xref: /freebsd/sys/dev/ciss/cissreg.h (revision 63dab8eed99114670445270e26cf7193fe55e0fa)
1 /*-
2  * Copyright (c) 2001 Michael Smith
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  *
14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24  * SUCH DAMAGE.
25  *
26  *	$FreeBSD$
27  */
28 
29 /*
30  * Structure and I/O definitions for the Command Interface for SCSI-3 Support.
31  *
32  * Data in command CDBs are in big-endian format.  All other data is little-endian.
33  * This header only supports little-endian hosts at this time.
34  */
35 
36 union ciss_device_address
37 {
38     struct 				/* MODE_PERIPHERAL and MODE_MASK_PERIPHERAL */
39     {
40 	u_int32_t	target:24;	/* SCSI target */
41 	u_int32_t	bus:6;		/* SCSI bus */
42 	u_int32_t	mode:2;		/* CISS_HDR_ADDRESS_MODE_* */
43 	u_int32_t	extra_address;	/* SCSI-3 level-2 and level-3 address bytes */
44     } physical;
45     struct 				/* MODE_LOGICAL */
46     {
47 	u_int32_t	lun:30;		/* logical device ID */
48 	u_int32_t	mode:2;		/* CISS_HDR_ADDRESS_MODE_LOGICAL */
49 	u_int32_t	:32;		/* reserved */
50     } logical;
51     struct
52     {
53 	u_int32_t	:30;
54 	u_int32_t	mode:2;
55 	u_int32_t	:32;
56     } mode;
57 };
58 #define CISS_HDR_ADDRESS_MODE_PERIPHERAL	0x0
59 #define CISS_HDR_ADDRESS_MODE_LOGICAL		0x1
60 #define CISS_HDR_ADDRESS_MODE_MASK_PERIPHERAL	0x3
61 
62 #define CISS_EXTRA_MODE2(extra)		((extra & 0xc0000000) >> 30)
63 #define CISS_EXTRA_BUS2(extra)		((extra & 0x3f000000) >> 24)
64 #define CISS_EXTRA_TARGET2(extra)	((extra & 0x00ff0000) >> 16)
65 #define CISS_EXTRA_MODE3(extra)		((extra & 0x0000c000) >> 14)
66 #define CISS_EXTRA_BUS3(extra)		((extra & 0x00003f00) >> 8)
67 #define CISS_EXTRA_TARGET3(extra)	((extra & 0x000000ff))
68 
69 struct ciss_header
70 {
71     u_int8_t	:8;			/* reserved */
72     u_int8_t	sg_in_list;		/* SG's in the command structure */
73     u_int16_t	sg_total;		/* total count of SGs for this command */
74     u_int32_t	host_tag;		/* host identifier, bits 0&1 must be clear */
75 #define CISS_HDR_HOST_TAG_ERROR	(1<<1)
76     u_int32_t	host_tag_zeroes;	/* tag is 64 bits, but interface only supports 32 */
77     union ciss_device_address address;
78 } __packed;
79 
80 struct ciss_cdb
81 {
82     u_int8_t	cdb_length;		/* valid CDB bytes */
83     u_int8_t	type:3;
84 #define CISS_CDB_TYPE_COMMAND			0
85 #define CISS_CDB_TYPE_MESSAGE			1
86     u_int8_t	attribute:3;
87 #define CISS_CDB_ATTRIBUTE_UNTAGGED		0
88 #define CISS_CDB_ATTRIBUTE_SIMPLE		4
89 #define CISS_CDB_ATTRIBUTE_HEAD_OF_QUEUE	5
90 #define CISS_CDB_ATTRIBUTE_ORDERED		6
91 #define CISS_CDB_ATTRIBUTE_AUTO_CONTINGENT	7
92     u_int8_t	direction:2;
93 #define CISS_CDB_DIRECTION_NONE			0
94 #define CISS_CDB_DIRECTION_WRITE		1
95 #define CISS_CDB_DIRECTION_READ			2
96     u_int16_t	timeout;		/* seconds */
97 #define CISS_CDB_BUFFER_SIZE	16
98     u_int8_t	cdb[CISS_CDB_BUFFER_SIZE];
99 } __packed;
100 
101 struct ciss_error_info_pointer
102 {
103     u_int64_t	error_info_address;	/* points to ciss_error_info structure */
104     u_int32_t	error_info_length;
105 } __packed;
106 
107 struct ciss_error_info
108 {
109     u_int8_t	scsi_status;
