1 /*- 2 * Copyright (c) 2007-2014 QLogic Corporation. All rights reserved. 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions 6 * are met: 7 * 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS' 15 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS 18 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 19 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 20 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 21 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 22 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 23 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 24 * THE POSSIBILITY OF SUCH DAMAGE. 25 */ 26 27 #include <sys/cdefs.h> 28 __FBSDID("$FreeBSD$"); 29 30 #ifndef ECORE_INIT_OPS_H 31 #define ECORE_INIT_OPS_H 32 33 34 35 36 37 38 39 40 41 42 static int ecore_gunzip(struct bxe_softc *sc, const uint8_t *zbuf, int len); 43 static void ecore_reg_wr_ind(struct bxe_softc *sc, uint32_t addr, uint32_t val); 44 static void ecore_write_dmae_phys_len(struct bxe_softc *sc, 45 ecore_dma_addr_t phys_addr, uint32_t addr, 46 uint32_t len); 47 48 static void ecore_init_str_wr(struct bxe_softc *sc, uint32_t addr, 49 const uint32_t *data, uint32_t len) 50 { 51 uint32_t i; 52 53 for (i = 0; i < len; i++) 54 REG_WR(sc, addr + i*4, data[i]); 55 } 56 57 static void ecore_init_ind_wr(struct bxe_softc *sc, uint32_t addr, 58 const uint32_t *data, uint32_t len) 59 { 60 uint32_t i; 61 62 for (i = 0; i < len; i++) 63 ecore_reg_wr_ind(sc, addr + i*4, data[i]); 64 } 65 66 static void ecore_write_big_buf(struct bxe_softc *sc, uint32_t addr, uint32_t len, 67 uint8_t wb) 68 { 69 if (DMAE_READY(sc)) 70 ecore_write_dmae_phys_len(sc, GUNZIP_PHYS(sc), addr, len); 71 72 /* in E1 chips BIOS initiated ZLR may interrupt widebus writes */ 73 else if (wb && CHIP_IS_E1(sc)) 74 ecore_init_ind_wr(sc, addr, GUNZIP_BUF(sc), len); 75 76 /* in later chips PXP root complex handles BIOS ZLR w/o interrupting */ 77 else 78 ecore_init_str_wr(sc, addr, GUNZIP_BUF(sc), len); 79 } 80 81 static void ecore_init_fill(struct bxe_softc *sc, uint32_t addr, int fill, 82 uint32_t len, uint8_t wb) 83 { 84 uint32_t buf_len = (((len*4) > FW_BUF_SIZE) ? FW_BUF_SIZE : (len*4)); 85 uint32_t buf_len32 = buf_len/4; 86 uint32_t i; 87 88 ECORE_MEMSET(GUNZIP_BUF(sc), (uint8_t)fill, buf_len); 89 90 for (i = 0; i < len; i += buf_len32) { 91 uint32_t cur_len = min(buf_len32, len - i); 92 93 ecore_write_big_buf(sc, addr + i*4, cur_len, wb); 94 } 95 } 96 97 static void ecore_write_big_buf_wb(struct bxe_softc *sc, uint32_t addr, uint32_t len) 98 { 99 if (DMAE_READY(sc)) 100 ecore_write_dmae_phys_len(sc, GUNZIP_PHYS(sc), addr, len); 101 102 /* in E1 chips BIOS initiated ZLR may interrupt widebus writes */ 103 else if (CHIP_IS_E1(sc)) 104 ecore_init_ind_wr(sc, addr, GUNZIP_BUF(sc), len); 105 106 /* in later chips PXP root complex handles BIOS ZLR w/o interrupting */ 107 else 108 ecore_init_str_wr(sc, addr, GUNZIP_BUF(sc), len); 109 } 110 111 static void ecore_init_wr_64(struct bxe_softc *sc, uint32_t addr, 112 const uint32_t *data, uint32_t len64) 113 { 114 uint32_t buf_len32 = FW_BUF_SIZE/4; 115 uint32_t len = len64*2; 116 uint64_t data64 = 0; 117 uint32_t i; 118 119 /* 64 bit value is in a blob: first low DWORD, then high DWORD */ 120 data64 = HILO_U64((*(data + 1)), (*data)); 121 122 len64 = min((uint32_t)(FW_BUF_SIZE/8), len64); 123 for (i = 0; i < len64; i++) { 124 uint64_t *pdata = ((uint64_t *)(GUNZIP_BUF(sc))) + i; 125 126 *pdata = data64; 127 } 128 129 for (i = 0; i < len; i += buf_len32) { 130 uint32_t cur_len = min(buf_len32, len - i); 131 132 ecore_write_big_buf_wb(sc, addr + i*4, cur_len); 133 } 134 } 135 136 /********************************************************* 137 There are different blobs for each PRAM section. 