1 /*- 2 * Copyright (c) 2001 Wind River Systems 3 * Copyright (c) 1997, 1998, 1999, 2001 4 * Bill Paul <wpaul@windriver.com>. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. All advertising materials mentioning features or use of this software 15 * must display the following acknowledgement: 16 * This product includes software developed by Bill Paul. 17 * 4. Neither the name of the author nor the names of any co-contributors 18 * may be used to endorse or promote products derived from this software 19 * without specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 24 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 25 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 26 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 27 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 28 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 29 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 30 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 31 * THE POSSIBILITY OF SUCH DAMAGE. 32 */ 33 34 #include <sys/cdefs.h> 35 __FBSDID("$FreeBSD$"); 36 37 /* 38 * Broadcom BCM570x family gigabit ethernet driver for FreeBSD. 39 * 40 * The Broadcom BCM5700 is based on technology originally developed by 41 * Alteon Networks as part of the Tigon I and Tigon II gigabit ethernet 42 * MAC chips. The BCM5700, sometimes refered to as the Tigon III, has 43 * two on-board MIPS R4000 CPUs and can have as much as 16MB of external 44 * SSRAM. The BCM5700 supports TCP, UDP and IP checksum offload, jumbo 45 * frames, highly configurable RX filtering, and 16 RX and TX queues 46 * (which, along with RX filter rules, can be used for QOS applications). 47 * Other features, such as TCP segmentation, may be available as part 48 * of value-added firmware updates. Unlike the Tigon I and Tigon II, 49 * firmware images can be stored in hardware and need not be compiled 50 * into the driver. 51 * 52 * The BCM5700 supports the PCI v2.2 and PCI-X v1.0 standards, and will 53 * function in a 32-bit/64-bit 33/66Mhz bus, or a 64-bit/133Mhz bus. 54 * 55 * The BCM5701 is a single-chip solution incorporating both the BCM5700 56 * MAC and a BCM5401 10/100/1000 PHY. Unlike the BCM5700, the BCM5701 57 * does not support external SSRAM. 58 * 59 * Broadcom also produces a variation of the BCM5700 under the "Altima" 60 * brand name, which is functionally similar but lacks PCI-X support. 61 * 62 * Without external SSRAM, you can only have at most 4 TX rings, 63 * and the use of the mini RX ring is disabled. This seems to imply 64 * that these features are simply not available on the BCM5701. As a 65 * result, this driver does not implement any support for the mini RX 66 * ring. 67 */ 68 69 #ifdef HAVE_KERNEL_OPTION_HEADERS 70 #include "opt_device_polling.h" 71 #endif 72 73 #include <sys/param.h> 74 #include <sys/endian.h> 75 #include <sys/systm.h> 76 #include <sys/sockio.h> 77 #include <sys/mbuf.h> 78 #include <sys/malloc.h> 79 #include <sys/kernel.h> 80 #include <sys/module.h> 81 #include <sys/socket.h> 82 #include <sys/sysctl.h> 83 #include <sys/taskqueue.h> 84 85 #include <net/if.h> 86 #include <net/if_arp.h> 87 #include <net/ethernet.h> 88 #include <net/if_dl.h> 89 #include <net/if_media.h> 90 91 #include <net/bpf.h> 92 93 #include <net/if_types.h> 94 #include <net/if_vlan_var.h> 95 96 #include <netinet/in_systm.h> 97 #include <netinet/in.h> 98 #include <netinet/ip.h> 99 #include <netinet/tcp.h> 100 101 #include <machine/bus.h> 102 #include <machine/resource.h> 103 #include <sys/bus.h> 104 #include <sys/rman.h> 105 106 #include <dev/mii/mii.h> 107 #include <dev/mii/miivar.h> 108 #include "miidevs.h" 109 #include <dev/mii/brgphyreg.h> 110 111 #ifdef __sparc64__ 112 #include <dev/ofw/ofw_bus.h> 113 #include <dev/ofw/openfirm.h> 114 #include <machine/ofw_machdep.h> 115 #include <machine/ver.h> 116 #endif 117 118 #include <dev/pci/pcireg.h> 119 #include <dev/pci/pcivar.h> 120 121 #include <dev/bge/if_bgereg.h> 122 123 #define BGE_CSUM_FEATURES (CSUM_IP | CSUM_TCP | CSUM_UDP) 124 #define ETHER_MIN_NOPAD (ETHER_MIN_LEN - ETHER_CRC_LEN) /* i.e., 60 */ 125 126 MODULE_DEPEND(bge, pci, 1, 1, 1); 127 MODULE_DEPEND(bge, ether, 1, 1, 1); 128 MODULE_DEPEND(bge, miibus, 1, 1, 1); 129 130 /* "device miibus" required. See GENERIC if you get errors here. */ 131 #include "miibus_if.h" 132 133 /* 134 * Various supported device vendors/types and their names. Note: the 135 * spec seems to indicate that the hardware still has Alteon's vendor 136 * ID burned into it, though it will always be overriden by the vendor 137 * ID in the EEPROM. Just to be safe, we cover all possibilities. 138 */ 139 static const struct bge_type { 140 uint16_t bge_vid; 141 uint16_t bge_did; 142 } bge_devs[] = { 143 { ALTEON_VENDORID, ALTEON_DEVICEID_BCM5700 }, 144 { ALTEON_VENDORID, ALTEON_DEVICEID_BCM5701 }, 145 146 { ALTIMA_VENDORID, ALTIMA_DEVICE_AC1000 }, 147 { ALTIMA_VENDORID, ALTIMA_DEVICE_AC1002 }, 148 { ALTIMA_VENDORID, ALTIMA_DEVICE_AC9100 }, 149 150 { APPLE_VENDORID, APPLE_DEVICE_BCM5701 }, 151 152 { BCOM_VENDORID, BCOM_DEVICEID_BCM5700 }, 153 { BCOM_VENDORID, BCOM_DEVICEID_BCM5701 }, 154 { BCOM_VENDORID, BCOM_DEVICEID_BCM5702 }, 155 { BCOM_VENDORID, BCOM_DEVICEID_BCM5702_ALT }, 156 { BCOM_VENDORID, BCOM_DEVICEID_BCM5702X }, 157 { BCOM_VENDORID, BCOM_DEVICEID_BCM5703 }, 158 { BCOM_VENDORID, BCOM_DEVICEID_BCM5703_ALT }, 159 { BCOM_VENDORID, BCOM_DEVICEID_BCM5703X }, 160 { BCOM_VENDORID, BCOM_DEVICEID_BCM5704C }, 161 { BCOM_VENDORID, BCOM_DEVICEID_BCM5704S }, 162 { BCOM_VENDORID, BCOM_DEVICEID_BCM5704S_ALT }, 163 { BCOM_VENDORID, BCOM_DEVICEID_BCM5705 }, 164 { BCOM_VENDORID, BCOM_DEVICEID_BCM5705F }, 165 { BCOM_VENDORID, BCOM_DEVICEID_BCM5705K }, 166 { BCOM_VENDORID, BCOM_DEVICEID_BCM5705M }, 167 { BCOM_VENDORID, BCOM_DEVICEID_BCM5705M_ALT }, 168 { BCOM_VENDORID, BCOM_DEVICEID_BCM5714C }, 169 { BCOM_VENDORID, BCOM_DEVICEID_BCM5714S }, 170 { BCOM_VENDORID, BCOM_DEVICEID_BCM5715 }, 171 { BCOM_VENDORID, BCOM_DEVICEID_BCM5715S }, 172 { BCOM_VENDORID, BCOM_DEVICEID_BCM5720 }, 173 { BCOM_VENDORID, BCOM_DEVICEID_BCM5721 }, 174 { BCOM_VENDORID, BCOM_DEVICEID_BCM5722 }, 175 { BCOM_VENDORID, BCOM_DEVICEID_BCM5723 }, 176 { BCOM_VENDORID, BCOM_DEVICEID_BCM5750 }, 177 { BCOM_VENDORID, BCOM_DEVICEID_BCM5750M }, 178 { BCOM_VENDORID, BCOM_DEVICEID_BCM5751 }, 179 { BCOM_VENDORID, BCOM_DEVICEID_BCM5751F }, 180 { BCOM_VENDORID, BCOM_DEVICEID_BCM5751M }, 181 { BCOM_VENDORID, BCOM_DEVICEID_BCM5752 }, 182 { BCOM_VENDORID, BCOM_DEVICEID_BCM5752M }, 183 { BCOM_VENDORID, BCOM_DEVICEID_BCM5753 }, 184 { BCOM_VENDORID, BCOM_DEVICEID_BCM5753F }, 185 { BCOM_VENDORID, BCOM_DEVICEID_BCM5753M }, 186 { BCOM_VENDORID, BCOM_DEVICEID_BCM5754 }, 187 { BCOM_VENDORID, BCOM_DEVICEID_BCM5754M }, 188 { BCOM_VENDORID, BCOM_DEVICEID_BCM5755 }, 189 { BCOM_VENDORID, BCOM_DEVICEID_BCM5755M }, 190 { BCOM_VENDORID, BCOM_DEVICEID_BCM5756 }, 191 { BCOM_VENDORID, BCOM_DEVICEID_BCM5761 }, 192 { BCOM_VENDORID, BCOM_DEVICEID_BCM5761E }, 193 { BCOM_VENDORID, BCOM_DEVICEID_BCM5761S }, 194 { BCOM_VENDORID, BCOM_DEVICEID_BCM5761SE }, 195 { BCOM_VENDORID, BCOM_DEVICEID_BCM5764 }, 196 { BCOM_VENDORID, BCOM_DEVICEID_BCM5780 }, 197 { BCOM_VENDORID, BCOM_DEVICEID_BCM5780S }, 198 { BCOM_VENDORID, BCOM_DEVICEID_BCM5781 }, 199 { BCOM_VENDORID, BCOM_DEVICEID_BCM5782 }, 200 { BCOM_VENDORID, BCOM_DEVICEID_BCM5784 }, 201 { BCOM_VENDORID, BCOM_DEVICEID_BCM5785F }, 202 { BCOM_VENDORID, BCOM_DEVICEID_BCM5785G }, 203 { BCOM_VENDORID, BCOM_DEVICEID_BCM5786 }, 204 { BCOM_VENDORID, BCOM_DEVICEID_BCM5787 }, 205 { BCOM_VENDORID, BCOM_DEVICEID_BCM5787F }, 206 { BCOM_VENDORID, BCOM_DEVICEID_BCM5787M }, 207 { BCOM_VENDORID, BCOM_DEVICEID_BCM5788 }, 208 { BCOM_VENDORID, BCOM_DEVICEID_BCM5789 }, 209 { BCOM_VENDORID, BCOM_DEVICEID_BCM5901 }, 210 { BCOM_VENDORID, BCOM_DEVICEID_BCM5901A2 }, 211 { BCOM_VENDORID, BCOM_DEVICEID_BCM5903M }, 212 { BCOM_VENDORID, BCOM_DEVICEID_BCM5906 }, 213 { BCOM_VENDORID, BCOM_DEVICEID_BCM5906M }, 214 { BCOM_VENDORID, BCOM_DEVICEID_BCM57760 }, 215 { BCOM_VENDORID, BCOM_DEVICEID_BCM57780 }, 216 { BCOM_VENDORID, BCOM_DEVICEID_BCM57788 }, 217 { BCOM_VENDORID, BCOM_DEVICEID_BCM57790 }, 218 219 { SK_VENDORID, SK_DEVICEID_ALTIMA }, 220 221 { TC_VENDORID, TC_DEVICEID_3C996 }, 222 223 { FJTSU_VENDORID, FJTSU_DEVICEID_PW008GE4 }, 224 { FJTSU_VENDORID, FJTSU_DEVICEID_PW008GE5 }, 225 { FJTSU_VENDORID, FJTSU_DEVICEID_PP250450 }, 226 227 { 0, 0 } 228 }; 229 230 static const struct bge_vendor { 231 uint16_t v_id; 232 const char *v_name; 233 } bge_vendors[] = { 234 { ALTEON_VENDORID, "Alteon" }, 235 { ALTIMA_VENDORID, "Altima" }, 236 { APPLE_VENDORID, "Apple" }, 237 { BCOM_VENDORID, "Broadcom" }, 238 { SK_VENDORID, "SysKonnect" }, 239 { TC_VENDORID, "3Com" }, 240 { FJTSU_VENDORID, "Fujitsu" }, 241 242 { 0, NULL } 243 }; 244 245 static const struct bge_revision { 246 uint32_t br_chipid; 247 const char *br_name; 248 } bge_revisions[] = { 249 { BGE_CHIPID_BCM5700_A0, "BCM5700 A0" }, 250 { BGE_CHIPID_BCM5700_A1, "BCM5700 A1" }, 251 { BGE_CHIPID_BCM5700_B0, "BCM5700 B0" }, 252 { BGE_CHIPID_BCM5700_B1, "BCM5700 B1" }, 253 { BGE_CHIPID_BCM5700_B2, "BCM5700 B2" }, 254 { BGE_CHIPID_BCM5700_B3, "BCM5700 B3" }, 255 { BGE_CHIPID_BCM5700_ALTIMA, "BCM5700 Altima" }, 256 { BGE_CHIPID_BCM5700_C0, "BCM5700 C0" }, 257 { BGE_CHIPID_BCM5701_A0, "BCM5701 A0" }, 258 { BGE_CHIPID_BCM5701_B0, "BCM5701 B0" }, 259 { BGE_CHIPID_BCM5701_B2, "BCM5701 B2" }, 260 { BGE_CHIPID_BCM5701_B5, "BCM5701 B5" }, 261 { BGE_CHIPID_BCM5703_A0, "BCM5703 A0" }, 262 { BGE_CHIPID_BCM5703_A1, "BCM5703 A1" }, 263 { BGE_CHIPID_BCM5703_A2, "BCM5703 A2" }, 264 { BGE_CHIPID_BCM5703_A3, "BCM5703 A3" }, 265 { BGE_CHIPID_BCM5703_B0, "BCM5703 B0" }, 266 { BGE_CHIPID_BCM5704_A0, "BCM5704 A0" }, 267 { BGE_CHIPID_BCM5704_A1, "BCM5704 A1" }, 268 { BGE_CHIPID_BCM5704_A2, "BCM5704 A2" }, 269 { BGE_CHIPID_BCM5704_A3, "BCM5704 A3" }, 270 { BGE_CHIPID_BCM5704_B0, "BCM5704 B0" }, 271 { BGE_CHIPID_BCM5705_A0, "BCM5705 A0" }, 272 { BGE_CHIPID_BCM5705_A1, "BCM5705 A1" }, 273 { BGE_CHIPID_BCM5705_A2, "BCM5705 A2" }, 274 { BGE_CHIPID_BCM5705_A3, "BCM5705 A3" }, 275 { BGE_CHIPID_BCM5750_A0, "BCM5750 A0" }, 276 { BGE_CHIPID_BCM5750_A1, "BCM5750 A1" }, 277 { BGE_CHIPID_BCM5750_A3, "BCM5750 A3" }, 278 { BGE_CHIPID_BCM5750_B0, "BCM5750 B0" }, 279 { BGE_CHIPID_BCM5750_B1, "BCM5750 B1" }, 280 { BGE_CHIPID_BCM5750_C0, "BCM5750 C0" }, 281 { BGE_CHIPID_BCM5750_C1, "BCM5750 C1" }, 282 { BGE_CHIPID_BCM5750_C2, "BCM5750 C2" }, 283 { BGE_CHIPID_BCM5714_A0, "BCM5714 A0" }, 284 { BGE_CHIPID_BCM5752_A0, "BCM5752 A0" }, 285 { BGE_CHIPID_BCM5752_A1, "BCM5752 A1" }, 286 { BGE_CHIPID_BCM5752_A2, "BCM5752 A2" }, 287 { BGE_CHIPID_BCM5714_B0, "BCM5714 B0" }, 288 { BGE_CHIPID_BCM5714_B3, "BCM5714 B3" }, 289 { BGE_CHIPID_BCM5715_A0, "BCM5715 A0" }, 290 { BGE_CHIPID_BCM5715_A1, "BCM5715 A1" }, 291 { BGE_CHIPID_BCM5715_A3, "BCM5715 A3" }, 292 { BGE_CHIPID_BCM5755_A0, "BCM5755 A0" }, 293 { BGE_CHIPID_BCM5755_A1, "BCM5755 A1" }, 294 { BGE_CHIPID_BCM5755_A2, "BCM5755 A2" }, 295 { BGE_CHIPID_BCM5722_A0, "BCM5722 A0" }, 296 { BGE_CHIPID_BCM5761_A0, "BCM5761 A0" }, 297 { BGE_CHIPID_BCM5761_A1, "BCM5761 A1" }, 298 { BGE_CHIPID_BCM5784_A0, "BCM5784 A0" }, 299 { BGE_CHIPID_BCM5784_A1, "BCM5784 A1" }, 300 /* 5754 and 5787 share the same ASIC ID */ 301 { BGE_CHIPID_BCM5787_A0, "BCM5754/5787 A0" }, 302 { BGE_CHIPID_BCM5787_A1, "BCM5754/5787 A1" }, 303 { BGE_CHIPID_BCM5787_A2, "BCM5754/5787 A2" }, 304 { BGE_CHIPID_BCM5906_A1, "BCM5906 A1" }, 305 { BGE_CHIPID_BCM5906_A2, "BCM5906 A2" }, 306 { BGE_CHIPID_BCM57780_A0, "BCM57780 A0" }, 307 { BGE_CHIPID_BCM57780_A1, "BCM57780 A1" }, 308 309 { 0, NULL } 310 }; 311 312 /* 313 * Some defaults for major revisions, so that newer steppings 314 * that we don't know about have a shot at working. 315 */ 316 static const struct bge_revision bge_majorrevs[] = { 317 { BGE_ASICREV_BCM5700, "unknown BCM5700" }, 318 { BGE_ASICREV_BCM5701, "unknown BCM5701" }, 319 { BGE_ASICREV_BCM5703, "unknown BCM5703" }, 320 { BGE_ASICREV_BCM5704, "unknown BCM5704" }, 321 { BGE_ASICREV_BCM5705, "unknown BCM5705" }, 322 { BGE_ASICREV_BCM5750, "unknown BCM5750" }, 323 { BGE_ASICREV_BCM5714_A0, "unknown BCM5714" }, 324 { BGE_ASICREV_BCM5752, "unknown BCM5752" }, 325 { BGE_ASICREV_BCM5780, "unknown BCM5780" }, 326 { BGE_ASICREV_BCM5714, "unknown BCM5714" }, 327 { BGE_ASICREV_BCM5755, "unknown BCM5755" }, 328 { BGE_ASICREV_BCM5761, "unknown BCM5761" }, 329 { BGE_ASICREV_BCM5784, "unknown BCM5784" }, 330 { BGE_ASICREV_BCM5785, "unknown BCM5785" }, 331 /* 5754 and 5787 share the same ASIC ID */ 332 { BGE_ASICREV_BCM5787, "unknown BCM5754/5787" }, 333 { BGE_ASICREV_BCM5906, "unknown BCM5906" }, 334 { BGE_ASICREV_BCM57780, "unknown BCM57780" }, 335 336 { 0, NULL } 337 }; 338 339 #define BGE_IS_JUMBO_CAPABLE(sc) ((sc)->bge_flags & BGE_FLAG_JUMBO) 340 #define BGE_IS_5700_FAMILY(sc) ((sc)->bge_flags & BGE_FLAG_5700_FAMILY) 341 #define BGE_IS_5705_PLUS(sc) ((sc)->bge_flags & BGE_FLAG_5705_PLUS) 342 #define BGE_IS_5714_FAMILY(sc) ((sc)->bge_flags & BGE_FLAG_5714_FAMILY) 343 #define BGE_IS_575X_PLUS(sc) ((sc)->bge_flags & BGE_FLAG_575X_PLUS) 344 #define BGE_IS_5755_PLUS(sc) ((sc)->bge_flags & BGE_FLAG_5755_PLUS) 345 346 const struct bge_revision * bge_lookup_rev(uint32_t); 347 const struct bge_vendor * bge_lookup_vendor(uint16_t); 348 349 typedef int (*bge_eaddr_fcn_t)(struct bge_softc *, uint8_t[]); 350 351 static int bge_probe(device_t); 352 static int bge_attach(device_t); 353 static int bge_detach(device_t); 354 static int bge_suspend(device_t); 355 static int bge_resume(device_t); 356 static void bge_release_resources(struct bge_softc *); 357 static void bge_dma_map_addr(void *, bus_dma_segment_t *, int, int); 358 static int bge_dma_alloc(device_t); 359 static void bge_dma_free(struct bge_softc *); 360 361 static int bge_get_eaddr_fw(struct bge_softc *sc, uint8_t ether_addr[]); 362 static int bge_get_eaddr_mem(struct bge_softc *, uint8_t[]); 363 static int bge_get_eaddr_nvram(struct bge_softc *, uint8_t[]); 364 static int bge_get_eaddr_eeprom(struct bge_softc *, uint8_t[]); 365 static int bge_get_eaddr(struct bge_softc *, uint8_t[]); 366 367 static void bge_txeof(struct bge_softc *, uint16_t); 368 static int bge_rxeof(struct bge_softc *, uint16_t, int); 369 370 static void bge_asf_driver_up (struct bge_softc *); 371 static void bge_tick(void *); 372 static void bge_stats_update(struct bge_softc *); 373 static void bge_stats_update_regs(struct bge_softc *); 374 static struct mbuf *bge_setup_tso(struct bge_softc *, struct mbuf *, 375 uint16_t *); 376 static int bge_encap(struct bge_softc *, struct mbuf **, uint32_t *); 377 378 static void bge_intr(void *); 379 static int bge_msi_intr(void *); 380 static void bge_intr_task(void *, int); 381 static void bge_start_locked(struct ifnet *); 382 static void bge_start(struct ifnet *); 383 static int bge_ioctl(struct ifnet *, u_long, caddr_t); 384 static void bge_init_locked(struct bge_softc *); 385 static void bge_init(void *); 386 static void bge_stop(struct bge_softc *); 387 static void bge_watchdog(struct bge_softc *); 388 static int bge_shutdown(device_t); 389 static int bge_ifmedia_upd_locked(struct ifnet *); 390 static int bge_ifmedia_upd(struct ifnet *); 391 static void bge_ifmedia_sts(struct ifnet *, struct ifmediareq *); 392 393 static uint8_t bge_nvram_getbyte(struct bge_softc *, int, uint8_t *); 394 static int bge_read_nvram(struct bge_softc *, caddr_t, int, int); 395 396 static uint8_t bge_eeprom_getbyte(struct bge_softc *, int, uint8_t *); 397 static int bge_read_eeprom(struct bge_softc *, caddr_t, int, int); 398 399 static void bge_setpromisc(struct bge_softc *); 400 static void bge_setmulti(struct bge_softc *); 401 static void bge_setvlan(struct bge_softc *); 402 403 static int bge_newbuf_std(struct bge_softc *, int); 404 static int bge_newbuf_jumbo(struct bge_softc *, int); 405 static int bge_init_rx_ring_std(struct bge_softc *); 406 static void bge_free_rx_ring_std(struct bge_softc *); 407 static int bge_init_rx_ring_jumbo(struct bge_softc *); 408 static void bge_free_rx_ring_jumbo(struct bge_softc *); 409 static void bge_free_tx_ring(struct bge_softc *); 410 static int bge_init_tx_ring(struct bge_softc *); 411 412 static int bge_chipinit(struct bge_softc *); 413 static int bge_blockinit(struct bge_softc *); 414 415 static int bge_has_eaddr(struct bge_softc *); 416 static uint32_t bge_readmem_ind(struct bge_softc *, int); 417 static void bge_writemem_ind(struct bge_softc *, int, int); 418 static void bge_writembx(struct bge_softc *, int, int); 419 #ifdef notdef 420 static uint32_t bge_readreg_ind(struct bge_softc *, int); 421 #endif 422 static void bge_writemem_direct(struct bge_softc *, int, int); 423 static void bge_writereg_ind(struct bge_softc *, int, int); 424 static void bge_set_max_readrq(struct bge_softc *); 425 426 static int bge_miibus_readreg(device_t, int, int); 427 static int bge_miibus_writereg(device_t, int, int, int); 428 static void bge_miibus_statchg(device_t); 429 #ifdef DEVICE_POLLING 430 static int bge_poll(struct ifnet *ifp, enum poll_cmd cmd, int count); 431 #endif 432 433 #define BGE_RESET_START 1 434 #define BGE_RESET_STOP 2 435 static void bge_sig_post_reset(struct bge_softc *, int); 436 static void bge_sig_legacy(struct bge_softc *, int); 437 static void bge_sig_pre_reset(struct bge_softc *, int); 438 static int bge_reset(struct bge_softc *); 439 static void bge_link_upd(struct bge_softc *); 440 441 /* 442 * The BGE_REGISTER_DEBUG option is only for low-level debugging. It may 443 * leak information to untrusted users. It is also known to cause alignment 444 * traps on certain architectures. 445 */ 446 #ifdef BGE_REGISTER_DEBUG 447 static int bge_sysctl_debug_info(SYSCTL_HANDLER_ARGS); 448 static int bge_sysctl_reg_read(SYSCTL_HANDLER_ARGS); 449 static int bge_sysctl_mem_read(SYSCTL_HANDLER_ARGS); 450 #endif 451 static void bge_add_sysctls(struct bge_softc *); 452 static int bge_sysctl_stats(SYSCTL_HANDLER_ARGS); 453 454 static device_method_t bge_methods[] = { 455 /* Device interface */ 456 DEVMETHOD(device_probe, bge_probe), 457 DEVMETHOD(device_attach, bge_attach), 458 DEVMETHOD(device_detach, bge_detach), 459 DEVMETHOD(device_shutdown, bge_shutdown), 460 DEVMETHOD(device_suspend, bge_suspend), 461 DEVMETHOD(device_resume, bge_resume), 462 463 /* bus interface */ 464 DEVMETHOD(bus_print_child, bus_generic_print_child), 465 DEVMETHOD(bus_driver_added, bus_generic_driver_added), 466 467 /* MII interface */ 468 DEVMETHOD(miibus_readreg, bge_miibus_readreg), 469 DEVMETHOD(miibus_writereg, bge_miibus_writereg), 470 DEVMETHOD(miibus_statchg, bge_miibus_statchg), 471 472 { 0, 0 } 473 }; 474 475 static driver_t bge_driver = { 476 "bge", 477 bge_methods, 478 sizeof(struct bge_softc) 479 }; 480 481 static devclass_t bge_devclass; 482 483 DRIVER_MODULE(bge, pci, bge_driver, bge_devclass, 0, 0); 484 DRIVER_MODULE(miibus, bge, miibus_driver, miibus_devclass, 0, 0); 485 486 static int bge_allow_asf = 1; 487 488 TUNABLE_INT("hw.bge.allow_asf", &bge_allow_asf); 489 490 SYSCTL_NODE(_hw, OID_AUTO, bge, CTLFLAG_RD, 0, "BGE driver parameters"); 491 SYSCTL_INT(_hw_bge, OID_AUTO, allow_asf, CTLFLAG_RD, &bge_allow_asf, 0, 492 "Allow ASF mode if available"); 493 494 #define SPARC64_BLADE_1500_MODEL "SUNW,Sun-Blade-1500" 495 #define SPARC64_BLADE_1500_PATH_BGE "/pci@1f,700000/network@2" 496 #define SPARC64_BLADE_2500_MODEL "SUNW,Sun-Blade-2500" 497 #define SPARC64_BLADE_2500_PATH_BGE "/pci@1c,600000/network@3" 498 #define SPARC64_OFW_SUBVENDOR "subsystem-vendor-id" 499 500 static int 501 bge_has_eaddr(struct bge_softc *sc) 502 { 503 #ifdef __sparc64__ 504 char buf[sizeof(SPARC64_BLADE_1500_PATH_BGE)]; 505 device_t dev; 506 uint32_t subvendor; 507 508 dev = sc->bge_dev; 509 510 /* 511 * The on-board BGEs found in sun4u machines aren't fitted with 512 * an EEPROM which means that we have to obtain the MAC address 513 * via OFW and that some tests will always fail. We distinguish 514 * such BGEs by the subvendor ID, which also has to be obtained 515 * from OFW instead of the PCI configuration space as the latter 516 * indicates Broadcom as the subvendor of the netboot interface. 