1 /*- 2 * Copyright (c) 2001 Wind River Systems 3 * Copyright (c) 1997, 1998, 1999, 2001 4 * Bill Paul <wpaul@windriver.com>. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. All advertising materials mentioning features or use of this software 15 * must display the following acknowledgement: 16 * This product includes software developed by Bill Paul. 17 * 4. Neither the name of the author nor the names of any co-contributors 18 * may be used to endorse or promote products derived from this software 19 * without specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 24 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 25 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 26 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 27 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 28 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 29 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 30 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 31 * THE POSSIBILITY OF SUCH DAMAGE. 32 */ 33 34 #include <sys/cdefs.h> 35 __FBSDID("$FreeBSD$"); 36 37 /* 38 * Broadcom BCM570x family gigabit ethernet driver for FreeBSD. 39 * 40 * The Broadcom BCM5700 is based on technology originally developed by 41 * Alteon Networks as part of the Tigon I and Tigon II gigabit ethernet 42 * MAC chips. The BCM5700, sometimes refered to as the Tigon III, has 43 * two on-board MIPS R4000 CPUs and can have as much as 16MB of external 44 * SSRAM. The BCM5700 supports TCP, UDP and IP checksum offload, jumbo 45 * frames, highly configurable RX filtering, and 16 RX and TX queues 46 * (which, along with RX filter rules, can be used for QOS applications). 47 * Other features, such as TCP segmentation, may be available as part 48 * of value-added firmware updates. Unlike the Tigon I and Tigon II, 49 * firmware images can be stored in hardware and need not be compiled 50 * into the driver. 51 * 52 * The BCM5700 supports the PCI v2.2 and PCI-X v1.0 standards, and will 53 * function in a 32-bit/64-bit 33/66Mhz bus, or a 64-bit/133Mhz bus. 54 * 55 * The BCM5701 is a single-chip solution incorporating both the BCM5700 56 * MAC and a BCM5401 10/100/1000 PHY. Unlike the BCM5700, the BCM5701 57 * does not support external SSRAM. 58 * 59 * Broadcom also produces a variation of the BCM5700 under the "Altima" 60 * brand name, which is functionally similar but lacks PCI-X support. 61 * 62 * Without external SSRAM, you can only have at most 4 TX rings, 63 * and the use of the mini RX ring is disabled. This seems to imply 64 * that these features are simply not available on the BCM5701. As a 65 * result, this driver does not implement any support for the mini RX 66 * ring. 67 */ 68 69 #ifdef HAVE_KERNEL_OPTION_HEADERS 70 #include "opt_device_polling.h" 71 #endif 72 73 #include <sys/param.h> 74 #include <sys/endian.h> 75 #include <sys/systm.h> 76 #include <sys/sockio.h> 77 #include <sys/mbuf.h> 78 #include <sys/malloc.h> 79 #include <sys/kernel.h> 80 #include <sys/module.h> 81 #include <sys/socket.h> 82 #include <sys/sysctl.h> 83 84 #include <net/if.h> 85 #include <net/if_arp.h> 86 #include <net/ethernet.h> 87 #include <net/if_dl.h> 88 #include <net/if_media.h> 89 90 #include <net/bpf.h> 91 92 #include <net/if_types.h> 93 #include <net/if_vlan_var.h> 94 95 #include <netinet/in_systm.h> 96 #include <netinet/in.h> 97 #include <netinet/ip.h> 98 99 #include <machine/bus.h> 100 #include <machine/resource.h> 101 #include <sys/bus.h> 102 #include <sys/rman.h> 103 104 #include <dev/mii/mii.h> 105 #include <dev/mii/miivar.h> 106 #include "miidevs.h" 107 #include <dev/mii/brgphyreg.h> 108 109 #ifdef __sparc64__ 110 #include <dev/ofw/ofw_bus.h> 111 #include <dev/ofw/openfirm.h> 112 #include <machine/ofw_machdep.h> 113 #include <machine/ver.h> 114 #endif 115 116 #include <dev/pci/pcireg.h> 117 #include <dev/pci/pcivar.h> 118 119 #include <dev/bge/if_bgereg.h> 120 121 #define BGE_CSUM_FEATURES (CSUM_IP | CSUM_TCP | CSUM_UDP) 122 #define ETHER_MIN_NOPAD (ETHER_MIN_LEN - ETHER_CRC_LEN) /* i.e., 60 */ 123 124 MODULE_DEPEND(bge, pci, 1, 1, 1); 125 MODULE_DEPEND(bge, ether, 1, 1, 1); 126 MODULE_DEPEND(bge, miibus, 1, 1, 1); 127 128 /* "device miibus" required. See GENERIC if you get errors here. */ 129 #include "miibus_if.h" 130 131 /* 132 * Various supported device vendors/types and their names. Note: the 133 * spec seems to indicate that the hardware still has Alteon's vendor 134 * ID burned into it, though it will always be overriden by the vendor 135 * ID in the EEPROM. Just to be safe, we cover all possibilities. 136 */ 137 static const struct bge_type { 138 uint16_t bge_vid; 139 uint16_t bge_did; 140 } bge_devs[] = { 141 { ALTEON_VENDORID, ALTEON_DEVICEID_BCM5700 }, 142 { ALTEON_VENDORID, ALTEON_DEVICEID_BCM5701 }, 143 144 { ALTIMA_VENDORID, ALTIMA_DEVICE_AC1000 }, 145 { ALTIMA_VENDORID, ALTIMA_DEVICE_AC1002 }, 146 { ALTIMA_VENDORID, ALTIMA_DEVICE_AC9100 }, 147 148 { APPLE_VENDORID, APPLE_DEVICE_BCM5701 }, 149 150 { BCOM_VENDORID, BCOM_DEVICEID_BCM5700 }, 151 { BCOM_VENDORID, BCOM_DEVICEID_BCM5701 }, 152 { BCOM_VENDORID, BCOM_DEVICEID_BCM5702 }, 153 { BCOM_VENDORID, BCOM_DEVICEID_BCM5702_ALT }, 154 { BCOM_VENDORID, BCOM_DEVICEID_BCM5702X }, 155 { BCOM_VENDORID, BCOM_DEVICEID_BCM5703 }, 156 { BCOM_VENDORID, BCOM_DEVICEID_BCM5703_ALT }, 157 { BCOM_VENDORID, BCOM_DEVICEID_BCM5703X }, 158 { BCOM_VENDORID, BCOM_DEVICEID_BCM5704C }, 159 { BCOM_VENDORID, BCOM_DEVICEID_BCM5704S }, 160 { BCOM_VENDORID, BCOM_DEVICEID_BCM5704S_ALT }, 161 { BCOM_VENDORID, BCOM_DEVICEID_BCM5705 }, 162 { BCOM_VENDORID, BCOM_DEVICEID_BCM5705F }, 163 { BCOM_VENDORID, BCOM_DEVICEID_BCM5705K }, 164 { BCOM_VENDORID, BCOM_DEVICEID_BCM5705M }, 165 { BCOM_VENDORID, BCOM_DEVICEID_BCM5705M_ALT }, 166 { BCOM_VENDORID, BCOM_DEVICEID_BCM5714C }, 167 { BCOM_VENDORID, BCOM_DEVICEID_BCM5714S }, 168 { BCOM_VENDORID, BCOM_DEVICEID_BCM5715 }, 169 { BCOM_VENDORID, BCOM_DEVICEID_BCM5715S }, 170 { BCOM_VENDORID, BCOM_DEVICEID_BCM5720 }, 171 { BCOM_VENDORID, BCOM_DEVICEID_BCM5721 }, 172 { BCOM_VENDORID, BCOM_DEVICEID_BCM5722 }, 173 { BCOM_VENDORID, BCOM_DEVICEID_BCM5750 }, 174 { BCOM_VENDORID, BCOM_DEVICEID_BCM5750M }, 175 { BCOM_VENDORID, BCOM_DEVICEID_BCM5751 }, 176 { BCOM_VENDORID, BCOM_DEVICEID_BCM5751F }, 177 { BCOM_VENDORID, BCOM_DEVICEID_BCM5751M }, 178 { BCOM_VENDORID, BCOM_DEVICEID_BCM5752 }, 179 { BCOM_VENDORID, BCOM_DEVICEID_BCM5752M }, 180 { BCOM_VENDORID, BCOM_DEVICEID_BCM5753 }, 181 { BCOM_VENDORID, BCOM_DEVICEID_BCM5753F }, 182 { BCOM_VENDORID, BCOM_DEVICEID_BCM5753M }, 183 { BCOM_VENDORID, BCOM_DEVICEID_BCM5754 }, 184 { BCOM_VENDORID, BCOM_DEVICEID_BCM5754M }, 185 { BCOM_VENDORID, BCOM_DEVICEID_BCM5755 }, 186 { BCOM_VENDORID, BCOM_DEVICEID_BCM5755M }, 187 { BCOM_VENDORID, BCOM_DEVICEID_BCM5780 }, 188 { BCOM_VENDORID, BCOM_DEVICEID_BCM5780S }, 189 { BCOM_VENDORID, BCOM_DEVICEID_BCM5781 }, 190 { BCOM_VENDORID, BCOM_DEVICEID_BCM5782 }, 191 { BCOM_VENDORID, BCOM_DEVICEID_BCM5786 }, 192 { BCOM_VENDORID, BCOM_DEVICEID_BCM5787 }, 193 { BCOM_VENDORID, BCOM_DEVICEID_BCM5787M }, 194 { BCOM_VENDORID, BCOM_DEVICEID_BCM5788 }, 195 { BCOM_VENDORID, BCOM_DEVICEID_BCM5789 }, 196 { BCOM_VENDORID, BCOM_DEVICEID_BCM5901 }, 197 { BCOM_VENDORID, BCOM_DEVICEID_BCM5901A2 }, 198 { BCOM_VENDORID, BCOM_DEVICEID_BCM5903M }, 199 { BCOM_VENDORID, BCOM_DEVICEID_BCM5906 }, 200 { BCOM_VENDORID, BCOM_DEVICEID_BCM5906M }, 201 202 { SK_VENDORID, SK_DEVICEID_ALTIMA }, 203 204 { TC_VENDORID, TC_DEVICEID_3C996 }, 205 206 { 0, 0 } 207 }; 208 209 static const struct bge_vendor { 210 uint16_t v_id; 211 const char *v_name; 212 } bge_vendors[] = { 213 { ALTEON_VENDORID, "Alteon" }, 214 { ALTIMA_VENDORID, "Altima" }, 215 { APPLE_VENDORID, "Apple" }, 216 { BCOM_VENDORID, "Broadcom" }, 217 { SK_VENDORID, "SysKonnect" }, 218 { TC_VENDORID, "3Com" }, 219 220 { 0, NULL } 221 }; 222 223 static const struct bge_revision { 224 uint32_t br_chipid; 225 const char *br_name; 226 } bge_revisions[] = { 227 { BGE_CHIPID_BCM5700_A0, "BCM5700 A0" }, 228 { BGE_CHIPID_BCM5700_A1, "BCM5700 A1" }, 229 { BGE_CHIPID_BCM5700_B0, "BCM5700 B0" }, 230 { BGE_CHIPID_BCM5700_B1, "BCM5700 B1" }, 231 { BGE_CHIPID_BCM5700_B2, "BCM5700 B2" }, 232 { BGE_CHIPID_BCM5700_B3, "BCM5700 B3" }, 233 { BGE_CHIPID_BCM5700_ALTIMA, "BCM5700 Altima" }, 234 { BGE_CHIPID_BCM5700_C0, "BCM5700 C0" }, 235 { BGE_CHIPID_BCM5701_A0, "BCM5701 A0" }, 236 { BGE_CHIPID_BCM5701_B0, "BCM5701 B0" }, 237 { BGE_CHIPID_BCM5701_B2, "BCM5701 B2" }, 238 { BGE_CHIPID_BCM5701_B5, "BCM5701 B5" }, 239 { BGE_CHIPID_BCM5703_A0, "BCM5703 A0" }, 240 { BGE_CHIPID_BCM5703_A1, "BCM5703 A1" }, 241 { BGE_CHIPID_BCM5703_A2, "BCM5703 A2" }, 242 { BGE_CHIPID_BCM5703_A3, "BCM5703 A3" }, 243 { BGE_CHIPID_BCM5703_B0, "BCM5703 B0" }, 244 { BGE_CHIPID_BCM5704_A0, "BCM5704 A0" }, 245 { BGE_CHIPID_BCM5704_A1, "BCM5704 A1" }, 246 { BGE_CHIPID_BCM5704_A2, "BCM5704 A2" }, 247 { BGE_CHIPID_BCM5704_A3, "BCM5704 A3" }, 248 { BGE_CHIPID_BCM5704_B0, "BCM5704 B0" }, 249 { BGE_CHIPID_BCM5705_A0, "BCM5705 A0" }, 250 { BGE_CHIPID_BCM5705_A1, "BCM5705 A1" }, 251 { BGE_CHIPID_BCM5705_A2, "BCM5705 A2" }, 252 { BGE_CHIPID_BCM5705_A3, "BCM5705 A3" }, 253 { BGE_CHIPID_BCM5750_A0, "BCM5750 A0" }, 254 { BGE_CHIPID_BCM5750_A1, "BCM5750 A1" }, 255 { BGE_CHIPID_BCM5750_A3, "BCM5750 A3" }, 256 { BGE_CHIPID_BCM5750_B0, "BCM5750 B0" }, 257 { BGE_CHIPID_BCM5750_B1, "BCM5750 B1" }, 258 { BGE_CHIPID_BCM5750_C0, "BCM5750 C0" }, 259 { BGE_CHIPID_BCM5750_C1, "BCM5750 C1" }, 260 { BGE_CHIPID_BCM5750_C2, "BCM5750 C2" }, 261 { BGE_CHIPID_BCM5714_A0, "BCM5714 A0" }, 262 { BGE_CHIPID_BCM5752_A0, "BCM5752 A0" }, 263 { BGE_CHIPID_BCM5752_A1, "BCM5752 A1" }, 264 { BGE_CHIPID_BCM5752_A2, "BCM5752 A2" }, 265 { BGE_CHIPID_BCM5714_B0, "BCM5714 B0" }, 266 { BGE_CHIPID_BCM5714_B3, "BCM5714 B3" }, 267 { BGE_CHIPID_BCM5715_A0, "BCM5715 A0" }, 268 { BGE_CHIPID_BCM5715_A1, "BCM5715 A1" }, 269 { BGE_CHIPID_BCM5715_A3, "BCM5715 A3" }, 270 { BGE_CHIPID_BCM5755_A0, "BCM5755 A0" }, 271 { BGE_CHIPID_BCM5755_A1, "BCM5755 A1" }, 272 { BGE_CHIPID_BCM5755_A2, "BCM5755 A2" }, 273 { BGE_CHIPID_BCM5722_A0, "BCM5722 A0" }, 274 /* 5754 and 5787 share the same ASIC ID */ 275 { BGE_CHIPID_BCM5787_A0, "BCM5754/5787 A0" }, 276 { BGE_CHIPID_BCM5787_A1, "BCM5754/5787 A1" }, 277 { BGE_CHIPID_BCM5787_A2, "BCM5754/5787 A2" }, 278 { BGE_CHIPID_BCM5906_A1, "BCM5906 A1" }, 279 { BGE_CHIPID_BCM5906_A2, "BCM5906 A2" }, 280 281 { 0, NULL } 282 }; 283 284 /* 285 * Some defaults for major revisions, so that newer steppings 286 * that we don't know about have a shot at working. 287 */ 288 static const struct bge_revision bge_majorrevs[] = { 289 { BGE_ASICREV_BCM5700, "unknown BCM5700" }, 290 { BGE_ASICREV_BCM5701, "unknown BCM5701" }, 291 { BGE_ASICREV_BCM5703, "unknown BCM5703" }, 292 { BGE_ASICREV_BCM5704, "unknown BCM5704" }, 293 { BGE_ASICREV_BCM5705, "unknown BCM5705" }, 294 { BGE_ASICREV_BCM5750, "unknown BCM5750" }, 295 { BGE_ASICREV_BCM5714_A0, "unknown BCM5714" }, 296 { BGE_ASICREV_BCM5752, "unknown BCM5752" }, 297 { BGE_ASICREV_BCM5780, "unknown BCM5780" }, 298 { BGE_ASICREV_BCM5714, "unknown BCM5714" }, 299 { BGE_ASICREV_BCM5755, "unknown BCM5755" }, 300 /* 5754 and 5787 share the same ASIC ID */ 301 { BGE_ASICREV_BCM5787, "unknown BCM5754/5787" }, 302 { BGE_ASICREV_BCM5906, "unknown BCM5906" }, 303 304 { 0, NULL } 305 }; 306 307 #define BGE_IS_JUMBO_CAPABLE(sc) ((sc)->bge_flags & BGE_FLAG_JUMBO) 308 #define BGE_IS_5700_FAMILY(sc) ((sc)->bge_flags & BGE_FLAG_5700_FAMILY) 309 #define BGE_IS_5705_PLUS(sc) ((sc)->bge_flags & BGE_FLAG_5705_PLUS) 310 #define BGE_IS_5714_FAMILY(sc) ((sc)->bge_flags & BGE_FLAG_5714_FAMILY) 311 #define BGE_IS_575X_PLUS(sc) ((sc)->bge_flags & BGE_FLAG_575X_PLUS) 312 313 const struct bge_revision * bge_lookup_rev(uint32_t); 314 const struct bge_vendor * bge_lookup_vendor(uint16_t); 315 316 typedef int (*bge_eaddr_fcn_t)(struct bge_softc *, uint8_t[]); 317 318 static int bge_probe(device_t); 319 static int bge_attach(device_t); 320 static int bge_detach(device_t); 321 static int bge_suspend(device_t); 322 static int bge_resume(device_t); 323 static void bge_release_resources(struct bge_softc *); 324 static void bge_dma_map_addr(void *, bus_dma_segment_t *, int, int); 325 static int bge_dma_alloc(device_t); 326 static void bge_dma_free(struct bge_softc *); 327 328 static int bge_get_eaddr_fw(struct bge_softc *sc, uint8_t ether_addr[]); 329 static int bge_get_eaddr_mem(struct bge_softc *, uint8_t[]); 330 static int bge_get_eaddr_nvram(struct bge_softc *, uint8_t[]); 331 static int bge_get_eaddr_eeprom(struct bge_softc *, uint8_t[]); 332 static int bge_get_eaddr(struct bge_softc *, uint8_t[]); 333 334 static void bge_txeof(struct bge_softc *); 335 static void bge_rxeof(struct bge_softc *); 336 337 static void bge_asf_driver_up (struct bge_softc *); 338 static void bge_tick(void *); 339 static void bge_stats_update(struct bge_softc *); 340 static void bge_stats_update_regs(struct bge_softc *); 341 static int bge_encap(struct bge_softc *, struct mbuf **, uint32_t *); 342 343 static void bge_intr(void *); 344 static void bge_start_locked(struct ifnet *); 345 static void bge_start(struct ifnet *); 346 static int bge_ioctl(struct ifnet *, u_long, caddr_t); 347 static void bge_init_locked(struct bge_softc *); 348 static void bge_init(void *); 349 static void bge_stop(struct bge_softc *); 350 static void bge_watchdog(struct bge_softc *); 351 static void bge_shutdown(device_t); 352 static int bge_ifmedia_upd_locked(struct ifnet *); 353 static int bge_ifmedia_upd(struct ifnet *); 354 static void bge_ifmedia_sts(struct ifnet *, struct ifmediareq *); 355 356 static uint8_t bge_nvram_getbyte(struct bge_softc *, int, uint8_t *); 357 static int bge_read_nvram(struct bge_softc *, caddr_t, int, int); 358 359 static uint8_t bge_eeprom_getbyte(struct bge_softc *, int, uint8_t *); 360 static int bge_read_eeprom(struct bge_softc *, caddr_t, int, int); 361 362 static void bge_setpromisc(struct bge_softc *); 363 static void bge_setmulti(struct bge_softc *); 364 static void bge_setvlan(struct bge_softc *); 365 366 static int bge_newbuf_std(struct bge_softc *, int, struct mbuf *); 367 static int bge_newbuf_jumbo(struct bge_softc *, int, struct mbuf *); 368 static int bge_init_rx_ring_std(struct bge_softc *); 369 static void bge_free_rx_ring_std(struct bge_softc *); 370 static int bge_init_rx_ring_jumbo(struct bge_softc *); 371 static void bge_free_rx_ring_jumbo(struct bge_softc *); 372 static void bge_free_tx_ring(struct bge_softc *); 373 static int bge_init_tx_ring(struct bge_softc *); 374 375 static int bge_chipinit(struct bge_softc *); 376 static int bge_blockinit(struct bge_softc *); 377 378 static int bge_has_eaddr(struct bge_softc *); 379 static uint32_t bge_readmem_ind(struct bge_softc *, int); 380 static void bge_writemem_ind(struct bge_softc *, int, int); 381 static void bge_writembx(struct bge_softc *, int, int); 382 #ifdef notdef 383 static uint32_t bge_readreg_ind(struct bge_softc *, int); 384 #endif 385 static void bge_writemem_direct(struct bge_softc *, int, int); 386 static void bge_writereg_ind(struct bge_softc *, int, int); 387 388 static int bge_miibus_readreg(device_t, int, int); 389 static int bge_miibus_writereg(device_t, int, int, int); 390 static void bge_miibus_statchg(device_t); 391 #ifdef DEVICE_POLLING 392 static void bge_poll(struct ifnet *ifp, enum poll_cmd cmd, int count); 393 #endif 394 395 #define BGE_RESET_START 1 396 #define BGE_RESET_STOP 2 397 static void bge_sig_post_reset(struct bge_softc *, int); 398 static void bge_sig_legacy(struct bge_softc *, int); 399 static void bge_sig_pre_reset(struct bge_softc *, int); 400 static int bge_reset(struct bge_softc *); 401 static void bge_link_upd(struct bge_softc *); 402 403 /* 404 * The BGE_REGISTER_DEBUG option is only for low-level debugging. It may 405 * leak information to untrusted users. It is also known to cause alignment 406 * traps on certain architectures. 407 */ 408 #ifdef BGE_REGISTER_DEBUG 409 static int bge_sysctl_debug_info(SYSCTL_HANDLER_ARGS); 410 static int bge_sysctl_reg_read(SYSCTL_HANDLER_ARGS); 411 static int bge_sysctl_mem_read(SYSCTL_HANDLER_ARGS); 412 #endif 413 static void bge_add_sysctls(struct bge_softc *); 414 static int bge_sysctl_stats(SYSCTL_HANDLER_ARGS); 415 416 static device_method_t bge_methods[] = { 417 /* Device interface */ 418 DEVMETHOD(device_probe, bge_probe), 419 DEVMETHOD(device_attach, bge_attach), 420 DEVMETHOD(device_detach, bge_detach), 421 DEVMETHOD(device_shutdown, bge_shutdown), 422 DEVMETHOD(device_suspend, bge_suspend), 423 DEVMETHOD(device_resume, bge_resume), 424 425 /* bus interface */ 426 DEVMETHOD(bus_print_child, bus_generic_print_child), 427 DEVMETHOD(bus_driver_added, bus_generic_driver_added), 428 429 /* MII interface */ 430 DEVMETHOD(miibus_readreg, bge_miibus_readreg), 431 DEVMETHOD(miibus_writereg, bge_miibus_writereg), 432 DEVMETHOD(miibus_statchg, bge_miibus_statchg), 433 434 { 0, 0 } 435 }; 436 437 static driver_t bge_driver = { 438 "bge", 439 bge_methods, 440 sizeof(struct bge_softc) 441 }; 442 443 static devclass_t bge_devclass; 444 445 DRIVER_MODULE(bge, pci, bge_driver, bge_devclass, 0, 0); 446 DRIVER_MODULE(miibus, bge, miibus_driver, miibus_devclass, 0, 0); 447 448 static int bge_allow_asf = 1; 449 450 TUNABLE_INT("hw.bge.allow_asf", &bge_allow_asf); 451 452 SYSCTL_NODE(_hw, OID_AUTO, bge, CTLFLAG_RD, 0, "BGE driver parameters"); 453 SYSCTL_INT(_hw_bge, OID_AUTO, allow_asf, CTLFLAG_RD, &bge_allow_asf, 0, 454 "Allow ASF mode if available"); 455 456 #define SPARC64_BLADE_1500_MODEL "SUNW,Sun-Blade-1500" 457 #define SPARC64_BLADE_1500_PATH_BGE "/pci@1f,700000/network@2" 458 #define SPARC64_BLADE_2500_MODEL "SUNW,Sun-Blade-2500" 459 #define SPARC64_BLADE_2500_PATH_BGE "/pci@1c,600000/network@3" 460 #define SPARC64_OFW_SUBVENDOR "subsystem-vendor-id" 461 462 static int 463 bge_has_eaddr(struct bge_softc *sc) 464 { 465 #ifdef __sparc64__ 466 char buf[sizeof(SPARC64_BLADE_1500_PATH_BGE)]; 467 device_t dev; 468 uint32_t subvendor; 469 470 dev = sc->bge_dev; 471 472 /* 473 * The on-board BGEs found in sun4u machines aren't fitted with 474 * an EEPROM which means that we have to obtain the MAC address 475 * via OFW and that some tests will always fail. We distinguish 476 * such BGEs by the subvendor ID, which also has to be obtained 477 * from OFW instead of the PCI configuration space as the latter 478 * indicates Broadcom as the subvendor of the netboot interface. 479 * For early Blade 1500 and 2500 we even have to check the OFW 480 * device path as the subvendor ID always defaults to Broadcom 481 * there. 