138 In addition, each blob write operation is divided into a few operations 139 in order to decrease the amount of phys. contiguous buffer needed. 140 Thus, when we select a blob the address may be with some offset 141 from the beginning of PRAM section. 142 The same holds for the INT_TABLE sections. 143 **********************************************************/ 144 #define IF_IS_INT_TABLE_ADDR(base, addr) \ 145 if (((base) <= (addr)) && ((base) + 0x400 >= (addr))) 146 147 #define IF_IS_PRAM_ADDR(base, addr) \ 148 if (((base) <= (addr)) && ((base) + 0x40000 >= (addr))) 149 150 static const uint8_t *ecore_sel_blob(struct bxe_softc *sc, uint32_t addr, 151 const uint8_t *data) 152 { 153 IF_IS_INT_TABLE_ADDR(TSEM_REG_INT_TABLE, addr) 154 data = INIT_TSEM_INT_TABLE_DATA(sc); 155 else 156 IF_IS_INT_TABLE_ADDR(CSEM_REG_INT_TABLE, addr) 157 data = INIT_CSEM_INT_TABLE_DATA(sc); 158 else 159 IF_IS_INT_TABLE_ADDR(USEM_REG_INT_TABLE, addr) 160 data = INIT_USEM_INT_TABLE_DATA(sc); 161 else 162 IF_IS_INT_TABLE_ADDR(XSEM_REG_INT_TABLE, addr) 163 data = INIT_XSEM_INT_TABLE_DATA(sc); 164 else 165 IF_IS_PRAM_ADDR(TSEM_REG_PRAM, addr) 166 data = INIT_TSEM_PRAM_DATA(sc); 167 else 168 IF_IS_PRAM_ADDR(CSEM_REG_PRAM, addr) 169 data = INIT_CSEM_PRAM_DATA(sc); 170 else 171 IF_IS_PRAM_ADDR(USEM_REG_PRAM, addr) 172 data = INIT_USEM_PRAM_DATA(sc); 173 else 174 IF_IS_PRAM_ADDR(XSEM_REG_PRAM, addr) 175 data = INIT_XSEM_PRAM_DATA(sc); 176 177 return data; 178 } 179 180 static void ecore_init_wr_wb(struct bxe_softc *sc, uint32_t addr, 181 const uint32_t *data, uint32_t len) 182 { 183 if (DMAE_READY(sc)) 184 VIRT_WR_DMAE_LEN(sc, data, addr, len, 0); 185 186 /* in E1 chips BIOS initiated ZLR may interrupt widebus writes */ 187 else if (CHIP_IS_E1(sc)) 188 ecore_init_ind_wr(sc, addr, data, len); 189 190 /* in later chips PXP root complex handles BIOS ZLR w/o interrupting */ 191 else 192 ecore_init_str_wr(sc, addr, data, len); 193 } 194 195 #ifndef FW_ZIP_SUPPORT 196 static void ecore_init_fw(struct bxe_softc *sc, uint32_t addr, uint32_t len) 197 { 198 const uint8_t *data = NULL; 199 200 data = ecore_sel_blob(sc, addr, (const uint8_t *)data); 201 202 if (DMAE_READY(sc)) 203 VIRT_WR_DMAE_LEN(sc, data, addr, len, 1); 204 205 /* in E1 BIOS initiated ZLR may interrupt widebus writes */ 206 else if (CHIP_IS_E1(sc)) 207 ecore_init_ind_wr(sc, addr, (const uint32_t *)data, len); 208 209 /* in later chips PXP root complex handles BIOS ZLR w/o interrupting */ 210 else 211 ecore_init_str_wr(sc, addr, (const uint32_t *)data, len); 212 } 213 214 #endif 215 216 static void ecore_wr_64(struct bxe_softc *sc, uint32_t reg, uint32_t val_lo, 217 uint32_t val_hi) 218 { 219 uint32_t wb_write[2]; 220 221 wb_write[0] = val_lo; 222 wb_write[1] = val_hi; 223 REG_WR_DMAE_LEN(sc, reg, wb_write, 2); 224 } 225 226 static void ecore_init_wr_zp(struct bxe_softc *sc, uint32_t addr, uint32_t len, 227 uint32_t blob_off) 228 { 229 const uint8_t *data = NULL; 230 int rc; 231 uint32_t i; 232 233 data = ecore_sel_blob(sc, addr, data) + blob_off*4; 234 235 rc = ecore_gunzip(sc, data, len); 236 if (rc) 237 return; 238 239 /* gunzip_outlen is in dwords */ 240 len = GUNZIP_OUTLEN(sc); 241 for (i = 0; i < len; i++) 242 ((uint32_t *)GUNZIP_BUF(sc))[i] = (uint32_t) 243 ECORE_CPU_TO_LE32(((uint32_t *)GUNZIP_BUF(sc))[i]); 244 245 ecore_write_big_buf_wb(sc, addr, len); 246 } 247 248 static void ecore_init_block(struct bxe_softc *sc, uint32_t block, uint32_t stage) 249 { 250 uint16_t op_start = 251 INIT_OPS_OFFSETS(sc)[BLOCK_OPS_IDX(block, stage, 252 STAGE_START)]; 253 uint16_t op_end = 254 INIT_OPS_OFFSETS(sc)[BLOCK_OPS_IDX(block, stage, 255 STAGE_END)]; 256 const union init_op *op; 257 uint32_t op_idx, op_type, addr, len; 258 const uint32_t *data, *data_base; 259 260 /* If empty block */ 261 if (op_start == op_end) 262 return; 263 264 data_base = INIT_DATA(sc); 265 266 for (op_idx = op_start; op_idx < op_end; op_idx++) { 267 268 op = (const union init_op *)&(INIT_OPS(sc)[op_idx]); 269 /* Get generic data */ 270 op_type = op->raw.op; 271 addr = op->raw.offset; 272 /* Get data that's used for OP_SW, OP_WB, OP_FW, OP_ZP and 273 * OP_WR64 (we assume that op_arr_write and op_write have the 274 * same structure). 