517 * For early Blade 1500 and 2500 we even have to check the OFW 518 * device path as the subvendor ID always defaults to Broadcom 519 * there. 520 */ 521 if (OF_getprop(ofw_bus_get_node(dev), SPARC64_OFW_SUBVENDOR, 522 &subvendor, sizeof(subvendor)) == sizeof(subvendor) && 523 subvendor == SUN_VENDORID) 524 return (0); 525 memset(buf, 0, sizeof(buf)); 526 if (OF_package_to_path(ofw_bus_get_node(dev), buf, sizeof(buf)) > 0) { 527 if (strcmp(sparc64_model, SPARC64_BLADE_1500_MODEL) == 0 && 528 strcmp(buf, SPARC64_BLADE_1500_PATH_BGE) == 0) 529 return (0); 530 if (strcmp(sparc64_model, SPARC64_BLADE_2500_MODEL) == 0 && 531 strcmp(buf, SPARC64_BLADE_2500_PATH_BGE) == 0) 532 return (0); 533 } 534 #endif 535 return (1); 536 } 537 538 static uint32_t 539 bge_readmem_ind(struct bge_softc *sc, int off) 540 { 541 device_t dev; 542 uint32_t val; 543 544 dev = sc->bge_dev; 545 546 pci_write_config(dev, BGE_PCI_MEMWIN_BASEADDR, off, 4); 547 val = pci_read_config(dev, BGE_PCI_MEMWIN_DATA, 4); 548 pci_write_config(dev, BGE_PCI_MEMWIN_BASEADDR, 0, 4); 549 return (val); 550 } 551 552 static void 553 bge_writemem_ind(struct bge_softc *sc, int off, int val) 554 { 555 device_t dev; 556 557 dev = sc->bge_dev; 558 559 pci_write_config(dev, BGE_PCI_MEMWIN_BASEADDR, off, 4); 560 pci_write_config(dev, BGE_PCI_MEMWIN_DATA, val, 4); 561 pci_write_config(dev, BGE_PCI_MEMWIN_BASEADDR, 0, 4); 562 } 563 564 /* 565 * PCI Express only 566 */ 567 static void 568 bge_set_max_readrq(struct bge_softc *sc) 569 { 570 device_t dev; 571 uint16_t val; 572 573 dev = sc->bge_dev; 574 575 val = pci_read_config(dev, sc->bge_expcap + PCIR_EXPRESS_DEVICE_CTL, 2); 576 if ((val & PCIM_EXP_CTL_MAX_READ_REQUEST) != 577 BGE_PCIE_DEVCTL_MAX_READRQ_4096) { 578 if (bootverbose) 579 device_printf(dev, "adjust device control 0x%04x ", 580 val); 581 val &= ~PCIM_EXP_CTL_MAX_READ_REQUEST; 582 val |= BGE_PCIE_DEVCTL_MAX_READRQ_4096; 583 pci_write_config(dev, sc->bge_expcap + PCIR_EXPRESS_DEVICE_CTL, 584 val, 2); 585 if (bootverbose) 586 printf("-> 0x%04x\n", val); 587 } 588 } 589 590 #ifdef notdef 591 static uint32_t 592 bge_readreg_ind(struct bge_softc *sc, int off) 593 { 594 device_t dev; 595 596 dev = sc->bge_dev; 597 598 pci_write_config(dev, BGE_PCI_REG_BASEADDR, off, 4); 599 return (pci_read_config(dev, BGE_PCI_REG_DATA, 4)); 600 } 601 #endif 602 603 static void 604 bge_writereg_ind(struct bge_softc *sc, int off, int val) 605 { 606 device_t dev; 607 608 dev = sc->bge_dev; 609 610 pci_write_config(dev, BGE_PCI_REG_BASEADDR, off, 4); 611 pci_write_config(dev, BGE_PCI_REG_DATA, val, 4); 612 } 613 614 static void 615 bge_writemem_direct(struct bge_softc *sc, int off, int val) 616 { 617 CSR_WRITE_4(sc, off, val); 618 } 619 620 static void 621 bge_writembx(struct bge_softc *sc, int off, int val) 622 { 623 if (sc->bge_asicrev == BGE_ASICREV_BCM5906) 624 off += BGE_LPMBX_IRQ0_HI - BGE_MBX_IRQ0_HI; 625 626 CSR_WRITE_4(sc, off, val); 627 } 628 629 /* 630 * Map a single buffer address. 631 */ 632 633 static void 634 bge_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error) 635 { 636 struct bge_dmamap_arg *ctx; 637 638 if (error) 639 return; 640 641 ctx = arg; 642 643 if (nseg > ctx->bge_maxsegs) { 644 ctx->bge_maxsegs = 0; 645 return; 646 } 647 648 ctx->bge_busaddr = segs->ds_addr; 649 } 650 651 static uint8_t 652 bge_nvram_getbyte(struct bge_softc *sc, int addr, uint8_t *dest) 653 { 654 uint32_t access, byte = 0; 655 int i; 656 657 /* Lock. */ 658 CSR_WRITE_4(sc, BGE_NVRAM_SWARB, BGE_NVRAMSWARB_SET1); 659 for (i = 0; i < 8000; i++) { 660 if (CSR_READ_4(sc, BGE_NVRAM_SWARB) & BGE_NVRAMSWARB_GNT1) 661 break; 662 DELAY(20); 663 } 664 if (i == 8000) 665 return (1); 666 667 /* Enable access. */ 668 access = CSR_READ_4(sc, BGE_NVRAM_ACCESS); 669 CSR_WRITE_4(sc, BGE_NVRAM_ACCESS, access | BGE_NVRAMACC_ENABLE); 670 671 CSR_WRITE_4(sc, BGE_NVRAM_ADDR, addr & 0xfffffffc); 672 CSR_WRITE_4(sc, BGE_NVRAM_CMD, BGE_NVRAM_READCMD); 673 for (i = 0; i < BGE_TIMEOUT * 10; i++) { 674 DELAY(10); 675 if (CSR_READ_4(sc, BGE_NVRAM_CMD) & BGE_NVRAMCMD_DONE) { 676 DELAY(10); 677 break; 678 } 679 } 680 681 if (i == BGE_TIMEOUT * 10) { 682 if_printf(sc->bge_ifp, "nvram read timed out\n"); 683 return (1); 684 } 685 686 /* Get result. */ 687 byte = CSR_READ_4(sc, BGE_NVRAM_RDDATA); 688 689 *dest = (bswap32(byte) >> ((addr % 4) * 8)) & 0xFF; 690 691 /* Disable access. */ 692 CSR_WRITE_4(sc, BGE_NVRAM_ACCESS, access); 693 694 /* Unlock. */ 695 CSR_WRITE_4(sc, BGE_NVRAM_SWARB, BGE_NVRAMSWARB_CLR1); 696 CSR_READ_4(sc, BGE_NVRAM_SWARB); 697 698 return (0); 699 } 700 701 /* 702 * Read a sequence of bytes from NVRAM. 703 */ 704 static int 705 bge_read_nvram(struct bge_softc *sc, caddr_t dest, int off, int cnt) 706 { 707 int err = 0, i; 708 uint8_t byte = 0; 709 710 if (sc->bge_asicrev != BGE_ASICREV_BCM5906) 711 return (1); 712 713 for (i = 0; i < cnt; i++) { 714 err = bge_nvram_getbyte(sc, off + i, &byte); 715 if (err) 716 break; 717 *(dest + i) = byte; 718 } 719 720 return (err ? 1 : 0); 721 } 722 723 /* 724 * Read a byte of data stored in the EEPROM at address 'addr.' The 725 * BCM570x supports both the traditional bitbang interface and an 726 * auto access interface for reading the EEPROM. We use the auto 727 * access method. 728 */ 729 static uint8_t 730 bge_eeprom_getbyte(struct bge_softc *sc, int addr, uint8_t *dest) 731 { 732 int i; 733 uint32_t byte = 0; 734 735 /* 736 * Enable use of auto EEPROM access so we can avoid 737 * having to use the bitbang method. 738 */ 739 BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_AUTO_EEPROM); 740 741 /* Reset the EEPROM, load the clock period. */ 742 CSR_WRITE_4(sc, BGE_EE_ADDR, 743 BGE_EEADDR_RESET | BGE_EEHALFCLK(BGE_HALFCLK_384SCL)); 744 DELAY(20); 745 746 /* Issue the read EEPROM command. */ 747 CSR_WRITE_4(sc, BGE_EE_ADDR, BGE_EE_READCMD | addr); 748 749 /* Wait for completion */ 750 for(i = 0; i < BGE_TIMEOUT * 10; i++) { 751 DELAY(10); 752 if (CSR_READ_4(sc, BGE_EE_ADDR) & BGE_EEADDR_DONE) 753 break; 754 } 755 756 if (i == BGE_TIMEOUT * 10) { 757 device_printf(sc->bge_dev, "EEPROM read timed out\n"); 758 return (1); 759 } 760 761 /* Get result. */ 762 byte = CSR_READ_4(sc, BGE_EE_DATA); 763 764 *dest = (byte >> ((addr % 4) * 8)) & 0xFF; 765 766 return (0); 767 } 768 769 /* 770 * Read a sequence of bytes from the EEPROM. 771 */ 772 static int 773 bge_read_eeprom(struct bge_softc *sc, caddr_t dest, int off, int cnt) 774 { 775 int i, error = 0; 776 uint8_t byte = 0; 777 778 for (i = 0; i < cnt; i++) { 779 error = bge_eeprom_getbyte(sc, off + i, &byte); 780 if (error) 781 break; 782 *(dest + i) = byte; 783 } 784 785 return (error ? 1 : 0); 786 } 787 788 static int 789 bge_miibus_readreg(device_t dev, int phy, int reg) 790 { 791 struct bge_softc *sc; 792 uint32_t val, autopoll; 793 int i; 794 795 sc = device_get_softc(dev); 796 797 /* 798 * Broadcom's own driver always assumes the internal 799 * PHY is at GMII address 1. On some chips, the PHY responds 800 * to accesses at all addresses, which could cause us to 801 * bogusly attach the PHY 32 times at probe type. Always 802 * restricting the lookup to address 1 is simpler than 803 * trying to figure out which chips revisions should be 804 * special-cased. 805 */ 806 if (phy != 1) 807 return (0); 808 809 /* Reading with autopolling on may trigger PCI errors */ 810 autopoll = CSR_READ_4(sc, BGE_MI_MODE); 811 if (autopoll & BGE_MIMODE_AUTOPOLL) { 812 BGE_CLRBIT(sc, BGE_MI_MODE, BGE_MIMODE_AUTOPOLL); 813 DELAY(40); 814 } 815 816 CSR_WRITE_4(sc, BGE_MI_COMM, BGE_MICMD_READ | BGE_MICOMM_BUSY | 817 BGE_MIPHY(phy) | BGE_MIREG(reg)); 818 819 for (i = 0; i < BGE_TIMEOUT; i++) { 820 DELAY(10); 821 val = CSR_READ_4(sc, BGE_MI_COMM); 822 if (!(val & BGE_MICOMM_BUSY)) 823 break; 824 } 825 826 if (i == BGE_TIMEOUT) { 827 device_printf(sc->bge_dev, 828 "PHY read timed out (phy %d, reg %d, val 0x%08x)\n", 829 phy, reg, val); 830 val = 0; 831 goto done; 832 } 833 834 DELAY(5); 835 val = CSR_READ_4(sc, BGE_MI_COMM); 836 837 done: 838 if (autopoll & BGE_MIMODE_AUTOPOLL) { 839 BGE_SETBIT(sc, BGE_MI_MODE, BGE_MIMODE_AUTOPOLL); 840 DELAY(40); 841 } 842 843 if (val & BGE_MICOMM_READFAIL) 844 return (0); 845 846 return (val & 0xFFFF); 847 } 848 849 static int 850 bge_miibus_writereg(device_t dev, int phy, int reg, int val) 851 { 852 struct bge_softc *sc; 853 uint32_t autopoll; 854 int i; 855 856 sc = device_get_softc(dev); 857 858 if (sc->bge_asicrev == BGE_ASICREV_BCM5906 && 859 (reg == BRGPHY_MII_1000CTL || reg == BRGPHY_MII_AUXCTL)) 860 return(0); 861 862 /* Reading with autopolling on may trigger PCI errors */ 863 autopoll = CSR_READ_4(sc, BGE_MI_MODE); 864 if (autopoll & BGE_MIMODE_AUTOPOLL) { 865 BGE_CLRBIT(sc, BGE_MI_MODE, BGE_MIMODE_AUTOPOLL); 866 DELAY(40); 867 } 868 869 CSR_WRITE_4(sc, BGE_MI_COMM, BGE_MICMD_WRITE | BGE_MICOMM_BUSY | 870 BGE_MIPHY(phy) | BGE_MIREG(reg) | val); 871 872 for (i = 0; i < BGE_TIMEOUT; i++) { 873 DELAY(10); 874 if (!(CSR_READ_4(sc, BGE_MI_COMM) & BGE_MICOMM_BUSY)) { 875 DELAY(5); 876 CSR_READ_4(sc, BGE_MI_COMM); /* dummy read */ 877 break; 878 } 879 } 880 881 if (i == BGE_TIMEOUT) { 882 device_printf(sc->bge_dev, 883 "PHY write timed out (phy %d, reg %d, val %d)\n", 884 phy, reg, val); 885 return (0); 886 } 887 888 if (autopoll & BGE_MIMODE_AUTOPOLL) { 889 BGE_SETBIT(sc, BGE_MI_MODE, BGE_MIMODE_AUTOPOLL); 890 DELAY(40); 891 } 892 893 return (0); 894 } 895 896 static void 897 bge_miibus_statchg(device_t dev) 898 { 899 struct bge_softc *sc; 900 struct mii_data *mii; 901 sc = device_get_softc(dev); 902 mii = device_get_softc(sc->bge_miibus); 903 904 BGE_CLRBIT(sc, BGE_MAC_MODE, BGE_MACMODE_PORTMODE); 905 if (IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_T || 906 IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_SX) 907 BGE_SETBIT(sc, BGE_MAC_MODE, BGE_PORTMODE_GMII); 908 else 909 BGE_SETBIT(sc, BGE_MAC_MODE, BGE_PORTMODE_MII); 910 911 if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX) 912 BGE_CLRBIT(sc, BGE_MAC_MODE, BGE_MACMODE_HALF_DUPLEX); 913 else 914 BGE_SETBIT(sc, BGE_MAC_MODE, BGE_MACMODE_HALF_DUPLEX); 915 } 916 917 /* 918 * Intialize a standard receive ring descriptor. 919 */ 920 static int 921 bge_newbuf_std(struct bge_softc *sc, int i) 922 { 923 struct mbuf *m; 924 struct bge_rx_bd *r; 925 bus_dma_segment_t segs[1]; 926 bus_dmamap_t map; 927 int error, nsegs; 928 929 m = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR); 930 if (m == NULL) 931 return (ENOBUFS); 932 m->m_len = m->m_pkthdr.len = MCLBYTES; 933 if ((sc->bge_flags & BGE_FLAG_RX_ALIGNBUG) == 0) 934 m_adj(m, ETHER_ALIGN); 935 936 error = bus_dmamap_load_mbuf_sg(sc->bge_cdata.bge_rx_mtag, 937 sc->bge_cdata.bge_rx_std_sparemap, m, segs, &nsegs, 0); 938 if (error != 0) { 939 m_freem(m); 940 return (error); 941 } 942 if (sc->bge_cdata.bge_rx_std_chain[i] != NULL) { 943 bus_dmamap_sync(sc->bge_cdata.bge_rx_mtag, 944 sc->bge_cdata.bge_rx_std_dmamap[i], BUS_DMASYNC_POSTREAD); 945 bus_dmamap_unload(sc->bge_cdata.bge_rx_mtag, 946 sc->bge_cdata.bge_rx_std_dmamap[i]); 947 } 948 map = sc->bge_cdata.bge_rx_std_dmamap[i]; 949 sc->bge_cdata.bge_rx_std_dmamap[i] = sc->bge_cdata.bge_rx_std_sparemap; 950 sc->bge_cdata.bge_rx_std_sparemap = map; 951 sc->bge_cdata.bge_rx_std_chain[i] = m; 952 r = &sc->bge_ldata.bge_rx_std_ring[sc->bge_std]; 953 r->bge_addr.bge_addr_lo = BGE_ADDR_LO(segs[0].ds_addr); 954 r->bge_addr.bge_addr_hi = BGE_ADDR_HI(segs[0].ds_addr); 955 r->bge_flags = BGE_RXBDFLAG_END; 956 r->bge_len = segs[0].ds_len; 957 r->bge_idx = i; 958 959 bus_dmamap_sync(sc->bge_cdata.bge_rx_mtag, 960 sc->bge_cdata.bge_rx_std_dmamap[i], BUS_DMASYNC_PREREAD); 961 962 return (0); 963 } 964 965 /* 966 * Initialize a jumbo receive ring descriptor. This allocates 967 * a jumbo buffer from the pool managed internally by the driver. 968 */ 969 static int 970 bge_newbuf_jumbo(struct bge_softc *sc, int i) 971 { 972 bus_dma_segment_t segs[BGE_NSEG_JUMBO]; 973 bus_dmamap_t map; 974 struct bge_extrx_bd *r; 975 struct mbuf *m; 976 int error, nsegs; 977 978 MGETHDR(m, M_DONTWAIT, MT_DATA); 979 if (m == NULL) 980 return (ENOBUFS); 981 982 m_cljget(m, M_DONTWAIT, MJUM9BYTES); 983 if (!(m->m_flags & M_EXT)) { 984 m_freem(m); 985 return (ENOBUFS); 986 } 987 m->m_len = m->m_pkthdr.len = MJUM9BYTES; 988 if ((sc->bge_flags & BGE_FLAG_RX_ALIGNBUG) == 0) 989 m_adj(m, ETHER_ALIGN); 990 991 error = bus_dmamap_load_mbuf_sg(sc->bge_cdata.bge_mtag_jumbo, 992 sc->bge_cdata.bge_rx_jumbo_sparemap, m, segs, &nsegs, 0); 993 if (error != 0) { 994 m_freem(m); 995 return (error); 996 } 997 998 if (sc->bge_cdata.bge_rx_jumbo_chain[i] == NULL) { 999 bus_dmamap_sync(sc->bge_cdata.bge_mtag_jumbo, 1000 sc->bge_cdata.bge_rx_jumbo_dmamap[i], BUS_DMASYNC_POSTREAD); 1001 bus_dmamap_unload(sc->bge_cdata.bge_mtag_jumbo, 1002 sc->bge_cdata.bge_rx_jumbo_dmamap[i]); 1003 } 1004 map = sc->bge_cdata.bge_rx_jumbo_dmamap[i]; 1005 sc->bge_cdata.bge_rx_jumbo_dmamap[i] = 1006 sc->bge_cdata.bge_rx_jumbo_sparemap; 1007 sc->bge_cdata.bge_rx_jumbo_sparemap = map; 1008 sc->bge_cdata.bge_rx_jumbo_chain[i] = m; 1009 /* 1010 * Fill in the extended RX buffer descriptor. 1011 */ 1012 r = &sc->bge_ldata.bge_rx_jumbo_ring[sc->bge_jumbo]; 1013 r->bge_flags = BGE_RXBDFLAG_JUMBO_RING | BGE_RXBDFLAG_END; 1014 r->bge_idx = i; 1015 r->bge_len3 = r->bge_len2 = r->bge_len1 = 0; 1016 switch (nsegs) { 1017 case 4: 1018 r->bge_addr3.bge_addr_lo = BGE_ADDR_LO(segs[3].ds_addr); 1019 r->bge_addr3.bge_addr_hi = BGE_ADDR_HI(segs[3].ds_addr); 1020 r->bge_len3 = segs[3].ds_len; 1021 case 3: 1022 r->bge_addr2.bge_addr_lo = BGE_ADDR_LO(segs[2].ds_addr); 1023 r->bge_addr2.bge_addr_hi = BGE_ADDR_HI(segs[2].ds_addr); 1024 r->bge_len2 = segs[2].ds_len; 1025 case 2: 1026 r->bge_addr1.bge_addr_lo = BGE_ADDR_LO(segs[1].ds_addr); 1027 r->bge_addr1.bge_addr_hi = BGE_ADDR_HI(segs[1].ds_addr); 1028 r->bge_len1 = segs[1].ds_len; 1029 case 1: 1030 r->bge_addr0.bge_addr_lo = BGE_ADDR_LO(segs[0].ds_addr); 1031 r->bge_addr0.bge_addr_hi = BGE_ADDR_HI(segs[0].ds_addr); 1032 r->bge_len0 = segs[0].ds_len; 1033 break; 1034 default: 1035 panic("%s: %d segments\n", __func__, nsegs); 1036 } 1037 1038 bus_dmamap_sync(sc->bge_cdata.bge_mtag_jumbo, 1039 sc->bge_cdata.bge_rx_jumbo_dmamap[i], BUS_DMASYNC_PREREAD); 1040 1041 return (0); 1042 } 1043 1044 /* 1045 * The standard receive ring has 512 entries in it. At 2K per mbuf cluster, 1046 * that's 1MB or memory, which is a lot. For now, we fill only the first 1047 * 256 ring entries and hope that our CPU is fast enough to keep up with 1048 * the NIC. 1049 */ 1050 static int 1051 bge_init_rx_ring_std(struct bge_softc *sc) 1052 { 1053 int error, i; 1054 1055 bzero(sc->bge_ldata.bge_rx_std_ring, BGE_STD_RX_RING_SZ); 1056 sc->bge_std = 0; 1057 for (i = 0; i < BGE_SSLOTS; i++) { 1058 if ((error = bge_newbuf_std(sc, i)) != 0) 1059 return (error); 1060 BGE_INC(sc->bge_std, BGE_STD_RX_RING_CNT); 1061 }; 1062 1063 bus_dmamap_sync(sc->bge_cdata.bge_rx_std_ring_tag, 1064 sc->bge_cdata.bge_rx_std_ring_map, BUS_DMASYNC_PREWRITE); 1065 1066 sc->bge_std = i - 1; 1067 bge_writembx(sc, BGE_MBX_RX_STD_PROD_LO, sc->bge_std); 1068 1069 return (0); 1070 } 1071 1072 static void 1073 bge_free_rx_ring_std(struct bge_softc *sc) 1074 { 1075 int i; 1076 1077 for (i = 0; i < BGE_STD_RX_RING_CNT; i++) { 1078 if (sc->bge_cdata.bge_rx_std_chain[i] != NULL) { 1079 bus_dmamap_sync(sc->bge_cdata.bge_rx_mtag, 1080 sc->bge_cdata.bge_rx_std_dmamap[i], 1081 BUS_DMASYNC_POSTREAD); 1082 bus_dmamap_unload(sc->bge_cdata.bge_rx_mtag, 1083 sc->bge_cdata.bge_rx_std_dmamap[i]); 1084 m_freem(sc->bge_cdata.bge_rx_std_chain[i]); 1085 sc->bge_cdata.bge_rx_std_chain[i] = NULL; 1086 } 1087 bzero((char *)&sc->bge_ldata.bge_rx_std_ring[i], 1088 sizeof(struct bge_rx_bd)); 1089 } 1090 } 1091 1092 static int 1093 bge_init_rx_ring_jumbo(struct bge_softc *sc) 1094 { 1095 struct bge_rcb *rcb; 1096 int error, i; 1097 1098 bzero(sc->bge_ldata.bge_rx_jumbo_ring, BGE_JUMBO_RX_RING_SZ); 1099 sc->bge_jumbo = 0; 1100 for (i = 0; i < BGE_JUMBO_RX_RING_CNT; i++) { 1101 if ((error = bge_newbuf_jumbo(sc, i)) != 0) 1102 return (error); 1103 BGE_INC(sc->bge_jumbo, BGE_JUMBO_RX_RING_CNT); 1104 }; 1105 1106 bus_dmamap_sync(sc->bge_cdata.bge_rx_jumbo_ring_tag, 1107 sc->bge_cdata.bge_rx_jumbo_ring_map, BUS_DMASYNC_PREWRITE); 1108 1109 sc->bge_jumbo = i - 1; 1110 1111 rcb = &sc->bge_ldata.bge_info.bge_jumbo_rx_rcb; 1112 rcb->bge_maxlen_flags = BGE_RCB_MAXLEN_FLAGS(0, 1113 BGE_RCB_FLAG_USE_EXT_RX_BD); 1114 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_MAXLEN_FLAGS, rcb->bge_maxlen_flags); 1115 1116 bge_writembx(sc, BGE_MBX_RX_JUMBO_PROD_LO, sc->bge_jumbo); 1117 1118 return (0); 1119 } 1120 1121 static void 1122 bge_free_rx_ring_jumbo(struct bge_softc *sc) 1123 { 1124 int i; 1125 1126 for (i = 0; i < BGE_JUMBO_RX_RING_CNT; i++) { 1127 if (sc->bge_cdata.bge_rx_jumbo_chain[i] != NULL) { 1128 bus_dmamap_sync(sc->bge_cdata.bge_mtag_jumbo, 1129 sc->bge_cdata.bge_rx_jumbo_dmamap[i], 1130 BUS_DMASYNC_POSTREAD); 1131 bus_dmamap_unload(sc->bge_cdata.bge_mtag_jumbo, 1132 sc->bge_cdata.bge_rx_jumbo_dmamap[i]); 1133 m_freem(sc->bge_cdata.bge_rx_jumbo_chain[i]); 1134 sc->bge_cdata.bge_rx_jumbo_chain[i] = NULL; 1135 } 1136 bzero((char *)&sc->bge_ldata.bge_rx_jumbo_ring[i], 1137 sizeof(struct bge_extrx_bd)); 1138 } 1139 } 1140 1141 static void 1142 bge_free_tx_ring(struct bge_softc *sc) 1143 { 1144 int i; 1145 1146 if (sc->bge_ldata.bge_tx_ring == NULL) 1147 return; 1148 1149 for (i = 0; i < BGE_TX_RING_CNT; i++) { 1150 if (sc->bge_cdata.bge_tx_chain[i] != NULL) { 1151 bus_dmamap_sync(sc->bge_cdata.bge_tx_mtag, 1152 sc->bge_cdata.bge_tx_dmamap[i], 1153 BUS_DMASYNC_POSTWRITE); 1154 bus_dmamap_unload(sc->bge_cdata.bge_tx_mtag, 1155 sc->bge_cdata.bge_tx_dmamap[i]); 1156 m_freem(sc->bge_cdata.bge_tx_chain[i]); 1157 sc->bge_cdata.bge_tx_chain[i] = NULL; 1158 } 1159 bzero((char *)&sc->bge_ldata.bge_tx_ring[i], 1160 sizeof(struct bge_tx_bd)); 1161 } 1162 } 1163 1164 static int 1165 bge_init_tx_ring(struct bge_softc *sc) 1166 { 1167 sc->bge_txcnt = 0; 1168 sc->bge_tx_saved_considx = 0; 1169 1170 bzero(sc->bge_ldata.bge_tx_ring, BGE_TX_RING_SZ); 1171 bus_dmamap_sync(sc->bge_cdata.bge_tx_ring_tag, 1172 sc->bge_cdata.bge_tx_ring_map, BUS_DMASYNC_PREWRITE); 1173 1174 /* Initialize transmit producer index for host-memory send ring. */ 1175 sc->bge_tx_prodidx = 0; 1176 bge_writembx(sc, BGE_MBX_TX_HOST_PROD0_LO, sc->bge_tx_prodidx); 1177 1178 /* 5700 b2 errata */ 1179 if (sc->bge_chiprev == BGE_CHIPREV_5700_BX) 1180 bge_writembx(sc, BGE_MBX_TX_HOST_PROD0_LO, sc->bge_tx_prodidx); 1181 1182 /* NIC-memory send ring not used; initialize to zero. */ 1183 bge_writembx(sc, BGE_MBX_TX_NIC_PROD0_LO, 0); 1184 /* 5700 b2 errata */ 1185 if (sc->bge_chiprev == BGE_CHIPREV_5700_BX) 1186 bge_writembx(sc, BGE_MBX_TX_NIC_PROD0_LO, 0); 1187 1188 return (0); 1189 } 1190 1191 static void 1192 bge_setpromisc(struct bge_softc *sc) 1193 { 1194 struct ifnet *ifp; 1195 1196 BGE_LOCK_ASSERT(sc); 1197 1198 ifp = sc->bge_ifp; 1199 1200 /* Enable or disable promiscuous mode as needed. */ 1201 if (ifp->if_flags & IFF_PROMISC) 1202 BGE_SETBIT(sc, BGE_RX_MODE, BGE_RXMODE_RX_PROMISC); 1203 else 1204 BGE_CLRBIT(sc, BGE_RX_MODE, BGE_RXMODE_RX_PROMISC); 1205 } 1206 1207 static void 1208 bge_setmulti(struct bge_softc *sc) 1209 { 1210 struct ifnet *ifp; 1211 struct ifmultiaddr *ifma; 1212 uint32_t hashes[4] = { 0, 0, 0, 0 }; 1213 int h, i; 1214 1215 BGE_LOCK_ASSERT(sc); 1216 1217 ifp = sc->bge_ifp; 1218 1219 if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) { 1220 for (i = 0; i < 4; i++) 1221 CSR_WRITE_4(sc, BGE_MAR0 + (i * 4), 0xFFFFFFFF); 1222 return; 1223 } 1224 1225 /* First, zot all the existing filters. */ 1226 for (i = 0; i < 4; i++) 1227 CSR_WRITE_4(sc, BGE_MAR0 + (i * 4), 0); 1228 1229 /* Now program new ones. */ 1230 if_maddr_rlock(ifp); 1231 TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { 1232 if (ifma->ifma_addr->sa_family != AF_LINK) 1233 continue; 1234 h = ether_crc32_le(LLADDR((struct sockaddr_dl *) 1235 ifma->ifma_addr), ETHER_ADDR_LEN) & 0x7F; 1236 hashes[(h & 0x60) >> 5] |= 1 << (h & 0x1F); 1237 } 1238 if_maddr_runlock(ifp); 1239 1240 for (i = 0; i < 4; i++) 1241 CSR_WRITE_4(sc, BGE_MAR0 + (i * 4), hashes[i]); 1242 } 1243 1244 static void 1245 bge_setvlan(struct bge_softc *sc) 1246 { 1247 struct ifnet *ifp; 1248 1249 BGE_LOCK_ASSERT(sc); 1250 1251 ifp = sc->bge_ifp; 1252 1253 /* Enable or disable VLAN tag stripping as needed. */ 1254 if (ifp->if_capenable & IFCAP_VLAN_HWTAGGING) 1255 BGE_CLRBIT(sc, BGE_RX_MODE, BGE_RXMODE_RX_KEEP_VLAN_DIAG); 1256 else 1257 BGE_SETBIT(sc, BGE_RX_MODE, BGE_RXMODE_RX_KEEP_VLAN_DIAG); 1258 } 1259 1260 static void 1261 bge_sig_pre_reset(sc, type) 1262 struct bge_softc *sc; 1263 int type; 1264 { 1265 /* 1266 * Some chips don't like this so only do this if ASF is enabled 1267 */ 1268 if (sc->bge_asf_mode) 1269 bge_writemem_ind(sc, BGE_SOFTWARE_GENCOMM, BGE_MAGIC_NUMBER); 1270 1271 if (sc->bge_asf_mode & ASF_NEW_HANDSHAKE) { 1272 switch (type) { 1273 case BGE_RESET_START: 1274 bge_writemem_ind(sc, BGE_SDI_STATUS, 0x1); /* START */ 1275 break; 1276 case BGE_RESET_STOP: 1277 bge_writemem_ind(sc, BGE_SDI_STATUS, 0x2); /* UNLOAD */ 1278 break; 1279 } 1280 } 1281 } 1282 1283 static void 1284 bge_sig_post_reset(sc, type) 1285 struct bge_softc *sc; 1286 int type; 1287 { 1288 if (sc->bge_asf_mode & ASF_NEW_HANDSHAKE) { 1289 switch (type) { 1290 case BGE_RESET_START: 1291 bge_writemem_ind(sc, BGE_SDI_STATUS, 0x80000001); 1292 /* START DONE */ 1293 break; 1294 case BGE_RESET_STOP: 1295 bge_writemem_ind(sc, BGE_SDI_STATUS, 0x80000002); 1296 break; 1297 } 1298 } 1299 } 1300 1301 static void 1302 bge_sig_legacy(sc, type) 1303 struct bge_softc *sc; 1304 int type; 1305 { 1306 if (sc->bge_asf_mode) { 1307 switch (type) { 1308 case BGE_RESET_START: 1309 bge_writemem_ind(sc, BGE_SDI_STATUS, 0x1); /* START */ 1310 break; 1311 case BGE_RESET_STOP: 1312 bge_writemem_ind(sc, BGE_SDI_STATUS, 0x2); /* UNLOAD */ 1313 break; 1314 } 1315 } 1316 } 1317 1318 void bge_stop_fw(struct bge_softc *); 1319 void 1320 bge_stop_fw(sc) 1321 struct bge_softc *sc; 1322 { 1323 int i; 1324 1325 if (sc->bge_asf_mode) { 1326 bge_writemem_ind(sc, BGE_SOFTWARE_GENCOMM_FW, BGE_FW_PAUSE); 1327 CSR_WRITE_4(sc, BGE_CPU_EVENT, 1328 CSR_READ_4(sc, BGE_CPU_EVENT) | (1 << 14)); 1329 1330 for (i = 0; i < 100; i++ ) { 1331 if (!