf) | 7858 V_FW_PFVF_CMD_VFN(vf)); 7859 c.retval_len16 = cpu_to_be32(FW_LEN16(c)); 7860 c.niqflint_niq = cpu_to_be32(V_FW_PFVF_CMD_NIQFLINT(rxqi) | 7861 V_FW_PFVF_CMD_NIQ(rxq)); 7862 c.type_to_neq = cpu_to_be32(V_FW_PFVF_CMD_CMASK(cmask) | 7863 V_FW_PFVF_CMD_PMASK(pmask) | 7864 V_FW_PFVF_CMD_NEQ(txq)); 7865 c.tc_to_nexactf = cpu_to_be32(V_FW_PFVF_CMD_TC(tc) | 7866 V_FW_PFVF_CMD_NVI(vi) | 7867 V_FW_PFVF_CMD_NEXACTF(nexact)); 7868 c.r_caps_to_nethctrl = cpu_to_be32(V_FW_PFVF_CMD_R_CAPS(rcaps) | 7869 V_FW_PFVF_CMD_WX_CAPS(wxcaps) | 7870 V_FW_PFVF_CMD_NETHCTRL(txq_eth_ctrl)); 7871 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); 7872 } 7873 7874 /** 7875 * t4_alloc_vi_func - allocate a virtual interface 7876 * @adap: the adapter 7877 * @mbox: mailbox to use for the FW command 7878 * @port: physical port associated with the VI 7879 * @pf: the PF owning the VI 7880 * @vf: the VF owning the VI 7881 * @nmac: number of MAC addresses needed (1 to 5) 7882 * @mac: the MAC addresses of the VI 7883 * @rss_size: size of RSS table slice associated with this VI 7884 * @portfunc: which Port Application Function MAC Address is desired 7885 * @idstype: Intrusion Detection Type 7886 * 7887 * Allocates a virtual interface for the given physical port. If @mac is 7888 * not %NULL it contains the MAC addresses of the VI as assigned by FW. 7889 * If @rss_size is %NULL the VI is not assigned any RSS slice by FW. 7890 * @mac should be large enough to hold @nmac Ethernet addresses, they are 7891 * stored consecutively so the space needed is @nmac * 6 bytes. 7892 * Returns a negative error number or the non-negative VI id. 7893 */ 7894 int t4_alloc_vi_func(struct adapter *adap, unsigned int mbox, 7895 unsigned int port, unsigned int pf, unsigned int vf, 7896 unsigned int nmac, u8 *mac, u16 *rss_size, 7897 uint8_t *vfvld, uint16_t *vin, 7898 unsigned int portfunc, unsigned int idstype) 7899 { 7900 int ret; 7901 struct fw_vi_cmd c; 7902 7903 memset(&c, 0, sizeof(c)); 7904 c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_VI_CMD) | F_FW_CMD_REQUEST | 7905 F_FW_CMD_WRITE | F_FW_CMD_EXEC | 7906 V_FW_VI_CMD_PFN(pf) | V_FW_VI_CMD_VFN(vf)); 7907 c.alloc_to_len16 = cpu_to_be32(F_FW_VI_CMD_ALLOC | FW_LEN16(c)); 7908 c.type_to_viid = cpu_to_be16(V_FW_VI_CMD_TYPE(idstype) | 7909 V_FW_VI_CMD_FUNC(portfunc)); 7910 c.portid_pkd = V_FW_VI_CMD_PORTID(port); 7911 c.nmac = nmac - 1; 7912 if(!rss_size) 7913 c.norss_rsssize = F_FW_VI_CMD_NORSS; 7914 7915 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); 7916 if (ret) 7917 return ret; 7918 ret = G_FW_VI_CMD_VIID(be16_to_cpu(c.type_to_viid)); 7919 7920 if (mac) { 7921 memcpy(mac, c.mac, sizeof(c.mac)); 7922 switch (nmac) { 7923 case 5: 7924 memcpy(mac + 24, c.nmac3, sizeof(c.nmac3)); 7925 case 4: 7926 memcpy(mac + 18, c.nmac2, sizeof(c.nmac2)); 7927 case 3: 7928 memcpy(mac + 12, c.nmac1, sizeof(c.nmac1)); 7929 case 2: 7930 memcpy(mac + 6, c.nmac0, sizeof(c.nmac0)); 7931 } 7932 } 7933 if (rss_size) 7934 *rss_size = G_FW_VI_CMD_RSSSIZE(be16_to_cpu(c.norss_rsssize)); 7935 if (vfvld) { 7936 *vfvld = adap->params.viid_smt_extn_support ? 7937 G_FW_VI_CMD_VFVLD(be32_to_cpu(c.alloc_to_len16)) : 7938 G_FW_VIID_VIVLD(ret); 7939 } 7940 if (vin) { 7941 *vin = adap->params.viid_smt_extn_support ? 7942 G_FW_VI_CMD_VIN(be32_to_cpu(c.alloc_to_len16)) : 7943 G_FW_VIID_VIN(ret); 7944 } 7945 7946 return ret; 7947 } 7948 7949 /** 7950 * t4_alloc_vi - allocate an [Ethernet Function] virtual interface 7951 * @adap: the adapter 7952 * @mbox: mailbox to use for the FW command 7953 * @port: physical port associated with the VI 7954 * @pf: the PF owning the VI 7955 * @vf: the VF owning the VI 7956 * @nmac: number of MAC addresses needed (1 to 5) 7957 * @mac: the MAC addresses of the VI 7958 * @rss_size: size of RSS table slice associated with this VI 7959 * 7960 * backwards compatible and convieniance routine to allocate a Virtual 7961 * Interface with a Ethernet Port Application Function and Intrustion 7962 * Detection System disabled. 7963 */ 7964 int t4_alloc_vi(struct adapter *adap, unsigned int mbox, unsigned int port, 7965 unsigned int pf, unsigned int vf, unsigned int nmac, u8 *mac, 7966 u16 *rss_size, uint8_t *vfvld, uint16_t *vin) 7967 { 7968 return t4_alloc_vi_func(adap, mbox, port, pf, vf, nmac, mac, rss_size, 7969 vfvld, vin, FW_VI_FUNC_ETH, 0); 7970 } 7971 7972 /** 7973 * t4_free_vi - free a virtual interface 7974 * @adap: the adapter 7975 * @mbox: mailbox to use for the FW command 7976 * @pf: the PF owning the VI 7977 * @vf: the VF owning the VI 7978 * @viid: virtual interface identifiler 7979 * 7980 * Free a previously allocated virtual interface. 7981 */ 7982 int t4_free_vi(struct adapter *adap, unsigned int mbox, unsigned int pf, 7983 unsigned int vf, unsigned int viid) 7984 { 7985 struct fw_vi_cmd c; 7986 7987 memset(&c, 0, sizeof(c)); 7988 c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_VI_CMD) | 7989 F_FW_CMD_REQUEST | 7990 F_FW_CMD_EXEC | 7991 V_FW_VI_CMD_PFN(pf) | 7992 V_FW_VI_CMD_VFN(vf)); 7993 c.alloc_to_len16 = cpu_to_be32(F_FW_VI_CMD_FREE | FW_LEN16(c)); 7994 c.type_to_viid = cpu_to_be16(V_FW_VI_CMD_VIID(viid)); 7995 7996 return t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); 7997 } 7998 7999 /** 8000 * t4_set_rxmode - set Rx properties of a virtual interface 8001 * @adap: the adapter 8002 * @mbox: mailbox to use for the FW command 8003 * @viid: the VI id 8004 * @mtu: the new MTU or -1 8005 * @promisc: 1 to enable promiscuous mode, 0 to disable it, -1 no change 8006 * @all_multi: 1 to enable all-multi mode, 0 to disable it, -1 no change 8007 * @bcast: 1 to enable broadcast Rx, 0 to disable it, -1 no change 8008 * @vlanex: 1 to enable HW VLAN extraction, 0 to disable it, -1 no change 8009 * @sleep_ok: if true we may sleep while awaiting command completion 8010 * 8011 * Sets Rx properties of a virtual interface. 8012 */ 8013 int t4_set_rxmode(struct adapter *adap, unsigned int mbox, unsigned int viid, 8014 int mtu, int promisc, int all_multi, int bcast, int vlanex, 8015 bool sleep_ok) 8016 { 8017 struct fw_vi_rxmode_cmd c; 8018 8019 /* convert to FW values */ 8020 if (mtu < 0) 8021 mtu = M_FW_VI_RXMODE_CMD_MTU; 8022 if (promisc < 0) 8023 promisc = M_FW_VI_RXMODE_CMD_PROMISCEN; 8024 if (all_multi < 0) 8025 all_multi = M_FW_VI_RXMODE_CMD_ALLMULTIEN; 8026 if (bcast < 0) 8027 bcast = M_FW_VI_RXMODE_CMD_BROADCASTEN; 8028 if (vlanex < 0) 8029 vlanex = M_FW_VI_RXMODE_CMD_VLANEXEN; 8030 8031 memset(&c, 0, sizeof(c)); 8032 c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_RXMODE_CMD) | 8033 F_FW_CMD_REQUEST | F_FW_CMD_WRITE | 8034 V_FW_VI_RXMODE_CMD_VIID(viid)); 8035 c.retval_len16 = cpu_to_be32(FW_LEN16(c)); 8036 c.mtu_to_vlanexen = 8037 cpu_to_be32(V_FW_VI_RXMODE_CMD_MTU(mtu) | 8038 V_FW_VI_RXMODE_CMD_PROMISCEN(promisc) | 8039 V_FW_VI_RXMODE_CMD_ALLMULTIEN(all_multi) | 8040 V_FW_VI_RXMODE_CMD_BROADCASTEN(bcast) | 8041 V_FW_VI_RXMODE_CMD_VLANEXEN(vlanex)); 8042 return t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), NULL, sleep_ok); 8043 } 8044 8045 /** 8046 * t4_alloc_encap_mac_filt - Adds a mac entry in mps tcam with VNI support 8047 * @adap: the adapter 8048 * @viid: the VI id 8049 * @mac: the MAC address 8050 * @mask: the mask 8051 * @vni: the VNI id for the tunnel protocol 8052 * @vni_mask: mask for the VNI id 8053 * @dip_hit: to enable DIP match for the MPS entry 8054 * @lookup_type: MAC address for inner (1) or outer (0) header 8055 * @sleep_ok: call is allowed to sleep 8056 * 8057 * Allocates an MPS entry with specified MAC address and VNI value. 8058 * 8059 * Returns a negative error number or the allocated index for this mac. 8060 */ 8061 int t4_alloc_encap_mac_filt(struct adapter *adap, unsigned int viid, 8062 const u8 *addr, const u8 *mask, unsigned int vni, 8063 unsigned int vni_mask, u8 dip_hit, u8 lookup_type, 8064 bool sleep_ok) 8065 { 8066 struct fw_vi_mac_cmd c; 8067 struct fw_vi_mac_vni *p = c.u.exact_vni; 8068 int ret = 0; 8069 u32 val; 8070 8071 memset(&c, 0, sizeof(c)); 8072 c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_MAC_CMD) | 8073 F_FW_CMD_REQUEST | F_FW_CMD_WRITE | 8074 V_FW_VI_MAC_CMD_VIID(viid)); 8075 val = V_FW_CMD_LEN16(1) | 8076 V_FW_VI_MAC_CMD_ENTRY_TYPE(FW_VI_MAC_TYPE_EXACTMAC_VNI); 8077 c.freemacs_to_len16 = cpu_to_be32(val); 8078 p->valid_to_idx = cpu_to_be16(F_FW_VI_MAC_CMD_VALID | 8079 V_FW_VI_MAC_CMD_IDX(FW_VI_MAC_ADD_MAC)); 8080 memcpy(p->macaddr, addr, sizeof(p->macaddr)); 8081 memcpy(p->macaddr_mask, mask, sizeof(p->macaddr_mask)); 8082 8083 p->lookup_type_to_vni = cpu_to_be32(V_FW_VI_MAC_CMD_VNI(vni) | 8084 V_FW_VI_MAC_CMD_DIP_HIT(dip_hit) | 8085 V_FW_VI_MAC_CMD_LOOKUP_TYPE(lookup_type)); 8086 p->vni_mask_pkd = cpu_to_be32(V_FW_VI_MAC_CMD_VNI_MASK(vni_mask)); 8087 8088 ret = t4_wr_mbox_meat(adap, adap->mbox, &c, sizeof(c), &c, sleep_ok); 8089 if (ret == 0) 8090 ret = G_FW_VI_MAC_CMD_IDX(be16_to_cpu(p->valid_to_idx)); 8091 return ret; 8092 } 8093 8094 /** 8095 * t4_alloc_raw_mac_filt - Adds a mac entry in mps tcam 8096 * @adap: the adapter 8097 * @viid: the VI id 8098 * @mac: the MAC address 8099 * @mask: the mask 8100 * @idx: index at which to add this entry 8101 * @port_id: the port index 8102 * @lookup_type: MAC address for inner (1) or outer (0) header 8103 * @sleep_ok: call is allowed to sleep 8104 * 8105 * Adds the mac entry at the specified index using raw mac interface. 8106 * 8107 * Returns a negative error number or the allocated index for this mac. 8108 */ 8109 int t4_alloc_raw_mac_filt(struct adapter *adap, unsigned int viid, 8110 const u8 *addr, const u8 *mask, unsigned int idx, 8111 u8 lookup_type, u8 port_id, bool sleep_ok) 8112 { 8113 int ret = 0; 8114 struct fw_vi_mac_cmd c; 8115 struct fw_vi_mac_raw *p = &c.u.raw; 8116 u32 val; 8117 8118 memset(&c, 0, sizeof(c)); 8119 c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_MAC_CMD) | 8120 F_FW_CMD_REQUEST | F_FW_CMD_WRITE | 8121 V_FW_VI_MAC_CMD_VIID(viid)); 8122 val = V_FW_CMD_LEN16(1) | 8123 V_FW_VI_MAC_CMD_ENTRY_TYPE(FW_VI_MAC_TYPE_RAW); 8124 c.freemacs_to_len16 = cpu_to_be32(val); 8125 8126 /* Specify that this is an inner mac address */ 8127 p->raw_idx_pkd = cpu_to_be32(V_FW_VI_MAC_CMD_RAW_IDX(idx)); 8128 8129 /* Lookup Type. Outer header: 0, Inner header: 1 */ 8130 p->data0_pkd = cpu_to_be32(V_DATALKPTYPE(lookup_type) | 8131 V_DATAPORTNUM(port_id)); 8132 /* Lookup mask and port mask */ 8133 p->data0m_pkd = cpu_to_be64(V_DATALKPTYPE(M_DATALKPTYPE) | 8134 V_DATAPORTNUM(M_DATAPORTNUM)); 8135 8136 /* Copy the address and the mask */ 8137 memcpy((u8 *)&p->data1[0] + 2, addr, ETHER_ADDR_LEN); 8138 memcpy((u8 *)&p->data1m[0] + 2, mask, ETHER_ADDR_LEN); 8139 8140 ret = t4_wr_mbox_meat(adap, adap->mbox, &c, sizeof(c), &c, sleep_ok); 8141 if (ret == 0) { 8142 ret = G_FW_VI_MAC_CMD_RAW_IDX(be32_to_cpu(p->raw_idx_pkd)); 8143 if (ret != idx) 8144 ret = -ENOMEM; 8145 } 8146 8147 return ret; 8148 } 8149 8150 /** 8151 * t4_alloc_mac_filt - allocates exact-match filters for MAC addresses 8152 * @adap: the adapter 8153 * @mbox: mailbox to use for the FW command 8154 * @viid: the VI id 8155 * @free: if true any existing filters for this VI id are first removed 8156 * @naddr: the number of MAC addresses to allocate filters for (up to 7) 8157 * @addr: the MAC address(es) 8158 * @idx: where to store the index of each allocated filter 8159 * @hash: pointer to hash address filter bitmap 8160 * @sleep_ok: call is allowed to sleep 8161 * 8162 * Allocates an exact-match filter for each of the supplied addresses and 8163 * sets it to the corresponding address. If @idx is not %NULL it should 8164 * have at least @naddr entries, each of which will be set to the index of 8165 * the filter allocated for the corresponding MAC address. If a filter 8166 * could not be allocated for an address its index is set to 0xffff. 8167 * If @hash is not %NULL addresses that fail to allocate an exact filter 8168 * are hashed and update the hash filter bitmap pointed at by @hash. 8169 * 8170 * Returns a negative error number or the number of filters allocated. 8171 */ 8172 int t4_alloc_mac_filt(struct adapter *adap, unsigned int mbox, 8173 unsigned int viid, bool free, unsigned int naddr, 8174 const u8 **addr, u16 *idx, u64 *hash, bool sleep_ok) 8175 { 8176 int offset, ret = 0; 8177 struct fw_vi_mac_cmd c; 8178 unsigned int nfilters = 0; 8179 unsigned int max_naddr = adap->chip_params->mps_tcam_size; 8180 unsigned int rem = naddr; 8181 8182 if (naddr > max_naddr) 8183 return -EINVAL; 8184 8185 for (offset = 0; offset < naddr ; /**/) { 8186 unsigned int fw_naddr = (rem < ARRAY_SIZE(c.u.exact) 8187 ? rem 8188 : ARRAY_SIZE(c.u.exact)); 8189 size_t len16 = DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd, 8190 u.exact[fw_naddr]), 16); 8191 struct fw_vi_mac_exact *p; 8192 int i; 8193 8194 memset(&c, 0, sizeof(c)); 8195 c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_MAC_CMD) | 8196 F_FW_CMD_REQUEST | 8197 F_FW_CMD_WRITE | 8198 V_FW_CMD_EXEC(free) | 8199 V_FW_VI_MAC_CMD_VIID(viid)); 8200 c.freemacs_to_len16 = cpu_to_be32(V_FW_VI_MAC_CMD_FREEMACS(free) | 8201 V_FW_CMD_LEN16(len16)); 8202 8203 for (i = 0, p = c.u.exact; i < fw_naddr; i++, p++) { 8204 p->valid_to_idx = 8205 cpu_to_be16(F_FW_VI_MAC_CMD_VALID | 8206 V_FW_VI_MAC_CMD_IDX(FW_VI_MAC_ADD_MAC)); 8207 memcpy(p->macaddr, addr[offset+i], sizeof(p->macaddr)); 8208 } 8209 8210 /* 8211 * It's okay if we run out of space in our MAC address arena. 8212 * Some of the addresses we submit may get stored so we need 8213 * to run through the reply to see what the results were ... 8214 */ 8215 ret = t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), &c, sleep_ok); 8216 if (ret && ret != -FW_ENOMEM) 8217 break; 8218 8219 for (i = 0, p = c.u.exact; i < fw_naddr; i++, p++) { 8220 u16 index = G_FW_VI_MAC_CMD_IDX( 8221 be16_to_cpu(p->valid_to_idx)); 8222 8223 if (idx) 8224 idx[offset+i] = (index >= max_naddr 8225 ? 0xffff 8226 : index); 8227 if (index < max_naddr) 8228 nfilters++; 8229 else if (hash) 8230 *hash |= (1ULL << hash_mac_addr(addr[offset+i])); 8231 } 8232 8233 free = false; 8234 offset += fw_naddr; 8235 rem -= fw_naddr; 8236 } 8237 8238 if (ret == 0 || ret == -FW_ENOMEM) 8239 ret = nfilters; 8240 return ret; 8241 } 8242 8243 /** 8244 * t4_free_encap_mac_filt - frees MPS entry at given index 8245 * @adap: the adapter 8246 * @viid: the VI id 8247 * @idx: index of MPS entry to be freed 8248 * @sleep_ok: call is allowed to sleep 8249 * 8250 * Frees the MPS entry at supplied index 8251 * 8252 * Returns a negative error number or zero on success 8253 */ 8254 int t4_free_encap_mac_filt(struct adapter *adap, unsigned int viid, 8255 int idx, bool sleep_ok) 8256 { 8257 struct fw_vi_mac_exact *p; 8258 struct fw_vi_mac_cmd c; 8259 u8 addr[] = {0,0,0,0,0,0}; 8260 int ret = 0; 8261 u32 exact; 8262 8263 memset(&c, 0, sizeof(c)); 8264 c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_MAC_CMD) | 8265 F_FW_CMD_REQUEST | 8266 F_FW_CMD_WRITE | 8267 V_FW_CMD_EXEC(0) | 8268 V_FW_VI_MAC_CMD_VIID(viid)); 8269 exact = V_FW_VI_MAC_CMD_ENTRY_TYPE(FW_VI_MAC_TYPE_EXACTMAC); 8270 c.freemacs_to_len16 = cpu_to_be32(V_FW_VI_MAC_CMD_FREEMACS(0) | 8271 exact | 8272 V_FW_CMD_LEN16(1)); 8273 p = c.u.exact; 8274 p->valid_to_idx = cpu_to_be16(F_FW_VI_MAC_CMD_VALID | 8275 V_FW_VI_MAC_CMD_IDX(idx)); 8276 memcpy(p->macaddr, addr, sizeof(p->macaddr)); 8277 8278 ret = t4_wr_mbox_meat(adap, adap->mbox, &c, sizeof(c), &c, sleep_ok); 8279 return ret; 8280 } 8281 8282 /** 8283 * t4_free_raw_mac_filt - Frees a raw mac entry in mps tcam 8284 * @adap: the adapter 8285 * @viid: the VI id 8286 * @addr: the MAC address 8287 * @mask: the mask 8288 * @idx: index of the entry in mps tcam 8289 * @lookup_type: MAC address for inner (1) or outer (0) header 8290 * @port_id: the port index 8291 * @sleep_ok: call is allowed to sleep 8292 * 8293 * Removes the mac entry at the specified index using raw mac interface. 