110 #define CISS_SCSI_STATUS_GOOD			0x00	/* these are scsi-standard values */
111 #define CISS_SCSI_STATUS_CHECK_CONDITION	0x02
112 #define CISS_SCSI_STATUS_CONDITION_MET		0x04
113 #define CISS_SCSI_STATUS_BUSY			0x08
114 #define CISS_SCSI_STATUS_INDETERMINATE		0x10
115 #define CISS_SCSI_STATUS_INDETERMINATE_CM	0x14
116 #define CISS_SCSI_STATUS_RESERVATION_CONFLICT	0x18
117 #define CISS_SCSI_STATUS_COMMAND_TERMINATED	0x22
118 #define CISS_SCSI_STATUS_QUEUE_FULL		0x28
119 #define CISS_SCSI_STATUS_ACA_ACTIVE		0x30
120     u_int8_t	sense_length;
121     u_int16_t	command_status;
122 #define CISS_CMD_STATUS_SUCCESS			0
123 #define CISS_CMD_STATUS_TARGET_STATUS		1
124 #define CISS_CMD_STATUS_DATA_UNDERRUN		2
125 #define CISS_CMD_STATUS_DATA_OVERRUN		3
126 #define CISS_CMD_STATUS_INVALID_COMMAND		4
127 #define CISS_CMD_STATUS_PROTOCOL_ERROR		5
128 #define CISS_CMD_STATUS_HARDWARE_ERROR		6
129 #define CISS_CMD_STATUS_CONNECTION_LOST		7
130 #define CISS_CMD_STATUS_ABORTED			8
131 #define CISS_CMD_STATUS_ABORT_FAILED		9
132 #define CISS_CMD_STATUS_UNSOLICITED_ABORT	10
133 #define CISS_CMD_STATUS_TIMEOUT			11
134 #define CISS_CMD_STATUS_UNABORTABLE		12
135     u_int32_t	residual_count;
136     union {
137 	struct {
138 	    u_int8_t	res1[3];
139 	    u_int8_t	type;
140 	    u_int32_t	error_info;
141 	} __packed common_info;
142 	struct {
143 	    u_int8_t	res1[2];
144 	    u_int8_t	offense_size;
145 	    u_int8_t	offense_offset;
146 	    u_int32_t	offense_value;
147 	} __packed invalid_command;
148     } additional_error_info;
149     u_int8_t	sense_info[0];
150 } __packed;
151 
152 struct ciss_sg_entry
153 {
154     u_int64_t	address;
155 #define CISS_SG_ADDRESS_BITBUCKET	(~(u_int64_t)0)
156     u_int32_t	length;
157     u_int32_t	:31;
158     u_int32_t	extension:1;		/* address points to another s/g chain */
159 } __packed;
160 
161 struct ciss_command
162 {
163     struct ciss_header			header;
164     struct ciss_cdb			cdb;
165     struct ciss_error_info_pointer	error_info;
166     struct ciss_sg_entry		sg[0];
167 } __packed;
168 
169 #define CISS_OPCODE_REPORT_LOGICAL_LUNS		0xc2
170 #define CISS_OPCODE_REPORT_PHYSICAL_LUNS	0xc3
171 
172 struct ciss_lun_report
173 {
174     u_int32_t	list_size;		/* big-endian */
175     u_int32_t	:32;
176     union ciss_device_address lun[0];
177 } __packed;
178 
179 #define	CISS_VPD_LOGICAL_DRIVE_GEOMETRY		0xc1
180 struct ciss_ldrive_geometry
181 {
182     u_int8_t	periph_qualifier:3;
183     u_int8_t	periph_devtype:5;
184     u_int8_t	page_code;
185     u_int8_t	res1;
186     u_int8_t	page_length;
187     u_int16_t	cylinders;		/* big-endian */
188     u_int8_t	heads;
189     u_int8_t	sectors;
190     u_int8_t	fault_tolerance;
191     u_int8_t	res2[3];
192 } __attribute__ ((packed));
193 
194 struct ciss_report_cdb
195 {
196     u_int8_t	opcode;
197     u_int8_t	reserved[5];
198     u_int32_t	length;			/* big-endian */
199     u_int8_t	:8;
200     u_int8_t	control;
201 } __packed;
202 
203 /*
204  * Note that it's not clear whether we have to set the detail field to
205  * the tag of the command to be aborted, or the tag field in the command itself;
206  * documentation conflicts on this.
