1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 2001 Michael Smith 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29 /* 30 * CISS adapter driver datastructures 31 */ 32 33 typedef STAILQ_HEAD(, ciss_request) cr_qhead_t; 34 35 /************************************************************************ 36 * Tunable parameters 37 */ 38 39 /* 40 * There is no guaranteed upper bound on the number of concurrent 41 * commands an adapter may claim to support. Cap it at a reasonable 42 * value. 43 */ 44 #define CISS_MAX_REQUESTS 1024 45 46 /* 47 * Maximum number of logical drives we support. 48 * If the controller does not indicate a maximum 49 * value. This is a compatibiliy value to support 50 * older ciss controllers (e.g. model 6i) 51 */ 52 #define CISS_MAX_LOGICAL 16 53 54 /* 55 * Maximum number of physical devices we support. 56 */ 57 #define CISS_MAX_PHYSICAL 1024 58 59 /* 60 * Interrupt reduction can be controlled by tuning the interrupt 61 * coalesce delay and count parameters. The delay (in microseconds) 62 * defers delivery of interrupts to increase the chance of there being 63 * more than one completed command ready when the interrupt is 64 * delivered. The count expedites the delivery of the interrupt when 65 * the given number of commands are ready. 66 * 67 * If the delay is set to 0, interrupts are delivered immediately. 68 */ 69 #define CISS_INTERRUPT_COALESCE_DELAY 0 70 #define CISS_INTERRUPT_COALESCE_COUNT 16 71 72 /* 73 * Heartbeat routine timeout in seconds. Note that since event 74 * handling is performed on a callback basis, we don't need this to 75 * run very often. 76 */ 77 #define CISS_HEARTBEAT_RATE 10 78 79 /************************************************************************ 80 * Driver version. Only really significant to the ACU interface. 81 */ 82 #define CISS_DRIVER_VERSION 20011201 83 84 /************************************************************************ 85 * Driver data structures 86 */ 87 88 /* 89 * Each command issued to the adapter is managed by a request 90 * structure. 91 */ 92 struct ciss_request 93 { 94 STAILQ_ENTRY(ciss_request) cr_link; 95 int cr_onq; /* which queue we are on */ 96 97 struct ciss_softc *cr_sc; /* controller softc */ 98 void *cr_data; /* data buffer */ 99 u_int32_t cr_length; /* data length */ 100 bus_dmamap_t cr_datamap; /* DMA map for data */ 101 struct ciss_command *cr_cc; 102 uint32_t cr_ccphys; 103 int cr_tag; 104 int cr_flags; 105 #define CISS_REQ_MAPPED (1<<0) /* data mapped */ 106 #define CISS_REQ_SLEEP (1<<1) /* submitter sleeping */ 107 #define CISS_REQ_POLL (1<<2) /* submitter polling */ 108 #define CISS_REQ_DATAOUT (1<<3) /* data host->adapter */ 109 #define CISS_REQ_DATAIN (1<<4) /* data adapter->host */ 110 #define CISS_REQ_BUSY (1<<5) /* controller has req */ 111 #define CISS_REQ_CCB (1<<6) /* data is ccb */ 112 113 void (* cr_complete)(struct ciss_request *); 114 void *cr_private; 115 int cr_sg_tag; 116 #define CISS_SG_MAX ((CISS_SG_FETCH_MAX << 1) | 0x1) 117 #define CISS_SG_1 ((CISS_SG_FETCH_1 << 1) | 0x01) 