8294 * 8295 * Returns a negative error number on failure. 8296 */ 8297 int t4_free_raw_mac_filt(struct adapter *adap, unsigned int viid, 8298 const u8 *addr, const u8 *mask, unsigned int idx, 8299 u8 lookup_type, u8 port_id, bool sleep_ok) 8300 { 8301 struct fw_vi_mac_cmd c; 8302 struct fw_vi_mac_raw *p = &c.u.raw; 8303 u32 raw; 8304 8305 memset(&c, 0, sizeof(c)); 8306 c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_MAC_CMD) | 8307 F_FW_CMD_REQUEST | F_FW_CMD_WRITE | 8308 V_FW_CMD_EXEC(0) | 8309 V_FW_VI_MAC_CMD_VIID(viid)); 8310 raw = V_FW_VI_MAC_CMD_ENTRY_TYPE(FW_VI_MAC_TYPE_RAW); 8311 c.freemacs_to_len16 = cpu_to_be32(V_FW_VI_MAC_CMD_FREEMACS(0) | 8312 raw | 8313 V_FW_CMD_LEN16(1)); 8314 8315 p->raw_idx_pkd = cpu_to_be32(V_FW_VI_MAC_CMD_RAW_IDX(idx) | 8316 FW_VI_MAC_ID_BASED_FREE); 8317 8318 /* Lookup Type. Outer header: 0, Inner header: 1 */ 8319 p->data0_pkd = cpu_to_be32(V_DATALKPTYPE(lookup_type) | 8320 V_DATAPORTNUM(port_id)); 8321 /* Lookup mask and port mask */ 8322 p->data0m_pkd = cpu_to_be64(V_DATALKPTYPE(M_DATALKPTYPE) | 8323 V_DATAPORTNUM(M_DATAPORTNUM)); 8324 8325 /* Copy the address and the mask */ 8326 memcpy((u8 *)&p->data1[0] + 2, addr, ETHER_ADDR_LEN); 8327 memcpy((u8 *)&p->data1m[0] + 2, mask, ETHER_ADDR_LEN); 8328 8329 return t4_wr_mbox_meat(adap, adap->mbox, &c, sizeof(c), &c, sleep_ok); 8330 } 8331 8332 /** 8333 * t4_free_mac_filt - frees exact-match filters of given MAC addresses 8334 * @adap: the adapter 8335 * @mbox: mailbox to use for the FW command 8336 * @viid: the VI id 8337 * @naddr: the number of MAC addresses to allocate filters for (up to 7) 8338 * @addr: the MAC address(es) 8339 * @sleep_ok: call is allowed to sleep 8340 * 8341 * Frees the exact-match filter for each of the supplied addresses 8342 * 8343 * Returns a negative error number or the number of filters freed. 8344 */ 8345 int t4_free_mac_filt(struct adapter *adap, unsigned int mbox, 8346 unsigned int viid, unsigned int naddr, 8347 const u8 **addr, bool sleep_ok) 8348 { 8349 int offset, ret = 0; 8350 struct fw_vi_mac_cmd c; 8351 unsigned int nfilters = 0; 8352 unsigned int max_naddr = adap->chip_params->mps_tcam_size; 8353 unsigned int rem = naddr; 8354 8355 if (naddr > max_naddr) 8356 return -EINVAL; 8357 8358 for (offset = 0; offset < (int)naddr ; /**/) { 8359 unsigned int fw_naddr = (rem < ARRAY_SIZE(c.u.exact) 8360 ? rem 8361 : ARRAY_SIZE(c.u.exact)); 8362 size_t len16 = DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd, 8363 u.exact[fw_naddr]), 16); 8364 struct fw_vi_mac_exact *p; 8365 int i; 8366 8367 memset(&c, 0, sizeof(c)); 8368 c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_MAC_CMD) | 8369 F_FW_CMD_REQUEST | 8370 F_FW_CMD_WRITE | 8371 V_FW_CMD_EXEC(0) | 8372 V_FW_VI_MAC_CMD_VIID(viid)); 8373 c.freemacs_to_len16 = 8374 cpu_to_be32(V_FW_VI_MAC_CMD_FREEMACS(0) | 8375 V_FW_CMD_LEN16(len16)); 8376 8377 for (i = 0, p = c.u.exact; i < (int)fw_naddr; i++, p++) { 8378 p->valid_to_idx = cpu_to_be16( 8379 F_FW_VI_MAC_CMD_VALID | 8380 V_FW_VI_MAC_CMD_IDX(FW_VI_MAC_MAC_BASED_FREE)); 8381 memcpy(p->macaddr, addr[offset+i], sizeof(p->macaddr)); 8382 } 8383 8384 ret = t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), &c, sleep_ok); 8385 if (ret) 8386 break; 8387 8388 for (i = 0, p = c.u.exact; i < fw_naddr; i++, p++) { 8389 u16 index = G_FW_VI_MAC_CMD_IDX( 8390 be16_to_cpu(p->valid_to_idx)); 8391 8392 if (index < max_naddr) 8393 nfilters++; 8394 } 8395 8396 offset += fw_naddr; 8397 rem -= fw_naddr; 8398 } 8399 8400 if (ret == 0) 8401 ret = nfilters; 8402 return ret; 8403 } 8404 8405 /** 8406 * t4_change_mac - modifies the exact-match filter for a MAC address 8407 * @adap: the adapter 8408 * @mbox: mailbox to use for the FW command 8409 * @viid: the VI id 8410 * @idx: index of existing filter for old value of MAC address, or -1 8411 * @addr: the new MAC address value 8412 * @persist: whether a new MAC allocation should be persistent 8413 * @smt_idx: add MAC to SMT and return its index, or NULL 8414 * 8415 * Modifies an exact-match filter and sets it to the new MAC address if 8416 * @idx >= 0, or adds the MAC address to a new filter if @idx < 0. In the 8417 * latter case the address is added persistently if @persist is %true. 8418 * 8419 * Note that in general it is not possible to modify the value of a given 8420 * filter so the generic way to modify an address filter is to free the one 8421 * being used by the old address value and allocate a new filter for the 8422 * new address value. 8423 * 8424 * Returns a negative error number or the index of the filter with the new 8425 * MAC value. Note that this index may differ from @idx. 8426 */ 8427 int t4_change_mac(struct adapter *adap, unsigned int mbox, unsigned int viid, 8428 int idx, const u8 *addr, bool persist, uint16_t *smt_idx) 8429 { 8430 int ret, mode; 8431 struct fw_vi_mac_cmd c; 8432 struct fw_vi_mac_exact *p = c.u.exact; 8433 unsigned int max_mac_addr = adap->chip_params->mps_tcam_size; 8434 8435 if (idx < 0) /* new allocation */ 8436 idx = persist ? FW_VI_MAC_ADD_PERSIST_MAC : FW_VI_MAC_ADD_MAC; 8437 mode = smt_idx ? FW_VI_MAC_SMT_AND_MPSTCAM : FW_VI_MAC_MPS_TCAM_ENTRY; 8438 8439 memset(&c, 0, sizeof(c)); 8440 c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_MAC_CMD) | 8441 F_FW_CMD_REQUEST | F_FW_CMD_WRITE | 8442 V_FW_VI_MAC_CMD_VIID(viid)); 8443 c.freemacs_to_len16 = cpu_to_be32(V_FW_CMD_LEN16(1)); 8444 p->valid_to_idx = cpu_to_be16(F_FW_VI_MAC_CMD_VALID | 8445 V_FW_VI_MAC_CMD_SMAC_RESULT(mode) | 8446 V_FW_VI_MAC_CMD_IDX(idx)); 8447 memcpy(p->macaddr, addr, sizeof(p->macaddr)); 8448 8449 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); 8450 if (ret == 0) { 8451 ret = G_FW_VI_MAC_CMD_IDX(be16_to_cpu(p->valid_to_idx)); 8452 if (ret >= max_mac_addr) 8453 ret = -ENOMEM; 8454 if (smt_idx) { 8455 if (adap->params.viid_smt_extn_support) 8456 *smt_idx = G_FW_VI_MAC_CMD_SMTID(be32_to_cpu(c.op_to_viid)); 8457 else { 8458 if (chip_id(adap) <= CHELSIO_T5) 8459 *smt_idx = (viid & M_FW_VIID_VIN) << 1; 8460 else 8461 *smt_idx = viid & M_FW_VIID_VIN; 8462 } 8463 } 8464 } 8465 return ret; 8466 } 8467 8468 /** 8469 * t4_set_addr_hash - program the MAC inexact-match hash filter 8470 * @adap: the adapter 8471 * @mbox: mailbox to use for the FW command 8472 * @viid: the VI id 8473 * @ucast: whether the hash filter should also match unicast addresses 8474 * @vec: the value to be written to the hash filter 8475 * @sleep_ok: call is allowed to sleep 8476 * 8477 * Sets the 64-bit inexact-match hash filter for a virtual interface. 8478 */ 8479 int t4_set_addr_hash(struct adapter *adap, unsigned int mbox, unsigned int viid, 8480 bool ucast, u64 vec, bool sleep_ok) 8481 { 8482 struct fw_vi_mac_cmd c; 8483 u32 val; 8484 8485 memset(&c, 0, sizeof(c)); 8486 c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_MAC_CMD) | 8487 F_FW_CMD_REQUEST | F_FW_CMD_WRITE | 8488 V_FW_VI_ENABLE_CMD_VIID(viid)); 8489 val = V_FW_VI_MAC_CMD_ENTRY_TYPE(FW_VI_MAC_TYPE_HASHVEC) | 8490 V_FW_VI_MAC_CMD_HASHUNIEN(ucast) | V_FW_CMD_LEN16(1); 8491 c.freemacs_to_len16 = cpu_to_be32(val); 8492 c.u.hash.hashvec = cpu_to_be64(vec); 8493 return t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), NULL, sleep_ok); 8494 } 8495 8496 /** 8497 * t4_enable_vi_params - enable/disable a virtual interface 8498 * @adap: the adapter 8499 * @mbox: mailbox to use for the FW command 8500 * @viid: the VI id 8501 * @rx_en: 1=enable Rx, 0=disable Rx 8502 * @tx_en: 1=enable Tx, 0=disable Tx 8503 * @dcb_en: 1=enable delivery of Data Center Bridging messages. 8504 * 8505 * Enables/disables a virtual interface. Note that setting DCB Enable 8506 * only makes sense when enabling a Virtual Interface ... 8507 */ 8508 int t4_enable_vi_params(struct adapter *adap, unsigned int mbox, 8509 unsigned int viid, bool rx_en, bool tx_en, bool dcb_en) 8510 { 8511 struct fw_vi_enable_cmd c; 8512 8513 memset(&c, 0, sizeof(c)); 8514 c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_ENABLE_CMD) | 8515 F_FW_CMD_REQUEST | F_FW_CMD_EXEC | 8516 V_FW_VI_ENABLE_CMD_VIID(viid)); 8517 c.ien_to_len16 = cpu_to_be32(V_FW_VI_ENABLE_CMD_IEN(rx_en) | 8518 V_FW_VI_ENABLE_CMD_EEN(tx_en) | 8519 V_FW_VI_ENABLE_CMD_DCB_INFO(dcb_en) | 8520 FW_LEN16(c)); 8521 return t4_wr_mbox_ns(adap, mbox, &c, sizeof(c), NULL); 8522 } 8523 8524 /** 8525 * t4_enable_vi - enable/disable a virtual interface 8526 * @adap: the adapter 8527 * @mbox: mailbox to use for the FW command 8528 * @viid: the VI id 8529 * @rx_en: 1=enable Rx, 0=disable Rx 8530 * @tx_en: 1=enable Tx, 0=disable Tx 8531 * 8532 * Enables/disables a virtual interface. Note that setting DCB Enable 8533 * only makes sense when enabling a Virtual Interface ... 8534 */ 8535 int t4_enable_vi(struct adapter *adap, unsigned int mbox, unsigned int viid, 8536 bool rx_en, bool tx_en) 8537 { 8538 return t4_enable_vi_params(adap, mbox, viid, rx_en, tx_en, 0); 8539 } 8540 8541 /** 8542 * t4_identify_port - identify a VI's port by blinking its LED 8543 * @adap: the adapter 8544 * @mbox: mailbox to use for the FW command 8545 * @viid: the VI id 8546 * @nblinks: how many times to blink LED at 2.5 Hz 8547 * 8548 * Identifies a VI's port by blinking its LED. 8549 */ 8550 int t4_identify_port(struct adapter *adap, unsigned int mbox, unsigned int viid, 8551 unsigned int nblinks) 8552 { 8553 struct fw_vi_enable_cmd c; 8554 8555 memset(&c, 0, sizeof(c)); 8556 c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_ENABLE_CMD) | 8557 F_FW_CMD_REQUEST | F_FW_CMD_EXEC | 8558 V_FW_VI_ENABLE_CMD_VIID(viid)); 8559 c.ien_to_len16 = cpu_to_be32(F_FW_VI_ENABLE_CMD_LED | FW_LEN16(c)); 8560 c.blinkdur = cpu_to_be16(nblinks); 8561 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); 8562 } 8563 8564 /** 8565 * t4_iq_stop - stop an ingress queue and its FLs 8566 * @adap: the adapter 8567 * @mbox: mailbox to use for the FW command 8568 * @pf: the PF owning the queues 8569 * @vf: the VF owning the queues 8570 * @iqtype: the ingress queue type (FW_IQ_TYPE_FL_INT_CAP, etc.) 8571 * @iqid: ingress queue id 8572 * @fl0id: FL0 queue id or 0xffff if no attached FL0 8573 * @fl1id: FL1 queue id or 0xffff if no attached FL1 8574 * 8575 * Stops an ingress queue and its associated FLs, if any. This causes 8576 * any current or future data/messages destined for these queues to be 8577 * tossed. 8578 */ 8579 int t4_iq_stop(struct adapter *adap, unsigned int mbox, unsigned int pf, 8580 unsigned int vf, unsigned int iqtype, unsigned int iqid, 8581 unsigned int fl0id, unsigned int fl1id) 8582 { 8583 struct fw_iq_cmd c; 8584 8585 memset(&c, 0, sizeof(c)); 8586 c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_IQ_CMD) | F_FW_CMD_REQUEST | 8587 F_FW_CMD_EXEC | V_FW_IQ_CMD_PFN(pf) | 8588 V_FW_IQ_CMD_VFN(vf)); 8589 c.alloc_to_len16 = cpu_to_be32(F_FW_IQ_CMD_IQSTOP | FW_LEN16(c)); 8590 c.type_to_iqandstindex = cpu_to_be32(V_FW_IQ_CMD_TYPE(iqtype)); 8591 c.iqid = cpu_to_be16(iqid); 8592 c.fl0id = cpu_to_be16(fl0id); 8593 c.fl1id = cpu_to_be16(fl1id); 8594 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); 8595 } 8596 8597 /** 8598 * t4_iq_free - free an ingress queue and its FLs 8599 * @adap: the adapter 8600 * @mbox: mailbox to use for the FW command 8601 * @pf: the PF owning the queues 8602 * @vf: the VF owning the queues 8603 * @iqtype: the ingress queue type (FW_IQ_TYPE_FL_INT_CAP, etc.) 8604 * @iqid: ingress queue id 8605 * @fl0id: FL0 queue id or 0xffff if no attached FL0 8606 * @fl1id: FL1 queue id or 0xffff if no attached FL1 8607 * 8608 * Frees an ingress queue and its associated FLs, if any. 8609 */ 8610 int t4_iq_free(struct adapter *adap, unsigned int mbox, unsigned int pf, 8611 unsigned int vf, unsigned int iqtype, unsigned int iqid, 8612 unsigned int fl0id, unsigned int fl1id) 8613 { 8614 struct fw_iq_cmd c; 8615 8616 memset(&c, 0, sizeof(c)); 8617 c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_IQ_CMD) | F_FW_CMD_REQUEST | 8618 F_FW_CMD_EXEC | V_FW_IQ_CMD_PFN(pf) | 8619 V_FW_IQ_CMD_VFN(vf)); 8620 c.alloc_to_len16 = cpu_to_be32(F_FW_IQ_CMD_FREE | FW_LEN16(c)); 8621 c.type_to_iqandstindex = cpu_to_be32(V_FW_IQ_CMD_TYPE(iqtype)); 8622 c.iqid = cpu_to_be16(iqid); 8623 c.fl0id = cpu_to_be16(fl0id); 8624 c.fl1id = cpu_to_be16(fl1id); 8625 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); 8626 } 8627 8628 /** 8629 * t4_eth_eq_stop - stop an Ethernet egress queue 8630 * @adap: the adapter 8631 * @mbox: mailbox to use for the FW command 8632 * @pf: the PF owning the queues 8633 * @vf: the VF owning the queues 8634 * @eqid: egress queue id 8635 * 8636 * Stops an Ethernet egress queue. The queue can be reinitialized or 8637 * freed but is not otherwise functional after this call. 8638 */ 8639 int t4_eth_eq_stop(struct adapter *adap, unsigned int mbox, unsigned int pf, 8640 unsigned int vf, unsigned int eqid) 8641 { 8642 struct fw_eq_eth_cmd c; 8643 8644 memset(&c, 0, sizeof(c)); 8645 c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_EQ_ETH_CMD) | 8646 F_FW_CMD_REQUEST | F_FW_CMD_EXEC | 8647 V_FW_EQ_ETH_CMD_PFN(pf) | 8648 V_FW_EQ_ETH_CMD_VFN(vf)); 8649 c.alloc_to_len16 = cpu_to_be32(F_FW_EQ_ETH_CMD_EQSTOP | FW_LEN16(c)); 8650 c.eqid_pkd = cpu_to_be32(V_FW_EQ_ETH_CMD_EQID(eqid)); 8651 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); 8652 } 8653 8654 /** 8655 * t4_eth_eq_free - free an Ethernet egress queue 8656 * @adap: the adapter 8657 * @mbox: mailbox to use for the FW command 8658 * @pf: the PF owning the queue 8659 * @vf: the VF owning the queue 8660 * @eqid: egress queue id 8661 * 8662 * Frees an Ethernet egress queue. 8663 */ 8664 int t4_eth_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf, 8665 unsigned int vf, unsigned int eqid) 8666 { 8667 struct fw_eq_eth_cmd c; 8668 8669 memset(&c, 0, sizeof(c)); 8670 c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_EQ_ETH_CMD) | 8671 F_FW_CMD_REQUEST | F_FW_CMD_EXEC | 8672 V_FW_EQ_ETH_CMD_PFN(pf) | 8673 V_FW_EQ_ETH_CMD_VFN(vf)); 8674 c.alloc_to_len16 = cpu_to_be32(F_FW_EQ_ETH_CMD_FREE | FW_LEN16(c)); 8675 c.eqid_pkd = cpu_to_be32(V_FW_EQ_ETH_CMD_EQID(eqid)); 8676 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); 8677 } 8678 8679 /** 8680 * t4_ctrl_eq_free - free a control egress queue 8681 * @adap: the adapter 8682 * @mbox: mailbox to use for the FW command 8683 * @pf: the PF owning the queue 8684 * @vf: the VF owning the queue 8685 * @eqid: egress queue id 8686 * 8687 * Frees a control egress queue. 8688 */ 8689 int t4_ctrl_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf, 8690 unsigned int vf, unsigned int eqid) 8691 { 8692 struct fw_eq_ctrl_cmd c; 8693 8694 memset(&c, 0, sizeof(c)); 8695 c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_EQ_CTRL_CMD) | 8696 F_FW_CMD_REQUEST | F_FW_CMD_EXEC | 8697 V_FW_EQ_CTRL_CMD_PFN(pf) | 8698 V_FW_EQ_CTRL_CMD_VFN(vf)); 8699 c.alloc_to_len16 = cpu_to_be32(F_FW_EQ_CTRL_CMD_FREE | FW_LEN16(c)); 8700 c.cmpliqid_eqid = cpu_to_be32(V_FW_EQ_CTRL_CMD_EQID(eqid)); 8701 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); 8702 } 8703 8704 /** 8705 * t4_ofld_eq_free - free an offload egress queue 8706 * @adap: the adapter 8707 * @mbox: mailbox to use for the FW command 8708 * @pf: the PF owning the queue 8709 * @vf: the VF owning the queue 8710 * @eqid: egress queue id 8711 * 8712 * Frees a control egress queue. 