(CSR_READ_4(sc, BGE_CPU_EVENT) & (1 << 14))) 1332 break; 1333 DELAY(10); 1334 } 1335 } 1336 } 1337 1338 /* 1339 * Do endian, PCI and DMA initialization. 1340 */ 1341 static int 1342 bge_chipinit(struct bge_softc *sc) 1343 { 1344 uint32_t dma_rw_ctl; 1345 int i; 1346 1347 /* Set endianness before we access any non-PCI registers. */ 1348 pci_write_config(sc->bge_dev, BGE_PCI_MISC_CTL, BGE_INIT, 4); 1349 1350 /* Clear the MAC control register */ 1351 CSR_WRITE_4(sc, BGE_MAC_MODE, 0); 1352 1353 /* 1354 * Clear the MAC statistics block in the NIC's 1355 * internal memory. 1356 */ 1357 for (i = BGE_STATS_BLOCK; 1358 i < BGE_STATS_BLOCK_END + 1; i += sizeof(uint32_t)) 1359 BGE_MEMWIN_WRITE(sc, i, 0); 1360 1361 for (i = BGE_STATUS_BLOCK; 1362 i < BGE_STATUS_BLOCK_END + 1; i += sizeof(uint32_t)) 1363 BGE_MEMWIN_WRITE(sc, i, 0); 1364 1365 /* 1366 * Set up the PCI DMA control register. 1367 */ 1368 dma_rw_ctl = BGE_PCIDMARWCTL_RD_CMD_SHIFT(6) | 1369 BGE_PCIDMARWCTL_WR_CMD_SHIFT(7); 1370 if (sc->bge_flags & BGE_FLAG_PCIE) { 1371 /* Read watermark not used, 128 bytes for write. */ 1372 dma_rw_ctl |= BGE_PCIDMARWCTL_WR_WAT_SHIFT(3); 1373 } else if (sc->bge_flags & BGE_FLAG_PCIX) { 1374 if (BGE_IS_5714_FAMILY(sc)) { 1375 /* 256 bytes for read and write. */ 1376 dma_rw_ctl |= BGE_PCIDMARWCTL_RD_WAT_SHIFT(2) | 1377 BGE_PCIDMARWCTL_WR_WAT_SHIFT(2); 1378 dma_rw_ctl |= (sc->bge_asicrev == BGE_ASICREV_BCM5780) ? 1379 BGE_PCIDMARWCTL_ONEDMA_ATONCE_GLOBAL : 1380 BGE_PCIDMARWCTL_ONEDMA_ATONCE_LOCAL; 1381 } else if (sc->bge_asicrev == BGE_ASICREV_BCM5704) { 1382 /* 1536 bytes for read, 384 bytes for write. */ 1383 dma_rw_ctl |= BGE_PCIDMARWCTL_RD_WAT_SHIFT(7) | 1384 BGE_PCIDMARWCTL_WR_WAT_SHIFT(3); 1385 } else { 1386 /* 384 bytes for read and write. */ 1387 dma_rw_ctl |= BGE_PCIDMARWCTL_RD_WAT_SHIFT(3) | 1388 BGE_PCIDMARWCTL_WR_WAT_SHIFT(3) | 1389 0x0F; 1390 } 1391 if (sc->bge_asicrev == BGE_ASICREV_BCM5703 || 1392 sc->bge_asicrev == BGE_ASICREV_BCM5704) { 1393 uint32_t tmp; 1394 1395 /* Set ONE_DMA_AT_ONCE for hardware workaround. */ 1396 tmp = CSR_READ_4(sc, BGE_PCI_CLKCTL) & 0x1F; 1397 if (tmp == 6 || tmp == 7) 1398 dma_rw_ctl |= 1399 BGE_PCIDMARWCTL_ONEDMA_ATONCE_GLOBAL; 1400 1401 /* Set PCI-X DMA write workaround. */ 1402 dma_rw_ctl |= BGE_PCIDMARWCTL_ASRT_ALL_BE; 1403 } 1404 } else { 1405 /* Conventional PCI bus: 256 bytes for read and write. */ 1406 dma_rw_ctl |= BGE_PCIDMARWCTL_RD_WAT_SHIFT(7) | 1407 BGE_PCIDMARWCTL_WR_WAT_SHIFT(7); 1408 1409 if (sc->bge_asicrev != BGE_ASICREV_BCM5705 && 1410 sc->bge_asicrev != BGE_ASICREV_BCM5750) 1411 dma_rw_ctl |= 0x0F; 1412 } 1413 if (sc->bge_asicrev == BGE_ASICREV_BCM5700 || 1414 sc->bge_asicrev == BGE_ASICREV_BCM5701) 1415 dma_rw_ctl |= BGE_PCIDMARWCTL_USE_MRM | 1416 BGE_PCIDMARWCTL_ASRT_ALL_BE; 1417 if (sc->bge_asicrev == BGE_ASICREV_BCM5703 || 1418 sc->bge_asicrev == BGE_ASICREV_BCM5704) 1419 dma_rw_ctl &= ~BGE_PCIDMARWCTL_MINDMA; 1420 pci_write_config(sc->bge_dev, BGE_PCI_DMA_RW_CTL, dma_rw_ctl, 4); 1421 1422 /* 1423 * Set up general mode register. 1424 */ 1425 CSR_WRITE_4(sc, BGE_MODE_CTL, BGE_DMA_SWAP_OPTIONS | 1426 BGE_MODECTL_MAC_ATTN_INTR | BGE_MODECTL_HOST_SEND_BDS | 1427 BGE_MODECTL_TX_NO_PHDR_CSUM); 1428 1429 /* 1430 * BCM5701 B5 have a bug causing data corruption when using 1431 * 64-bit DMA reads, which can be terminated early and then 1432 * completed later as 32-bit accesses, in combination with 1433 * certain bridges. 1434 */ 1435 if (sc->bge_asicrev == BGE_ASICREV_BCM5701 && 1436 sc->bge_chipid == BGE_CHIPID_BCM5701_B5) 1437 BGE_SETBIT(sc, BGE_MODE_CTL, BGE_MODECTL_FORCE_PCI32); 1438 1439 /* 1440 * Tell the firmware the driver is running 1441 */ 1442 if (sc->bge_asf_mode & ASF_STACKUP) 1443 BGE_SETBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP); 1444 1445 /* 1446 * Disable memory write invalidate. Apparently it is not supported 1447 * properly by these devices. Also ensure that INTx isn't disabled, 1448 * as these chips need it even when using MSI. 1449 */ 1450 PCI_CLRBIT(sc->bge_dev, BGE_PCI_CMD, 1451 PCIM_CMD_INTxDIS | PCIM_CMD_MWIEN, 4); 1452 1453 /* Set the timer prescaler (always 66Mhz) */ 1454 CSR_WRITE_4(sc, BGE_MISC_CFG, BGE_32BITTIME_66MHZ); 1455 1456 /* XXX: The Linux tg3 driver does this at the start of brgphy_reset. */ 1457 if (sc->bge_asicrev == BGE_ASICREV_BCM5906) { 1458 DELAY(40); /* XXX */ 1459 1460 /* Put PHY into ready state */ 1461 BGE_CLRBIT(sc, BGE_MISC_CFG, BGE_MISCCFG_EPHY_IDDQ); 1462 CSR_READ_4(sc, BGE_MISC_CFG); /* Flush */ 1463 DELAY(40); 1464 } 1465 1466 return (0); 1467 } 1468 1469 static int 1470 bge_blockinit(struct bge_softc *sc) 1471 { 1472 struct bge_rcb *rcb; 1473 bus_size_t vrcb; 1474 bge_hostaddr taddr; 1475 uint32_t val; 1476 int i; 1477 1478 /* 1479 * Initialize the memory window pointer register so that 1480 * we can access the first 32K of internal NIC RAM. This will 1481 * allow us to set up the TX send ring RCBs and the RX return 1482 * ring RCBs, plus other things which live in NIC memory. 1483 */ 1484 CSR_WRITE_4(sc, BGE_PCI_MEMWIN_BASEADDR, 0); 1485 1486 /* Note: the BCM5704 has a smaller mbuf space than other chips. */ 1487 1488 if (!(BGE_IS_5705_PLUS(sc))) { 1489 /* Configure mbuf memory pool */ 1490 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_BASEADDR, BGE_BUFFPOOL_1); 1491 if (sc->bge_asicrev == BGE_ASICREV_BCM5704) 1492 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_LEN, 0x10000); 1493 else 1494 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_LEN, 0x18000); 1495 1496 /* Configure DMA resource pool */ 1497 CSR_WRITE_4(sc, BGE_BMAN_DMA_DESCPOOL_BASEADDR, 1498 BGE_DMA_DESCRIPTORS); 1499 CSR_WRITE_4(sc, BGE_BMAN_DMA_DESCPOOL_LEN, 0x2000); 1500 } 1501 1502 /* Configure mbuf pool watermarks */ 1503 if (!BGE_IS_5705_PLUS(sc)) { 1504 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_READDMA_LOWAT, 0x50); 1505 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x20); 1506 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_HIWAT, 0x60); 1507 } else if (sc->bge_asicrev == BGE_ASICREV_BCM5906) { 1508 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_READDMA_LOWAT, 0x0); 1509 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x04); 1510 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_HIWAT, 0x10); 1511 } else { 1512 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_READDMA_LOWAT, 0x0); 1513 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x10); 1514 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_HIWAT, 0x60); 1515 } 1516 1517 /* Configure DMA resource watermarks */ 1518 CSR_WRITE_4(sc, BGE_BMAN_DMA_DESCPOOL_LOWAT, 5); 1519 CSR_WRITE_4(sc, BGE_BMAN_DMA_DESCPOOL_HIWAT, 10); 1520 1521 /* Enable buffer manager */ 1522 if (!(BGE_IS_5705_PLUS(sc))) { 1523 CSR_WRITE_4(sc, BGE_BMAN_MODE, 1524 BGE_BMANMODE_ENABLE | BGE_BMANMODE_LOMBUF_ATTN); 1525 1526 /* Poll for buffer manager start indication */ 1527 for (i = 0; i < BGE_TIMEOUT; i++) { 1528 DELAY(10); 1529 if (CSR_READ_4(sc, BGE_BMAN_MODE) & BGE_BMANMODE_ENABLE) 1530 break; 1531 } 1532 1533 if (i == BGE_TIMEOUT) { 1534 device_printf(sc->bge_dev, 1535 "buffer manager failed to start\n"); 1536 return (ENXIO); 1537 } 1538 } 1539 1540 /* Enable flow-through queues */ 1541 CSR_WRITE_4(sc, BGE_FTQ_RESET, 0xFFFFFFFF); 1542 CSR_WRITE_4(sc, BGE_FTQ_RESET, 0); 1543 1544 /* Wait until queue initialization is complete */ 1545 for (i = 0; i < BGE_TIMEOUT; i++) { 1546 DELAY(10); 1547 if (CSR_READ_4(sc, BGE_FTQ_RESET) == 0) 1548 break; 1549 } 1550 1551 if (i == BGE_TIMEOUT) { 1552 device_printf(sc->bge_dev, "flow-through queue init failed\n"); 1553 return (ENXIO); 1554 } 1555 1556 /* Initialize the standard RX ring control block */ 1557 rcb = &sc->bge_ldata.bge_info.bge_std_rx_rcb; 1558 rcb->bge_hostaddr.bge_addr_lo = 1559 BGE_ADDR_LO(sc->bge_ldata.bge_rx_std_ring_paddr); 1560 rcb->bge_hostaddr.bge_addr_hi = 1561 BGE_ADDR_HI(sc->bge_ldata.bge_rx_std_ring_paddr); 1562 bus_dmamap_sync(sc->bge_cdata.bge_rx_std_ring_tag, 1563 sc->bge_cdata.bge_rx_std_ring_map, BUS_DMASYNC_PREREAD); 1564 if (BGE_IS_5705_PLUS(sc)) 1565 rcb->bge_maxlen_flags = BGE_RCB_MAXLEN_FLAGS(512, 0); 1566 else 1567 rcb->bge_maxlen_flags = 1568 BGE_RCB_MAXLEN_FLAGS(BGE_MAX_FRAMELEN, 0); 1569 rcb->bge_nicaddr = BGE_STD_RX_RINGS; 1570 CSR_WRITE_4(sc, BGE_RX_STD_RCB_HADDR_HI, rcb->bge_hostaddr.bge_addr_hi); 1571 CSR_WRITE_4(sc, BGE_RX_STD_RCB_HADDR_LO, rcb->bge_hostaddr.bge_addr_lo); 1572 1573 CSR_WRITE_4(sc, BGE_RX_STD_RCB_MAXLEN_FLAGS, rcb->bge_maxlen_flags); 1574 CSR_WRITE_4(sc, BGE_RX_STD_RCB_NICADDR, rcb->bge_nicaddr); 1575 1576 /* 1577 * Initialize the jumbo RX ring control block 1578 * We set the 'ring disabled' bit in the flags 1579 * field until we're actually ready to start 1580 * using this ring (i.e. once we set the MTU 1581 * high enough to require it). 1582 */ 1583 if (BGE_IS_JUMBO_CAPABLE(sc)) { 1584 rcb = &sc->bge_ldata.bge_info.bge_jumbo_rx_rcb; 1585 1586 rcb->bge_hostaddr.bge_addr_lo = 1587 BGE_ADDR_LO(sc->bge_ldata.bge_rx_jumbo_ring_paddr); 1588 rcb->bge_hostaddr.bge_addr_hi = 1589 BGE_ADDR_HI(sc->bge_ldata.bge_rx_jumbo_ring_paddr); 1590 bus_dmamap_sync(sc->bge_cdata.bge_rx_jumbo_ring_tag, 1591 sc->bge_cdata.bge_rx_jumbo_ring_map, 1592 BUS_DMASYNC_PREREAD); 1593 rcb->bge_maxlen_flags = BGE_RCB_MAXLEN_FLAGS(0, 1594 BGE_RCB_FLAG_USE_EXT_RX_BD | BGE_RCB_FLAG_RING_DISABLED); 1595 rcb->bge_nicaddr = BGE_JUMBO_RX_RINGS; 1596 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_HADDR_HI, 1597 rcb->bge_hostaddr.bge_addr_hi); 1598 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_HADDR_LO, 1599 rcb->bge_hostaddr.bge_addr_lo); 1600 1601 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_MAXLEN_FLAGS, 1602 rcb->bge_maxlen_flags); 1603 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_NICADDR, rcb->bge_nicaddr); 1604 1605 /* Set up dummy disabled mini ring RCB */ 1606 rcb = &sc->bge_ldata.bge_info.bge_mini_rx_rcb; 1607 rcb->bge_maxlen_flags = 1608 BGE_RCB_MAXLEN_FLAGS(0, BGE_RCB_FLAG_RING_DISABLED); 1609 CSR_WRITE_4(sc, BGE_RX_MINI_RCB_MAXLEN_FLAGS, 1610 rcb->bge_maxlen_flags); 1611 } 1612 1613 /* 1614 * Set the BD ring replentish thresholds. The recommended 1615 * values are 1/8th the number of descriptors allocated to 1616 * each ring. 1617 * XXX The 5754 requires a lower threshold, so it might be a 1618 * requirement of all 575x family chips. The Linux driver sets 1619 * the lower threshold for all 5705 family chips as well, but there 1620 * are reports that it might not need to be so strict. 1621 * 1622 * XXX Linux does some extra fiddling here for the 5906 parts as 1623 * well. 1624 */ 1625 if (BGE_IS_5705_PLUS(sc)) 1626 val = 8; 1627 else 1628 val = BGE_STD_RX_RING_CNT / 8; 1629 CSR_WRITE_4(sc, BGE_RBDI_STD_REPL_THRESH, val); 1630 if (BGE_IS_JUMBO_CAPABLE(sc)) 1631 CSR_WRITE_4(sc, BGE_RBDI_JUMBO_REPL_THRESH, 1632 BGE_JUMBO_RX_RING_CNT/8); 1633 1634 /* 1635 * Disable all unused send rings by setting the 'ring disabled' 1636 * bit in the flags field of all the TX send ring control blocks. 1637 * These are located in NIC memory. 1638 */ 1639 vrcb = BGE_MEMWIN_START + BGE_SEND_RING_RCB; 1640 for (i = 0; i < BGE_TX_RINGS_EXTSSRAM_MAX; i++) { 1641 RCB_WRITE_4(sc, vrcb, bge_maxlen_flags, 1642 BGE_RCB_MAXLEN_FLAGS(0, BGE_RCB_FLAG_RING_DISABLED)); 1643 RCB_WRITE_4(sc, vrcb, bge_nicaddr, 0); 1644 vrcb += sizeof(struct bge_rcb); 1645 } 1646 1647 /* Configure TX RCB 0 (we use only the first ring) */ 1648 vrcb = BGE_MEMWIN_START + BGE_SEND_RING_RCB; 1649 BGE_HOSTADDR(taddr, sc->bge_ldata.bge_tx_ring_paddr); 1650 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_hi, taddr.bge_addr_hi); 1651 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_lo, taddr.bge_addr_lo); 1652 RCB_WRITE_4(sc, vrcb, bge_nicaddr, 1653 BGE_NIC_TXRING_ADDR(0, BGE_TX_RING_CNT)); 1654 if (!(BGE_IS_5705_PLUS(sc))) 1655 RCB_WRITE_4(sc, vrcb, bge_maxlen_flags, 1656 BGE_RCB_MAXLEN_FLAGS(BGE_TX_RING_CNT, 0)); 1657 1658 /* Disable all unused RX return rings */ 1659 vrcb = BGE_MEMWIN_START + BGE_RX_RETURN_RING_RCB; 1660 for (i = 0; i < BGE_RX_RINGS_MAX; i++) { 1661 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_hi, 0); 1662 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_lo, 0); 1663 RCB_WRITE_4(sc, vrcb, bge_maxlen_flags, 1664 BGE_RCB_MAXLEN_FLAGS(sc->bge_return_ring_cnt, 1665 BGE_RCB_FLAG_RING_DISABLED)); 1666 RCB_WRITE_4(sc, vrcb, bge_nicaddr, 0); 1667 bge_writembx(sc, BGE_MBX_RX_CONS0_LO + 1668 (i * (sizeof(uint64_t))), 0); 1669 vrcb += sizeof(struct bge_rcb); 1670 } 1671 1672 /* Initialize RX ring indexes */ 1673 bge_writembx(sc, BGE_MBX_RX_STD_PROD_LO, 0); 1674 if (BGE_IS_JUMBO_CAPABLE(sc)) 1675 bge_writembx(sc, BGE_MBX_RX_JUMBO_PROD_LO, 0); 1676 if (sc->bge_asicrev == BGE_ASICREV_BCM5700) 1677 bge_writembx(sc, BGE_MBX_RX_MINI_PROD_LO, 0); 1678 1679 /* 1680 * Set up RX return ring 0 1681 * Note that the NIC address for RX return rings is 0x00000000. 1682 * The return rings live entirely within the host, so the 1683 * nicaddr field in the RCB isn't used. 1684 */ 1685 vrcb = BGE_MEMWIN_START + BGE_RX_RETURN_RING_RCB; 1686 BGE_HOSTADDR(taddr, sc->bge_ldata.bge_rx_return_ring_paddr); 1687 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_hi, taddr.bge_addr_hi); 1688 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_lo, taddr.bge_addr_lo); 1689 RCB_WRITE_4(sc, vrcb, bge_nicaddr, 0x00000000); 1690 RCB_WRITE_4(sc, vrcb, bge_maxlen_flags, 1691 BGE_RCB_MAXLEN_FLAGS(sc->bge_return_ring_cnt, 0)); 1692 1693 /* Set random backoff seed for TX */ 1694 CSR_WRITE_4(sc, BGE_TX_RANDOM_BACKOFF, 1695 IF_LLADDR(sc->bge_ifp)[0] + IF_LLADDR(sc->bge_ifp)[1] + 1696 IF_LLADDR(sc->bge_ifp)[2] + IF_LLADDR(sc->bge_ifp)[3] + 1697 IF_LLADDR(sc->bge_ifp)[4] + IF_LLADDR(sc->bge_ifp)[5] + 1698 BGE_TX_BACKOFF_SEED_MASK); 1699 1700 /* Set inter-packet gap */ 1701 CSR_WRITE_4(sc, BGE_TX_LENGTHS, 0x2620); 1702 1703 /* 1704 * Specify which ring to use for packets that don't match 1705 * any RX rules. 1706 */ 1707 CSR_WRITE_4(sc, BGE_RX_RULES_CFG, 0x08); 1708 1709 /* 1710 * Configure number of RX lists. One interrupt distribution 1711 * list, sixteen active lists, one bad frames class. 1712 */ 1713 CSR_WRITE_4(sc, BGE_RXLP_CFG, 0x181); 1714 1715 /* Inialize RX list placement stats mask. */ 1716 CSR_WRITE_4(sc, BGE_RXLP_STATS_ENABLE_MASK, 0x007FFFFF); 1717 CSR_WRITE_4(sc, BGE_RXLP_STATS_CTL, 0x1); 1718 1719 /* Disable host coalescing until we get it set up */ 1720 CSR_WRITE_4(sc, BGE_HCC_MODE, 0x00000000); 1721 1722 /* Poll to make sure it's shut down. */ 1723 for (i = 0; i < BGE_TIMEOUT; i++) { 1724 DELAY(10); 1725 if (!(CSR_READ_4(sc, BGE_HCC_MODE) & BGE_HCCMODE_ENABLE)) 1726 break; 1727 } 1728 1729 if (i == BGE_TIMEOUT) { 1730 device_printf(sc->bge_dev, 1731 "host coalescing engine failed to idle\n"); 1732 return (ENXIO); 1733 } 1734 1735 /* Set up host coalescing defaults */ 1736 CSR_WRITE_4(sc, BGE_HCC_RX_COAL_TICKS, sc->bge_rx_coal_ticks); 1737 CSR_WRITE_4(sc, BGE_HCC_TX_COAL_TICKS, sc->bge_tx_coal_ticks); 1738 CSR_WRITE_4(sc, BGE_HCC_RX_MAX_COAL_BDS, sc->bge_rx_max_coal_bds); 1739 CSR_WRITE_4(sc, BGE_HCC_TX_MAX_COAL_BDS, sc->bge_tx_max_coal_bds); 1740 if (!(BGE_IS_5705_PLUS(sc))) { 1741 CSR_WRITE_4(sc, BGE_HCC_RX_COAL_TICKS_INT, 0); 1742 CSR_WRITE_4(sc, BGE_HCC_TX_COAL_TICKS_INT, 0); 1743 } 1744 CSR_WRITE_4(sc, BGE_HCC_RX_MAX_COAL_BDS_INT, 1); 1745 CSR_WRITE_4(sc, BGE_HCC_TX_MAX_COAL_BDS_INT, 1); 1746 1747 /* Set up address of statistics block */ 1748 if (!(BGE_IS_5705_PLUS(sc))) { 1749 CSR_WRITE_4(sc, BGE_HCC_STATS_ADDR_HI, 1750 BGE_ADDR_HI(sc->bge_ldata.bge_stats_paddr)); 1751 CSR_WRITE_4(sc, BGE_HCC_STATS_ADDR_LO, 1752 BGE_ADDR_LO(sc->bge_ldata.bge_stats_paddr)); 1753 CSR_WRITE_4(sc, BGE_HCC_STATS_BASEADDR, BGE_STATS_BLOCK); 1754 CSR_WRITE_4(sc, BGE_HCC_STATUSBLK_BASEADDR, BGE_STATUS_BLOCK); 1755 CSR_WRITE_4(sc, BGE_HCC_STATS_TICKS, sc->bge_stat_ticks); 1756 } 1757 1758 /* Set up address of status block */ 1759 CSR_WRITE_4(sc, BGE_HCC_STATUSBLK_ADDR_HI, 1760 BGE_ADDR_HI(sc->bge_ldata.bge_status_block_paddr)); 1761 CSR_WRITE_4(sc, BGE_HCC_STATUSBLK_ADDR_LO, 1762 BGE_ADDR_LO(sc->bge_ldata.bge_status_block_paddr)); 1763 sc->bge_ldata.bge_status_block->bge_idx[0].bge_rx_prod_idx = 0; 1764 sc->bge_ldata.bge_status_block->bge_idx[0].bge_tx_cons_idx = 0; 1765 1766 /* Set up status block size. */ 1767 if (sc->bge_asicrev == BGE_ASICREV_BCM5700 && 1768 sc->bge_chipid != BGE_CHIPID_BCM5700_C0) 1769 val = BGE_STATBLKSZ_FULL; 1770 else 1771 val = BGE_STATBLKSZ_32BYTE; 1772 1773 /* Turn on host coalescing state machine */ 1774 CSR_WRITE_4(sc, BGE_HCC_MODE, val | BGE_HCCMODE_ENABLE); 1775 1776 /* Turn on RX BD completion state machine and enable attentions */ 1777 CSR_WRITE_4(sc, BGE_RBDC_MODE, 1778 BGE_RBDCMODE_ENABLE | BGE_RBDCMODE_ATTN); 1779 1780 /* Turn on RX list placement state machine */ 1781 CSR_WRITE_4(sc, BGE_RXLP_MODE, BGE_RXLPMODE_ENABLE); 1782 1783 /* Turn on RX list selector state machine. */ 1784 if (!(BGE_IS_5705_PLUS(sc))) 1785 CSR_WRITE_4(sc, BGE_RXLS_MODE, BGE_RXLSMODE_ENABLE); 1786 1787 val = BGE_MACMODE_TXDMA_ENB | BGE_MACMODE_RXDMA_ENB | 1788 BGE_MACMODE_RX_STATS_CLEAR | BGE_MACMODE_TX_STATS_CLEAR | 1789 BGE_MACMODE_RX_STATS_ENB | BGE_MACMODE_TX_STATS_ENB | 1790 BGE_MACMODE_FRMHDR_DMA_ENB; 1791 1792 if (sc->bge_flags & BGE_FLAG_TBI) 1793 val |= BGE_PORTMODE_TBI; 1794 else if (sc->bge_flags & BGE_FLAG_MII_SERDES) 1795 val |= BGE_PORTMODE_GMII; 1796 else 1797 val |= BGE_PORTMODE_MII; 1798 1799 /* Turn on DMA, clear stats */ 1800 CSR_WRITE_4(sc, BGE_MAC_MODE, val); 1801 1802 /* Set misc. local control, enable interrupts on attentions */ 1803 CSR_WRITE_4(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_INTR_ONATTN); 1804 1805 #ifdef notdef 1806 /* Assert GPIO pins for PHY reset */ 1807 BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_MISCIO_OUT0 | 1808 BGE_MLC_MISCIO_OUT1 | BGE_MLC_MISCIO_OUT2); 1809 BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_MISCIO_OUTEN0 | 1810 BGE_MLC_MISCIO_OUTEN1 | BGE_MLC_MISCIO_OUTEN2); 1811 #endif 1812 1813 /* Turn on DMA completion state machine */ 1814 if (!