1 /*- 2 * Copyright (c) 2004-2005 Nate Lawson (SDG) 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 */ 26 27 #include <sys/cdefs.h> 28 __FBSDID("$FreeBSD$"); 29 30 #include <sys/param.h> 31 #include <sys/bus.h> 32 #include <sys/cpu.h> 33 #include <sys/kernel.h> 34 #include <sys/malloc.h> 35 #include <sys/module.h> 36 #include <sys/pcpu.h> 37 #include <sys/sysctl.h> 38 #include <sys/systm.h> 39 40 #include <dev/pci/pcivar.h> 41 #include <machine/bus.h> 42 #include <machine/resource.h> 43 #include <sys/rman.h> 44 45 #include "cpufreq_if.h" 46 47 /* 48 * The SpeedStep ICH feature is a chipset-initiated voltage and frequency 49 * transition available on the ICH2M, 3M, and 4M. It is different from 50 * the newer Pentium-M SpeedStep feature. It offers only two levels of 51 * frequency/voltage. Often, the BIOS will select one of the levels via 52 * SMM code during the power-on process (i.e., choose a lower level if the 53 * system is off AC power.) 54 */ 55 56 struct ichss_softc { 57 device_t dev; 58 int bm_rid; /* Bus-mastering control (PM2REG). */ 59 struct resource *bm_reg; 60 int ctrl_rid; /* Control/status register. */ 61 struct resource *ctrl_reg; 62 struct cf_setting sets[2]; /* Only two settings. */ 63 }; 64 65 /* Supported PCI IDs. */ 66 #define PCI_VENDOR_INTEL 0x8086 67 #define PCI_DEV_82801BA 0x244c /* ICH2M */ 68 #define PCI_DEV_82801CA 0x248c /* ICH3M */ 69 #define PCI_DEV_82801DB 0x24cc /* ICH4M */ 70 #define PCI_DEV_82815_MC 0x1130 /* Unsupported/buggy part */ 71 72 /* PCI config registers for finding PMBASE and enabling SpeedStep. */ 73 #define ICHSS_PMBASE_OFFSET 0x40 74 #define ICHSS_PMCFG_OFFSET 0xa0 75 76 /* Values and masks. */ 77 #define ICHSS_ENABLE (1<<3) /* Enable SpeedStep control. */ 78 #define ICHSS_IO_REG 0x1 /* Access register via I/O space. */ 79 #define ICHSS_PMBASE_MASK 0xff80 /* PMBASE address bits. */ 80 #define ICHSS_CTRL_BIT 0x1 /* 0 is high speed, 1 is low. */ 81 #define ICHSS_BM_DISABLE 0x1 82 83 /* Offsets from PMBASE for various registers. */ 84 #define ICHSS_BM_OFFSET 0x20 85 #define ICHSS_CTRL_OFFSET 0x50 86 87 #define ICH_GET_REG(reg) \ 88 (bus_space_read_1(rman_get_bustag((reg)), \ 89 rman_get_bushandle((reg)), 0)) 90 #define ICH_SET_REG(reg, val) \ 91 (bus_space_write_1(rman_get_bustag((reg)), \ 92 rman_get_bushandle((reg)), 0, (val))) 93 94 static void ichss_identify(driver_t *driver, device_t parent); 95 static int ichss_probe(device_t dev); 96 static int ichss_attach(device_t dev); 97 static int ichss_detach(device_t dev); 98 static int ichss_settings(device_t dev, struct cf_setting *sets, 99 int *count); 100 static int ichss_set(device_t dev, const struct cf_setting *set); 101 static int ichss_get(device_t dev, struct cf_setting *set); 102 static int ichss_type(device_t dev, int *type); 103 104 static device_method_t ichss_methods[] = { 105 /* Device interface */ 106 