8713 */ 8714 int t4_ofld_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf, 8715 unsigned int vf, unsigned int eqid) 8716 { 8717 struct fw_eq_ofld_cmd c; 8718 8719 memset(&c, 0, sizeof(c)); 8720 c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_EQ_OFLD_CMD) | 8721 F_FW_CMD_REQUEST | F_FW_CMD_EXEC | 8722 V_FW_EQ_OFLD_CMD_PFN(pf) | 8723 V_FW_EQ_OFLD_CMD_VFN(vf)); 8724 c.alloc_to_len16 = cpu_to_be32(F_FW_EQ_OFLD_CMD_FREE | FW_LEN16(c)); 8725 c.eqid_pkd = cpu_to_be32(V_FW_EQ_OFLD_CMD_EQID(eqid)); 8726 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); 8727 } 8728 8729 /** 8730 * t4_link_down_rc_str - return a string for a Link Down Reason Code 8731 * @link_down_rc: Link Down Reason Code 8732 * 8733 * Returns a string representation of the Link Down Reason Code. 8734 */ 8735 const char *t4_link_down_rc_str(unsigned char link_down_rc) 8736 { 8737 static const char *reason[] = { 8738 "Link Down", 8739 "Remote Fault", 8740 "Auto-negotiation Failure", 8741 "Reserved3", 8742 "Insufficient Airflow", 8743 "Unable To Determine Reason", 8744 "No RX Signal Detected", 8745 "Reserved7", 8746 }; 8747 8748 if (link_down_rc >= ARRAY_SIZE(reason)) 8749 return "Bad Reason Code"; 8750 8751 return reason[link_down_rc]; 8752 } 8753 8754 /* 8755 * Return the highest speed set in the port capabilities, in Mb/s. 8756 */ 8757 unsigned int fwcap_to_speed(uint32_t caps) 8758 { 8759 #define TEST_SPEED_RETURN(__caps_speed, __speed) \ 8760 do { \ 8761 if (caps & FW_PORT_CAP32_SPEED_##__caps_speed) \ 8762 return __speed; \ 8763 } while (0) 8764 8765 TEST_SPEED_RETURN(400G, 400000); 8766 TEST_SPEED_RETURN(200G, 200000); 8767 TEST_SPEED_RETURN(100G, 100000); 8768 TEST_SPEED_RETURN(50G, 50000); 8769 TEST_SPEED_RETURN(40G, 40000); 8770 TEST_SPEED_RETURN(25G, 25000); 8771 TEST_SPEED_RETURN(10G, 10000); 8772 TEST_SPEED_RETURN(1G, 1000); 8773 TEST_SPEED_RETURN(100M, 100); 8774 8775 #undef TEST_SPEED_RETURN 8776 8777 return 0; 8778 } 8779 8780 /* 8781 * Return the port capabilities bit for the given speed, which is in Mb/s. 8782 */ 8783 uint32_t speed_to_fwcap(unsigned int speed) 8784 { 8785 #define TEST_SPEED_RETURN(__caps_speed, __speed) \ 8786 do { \ 8787 if (speed == __speed) \ 8788 return FW_PORT_CAP32_SPEED_##__caps_speed; \ 8789 } while (0) 8790 8791 TEST_SPEED_RETURN(400G, 400000); 8792 TEST_SPEED_RETURN(200G, 200000); 8793 TEST_SPEED_RETURN(100G, 100000); 8794 TEST_SPEED_RETURN(50G, 50000); 8795 TEST_SPEED_RETURN(40G, 40000); 8796 TEST_SPEED_RETURN(25G, 25000); 8797 TEST_SPEED_RETURN(10G, 10000); 8798 TEST_SPEED_RETURN(1G, 1000); 8799 TEST_SPEED_RETURN(100M, 100); 8800 8801 #undef TEST_SPEED_RETURN 8802 8803 return 0; 8804 } 8805 8806 /* 8807 * Return the port capabilities bit for the highest speed in the capabilities. 8808 */ 8809 uint32_t fwcap_top_speed(uint32_t caps) 8810 { 8811 #define TEST_SPEED_RETURN(__caps_speed) \ 8812 do { \ 8813 if (caps & FW_PORT_CAP32_SPEED_##__caps_speed) \ 8814 return FW_PORT_CAP32_SPEED_##__caps_speed; \ 8815 } while (0) 8816 8817 TEST_SPEED_RETURN(400G); 8818 TEST_SPEED_RETURN(200G); 8819 TEST_SPEED_RETURN(100G); 8820 TEST_SPEED_RETURN(50G); 8821 TEST_SPEED_RETURN(40G); 8822 TEST_SPEED_RETURN(25G); 8823 TEST_SPEED_RETURN(10G); 8824 TEST_SPEED_RETURN(1G); 8825 TEST_SPEED_RETURN(100M); 8826 8827 #undef TEST_SPEED_RETURN 8828 8829 return 0; 8830 } 8831 8832 /** 8833 * lstatus_to_fwcap - translate old lstatus to 32-bit Port Capabilities 8834 * @lstatus: old FW_PORT_ACTION_GET_PORT_INFO lstatus value 8835 * 8836 * Translates old FW_PORT_ACTION_GET_PORT_INFO lstatus field into new 8837 * 32-bit Port Capabilities value. 8838 */ 8839 static uint32_t lstatus_to_fwcap(u32 lstatus) 8840 { 8841 uint32_t linkattr = 0; 8842 8843 /* 8844 * Unfortunately the format of the Link Status in the old 8845 * 16-bit Port Information message isn't the same as the 8846 * 16-bit Port Capabilities bitfield used everywhere else ... 8847 */ 8848 if (lstatus & F_FW_PORT_CMD_RXPAUSE) 8849 linkattr |= FW_PORT_CAP32_FC_RX; 8850 if (lstatus & F_FW_PORT_CMD_TXPAUSE) 8851 linkattr |= FW_PORT_CAP32_FC_TX; 8852 if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_100M)) 8853 linkattr |= FW_PORT_CAP32_SPEED_100M; 8854 if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_1G)) 8855 linkattr |= FW_PORT_CAP32_SPEED_1G; 8856 if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_10G)) 8857 linkattr |= FW_PORT_CAP32_SPEED_10G; 8858 if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_25G)) 8859 linkattr |= FW_PORT_CAP32_SPEED_25G; 8860 if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_40G)) 8861 linkattr |= FW_PORT_CAP32_SPEED_40G; 8862 if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_100G)) 8863 linkattr |= FW_PORT_CAP32_SPEED_100G; 8864 8865 return linkattr; 8866 } 8867 8868 /* 8869 * Updates all fields owned by the common code in port_info and link_config 8870 * based on information provided by the firmware. Does not touch any 8871 * requested_* field. 8872 */ 8873 static void handle_port_info(struct port_info *pi, const struct fw_port_cmd *p, 8874 enum fw_port_action action, bool *mod_changed, bool *link_changed) 8875 { 8876 struct link_config old_lc, *lc = &pi->link_cfg; 8877 unsigned char fc; 8878 u32 stat, linkattr; 8879 int old_ptype, old_mtype; 8880 8881 old_ptype = pi->port_type; 8882 old_mtype = pi->mod_type; 8883 old_lc = *lc; 8884 if (action == FW_PORT_ACTION_GET_PORT_INFO) { 8885 stat = be32_to_cpu(p->u.info.lstatus_to_modtype); 8886 8887 pi->port_type = G_FW_PORT_CMD_PTYPE(stat); 8888 pi->mod_type = G_FW_PORT_CMD_MODTYPE(stat); 8889 pi->mdio_addr = stat & F_FW_PORT_CMD_MDIOCAP ? 8890 G_FW_PORT_CMD_MDIOADDR(stat) : -1; 8891 8892 lc->pcaps = fwcaps16_to_caps32(be16_to_cpu(p->u.info.pcap)); 8893 lc->acaps = fwcaps16_to_caps32(be16_to_cpu(p->u.info.acap)); 8894 lc->lpacaps = fwcaps16_to_caps32(be16_to_cpu(p->u.info.lpacap)); 8895 lc->link_ok = (stat & F_FW_PORT_CMD_LSTATUS) != 0; 8896 lc->link_down_rc = G_FW_PORT_CMD_LINKDNRC(stat); 8897 8898 linkattr = lstatus_to_fwcap(stat); 8899 } else if (action == FW_PORT_ACTION_GET_PORT_INFO32) { 8900 stat = be32_to_cpu(p->u.info32.lstatus32_to_cbllen32); 8901 8902 pi->port_type = G_FW_PORT_CMD_PORTTYPE32(stat); 8903 pi->mod_type = G_FW_PORT_CMD_MODTYPE32(stat); 8904 pi->mdio_addr = stat & F_FW_PORT_CMD_MDIOCAP32 ? 8905 G_FW_PORT_CMD_MDIOADDR32(stat) : -1; 8906 8907 lc->pcaps = be32_to_cpu(p->u.info32.pcaps32); 8908 lc->acaps = be32_to_cpu(p->u.info32.acaps32); 8909 lc->lpacaps = be32_to_cpu(p->u.info32.lpacaps32); 8910 lc->link_ok = (stat & F_FW_PORT_CMD_LSTATUS32) != 0; 8911 lc->link_down_rc = G_FW_PORT_CMD_LINKDNRC32(stat); 8912 8913 linkattr = be32_to_cpu(p->u.info32.linkattr32); 8914 } else { 8915 CH_ERR(pi->adapter, "bad port_info action 0x%x\n", action); 8916 return; 8917 } 8918 8919 lc->speed = fwcap_to_speed(linkattr); 8920 lc->fec = fwcap_to_fec(linkattr, true); 8921 8922 fc = 0; 8923 if (linkattr & FW_PORT_CAP32_FC_RX) 8924 fc |= PAUSE_RX; 8925 if (linkattr & FW_PORT_CAP32_FC_TX) 8926 fc |= PAUSE_TX; 8927 lc->fc = fc; 8928 8929 if (mod_changed != NULL) 8930 *mod_changed = false; 8931 if (link_changed != NULL) 8932 *link_changed = false; 8933 if (old_ptype != pi->port_type || old_mtype != pi->mod_type || 8934 old_lc.pcaps != lc->pcaps) { 8935 if (pi->mod_type != FW_PORT_MOD_TYPE_NONE) 8936 lc->fec_hint = fwcap_to_fec(lc->acaps, true); 8937 if (mod_changed != NULL) 8938 *mod_changed = true; 8939 } 8940 if (old_lc.link_ok != lc->link_ok || old_lc.speed != lc->speed || 8941 old_lc.fec != lc->fec || old_lc.fc != lc->fc) { 8942 if (link_changed != NULL) 8943 *link_changed = true; 8944 } 8945 } 8946 8947 /** 8948 * t4_update_port_info - retrieve and update port information if changed 8949 * @pi: the port_info 8950 * 8951 * We issue a Get Port Information Command to the Firmware and, if 8952 * successful, we check to see if anything is different from what we 8953 * last recorded and update things accordingly. 8954 */ 8955 int t4_update_port_info(struct port_info *pi) 8956 { 8957 struct adapter *sc = pi->adapter; 8958 struct fw_port_cmd cmd; 8959 enum fw_port_action action; 8960 int ret; 8961 8962 memset(&cmd, 0, sizeof(cmd)); 8963 cmd.op_to_portid = cpu_to_be32(V_FW_CMD_OP(FW_PORT_CMD) | 8964 F_FW_CMD_REQUEST | F_FW_CMD_READ | 8965 V_FW_PORT_CMD_PORTID(pi->tx_chan)); 8966 action = sc->params.port_caps32 ? FW_PORT_ACTION_GET_PORT_INFO32 : 8967 FW_PORT_ACTION_GET_PORT_INFO; 8968 cmd.action_to_len16 = cpu_to_be32(V_FW_PORT_CMD_ACTION(action) | 8969 FW_LEN16(cmd)); 8970 ret = t4_wr_mbox_ns(sc, sc->mbox, &cmd, sizeof(cmd), &cmd); 8971 if (ret) 8972 return ret; 8973 8974 handle_port_info(pi, &cmd, action, NULL, NULL); 8975 return 0; 8976 } 8977 8978 /** 8979 * t4_handle_fw_rpl - process a FW reply message 8980 * @adap: the adapter 8981 * @rpl: start of the FW message 8982 * 8983 * Processes a FW message, such as link state change messages. 8984 */ 8985 int t4_handle_fw_rpl(struct adapter *adap, const __be64 *rpl) 8986 { 8987 u8 opcode = *(const u8 *)rpl; 8988 const struct fw_port_cmd *p = (const void *)rpl; 8989 enum fw_port_action action = 8990 G_FW_PORT_CMD_ACTION(be32_to_cpu(p->action_to_len16)); 8991 bool mod_changed, link_changed; 8992 8993 if (opcode == FW_PORT_CMD && 8994 (action == FW_PORT_ACTION_GET_PORT_INFO || 8995 action == FW_PORT_ACTION_GET_PORT_INFO32)) { 8996 /* link/module state change message */ 8997 int i; 8998 int chan = G_FW_PORT_CMD_PORTID(be32_to_cpu(p->op_to_portid)); 8999 struct port_info *pi = NULL; 9000 9001 for_each_port(adap, i) { 9002 pi = adap2pinfo(adap, i); 9003 if (pi->tx_chan == chan) 9004 break; 9005 } 9006 9007 PORT_LOCK(pi); 9008 handle_port_info(pi, p, action, &mod_changed, &link_changed); 9009 PORT_UNLOCK(pi); 9010 if (mod_changed) 9011 t4_os_portmod_changed(pi); 9012 if (link_changed) { 9013 PORT_LOCK(pi); 9014 t4_os_link_changed(pi); 9015 PORT_UNLOCK(pi); 9016 } 9017 } else { 9018 CH_WARN_RATELIMIT(adap, "Unknown firmware reply %d\n", opcode); 9019 return -EINVAL; 9020 } 9021 return 0; 9022 } 9023 9024 /** 9025 * get_pci_mode - determine a card's PCI mode 9026 * @adapter: the adapter 9027 * @p: where to store the PCI settings 9028 * 9029 * Determines a card's PCI mode and associated parameters, such as speed 9030 * and width. 9031 */ 9032 static void get_pci_mode(struct adapter *adapter, 9033 struct pci_params *p) 9034 { 9035 u16 val; 9036 u32 pcie_cap; 9037 9038 pcie_cap = t4_os_find_pci_capability(adapter, PCI_CAP_ID_EXP); 9039 if (pcie_cap) { 9040 t4_os_pci_read_cfg2(adapter, pcie_cap + PCI_EXP_LNKSTA, &val); 9041 p->speed = val & PCI_EXP_LNKSTA_CLS; 9042 p->width = (val & PCI_EXP_LNKSTA_NLW) >> 4; 9043 } 9044 } 9045 9046 struct flash_desc { 9047 u32 vendor_and_model_id; 9048 u32 size_mb; 9049 }; 9050 9051 int t4_get_flash_params(struct adapter *adapter) 9052 { 9053 /* 9054 * Table for non-standard supported Flash parts. Note, all Flash 9055 * parts must have 64KB sectors. 9056 */ 9057 static struct flash_desc supported_flash[] = { 9058 { 0x00150201, 4 << 20 }, /* Spansion 4MB S25FL032P */ 9059 }; 9060 9061 int ret; 9062 u32 flashid = 0; 9063 unsigned int part, manufacturer; 9064 unsigned int density, size = 0; 9065 9066 9067 /* 9068 * Issue a Read ID Command to the Flash part. We decode supported 9069 * Flash parts and their sizes from this. There's a newer Query 9070 * Command which can retrieve detailed geometry information but many 9071 * Flash parts don't support it. 9072 */ 9073 ret = sf1_write(adapter, 1, 1, 0, SF_RD_ID); 9074 if (!ret) 9075 ret = sf1_read(adapter, 3, 0, 1, &flashid); 9076 t4_write_reg(adapter, A_SF_OP, 0); /* unlock SF */ 9077 if (ret < 0) 9078 return ret; 9079 9080 /* 9081 * Check to see if it's one of our non-standard supported Flash parts. 9082 */ 9083 for (part = 0; part < ARRAY_SIZE(supported_flash); part++) 9084 if (supported_flash[part].vendor_and_model_id == flashid) { 9085 adapter->params.sf_size = 9086 supported_flash[part].size_mb; 9087 adapter->params.sf_nsec = 9088 adapter->params.sf_size / SF_SEC_SIZE; 9089 goto found; 9090 } 9091 9092 /* 9093 * Decode Flash part size. The code below looks repetative with 9094 * common encodings, but that's not guaranteed in the JEDEC 9095 * specification for the Read JADEC ID command. The only thing that 9096 * we're guaranteed by the JADEC specification is where the 9097 * Manufacturer ID is in the returned result. After that each 9098 * Manufacturer ~could~ encode things completely differently. 9099 * Note, all Flash parts must have 64KB sectors. 9100 */ 9101 manufacturer = flashid & 0xff; 9102 switch (manufacturer) { 9103 case 0x20: /* Micron/Numonix */ 9104 /* 9105 * This Density -> Size decoding table is taken from Micron 9106 * Data Sheets. 9107 */ 9108 density = (flashid >> 16) & 0xff; 9109 switch (density) { 9110 case 0x14: size = 1 << 20; break; /* 1MB */ 9111 case 0x15: size = 1 << 21; break; /* 2MB */ 9112 case 0x16: size = 1 << 22; break; /* 4MB */ 9113 case 0x17: size = 1 << 23; break; /* 8MB */ 9114 case 0x18: size = 1 << 24; break; /* 16MB */ 9115 case 0x19: size = 1 << 25; break; /* 32MB */ 9116 case 0x20: size = 1 << 26; break; /* 64MB */ 9117 case 0x21: size = 1 << 27; break; /* 128MB */ 9118 case 0x22: size = 1 << 28; break; /* 256MB */ 9119 } 9120 break; 9121 9122 case 0x9d: /* ISSI -- Integrated Silicon Solution, Inc. */ 9123 /* 9124 * This Density -> Size decoding table is taken from ISSI 9125 * Data Sheets. 9126 */ 9127 density = (flashid >> 16) & 0xff; 9128 switch (density) { 9129 case 0x16: size = 1 << 25; break; /* 32MB */ 9130 case 0x17: size = 1 << 26; break; /* 64MB */ 9131 } 9132 break; 9133 9134 case 0xc2: /* Macronix */ 9135 /* 9136 * This Density -> Size decoding table is taken from Macronix 9137 * Data Sheets. 9138 */ 9139 density = (flashid >> 16) & 0xff; 9140 switch (density) { 9141 case 0x17: size = 1 << 23; break; /* 8MB */ 9142 case 0x18: size = 1 << 24; break; /* 16MB */ 9143 } 9144 break; 9145 9146 case 0xef: /* Winbond */ 9147 /* 9148 * This Density -> Size decoding table is taken from Winbond 9149 * Data Sheets. 9150 */ 9151 density = (flashid >> 16) & 0xff; 9152 switch (density) { 9153 case 0x17: size = 1 << 23; break; /* 8MB */ 9154 case 0x18: size = 1 << 24; break; /* 16MB */ 9155 } 9156 break; 9157 } 9158 9159 /* If we didn't recognize the FLASH part, that's no real issue: the 9160 * Hardware/Software contract says that Hardware will _*ALWAYS*_ 9161 * use a FLASH part which is at least 4MB in size and has 64KB 9162 * sectors. The unrecognized FLASH part is likely to be much larger 9163 * than 4MB, but that's all we really need. 9164 */ 9165 if (size == 0) { 9166 CH_WARN(adapter, "Unknown Flash Part, ID = %#x, assuming 4MB\n", flashid); 9167 size = 1 << 22; 9168 } 9169 9170 /* 9171 * Store decoded Flash size and fall through into vetting code. 9172 */ 9173 adapter->params.sf_size = size; 9174 adapter->params.sf_nsec = size / SF_SEC_SIZE; 9175 9176 found: 9177 /* 9178 * We should ~probably~ reject adapters with FLASHes which are too 9179 * small but we have some legacy FPGAs with small FLASHes that we'd 9180 * still like to use. So instead we emit a scary message ... 