(BGE_IS_5705_PLUS(sc))) 1815 CSR_WRITE_4(sc, BGE_DMAC_MODE, BGE_DMACMODE_ENABLE); 1816 1817 val = BGE_WDMAMODE_ENABLE | BGE_WDMAMODE_ALL_ATTNS; 1818 1819 /* Enable host coalescing bug fix. */ 1820 if (BGE_IS_5755_PLUS(sc)) 1821 val |= BGE_WDMAMODE_STATUS_TAG_FIX; 1822 1823 /* Turn on write DMA state machine */ 1824 CSR_WRITE_4(sc, BGE_WDMA_MODE, val); 1825 DELAY(40); 1826 1827 /* Turn on read DMA state machine */ 1828 val = BGE_RDMAMODE_ENABLE | BGE_RDMAMODE_ALL_ATTNS; 1829 if (sc->bge_asicrev == BGE_ASICREV_BCM5784 || 1830 sc->bge_asicrev == BGE_ASICREV_BCM5785 || 1831 sc->bge_asicrev == BGE_ASICREV_BCM57780) 1832 val |= BGE_RDMAMODE_BD_SBD_CRPT_ATTN | 1833 BGE_RDMAMODE_MBUF_RBD_CRPT_ATTN | 1834 BGE_RDMAMODE_MBUF_SBD_CRPT_ATTN; 1835 if (sc->bge_flags & BGE_FLAG_PCIE) 1836 val |= BGE_RDMAMODE_FIFO_LONG_BURST; 1837 if (sc->bge_flags & BGE_FLAG_TSO) 1838 val |= BGE_RDMAMODE_TSO4_ENABLE; 1839 CSR_WRITE_4(sc, BGE_RDMA_MODE, val); 1840 DELAY(40); 1841 1842 /* Turn on RX data completion state machine */ 1843 CSR_WRITE_4(sc, BGE_RDC_MODE, BGE_RDCMODE_ENABLE); 1844 1845 /* Turn on RX BD initiator state machine */ 1846 CSR_WRITE_4(sc, BGE_RBDI_MODE, BGE_RBDIMODE_ENABLE); 1847 1848 /* Turn on RX data and RX BD initiator state machine */ 1849 CSR_WRITE_4(sc, BGE_RDBDI_MODE, BGE_RDBDIMODE_ENABLE); 1850 1851 /* Turn on Mbuf cluster free state machine */ 1852 if (!(BGE_IS_5705_PLUS(sc))) 1853 CSR_WRITE_4(sc, BGE_MBCF_MODE, BGE_MBCFMODE_ENABLE); 1854 1855 /* Turn on send BD completion state machine */ 1856 CSR_WRITE_4(sc, BGE_SBDC_MODE, BGE_SBDCMODE_ENABLE); 1857 1858 /* Turn on send data completion state machine */ 1859 val = BGE_SDCMODE_ENABLE; 1860 if (sc->bge_asicrev == BGE_ASICREV_BCM5761) 1861 val |= BGE_SDCMODE_CDELAY; 1862 CSR_WRITE_4(sc, BGE_SDC_MODE, val); 1863 1864 /* Turn on send data initiator state machine */ 1865 if (sc->bge_flags & BGE_FLAG_TSO) 1866 CSR_WRITE_4(sc, BGE_SDI_MODE, BGE_SDIMODE_ENABLE | 0x08); 1867 else 1868 CSR_WRITE_4(sc, BGE_SDI_MODE, BGE_SDIMODE_ENABLE); 1869 1870 /* Turn on send BD initiator state machine */ 1871 CSR_WRITE_4(sc, BGE_SBDI_MODE, BGE_SBDIMODE_ENABLE); 1872 1873 /* Turn on send BD selector state machine */ 1874 CSR_WRITE_4(sc, BGE_SRS_MODE, BGE_SRSMODE_ENABLE); 1875 1876 CSR_WRITE_4(sc, BGE_SDI_STATS_ENABLE_MASK, 0x007FFFFF); 1877 CSR_WRITE_4(sc, BGE_SDI_STATS_CTL, 1878 BGE_SDISTATSCTL_ENABLE | BGE_SDISTATSCTL_FASTER); 1879 1880 /* ack/clear link change events */ 1881 CSR_WRITE_4(sc, BGE_MAC_STS, BGE_MACSTAT_SYNC_CHANGED | 1882 BGE_MACSTAT_CFG_CHANGED | BGE_MACSTAT_MI_COMPLETE | 1883 BGE_MACSTAT_LINK_CHANGED); 1884 CSR_WRITE_4(sc, BGE_MI_STS, 0); 1885 1886 /* Enable PHY auto polling (for MII/GMII only) */ 1887 if (sc->bge_flags & BGE_FLAG_TBI) { 1888 CSR_WRITE_4(sc, BGE_MI_STS, BGE_MISTS_LINK); 1889 } else { 1890 BGE_SETBIT(sc, BGE_MI_MODE, BGE_MIMODE_AUTOPOLL | (10 << 16)); 1891 if (sc->bge_asicrev == BGE_ASICREV_BCM5700 && 1892 sc->bge_chipid != BGE_CHIPID_BCM5700_B2) 1893 CSR_WRITE_4(sc, BGE_MAC_EVT_ENB, 1894 BGE_EVTENB_MI_INTERRUPT); 1895 } 1896 1897 /* 1898 * Clear any pending link state attention. 1899 * Otherwise some link state change events may be lost until attention 1900 * is cleared by bge_intr() -> bge_link_upd() sequence. 1901 * It's not necessary on newer BCM chips - perhaps enabling link 1902 * state change attentions implies clearing pending attention. 1903 */ 1904 CSR_WRITE_4(sc, BGE_MAC_STS, BGE_MACSTAT_SYNC_CHANGED | 1905 BGE_MACSTAT_CFG_CHANGED | BGE_MACSTAT_MI_COMPLETE | 1906 BGE_MACSTAT_LINK_CHANGED); 1907 1908 /* Enable link state change attentions. */ 1909 BGE_SETBIT(sc, BGE_MAC_EVT_ENB, BGE_EVTENB_LINK_CHANGED); 1910 1911 return (0); 1912 } 1913 1914 const struct bge_revision * 1915 bge_lookup_rev(uint32_t chipid) 1916 { 1917 const struct bge_revision *br; 1918 1919 for (br = bge_revisions; br->br_name != NULL; br++) { 1920 if (br->br_chipid == chipid) 1921 return (br); 1922 } 1923 1924 for (br = bge_majorrevs; br->br_name != NULL; br++) { 1925 if (br->br_chipid == BGE_ASICREV(chipid)) 1926 return (br); 1927 } 1928 1929 return (NULL); 1930 } 1931 1932 const struct bge_vendor * 1933 bge_lookup_vendor(uint16_t vid) 1934 { 1935 const struct bge_vendor *v; 1936 1937 for (v = bge_vendors; v->v_name != NULL; v++) 1938 if (v->v_id == vid) 1939 return (v); 1940 1941 panic("%s: unknown vendor %d", __func__, vid); 1942 return (NULL); 1943 } 1944 1945 /* 1946 * Probe for a Broadcom chip. Check the PCI vendor and device IDs 1947 * against our list and return its name if we find a match. 1948 * 1949 * Note that since the Broadcom controller contains VPD support, we 1950 * try to get the device name string from the controller itself instead 1951 * of the compiled-in string. It guarantees we'll always announce the 1952 * right product name. We fall back to the compiled-in string when 1953 * VPD is unavailable or corrupt. 1954 */ 1955 static int 1956 bge_probe(device_t dev) 1957 { 1958 const struct bge_type *t = bge_devs; 1959 struct bge_softc *sc = device_get_softc(dev); 1960 uint16_t vid, did; 1961 1962 sc->bge_dev = dev; 1963 vid = pci_get_vendor(dev); 1964 did = pci_get_device(dev); 1965 while(t->bge_vid != 0) { 1966 if ((vid == t->bge_vid) && (did == t->bge_did)) { 1967 char model[64], buf[96]; 1968 const struct bge_revision *br; 1969 const struct bge_vendor *v; 1970 uint32_t id; 1971 1972 id = pci_read_config(dev, BGE_PCI_MISC_CTL, 4) >> 1973 BGE_PCIMISCCTL_ASICREV_SHIFT; 1974 if (BGE_ASICREV(id) == BGE_ASICREV_USE_PRODID_REG) 1975 id = pci_read_config(dev, 1976 BGE_PCI_PRODID_ASICREV, 4); 1977 br = bge_lookup_rev(id); 1978 v = bge_lookup_vendor(vid); 1979 { 1980 #if __FreeBSD_version > 700024 1981 const char *pname; 1982 1983 if (bge_has_eaddr(sc) && 1984 pci_get_vpd_ident(dev, &pname) == 0) 1985 snprintf(model, 64, "%s", pname); 1986 else 1987 #endif 1988 snprintf(model, 64, "%s %s", 1989 v->v_name, 1990 br != NULL ? br->br_name : 1991 "NetXtreme Ethernet Controller"); 1992 } 1993 snprintf(buf, 96, "%s, %sASIC rev. %#08x", model, 1994 br != NULL ? "" : "unknown ", id); 1995 device_set_desc_copy(dev, buf); 1996 if (pci_get_subvendor(dev) == DELL_VENDORID) 1997 sc->bge_flags |= BGE_FLAG_NO_3LED; 1998 if (did == BCOM_DEVICEID_BCM5755M) 1999 sc->bge_flags |= BGE_FLAG_ADJUST_TRIM; 2000 return (0); 2001 } 2002 t++; 2003 } 2004 2005 return (ENXIO); 2006 } 2007 2008 static void 2009 bge_dma_free(struct bge_softc *sc) 2010 { 2011 int i; 2012 2013 /* Destroy DMA maps for RX buffers. */ 2014 for (i = 0; i < BGE_STD_RX_RING_CNT; i++) { 2015 if (sc->bge_cdata.bge_rx_std_dmamap[i]) 2016 bus_dmamap_destroy(sc->bge_cdata.bge_rx_mtag, 2017 sc->bge_cdata.bge_rx_std_dmamap[i]); 2018 } 2019 if (sc->bge_cdata.bge_rx_std_sparemap) 2020 bus_dmamap_destroy(sc->bge_cdata.bge_rx_mtag, 2021 sc->bge_cdata.bge_rx_std_sparemap); 2022 2023 /* Destroy DMA maps for jumbo RX buffers. */ 2024 for (i = 0; i < BGE_JUMBO_RX_RING_CNT; i++) { 2025 if (sc->bge_cdata.bge_rx_jumbo_dmamap[i]) 2026 bus_dmamap_destroy(sc->bge_cdata.bge_mtag_jumbo, 2027 sc->bge_cdata.bge_rx_jumbo_dmamap[i]); 2028 } 2029 if (sc->bge_cdata.bge_rx_jumbo_sparemap) 2030 bus_dmamap_destroy(sc->bge_cdata.bge_mtag_jumbo, 2031 sc->bge_cdata.bge_rx_jumbo_sparemap); 2032 2033 /* Destroy DMA maps for TX buffers. */ 2034 for (i = 0; i < BGE_TX_RING_CNT; i++) { 2035 if (sc->bge_cdata.bge_tx_dmamap[i]) 2036 bus_dmamap_destroy(sc->bge_cdata.bge_tx_mtag, 2037 sc->bge_cdata.bge_tx_dmamap[i]); 2038 } 2039 2040 if (sc->bge_cdata.bge_rx_mtag) 2041 bus_dma_tag_destroy(sc->bge_cdata.bge_rx_mtag); 2042 if (sc->bge_cdata.bge_tx_mtag) 2043 bus_dma_tag_destroy(sc->bge_cdata.bge_tx_mtag); 2044 2045 2046 /* Destroy standard RX ring. */ 2047 if (sc->bge_cdata.bge_rx_std_ring_map) 2048 bus_dmamap_unload(sc->bge_cdata.bge_rx_std_ring_tag, 2049 sc->bge_cdata.bge_rx_std_ring_map); 2050 if (sc->bge_cdata.bge_rx_std_ring_map && sc->bge_ldata.bge_rx_std_ring) 2051 bus_dmamem_free(sc->bge_cdata.bge_rx_std_ring_tag, 2052 sc->bge_ldata.bge_rx_std_ring, 2053 sc->bge_cdata.bge_rx_std_ring_map); 2054 2055 if (sc->bge_cdata.bge_rx_std_ring_tag) 2056 bus_dma_tag_destroy(sc->bge_cdata.bge_rx_std_ring_tag); 2057 2058 /* Destroy jumbo RX ring. */ 2059 if (sc->bge_cdata.bge_rx_jumbo_ring_map) 2060 bus_dmamap_unload(sc->bge_cdata.bge_rx_jumbo_ring_tag, 2061 sc->bge_cdata.bge_rx_jumbo_ring_map); 2062 2063 if (sc->bge_cdata.bge_rx_jumbo_ring_map && 2064 sc->bge_ldata.bge_rx_jumbo_ring) 2065 bus_dmamem_free(sc->bge_cdata.bge_rx_jumbo_ring_tag, 2066 sc->bge_ldata.bge_rx_jumbo_ring, 2067 sc->bge_cdata.bge_rx_jumbo_ring_map); 2068 2069 if (sc->bge_cdata.bge_rx_jumbo_ring_tag) 2070 bus_dma_tag_destroy(sc->bge_cdata.bge_rx_jumbo_ring_tag); 2071 2072 /* Destroy RX return ring. */ 2073 if (sc->bge_cdata.bge_rx_return_ring_map) 2074 bus_dmamap_unload(sc->bge_cdata.bge_rx_return_ring_tag, 2075 sc->bge_cdata.bge_rx_return_ring_map); 2076 2077 if (sc->bge_cdata.bge_rx_return_ring_map && 2078 sc->bge_ldata.bge_rx_return_ring) 2079 bus_dmamem_free(sc->bge_cdata.bge_rx_return_ring_tag, 2080 sc->bge_ldata.bge_rx_return_ring, 2081 sc->bge_cdata.bge_rx_return_ring_map); 2082 2083 if (sc->bge_cdata.bge_rx_return_ring_tag) 2084 bus_dma_tag_destroy(sc->bge_cdata.bge_rx_return_ring_tag); 2085 2086 /* Destroy TX ring. */ 2087 if (sc->bge_cdata.bge_tx_ring_map) 2088 bus_dmamap_unload(sc->bge_cdata.bge_tx_ring_tag, 2089 sc->bge_cdata.bge_tx_ring_map); 2090 2091 if (sc->bge_cdata.bge_tx_ring_map && sc->bge_ldata.bge_tx_ring) 2092 bus_dmamem_free(sc->bge_cdata.bge_tx_ring_tag, 2093 sc->bge_ldata.bge_tx_ring, 2094 sc->bge_cdata.bge_tx_ring_map); 2095 2096 if (sc->bge_cdata.bge_tx_ring_tag) 2097 bus_dma_tag_destroy(sc->bge_cdata.bge_tx_ring_tag); 2098 2099 /* Destroy status block. */ 2100 if (sc->bge_cdata.bge_status_map) 2101 bus_dmamap_unload(sc->bge_cdata.bge_status_tag, 2102 sc->bge_cdata.bge_status_map); 2103 2104 if (sc->bge_cdata.bge_status_map && sc->bge_ldata.bge_status_block) 2105 bus_dmamem_free(sc->bge_cdata.bge_status_tag, 2106 sc->bge_ldata.bge_status_block, 2107 sc->bge_cdata.bge_status_map); 2108 2109 if (sc->bge_cdata.bge_status_tag) 2110 bus_dma_tag_destroy(sc->bge_cdata.bge_status_tag); 2111 2112 /* Destroy statistics block. */ 2113 if (sc->bge_cdata.bge_stats_map) 2114 bus_dmamap_unload(sc->bge_cdata.bge_stats_tag, 2115 sc->bge_cdata.bge_stats_map); 2116 2117 if (sc->bge_cdata.bge_stats_map && sc->bge_ldata.bge_stats) 2118 bus_dmamem_free(sc->bge_cdata.bge_stats_tag, 2119 sc->bge_ldata.bge_stats, 2120 sc->bge_cdata.bge_stats_map); 2121 2122 if (sc->bge_cdata.bge_stats_tag) 2123 bus_dma_tag_destroy(sc->bge_cdata.bge_stats_tag); 2124 2125 /* Destroy the parent tag. */ 2126 if (sc->bge_cdata.bge_parent_tag) 2127 bus_dma_tag_destroy(sc->bge_cdata.bge_parent_tag); 2128 } 2129 2130 static int 2131 bge_dma_alloc(device_t dev) 2132 { 2133 struct bge_dmamap_arg ctx; 2134 struct bge_softc *sc; 2135 bus_addr_t lowaddr; 2136 bus_size_t sbsz, txsegsz, txmaxsegsz; 2137 int i, error; 2138 2139 sc = device_get_softc(dev); 2140 2141 lowaddr = BUS_SPACE_MAXADDR; 2142 if ((sc->bge_flags & BGE_FLAG_40BIT_BUG) != 0) 2143 lowaddr = BGE_DMA_MAXADDR; 2144 if ((sc->bge_flags & BGE_FLAG_4G_BNDRY_BUG) != 0) 2145 lowaddr = BUS_SPACE_MAXADDR_32BIT; 2146 /* 2147 * Allocate the parent bus DMA tag appropriate for PCI. 2148 */ 2149 error = bus_dma_tag_create(bus_get_dma_tag(sc->bge_dev), 2150 1, 0, lowaddr, BUS_SPACE_MAXADDR, NULL, 2151 NULL, BUS_SPACE_MAXSIZE_32BIT, 0, BUS_SPACE_MAXSIZE_32BIT, 2152 0, NULL, NULL, &sc->bge_cdata.bge_parent_tag); 2153 2154 if (error != 0) { 2155 device_printf(sc->bge_dev, 2156 "could not allocate parent dma tag\n"); 2157 return (ENOMEM); 2158 } 2159 2160 /* 2161 * Create tag for Tx mbufs. 2162 */ 2163 if (sc->bge_flags & BGE_FLAG_TSO) { 2164 txsegsz = BGE_TSOSEG_SZ; 2165 txmaxsegsz = 65535 + sizeof(struct ether_vlan_header); 2166 } else { 2167 txsegsz = MCLBYTES; 2168 txmaxsegsz = MCLBYTES * BGE_NSEG_NEW; 2169 } 2170 error = bus_dma_tag_create(sc->bge_cdata.bge_parent_tag, 1, 2171 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL, 2172 txmaxsegsz, BGE_NSEG_NEW, txsegsz, 0, NULL, NULL, 2173 &sc->bge_cdata.bge_tx_mtag); 2174 2175 if (error) { 2176 device_printf(sc->bge_dev, "could not allocate TX dma tag\n"); 2177 return (ENOMEM); 2178 } 2179 2180 /* 2181 * Create tag for Rx mbufs. 2182 */ 2183 error = bus_dma_tag_create(sc->bge_cdata.bge_parent_tag, 1, 0, 2184 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, 1, 2185 MCLBYTES, 0, NULL, NULL, &sc->bge_cdata.bge_rx_mtag); 2186 2187 if (error) { 2188 device_printf(sc->bge_dev, "could not allocate RX dma tag\n"); 2189 return (ENOMEM); 2190 } 2191 2192 /* Create DMA maps for RX buffers. */ 2193 error = bus_dmamap_create(sc->bge_cdata.bge_rx_mtag, 0, 2194 &sc->bge_cdata.bge_rx_std_sparemap); 2195 if (error) { 2196 device_printf(sc->bge_dev, 2197 "can't create spare DMA map for RX\n"); 2198 return (ENOMEM); 2199 } 2200 for (i = 0; i < BGE_STD_RX_RING_CNT; i++) { 2201 error = bus_dmamap_create(sc->bge_cdata.bge_rx_mtag, 0, 2202 &sc->bge_cdata.bge_rx_std_dmamap[i]); 2203 if (error) { 2204 device_printf(sc->bge_dev, 2205 "can't create DMA map for RX\n"); 2206 return (ENOMEM); 2207 } 2208 } 2209 2210 /* Create DMA maps for TX buffers. */ 2211 for (i = 0; i < BGE_TX_RING_CNT; i++) { 2212 error = bus_dmamap_create(sc->bge_cdata.bge_tx_mtag, 0, 2213 &sc->bge_cdata.bge_tx_dmamap[i]); 2214 if (error) { 2215 device_printf(sc->bge_dev, 2216 "can't create DMA map for TX\n"); 2217 return (ENOMEM); 2218 } 2219 } 2220 2221 /* Create tag for standard RX ring. */ 2222 error = bus_dma_tag_create(sc->bge_cdata.bge_parent_tag, 2223 PAGE_SIZE, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, 2224 NULL, BGE_STD_RX_RING_SZ, 1, BGE_STD_RX_RING_SZ, 0, 2225 NULL, NULL, &sc->bge_cdata.bge_rx_std_ring_tag); 2226 2227 if (error) { 2228 device_printf(sc->bge_dev, "could not allocate dma tag\n"); 2229 return (ENOMEM); 2230 } 2231 2232 /* Allocate DMA'able memory for standard RX ring. */ 2233 error = bus_dmamem_alloc(sc->bge_cdata.bge_rx_std_ring_tag, 2234 (void **)&sc->bge_ldata.bge_rx_std_ring, BUS_DMA_NOWAIT, 2235 &sc->bge_cdata.bge_rx_std_ring_map); 2236 if (error) 2237 return (ENOMEM); 2238 2239 bzero((char *)sc->bge_ldata.bge_rx_std_ring, BGE_STD_RX_RING_SZ); 2240 2241 /* Load the address of the standard RX ring. */ 2242 ctx.bge_maxsegs = 1; 2243 ctx.sc = sc; 2244 2245 error = bus_dmamap_load(sc->bge_cdata.bge_rx_std_ring_tag, 2246 sc->bge_cdata.bge_rx_std_ring_map, sc->bge_ldata.bge_rx_std_ring, 2247 BGE_STD_RX_RING_SZ, bge_dma_map_addr, &ctx, BUS_DMA_NOWAIT); 2248 2249 if (error) 2250 return (ENOMEM); 2251 2252 sc->bge_ldata.bge_rx_std_ring_paddr = ctx.bge_busaddr; 2253 2254 /* Create tags for jumbo mbufs. */ 2255 if (BGE_IS_JUMBO_CAPABLE(sc)) { 2256 error = bus_dma_tag_create(sc->bge_cdata.bge_parent_tag, 2257 1, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, 2258 NULL, MJUM9BYTES, BGE_NSEG_JUMBO, PAGE_SIZE, 2259 0, NULL, NULL, &sc->bge_cdata.bge_mtag_jumbo); 2260 if (error) { 2261 device_printf(sc->bge_dev, 2262 "could not allocate jumbo dma tag\n"); 2263 return (ENOMEM); 2264 } 2265 2266 /* Create tag for jumbo RX ring. */ 2267 error = bus_dma_tag_create(sc->bge_cdata.bge_parent_tag, 2268 PAGE_SIZE, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, 2269 NULL, BGE_JUMBO_RX_RING_SZ, 1, BGE_JUMBO_RX_RING_SZ, 0, 2270 NULL, NULL, &sc->bge_cdata.bge_rx_jumbo_ring_tag); 2271 2272 if (error) { 2273 device_printf(sc->bge_dev, 2274 "could not allocate jumbo ring dma tag\n"); 2275 return (ENOMEM); 2276 } 2277 2278 /* Allocate DMA'able memory for jumbo RX ring. */ 2279 error = bus_dmamem_alloc(sc->bge_cdata.bge_rx_jumbo_ring_tag, 2280 (void **)&sc->bge_ldata.bge_rx_jumbo_ring, 2281 BUS_DMA_NOWAIT | BUS_DMA_ZERO, 2282 &sc->bge_cdata.bge_rx_jumbo_ring_map); 2283 if (error) 2284 return (ENOMEM); 2285 2286 /* Load the address of the jumbo RX ring. */ 2287 ctx.bge_maxsegs = 1; 2288 ctx.sc = sc; 2289 2290 error = bus_dmamap_load(sc->bge_cdata.bge_rx_jumbo_ring_tag, 2291 sc->bge_cdata.bge_rx_jumbo_ring_map, 2292 sc->bge_ldata.bge_rx_jumbo_ring, BGE_JUMBO_RX_RING_SZ, 2293 bge_dma_map_addr, &ctx, BUS_DMA_NOWAIT); 2294 2295 if (error) 2296 return (ENOMEM); 2297 2298 sc->bge_ldata.bge_rx_jumbo_ring_paddr = ctx.bge_busaddr; 2299 2300 /* Create DMA maps for jumbo RX buffers. */ 2301 error = bus_dmamap_create(sc->bge_cdata.bge_mtag_jumbo, 2302 0, &sc->bge_cdata.bge_rx_jumbo_sparemap); 2303 if (error) { 2304 device_printf(sc->bge_dev, 2305 "can't create spare DMA map for jumbo RX\n"); 2306 return (ENOMEM); 2307 } 2308 for (i = 0; i < BGE_JUMBO_RX_RING_CNT; i++) { 2309 error = bus_dmamap_create(sc->bge_cdata.bge_mtag_jumbo, 2310 0, &sc->bge_cdata.bge_rx_jumbo_dmamap[i]); 2311 if (error) { 2312 device_printf(sc->bge_dev, 2313 "can't create DMA map for jumbo RX\n"); 2314 return (ENOMEM); 2315 } 2316 } 2317 2318 } 2319 2320 /* Create tag for RX return ring. */ 2321 error = bus_dma_tag_create(sc->bge_cdata.bge_parent_tag, 2322 PAGE_SIZE, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, 2323 NULL, BGE_RX_RTN_RING_SZ(sc), 1, BGE_RX_RTN_RING_SZ(sc), 0, 2324 NULL, NULL, &sc->bge_cdata.bge_rx_return_ring_tag); 2325 2326 if (error) { 2327 device_printf(sc->bge_dev, "could not allocate dma tag\n"); 2328 return (ENOMEM); 2329 } 2330 2331 /* Allocate DMA'able memory for RX return ring. */ 2332 error = bus_dmamem_alloc(sc->bge_cdata.bge_rx_return_ring_tag, 2333 (void **)&sc->bge_ldata.bge_rx_return_ring, BUS_DMA_NOWAIT, 2334 &sc->bge_cdata.bge_rx_return_ring_map); 2335 if (error) 2336 return (ENOMEM); 2337 2338 bzero((char *)sc->bge_ldata.bge_rx_return_ring, 2339 BGE_RX_RTN_RING_SZ(sc)); 2340 2341 /* Load the address of the RX return ring. */ 2342 ctx.bge_maxsegs = 1; 2343 ctx.sc = sc; 2344 2345 error = bus_dmamap_load(sc->bge_cdata.bge_rx_return_ring_tag, 2346 sc->bge_cdata.bge_rx_return_ring_map, 2347 sc->bge_ldata.bge_rx_return_ring, BGE_RX_RTN_RING_SZ(sc), 2348 bge_dma_map_addr, &ctx, BUS_DMA_NOWAIT); 2349 2350 if (error) 2351 return (ENOMEM); 2352 2353 sc->bge_ldata.bge_rx_return_ring_paddr = ctx.bge_busaddr; 2354 2355 /* Create tag for TX ring. */ 2356 error = bus_dma_tag_create(sc->bge_cdata.bge_parent_tag, 2357 PAGE_SIZE, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, 2358 NULL, BGE_TX_RING_SZ, 1, BGE_TX_RING_SZ, 0, NULL, NULL, 2359 &sc->bge_cdata.bge_tx_ring_tag); 2360 2361 if (error) { 2362 device_printf(sc->bge_dev, "could not allocate dma tag\n"); 2363 return (ENOMEM); 2364 } 2365 2366 /* Allocate DMA'able memory for TX ring. */ 2367 error = bus_dmamem_alloc(sc->bge_cdata.bge_tx_ring_tag, 2368 (void **)&sc->bge_ldata.bge_tx_ring, BUS_DMA_NOWAIT, 2369 &sc->bge_cdata.bge_tx_ring_map); 2370 if (error) 2371 return (ENOMEM); 2372 2373 bzero((char *)sc->bge_ldata.bge_tx_ring, BGE_TX_RING_SZ); 2374 2375 /* Load the address of the TX ring. */ 2376 ctx.bge_maxsegs = 1; 2377 ctx.sc = sc; 2378 2379 error = bus_dmamap_load(sc->bge_cdata.bge_tx_ring_tag, 2380 sc->bge_cdata.bge_tx_ring_map, sc->bge_ldata.bge_tx_ring, 2381 BGE_TX_RING_SZ, bge_dma_map_addr, &ctx, BUS_DMA_NOWAIT); 2382 2383 if (error) 2384 return (ENOMEM); 2385 2386 sc->bge_ldata.bge_tx_ring_paddr = ctx.bge_busaddr; 2387 2388 /* 2389 * Create tag for status block. 