DEVMETHOD(device_identify, ichss_identify), 107 DEVMETHOD(device_probe, ichss_probe), 108 DEVMETHOD(device_attach, ichss_attach), 109 DEVMETHOD(device_detach, ichss_detach), 110 111 /* cpufreq interface */ 112 DEVMETHOD(cpufreq_drv_set, ichss_set), 113 DEVMETHOD(cpufreq_drv_get, ichss_get), 114 DEVMETHOD(cpufreq_drv_type, ichss_type), 115 DEVMETHOD(cpufreq_drv_settings, ichss_settings), 116 DEVMETHOD_END 117 }; 118 static driver_t ichss_driver = { 119 "ichss", ichss_methods, sizeof(struct ichss_softc) 120 }; 121 static devclass_t ichss_devclass; 122 DRIVER_MODULE(ichss, cpu, ichss_driver, ichss_devclass, 0, 0); 123 124 static device_t ich_device; 125 126 #if 0 127 #define DPRINT(x...) printf(x) 128 #else 129 #define DPRINT(x...) 130 #endif 131 132 static void 133 ichss_identify(driver_t *driver, device_t parent) 134 { 135 device_t child; 136 uint32_t pmbase; 137 138 if (resource_disabled("ichss", 0)) 139 return; 140 141 /* 142 * It appears that ICH SpeedStep only requires a single CPU to 143 * set the value (since the chipset is shared by all CPUs.) 144 * Thus, we only add a child to cpu 0. 145 */ 146 if (device_get_unit(parent) != 0) 147 return; 148 149 /* Avoid duplicates. */ 150 if (device_find_child(parent, "ichss", -1)) 151 return; 152 153 /* 154 * ICH2/3/4-M I/O Controller Hub is at bus 0, slot 1F, function 0. 155 * E.g. see Section 6.1 "PCI Devices and Functions" and table 6.1 of 156 * Intel(r) 82801BA I/O Controller Hub 2 (ICH2) and Intel(r) 82801BAM 157 * I/O Controller Hub 2 Mobile (ICH2-M). 158 */ 159 ich_device = pci_find_bsf(0, 0x1f, 0); 160 if (ich_device == NULL || 161 pci_get_vendor(ich_device) != PCI_VENDOR_INTEL || 162 (pci_get_device(ich_device) != PCI_DEV_82801BA && 163 pci_get_device(ich_device) != PCI_DEV_82801CA && 164 pci_get_device(ich_device) != PCI_DEV_82801DB)) 165 return; 166 167 /* 168 * Certain systems with ICH2 and an Intel 82815_MC host bridge 169 * where the host bridge's revision is < 5 lockup if SpeedStep 170 * is used. 171 */ 172 if (pci_get_device(ich_device) == PCI_DEV_82801BA) { 173 device_t hostb; 174 175 hostb = pci_find_bsf(0, 0, 0); 176 if (hostb != NULL && 177 pci_get_vendor(hostb) == PCI_VENDOR_INTEL && 178 pci_get_device(hostb) == PCI_DEV_82815_MC && 179 pci_get_revid(hostb) < 5) 180 return; 181 } 182 183 /* Find the PMBASE register from our PCI config header. */ 184 pmbase = pci_read_config(ich_device, ICHSS_PMBASE_OFFSET, 185 sizeof(pmbase)); 186 if ((pmbase & ICHSS_IO_REG) == 0) { 187 printf("ichss: invalid PMBASE memory type\n"); 188 return; 189 } 190 pmbase &= ICHSS_PMBASE_MASK; 191 if (pmbase == 0) { 192 printf("ichss: invalid zero PMBASE address\n"); 193 return; 194 } 195 DPRINT("ichss: PMBASE is %#x\n", pmbase); 196 197 child = BUS_ADD_CHILD(parent, 20, "ichss", 0); 198 if (child == NULL) { 199 device_printf(parent, "add SpeedStep child failed\n"); 200 return; 201 } 202 203 /* Add the bus master arbitration and control registers. */ 204 bus_set_resource(child, SYS_RES_IOPORT, 0, pmbase + ICHSS_BM_OFFSET, 205 1); 206 bus_set_resource(child, SYS_RES_IOPORT, 1, pmbase + ICHSS_CTRL_OFFSET, 207 1); 208 } 209 210 static int 211 ichss_probe(device_t dev) 212 { 213 device_t est_dev, perf_dev; 214 int error, type; 215 216 /* 217 * If the ACPI perf driver has attached and is not just offering 218 * info, let it manage things. Also, if Enhanced SpeedStep is 219 * available, don't attach. 220 */ 221 perf_dev = device_find_child(device_get_parent(dev), "acpi_perf", -1); 222 if (perf_dev && device_is_attached(perf_dev)) { 223 error = CPUFREQ_DRV_TYPE(perf_dev, &type); 224 if (error == 0 && (type & CPUFREQ_FLAG_INFO_ONLY) == 0) 225 return (ENXIO); 226 } 227 est_dev = device_find_child(device_get_parent(dev), "est", -1); 228 if (est_dev && device_is_attached(est_dev)) 229 return (ENXIO); 230 231 device_set_desc(dev, "SpeedStep ICH"); 232 return (-1000); 233 } 234 235 static int 236 ichss_attach(device_t dev) 237 { 238 struct ichss_softc *sc; 239 uint16_t ss_en; 240 241 sc = device_get_softc(dev); 242 sc->dev = dev; 243 244 sc->bm_rid = 0; 245 sc->bm_reg = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &sc->bm_rid, 246 RF_ACTIVE); 247 if (sc->bm_reg == NULL) { 248 device_printf(dev, "failed to alloc BM arb register\n"); 249 return (ENXIO); 250 } 251 sc->ctrl_rid = 1; 252 sc->ctrl_reg = bus_alloc_resource_any(dev, SYS_RES_IOPORT, 253 &sc->ctrl_rid, RF_ACTIVE); 254 if (sc->ctrl_reg == NULL) { 255 device_printf(dev, "failed to alloc control register\n"); 256 bus_release_resource(dev, SYS_RES_IOPORT, sc->bm_rid, 257 sc->bm_reg); 258 return (ENXIO); 259 } 260 261 /* Activate SpeedStep control if not already enabled. */ 262 ss_en = pci_read_config(ich_device, ICHSS_PMCFG_OFFSET, sizeof(ss_en)); 263 if ((ss_en & ICHSS_ENABLE) == 0) { 264 device_printf(dev, "enabling SpeedStep support\n"); 265 pci_write_config(ich_device, ICHSS_PMCFG_OFFSET, 266 ss_en | ICHSS_ENABLE, sizeof(ss_en)); 267 } 268 269 /* Setup some defaults for our exported settings. */ 270 sc->sets[0].freq = CPUFREQ_VAL_UNKNOWN; 271 sc->sets[0].volts = CPUFREQ_VAL_UNKNOWN; 272 sc->sets[0].power = CPUFREQ_VAL_UNKNOWN; 273 sc->sets[0].lat = 1000; 274 sc->sets[0].dev = dev; 275 sc->sets[1] = sc->sets[0]; 276 cpufreq_register(dev); 277 278 return (0); 279 } 280 281 static int 282 ichss_detach(device_t dev) 283 { 284 /* TODO: teardown BM and CTRL registers. */ 285 return (ENXIO); 286 } 287 288 static int 289 ichss_settings(device_t dev, struct cf_setting *sets, int *count) 290 { 291 struct ichss_softc *sc; 292 struct cf_setting set; 293 int first, i; 294 295 if (sets == NULL || count == NULL) 296 return (EINVAL); 297 if (*count < 2) { 298 *count = 2; 299 return (E2BIG); 300 } 301 sc = device_get_softc(dev); 302 303 /* 304 * Estimate frequencies for both levels, temporarily switching to 305 * the other one if we haven't calibrated it yet. 306 */ 307 ichss_get(dev, &set); 308 for (i = 0; i < 2; i++) { 309 if (sc->sets[i].freq == CPUFREQ_VAL_UNKNOWN) { 310 first = (i == 0) ? 