482 */ 483 if (OF_getprop(ofw_bus_get_node(dev), SPARC64_OFW_SUBVENDOR, 484 &subvendor, sizeof(subvendor)) == sizeof(subvendor) && 485 subvendor == SUN_VENDORID) 486 return (0); 487 memset(buf, 0, sizeof(buf)); 488 if (OF_package_to_path(ofw_bus_get_node(dev), buf, sizeof(buf)) > 0) { 489 if (strcmp(sparc64_model, SPARC64_BLADE_1500_MODEL) == 0 && 490 strcmp(buf, SPARC64_BLADE_1500_PATH_BGE) == 0) 491 return (0); 492 if (strcmp(sparc64_model, SPARC64_BLADE_2500_MODEL) == 0 && 493 strcmp(buf, SPARC64_BLADE_2500_PATH_BGE) == 0) 494 return (0); 495 } 496 #endif 497 return (1); 498 } 499 500 static uint32_t 501 bge_readmem_ind(struct bge_softc *sc, int off) 502 { 503 device_t dev; 504 uint32_t val; 505 506 dev = sc->bge_dev; 507 508 pci_write_config(dev, BGE_PCI_MEMWIN_BASEADDR, off, 4); 509 val = pci_read_config(dev, BGE_PCI_MEMWIN_DATA, 4); 510 pci_write_config(dev, BGE_PCI_MEMWIN_BASEADDR, 0, 4); 511 return (val); 512 } 513 514 static void 515 bge_writemem_ind(struct bge_softc *sc, int off, int val) 516 { 517 device_t dev; 518 519 dev = sc->bge_dev; 520 521 pci_write_config(dev, BGE_PCI_MEMWIN_BASEADDR, off, 4); 522 pci_write_config(dev, BGE_PCI_MEMWIN_DATA, val, 4); 523 pci_write_config(dev, BGE_PCI_MEMWIN_BASEADDR, 0, 4); 524 } 525 526 #ifdef notdef 527 static uint32_t 528 bge_readreg_ind(struct bge_softc *sc, int off) 529 { 530 device_t dev; 531 532 dev = sc->bge_dev; 533 534 pci_write_config(dev, BGE_PCI_REG_BASEADDR, off, 4); 535 return (pci_read_config(dev, BGE_PCI_REG_DATA, 4)); 536 } 537 #endif 538 539 static void 540 bge_writereg_ind(struct bge_softc *sc, int off, int val) 541 { 542 device_t dev; 543 544 dev = sc->bge_dev; 545 546 pci_write_config(dev, BGE_PCI_REG_BASEADDR, off, 4); 547 pci_write_config(dev, BGE_PCI_REG_DATA, val, 4); 548 } 549 550 static void 551 bge_writemem_direct(struct bge_softc *sc, int off, int val) 552 { 553 CSR_WRITE_4(sc, off, val); 554 } 555 556 static void 557 bge_writembx(struct bge_softc *sc, int off, int val) 558 { 559 if (sc->bge_asicrev == BGE_ASICREV_BCM5906) 560 off += BGE_LPMBX_IRQ0_HI - BGE_MBX_IRQ0_HI; 561 562 CSR_WRITE_4(sc, off, val); 563 } 564 565 /* 566 * Map a single buffer address. 567 */ 568 569 static void 570 bge_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error) 571 { 572 struct bge_dmamap_arg *ctx; 573 574 if (error) 575 return; 576 577 ctx = arg; 578 579 if (nseg > ctx->bge_maxsegs) { 580 ctx->bge_maxsegs = 0; 581 return; 582 } 583 584 ctx->bge_busaddr = segs->ds_addr; 585 } 586 587 static uint8_t 588 bge_nvram_getbyte(struct bge_softc *sc, int addr, uint8_t *dest) 589 { 590 uint32_t access, byte = 0; 591 int i; 592 593 /* Lock. */ 594 CSR_WRITE_4(sc, BGE_NVRAM_SWARB, BGE_NVRAMSWARB_SET1); 595 for (i = 0; i < 8000; i++) { 596 if (CSR_READ_4(sc, BGE_NVRAM_SWARB) & BGE_NVRAMSWARB_GNT1) 597 break; 598 DELAY(20); 599 } 600 if (i == 8000) 601 return (1); 602 603 /* Enable access. */ 604 access = CSR_READ_4(sc, BGE_NVRAM_ACCESS); 605 CSR_WRITE_4(sc, BGE_NVRAM_ACCESS, access | BGE_NVRAMACC_ENABLE); 606 607 CSR_WRITE_4(sc, BGE_NVRAM_ADDR, addr & 0xfffffffc); 608 CSR_WRITE_4(sc, BGE_NVRAM_CMD, BGE_NVRAM_READCMD); 609 for (i = 0; i < BGE_TIMEOUT * 10; i++) { 610 DELAY(10); 611 if (CSR_READ_4(sc, BGE_NVRAM_CMD) & BGE_NVRAMCMD_DONE) { 612 DELAY(10); 613 break; 614 } 615 } 616 617 if (i == BGE_TIMEOUT * 10) { 618 if_printf(sc->bge_ifp, "nvram read timed out\n"); 619 return (1); 620 } 621 622 /* Get result. */ 623 byte = CSR_READ_4(sc, BGE_NVRAM_RDDATA); 624 625 *dest = (bswap32(byte) >> ((addr % 4) * 8)) & 0xFF; 626 627 /* Disable access. */ 628 CSR_WRITE_4(sc, BGE_NVRAM_ACCESS, access); 629 630 /* Unlock. */ 631 CSR_WRITE_4(sc, BGE_NVRAM_SWARB, BGE_NVRAMSWARB_CLR1); 632 CSR_READ_4(sc, BGE_NVRAM_SWARB); 633 634 return (0); 635 } 636 637 /* 638 * Read a sequence of bytes from NVRAM. 639 */ 640 static int 641 bge_read_nvram(struct bge_softc *sc, caddr_t dest, int off, int cnt) 642 { 643 int err = 0, i; 644 uint8_t byte = 0; 645 646 if (sc->bge_asicrev != BGE_ASICREV_BCM5906) 647 return (1); 648 649 for (i = 0; i < cnt; i++) { 650 err = bge_nvram_getbyte(sc, off + i, &byte); 651 if (err) 652 break; 653 *(dest + i) = byte; 654 } 655 656 return (err ? 1 : 0); 657 } 658 659 /* 660 * Read a byte of data stored in the EEPROM at address 'addr.' The 661 * BCM570x supports both the traditional bitbang interface and an 662 * auto access interface for reading the EEPROM. We use the auto 663 * access method. 664 */ 665 static uint8_t 666 bge_eeprom_getbyte(struct bge_softc *sc, int addr, uint8_t *dest) 667 { 668 int i; 669 uint32_t byte = 0; 670 671 /* 672 * Enable use of auto EEPROM access so we can avoid 673 * having to use the bitbang method. 674 */ 675 BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_AUTO_EEPROM); 676 677 /* Reset the EEPROM, load the clock period. */ 678 CSR_WRITE_4(sc, BGE_EE_ADDR, 679 BGE_EEADDR_RESET | BGE_EEHALFCLK(BGE_HALFCLK_384SCL)); 680 DELAY(20); 681 682 /* Issue the read EEPROM command. */ 683 CSR_WRITE_4(sc, BGE_EE_ADDR, BGE_EE_READCMD | addr); 684 685 /* Wait for completion */ 686 for(i = 0; i < BGE_TIMEOUT * 10; i++) { 687 DELAY(10); 688 if (CSR_READ_4(sc, BGE_EE_ADDR) & BGE_EEADDR_DONE) 689 break; 690 } 691 692 if (i == BGE_TIMEOUT * 10) { 693 device_printf(sc->bge_dev, "EEPROM read timed out\n"); 694 return (1); 695 } 696 697 /* Get result. */ 698 byte = CSR_READ_4(sc, BGE_EE_DATA); 699 700 *dest = (byte >> ((addr % 4) * 8)) & 0xFF; 701 702 return (0); 703 } 704 705 /* 706 * Read a sequence of bytes from the EEPROM. 707 */ 708 static int 709 bge_read_eeprom(struct bge_softc *sc, caddr_t dest, int off, int cnt) 710 { 711 int i, error = 0; 712 uint8_t byte = 0; 713 714 for (i = 0; i < cnt; i++) { 715 error = bge_eeprom_getbyte(sc, off + i, &byte); 716 if (error) 717 break; 718 *(dest + i) = byte; 719 } 720 721 return (error ? 1 : 0); 722 } 723 724 static int 725 bge_miibus_readreg(device_t dev, int phy, int reg) 726 { 727 struct bge_softc *sc; 728 uint32_t val, autopoll; 729 int i; 730 731 sc = device_get_softc(dev); 732 733 /* 734 * Broadcom's own driver always assumes the internal 735 * PHY is at GMII address 1. On some chips, the PHY responds 736 * to accesses at all addresses, which could cause us to 737 * bogusly attach the PHY 32 times at probe type. Always 738 * restricting the lookup to address 1 is simpler than 739 * trying to figure out which chips revisions should be 740 * special-cased. 741 */ 742 if (phy != 1) 743 return (0); 744 745 /* Reading with autopolling on may trigger PCI errors */ 746 autopoll = CSR_READ_4(sc, BGE_MI_MODE); 747 if (autopoll & BGE_MIMODE_AUTOPOLL) { 748 BGE_CLRBIT(sc, BGE_MI_MODE, BGE_MIMODE_AUTOPOLL); 749 DELAY(40); 750 } 751 752 CSR_WRITE_4(sc, BGE_MI_COMM, BGE_MICMD_READ | BGE_MICOMM_BUSY | 753 BGE_MIPHY(phy) | BGE_MIREG(reg)); 754 755 for (i = 0; i < BGE_TIMEOUT; i++) { 756 DELAY(10); 757 val = CSR_READ_4(sc, BGE_MI_COMM); 758 if (!(val & BGE_MICOMM_BUSY)) 759 break; 760 } 761 762 if (i == BGE_TIMEOUT) { 763 device_printf(sc->bge_dev, 764 "PHY read timed out (phy %d, reg %d, val 0x%08x)\n", 765 phy, reg, val); 766 val = 0; 767 goto done; 768 } 769 770 DELAY(5); 771 val = CSR_READ_4(sc, BGE_MI_COMM); 772 773 done: 774 if (autopoll & BGE_MIMODE_AUTOPOLL) { 775 BGE_SETBIT(sc, BGE_MI_MODE, BGE_MIMODE_AUTOPOLL); 776 DELAY(40); 777 } 778 779 if (val & BGE_MICOMM_READFAIL) 780 return (0); 781 782 return (val & 0xFFFF); 783 } 784 785 static int 786 bge_miibus_writereg(device_t dev, int phy, int reg, int val) 787 { 788 struct bge_softc *sc; 789 uint32_t autopoll; 790 int i; 791 792 sc = device_get_softc(dev); 793 794 if (sc->bge_asicrev == BGE_ASICREV_BCM5906 && 795 (reg == BRGPHY_MII_1000CTL || reg == BRGPHY_MII_AUXCTL)) 796 return(0); 797 798 /* Reading with autopolling on may trigger PCI errors */ 799 autopoll = CSR_READ_4(sc, BGE_MI_MODE); 800 if (autopoll & BGE_MIMODE_AUTOPOLL) { 801 BGE_CLRBIT(sc, BGE_MI_MODE, BGE_MIMODE_AUTOPOLL); 802 DELAY(40); 803 } 804 805 CSR_WRITE_4(sc, BGE_MI_COMM, BGE_MICMD_WRITE | BGE_MICOMM_BUSY | 806 BGE_MIPHY(phy) | BGE_MIREG(reg) | val); 807 808 for (i = 0; i < BGE_TIMEOUT; i++) { 809 DELAY(10); 810 if (!(CSR_READ_4(sc, BGE_MI_COMM) & BGE_MICOMM_BUSY)) { 811 DELAY(5); 812 CSR_READ_4(sc, BGE_MI_COMM); /* dummy read */ 813 break; 814 } 815 } 816 817 if (i == BGE_TIMEOUT) { 818 device_printf(sc->bge_dev, 819 "PHY write timed out (phy %d, reg %d, val %d)\n", 820 phy, reg, val); 821 return (0); 822 } 823 824 if (autopoll & BGE_MIMODE_AUTOPOLL) { 825 BGE_SETBIT(sc, BGE_MI_MODE, BGE_MIMODE_AUTOPOLL); 826 DELAY(40); 827 } 828 829 return (0); 830 } 831 832 static void 833 bge_miibus_statchg(device_t dev) 834 { 835 struct bge_softc *sc; 836 struct mii_data *mii; 837 sc = device_get_softc(dev); 838 mii = device_get_softc(sc->bge_miibus); 839 840 BGE_CLRBIT(sc, BGE_MAC_MODE, BGE_MACMODE_PORTMODE); 841 if (IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_T) 842 BGE_SETBIT(sc, BGE_MAC_MODE, BGE_PORTMODE_GMII); 843 else 844 BGE_SETBIT(sc, BGE_MAC_MODE, BGE_PORTMODE_MII); 845 846 if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX) 847 BGE_CLRBIT(sc, BGE_MAC_MODE, BGE_MACMODE_HALF_DUPLEX); 848 else 849 BGE_SETBIT(sc, BGE_MAC_MODE, BGE_MACMODE_HALF_DUPLEX); 850 } 851 852 /* 853 * Intialize a standard receive ring descriptor. 854 */ 855 static int 856 bge_newbuf_std(struct bge_softc *sc, int i, struct mbuf *m) 857 { 858 struct mbuf *m_new = NULL; 859 struct bge_rx_bd *r; 860 struct bge_dmamap_arg ctx; 861 int error; 862 863 if (m == NULL) { 864 m_new = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR); 865 if (m_new == NULL) 866 return (ENOBUFS); 867 m_new->m_len = m_new->m_pkthdr.len = MCLBYTES; 868 } else { 869 m_new = m; 870 m_new->m_len = m_new->m_pkthdr.len = MCLBYTES; 871 m_new->m_data = m_new->m_ext.ext_buf; 872 } 873 874 if ((sc->bge_flags & BGE_FLAG_RX_ALIGNBUG) == 0) 875 m_adj(m_new, ETHER_ALIGN); 876 sc->bge_cdata.bge_rx_std_chain[i] = m_new; 877 r = &sc->bge_ldata.bge_rx_std_ring[i]; 878 ctx.bge_maxsegs = 1; 879 ctx.sc = sc; 880 error = bus_dmamap_load(sc->bge_cdata.bge_mtag, 881 sc->bge_cdata.bge_rx_std_dmamap[i], mtod(m_new, void *), 882 m_new->m_len, bge_dma_map_addr, &ctx, BUS_DMA_NOWAIT); 883 if (error || ctx.bge_maxsegs == 0) { 884 if (m == NULL) { 885 sc->bge_cdata.bge_rx_std_chain[i] = NULL; 886 m_freem(m_new); 887 } 888 return (ENOMEM); 889 } 890 r->bge_addr.bge_addr_lo = BGE_ADDR_LO(ctx.bge_busaddr); 891 r->bge_addr.bge_addr_hi = BGE_ADDR_HI(ctx.bge_busaddr); 892 r->bge_flags = BGE_RXBDFLAG_END; 893 r->bge_len = m_new->m_len; 894 r->bge_idx = i; 895 896 bus_dmamap_sync(sc->bge_cdata.bge_mtag, 897 sc->bge_cdata.bge_rx_std_dmamap[i], 898 BUS_DMASYNC_PREREAD); 899 900 return (0); 901 } 902 903 /* 904 * Initialize a jumbo receive ring descriptor. This allocates 905 * a jumbo buffer from the pool managed internally by the driver. 906 */ 907 static int 908 bge_newbuf_jumbo(struct bge_softc *sc, int i, struct mbuf *m) 909 { 910 bus_dma_segment_t segs[BGE_NSEG_JUMBO]; 911 struct bge_extrx_bd *r; 912 struct mbuf *m_new = NULL; 913 int nsegs; 914 int error; 915 916 if (m == NULL) { 917 MGETHDR(m_new, M_DONTWAIT, MT_DATA); 918 if (m_new == NULL) 919 return (ENOBUFS); 920 921 m_cljget(m_new, M_DONTWAIT, MJUM9BYTES); 922 if (!(m_new->m_flags & M_EXT)) { 923 m_freem(m_new); 924 return (ENOBUFS); 925 } 926 m_new->m_len = m_new->m_pkthdr.len = MJUM9BYTES; 927 } else { 928 m_new = m; 929 m_new->m_len = m_new->m_pkthdr.len = MJUM9BYTES; 930 m_new->m_data = m_new->m_ext.ext_buf; 931 } 932 933 if ((sc->bge_flags & BGE_FLAG_RX_ALIGNBUG) == 0) 934 m_adj(m_new, ETHER_ALIGN); 935 936 error = bus_dmamap_load_mbuf_sg(sc->bge_cdata.bge_mtag_jumbo, 937 sc->bge_cdata.bge_rx_jumbo_dmamap[i], 938 m_new, segs, &nsegs, BUS_DMA_NOWAIT); 939 if (error) { 940 if (m == NULL) 941 m_freem(m_new); 942 return (error); 943 } 944 sc->bge_cdata.bge_rx_jumbo_chain[i] = m_new; 945 946 /* 947 * Fill in the extended RX buffer descriptor. 948 */ 949 r = &sc->bge_ldata.bge_rx_jumbo_ring[i]; 950 r->bge_flags = BGE_RXBDFLAG_JUMBO_RING | BGE_RXBDFLAG_END; 951 r->bge_idx = i; 952 r->bge_len3 = r->bge_len2 = r->bge_len1 = 0; 953 switch (nsegs) { 954 case 4: 955 r->bge_addr3.bge_addr_lo = BGE_ADDR_LO(segs[3].ds_addr); 956 r->bge_addr3.bge_addr_hi = BGE_ADDR_HI(segs[3].ds_addr); 957 r->bge_len3 = segs[3].ds_len; 958 case 3: 959 r->bge_addr2.bge_addr_lo = BGE_ADDR_LO(segs[2].ds_addr); 960 r->bge_addr2.bge_addr_hi = BGE_ADDR_HI(segs[2].ds_addr); 961 r->bge_len2 = segs[2].ds_len; 962 case 2: 963 r->bge_addr1.bge_addr_lo = BGE_ADDR_LO(segs[1].ds_addr); 964 r->bge_addr1.bge_addr_hi = BGE_ADDR_HI(segs[1].ds_addr); 965 r->bge_len1 = segs[1].ds_len; 966 case 1: 967 r->bge_addr0.bge_addr_lo = BGE_ADDR_LO(segs[0].ds_addr); 968 r->bge_addr0.bge_addr_hi = BGE_ADDR_HI(segs[0].ds_addr); 969 r->bge_len0 = segs[0].ds_len; 970 break; 971 default: 972 panic("%s: %d segments\n", __func__, nsegs); 973 } 974 975 bus_dmamap_sync(sc->bge_cdata.bge_mtag, 976 sc->bge_cdata.bge_rx_jumbo_dmamap[i], 977 BUS_DMASYNC_PREREAD); 978 979 return (0); 980 } 981 982 /* 983 * The standard receive ring has 512 entries in it. At 2K per mbuf cluster, 984 * that's 1MB or memory, which is a lot. For now, we fill only the first 985 * 256 ring entries and hope that our CPU is fast enough to keep up with 986 * the NIC. 987 */ 988 static int 989 bge_init_rx_ring_std(struct bge_softc *sc) 990 { 991 int i; 992 993 for (i = 0; i < BGE_SSLOTS; i++) { 994 if (bge_newbuf_std(sc, i, NULL) == ENOBUFS) 995 return (ENOBUFS); 996 }; 997 998 bus_dmamap_sync(sc->bge_cdata.bge_rx_std_ring_tag, 999 sc->bge_cdata.bge_rx_std_ring_map, 1000 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 1001 1002 sc->bge_std = i - 1; 1003 bge_writembx(sc, BGE_MBX_RX_STD_PROD_LO, sc->bge_std); 1004 1005 return (0); 1006 } 1007 1008 static void 1009 bge_free_rx_ring_std(struct bge_softc *sc) 1010 { 1011 int i; 1012 1013 for (i = 0; i < BGE_STD_RX_RING_CNT; i++) { 1014 if (sc->bge_cdata.bge_rx_std_chain[i] != NULL) { 1015 bus_dmamap_sync(sc->bge_cdata.bge_mtag, 1016 sc->bge_cdata.bge_rx_std_dmamap[i], 1017 BUS_DMASYNC_POSTREAD); 1018 bus_dmamap_unload(sc->bge_cdata.bge_mtag, 1019 sc->bge_cdata.bge_rx_std_dmamap[i]); 1020 m_freem(sc->bge_cdata.bge_rx_std_chain[i]); 1021 sc->bge_cdata.bge_rx_std_chain[i] = NULL; 1022 } 1023 bzero((char *)&sc->bge_ldata.bge_rx_std_ring[i], 1024 sizeof(struct bge_rx_bd)); 1025 } 1026 } 1027 1028 static int 1029 bge_init_rx_ring_jumbo(struct bge_softc *sc) 1030 { 1031 struct bge_rcb *rcb; 1032 int i; 1033 1034 for (i = 0; i < BGE_JUMBO_RX_RING_CNT; i++) { 1035 if (bge_newbuf_jumbo(sc, i, NULL) == ENOBUFS) 1036 return (ENOBUFS); 1037 }; 1038 1039 bus_dmamap_sync(sc->bge_cdata.bge_rx_jumbo_ring_tag, 1040 sc->bge_cdata.bge_rx_jumbo_ring_map, 1041 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 1042 1043 sc->bge_jumbo = i - 1; 1044 1045 rcb = &sc->bge_ldata.bge_info.bge_jumbo_rx_rcb; 1046 rcb->bge_maxlen_flags = BGE_RCB_MAXLEN_FLAGS(0, 1047 BGE_RCB_FLAG_USE_EXT_RX_BD); 1048 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_MAXLEN_FLAGS, rcb->bge_maxlen_flags); 1049 1050 bge_writembx(sc, BGE_MBX_RX_JUMBO_PROD_LO, sc->bge_jumbo); 1051 1052 return (0); 1053 } 1054 1055 static void 1056 bge_free_rx_ring_jumbo(struct bge_softc *sc) 1057 { 1058 int i; 1059 1060 for (i = 0; i < BGE_JUMBO_RX_RING_CNT; i++) { 1061 if (sc->bge_cdata.bge_rx_jumbo_chain[i] != NULL) { 1062 bus_dmamap_sync(sc->bge_cdata.bge_mtag_jumbo, 1063 sc->bge_cdata.bge_rx_jumbo_dmamap[i], 1064 BUS_DMASYNC_POSTREAD); 1065 bus_dmamap_unload(sc->bge_cdata.bge_mtag_jumbo, 1066 sc->bge_cdata.bge_rx_jumbo_dmamap[i]); 1067 m_freem(sc->bge_cdata.bge_rx_jumbo_chain[i]); 1068 sc->bge_cdata.bge_rx_jumbo_chain[i] = NULL; 1069 } 1070 bzero((char *)&sc->bge_ldata.bge_rx_jumbo_ring[i], 1071 sizeof(struct bge_extrx_bd)); 1072 } 1073 } 1074 1075 static void 1076 bge_free_tx_ring(struct bge_softc *sc) 1077 { 1078 int i; 1079 1080 if (sc->bge_ldata.bge_tx_ring == NULL) 1081 return; 1082 1083 for (i = 0; i < BGE_TX_RING_CNT; i++) { 1084 if (sc->bge_cdata.bge_tx_chain[i] != NULL) { 1085 bus_dmamap_sync(sc->bge_cdata.bge_mtag, 1086 sc->bge_cdata.bge_tx_dmamap[i], 1087 BUS_DMASYNC_POSTWRITE); 1088 bus_dmamap_unload(sc->bge_cdata.bge_mtag, 1089 sc->bge_cdata.bge_tx_dmamap[i]); 1090 m_freem(sc->bge_cdata.bge_tx_chain[i]); 1091 sc->bge_cdata.bge_tx_chain[i] = NULL; 1092 } 1093 bzero((char *)&sc->bge_ldata.bge_tx_ring[i], 1094 sizeof(struct bge_tx_bd)); 1095 } 1096 } 1097 1098 static int 1099 bge_init_tx_ring(struct bge_softc *sc) 1100 { 1101 sc->bge_txcnt = 0; 1102 sc->bge_tx_saved_considx = 0; 1103 1104 /* Initialize transmit producer index for host-memory send ring. */ 1105 sc->bge_tx_prodidx = 0; 1106 bge_writembx(sc, BGE_MBX_TX_HOST_PROD0_LO, sc->bge_tx_prodidx); 1107 1108 /* 5700 b2 errata */ 1109 if (sc->bge_chiprev == BGE_CHIPREV_5700_BX) 1110 bge_writembx(sc, BGE_MBX_TX_HOST_PROD0_LO, sc->bge_tx_prodidx); 1111 1112 /* NIC-memory send ring not used; initialize to zero. */ 1113 bge_writembx(sc, BGE_MBX_TX_NIC_PROD0_LO, 0); 1114 /* 5700 b2 errata */ 1115 if (sc->bge_chiprev == BGE_CHIPREV_5700_BX) 1116 bge_writembx(sc, BGE_MBX_TX_NIC_PROD0_LO, 0); 1117 1118 return (0); 1119 } 1120 1121 static void 1122 bge_setpromisc(struct bge_softc *sc) 1123 { 1124 struct ifnet *ifp; 1125 1126 BGE_LOCK_ASSERT(sc); 1127 1128 ifp = sc->bge_ifp; 1129 1130 /* Enable or disable promiscuous mode as needed. */ 1131 if (ifp->if_flags & IFF_PROMISC) 1132 BGE_SETBIT(sc, BGE_RX_MODE, BGE_RXMODE_RX_PROMISC); 1133 else 1134 BGE_CLRBIT(sc, BGE_RX_MODE, BGE_RXMODE_RX_PROMISC); 1135 } 1136 1137 static void 1138 bge_setmulti(struct bge_softc *sc) 1139 { 1140 struct ifnet *ifp; 1141 struct ifmultiaddr *ifma; 1142 uint32_t hashes[4] = { 0, 0, 0, 0 }; 1143 int h, i; 1144 1145 BGE_LOCK_ASSERT(sc); 1146 1147 ifp = sc->bge_ifp; 1148 1149 if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) { 1150 for (i = 0; i < 4; i++) 1151 CSR_WRITE_4(sc, BGE_MAR0 + (i * 4), 0xFFFFFFFF); 1152 return; 1153 } 1154 1155 /* First, zot all the existing filters. */ 1156 for (i = 0; i < 4; i++) 1157 CSR_WRITE_4(sc, BGE_MAR0 + (i * 4), 0); 1158 1159 /* Now program new ones. */ 1160 IF_ADDR_LOCK(ifp); 1161 TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { 1162 if (ifma->ifma_addr->sa_family != AF_LINK) 1163 continue; 1164 h = ether_crc32_le(LLADDR((struct sockaddr_dl *) 1165 ifma->ifma_addr), ETHER_ADDR_LEN) & 0x7F; 1166 hashes[(h & 0x60) >> 5] |= 1 << (h & 0x1F); 1167 } 1168 IF_ADDR_UNLOCK(ifp); 1169 1170 for (i = 0; i < 4; i++) 1171 CSR_WRITE_4(sc, BGE_MAR0 + (i * 4), hashes[i]); 1172 } 1173 1174 static void 1175 bge_setvlan(struct bge_softc *sc) 1176 { 1177 struct ifnet *ifp; 1178 1179 BGE_LOCK_ASSERT(sc); 1180 1181 ifp = sc->bge_ifp; 1182 1183 /* Enable or disable VLAN tag stripping as needed. */ 1184 if (ifp->if_capenable & IFCAP_VLAN_HWTAGGING) 1185 BGE_CLRBIT(sc, BGE_RX_MODE, BGE_RXMODE_RX_KEEP_VLAN_DIAG); 1186 else 1187 BGE_SETBIT(sc, BGE_RX_MODE, BGE_RXMODE_RX_KEEP_VLAN_DIAG); 1188 } 1189 1190 static void 1191 bge_sig_pre_reset(sc, type) 1192 struct bge_softc *sc; 1193 int type; 1194 { 1195 /* 1196 * Some chips don't like this so only do this if ASF is enabled 1197 */ 1198 if (sc->bge_asf_mode) 1199 bge_writemem_ind(sc, BGE_SOFTWARE_GENCOMM, BGE_MAGIC_NUMBER); 1200 1201 if (sc->bge_asf_mode & ASF_NEW_HANDSHAKE) { 1202 switch (type) { 1203 case BGE_RESET_START: 1204 bge_writemem_ind(sc, BGE_SDI_STATUS, 0x1); /* START */ 1205 break; 1206 case BGE_RESET_STOP: 1207 bge_writemem_ind(sc, BGE_SDI_STATUS, 0x2); /* UNLOAD */ 1208 break; 1209 } 1210 } 1211 } 1212 1213 static void 1214 bge_sig_post_reset(sc, type) 1215 struct bge_softc *sc; 1216 int type; 1217 { 1218 if (sc->bge_asf_mode & ASF_NEW_HANDSHAKE) { 1219 switch (type) { 1220 case BGE_RESET_START: 1221 bge_writemem_ind(sc, BGE_SDI_STATUS, 0x80000001); 1222 /* START DONE */ 1223 break; 1224 case BGE_RESET_STOP: 1225 bge_writemem_ind(sc, BGE_SDI_STATUS, 0x80000002); 1226 break; 1227 } 1228 } 1229 } 1230 1231 static void 1232 bge_sig_legacy(sc, type) 1233 struct bge_softc *sc; 1234 int type; 1235 { 1236 if (sc->bge_asf_mode) { 1237 switch (type) { 1238 case BGE_RESET_START: 1239 bge_writemem_ind(sc, BGE_SDI_STATUS, 0x1); /* START */ 1240 break; 1241 case BGE_RESET_STOP: 1242 bge_writemem_ind(sc, BGE_SDI_STATUS, 0x2); /* UNLOAD */ 1243 break; 1244 } 1245 } 1246 } 1247 1248 void bge_stop_fw(struct bge_softc *); 1249 void 1250 bge_stop_fw(sc) 1251 struct bge_softc *sc; 1252 { 1253 int i; 1254 1255 if (sc->bge_asf_mode) { 1256 bge_writemem_ind(sc, BGE_SOFTWARE_GENCOMM_FW, BGE_FW_PAUSE); 1257 CSR_WRITE_4(sc, BGE_CPU_EVENT, 1258 CSR_READ_4(sc, BGE_CPU_EVENT) | (1 << 14)); 1259 1260 for (i = 0; i < 100; i++ ) { 1261 if (!