2390 * Because we only use single Tx/Rx/Rx return ring, use 2391 * minimum status block size except BCM5700 AX/BX which 2392 * seems to want to see full status block size regardless 2393 * of configured number of ring. 2394 */ 2395 if (sc->bge_asicrev == BGE_ASICREV_BCM5700 && 2396 sc->bge_chipid != BGE_CHIPID_BCM5700_C0) 2397 sbsz = BGE_STATUS_BLK_SZ; 2398 else 2399 sbsz = 32; 2400 error = bus_dma_tag_create(sc->bge_cdata.bge_parent_tag, 2401 PAGE_SIZE, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, 2402 NULL, sbsz, 1, sbsz, 0, NULL, NULL, &sc->bge_cdata.bge_status_tag); 2403 2404 if (error) { 2405 device_printf(sc->bge_dev, 2406 "could not allocate status dma tag\n"); 2407 return (ENOMEM); 2408 } 2409 2410 /* Allocate DMA'able memory for status block. */ 2411 error = bus_dmamem_alloc(sc->bge_cdata.bge_status_tag, 2412 (void **)&sc->bge_ldata.bge_status_block, BUS_DMA_NOWAIT, 2413 &sc->bge_cdata.bge_status_map); 2414 if (error) 2415 return (ENOMEM); 2416 2417 bzero((char *)sc->bge_ldata.bge_status_block, sbsz); 2418 2419 /* Load the address of the status block. */ 2420 ctx.sc = sc; 2421 ctx.bge_maxsegs = 1; 2422 2423 error = bus_dmamap_load(sc->bge_cdata.bge_status_tag, 2424 sc->bge_cdata.bge_status_map, sc->bge_ldata.bge_status_block, 2425 sbsz, bge_dma_map_addr, &ctx, BUS_DMA_NOWAIT); 2426 2427 if (error) 2428 return (ENOMEM); 2429 2430 sc->bge_ldata.bge_status_block_paddr = ctx.bge_busaddr; 2431 2432 /* Create tag for statistics block. */ 2433 error = bus_dma_tag_create(sc->bge_cdata.bge_parent_tag, 2434 PAGE_SIZE, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, 2435 NULL, BGE_STATS_SZ, 1, BGE_STATS_SZ, 0, NULL, NULL, 2436 &sc->bge_cdata.bge_stats_tag); 2437 2438 if (error) { 2439 device_printf(sc->bge_dev, "could not allocate dma tag\n"); 2440 return (ENOMEM); 2441 } 2442 2443 /* Allocate DMA'able memory for statistics block. */ 2444 error = bus_dmamem_alloc(sc->bge_cdata.bge_stats_tag, 2445 (void **)&sc->bge_ldata.bge_stats, BUS_DMA_NOWAIT, 2446 &sc->bge_cdata.bge_stats_map); 2447 if (error) 2448 return (ENOMEM); 2449 2450 bzero((char *)sc->bge_ldata.bge_stats, BGE_STATS_SZ); 2451 2452 /* Load the address of the statstics block. */ 2453 ctx.sc = sc; 2454 ctx.bge_maxsegs = 1; 2455 2456 error = bus_dmamap_load(sc->bge_cdata.bge_stats_tag, 2457 sc->bge_cdata.bge_stats_map, sc->bge_ldata.bge_stats, 2458 BGE_STATS_SZ, bge_dma_map_addr, &ctx, BUS_DMA_NOWAIT); 2459 2460 if (error) 2461 return (ENOMEM); 2462 2463 sc->bge_ldata.bge_stats_paddr = ctx.bge_busaddr; 2464 2465 return (0); 2466 } 2467 2468 /* 2469 * Return true if this device has more than one port. 2470 */ 2471 static int 2472 bge_has_multiple_ports(struct bge_softc *sc) 2473 { 2474 device_t dev = sc->bge_dev; 2475 u_int b, d, f, fscan, s; 2476 2477 d = pci_get_domain(dev); 2478 b = pci_get_bus(dev); 2479 s = pci_get_slot(dev); 2480 f = pci_get_function(dev); 2481 for (fscan = 0; fscan <= PCI_FUNCMAX; fscan++) 2482 if (fscan != f && pci_find_dbsf(d, b, s, fscan) != NULL) 2483 return (1); 2484 return (0); 2485 } 2486 2487 /* 2488 * Return true if MSI can be used with this device. 2489 */ 2490 static int 2491 bge_can_use_msi(struct bge_softc *sc) 2492 { 2493 int can_use_msi = 0; 2494 2495 switch (sc->bge_asicrev) { 2496 case BGE_ASICREV_BCM5714_A0: 2497 case BGE_ASICREV_BCM5714: 2498 /* 2499 * Apparently, MSI doesn't work when these chips are 2500 * configured in single-port mode. 2501 */ 2502 if (bge_has_multiple_ports(sc)) 2503 can_use_msi = 1; 2504 break; 2505 case BGE_ASICREV_BCM5750: 2506 if (sc->bge_chiprev != BGE_CHIPREV_5750_AX && 2507 sc->bge_chiprev != BGE_CHIPREV_5750_BX) 2508 can_use_msi = 1; 2509 break; 2510 default: 2511 if (BGE_IS_575X_PLUS(sc)) 2512 can_use_msi = 1; 2513 } 2514 return (can_use_msi); 2515 } 2516 2517 static int 2518 bge_attach(device_t dev) 2519 { 2520 struct ifnet *ifp; 2521 struct bge_softc *sc; 2522 uint32_t hwcfg = 0, misccfg; 2523 u_char eaddr[ETHER_ADDR_LEN]; 2524 int error, msicount, reg, rid, trys; 2525 2526 sc = device_get_softc(dev); 2527 sc->bge_dev = dev; 2528 2529 TASK_INIT(&sc->bge_intr_task, 0, bge_intr_task, sc); 2530 2531 /* 2532 * Map control/status registers. 2533 */ 2534 pci_enable_busmaster(dev); 2535 2536 rid = BGE_PCI_BAR0; 2537 sc->bge_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, 2538 RF_ACTIVE); 2539 2540 if (sc->bge_res == NULL) { 2541 device_printf (sc->bge_dev, "couldn't map memory\n"); 2542 error = ENXIO; 2543 goto fail; 2544 } 2545 2546 /* Save various chip information. */ 2547 sc->bge_chipid = 2548 pci_read_config(dev, BGE_PCI_MISC_CTL, 4) >> 2549 BGE_PCIMISCCTL_ASICREV_SHIFT; 2550 if (BGE_ASICREV(sc->bge_chipid) == BGE_ASICREV_USE_PRODID_REG) 2551 sc->bge_chipid = pci_read_config(dev, BGE_PCI_PRODID_ASICREV, 2552 4); 2553 sc->bge_asicrev = BGE_ASICREV(sc->bge_chipid); 2554 sc->bge_chiprev = BGE_CHIPREV(sc->bge_chipid); 2555 2556 /* 2557 * Don't enable Ethernet@WireSpeed for the 5700, 5906, or the 2558 * 5705 A0 and A1 chips. 2559 */ 2560 if (sc->bge_asicrev != BGE_ASICREV_BCM5700 && 2561 sc->bge_asicrev != BGE_ASICREV_BCM5906 && 2562 sc->bge_chipid != BGE_CHIPID_BCM5705_A0 && 2563 sc->bge_chipid != BGE_CHIPID_BCM5705_A1) 2564 sc->bge_flags |= BGE_FLAG_WIRESPEED; 2565 2566 if (bge_has_eaddr(sc)) 2567 sc->bge_flags |= BGE_FLAG_EADDR; 2568 2569 /* Save chipset family. */ 2570 switch (sc->bge_asicrev) { 2571 case BGE_ASICREV_BCM5755: 2572 case BGE_ASICREV_BCM5761: 2573 case BGE_ASICREV_BCM5784: 2574 case BGE_ASICREV_BCM5785: 2575 case BGE_ASICREV_BCM5787: 2576 case BGE_ASICREV_BCM57780: 2577 sc->bge_flags |= BGE_FLAG_5755_PLUS | BGE_FLAG_575X_PLUS | 2578 BGE_FLAG_5705_PLUS; 2579 break; 2580 case BGE_ASICREV_BCM5700: 2581 case BGE_ASICREV_BCM5701: 2582 case BGE_ASICREV_BCM5703: 2583 case BGE_ASICREV_BCM5704: 2584 sc->bge_flags |= BGE_FLAG_5700_FAMILY | BGE_FLAG_JUMBO; 2585 break; 2586 case BGE_ASICREV_BCM5714_A0: 2587 case BGE_ASICREV_BCM5780: 2588 case BGE_ASICREV_BCM5714: 2589 sc->bge_flags |= BGE_FLAG_5714_FAMILY /* | BGE_FLAG_JUMBO */; 2590 /* FALLTHROUGH */ 2591 case BGE_ASICREV_BCM5750: 2592 case BGE_ASICREV_BCM5752: 2593 case BGE_ASICREV_BCM5906: 2594 sc->bge_flags |= BGE_FLAG_575X_PLUS; 2595 /* FALLTHROUGH */ 2596 case BGE_ASICREV_BCM5705: 2597 sc->bge_flags |= BGE_FLAG_5705_PLUS; 2598 break; 2599 } 2600 2601 /* Set various bug flags. */ 2602 if (sc->bge_chipid == BGE_CHIPID_BCM5701_A0 || 2603 sc->bge_chipid == BGE_CHIPID_BCM5701_B0) 2604 sc->bge_flags |= BGE_FLAG_CRC_BUG; 2605 if (sc->bge_chiprev == BGE_CHIPREV_5703_AX || 2606 sc->bge_chiprev == BGE_CHIPREV_5704_AX) 2607 sc->bge_flags |= BGE_FLAG_ADC_BUG; 2608 if (sc->bge_chipid == BGE_CHIPID_BCM5704_A0) 2609 sc->bge_flags |= BGE_FLAG_5704_A0_BUG; 2610 if (BGE_IS_5705_PLUS(sc) && 2611 !(sc->bge_flags & BGE_FLAG_ADJUST_TRIM)) { 2612 if (sc->bge_asicrev == BGE_ASICREV_BCM5755 || 2613 sc->bge_asicrev == BGE_ASICREV_BCM5761 || 2614 sc->bge_asicrev == BGE_ASICREV_BCM5784 || 2615 sc->bge_asicrev == BGE_ASICREV_BCM5787) { 2616 if (pci_get_device(dev) != BCOM_DEVICEID_BCM5722 && 2617 pci_get_device(dev) != BCOM_DEVICEID_BCM5756) 2618 sc->bge_flags |= BGE_FLAG_JITTER_BUG; 2619 } else if (sc->bge_asicrev != BGE_ASICREV_BCM5906) 2620 sc->bge_flags |= BGE_FLAG_BER_BUG; 2621 } 2622 2623 /* 2624 * All controllers that are not 5755 or higher have 4GB 2625 * boundary DMA bug. 2626 * Whenever an address crosses a multiple of the 4GB boundary 2627 * (including 4GB, 8Gb, 12Gb, etc.) and makes the transition 2628 * from 0xX_FFFF_FFFF to 0x(X+1)_0000_0000 an internal DMA 2629 * state machine will lockup and cause the device to hang. 2630 */ 2631 if (BGE_IS_5755_PLUS(sc) == 0) 2632 sc->bge_flags |= BGE_FLAG_4G_BNDRY_BUG; 2633 2634 /* 2635 * We could possibly check for BCOM_DEVICEID_BCM5788 in bge_probe() 2636 * but I do not know the DEVICEID for the 5788M. 2637 */ 2638 misccfg = CSR_READ_4(sc, BGE_MISC_CFG) & BGE_MISCCFG_BOARD_ID; 2639 if (misccfg == BGE_MISCCFG_BOARD_ID_5788 || 2640 misccfg == BGE_MISCCFG_BOARD_ID_5788M) 2641 sc->bge_flags |= BGE_FLAG_5788; 2642 2643 /* 2644 * Some controllers seem to require a special firmware to use 2645 * TSO. But the firmware is not available to FreeBSD and Linux 2646 * claims that the TSO performed by the firmware is slower than 2647 * hardware based TSO. Moreover the firmware based TSO has one 2648 * known bug which can't handle TSO if ethernet header + IP/TCP 2649 * header is greater than 80 bytes. The workaround for the TSO 2650 * bug exist but it seems it's too expensive than not using 2651 * TSO at all. Some hardwares also have the TSO bug so limit 2652 * the TSO to the controllers that are not affected TSO issues 2653 * (e.g. 5755 or higher). 2654 */ 2655 if (BGE_IS_5755_PLUS(sc)) { 2656 /* 2657 * BCM5754 and BCM5787 shares the same ASIC id so 2658 * explicit device id check is required. 2659 */ 2660 if (pci_get_device(dev) != BCOM_DEVICEID_BCM5754 && 2661 pci_get_device(dev) != BCOM_DEVICEID_BCM5754M) 2662 sc->bge_flags |= BGE_FLAG_TSO; 2663 } 2664 2665 /* 2666 * Check if this is a PCI-X or PCI Express device. 2667 */ 2668 if (pci_find_extcap(dev, PCIY_EXPRESS, ®) == 0) { 2669 /* 2670 * Found a PCI Express capabilities register, this 2671 * must be a PCI Express device. 2672 */ 2673 sc->bge_flags |= BGE_FLAG_PCIE; 2674 sc->bge_expcap = reg; 2675 bge_set_max_readrq(sc); 2676 } else { 2677 /* 2678 * Check if the device is in PCI-X Mode. 2679 * (This bit is not valid on PCI Express controllers.) 2680 */ 2681 if (pci_find_extcap(dev, PCIY_PCIX, ®) == 0) 2682 sc->bge_pcixcap = reg; 2683 if ((pci_read_config(dev, BGE_PCI_PCISTATE, 4) & 2684 BGE_PCISTATE_PCI_BUSMODE) == 0) 2685 sc->bge_flags |= BGE_FLAG_PCIX; 2686 } 2687 2688 /* 2689 * The 40bit DMA bug applies to the 5714/5715 controllers and is 2690 * not actually a MAC controller bug but an issue with the embedded 2691 * PCIe to PCI-X bridge in the device. Use 40bit DMA workaround. 2692 */ 2693 if (BGE_IS_5714_FAMILY(sc) && (sc->bge_flags & BGE_FLAG_PCIX)) 2694 sc->bge_flags |= BGE_FLAG_40BIT_BUG; 2695 /* 2696 * Allocate the interrupt, using MSI if possible. These devices 2697 * support 8 MSI messages, but only the first one is used in 2698 * normal operation. 2699 */ 2700 rid = 0; 2701 if (pci_find_extcap(sc->bge_dev, PCIY_MSI, ®) == 0) { 2702 sc->bge_msicap = reg; 2703 if (bge_can_use_msi(sc)) { 2704 msicount = pci_msi_count(dev); 2705 if (msicount > 1) 2706 msicount = 1; 2707 } else 2708 msicount = 0; 2709 if (msicount == 1 && pci_alloc_msi(dev, &msicount) == 0) { 2710 rid = 1; 2711 sc->bge_flags |= BGE_FLAG_MSI; 2712 } 2713 } 2714 2715 sc->bge_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, 2716 RF_SHAREABLE | RF_ACTIVE); 2717 2718 if (sc->bge_irq == NULL) { 2719 device_printf(sc->bge_dev, "couldn't map interrupt\n"); 2720 error = ENXIO; 2721 goto fail; 2722 } 2723 2724 if (bootverbose) 2725 device_printf(dev, 2726 "CHIP ID 0x%08x; ASIC REV 0x%02x; CHIP REV 0x%02x; %s\n", 2727 sc->bge_chipid, sc->bge_asicrev, sc->bge_chiprev, 2728 (sc->bge_flags & BGE_FLAG_PCIX) ? "PCI-X" : 2729 ((sc->bge_flags & BGE_FLAG_PCIE) ? "PCI-E" : "PCI")); 2730 2731 BGE_LOCK_INIT(sc, device_get_nameunit(dev)); 2732 2733 /* Try to reset the chip. */ 2734 if (bge_reset(sc)) { 2735 device_printf(sc->bge_dev, "chip reset failed\n"); 2736 error = ENXIO; 2737 goto fail; 2738 } 2739 2740 sc->bge_asf_mode = 0; 2741 if (bge_allow_asf && (bge_readmem_ind(sc, BGE_SOFTWARE_GENCOMM_SIG) 2742 == BGE_MAGIC_NUMBER)) { 2743 if (bge_readmem_ind(sc, BGE_SOFTWARE_GENCOMM_NICCFG) 2744 & BGE_HWCFG_ASF) { 2745 sc->bge_asf_mode |= ASF_ENABLE; 2746 sc->bge_asf_mode |= ASF_STACKUP; 2747 if (sc->bge_asicrev == BGE_ASICREV_BCM5750) { 2748 sc->bge_asf_mode |= ASF_NEW_HANDSHAKE; 2749 } 2750 } 2751 } 2752 2753 /* Try to reset the chip again the nice way. */ 2754 bge_stop_fw(sc); 2755 bge_sig_pre_reset(sc, BGE_RESET_STOP); 2756 if (bge_reset(sc)) { 2757 device_printf(sc->bge_dev, "chip reset failed\n"); 2758 error = ENXIO; 2759 goto fail; 2760 } 2761 2762 bge_sig_legacy(sc, BGE_RESET_STOP); 2763 bge_sig_post_reset(sc, BGE_RESET_STOP); 2764 2765 if (bge_chipinit(sc)) { 2766 device_printf(sc->bge_dev, "chip initialization failed\n"); 2767 error = ENXIO; 2768 goto fail; 2769 } 2770 2771 error = bge_get_eaddr(sc, eaddr); 2772 if (error) { 2773 device_printf(sc->bge_dev, 2774 "failed to read station address\n"); 2775 error = ENXIO; 2776 goto fail; 2777 } 2778 2779 /* 5705 limits RX return ring to 512 entries. */ 2780 if (BGE_IS_5705_PLUS(sc)) 2781 sc->bge_return_ring_cnt = BGE_RETURN_RING_CNT_5705; 2782 else 2783 sc->bge_return_ring_cnt = BGE_RETURN_RING_CNT; 2784 2785 if (bge_dma_alloc(dev)) { 2786 device_printf(sc->bge_dev, 2787 "failed to allocate DMA resources\n"); 2788 error = ENXIO; 2789 goto fail; 2790 } 2791 2792 /* Set default tuneable values. */ 2793 sc->bge_stat_ticks = BGE_TICKS_PER_SEC; 2794 sc->bge_rx_coal_ticks = 150; 2795 sc->bge_tx_coal_ticks = 150; 2796 sc->bge_rx_max_coal_bds = 10; 2797 sc->bge_tx_max_coal_bds = 10; 2798 2799 /* Set up ifnet structure */ 2800 ifp = sc->bge_ifp = if_alloc(IFT_ETHER); 2801 if (ifp == NULL) { 2802 device_printf(sc->bge_dev, "failed to if_alloc()\n"); 2803 error = ENXIO; 2804 goto fail; 2805 } 2806 ifp->if_softc = sc; 2807 if_initname(ifp, device_get_name(dev), device_get_unit(dev)); 2808 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 2809 ifp->if_ioctl = bge_ioctl; 2810 ifp->if_start = bge_start; 2811 ifp->if_init = bge_init; 2812 ifp->if_snd.ifq_drv_maxlen = BGE_TX_RING_CNT - 1; 2813 IFQ_SET_MAXLEN(&ifp->if_snd, ifp->if_snd.ifq_drv_maxlen); 2814 IFQ_SET_READY(&ifp->if_snd); 2815 ifp->if_hwassist = BGE_CSUM_FEATURES; 2816 ifp->if_capabilities = IFCAP_HWCSUM | IFCAP_VLAN_HWTAGGING | 2817 IFCAP_VLAN_MTU; 2818 if ((sc->bge_flags & BGE_FLAG_TSO) != 0) { 2819 ifp->if_hwassist |= CSUM_TSO; 2820 ifp->if_capabilities |= IFCAP_TSO4; 2821 } 2822 #ifdef IFCAP_VLAN_HWCSUM 2823 ifp->if_capabilities |= IFCAP_VLAN_HWCSUM; 2824 #endif 2825 ifp->if_capenable = ifp->if_capabilities; 2826 #ifdef DEVICE_POLLING 2827 ifp->if_capabilities |= IFCAP_POLLING; 2828 #endif 2829 2830 /* 2831 * 5700 B0 chips do not support checksumming correctly due 2832 * to hardware bugs. 2833 */ 2834 if (sc->bge_chipid == BGE_CHIPID_BCM5700_B0) { 2835 ifp->if_capabilities &= ~IFCAP_HWCSUM; 2836 ifp->if_capenable &= ~IFCAP_HWCSUM; 2837 ifp->if_hwassist = 0; 2838 } 2839 2840 /* 2841 * Figure out what sort of media we have by checking the 2842 * hardware config word in the first 32k of NIC internal memory, 2843 * or fall back to examining the EEPROM if necessary. 2844 * Note: on some BCM5700 cards, this value appears to be unset. 2845 * If that's the case, we have to rely on identifying the NIC 2846 * by its PCI subsystem ID, as we do below for the SysKonnect 2847 * SK-9D41. 2848 */ 2849 if (bge_readmem_ind(sc, BGE_SOFTWARE_GENCOMM_SIG) == BGE_MAGIC_NUMBER) 2850 hwcfg = bge_readmem_ind(sc, BGE_SOFTWARE_GENCOMM_NICCFG); 2851 else if ((sc->bge_flags & BGE_FLAG_EADDR) && 2852 (sc->bge_asicrev != BGE_ASICREV_BCM5906)) { 2853 if (bge_read_eeprom(sc, (caddr_t)&hwcfg, BGE_EE_HWCFG_OFFSET, 2854 sizeof(hwcfg))) { 2855 device_printf(sc->bge_dev, "failed to read EEPROM\n"); 2856 error = ENXIO; 2857 goto fail; 2858 } 2859 hwcfg = ntohl(hwcfg); 2860 } 2861 2862 /* The SysKonnect SK-9D41 is a 1000baseSX card. */ 2863 if ((pci_read_config(dev, BGE_PCI_SUBSYS, 4) >> 16) == 2864 SK_SUBSYSID_9D41 || (hwcfg & BGE_HWCFG_MEDIA) == BGE_MEDIA_FIBER) { 2865 if (BGE_IS_5714_FAMILY(sc)) 2866 sc->bge_flags |= BGE_FLAG_MII_SERDES; 2867 else 2868 sc->bge_flags |= BGE_FLAG_TBI; 2869 } 2870 2871 if (sc->bge_flags & BGE_FLAG_TBI) { 2872 ifmedia_init(&sc->bge_ifmedia, IFM_IMASK, bge_ifmedia_upd, 2873 bge_ifmedia_sts); 2874 ifmedia_add(&sc->bge_ifmedia, IFM_ETHER | IFM_1000_SX, 0, NULL); 2875 ifmedia_add(&sc->bge_ifmedia, IFM_ETHER | IFM_1000_SX | IFM_FDX, 2876 0, NULL); 2877 ifmedia_add(&sc->bge_ifmedia, IFM_ETHER | IFM_AUTO, 0, NULL); 2878 ifmedia_set(&sc->bge_ifmedia, IFM_ETHER | IFM_AUTO); 2879 sc->bge_ifmedia.ifm_media = sc->bge_ifmedia.ifm_cur->ifm_media; 2880 } else { 2881 /* 2882 * Do transceiver setup and tell the firmware the 2883 * driver is down so we can try to get access the 2884 * probe if ASF is running. Retry a couple of times 2885 * if we get a conflict with the ASF firmware accessing 2886 * the PHY. 2887 */ 2888 trys = 0; 2889 BGE_CLRBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP); 2890 again: 2891 bge_asf_driver_up(sc); 2892 2893 if (mii_phy_probe(dev, &sc->bge_miibus, 2894 bge_ifmedia_upd, bge_ifmedia_sts)) { 2895 if (trys++ < 4) { 2896 device_printf(sc->bge_dev, "Try again\n"); 2897 bge_miibus_writereg(sc->bge_dev, 1, MII_BMCR, 2898 BMCR_RESET); 2899 goto again; 2900 } 2901 2902 device_printf(sc->bge_dev, "MII without any PHY!\n"); 2903 error = ENXIO; 2904 goto fail; 2905 } 2906 2907 /* 2908 * Now tell the firmware we are going up after probing the PHY 2909 */ 2910 if (sc->bge_asf_mode & ASF_STACKUP) 2911 BGE_SETBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP); 2912 } 2913 2914 /* 2915 * When using the BCM5701 in PCI-X mode, data corruption has 2916 * been observed in the first few bytes of some received packets. 2917 * Aligning the packet buffer in memory eliminates the corruption. 2918 * Unfortunately, this misaligns the packet payloads. On platforms 2919 * which do not support unaligned accesses, we will realign the 2920 * payloads by copying the received packets. 2921 */ 2922 if (sc->bge_asicrev == BGE_ASICREV_BCM5701 && 2923 sc->bge_flags & BGE_FLAG_PCIX) 2924 sc->bge_flags |= BGE_FLAG_RX_ALIGNBUG; 2925 2926 /* 2927 * Call MI attach routine. 2928 */ 2929 ether_ifattach(ifp, eaddr); 2930 callout_init_mtx(&sc->bge_stat_ch, &sc->bge_mtx, 0); 2931 2932 /* Tell upper layer we support long frames. */ 2933 ifp->if_data.ifi_hdrlen = sizeof(struct ether_vlan_header); 2934 2935 /* 2936 * Hookup IRQ last. 2937 */ 2938 #if __FreeBSD_version > 700030 2939 if (BGE_IS_5755_PLUS(sc) && sc->bge_flags & BGE_FLAG_MSI) { 2940 /* Take advantage of single-shot MSI. */ 2941 CSR_WRITE_4(sc, BGE_MSI_MODE, CSR_READ_4(sc, BGE_MSI_MODE) & 2942 ~BGE_MSIMODE_ONE_SHOT_DISABLE); 2943 sc->bge_tq = taskqueue_create_fast("bge_taskq", M_WAITOK, 2944 taskqueue_thread_enqueue, &sc->bge_tq); 2945 if (sc->bge_tq == NULL) { 2946 device_printf(dev, "could not create taskqueue.\n"); 2947 ether_ifdetach(ifp); 2948 error = ENXIO; 2949 goto fail; 2950 } 2951 taskqueue_start_threads(&sc->bge_tq, 1, PI_NET, "%s taskq", 2952 device_get_nameunit(sc->bge_dev)); 2953 error = bus_setup_intr(dev, sc->bge_irq, 2954 INTR_TYPE_NET | INTR_MPSAFE, bge_msi_intr, NULL, sc, 2955 &sc->bge_intrhand); 2956 if (error) 2957 ether_ifdetach(ifp); 2958 } else 2959 error = bus_setup_intr(dev, sc->bge_irq, 2960 INTR_TYPE_NET | INTR_MPSAFE, NULL, bge_intr, sc, 2961 &sc->bge_intrhand); 2962 #else 2963 error = bus_setup_intr(dev, sc->bge_irq, INTR_TYPE_NET | INTR_MPSAFE, 2964 bge_intr, sc, &sc->bge_intrhand); 2965 #endif 2966 2967 if (error) { 2968 bge_detach(dev); 2969 device_printf(sc->bge_dev, "couldn't set up irq\n"); 2970 } 2971 2972 bge_add_sysctls(sc); 2973 2974 return (0); 2975 2976 fail: 2977 bge_release_resources(sc); 2978 2979 return (error); 2980 } 2981 2982 static int 2983 bge_detach(device_t dev) 2984 { 2985 struct bge_softc *sc; 2986 struct ifnet *ifp; 2987 2988 sc = device_get_softc(dev); 2989 ifp = sc->bge_ifp; 2990 2991 #ifdef DEVICE_POLLING 2992 if (ifp->if_capenable & IFCAP_POLLING) 2993 ether_poll_deregister(ifp); 2994 #endif 2995 2996 BGE_LOCK(sc); 2997 bge_stop(sc); 2998 bge_reset(sc); 2999 BGE_UNLOCK(sc); 3000 3001 callout_drain(&sc->bge_stat_ch); 3002 3003 if (sc->bge_tq) 3004 taskqueue_drain(sc->bge_tq, &sc->bge_intr_task); 3005 ether_ifdetach(ifp); 3006 3007 if (sc->bge_flags & BGE_FLAG_TBI) { 3008 ifmedia_removeall(&sc->bge_ifmedia); 3009 } else { 3010 bus_generic_detach(dev); 3011 device_delete_child(dev, sc->bge_miibus); 3012 } 3013 3014 bge_release_resources(sc); 3015 3016 return (0); 3017 } 3018 3019 static void 3020 bge_release_resources(struct bge_softc *sc) 3021 { 3022 device_t dev; 3023 3024 dev = sc->bge_dev; 3025 3026 if (sc->bge_tq != NULL) 3027 taskqueue_free(sc->bge_tq); 3028 3029 if (sc->bge_intrhand != NULL) 3030 bus_teardown_intr(dev, sc->bge_irq, sc->bge_intrhand); 3031 3032 if (sc->bge_irq != NULL) 3033 bus_release_resource(dev, SYS_RES_IRQ, 3034 sc->bge_flags & BGE_FLAG_MSI ? 1 : 0, sc->bge_irq); 3035 3036 if (sc->bge_flags & BGE_FLAG_MSI) 3037 pci_release_msi(dev); 3038 3039 if (sc->bge_res != NULL) 3040 bus_release_resource(dev, SYS_RES_MEMORY, 3041 BGE_PCI_BAR0, sc->bge_res); 3042 3043 if (sc->bge_ifp != NULL) 3044 if_free(sc->bge_ifp); 3045 3046 bge_dma_free(sc); 3047 3048 if (mtx_initialized(&sc->bge_mtx)) /* XXX */ 3049 BGE_LOCK_DESTROY(sc); 3050 } 3051 3052 static int 3053 bge_reset(struct bge_softc *sc) 3054 { 3055 device_t dev; 3056 uint32_t cachesize, command, pcistate, reset, val; 3057 void (*write_op)(struct bge_softc *, int, int); 3058 uint16_t devctl; 3059 int i; 3060 3061 dev = sc->bge_dev; 3062 3063 if (BGE_IS_575X_PLUS(sc) && !BGE_IS_5714_FAMILY(sc) && 3064 (sc->bge_asicrev != BGE_ASICREV_BCM5906)) { 3065 if (sc->bge_flags & BGE_FLAG_PCIE) 3066 write_op = bge_writemem_direct; 3067 else 3068 write_op = bge_writemem_ind; 3069 } else 3070 write_op = bge_writereg_ind; 3071 3072 /* Save some important PCI state. */ 3073 cachesize = pci_read_config(dev, BGE_PCI_CACHESZ, 4); 3074 command = pci_read_config(dev, BGE_PCI_CMD, 4); 3075 pcistate = pci_read_config(dev, BGE_PCI_PCISTATE, 4); 3076 3077 pci_write_config(dev, BGE_PCI_MISC_CTL, 3078 BGE_PCIMISCCTL_INDIRECT_ACCESS | BGE_PCIMISCCTL_MASK_PCI_INTR | 3079 BGE_HIF_SWAP_OPTIONS | BGE_PCIMISCCTL_PCISTATE_RW, 4); 3080 3081 /* Disable fastboot on controllers that support it. */ 3082 if (sc->bge_asicrev == BGE_ASICREV_BCM5752 || 3083 BGE_IS_5755_PLUS(sc)) { 3084 if (bootverbose) 3085 device_printf(sc->bge_dev, "Disabling fastboot\n"); 3086 CSR_WRITE_4(sc, BGE_FASTBOOT_PC, 0x0); 3087 } 3088 3089 /* 3090 * Write the magic number to SRAM at offset 0xB50. 