275 */ 276 len = op->arr_wr.data_len; 277 data = data_base + op->arr_wr.data_off; 278 279 switch (op_type) { 280 case OP_RD: 281 REG_RD(sc, addr); 282 break; 283 case OP_WR: 284 REG_WR(sc, addr, op->write.val); 285 break; 286 case OP_SW: 287 ecore_init_str_wr(sc, addr, data, len); 288 break; 289 case OP_WB: 290 ecore_init_wr_wb(sc, addr, data, len); 291 break; 292 #ifndef FW_ZIP_SUPPORT 293 case OP_FW: 294 ecore_init_fw(sc, addr, len); 295 break; 296 #endif 297 case OP_ZR: 298 ecore_init_fill(sc, addr, 0, op->zero.len, 0); 299 break; 300 case OP_WB_ZR: 301 ecore_init_fill(sc, addr, 0, op->zero.len, 1); 302 break; 303 case OP_ZP: 304 ecore_init_wr_zp(sc, addr, len, 305 op->arr_wr.data_off); 306 break; 307 case OP_WR_64: 308 ecore_init_wr_64(sc, addr, data, len); 309 break; 310 case OP_IF_MODE_AND: 311 /* if any of the flags doesn't match, skip the 312 * conditional block. 313 */ 314 if ((INIT_MODE_FLAGS(sc) & 315 op->if_mode.mode_bit_map) != 316 op->if_mode.mode_bit_map) 317 op_idx += op->if_mode.cmd_offset; 318 break; 319 case OP_IF_MODE_OR: 320 /* if all the flags don't match, skip the conditional 321 * block. 322 */ 323 if ((INIT_MODE_FLAGS(sc) & 324 op->if_mode.mode_bit_map) == 0) 325 op_idx += op->if_mode.cmd_offset; 326 break; 327 /* the following opcodes are unused at the moment. */ 328 case OP_IF_PHASE: 329 case OP_RT: 330 case OP_DELAY: 331 case OP_VERIFY: 332 default: 333 /* Should never get here! */ 334 335 break; 336 } 337 } 338 } 339 340 341 /**************************************************************************** 342 * PXP Arbiter 343 ****************************************************************************/ 344 /* 345 * This code configures the PCI read/write arbiter 346 * which implements a weighted round robin 347 * between the virtual queues in the chip. 348 * 349 * The values were derived for each PCI max payload and max request size. 350 * since max payload and max request size are only known at run time, 351 * this is done as a separate init stage. 352 */ 353 354 #define NUM_WR_Q 13 355 #define NUM_RD_Q 29 356 #define MAX_RD_ORD 3 357 #define MAX_WR_ORD 2 358 359 /* configuration for one arbiter queue */ 360 struct arb_line { 361 int l; 362 int add; 363 int ubound; 364 }; 365 366 /* derived configuration for each read queue for each max request size */ 367 static const struct arb_line read_arb_data[NUM_RD_Q][MAX_RD_ORD + 1] = { 368 /* 1 */ { {8, 64, 25}, {16, 64, 25}, {32, 64, 25}, {64, 64, 41} }, 369 { {4, 8, 4}, {4, 8, 4}, {4, 8, 4}, {4, 8, 4} }, 370 { {4, 3, 3}, {4, 3, 3}, {4, 3, 3}, {4, 3, 3} }, 371 { {8, 3, 6}, {16, 3, 11}, {16, 3, 11}, {16, 3, 11} }, 372 { {8, 64, 25}, {16, 64, 25}, {32, 64, 25}, {64, 64, 41} }, 373 { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {64, 3, 41} }, 374 { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {64, 3, 41} }, 375 { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {64, 3, 41} }, 376 { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {64, 3, 41} }, 377 /* 10 */{ {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, 378 { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, 379 { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, 380 { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, 381 { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, 382 { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, 383 { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, 384 { {8, 64, 6}, {16, 64, 11}, {32, 64, 21}, {32, 64, 21} }, 385 { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, 386 { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, 387 /* 20 */{ {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, 388 { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, 389 { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, 390 { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, 391 { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, 392 { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, 393 { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, 394 { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, 395 { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} }, 396 { {8, 64, 25}, {16, 64, 41}, {32, 64, 81}, {64, 64, 120} } 397 }; 398 399 /* derived configuration for each write queue for each max request size */ 400 static const struct arb_line write_arb_data[NUM_WR_Q][MAX_WR_ORD + 1] = { 401 /* 1 */ { {4, 6, 3}, {4, 6, 3}, {4, 6, 3} }, 402 { {4, 2, 3}, {4, 2, 3}, {4, 2, 3} }, 403 { {8, 2, 6}, {16, 2, 11}, {16, 2, 11} }, 404 { {8, 2, 6}, {16, 2, 11}, {32, 2, 21} }, 405 { {8, 2, 6}, {16, 2, 11}, {32, 2, 21} }, 406 { {8, 2, 6}, {16, 2, 11}, {32, 2, 21} }, 407 { {8, 64, 25}, {16, 64, 25}, {32, 64, 25} }, 408 { {8, 2, 6}, {16, 2, 11}, {16, 2, 11} }, 409 { {8, 2, 6}, {16, 2, 11}, {16, 2, 11} }, 410 /* 10 */{ {8, 9, 6}, {16, 9, 11}, {32, 9, 21} }, 411 { {8, 47, 19}, {16, 47, 19}, {32, 47, 21} }, 412 { {8, 9, 6}, {16, 9, 11}, {16, 9, 11} }, 413 { {8, 64, 25}, {16, 64, 41}, {32, 64, 81} } 414 }; 415 416 /* register addresses for read queues */ 417 static const struct arb_line read_arb_addr[NUM_RD_Q-1] = { 418 /* 1 */ {PXP2_REG_RQ_BW_RD_L0, PXP2_REG_RQ_BW_RD_ADD0, 419 PXP2_REG_RQ_BW_RD_UBOUND0}, 420 {PXP2_REG_PSWRQ_BW_L1, PXP2_REG_PSWRQ_BW_ADD1, 421 PXP2_REG_PSWRQ_BW_UB1}, 422 {PXP2_REG_PSWRQ_BW_L2, PXP2_REG_PSWRQ_BW_ADD2, 423 PXP2_REG_PSWRQ_BW_UB2}, 424 {PXP2_REG_PSWRQ_BW_L3, PXP2_REG_PSWRQ_BW_ADD3, 425 PXP2_REG_PSWRQ_BW_UB3}, 426 {PXP2_REG_RQ_BW_RD_L4, PXP2_REG_RQ_BW_RD_ADD4, 427 PXP2_REG_RQ_BW_RD_UBOUND4}, 428 {PXP2_REG_RQ_BW_RD_L5, PXP2_REG_RQ_BW_RD_ADD5, 429 PXP2_REG_RQ_BW_RD_UBOUND5}, 430 {PXP2_REG_PSWRQ_BW_L6, PXP2_REG_PSWRQ_BW_ADD6, 431 PXP2_REG_PSWRQ_BW_UB6}, 432 {PXP2_REG_PSWRQ_BW_L7, PXP2_REG_PSWRQ_BW_ADD7, 433 PXP2_REG_PSWRQ_BW_UB7}, 434 {PXP2_REG_PSWRQ_BW_L8, PXP2_REG_PSWRQ_BW_ADD8, 435 PXP2_REG_PSWRQ_BW_UB8}, 436 /* 10 */{PXP2_REG_PSWRQ_BW_L9, PXP2_REG_PSWRQ_BW_ADD9, 437 PXP2_REG_PSWRQ_BW_UB9}, 438 {PXP2_REG_PSWRQ_BW_L10, PXP2_REG_PSWRQ_BW_ADD10, 439 PXP2_REG_PSWRQ_BW_UB10}, 440 {PXP2_REG_PSWRQ_BW_L11, PXP2_REG_PSWRQ_BW_ADD11, 441 PXP2_REG_PSWRQ_BW_UB11}, 442 {PXP2_REG_RQ_BW_RD_L12, PXP2_REG_RQ_BW_RD_ADD12, 443 PXP2_REG_RQ_BW_RD_UBOUND12}, 444 {PXP2_REG_RQ_BW_RD_L13, PXP2_REG_RQ_BW_RD_ADD13, 445 PXP2_REG_RQ_BW_RD_UBOUND13}, 446 {PXP2_REG_RQ_BW_RD_L14, PXP2_REG_RQ_BW_RD_ADD14, 447 PXP2_REG_RQ_BW_RD_UBOUND14}, 448 {PXP2_REG_RQ_BW_RD_L15, PXP2_REG_RQ_BW_RD_ADD15, 449 PXP2_REG_RQ_BW_RD_UBOUND15}, 450 {PXP2_REG_RQ_BW_RD_L16, PXP2_REG_RQ_BW_RD_ADD16, 451 PXP2_REG_RQ_BW_RD_UBOUND16}, 452 {PXP2_REG_RQ_BW_RD_L17, PXP2_REG_RQ_BW_RD_ADD17, 453 PXP2_REG_RQ_BW_RD_UBOUND17}, 454 {PXP2_REG_RQ_BW_RD_L18, PXP2_REG_RQ_BW_RD_ADD18, 455 PXP2_REG_RQ_BW_RD_UBOUND18}, 456 /* 20 */{PXP2_REG_RQ_BW_RD_L19, PXP2_REG_RQ_BW_RD_ADD19, 457 PXP2_REG_RQ_BW_RD_UBOUND19}, 458 {PXP2_REG_RQ_BW_RD_L20, PXP2_REG_RQ_BW_RD_ADD20, 459 PXP2_REG_RQ_BW_RD_UBOUND20}, 460 {PXP2_REG_RQ_BW_RD_L22, PXP2_REG_RQ_BW_RD_ADD22, 461 PXP2_REG_RQ_BW_RD_UBOUND22}, 462 {PXP2_REG_RQ_BW_RD_L23, PXP2_REG_RQ_BW_RD_ADD23, 463 PXP2_REG_RQ_BW_RD_UBOUND23}, 464 {PXP2_REG_RQ_BW_RD_L24, PXP2_REG_RQ_BW_RD_ADD24, 465 PXP2_REG_RQ_BW_RD_UBOUND24}, 466 {PXP2_REG_RQ_BW_RD_L25, PXP2_REG_RQ_BW_RD_ADD25, 467 PXP2_REG_RQ_BW_RD_UBOUND25}, 468 {PXP2_REG_RQ_BW_RD_L26, PXP2_REG_RQ_BW_RD_ADD26, 469 PXP2_REG_RQ_BW_RD_UBOUND26}, 470 {PXP2_REG_RQ_BW_RD_L27, PXP2_REG_RQ_BW_RD_ADD27, 