207  */
208 #define CISS_OPCODE_MESSAGE_ABORT		0x00
209 #define CISS_MESSAGE_ABORT_TASK			0x00
210 #define CISS_MESSAGE_ABORT_TASK_SET		0x01
211 #define CISS_MESSAGE_ABORT_CLEAR_ACA		0x02
212 #define CISS_MESSAGE_ABORT_CLEAR_TASK_SET	0x03
213 
214 #define CISS_OPCODE_MESSAGE_RESET		0x01
215 #define CISS_MESSAGE_RESET_CONTROLLER		0x00
216 #define CISS_MESSAGE_RESET_BUS			0x01
217 #define CISS_MESSAGE_RESET_TARGET		0x03
218 #define CISS_MESSAGE_RESET_LOGICAL_UNIT		0x04
219 
220 #define CISS_OPCODE_MESSAGE_SCAN		0x02
221 #define CISS_MESSAGE_SCAN_CONTROLLER		0x00
222 #define CISS_MESSAGE_SCAN_BUS			0x01
223 #define CISS_MESSAGE_SCAN_TARGET		0x03
224 #define CISS_MESSAGE_SCAN_LOGICAL_UNIT		0x04
225 
226 #define CISS_OPCODE_MESSAGE_NOP			0x03
227 
228 struct ciss_message_cdb
229 {
230     u_int8_t	opcode;
231     u_int8_t	type;
232     u_int16_t	:16;
233     u_int32_t	abort_tag;					/* XXX endianness? */
234     u_int8_t	reserved[8];
235 } __packed;
236 
237 /*
238  * CISS vendor-specific commands/messages.
239  *
240  * Note that while messages and vendor-specific commands are
241  * differentiated, they are handled in basically the same way and can
242  * be considered to be basically the same thing, as long as the cdb
243  * type field is set correctly.
244  */
245 #define CISS_OPCODE_READ		0xc0
246 #define CISS_OPCODE_WRITE		0xc1
247 #define CISS_COMMAND_NOTIFY_ON_EVENT	0xd0
248 #define CISS_COMMAND_ABORT_NOTIFY	0xd1
249 
250 struct ciss_notify_cdb
251 {
252     u_int8_t	opcode;
253     u_int8_t	command;
254     u_int8_t	res1[2];
255     u_int16_t	timeout;		/* seconds, little-endian */
256     u_int8_t	res2;			/* reserved */
257     u_int8_t	synchronous:1;		/* return immediately */
258     u_int8_t	ordered:1;		/* return events in recorded order */
259     u_int8_t	seek_to_oldest:1;	/* reset read counter to oldest event */
260     u_int8_t	new_only:1;		/* ignore any queued events */
261     u_int8_t	:4;
262     u_int32_t	length;			/* must be 512, little-endian */
263 #define CISS_NOTIFY_DATA_SIZE	512
264     u_int8_t	control;
265 } __packed;
266 
267 #define CISS_NOTIFY_NOTIFIER		0
268 #define CISS_NOTIFY_NOTIFIER_STATUS		0
269 #define CISS_NOTIFY_NOTIFIER_PROTOCOL		1
270 
271 #define CISS_NOTIFY_HOTPLUG		1
272 #define CISS_NOTIFY_HOTPLUG_PHYSICAL		0
273 #define CISS_NOTIFY_HOTPLUG_POWERSUPPLY		1
274 #define CISS_NOTIFY_HOTPLUG_FAN			2
275 #define CISS_NOTIFY_HOTPLUG_POWER		3
276 #define CISS_NOTIFY_HOTPLUG_REDUNDANT		4
277 #define CISS_NOTIFY_HOTPLUG_NONDISK		5
278 
279 #define CISS_NOTIFY_HARDWARE		2
280 #define CISS_NOTIFY_HARDWARE_CABLES		0
281 #define CISS_NOTIFY_HARDWARE_MEMORY		1
282 #define CISS_NOTIFY_HARDWARE_FAN		2
283 #define CISS_NOTIFY_HARDWARE_VRM		3
284 
285 #define CISS_NOTIFY_ENVIRONMENT		3
286 #define CISS_NOTIFY_ENVIRONMENT_TEMPERATURE	0
287 #define CISS_NOTIFY_ENVIRONMENT_POWERSUPPLY	1
288 #define CISS_NOTIFY_ENVIRONMENT_CHASSIS		2