118 #define CISS_SG_2 ((CISS_SG_FETCH_2 << 1) | 0x01) 119 #define CISS_SG_4 ((CISS_SG_FETCH_4 << 1) | 0x01) 120 #define CISS_SG_8 ((CISS_SG_FETCH_8 << 1) | 0x01) 121 #define CISS_SG_16 ((CISS_SG_FETCH_16 << 1) | 0x01) 122 #define CISS_SG_32 ((CISS_SG_FETCH_32 << 1) | 0x01) 123 #define CISS_SG_NONE ((CISS_SG_FETCH_NONE << 1) | 0x01) 124 }; 125 126 /* 127 * The adapter command structure is defined with a zero-length 128 * scatter/gather list size. In practise, we want space for a 129 * scatter-gather list, and we also want to avoid having commands 130 * cross page boundaries. 131 * 132 * The size of the ciss_command is 52 bytes. 65 s/g elements are reserved 133 * to allow a max i/o size of 256k. This gives a total command size of 134 * 1120 bytes, including the 32 byte alignment padding. Modern controllers 135 * seem to saturate nicely at this value. 136 */ 137 138 #define CISS_MAX_SG_ELEMENTS 65 139 #define CISS_COMMAND_ALIGN 32 140 #define CISS_COMMAND_SG_LENGTH (sizeof(struct ciss_sg_entry) * CISS_MAX_SG_ELEMENTS) 141 #define CISS_COMMAND_ALLOC_SIZE (roundup2(sizeof(struct ciss_command) + CISS_COMMAND_SG_LENGTH, CISS_COMMAND_ALIGN)) 142 143 /* 144 * Per-logical-drive data. 145 */ 146 struct ciss_ldrive 147 { 148 union ciss_device_address cl_address; 149 union ciss_device_address *cl_controller; 150 int cl_status; 151 #define CISS_LD_NONEXISTENT 0 152 #define CISS_LD_ONLINE 1 153 #define CISS_LD_OFFLINE 2 154 155 int cl_update; 156 157 struct ciss_bmic_id_ldrive *cl_ldrive; 158 struct ciss_bmic_id_lstatus *cl_lstatus; 159 struct ciss_ldrive_geometry cl_geometry; 160 161 char cl_name[16]; /* device name */ 162 }; 163 164 /* 165 * Per-physical-drive data 166 */ 167 struct ciss_pdrive 168 { 169 union ciss_device_address cp_address; 170 int cp_online; 171 }; 172 173 #define CISS_PHYSICAL_SHIFT 5 174 #define CISS_PHYSICAL_BASE (1 << CISS_PHYSICAL_SHIFT) 175 #define CISS_MAX_PHYSTGT 256 176 177 #define CISS_IS_PHYSICAL(bus) (bus >= CISS_PHYSICAL_BASE) 178 #define CISS_CAM_TO_PBUS(bus) (bus - CISS_PHYSICAL_BASE) 179 180 /* 181 * Per-adapter data 182 */ 183 struct ciss_softc 184 { 185 /* bus connections */ 186 device_t ciss_dev; /* bus attachment */ 187 struct cdev *ciss_dev_t; /* control device */ 188 189 struct resource *ciss_regs_resource; /* register interface window */ 190 int ciss_regs_rid; /* resource ID */ 191 bus_space_handle_t ciss_regs_bhandle; /* bus space handle */ 192 bus_space_tag_t ciss_regs_btag; /* bus space tag */ 193 194 struct resource *ciss_cfg_resource; /* config struct interface window */ 195 int ciss_cfg_rid; /* resource ID */ 196 struct ciss_config_table *ciss_cfg; /* config table in adapter memory */ 197 struct ciss_perf_config *ciss_perf; /* config table for the performant */ 198 struct ciss_bmic_id_table *ciss_id; /* ID table in host memory */ 199 u_int32_t ciss_heartbeat; /* last heartbeat value */ 200 int ciss_heart_attack; /* number of times we have seen this value */ 201 202 int ciss_msi; 203 struct resource *ciss_irq_resource; /* interrupt */ 204 int