1 : 0; 311 ichss_set(dev, &sc->sets[i]); 312 ichss_set(dev, &sc->sets[first]); 313 } 314 } 315 316 bcopy(sc->sets, sets, sizeof(sc->sets)); 317 *count = 2; 318 319 return (0); 320 } 321 322 static int 323 ichss_set(device_t dev, const struct cf_setting *set) 324 { 325 struct ichss_softc *sc; 326 uint8_t bmval, new_val, old_val, req_val; 327 uint64_t rate; 328 register_t regs; 329 330 /* Look up appropriate bit value based on frequency. */ 331 sc = device_get_softc(dev); 332 if (CPUFREQ_CMP(set->freq, sc->sets[0].freq)) 333 req_val = 0; 334 else if (CPUFREQ_CMP(set->freq, sc->sets[1].freq)) 335 req_val = ICHSS_CTRL_BIT; 336 else 337 return (EINVAL); 338 DPRINT("ichss: requested setting %d\n", req_val); 339 340 /* Disable interrupts and get the other register contents. */ 341 regs = intr_disable(); 342 old_val = ICH_GET_REG(sc->ctrl_reg) & ~ICHSS_CTRL_BIT; 343 344 /* 345 * Disable bus master arbitration, write the new value to the control 346 * register, and then re-enable bus master arbitration. 347 */ 348 bmval = ICH_GET_REG(sc->bm_reg) | ICHSS_BM_DISABLE; 349 ICH_SET_REG(sc->bm_reg, bmval); 350 ICH_SET_REG(sc->ctrl_reg, old_val | req_val); 351 ICH_SET_REG(sc->bm_reg, bmval & ~ICHSS_BM_DISABLE); 352 353 /* Get the new value and re-enable interrupts. */ 354 new_val = ICH_GET_REG(sc->ctrl_reg); 355 intr_restore(regs); 356 357 /* Check if the desired state was indeed selected. */ 358 if (req_val != (new_val & ICHSS_CTRL_BIT)) { 359 device_printf(sc->dev, "transition to %d failed\n", req_val); 360 return (ENXIO); 361 } 362 363 /* Re-initialize our cycle counter if we don't know this new state. */ 364 if (sc->sets[req_val].freq == CPUFREQ_VAL_UNKNOWN) { 365 cpu_est_clockrate(0, &rate); 366 sc->sets[req_val].freq = rate / 1000000; 367 DPRINT("ichss: set calibrated new rate of %d\n", 368 sc->sets[req_val].freq); 369 } 370 371 return (0); 372 } 373 374 static int 375 ichss_get(device_t dev, struct cf_setting *set) 376 { 377 struct ichss_softc *sc; 378 uint64_t rate; 379 uint8_t state; 380 381 sc = device_get_softc(dev); 382 state = ICH_GET_REG(sc->ctrl_reg) & ICHSS_CTRL_BIT; 383 384 /* If we haven't changed settings yet, estimate the current value. */ 385 if (sc->sets[state].freq == CPUFREQ_VAL_UNKNOWN) { 386 cpu_est_clockrate(0, &rate); 387 sc->sets[state].freq = rate / 1000000; 388 DPRINT("ichss: get calibrated new rate of %d\n", 389 sc->sets[state].freq); 390 } 391 *set = sc->sets[state]; 392 393 return (0); 394 } 395 396 static int 397 ichss_type(device_t dev, int *type) 398 { 399 400 if (type == NULL) 401 return (EINVAL); 402 403 *type = CPUFREQ_TYPE_ABSOLUTE; 404 return (0); 405 } 406