289 #define CISS_NOTIFY_ENVIRONMENT_POWER		3
290 
291 #define CISS_NOTIFY_PHYSICAL		4
292 #define CISS_NOTIFY_PHYSICAL_STATE		0
293 
294 #define CISS_NOTIFY_LOGICAL		5
295 #define CISS_NOTIFY_LOGICAL_STATUS		0
296 #define CISS_NOTIFY_LOGICAL_ERROR		1
297 #define CISS_NOTIFY_LOGICAL_SURFACE		2
298 
299 #define CISS_NOTIFY_REDUNDANT		6
300 #define CISS_NOTIFY_REDUNDANT_STATUS		0
301 
302 #define CISS_NOTIFY_CISS		8
303 #define CISS_NOTIFY_CISS_REDUNDANT_CHANGE	0
304 #define CISS_NOTIFY_CISS_PATH_STATUS		1
305 #define CISS_NOTIFY_CISS_HARDWARE_ERROR		2
306 #define CISS_NOTIFY_CISS_LOGICAL		3
307 
308 struct ciss_notify_drive
309 {
310     u_int16_t	physical_drive_number;
311     u_int8_t	configured_drive_flag;
312     u_int8_t	spare_drive_flag;
313     u_int8_t	big_physical_drive_number;
314     u_int8_t	enclosure_bay_number;
315 } __packed;
316 
317 struct ciss_notify_locator
318 {
319     u_int16_t	port;
320     u_int16_t	id;
321     u_int16_t	box;
322 } __packed;
323 
324 struct ciss_notify_redundant_controller
325 {
326     u_int16_t	slot;
327 } __packed;
328 
329 struct ciss_notify_logical_status
330 {
331     u_int16_t	logical_drive;
332     u_int8_t	previous_state;
333     u_int8_t	new_state;
334     u_int8_t	spare_state;
335 } __packed;
336 
337 struct ciss_notify_rebuild_aborted
338 {
339     u_int16_t	logical_drive;
340     u_int8_t	replacement_drive;
341     u_int8_t	error_drive;
342     u_int8_t	big_replacement_drive;
343     u_int8_t	big_error_drive;
344 } __packed;
345 
346 struct ciss_notify_io_error
347 {
348     u_int16_t	logical_drive;
349     u_int32_t	lba;
350     u_int16_t	block_count;
351     u_int8_t	command;
352     u_int8_t	failure_bus;
353     u_int8_t	failure_drive;
354     u_int64_t	big_lba;
355 } __packed;
356 
357 struct ciss_notify_consistency_completed
358 {
359     u_int16_t	logical_drive;
360 } __packed;
361 
362 struct ciss_notify
363 {
364     u_int32_t	timestamp;		/* seconds since controller power-on */
365     u_int16_t	class;
366     u_int16_t	subclass;
367     u_int16_t	detail;
368     union
369     {
370 	struct ciss_notify_drive		drive;
371 	struct ciss_notify_locator		location;
372 	struct ciss_notify_redundant_controller	redundant_controller;
373 	struct ciss_notify_logical_status	logical_status;
374 	struct ciss_notify_rebuild_aborted	rebuild_aborted;
375 	struct ciss_notify_io_error		io_error;
376 	struct ciss_notify_consistency_completed consistency_completed;
377 	u_int8_t	data[64];
378     } data;
379     char	message[80];
380     u_int32_t	tag;
381     u_int16_t	date;
382     u_int16_t	year;
383     u_int32_t	time;
384     u_int16_t	pre_power_up_time;
385     union ciss_device_address	device;
386     /* XXX pads to 512 bytes */
387 } __packed;
388 
389 /*
390  * CISS config table, which describes the controller's
391  * supported interface(s) and capabilities.
392  *
393  * This is mapped directly via PCI.