471 PXP2_REG_RQ_BW_RD_UBOUND27}, 472 {PXP2_REG_PSWRQ_BW_L28, PXP2_REG_PSWRQ_BW_ADD28, 473 PXP2_REG_PSWRQ_BW_UB28} 474 }; 475 476 /* register addresses for write queues */ 477 static const struct arb_line write_arb_addr[NUM_WR_Q-1] = { 478 /* 1 */ {PXP2_REG_PSWRQ_BW_L1, PXP2_REG_PSWRQ_BW_ADD1, 479 PXP2_REG_PSWRQ_BW_UB1}, 480 {PXP2_REG_PSWRQ_BW_L2, PXP2_REG_PSWRQ_BW_ADD2, 481 PXP2_REG_PSWRQ_BW_UB2}, 482 {PXP2_REG_PSWRQ_BW_L3, PXP2_REG_PSWRQ_BW_ADD3, 483 PXP2_REG_PSWRQ_BW_UB3}, 484 {PXP2_REG_PSWRQ_BW_L6, PXP2_REG_PSWRQ_BW_ADD6, 485 PXP2_REG_PSWRQ_BW_UB6}, 486 {PXP2_REG_PSWRQ_BW_L7, PXP2_REG_PSWRQ_BW_ADD7, 487 PXP2_REG_PSWRQ_BW_UB7}, 488 {PXP2_REG_PSWRQ_BW_L8, PXP2_REG_PSWRQ_BW_ADD8, 489 PXP2_REG_PSWRQ_BW_UB8}, 490 {PXP2_REG_PSWRQ_BW_L9, PXP2_REG_PSWRQ_BW_ADD9, 491 PXP2_REG_PSWRQ_BW_UB9}, 492 {PXP2_REG_PSWRQ_BW_L10, PXP2_REG_PSWRQ_BW_ADD10, 493 PXP2_REG_PSWRQ_BW_UB10}, 494 {PXP2_REG_PSWRQ_BW_L11, PXP2_REG_PSWRQ_BW_ADD11, 495 PXP2_REG_PSWRQ_BW_UB11}, 496 /* 10 */{PXP2_REG_PSWRQ_BW_L28, PXP2_REG_PSWRQ_BW_ADD28, 497 PXP2_REG_PSWRQ_BW_UB28}, 498 {PXP2_REG_RQ_BW_WR_L29, PXP2_REG_RQ_BW_WR_ADD29, 499 PXP2_REG_RQ_BW_WR_UBOUND29}, 500 {PXP2_REG_RQ_BW_WR_L30, PXP2_REG_RQ_BW_WR_ADD30, 501 PXP2_REG_RQ_BW_WR_UBOUND30} 502 }; 503 504 static void ecore_init_pxp_arb(struct bxe_softc *sc, int r_order, 505 int w_order) 506 { 507 uint32_t val, i; 508 509 if (r_order > MAX_RD_ORD) { 510 ECORE_MSG(sc, "read order of %d order adjusted to %d\n", 511 r_order, MAX_RD_ORD); 512 r_order = MAX_RD_ORD; 513 } 514 if (w_order > MAX_WR_ORD) { 515 ECORE_MSG(sc, "write order of %d order adjusted to %d\n", 516 w_order, MAX_WR_ORD); 517 w_order = MAX_WR_ORD; 518 } 519 if (CHIP_REV_IS_FPGA(sc)) { 520 ECORE_MSG(sc, "write order adjusted to 1 for FPGA\n"); 521 w_order = 0; 522 } 523 ECORE_MSG(sc, "read order %d write order %d\n", r_order, w_order); 524 525 for (i = 0; i < NUM_RD_Q-1; i++) { 526 REG_WR(sc, read_arb_addr[i].l, read_arb_data[i][r_order].l); 527 REG_WR(sc, read_arb_addr[i].add, 528 read_arb_data[i][r_order].add); 529 REG_WR(sc, read_arb_addr[i].ubound, 530 read_arb_data[i][r_order].ubound); 531 } 532 533 for (i = 0; i < NUM_WR_Q-1; i++) { 534 if ((write_arb_addr[i].l == PXP2_REG_RQ_BW_WR_L29) || 535 (write_arb_addr[i].l == PXP2_REG_RQ_BW_WR_L30)) { 536 537 REG_WR(sc, write_arb_addr[i].l, 538 write_arb_data[i][w_order].l); 539 540 REG_WR(sc, write_arb_addr[i].add, 541 write_arb_data[i][w_order].add); 542 543 REG_WR(sc, write_arb_addr[i].ubound, 544 write_arb_data[i][w_order].ubound); 545 } else { 546 547 val = REG_RD(sc, write_arb_addr[i].l); 548 REG_WR(sc, write_arb_addr[i].l, 549 val | (write_arb_data[i][w_order].l << 10)); 550 551 val = REG_RD(sc, write_arb_addr[i].add); 552 REG_WR(sc, write_arb_addr[i].add, 553 val | (write_arb_data[i][w_order].add << 10)); 554 555 val = REG_RD(sc, write_arb_addr[i].ubound); 556 REG_WR(sc, write_arb_addr[i].ubound, 557 val | (write_arb_data[i][w_order].ubound << 7)); 558 } 559 } 560 561 val = write_arb_data[NUM_WR_Q-1][w_order].add; 562 val += write_arb_data[NUM_WR_Q-1][w_order].ubound << 10; 563 val += write_arb_data[NUM_WR_Q-1][w_order].l << 17; 564 REG_WR(sc, PXP2_REG_PSWRQ_BW_RD, val); 565 566 val = read_arb_data[NUM_RD_Q-1][r_order].add; 567 val += read_arb_data[NUM_RD_Q-1][r_order].ubound << 10; 568 val += read_arb_data[NUM_RD_Q-1][r_order].l << 17; 569 REG_WR(sc, PXP2_REG_PSWRQ_BW_WR, val); 570 571 REG_WR(sc, PXP2_REG_RQ_WR_MBS0, w_order); 572 REG_WR(sc, PXP2_REG_RQ_WR_MBS1, w_order); 573 REG_WR(sc, PXP2_REG_RQ_RD_MBS0, r_order); 574 REG_WR(sc, PXP2_REG_RQ_RD_MBS1, r_order); 575 576 if ((CHIP_IS_E1(sc) || CHIP_IS_E1H(sc)) && (r_order == MAX_RD_ORD)) 577 REG_WR(sc, PXP2_REG_RQ_PDR_LIMIT, 0xe00); 578 579 if (CHIP_IS_E3(sc)) 580 REG_WR(sc, PXP2_REG_WR_USDMDP_TH, (0x4 << w_order)); 581 else if (CHIP_IS_E2(sc)) 582 REG_WR(sc, PXP2_REG_WR_USDMDP_TH, (0x8 << w_order)); 583 else 584 REG_WR(sc, PXP2_REG_WR_USDMDP_TH, (0x18 << w_order)); 585 586 if (!CHIP_IS_E1(sc)) { 587 /* MPS w_order optimal TH presently TH 588 * 128 0 0 2 589 * 256 1 1 3 590 * >=512 2 2 3 591 */ 592 /* DMAE is special */ 593 if (!CHIP_IS_E1H(sc)) { 594 /* E2 can use optimal TH */ 595 val = w_order; 596 REG_WR(sc, PXP2_REG_WR_DMAE_MPS, val); 597 } else { 598 val = ((w_order == 0) ? 