(CSR_READ_4(sc, BGE_CPU_EVENT) & (1 << 14))) 1262 break; 1263 DELAY(10); 1264 } 1265 } 1266 } 1267 1268 /* 1269 * Do endian, PCI and DMA initialization. Also check the on-board ROM 1270 * self-test results. 1271 */ 1272 static int 1273 bge_chipinit(struct bge_softc *sc) 1274 { 1275 uint32_t dma_rw_ctl; 1276 int i; 1277 1278 /* Set endianness before we access any non-PCI registers. */ 1279 pci_write_config(sc->bge_dev, BGE_PCI_MISC_CTL, BGE_INIT, 4); 1280 1281 /* 1282 * Check the 'ROM failed' bit on the RX CPU to see if 1283 * self-tests passed. Skip this check when there's no 1284 * chip containing the Ethernet address fitted, since 1285 * in that case it will always fail. 1286 */ 1287 if ((sc->bge_flags & BGE_FLAG_EADDR) && 1288 CSR_READ_4(sc, BGE_RXCPU_MODE) & BGE_RXCPUMODE_ROMFAIL) { 1289 device_printf(sc->bge_dev, "RX CPU self-diagnostics failed!\n"); 1290 return (ENODEV); 1291 } 1292 1293 /* Clear the MAC control register */ 1294 CSR_WRITE_4(sc, BGE_MAC_MODE, 0); 1295 1296 /* 1297 * Clear the MAC statistics block in the NIC's 1298 * internal memory. 1299 */ 1300 for (i = BGE_STATS_BLOCK; 1301 i < BGE_STATS_BLOCK_END + 1; i += sizeof(uint32_t)) 1302 BGE_MEMWIN_WRITE(sc, i, 0); 1303 1304 for (i = BGE_STATUS_BLOCK; 1305 i < BGE_STATUS_BLOCK_END + 1; i += sizeof(uint32_t)) 1306 BGE_MEMWIN_WRITE(sc, i, 0); 1307 1308 /* 1309 * Set up the PCI DMA control register. 1310 */ 1311 dma_rw_ctl = BGE_PCIDMARWCTL_RD_CMD_SHIFT(6) | 1312 BGE_PCIDMARWCTL_WR_CMD_SHIFT(7); 1313 if (sc->bge_flags & BGE_FLAG_PCIE) { 1314 /* Read watermark not used, 128 bytes for write. */ 1315 dma_rw_ctl |= BGE_PCIDMARWCTL_WR_WAT_SHIFT(3); 1316 } else if (sc->bge_flags & BGE_FLAG_PCIX) { 1317 if (BGE_IS_5714_FAMILY(sc)) { 1318 /* 256 bytes for read and write. */ 1319 dma_rw_ctl |= BGE_PCIDMARWCTL_RD_WAT_SHIFT(2) | 1320 BGE_PCIDMARWCTL_WR_WAT_SHIFT(2); 1321 dma_rw_ctl |= (sc->bge_asicrev == BGE_ASICREV_BCM5780) ? 1322 BGE_PCIDMARWCTL_ONEDMA_ATONCE_GLOBAL : 1323 BGE_PCIDMARWCTL_ONEDMA_ATONCE_LOCAL; 1324 } else if (sc->bge_asicrev == BGE_ASICREV_BCM5704) { 1325 /* 1536 bytes for read, 384 bytes for write. */ 1326 dma_rw_ctl |= BGE_PCIDMARWCTL_RD_WAT_SHIFT(7) | 1327 BGE_PCIDMARWCTL_WR_WAT_SHIFT(3); 1328 } else { 1329 /* 384 bytes for read and write. */ 1330 dma_rw_ctl |= BGE_PCIDMARWCTL_RD_WAT_SHIFT(3) | 1331 BGE_PCIDMARWCTL_WR_WAT_SHIFT(3) | 1332 0x0F; 1333 } 1334 if (sc->bge_asicrev == BGE_ASICREV_BCM5703 || 1335 sc->bge_asicrev == BGE_ASICREV_BCM5704) { 1336 uint32_t tmp; 1337 1338 /* Set ONE_DMA_AT_ONCE for hardware workaround. */ 1339 tmp = CSR_READ_4(sc, BGE_PCI_CLKCTL) & 0x1F; 1340 if (tmp == 6 || tmp == 7) 1341 dma_rw_ctl |= 1342 BGE_PCIDMARWCTL_ONEDMA_ATONCE_GLOBAL; 1343 1344 /* Set PCI-X DMA write workaround. */ 1345 dma_rw_ctl |= BGE_PCIDMARWCTL_ASRT_ALL_BE; 1346 } 1347 } else { 1348 /* Conventional PCI bus: 256 bytes for read and write. */ 1349 dma_rw_ctl |= BGE_PCIDMARWCTL_RD_WAT_SHIFT(7) | 1350 BGE_PCIDMARWCTL_WR_WAT_SHIFT(7); 1351 1352 if (sc->bge_asicrev != BGE_ASICREV_BCM5705 && 1353 sc->bge_asicrev != BGE_ASICREV_BCM5750) 1354 dma_rw_ctl |= 0x0F; 1355 } 1356 if (sc->bge_asicrev == BGE_ASICREV_BCM5700 || 1357 sc->bge_asicrev == BGE_ASICREV_BCM5701) 1358 dma_rw_ctl |= BGE_PCIDMARWCTL_USE_MRM | 1359 BGE_PCIDMARWCTL_ASRT_ALL_BE; 1360 if (sc->bge_asicrev == BGE_ASICREV_BCM5703 || 1361 sc->bge_asicrev == BGE_ASICREV_BCM5704) 1362 dma_rw_ctl &= ~BGE_PCIDMARWCTL_MINDMA; 1363 pci_write_config(sc->bge_dev, BGE_PCI_DMA_RW_CTL, dma_rw_ctl, 4); 1364 1365 /* 1366 * Set up general mode register. 1367 */ 1368 CSR_WRITE_4(sc, BGE_MODE_CTL, BGE_DMA_SWAP_OPTIONS | 1369 BGE_MODECTL_MAC_ATTN_INTR | BGE_MODECTL_HOST_SEND_BDS | 1370 BGE_MODECTL_TX_NO_PHDR_CSUM); 1371 1372 /* 1373 * Tell the firmware the driver is running 1374 */ 1375 if (sc->bge_asf_mode & ASF_STACKUP) 1376 BGE_SETBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP); 1377 1378 /* 1379 * Disable memory write invalidate. Apparently it is not supported 1380 * properly by these devices. 1381 */ 1382 PCI_CLRBIT(sc->bge_dev, BGE_PCI_CMD, PCIM_CMD_MWIEN, 4); 1383 1384 /* Set the timer prescaler (always 66Mhz) */ 1385 CSR_WRITE_4(sc, BGE_MISC_CFG, BGE_32BITTIME_66MHZ); 1386 1387 /* XXX: The Linux tg3 driver does this at the start of brgphy_reset. */ 1388 if (sc->bge_asicrev == BGE_ASICREV_BCM5906) { 1389 DELAY(40); /* XXX */ 1390 1391 /* Put PHY into ready state */ 1392 BGE_CLRBIT(sc, BGE_MISC_CFG, BGE_MISCCFG_EPHY_IDDQ); 1393 CSR_READ_4(sc, BGE_MISC_CFG); /* Flush */ 1394 DELAY(40); 1395 } 1396 1397 return (0); 1398 } 1399 1400 static int 1401 bge_blockinit(struct bge_softc *sc) 1402 { 1403 struct bge_rcb *rcb; 1404 bus_size_t vrcb; 1405 bge_hostaddr taddr; 1406 uint32_t val; 1407 int i; 1408 1409 /* 1410 * Initialize the memory window pointer register so that 1411 * we can access the first 32K of internal NIC RAM. This will 1412 * allow us to set up the TX send ring RCBs and the RX return 1413 * ring RCBs, plus other things which live in NIC memory. 1414 */ 1415 CSR_WRITE_4(sc, BGE_PCI_MEMWIN_BASEADDR, 0); 1416 1417 /* Note: the BCM5704 has a smaller mbuf space than other chips. */ 1418 1419 if (!(BGE_IS_5705_PLUS(sc))) { 1420 /* Configure mbuf memory pool */ 1421 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_BASEADDR, BGE_BUFFPOOL_1); 1422 if (sc->bge_asicrev == BGE_ASICREV_BCM5704) 1423 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_LEN, 0x10000); 1424 else 1425 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_LEN, 0x18000); 1426 1427 /* Configure DMA resource pool */ 1428 CSR_WRITE_4(sc, BGE_BMAN_DMA_DESCPOOL_BASEADDR, 1429 BGE_DMA_DESCRIPTORS); 1430 CSR_WRITE_4(sc, BGE_BMAN_DMA_DESCPOOL_LEN, 0x2000); 1431 } 1432 1433 /* Configure mbuf pool watermarks */ 1434 if (!BGE_IS_5705_PLUS(sc)) { 1435 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_READDMA_LOWAT, 0x50); 1436 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x20); 1437 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_HIWAT, 0x60); 1438 } else if (sc->bge_asicrev == BGE_ASICREV_BCM5906) { 1439 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_READDMA_LOWAT, 0x0); 1440 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x04); 1441 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_HIWAT, 0x10); 1442 } else { 1443 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_READDMA_LOWAT, 0x0); 1444 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x10); 1445 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_HIWAT, 0x60); 1446 } 1447 1448 /* Configure DMA resource watermarks */ 1449 CSR_WRITE_4(sc, BGE_BMAN_DMA_DESCPOOL_LOWAT, 5); 1450 CSR_WRITE_4(sc, BGE_BMAN_DMA_DESCPOOL_HIWAT, 10); 1451 1452 /* Enable buffer manager */ 1453 if (!(BGE_IS_5705_PLUS(sc))) { 1454 CSR_WRITE_4(sc, BGE_BMAN_MODE, 1455 BGE_BMANMODE_ENABLE | BGE_BMANMODE_LOMBUF_ATTN); 1456 1457 /* Poll for buffer manager start indication */ 1458 for (i = 0; i < BGE_TIMEOUT; i++) { 1459 DELAY(10); 1460 if (CSR_READ_4(sc, BGE_BMAN_MODE) & BGE_BMANMODE_ENABLE) 1461 break; 1462 } 1463 1464 if (i == BGE_TIMEOUT) { 1465 device_printf(sc->bge_dev, 1466 "buffer manager failed to start\n"); 1467 return (ENXIO); 1468 } 1469 } 1470 1471 /* Enable flow-through queues */ 1472 CSR_WRITE_4(sc, BGE_FTQ_RESET, 0xFFFFFFFF); 1473 CSR_WRITE_4(sc, BGE_FTQ_RESET, 0); 1474 1475 /* Wait until queue initialization is complete */ 1476 for (i = 0; i < BGE_TIMEOUT; i++) { 1477 DELAY(10); 1478 if (CSR_READ_4(sc, BGE_FTQ_RESET) == 0) 1479 break; 1480 } 1481 1482 if (i == BGE_TIMEOUT) { 1483 device_printf(sc->bge_dev, "flow-through queue init failed\n"); 1484 return (ENXIO); 1485 } 1486 1487 /* Initialize the standard RX ring control block */ 1488 rcb = &sc->bge_ldata.bge_info.bge_std_rx_rcb; 1489 rcb->bge_hostaddr.bge_addr_lo = 1490 BGE_ADDR_LO(sc->bge_ldata.bge_rx_std_ring_paddr); 1491 rcb->bge_hostaddr.bge_addr_hi = 1492 BGE_ADDR_HI(sc->bge_ldata.bge_rx_std_ring_paddr); 1493 bus_dmamap_sync(sc->bge_cdata.bge_rx_std_ring_tag, 1494 sc->bge_cdata.bge_rx_std_ring_map, BUS_DMASYNC_PREREAD); 1495 if (BGE_IS_5705_PLUS(sc)) 1496 rcb->bge_maxlen_flags = BGE_RCB_MAXLEN_FLAGS(512, 0); 1497 else 1498 rcb->bge_maxlen_flags = 1499 BGE_RCB_MAXLEN_FLAGS(BGE_MAX_FRAMELEN, 0); 1500 rcb->bge_nicaddr = BGE_STD_RX_RINGS; 1501 CSR_WRITE_4(sc, BGE_RX_STD_RCB_HADDR_HI, rcb->bge_hostaddr.bge_addr_hi); 1502 CSR_WRITE_4(sc, BGE_RX_STD_RCB_HADDR_LO, rcb->bge_hostaddr.bge_addr_lo); 1503 1504 CSR_WRITE_4(sc, BGE_RX_STD_RCB_MAXLEN_FLAGS, rcb->bge_maxlen_flags); 1505 CSR_WRITE_4(sc, BGE_RX_STD_RCB_NICADDR, rcb->bge_nicaddr); 1506 1507 /* 1508 * Initialize the jumbo RX ring control block 1509 * We set the 'ring disabled' bit in the flags 1510 * field until we're actually ready to start 1511 * using this ring (i.e. once we set the MTU 1512 * high enough to require it). 1513 */ 1514 if (BGE_IS_JUMBO_CAPABLE(sc)) { 1515 rcb = &sc->bge_ldata.bge_info.bge_jumbo_rx_rcb; 1516 1517 rcb->bge_hostaddr.bge_addr_lo = 1518 BGE_ADDR_LO(sc->bge_ldata.bge_rx_jumbo_ring_paddr); 1519 rcb->bge_hostaddr.bge_addr_hi = 1520 BGE_ADDR_HI(sc->bge_ldata.bge_rx_jumbo_ring_paddr); 1521 bus_dmamap_sync(sc->bge_cdata.bge_rx_jumbo_ring_tag, 1522 sc->bge_cdata.bge_rx_jumbo_ring_map, 1523 BUS_DMASYNC_PREREAD); 1524 rcb->bge_maxlen_flags = BGE_RCB_MAXLEN_FLAGS(0, 1525 BGE_RCB_FLAG_USE_EXT_RX_BD | BGE_RCB_FLAG_RING_DISABLED); 1526 rcb->bge_nicaddr = BGE_JUMBO_RX_RINGS; 1527 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_HADDR_HI, 1528 rcb->bge_hostaddr.bge_addr_hi); 1529 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_HADDR_LO, 1530 rcb->bge_hostaddr.bge_addr_lo); 1531 1532 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_MAXLEN_FLAGS, 1533 rcb->bge_maxlen_flags); 1534 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_NICADDR, rcb->bge_nicaddr); 1535 1536 /* Set up dummy disabled mini ring RCB */ 1537 rcb = &sc->bge_ldata.bge_info.bge_mini_rx_rcb; 1538 rcb->bge_maxlen_flags = 1539 BGE_RCB_MAXLEN_FLAGS(0, BGE_RCB_FLAG_RING_DISABLED); 1540 CSR_WRITE_4(sc, BGE_RX_MINI_RCB_MAXLEN_FLAGS, 1541 rcb->bge_maxlen_flags); 1542 } 1543 1544 /* 1545 * Set the BD ring replentish thresholds. The recommended 1546 * values are 1/8th the number of descriptors allocated to 1547 * each ring. 1548 * XXX The 5754 requires a lower threshold, so it might be a 1549 * requirement of all 575x family chips. The Linux driver sets 1550 * the lower threshold for all 5705 family chips as well, but there 1551 * are reports that it might not need to be so strict. 1552 * 1553 * XXX Linux does some extra fiddling here for the 5906 parts as 1554 * well. 1555 */ 1556 if (BGE_IS_5705_PLUS(sc)) 1557 val = 8; 1558 else 1559 val = BGE_STD_RX_RING_CNT / 8; 1560 CSR_WRITE_4(sc, BGE_RBDI_STD_REPL_THRESH, val); 1561 CSR_WRITE_4(sc, BGE_RBDI_JUMBO_REPL_THRESH, BGE_JUMBO_RX_RING_CNT/8); 1562 1563 /* 1564 * Disable all unused send rings by setting the 'ring disabled' 1565 * bit in the flags field of all the TX send ring control blocks. 1566 * These are located in NIC memory. 1567 */ 1568 vrcb = BGE_MEMWIN_START + BGE_SEND_RING_RCB; 1569 for (i = 0; i < BGE_TX_RINGS_EXTSSRAM_MAX; i++) { 1570 RCB_WRITE_4(sc, vrcb, bge_maxlen_flags, 1571 BGE_RCB_MAXLEN_FLAGS(0, BGE_RCB_FLAG_RING_DISABLED)); 1572 RCB_WRITE_4(sc, vrcb, bge_nicaddr, 0); 1573 vrcb += sizeof(struct bge_rcb); 1574 } 1575 1576 /* Configure TX RCB 0 (we use only the first ring) */ 1577 vrcb = BGE_MEMWIN_START + BGE_SEND_RING_RCB; 1578 BGE_HOSTADDR(taddr, sc->bge_ldata.bge_tx_ring_paddr); 1579 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_hi, taddr.bge_addr_hi); 1580 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_lo, taddr.bge_addr_lo); 1581 RCB_WRITE_4(sc, vrcb, bge_nicaddr, 1582 BGE_NIC_TXRING_ADDR(0, BGE_TX_RING_CNT)); 1583 if (!(BGE_IS_5705_PLUS(sc))) 1584 RCB_WRITE_4(sc, vrcb, bge_maxlen_flags, 1585 BGE_RCB_MAXLEN_FLAGS(BGE_TX_RING_CNT, 0)); 1586 1587 /* Disable all unused RX return rings */ 1588 vrcb = BGE_MEMWIN_START + BGE_RX_RETURN_RING_RCB; 1589 for (i = 0; i < BGE_RX_RINGS_MAX; i++) { 1590 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_hi, 0); 1591 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_lo, 0); 1592 RCB_WRITE_4(sc, vrcb, bge_maxlen_flags, 1593 BGE_RCB_MAXLEN_FLAGS(sc->bge_return_ring_cnt, 1594 BGE_RCB_FLAG_RING_DISABLED)); 1595 RCB_WRITE_4(sc, vrcb, bge_nicaddr, 0); 1596 bge_writembx(sc, BGE_MBX_RX_CONS0_LO + 1597 (i * (sizeof(uint64_t))), 0); 1598 vrcb += sizeof(struct bge_rcb); 1599 } 1600 1601 /* Initialize RX ring indexes */ 1602 bge_writembx(sc, BGE_MBX_RX_STD_PROD_LO, 0); 1603 bge_writembx(sc, BGE_MBX_RX_JUMBO_PROD_LO, 0); 1604 bge_writembx(sc, BGE_MBX_RX_MINI_PROD_LO, 0); 1605 1606 /* 1607 * Set up RX return ring 0 1608 * Note that the NIC address for RX return rings is 0x00000000. 1609 * The return rings live entirely within the host, so the 1610 * nicaddr field in the RCB isn't used. 1611 */ 1612 vrcb = BGE_MEMWIN_START + BGE_RX_RETURN_RING_RCB; 1613 BGE_HOSTADDR(taddr, sc->bge_ldata.bge_rx_return_ring_paddr); 1614 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_hi, taddr.bge_addr_hi); 1615 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_lo, taddr.bge_addr_lo); 1616 RCB_WRITE_4(sc, vrcb, bge_nicaddr, 0x00000000); 1617 RCB_WRITE_4(sc, vrcb, bge_maxlen_flags, 1618 BGE_RCB_MAXLEN_FLAGS(sc->bge_return_ring_cnt, 0)); 1619 1620 /* Set random backoff seed for TX */ 1621 CSR_WRITE_4(sc, BGE_TX_RANDOM_BACKOFF, 1622 IF_LLADDR(sc->bge_ifp)[0] + IF_LLADDR(sc->bge_ifp)[1] + 1623 IF_LLADDR(sc->bge_ifp)[2] + IF_LLADDR(sc->bge_ifp)[3] + 1624 IF_LLADDR(sc->bge_ifp)[4] + IF_LLADDR(sc->bge_ifp)[5] + 1625 BGE_TX_BACKOFF_SEED_MASK); 1626 1627 /* Set inter-packet gap */ 1628 CSR_WRITE_4(sc, BGE_TX_LENGTHS, 0x2620); 1629 1630 /* 1631 * Specify which ring to use for packets that don't match 1632 * any RX rules. 1633 */ 1634 CSR_WRITE_4(sc, BGE_RX_RULES_CFG, 0x08); 1635 1636 /* 1637 * Configure number of RX lists. One interrupt distribution 1638 * list, sixteen active lists, one bad frames class. 1639 */ 1640 CSR_WRITE_4(sc, BGE_RXLP_CFG, 0x181); 1641 1642 /* Inialize RX list placement stats mask. */ 1643 CSR_WRITE_4(sc, BGE_RXLP_STATS_ENABLE_MASK, 0x007FFFFF); 1644 CSR_WRITE_4(sc, BGE_RXLP_STATS_CTL, 0x1); 1645 1646 /* Disable host coalescing until we get it set up */ 1647 CSR_WRITE_4(sc, BGE_HCC_MODE, 0x00000000); 1648 1649 /* Poll to make sure it's shut down. */ 1650 for (i = 0; i < BGE_TIMEOUT; i++) { 1651 DELAY(10); 1652 if (!(CSR_READ_4(sc, BGE_HCC_MODE) & BGE_HCCMODE_ENABLE)) 1653 break; 1654 } 1655 1656 if (i == BGE_TIMEOUT) { 1657 device_printf(sc->bge_dev, 1658 "host coalescing engine failed to idle\n"); 1659 return (ENXIO); 1660 } 1661 1662 /* Set up host coalescing defaults */ 1663 CSR_WRITE_4(sc, BGE_HCC_RX_COAL_TICKS, sc->bge_rx_coal_ticks); 1664 CSR_WRITE_4(sc, BGE_HCC_TX_COAL_TICKS, sc->bge_tx_coal_ticks); 1665 CSR_WRITE_4(sc, BGE_HCC_RX_MAX_COAL_BDS, sc->bge_rx_max_coal_bds); 1666 CSR_WRITE_4(sc, BGE_HCC_TX_MAX_COAL_BDS, sc->bge_tx_max_coal_bds); 1667 if (!(BGE_IS_5705_PLUS(sc))) { 1668 CSR_WRITE_4(sc, BGE_HCC_RX_COAL_TICKS_INT, 0); 1669 CSR_WRITE_4(sc, BGE_HCC_TX_COAL_TICKS_INT, 0); 1670 } 1671 CSR_WRITE_4(sc, BGE_HCC_RX_MAX_COAL_BDS_INT, 1); 1672 CSR_WRITE_4(sc, BGE_HCC_TX_MAX_COAL_BDS_INT, 1); 1673 1674 /* Set up address of statistics block */ 1675 if (!(BGE_IS_5705_PLUS(sc))) { 1676 CSR_WRITE_4(sc, BGE_HCC_STATS_ADDR_HI, 1677 BGE_ADDR_HI(sc->bge_ldata.bge_stats_paddr)); 1678 CSR_WRITE_4(sc, BGE_HCC_STATS_ADDR_LO, 1679 BGE_ADDR_LO(sc->bge_ldata.bge_stats_paddr)); 1680 CSR_WRITE_4(sc, BGE_HCC_STATS_BASEADDR, BGE_STATS_BLOCK); 1681 CSR_WRITE_4(sc, BGE_HCC_STATUSBLK_BASEADDR, BGE_STATUS_BLOCK); 1682 CSR_WRITE_4(sc, BGE_HCC_STATS_TICKS, sc->bge_stat_ticks); 1683 } 1684 1685 /* Set up address of status block */ 1686 CSR_WRITE_4(sc, BGE_HCC_STATUSBLK_ADDR_HI, 1687 BGE_ADDR_HI(sc->bge_ldata.bge_status_block_paddr)); 1688 CSR_WRITE_4(sc, BGE_HCC_STATUSBLK_ADDR_LO, 1689 BGE_ADDR_LO(sc->bge_ldata.bge_status_block_paddr)); 1690 sc->bge_ldata.bge_status_block->bge_idx[0].bge_rx_prod_idx = 0; 1691 sc->bge_ldata.bge_status_block->bge_idx[0].bge_tx_cons_idx = 0; 1692 1693 /* Turn on host coalescing state machine */ 1694 CSR_WRITE_4(sc, BGE_HCC_MODE, BGE_HCCMODE_ENABLE); 1695 1696 /* Turn on RX BD completion state machine and enable attentions */ 1697 CSR_WRITE_4(sc, BGE_RBDC_MODE, 1698 BGE_RBDCMODE_ENABLE | BGE_RBDCMODE_ATTN); 1699 1700 /* Turn on RX list placement state machine */ 1701 CSR_WRITE_4(sc, BGE_RXLP_MODE, BGE_RXLPMODE_ENABLE); 1702 1703 /* Turn on RX list selector state machine. */ 1704 if (!(BGE_IS_5705_PLUS(sc))) 1705 CSR_WRITE_4(sc, BGE_RXLS_MODE, BGE_RXLSMODE_ENABLE); 1706 1707 /* Turn on DMA, clear stats */ 1708 CSR_WRITE_4(sc, BGE_MAC_MODE, BGE_MACMODE_TXDMA_ENB | 1709 BGE_MACMODE_RXDMA_ENB | BGE_MACMODE_RX_STATS_CLEAR | 1710 BGE_MACMODE_TX_STATS_CLEAR | BGE_MACMODE_RX_STATS_ENB | 1711 BGE_MACMODE_TX_STATS_ENB | BGE_MACMODE_FRMHDR_DMA_ENB | 1712 ((sc->bge_flags & BGE_FLAG_TBI) ? 1713 BGE_PORTMODE_TBI : BGE_PORTMODE_MII)); 1714 1715 /* Set misc. local control, enable interrupts on attentions */ 1716 CSR_WRITE_4(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_INTR_ONATTN); 1717 1718 #ifdef notdef 1719 /* Assert GPIO pins for PHY reset */ 1720 BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_MISCIO_OUT0 | 1721 BGE_MLC_MISCIO_OUT1 | BGE_MLC_MISCIO_OUT2); 1722 BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_MISCIO_OUTEN0 | 1723 BGE_MLC_MISCIO_OUTEN1 | BGE_MLC_MISCIO_OUTEN2); 1724 #endif 1725 1726 /* Turn on DMA completion state machine */ 1727 if (!