394  */
395 struct ciss_config_table
396 {
397     char	signature[4];		/* "CISS" */
398     u_int32_t	valence;
399     u_int32_t	supported_methods;
400 #define CISS_TRANSPORT_METHOD_READY	(1<<0)
401 #define CISS_TRANSPORT_METHOD_SIMPLE	(1<<1)
402 #define CISS_TRANSPORT_METHOD_PERF	(1<<2)
403     u_int32_t	active_method;
404     u_int32_t	requested_method;
405     u_int32_t	command_physlimit;
406     u_int32_t	interrupt_coalesce_delay;
407     u_int32_t	interrupt_coalesce_count;
408     u_int32_t	max_outstanding_commands;
409     u_int32_t	bus_types;
410 #define CISS_TRANSPORT_BUS_TYPE_ULTRA2	(1<<0)
411 #define CISS_TRANSPORT_BUS_TYPE_ULTRA3	(1<<1)
412 #define CISS_TRANSPORT_BUS_TYPE_FIBRE1	(1<<8)
413 #define CISS_TRANSPORT_BUS_TYPE_FIBRE2	(1<<9)
414     u_int32_t	transport_offset;
415     char	server_name[16];
416     u_int32_t	heartbeat;
417     u_int32_t	host_driver;
418 #define CISS_DRIVER_SUPPORT_UNIT_ATTENTION	(1<<0)
419 #define CISS_DRIVER_QUICK_INIT			(1<<1)
420 #define CISS_DRIVER_INTERRUPT_ON_LOCKUP		(1<<2)
421 #define CISS_DRIVER_SUPPORT_MIXED_Q_TAGS	(1<<3)
422 #define CISS_DRIVER_HOST_IS_ALPHA		(1<<4)
423 #define CISS_DRIVER_MULTI_LUN_SUPPORT		(1<<5)
424 #define CISS_DRIVER_MESSAGE_REQUESTS_SUPPORTED	(1<<7)
425 #define CISS_DRIVER_DAUGHTER_ATTACHED		(1<<8)
426 #define CISS_DRIVER_SCSI_PREFETCH		(1<<9)
427     u_int32_t	max_sg_length;		/* 31 in older firmware */
428 } __packed;
429 
430 /*
431  * Configuration table for the Performant transport.  Only 4 request queues
432  * are mentioned in this table, though apparently up to 256 can exist.
433  */
434 struct ciss_perf_config {
435     uint32_t	fetch_count[8];
436 #define CISS_SG_FETCH_MAX	0
437 #define CISS_SG_FETCH_1		1
438 #define CISS_SG_FETCH_2		2
439 #define CISS_SG_FETCH_4		3
440 #define CISS_SG_FETCH_8		4
441 #define CISS_SG_FETCH_16	5
442 #define CISS_SG_FETCH_32	6
443 #define CISS_SG_FETCH_NONE	7
444     uint32_t	rq_size;
445     uint32_t	rq_count;
446     uint32_t	rq_bank_lo;
447     uint32_t	rq_bank_hi;
448     struct {
449 	uint32_t	rq_addr_lo;
450 	uint32_t	rq_addr_hi;
451     } __packed rq[4];
452 } __packed;
453 
454 /*
455  * In a flagrant violation of what CISS seems to be meant to be about,
456  * Compaq recycle a goodly portion of their previous generation's
457  * command set (and all the legacy baggage related to a design
458  * originally aimed at narrow SCSI) through the Array Controller Read
459  * and Array Controller Write interface.
460  *
461  * Command ID values here can be looked up for in the
462  * publically-available documentation for the older controllers; note
463  * that the command layout is necessarily different to fit within the
464  * CDB.
465  */
466 #define CISS_ARRAY_CONTROLLER_READ	0x26
467 #define CISS_ARRAY_CONTROLLER_WRITE	0x27
468 
469 #define CISS_BMIC_ID_LDRIVE		0x10
470 #define CISS_BMIC_ID_CTLR		0x11
471 #define CISS_BMIC_ID_LSTATUS		0x12
472 #define CISS_BMIC_ID_PDRIVE		0x15
473 #define CISS_BMIC_BLINK_PDRIVE		0x16
474 #define CISS_BMIC_SENSE_BLINK_PDRIVE	0x17
475 #define CISS_BMIC_SOFT_RESET		0x40
476 #define CISS_BMIC_FLUSH_CACHE		0xc2
477 #define CISS_BMIC_ACCEPT_MEDIA		0xe0
478 
479 /*
480  * When numbering drives, the original design assumed that
481  * drives 0-7 are on the first SCSI bus, 8-15 on the second,
482  * and so forth.  In order to handle modern SCSI configurations,
483  * the MSB is set in the drive ID field, in which case the
484  * modulus changes from 8 to the number of supported drives
485  * per SCSI bus (as obtained from the ID_CTLR command).
486  * This feature is referred to as BIG_MAP support, and we assume
487  * that all CISS controllers support it.
488  */
489 
490 #define CISS_BIG_MAP_ID(sc, bus, target)		\
491 	(0x80 | 					\
492 	 ((sc)->ciss_id->drives_per_scsi_bus * (bus)) |	\
493 	 (target))
494 
495 #define CISS_BIG_MAP_BUS(sc, id)			\
496 	(((id) & 0x80) ? (((id) & ~0x80) / (sc)->ciss_id->drives_per_scsi_bus) : -1)
497 
498 #define CISS_BIG_MAP_TARGET(sc, id)			\
499 	(((id) & 0x80) ? (((id) & ~0x80) % (sc)->ciss_id->drives_per_scsi_bus) : -1)
500 
501 #define CISS_BIG_MAP_ENTRIES	128	/* number of entries in a BIG_MAP */
502 
503 /*
504  * In the device address of a logical volume, the bus number
505  * is encoded into the logical lun volume number starting
506  * at the second byte, with the first byte defining the
507  * logical drive number.