3091 * When firmware finishes its initialization it will 3092 * write ~BGE_MAGIC_NUMBER to the same location. 3093 */ 3094 bge_writemem_ind(sc, BGE_SOFTWARE_GENCOMM, BGE_MAGIC_NUMBER); 3095 3096 reset = BGE_MISCCFG_RESET_CORE_CLOCKS | BGE_32BITTIME_66MHZ; 3097 3098 /* XXX: Broadcom Linux driver. */ 3099 if (sc->bge_flags & BGE_FLAG_PCIE) { 3100 if (CSR_READ_4(sc, 0x7E2C) == 0x60) /* PCIE 1.0 */ 3101 CSR_WRITE_4(sc, 0x7E2C, 0x20); 3102 if (sc->bge_chipid != BGE_CHIPID_BCM5750_A0) { 3103 /* Prevent PCIE link training during global reset */ 3104 CSR_WRITE_4(sc, BGE_MISC_CFG, 1 << 29); 3105 reset |= 1 << 29; 3106 } 3107 } 3108 3109 /* 3110 * Set GPHY Power Down Override to leave GPHY 3111 * powered up in D0 uninitialized. 3112 */ 3113 if (BGE_IS_5705_PLUS(sc)) 3114 reset |= 0x04000000; 3115 3116 /* Issue global reset */ 3117 write_op(sc, BGE_MISC_CFG, reset); 3118 3119 if (sc->bge_asicrev == BGE_ASICREV_BCM5906) { 3120 val = CSR_READ_4(sc, BGE_VCPU_STATUS); 3121 CSR_WRITE_4(sc, BGE_VCPU_STATUS, 3122 val | BGE_VCPU_STATUS_DRV_RESET); 3123 val = CSR_READ_4(sc, BGE_VCPU_EXT_CTRL); 3124 CSR_WRITE_4(sc, BGE_VCPU_EXT_CTRL, 3125 val & ~BGE_VCPU_EXT_CTRL_HALT_CPU); 3126 } 3127 3128 DELAY(1000); 3129 3130 /* XXX: Broadcom Linux driver. */ 3131 if (sc->bge_flags & BGE_FLAG_PCIE) { 3132 if (sc->bge_chipid == BGE_CHIPID_BCM5750_A0) { 3133 DELAY(500000); /* wait for link training to complete */ 3134 val = pci_read_config(dev, 0xC4, 4); 3135 pci_write_config(dev, 0xC4, val | (1 << 15), 4); 3136 } 3137 devctl = pci_read_config(dev, 3138 sc->bge_expcap + PCIR_EXPRESS_DEVICE_CTL, 2); 3139 /* Clear enable no snoop and disable relaxed ordering. */ 3140 devctl &= ~(0x0010 | 0x0800); 3141 /* Set PCIE max payload size to 128. */ 3142 devctl &= ~PCIM_EXP_CTL_MAX_PAYLOAD; 3143 pci_write_config(dev, sc->bge_expcap + PCIR_EXPRESS_DEVICE_CTL, 3144 devctl, 2); 3145 /* Clear error status. */ 3146 pci_write_config(dev, sc->bge_expcap + PCIR_EXPRESS_DEVICE_STA, 3147 0, 2); 3148 } 3149 3150 /* Reset some of the PCI state that got zapped by reset. */ 3151 pci_write_config(dev, BGE_PCI_MISC_CTL, 3152 BGE_PCIMISCCTL_INDIRECT_ACCESS | BGE_PCIMISCCTL_MASK_PCI_INTR | 3153 BGE_HIF_SWAP_OPTIONS | BGE_PCIMISCCTL_PCISTATE_RW, 4); 3154 pci_write_config(dev, BGE_PCI_CACHESZ, cachesize, 4); 3155 pci_write_config(dev, BGE_PCI_CMD, command, 4); 3156 write_op(sc, BGE_MISC_CFG, BGE_32BITTIME_66MHZ); 3157 3158 /* Re-enable MSI, if neccesary, and enable the memory arbiter. */ 3159 if (BGE_IS_5714_FAMILY(sc)) { 3160 /* This chip disables MSI on reset. */ 3161 if (sc->bge_flags & BGE_FLAG_MSI) { 3162 val = pci_read_config(dev, 3163 sc->bge_msicap + PCIR_MSI_CTRL, 2); 3164 pci_write_config(dev, 3165 sc->bge_msicap + PCIR_MSI_CTRL, 3166 val | PCIM_MSICTRL_MSI_ENABLE, 2); 3167 val = CSR_READ_4(sc, BGE_MSI_MODE); 3168 CSR_WRITE_4(sc, BGE_MSI_MODE, 3169 val | BGE_MSIMODE_ENABLE); 3170 } 3171 val = CSR_READ_4(sc, BGE_MARB_MODE); 3172 CSR_WRITE_4(sc, BGE_MARB_MODE, BGE_MARBMODE_ENABLE | val); 3173 } else 3174 CSR_WRITE_4(sc, BGE_MARB_MODE, BGE_MARBMODE_ENABLE); 3175 3176 if (sc->bge_asicrev == BGE_ASICREV_BCM5906) { 3177 for (i = 0; i < BGE_TIMEOUT; i++) { 3178 val = CSR_READ_4(sc, BGE_VCPU_STATUS); 3179 if (val & BGE_VCPU_STATUS_INIT_DONE) 3180 break; 3181 DELAY(100); 3182 } 3183 if (i == BGE_TIMEOUT) { 3184 device_printf(sc->bge_dev, "reset timed out\n"); 3185 return (1); 3186 } 3187 } else { 3188 /* 3189 * Poll until we see the 1's complement of the magic number. 3190 * This indicates that the firmware initialization is complete. 3191 * We expect this to fail if no chip containing the Ethernet 3192 * address is fitted though. 3193 */ 3194 for (i = 0; i < BGE_TIMEOUT; i++) { 3195 DELAY(10); 3196 val = bge_readmem_ind(sc, BGE_SOFTWARE_GENCOMM); 3197 if (val == ~BGE_MAGIC_NUMBER) 3198 break; 3199 } 3200 3201 if ((sc->bge_flags & BGE_FLAG_EADDR) && i == BGE_TIMEOUT) 3202 device_printf(sc->bge_dev, "firmware handshake timed out, " 3203 "found 0x%08x\n", val); 3204 } 3205 3206 /* 3207 * XXX Wait for the value of the PCISTATE register to 3208 * return to its original pre-reset state. This is a 3209 * fairly good indicator of reset completion. If we don't 3210 * wait for the reset to fully complete, trying to read 3211 * from the device's non-PCI registers may yield garbage 3212 * results. 3213 */ 3214 for (i = 0; i < BGE_TIMEOUT; i++) { 3215 if (pci_read_config(dev, BGE_PCI_PCISTATE, 4) == pcistate) 3216 break; 3217 DELAY(10); 3218 } 3219 3220 if (sc->bge_flags & BGE_FLAG_PCIE) { 3221 reset = bge_readmem_ind(sc, 0x7C00); 3222 bge_writemem_ind(sc, 0x7C00, reset | (1 << 25)); 3223 } 3224 3225 /* Fix up byte swapping. */ 3226 CSR_WRITE_4(sc, BGE_MODE_CTL, BGE_DMA_SWAP_OPTIONS | 3227 BGE_MODECTL_BYTESWAP_DATA); 3228 3229 /* Tell the ASF firmware we are up */ 3230 if (sc->bge_asf_mode & ASF_STACKUP) 3231 BGE_SETBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP); 3232 3233 CSR_WRITE_4(sc, BGE_MAC_MODE, 0); 3234 3235 /* 3236 * The 5704 in TBI mode apparently needs some special 3237 * adjustment to insure the SERDES drive level is set 3238 * to 1.2V. 3239 */ 3240 if (sc->bge_asicrev == BGE_ASICREV_BCM5704 && 3241 sc->bge_flags & BGE_FLAG_TBI) { 3242 val = CSR_READ_4(sc, BGE_SERDES_CFG); 3243 val = (val & ~0xFFF) | 0x880; 3244 CSR_WRITE_4(sc, BGE_SERDES_CFG, val); 3245 } 3246 3247 /* XXX: Broadcom Linux driver. */ 3248 if (sc->bge_flags & BGE_FLAG_PCIE && 3249 sc->bge_chipid != BGE_CHIPID_BCM5750_A0) { 3250 val = CSR_READ_4(sc, 0x7C00); 3251 CSR_WRITE_4(sc, 0x7C00, val | (1 << 25)); 3252 } 3253 DELAY(10000); 3254 3255 return(0); 3256 } 3257 3258 /* 3259 * Frame reception handling. This is called if there's a frame 3260 * on the receive return list. 3261 * 3262 * Note: we have to be able to handle two possibilities here: 3263 * 1) the frame is from the jumbo receive ring 3264 * 2) the frame is from the standard receive ring 3265 */ 3266 3267 static int 3268 bge_rxeof(struct bge_softc *sc, uint16_t rx_prod, int holdlck) 3269 { 3270 struct ifnet *ifp; 3271 int rx_npkts = 0, stdcnt = 0, jumbocnt = 0; 3272 uint16_t rx_cons; 3273 3274 rx_cons = sc->bge_rx_saved_considx; 3275 3276 /* Nothing to do. */ 3277 if (rx_cons == rx_prod) 3278 return (rx_npkts); 3279 3280 ifp = sc->bge_ifp; 3281 3282 bus_dmamap_sync(sc->bge_cdata.bge_rx_return_ring_tag, 3283 sc->bge_cdata.bge_rx_return_ring_map, BUS_DMASYNC_POSTREAD); 3284 bus_dmamap_sync(sc->bge_cdata.bge_rx_std_ring_tag, 3285 sc->bge_cdata.bge_rx_std_ring_map, BUS_DMASYNC_POSTWRITE); 3286 if (ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN + ETHER_VLAN_ENCAP_LEN > 3287 (MCLBYTES - ETHER_ALIGN)) 3288 bus_dmamap_sync(sc->bge_cdata.bge_rx_jumbo_ring_tag, 3289 sc->bge_cdata.bge_rx_jumbo_ring_map, BUS_DMASYNC_POSTWRITE); 3290 3291 while (rx_cons != rx_prod) { 3292 struct bge_rx_bd *cur_rx; 3293 uint32_t rxidx; 3294 struct mbuf *m = NULL; 3295 uint16_t vlan_tag = 0; 3296 int have_tag = 0; 3297 3298 #ifdef DEVICE_POLLING 3299 if (ifp->if_capenable & IFCAP_POLLING) { 3300 if (sc->rxcycles <= 0) 3301 break; 3302 sc->rxcycles--; 3303 } 3304 #endif 3305 3306 cur_rx = &sc->bge_ldata.bge_rx_return_ring[rx_cons]; 3307 3308 rxidx = cur_rx->bge_idx; 3309 BGE_INC(rx_cons, sc->bge_return_ring_cnt); 3310 3311 if (ifp->if_capenable & IFCAP_VLAN_HWTAGGING && 3312 cur_rx->bge_flags & BGE_RXBDFLAG_VLAN_TAG) { 3313 have_tag = 1; 3314 vlan_tag = cur_rx->bge_vlan_tag; 3315 } 3316 3317 if (cur_rx->bge_flags & BGE_RXBDFLAG_JUMBO_RING) { 3318 jumbocnt++; 3319 m = sc->bge_cdata.bge_rx_jumbo_chain[rxidx]; 3320 if (cur_rx->bge_flags & BGE_RXBDFLAG_ERROR) { 3321 BGE_INC(sc->bge_jumbo, BGE_JUMBO_RX_RING_CNT); 3322 continue; 3323 } 3324 if (bge_newbuf_jumbo(sc, rxidx) != 0) { 3325 BGE_INC(sc->bge_jumbo, BGE_JUMBO_RX_RING_CNT); 3326 ifp->if_iqdrops++; 3327 continue; 3328 } 3329 BGE_INC(sc->bge_jumbo, BGE_JUMBO_RX_RING_CNT); 3330 } else { 3331 stdcnt++; 3332 if (cur_rx->bge_flags & BGE_RXBDFLAG_ERROR) { 3333 BGE_INC(sc->bge_std, BGE_STD_RX_RING_CNT); 3334 continue; 3335 } 3336 m = sc->bge_cdata.bge_rx_std_chain[rxidx]; 3337 if (bge_newbuf_std(sc, rxidx) != 0) { 3338 BGE_INC(sc->bge_std, BGE_STD_RX_RING_CNT); 3339 ifp->if_iqdrops++; 3340 continue; 3341 } 3342 BGE_INC(sc->bge_std, BGE_STD_RX_RING_CNT); 3343 } 3344 3345 ifp->if_ipackets++; 3346 #ifndef __NO_STRICT_ALIGNMENT 3347 /* 3348 * For architectures with strict alignment we must make sure 3349 * the payload is aligned. 3350 */ 3351 if (sc->bge_flags & BGE_FLAG_RX_ALIGNBUG) { 3352 bcopy(m->m_data, m->m_data + ETHER_ALIGN, 3353 cur_rx->bge_len); 3354 m->m_data += ETHER_ALIGN; 3355 } 3356 #endif 3357 m->m_pkthdr.len = m->m_len = cur_rx->bge_len - ETHER_CRC_LEN; 3358 m->m_pkthdr.rcvif = ifp; 3359 3360 if (ifp->if_capenable & IFCAP_RXCSUM) { 3361 if (cur_rx->bge_flags & BGE_RXBDFLAG_IP_CSUM) { 3362 m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED; 3363 if ((cur_rx->bge_ip_csum ^ 0xFFFF) == 0) 3364 m->m_pkthdr.csum_flags |= CSUM_IP_VALID; 3365 } 3366 if (cur_rx->bge_flags & BGE_RXBDFLAG_TCP_UDP_CSUM && 3367 m->m_pkthdr.len >= ETHER_MIN_NOPAD) { 3368 m->m_pkthdr.csum_data = 3369 cur_rx->bge_tcp_udp_csum; 3370 m->m_pkthdr.csum_flags |= 3371 CSUM_DATA_VALID | CSUM_PSEUDO_HDR; 3372 } 3373 } 3374 3375 /* 3376 * If we received a packet with a vlan tag, 3377 * attach that information to the packet. 3378 */ 3379 if (have_tag) { 3380 #if __FreeBSD_version > 700022 3381 m->m_pkthdr.ether_vtag = vlan_tag; 3382 m->m_flags |= M_VLANTAG; 3383 #else 3384 VLAN_INPUT_TAG_NEW(ifp, m, vlan_tag); 3385 if (m == NULL) 3386 continue; 3387 #endif 3388 } 3389 3390 if (holdlck != 0) { 3391 BGE_UNLOCK(sc); 3392 (*ifp->if_input)(ifp, m); 3393 BGE_LOCK(sc); 3394 } else 3395 (*ifp->if_input)(ifp, m); 3396 rx_npkts++; 3397 3398 if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) 3399 return (rx_npkts); 3400 } 3401 3402 bus_dmamap_sync(sc->bge_cdata.bge_rx_return_ring_tag, 3403 sc->bge_cdata.bge_rx_return_ring_map, BUS_DMASYNC_PREREAD); 3404 if (stdcnt > 0) 3405 bus_dmamap_sync(sc->bge_cdata.bge_rx_std_ring_tag, 3406 sc->bge_cdata.bge_rx_std_ring_map, BUS_DMASYNC_PREWRITE); 3407 3408 if (jumbocnt > 0) 3409 bus_dmamap_sync(sc->bge_cdata.bge_rx_jumbo_ring_tag, 3410 sc->bge_cdata.bge_rx_jumbo_ring_map, BUS_DMASYNC_PREWRITE); 3411 3412 sc->bge_rx_saved_considx = rx_cons; 3413 bge_writembx(sc, BGE_MBX_RX_CONS0_LO, sc->bge_rx_saved_considx); 3414 if (stdcnt) 3415 bge_writembx(sc, BGE_MBX_RX_STD_PROD_LO, sc->bge_std); 3416 if (jumbocnt) 3417 bge_writembx(sc, BGE_MBX_RX_JUMBO_PROD_LO, sc->bge_jumbo); 3418 #ifdef notyet 3419 /* 3420 * This register wraps very quickly under heavy packet drops. 3421 * If you need correct statistics, you can enable this check. 3422 */ 3423 if (BGE_IS_5705_PLUS(sc)) 3424 ifp->if_ierrors += CSR_READ_4(sc, BGE_RXLP_LOCSTAT_IFIN_DROPS); 3425 #endif 3426 return (rx_npkts); 3427 } 3428 3429 static void 3430 bge_txeof(struct bge_softc *sc, uint16_t tx_cons) 3431 { 3432 struct bge_tx_bd *cur_tx = NULL; 3433 struct ifnet *ifp; 3434 3435 BGE_LOCK_ASSERT(sc); 3436 3437 /* Nothing to do. */ 3438 if (sc->bge_tx_saved_considx == tx_cons) 3439 return; 3440 3441 ifp = sc->bge_ifp; 3442 3443 bus_dmamap_sync(sc->bge_cdata.bge_tx_ring_tag, 3444 sc->bge_cdata.bge_tx_ring_map, BUS_DMASYNC_POSTWRITE); 3445 /* 3446 * Go through our tx ring and free mbufs for those 3447 * frames that have been sent. 3448 */ 3449 while (sc->bge_tx_saved_considx != tx_cons) { 3450 uint32_t idx = 0; 3451 3452 idx = sc->bge_tx_saved_considx; 3453 cur_tx = &sc->bge_ldata.bge_tx_ring[idx]; 3454 if (cur_tx->bge_flags & BGE_TXBDFLAG_END) 3455 ifp->if_opackets++; 3456 if (sc->bge_cdata.bge_tx_chain[idx] != NULL) { 3457 bus_dmamap_sync(sc->bge_cdata.bge_tx_mtag, 3458 sc->bge_cdata.bge_tx_dmamap[idx], 3459 BUS_DMASYNC_POSTWRITE); 3460 bus_dmamap_unload(sc->bge_cdata.bge_tx_mtag, 3461 sc->bge_cdata.bge_tx_dmamap[idx]); 3462 m_freem(sc->bge_cdata.bge_tx_chain[idx]); 3463 sc->bge_cdata.bge_tx_chain[idx] = NULL; 3464 } 3465 sc->bge_txcnt--; 3466 BGE_INC(sc->bge_tx_saved_considx, BGE_TX_RING_CNT); 3467 } 3468 3469 if (cur_tx != NULL) 3470 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 3471 if (sc->bge_txcnt == 0) 3472 sc->bge_timer = 0; 3473 } 3474 3475 #ifdef DEVICE_POLLING 3476 static int 3477 bge_poll(struct ifnet *ifp, enum poll_cmd cmd, int count) 3478 { 3479 struct bge_softc *sc = ifp->if_softc; 3480 uint16_t rx_prod, tx_cons; 3481 uint32_t statusword; 3482 int rx_npkts = 0; 3483 3484 BGE_LOCK(sc); 3485 if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) { 3486 BGE_UNLOCK(sc); 3487 return (rx_npkts); 3488 } 3489 3490 bus_dmamap_sync(sc->bge_cdata.bge_status_tag, 3491 sc->bge_cdata.bge_status_map, 3492 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); 3493 rx_prod = sc->bge_ldata.bge_status_block->bge_idx[0].bge_rx_prod_idx; 3494 tx_cons = sc->bge_ldata.bge_status_block->bge_idx[0].bge_tx_cons_idx; 3495 3496 statusword = atomic_readandclear_32( 3497 &sc->bge_ldata.bge_status_block->bge_status); 3498 3499 bus_dmamap_sync(sc->bge_cdata.bge_status_tag, 3500 sc->bge_cdata.bge_status_map, 3501 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 3502 3503 /* Note link event. It will be processed by POLL_AND_CHECK_STATUS. */ 3504 if (statusword & BGE_STATFLAG_LINKSTATE_CHANGED) 3505 sc->bge_link_evt++; 3506 3507 if (cmd == POLL_AND_CHECK_STATUS) 3508 if ((sc->bge_asicrev == BGE_ASICREV_BCM5700 && 3509 sc->bge_chipid != BGE_CHIPID_BCM5700_B2) || 3510 sc->bge_link_evt || (sc->bge_flags & BGE_FLAG_TBI)) 3511 bge_link_upd(sc); 3512 3513 sc->rxcycles = count; 3514 rx_npkts = bge_rxeof(sc, rx_prod, 1); 3515 if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) { 3516 BGE_UNLOCK(sc); 3517 return (rx_npkts); 3518 } 3519 bge_txeof(sc, tx_cons); 3520 if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) 3521 bge_start_locked(ifp); 3522 3523 BGE_UNLOCK(sc); 3524 return (rx_npkts); 3525 } 3526 #endif /* DEVICE_POLLING */ 3527 3528 static int 3529 bge_msi_intr(void *arg) 3530 { 3531 struct bge_softc *sc; 3532 3533 sc = (struct bge_softc *)arg; 3534 /* 3535 * This interrupt is not shared and controller already 3536 * disabled further interrupt. 3537 */ 3538 taskqueue_enqueue(sc->bge_tq, &sc->bge_intr_task); 3539 return (FILTER_HANDLED); 3540 } 3541 3542 static void 3543 bge_intr_task(void *arg, int pending) 3544 { 3545 struct bge_softc *sc; 3546 struct ifnet *ifp; 3547 uint32_t status; 3548 uint16_t rx_prod, tx_cons; 3549 3550 sc = (struct bge_softc *)arg; 3551 ifp = sc->bge_ifp; 3552 3553 if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) 3554 return; 3555 3556 /* Get updated status block. */ 3557 bus_dmamap_sync(sc->bge_cdata.bge_status_tag, 3558 sc->bge_cdata.bge_status_map, 3559 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); 3560 3561 /* Save producer/consumer indexess. */ 3562 rx_prod = sc->bge_ldata.bge_status_block->bge_idx[0].bge_rx_prod_idx; 3563 tx_cons = sc->bge_ldata.bge_status_block->bge_idx[0].bge_tx_cons_idx; 3564 status = sc->bge_ldata.bge_status_block->bge_status; 3565 sc->bge_ldata.bge_status_block->bge_status = 0; 3566 bus_dmamap_sync(sc->bge_cdata.bge_status_tag, 3567 sc->bge_cdata.bge_status_map, 3568 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 3569 /* Let controller work. */ 3570 bge_writembx(sc, BGE_MBX_IRQ0_LO, 0); 3571 3572 if ((status & BGE_STATFLAG_LINKSTATE_CHANGED) != 0) { 3573 BGE_LOCK(sc); 3574 bge_link_upd(sc); 3575 BGE_UNLOCK(sc); 3576 } 3577 if (ifp->if_drv_flags & IFF_DRV_RUNNING) { 3578 /* Check RX return ring producer/consumer. */ 3579 bge_rxeof(sc, rx_prod, 0); 3580 } 3581 if (ifp->if_drv_flags & IFF_DRV_RUNNING) { 3582 BGE_LOCK(sc); 3583 /* Check TX ring producer/consumer. */ 3584 bge_txeof(sc, tx_cons); 3585 if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) 3586 bge_start_locked(ifp); 3587 BGE_UNLOCK(sc); 3588 } 3589 } 3590 3591 static void 3592 bge_intr(void *xsc) 3593 { 3594 struct bge_softc *sc; 3595 struct ifnet *ifp; 3596 uint32_t statusword; 3597 uint16_t rx_prod, tx_cons; 3598 3599 sc = xsc; 3600 3601 BGE_LOCK(sc); 3602 3603 ifp = sc->bge_ifp; 3604 3605 #ifdef DEVICE_POLLING 3606 if (ifp->if_capenable & IFCAP_POLLING) { 3607 BGE_UNLOCK(sc); 3608 return; 3609 } 3610 #endif 3611 3612 /* 3613 * Ack the interrupt by writing something to BGE_MBX_IRQ0_LO. Don't 3614 * disable interrupts by writing nonzero like we used to, since with 3615 * our current organization this just gives complications and 3616 * pessimizations for re-enabling interrupts. We used to have races 3617 * instead of the necessary complications. Disabling interrupts 3618 * would just reduce the chance of a status update while we are 3619 * running (by switching to the interrupt-mode coalescence 3620 * parameters), but this chance is already very low so it is more 3621 * efficient to get another interrupt than prevent it. 3622 * 3623 * We do the ack first to ensure another interrupt if there is a 3624 * status update after the ack. We don't check for the status 3625 * changing later because it is more efficient to get another 3626 * interrupt than prevent it, not quite as above (not checking is 3627 * a smaller optimization than not toggling the interrupt enable, 3628 * since checking doesn't involve PCI accesses and toggling require 3629 * the status check). So toggling would probably be a pessimization 3630 * even with MSI. It would only be needed for using a task queue. 3631 */ 3632 bge_writembx(sc, BGE_MBX_IRQ0_LO, 0); 3633 3634 /* 3635 * Do the mandatory PCI flush as well as get the link status. 3636 */ 3637 statusword = CSR_READ_4(sc, BGE_MAC_STS) & BGE_MACSTAT_LINK_CHANGED; 3638 3639 /* Make sure the descriptor ring indexes are coherent. */ 3640 bus_dmamap_sync(sc->bge_cdata.bge_status_tag, 3641 sc->bge_cdata.bge_status_map, 3642 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); 3643 rx_prod = sc->bge_ldata.bge_status_block->bge_idx[0].bge_rx_prod_idx; 3644 tx_cons = sc->bge_ldata.bge_status_block->bge_idx[0].bge_tx_cons_idx; 3645 sc->bge_ldata.bge_status_block->bge_status = 0; 3646 bus_dmamap_sync(sc->bge_cdata.bge_status_tag, 3647 sc->bge_cdata.bge_status_map, 3648 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 3649 3650 if ((sc->bge_asicrev == BGE_ASICREV_BCM5700 && 3651 sc->bge_chipid != BGE_CHIPID_BCM5700_B2) || 3652 statusword || sc->bge_link_evt) 3653 bge_link_upd(sc); 3654 3655 if (ifp->if_drv_flags & IFF_DRV_RUNNING) { 3656 /* Check RX return ring producer/consumer. */ 3657 bge_rxeof(sc, rx_prod, 1); 3658 } 3659 3660 if (ifp->if_drv_flags & IFF_DRV_RUNNING) { 3661 /* Check TX ring producer/consumer. */ 3662 bge_txeof(sc, tx_cons); 3663 } 3664 3665 if (ifp->if_drv_flags & IFF_DRV_RUNNING && 3666 !IFQ_DRV_IS_EMPTY(&ifp->if_snd)) 3667 bge_start_locked(ifp); 3668 3669 BGE_UNLOCK(sc); 3670 } 3671 3672 static void 3673 bge_asf_driver_up(struct bge_softc *sc) 3674 { 3675 if (sc->bge_asf_mode & ASF_STACKUP) { 3676 /* Send ASF heartbeat aprox. every 2s */ 3677 if (sc->bge_asf_count) 3678 sc->bge_asf_count --; 3679 else { 3680 sc->bge_asf_count = 5; 3681 bge_writemem_ind(sc, BGE_SOFTWARE_GENCOMM_FW, 3682 BGE_FW_DRV_ALIVE); 3683 bge_writemem_ind(sc, BGE_SOFTWARE_GENNCOMM_FW_LEN, 4); 3684 bge_writemem_ind(sc, BGE_SOFTWARE_GENNCOMM_FW_DATA, 3); 3685 CSR_WRITE_4(sc, BGE_CPU_EVENT, 3686 CSR_READ_4(sc, BGE_CPU_EVENT) | (1 << 14)); 3687 } 3688 } 3689 } 3690 3691 static void 3692 bge_tick(void *xsc) 3693 { 3694 struct bge_softc *sc = xsc; 3695 struct mii_data *mii = NULL; 3696 3697 BGE_LOCK_ASSERT(sc); 3698 3699 /* Synchronize with possible callout reset/stop. */ 3700 if (callout_pending(&sc->bge_stat_ch) || 3701 !callout_active(&sc->bge_stat_ch)) 3702 return; 3703 3704 if (BGE_IS_5705_PLUS(sc)) 3705 bge_stats_update_regs(sc); 3706 else 3707 bge_stats_update(sc); 3708 3709 if ((sc->bge_flags & BGE_FLAG_TBI) == 0) { 3710 mii = device_get_softc(sc->bge_miibus); 3711 /* 3712 * Do not touch PHY if we have link up. This could break 3713 * IPMI/ASF mode or produce extra input errors 3714 * (extra errors was reported for bcm5701 & bcm5704). 