ciss_irq_rid[CISS_MSI_COUNT]; /* resource ID */ 205 void *ciss_intr; /* interrupt handle */ 206 207 bus_dma_tag_t ciss_parent_dmat; /* parent DMA tag */ 208 bus_dma_tag_t ciss_buffer_dmat; /* data buffer/command DMA tag */ 209 210 u_int32_t ciss_interrupt_mask; /* controller interrupt mask bits */ 211 212 uint64_t *ciss_reply; 213 int ciss_cycle; 214 int ciss_rqidx; 215 bus_dma_tag_t ciss_reply_dmat; 216 bus_dmamap_t ciss_reply_map; 217 uint32_t ciss_reply_phys; 218 219 int ciss_max_requests; 220 struct ciss_request ciss_request[CISS_MAX_REQUESTS]; /* requests */ 221 void *ciss_command; /* command structures */ 222 bus_dma_tag_t ciss_command_dmat; /* command DMA tag */ 223 bus_dmamap_t ciss_command_map; /* command DMA map */ 224 u_int32_t ciss_command_phys; /* command array base address */ 225 cr_qhead_t ciss_free; /* requests available for reuse */ 226 cr_qhead_t ciss_notify; /* requests which are defered for processing */ 227 struct proc *ciss_notify_thread; 228 229 struct callout ciss_periodic; /* periodic event handling */ 230 struct ciss_request *ciss_periodic_notify; /* notify callback request */ 231 232 struct mtx ciss_mtx; 233 struct ciss_ldrive **ciss_logical; 234 struct ciss_pdrive **ciss_physical; 235 union ciss_device_address *ciss_controllers; /* controller address */ 236 int ciss_max_bus_number; /* maximum bus number */ 237 int ciss_max_logical_bus; 238 int ciss_max_physical_bus; 239 240 struct cam_devq *ciss_cam_devq; 241 struct cam_sim **ciss_cam_sim; 242 243 int ciss_soft_reset; 244 245 int ciss_flags; 246 #define CISS_FLAG_NOTIFY_OK (1<<0) /* notify command running OK */ 247 #define CISS_FLAG_CONTROL_OPEN (1<<1) /* control device is open */ 248 #define CISS_FLAG_ABORTING (1<<2) /* driver is going away */ 249 #define CISS_FLAG_RUNNING (1<<3) /* driver is running (interrupts usable) */ 250 #define CISS_FLAG_BUSY (1<<4) /* no free commands */ 251 252 #define CISS_FLAG_FAKE_SYNCH (1<<16) /* needs SYNCHRONISE_CACHE faked */ 253 #define CISS_FLAG_BMIC_ABORT (1<<17) /* use BMIC command to abort Notify on Event */ 254 #define CISS_FLAG_THREAD_SHUT (1<<20) /* shutdown the kthread */ 255 256 struct ciss_qstat ciss_qstat[CISSQ_COUNT]; /* queue statistics */ 257 }; 258 259 /************************************************************************ 260 * Debugging/diagnostic output. 261 */ 262 263 /* 264 * Debugging levels: 265 * 0 - quiet, only emit warnings 266 * 1 - talkative, log major events, but nothing on the I/O path 267 * 2 - noisy, log events on the I/O path 268 * 3 - extremely noisy, log items in loops 269 */ 270 #ifdef CISS_DEBUG 271 # define debug(level, fmt, args...) \ 272 do { \ 273 if (level <= CISS_DEBUG) printf("%s: " fmt "\n", __func__ , ##args); \ 274 } while(0) 275 # define debug_called(level) \ 276 do { \ 277 if (level <= CISS_DEBUG) printf("%s: called\n", __func__); \ 278 } while(0) 279 # define debug_struct(s) printf(" SIZE %s: %zu\n", #s, sizeof(struct s)) 280 # define debug_union(s) printf(" SIZE %s: %zu\n", #s, sizeof(union s)) 281 # define debug_type(s) printf(" SIZE %s: %zu\n", #s, sizeof(s)) 282 # define debug_field(s, f) printf(" OFFSET %s.