508  */
509 #define CISS_LUN_TO_BUS(x)    (((x) >> 16) & 0xFF)
510 #define CISS_LUN_TO_TARGET(x) ((x) & 0xFF)
511 
512 /*
513  * BMIC CDB
514  *
515  * Note that the phys_drive/res1 field is nominally the 32-bit
516  * "block number" field, but the only BMIC command(s) of interest
517  * implemented overload the MSB (note big-endian format here)
518  * to be the physical drive ID, so we define accordingly.
519  */
520 struct ciss_bmic_cdb {
521     u_int8_t	opcode;
522     u_int8_t	log_drive;
523     u_int8_t	phys_drive;
524     u_int8_t	res1[3];
525     u_int8_t	bmic_opcode;
526     u_int16_t	size;			/* big-endian */
527     u_int8_t	res2;
528 } __packed;
529 
530 /*
531  * BMIC command command/return structures.
532  */
533 
534 /* CISS_BMIC_ID_LDRIVE */
535 struct ciss_bmic_id_ldrive {
536     u_int16_t	block_size;
537     u_int32_t	blocks_available;
538     u_int8_t	drive_parameter_table[16];	/* XXX define */
539     u_int8_t	fault_tolerance;
540 #define CISS_LDRIVE_RAID0	0
541 #define CISS_LDRIVE_RAID4	1
542 #define CISS_LDRIVE_RAID1	2
543 #define CISS_LDRIVE_RAID5	3
544 #define CISS_LDRIVE_RAID51	4
545 #define CISS_LDRIVE_RAIDADG	5
546     u_int8_t	res1;
547     u_int8_t	bios_disable_flag;
548     u_int8_t	res2;
549     u_int32_t	logical_drive_identifier;
550     char	logical_drive_label[64];
551     u_int64_t	big_blocks_available;
552     u_int8_t	res3[410];
553 } __packed;
554 
555 /* CISS_BMIC_ID_LSTATUS */
556 struct ciss_bmic_id_lstatus {
557     u_int8_t	status;
558 #define CISS_LSTATUS_OK				0
559 #define CISS_LSTATUS_FAILED			1
560 #define CISS_LSTATUS_NOT_CONFIGURED		2
561 #define CISS_LSTATUS_INTERIM_RECOVERY		3
562 #define CISS_LSTATUS_READY_RECOVERY		4
563 #define CISS_LSTATUS_RECOVERING			5
564 #define CISS_LSTATUS_WRONG_PDRIVE		6
565 #define CISS_LSTATUS_MISSING_PDRIVE		7
566 #define CISS_LSTATUS_EXPANDING			10
567 #define CISS_LSTATUS_BECOMING_READY		11
568 #define CISS_LSTATUS_QUEUED_FOR_EXPANSION	12
569     u_int32_t	deprecated_drive_failure_map;
570     u_int8_t	res1[416];
571     u_int32_t	blocks_to_recover;
572     u_int8_t	deprecated_drive_rebuilding;
573     u_int16_t	deprecated_remap_count[32];
574     u_int32_t	deprecated_replacement_map;
575     u_int32_t	deprecated_active_spare_map;
576     u_int8_t	spare_configured:1;
577     u_int8_t	spare_rebuilding:1;
578     u_int8_t	spare_rebuilt:1;
579     u_int8_t	spare_failed:1;
580     u_int8_t	spare_switched:1;
581     u_int8_t	spare_available:1;
582     u_int8_t	res2:2;
583     u_int8_t	deprecated_spare_to_replace_map[32];
584     u_int32_t	deprecated_replaced_marked_ok_map;
585     u_int8_t	media_exchanged;
586     u_int8_t	cache_failure;
587     u_int8_t	expand_failure;
588     u_int8_t	rebuild_read_failure:1;
589     u_int8_t	rebuild_write_failure:1;
590     u_int8_t	res3:6;
591     u_int8_t	drive_failure_map[CISS_BIG_MAP_ENTRIES / 8];
592     u_int16_t	remap_count[CISS_BIG_MAP_ENTRIES];
593     u_int8_t	replacement_map[CISS_BIG_MAP_ENTRIES / 8];
594     u_int8_t	active_spare_map[CISS_BIG_MAP_ENTRIES / 8];
595     u_int8_t	spare_to_replace_map[CISS_BIG_MAP_ENTRIES];
596     u_int8_t	replaced_marked_ok_map[CISS_BIG_MAP_ENTRIES / 8];
597     u_int8_t	drive_rebuilding;
