1 /*- 2 * Copyright 2000, 2001, 2002, 2003 3 * Broadcom Corporation. All rights reserved. 4 * 5 * This software is furnished under license and may be used and 6 * copied only in accordance with the following terms and 7 * conditions. Subject to these conditions, you may download, 8 * copy, install, use, modify and distribute modified or unmodified 9 * copies of this software in source and/or binary form. No title 10 * or ownership is transferred hereby. 11 * 12 * 1) Any source code used, modified or distributed must reproduce and 13 * retain this copyright notice and list of conditions as they appear in 14 * the source file. 15 * 16 * 2) No right is granted to use any trade name, trademark, or logo of 17 * Broadcom Corporation. The "Broadcom Corporation" name may not be 18 * used to endorse or promote products derived from this software 19 * without the prior written permission of Broadcom Corporation. 20 * 21 * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED 22 * WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF 23 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR 24 * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE 25 * FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE 26 * LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR 29 * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 30 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE 31 * OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 32 * 33 * $FreeBSD$ 34 */ 35 36 /* ********************************************************************* 37 * Broadcom Common Firmware Environment (CFE) 38 * 39 * IOCTL definitions File: cfe_ioctl.h 40 * 41 * IOCTL function numbers and I/O data structures. 42 * 43 * Author: Mitch Lichtenberg 44 * 45 ********************************************************************* */ 46 47 48 /* ********************************************************************* 49 * NVFAM and FLASH stuff 50 ********************************************************************* */ 51 52 #define IOCTL_NVRAM_GETINFO 1 /* return nvram_info_t */ 53 #define IOCTL_NVRAM_ERASE 2 /* erase sector containing nvram_info_t area */ 54 #define IOCTL_FLASH_ERASE_SECTOR 3 /* erase an arbitrary sector */ 55 #define IOCTL_FLASH_ERASE_ALL 4 /* Erase the entire flash */ 56 #define IOCTL_FLASH_WRITE_ALL 5 /* write entire flash */ 57 #define IOCTL_FLASH_GETINFO 6 /* get flash device info */ 58 #define IOCTL_FLASH_GETSECTORS 7 /* get sector information */ 59 #define IOCTL_FLASH_ERASE_RANGE 8 /* erase range of bytes */ 60 #define IOCTL_NVRAM_UNLOCK 9 /* allow r/w beyond logical end of device */ 61 #define IOCTL_FLASH_PROTECT_RANGE 10 /* Protect a group of sectors */ 62 #define IOCTL_FLASH_UNPROTECT_RANGE 11 /* unprotect a group of sectors */ 63 #define IOCTL_FLASH_DATA_WIDTH_MODE 12 /* switch flash and gen bus to support 8 or 16-bit mode I/Os */ 64 #define IOCTL_FLASH_BURST_MODE 13 /* configure gen bus for burst mode */ 65 66 typedef struct flash_range_s { 67 unsigned int range_base; 68 unsigned int range_length; 69 } flash_range_t; 70 71 typedef struct flash_info_s { 72 unsigned long long flash_base; /* flash physical base address */ 73 unsigned int flash_size; /* available device size in bytes */ 74 unsigned int flash_type; /* type, from FLASH_TYPE below */ 75 unsigned int flash_flags; /* Various flags (FLASH_FLAG_xxx) */ 76 } flash_info_t; 77 78 typedef struct flash_sector_s { 79 int flash_sector_idx; 80 int flash_sector_status; 81 unsigned int flash_sector_offset; 82 unsigned int flash_sector_size; 83 } flash_sector_t; 84 85 #define FLASH_SECTOR_OK 0 86 #define FLASH_SECTOR_INVALID -1 87 88 #define FLASH_TYPE_UNKNOWN 0 /* not sure what kind of flash */ 89 #define FLASH_TYPE_SRAM 1 /* not flash: it's SRAM */ 90 #define FLASH_TYPE_ROM 2 /* not flash: it's ROM */ 91 #define FLASH_TYPE_FLASH 3 /* it's flash memory of some sort */ 92 93 #define FLASH_FLAG_NOERASE 1 /* Byte-range writes supported, 94 Erasing is not necessary */ 95 96 typedef struct nvram_info_s { 97 int nvram_offset; /* offset of environment area */ 98 int nvram_size; /* size of environment area */ 99 int nvram_eraseflg; /* true if we need to erase first */ 100 } nvram_info_t; 101 102 /* ********************************************************************* 103 * Ethernet stuff 104 ********************************************************************* */ 105 106 #define IOCTL_ETHER_GETHWADDR 1 /* Get hardware address (6bytes) */ 107 #define IOCTL_ETHER_SETHWADDR 2 /* Set hardware address (6bytes) */ 108 #define IOCTL_ETHER_GETSPEED 3 /* Get Speed and Media (int) */ 109 #define IOCTL_ETHER_SETSPEED 4 /* Set Speed and Media (int) */ 110 #define IOCTL_ETHER_GETLINK 5 /* get link status (int) */ 111 #define IOCTL_ETHER_GETLOOPBACK 7 /* get loopback state */ 112 #define IOCTL_ETHER_SETLOOPBACK 8 /* set loopback state */ 113 #define IOCTL_ETHER_SETPACKETFIFO 9 /* set packet fifo mode (int) */ 114 #define IOCTL_ETHER_SETSTROBESIG 10 /* set strobe signal (int) */ 115 116 #define ETHER_LOOPBACK_OFF 0 /* no loopback */ 117 #define ETHER_LOOPBACK_INT 1 /* Internal loopback */ 118 #define ETHER_LOOPBACK_EXT 2 /* External loopback (through PHY) */ 119 120 #define ETHER_SPEED_AUTO 0 /* Auto detect */ 121 #define ETHER_SPEED_UNKNOWN 0 /* Speed not known (on link status) */ 122 #define ETHER_SPEED_10HDX 1 /* 10MB hdx and fdx */ 123 #define ETHER_SPEED_10FDX 2 124 #define ETHER_SPEED_100HDX 3 /* 100MB hdx and fdx */ 125 #define ETHER_SPEED_100FDX 4 126 #define ETHER_SPEED_1000HDX 5 /* 1000MB hdx and fdx */ 127 #define ETHER_SPEED_1000FDX 6 128 129 #define ETHER_FIFO_8 0 /* 8-bit packet fifo mode */ 130 #define ETHER_FIFO_16 1 /* 16-bit packet fifo mode */ 131 #define ETHER_ETHER 2 /* Standard ethernet mode */ 132 133 #define ETHER_STROBE_GMII 0 /* GMII style strobe signal */ 134 #define ETHER_STROBE_ENCODED 1 /* Encoded */ 135 #define ETHER_STROBE_SOP 2 /* SOP flagged. Only in 8-bit mode*/ 136 #define ETHER_STROBE_EOP 3 /* EOP flagged. Only in 8-bit mode*/ 137 138 /* ********************************************************************* 139 * Serial Ports 140 ********************************************************************* */ 141 142 #define IOCTL_SERIAL_SETSPEED 1 /* get baud rate (int) */ 143 #define IOCTL_SERIAL_GETSPEED 2 /* set baud rate (int) */ 144 #define IOCTL_SERIAL_SETFLOW 3 /* Set Flow Control */ 145 #define IOCTL_SERIAL_GETFLOW 4 /* Get Flow Control */ 146 147 #define SERIAL_FLOW_NONE 0 /* no flow control */ 148 #define SERIAL_FLOW_SOFTWARE 1 /* software flow control (not impl) */ 149 #define SERIAL_FLOW_HARDWARE 2 /* hardware flow control */ 150 151 /* ********************************************************************* 152 * Block device stuff 153 ********************************************************************* */ 154 155 #define IOCTL_BLOCK_GETBLOCKSIZE 1 /* get block size (int) */ 156 #define IOCTL_BLOCK_GETTOTALBLOCKS 2 /* get total bocks (long long) */ 157 #define IOCTL_BLOCK_GETDEVTYPE 3 /* get device type (struct) */ 158 159 typedef struct blockdev_info_s { 160 unsigned long long blkdev_totalblocks; 161 unsigned int blkdev_blocksize; 162 unsigned int blkdev_devtype; 163 } blockdev_info_t; 164 165 #define BLOCK_DEVTYPE_DISK 0 166 #define BLOCK_DEVTYPE_CDROM 1 167