9181 */ 9182 if (adapter->params.sf_size < FLASH_MIN_SIZE) 9183 CH_WARN(adapter, "WARNING: Flash Part ID %#x, size %#x < %#x\n", 9184 flashid, adapter->params.sf_size, FLASH_MIN_SIZE); 9185 9186 return 0; 9187 } 9188 9189 static void set_pcie_completion_timeout(struct adapter *adapter, 9190 u8 range) 9191 { 9192 u16 val; 9193 u32 pcie_cap; 9194 9195 pcie_cap = t4_os_find_pci_capability(adapter, PCI_CAP_ID_EXP); 9196 if (pcie_cap) { 9197 t4_os_pci_read_cfg2(adapter, pcie_cap + PCI_EXP_DEVCTL2, &val); 9198 val &= 0xfff0; 9199 val |= range ; 9200 t4_os_pci_write_cfg2(adapter, pcie_cap + PCI_EXP_DEVCTL2, val); 9201 } 9202 } 9203 9204 const struct chip_params *t4_get_chip_params(int chipid) 9205 { 9206 static const struct chip_params chip_params[] = { 9207 { 9208 /* T4 */ 9209 .nchan = NCHAN, 9210 .pm_stats_cnt = PM_NSTATS, 9211 .cng_ch_bits_log = 2, 9212 .nsched_cls = 15, 9213 .cim_num_obq = CIM_NUM_OBQ, 9214 .filter_opt_len = FILTER_OPT_LEN, 9215 .mps_rplc_size = 128, 9216 .vfcount = 128, 9217 .sge_fl_db = F_DBPRIO, 9218 .mps_tcam_size = NUM_MPS_CLS_SRAM_L_INSTANCES, 9219 .rss_nentries = RSS_NENTRIES, 9220 .cim_la_size = CIMLA_SIZE, 9221 }, 9222 { 9223 /* T5 */ 9224 .nchan = NCHAN, 9225 .pm_stats_cnt = PM_NSTATS, 9226 .cng_ch_bits_log = 2, 9227 .nsched_cls = 16, 9228 .cim_num_obq = CIM_NUM_OBQ_T5, 9229 .filter_opt_len = T5_FILTER_OPT_LEN, 9230 .mps_rplc_size = 128, 9231 .vfcount = 128, 9232 .sge_fl_db = F_DBPRIO | F_DBTYPE, 9233 .mps_tcam_size = NUM_MPS_T5_CLS_SRAM_L_INSTANCES, 9234 .rss_nentries = RSS_NENTRIES, 9235 .cim_la_size = CIMLA_SIZE, 9236 }, 9237 { 9238 /* T6 */ 9239 .nchan = T6_NCHAN, 9240 .pm_stats_cnt = T6_PM_NSTATS, 9241 .cng_ch_bits_log = 3, 9242 .nsched_cls = 16, 9243 .cim_num_obq = CIM_NUM_OBQ_T5, 9244 .filter_opt_len = T5_FILTER_OPT_LEN, 9245 .mps_rplc_size = 256, 9246 .vfcount = 256, 9247 .sge_fl_db = 0, 9248 .mps_tcam_size = NUM_MPS_T5_CLS_SRAM_L_INSTANCES, 9249 .rss_nentries = T6_RSS_NENTRIES, 9250 .cim_la_size = CIMLA_SIZE_T6, 9251 }, 9252 }; 9253 9254 chipid -= CHELSIO_T4; 9255 if (chipid < 0 || chipid >= ARRAY_SIZE(chip_params)) 9256 return NULL; 9257 9258 return &chip_params[chipid]; 9259 } 9260 9261 /** 9262 * t4_prep_adapter - prepare SW and HW for operation 9263 * @adapter: the adapter 9264 * @buf: temporary space of at least VPD_LEN size provided by the caller. 9265 * 9266 * Initialize adapter SW state for the various HW modules, set initial 9267 * values for some adapter tunables, take PHYs out of reset, and 9268 * initialize the MDIO interface. 9269 */ 9270 int t4_prep_adapter(struct adapter *adapter, u32 *buf) 9271 { 9272 int ret; 9273 uint16_t device_id; 9274 uint32_t pl_rev; 9275 9276 get_pci_mode(adapter, &adapter->params.pci); 9277 9278 pl_rev = t4_read_reg(adapter, A_PL_REV); 9279 adapter->params.chipid = G_CHIPID(pl_rev); 9280 adapter->params.rev = G_REV(pl_rev); 9281 if (adapter->params.chipid == 0) { 9282 /* T4 did not have chipid in PL_REV (T5 onwards do) */ 9283 adapter->params.chipid = CHELSIO_T4; 9284 9285 /* T4A1 chip is not supported */ 9286 if (adapter->params.rev == 1) { 9287 CH_ALERT(adapter, "T4 rev 1 chip is not supported.\n"); 9288 return -EINVAL; 9289 } 9290 } 9291 9292 adapter->chip_params = t4_get_chip_params(chip_id(adapter)); 9293 if (adapter->chip_params == NULL) 9294 return -EINVAL; 9295 9296 adapter->params.pci.vpd_cap_addr = 9297 t4_os_find_pci_capability(adapter, PCI_CAP_ID_VPD); 9298 9299 ret = t4_get_flash_params(adapter); 9300 if (ret < 0) 9301 return ret; 9302 9303 /* Cards with real ASICs have the chipid in the PCIe device id */ 9304 t4_os_pci_read_cfg2(adapter, PCI_DEVICE_ID, &device_id); 9305 if (device_id >> 12 == chip_id(adapter)) 9306 adapter->params.cim_la_size = adapter->chip_params->cim_la_size; 9307 else { 9308 /* FPGA */ 9309 adapter->params.fpga = 1; 9310 adapter->params.cim_la_size = 2 * adapter->chip_params->cim_la_size; 9311 } 9312 9313 ret = get_vpd_params(adapter, &adapter->params.vpd, device_id, buf); 9314 if (ret < 0) 9315 return ret; 9316 9317 init_cong_ctrl(adapter->params.a_wnd, adapter->params.b_wnd); 9318 9319 /* 9320 * Default port and clock for debugging in case we can't reach FW. 9321 */ 9322 adapter->params.nports = 1; 9323 adapter->params.portvec = 1; 9324 adapter->params.vpd.cclk = 50000; 9325 9326 /* Set pci completion timeout value to 4 seconds. */ 9327 set_pcie_completion_timeout(adapter, 0xd); 9328 return 0; 9329 } 9330 9331 /** 9332 * t4_shutdown_adapter - shut down adapter, host & wire 9333 * @adapter: the adapter 9334 * 9335 * Perform an emergency shutdown of the adapter and stop it from 9336 * continuing any further communication on the ports or DMA to the 9337 * host. This is typically used when the adapter and/or firmware 9338 * have crashed and we want to prevent any further accidental 9339 * communication with the rest of the world. This will also force 9340 * the port Link Status to go down -- if register writes work -- 9341 * which should help our peers figure out that we're down. 9342 */ 9343 int t4_shutdown_adapter(struct adapter *adapter) 9344 { 9345 int port; 9346 const bool bt = adapter->bt_map != 0; 9347 9348 t4_intr_disable(adapter); 9349 if (bt) 9350 t4_write_reg(adapter, A_DBG_GPIO_EN, 0xffff0000); 9351 for_each_port(adapter, port) { 9352 u32 a_port_cfg = is_t4(adapter) ? 9353 t4_port_reg(adapter, port, A_XGMAC_PORT_CFG) : 9354 t4_port_reg(adapter, port, A_MAC_PORT_CFG); 9355 9356 t4_write_reg(adapter, a_port_cfg, 9357 t4_read_reg(adapter, a_port_cfg) 9358 & ~V_SIGNAL_DET(1)); 9359 if (!bt) { 9360 u32 hss_cfg0 = is_t4(adapter) ? 9361 t4_port_reg(adapter, port, A_XGMAC_PORT_HSS_CFG0) : 9362 t4_port_reg(adapter, port, A_MAC_PORT_HSS_CFG0); 9363 t4_set_reg_field(adapter, hss_cfg0, F_HSSPDWNPLLB | 9364 F_HSSPDWNPLLA | F_HSSPLLBYPB | F_HSSPLLBYPA, 9365 F_HSSPDWNPLLB | F_HSSPDWNPLLA | F_HSSPLLBYPB | 9366 F_HSSPLLBYPA); 9367 } 9368 } 9369 t4_set_reg_field(adapter, A_SGE_CONTROL, F_GLOBALENABLE, 0); 9370 9371 return 0; 9372 } 9373 9374 /** 9375 * t4_bar2_sge_qregs - return BAR2 SGE Queue register information 9376 * @adapter: the adapter 9377 * @qid: the Queue ID 9378 * @qtype: the Ingress or Egress type for @qid 9379 * @user: true if this request is for a user mode queue 9380 * @pbar2_qoffset: BAR2 Queue Offset 9381 * @pbar2_qid: BAR2 Queue ID or 0 for Queue ID inferred SGE Queues 9382 * 9383 * Returns the BAR2 SGE Queue Registers information associated with the 9384 * indicated Absolute Queue ID. These are passed back in return value 9385 * pointers. @qtype should be T4_BAR2_QTYPE_EGRESS for Egress Queue 9386 * and T4_BAR2_QTYPE_INGRESS for Ingress Queues. 9387 * 9388 * This may return an error which indicates that BAR2 SGE Queue 9389 * registers aren't available. If an error is not returned, then the 9390 * following values are returned: 9391 * 9392 * *@pbar2_qoffset: the BAR2 Offset of the @qid Registers 9393 * *@pbar2_qid: the BAR2 SGE Queue ID or 0 of @qid 9394 * 9395 * If the returned BAR2 Queue ID is 0, then BAR2 SGE registers which 9396 * require the "Inferred Queue ID" ability may be used. E.g. the 9397 * Write Combining Doorbell Buffer. If the BAR2 Queue ID is not 0, 9398 * then these "Inferred Queue ID" register may not be used. 9399 */ 9400 int t4_bar2_sge_qregs(struct adapter *adapter, 9401 unsigned int qid, 9402 enum t4_bar2_qtype qtype, 9403 int user, 9404 u64 *pbar2_qoffset, 9405 unsigned int *pbar2_qid) 9406 { 9407 unsigned int page_shift, page_size, qpp_shift, qpp_mask; 9408 u64 bar2_page_offset, bar2_qoffset; 9409 unsigned int bar2_qid, bar2_qid_offset, bar2_qinferred; 9410 9411 /* T4 doesn't support BAR2 SGE Queue registers for kernel 9412 * mode queues. 9413 */ 9414 if (!user && is_t4(adapter)) 9415 return -EINVAL; 9416 9417 /* Get our SGE Page Size parameters. 9418 */ 9419 page_shift = adapter->params.sge.page_shift; 9420 page_size = 1 << page_shift; 9421 9422 /* Get the right Queues per Page parameters for our Queue. 9423 */ 9424 qpp_shift = (qtype == T4_BAR2_QTYPE_EGRESS 9425 ? adapter->params.sge.eq_s_qpp 9426 : adapter->params.sge.iq_s_qpp); 9427 qpp_mask = (1 << qpp_shift) - 1; 9428 9429 /* Calculate the basics of the BAR2 SGE Queue register area: 9430 * o The BAR2 page the Queue registers will be in. 9431 * o The BAR2 Queue ID. 9432 * o The BAR2 Queue ID Offset into the BAR2 page. 9433 */ 9434 bar2_page_offset = ((u64)(qid >> qpp_shift) << page_shift); 9435 bar2_qid = qid & qpp_mask; 9436 bar2_qid_offset = bar2_qid * SGE_UDB_SIZE; 9437 9438 /* If the BAR2 Queue ID Offset is less than the Page Size, then the 9439 * hardware will infer the Absolute Queue ID simply from the writes to 9440 * the BAR2 Queue ID Offset within the BAR2 Page (and we need to use a 9441 * BAR2 Queue ID of 0 for those writes). Otherwise, we'll simply 9442 * write to the first BAR2 SGE Queue Area within the BAR2 Page with 9443 * the BAR2 Queue ID and the hardware will infer the Absolute Queue ID 9444 * from the BAR2 Page and BAR2 Queue ID. 9445 * 9446 * One important censequence of this is that some BAR2 SGE registers 9447 * have a "Queue ID" field and we can write the BAR2 SGE Queue ID 9448 * there. But other registers synthesize the SGE Queue ID purely 9449 * from the writes to the registers -- the Write Combined Doorbell 9450 * Buffer is a good example. These BAR2 SGE Registers are only 9451 * available for those BAR2 SGE Register areas where the SGE Absolute 9452 * Queue ID can be inferred from simple writes. 9453 */ 9454 bar2_qoffset = bar2_page_offset; 9455 bar2_qinferred = (bar2_qid_offset < page_size); 9456 if (bar2_qinferred) { 9457 bar2_qoffset += bar2_qid_offset; 9458 bar2_qid = 0; 9459 } 9460 9461 *pbar2_qoffset = bar2_qoffset; 9462 *pbar2_qid = bar2_qid; 9463 return 0; 9464 } 9465 9466 /** 9467 * t4_init_devlog_params - initialize adapter->params.devlog 9468 * @adap: the adapter 9469 * @fw_attach: whether we can talk to the firmware 9470 * 9471 * Initialize various fields of the adapter's Firmware Device Log 9472 * Parameters structure. 9473 */ 9474 int t4_init_devlog_params(struct adapter *adap, int fw_attach) 9475 { 9476 struct devlog_params *dparams = &adap->params.devlog; 9477 u32 pf_dparams; 9478 unsigned int devlog_meminfo; 9479 struct fw_devlog_cmd devlog_cmd; 9480 int ret; 9481 9482 /* If we're dealing with newer firmware, the Device Log Paramerters 9483 * are stored in a designated register which allows us to access the 9484 * Device Log even if we can't talk to the firmware. 9485 */ 9486 pf_dparams = 9487 t4_read_reg(adap, PCIE_FW_REG(A_PCIE_FW_PF, PCIE_FW_PF_DEVLOG)); 9488 if (pf_dparams) { 9489 unsigned int nentries, nentries128; 9490 9491 dparams->memtype = G_PCIE_FW_PF_DEVLOG_MEMTYPE(pf_dparams); 9492 dparams->start = G_PCIE_FW_PF_DEVLOG_ADDR16(pf_dparams) << 4; 9493 9494 nentries128 = G_PCIE_FW_PF_DEVLOG_NENTRIES128(pf_dparams); 9495 nentries = (nentries128 + 1) * 128; 9496 dparams->size = nentries * sizeof(struct fw_devlog_e); 9497 9498 return 0; 9499 } 9500 9501 /* 9502 * For any failing returns ... 9503 */ 9504 memset(dparams, 0, sizeof *dparams); 9505 9506 /* 9507 * If we can't talk to the firmware, there's really nothing we can do 9508 * at this point. 9509 */ 9510 if (!fw_attach) 9511 return -ENXIO; 9512 9513 /* Otherwise, ask the firmware for it's Device Log Parameters. 9514 */ 9515 memset(&devlog_cmd, 0, sizeof devlog_cmd); 9516 devlog_cmd.op_to_write = cpu_to_be32(V_FW_CMD_OP(FW_DEVLOG_CMD) | 9517 F_FW_CMD_REQUEST | F_FW_CMD_READ); 9518 devlog_cmd.retval_len16 = cpu_to_be32(FW_LEN16(devlog_cmd)); 9519 ret = t4_wr_mbox(adap, adap->mbox, &devlog_cmd, sizeof(devlog_cmd), 9520 &devlog_cmd); 9521 if (ret) 9522 return ret; 9523 9524 devlog_meminfo = 9525 be32_to_cpu(devlog_cmd.memtype_devlog_memaddr16_devlog); 9526 dparams->memtype = G_FW_DEVLOG_CMD_MEMTYPE_DEVLOG(devlog_meminfo); 9527 dparams->start = G_FW_DEVLOG_CMD_MEMADDR16_DEVLOG(devlog_meminfo) << 4; 9528 dparams->size = be32_to_cpu(devlog_cmd.memsize_devlog); 9529 9530 return 0; 9531 } 9532 9533 /** 9534 * t4_init_sge_params - initialize adap->params.sge 9535 * @adapter: the adapter 9536 * 9537 * Initialize various fields of the adapter's SGE Parameters structure. 9538 */ 9539 int t4_init_sge_params(struct adapter *adapter) 9540 { 9541 u32 r; 9542 struct sge_params *sp = &adapter->params.sge; 9543 unsigned i, tscale = 1; 9544 9545 r = t4_read_reg(adapter, A_SGE_INGRESS_RX_THRESHOLD); 9546 sp->counter_val[0] = G_THRESHOLD_0(r); 9547 sp->counter_val[1] = G_THRESHOLD_1(r); 9548 sp->counter_val[2] = G_THRESHOLD_2(r); 9549 sp->counter_val[3] = G_THRESHOLD_3(r); 9550 9551 if (chip_id(adapter) >= CHELSIO_T6) { 9552 r = t4_read_reg(adapter, A_SGE_ITP_CONTROL); 9553 tscale = G_TSCALE(r); 9554 if (tscale == 0) 9555 tscale = 1; 9556 else 9557 tscale += 2; 9558 } 9559 9560 r = t4_read_reg(adapter, A_SGE_TIMER_VALUE_0_AND_1); 9561 sp->timer_val[0] = core_ticks_to_us(adapter, G_TIMERVALUE0(r)) * tscale; 9562 sp->timer_val[1] = core_ticks_to_us(adapter, G_TIMERVALUE1(r)) * tscale; 9563 r = t4_read_reg(adapter, A_SGE_TIMER_VALUE_2_AND_3); 9564 sp->timer_val[2] = core_ticks_to_us(adapter, G_TIMERVALUE2(r)) * tscale; 9565 sp->timer_val[3] = core_ticks_to_us(adapter, G_TIMERVALUE3(r)) * tscale; 9566 r = t4_read_reg(adapter, A_SGE_TIMER_VALUE_4_AND_5); 9567 sp->timer_val[4] = core_ticks_to_us(adapter, G_TIMERVALUE4(r)) * tscale; 9568 sp->timer_val[5] = core_ticks_to_us(adapter, G_TIMERVALUE5(r)) * tscale; 9569 9570 r = t4_read_reg(adapter, A_SGE_CONM_CTRL); 9571 sp->fl_starve_threshold = G_EGRTHRESHOLD(r) * 2 + 1; 9572 if (is_t4(adapter)) 9573 sp->fl_starve_threshold2 = sp->fl_starve_threshold; 9574 else if (is_t5(adapter)) 9575 sp->fl_starve_threshold2 = G_EGRTHRESHOLDPACKING(r) * 2 + 1; 9576 else 9577 sp->fl_starve_threshold2 = G_T6_EGRTHRESHOLDPACKING(r) * 2 + 1; 9578 9579 /* egress queues: log2 of # of doorbells per BAR2 page */ 9580 r = t4_read_reg(adapter, A_SGE_EGRESS_QUEUES_PER_PAGE_PF); 9581 r >>= S_QUEUESPERPAGEPF0 + 9582 (S_QUEUESPERPAGEPF1 - S_QUEUESPERPAGEPF0) * adapter->pf; 9583 sp->eq_s_qpp = r & M_QUEUESPERPAGEPF0; 9584 9585 /* ingress queues: log2 of # of doorbells per BAR2 page */ 9586 r = t4_read_reg(adapter, A_SGE_INGRESS_QUEUES_PER_PAGE_PF); 9587 r >>= S_QUEUESPERPAGEPF0 + 9588 (S_QUEUESPERPAGEPF1 - S_QUEUESPERPAGEPF0) * adapter->pf; 9589 sp->iq_s_qpp = r & M_QUEUESPERPAGEPF0; 9590 9591 r = t4_read_reg(adapter, A_SGE_HOST_PAGE_SIZE); 9592 r >>= S_HOSTPAGESIZEPF0 + 9593 (S_HOSTPAGESIZEPF1 - S_HOSTPAGESIZEPF0) * adapter->pf; 9594 sp->page_shift = (r & M_HOSTPAGESIZEPF0) + 10; 9595 9596 r = t4_read_reg(adapter, A_SGE_CONTROL); 9597 sp->sge_control = r; 9598 sp->spg_len = r & F_EGRSTATUSPAGESIZE ? 128 : 64; 9599 sp->fl_pktshift = G_PKTSHIFT(r); 9600 if (chip_id(adapter) <= CHELSIO_T5) { 9601 sp->pad_boundary = 1 << (G_INGPADBOUNDARY(r) + 9602 X_INGPADBOUNDARY_SHIFT); 9603 } else { 9604 sp->pad_boundary = 1 << (G_INGPADBOUNDARY(r) + 9605 X_T6_INGPADBOUNDARY_SHIFT); 9606 } 9607 if (is_t4(adapter)) 9608 sp->pack_boundary = sp->pad_boundary; 9609 else { 9610 r = t4_read_reg(adapter, A_SGE_CONTROL2); 9611 if (G_INGPACKBOUNDARY(r) == 0) 9612 sp->pack_boundary = 16; 9613 else 9614 sp->pack_boundary = 1 << (G_INGPACKBOUNDARY(r) + 5); 9615 } 9616 for (i = 0; i < SGE_FLBUF_SIZES; i++) 9617 sp->sge_fl_buffer_size[i] = t4_read_reg(adapter, 9618 A_SGE_FL_BUFFER_SIZE0 + (4 * i)); 9619 9620 return 0; 9621 } 9622 9623 /* Convert the LE's hardware hash mask to a shorter filter mask. */ 9624 static inline uint16_t 9625 hashmask_to_filtermask(uint64_t hashmask, uint16_t filter_mode) 9626 { 9627 static const uint8_t width[] = {1, 3, 17, 17, 8, 8, 16, 9, 3, 1}; 9628 int i; 9629 uint16_t filter_mask; 9630 uint64_t mask; /* field mask */ 9631 9632 filter_mask = 0; 9633 for (i = S_FCOE; i <= S_FRAGMENTATION; i++) { 9634 if ((filter_mode & (1 << i)) == 0) 9635 continue; 9636 mask = (1 << width[i]) - 1; 9637 if ((hashmask & mask) == mask) 9638 filter_mask |= 1 << i; 9639 hashmask >>= width[i]; 9640 } 9641 9642 return (filter_mask); 9643 } 9644 9645 /* 9646 * Read and cache the adapter's compressed filter mode and ingress config. 