%s: %d\n", #s, #f, ((int)&(((struct s *)0)->f))) 283 # define debug_const(c) printf(" CONST %s %jd/0x%jx\n", #c, (intmax_t)c, (intmax_t)c); 284 #else 285 # define debug(level, fmt, args...) 286 # define debug_called(level) 287 # define debug_struct(s) 288 # define debug_union(s) 289 # define debug_type(s) 290 # define debug_field(s, f) 291 # define debug_const(c) 292 #endif 293 294 #define ciss_printf(sc, fmt, args...) device_printf(sc->ciss_dev, fmt , ##args) 295 296 /************************************************************************ 297 * Queue primitives 298 */ 299 300 #define CISSQ_ADD(sc, qname) \ 301 do { \ 302 struct ciss_qstat *qs = &(sc)->ciss_qstat[qname]; \ 303 \ 304 qs->q_length++; \ 305 if (qs->q_length > qs->q_max) \ 306 qs->q_max = qs->q_length; \ 307 } while(0) 308 309 #define CISSQ_REMOVE(sc, qname) (sc)->ciss_qstat[qname].q_length-- 310 #define CISSQ_INIT(sc, qname) \ 311 do { \ 312 sc->ciss_qstat[qname].q_length = 0; \ 313 sc->ciss_qstat[qname].q_max = 0; \ 314 } while(0) 315 316 #define CISSQ_REQUEST_QUEUE(name, index) \ 317 static __inline void \ 318 ciss_initq_ ## name (struct ciss_softc *sc) \ 319 { \ 320 STAILQ_INIT(&sc->ciss_ ## name); \ 321 CISSQ_INIT(sc, index); \ 322 } \ 323 static __inline void \ 324 ciss_enqueue_ ## name (struct ciss_request *cr) \ 325 { \ 326 \ 327 STAILQ_INSERT_TAIL(&cr->cr_sc->ciss_ ## name, cr, cr_link); \ 328 CISSQ_ADD(cr->cr_sc, index); \ 329 cr->cr_onq = index; \ 330 } \ 331 static __inline void \ 332 ciss_requeue_ ## name (struct ciss_request *cr) \ 333 { \ 334 \ 335 STAILQ_INSERT_HEAD(&cr->cr_sc->ciss_ ## name, cr, cr_link); \ 336 CISSQ_ADD(cr->cr_sc, index); \ 337 cr->cr_onq = index; \ 338 } \ 339 static __inline struct ciss_request * \ 340 ciss_dequeue_ ## name (struct ciss_softc *sc) \ 341 { \ 342 struct ciss_request *cr; \ 343 \ 344 if ((cr = STAILQ_FIRST(&sc->ciss_ ## name)) != NULL) { \ 345 STAILQ_REMOVE_HEAD(&sc->ciss_ ## name, cr_link); \ 346 CISSQ_REMOVE(sc, index); \ 347 cr->cr_onq = -1; \ 348 } \ 349 return(cr); \ 350 } \ 351 struct hack 352 353 CISSQ_REQUEST_QUEUE(free, CISSQ_FREE); 354 CISSQ_REQUEST_QUEUE(notify, CISSQ_NOTIFY); 355 356 static __inline void 357 ciss_enqueue_complete(struct ciss_request *ac, cr_qhead_t *head) 358 { 359 360 STAILQ_INSERT_TAIL(head, ac, cr_link); 361 } 362 363 static __inline struct ciss_request * 364 ciss_dequeue_complete(struct ciss_softc *sc, cr_qhead_t *head) 365 { 366 struct ciss_request *ac; 367 368 if ((ac = STAILQ_FIRST(head)) != NULL) 369 STAILQ_REMOVE_HEAD(head, cr_link); 370 return(ac); 371 } 372 373 /******************************************************************************** 374 * space-fill a character string 375 */ 376 static __inline void 377 padstr(char *targ, const char *src, int len) 378 { 379 while (len-- > 0) { 380 if (*src != 0) { 381 *targ++ = *src++; 382 } else { 383 *targ++ = ' '; 384 } 385 } 386 } 387 388 #define ciss_report_request(a, b, c) \ 389 _ciss_report_request(a, b, c, __FUNCTION__) 390