3715 */ 3716 if (!sc->bge_link) 3717 mii_tick(mii); 3718 } else { 3719 /* 3720 * Since in TBI mode auto-polling can't be used we should poll 3721 * link status manually. Here we register pending link event 3722 * and trigger interrupt. 3723 */ 3724 #ifdef DEVICE_POLLING 3725 /* In polling mode we poll link state in bge_poll(). */ 3726 if (!(sc->bge_ifp->if_capenable & IFCAP_POLLING)) 3727 #endif 3728 { 3729 sc->bge_link_evt++; 3730 if (sc->bge_asicrev == BGE_ASICREV_BCM5700 || 3731 sc->bge_flags & BGE_FLAG_5788) 3732 BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_INTR_SET); 3733 else 3734 BGE_SETBIT(sc, BGE_HCC_MODE, BGE_HCCMODE_COAL_NOW); 3735 } 3736 } 3737 3738 bge_asf_driver_up(sc); 3739 bge_watchdog(sc); 3740 3741 callout_reset(&sc->bge_stat_ch, hz, bge_tick, sc); 3742 } 3743 3744 static void 3745 bge_stats_update_regs(struct bge_softc *sc) 3746 { 3747 struct ifnet *ifp; 3748 3749 ifp = sc->bge_ifp; 3750 3751 ifp->if_collisions += CSR_READ_4(sc, BGE_MAC_STATS + 3752 offsetof(struct bge_mac_stats_regs, etherStatsCollisions)); 3753 3754 ifp->if_ierrors += CSR_READ_4(sc, BGE_RXLP_LOCSTAT_OUT_OF_BDS); 3755 ifp->if_ierrors += CSR_READ_4(sc, BGE_RXLP_LOCSTAT_IFIN_DROPS); 3756 ifp->if_ierrors += CSR_READ_4(sc, BGE_RXLP_LOCSTAT_IFIN_ERRORS); 3757 } 3758 3759 static void 3760 bge_stats_update(struct bge_softc *sc) 3761 { 3762 struct ifnet *ifp; 3763 bus_size_t stats; 3764 uint32_t cnt; /* current register value */ 3765 3766 ifp = sc->bge_ifp; 3767 3768 stats = BGE_MEMWIN_START + BGE_STATS_BLOCK; 3769 3770 #define READ_STAT(sc, stats, stat) \ 3771 CSR_READ_4(sc, stats + offsetof(struct bge_stats, stat)) 3772 3773 cnt = READ_STAT(sc, stats, txstats.etherStatsCollisions.bge_addr_lo); 3774 ifp->if_collisions += (uint32_t)(cnt - sc->bge_tx_collisions); 3775 sc->bge_tx_collisions = cnt; 3776 3777 cnt = READ_STAT(sc, stats, ifInDiscards.bge_addr_lo); 3778 ifp->if_ierrors += (uint32_t)(cnt - sc->bge_rx_discards); 3779 sc->bge_rx_discards = cnt; 3780 3781 cnt = READ_STAT(sc, stats, txstats.ifOutDiscards.bge_addr_lo); 3782 ifp->if_oerrors += (uint32_t)(cnt - sc->bge_tx_discards); 3783 sc->bge_tx_discards = cnt; 3784 3785 #undef READ_STAT 3786 } 3787 3788 /* 3789 * Pad outbound frame to ETHER_MIN_NOPAD for an unusual reason. 3790 * The bge hardware will pad out Tx runts to ETHER_MIN_NOPAD, 3791 * but when such padded frames employ the bge IP/TCP checksum offload, 3792 * the hardware checksum assist gives incorrect results (possibly 3793 * from incorporating its own padding into the UDP/TCP checksum; who knows). 3794 * If we pad such runts with zeros, the onboard checksum comes out correct. 3795 */ 3796 static __inline int 3797 bge_cksum_pad(struct mbuf *m) 3798 { 3799 int padlen = ETHER_MIN_NOPAD - m->m_pkthdr.len; 3800 struct mbuf *last; 3801 3802 /* If there's only the packet-header and we can pad there, use it. */ 3803 if (m->m_pkthdr.len == m->m_len && M_WRITABLE(m) && 3804 M_TRAILINGSPACE(m) >= padlen) { 3805 last = m; 3806 } else { 3807 /* 3808 * Walk packet chain to find last mbuf. We will either 3809 * pad there, or append a new mbuf and pad it. 3810 */ 3811 for (last = m; last->m_next != NULL; last = last->m_next); 3812 if (!(M_WRITABLE(last) && M_TRAILINGSPACE(last) >= padlen)) { 3813 /* Allocate new empty mbuf, pad it. Compact later. */ 3814 struct mbuf *n; 3815 3816 MGET(n, M_DONTWAIT, MT_DATA); 3817 if (n == NULL) 3818 return (ENOBUFS); 3819 n->m_len = 0; 3820 last->m_next = n; 3821 last = n; 3822 } 3823 } 3824 3825 /* Now zero the pad area, to avoid the bge cksum-assist bug. */ 3826 memset(mtod(last, caddr_t) + last->m_len, 0, padlen); 3827 last->m_len += padlen; 3828 m->m_pkthdr.len += padlen; 3829 3830 return (0); 3831 } 3832 3833 static struct mbuf * 3834 bge_setup_tso(struct bge_softc *sc, struct mbuf *m, uint16_t *mss) 3835 { 3836 struct ether_header *eh; 3837 struct ip *ip; 3838 struct tcphdr *tcp; 3839 struct mbuf *n; 3840 uint16_t hlen; 3841 uint32_t ip_off, poff; 3842 3843 if (M_WRITABLE(m) == 0) { 3844 /* Get a writable copy. */ 3845 n = m_dup(m, M_DONTWAIT); 3846 m_freem(m); 3847 if (n == NULL) 3848 return (NULL); 3849 m = n; 3850 } 3851 ip_off = sizeof(struct ether_header); 3852 m = m_pullup(m, ip_off); 3853 if (m == NULL) 3854 return (NULL); 3855 eh = mtod(m, struct ether_header *); 3856 /* Check the existence of VLAN tag. */ 3857 if (eh->ether_type == htons(ETHERTYPE_VLAN)) { 3858 ip_off = sizeof(struct ether_vlan_header); 3859 m = m_pullup(m, ip_off); 3860 if (m == NULL) 3861 return (NULL); 3862 } 3863 m = m_pullup(m, ip_off + sizeof(struct ip)); 3864 if (m == NULL) 3865 return (NULL); 3866 ip = (struct ip *)(mtod(m, char *) + ip_off); 3867 poff = ip_off + (ip->ip_hl << 2); 3868 m = m_pullup(m, poff + sizeof(struct tcphdr)); 3869 if (m == NULL) 3870 return (NULL); 3871 tcp = (struct tcphdr *)(mtod(m, char *) + poff); 3872 m = m_pullup(m, poff + sizeof(struct tcphdr) + tcp->th_off); 3873 if (m == NULL) 3874 return (NULL); 3875 /* 3876 * It seems controller doesn't modify IP length and TCP pseudo 3877 * checksum. These checksum computed by upper stack should be 0. 3878 */ 3879 *mss = m->m_pkthdr.tso_segsz; 3880 ip->ip_sum = 0; 3881 ip->ip_len = htons(*mss + (ip->ip_hl << 2) + (tcp->th_off << 2)); 3882 /* Clear pseudo checksum computed by TCP stack. */ 3883 tcp->th_sum = 0; 3884 /* 3885 * Broadcom controllers uses different descriptor format for 3886 * TSO depending on ASIC revision. Due to TSO-capable firmware 3887 * license issue and lower performance of firmware based TSO 3888 * we only support hardware based TSO which is applicable for 3889 * BCM5755 or newer controllers. Hardware based TSO uses 11 3890 * bits to store MSS and upper 5 bits are used to store IP/TCP 3891 * header length(including IP/TCP options). The header length 3892 * is expressed as 32 bits unit. 3893 */ 3894 hlen = ((ip->ip_hl << 2) + (tcp->th_off << 2)) >> 2; 3895 *mss |= (hlen << 11); 3896 return (m); 3897 } 3898 3899 /* 3900 * Encapsulate an mbuf chain in the tx ring by coupling the mbuf data 3901 * pointers to descriptors. 3902 */ 3903 static int 3904 bge_encap(struct bge_softc *sc, struct mbuf **m_head, uint32_t *txidx) 3905 { 3906 bus_dma_segment_t segs[BGE_NSEG_NEW]; 3907 bus_dmamap_t map; 3908 struct bge_tx_bd *d; 3909 struct mbuf *m = *m_head; 3910 uint32_t idx = *txidx; 3911 uint16_t csum_flags, mss, vlan_tag; 3912 int nsegs, i, error; 3913 3914 csum_flags = 0; 3915 mss = 0; 3916 vlan_tag = 0; 3917 if ((m->m_pkthdr.csum_flags & CSUM_TSO) != 0) { 3918 *m_head = m = bge_setup_tso(sc, m, &mss); 3919 if (*m_head == NULL) 3920 return (ENOBUFS); 3921 csum_flags |= BGE_TXBDFLAG_CPU_PRE_DMA | 3922 BGE_TXBDFLAG_CPU_POST_DMA; 3923 } else if ((m->m_pkthdr.csum_flags & BGE_CSUM_FEATURES) != 0) { 3924 if (m->m_pkthdr.csum_flags & CSUM_IP) 3925 csum_flags |= BGE_TXBDFLAG_IP_CSUM; 3926 if (m->m_pkthdr.csum_flags & (CSUM_TCP | CSUM_UDP)) { 3927 csum_flags |= BGE_TXBDFLAG_TCP_UDP_CSUM; 3928 if (m->m_pkthdr.len < ETHER_MIN_NOPAD && 3929 (error = bge_cksum_pad(m)) != 0) { 3930 m_freem(m); 3931 *m_head = NULL; 3932 return (error); 3933 } 3934 } 3935 if (m->m_flags & M_LASTFRAG) 3936 csum_flags |= BGE_TXBDFLAG_IP_FRAG_END; 3937 else if (m->m_flags & M_FRAG) 3938 csum_flags |= BGE_TXBDFLAG_IP_FRAG; 3939 } 3940 3941 if ((m->m_pkthdr.csum_flags & CSUM_TSO) == 0 && 3942 sc->bge_forced_collapse > 0 && 3943 (sc->bge_flags & BGE_FLAG_PCIE) != 0 && m->m_next != NULL) { 3944 /* 3945 * Forcedly collapse mbuf chains to overcome hardware 3946 * limitation which only support a single outstanding 3947 * DMA read operation. 3948 */ 3949 if (sc->bge_forced_collapse == 1) 3950 m = m_defrag(m, M_DONTWAIT); 3951 else 3952 m = m_collapse(m, M_DONTWAIT, sc->bge_forced_collapse); 3953 if (m == NULL) 3954 m = *m_head; 3955 *m_head = m; 3956 } 3957 3958 map = sc->bge_cdata.bge_tx_dmamap[idx]; 3959 error = bus_dmamap_load_mbuf_sg(sc->bge_cdata.bge_tx_mtag, map, m, segs, 3960 &nsegs, BUS_DMA_NOWAIT); 3961 if (error == EFBIG) { 3962 m = m_collapse(m, M_DONTWAIT, BGE_NSEG_NEW); 3963 if (m == NULL) { 3964 m_freem(*m_head); 3965 *m_head = NULL; 3966 return (ENOBUFS); 3967 } 3968 *m_head = m; 3969 error = bus_dmamap_load_mbuf_sg(sc->bge_cdata.bge_tx_mtag, map, 3970 m, segs, &nsegs, BUS_DMA_NOWAIT); 3971 if (error) { 3972 m_freem(m); 3973 *m_head = NULL; 3974 return (error); 3975 } 3976 } else if (error != 0) 3977 return (error); 3978 3979 /* Check if we have enough free send BDs. */ 3980 if (sc->bge_txcnt + nsegs >= BGE_TX_RING_CNT) { 3981 bus_dmamap_unload(sc->bge_cdata.bge_tx_mtag, map); 3982 return (ENOBUFS); 3983 } 3984 3985 bus_dmamap_sync(sc->bge_cdata.bge_tx_mtag, map, BUS_DMASYNC_PREWRITE); 3986 3987 #if __FreeBSD_version > 700022 3988 if (m->m_flags & M_VLANTAG) { 3989 csum_flags |= BGE_TXBDFLAG_VLAN_TAG; 3990 vlan_tag = m->m_pkthdr.ether_vtag; 3991 } 3992 #else 3993 { 3994 struct m_tag *mtag; 3995 3996 if ((mtag = VLAN_OUTPUT_TAG(sc->bge_ifp, m)) != NULL) { 3997 csum_flags |= BGE_TXBDFLAG_VLAN_TAG; 3998 vlan_tag = VLAN_TAG_VALUE(mtag); 3999 } 4000 } 4001 #endif 4002 for (i = 0; ; i++) { 4003 d = &sc->bge_ldata.bge_tx_ring[idx]; 4004 d->bge_addr.bge_addr_lo = BGE_ADDR_LO(segs[i].ds_addr); 4005 d->bge_addr.bge_addr_hi = BGE_ADDR_HI(segs[i].ds_addr); 4006 d->bge_len = segs[i].ds_len; 4007 d->bge_flags = csum_flags; 4008 d->bge_vlan_tag = vlan_tag; 4009 d->bge_mss = mss; 4010 if (i == nsegs - 1) 4011 break; 4012 BGE_INC(idx, BGE_TX_RING_CNT); 4013 } 4014 4015 /* Mark the last segment as end of packet... */ 4016 d->bge_flags |= BGE_TXBDFLAG_END; 4017 4018 /* 4019 * Insure that the map for this transmission 4020 * is placed at the array index of the last descriptor 4021 * in this chain. 4022 */ 4023 sc->bge_cdata.bge_tx_dmamap[*txidx] = sc->bge_cdata.bge_tx_dmamap[idx]; 4024 sc->bge_cdata.bge_tx_dmamap[idx] = map; 4025 sc->bge_cdata.bge_tx_chain[idx] = m; 4026 sc->bge_txcnt += nsegs; 4027 4028 BGE_INC(idx, BGE_TX_RING_CNT); 4029 *txidx = idx; 4030 4031 return (0); 4032 } 4033 4034 /* 4035 * Main transmit routine. To avoid having to do mbuf copies, we put pointers 4036 * to the mbuf data regions directly in the transmit descriptors. 4037 */ 4038 static void 4039 bge_start_locked(struct ifnet *ifp) 4040 { 4041 struct bge_softc *sc; 4042 struct mbuf *m_head; 4043 uint32_t prodidx; 4044 int count; 4045 4046 sc = ifp->if_softc; 4047 BGE_LOCK_ASSERT(sc); 4048 4049 if (!sc->bge_link || 4050 (ifp->if_drv_flags & (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)) != 4051 IFF_DRV_RUNNING) 4052 return; 4053 4054 prodidx = sc->bge_tx_prodidx; 4055 4056 for (count = 0; !IFQ_DRV_IS_EMPTY(&ifp->if_snd);) { 4057 if (sc->bge_txcnt > BGE_TX_RING_CNT - 16) { 4058 ifp->if_drv_flags |= IFF_DRV_OACTIVE; 4059 break; 4060 } 4061 IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head); 4062 if (m_head == NULL) 4063 break; 4064 4065 /* 4066 * XXX 4067 * The code inside the if() block is never reached since we 4068 * must mark CSUM_IP_FRAGS in our if_hwassist to start getting 4069 * requests to checksum TCP/UDP in a fragmented packet. 4070 * 4071 * XXX 4072 * safety overkill. If this is a fragmented packet chain 4073 * with delayed TCP/UDP checksums, then only encapsulate 4074 * it if we have enough descriptors to handle the entire 4075 * chain at once. 4076 * (paranoia -- may not actually be needed) 4077 */ 4078 if (m_head->m_flags & M_FIRSTFRAG && 4079 m_head->m_pkthdr.csum_flags & (CSUM_DELAY_DATA)) { 4080 if ((BGE_TX_RING_CNT - sc->bge_txcnt) < 4081 m_head->m_pkthdr.csum_data + 16) { 4082 IFQ_DRV_PREPEND(&ifp->if_snd, m_head); 4083 ifp->if_drv_flags |= IFF_DRV_OACTIVE; 4084 break; 4085 } 4086 } 4087 4088 /* 4089 * Pack the data into the transmit ring. If we 4090 * don't have room, set the OACTIVE flag and wait 4091 * for the NIC to drain the ring. 4092 */ 4093 if (bge_encap(sc, &m_head, &prodidx)) { 4094 if (m_head == NULL) 4095 break; 4096 IFQ_DRV_PREPEND(&ifp->if_snd, m_head); 4097 ifp->if_drv_flags |= IFF_DRV_OACTIVE; 4098 break; 4099 } 4100 ++count; 4101 4102 /* 4103 * If there's a BPF listener, bounce a copy of this frame 4104 * to him. 4105 */ 4106 #ifdef ETHER_BPF_MTAP 4107 ETHER_BPF_MTAP(ifp, m_head); 4108 #else 4109 BPF_MTAP(ifp, m_head); 4110 #endif 4111 } 4112 4113 if (count > 0) { 4114 bus_dmamap_sync(sc->bge_cdata.bge_tx_ring_tag, 4115 sc->bge_cdata.bge_tx_ring_map, BUS_DMASYNC_PREWRITE); 4116 /* Transmit. */ 4117 bge_writembx(sc, BGE_MBX_TX_HOST_PROD0_LO, prodidx); 4118 /* 5700 b2 errata */ 4119 if (sc->bge_chiprev == BGE_CHIPREV_5700_BX) 4120 bge_writembx(sc, BGE_MBX_TX_HOST_PROD0_LO, prodidx); 4121 4122 sc->bge_tx_prodidx = prodidx; 4123 4124 /* 4125 * Set a timeout in case the chip goes out to lunch. 4126 */ 4127 sc->bge_timer = 5; 4128 } 4129 } 4130 4131 /* 4132 * Main transmit routine. To avoid having to do mbuf copies, we put pointers 4133 * to the mbuf data regions directly in the transmit descriptors. 4134 */ 4135 static void 4136 bge_start(struct ifnet *ifp) 4137 { 4138 struct bge_softc *sc; 4139 4140 sc = ifp->if_softc; 4141 BGE_LOCK(sc); 4142 bge_start_locked(ifp); 4143 BGE_UNLOCK(sc); 4144 } 4145 4146 static void 4147 bge_init_locked(struct bge_softc *sc) 4148 { 4149 struct ifnet *ifp; 4150 uint16_t *m; 4151 4152 BGE_LOCK_ASSERT(sc); 4153 4154 ifp = sc->bge_ifp; 4155 4156 if (ifp->if_drv_flags & IFF_DRV_RUNNING) 4157 return; 4158 4159 /* Cancel pending I/O and flush buffers. */ 4160 bge_stop(sc); 4161 4162 bge_stop_fw(sc); 4163 bge_sig_pre_reset(sc, BGE_RESET_START); 4164 bge_reset(sc); 4165 bge_sig_legacy(sc, BGE_RESET_START); 4166 bge_sig_post_reset(sc, BGE_RESET_START); 4167 4168 bge_chipinit(sc); 4169 4170 /* 4171 * Init the various state machines, ring 4172 * control blocks and firmware. 4173 */ 4174 if (bge_blockinit(sc)) { 4175 device_printf(sc->bge_dev, "initialization failure\n"); 4176 return; 4177 } 4178 4179 ifp = sc->bge_ifp; 4180 4181 /* Specify MTU. */ 4182 CSR_WRITE_4(sc, BGE_RX_MTU, ifp->if_mtu + 4183 ETHER_HDR_LEN + ETHER_CRC_LEN + 4184 (ifp->if_capenable & IFCAP_VLAN_MTU ? ETHER_VLAN_ENCAP_LEN : 0)); 4185 4186 /* Load our MAC address. */ 4187 m = (uint16_t *)IF_LLADDR(sc->bge_ifp); 4188 CSR_WRITE_4(sc, BGE_MAC_ADDR1_LO, htons(m[0])); 4189 CSR_WRITE_4(sc, BGE_MAC_ADDR1_HI, (htons(m[1]) << 16) | htons(m[2])); 4190 4191 /* Program promiscuous mode. */ 4192 bge_setpromisc(sc); 4193 4194 /* Program multicast filter. */ 4195 bge_setmulti(sc); 4196 4197 /* Program VLAN tag stripping. */ 4198 bge_setvlan(sc); 4199 4200 /* Init RX ring. */ 4201 if (bge_init_rx_ring_std(sc) != 0) { 4202 device_printf(sc->bge_dev, "no memory for std Rx buffers.\n"); 4203 bge_stop(sc); 4204 return; 4205 } 4206 4207 /* 4208 * Workaround for a bug in 5705 ASIC rev A0. Poll the NIC's 4209 * memory to insure that the chip has in fact read the first 4210 * entry of the ring. 4211 */ 4212 if (sc->bge_chipid == BGE_CHIPID_BCM5705_A0) { 4213 uint32_t v, i; 4214 for (i = 0; i < 10; i++) { 4215 DELAY(20); 4216 v = bge_readmem_ind(sc, BGE_STD_RX_RINGS + 8); 4217 if (v == (MCLBYTES - ETHER_ALIGN)) 4218 break; 4219 } 4220 if (i == 10) 4221 device_printf (sc->bge_dev, 4222 "5705 A0 chip failed to load RX ring\n"); 4223 } 4224 4225 /* Init jumbo RX ring. */ 4226 if (ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN + ETHER_VLAN_ENCAP_LEN > 4227 (MCLBYTES - ETHER_ALIGN)) { 4228 if (bge_init_rx_ring_jumbo(sc) != 0) { 4229 device_printf(sc->bge_dev, "no memory for std Rx buffers.\n"); 4230 bge_stop(sc); 4231 return; 4232 } 4233 } 4234 4235 /* Init our RX return ring index. */ 4236 sc->bge_rx_saved_considx = 0; 4237 4238 /* Init our RX/TX stat counters. */ 4239 sc->bge_rx_discards = sc->bge_tx_discards = sc->bge_tx_collisions = 0; 4240 4241 /* Init TX ring. */ 4242 bge_init_tx_ring(sc); 4243 4244 /* Turn on transmitter. */ 4245 BGE_SETBIT(sc, BGE_TX_MODE, BGE_TXMODE_ENABLE); 4246 4247 /* Turn on receiver. */ 4248 BGE_SETBIT(sc, BGE_RX_MODE, BGE_RXMODE_ENABLE); 4249 4250 /* Tell firmware we're alive. */ 4251 BGE_SETBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP); 4252 4253 #ifdef DEVICE_POLLING 4254 /* Disable interrupts if we are polling. */ 4255 if (ifp->if_capenable & IFCAP_POLLING) { 4256 BGE_SETBIT(sc, BGE_PCI_MISC_CTL, 4257 BGE_PCIMISCCTL_MASK_PCI_INTR); 4258 bge_writembx(sc, BGE_MBX_IRQ0_LO, 1); 4259 } else 4260 #endif 4261 4262 /* Enable host interrupts. */ 4263 { 4264 BGE_SETBIT(sc, BGE_PCI_MISC_CTL, BGE_PCIMISCCTL_CLEAR_INTA); 4265 BGE_CLRBIT(sc, BGE_PCI_MISC_CTL, BGE_PCIMISCCTL_MASK_PCI_INTR); 4266 bge_writembx(sc, BGE_MBX_IRQ0_LO, 0); 4267 } 4268 4269 bge_ifmedia_upd_locked(ifp); 4270 4271 ifp->if_drv_flags |= IFF_DRV_RUNNING; 4272 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 4273 4274 callout_reset(&sc->bge_stat_ch, hz, bge_tick, sc); 4275 } 4276 4277 static void 4278 bge_init(void *xsc) 4279 { 4280 struct bge_softc *sc = xsc; 4281 4282 BGE_LOCK(sc); 4283 bge_init_locked(sc); 4284 BGE_UNLOCK(sc); 4285 } 4286 4287 /* 4288 * Set media options. 4289 */ 4290 static int 4291 bge_ifmedia_upd(struct ifnet *ifp) 4292 { 4293 struct bge_softc *sc = ifp->if_softc; 4294 int res; 4295 4296 BGE_LOCK(sc); 4297 res = bge_ifmedia_upd_locked(ifp); 4298 BGE_UNLOCK(sc); 4299 4300 return (res); 4301 } 4302 4303 static int 4304 bge_ifmedia_upd_locked(struct ifnet *ifp) 4305 { 4306 struct bge_softc *sc = ifp->if_softc; 4307 struct mii_data *mii; 4308 struct mii_softc *miisc; 4309 struct ifmedia *ifm; 4310 4311 BGE_LOCK_ASSERT(sc); 4312 4313 ifm = &sc->bge_ifmedia; 4314 4315 /* If this is a 1000baseX NIC, enable the TBI port. */ 4316 if (sc->bge_flags & BGE_FLAG_TBI) { 4317 if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER) 4318 return (EINVAL); 4319 switch(IFM_SUBTYPE(ifm->ifm_media)) { 4320 case IFM_AUTO: 4321 /* 4322 * The BCM5704 ASIC appears to have a special 4323 * mechanism for programming the autoneg 4324 * advertisement registers in TBI mode. 4325 */ 4326 if (sc->bge_asicrev == BGE_ASICREV_BCM5704) { 4327 uint32_t sgdig; 4328 sgdig = CSR_READ_4(sc, BGE_SGDIG_STS); 4329 if (sgdig & BGE_SGDIGSTS_DONE) { 4330 CSR_WRITE_4(sc, BGE_TX_TBI_AUTONEG, 0); 4331 sgdig = CSR_READ_4(sc, BGE_SGDIG_CFG); 4332 sgdig |= BGE_SGDIGCFG_AUTO | 4333 BGE_SGDIGCFG_PAUSE_CAP | 4334 BGE_SGDIGCFG_ASYM_PAUSE; 4335 CSR_WRITE_4(sc, BGE_SGDIG_CFG, 4336 sgdig | BGE_SGDIGCFG_SEND); 4337 DELAY(5); 4338 CSR_WRITE_4(sc, BGE_SGDIG_CFG, sgdig); 4339 } 4340 } 4341 break; 4342 case IFM_1000_SX: 4343 if ((ifm->ifm_media & IFM_GMASK) == IFM_FDX) { 4344 BGE_CLRBIT(sc, BGE_MAC_MODE, 4345 BGE_MACMODE_HALF_DUPLEX); 4346 } else { 4347 BGE_SETBIT(sc, BGE_MAC_MODE, 4348 BGE_MACMODE_HALF_DUPLEX); 4349 } 4350 break; 4351 default: 4352 return (EINVAL); 4353 } 4354 return (0); 4355 } 4356 4357 sc->bge_link_evt++; 4358 mii = device_get_softc(sc->bge_miibus); 4359 if (mii->mii_instance) 4360 LIST_FOREACH(miisc, &mii->mii_phys, mii_list) 4361 mii_phy_reset(miisc); 4362 mii_mediachg(mii); 4363 4364 /* 4365 * Force an interrupt so that we will call bge_link_upd 4366 * if needed and clear any pending link state attention. 4367 * Without this we are not getting any further interrupts 4368 * for link state changes and thus will not UP the link and 4369 * not be able to send in bge_start_locked. The only 4370 * way to get things working was to receive a packet and 4371 * get an RX intr. 4372 * bge_tick should help for fiber cards and we might not 4373 * need to do this here if BGE_FLAG_TBI is set but as 4374 * we poll for fiber anyway it should not harm. 4375 */ 4376 if (sc->bge_asicrev == BGE_ASICREV_BCM5700 || 4377 sc->bge_flags & BGE_FLAG_5788) 4378 BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_INTR_SET); 4379 else 4380 BGE_SETBIT(sc, BGE_HCC_MODE, BGE_HCCMODE_COAL_NOW); 4381 4382 return (0); 4383 } 4384 4385 /* 4386 * Report current media status. 