9647 */ 9648 static void 9649 read_filter_mode_and_ingress_config(struct adapter *adap) 9650 { 9651 int rc; 9652 uint32_t v, param[2], val[2]; 9653 struct tp_params *tpp = &adap->params.tp; 9654 uint64_t hash_mask; 9655 9656 param[0] = V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | 9657 V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_FILTER) | 9658 V_FW_PARAMS_PARAM_Y(FW_PARAM_DEV_FILTER_MODE_MASK); 9659 param[1] = V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | 9660 V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_FILTER) | 9661 V_FW_PARAMS_PARAM_Y(FW_PARAM_DEV_FILTER_VNIC_MODE); 9662 rc = -t4_query_params(adap, adap->mbox, adap->pf, 0, 2, param, val); 9663 if (rc == 0) { 9664 tpp->filter_mode = G_FW_PARAMS_PARAM_FILTER_MODE(val[0]); 9665 tpp->filter_mask = G_FW_PARAMS_PARAM_FILTER_MASK(val[0]); 9666 tpp->vnic_mode = val[1]; 9667 } else { 9668 /* 9669 * Old firmware. Read filter mode/mask and ingress config 9670 * straight from the hardware. 9671 */ 9672 t4_tp_pio_read(adap, &v, 1, A_TP_VLAN_PRI_MAP, true); 9673 tpp->filter_mode = v & 0xffff; 9674 9675 hash_mask = 0; 9676 if (chip_id(adap) > CHELSIO_T4) { 9677 v = t4_read_reg(adap, LE_HASH_MASK_GEN_IPV4T5(3)); 9678 hash_mask = v; 9679 v = t4_read_reg(adap, LE_HASH_MASK_GEN_IPV4T5(4)); 9680 hash_mask |= (u64)v << 32; 9681 } 9682 tpp->filter_mask = hashmask_to_filtermask(hash_mask, 9683 tpp->filter_mode); 9684 9685 t4_tp_pio_read(adap, &v, 1, A_TP_INGRESS_CONFIG, true); 9686 if (v & F_VNIC) 9687 tpp->vnic_mode = FW_VNIC_MODE_PF_VF; 9688 else 9689 tpp->vnic_mode = FW_VNIC_MODE_OUTER_VLAN; 9690 } 9691 9692 /* 9693 * Now that we have TP_VLAN_PRI_MAP cached, we can calculate the field 9694 * shift positions of several elements of the Compressed Filter Tuple 9695 * for this adapter which we need frequently ... 9696 */ 9697 tpp->fcoe_shift = t4_filter_field_shift(adap, F_FCOE); 9698 tpp->port_shift = t4_filter_field_shift(adap, F_PORT); 9699 tpp->vnic_shift = t4_filter_field_shift(adap, F_VNIC_ID); 9700 tpp->vlan_shift = t4_filter_field_shift(adap, F_VLAN); 9701 tpp->tos_shift = t4_filter_field_shift(adap, F_TOS); 9702 tpp->protocol_shift = t4_filter_field_shift(adap, F_PROTOCOL); 9703 tpp->ethertype_shift = t4_filter_field_shift(adap, F_ETHERTYPE); 9704 tpp->macmatch_shift = t4_filter_field_shift(adap, F_MACMATCH); 9705 tpp->matchtype_shift = t4_filter_field_shift(adap, F_MPSHITTYPE); 9706 tpp->frag_shift = t4_filter_field_shift(adap, F_FRAGMENTATION); 9707 } 9708 9709 /** 9710 * t4_init_tp_params - initialize adap->params.tp 9711 * @adap: the adapter 9712 * 9713 * Initialize various fields of the adapter's TP Parameters structure. 9714 */ 9715 int t4_init_tp_params(struct adapter *adap) 9716 { 9717 u32 tx_len, rx_len, r, v; 9718 struct tp_params *tpp = &adap->params.tp; 9719 9720 v = t4_read_reg(adap, A_TP_TIMER_RESOLUTION); 9721 tpp->tre = G_TIMERRESOLUTION(v); 9722 tpp->dack_re = G_DELAYEDACKRESOLUTION(v); 9723 9724 read_filter_mode_and_ingress_config(adap); 9725 9726 if (chip_id(adap) > CHELSIO_T5) { 9727 v = t4_read_reg(adap, A_TP_OUT_CONFIG); 9728 tpp->rx_pkt_encap = v & F_CRXPKTENC; 9729 } else 9730 tpp->rx_pkt_encap = false; 9731 9732 rx_len = t4_read_reg(adap, A_TP_PMM_RX_PAGE_SIZE); 9733 tx_len = t4_read_reg(adap, A_TP_PMM_TX_PAGE_SIZE); 9734 9735 r = t4_read_reg(adap, A_TP_PARA_REG2); 9736 rx_len = min(rx_len, G_MAXRXDATA(r)); 9737 tx_len = min(tx_len, G_MAXRXDATA(r)); 9738 9739 r = t4_read_reg(adap, A_TP_PARA_REG7); 9740 v = min(G_PMMAXXFERLEN0(r), G_PMMAXXFERLEN1(r)); 9741 rx_len = min(rx_len, v); 9742 tx_len = min(tx_len, v); 9743 9744 tpp->max_tx_pdu = tx_len; 9745 tpp->max_rx_pdu = rx_len; 9746 9747 return 0; 9748 } 9749 9750 /** 9751 * t4_filter_field_shift - calculate filter field shift 9752 * @adap: the adapter 9753 * @filter_sel: the desired field (from TP_VLAN_PRI_MAP bits) 9754 * 9755 * Return the shift position of a filter field within the Compressed 9756 * Filter Tuple. The filter field is specified via its selection bit 9757 * within TP_VLAN_PRI_MAL (filter mode). E.g. F_VLAN. 9758 */ 9759 int t4_filter_field_shift(const struct adapter *adap, int filter_sel) 9760 { 9761 const unsigned int filter_mode = adap->params.tp.filter_mode; 9762 unsigned int sel; 9763 int field_shift; 9764 9765 if ((filter_mode & filter_sel) == 0) 9766 return -1; 9767 9768 for (sel = 1, field_shift = 0; sel < filter_sel; sel <<= 1) { 9769 switch (filter_mode & sel) { 9770 case F_FCOE: 9771 field_shift += W_FT_FCOE; 9772 break; 9773 case F_PORT: 9774 field_shift += W_FT_PORT; 9775 break; 9776 case F_VNIC_ID: 9777 field_shift += W_FT_VNIC_ID; 9778 break; 9779 case F_VLAN: 9780 field_shift += W_FT_VLAN; 9781 break; 9782 case F_TOS: 9783 field_shift += W_FT_TOS; 9784 break; 9785 case F_PROTOCOL: 9786 field_shift += W_FT_PROTOCOL; 9787 break; 9788 case F_ETHERTYPE: 9789 field_shift += W_FT_ETHERTYPE; 9790 break; 9791 case F_MACMATCH: 9792 field_shift += W_FT_MACMATCH; 9793 break; 9794 case F_MPSHITTYPE: 9795 field_shift += W_FT_MPSHITTYPE; 9796 break; 9797 case F_FRAGMENTATION: 9798 field_shift += W_FT_FRAGMENTATION; 9799 break; 9800 } 9801 } 9802 return field_shift; 9803 } 9804 9805 int t4_port_init(struct adapter *adap, int mbox, int pf, int vf, int port_id) 9806 { 9807 u8 addr[6]; 9808 int ret, i, j; 9809 struct port_info *p = adap2pinfo(adap, port_id); 9810 u32 param, val; 9811 struct vi_info *vi = &p->vi[0]; 9812 9813 for (i = 0, j = -1; i <= p->port_id; i++) { 9814 do { 9815 j++; 9816 } while ((adap->params.portvec & (1 << j)) == 0); 9817 } 9818 9819 p->tx_chan = j; 9820 p->mps_bg_map = t4_get_mps_bg_map(adap, j); 9821 p->rx_e_chan_map = t4_get_rx_e_chan_map(adap, j); 9822 p->rx_c_chan = t4_get_rx_c_chan(adap, j); 9823 p->lport = j; 9824 9825 if (!(adap->flags & IS_VF) || 9826 adap->params.vfres.r_caps & FW_CMD_CAP_PORT) { 9827 t4_update_port_info(p); 9828 } 9829 9830 ret = t4_alloc_vi(adap, mbox, j, pf, vf, 1, addr, &vi->rss_size, 9831 &vi->vfvld, &vi->vin); 9832 if (ret < 0) 9833 return ret; 9834 9835 vi->viid = ret; 9836 t4_os_set_hw_addr(p, addr); 9837 9838 param = V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | 9839 V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_RSSINFO) | 9840 V_FW_PARAMS_PARAM_YZ(vi->viid); 9841 ret = t4_query_params(adap, mbox, pf, vf, 1, ¶m, &val); 9842 if (ret) 9843 vi->rss_base = 0xffff; 9844 else { 9845 /* MPASS((val >> 16) == rss_size); */ 9846 vi->rss_base = val & 0xffff; 9847 } 9848 9849 return 0; 9850 } 9851 9852 /** 9853 * t4_read_cimq_cfg - read CIM queue configuration 9854 * @adap: the adapter 9855 * @base: holds the queue base addresses in bytes 9856 * @size: holds the queue sizes in bytes 9857 * @thres: holds the queue full thresholds in bytes 9858 * 9859 * Returns the current configuration of the CIM queues, starting with 9860 * the IBQs, then the OBQs. 9861 */ 9862 void t4_read_cimq_cfg(struct adapter *adap, u16 *base, u16 *size, u16 *thres) 9863 { 9864 unsigned int i, v; 9865 int cim_num_obq = adap->chip_params->cim_num_obq; 9866 9867 for (i = 0; i < CIM_NUM_IBQ; i++) { 9868 t4_write_reg(adap, A_CIM_QUEUE_CONFIG_REF, F_IBQSELECT | 9869 V_QUENUMSELECT(i)); 9870 v = t4_read_reg(adap, A_CIM_QUEUE_CONFIG_CTRL); 9871 /* value is in 256-byte units */ 9872 *base++ = G_CIMQBASE(v) * 256; 9873 *size++ = G_CIMQSIZE(v) * 256; 9874 *thres++ = G_QUEFULLTHRSH(v) * 8; /* 8-byte unit */ 9875 } 9876 for (i = 0; i < cim_num_obq; i++) { 9877 t4_write_reg(adap, A_CIM_QUEUE_CONFIG_REF, F_OBQSELECT | 9878 V_QUENUMSELECT(i)); 9879 v = t4_read_reg(adap, A_CIM_QUEUE_CONFIG_CTRL); 9880 /* value is in 256-byte units */ 9881 *base++ = G_CIMQBASE(v) * 256; 9882 *size++ = G_CIMQSIZE(v) * 256; 9883 } 9884 } 9885 9886 /** 9887 * t4_read_cim_ibq - read the contents of a CIM inbound queue 9888 * @adap: the adapter 9889 * @qid: the queue index 9890 * @data: where to store the queue contents 9891 * @n: capacity of @data in 32-bit words 9892 * 9893 * Reads the contents of the selected CIM queue starting at address 0 up 9894 * to the capacity of @data. @n must be a multiple of 4. Returns < 0 on 9895 * error and the number of 32-bit words actually read on success. 9896 */ 9897 int t4_read_cim_ibq(struct adapter *adap, unsigned int qid, u32 *data, size_t n) 9898 { 9899 int i, err, attempts; 9900 unsigned int addr; 9901 const unsigned int nwords = CIM_IBQ_SIZE * 4; 9902 9903 if (qid > 5 || (n & 3)) 9904 return -EINVAL; 9905 9906 addr = qid * nwords; 9907 if (n > nwords) 9908 n = nwords; 9909 9910 /* It might take 3-10ms before the IBQ debug read access is allowed. 9911 * Wait for 1 Sec with a delay of 1 usec. 9912 */ 9913 attempts = 1000000; 9914 9915 for (i = 0; i < n; i++, addr++) { 9916 t4_write_reg(adap, A_CIM_IBQ_DBG_CFG, V_IBQDBGADDR(addr) | 9917 F_IBQDBGEN); 9918 err = t4_wait_op_done(adap, A_CIM_IBQ_DBG_CFG, F_IBQDBGBUSY, 0, 9919 attempts, 1); 9920 if (err) 9921 return err; 9922 *data++ = t4_read_reg(adap, A_CIM_IBQ_DBG_DATA); 9923 } 9924 t4_write_reg(adap, A_CIM_IBQ_DBG_CFG, 0); 9925 return i; 9926 } 9927 9928 /** 9929 * t4_read_cim_obq - read the contents of a CIM outbound queue 9930 * @adap: the adapter 9931 * @qid: the queue index 9932 * @data: where to store the queue contents 9933 * @n: capacity of @data in 32-bit words 9934 * 9935 * Reads the contents of the selected CIM queue starting at address 0 up 9936 * to the capacity of @data. @n must be a multiple of 4. Returns < 0 on 9937 * error and the number of 32-bit words actually read on success. 9938 */ 9939 int t4_read_cim_obq(struct adapter *adap, unsigned int qid, u32 *data, size_t n) 9940 { 9941 int i, err; 9942 unsigned int addr, v, nwords; 9943 int cim_num_obq = adap->chip_params->cim_num_obq; 9944 9945 if ((qid > (cim_num_obq - 1)) || (n & 3)) 9946 return -EINVAL; 9947 9948 t4_write_reg(adap, A_CIM_QUEUE_CONFIG_REF, F_OBQSELECT | 9949 V_QUENUMSELECT(qid)); 9950 v = t4_read_reg(adap, A_CIM_QUEUE_CONFIG_CTRL); 9951 9952 addr = G_CIMQBASE(v) * 64; /* muliple of 256 -> muliple of 4 */ 9953 nwords = G_CIMQSIZE(v) * 64; /* same */ 9954 if (n > nwords) 9955 n = nwords; 9956 9957 for (i = 0; i < n; i++, addr++) { 9958 t4_write_reg(adap, A_CIM_OBQ_DBG_CFG, V_OBQDBGADDR(addr) | 9959 F_OBQDBGEN); 9960 err = t4_wait_op_done(adap, A_CIM_OBQ_DBG_CFG, F_OBQDBGBUSY, 0, 9961 2, 1); 9962 if (err) 9963 return err; 9964 *data++ = t4_read_reg(adap, A_CIM_OBQ_DBG_DATA); 9965 } 9966 t4_write_reg(adap, A_CIM_OBQ_DBG_CFG, 0); 9967 return i; 9968 } 9969 9970 enum { 9971 CIM_QCTL_BASE = 0, 9972 CIM_CTL_BASE = 0x2000, 9973 CIM_PBT_ADDR_BASE = 0x2800, 9974 CIM_PBT_LRF_BASE = 0x3000, 9975 CIM_PBT_DATA_BASE = 0x3800 9976 }; 9977 9978 /** 9979 * t4_cim_read - read a block from CIM internal address space 9980 * @adap: the adapter 9981 * @addr: the start address within the CIM address space 9982 * @n: number of words to read 9983 * @valp: where to store the result 9984 * 9985 * Reads a block of 4-byte words from the CIM intenal address space. 9986 */ 9987 int t4_cim_read(struct adapter *adap, unsigned int addr, unsigned int n, 9988 unsigned int *valp) 9989 { 9990 int ret = 0; 9991 9992 if (t4_read_reg(adap, A_CIM_HOST_ACC_CTRL) & F_HOSTBUSY) 9993 return -EBUSY; 9994 9995 for ( ; !ret && n--; addr += 4) { 9996 t4_write_reg(adap, A_CIM_HOST_ACC_CTRL, addr); 9997 ret = t4_wait_op_done(adap, A_CIM_HOST_ACC_CTRL, F_HOSTBUSY, 9998 0, 5, 2); 9999 if (!ret) 10000 *valp++ = t4_read_reg(adap, A_CIM_HOST_ACC_DATA); 10001 } 10002 return ret; 10003 } 10004 10005 /** 10006 * t4_cim_write - write a block into CIM internal address space 10007 * @adap: the adapter 10008 * @addr: the start address within the CIM address space 10009 * @n: number of words to write 10010 * @valp: set of values to write 10011 * 10012 * Writes a block of 4-byte words into the CIM intenal address space. 10013 */ 10014 int t4_cim_write(struct adapter *adap, unsigned int addr, unsigned int n, 10015 const unsigned int *valp) 10016 { 10017 int ret = 0; 10018 10019 if (t4_read_reg(adap, A_CIM_HOST_ACC_CTRL) & F_HOSTBUSY) 10020 return -EBUSY; 10021 10022 for ( ; !ret && n--; addr += 4) { 10023 t4_write_reg(adap, A_CIM_HOST_ACC_DATA, *valp++); 10024 t4_write_reg(adap, A_CIM_HOST_ACC_CTRL, addr | F_HOSTWRITE); 10025 ret = t4_wait_op_done(adap, A_CIM_HOST_ACC_CTRL, F_HOSTBUSY, 10026 0, 5, 2); 10027 } 10028 return ret; 10029 } 10030 10031 static int t4_cim_write1(struct adapter *adap, unsigned int addr, 10032 unsigned int val) 10033 { 10034 return t4_cim_write(adap, addr, 1, &val); 10035 } 10036 10037 /** 10038 * t4_cim_ctl_read - read a block from CIM control region 10039 * @adap: the adapter 10040 * @addr: the start address within the CIM control region 10041 * @n: number of words to read 10042 * @valp: where to store the result 10043 * 10044 * Reads a block of 4-byte words from the CIM control region. 10045 */ 10046 int t4_cim_ctl_read(struct adapter *adap, unsigned int addr, unsigned int n, 10047 unsigned int *valp) 10048 { 10049 return t4_cim_read(adap, addr + CIM_CTL_BASE, n, valp); 10050 } 10051 10052 /** 10053 * t4_cim_read_la - read CIM LA capture buffer 10054 * @adap: the adapter 10055 * @la_buf: where to store the LA data 10056 * @wrptr: the HW write pointer within the capture buffer 10057 * 10058 * Reads the contents of the CIM LA buffer with the most recent entry at 10059 * the end of the returned data and with the entry at @wrptr first. 10060 * We try to leave the LA in the running state we find it in. 10061 */ 10062 int t4_cim_read_la(struct adapter *adap, u32 *la_buf, unsigned int *wrptr) 10063 { 10064 int i, ret; 10065 unsigned int cfg, val, idx; 10066 10067 ret = t4_cim_read(adap, A_UP_UP_DBG_LA_CFG, 1, &cfg); 10068 if (ret) 10069 return ret; 10070 10071 if (cfg & F_UPDBGLAEN) { /* LA is running, freeze it */ 10072 ret = t4_cim_write1(adap, A_UP_UP_DBG_LA_CFG, 0); 10073 if (ret) 10074 return ret; 10075 } 10076 10077 ret = t4_cim_read(adap, A_UP_UP_DBG_LA_CFG, 1, &val); 10078 if (ret) 10079 goto restart; 10080 10081 idx = G_UPDBGLAWRPTR(val); 10082 if (wrptr) 10083 *wrptr = idx; 10084 10085 for (i = 0; i < adap->params.cim_la_size; i++) { 10086 ret = t4_cim_write1(adap, A_UP_UP_DBG_LA_CFG, 10087 V_UPDBGLARDPTR(idx) | F_UPDBGLARDEN); 10088 if (ret) 10089 break; 10090 ret = t4_cim_read(adap, A_UP_UP_DBG_LA_CFG, 1, &val); 10091 if (ret) 10092 break; 10093 if (val & F_UPDBGLARDEN) { 10094 ret = -ETIMEDOUT; 10095 break; 10096 } 10097 ret = t4_cim_read(adap, A_UP_UP_DBG_LA_DATA, 1, &la_buf[i]); 10098 if (ret) 10099 break; 10100 10101 /* Bits 0-3 of UpDbgLaRdPtr can be between 0000 to 1001 to 10102 * identify the 32-bit portion of the full 312-bit data 10103 */ 10104 if (is_t6(adap) && (idx & 0xf) >= 9) 10105 idx = (idx & 0xff0) + 0x10; 10106 else 10107 idx++; 10108 /* address can't exceed 0xfff */ 10109 idx &= M_UPDBGLARDPTR; 10110 } 10111 restart: 10112 if (cfg & F_UPDBGLAEN) { 10113 int r = t4_cim_write1(adap, A_UP_UP_DBG_LA_CFG, 10114 cfg & ~F_UPDBGLARDEN); 10115 if (!ret) 10116 ret = r; 10117 } 10118 return ret; 10119 } 10120 10121 /** 10122 * t4_tp_read_la - read TP LA capture buffer 10123 * @adap: the adapter 10124 * @la_buf: where to store the LA data 10125 * @wrptr: the HW write pointer within the capture buffer 10126 * 10127 * Reads the contents of the TP LA buffer with the most recent entry at 10128 * the end of the returned data and with the entry at @wrptr first. 