2 : 3); 599 REG_WR(sc, PXP2_REG_WR_DMAE_MPS, 2); 600 } 601 602 REG_WR(sc, PXP2_REG_WR_HC_MPS, val); 603 REG_WR(sc, PXP2_REG_WR_USDM_MPS, val); 604 REG_WR(sc, PXP2_REG_WR_CSDM_MPS, val); 605 REG_WR(sc, PXP2_REG_WR_TSDM_MPS, val); 606 REG_WR(sc, PXP2_REG_WR_XSDM_MPS, val); 607 REG_WR(sc, PXP2_REG_WR_QM_MPS, val); 608 REG_WR(sc, PXP2_REG_WR_TM_MPS, val); 609 REG_WR(sc, PXP2_REG_WR_SRC_MPS, val); 610 REG_WR(sc, PXP2_REG_WR_DBG_MPS, val); 611 REG_WR(sc, PXP2_REG_WR_CDU_MPS, val); 612 } 613 614 /* Validate number of tags suppoted by device */ 615 #define PCIE_REG_PCIER_TL_HDR_FC_ST 0x2980 616 val = REG_RD(sc, PCIE_REG_PCIER_TL_HDR_FC_ST); 617 val &= 0xFF; 618 if (val <= 0x20) 619 REG_WR(sc, PXP2_REG_PGL_TAGS_LIMIT, 0x20); 620 } 621 622 /**************************************************************************** 623 * ILT management 624 ****************************************************************************/ 625 /* 626 * This codes hides the low level HW interaction for ILT management and 627 * configuration. The API consists of a shadow ILT table which is set by the 628 * driver and a set of routines to use it to configure the HW. 629 * 630 */ 631 632 /* ILT HW init operations */ 633 634 /* ILT memory management operations */ 635 #define ILT_MEMOP_ALLOC 0 636 #define ILT_MEMOP_FREE 1 637 638 /* the phys address is shifted right 12 bits and has an added 639 * 1=valid bit added to the 53rd bit 640 * then since this is a wide register(TM) 641 * we split it into two 32 bit writes 642 */ 643 #define ILT_ADDR1(x) ((uint32_t)(((uint64_t)x >> 12) & 0xFFFFFFFF)) 644 #define ILT_ADDR2(x) ((uint32_t)((1 << 20) | ((uint64_t)x >> 44))) 645 #define ILT_RANGE(f, l) (((l) << 10) | f) 646 647 static int ecore_ilt_line_mem_op(struct bxe_softc *sc, 648 struct ilt_line *line, uint32_t size, uint8_t memop) 649 { 650 if (memop == ILT_MEMOP_FREE) { 651 ECORE_ILT_FREE(line->page, line->page_mapping, line->size); 652 return 0; 653 } 654 ECORE_ILT_ZALLOC(line->page, &line->page_mapping, size); 655 if (!line->page) 656 return -1; 657 line->size = size; 658 return 0; 659 } 660 661 662 static int ecore_ilt_client_mem_op(struct bxe_softc *sc, int cli_num, 663 uint8_t memop) 664 { 665 int i, rc; 666 struct ecore_ilt *ilt = SC_ILT(sc); 667 struct ilt_client_info *ilt_cli = &ilt->clients[cli_num]; 668 669 if (!ilt || !ilt->lines) 670 return -1; 671 672 if (ilt_cli->flags & (ILT_CLIENT_SKIP_INIT | ILT_CLIENT_SKIP_MEM)) 673 return 0; 674 675 for (rc = 0, i = ilt_cli->start; i <= ilt_cli->end && !rc; i++) { 676 rc = ecore_ilt_line_mem_op(sc, &ilt->lines[i], 677 ilt_cli->page_size, memop); 678 } 679 return rc; 680 } 681 682 static inline int ecore_ilt_mem_op_cnic(struct bxe_softc *sc, uint8_t memop) 683 { 684 int rc = 0; 685 686 if (CONFIGURE_NIC_MODE(sc)) 687 rc = ecore_ilt_client_mem_op(sc, ILT_CLIENT_SRC, memop); 688 if (!rc) 689 rc = ecore_ilt_client_mem_op(sc, ILT_CLIENT_TM, memop); 690 691 return rc; 692 } 693 694 static int ecore_ilt_mem_op(struct bxe_softc *sc, uint8_t memop) 695 { 696 int rc = ecore_ilt_client_mem_op(sc, ILT_CLIENT_CDU, memop); 697 if (!rc) 698 rc = ecore_ilt_client_mem_op(sc, ILT_CLIENT_QM, memop); 699 if (!rc && CNIC_SUPPORT(sc) && !CONFIGURE_NIC_MODE(sc)) 700 rc = ecore_ilt_client_mem_op(sc, ILT_CLIENT_SRC, memop); 701 702 return rc; 703 } 704 705 static void ecore_ilt_line_wr(struct bxe_softc *sc, int abs_idx, 706 ecore_dma_addr_t page_mapping) 