(BGE_IS_5705_PLUS(sc))) 1728 CSR_WRITE_4(sc, BGE_DMAC_MODE, BGE_DMACMODE_ENABLE); 1729 1730 val = BGE_WDMAMODE_ENABLE | BGE_WDMAMODE_ALL_ATTNS; 1731 1732 /* Enable host coalescing bug fix. */ 1733 if (sc->bge_asicrev == BGE_ASICREV_BCM5755 || 1734 sc->bge_asicrev == BGE_ASICREV_BCM5787) 1735 val |= 1 << 29; 1736 1737 /* Turn on write DMA state machine */ 1738 CSR_WRITE_4(sc, BGE_WDMA_MODE, val); 1739 1740 /* Turn on read DMA state machine */ 1741 CSR_WRITE_4(sc, BGE_RDMA_MODE, 1742 BGE_RDMAMODE_ENABLE | BGE_RDMAMODE_ALL_ATTNS); 1743 1744 /* Turn on RX data completion state machine */ 1745 CSR_WRITE_4(sc, BGE_RDC_MODE, BGE_RDCMODE_ENABLE); 1746 1747 /* Turn on RX BD initiator state machine */ 1748 CSR_WRITE_4(sc, BGE_RBDI_MODE, BGE_RBDIMODE_ENABLE); 1749 1750 /* Turn on RX data and RX BD initiator state machine */ 1751 CSR_WRITE_4(sc, BGE_RDBDI_MODE, BGE_RDBDIMODE_ENABLE); 1752 1753 /* Turn on Mbuf cluster free state machine */ 1754 if (!(BGE_IS_5705_PLUS(sc))) 1755 CSR_WRITE_4(sc, BGE_MBCF_MODE, BGE_MBCFMODE_ENABLE); 1756 1757 /* Turn on send BD completion state machine */ 1758 CSR_WRITE_4(sc, BGE_SBDC_MODE, BGE_SBDCMODE_ENABLE); 1759 1760 /* Turn on send data completion state machine */ 1761 CSR_WRITE_4(sc, BGE_SDC_MODE, BGE_SDCMODE_ENABLE); 1762 1763 /* Turn on send data initiator state machine */ 1764 CSR_WRITE_4(sc, BGE_SDI_MODE, BGE_SDIMODE_ENABLE); 1765 1766 /* Turn on send BD initiator state machine */ 1767 CSR_WRITE_4(sc, BGE_SBDI_MODE, BGE_SBDIMODE_ENABLE); 1768 1769 /* Turn on send BD selector state machine */ 1770 CSR_WRITE_4(sc, BGE_SRS_MODE, BGE_SRSMODE_ENABLE); 1771 1772 CSR_WRITE_4(sc, BGE_SDI_STATS_ENABLE_MASK, 0x007FFFFF); 1773 CSR_WRITE_4(sc, BGE_SDI_STATS_CTL, 1774 BGE_SDISTATSCTL_ENABLE | BGE_SDISTATSCTL_FASTER); 1775 1776 /* ack/clear link change events */ 1777 CSR_WRITE_4(sc, BGE_MAC_STS, BGE_MACSTAT_SYNC_CHANGED | 1778 BGE_MACSTAT_CFG_CHANGED | BGE_MACSTAT_MI_COMPLETE | 1779 BGE_MACSTAT_LINK_CHANGED); 1780 CSR_WRITE_4(sc, BGE_MI_STS, 0); 1781 1782 /* Enable PHY auto polling (for MII/GMII only) */ 1783 if (sc->bge_flags & BGE_FLAG_TBI) { 1784 CSR_WRITE_4(sc, BGE_MI_STS, BGE_MISTS_LINK); 1785 } else { 1786 BGE_SETBIT(sc, BGE_MI_MODE, BGE_MIMODE_AUTOPOLL | (10 << 16)); 1787 if (sc->bge_asicrev == BGE_ASICREV_BCM5700 && 1788 sc->bge_chipid != BGE_CHIPID_BCM5700_B2) 1789 CSR_WRITE_4(sc, BGE_MAC_EVT_ENB, 1790 BGE_EVTENB_MI_INTERRUPT); 1791 } 1792 1793 /* 1794 * Clear any pending link state attention. 1795 * Otherwise some link state change events may be lost until attention 1796 * is cleared by bge_intr() -> bge_link_upd() sequence. 1797 * It's not necessary on newer BCM chips - perhaps enabling link 1798 * state change attentions implies clearing pending attention. 1799 */ 1800 CSR_WRITE_4(sc, BGE_MAC_STS, BGE_MACSTAT_SYNC_CHANGED | 1801 BGE_MACSTAT_CFG_CHANGED | BGE_MACSTAT_MI_COMPLETE | 1802 BGE_MACSTAT_LINK_CHANGED); 1803 1804 /* Enable link state change attentions. */ 1805 BGE_SETBIT(sc, BGE_MAC_EVT_ENB, BGE_EVTENB_LINK_CHANGED); 1806 1807 return (0); 1808 } 1809 1810 const struct bge_revision * 1811 bge_lookup_rev(uint32_t chipid) 1812 { 1813 const struct bge_revision *br; 1814 1815 for (br = bge_revisions; br->br_name != NULL; br++) { 1816 if (br->br_chipid == chipid) 1817 return (br); 1818 } 1819 1820 for (br = bge_majorrevs; br->br_name != NULL; br++) { 1821 if (br->br_chipid == BGE_ASICREV(chipid)) 1822 return (br); 1823 } 1824 1825 return (NULL); 1826 } 1827 1828 const struct bge_vendor * 1829 bge_lookup_vendor(uint16_t vid) 1830 { 1831 const struct bge_vendor *v; 1832 1833 for (v = bge_vendors; v->v_name != NULL; v++) 1834 if (v->v_id == vid) 1835 return (v); 1836 1837 panic("%s: unknown vendor %d", __func__, vid); 1838 return (NULL); 1839 } 1840 1841 /* 1842 * Probe for a Broadcom chip. Check the PCI vendor and device IDs 1843 * against our list and return its name if we find a match. 1844 * 1845 * Note that since the Broadcom controller contains VPD support, we 1846 * try to get the device name string from the controller itself instead 1847 * of the compiled-in string. It guarantees we'll always announce the 1848 * right product name. We fall back to the compiled-in string when 1849 * VPD is unavailable or corrupt. 1850 */ 1851 static int 1852 bge_probe(device_t dev) 1853 { 1854 const struct bge_type *t = bge_devs; 1855 struct bge_softc *sc = device_get_softc(dev); 1856 uint16_t vid, did; 1857 1858 sc->bge_dev = dev; 1859 vid = pci_get_vendor(dev); 1860 did = pci_get_device(dev); 1861 while(t->bge_vid != 0) { 1862 if ((vid == t->bge_vid) && (did == t->bge_did)) { 1863 char model[64], buf[96]; 1864 const struct bge_revision *br; 1865 const struct bge_vendor *v; 1866 uint32_t id; 1867 1868 id = pci_read_config(dev, BGE_PCI_MISC_CTL, 4) & 1869 BGE_PCIMISCCTL_ASICREV; 1870 br = bge_lookup_rev(id); 1871 v = bge_lookup_vendor(vid); 1872 { 1873 #if __FreeBSD_version > 700024 1874 const char *pname; 1875 1876 if (bge_has_eaddr(sc) && 1877 pci_get_vpd_ident(dev, &pname) == 0) 1878 snprintf(model, 64, "%s", pname); 1879 else 1880 #endif 1881 snprintf(model, 64, "%s %s", 1882 v->v_name, 1883 br != NULL ? br->br_name : 1884 "NetXtreme Ethernet Controller"); 1885 } 1886 snprintf(buf, 96, "%s, %sASIC rev. %#04x", model, 1887 br != NULL ? "" : "unknown ", id >> 16); 1888 device_set_desc_copy(dev, buf); 1889 if (pci_get_subvendor(dev) == DELL_VENDORID) 1890 sc->bge_flags |= BGE_FLAG_NO_3LED; 1891 if (did == BCOM_DEVICEID_BCM5755M) 1892 sc->bge_flags |= BGE_FLAG_ADJUST_TRIM; 1893 return (0); 1894 } 1895 t++; 1896 } 1897 1898 return (ENXIO); 1899 } 1900 1901 static void 1902 bge_dma_free(struct bge_softc *sc) 1903 { 1904 int i; 1905 1906 /* Destroy DMA maps for RX buffers. */ 1907 for (i = 0; i < BGE_STD_RX_RING_CNT; i++) { 1908 if (sc->bge_cdata.bge_rx_std_dmamap[i]) 1909 bus_dmamap_destroy(sc->bge_cdata.bge_mtag, 1910 sc->bge_cdata.bge_rx_std_dmamap[i]); 1911 } 1912 1913 /* Destroy DMA maps for jumbo RX buffers. */ 1914 for (i = 0; i < BGE_JUMBO_RX_RING_CNT; i++) { 1915 if (sc->bge_cdata.bge_rx_jumbo_dmamap[i]) 1916 bus_dmamap_destroy(sc->bge_cdata.bge_mtag_jumbo, 1917 sc->bge_cdata.bge_rx_jumbo_dmamap[i]); 1918 } 1919 1920 /* Destroy DMA maps for TX buffers. */ 1921 for (i = 0; i < BGE_TX_RING_CNT; i++) { 1922 if (sc->bge_cdata.bge_tx_dmamap[i]) 1923 bus_dmamap_destroy(sc->bge_cdata.bge_mtag, 1924 sc->bge_cdata.bge_tx_dmamap[i]); 1925 } 1926 1927 if (sc->bge_cdata.bge_mtag) 1928 bus_dma_tag_destroy(sc->bge_cdata.bge_mtag); 1929 1930 1931 /* Destroy standard RX ring. */ 1932 if (sc->bge_cdata.bge_rx_std_ring_map) 1933 bus_dmamap_unload(sc->bge_cdata.bge_rx_std_ring_tag, 1934 sc->bge_cdata.bge_rx_std_ring_map); 1935 if (sc->bge_cdata.bge_rx_std_ring_map && sc->bge_ldata.bge_rx_std_ring) 1936 bus_dmamem_free(sc->bge_cdata.bge_rx_std_ring_tag, 1937 sc->bge_ldata.bge_rx_std_ring, 1938 sc->bge_cdata.bge_rx_std_ring_map); 1939 1940 if (sc->bge_cdata.bge_rx_std_ring_tag) 1941 bus_dma_tag_destroy(sc->bge_cdata.bge_rx_std_ring_tag); 1942 1943 /* Destroy jumbo RX ring. */ 1944 if (sc->bge_cdata.bge_rx_jumbo_ring_map) 1945 bus_dmamap_unload(sc->bge_cdata.bge_rx_jumbo_ring_tag, 1946 sc->bge_cdata.bge_rx_jumbo_ring_map); 1947 1948 if (sc->bge_cdata.bge_rx_jumbo_ring_map && 1949 sc->bge_ldata.bge_rx_jumbo_ring) 1950 bus_dmamem_free(sc->bge_cdata.bge_rx_jumbo_ring_tag, 1951 sc->bge_ldata.bge_rx_jumbo_ring, 1952 sc->bge_cdata.bge_rx_jumbo_ring_map); 1953 1954 if (sc->bge_cdata.bge_rx_jumbo_ring_tag) 1955 bus_dma_tag_destroy(sc->bge_cdata.bge_rx_jumbo_ring_tag); 1956 1957 /* Destroy RX return ring. */ 1958 if (sc->bge_cdata.bge_rx_return_ring_map) 1959 bus_dmamap_unload(sc->bge_cdata.bge_rx_return_ring_tag, 1960 sc->bge_cdata.bge_rx_return_ring_map); 1961 1962 if (sc->bge_cdata.bge_rx_return_ring_map && 1963 sc->bge_ldata.bge_rx_return_ring) 1964 bus_dmamem_free(sc->bge_cdata.bge_rx_return_ring_tag, 1965 sc->bge_ldata.bge_rx_return_ring, 1966 sc->bge_cdata.bge_rx_return_ring_map); 1967 1968 if (sc->bge_cdata.bge_rx_return_ring_tag) 1969 bus_dma_tag_destroy(sc->bge_cdata.bge_rx_return_ring_tag); 1970 1971 /* Destroy TX ring. */ 1972 if (sc->bge_cdata.bge_tx_ring_map) 1973 bus_dmamap_unload(sc->bge_cdata.bge_tx_ring_tag, 1974 sc->bge_cdata.bge_tx_ring_map); 1975 1976 if (sc->bge_cdata.bge_tx_ring_map && sc->bge_ldata.bge_tx_ring) 1977 bus_dmamem_free(sc->bge_cdata.bge_tx_ring_tag, 1978 sc->bge_ldata.bge_tx_ring, 1979 sc->bge_cdata.bge_tx_ring_map); 1980 1981 if (sc->bge_cdata.bge_tx_ring_tag) 1982 bus_dma_tag_destroy(sc->bge_cdata.bge_tx_ring_tag); 1983 1984 /* Destroy status block. */ 1985 if (sc->bge_cdata.bge_status_map) 1986 bus_dmamap_unload(sc->bge_cdata.bge_status_tag, 1987 sc->bge_cdata.bge_status_map); 1988 1989 if (sc->bge_cdata.bge_status_map && sc->bge_ldata.bge_status_block) 1990 bus_dmamem_free(sc->bge_cdata.bge_status_tag, 1991 sc->bge_ldata.bge_status_block, 1992 sc->bge_cdata.bge_status_map); 1993 1994 if (sc->bge_cdata.bge_status_tag) 1995 bus_dma_tag_destroy(sc->bge_cdata.bge_status_tag); 1996 1997 /* Destroy statistics block. */ 1998 if (sc->bge_cdata.bge_stats_map) 1999 bus_dmamap_unload(sc->bge_cdata.bge_stats_tag, 2000 sc->bge_cdata.bge_stats_map); 2001 2002 if (sc->bge_cdata.bge_stats_map && sc->bge_ldata.bge_stats) 2003 bus_dmamem_free(sc->bge_cdata.bge_stats_tag, 2004 sc->bge_ldata.bge_stats, 2005 sc->bge_cdata.bge_stats_map); 2006 2007 if (sc->bge_cdata.bge_stats_tag) 2008 bus_dma_tag_destroy(sc->bge_cdata.bge_stats_tag); 2009 2010 /* Destroy the parent tag. */ 2011 if (sc->bge_cdata.bge_parent_tag) 2012 bus_dma_tag_destroy(sc->bge_cdata.bge_parent_tag); 2013 } 2014 2015 static int 2016 bge_dma_alloc(device_t dev) 2017 { 2018 struct bge_dmamap_arg ctx; 2019 struct bge_softc *sc; 2020 int i, error; 2021 2022 sc = device_get_softc(dev); 2023 2024 /* 2025 * Allocate the parent bus DMA tag appropriate for PCI. 2026 */ 2027 error = bus_dma_tag_create(bus_get_dma_tag(sc->bge_dev), 2028 1, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, 2029 NULL, BUS_SPACE_MAXSIZE_32BIT, 0, BUS_SPACE_MAXSIZE_32BIT, 2030 0, NULL, NULL, &sc->bge_cdata.bge_parent_tag); 2031 2032 if (error != 0) { 2033 device_printf(sc->bge_dev, 2034 "could not allocate parent dma tag\n"); 2035 return (ENOMEM); 2036 } 2037 2038 /* 2039 * Create tag for mbufs. 2040 */ 2041 error = bus_dma_tag_create(sc->bge_cdata.bge_parent_tag, 1, 2042 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, 2043 NULL, MCLBYTES * BGE_NSEG_NEW, BGE_NSEG_NEW, MCLBYTES, 2044 BUS_DMA_ALLOCNOW, NULL, NULL, &sc->bge_cdata.bge_mtag); 2045 2046 if (error) { 2047 device_printf(sc->bge_dev, "could not allocate dma tag\n"); 2048 return (ENOMEM); 2049 } 2050 2051 /* Create DMA maps for RX buffers. */ 2052 for (i = 0; i < BGE_STD_RX_RING_CNT; i++) { 2053 error = bus_dmamap_create(sc->bge_cdata.bge_mtag, 0, 2054 &sc->bge_cdata.bge_rx_std_dmamap[i]); 2055 if (error) { 2056 device_printf(sc->bge_dev, 2057 "can't create DMA map for RX\n"); 2058 return (ENOMEM); 2059 } 2060 } 2061 2062 /* Create DMA maps for TX buffers. */ 2063 for (i = 0; i < BGE_TX_RING_CNT; i++) { 2064 error = bus_dmamap_create(sc->bge_cdata.bge_mtag, 0, 2065 &sc->bge_cdata.bge_tx_dmamap[i]); 2066 if (error) { 2067 device_printf(sc->bge_dev, 2068 "can't create DMA map for RX\n"); 2069 return (ENOMEM); 2070 } 2071 } 2072 2073 /* Create tag for standard RX ring. */ 2074 error = bus_dma_tag_create(sc->bge_cdata.bge_parent_tag, 2075 PAGE_SIZE, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, 2076 NULL, BGE_STD_RX_RING_SZ, 1, BGE_STD_RX_RING_SZ, 0, 2077 NULL, NULL, &sc->bge_cdata.bge_rx_std_ring_tag); 2078 2079 if (error) { 2080 device_printf(sc->bge_dev, "could not allocate dma tag\n"); 2081 return (ENOMEM); 2082 } 2083 2084 /* Allocate DMA'able memory for standard RX ring. */ 2085 error = bus_dmamem_alloc(sc->bge_cdata.bge_rx_std_ring_tag, 2086 (void **)&sc->bge_ldata.bge_rx_std_ring, BUS_DMA_NOWAIT, 2087 &sc->bge_cdata.bge_rx_std_ring_map); 2088 if (error) 2089 return (ENOMEM); 2090 2091 bzero((char *)sc->bge_ldata.bge_rx_std_ring, BGE_STD_RX_RING_SZ); 2092 2093 /* Load the address of the standard RX ring. */ 2094 ctx.bge_maxsegs = 1; 2095 ctx.sc = sc; 2096 2097 error = bus_dmamap_load(sc->bge_cdata.bge_rx_std_ring_tag, 2098 sc->bge_cdata.bge_rx_std_ring_map, sc->bge_ldata.bge_rx_std_ring, 2099 BGE_STD_RX_RING_SZ, bge_dma_map_addr, &ctx, BUS_DMA_NOWAIT); 2100 2101 if (error) 2102 return (ENOMEM); 2103 2104 sc->bge_ldata.bge_rx_std_ring_paddr = ctx.bge_busaddr; 2105 2106 /* Create tags for jumbo mbufs. */ 2107 if (BGE_IS_JUMBO_CAPABLE(sc)) { 2108 error = bus_dma_tag_create(sc->bge_cdata.bge_parent_tag, 2109 1, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, 2110 NULL, MJUM9BYTES, BGE_NSEG_JUMBO, PAGE_SIZE, 2111 0, NULL, NULL, &sc->bge_cdata.bge_mtag_jumbo); 2112 if (error) { 2113 device_printf(sc->bge_dev, 2114 "could not allocate jumbo dma tag\n"); 2115 return (ENOMEM); 2116 } 2117 2118 /* Create tag for jumbo RX ring. */ 2119 error = bus_dma_tag_create(sc->bge_cdata.bge_parent_tag, 2120 PAGE_SIZE, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, 2121 NULL, BGE_JUMBO_RX_RING_SZ, 1, BGE_JUMBO_RX_RING_SZ, 0, 2122 NULL, NULL, &sc->bge_cdata.bge_rx_jumbo_ring_tag); 2123 2124 if (error) { 2125 device_printf(sc->bge_dev, 2126 "could not allocate jumbo ring dma tag\n"); 2127 return (ENOMEM); 2128 } 2129 2130 /* Allocate DMA'able memory for jumbo RX ring. */ 2131 error = bus_dmamem_alloc(sc->bge_cdata.bge_rx_jumbo_ring_tag, 2132 (void **)&sc->bge_ldata.bge_rx_jumbo_ring, 2133 BUS_DMA_NOWAIT | BUS_DMA_ZERO, 2134 &sc->bge_cdata.bge_rx_jumbo_ring_map); 2135 if (error) 2136 return (ENOMEM); 2137 2138 /* Load the address of the jumbo RX ring. */ 2139 ctx.bge_maxsegs = 1; 2140 ctx.sc = sc; 2141 2142 error = bus_dmamap_load(sc->bge_cdata.bge_rx_jumbo_ring_tag, 2143 sc->bge_cdata.bge_rx_jumbo_ring_map, 2144 sc->bge_ldata.bge_rx_jumbo_ring, BGE_JUMBO_RX_RING_SZ, 2145 bge_dma_map_addr, &ctx, BUS_DMA_NOWAIT); 2146 2147 if (error) 2148 return (ENOMEM); 2149 2150 sc->bge_ldata.bge_rx_jumbo_ring_paddr = ctx.bge_busaddr; 2151 2152 /* Create DMA maps for jumbo RX buffers. */ 2153 for (i = 0; i < BGE_JUMBO_RX_RING_CNT; i++) { 2154 error = bus_dmamap_create(sc->bge_cdata.bge_mtag_jumbo, 2155 0, &sc->bge_cdata.bge_rx_jumbo_dmamap[i]); 2156 if (error) { 2157 device_printf(sc->bge_dev, 2158 "can't create DMA map for jumbo RX\n"); 2159 return (ENOMEM); 2160 } 2161 } 2162 2163 } 2164 2165 /* Create tag for RX return ring. */ 2166 error = bus_dma_tag_create(sc->bge_cdata.bge_parent_tag, 2167 PAGE_SIZE, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, 2168 NULL, BGE_RX_RTN_RING_SZ(sc), 1, BGE_RX_RTN_RING_SZ(sc), 0, 2169 NULL, NULL, &sc->bge_cdata.bge_rx_return_ring_tag); 2170 2171 if (error) { 2172 device_printf(sc->bge_dev, "could not allocate dma tag\n"); 2173 return (ENOMEM); 2174 } 2175 2176 /* Allocate DMA'able memory for RX return ring. */ 2177 error = bus_dmamem_alloc(sc->bge_cdata.bge_rx_return_ring_tag, 2178 (void **)&sc->bge_ldata.bge_rx_return_ring, BUS_DMA_NOWAIT, 2179 &sc->bge_cdata.bge_rx_return_ring_map); 2180 if (error) 2181 return (ENOMEM); 2182 2183 bzero((char *)sc->bge_ldata.bge_rx_return_ring, 2184 BGE_RX_RTN_RING_SZ(sc)); 2185 2186 /* Load the address of the RX return ring. */ 2187 ctx.bge_maxsegs = 1; 2188 ctx.sc = sc; 2189 2190 error = bus_dmamap_load(sc->bge_cdata.bge_rx_return_ring_tag, 2191 sc->bge_cdata.bge_rx_return_ring_map, 2192 sc->bge_ldata.bge_rx_return_ring, BGE_RX_RTN_RING_SZ(sc), 2193 bge_dma_map_addr, &ctx, BUS_DMA_NOWAIT); 2194 2195 if (error) 2196 return (ENOMEM); 2197 2198 sc->bge_ldata.bge_rx_return_ring_paddr = ctx.bge_busaddr; 2199 2200 /* Create tag for TX ring. */ 2201 error = bus_dma_tag_create(sc->bge_cdata.bge_parent_tag, 2202 PAGE_SIZE, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, 2203 NULL, BGE_TX_RING_SZ, 1, BGE_TX_RING_SZ, 0, NULL, NULL, 2204 &sc->bge_cdata.bge_tx_ring_tag); 2205 2206 if (error) { 2207 device_printf(sc->bge_dev, "could not allocate dma tag\n"); 2208 return (ENOMEM); 2209 } 2210 2211 /* Allocate DMA'able memory for TX ring. */ 2212 error = bus_dmamem_alloc(sc->bge_cdata.bge_tx_ring_tag, 2213 (void **)&sc->bge_ldata.bge_tx_ring, BUS_DMA_NOWAIT, 2214 &sc->bge_cdata.bge_tx_ring_map); 2215 if (error) 2216 return (ENOMEM); 2217 2218 bzero((char *)sc->bge_ldata.bge_tx_ring, BGE_TX_RING_SZ); 2219 2220 /* Load the address of the TX ring. */ 2221 ctx.bge_maxsegs = 1; 2222 ctx.sc = sc; 2223 2224 error = bus_dmamap_load(sc->bge_cdata.bge_tx_ring_tag, 2225 sc->bge_cdata.bge_tx_ring_map, sc->bge_ldata.bge_tx_ring, 2226 BGE_TX_RING_SZ, bge_dma_map_addr, &ctx, BUS_DMA_NOWAIT); 2227 2228 if (error) 2229 return (ENOMEM); 2230 2231 sc->bge_ldata.bge_tx_ring_paddr = ctx.bge_busaddr; 2232 2233 /* Create tag for status block. */ 2234 error = bus_dma_tag_create(sc->bge_cdata.bge_parent_tag, 2235 PAGE_SIZE, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, 2236 NULL, BGE_STATUS_BLK_SZ, 1, BGE_STATUS_BLK_SZ, 0, 2237 NULL, NULL, &sc->bge_cdata.bge_status_tag); 2238 2239 if (error) { 2240 device_printf(sc->bge_dev, "could not allocate dma tag\n"); 2241 return (ENOMEM); 2242 } 2243 2244 /* Allocate DMA'able memory for status block. */ 2245 error = bus_dmamem_alloc(sc->bge_cdata.bge_status_tag, 2246 (void **)&sc->bge_ldata.bge_status_block, BUS_DMA_NOWAIT, 2247 &sc->bge_cdata.bge_status_map); 2248 if (error) 2249 return (ENOMEM); 2250 2251 bzero((char *)sc->bge_ldata.bge_status_block, BGE_STATUS_BLK_SZ); 2252 2253 /* Load the address of the status block. */ 2254 ctx.sc = sc; 2255 ctx.bge_maxsegs = 1; 2256 2257 error = bus_dmamap_load(sc->bge_cdata.bge_status_tag, 2258 sc->bge_cdata.bge_status_map, sc->bge_ldata.bge_status_block, 2259 BGE_STATUS_BLK_SZ, bge_dma_map_addr, &ctx, BUS_DMA_NOWAIT); 2260 2261 if (error) 2262 return (ENOMEM); 2263 2264 sc->bge_ldata.bge_status_block_paddr = ctx.bge_busaddr; 2265 2266 /* Create tag for statistics block. */ 2267 error = bus_dma_tag_create(sc->bge_cdata.bge_parent_tag, 2268 PAGE_SIZE, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, 2269 NULL, BGE_STATS_SZ, 1, BGE_STATS_SZ, 0, NULL, NULL, 2270 &sc->bge_cdata.bge_stats_tag); 2271 2272 if (error) { 2273 device_printf(sc->bge_dev, "could not allocate dma tag\n"); 2274 return (ENOMEM); 2275 } 2276 2277 /* Allocate DMA'able memory for statistics block. */ 2278 error = bus_dmamem_alloc(sc->bge_cdata.bge_stats_tag, 2279 (void **)&sc->bge_ldata.bge_stats, BUS_DMA_NOWAIT, 2280 &sc->bge_cdata.bge_stats_map); 2281 if (error) 2282 return (ENOMEM); 2283 2284 bzero((char *)sc->bge_ldata.bge_stats, BGE_STATS_SZ); 2285 2286 /* Load the address of the statstics block. */ 2287 ctx.sc = sc; 2288 ctx.bge_maxsegs = 1; 2289 2290 error = bus_dmamap_load(sc->bge_cdata.bge_stats_tag, 2291 sc->bge_cdata.bge_stats_map, sc->bge_ldata.bge_stats, 2292 BGE_STATS_SZ, bge_dma_map_addr, &ctx, BUS_DMA_NOWAIT); 2293 2294 if (error) 2295 return (ENOMEM); 2296 2297 sc->bge_ldata.bge_stats_paddr = ctx.bge_busaddr; 2298 2299 return (0); 2300 } 2301 2302 #if __FreeBSD_version > 602105 2303 /* 2304 * Return true if this device has more than one port. 2305 */ 2306 static int 2307 bge_has_multiple_ports(struct bge_softc *sc) 2308 { 2309 device_t dev = sc->bge_dev; 2310 u_int b, d, f, fscan, s; 2311 2312 d = pci_get_domain(dev); 2313 b = pci_get_bus(dev); 2314 s = pci_get_slot(dev); 2315 f = pci_get_function(dev); 2316 for (fscan = 0; fscan <= PCI_FUNCMAX; fscan++) 2317 if (fscan != f && pci_find_dbsf(d, b, s, fscan) != NULL) 2318 return (1); 2319 return (0); 2320 } 2321 2322 /* 2323 * Return true if MSI can be used with this device. 