10129 * We leave the LA in the running state we find it in. 10130 */ 10131 void t4_tp_read_la(struct adapter *adap, u64 *la_buf, unsigned int *wrptr) 10132 { 10133 bool last_incomplete; 10134 unsigned int i, cfg, val, idx; 10135 10136 cfg = t4_read_reg(adap, A_TP_DBG_LA_CONFIG) & 0xffff; 10137 if (cfg & F_DBGLAENABLE) /* freeze LA */ 10138 t4_write_reg(adap, A_TP_DBG_LA_CONFIG, 10139 adap->params.tp.la_mask | (cfg ^ F_DBGLAENABLE)); 10140 10141 val = t4_read_reg(adap, A_TP_DBG_LA_CONFIG); 10142 idx = G_DBGLAWPTR(val); 10143 last_incomplete = G_DBGLAMODE(val) >= 2 && (val & F_DBGLAWHLF) == 0; 10144 if (last_incomplete) 10145 idx = (idx + 1) & M_DBGLARPTR; 10146 if (wrptr) 10147 *wrptr = idx; 10148 10149 val &= 0xffff; 10150 val &= ~V_DBGLARPTR(M_DBGLARPTR); 10151 val |= adap->params.tp.la_mask; 10152 10153 for (i = 0; i < TPLA_SIZE; i++) { 10154 t4_write_reg(adap, A_TP_DBG_LA_CONFIG, V_DBGLARPTR(idx) | val); 10155 la_buf[i] = t4_read_reg64(adap, A_TP_DBG_LA_DATAL); 10156 idx = (idx + 1) & M_DBGLARPTR; 10157 } 10158 10159 /* Wipe out last entry if it isn't valid */ 10160 if (last_incomplete) 10161 la_buf[TPLA_SIZE - 1] = ~0ULL; 10162 10163 if (cfg & F_DBGLAENABLE) /* restore running state */ 10164 t4_write_reg(adap, A_TP_DBG_LA_CONFIG, 10165 cfg | adap->params.tp.la_mask); 10166 } 10167 10168 /* 10169 * SGE Hung Ingress DMA Warning Threshold time and Warning Repeat Rate (in 10170 * seconds). If we find one of the SGE Ingress DMA State Machines in the same 10171 * state for more than the Warning Threshold then we'll issue a warning about 10172 * a potential hang. We'll repeat the warning as the SGE Ingress DMA Channel 10173 * appears to be hung every Warning Repeat second till the situation clears. 10174 * If the situation clears, we'll note that as well. 10175 */ 10176 #define SGE_IDMA_WARN_THRESH 1 10177 #define SGE_IDMA_WARN_REPEAT 300 10178 10179 /** 10180 * t4_idma_monitor_init - initialize SGE Ingress DMA Monitor 10181 * @adapter: the adapter 10182 * @idma: the adapter IDMA Monitor state 10183 * 10184 * Initialize the state of an SGE Ingress DMA Monitor. 10185 */ 10186 void t4_idma_monitor_init(struct adapter *adapter, 10187 struct sge_idma_monitor_state *idma) 10188 { 10189 /* Initialize the state variables for detecting an SGE Ingress DMA 10190 * hang. The SGE has internal counters which count up on each clock 10191 * tick whenever the SGE finds its Ingress DMA State Engines in the 10192 * same state they were on the previous clock tick. The clock used is 10193 * the Core Clock so we have a limit on the maximum "time" they can 10194 * record; typically a very small number of seconds. For instance, 10195 * with a 600MHz Core Clock, we can only count up to a bit more than 10196 * 7s. So we'll synthesize a larger counter in order to not run the 10197 * risk of having the "timers" overflow and give us the flexibility to 10198 * maintain a Hung SGE State Machine of our own which operates across 10199 * a longer time frame. 10200 */ 10201 idma->idma_1s_thresh = core_ticks_per_usec(adapter) * 1000000; /* 1s */ 10202 idma->idma_stalled[0] = idma->idma_stalled[1] = 0; 10203 } 10204 10205 /** 10206 * t4_idma_monitor - monitor SGE Ingress DMA state 10207 * @adapter: the adapter 10208 * @idma: the adapter IDMA Monitor state 10209 * @hz: number of ticks/second 10210 * @ticks: number of ticks since the last IDMA Monitor call 10211 */ 10212 void t4_idma_monitor(struct adapter *adapter, 10213 struct sge_idma_monitor_state *idma, 10214 int hz, int ticks) 10215 { 10216 int i, idma_same_state_cnt[2]; 10217 10218 /* Read the SGE Debug Ingress DMA Same State Count registers. These 10219 * are counters inside the SGE which count up on each clock when the 10220 * SGE finds its Ingress DMA State Engines in the same states they 10221 * were in the previous clock. The counters will peg out at 10222 * 0xffffffff without wrapping around so once they pass the 1s 10223 * threshold they'll stay above that till the IDMA state changes. 10224 */ 10225 t4_write_reg(adapter, A_SGE_DEBUG_INDEX, 13); 10226 idma_same_state_cnt[0] = t4_read_reg(adapter, A_SGE_DEBUG_DATA_HIGH); 10227 idma_same_state_cnt[1] = t4_read_reg(adapter, A_SGE_DEBUG_DATA_LOW); 10228 10229 for (i = 0; i < 2; i++) { 10230 u32 debug0, debug11; 10231 10232 /* If the Ingress DMA Same State Counter ("timer") is less 10233 * than 1s, then we can reset our synthesized Stall Timer and 10234 * continue. If we have previously emitted warnings about a 10235 * potential stalled Ingress Queue, issue a note indicating 10236 * that the Ingress Queue has resumed forward progress. 10237 */ 10238 if (idma_same_state_cnt[i] < idma->idma_1s_thresh) { 10239 if (idma->idma_stalled[i] >= SGE_IDMA_WARN_THRESH*hz) 10240 CH_WARN(adapter, "SGE idma%d, queue %u, " 10241 "resumed after %d seconds\n", 10242 i, idma->idma_qid[i], 10243 idma->idma_stalled[i]/hz); 10244 idma->idma_stalled[i] = 0; 10245 continue; 10246 } 10247 10248 /* Synthesize an SGE Ingress DMA Same State Timer in the Hz 10249 * domain. The first time we get here it'll be because we 10250 * passed the 1s Threshold; each additional time it'll be 10251 * because the RX Timer Callback is being fired on its regular 10252 * schedule. 10253 * 10254 * If the stall is below our Potential Hung Ingress Queue 10255 * Warning Threshold, continue. 10256 */ 10257 if (idma->idma_stalled[i] == 0) { 10258 idma->idma_stalled[i] = hz; 10259 idma->idma_warn[i] = 0; 10260 } else { 10261 idma->idma_stalled[i] += ticks; 10262 idma->idma_warn[i] -= ticks; 10263 } 10264 10265 if (idma->idma_stalled[i] < SGE_IDMA_WARN_THRESH*hz) 10266 continue; 10267 10268 /* We'll issue a warning every SGE_IDMA_WARN_REPEAT seconds. 10269 */ 10270 if (idma->idma_warn[i] > 0) 10271 continue; 10272 idma->idma_warn[i] = SGE_IDMA_WARN_REPEAT*hz; 10273 10274 /* Read and save the SGE IDMA State and Queue ID information. 10275 * We do this every time in case it changes across time ... 10276 * can't be too careful ... 10277 */ 10278 t4_write_reg(adapter, A_SGE_DEBUG_INDEX, 0); 10279 debug0 = t4_read_reg(adapter, A_SGE_DEBUG_DATA_LOW); 10280 idma->idma_state[i] = (debug0 >> (i * 9)) & 0x3f; 10281 10282 t4_write_reg(adapter, A_SGE_DEBUG_INDEX, 11); 10283 debug11 = t4_read_reg(adapter, A_SGE_DEBUG_DATA_LOW); 10284 idma->idma_qid[i] = (debug11 >> (i * 16)) & 0xffff; 10285 10286 CH_WARN(adapter, "SGE idma%u, queue %u, potentially stuck in " 10287 " state %u for %d seconds (debug0=%#x, debug11=%#x)\n", 10288 i, idma->idma_qid[i], idma->idma_state[i], 10289 idma->idma_stalled[i]/hz, 10290 debug0, debug11); 10291 t4_sge_decode_idma_state(adapter, idma->idma_state[i]); 10292 } 10293 } 10294 10295 /** 10296 * t4_set_vf_mac - Set MAC address for the specified VF 10297 * @adapter: The adapter 10298 * @pf: the PF used to instantiate the VFs 10299 * @vf: one of the VFs instantiated by the specified PF 10300 * @naddr: the number of MAC addresses 10301 * @addr: the MAC address(es) to be set to the specified VF 10302 */ 10303 int t4_set_vf_mac(struct adapter *adapter, unsigned int pf, unsigned int vf, 10304 unsigned int naddr, u8 *addr) 10305 { 10306 struct fw_acl_mac_cmd cmd; 10307 10308 memset(&cmd, 0, sizeof(cmd)); 10309 cmd.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_ACL_MAC_CMD) | 10310 F_FW_CMD_REQUEST | 10311 F_FW_CMD_WRITE | 10312 V_FW_ACL_MAC_CMD_PFN(pf) | 10313 V_FW_ACL_MAC_CMD_VFN(vf)); 10314 10315 /* Note: Do not enable the ACL */ 10316 cmd.en_to_len16 = cpu_to_be32((unsigned int)FW_LEN16(cmd)); 10317 cmd.nmac = naddr; 10318 10319 switch (pf) { 10320 case 3: 10321 memcpy(cmd.macaddr3, addr, sizeof(cmd.macaddr3)); 10322 break; 10323 case 2: 10324 memcpy(cmd.macaddr2, addr, sizeof(cmd.macaddr2)); 10325 break; 10326 case 1: 10327 memcpy(cmd.macaddr1, addr, sizeof(cmd.macaddr1)); 10328 break; 10329 case 0: 10330 memcpy(cmd.macaddr0, addr, sizeof(cmd.macaddr0)); 10331 break; 10332 } 10333 10334 return t4_wr_mbox(adapter, adapter->mbox, &cmd, sizeof(cmd), &cmd); 10335 } 10336 10337 /** 10338 * t4_read_pace_tbl - read the pace table 10339 * @adap: the adapter 10340 * @pace_vals: holds the returned values 10341 * 10342 * Returns the values of TP's pace table in microseconds. 10343 */ 10344 void t4_read_pace_tbl(struct adapter *adap, unsigned int pace_vals[NTX_SCHED]) 10345 { 10346 unsigned int i, v; 10347 10348 for (i = 0; i < NTX_SCHED; i++) { 10349 t4_write_reg(adap, A_TP_PACE_TABLE, 0xffff0000 + i); 10350 v = t4_read_reg(adap, A_TP_PACE_TABLE); 10351 pace_vals[i] = dack_ticks_to_usec(adap, v); 10352 } 10353 } 10354 10355 /** 10356 * t4_get_tx_sched - get the configuration of a Tx HW traffic scheduler 10357 * @adap: the adapter 10358 * @sched: the scheduler index 10359 * @kbps: the byte rate in Kbps 10360 * @ipg: the interpacket delay in tenths of nanoseconds 10361 * 10362 * Return the current configuration of a HW Tx scheduler. 10363 */ 10364 void t4_get_tx_sched(struct adapter *adap, unsigned int sched, unsigned int *kbps, 10365 unsigned int *ipg, bool sleep_ok) 10366 { 10367 unsigned int v, addr, bpt, cpt; 10368 10369 if (kbps) { 10370 addr = A_TP_TX_MOD_Q1_Q0_RATE_LIMIT - sched / 2; 10371 t4_tp_tm_pio_read(adap, &v, 1, addr, sleep_ok); 10372 if (sched & 1) 10373 v >>= 16; 10374 bpt = (v >> 8) & 0xff; 10375 cpt = v & 0xff; 10376 if (!cpt) 10377 *kbps = 0; /* scheduler disabled */ 10378 else { 10379 v = (adap->params.vpd.cclk * 1000) / cpt; /* ticks/s */ 10380 *kbps = (v * bpt) / 125; 10381 } 10382 } 10383 if (ipg) { 10384 addr = A_TP_TX_MOD_Q1_Q0_TIMER_SEPARATOR - sched / 2; 10385 t4_tp_tm_pio_read(adap, &v, 1, addr, sleep_ok); 10386 if (sched & 1) 10387 v >>= 16; 10388 v &= 0xffff; 10389 *ipg = (10000 * v) / core_ticks_per_usec(adap); 10390 } 10391 } 10392 10393 /** 10394 * t4_load_cfg - download config file 10395 * @adap: the adapter 10396 * @cfg_data: the cfg text file to write 10397 * @size: text file size 10398 * 10399 * Write the supplied config text file to the card's serial flash. 10400 */ 10401 int t4_load_cfg(struct adapter *adap, const u8 *cfg_data, unsigned int size) 10402 { 10403 int ret, i, n, cfg_addr; 10404 unsigned int addr; 10405 unsigned int flash_cfg_start_sec; 10406 unsigned int sf_sec_size = adap->params.sf_size / adap->params.sf_nsec; 10407 10408 cfg_addr = t4_flash_cfg_addr(adap); 10409 if (cfg_addr < 0) 10410 return cfg_addr; 10411 10412 addr = cfg_addr; 10413 flash_cfg_start_sec = addr / SF_SEC_SIZE; 10414 10415 if (size > FLASH_CFG_MAX_SIZE) { 10416 CH_ERR(adap, "cfg file too large, max is %u bytes\n", 10417 FLASH_CFG_MAX_SIZE); 10418 return -EFBIG; 10419 } 10420 10421 i = DIV_ROUND_UP(FLASH_CFG_MAX_SIZE, /* # of sectors spanned */ 10422 sf_sec_size); 10423 ret = t4_flash_erase_sectors(adap, flash_cfg_start_sec, 10424 flash_cfg_start_sec + i - 1); 10425 /* 10426 * If size == 0 then we're simply erasing the FLASH sectors associated 10427 * with the on-adapter Firmware Configuration File. 10428 */ 10429 if (ret || size == 0) 10430 goto out; 10431 10432 /* this will write to the flash up to SF_PAGE_SIZE at a time */ 10433 for (i = 0; i< size; i+= SF_PAGE_SIZE) { 10434 if ( (size - i) < SF_PAGE_SIZE) 10435 n = size - i; 10436 else 10437 n = SF_PAGE_SIZE; 10438 ret = t4_write_flash(adap, addr, n, cfg_data, 1); 10439 if (ret) 10440 goto out; 10441 10442 addr += SF_PAGE_SIZE; 10443 cfg_data += SF_PAGE_SIZE; 10444 } 10445 10446 out: 10447 if (ret) 10448 CH_ERR(adap, "config file %s failed %d\n", 10449 (size == 0 ? "clear" : "download"), ret); 10450 return ret; 10451 } 10452 10453 /** 10454 * t5_fw_init_extern_mem - initialize the external memory 10455 * @adap: the adapter 10456 * 10457 * Initializes the external memory on T5. 10458 */ 10459 int t5_fw_init_extern_mem(struct adapter *adap) 10460 { 10461 u32 params[1], val[1]; 10462 int ret; 10463 10464 if (!is_t5(adap)) 10465 return 0; 10466 10467 val[0] = 0xff; /* Initialize all MCs */ 10468 params[0] = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | 10469 V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_MCINIT)); 10470 ret = t4_set_params_timeout(adap, adap->mbox, adap->pf, 0, 1, params, val, 10471 FW_CMD_MAX_TIMEOUT); 10472 10473 return ret; 10474 } 10475 10476 /* BIOS boot headers */ 10477 typedef struct pci_expansion_rom_header { 10478 u8 signature[2]; /* ROM Signature. Should be 0xaa55 */ 10479 u8 reserved[22]; /* Reserved per processor Architecture data */ 10480 u8 pcir_offset[2]; /* Offset to PCI Data Structure */ 10481 } pci_exp_rom_header_t; /* PCI_EXPANSION_ROM_HEADER */ 10482 10483 /* Legacy PCI Expansion ROM Header */ 10484 typedef struct legacy_pci_expansion_rom_header { 10485 u8 signature[2]; /* ROM Signature. Should be 0xaa55 */ 10486 u8 size512; /* Current Image Size in units of 512 bytes */ 10487 u8 initentry_point[4]; 10488 u8 cksum; /* Checksum computed on the entire Image */ 10489 u8 reserved[16]; /* Reserved */ 10490 u8 pcir_offset[2]; /* Offset to PCI Data Struture */ 10491 } legacy_pci_exp_rom_header_t; /* LEGACY_PCI_EXPANSION_ROM_HEADER */ 10492 10493 /* EFI PCI Expansion ROM Header */ 10494 typedef struct efi_pci_expansion_rom_header { 10495 u8 signature[2]; // ROM signature. The value 0xaa55 10496 u8 initialization_size[2]; /* Units 512. Includes this header */ 10497 u8 efi_signature[4]; /* Signature from EFI image header. 0x0EF1 */ 10498 u8 efi_subsystem[2]; /* Subsystem value for EFI image header */ 10499 u8 efi_machine_type[2]; /* Machine type from EFI image header */ 10500 u8 compression_type[2]; /* Compression type. */ 10501 /* 10502 * Compression type definition 10503 * 0x0: uncompressed 10504 * 0x1: Compressed 10505 * 0x2-0xFFFF: Reserved 10506 */ 10507 u8 reserved[8]; /* Reserved */ 10508 u8 efi_image_header_offset[2]; /* Offset to EFI Image */ 10509 u8 pcir_offset[2]; /* Offset to PCI Data Structure */ 10510 } efi_pci_exp_rom_header_t; /* EFI PCI Expansion ROM Header */ 10511 10512 /* PCI Data Structure Format */ 10513 typedef struct pcir_data_structure { /* PCI Data Structure */ 10514 u8 signature[4]; /* Signature. The string "PCIR" */ 10515 u8 vendor_id[2]; /* Vendor Identification */ 10516 u8 device_id[2]; /* Device Identification */ 10517 u8 vital_product[2]; /* Pointer to Vital Product Data */ 10518 u8 length[2]; /* PCIR Data Structure Length */ 10519 u8 revision; /* PCIR Data Structure Revision */ 10520 u8 class_code[3]; /* Class Code */ 10521 u8 image_length[2]; /* Image Length. Multiple of 512B */ 10522 u8 code_revision[2]; /* Revision Level of Code/Data */ 10523 u8 code_type; /* Code Type. */ 10524 /* 10525 * PCI Expansion ROM Code Types 10526 * 0x00: Intel IA-32, PC-AT compatible. Legacy 10527 * 0x01: Open Firmware standard for PCI. FCODE 10528 * 0x02: Hewlett-Packard PA RISC. HP reserved 10529 * 0x03: EFI Image. EFI 10530 * 0x04-0xFF: Reserved. 10531 */ 10532 u8 indicator; /* Indicator. Identifies the last image in the ROM */ 10533 u8 reserved[2]; /* Reserved */ 10534 } pcir_data_t; /* PCI__DATA_STRUCTURE */ 10535 10536 /* BOOT constants */ 10537 enum { 10538 BOOT_FLASH_BOOT_ADDR = 0x0,/* start address of boot image in flash */ 10539 BOOT_SIGNATURE = 0xaa55, /* signature of BIOS boot ROM */ 10540 BOOT_SIZE_INC = 512, /* image size measured in 512B chunks */ 10541 BOOT_MIN_SIZE = sizeof(pci_exp_rom_header_t), /* basic header */ 10542 BOOT_MAX_SIZE = 1024*BOOT_SIZE_INC, /* 1 byte * length increment */ 10543 VENDOR_ID = 0x1425, /* Vendor ID */ 10544 PCIR_SIGNATURE = 0x52494350 /* PCIR signature */ 10545 }; 10546 10547 /* 10548 * modify_device_id - Modifies the device ID of the Boot BIOS image 10549 * @adatper: the device ID to write. 10550 * @boot_data: the boot image to modify. 10551 * 10552 * Write the supplied device ID to the boot BIOS image. 10553 */ 10554 static void modify_device_id(int device_id, u8 *boot_data) 10555 { 10556 legacy_pci_exp_rom_header_t *header; 10557 pcir_data_t *pcir_header; 10558 u32 cur_header = 0; 10559 10560 /* 10561 * Loop through all chained images and change the device ID's 10562 */ 10563 while (1) { 10564 header = (legacy_pci_exp_rom_header_t *) &boot_data[cur_header]; 10565 pcir_header = (pcir_data_t *) &boot_data[cur_header + 10566 le16_to_cpu(*(u16*)header->pcir_offset)]; 10567 10568 /* 10569 * Only modify the Device ID if code type is Legacy or HP. 10570 * 0x00: Okay to modify 10571 * 0x01: FCODE. Do not be modify 10572 * 0x03: Okay to modify 10573 * 0x04-0xFF: Do not modify 10574 */ 10575 if (pcir_header->code_type == 0x00) { 10576 u8 csum = 0; 10577 int i; 10578 10579 /* 10580 * Modify Device ID to match current adatper 10581 */ 10582 *(u16*) pcir_header->device_id = device_id; 10583 10584 /* 10585 * Set checksum temporarily to 0. 