1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 2001 Michael Smith 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 * 28 * $FreeBSD$ 29 */ 30 31 /* 32 * CISS adapter driver datastructures 33 */ 34 35 typedef STAILQ_HEAD(, ciss_request) cr_qhead_t; 36 37 /************************************************************************ 38 * Tunable parameters 39 */ 40 41 /* 42 * There is no guaranteed upper bound on the number of concurrent 43 * commands an adapter may claim to support. Cap it at a reasonable 44 * value. 45 */ 46 #define CISS_MAX_REQUESTS 1024 47 48 /* 49 * Maximum number of logical drives we support. 50 * If the controller does not indicate a maximum 51 * value. This is a compatibiliy value to support 52 * older ciss controllers (e.g. model 6i) 53 */ 54 #define CISS_MAX_LOGICAL 16 55 56 /* 57 * Maximum number of physical devices we support. 58 */ 59 #define CISS_MAX_PHYSICAL 1024 60 61 /* 62 * Interrupt reduction can be controlled by tuning the interrupt 63 * coalesce delay and count parameters. The delay (in microseconds) 64 * defers delivery of interrupts to increase the chance of there being 65 * more than one completed command ready when the interrupt is 66 * delivered. The count expedites the delivery of the interrupt when 67 * the given number of commands are ready. 68 * 69 * If the delay is set to 0, interrupts are delivered immediately. 70 */ 71 #define CISS_INTERRUPT_COALESCE_DELAY 0 72 #define CISS_INTERRUPT_COALESCE_COUNT 16 73 74 /* 75 * Heartbeat routine timeout in seconds. Note that since event 76 * handling is performed on a callback basis, we don't need this to 77 * run very often. 78 */ 79 #define CISS_HEARTBEAT_RATE 10 80 81 /************************************************************************ 82 * Driver version. Only really significant to the ACU interface. 83 */ 84 #define CISS_DRIVER_VERSION 20011201 85 86 /************************************************************************ 87 * Driver data structures 88 */ 89 90 /* 91 * Each command issued to the adapter is managed by a request 92 * structure. 93 */ 94 struct ciss_request 95 { 96 STAILQ_ENTRY(ciss_request) cr_link; 97 int cr_onq; /* which queue we are on */ 98 99 struct ciss_softc *cr_sc; /* controller softc */ 100 void *cr_data; /* data buffer */ 101 u_int32_t cr_length; /* data length */ 102 bus_dmamap_t cr_datamap; /* DMA map for data */ 103 struct ciss_command *cr_cc; 104 uint32_t cr_ccphys; 105 int cr_tag; 106 int cr_flags; 107 #define CISS_REQ_MAPPED (1<<0) /* data mapped */ 108 #define CISS_REQ_SLEEP (1<<1) /* submitter sleeping */ 109 #define CISS_REQ_POLL (1<<2) /* submitter polling */ 110 #define CISS_REQ_DATAOUT (1<<3) /* data host->adapter */ 111 #define CISS_REQ_DATAIN (1<<4) /* data adapter->host */ 112 #define CISS_REQ_BUSY (1<<5) /* controller has req */ 113 #define CISS_REQ_CCB (1<<6) /* data is ccb */ 114 115 void (* cr_complete)(struct ciss_request *); 116 void *cr_private; 117 int cr_sg_tag; 118 #define CISS_SG_MAX ((CISS_SG_FETCH_MAX << 1) | 0x1) 119 #define CISS_SG_1 ((CISS_SG_FETCH_1 << 1) | 0x01) 120 #define CISS_SG_2 ((CISS_SG_FETCH_2 << 1) | 0x01) 121 #define CISS_SG_4 ((CISS_SG_FETCH_4 << 1) | 0x01) 122 #define CISS_SG_8 ((CISS_SG_FETCH_8 << 1) | 0x01) 123 #define CISS_SG_16 ((CISS_SG_FETCH_16 << 1) | 0x01) 124 #define CISS_SG_32 ((CISS_SG_FETCH_32 << 1) | 0x01) 125 #define CISS_SG_NONE ((CISS_SG_FETCH_NONE << 1) | 0x01) 126 }; 127 128 /* 129 * The adapter command structure is defined with a zero-length 130 * scatter/gather list size. In practise, we want space for a 131 * scatter-gather list, and we also want to avoid having commands 132 * cross page boundaries. 133 * 134 * The size of the ciss_command is 52 bytes. 65 s/g elements are reserved 135 * to allow a max i/o size of 256k. This gives a total command size of 136 * 1120 bytes, including the 32 byte alignment padding. Modern controllers 137 * seem to saturate nicely at this value. 138 */ 139 140 #define CISS_MAX_SG_ELEMENTS 65 141 #define CISS_COMMAND_ALIGN 32 142 #define CISS_COMMAND_SG_LENGTH (sizeof(struct ciss_sg_entry) * CISS_MAX_SG_ELEMENTS) 143 #define CISS_COMMAND_ALLOC_SIZE (roundup2(sizeof(struct ciss_command) + CISS_COMMAND_SG_LENGTH, CISS_COMMAND_ALIGN)) 144 145 /* 146 * Per-logical-drive data. 147 */ 148 struct ciss_ldrive 149 { 150 union ciss_device_address cl_address; 151 union ciss_device_address *cl_controller; 152 int cl_status; 153 #define CISS_LD_NONEXISTENT 0 154 #define CISS_LD_ONLINE 1 155 #define CISS_LD_OFFLINE 2 156 157 int cl_update; 158 159 struct ciss_bmic_id_ldrive *cl_ldrive; 160 struct ciss_bmic_id_lstatus *cl_lstatus; 161 struct ciss_ldrive_geometry cl_geometry; 162 163 char cl_name[16]; /* device name */ 164 }; 165 166 /* 167 * Per-physical-drive data 168 */ 169 struct ciss_pdrive 170 { 171 union ciss_device_address cp_address; 172 int cp_online; 173 }; 174 175 #define CISS_PHYSICAL_SHIFT 5 176 #define CISS_PHYSICAL_BASE (1 << CISS_PHYSICAL_SHIFT) 177 #define CISS_MAX_PHYSTGT 256 178 179 #define CISS_IS_PHYSICAL(bus) (bus >= CISS_PHYSICAL_BASE) 180 #define CISS_CAM_TO_PBUS(bus) (bus - CISS_PHYSICAL_BASE) 181 182 /* 183 * Per-adapter data 184 */ 185 struct ciss_softc 186 { 187 /* bus connections */ 188 device_t ciss_dev; /* bus attachment */ 189 struct cdev *ciss_dev_t; /* control device */ 190 191 struct resource *ciss_regs_resource; /* register interface window */ 192 int ciss_regs_rid; /* resource ID */ 193 bus_space_handle_t ciss_regs_bhandle; /* bus space handle */ 194 bus_space_tag_t ciss_regs_btag; /* bus space tag */ 195 196 struct resource *ciss_cfg_resource; /* config struct interface window */ 197 int ciss_cfg_rid; /* resource ID */ 198 struct ciss_config_table *ciss_cfg; /* config table in adapter memory */ 199 struct ciss_perf_config *ciss_perf; /* config table for the performant */ 200 struct ciss_bmic_id_table *ciss_id; /* ID table in host memory */ 201 u_int32_t ciss_heartbeat; /* last heartbeat value */ 202 int ciss_heart_attack; /* number of times we have seen this value */ 203 204 int ciss_msi; 205 struct resource *ciss_irq_resource; /* interrupt */ 206 int