598     u_int64_t	big_blocks_to_recover;
599     u_int8_t	res4[28];
600 } __packed;
601 
602 /* CISS_BMIC_ID_CTLR */
603 struct ciss_bmic_id_table {
604     u_int8_t	configured_logical_drives;
605     u_int32_t	config_signature;
606     char	running_firmware_revision[4];
607     char	stored_firmware_revision[4];
608     u_int8_t	hardware_revision;
609     u_int8_t	res1[4];
610     u_int32_t	deprecated_drive_present_map;
611     u_int32_t	deprecated_external_drive_present_map;
612     u_int32_t	board_id;
613     u_int8_t	res2;
614     u_int32_t	deprecated_non_disk_map;
615     u_int8_t	res3[5];
616     char	marketting_revision;
617     u_int8_t	res4:3;
618     u_int8_t	more_than_seven_supported:1;
619     u_int8_t	res5:3;
620     u_int8_t	big_map_supported:1;		/* must be set! */
621     u_int8_t	res6[2];
622     u_int8_t	scsi_bus_count;
623     u_int32_t	res7;
624     u_int32_t	controller_clock;
625     u_int8_t	drives_per_scsi_bus;
626     u_int8_t	big_drive_present_map[CISS_BIG_MAP_ENTRIES / 8];
627     u_int8_t	big_external_drive_present_map[CISS_BIG_MAP_ENTRIES / 8];
628     u_int8_t	big_non_disk_map[CISS_BIG_MAP_ENTRIES / 8];
629 } __packed;
630 
631 /* CISS_BMIC_ID_PDRIVE */
632 struct ciss_bmic_id_pdrive {
633     u_int8_t	scsi_bus;
634     u_int8_t	scsi_id;
635     u_int16_t	block_size;
636     u_int32_t	total_blocks;
637     u_int32_t	reserved_blocks;
638     char	model[40];
639     char	serial[40];
640     char	revision[8];
641     u_int8_t	inquiry_bits;
642     u_int8_t	res1[2];
643     u_int8_t	drive_present:1;
644     u_int8_t	non_disk:1;
645     u_int8_t	wide:1;
646     u_int8_t	synchronous:1;
647     u_int8_t	narrow:1;
648     u_int8_t	wide_downgraded_to_narrow:1;
649     u_int8_t	ultra:1;
650     u_int8_t	ultra2:1;
651     u_int8_t	SMART:1;
652     u_int8_t	SMART_errors_recorded:1;
653     u_int8_t	SMART_errors_enabled:1;
654     u_int8_t	SMART_errors_detected:1;
655     u_int8_t	external:1;
656     u_int8_t	configured:1;
657     u_int8_t	configured_spare:1;
658     u_int8_t	cache_saved_enabled:1;
659     u_int8_t	res2;
660     u_int8_t	res3:6;
661     u_int8_t	cache_currently_enabled:1;
662     u_int8_t	cache_safe:1;
663     u_int8_t	res4[5];
664     char	connector[2];
665     u_int8_t	res5;
666     u_int8_t	bay;
667     u_int16_t	rpm;
668     u_int8_t	drive_type;
669     u_int8_t	res6[393];
670 } __packed;
671 
672 /* CISS_BMIC_BLINK_PDRIVE */
673 /* CISS_BMIC_SENSE_BLINK_PDRIVE */
674 struct ciss_bmic_blink_pdrive {
675     u_int32_t	blink_duration;		/* 10ths of a second */
676     u_int32_t	duration_elapsed;	/* only for sense command  */
677     u_int8_t	blinktab[256];
678 #define CISS_BMIC_BLINK_ALL	1
679 #define CISS_BMIC_BLINK_TIMED	2
680     u_int8_t	res2[248];
681 } __packed;
682 
683 /* CISS_BMIC_FLUSH_CACHE */
684 struct ciss_bmic_flush_cache {
685     u_int16_t	flag;
686 #define CISS_BMIC_FLUSH_AND_ENABLE	0
687 #define CISS_BMIC_FLUSH_AND_DISABLE	1
688     u_int8_t	res1[510];
689 } __packed;
690 
691 #ifdef _KERNEL
692 /*
693  * CISS "simple" transport layer.
694  *
695  * Note that there are two slightly different versions of this interface
696  * with different interrupt mask bits.  There's nothing like consistency...