10586 * We will recalculate it later. 10587 */ 10588 header->cksum = 0x0; 10589 10590 /* 10591 * Calculate and update checksum 10592 */ 10593 for (i = 0; i < (header->size512 * 512); i++) 10594 csum += (u8)boot_data[cur_header + i]; 10595 10596 /* 10597 * Invert summed value to create the checksum 10598 * Writing new checksum value directly to the boot data 10599 */ 10600 boot_data[cur_header + 7] = -csum; 10601 10602 } else if (pcir_header->code_type == 0x03) { 10603 10604 /* 10605 * Modify Device ID to match current adatper 10606 */ 10607 *(u16*) pcir_header->device_id = device_id; 10608 10609 } 10610 10611 10612 /* 10613 * Check indicator element to identify if this is the last 10614 * image in the ROM. 10615 */ 10616 if (pcir_header->indicator & 0x80) 10617 break; 10618 10619 /* 10620 * Move header pointer up to the next image in the ROM. 10621 */ 10622 cur_header += header->size512 * 512; 10623 } 10624 } 10625 10626 /* 10627 * t4_load_boot - download boot flash 10628 * @adapter: the adapter 10629 * @boot_data: the boot image to write 10630 * @boot_addr: offset in flash to write boot_data 10631 * @size: image size 10632 * 10633 * Write the supplied boot image to the card's serial flash. 10634 * The boot image has the following sections: a 28-byte header and the 10635 * boot image. 10636 */ 10637 int t4_load_boot(struct adapter *adap, u8 *boot_data, 10638 unsigned int boot_addr, unsigned int size) 10639 { 10640 pci_exp_rom_header_t *header; 10641 int pcir_offset ; 10642 pcir_data_t *pcir_header; 10643 int ret, addr; 10644 uint16_t device_id; 10645 unsigned int i; 10646 unsigned int boot_sector = (boot_addr * 1024 ); 10647 unsigned int sf_sec_size = adap->params.sf_size / adap->params.sf_nsec; 10648 10649 /* 10650 * Make sure the boot image does not encroach on the firmware region 10651 */ 10652 if ((boot_sector + size) >> 16 > FLASH_FW_START_SEC) { 10653 CH_ERR(adap, "boot image encroaching on firmware region\n"); 10654 return -EFBIG; 10655 } 10656 10657 /* 10658 * The boot sector is comprised of the Expansion-ROM boot, iSCSI boot, 10659 * and Boot configuration data sections. These 3 boot sections span 10660 * sectors 0 to 7 in flash and live right before the FW image location. 10661 */ 10662 i = DIV_ROUND_UP(size ? size : FLASH_FW_START, 10663 sf_sec_size); 10664 ret = t4_flash_erase_sectors(adap, boot_sector >> 16, 10665 (boot_sector >> 16) + i - 1); 10666 10667 /* 10668 * If size == 0 then we're simply erasing the FLASH sectors associated 10669 * with the on-adapter option ROM file 10670 */ 10671 if (ret || (size == 0)) 10672 goto out; 10673 10674 /* Get boot header */ 10675 header = (pci_exp_rom_header_t *)boot_data; 10676 pcir_offset = le16_to_cpu(*(u16 *)header->pcir_offset); 10677 /* PCIR Data Structure */ 10678 pcir_header = (pcir_data_t *) &boot_data[pcir_offset]; 10679 10680 /* 10681 * Perform some primitive sanity testing to avoid accidentally 10682 * writing garbage over the boot sectors. We ought to check for 10683 * more but it's not worth it for now ... 10684 */ 10685 if (size < BOOT_MIN_SIZE || size > BOOT_MAX_SIZE) { 10686 CH_ERR(adap, "boot image too small/large\n"); 10687 return -EFBIG; 10688 } 10689 10690 #ifndef CHELSIO_T4_DIAGS 10691 /* 10692 * Check BOOT ROM header signature 10693 */ 10694 if (le16_to_cpu(*(u16*)header->signature) != BOOT_SIGNATURE ) { 10695 CH_ERR(adap, "Boot image missing signature\n"); 10696 return -EINVAL; 10697 } 10698 10699 /* 10700 * Check PCI header signature 10701 */ 10702 if (le32_to_cpu(*(u32*)pcir_header->signature) != PCIR_SIGNATURE) { 10703 CH_ERR(adap, "PCI header missing signature\n"); 10704 return -EINVAL; 10705 } 10706 10707 /* 10708 * Check Vendor ID matches Chelsio ID 10709 */ 10710 if (le16_to_cpu(*(u16*)pcir_header->vendor_id) != VENDOR_ID) { 10711 CH_ERR(adap, "Vendor ID missing signature\n"); 10712 return -EINVAL; 10713 } 10714 #endif 10715 10716 /* 10717 * Retrieve adapter's device ID 10718 */ 10719 t4_os_pci_read_cfg2(adap, PCI_DEVICE_ID, &device_id); 10720 /* Want to deal with PF 0 so I strip off PF 4 indicator */ 10721 device_id = device_id & 0xf0ff; 10722 10723 /* 10724 * Check PCIE Device ID 10725 */ 10726 if (le16_to_cpu(*(u16*)pcir_header->device_id) != device_id) { 10727 /* 10728 * Change the device ID in the Boot BIOS image to match 10729 * the Device ID of the current adapter. 10730 */ 10731 modify_device_id(device_id, boot_data); 10732 } 10733 10734 /* 10735 * Skip over the first SF_PAGE_SIZE worth of data and write it after 10736 * we finish copying the rest of the boot image. This will ensure 10737 * that the BIOS boot header will only be written if the boot image 10738 * was written in full. 10739 */ 10740 addr = boot_sector; 10741 for (size -= SF_PAGE_SIZE; size; size -= SF_PAGE_SIZE) { 10742 addr += SF_PAGE_SIZE; 10743 boot_data += SF_PAGE_SIZE; 10744 ret = t4_write_flash(adap, addr, SF_PAGE_SIZE, boot_data, 0); 10745 if (ret) 10746 goto out; 10747 } 10748 10749 ret = t4_write_flash(adap, boot_sector, SF_PAGE_SIZE, 10750 (const u8 *)header, 0); 10751 10752 out: 10753 if (ret) 10754 CH_ERR(adap, "boot image download failed, error %d\n", ret); 10755 return ret; 10756 } 10757 10758 /* 10759 * t4_flash_bootcfg_addr - return the address of the flash optionrom configuration 10760 * @adapter: the adapter 10761 * 10762 * Return the address within the flash where the OptionROM Configuration 10763 * is stored, or an error if the device FLASH is too small to contain 10764 * a OptionROM Configuration. 10765 */ 10766 static int t4_flash_bootcfg_addr(struct adapter *adapter) 10767 { 10768 /* 10769 * If the device FLASH isn't large enough to hold a Firmware 10770 * Configuration File, return an error. 10771 */ 10772 if (adapter->params.sf_size < FLASH_BOOTCFG_START + FLASH_BOOTCFG_MAX_SIZE) 10773 return -ENOSPC; 10774 10775 return FLASH_BOOTCFG_START; 10776 } 10777 10778 int t4_load_bootcfg(struct adapter *adap,const u8 *cfg_data, unsigned int size) 10779 { 10780 int ret, i, n, cfg_addr; 10781 unsigned int addr; 10782 unsigned int flash_cfg_start_sec; 10783 unsigned int sf_sec_size = adap->params.sf_size / adap->params.sf_nsec; 10784 10785 cfg_addr = t4_flash_bootcfg_addr(adap); 10786 if (cfg_addr < 0) 10787 return cfg_addr; 10788 10789 addr = cfg_addr; 10790 flash_cfg_start_sec = addr / SF_SEC_SIZE; 10791 10792 if (size > FLASH_BOOTCFG_MAX_SIZE) { 10793 CH_ERR(adap, "bootcfg file too large, max is %u bytes\n", 10794 FLASH_BOOTCFG_MAX_SIZE); 10795 return -EFBIG; 10796 } 10797 10798 i = DIV_ROUND_UP(FLASH_BOOTCFG_MAX_SIZE,/* # of sectors spanned */ 10799 sf_sec_size); 10800 ret = t4_flash_erase_sectors(adap, flash_cfg_start_sec, 10801 flash_cfg_start_sec + i - 1); 10802 10803 /* 10804 * If size == 0 then we're simply erasing the FLASH sectors associated 10805 * with the on-adapter OptionROM Configuration File. 10806 */ 10807 if (ret || size == 0) 10808 goto out; 10809 10810 /* this will write to the flash up to SF_PAGE_SIZE at a time */ 10811 for (i = 0; i< size; i+= SF_PAGE_SIZE) { 10812 if ( (size - i) < SF_PAGE_SIZE) 10813 n = size - i; 10814 else 10815 n = SF_PAGE_SIZE; 10816 ret = t4_write_flash(adap, addr, n, cfg_data, 0); 10817 if (ret) 10818 goto out; 10819 10820 addr += SF_PAGE_SIZE; 10821 cfg_data += SF_PAGE_SIZE; 10822 } 10823 10824 out: 10825 if (ret) 10826 CH_ERR(adap, "boot config data %s failed %d\n", 10827 (size == 0 ? "clear" : "download"), ret); 10828 return ret; 10829 } 10830 10831 /** 10832 * t4_set_filter_cfg - set up filter mode/mask and ingress config. 10833 * @adap: the adapter 10834 * @mode: a bitmap selecting which optional filter components to enable 10835 * @mask: a bitmap selecting which components to enable in filter mask 10836 * @vnic_mode: the ingress config/vnic mode setting 10837 * 10838 * Sets the filter mode and mask by selecting the optional components to 10839 * enable in filter tuples. Returns 0 on success and a negative error if 10840 * the requested mode needs more bits than are available for optional 10841 * components. The filter mask must be a subset of the filter mode. 10842 */ 10843 int t4_set_filter_cfg(struct adapter *adap, int mode, int mask, int vnic_mode) 10844 { 10845 static const uint8_t width[] = {1, 3, 17, 17, 8, 8, 16, 9, 3, 1}; 10846 int i, nbits, rc; 10847 uint32_t param, val; 10848 uint16_t fmode, fmask; 10849 const int maxbits = adap->chip_params->filter_opt_len; 10850 10851 if (mode != -1 || mask != -1) { 10852 if (mode != -1) { 10853 fmode = mode; 10854 nbits = 0; 10855 for (i = S_FCOE; i <= S_FRAGMENTATION; i++) { 10856 if (fmode & (1 << i)) 10857 nbits += width[i]; 10858 } 10859 if (nbits > maxbits) { 10860 CH_ERR(adap, "optional fields in the filter " 10861 "mode (0x%x) add up to %d bits " 10862 "(must be <= %db). Remove some fields and " 10863 "try again.\n", fmode, nbits, maxbits); 10864 return -E2BIG; 10865 } 10866 10867 /* 10868 * Hardware wants the bits to be maxed out. Keep 10869 * setting them until there's no room for more. 10870 */ 10871 for (i = S_FCOE; i <= S_FRAGMENTATION; i++) { 10872 if (fmode & (1 << i)) 10873 continue; 10874 if (nbits + width[i] <= maxbits) { 10875 fmode |= 1 << i; 10876 nbits += width[i]; 10877 if (nbits == maxbits) 10878 break; 10879 } 10880 } 10881 10882 fmask = fmode & adap->params.tp.filter_mask; 10883 if (fmask != adap->params.tp.filter_mask) { 10884 CH_WARN(adap, 10885 "filter mask will be changed from 0x%x to " 10886 "0x%x to comply with the filter mode (0x%x).\n", 10887 adap->params.tp.filter_mask, fmask, fmode); 10888 } 10889 } else { 10890 fmode = adap->params.tp.filter_mode; 10891 fmask = mask; 10892 if ((fmode | fmask) != fmode) { 10893 CH_ERR(adap, 10894 "filter mask (0x%x) must be a subset of " 10895 "the filter mode (0x%x).\n", fmask, fmode); 10896 return -EINVAL; 10897 } 10898 } 10899 10900 param = V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | 10901 V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_FILTER) | 10902 V_FW_PARAMS_PARAM_Y(FW_PARAM_DEV_FILTER_MODE_MASK); 10903 val = V_FW_PARAMS_PARAM_FILTER_MODE(fmode) | 10904 V_FW_PARAMS_PARAM_FILTER_MASK(fmask); 10905 rc = t4_set_params(adap, adap->mbox, adap->pf, 0, 1, ¶m, 10906 &val); 10907 if (rc < 0) 10908 return rc; 10909 } 10910 10911 if (vnic_mode != -1) { 10912 param = V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | 10913 V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_FILTER) | 10914 V_FW_PARAMS_PARAM_Y(FW_PARAM_DEV_FILTER_VNIC_MODE); 10915 val = vnic_mode; 10916 rc = t4_set_params(adap, adap->mbox, adap->pf, 0, 1, ¶m, 10917 &val); 10918 if (rc < 0) 10919 return rc; 10920 } 10921 10922 /* Refresh. */ 10923 read_filter_mode_and_ingress_config(adap); 10924 10925 return 0; 10926 } 10927 10928 /** 10929 * t4_clr_port_stats - clear port statistics 10930 * @adap: the adapter 10931 * @idx: the port index 10932 * 10933 * Clear HW statistics for the given port. 10934 */ 10935 void t4_clr_port_stats(struct adapter *adap, int idx) 10936 { 10937 unsigned int i; 10938 u32 bgmap = adap2pinfo(adap, idx)->mps_bg_map; 10939 u32 port_base_addr; 10940 10941 if (is_t4(adap)) 10942 port_base_addr = PORT_BASE(idx); 10943 else 10944 port_base_addr = T5_PORT_BASE(idx); 10945 10946 for (i = A_MPS_PORT_STAT_TX_PORT_BYTES_L; 10947 i <= A_MPS_PORT_STAT_TX_PORT_PPP7_H; i += 8) 10948 t4_write_reg(adap, port_base_addr + i, 0); 10949 for (i = A_MPS_PORT_STAT_RX_PORT_BYTES_L; 10950 i <= A_MPS_PORT_STAT_RX_PORT_LESS_64B_H; i += 8) 10951 t4_write_reg(adap, port_base_addr + i, 0); 10952 for (i = 0; i < 4; i++) 10953 if (bgmap & (1 << i)) { 10954 t4_write_reg(adap, 10955 A_MPS_STAT_RX_BG_0_MAC_DROP_FRAME_L + i * 8, 0); 10956 t4_write_reg(adap, 10957 A_MPS_STAT_RX_BG_0_MAC_TRUNC_FRAME_L + i * 8, 0); 10958 } 10959 } 10960 10961 /** 10962 * t4_i2c_io - read/write I2C data from adapter 10963 * @adap: the adapter 10964 * @port: Port number if per-port device; <0 if not 10965 * @devid: per-port device ID or absolute device ID 10966 * @offset: byte offset into device I2C space 10967 * @len: byte length of I2C space data 10968 * @buf: buffer in which to return I2C data for read 10969 * buffer which holds the I2C data for write 10970 * @write: if true, do a write; else do a read 10971 * Reads/Writes the I2C data from/to the indicated device and location. 10972 */ 10973 int t4_i2c_io(struct adapter *adap, unsigned int mbox, 10974 int port, unsigned int devid, 10975 unsigned int offset, unsigned int len, 10976 u8 *buf, bool write) 10977 { 10978 struct fw_ldst_cmd ldst_cmd, ldst_rpl; 10979 unsigned int i2c_max = sizeof(ldst_cmd.u.i2c.data); 10980 int ret = 0; 10981 10982 if (len > I2C_PAGE_SIZE) 10983 return -EINVAL; 10984 10985 /* Dont allow reads that spans multiple pages */ 10986 if (offset < I2C_PAGE_SIZE && offset + len > I2C_PAGE_SIZE) 10987 return -EINVAL; 10988 10989 memset(&ldst_cmd, 0, sizeof(ldst_cmd)); 10990 ldst_cmd.op_to_addrspace = 10991 cpu_to_be32(V_FW_CMD_OP(FW_LDST_CMD) | 10992 F_FW_CMD_REQUEST | 10993 (write ? F_FW_CMD_WRITE : F_FW_CMD_READ) | 10994 V_FW_LDST_CMD_ADDRSPACE(FW_LDST_ADDRSPC_I2C)); 10995 ldst_cmd.cycles_to_len16 = cpu_to_be32(FW_LEN16(ldst_cmd)); 10996 ldst_cmd.u.i2c.pid = (port < 0 ? 0xff : port); 10997 ldst_cmd.u.i2c.did = devid; 10998 10999 while (len > 0) { 11000 unsigned int i2c_len = (len < i2c_max) ? len : i2c_max; 11001 11002 ldst_cmd.u.i2c.boffset = offset; 11003 ldst_cmd.u.i2c.blen = i2c_len; 11004 11005 if (write) 11006 memcpy(ldst_cmd.u.i2c.data, buf, i2c_len); 11007 11008 ret = t4_wr_mbox(adap, mbox, &ldst_cmd, sizeof(ldst_cmd), 11009 write ? NULL : &ldst_rpl); 11010 if (ret) 11011 break; 11012 11013 if (!write) 11014 memcpy(buf, ldst_rpl.u.i2c.data, i2c_len); 11015 offset += i2c_len; 11016 buf += i2c_len; 11017 len -= i2c_len; 11018 } 11019 11020 return ret; 11021 } 11022 11023 int t4_i2c_rd(struct adapter *adap, unsigned int mbox, 11024 int port, unsigned int devid, 11025 unsigned int offset, unsigned int len, 11026 u8 *buf) 11027 { 11028 return t4_i2c_io(adap, mbox, port, devid, offset, len, buf, false); 11029 } 11030 11031 int t4_i2c_wr(struct adapter *adap, unsigned int mbox, 11032 int port, unsigned int devid, 11033 unsigned int offset, unsigned int len, 11034 u8 *buf) 11035 { 11036 return t4_i2c_io(adap, mbox, port, devid, offset, len, buf, true); 11037 } 11038 11039 /** 11040 * t4_sge_ctxt_rd - read an SGE context through FW 11041 * @adap: the adapter 11042 * @mbox: mailbox to use for the FW command 11043 * @cid: the context id 11044 * @ctype: the context type 11045 * @data: where to store the context data 11046 * 11047 * Issues a FW command through the given mailbox to read an SGE context. 11048 */ 11049 int t4_sge_ctxt_rd(struct adapter *adap, unsigned int mbox, unsigned int cid, 11050 enum ctxt_type ctype, u32 *data) 11051 { 11052 int ret; 11053 struct fw_ldst_cmd c; 11054 11055 if (ctype == CTXT_EGRESS) 11056 ret = FW_LDST_ADDRSPC_SGE_EGRC; 11057 else if (ctype == CTXT_INGRESS) 11058 ret = FW_LDST_ADDRSPC_SGE_INGC; 11059 else if (ctype == CTXT_FLM) 11060 ret = FW_LDST_ADDRSPC_SGE_FLMC; 11061 else 11062 ret = FW_LDST_ADDRSPC_SGE_CONMC; 11063 11064 memset(&c, 0, sizeof(c)); 11065 c.op_to_addrspace = cpu_to_be32(V_FW_CMD_OP(FW_LDST_CMD) | 11066 F_FW_CMD_REQUEST | F_FW_CMD_READ | 11067 V_FW_LDST_CMD_ADDRSPACE(ret)); 11068 c.cycles_to_len16 = cpu_to_be32(FW_LEN16(c)); 11069 c.u.idctxt.physid = cpu_to_be32(cid); 11070 11071 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); 11072 if (ret == 0) { 11073 data[0] = be32_to_cpu(c.u.idctxt.ctxt_data0); 11074 data[1] = be32_to_cpu(c.u.idctxt.ctxt_data1); 11075 data[2] = be32_to_cpu(c.u.idctxt.ctxt_data2); 11076 data[3] = be32_to_cpu(c.u.idctxt.ctxt_data3); 11077 data[4] = be32_to_cpu(c.u.idctxt.ctxt_data4); 11078 data[5] = be32_to_cpu(c.u.idctxt.ctxt_data5); 11079 } 11080 return ret; 11081 } 11082 11083 /** 11084 * t4_sge_ctxt_rd_bd - read an SGE context bypassing FW 11085 * @adap: the adapter 11086 * @cid: the context id 11087 * @ctype: the context type 11088 * @data: where to store the context data 11089 * 11090 * Reads an SGE context directly, bypassing FW. This is only for 11091 * debugging when FW is unavailable. 