ciss_irq_rid[CISS_MSI_COUNT]; /* resource ID */ 207 void *ciss_intr; /* interrupt handle */ 208 209 bus_dma_tag_t ciss_parent_dmat; /* parent DMA tag */ 210 bus_dma_tag_t ciss_buffer_dmat; /* data buffer/command DMA tag */ 211 212 u_int32_t ciss_interrupt_mask; /* controller interrupt mask bits */ 213 214 uint64_t *ciss_reply; 215 int ciss_cycle; 216 int ciss_rqidx; 217 bus_dma_tag_t ciss_reply_dmat; 218 bus_dmamap_t ciss_reply_map; 219 uint32_t ciss_reply_phys; 220 221 int ciss_max_requests; 222 struct ciss_request ciss_request[CISS_MAX_REQUESTS]; /* requests */ 223 void *ciss_command; /* command structures */ 224 bus_dma_tag_t ciss_command_dmat; /* command DMA tag */ 225 bus_dmamap_t ciss_command_map; /* command DMA map */ 226 u_int32_t ciss_command_phys; /* command array base address */ 227 cr_qhead_t ciss_free; /* requests available for reuse */ 228 cr_qhead_t ciss_notify; /* requests which are defered for processing */ 229 struct proc *ciss_notify_thread; 230 231 struct callout ciss_periodic; /* periodic event handling */ 232 struct ciss_request *ciss_periodic_notify; /* notify callback request */ 233 234 struct mtx ciss_mtx; 235 struct ciss_ldrive **ciss_logical; 236 struct ciss_pdrive **ciss_physical; 237 union ciss_device_address *ciss_controllers; /* controller address */ 238 int ciss_max_bus_number; /* maximum bus number */ 239 int ciss_max_logical_bus; 240 int ciss_max_physical_bus; 241 242 struct cam_devq *ciss_cam_devq; 243 struct cam_sim **ciss_cam_sim; 244 245 int ciss_soft_reset; 246 247 int ciss_flags; 248 #define CISS_FLAG_NOTIFY_OK (1<<0) /* notify command running OK */ 249 #define CISS_FLAG_CONTROL_OPEN (1<<1) /* control device is open */ 250 #define CISS_FLAG_ABORTING (1<<2) /* driver is going away */ 251 #define CISS_FLAG_RUNNING (1<<3) /* driver is running (interrupts usable) */ 252 #define CISS_FLAG_BUSY (1<<4) /* no free commands */ 253 254 #define CISS_FLAG_FAKE_SYNCH (1<<16) /* needs SYNCHRONISE_CACHE faked */ 255 #define CISS_FLAG_BMIC_ABORT (1<<17) /* use BMIC command to abort Notify on Event */ 256 #define CISS_FLAG_THREAD_SHUT (1<<20) /* shutdown the kthread */ 257 258 struct ciss_qstat ciss_qstat[CISSQ_COUNT]; /* queue statistics */ 259 }; 260 261 /************************************************************************ 262 * Debugging/diagnostic output. 263 */ 264 265 /* 266 * Debugging levels: 267 * 0 - quiet, only emit warnings 268 * 1 - talkative, log major events, but nothing on the I/O path 269 * 2 - noisy, log events on the I/O path 270 * 3 - extremely noisy, log items in loops 271 */ 272 #ifdef CISS_DEBUG 273 # define debug(level, fmt, args...) \ 274 do { \ 275 if (level <= CISS_DEBUG) printf("%s: " fmt "\n", __func__ , ##args); \ 276 } while(0) 277 # define debug_called(level) \ 278 do { \ 279 if (level <= CISS_DEBUG) printf("%s: called\n", __func__); \ 280 } while(0) 281 # define debug_struct(s) printf(" SIZE %s: %zu\n", #s, sizeof(struct s)) 282 # define debug_union(s) printf(" SIZE %s: %zu\n", #s, sizeof(union s)) 283 # define debug_type(s) printf(" SIZE %s: %zu\n", #s, sizeof(s)) 284 # define debug_field(s, f) printf(" OFFSET %s.