707 { 708 uint32_t reg; 709 710 if (CHIP_IS_E1(sc)) 711 reg = PXP2_REG_RQ_ONCHIP_AT + abs_idx*8; 712 else 713 reg = PXP2_REG_RQ_ONCHIP_AT_B0 + abs_idx*8; 714 715 ecore_wr_64(sc, reg, ILT_ADDR1(page_mapping), ILT_ADDR2(page_mapping)); 716 } 717 718 static void ecore_ilt_line_init_op(struct bxe_softc *sc, 719 struct ecore_ilt *ilt, int idx, uint8_t initop) 720 { 721 ecore_dma_addr_t null_mapping; 722 int abs_idx = ilt->start_line + idx; 723 724 725 switch (initop) { 726 case INITOP_INIT: 727 /* set in the init-value array */ 728 case INITOP_SET: 729 ecore_ilt_line_wr(sc, abs_idx, ilt->lines[idx].page_mapping); 730 break; 731 case INITOP_CLEAR: 732 null_mapping = 0; 733 ecore_ilt_line_wr(sc, abs_idx, null_mapping); 734 break; 735 } 736 } 737 738 static void ecore_ilt_boundry_init_op(struct bxe_softc *sc, 739 struct ilt_client_info *ilt_cli, 740 uint32_t ilt_start, uint8_t initop) 741 { 742 uint32_t start_reg = 0; 743 uint32_t end_reg = 0; 744 745 /* The boundary is either SET or INIT, 746 CLEAR => SET and for now SET ~~ INIT */ 747 748 /* find the appropriate regs */ 749 if (CHIP_IS_E1(sc)) { 750 switch (ilt_cli->client_num) { 751 case ILT_CLIENT_CDU: 752 start_reg = PXP2_REG_PSWRQ_CDU0_L2P; 753 break; 754 case ILT_CLIENT_QM: 755 start_reg = PXP2_REG_PSWRQ_QM0_L2P; 756 break; 757 case ILT_CLIENT_SRC: 758 start_reg = PXP2_REG_PSWRQ_SRC0_L2P; 759 break; 760 case ILT_CLIENT_TM: 761 start_reg = PXP2_REG_PSWRQ_TM0_L2P; 762 break; 763 } 764 REG_WR(sc, start_reg + SC_FUNC(sc)*4, 765 ILT_RANGE((ilt_start + ilt_cli->start), 766 (ilt_start + ilt_cli->end))); 767 } else { 768 switch (ilt_cli->client_num) { 769 case ILT_CLIENT_CDU: 770 start_reg = PXP2_REG_RQ_CDU_FIRST_ILT; 771 end_reg = PXP2_REG_RQ_CDU_LAST_ILT; 772 break; 773 case ILT_CLIENT_QM: 774 start_reg = PXP2_REG_RQ_QM_FIRST_ILT; 775 end_reg = PXP2_REG_RQ_QM_LAST_ILT; 776 break; 777 case ILT_CLIENT_SRC: 778 start_reg = PXP2_REG_RQ_SRC_FIRST_ILT; 779 end_reg = PXP2_REG_RQ_SRC_LAST_ILT; 780 break; 781 case ILT_CLIENT_TM: 782 start_reg = PXP2_REG_RQ_TM_FIRST_ILT; 783 end_reg = PXP2_REG_RQ_TM_LAST_ILT; 784 break; 785 } 786 REG_WR(sc, start_reg, (ilt_start + ilt_cli->start)); 787 REG_WR(sc, end_reg, (ilt_start + ilt_cli->end)); 788 } 789 } 790 791 static void ecore_ilt_client_init_op_ilt(struct bxe_softc *sc, 792 struct ecore_ilt *ilt, 793 struct ilt_client_info *ilt_cli, 794 uint8_t initop) 795 { 796 int i; 797 798 if (ilt_cli->flags & ILT_CLIENT_SKIP_INIT) 799 return; 800 801 for (i = ilt_cli->start; i <= ilt_cli->end; i++) 802 ecore_ilt_line_init_op(sc, ilt, i, initop); 803 804 /* init/clear the ILT boundries */ 805 ecore_ilt_boundry_init_op(sc, ilt_cli, ilt->start_line, initop); 806 } 807 808 static void ecore_ilt_client_init_op(struct bxe_softc *sc, 809 struct ilt_client_info *ilt_cli, uint8_t initop) 810 { 811 struct ecore_ilt *ilt = SC_ILT(sc); 812 813 ecore_ilt_client_init_op_ilt(sc, ilt, ilt_cli, initop); 814 } 815 816 static void ecore_ilt_client_id_init_op(struct bxe_softc *sc, 817 int cli_num, uint8_t initop) 818 { 819 struct ecore_ilt *ilt = SC_ILT(sc); 820 struct ilt_client_info *ilt_cli = &ilt->clients[cli_num]; 821 822 ecore_ilt_client_init_op(sc, ilt_cli, initop); 823 } 824 825 static inline void ecore_ilt_init_op_cnic(struct bxe_softc *sc, uint8_t initop) 826 { 827 if (CONFIGURE_NIC_MODE(sc)) 828 ecore_ilt_client_id_init_op(sc, ILT_CLIENT_SRC, initop); 829 ecore_ilt_client_id_init_op(sc, ILT_CLIENT_TM, initop); 830 } 831 832 static void ecore_ilt_init_op(struct bxe_softc *sc, uint8_t initop) 833 { 834 ecore_ilt_client_id_init_op(sc, ILT_CLIENT_CDU, initop); 835 ecore_ilt_client_id_init_op(sc, ILT_CLIENT_QM, initop); 836 if (CNIC_SUPPORT(sc) && !CONFIGURE_NIC_MODE(sc)) 837 ecore_ilt_client_id_init_op(sc, ILT_CLIENT_SRC, initop); 838 } 839 840 static void ecore_ilt_init_client_psz(struct bxe_softc *sc, int cli_num, 841 uint32_t psz_reg, uint8_t initop) 842 { 843 struct ecore_ilt *ilt = SC_ILT(sc); 844 struct ilt_client_info *ilt_cli = &ilt->clients[cli_num]; 845 846 if (ilt_cli->flags & ILT_CLIENT_SKIP_INIT) 847 return; 848 849 switch (initop) { 850 case INITOP_INIT: 851 /* set in the init-value array */ 852 case INITOP_SET: 853 REG_WR(sc, psz_reg, ILOG2(ilt_cli->page_size >> 12)); 854 break; 855 case INITOP_CLEAR: 856 break; 857 } 858 } 859 860 /* 861 * called during init common stage, ilt clients should be initialized 862 * prioir to calling this function 863 */ 864 static void ecore_ilt_init_page_size(struct bxe_softc *sc, uint8_t initop) 865 { 866 ecore_ilt_init_client_psz(sc, ILT_CLIENT_CDU, 867 PXP2_REG_RQ_CDU_P_SIZE, initop); 868 ecore_ilt_init_client_psz(sc, ILT_CLIENT_QM, 869 PXP2_REG_RQ_QM_P_SIZE, initop); 870 ecore_ilt_init_client_psz(sc, ILT_CLIENT_SRC, 871 PXP2_REG_RQ_SRC_P_SIZE, initop); 872 ecore_ilt_init_client_psz(sc, ILT_CLIENT_TM, 873 PXP2_REG_RQ_TM_P_SIZE, initop); 874 } 875 876 /**************************************************************************** 877 * QM initializations 878 ****************************************************************************/ 879 #define QM_QUEUES_PER_FUNC 16 /* E1 has 32, but only 16 are used */ 880 #define QM_INIT_MIN_CID_COUNT 31 881 #define QM_INIT(cid_cnt) (cid_cnt > QM_INIT_MIN_CID_COUNT) 882 883 /* called during init port stage */ 884 static void ecore_qm_init_cid_count(struct bxe_softc *sc, int qm_cid_count, 885 uint8_t initop) 886 { 887 int port = SC_PORT(sc); 888 889 if (QM_INIT(qm_cid_count)) { 890 switch (initop) { 891 case INITOP_INIT: 892 /* set in the init-value array */ 893 case INITOP_SET: 894 REG_WR(sc, QM_REG_CONNNUM_0 + port*4, 895 qm_cid_count/16 - 1); 896 break; 897 case INITOP_CLEAR: 898 break; 899 } 900 } 901 } 902 903 static void ecore_qm_set_ptr_table(struct bxe_softc *sc, int qm_cid_count, 904 uint32_t base_reg, uint32_t reg) 905 { 906 int i; 907 uint32_t wb_data[2] = {0, 0}; 908 for (i = 0; i < 4 * QM_QUEUES_PER_FUNC; i++) { 909 REG_WR(sc, base_reg + i*4, 910 qm_cid_count * 4 * (i % QM_QUEUES_PER_FUNC)); 911 ecore_init_wr_wb(sc, reg + i*8, 912 wb_data, 2); 913 } 914 } 915 916 /* called during init common stage */ 917 static void ecore_qm_init_ptr_table(struct bxe_softc *sc, int qm_cid_count, 918 uint8_t initop) 919 { 920 if (!QM_INIT(qm_cid_count)) 921 return; 922 923 switch (initop) { 924 case INITOP_INIT: 925 /* set in the init-value array */ 926 case INITOP_SET: 927 ecore_qm_set_ptr_table(sc, qm_cid_count, 928 QM_REG_BASEADDR, QM_REG_PTRTBL); 929 if (CHIP_IS_E1H(sc)) 930 ecore_qm_set_ptr_table(sc, qm_cid_count, 931 QM_REG_BASEADDR_EXT_A, 932 QM_REG_PTRTBL_EXT_A); 933 break; 934 case INITOP_CLEAR: 935 break; 936 } 937 } 938 939 /**************************************************************************** 940 * SRC initializations 941 ****************************************************************************/ 942 #ifdef ECORE_L5 943 /* called during init func stage */ 944 static void ecore_src_init_t2(struct bxe_softc *sc, struct src_ent *t2, 945 ecore_dma_addr_t t2_mapping, int src_cid_count) 946 { 947 int i; 948 int port = SC_PORT(sc); 949 950 /* Initialize T2 */ 951 for (i = 0; i < src_cid_count-1; i++) 952 t2[i].next = (uint64_t)(t2_mapping + 953 (i+1)*sizeof(struct src_ent)); 954 955 /* tell the searcher where the T2 table is */ 956 REG_WR(sc, SRC_REG_COUNTFREE0 + port*4, src_cid_count); 957 958 ecore_wr_64(sc, SRC_REG_FIRSTFREE0 + port*16, 959 U64_LO(t2_mapping), U64_HI(t2_mapping)); 960 961 ecore_wr_64(sc, SRC_REG_LASTFREE0 + port*16, 962 U64_LO((uint64_t)t2_mapping + 963 (src_cid_count-1) * sizeof(struct src_ent)), 964 U64_HI((uint64_t)t2_mapping + 965 (src_cid_count-1) * sizeof(struct src_ent))); 966 } 967 #endif 968 #endif /* ECORE_INIT_OPS_H */ 969