2324 */ 2325 static int 2326 bge_can_use_msi(struct bge_softc *sc) 2327 { 2328 int can_use_msi = 0; 2329 2330 switch (sc->bge_asicrev) { 2331 case BGE_ASICREV_BCM5714_A0: 2332 case BGE_ASICREV_BCM5714: 2333 /* 2334 * Apparently, MSI doesn't work when these chips are 2335 * configured in single-port mode. 2336 */ 2337 if (bge_has_multiple_ports(sc)) 2338 can_use_msi = 1; 2339 break; 2340 case BGE_ASICREV_BCM5750: 2341 if (sc->bge_chiprev != BGE_CHIPREV_5750_AX && 2342 sc->bge_chiprev != BGE_CHIPREV_5750_BX) 2343 can_use_msi = 1; 2344 break; 2345 default: 2346 if (BGE_IS_575X_PLUS(sc)) 2347 can_use_msi = 1; 2348 } 2349 return (can_use_msi); 2350 } 2351 #endif 2352 2353 static int 2354 bge_attach(device_t dev) 2355 { 2356 struct ifnet *ifp; 2357 struct bge_softc *sc; 2358 uint32_t hwcfg = 0, misccfg; 2359 u_char eaddr[ETHER_ADDR_LEN]; 2360 int error, reg, rid, trys; 2361 2362 sc = device_get_softc(dev); 2363 sc->bge_dev = dev; 2364 2365 /* 2366 * Map control/status registers. 2367 */ 2368 pci_enable_busmaster(dev); 2369 2370 rid = BGE_PCI_BAR0; 2371 sc->bge_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, 2372 RF_ACTIVE); 2373 2374 if (sc->bge_res == NULL) { 2375 device_printf (sc->bge_dev, "couldn't map memory\n"); 2376 error = ENXIO; 2377 goto fail; 2378 } 2379 2380 /* Save ASIC rev. */ 2381 sc->bge_chipid = 2382 pci_read_config(dev, BGE_PCI_MISC_CTL, 4) & 2383 BGE_PCIMISCCTL_ASICREV; 2384 sc->bge_asicrev = BGE_ASICREV(sc->bge_chipid); 2385 sc->bge_chiprev = BGE_CHIPREV(sc->bge_chipid); 2386 2387 /* 2388 * Don't enable Ethernet@WireSpeed for the 5700, 5906, or the 2389 * 5705 A0 and A1 chips. 2390 */ 2391 if (sc->bge_asicrev != BGE_ASICREV_BCM5700 && 2392 sc->bge_asicrev != BGE_ASICREV_BCM5906 && 2393 sc->bge_chipid != BGE_CHIPID_BCM5705_A0 && 2394 sc->bge_chipid != BGE_CHIPID_BCM5705_A1) 2395 sc->bge_flags |= BGE_FLAG_WIRESPEED; 2396 2397 if (bge_has_eaddr(sc)) 2398 sc->bge_flags |= BGE_FLAG_EADDR; 2399 2400 /* Save chipset family. */ 2401 switch (sc->bge_asicrev) { 2402 case BGE_ASICREV_BCM5700: 2403 case BGE_ASICREV_BCM5701: 2404 case BGE_ASICREV_BCM5703: 2405 case BGE_ASICREV_BCM5704: 2406 sc->bge_flags |= BGE_FLAG_5700_FAMILY | BGE_FLAG_JUMBO; 2407 break; 2408 case BGE_ASICREV_BCM5714_A0: 2409 case BGE_ASICREV_BCM5780: 2410 case BGE_ASICREV_BCM5714: 2411 sc->bge_flags |= BGE_FLAG_5714_FAMILY /* | BGE_FLAG_JUMBO */; 2412 /* FALLTHRU */ 2413 case BGE_ASICREV_BCM5750: 2414 case BGE_ASICREV_BCM5752: 2415 case BGE_ASICREV_BCM5755: 2416 case BGE_ASICREV_BCM5787: 2417 case BGE_ASICREV_BCM5906: 2418 sc->bge_flags |= BGE_FLAG_575X_PLUS; 2419 /* FALLTHRU */ 2420 case BGE_ASICREV_BCM5705: 2421 sc->bge_flags |= BGE_FLAG_5705_PLUS; 2422 break; 2423 } 2424 2425 /* Set various bug flags. */ 2426 if (sc->bge_chipid == BGE_CHIPID_BCM5701_A0 || 2427 sc->bge_chipid == BGE_CHIPID_BCM5701_B0) 2428 sc->bge_flags |= BGE_FLAG_CRC_BUG; 2429 if (sc->bge_chiprev == BGE_CHIPREV_5703_AX || 2430 sc->bge_chiprev == BGE_CHIPREV_5704_AX) 2431 sc->bge_flags |= BGE_FLAG_ADC_BUG; 2432 if (sc->bge_chipid == BGE_CHIPID_BCM5704_A0) 2433 sc->bge_flags |= BGE_FLAG_5704_A0_BUG; 2434 if (BGE_IS_5705_PLUS(sc) && 2435 !(sc->bge_flags & BGE_FLAG_ADJUST_TRIM)) { 2436 if (sc->bge_asicrev == BGE_ASICREV_BCM5755 || 2437 sc->bge_asicrev == BGE_ASICREV_BCM5787) { 2438 if (sc->bge_chipid != BGE_CHIPID_BCM5722_A0) 2439 sc->bge_flags |= BGE_FLAG_JITTER_BUG; 2440 } else if (sc->bge_asicrev != BGE_ASICREV_BCM5906) 2441 sc->bge_flags |= BGE_FLAG_BER_BUG; 2442 } 2443 2444 2445 /* 2446 * We could possibly check for BCOM_DEVICEID_BCM5788 in bge_probe() 2447 * but I do not know the DEVICEID for the 5788M. 2448 */ 2449 misccfg = CSR_READ_4(sc, BGE_MISC_CFG) & BGE_MISCCFG_BOARD_ID; 2450 if (misccfg == BGE_MISCCFG_BOARD_ID_5788 || 2451 misccfg == BGE_MISCCFG_BOARD_ID_5788M) 2452 sc->bge_flags |= BGE_FLAG_5788; 2453 2454 /* 2455 * Check if this is a PCI-X or PCI Express device. 2456 */ 2457 #if __FreeBSD_version > 602101 2458 if (pci_find_extcap(dev, PCIY_EXPRESS, ®) == 0) { 2459 /* 2460 * Found a PCI Express capabilities register, this 2461 * must be a PCI Express device. 2462 */ 2463 if (reg != 0) 2464 sc->bge_flags |= BGE_FLAG_PCIE; 2465 } else if (pci_find_extcap(dev, PCIY_PCIX, ®) == 0) { 2466 if (reg != 0) 2467 sc->bge_flags |= BGE_FLAG_PCIX; 2468 } 2469 2470 #else 2471 if (BGE_IS_5705_PLUS(sc)) { 2472 reg = pci_read_config(dev, BGE_PCIE_CAPID_REG, 4); 2473 if ((reg & 0xFF) == BGE_PCIE_CAPID) 2474 sc->bge_flags |= BGE_FLAG_PCIE; 2475 } else { 2476 /* 2477 * Check if the device is in PCI-X Mode. 2478 * (This bit is not valid on PCI Express controllers.) 2479 */ 2480 if ((pci_read_config(sc->bge_dev, BGE_PCI_PCISTATE, 4) & 2481 BGE_PCISTATE_PCI_BUSMODE) == 0) 2482 sc->bge_flags |= BGE_FLAG_PCIX; 2483 } 2484 #endif 2485 2486 #if __FreeBSD_version > 602105 2487 { 2488 int msicount; 2489 2490 /* 2491 * Allocate the interrupt, using MSI if possible. These devices 2492 * support 8 MSI messages, but only the first one is used in 2493 * normal operation. 2494 */ 2495 if (bge_can_use_msi(sc)) { 2496 msicount = pci_msi_count(dev); 2497 if (msicount > 1) 2498 msicount = 1; 2499 } else 2500 msicount = 0; 2501 if (msicount == 1 && pci_alloc_msi(dev, &msicount) == 0) { 2502 rid = 1; 2503 sc->bge_flags |= BGE_FLAG_MSI; 2504 } else 2505 rid = 0; 2506 } 2507 #else 2508 rid = 0; 2509 #endif 2510 2511 sc->bge_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, 2512 RF_SHAREABLE | RF_ACTIVE); 2513 2514 if (sc->bge_irq == NULL) { 2515 device_printf(sc->bge_dev, "couldn't map interrupt\n"); 2516 error = ENXIO; 2517 goto fail; 2518 } 2519 2520 BGE_LOCK_INIT(sc, device_get_nameunit(dev)); 2521 2522 /* Try to reset the chip. */ 2523 if (bge_reset(sc)) { 2524 device_printf(sc->bge_dev, "chip reset failed\n"); 2525 error = ENXIO; 2526 goto fail; 2527 } 2528 2529 sc->bge_asf_mode = 0; 2530 if (bge_allow_asf && (bge_readmem_ind(sc, BGE_SOFTWARE_GENCOMM_SIG) 2531 == BGE_MAGIC_NUMBER)) { 2532 if (bge_readmem_ind(sc, BGE_SOFTWARE_GENCOMM_NICCFG) 2533 & BGE_HWCFG_ASF) { 2534 sc->bge_asf_mode |= ASF_ENABLE; 2535 sc->bge_asf_mode |= ASF_STACKUP; 2536 if (sc->bge_asicrev == BGE_ASICREV_BCM5750) { 2537 sc->bge_asf_mode |= ASF_NEW_HANDSHAKE; 2538 } 2539 } 2540 } 2541 2542 /* Try to reset the chip again the nice way. */ 2543 bge_stop_fw(sc); 2544 bge_sig_pre_reset(sc, BGE_RESET_STOP); 2545 if (bge_reset(sc)) { 2546 device_printf(sc->bge_dev, "chip reset failed\n"); 2547 error = ENXIO; 2548 goto fail; 2549 } 2550 2551 bge_sig_legacy(sc, BGE_RESET_STOP); 2552 bge_sig_post_reset(sc, BGE_RESET_STOP); 2553 2554 if (bge_chipinit(sc)) { 2555 device_printf(sc->bge_dev, "chip initialization failed\n"); 2556 error = ENXIO; 2557 goto fail; 2558 } 2559 2560 error = bge_get_eaddr(sc, eaddr); 2561 if (error) { 2562 device_printf(sc->bge_dev, 2563 "failed to read station address\n"); 2564 error = ENXIO; 2565 goto fail; 2566 } 2567 2568 /* 5705 limits RX return ring to 512 entries. */ 2569 if (BGE_IS_5705_PLUS(sc)) 2570 sc->bge_return_ring_cnt = BGE_RETURN_RING_CNT_5705; 2571 else 2572 sc->bge_return_ring_cnt = BGE_RETURN_RING_CNT; 2573 2574 if (bge_dma_alloc(dev)) { 2575 device_printf(sc->bge_dev, 2576 "failed to allocate DMA resources\n"); 2577 error = ENXIO; 2578 goto fail; 2579 } 2580 2581 /* Set default tuneable values. */ 2582 sc->bge_stat_ticks = BGE_TICKS_PER_SEC; 2583 sc->bge_rx_coal_ticks = 150; 2584 sc->bge_tx_coal_ticks = 150; 2585 sc->bge_rx_max_coal_bds = 10; 2586 sc->bge_tx_max_coal_bds = 10; 2587 2588 /* Set up ifnet structure */ 2589 ifp = sc->bge_ifp = if_alloc(IFT_ETHER); 2590 if (ifp == NULL) { 2591 device_printf(sc->bge_dev, "failed to if_alloc()\n"); 2592 error = ENXIO; 2593 goto fail; 2594 } 2595 ifp->if_softc = sc; 2596 if_initname(ifp, device_get_name(dev), device_get_unit(dev)); 2597 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 2598 ifp->if_ioctl = bge_ioctl; 2599 ifp->if_start = bge_start; 2600 ifp->if_init = bge_init; 2601 ifp->if_mtu = ETHERMTU; 2602 ifp->if_snd.ifq_drv_maxlen = BGE_TX_RING_CNT - 1; 2603 IFQ_SET_MAXLEN(&ifp->if_snd, ifp->if_snd.ifq_drv_maxlen); 2604 IFQ_SET_READY(&ifp->if_snd); 2605 ifp->if_hwassist = BGE_CSUM_FEATURES; 2606 ifp->if_capabilities = IFCAP_HWCSUM | IFCAP_VLAN_HWTAGGING | 2607 IFCAP_VLAN_MTU; 2608 #ifdef IFCAP_VLAN_HWCSUM 2609 ifp->if_capabilities |= IFCAP_VLAN_HWCSUM; 2610 #endif 2611 ifp->if_capenable = ifp->if_capabilities; 2612 #ifdef DEVICE_POLLING 2613 ifp->if_capabilities |= IFCAP_POLLING; 2614 #endif 2615 2616 /* 2617 * 5700 B0 chips do not support checksumming correctly due 2618 * to hardware bugs. 2619 */ 2620 if (sc->bge_chipid == BGE_CHIPID_BCM5700_B0) { 2621 ifp->if_capabilities &= ~IFCAP_HWCSUM; 2622 ifp->if_capenable &= IFCAP_HWCSUM; 2623 ifp->if_hwassist = 0; 2624 } 2625 2626 /* 2627 * Figure out what sort of media we have by checking the 2628 * hardware config word in the first 32k of NIC internal memory, 2629 * or fall back to examining the EEPROM if necessary. 2630 * Note: on some BCM5700 cards, this value appears to be unset. 2631 * If that's the case, we have to rely on identifying the NIC 2632 * by its PCI subsystem ID, as we do below for the SysKonnect 2633 * SK-9D41. 2634 */ 2635 if (bge_readmem_ind(sc, BGE_SOFTWARE_GENCOMM_SIG) == BGE_MAGIC_NUMBER) 2636 hwcfg = bge_readmem_ind(sc, BGE_SOFTWARE_GENCOMM_NICCFG); 2637 else if ((sc->bge_flags & BGE_FLAG_EADDR) && 2638 (sc->bge_asicrev != BGE_ASICREV_BCM5906)) { 2639 if (bge_read_eeprom(sc, (caddr_t)&hwcfg, BGE_EE_HWCFG_OFFSET, 2640 sizeof(hwcfg))) { 2641 device_printf(sc->bge_dev, "failed to read EEPROM\n"); 2642 error = ENXIO; 2643 goto fail; 2644 } 2645 hwcfg = ntohl(hwcfg); 2646 } 2647 2648 if ((hwcfg & BGE_HWCFG_MEDIA) == BGE_MEDIA_FIBER) 2649 sc->bge_flags |= BGE_FLAG_TBI; 2650 2651 /* The SysKonnect SK-9D41 is a 1000baseSX card. */ 2652 if ((pci_read_config(dev, BGE_PCI_SUBSYS, 4) >> 16) == SK_SUBSYSID_9D41) 2653 sc->bge_flags |= BGE_FLAG_TBI; 2654 2655 if (sc->bge_flags & BGE_FLAG_TBI) { 2656 ifmedia_init(&sc->bge_ifmedia, IFM_IMASK, bge_ifmedia_upd, 2657 bge_ifmedia_sts); 2658 ifmedia_add(&sc->bge_ifmedia, IFM_ETHER | IFM_1000_SX, 0, NULL); 2659 ifmedia_add(&sc->bge_ifmedia, IFM_ETHER | IFM_1000_SX | IFM_FDX, 2660 0, NULL); 2661 ifmedia_add(&sc->bge_ifmedia, IFM_ETHER | IFM_AUTO, 0, NULL); 2662 ifmedia_set(&sc->bge_ifmedia, IFM_ETHER | IFM_AUTO); 2663 sc->bge_ifmedia.ifm_media = sc->bge_ifmedia.ifm_cur->ifm_media; 2664 } else { 2665 /* 2666 * Do transceiver setup and tell the firmware the 2667 * driver is down so we can try to get access the 2668 * probe if ASF is running. Retry a couple of times 2669 * if we get a conflict with the ASF firmware accessing 2670 * the PHY. 2671 */ 2672 BGE_CLRBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP); 2673 again: 2674 bge_asf_driver_up(sc); 2675 2676 trys = 0; 2677 if (mii_phy_probe(dev, &sc->bge_miibus, 2678 bge_ifmedia_upd, bge_ifmedia_sts)) { 2679 if (trys++ < 4) { 2680 device_printf(sc->bge_dev, "Try again\n"); 2681 bge_miibus_writereg(sc->bge_dev, 1, MII_BMCR, 2682 BMCR_RESET); 2683 goto again; 2684 } 2685 2686 device_printf(sc->bge_dev, "MII without any PHY!\n"); 2687 error = ENXIO; 2688 goto fail; 2689 } 2690 2691 /* 2692 * Now tell the firmware we are going up after probing the PHY 2693 */ 2694 if (sc->bge_asf_mode & ASF_STACKUP) 2695 BGE_SETBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP); 2696 } 2697 2698 /* 2699 * When using the BCM5701 in PCI-X mode, data corruption has 2700 * been observed in the first few bytes of some received packets. 2701 * Aligning the packet buffer in memory eliminates the corruption. 2702 * Unfortunately, this misaligns the packet payloads. On platforms 2703 * which do not support unaligned accesses, we will realign the 2704 * payloads by copying the received packets. 2705 */ 2706 if (sc->bge_asicrev == BGE_ASICREV_BCM5701 && 2707 sc->bge_flags & BGE_FLAG_PCIX) 2708 sc->bge_flags |= BGE_FLAG_RX_ALIGNBUG; 2709 2710 /* 2711 * Call MI attach routine. 2712 */ 2713 ether_ifattach(ifp, eaddr); 2714 callout_init_mtx(&sc->bge_stat_ch, &sc->bge_mtx, 0); 2715 2716 /* 2717 * Hookup IRQ last. 2718 */ 2719 #if __FreeBSD_version > 700030 2720 error = bus_setup_intr(dev, sc->bge_irq, INTR_TYPE_NET | INTR_MPSAFE, 2721 NULL, bge_intr, sc, &sc->bge_intrhand); 2722 #else 2723 error = bus_setup_intr(dev, sc->bge_irq, INTR_TYPE_NET | INTR_MPSAFE, 2724 bge_intr, sc, &sc->bge_intrhand); 2725 #endif 2726 2727 if (error) { 2728 bge_detach(dev); 2729 device_printf(sc->bge_dev, "couldn't set up irq\n"); 2730 } 2731 2732 bge_add_sysctls(sc); 2733 2734 return (0); 2735 2736 fail: 2737 bge_release_resources(sc); 2738 2739 return (error); 2740 } 2741 2742 static int 2743 bge_detach(device_t dev) 2744 { 2745 struct bge_softc *sc; 2746 struct ifnet *ifp; 2747 2748 sc = device_get_softc(dev); 2749 ifp = sc->bge_ifp; 2750 2751 #ifdef DEVICE_POLLING 2752 if (ifp->if_capenable & IFCAP_POLLING) 2753 ether_poll_deregister(ifp); 2754 #endif 2755 2756 BGE_LOCK(sc); 2757 bge_stop(sc); 2758 bge_reset(sc); 2759 BGE_UNLOCK(sc); 2760 2761 callout_drain(&sc->bge_stat_ch); 2762 2763 ether_ifdetach(ifp); 2764 2765 if (sc->bge_flags & BGE_FLAG_TBI) { 2766 ifmedia_removeall(&sc->bge_ifmedia); 2767 } else { 2768 bus_generic_detach(dev); 2769 device_delete_child(dev, sc->bge_miibus); 2770 } 2771 2772 bge_release_resources(sc); 2773 2774 return (0); 2775 } 2776 2777 static void 2778 bge_release_resources(struct bge_softc *sc) 2779 { 2780 device_t dev; 2781 2782 dev = sc->bge_dev; 2783 2784 if (sc->bge_intrhand != NULL) 2785 bus_teardown_intr(dev, sc->bge_irq, sc->bge_intrhand); 2786 2787 if (sc->bge_irq != NULL) 2788 bus_release_resource(dev, SYS_RES_IRQ, 2789 sc->bge_flags & BGE_FLAG_MSI ? 1 : 0, sc->bge_irq); 2790 2791 #if __FreeBSD_version > 602105 2792 if (sc->bge_flags & BGE_FLAG_MSI) 2793 pci_release_msi(dev); 2794 #endif 2795 2796 if (sc->bge_res != NULL) 2797 bus_release_resource(dev, SYS_RES_MEMORY, 2798 BGE_PCI_BAR0, sc->bge_res); 2799 2800 if (sc->bge_ifp != NULL) 2801 if_free(sc->bge_ifp); 2802 2803 bge_dma_free(sc); 2804 2805 if (mtx_initialized(&sc->bge_mtx)) /* XXX */ 2806 BGE_LOCK_DESTROY(sc); 2807 } 2808 2809 static int 2810 bge_reset(struct bge_softc *sc) 2811 { 2812 device_t dev; 2813 uint32_t cachesize, command, pcistate, reset, val; 2814 void (*write_op)(struct bge_softc *, int, int); 2815 int i; 2816 2817 dev = sc->bge_dev; 2818 2819 if (BGE_IS_575X_PLUS(sc) && !BGE_IS_5714_FAMILY(sc) && 2820 (sc->bge_asicrev != BGE_ASICREV_BCM5906)) { 2821 if (sc->bge_flags & BGE_FLAG_PCIE) 2822 write_op = bge_writemem_direct; 2823 else 2824 write_op = bge_writemem_ind; 2825 } else 2826 write_op = bge_writereg_ind; 2827 2828 /* Save some important PCI state. */ 2829 cachesize = pci_read_config(dev, BGE_PCI_CACHESZ, 4); 2830 command = pci_read_config(dev, BGE_PCI_CMD, 4); 2831 pcistate = pci_read_config(dev, BGE_PCI_PCISTATE, 4); 2832 2833 pci_write_config(dev, BGE_PCI_MISC_CTL, 2834 BGE_PCIMISCCTL_INDIRECT_ACCESS | BGE_PCIMISCCTL_MASK_PCI_INTR | 2835 BGE_HIF_SWAP_OPTIONS | BGE_PCIMISCCTL_PCISTATE_RW, 4); 2836 2837 /* Disable fastboot on controllers that support it. */ 2838 if (sc->bge_asicrev == BGE_ASICREV_BCM5752 || 2839 sc->bge_asicrev == BGE_ASICREV_BCM5755 || 2840 sc->bge_asicrev == BGE_ASICREV_BCM5787) { 2841 if (bootverbose) 2842 device_printf(sc->bge_dev, "Disabling fastboot\n"); 2843 CSR_WRITE_4(sc, BGE_FASTBOOT_PC, 0x0); 2844 } 2845 2846 /* 2847 * Write the magic number to SRAM at offset 0xB50. 2848 * When firmware finishes its initialization it will 2849 * write ~BGE_MAGIC_NUMBER to the same location. 2850 */ 2851 bge_writemem_ind(sc, BGE_SOFTWARE_GENCOMM, BGE_MAGIC_NUMBER); 2852 2853 reset = BGE_MISCCFG_RESET_CORE_CLOCKS | BGE_32BITTIME_66MHZ; 2854 2855 /* XXX: Broadcom Linux driver. */ 2856 if (sc->bge_flags & BGE_FLAG_PCIE) { 2857 if (CSR_READ_4(sc, 0x7E2C) == 0x60) /* PCIE 1.0 */ 2858 CSR_WRITE_4(sc, 0x7E2C, 0x20); 2859 if (sc->bge_chipid != BGE_CHIPID_BCM5750_A0) { 2860 /* Prevent PCIE link training during global reset */ 2861 CSR_WRITE_4(sc, BGE_MISC_CFG, 1 << 29); 2862 reset |= 1 << 29; 2863 } 2864 } 2865 2866 /* 2867 * Set GPHY Power Down Override to leave GPHY 2868 * powered up in D0 uninitialized. 2869 */ 2870 if (BGE_IS_5705_PLUS(sc)) 2871 reset |= 0x04000000; 2872 2873 /* Issue global reset */ 2874 write_op(sc, BGE_MISC_CFG, reset); 2875 2876 if (sc->bge_asicrev == BGE_ASICREV_BCM5906) { 2877 val = CSR_READ_4(sc, BGE_VCPU_STATUS); 2878 CSR_WRITE_4(sc, BGE_VCPU_STATUS, 2879 val | BGE_VCPU_STATUS_DRV_RESET); 2880 val = CSR_READ_4(sc, BGE_VCPU_EXT_CTRL); 2881 CSR_WRITE_4(sc, BGE_VCPU_EXT_CTRL, 2882 val & ~BGE_VCPU_EXT_CTRL_HALT_CPU); 2883 } 2884 2885 DELAY(1000); 2886 2887 /* XXX: Broadcom Linux driver. */ 2888 if (sc->bge_flags & BGE_FLAG_PCIE) { 2889 if (sc->bge_chipid == BGE_CHIPID_BCM5750_A0) { 2890 DELAY(500000); /* wait for link training to complete */ 2891 val = pci_read_config(dev, 0xC4, 4); 2892 pci_write_config(dev, 0xC4, val | (1 << 15), 4); 2893 } 2894 /* 2895 * Set PCIE max payload size to 128 bytes and clear error 2896 * status. 2897 */ 2898 pci_write_config(dev, 0xD8, 0xF5000, 4); 2899 } 2900 2901 /* Reset some of the PCI state that got zapped by reset. */ 2902 pci_write_config(dev, BGE_PCI_MISC_CTL, 2903 BGE_PCIMISCCTL_INDIRECT_ACCESS | BGE_PCIMISCCTL_MASK_PCI_INTR | 2904 BGE_HIF_SWAP_OPTIONS | BGE_PCIMISCCTL_PCISTATE_RW, 4); 2905 pci_write_config(dev, BGE_PCI_CACHESZ, cachesize, 4); 2906 pci_write_config(dev, BGE_PCI_CMD, command, 4); 2907 write_op(sc, BGE_MISC_CFG, BGE_32BITTIME_66MHZ); 2908 2909 /* Re-enable MSI, if neccesary, and enable the memory arbiter. */ 2910 if (BGE_IS_5714_FAMILY(sc)) { 2911 /* This chip disables MSI on reset. */ 2912 if (sc->bge_flags & BGE_FLAG_MSI) { 2913 val = pci_read_config(dev, BGE_PCI_MSI_CTL, 2); 2914 pci_write_config(dev, BGE_PCI_MSI_CTL, 2915 val | PCIM_MSICTRL_MSI_ENABLE, 2); 2916 val = CSR_READ_4(sc, BGE_MSI_MODE); 2917 CSR_WRITE_4(sc, BGE_MSI_MODE, 2918 val | BGE_MSIMODE_ENABLE); 2919 } 2920 val = CSR_READ_4(sc, BGE_MARB_MODE); 2921 CSR_WRITE_4(sc, BGE_MARB_MODE, BGE_MARBMODE_ENABLE | val); 2922 } else 2923 CSR_WRITE_4(sc, BGE_MARB_MODE, BGE_MARBMODE_ENABLE); 2924 2925 if (sc->bge_asicrev == BGE_ASICREV_BCM5906) { 2926 for (i = 0; i < BGE_TIMEOUT; i++) { 2927 val = CSR_READ_4(sc, BGE_VCPU_STATUS); 2928 if (val & BGE_VCPU_STATUS_INIT_DONE) 2929 break; 2930 DELAY(100); 2931 } 2932 if (i == BGE_TIMEOUT) { 2933 device_printf(sc->bge_dev, "reset timed out\n"); 2934 return (1); 2935 } 2936 } else { 2937 /* 2938 * Poll until we see the 1's complement of the magic number. 