%s: %d\n", #s, #f, ((int)&(((struct s *)0)->f))) 285 # define debug_const(c) printf(" CONST %s %jd/0x%jx\n", #c, (intmax_t)c, (intmax_t)c); 286 #else 287 # define debug(level, fmt, args...) 288 # define debug_called(level) 289 # define debug_struct(s) 290 # define debug_union(s) 291 # define debug_type(s) 292 # define debug_field(s, f) 293 # define debug_const(c) 294 #endif 295 296 #define ciss_printf(sc, fmt, args...) device_printf(sc->ciss_dev, fmt , ##args) 297 298 /************************************************************************ 299 * Queue primitives 300 */ 301 302 #define CISSQ_ADD(sc, qname) \ 303 do { \ 304 struct ciss_qstat *qs = &(sc)->ciss_qstat[qname]; \ 305 \ 306 qs->q_length++; \ 307 if (qs->q_length > qs->q_max) \ 308 qs->q_max = qs->q_length; \ 309 } while(0) 310 311 #define CISSQ_REMOVE(sc, qname) (sc)->ciss_qstat[qname].q_length-- 312 #define CISSQ_INIT(sc, qname) \ 313 do { \ 314 sc->ciss_qstat[qname].q_length = 0; \ 315 sc->ciss_qstat[qname].q_max = 0; \ 316 } while(0) 317 318 #define CISSQ_REQUEST_QUEUE(name, index) \ 319 static __inline void \ 320 ciss_initq_ ## name (struct ciss_softc *sc) \ 321 { \ 322 STAILQ_INIT(&sc->ciss_ ## name); \ 323 CISSQ_INIT(sc, index); \ 324 } \ 325 static __inline void \ 326 ciss_enqueue_ ## name (struct ciss_request *cr) \ 327 { \ 328 \ 329 STAILQ_INSERT_TAIL(&cr->cr_sc->ciss_ ## name, cr, cr_link); \ 330 CISSQ_ADD(cr->cr_sc, index); \ 331 cr->cr_onq = index; \ 332 } \ 333 static __inline void \ 334 ciss_requeue_ ## name (struct ciss_request *cr) \ 335 { \ 336 \ 337 STAILQ_INSERT_HEAD(&cr->cr_sc->ciss_ ## name, cr, cr_link); \ 338 CISSQ_ADD(cr->cr_sc, index); \ 339 cr->cr_onq = index; \ 340 } \ 341 static __inline struct ciss_request * \ 342 ciss_dequeue_ ## name (struct ciss_softc *sc) \ 343 { \ 344 struct ciss_request *cr; \ 345 \ 346 if ((cr = STAILQ_FIRST(&sc->ciss_ ## name)) != NULL) { \ 347 STAILQ_REMOVE_HEAD(&sc->ciss_ ## name, cr_link); \ 348 CISSQ_REMOVE(sc, index); \ 349 cr->cr_onq = -1; \ 350 } \ 351 return(cr); \ 352 } \ 353 struct hack 354 355 CISSQ_REQUEST_QUEUE(free, CISSQ_FREE); 356 CISSQ_REQUEST_QUEUE(notify, CISSQ_NOTIFY); 357 358 static __inline void 359 ciss_enqueue_complete(struct ciss_request *ac, cr_qhead_t *head) 360 { 361 362 STAILQ_INSERT_TAIL(head, ac, cr_link); 363 } 364 365 static __inline struct ciss_request * 366 ciss_dequeue_complete(struct ciss_softc *sc, cr_qhead_t *head) 367 { 368 struct ciss_request *ac; 369 370 if ((ac = STAILQ_FIRST(head)) != NULL) 371 STAILQ_REMOVE_HEAD(head, cr_link); 372 return(ac); 373 } 374 375 /******************************************************************************** 376 * space-fill a character string 377 */ 378 static __inline void 379 padstr(char *targ, const char *src, int len) 380 { 381 while (len-- > 0) { 382 if (*src != 0) { 383 *targ++ = *src++; 384 } else { 385 *targ++ = ' '; 386 } 387 } 388 } 389 390 #define ciss_report_request(a, b, c) \ 391 _ciss_report_request(a, b, c, __FUNCTION__) 392