697  */
698 #define CISS_TL_SIMPLE_BAR_REGS	0x10	/* BAR pointing to register space */
699 #define CISS_TL_SIMPLE_BAR_CFG	0x14	/* BAR pointing to space containing config table */
700 
701 #define CISS_TL_SIMPLE_IDBR	0x20	/* inbound doorbell register */
702 #define CISS_TL_SIMPLE_IDBR_CFG_TABLE	(1<<0)	/* notify controller of config table update */
703 
704 #define CISS_TL_SIMPLE_ISR	0x30	/* interrupt status register */
705 #define CISS_TL_SIMPLE_IMR	0x34	/* interrupt mask register */
706 #define CISS_TL_SIMPLE_INTR_OPQ_SA5	(1<<3)	/* OPQ not empty interrupt, SA5 boards */
707 #define CISS_TL_SIMPLE_INTR_OPQ_SA5B	(1<<2)	/* OPQ not empty interrupt, SA5B boards */
708 
709 #define CISS_TL_SIMPLE_IPQ	0x40	/* inbound post queue */
710 #define CISS_TL_SIMPLE_OPQ	0x44	/* outbound post queue */
711 #define CISS_TL_SIMPLE_OPQ_EMPTY	(~(u_int32_t)0)
712 
713 #define CISS_TL_SIMPLE_OSR	0x9c	/* outbound status register */
714 #define CISS_TL_SIMPLE_ODC	0xa0	/* outbound doorbell clear register */
715 #define CISS_TL_SIMPLE_ODC_CLEAR	(0x1)
716 
717 #define CISS_TL_SIMPLE_CFG_BAR	0xb4	/* should be 0x14 */
718 #define CISS_TL_SIMPLE_CFG_OFF	0xb8	/* offset in BAR at which config table is located */
719 
720 /*
721  * Register access primitives.
722  */
723 #define CISS_TL_SIMPLE_READ(sc, ofs) \
724 	bus_space_read_4(sc->ciss_regs_btag, sc->ciss_regs_bhandle, ofs)
725 #define CISS_TL_SIMPLE_WRITE(sc, ofs, val) \
726 	bus_space_write_4(sc->ciss_regs_btag, sc->ciss_regs_bhandle, ofs, val)
727 
728 #define CISS_TL_SIMPLE_POST_CMD(sc, phys)	CISS_TL_SIMPLE_WRITE(sc, CISS_TL_SIMPLE_IPQ, phys)
729 #define CISS_TL_SIMPLE_FETCH_CMD(sc)		CISS_TL_SIMPLE_READ(sc, CISS_TL_SIMPLE_OPQ)
730 
731 #define CISS_TL_PERF_INTR_OPQ	(CISS_TL_SIMPLE_INTR_OPQ_SA5 | CISS_TL_SIMPLE_INTR_OPQ_SA5B)
732 #define CISS_TL_PERF_INTR_MSI	0x01
733 
734 #define CISS_TL_PERF_POST_CMD(sc, cr)		CISS_TL_SIMPLE_WRITE(sc, CISS_TL_SIMPLE_IPQ, cr->cr_ccphys | (cr)->cr_sg_tag)
735 #define CISS_TL_PERF_FLUSH_INT(sc)		CISS_TL_SIMPLE_READ(sc, CISS_TL_SIMPLE_OSR)
736 #define CISS_TL_PERF_CLEAR_INT(sc)		CISS_TL_SIMPLE_WRITE(sc, CISS_TL_SIMPLE_ODC, CISS_TL_SIMPLE_ODC_CLEAR)
737 #define CISS_CYCLE_MASK		0x00000001
738 
739 /* Only need one MSI/MSI-X vector */
740 #define CISS_MSI_COUNT	1
741 
742 #define CISS_TL_SIMPLE_DISABLE_INTERRUPTS(sc) \
743 	CISS_TL_SIMPLE_WRITE(sc, CISS_TL_SIMPLE_IMR, \
744 			     CISS_TL_SIMPLE_READ(sc, CISS_TL_SIMPLE_IMR) | (sc)->ciss_interrupt_mask)
745 #define CISS_TL_SIMPLE_ENABLE_INTERRUPTS(sc) \
746 	CISS_TL_SIMPLE_WRITE(sc, CISS_TL_SIMPLE_IMR, \
747 			     CISS_TL_SIMPLE_READ(sc, CISS_TL_SIMPLE_IMR) & ~(sc)->ciss_interrupt_mask)
748 
749 
750 
751 #endif /* _KERNEL */
752