2939 * This indicates that the firmware initialization is complete. 2940 * We expect this to fail if no chip containing the Ethernet 2941 * address is fitted though. 2942 */ 2943 for (i = 0; i < BGE_TIMEOUT; i++) { 2944 DELAY(10); 2945 val = bge_readmem_ind(sc, BGE_SOFTWARE_GENCOMM); 2946 if (val == ~BGE_MAGIC_NUMBER) 2947 break; 2948 } 2949 2950 if ((sc->bge_flags & BGE_FLAG_EADDR) && i == BGE_TIMEOUT) 2951 device_printf(sc->bge_dev, "firmware handshake timed out, " 2952 "found 0x%08x\n", val); 2953 } 2954 2955 /* 2956 * XXX Wait for the value of the PCISTATE register to 2957 * return to its original pre-reset state. This is a 2958 * fairly good indicator of reset completion. If we don't 2959 * wait for the reset to fully complete, trying to read 2960 * from the device's non-PCI registers may yield garbage 2961 * results. 2962 */ 2963 for (i = 0; i < BGE_TIMEOUT; i++) { 2964 if (pci_read_config(dev, BGE_PCI_PCISTATE, 4) == pcistate) 2965 break; 2966 DELAY(10); 2967 } 2968 2969 if (sc->bge_flags & BGE_FLAG_PCIE) { 2970 reset = bge_readmem_ind(sc, 0x7C00); 2971 bge_writemem_ind(sc, 0x7C00, reset | (1 << 25)); 2972 } 2973 2974 /* Fix up byte swapping. */ 2975 CSR_WRITE_4(sc, BGE_MODE_CTL, BGE_DMA_SWAP_OPTIONS | 2976 BGE_MODECTL_BYTESWAP_DATA); 2977 2978 /* Tell the ASF firmware we are up */ 2979 if (sc->bge_asf_mode & ASF_STACKUP) 2980 BGE_SETBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP); 2981 2982 CSR_WRITE_4(sc, BGE_MAC_MODE, 0); 2983 2984 /* 2985 * The 5704 in TBI mode apparently needs some special 2986 * adjustment to insure the SERDES drive level is set 2987 * to 1.2V. 2988 */ 2989 if (sc->bge_asicrev == BGE_ASICREV_BCM5704 && 2990 sc->bge_flags & BGE_FLAG_TBI) { 2991 val = CSR_READ_4(sc, BGE_SERDES_CFG); 2992 val = (val & ~0xFFF) | 0x880; 2993 CSR_WRITE_4(sc, BGE_SERDES_CFG, val); 2994 } 2995 2996 /* XXX: Broadcom Linux driver. */ 2997 if (sc->bge_flags & BGE_FLAG_PCIE && 2998 sc->bge_chipid != BGE_CHIPID_BCM5750_A0) { 2999 val = CSR_READ_4(sc, 0x7C00); 3000 CSR_WRITE_4(sc, 0x7C00, val | (1 << 25)); 3001 } 3002 DELAY(10000); 3003 3004 return(0); 3005 } 3006 3007 /* 3008 * Frame reception handling. This is called if there's a frame 3009 * on the receive return list. 3010 * 3011 * Note: we have to be able to handle two possibilities here: 3012 * 1) the frame is from the jumbo receive ring 3013 * 2) the frame is from the standard receive ring 3014 */ 3015 3016 static void 3017 bge_rxeof(struct bge_softc *sc) 3018 { 3019 struct ifnet *ifp; 3020 int stdcnt = 0, jumbocnt = 0; 3021 3022 BGE_LOCK_ASSERT(sc); 3023 3024 /* Nothing to do. */ 3025 if (sc->bge_rx_saved_considx == 3026 sc->bge_ldata.bge_status_block->bge_idx[0].bge_rx_prod_idx) 3027 return; 3028 3029 ifp = sc->bge_ifp; 3030 3031 bus_dmamap_sync(sc->bge_cdata.bge_rx_return_ring_tag, 3032 sc->bge_cdata.bge_rx_return_ring_map, BUS_DMASYNC_POSTREAD); 3033 bus_dmamap_sync(sc->bge_cdata.bge_rx_std_ring_tag, 3034 sc->bge_cdata.bge_rx_std_ring_map, BUS_DMASYNC_POSTREAD); 3035 if (BGE_IS_JUMBO_CAPABLE(sc)) 3036 bus_dmamap_sync(sc->bge_cdata.bge_rx_jumbo_ring_tag, 3037 sc->bge_cdata.bge_rx_jumbo_ring_map, BUS_DMASYNC_POSTREAD); 3038 3039 while(sc->bge_rx_saved_considx != 3040 sc->bge_ldata.bge_status_block->bge_idx[0].bge_rx_prod_idx) { 3041 struct bge_rx_bd *cur_rx; 3042 uint32_t rxidx; 3043 struct mbuf *m = NULL; 3044 uint16_t vlan_tag = 0; 3045 int have_tag = 0; 3046 3047 #ifdef DEVICE_POLLING 3048 if (ifp->if_capenable & IFCAP_POLLING) { 3049 if (sc->rxcycles <= 0) 3050 break; 3051 sc->rxcycles--; 3052 } 3053 #endif 3054 3055 cur_rx = 3056 &sc->bge_ldata.bge_rx_return_ring[sc->bge_rx_saved_considx]; 3057 3058 rxidx = cur_rx->bge_idx; 3059 BGE_INC(sc->bge_rx_saved_considx, sc->bge_return_ring_cnt); 3060 3061 if (ifp->if_capenable & IFCAP_VLAN_HWTAGGING && 3062 cur_rx->bge_flags & BGE_RXBDFLAG_VLAN_TAG) { 3063 have_tag = 1; 3064 vlan_tag = cur_rx->bge_vlan_tag; 3065 } 3066 3067 if (cur_rx->bge_flags & BGE_RXBDFLAG_JUMBO_RING) { 3068 BGE_INC(sc->bge_jumbo, BGE_JUMBO_RX_RING_CNT); 3069 bus_dmamap_sync(sc->bge_cdata.bge_mtag_jumbo, 3070 sc->bge_cdata.bge_rx_jumbo_dmamap[rxidx], 3071 BUS_DMASYNC_POSTREAD); 3072 bus_dmamap_unload(sc->bge_cdata.bge_mtag_jumbo, 3073 sc->bge_cdata.bge_rx_jumbo_dmamap[rxidx]); 3074 m = sc->bge_cdata.bge_rx_jumbo_chain[rxidx]; 3075 sc->bge_cdata.bge_rx_jumbo_chain[rxidx] = NULL; 3076 jumbocnt++; 3077 if (cur_rx->bge_flags & BGE_RXBDFLAG_ERROR) { 3078 ifp->if_ierrors++; 3079 bge_newbuf_jumbo(sc, sc->bge_jumbo, m); 3080 continue; 3081 } 3082 if (bge_newbuf_jumbo(sc, 3083 sc->bge_jumbo, NULL) == ENOBUFS) { 3084 ifp->if_ierrors++; 3085 bge_newbuf_jumbo(sc, sc->bge_jumbo, m); 3086 continue; 3087 } 3088 } else { 3089 BGE_INC(sc->bge_std, BGE_STD_RX_RING_CNT); 3090 bus_dmamap_sync(sc->bge_cdata.bge_mtag, 3091 sc->bge_cdata.bge_rx_std_dmamap[rxidx], 3092 BUS_DMASYNC_POSTREAD); 3093 bus_dmamap_unload(sc->bge_cdata.bge_mtag, 3094 sc->bge_cdata.bge_rx_std_dmamap[rxidx]); 3095 m = sc->bge_cdata.bge_rx_std_chain[rxidx]; 3096 sc->bge_cdata.bge_rx_std_chain[rxidx] = NULL; 3097 stdcnt++; 3098 if (cur_rx->bge_flags & BGE_RXBDFLAG_ERROR) { 3099 ifp->if_ierrors++; 3100 bge_newbuf_std(sc, sc->bge_std, m); 3101 continue; 3102 } 3103 if (bge_newbuf_std(sc, sc->bge_std, 3104 NULL) == ENOBUFS) { 3105 ifp->if_ierrors++; 3106 bge_newbuf_std(sc, sc->bge_std, m); 3107 continue; 3108 } 3109 } 3110 3111 ifp->if_ipackets++; 3112 #ifndef __NO_STRICT_ALIGNMENT 3113 /* 3114 * For architectures with strict alignment we must make sure 3115 * the payload is aligned. 3116 */ 3117 if (sc->bge_flags & BGE_FLAG_RX_ALIGNBUG) { 3118 bcopy(m->m_data, m->m_data + ETHER_ALIGN, 3119 cur_rx->bge_len); 3120 m->m_data += ETHER_ALIGN; 3121 } 3122 #endif 3123 m->m_pkthdr.len = m->m_len = cur_rx->bge_len - ETHER_CRC_LEN; 3124 m->m_pkthdr.rcvif = ifp; 3125 3126 if (ifp->if_capenable & IFCAP_RXCSUM) { 3127 if (cur_rx->bge_flags & BGE_RXBDFLAG_IP_CSUM) { 3128 m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED; 3129 if ((cur_rx->bge_ip_csum ^ 0xFFFF) == 0) 3130 m->m_pkthdr.csum_flags |= CSUM_IP_VALID; 3131 } 3132 if (cur_rx->bge_flags & BGE_RXBDFLAG_TCP_UDP_CSUM && 3133 m->m_pkthdr.len >= ETHER_MIN_NOPAD) { 3134 m->m_pkthdr.csum_data = 3135 cur_rx->bge_tcp_udp_csum; 3136 m->m_pkthdr.csum_flags |= 3137 CSUM_DATA_VALID | CSUM_PSEUDO_HDR; 3138 } 3139 } 3140 3141 /* 3142 * If we received a packet with a vlan tag, 3143 * attach that information to the packet. 3144 */ 3145 if (have_tag) { 3146 #if __FreeBSD_version > 700022 3147 m->m_pkthdr.ether_vtag = vlan_tag; 3148 m->m_flags |= M_VLANTAG; 3149 #else 3150 VLAN_INPUT_TAG_NEW(ifp, m, vlan_tag); 3151 if (m == NULL) 3152 continue; 3153 #endif 3154 } 3155 3156 BGE_UNLOCK(sc); 3157 (*ifp->if_input)(ifp, m); 3158 BGE_LOCK(sc); 3159 } 3160 3161 if (stdcnt > 0) 3162 bus_dmamap_sync(sc->bge_cdata.bge_rx_std_ring_tag, 3163 sc->bge_cdata.bge_rx_std_ring_map, BUS_DMASYNC_PREWRITE); 3164 3165 if (BGE_IS_JUMBO_CAPABLE(sc) && jumbocnt > 0) 3166 bus_dmamap_sync(sc->bge_cdata.bge_rx_jumbo_ring_tag, 3167 sc->bge_cdata.bge_rx_jumbo_ring_map, BUS_DMASYNC_PREWRITE); 3168 3169 bge_writembx(sc, BGE_MBX_RX_CONS0_LO, sc->bge_rx_saved_considx); 3170 if (stdcnt) 3171 bge_writembx(sc, BGE_MBX_RX_STD_PROD_LO, sc->bge_std); 3172 if (jumbocnt) 3173 bge_writembx(sc, BGE_MBX_RX_JUMBO_PROD_LO, sc->bge_jumbo); 3174 #ifdef notyet 3175 /* 3176 * This register wraps very quickly under heavy packet drops. 3177 * If you need correct statistics, you can enable this check. 3178 */ 3179 if (BGE_IS_5705_PLUS(sc)) 3180 ifp->if_ierrors += CSR_READ_4(sc, BGE_RXLP_LOCSTAT_IFIN_DROPS); 3181 #endif 3182 } 3183 3184 static void 3185 bge_txeof(struct bge_softc *sc) 3186 { 3187 struct bge_tx_bd *cur_tx = NULL; 3188 struct ifnet *ifp; 3189 3190 BGE_LOCK_ASSERT(sc); 3191 3192 /* Nothing to do. */ 3193 if (sc->bge_tx_saved_considx == 3194 sc->bge_ldata.bge_status_block->bge_idx[0].bge_tx_cons_idx) 3195 return; 3196 3197 ifp = sc->bge_ifp; 3198 3199 bus_dmamap_sync(sc->bge_cdata.bge_tx_ring_tag, 3200 sc->bge_cdata.bge_tx_ring_map, 3201 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); 3202 /* 3203 * Go through our tx ring and free mbufs for those 3204 * frames that have been sent. 3205 */ 3206 while (sc->bge_tx_saved_considx != 3207 sc->bge_ldata.bge_status_block->bge_idx[0].bge_tx_cons_idx) { 3208 uint32_t idx = 0; 3209 3210 idx = sc->bge_tx_saved_considx; 3211 cur_tx = &sc->bge_ldata.bge_tx_ring[idx]; 3212 if (cur_tx->bge_flags & BGE_TXBDFLAG_END) 3213 ifp->if_opackets++; 3214 if (sc->bge_cdata.bge_tx_chain[idx] != NULL) { 3215 bus_dmamap_sync(sc->bge_cdata.bge_mtag, 3216 sc->bge_cdata.bge_tx_dmamap[idx], 3217 BUS_DMASYNC_POSTWRITE); 3218 bus_dmamap_unload(sc->bge_cdata.bge_mtag, 3219 sc->bge_cdata.bge_tx_dmamap[idx]); 3220 m_freem(sc->bge_cdata.bge_tx_chain[idx]); 3221 sc->bge_cdata.bge_tx_chain[idx] = NULL; 3222 } 3223 sc->bge_txcnt--; 3224 BGE_INC(sc->bge_tx_saved_considx, BGE_TX_RING_CNT); 3225 } 3226 3227 if (cur_tx != NULL) 3228 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 3229 if (sc->bge_txcnt == 0) 3230 sc->bge_timer = 0; 3231 } 3232 3233 #ifdef DEVICE_POLLING 3234 static void 3235 bge_poll(struct ifnet *ifp, enum poll_cmd cmd, int count) 3236 { 3237 struct bge_softc *sc = ifp->if_softc; 3238 uint32_t statusword; 3239 3240 BGE_LOCK(sc); 3241 if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) { 3242 BGE_UNLOCK(sc); 3243 return; 3244 } 3245 3246 bus_dmamap_sync(sc->bge_cdata.bge_status_tag, 3247 sc->bge_cdata.bge_status_map, BUS_DMASYNC_POSTREAD); 3248 3249 statusword = atomic_readandclear_32( 3250 &sc->bge_ldata.bge_status_block->bge_status); 3251 3252 bus_dmamap_sync(sc->bge_cdata.bge_status_tag, 3253 sc->bge_cdata.bge_status_map, BUS_DMASYNC_PREREAD); 3254 3255 /* Note link event. It will be processed by POLL_AND_CHECK_STATUS. */ 3256 if (statusword & BGE_STATFLAG_LINKSTATE_CHANGED) 3257 sc->bge_link_evt++; 3258 3259 if (cmd == POLL_AND_CHECK_STATUS) 3260 if ((sc->bge_asicrev == BGE_ASICREV_BCM5700 && 3261 sc->bge_chipid != BGE_CHIPID_BCM5700_B2) || 3262 sc->bge_link_evt || (sc->bge_flags & BGE_FLAG_TBI)) 3263 bge_link_upd(sc); 3264 3265 sc->rxcycles = count; 3266 bge_rxeof(sc); 3267 bge_txeof(sc); 3268 if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) 3269 bge_start_locked(ifp); 3270 3271 BGE_UNLOCK(sc); 3272 } 3273 #endif /* DEVICE_POLLING */ 3274 3275 static void 3276 bge_intr(void *xsc) 3277 { 3278 struct bge_softc *sc; 3279 struct ifnet *ifp; 3280 uint32_t statusword; 3281 3282 sc = xsc; 3283 3284 BGE_LOCK(sc); 3285 3286 ifp = sc->bge_ifp; 3287 3288 #ifdef DEVICE_POLLING 3289 if (ifp->if_capenable & IFCAP_POLLING) { 3290 BGE_UNLOCK(sc); 3291 return; 3292 } 3293 #endif 3294 3295 /* 3296 * Ack the interrupt by writing something to BGE_MBX_IRQ0_LO. Don't 3297 * disable interrupts by writing nonzero like we used to, since with 3298 * our current organization this just gives complications and 3299 * pessimizations for re-enabling interrupts. We used to have races 3300 * instead of the necessary complications. Disabling interrupts 3301 * would just reduce the chance of a status update while we are 3302 * running (by switching to the interrupt-mode coalescence 3303 * parameters), but this chance is already very low so it is more 3304 * efficient to get another interrupt than prevent it. 3305 * 3306 * We do the ack first to ensure another interrupt if there is a 3307 * status update after the ack. We don't check for the status 3308 * changing later because it is more efficient to get another 3309 * interrupt than prevent it, not quite as above (not checking is 3310 * a smaller optimization than not toggling the interrupt enable, 3311 * since checking doesn't involve PCI accesses and toggling require 3312 * the status check). So toggling would probably be a pessimization 3313 * even with MSI. It would only be needed for using a task queue. 3314 */ 3315 bge_writembx(sc, BGE_MBX_IRQ0_LO, 0); 3316 3317 /* 3318 * Do the mandatory PCI flush as well as get the link status. 3319 */ 3320 statusword = CSR_READ_4(sc, BGE_MAC_STS) & BGE_MACSTAT_LINK_CHANGED; 3321 3322 /* Make sure the descriptor ring indexes are coherent. */ 3323 bus_dmamap_sync(sc->bge_cdata.bge_status_tag, 3324 sc->bge_cdata.bge_status_map, BUS_DMASYNC_POSTREAD); 3325 bus_dmamap_sync(sc->bge_cdata.bge_status_tag, 3326 sc->bge_cdata.bge_status_map, BUS_DMASYNC_PREREAD); 3327 3328 if ((sc->bge_asicrev == BGE_ASICREV_BCM5700 && 3329 sc->bge_chipid != BGE_CHIPID_BCM5700_B2) || 3330 statusword || sc->bge_link_evt) 3331 bge_link_upd(sc); 3332 3333 if (ifp->if_drv_flags & IFF_DRV_RUNNING) { 3334 /* Check RX return ring producer/consumer. */ 3335 bge_rxeof(sc); 3336 3337 /* Check TX ring producer/consumer. */ 3338 bge_txeof(sc); 3339 } 3340 3341 if (ifp->if_drv_flags & IFF_DRV_RUNNING && 3342 !IFQ_DRV_IS_EMPTY(&ifp->if_snd)) 3343 bge_start_locked(ifp); 3344 3345 BGE_UNLOCK(sc); 3346 } 3347 3348 static void 3349 bge_asf_driver_up(struct bge_softc *sc) 3350 { 3351 if (sc->bge_asf_mode & ASF_STACKUP) { 3352 /* Send ASF heartbeat aprox. every 2s */ 3353 if (sc->bge_asf_count) 3354 sc->bge_asf_count --; 3355 else { 3356 sc->bge_asf_count = 5; 3357 bge_writemem_ind(sc, BGE_SOFTWARE_GENCOMM_FW, 3358 BGE_FW_DRV_ALIVE); 3359 bge_writemem_ind(sc, BGE_SOFTWARE_GENNCOMM_FW_LEN, 4); 3360 bge_writemem_ind(sc, BGE_SOFTWARE_GENNCOMM_FW_DATA, 3); 3361 CSR_WRITE_4(sc, BGE_CPU_EVENT, 3362 CSR_READ_4(sc, BGE_CPU_EVENT) | (1 << 14)); 3363 } 3364 } 3365 } 3366 3367 static void 3368 bge_tick(void *xsc) 3369 { 3370 struct bge_softc *sc = xsc; 3371 struct mii_data *mii = NULL; 3372 3373 BGE_LOCK_ASSERT(sc); 3374 3375 /* Synchronize with possible callout reset/stop. */ 3376 if (callout_pending(&sc->bge_stat_ch) || 3377 !callout_active(&sc->bge_stat_ch)) 3378 return; 3379 3380 if (BGE_IS_5705_PLUS(sc)) 3381 bge_stats_update_regs(sc); 3382 else 3383 bge_stats_update(sc); 3384 3385 if ((sc->bge_flags & BGE_FLAG_TBI) == 0) { 3386 mii = device_get_softc(sc->bge_miibus); 3387 /* 3388 * Do not touch PHY if we have link up. This could break 3389 * IPMI/ASF mode or produce extra input errors 3390 * (extra errors was reported for bcm5701 & bcm5704). 3391 */ 3392 if (!sc->bge_link) 3393 mii_tick(mii); 3394 } else { 3395 /* 3396 * Since in TBI mode auto-polling can't be used we should poll 3397 * link status manually. Here we register pending link event 3398 * and trigger interrupt. 3399 */ 3400 #ifdef DEVICE_POLLING 3401 /* In polling mode we poll link state in bge_poll(). */ 3402 if (!(sc->bge_ifp->if_capenable & IFCAP_POLLING)) 3403 #endif 3404 { 3405 sc->bge_link_evt++; 3406 if (sc->bge_asicrev == BGE_ASICREV_BCM5700 || 3407 sc->bge_flags & BGE_FLAG_5788) 3408 BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_INTR_SET); 3409 else 3410 BGE_SETBIT(sc, BGE_HCC_MODE, BGE_HCCMODE_COAL_NOW); 3411 } 3412 } 3413 3414 bge_asf_driver_up(sc); 3415 bge_watchdog(sc); 3416 3417 callout_reset(&sc->bge_stat_ch, hz, bge_tick, sc); 3418 } 3419 3420 static void 3421 bge_stats_update_regs(struct bge_softc *sc) 3422 { 3423 struct ifnet *ifp; 3424 3425 ifp = sc->bge_ifp; 3426 3427 ifp->if_collisions += CSR_READ_4(sc, BGE_MAC_STATS + 3428 offsetof(struct bge_mac_stats_regs, etherStatsCollisions)); 3429 3430 ifp->if_ierrors += CSR_READ_4(sc, BGE_RXLP_LOCSTAT_IFIN_DROPS); 3431 } 3432 3433 static void 3434 bge_stats_update(struct bge_softc *sc) 3435 { 3436 struct ifnet *ifp; 3437 bus_size_t stats; 3438 uint32_t cnt; /* current register value */ 3439 3440 ifp = sc->bge_ifp; 3441 3442 stats = BGE_MEMWIN_START + BGE_STATS_BLOCK; 3443 3444 #define READ_STAT(sc, stats, stat) \ 3445 CSR_READ_4(sc, stats + offsetof(struct bge_stats, stat)) 3446 3447 cnt = READ_STAT(sc, stats, txstats.etherStatsCollisions.bge_addr_lo); 3448 ifp->if_collisions += (uint32_t)(cnt - sc->bge_tx_collisions); 3449 sc->bge_tx_collisions = cnt; 3450 3451 cnt = READ_STAT(sc, stats, ifInDiscards.bge_addr_lo); 3452 ifp->if_ierrors += (uint32_t)(cnt - sc->bge_rx_discards); 3453 sc->bge_rx_discards = cnt; 3454 3455 cnt = READ_STAT(sc, stats, txstats.ifOutDiscards.bge_addr_lo); 3456 ifp->if_oerrors += (uint32_t)(cnt - sc->bge_tx_discards); 3457 sc->bge_tx_discards = cnt; 3458 3459 #undef READ_STAT 3460 } 3461 3462 /* 3463 * Pad outbound frame to ETHER_MIN_NOPAD for an unusual reason. 3464 * The bge hardware will pad out Tx runts to ETHER_MIN_NOPAD, 3465 * but when such padded frames employ the bge IP/TCP checksum offload, 3466 * the hardware checksum assist gives incorrect results (possibly 3467 * from incorporating its own padding into the UDP/TCP checksum; who knows). 3468 * If we pad such runts with zeros, the onboard checksum comes out correct. 3469 */ 3470 static __inline int 3471 bge_cksum_pad(struct mbuf *m) 3472 { 3473 int padlen = ETHER_MIN_NOPAD - m->m_pkthdr.len; 3474 struct mbuf *last; 3475 3476 /* If there's only the packet-header and we can pad there, use it. */ 3477 if (m->m_pkthdr.len == m->m_len && M_WRITABLE(m) && 3478 M_TRAILINGSPACE(m) >= padlen) { 3479 last = m; 3480 } else { 3481 /* 3482 * Walk packet chain to find last mbuf. We will either 3483 * pad there, or append a new mbuf and pad it. 3484 */ 3485 for (last = m; last->m_next != NULL; last = last->m_next); 3486 if (!(M_WRITABLE(last) && M_TRAILINGSPACE(last) >= padlen)) { 3487 /* Allocate new empty mbuf, pad it. Compact later. */ 3488 struct mbuf *n; 3489 3490 MGET(n, M_DONTWAIT, MT_DATA); 3491 if (n == NULL) 3492 return (ENOBUFS); 3493 n->m_len = 0; 3494 last->m_next = n; 3495 last = n; 3496 } 3497 } 3498 3499 /* Now zero the pad area, to avoid the bge cksum-assist bug. */ 3500 memset(mtod(last, caddr_t) + last->m_len, 0, padlen); 3501 last->m_len += padlen; 3502 m->m_pkthdr.len += padlen; 3503 3504 return (0); 3505 } 3506 3507 /* 3508 * Encapsulate an mbuf chain in the tx ring by coupling the mbuf data 3509 * pointers to descriptors. 