11092 */ 11093 int t4_sge_ctxt_rd_bd(struct adapter *adap, unsigned int cid, enum ctxt_type ctype, 11094 u32 *data) 11095 { 11096 int i, ret; 11097 11098 t4_write_reg(adap, A_SGE_CTXT_CMD, V_CTXTQID(cid) | V_CTXTTYPE(ctype)); 11099 ret = t4_wait_op_done(adap, A_SGE_CTXT_CMD, F_BUSY, 0, 3, 1); 11100 if (!ret) 11101 for (i = A_SGE_CTXT_DATA0; i <= A_SGE_CTXT_DATA5; i += 4) 11102 *data++ = t4_read_reg(adap, i); 11103 return ret; 11104 } 11105 11106 int t4_sched_config(struct adapter *adapter, int type, int minmaxen, 11107 int sleep_ok) 11108 { 11109 struct fw_sched_cmd cmd; 11110 11111 memset(&cmd, 0, sizeof(cmd)); 11112 cmd.op_to_write = cpu_to_be32(V_FW_CMD_OP(FW_SCHED_CMD) | 11113 F_FW_CMD_REQUEST | 11114 F_FW_CMD_WRITE); 11115 cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd)); 11116 11117 cmd.u.config.sc = FW_SCHED_SC_CONFIG; 11118 cmd.u.config.type = type; 11119 cmd.u.config.minmaxen = minmaxen; 11120 11121 return t4_wr_mbox_meat(adapter,adapter->mbox, &cmd, sizeof(cmd), 11122 NULL, sleep_ok); 11123 } 11124 11125 int t4_sched_params(struct adapter *adapter, int type, int level, int mode, 11126 int rateunit, int ratemode, int channel, int cl, 11127 int minrate, int maxrate, int weight, int pktsize, 11128 int burstsize, int sleep_ok) 11129 { 11130 struct fw_sched_cmd cmd; 11131 11132 memset(&cmd, 0, sizeof(cmd)); 11133 cmd.op_to_write = cpu_to_be32(V_FW_CMD_OP(FW_SCHED_CMD) | 11134 F_FW_CMD_REQUEST | 11135 F_FW_CMD_WRITE); 11136 cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd)); 11137 11138 cmd.u.params.sc = FW_SCHED_SC_PARAMS; 11139 cmd.u.params.type = type; 11140 cmd.u.params.level = level; 11141 cmd.u.params.mode = mode; 11142 cmd.u.params.ch = channel; 11143 cmd.u.params.cl = cl; 11144 cmd.u.params.unit = rateunit; 11145 cmd.u.params.rate = ratemode; 11146 cmd.u.params.min = cpu_to_be32(minrate); 11147 cmd.u.params.max = cpu_to_be32(maxrate); 11148 cmd.u.params.weight = cpu_to_be16(weight); 11149 cmd.u.params.pktsize = cpu_to_be16(pktsize); 11150 cmd.u.params.burstsize = cpu_to_be16(burstsize); 11151 11152 return t4_wr_mbox_meat(adapter,adapter->mbox, &cmd, sizeof(cmd), 11153 NULL, sleep_ok); 11154 } 11155 11156 int t4_sched_params_ch_rl(struct adapter *adapter, int channel, int ratemode, 11157 unsigned int maxrate, int sleep_ok) 11158 { 11159 struct fw_sched_cmd cmd; 11160 11161 memset(&cmd, 0, sizeof(cmd)); 11162 cmd.op_to_write = cpu_to_be32(V_FW_CMD_OP(FW_SCHED_CMD) | 11163 F_FW_CMD_REQUEST | 11164 F_FW_CMD_WRITE); 11165 cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd)); 11166 11167 cmd.u.params.sc = FW_SCHED_SC_PARAMS; 11168 cmd.u.params.type = FW_SCHED_TYPE_PKTSCHED; 11169 cmd.u.params.level = FW_SCHED_PARAMS_LEVEL_CH_RL; 11170 cmd.u.params.ch = channel; 11171 cmd.u.params.rate = ratemode; /* REL or ABS */ 11172 cmd.u.params.max = cpu_to_be32(maxrate);/* % or kbps */ 11173 11174 return t4_wr_mbox_meat(adapter,adapter->mbox, &cmd, sizeof(cmd), 11175 NULL, sleep_ok); 11176 } 11177 11178 int t4_sched_params_cl_wrr(struct adapter *adapter, int channel, int cl, 11179 int weight, int sleep_ok) 11180 { 11181 struct fw_sched_cmd cmd; 11182 11183 if (weight < 0 || weight > 100) 11184 return -EINVAL; 11185 11186 memset(&cmd, 0, sizeof(cmd)); 11187 cmd.op_to_write = cpu_to_be32(V_FW_CMD_OP(FW_SCHED_CMD) | 11188 F_FW_CMD_REQUEST | 11189 F_FW_CMD_WRITE); 11190 cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd)); 11191 11192 cmd.u.params.sc = FW_SCHED_SC_PARAMS; 11193 cmd.u.params.type = FW_SCHED_TYPE_PKTSCHED; 11194 cmd.u.params.level = FW_SCHED_PARAMS_LEVEL_CL_WRR; 11195 cmd.u.params.ch = channel; 11196 cmd.u.params.cl = cl; 11197 cmd.u.params.weight = cpu_to_be16(weight); 11198 11199 return t4_wr_mbox_meat(adapter,adapter->mbox, &cmd, sizeof(cmd), 11200 NULL, sleep_ok); 11201 } 11202 11203 int t4_sched_params_cl_rl_kbps(struct adapter *adapter, int channel, int cl, 11204 int mode, unsigned int maxrate, int pktsize, int sleep_ok) 11205 { 11206 struct fw_sched_cmd cmd; 11207 11208 memset(&cmd, 0, sizeof(cmd)); 11209 cmd.op_to_write = cpu_to_be32(V_FW_CMD_OP(FW_SCHED_CMD) | 11210 F_FW_CMD_REQUEST | 11211 F_FW_CMD_WRITE); 11212 cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd)); 11213 11214 cmd.u.params.sc = FW_SCHED_SC_PARAMS; 11215 cmd.u.params.type = FW_SCHED_TYPE_PKTSCHED; 11216 cmd.u.params.level = FW_SCHED_PARAMS_LEVEL_CL_RL; 11217 cmd.u.params.mode = mode; 11218 cmd.u.params.ch = channel; 11219 cmd.u.params.cl = cl; 11220 cmd.u.params.unit = FW_SCHED_PARAMS_UNIT_BITRATE; 11221 cmd.u.params.rate = FW_SCHED_PARAMS_RATE_ABS; 11222 cmd.u.params.max = cpu_to_be32(maxrate); 11223 cmd.u.params.pktsize = cpu_to_be16(pktsize); 11224 11225 return t4_wr_mbox_meat(adapter,adapter->mbox, &cmd, sizeof(cmd), 11226 NULL, sleep_ok); 11227 } 11228 11229 /* 11230 * t4_config_watchdog - configure (enable/disable) a watchdog timer 11231 * @adapter: the adapter 11232 * @mbox: mailbox to use for the FW command 11233 * @pf: the PF owning the queue 11234 * @vf: the VF owning the queue 11235 * @timeout: watchdog timeout in ms 11236 * @action: watchdog timer / action 11237 * 11238 * There are separate watchdog timers for each possible watchdog 11239 * action. Configure one of the watchdog timers by setting a non-zero 11240 * timeout. Disable a watchdog timer by using a timeout of zero. 11241 */ 11242 int t4_config_watchdog(struct adapter *adapter, unsigned int mbox, 11243 unsigned int pf, unsigned int vf, 11244 unsigned int timeout, unsigned int action) 11245 { 11246 struct fw_watchdog_cmd wdog; 11247 unsigned int ticks; 11248 11249 /* 11250 * The watchdog command expects a timeout in units of 10ms so we need 11251 * to convert it here (via rounding) and force a minimum of one 10ms 11252 * "tick" if the timeout is non-zero but the conversion results in 0 11253 * ticks. 11254 */ 11255 ticks = (timeout + 5)/10; 11256 if (timeout && !ticks) 11257 ticks = 1; 11258 11259 memset(&wdog, 0, sizeof wdog); 11260 wdog.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_WATCHDOG_CMD) | 11261 F_FW_CMD_REQUEST | 11262 F_FW_CMD_WRITE | 11263 V_FW_PARAMS_CMD_PFN(pf) | 11264 V_FW_PARAMS_CMD_VFN(vf)); 11265 wdog.retval_len16 = cpu_to_be32(FW_LEN16(wdog)); 11266 wdog.timeout = cpu_to_be32(ticks); 11267 wdog.action = cpu_to_be32(action); 11268 11269 return t4_wr_mbox(adapter, mbox, &wdog, sizeof wdog, NULL); 11270 } 11271 11272 int t4_get_devlog_level(struct adapter *adapter, unsigned int *level) 11273 { 11274 struct fw_devlog_cmd devlog_cmd; 11275 int ret; 11276 11277 memset(&devlog_cmd, 0, sizeof(devlog_cmd)); 11278 devlog_cmd.op_to_write = cpu_to_be32(V_FW_CMD_OP(FW_DEVLOG_CMD) | 11279 F_FW_CMD_REQUEST | F_FW_CMD_READ); 11280 devlog_cmd.retval_len16 = cpu_to_be32(FW_LEN16(devlog_cmd)); 11281 ret = t4_wr_mbox(adapter, adapter->mbox, &devlog_cmd, 11282 sizeof(devlog_cmd), &devlog_cmd); 11283 if (ret) 11284 return ret; 11285 11286 *level = devlog_cmd.level; 11287 return 0; 11288 } 11289 11290 int t4_set_devlog_level(struct adapter *adapter, unsigned int level) 11291 { 11292 struct fw_devlog_cmd devlog_cmd; 11293 11294 memset(&devlog_cmd, 0, sizeof(devlog_cmd)); 11295 devlog_cmd.op_to_write = cpu_to_be32(V_FW_CMD_OP(FW_DEVLOG_CMD) | 11296 F_FW_CMD_REQUEST | 11297 F_FW_CMD_WRITE); 11298 devlog_cmd.level = level; 11299 devlog_cmd.retval_len16 = cpu_to_be32(FW_LEN16(devlog_cmd)); 11300 return t4_wr_mbox(adapter, adapter->mbox, &devlog_cmd, 11301 sizeof(devlog_cmd), &devlog_cmd); 11302 } 11303 11304 int t4_configure_add_smac(struct adapter *adap) 11305 { 11306 unsigned int param, val; 11307 int ret = 0; 11308 11309 adap->params.smac_add_support = 0; 11310 param = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | 11311 V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_ADD_SMAC)); 11312 /* Query FW to check if FW supports adding source mac address 11313 * to TCAM feature or not. 11314 * If FW returns 1, driver can use this feature and driver need to send 11315 * FW_PARAMS_PARAM_DEV_ADD_SMAC write command with value 1 to 11316 * enable adding smac to TCAM. 11317 */ 11318 ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 1, ¶m, &val); 11319 if (ret) 11320 return ret; 11321 11322 if (val == 1) { 11323 ret = t4_set_params(adap, adap->mbox, adap->pf, 0, 1, 11324 ¶m, &val); 11325 if (!ret) 11326 /* Firmware allows adding explicit TCAM entries. 11327 * Save this internally. 11328 */ 11329 adap->params.smac_add_support = 1; 11330 } 11331 11332 return ret; 11333 } 11334 11335 int t4_configure_ringbb(struct adapter *adap) 11336 { 11337 unsigned int param, val; 11338 int ret = 0; 11339 11340 param = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | 11341 V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_RING_BACKBONE)); 11342 /* Query FW to check if FW supports ring switch feature or not. 11343 * If FW returns 1, driver can use this feature and driver need to send 11344 * FW_PARAMS_PARAM_DEV_RING_BACKBONE write command with value 1 to 11345 * enable the ring backbone configuration. 11346 */ 11347 ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 1, ¶m, &val); 11348 if (ret < 0) { 11349 CH_ERR(adap, "Querying FW using Ring backbone params command failed, err=%d\n", 11350 ret); 11351 goto out; 11352 } 11353 11354 if (val != 1) { 11355 CH_ERR(adap, "FW doesnot support ringbackbone features\n"); 11356 goto out; 11357 } 11358 11359 ret = t4_set_params(adap, adap->mbox, adap->pf, 0, 1, ¶m, &val); 11360 if (ret < 0) { 11361 CH_ERR(adap, "Could not set Ringbackbone, err= %d\n", 11362 ret); 11363 goto out; 11364 } 11365 11366 out: 11367 return ret; 11368 } 11369 11370 /* 11371 * t4_set_vlan_acl - Set a VLAN id for the specified VF 11372 * @adapter: the adapter 11373 * @mbox: mailbox to use for the FW command 11374 * @vf: one of the VFs instantiated by the specified PF 11375 * @vlan: The vlanid to be set 11376 * 11377 */ 11378 int t4_set_vlan_acl(struct adapter *adap, unsigned int mbox, unsigned int vf, 11379 u16 vlan) 11380 { 11381 struct fw_acl_vlan_cmd vlan_cmd; 11382 unsigned int enable; 11383 11384 enable = (vlan ? F_FW_ACL_VLAN_CMD_EN : 0); 11385 memset(&vlan_cmd, 0, sizeof(vlan_cmd)); 11386 vlan_cmd.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_ACL_VLAN_CMD) | 11387 F_FW_CMD_REQUEST | 11388 F_FW_CMD_WRITE | 11389 F_FW_CMD_EXEC | 11390 V_FW_ACL_VLAN_CMD_PFN(adap->pf) | 11391 V_FW_ACL_VLAN_CMD_VFN(vf)); 11392 vlan_cmd.en_to_len16 = cpu_to_be32(enable | FW_LEN16(vlan_cmd)); 11393 /* Drop all packets that donot match vlan id */ 11394 vlan_cmd.dropnovlan_fm = (enable 11395 ? (F_FW_ACL_VLAN_CMD_DROPNOVLAN | 11396 F_FW_ACL_VLAN_CMD_FM) 11397 : 0); 11398 if (enable != 0) { 11399 vlan_cmd.nvlan = 1; 11400 vlan_cmd.vlanid[0] = cpu_to_be16(vlan); 11401 } 11402 11403 return t4_wr_mbox(adap, adap->mbox, &vlan_cmd, sizeof(vlan_cmd), NULL); 11404 } 11405 11406 /** 11407 * t4_del_mac - Removes the exact-match filter for a MAC address 11408 * @adap: the adapter 11409 * @mbox: mailbox to use for the FW command 11410 * @viid: the VI id 11411 * @addr: the MAC address value 11412 * @smac: if true, delete from only the smac region of MPS 11413 * 11414 * Modifies an exact-match filter and sets it to the new MAC address if 11415 * @idx >= 0, or adds the MAC address to a new filter if @idx < 0. In the 11416 * latter case the address is added persistently if @persist is %true. 11417 * 11418 * Returns a negative error number or the index of the filter with the new 11419 * MAC value. Note that this index may differ from @idx. 11420 */ 11421 int t4_del_mac(struct adapter *adap, unsigned int mbox, unsigned int viid, 11422 const u8 *addr, bool smac) 11423 { 11424 int ret; 11425 struct fw_vi_mac_cmd c; 11426 struct fw_vi_mac_exact *p = c.u.exact; 11427 unsigned int max_mac_addr = adap->chip_params->mps_tcam_size; 11428 11429 memset(&c, 0, sizeof(c)); 11430 c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_MAC_CMD) | 11431 F_FW_CMD_REQUEST | F_FW_CMD_WRITE | 11432 V_FW_VI_MAC_CMD_VIID(viid)); 11433 c.freemacs_to_len16 = cpu_to_be32( 11434 V_FW_CMD_LEN16(1) | 11435 (smac ? F_FW_VI_MAC_CMD_IS_SMAC : 0)); 11436 11437 memcpy(p->macaddr, addr, sizeof(p->macaddr)); 11438 p->valid_to_idx = cpu_to_be16( 11439 F_FW_VI_MAC_CMD_VALID | 11440 V_FW_VI_MAC_CMD_IDX(FW_VI_MAC_MAC_BASED_FREE)); 11441 11442 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); 11443 if (ret == 0) { 11444 ret = G_FW_VI_MAC_CMD_IDX(be16_to_cpu(p->valid_to_idx)); 11445 if (ret < max_mac_addr) 11446 return -ENOMEM; 11447 } 11448 11449 return ret; 11450 } 11451 11452 /** 11453 * t4_add_mac - Adds an exact-match filter for a MAC address 11454 * @adap: the adapter 11455 * @mbox: mailbox to use for the FW command 11456 * @viid: the VI id 11457 * @idx: index of existing filter for old value of MAC address, or -1 11458 * @addr: the new MAC address value 11459 * @persist: whether a new MAC allocation should be persistent 11460 * @add_smt: if true also add the address to the HW SMT 11461 * @smac: if true, update only the smac region of MPS 11462 * 11463 * Modifies an exact-match filter and sets it to the new MAC address if 11464 * @idx >= 0, or adds the MAC address to a new filter if @idx < 0. In the 11465 * latter case the address is added persistently if @persist is %true. 11466 * 11467 * Returns a negative error number or the index of the filter with the new 11468 * MAC value. Note that this index may differ from @idx. 11469 */ 11470 int t4_add_mac(struct adapter *adap, unsigned int mbox, unsigned int viid, 11471 int idx, const u8 *addr, bool persist, u8 *smt_idx, bool smac) 11472 { 11473 int ret, mode; 11474 struct fw_vi_mac_cmd c; 11475 struct fw_vi_mac_exact *p = c.u.exact; 11476 unsigned int max_mac_addr = adap->chip_params->mps_tcam_size; 11477 11478 if (idx < 0) /* new allocation */ 11479 idx = persist ? FW_VI_MAC_ADD_PERSIST_MAC : FW_VI_MAC_ADD_MAC; 11480 mode = smt_idx ? FW_VI_MAC_SMT_AND_MPSTCAM : FW_VI_MAC_MPS_TCAM_ENTRY; 11481 11482 memset(&c, 0, sizeof(c)); 11483 c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_MAC_CMD) | 11484 F_FW_CMD_REQUEST | F_FW_CMD_WRITE | 11485 V_FW_VI_MAC_CMD_VIID(viid)); 11486 c.freemacs_to_len16 = cpu_to_be32( 11487 V_FW_CMD_LEN16(1) | 11488 (smac ? F_FW_VI_MAC_CMD_IS_SMAC : 0)); 11489 p->valid_to_idx = cpu_to_be16(F_FW_VI_MAC_CMD_VALID | 11490 V_FW_VI_MAC_CMD_SMAC_RESULT(mode) | 11491 V_FW_VI_MAC_CMD_IDX(idx)); 11492 memcpy(p->macaddr, addr, sizeof(p->macaddr)); 11493 11494 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); 11495 if (ret == 0) { 11496 ret = G_FW_VI_MAC_CMD_IDX(be16_to_cpu(p->valid_to_idx)); 11497 if (ret >= max_mac_addr) 11498 return -ENOMEM; 11499 if (smt_idx) { 11500 /* Does fw supports returning smt_idx? */ 11501 if (adap->params.viid_smt_extn_support) 11502 *smt_idx = G_FW_VI_MAC_CMD_SMTID(be32_to_cpu(c.op_to_viid)); 11503 else { 11504 /* In T4/T5, SMT contains 256 SMAC entries 11505 * organized in 128 rows of 2 entries each. 11506 * In T6, SMT contains 256 SMAC entries in 11507 * 256 rows. 11508 */ 11509 if (chip_id(adap) <= CHELSIO_T5) 11510 *smt_idx = ((viid & M_FW_VIID_VIN) << 1); 11511 else 11512 *smt_idx = (viid & M_FW_VIID_VIN); 11513 } 11514 } 11515 } 11516 11517 return ret; 11518 } 11519