3510 */ 3511 static int 3512 bge_encap(struct bge_softc *sc, struct mbuf **m_head, uint32_t *txidx) 3513 { 3514 bus_dma_segment_t segs[BGE_NSEG_NEW]; 3515 bus_dmamap_t map; 3516 struct bge_tx_bd *d; 3517 struct mbuf *m = *m_head; 3518 uint32_t idx = *txidx; 3519 uint16_t csum_flags; 3520 int nsegs, i, error; 3521 3522 csum_flags = 0; 3523 if (m->m_pkthdr.csum_flags) { 3524 if (m->m_pkthdr.csum_flags & CSUM_IP) 3525 csum_flags |= BGE_TXBDFLAG_IP_CSUM; 3526 if (m->m_pkthdr.csum_flags & (CSUM_TCP | CSUM_UDP)) { 3527 csum_flags |= BGE_TXBDFLAG_TCP_UDP_CSUM; 3528 if (m->m_pkthdr.len < ETHER_MIN_NOPAD && 3529 (error = bge_cksum_pad(m)) != 0) { 3530 m_freem(m); 3531 *m_head = NULL; 3532 return (error); 3533 } 3534 } 3535 if (m->m_flags & M_LASTFRAG) 3536 csum_flags |= BGE_TXBDFLAG_IP_FRAG_END; 3537 else if (m->m_flags & M_FRAG) 3538 csum_flags |= BGE_TXBDFLAG_IP_FRAG; 3539 } 3540 3541 map = sc->bge_cdata.bge_tx_dmamap[idx]; 3542 error = bus_dmamap_load_mbuf_sg(sc->bge_cdata.bge_mtag, map, m, segs, 3543 &nsegs, BUS_DMA_NOWAIT); 3544 if (error == EFBIG) { 3545 m = m_collapse(m, M_DONTWAIT, BGE_NSEG_NEW); 3546 if (m == NULL) { 3547 m_freem(*m_head); 3548 *m_head = NULL; 3549 return (ENOBUFS); 3550 } 3551 *m_head = m; 3552 error = bus_dmamap_load_mbuf_sg(sc->bge_cdata.bge_mtag, map, m, 3553 segs, &nsegs, BUS_DMA_NOWAIT); 3554 if (error) { 3555 m_freem(m); 3556 *m_head = NULL; 3557 return (error); 3558 } 3559 } else if (error != 0) 3560 return (error); 3561 3562 /* 3563 * Sanity check: avoid coming within 16 descriptors 3564 * of the end of the ring. 3565 */ 3566 if (nsegs > (BGE_TX_RING_CNT - sc->bge_txcnt - 16)) { 3567 bus_dmamap_unload(sc->bge_cdata.bge_mtag, map); 3568 return (ENOBUFS); 3569 } 3570 3571 bus_dmamap_sync(sc->bge_cdata.bge_mtag, map, BUS_DMASYNC_PREWRITE); 3572 3573 for (i = 0; ; i++) { 3574 d = &sc->bge_ldata.bge_tx_ring[idx]; 3575 d->bge_addr.bge_addr_lo = BGE_ADDR_LO(segs[i].ds_addr); 3576 d->bge_addr.bge_addr_hi = BGE_ADDR_HI(segs[i].ds_addr); 3577 d->bge_len = segs[i].ds_len; 3578 d->bge_flags = csum_flags; 3579 if (i == nsegs - 1) 3580 break; 3581 BGE_INC(idx, BGE_TX_RING_CNT); 3582 } 3583 3584 /* Mark the last segment as end of packet... */ 3585 d->bge_flags |= BGE_TXBDFLAG_END; 3586 3587 /* ... and put VLAN tag into first segment. */ 3588 d = &sc->bge_ldata.bge_tx_ring[*txidx]; 3589 #if __FreeBSD_version > 700022 3590 if (m->m_flags & M_VLANTAG) { 3591 d->bge_flags |= BGE_TXBDFLAG_VLAN_TAG; 3592 d->bge_vlan_tag = m->m_pkthdr.ether_vtag; 3593 } else 3594 d->bge_vlan_tag = 0; 3595 #else 3596 { 3597 struct m_tag *mtag; 3598 3599 if ((mtag = VLAN_OUTPUT_TAG(sc->bge_ifp, m)) != NULL) { 3600 d->bge_flags |= BGE_TXBDFLAG_VLAN_TAG; 3601 d->bge_vlan_tag = VLAN_TAG_VALUE(mtag); 3602 } else 3603 d->bge_vlan_tag = 0; 3604 } 3605 #endif 3606 3607 /* 3608 * Insure that the map for this transmission 3609 * is placed at the array index of the last descriptor 3610 * in this chain. 3611 */ 3612 sc->bge_cdata.bge_tx_dmamap[*txidx] = sc->bge_cdata.bge_tx_dmamap[idx]; 3613 sc->bge_cdata.bge_tx_dmamap[idx] = map; 3614 sc->bge_cdata.bge_tx_chain[idx] = m; 3615 sc->bge_txcnt += nsegs; 3616 3617 BGE_INC(idx, BGE_TX_RING_CNT); 3618 *txidx = idx; 3619 3620 return (0); 3621 } 3622 3623 /* 3624 * Main transmit routine. To avoid having to do mbuf copies, we put pointers 3625 * to the mbuf data regions directly in the transmit descriptors. 3626 */ 3627 static void 3628 bge_start_locked(struct ifnet *ifp) 3629 { 3630 struct bge_softc *sc; 3631 struct mbuf *m_head = NULL; 3632 uint32_t prodidx; 3633 int count = 0; 3634 3635 sc = ifp->if_softc; 3636 3637 if (!sc->bge_link || IFQ_DRV_IS_EMPTY(&ifp->if_snd)) 3638 return; 3639 3640 prodidx = sc->bge_tx_prodidx; 3641 3642 while(sc->bge_cdata.bge_tx_chain[prodidx] == NULL) { 3643 IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head); 3644 if (m_head == NULL) 3645 break; 3646 3647 /* 3648 * XXX 3649 * The code inside the if() block is never reached since we 3650 * must mark CSUM_IP_FRAGS in our if_hwassist to start getting 3651 * requests to checksum TCP/UDP in a fragmented packet. 3652 * 3653 * XXX 3654 * safety overkill. If this is a fragmented packet chain 3655 * with delayed TCP/UDP checksums, then only encapsulate 3656 * it if we have enough descriptors to handle the entire 3657 * chain at once. 3658 * (paranoia -- may not actually be needed) 3659 */ 3660 if (m_head->m_flags & M_FIRSTFRAG && 3661 m_head->m_pkthdr.csum_flags & (CSUM_DELAY_DATA)) { 3662 if ((BGE_TX_RING_CNT - sc->bge_txcnt) < 3663 m_head->m_pkthdr.csum_data + 16) { 3664 IFQ_DRV_PREPEND(&ifp->if_snd, m_head); 3665 ifp->if_drv_flags |= IFF_DRV_OACTIVE; 3666 break; 3667 } 3668 } 3669 3670 /* 3671 * Pack the data into the transmit ring. If we 3672 * don't have room, set the OACTIVE flag and wait 3673 * for the NIC to drain the ring. 3674 */ 3675 if (bge_encap(sc, &m_head, &prodidx)) { 3676 if (m_head == NULL) 3677 break; 3678 IFQ_DRV_PREPEND(&ifp->if_snd, m_head); 3679 ifp->if_drv_flags |= IFF_DRV_OACTIVE; 3680 break; 3681 } 3682 ++count; 3683 3684 /* 3685 * If there's a BPF listener, bounce a copy of this frame 3686 * to him. 3687 */ 3688 #ifdef ETHER_BPF_MTAP 3689 ETHER_BPF_MTAP(ifp, m_head); 3690 #else 3691 BPF_MTAP(ifp, m_head); 3692 #endif 3693 } 3694 3695 if (count == 0) 3696 /* No packets were dequeued. */ 3697 return; 3698 3699 /* Transmit. */ 3700 bge_writembx(sc, BGE_MBX_TX_HOST_PROD0_LO, prodidx); 3701 /* 5700 b2 errata */ 3702 if (sc->bge_chiprev == BGE_CHIPREV_5700_BX) 3703 bge_writembx(sc, BGE_MBX_TX_HOST_PROD0_LO, prodidx); 3704 3705 sc->bge_tx_prodidx = prodidx; 3706 3707 /* 3708 * Set a timeout in case the chip goes out to lunch. 3709 */ 3710 sc->bge_timer = 5; 3711 } 3712 3713 /* 3714 * Main transmit routine. To avoid having to do mbuf copies, we put pointers 3715 * to the mbuf data regions directly in the transmit descriptors. 3716 */ 3717 static void 3718 bge_start(struct ifnet *ifp) 3719 { 3720 struct bge_softc *sc; 3721 3722 sc = ifp->if_softc; 3723 BGE_LOCK(sc); 3724 bge_start_locked(ifp); 3725 BGE_UNLOCK(sc); 3726 } 3727 3728 static void 3729 bge_init_locked(struct bge_softc *sc) 3730 { 3731 struct ifnet *ifp; 3732 uint16_t *m; 3733 3734 BGE_LOCK_ASSERT(sc); 3735 3736 ifp = sc->bge_ifp; 3737 3738 if (ifp->if_drv_flags & IFF_DRV_RUNNING) 3739 return; 3740 3741 /* Cancel pending I/O and flush buffers. */ 3742 bge_stop(sc); 3743 3744 bge_stop_fw(sc); 3745 bge_sig_pre_reset(sc, BGE_RESET_START); 3746 bge_reset(sc); 3747 bge_sig_legacy(sc, BGE_RESET_START); 3748 bge_sig_post_reset(sc, BGE_RESET_START); 3749 3750 bge_chipinit(sc); 3751 3752 /* 3753 * Init the various state machines, ring 3754 * control blocks and firmware. 3755 */ 3756 if (bge_blockinit(sc)) { 3757 device_printf(sc->bge_dev, "initialization failure\n"); 3758 return; 3759 } 3760 3761 ifp = sc->bge_ifp; 3762 3763 /* Specify MTU. */ 3764 CSR_WRITE_4(sc, BGE_RX_MTU, ifp->if_mtu + 3765 ETHER_HDR_LEN + ETHER_CRC_LEN + 3766 (ifp->if_capenable & IFCAP_VLAN_MTU ? ETHER_VLAN_ENCAP_LEN : 0)); 3767 3768 /* Load our MAC address. */ 3769 m = (uint16_t *)IF_LLADDR(sc->bge_ifp); 3770 CSR_WRITE_4(sc, BGE_MAC_ADDR1_LO, htons(m[0])); 3771 CSR_WRITE_4(sc, BGE_MAC_ADDR1_HI, (htons(m[1]) << 16) | htons(m[2])); 3772 3773 /* Program promiscuous mode. */ 3774 bge_setpromisc(sc); 3775 3776 /* Program multicast filter. */ 3777 bge_setmulti(sc); 3778 3779 /* Program VLAN tag stripping. */ 3780 bge_setvlan(sc); 3781 3782 /* Init RX ring. */ 3783 bge_init_rx_ring_std(sc); 3784 3785 /* 3786 * Workaround for a bug in 5705 ASIC rev A0. Poll the NIC's 3787 * memory to insure that the chip has in fact read the first 3788 * entry of the ring. 3789 */ 3790 if (sc->bge_chipid == BGE_CHIPID_BCM5705_A0) { 3791 uint32_t v, i; 3792 for (i = 0; i < 10; i++) { 3793 DELAY(20); 3794 v = bge_readmem_ind(sc, BGE_STD_RX_RINGS + 8); 3795 if (v == (MCLBYTES - ETHER_ALIGN)) 3796 break; 3797 } 3798 if (i == 10) 3799 device_printf (sc->bge_dev, 3800 "5705 A0 chip failed to load RX ring\n"); 3801 } 3802 3803 /* Init jumbo RX ring. */ 3804 if (ifp->if_mtu > (ETHERMTU + ETHER_HDR_LEN + ETHER_CRC_LEN)) 3805 bge_init_rx_ring_jumbo(sc); 3806 3807 /* Init our RX return ring index. */ 3808 sc->bge_rx_saved_considx = 0; 3809 3810 /* Init our RX/TX stat counters. */ 3811 sc->bge_rx_discards = sc->bge_tx_discards = sc->bge_tx_collisions = 0; 3812 3813 /* Init TX ring. */ 3814 bge_init_tx_ring(sc); 3815 3816 /* Turn on transmitter. */ 3817 BGE_SETBIT(sc, BGE_TX_MODE, BGE_TXMODE_ENABLE); 3818 3819 /* Turn on receiver. */ 3820 BGE_SETBIT(sc, BGE_RX_MODE, BGE_RXMODE_ENABLE); 3821 3822 /* Tell firmware we're alive. */ 3823 BGE_SETBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP); 3824 3825 #ifdef DEVICE_POLLING 3826 /* Disable interrupts if we are polling. */ 3827 if (ifp->if_capenable & IFCAP_POLLING) { 3828 BGE_SETBIT(sc, BGE_PCI_MISC_CTL, 3829 BGE_PCIMISCCTL_MASK_PCI_INTR); 3830 bge_writembx(sc, BGE_MBX_IRQ0_LO, 1); 3831 } else 3832 #endif 3833 3834 /* Enable host interrupts. */ 3835 { 3836 BGE_SETBIT(sc, BGE_PCI_MISC_CTL, BGE_PCIMISCCTL_CLEAR_INTA); 3837 BGE_CLRBIT(sc, BGE_PCI_MISC_CTL, BGE_PCIMISCCTL_MASK_PCI_INTR); 3838 bge_writembx(sc, BGE_MBX_IRQ0_LO, 0); 3839 } 3840 3841 bge_ifmedia_upd_locked(ifp); 3842 3843 ifp->if_drv_flags |= IFF_DRV_RUNNING; 3844 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 3845 3846 callout_reset(&sc->bge_stat_ch, hz, bge_tick, sc); 3847 } 3848 3849 static void 3850 bge_init(void *xsc) 3851 { 3852 struct bge_softc *sc = xsc; 3853 3854 BGE_LOCK(sc); 3855 bge_init_locked(sc); 3856 BGE_UNLOCK(sc); 3857 } 3858 3859 /* 3860 * Set media options. 3861 */ 3862 static int 3863 bge_ifmedia_upd(struct ifnet *ifp) 3864 { 3865 struct bge_softc *sc = ifp->if_softc; 3866 int res; 3867 3868 BGE_LOCK(sc); 3869 res = bge_ifmedia_upd_locked(ifp); 3870 BGE_UNLOCK(sc); 3871 3872 return (res); 3873 } 3874 3875 static int 3876 bge_ifmedia_upd_locked(struct ifnet *ifp) 3877 { 3878 struct bge_softc *sc = ifp->if_softc; 3879 struct mii_data *mii; 3880 struct ifmedia *ifm; 3881 3882 BGE_LOCK_ASSERT(sc); 3883 3884 ifm = &sc->bge_ifmedia; 3885 3886 /* If this is a 1000baseX NIC, enable the TBI port. */ 3887 if (sc->bge_flags & BGE_FLAG_TBI) { 3888 if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER) 3889 return (EINVAL); 3890 switch(IFM_SUBTYPE(ifm->ifm_media)) { 3891 case IFM_AUTO: 3892 /* 3893 * The BCM5704 ASIC appears to have a special 3894 * mechanism for programming the autoneg 3895 * advertisement registers in TBI mode. 3896 */ 3897 if (sc->bge_asicrev == BGE_ASICREV_BCM5704) { 3898 uint32_t sgdig; 3899 sgdig = CSR_READ_4(sc, BGE_SGDIG_STS); 3900 if (sgdig & BGE_SGDIGSTS_DONE) { 3901 CSR_WRITE_4(sc, BGE_TX_TBI_AUTONEG, 0); 3902 sgdig = CSR_READ_4(sc, BGE_SGDIG_CFG); 3903 sgdig |= BGE_SGDIGCFG_AUTO | 3904 BGE_SGDIGCFG_PAUSE_CAP | 3905 BGE_SGDIGCFG_ASYM_PAUSE; 3906 CSR_WRITE_4(sc, BGE_SGDIG_CFG, 3907 sgdig | BGE_SGDIGCFG_SEND); 3908 DELAY(5); 3909 CSR_WRITE_4(sc, BGE_SGDIG_CFG, sgdig); 3910 } 3911 } 3912 break; 3913 case IFM_1000_SX: 3914 if ((ifm->ifm_media & IFM_GMASK) == IFM_FDX) { 3915 BGE_CLRBIT(sc, BGE_MAC_MODE, 3916 BGE_MACMODE_HALF_DUPLEX); 3917 } else { 3918 BGE_SETBIT(sc, BGE_MAC_MODE, 3919 BGE_MACMODE_HALF_DUPLEX); 3920 } 3921 break; 3922 default: 3923 return (EINVAL); 3924 } 3925 return (0); 3926 } 3927 3928 sc->bge_link_evt++; 3929 mii = device_get_softc(sc->bge_miibus); 3930 if (mii->mii_instance) { 3931 struct mii_softc *miisc; 3932 for (miisc = LIST_FIRST(&mii->mii_phys); miisc != NULL; 3933 miisc = LIST_NEXT(miisc, mii_list)) 3934 mii_phy_reset(miisc); 3935 } 3936 mii_mediachg(mii); 3937 3938 /* 3939 * Force an interrupt so that we will call bge_link_upd 3940 * if needed and clear any pending link state attention. 3941 * Without this we are not getting any further interrupts 3942 * for link state changes and thus will not UP the link and 3943 * not be able to send in bge_start_locked. The only 3944 * way to get things working was to receive a packet and 3945 * get an RX intr. 3946 * bge_tick should help for fiber cards and we might not 3947 * need to do this here if BGE_FLAG_TBI is set but as 3948 * we poll for fiber anyway it should not harm. 3949 */ 3950 if (sc->bge_asicrev == BGE_ASICREV_BCM5700 || 3951 sc->bge_flags & BGE_FLAG_5788) 3952 BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_INTR_SET); 3953 else 3954 BGE_SETBIT(sc, BGE_HCC_MODE, BGE_HCCMODE_COAL_NOW); 3955 3956 return (0); 3957 } 3958 3959 /* 3960 * Report current media status. 3961 */ 3962 static void 3963 bge_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr) 3964 { 3965 struct bge_softc *sc = ifp->if_softc; 3966 struct mii_data *mii; 3967 3968 BGE_LOCK(sc); 3969 3970 if (sc->bge_flags & BGE_FLAG_TBI) { 3971 ifmr->ifm_status = IFM_AVALID; 3972 ifmr->ifm_active = IFM_ETHER; 3973 if (CSR_READ_4(sc, BGE_MAC_STS) & 3974 BGE_MACSTAT_TBI_PCS_SYNCHED) 3975 ifmr->ifm_status |= IFM_ACTIVE; 3976 else { 3977 ifmr->ifm_active |= IFM_NONE; 3978 BGE_UNLOCK(sc); 3979 return; 3980 } 3981 ifmr->ifm_active |= IFM_1000_SX; 3982 if (CSR_READ_4(sc, BGE_MAC_MODE) & BGE_MACMODE_HALF_DUPLEX) 3983 ifmr->ifm_active |= IFM_HDX; 3984 else 3985 ifmr->ifm_active |= IFM_FDX; 3986 BGE_UNLOCK(sc); 3987 return; 3988 } 3989 3990 mii = device_get_softc(sc->bge_miibus); 3991 mii_pollstat(mii); 3992 ifmr->ifm_active = mii->mii_media_active; 3993 ifmr->ifm_status = mii->mii_media_status; 3994 3995 BGE_UNLOCK(sc); 3996 } 3997 3998 static int 3999 bge_ioctl(struct ifnet *ifp, u_long command, caddr_t data) 4000 { 4001 struct bge_softc *sc = ifp->if_softc; 4002 struct ifreq *ifr = (struct ifreq *) data; 4003 struct mii_data *mii; 4004 int flags, mask, error = 0; 4005 4006 switch (command) { 4007 case SIOCSIFMTU: 4008 if (ifr->ifr_mtu < ETHERMIN || 4009 ((BGE_IS_JUMBO_CAPABLE(sc)) && 4010 ifr->ifr_mtu > BGE_JUMBO_MTU) || 4011 ((!BGE_IS_JUMBO_CAPABLE(sc)) && 4012 ifr->ifr_mtu > ETHERMTU)) 4013 error = EINVAL; 4014 else if (ifp->if_mtu != ifr->ifr_mtu) { 4015 ifp->if_mtu = ifr->ifr_mtu; 4016 ifp->if_drv_flags &= ~IFF_DRV_RUNNING; 4017 bge_init(sc); 4018 } 4019 break; 4020 case SIOCSIFFLAGS: 4021 BGE_LOCK(sc); 4022 if (ifp->if_flags & IFF_UP) { 4023 /* 4024 * If only the state of the PROMISC flag changed, 4025 * then just use the 'set promisc mode' command 4026 * instead of reinitializing the entire NIC. Doing 4027 * a full re-init means reloading the firmware and 4028 * waiting for it to start up, which may take a 4029 * second or two. Similarly for ALLMULTI. 4030 */ 4031 if (ifp->if_drv_flags & IFF_DRV_RUNNING) { 4032 flags = ifp->if_flags ^ sc->bge_if_flags; 4033 if (flags & IFF_PROMISC) 4034 bge_setpromisc(sc); 4035 if (flags & IFF_ALLMULTI) 4036 bge_setmulti(sc); 4037 } else 4038 bge_init_locked(sc); 4039 } else { 4040 if (ifp->if_drv_flags & IFF_DRV_RUNNING) { 4041 bge_stop(sc); 4042 } 4043 } 4044 sc->bge_if_flags = ifp->if_flags; 4045 BGE_UNLOCK(sc); 4046 error = 0; 4047 break; 4048 case SIOCADDMULTI: 4049 case SIOCDELMULTI: 4050 if (ifp->if_drv_flags & IFF_DRV_RUNNING) { 4051 BGE_LOCK(sc); 4052 bge_setmulti(sc); 4053 BGE_UNLOCK(sc); 4054 error = 0; 4055 } 4056 break; 4057 case SIOCSIFMEDIA: 4058 case SIOCGIFMEDIA: 4059 if (sc->bge_flags & BGE_FLAG_TBI) { 4060 error = ifmedia_ioctl(ifp, ifr, 4061 &sc->bge_ifmedia, command); 4062 } else { 4063 mii = device_get_softc(sc->bge_miibus); 4064 error = ifmedia_ioctl(ifp, ifr, 4065 &mii->mii_media, command); 4066 } 4067 break; 4068 case SIOCSIFCAP: 4069 mask = ifr->ifr_reqcap ^ ifp->if_capenable; 4070 #ifdef DEVICE_POLLING 4071 if (mask & IFCAP_POLLING) { 4072 if (ifr->ifr_reqcap & IFCAP_POLLING) { 4073 error = ether_poll_register(bge_poll, ifp); 4074 if (error) 4075 return (error); 4076 BGE_LOCK(sc); 4077 BGE_SETBIT(sc, BGE_PCI_MISC_CTL, 4078 BGE_PCIMISCCTL_MASK_PCI_INTR); 4079 bge_writembx(sc, BGE_MBX_IRQ0_LO, 1); 4080 ifp->if_capenable |= IFCAP_POLLING; 4081 BGE_UNLOCK(sc); 4082 } else { 4083 error = ether_poll_deregister(ifp); 4084 /* Enable interrupt even in error case */ 4085 BGE_LOCK(sc); 4086 BGE_CLRBIT(sc, BGE_PCI_MISC_CTL, 4087 BGE_PCIMISCCTL_MASK_PCI_INTR); 4088 bge_writembx(sc, BGE_MBX_IRQ0_LO, 0); 4089 ifp->if_capenable &= ~IFCAP_POLLING; 4090 BGE_UNLOCK(sc); 4091 } 4092 } 4093 #endif 4094 if (mask & IFCAP_HWCSUM) { 4095 ifp->if_capenable ^= IFCAP_HWCSUM; 4096 if (IFCAP_HWCSUM & ifp->if_capenable && 4097 IFCAP_HWCSUM & ifp->if_capabilities) 4098 ifp->if_hwassist = BGE_CSUM_FEATURES; 4099 else 4100 ifp->if_hwassist = 0; 4101 #ifdef VLAN_CAPABILITIES 4102 VLAN_CAPABILITIES(ifp); 4103 #endif 4104 } 4105 4106 if (mask & IFCAP_VLAN_MTU) { 4107 ifp->if_capenable ^= IFCAP_VLAN_MTU; 4108 ifp->if_drv_flags &= ~IFF_DRV_RUNNING; 4109 bge_init(sc); 4110 } 4111 4112 if (mask & IFCAP_VLAN_HWTAGGING) { 4113 ifp->if_capenable ^= IFCAP_VLAN_HWTAGGING; 4114 BGE_LOCK(sc); 4115 bge_setvlan(sc); 4116 BGE_UNLOCK(sc); 4117 #ifdef VLAN_CAPABILITIES 4118 VLAN_CAPABILITIES(ifp); 4119 #endif 4120 } 4121 4122 break; 4123 default: 4124 error = ether_ioctl(ifp, command, data); 4125 break; 4126 } 4127 4128 return (error); 4129 } 4130 4131 static void 4132 bge_watchdog(struct bge_softc *sc) 4133 { 4134 struct ifnet *ifp; 4135 4136 BGE_LOCK_ASSERT(sc); 4137 4138 if (sc->bge_timer == 0 || --sc->bge_timer) 4139 return; 4140 4141 ifp = sc->bge_ifp; 4142 4143 if_printf(ifp, "watchdog timeout -- resetting\n"); 4144 4145 ifp->if_drv_flags &= ~IFF_DRV_RUNNING; 4146 bge_init_locked(sc); 4147 4148 ifp->if_oerrors++; 4149 } 4150 4151 /* 4152 * Stop the adapter and free any mbufs allocated to the 4153 * RX and TX lists. 4154 */ 4155 static void 4156 bge_stop(struct bge_softc *sc) 4157 { 4158 struct ifnet *ifp; 4159 struct ifmedia_entry *ifm; 4160 struct mii_data *mii = NULL; 4161 int mtmp, itmp; 4162 4163 BGE_LOCK_ASSERT(sc); 4164 4165 ifp = sc->bge_ifp; 4166 4167 if ((sc->bge_flags & BGE_FLAG_TBI) == 0) 4168 mii = device_get_softc(sc->bge_miibus); 4169 4170 callout_stop(&sc->bge_stat_ch); 4171 4172 /* 4173 * Disable all of the receiver blocks. 4174 */ 4175 BGE_CLRBIT(sc, BGE_RX_MODE, BGE_RXMODE_ENABLE); 4176 BGE_CLRBIT(sc, BGE_RBDI_MODE, BGE_RBDIMODE_ENABLE); 4177 BGE_CLRBIT(sc, BGE_RXLP_MODE, BGE_RXLPMODE_ENABLE); 4178 if (!(BGE_IS_5705_PLUS(sc))) 4179 BGE_CLRBIT(sc, BGE_RXLS_MODE, BGE_RXLSMODE_ENABLE); 4180 BGE_CLRBIT(sc, BGE_RDBDI_MODE, BGE_RBDIMODE_ENABLE); 4181 BGE_CLRBIT(sc, BGE_RDC_MODE, BGE_RDCMODE_ENABLE); 4182 BGE_CLRBIT(sc, BGE_RBDC_MODE, BGE_RBDCMODE_ENABLE); 4183 4184 /* 4185 * Disable all of the transmit blocks. 4186 */ 4187 BGE_CLRBIT(sc, BGE_SRS_MODE, BGE_SRSMODE_ENABLE); 4188 BGE_CLRBIT(sc, BGE_SBDI_MODE, BGE_SBDIMODE_ENABLE); 4189 BGE_CLRBIT(sc, BGE_SDI_MODE, BGE_SDIMODE_ENABLE); 4190 BGE_CLRBIT(sc, BGE_RDMA_MODE, BGE_RDMAMODE_ENABLE); 4191 BGE_CLRBIT(sc, BGE_SDC_MODE, BGE_SDCMODE_ENABLE); 4192 if (!(BGE_IS_5705_PLUS(sc))) 4193 BGE_CLRBIT(sc, BGE_DMAC_MODE, BGE_DMACMODE_ENABLE); 4194 BGE_CLRBIT(sc, BGE_SBDC_MODE, BGE_SBDCMODE_ENABLE); 4195 4196 /* 4197 * Shut down all of the memory managers and related 4198 * state machines. 4199 */ 4200 BGE_CLRBIT(sc, BGE_HCC_MODE, BGE_HCCMODE_ENABLE); 4201 BGE_CLRBIT(sc, BGE_WDMA_MODE, BGE_WDMAMODE_ENABLE); 4202 if (!(BGE_IS_5705_PLUS(sc))) 4203 BGE_CLRBIT(sc, BGE_MBCF_MODE, BGE_MBCFMODE_ENABLE); 4204 CSR_WRITE_4(sc, BGE_FTQ_RESET, 0xFFFFFFFF); 4205 CSR_WRITE_4(sc, BGE_FTQ_RESET, 0); 4206 if (!(BGE_IS_5705_PLUS(sc))) { 4207 BGE_CLRBIT(sc, BGE_BMAN_MODE, BGE_BMANMODE_ENABLE); 4208 BGE_CLRBIT(sc, BGE_MARB_MODE, BGE_MARBMODE_ENABLE); 4209 } 4210 4211 /* Disable host interrupts. */ 4212 BGE_SETBIT(sc, BGE_PCI_MISC_CTL, BGE_PCIMISCCTL_MASK_PCI_INTR); 4213 bge_writembx(sc, BGE_MBX_IRQ0_LO, 1); 4214 4215 /* 4216 * Tell firmware we're shutting down. 4217 */ 4218 4219 bge_stop_fw(sc); 4220 bge_sig_pre_reset(sc, BGE_RESET_STOP); 4221 bge_reset(sc); 4222 bge_sig_legacy(sc, BGE_RESET_STOP); 4223 bge_sig_post_reset(sc, BGE_RESET_STOP); 4224 4225 /* 4226 * Keep the ASF firmware running if up. 4227 */ 4228 if (sc->bge_asf_mode & ASF_STACKUP) 4229 BGE_SETBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP); 4230 else 4231 BGE_CLRBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP); 4232 4233 /* Free the RX lists. */ 4234 bge_free_rx_ring_std(sc); 4235 4236 /* Free jumbo RX list. */ 4237 if (BGE_IS_JUMBO_CAPABLE(sc)) 4238 bge_free_rx_ring_jumbo(sc); 4239 4240 /* Free TX buffers. */ 4241 bge_free_tx_ring(sc); 4242 4243 /* 4244 * Isolate/power down the PHY, but leave the media selection 4245 * unchanged so that things will be put back to normal when 4246 * we bring the interface back up. 4247 */ 4248 if ((sc->bge_flags & BGE_FLAG_TBI) == 0) { 4249 itmp = ifp->if_flags; 4250 ifp->if_flags |= IFF_UP; 4251 /* 4252 * If we are called from bge_detach(), mii is already NULL. 4253 */ 4254 if (mii != NULL) { 4255 ifm = mii->mii_media.ifm_cur; 4256 mtmp = ifm->ifm_media; 4257 ifm->ifm_media = IFM_ETHER | IFM_NONE; 4258 mii_mediachg(mii); 4259 ifm->ifm_media = mtmp; 4260 } 4261 ifp->if_flags = itmp; 4262 } 4263 4264 sc->bge_tx_saved_considx = BGE_TXCONS_UNSET; 4265 4266 /* Clear MAC's link state (PHY may still have link UP). */ 4267 if (bootverbose && sc->bge_link) 4268 if_printf(sc->bge_ifp, "link DOWN\n"); 4269 sc->bge_link = 0; 4270 4271 ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE); 4272 } 4273 4274 /* 4275 * Stop all chip I/O so that the kernel's probe routines don't 4276 * get confused by errant DMAs when rebooting. 4277 */ 4278 static void 4279 bge_shutdown(device_t dev) 4280 { 4281 struct bge_softc *sc; 4282 4283 sc = device_get_softc(dev); 4284 4285 BGE_LOCK(sc); 4286 bge_stop(sc); 4287 bge_reset(sc); 4288 BGE_UNLOCK(sc); 4289 } 4290 4291 static int 4292 bge_suspend(device_t dev) 4293 { 4294 struct bge_softc *sc; 4295 4296 sc = device_get_softc(dev); 4297 BGE_LOCK(sc); 4298 bge_stop(sc); 4299 BGE_UNLOCK(sc); 4300 4301 return (0); 4302 } 4303 4304 static int 4305 bge_resume(device_t dev) 4306 { 4307 struct bge_softc *sc; 4308 struct ifnet *ifp; 4309 4310 sc = device_get_softc(dev); 4311 BGE_LOCK(sc); 4312 ifp = sc->bge_ifp; 4313 if (ifp->if_flags & IFF_UP) { 4314 bge_init_locked(sc); 4315 if (ifp->if_drv_flags & IFF_DRV_RUNNING) 4316 bge_start_locked(ifp); 4317 } 4318 BGE_UNLOCK(sc); 4319 4320 return (0); 4321 } 4322 4323 static void 4324 bge_link_upd(struct bge_softc *sc) 4325 { 4326 struct mii_data *mii; 4327 uint32_t link, status; 4328 4329 BGE_LOCK_ASSERT(sc); 4330 4331 /* Clear 'pending link event' flag. */ 4332 sc->bge_link_evt = 0; 4333 4334 /* 4335 * Process link state changes. 4336 * Grrr. The link status word in the status block does 4337 * not work correctly on the BCM5700 rev AX and BX chips, 4338 * according to all available information. Hence, we have 4339 * to enable MII interrupts in order to properly obtain 4340 * async link changes. Unfortunately, this also means that 4341 * we have to read the MAC status register to detect link 4342 * changes, thereby adding an additional register access to 4343 * the interrupt handler. 4344 * 4345 * XXX: perhaps link state detection procedure used for 4346 * BGE_CHIPID_BCM5700_B2 can be used for others BCM5700 revisions. 4347 */ 4348 4349 if (sc->bge_asicrev == BGE_ASICREV_BCM5700 && 4350 sc->bge_chipid != BGE_CHIPID_BCM5700_B2) { 4351 status = CSR_READ_4(sc, BGE_MAC_STS); 4352 if (status & BGE_MACSTAT_MI_INTERRUPT) { 4353 mii = device_get_softc(sc->bge_miibus); 4354 mii_pollstat(mii); 4355 if (!sc->bge_link && 4356 mii->mii_media_status & IFM_ACTIVE && 4357 IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) { 4358 sc->bge_link++; 4359 if (bootverbose) 4360 if_printf(sc->bge_ifp, "link UP\n"); 4361 } else if (sc->bge_link && 4362 (!(mii->mii_media_status & IFM_ACTIVE) || 4363 IFM_SUBTYPE(mii->mii_media_active) == IFM_NONE)) { 4364 sc->bge_link = 0; 4365 if (bootverbose) 4366 if_printf(sc->bge_ifp, "link DOWN\n"); 4367 } 4368 4369 /* Clear the interrupt. */ 4370 CSR_WRITE_4(sc, BGE_MAC_EVT_ENB, 4371 BGE_EVTENB_MI_INTERRUPT); 4372 bge_miibus_readreg(sc->bge_dev, 1, BRGPHY_MII_ISR); 4373 bge_miibus_writereg(sc->bge_dev, 1, BRGPHY_MII_IMR, 4374 BRGPHY_INTRS); 4375 } 4376 return; 4377 } 4378 4379 if (sc->bge_flags & BGE_FLAG_TBI) { 4380 status = CSR_READ_4(sc, BGE_MAC_STS); 4381 if (status & BGE_MACSTAT_TBI_PCS_SYNCHED) { 4382 if (!sc->bge_link) { 4383 sc->bge_link++; 4384 if (sc->bge_asicrev == BGE_ASICREV_BCM5704) 4385 BGE_CLRBIT(sc, BGE_MAC_MODE, 4386 BGE_MACMODE_TBI_SEND_CFGS); 4387 CSR_WRITE_4(sc, BGE_MAC_STS, 0xFFFFFFFF); 4388 if (bootverbose) 4389 if_printf(sc->bge_ifp, "link UP\n"); 4390 if_link_state_change(sc->bge_ifp, 4391 LINK_STATE_UP); 4392 } 4393 } else if (sc->bge_link) { 4394 sc->bge_link = 0; 4395 if (bootverbose) 4396 if_printf(sc->bge_ifp, "link DOWN\n"); 4397 if_link_state_change(sc->bge_ifp, LINK_STATE_DOWN); 4398 } 4399 } else if (CSR_READ_4(sc, BGE_MI_MODE) & BGE_MIMODE_AUTOPOLL) { 4400 /* 4401 * Some broken BCM chips have BGE_STATFLAG_LINKSTATE_CHANGED bit 4402 * in status word always set. Workaround this bug by reading 4403 * PHY link status directly. 4404 */ 4405 link = (CSR_READ_4(sc, BGE_MI_STS) & BGE_MISTS_LINK) ? 1 : 0; 4406 4407 if (link != sc->bge_link || 4408 sc->bge_asicrev == BGE_ASICREV_BCM5700) { 4409 mii = device_get_softc(sc->bge_miibus); 4410 mii_pollstat(mii); 4411 if (!sc->bge_link && 4412 mii->mii_media_status & IFM_ACTIVE && 4413 IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) { 4414 sc->bge_link++; 4415 if (bootverbose) 4416 if_printf(sc->bge_ifp, "link UP\n"); 4417 } else if (sc->bge_link && 4418 (!(mii->mii_media_status & IFM_ACTIVE) || 4419 IFM_SUBTYPE(mii->mii_media_active) == IFM_NONE)) { 4420 sc->bge_link = 0; 4421 if (bootverbose) 4422 if_printf(sc->bge_ifp, "link DOWN\n"); 4423 } 4424 } 4425 } else { 4426 /* 4427 * Discard link events for MII/GMII controllers 4428 * if MI auto-polling is disabled. 4429 */ 4430 } 4431 4432 /* Clear the attention. */ 4433 CSR_WRITE_4(sc, BGE_MAC_STS, BGE_MACSTAT_SYNC_CHANGED | 4434 BGE_MACSTAT_CFG_CHANGED | BGE_MACSTAT_MI_COMPLETE | 4435 BGE_MACSTAT_LINK_CHANGED); 4436 } 4437 4438 #define BGE_SYSCTL_STAT(sc, ctx, desc, parent, node, oid) \ 4439 SYSCTL_ADD_PROC(ctx, parent, OID_AUTO, oid, CTLTYPE_UINT|CTLFLAG_RD, \ 4440 sc, offsetof(struct bge_stats, node), bge_sysctl_stats, "IU", \ 4441 desc) 4442 4443 static void 4444 bge_add_sysctls(struct bge_softc *sc) 4445 { 4446 struct sysctl_ctx_list *ctx; 4447 struct sysctl_oid_list *children, *schildren; 4448 struct sysctl_oid *tree; 4449 4450 ctx = device_get_sysctl_ctx(sc->bge_dev); 4451 children = SYSCTL_CHILDREN(device_get_sysctl_tree(sc->bge_dev)); 4452 4453 #ifdef BGE_REGISTER_DEBUG 4454 SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "debug_info", 4455 CTLTYPE_INT | CTLFLAG_RW, sc, 0, bge_sysctl_debug_info, "I", 4456 "Debug Information"); 4457 4458 SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "reg_read", 4459 CTLTYPE_INT | CTLFLAG_RW, sc, 0, bge_sysctl_reg_read, "I", 4460 "Register Read"); 4461 4462 SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "mem_read", 4463 CTLTYPE_INT | CTLFLAG_RW, sc, 0, bge_sysctl_mem_read, "I", 4464 "Memory Read"); 4465 4466 #endif 4467 4468 if (BGE_IS_5705_PLUS(sc)) 4469 return; 4470 4471 tree = SYSCTL_ADD_NODE(ctx, children, OID_AUTO, "stats", CTLFLAG_RD, 4472 NULL, "BGE Statistics"); 4473 schildren = children = SYSCTL_CHILDREN(tree); 4474 BGE_SYSCTL_STAT(sc, ctx, "Frames Dropped Due To Filters", 4475 children, COSFramesDroppedDueToFilters, 4476 "FramesDroppedDueToFilters"); 4477 BGE_SYSCTL_STAT(sc, ctx, "NIC DMA Write Queue Full", 4478 children, nicDmaWriteQueueFull, "DmaWriteQueueFull"); 4479 BGE_SYSCTL_STAT(sc, ctx, "NIC DMA Write High Priority Queue Full", 4480 children, nicDmaWriteHighPriQueueFull, "DmaWriteHighPriQueueFull"); 4481 BGE_SYSCTL_STAT(sc, ctx, "NIC No More RX Buffer Descriptors", 4482 children, nicNoMoreRxBDs, "NoMoreRxBDs"); 4483 BGE_SYSCTL_STAT(sc, ctx, "Discarded Input Frames", 4484 children, ifInDiscards, "InputDiscards"); 4485 BGE_SYSCTL_STAT(sc, ctx, "Input Errors", 4486 children, ifInErrors, "InputErrors"); 4487 BGE_SYSCTL_STAT(sc, ctx, "NIC Recv Threshold Hit", 4488 children, nicRecvThresholdHit, "RecvThresholdHit"); 4489 BGE_SYSCTL_STAT(sc, ctx, "NIC DMA Read Queue Full", 4490 children, nicDmaReadQueueFull, "DmaReadQueueFull"); 4491 BGE_SYSCTL_STAT(sc, ctx, "NIC DMA Read High Priority Queue Full", 4492 children, nicDmaReadHighPriQueueFull, "DmaReadHighPriQueueFull"); 4493 BGE_SYSCTL_STAT(sc, ctx, "NIC Send Data Complete Queue Full", 4494 children, nicSendDataCompQueueFull, "SendDataCompQueueFull"); 4495 BGE_SYSCTL_STAT(sc, ctx, "NIC Ring Set Send Producer Index", 4496 children, nicRingSetSendProdIndex, "RingSetSendProdIndex"); 4497 BGE_SYSCTL_STAT(sc, ctx, "NIC Ring Status Update", 4498 children, nicRingStatusUpdate, "RingStatusUpdate"); 4499 BGE_SYSCTL_STAT(sc, ctx, "NIC Interrupts", 4500 children, nicInterrupts, "Interrupts"); 4501 BGE_SYSCTL_STAT(sc, ctx, "NIC Avoided Interrupts", 4502 children, nicAvoidedInterrupts, "AvoidedInterrupts"); 4503 BGE_SYSCTL_STAT(sc, ctx, "NIC Send Threshold Hit", 4504 children, nicSendThresholdHit, "SendThresholdHit"); 4505 4506 tree = SYSCTL_ADD_NODE(ctx, schildren, OID_AUTO, "rx", CTLFLAG_RD, 4507 NULL, "BGE RX Statistics"); 4508 children = SYSCTL_CHILDREN(tree); 4509 BGE_SYSCTL_STAT(sc, ctx, "Inbound Octets", 4510 children, rxstats.ifHCInOctets, "Octets"); 4511 BGE_SYSCTL_STAT(sc, ctx, "Fragments", 4512 children, rxstats.etherStatsFragments, "Fragments"); 4513 BGE_SYSCTL_STAT(sc, ctx, "Inbound Unicast Packets", 4514 children, rxstats.ifHCInUcastPkts, "UcastPkts"); 4515 BGE_SYSCTL_STAT(sc, ctx, "Inbound Multicast Packets", 4516 children, rxstats.ifHCInMulticastPkts, "MulticastPkts"); 4517 BGE_SYSCTL_STAT(sc, ctx, "FCS Errors", 4518 children, rxstats.dot3StatsFCSErrors, "FCSErrors"); 4519 BGE_SYSCTL_STAT(sc, ctx, "Alignment Errors", 4520 children, rxstats.dot3StatsAlignmentErrors, "AlignmentErrors"); 4521 BGE_SYSCTL_STAT(sc, ctx, "XON Pause Frames Received", 4522 children, rxstats.xonPauseFramesReceived, "xonPauseFramesReceived"); 4523 BGE_SYSCTL_STAT(sc, ctx, "XOFF Pause Frames Received", 4524 children, rxstats.xoffPauseFramesReceived, 4525 "xoffPauseFramesReceived"); 4526 BGE_SYSCTL_STAT(sc, ctx, "MAC Control Frames Received", 4527 children, rxstats.macControlFramesReceived, 4528 "ControlFramesReceived"); 4529 BGE_SYSCTL_STAT(sc, ctx, "XOFF State Entered", 4530 children, rxstats.xoffStateEntered, "xoffStateEntered"); 4531 BGE_SYSCTL_STAT(sc, ctx, "Frames Too Long", 4532 children, rxstats.dot3StatsFramesTooLong, "FramesTooLong"); 4533 BGE_SYSCTL_STAT(sc, ctx, "Jabbers", 4534 children, rxstats.etherStatsJabbers, "Jabbers"); 4535 BGE_SYSCTL_STAT(sc, ctx, "Undersized Packets", 4536 children, rxstats.etherStatsUndersizePkts, "UndersizePkts"); 4537 BGE_SYSCTL_STAT(sc, ctx, "Inbound Range Length Errors", 4538 children, rxstats.inRangeLengthError, "inRangeLengthError"); 4539 BGE_SYSCTL_STAT(sc, ctx, "Outbound Range Length Errors", 4540 children, rxstats.outRangeLengthError, "outRangeLengthError"); 4541 4542 tree = SYSCTL_ADD_NODE(ctx, schildren, OID_AUTO, "tx", CTLFLAG_RD, 4543 NULL, "BGE TX Statistics"); 4544 children = SYSCTL_CHILDREN(tree); 4545 BGE_SYSCTL_STAT(sc, ctx, "Outbound Octets", 4546 children, txstats.ifHCOutOctets, "Octets"); 4547 BGE_SYSCTL_STAT(sc, ctx, "TX Collisions", 4548 children, txstats.etherStatsCollisions, "Collisions"); 4549 BGE_SYSCTL_STAT(sc, ctx, "XON Sent", 4550 children, txstats.outXonSent, "XonSent"); 4551 BGE_SYSCTL_STAT(sc, ctx, "XOFF Sent", 4552 children, txstats.outXoffSent, "XoffSent"); 4553 BGE_SYSCTL_STAT(sc, ctx, "Flow Control Done", 4554 children, txstats.flowControlDone, "flowControlDone"); 4555 BGE_SYSCTL_STAT(sc, ctx, "Internal MAC TX errors", 4556 children, txstats.dot3StatsInternalMacTransmitErrors, 4557 "InternalMacTransmitErrors"); 4558 BGE_SYSCTL_STAT(sc, ctx, "Single Collision Frames", 4559 children, txstats.dot3StatsSingleCollisionFrames, 4560 "SingleCollisionFrames"); 4561 BGE_SYSCTL_STAT(sc, ctx, "Multiple Collision Frames", 4562 children, txstats.dot3StatsMultipleCollisionFrames, 4563 "MultipleCollisionFrames"); 4564 BGE_SYSCTL_STAT(sc, ctx, "Deferred Transmissions", 4565 children, txstats.dot3StatsDeferredTransmissions, 4566 "DeferredTransmissions"); 4567 BGE_SYSCTL_STAT(sc, ctx, "Excessive Collisions", 4568 children, txstats.dot3StatsExcessiveCollisions, 4569 "ExcessiveCollisions"); 4570 BGE_SYSCTL_STAT(sc, ctx, "Late Collisions", 4571 children, txstats.dot3StatsLateCollisions, 4572 "LateCollisions"); 4573 BGE_SYSCTL_STAT(sc, ctx, "Outbound Unicast Packets", 4574 children, txstats.ifHCOutUcastPkts, "UcastPkts"); 4575 BGE_SYSCTL_STAT(sc, ctx, "Outbound Multicast Packets", 4576 children, txstats.ifHCOutMulticastPkts, "MulticastPkts"); 4577 BGE_SYSCTL_STAT(sc, ctx, "Outbound Broadcast Packets", 4578 children, txstats.ifHCOutBroadcastPkts, "BroadcastPkts"); 4579 BGE_SYSCTL_STAT(sc, ctx, "Carrier Sense Errors", 4580 children, txstats.dot3StatsCarrierSenseErrors, 4581 "CarrierSenseErrors"); 4582 BGE_SYSCTL_STAT(sc, ctx, "Outbound Discards", 4583 children, txstats.ifOutDiscards, "Discards"); 4584 BGE_SYSCTL_STAT(sc, ctx, "Outbound Errors", 4585 children, txstats.ifOutErrors, "Errors"); 4586 } 4587 4588 static int 4589 bge_sysctl_stats(SYSCTL_HANDLER_ARGS) 4590 { 4591 struct bge_softc *sc; 4592 uint32_t result; 4593 int offset; 4594 4595 sc = (struct bge_softc *)arg1; 4596 offset = arg2; 4597 result = CSR_READ_4(sc, BGE_MEMWIN_START + BGE_STATS_BLOCK + offset + 4598 offsetof(bge_hostaddr, bge_addr_lo)); 4599 return (sysctl_handle_int(oidp, &result, 0, req)); 4600 } 4601 4602 #ifdef BGE_REGISTER_DEBUG 4603 static int 4604 bge_sysctl_debug_info(SYSCTL_HANDLER_ARGS) 4605 { 4606 struct bge_softc *sc; 4607 uint16_t *sbdata; 4608 int error; 4609 int result; 4610 int i, j; 4611 4612 result = -1; 4613 error = sysctl_handle_int(oidp, &result, 0, req); 4614 if (error || (req->newptr == NULL)) 4615 return (error); 4616 4617 if (result == 1) { 4618 sc = (struct bge_softc *)arg1; 4619 4620 sbdata = (uint16_t *)sc->bge_ldata.bge_status_block; 4621 printf("Status Block:\n"); 4622 for (i = 0x0; i < (BGE_STATUS_BLK_SZ / 4); ) { 4623 printf("%06x:", i); 4624 for (j = 0; j < 8; j++) { 4625 printf(" %04x", sbdata[i]); 4626 i += 4; 4627 } 4628 printf("\n"); 4629 } 4630 4631 printf("Registers:\n"); 4632 for (i = 0x800; i < 0xA00; ) { 4633 printf("%06x:", i); 4634 for (j = 0; j < 8; j++) { 4635 printf(" %08x", CSR_READ_4(sc, i)); 4636 i += 4; 4637 } 4638 printf("\n"); 4639 } 4640 4641 printf("Hardware Flags:\n"); 4642 if (BGE_IS_575X_PLUS(sc)) 4643 printf(" - 575X Plus\n"); 4644 if (BGE_IS_5705_PLUS(sc)) 4645 printf(" - 5705 Plus\n"); 4646 if (BGE_IS_5714_FAMILY(sc)) 4647 printf(" - 5714 Family\n"); 4648 if (BGE_IS_5700_FAMILY(sc)) 4649 printf(" - 5700 Family\n"); 4650 if (sc->bge_flags & BGE_FLAG_JUMBO) 4651 printf(" - Supports Jumbo Frames\n"); 4652 if (sc->bge_flags & BGE_FLAG_PCIX) 4653 printf(" - PCI-X Bus\n"); 4654 if (sc->bge_flags & BGE_FLAG_PCIE) 4655 printf(" - PCI Express Bus\n"); 4656 if (sc->bge_flags & BGE_FLAG_NO_3LED) 4657 printf(" - No 3 LEDs\n"); 4658 if (sc->bge_flags & BGE_FLAG_RX_ALIGNBUG) 4659 printf(" - RX Alignment Bug\n"); 4660 } 4661 4662 return (error); 4663 } 4664 4665 static int 4666 bge_sysctl_reg_read(SYSCTL_HANDLER_ARGS) 4667 { 4668 struct bge_softc *sc; 4669 int error; 4670 uint16_t result; 4671 uint32_t val; 4672 4673 result = -1; 4674 error = sysctl_handle_int(oidp, &result, 0, req); 4675 if (error || (req->newptr == NULL)) 4676 return (error); 4677 4678 if (result < 0x8000) { 4679 sc = (struct bge_softc *)arg1; 4680 val = CSR_READ_4(sc, result); 4681 printf("reg 0x%06X = 0x%08X\n", result, val); 4682 } 4683 4684 return (error); 4685 } 4686 4687 static int 4688 bge_sysctl_mem_read(SYSCTL_HANDLER_ARGS) 4689 { 4690 struct bge_softc *sc; 4691 int error; 4692 uint16_t result; 4693 uint32_t val; 4694 4695 result = -1; 4696 error = sysctl_handle_int(oidp, &result, 0, req); 4697 if (error || (req->newptr == NULL)) 4698 return (error); 4699 4700 if (result < 0x8000) { 4701 sc = (struct bge_softc *)arg1; 4702 val = bge_readmem_ind(sc, result); 4703 printf("mem 0x%06X = 0x%08X\n", result, val); 4704 } 4705 4706 return (error); 4707 } 4708 #endif 4709 4710 static int 4711 bge_get_eaddr_fw(struct bge_softc *sc, uint8_t ether_addr[]) 4712 { 4713 4714 if (sc->bge_flags & BGE_FLAG_EADDR) 4715 return (1); 4716 4717 #ifdef __sparc64__ 4718 OF_getetheraddr(sc->bge_dev, ether_addr); 4719 return (0); 4720 #endif 4721 return (1); 4722 } 4723 4724 static int 4725 bge_get_eaddr_mem(struct bge_softc *sc, uint8_t ether_addr[]) 4726 { 4727 uint32_t mac_addr; 4728 4729 mac_addr = bge_readmem_ind(sc, 0x0c14); 4730 if ((mac_addr >> 16) == 0x484b) { 4731 ether_addr[0] = (uint8_t)(mac_addr >> 8); 4732 ether_addr[1] = (uint8_t)mac_addr; 4733 mac_addr = bge_readmem_ind(sc, 0x0c18); 4734 ether_addr[2] = (uint8_t)(mac_addr >> 24); 4735 ether_addr[3] = (uint8_t)(mac_addr >> 16); 4736 ether_addr[4] = (uint8_t)(mac_addr >> 8); 4737 ether_addr[5] = (uint8_t)mac_addr; 4738 return (0); 4739 } 4740 return (1); 4741 } 4742 4743 static int 4744 bge_get_eaddr_nvram(struct bge_softc *sc, uint8_t ether_addr[]) 4745 { 4746 int mac_offset = BGE_EE_MAC_OFFSET; 4747 4748 if (sc->bge_asicrev == BGE_ASICREV_BCM5906) 4749 mac_offset = BGE_EE_MAC_OFFSET_5906; 4750 4751 return (bge_read_nvram(sc, ether_addr, mac_offset + 2, 4752 ETHER_ADDR_LEN)); 4753 } 4754 4755 static int 4756 bge_get_eaddr_eeprom(struct bge_softc *sc, uint8_t ether_addr[]) 4757 { 4758 4759 if (sc->bge_asicrev == BGE_ASICREV_BCM5906) 4760 return (1); 4761 4762 return (bge_read_eeprom(sc, ether_addr, BGE_EE_MAC_OFFSET + 2, 4763 ETHER_ADDR_LEN)); 4764 } 4765 4766 static int 4767 bge_get_eaddr(struct bge_softc *sc, uint8_t eaddr[]) 4768 { 4769 static const bge_eaddr_fcn_t bge_eaddr_funcs[] = { 4770 /* NOTE: Order is critical */ 4771 bge_get_eaddr_fw, 4772 bge_get_eaddr_mem, 4773 bge_get_eaddr_nvram, 4774 bge_get_eaddr_eeprom, 4775 NULL 4776 }; 4777 const bge_eaddr_fcn_t *func; 4778 4779 for (func = bge_eaddr_funcs; *func != NULL; ++func) { 4780 if ((*func)(sc, eaddr) == 0) 4781 break; 4782 } 4783 return (*func == NULL ? ENXIO : 0); 4784 } 4785