4387 */ 4388 static void 4389 bge_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr) 4390 { 4391 struct bge_softc *sc = ifp->if_softc; 4392 struct mii_data *mii; 4393 4394 BGE_LOCK(sc); 4395 4396 if (sc->bge_flags & BGE_FLAG_TBI) { 4397 ifmr->ifm_status = IFM_AVALID; 4398 ifmr->ifm_active = IFM_ETHER; 4399 if (CSR_READ_4(sc, BGE_MAC_STS) & 4400 BGE_MACSTAT_TBI_PCS_SYNCHED) 4401 ifmr->ifm_status |= IFM_ACTIVE; 4402 else { 4403 ifmr->ifm_active |= IFM_NONE; 4404 BGE_UNLOCK(sc); 4405 return; 4406 } 4407 ifmr->ifm_active |= IFM_1000_SX; 4408 if (CSR_READ_4(sc, BGE_MAC_MODE) & BGE_MACMODE_HALF_DUPLEX) 4409 ifmr->ifm_active |= IFM_HDX; 4410 else 4411 ifmr->ifm_active |= IFM_FDX; 4412 BGE_UNLOCK(sc); 4413 return; 4414 } 4415 4416 mii = device_get_softc(sc->bge_miibus); 4417 mii_pollstat(mii); 4418 ifmr->ifm_active = mii->mii_media_active; 4419 ifmr->ifm_status = mii->mii_media_status; 4420 4421 BGE_UNLOCK(sc); 4422 } 4423 4424 static int 4425 bge_ioctl(struct ifnet *ifp, u_long command, caddr_t data) 4426 { 4427 struct bge_softc *sc = ifp->if_softc; 4428 struct ifreq *ifr = (struct ifreq *) data; 4429 struct mii_data *mii; 4430 int flags, mask, error = 0; 4431 4432 switch (command) { 4433 case SIOCSIFMTU: 4434 if (ifr->ifr_mtu < ETHERMIN || 4435 ((BGE_IS_JUMBO_CAPABLE(sc)) && 4436 ifr->ifr_mtu > BGE_JUMBO_MTU) || 4437 ((!BGE_IS_JUMBO_CAPABLE(sc)) && 4438 ifr->ifr_mtu > ETHERMTU)) 4439 error = EINVAL; 4440 else if (ifp->if_mtu != ifr->ifr_mtu) { 4441 ifp->if_mtu = ifr->ifr_mtu; 4442 ifp->if_drv_flags &= ~IFF_DRV_RUNNING; 4443 bge_init(sc); 4444 } 4445 break; 4446 case SIOCSIFFLAGS: 4447 BGE_LOCK(sc); 4448 if (ifp->if_flags & IFF_UP) { 4449 /* 4450 * If only the state of the PROMISC flag changed, 4451 * then just use the 'set promisc mode' command 4452 * instead of reinitializing the entire NIC. Doing 4453 * a full re-init means reloading the firmware and 4454 * waiting for it to start up, which may take a 4455 * second or two. Similarly for ALLMULTI. 4456 */ 4457 if (ifp->if_drv_flags & IFF_DRV_RUNNING) { 4458 flags = ifp->if_flags ^ sc->bge_if_flags; 4459 if (flags & IFF_PROMISC) 4460 bge_setpromisc(sc); 4461 if (flags & IFF_ALLMULTI) 4462 bge_setmulti(sc); 4463 } else 4464 bge_init_locked(sc); 4465 } else { 4466 if (ifp->if_drv_flags & IFF_DRV_RUNNING) { 4467 bge_stop(sc); 4468 } 4469 } 4470 sc->bge_if_flags = ifp->if_flags; 4471 BGE_UNLOCK(sc); 4472 error = 0; 4473 break; 4474 case SIOCADDMULTI: 4475 case SIOCDELMULTI: 4476 if (ifp->if_drv_flags & IFF_DRV_RUNNING) { 4477 BGE_LOCK(sc); 4478 bge_setmulti(sc); 4479 BGE_UNLOCK(sc); 4480 error = 0; 4481 } 4482 break; 4483 case SIOCSIFMEDIA: 4484 case SIOCGIFMEDIA: 4485 if (sc->bge_flags & BGE_FLAG_TBI) { 4486 error = ifmedia_ioctl(ifp, ifr, 4487 &sc->bge_ifmedia, command); 4488 } else { 4489 mii = device_get_softc(sc->bge_miibus); 4490 error = ifmedia_ioctl(ifp, ifr, 4491 &mii->mii_media, command); 4492 } 4493 break; 4494 case SIOCSIFCAP: 4495 mask = ifr->ifr_reqcap ^ ifp->if_capenable; 4496 #ifdef DEVICE_POLLING 4497 if (mask & IFCAP_POLLING) { 4498 if (ifr->ifr_reqcap & IFCAP_POLLING) { 4499 error = ether_poll_register(bge_poll, ifp); 4500 if (error) 4501 return (error); 4502 BGE_LOCK(sc); 4503 BGE_SETBIT(sc, BGE_PCI_MISC_CTL, 4504 BGE_PCIMISCCTL_MASK_PCI_INTR); 4505 bge_writembx(sc, BGE_MBX_IRQ0_LO, 1); 4506 ifp->if_capenable |= IFCAP_POLLING; 4507 BGE_UNLOCK(sc); 4508 } else { 4509 error = ether_poll_deregister(ifp); 4510 /* Enable interrupt even in error case */ 4511 BGE_LOCK(sc); 4512 BGE_CLRBIT(sc, BGE_PCI_MISC_CTL, 4513 BGE_PCIMISCCTL_MASK_PCI_INTR); 4514 bge_writembx(sc, BGE_MBX_IRQ0_LO, 0); 4515 ifp->if_capenable &= ~IFCAP_POLLING; 4516 BGE_UNLOCK(sc); 4517 } 4518 } 4519 #endif 4520 if (mask & IFCAP_HWCSUM) { 4521 ifp->if_capenable ^= IFCAP_HWCSUM; 4522 if (IFCAP_HWCSUM & ifp->if_capenable && 4523 IFCAP_HWCSUM & ifp->if_capabilities) 4524 ifp->if_hwassist |= BGE_CSUM_FEATURES; 4525 else 4526 ifp->if_hwassist &= ~BGE_CSUM_FEATURES; 4527 #ifdef VLAN_CAPABILITIES 4528 VLAN_CAPABILITIES(ifp); 4529 #endif 4530 } 4531 4532 if ((mask & IFCAP_TSO4) != 0 && 4533 (ifp->if_capabilities & IFCAP_TSO4) != 0) { 4534 ifp->if_capenable ^= IFCAP_TSO4; 4535 if ((ifp->if_capenable & IFCAP_TSO4) != 0) 4536 ifp->if_hwassist |= CSUM_TSO; 4537 else 4538 ifp->if_hwassist &= ~CSUM_TSO; 4539 } 4540 4541 if (mask & IFCAP_VLAN_MTU) { 4542 ifp->if_capenable ^= IFCAP_VLAN_MTU; 4543 ifp->if_drv_flags &= ~IFF_DRV_RUNNING; 4544 bge_init(sc); 4545 } 4546 4547 if (mask & IFCAP_VLAN_HWTAGGING) { 4548 ifp->if_capenable ^= IFCAP_VLAN_HWTAGGING; 4549 BGE_LOCK(sc); 4550 bge_setvlan(sc); 4551 BGE_UNLOCK(sc); 4552 #ifdef VLAN_CAPABILITIES 4553 VLAN_CAPABILITIES(ifp); 4554 #endif 4555 } 4556 4557 break; 4558 default: 4559 error = ether_ioctl(ifp, command, data); 4560 break; 4561 } 4562 4563 return (error); 4564 } 4565 4566 static void 4567 bge_watchdog(struct bge_softc *sc) 4568 { 4569 struct ifnet *ifp; 4570 4571 BGE_LOCK_ASSERT(sc); 4572 4573 if (sc->bge_timer == 0 || --sc->bge_timer) 4574 return; 4575 4576 ifp = sc->bge_ifp; 4577 4578 if_printf(ifp, "watchdog timeout -- resetting\n"); 4579 4580 ifp->if_drv_flags &= ~IFF_DRV_RUNNING; 4581 bge_init_locked(sc); 4582 4583 ifp->if_oerrors++; 4584 } 4585 4586 /* 4587 * Stop the adapter and free any mbufs allocated to the 4588 * RX and TX lists. 4589 */ 4590 static void 4591 bge_stop(struct bge_softc *sc) 4592 { 4593 struct ifnet *ifp; 4594 4595 BGE_LOCK_ASSERT(sc); 4596 4597 ifp = sc->bge_ifp; 4598 4599 callout_stop(&sc->bge_stat_ch); 4600 4601 /* Disable host interrupts. */ 4602 BGE_SETBIT(sc, BGE_PCI_MISC_CTL, BGE_PCIMISCCTL_MASK_PCI_INTR); 4603 bge_writembx(sc, BGE_MBX_IRQ0_LO, 1); 4604 4605 /* 4606 * Tell firmware we're shutting down. 4607 */ 4608 bge_stop_fw(sc); 4609 bge_sig_pre_reset(sc, BGE_RESET_STOP); 4610 4611 /* 4612 * Disable all of the receiver blocks. 4613 */ 4614 BGE_CLRBIT(sc, BGE_RX_MODE, BGE_RXMODE_ENABLE); 4615 BGE_CLRBIT(sc, BGE_RBDI_MODE, BGE_RBDIMODE_ENABLE); 4616 BGE_CLRBIT(sc, BGE_RXLP_MODE, BGE_RXLPMODE_ENABLE); 4617 if (!(BGE_IS_5705_PLUS(sc))) 4618 BGE_CLRBIT(sc, BGE_RXLS_MODE, BGE_RXLSMODE_ENABLE); 4619 BGE_CLRBIT(sc, BGE_RDBDI_MODE, BGE_RBDIMODE_ENABLE); 4620 BGE_CLRBIT(sc, BGE_RDC_MODE, BGE_RDCMODE_ENABLE); 4621 BGE_CLRBIT(sc, BGE_RBDC_MODE, BGE_RBDCMODE_ENABLE); 4622 4623 /* 4624 * Disable all of the transmit blocks. 4625 */ 4626 BGE_CLRBIT(sc, BGE_SRS_MODE, BGE_SRSMODE_ENABLE); 4627 BGE_CLRBIT(sc, BGE_SBDI_MODE, BGE_SBDIMODE_ENABLE); 4628 BGE_CLRBIT(sc, BGE_SDI_MODE, BGE_SDIMODE_ENABLE); 4629 BGE_CLRBIT(sc, BGE_RDMA_MODE, BGE_RDMAMODE_ENABLE); 4630 BGE_CLRBIT(sc, BGE_SDC_MODE, BGE_SDCMODE_ENABLE); 4631 if (!(BGE_IS_5705_PLUS(sc))) 4632 BGE_CLRBIT(sc, BGE_DMAC_MODE, BGE_DMACMODE_ENABLE); 4633 BGE_CLRBIT(sc, BGE_SBDC_MODE, BGE_SBDCMODE_ENABLE); 4634 4635 /* 4636 * Shut down all of the memory managers and related 4637 * state machines. 4638 */ 4639 BGE_CLRBIT(sc, BGE_HCC_MODE, BGE_HCCMODE_ENABLE); 4640 BGE_CLRBIT(sc, BGE_WDMA_MODE, BGE_WDMAMODE_ENABLE); 4641 if (!(BGE_IS_5705_PLUS(sc))) 4642 BGE_CLRBIT(sc, BGE_MBCF_MODE, BGE_MBCFMODE_ENABLE); 4643 CSR_WRITE_4(sc, BGE_FTQ_RESET, 0xFFFFFFFF); 4644 CSR_WRITE_4(sc, BGE_FTQ_RESET, 0); 4645 if (!(BGE_IS_5705_PLUS(sc))) { 4646 BGE_CLRBIT(sc, BGE_BMAN_MODE, BGE_BMANMODE_ENABLE); 4647 BGE_CLRBIT(sc, BGE_MARB_MODE, BGE_MARBMODE_ENABLE); 4648 } 4649 4650 bge_reset(sc); 4651 bge_sig_legacy(sc, BGE_RESET_STOP); 4652 bge_sig_post_reset(sc, BGE_RESET_STOP); 4653 4654 /* 4655 * Keep the ASF firmware running if up. 4656 */ 4657 if (sc->bge_asf_mode & ASF_STACKUP) 4658 BGE_SETBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP); 4659 else 4660 BGE_CLRBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP); 4661 4662 /* Free the RX lists. */ 4663 bge_free_rx_ring_std(sc); 4664 4665 /* Free jumbo RX list. */ 4666 if (BGE_IS_JUMBO_CAPABLE(sc)) 4667 bge_free_rx_ring_jumbo(sc); 4668 4669 /* Free TX buffers. */ 4670 bge_free_tx_ring(sc); 4671 4672 sc->bge_tx_saved_considx = BGE_TXCONS_UNSET; 4673 4674 /* Clear MAC's link state (PHY may still have link UP). */ 4675 if (bootverbose && sc->bge_link) 4676 if_printf(sc->bge_ifp, "link DOWN\n"); 4677 sc->bge_link = 0; 4678 4679 ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE); 4680 } 4681 4682 /* 4683 * Stop all chip I/O so that the kernel's probe routines don't 4684 * get confused by errant DMAs when rebooting. 4685 */ 4686 static int 4687 bge_shutdown(device_t dev) 4688 { 4689 struct bge_softc *sc; 4690 4691 sc = device_get_softc(dev); 4692 BGE_LOCK(sc); 4693 bge_stop(sc); 4694 bge_reset(sc); 4695 BGE_UNLOCK(sc); 4696 4697 return (0); 4698 } 4699 4700 static int 4701 bge_suspend(device_t dev) 4702 { 4703 struct bge_softc *sc; 4704 4705 sc = device_get_softc(dev); 4706 BGE_LOCK(sc); 4707 bge_stop(sc); 4708 BGE_UNLOCK(sc); 4709 4710 return (0); 4711 } 4712 4713 static int 4714 bge_resume(device_t dev) 4715 { 4716 struct bge_softc *sc; 4717 struct ifnet *ifp; 4718 4719 sc = device_get_softc(dev); 4720 BGE_LOCK(sc); 4721 ifp = sc->bge_ifp; 4722 if (ifp->if_flags & IFF_UP) { 4723 bge_init_locked(sc); 4724 if (ifp->if_drv_flags & IFF_DRV_RUNNING) 4725 bge_start_locked(ifp); 4726 } 4727 BGE_UNLOCK(sc); 4728 4729 return (0); 4730 } 4731 4732 static void 4733 bge_link_upd(struct bge_softc *sc) 4734 { 4735 struct mii_data *mii; 4736 uint32_t link, status; 4737 4738 BGE_LOCK_ASSERT(sc); 4739 4740 /* Clear 'pending link event' flag. */ 4741 sc->bge_link_evt = 0; 4742 4743 /* 4744 * Process link state changes. 4745 * Grrr. The link status word in the status block does 4746 * not work correctly on the BCM5700 rev AX and BX chips, 4747 * according to all available information. Hence, we have 4748 * to enable MII interrupts in order to properly obtain 4749 * async link changes. Unfortunately, this also means that 4750 * we have to read the MAC status register to detect link 4751 * changes, thereby adding an additional register access to 4752 * the interrupt handler. 4753 * 4754 * XXX: perhaps link state detection procedure used for 4755 * BGE_CHIPID_BCM5700_B2 can be used for others BCM5700 revisions. 4756 */ 4757 4758 if (sc->bge_asicrev == BGE_ASICREV_BCM5700 && 4759 sc->bge_chipid != BGE_CHIPID_BCM5700_B2) { 4760 status = CSR_READ_4(sc, BGE_MAC_STS); 4761 if (status & BGE_MACSTAT_MI_INTERRUPT) { 4762 mii = device_get_softc(sc->bge_miibus); 4763 mii_pollstat(mii); 4764 if (!sc->bge_link && 4765 mii->mii_media_status & IFM_ACTIVE && 4766 IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) { 4767 sc->bge_link++; 4768 if (bootverbose) 4769 if_printf(sc->bge_ifp, "link UP\n"); 4770 } else if (sc->bge_link && 4771 (!(mii->mii_media_status & IFM_ACTIVE) || 4772 IFM_SUBTYPE(mii->mii_media_active) == IFM_NONE)) { 4773 sc->bge_link = 0; 4774 if (bootverbose) 4775 if_printf(sc->bge_ifp, "link DOWN\n"); 4776 } 4777 4778 /* Clear the interrupt. */ 4779 CSR_WRITE_4(sc, BGE_MAC_EVT_ENB, 4780 BGE_EVTENB_MI_INTERRUPT); 4781 bge_miibus_readreg(sc->bge_dev, 1, BRGPHY_MII_ISR); 4782 bge_miibus_writereg(sc->bge_dev, 1, BRGPHY_MII_IMR, 4783 BRGPHY_INTRS); 4784 } 4785 return; 4786 } 4787 4788 if (sc->bge_flags & BGE_FLAG_TBI) { 4789 status = CSR_READ_4(sc, BGE_MAC_STS); 4790 if (status & BGE_MACSTAT_TBI_PCS_SYNCHED) { 4791 if (!sc->bge_link) { 4792 sc->bge_link++; 4793 if (sc->bge_asicrev == BGE_ASICREV_BCM5704) 4794 BGE_CLRBIT(sc, BGE_MAC_MODE, 4795 BGE_MACMODE_TBI_SEND_CFGS); 4796 CSR_WRITE_4(sc, BGE_MAC_STS, 0xFFFFFFFF); 4797 if (bootverbose) 4798 if_printf(sc->bge_ifp, "link UP\n"); 4799 if_link_state_change(sc->bge_ifp, 4800 LINK_STATE_UP); 4801 } 4802 } else if (sc->bge_link) { 4803 sc->bge_link = 0; 4804 if (bootverbose) 4805 if_printf(sc->bge_ifp, "link DOWN\n"); 4806 if_link_state_change(sc->bge_ifp, LINK_STATE_DOWN); 4807 } 4808 } else if (CSR_READ_4(sc, BGE_MI_MODE) & BGE_MIMODE_AUTOPOLL) { 4809 /* 4810 * Some broken BCM chips have BGE_STATFLAG_LINKSTATE_CHANGED bit 4811 * in status word always set. Workaround this bug by reading 4812 * PHY link status directly. 4813 */ 4814 link = (CSR_READ_4(sc, BGE_MI_STS) & BGE_MISTS_LINK) ? 1 : 0; 4815 4816 if (link != sc->bge_link || 4817 sc->bge_asicrev == BGE_ASICREV_BCM5700) { 4818 mii = device_get_softc(sc->bge_miibus); 4819 mii_pollstat(mii); 4820 if (!sc->bge_link && 4821 mii->mii_media_status & IFM_ACTIVE && 4822 IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) { 4823 sc->bge_link++; 4824 if (bootverbose) 4825 if_printf(sc->bge_ifp, "link UP\n"); 4826 } else if (sc->bge_link && 4827 (!(mii->mii_media_status & IFM_ACTIVE) || 4828 IFM_SUBTYPE(mii->mii_media_active) == IFM_NONE)) { 4829 sc->bge_link = 0; 4830 if (bootverbose) 4831 if_printf(sc->bge_ifp, "link DOWN\n"); 4832 } 4833 } 4834 } else { 4835 /* 4836 * Discard link events for MII/GMII controllers 4837 * if MI auto-polling is disabled. 4838 */ 4839 } 4840 4841 /* Clear the attention. */ 4842 CSR_WRITE_4(sc, BGE_MAC_STS, BGE_MACSTAT_SYNC_CHANGED | 4843 BGE_MACSTAT_CFG_CHANGED | BGE_MACSTAT_MI_COMPLETE | 4844 BGE_MACSTAT_LINK_CHANGED); 4845 } 4846 4847 #define BGE_SYSCTL_STAT(sc, ctx, desc, parent, node, oid) \ 4848 SYSCTL_ADD_PROC(ctx, parent, OID_AUTO, oid, CTLTYPE_UINT|CTLFLAG_RD, \ 4849 sc, offsetof(struct bge_stats, node), bge_sysctl_stats, "IU", \ 4850 desc) 4851 4852 static void 4853 bge_add_sysctls(struct bge_softc *sc) 4854 { 4855 struct sysctl_ctx_list *ctx; 4856 struct sysctl_oid_list *children, *schildren; 4857 struct sysctl_oid *tree; 4858 4859 ctx = device_get_sysctl_ctx(sc->bge_dev); 4860 children = SYSCTL_CHILDREN(device_get_sysctl_tree(sc->bge_dev)); 4861 4862 #ifdef BGE_REGISTER_DEBUG 4863 SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "debug_info", 4864 CTLTYPE_INT | CTLFLAG_RW, sc, 0, bge_sysctl_debug_info, "I", 4865 "Debug Information"); 4866 4867 SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "reg_read", 4868 CTLTYPE_INT | CTLFLAG_RW, sc, 0, bge_sysctl_reg_read, "I", 4869 "Register Read"); 4870 4871 SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "mem_read", 4872 CTLTYPE_INT | CTLFLAG_RW, sc, 0, bge_sysctl_mem_read, "I", 4873 "Memory Read"); 4874 4875 #endif 4876 4877 /* 4878 * A common design characteristic for many Broadcom client controllers 4879 * is that they only support a single outstanding DMA read operation 4880 * on the PCIe bus. This means that it will take twice as long to fetch 4881 * a TX frame that is split into header and payload buffers as it does 4882 * to fetch a single, contiguous TX frame (2 reads vs. 1 read). For 4883 * these controllers, coalescing buffers to reduce the number of memory 4884 * reads is effective way to get maximum performance(about 940Mbps). 4885 * Without collapsing TX buffers the maximum TCP bulk transfer 4886 * performance is about 850Mbps. However forcing coalescing mbufs 4887 * consumes a lot of CPU cycles, so leave it off by default. 4888 */ 4889 SYSCTL_ADD_INT(ctx, children, OID_AUTO, "forced_collapse", 4890 CTLFLAG_RW, &sc->bge_forced_collapse, 0, 4891 "Number of fragmented TX buffers of a frame allowed before " 4892 "forced collapsing"); 4893 resource_int_value(device_get_name(sc->bge_dev), 4894 device_get_unit(sc->bge_dev), "forced_collapse", 4895 &sc->bge_forced_collapse); 4896 4897 if (BGE_IS_5705_PLUS(sc)) 4898 return; 4899 4900 tree = SYSCTL_ADD_NODE(ctx, children, OID_AUTO, "stats", CTLFLAG_RD, 4901 NULL, "BGE Statistics"); 4902 schildren = children = SYSCTL_CHILDREN(tree); 4903 BGE_SYSCTL_STAT(sc, ctx, "Frames Dropped Due To Filters", 4904 children, COSFramesDroppedDueToFilters, 4905 "FramesDroppedDueToFilters"); 4906 BGE_SYSCTL_STAT(sc, ctx, "NIC DMA Write Queue Full", 4907 children, nicDmaWriteQueueFull, "DmaWriteQueueFull"); 4908 BGE_SYSCTL_STAT(sc, ctx, "NIC DMA Write High Priority Queue Full", 4909 children, nicDmaWriteHighPriQueueFull, "DmaWriteHighPriQueueFull"); 4910 BGE_SYSCTL_STAT(sc, ctx, "NIC No More RX Buffer Descriptors", 4911 children, nicNoMoreRxBDs, "NoMoreRxBDs"); 4912 BGE_SYSCTL_STAT(sc, ctx, "Discarded Input Frames", 4913 children, ifInDiscards, "InputDiscards"); 4914 BGE_SYSCTL_STAT(sc, ctx, "Input Errors", 4915 children, ifInErrors, "InputErrors"); 4916 BGE_SYSCTL_STAT(sc, ctx, "NIC Recv Threshold Hit", 4917 children, nicRecvThresholdHit, "RecvThresholdHit"); 4918 BGE_SYSCTL_STAT(sc, ctx, "NIC DMA Read Queue Full", 4919 children, nicDmaReadQueueFull, "DmaReadQueueFull"); 4920 BGE_SYSCTL_STAT(sc, ctx, "NIC DMA Read High Priority Queue Full", 4921 children, nicDmaReadHighPriQueueFull, "DmaReadHighPriQueueFull"); 4922 BGE_SYSCTL_STAT(sc, ctx, "NIC Send Data Complete Queue Full", 4923 children, nicSendDataCompQueueFull, "SendDataCompQueueFull"); 4924 BGE_SYSCTL_STAT(sc, ctx, "NIC Ring Set Send Producer Index", 4925 children, nicRingSetSendProdIndex, "RingSetSendProdIndex"); 4926 BGE_SYSCTL_STAT(sc, ctx, "NIC Ring Status Update", 4927 children, nicRingStatusUpdate, "RingStatusUpdate"); 4928 BGE_SYSCTL_STAT(sc, ctx, "NIC Interrupts", 4929 children, nicInterrupts, "Interrupts"); 4930 BGE_SYSCTL_STAT(sc, ctx, "NIC Avoided Interrupts", 4931 children, nicAvoidedInterrupts, "AvoidedInterrupts"); 4932 BGE_SYSCTL_STAT(sc, ctx, "NIC Send Threshold Hit", 4933 children, nicSendThresholdHit, "SendThresholdHit"); 4934 4935 tree = SYSCTL_ADD_NODE(ctx, schildren, OID_AUTO, "rx", CTLFLAG_RD, 4936 NULL, "BGE RX Statistics"); 4937 children = SYSCTL_CHILDREN(tree); 4938 BGE_SYSCTL_STAT(sc, ctx, "Inbound Octets", 4939 children, rxstats.ifHCInOctets, "Octets"); 4940 BGE_SYSCTL_STAT(sc, ctx, "Fragments", 4941 children, rxstats.etherStatsFragments, "Fragments"); 4942 BGE_SYSCTL_STAT(sc, ctx, "Inbound Unicast Packets", 4943 children, rxstats.ifHCInUcastPkts, "UcastPkts"); 4944 BGE_SYSCTL_STAT(sc, ctx, "Inbound Multicast Packets", 4945 children, rxstats.ifHCInMulticastPkts, "MulticastPkts"); 4946 BGE_SYSCTL_STAT(sc, ctx, "FCS Errors", 4947 children, rxstats.dot3StatsFCSErrors, "FCSErrors"); 4948 BGE_SYSCTL_STAT(sc, ctx, "Alignment Errors", 4949 children, rxstats.dot3StatsAlignmentErrors, "AlignmentErrors"); 4950 BGE_SYSCTL_STAT(sc, ctx, "XON Pause Frames Received", 4951 children, rxstats.xonPauseFramesReceived, "xonPauseFramesReceived"); 4952 BGE_SYSCTL_STAT(sc, ctx, "XOFF Pause Frames Received", 4953 children, rxstats.xoffPauseFramesReceived, 4954 "xoffPauseFramesReceived"); 4955 BGE_SYSCTL_STAT(sc, ctx, "MAC Control Frames Received", 4956 children, rxstats.macControlFramesReceived, 4957 "ControlFramesReceived"); 4958 BGE_SYSCTL_STAT(sc, ctx, "XOFF State Entered", 4959 children, rxstats.xoffStateEntered, "xoffStateEntered"); 4960 BGE_SYSCTL_STAT(sc, ctx, "Frames Too Long", 4961 children, rxstats.dot3StatsFramesTooLong, "FramesTooLong"); 4962 BGE_SYSCTL_STAT(sc, ctx, "Jabbers", 4963 children, rxstats.etherStatsJabbers, "Jabbers"); 4964 BGE_SYSCTL_STAT(sc, ctx, "Undersized Packets", 4965 children, rxstats.etherStatsUndersizePkts, "UndersizePkts"); 4966 BGE_SYSCTL_STAT(sc, ctx, "Inbound Range Length Errors", 4967 children, rxstats.inRangeLengthError, "inRangeLengthError"); 4968 BGE_SYSCTL_STAT(sc, ctx, "Outbound Range Length Errors", 4969 children, rxstats.outRangeLengthError, "outRangeLengthError"); 4970 4971 tree = SYSCTL_ADD_NODE(ctx, schildren, OID_AUTO, "tx", CTLFLAG_RD, 4972 NULL, "BGE TX Statistics"); 4973 children = SYSCTL_CHILDREN(tree); 4974 BGE_SYSCTL_STAT(sc, ctx, "Outbound Octets", 4975 children, txstats.ifHCOutOctets, "Octets"); 4976 BGE_SYSCTL_STAT(sc, ctx, "TX Collisions", 4977 children, txstats.etherStatsCollisions, "Collisions"); 4978 BGE_SYSCTL_STAT(sc, ctx, "XON Sent", 4979 children, txstats.outXonSent, "XonSent"); 4980 BGE_SYSCTL_STAT(sc, ctx, "XOFF Sent", 4981 children, txstats.outXoffSent, "XoffSent"); 4982 BGE_SYSCTL_STAT(sc, ctx, "Flow Control Done", 4983 children, txstats.flowControlDone, "flowControlDone"); 4984 BGE_SYSCTL_STAT(sc, ctx, "Internal MAC TX errors", 4985 children, txstats.dot3StatsInternalMacTransmitErrors, 4986 "InternalMacTransmitErrors"); 4987 BGE_SYSCTL_STAT(sc, ctx, "Single Collision Frames", 4988 children, txstats.dot3StatsSingleCollisionFrames, 4989 "SingleCollisionFrames"); 4990 BGE_SYSCTL_STAT(sc, ctx, "Multiple Collision Frames", 4991 children, txstats.dot3StatsMultipleCollisionFrames, 4992 "MultipleCollisionFrames"); 4993 BGE_SYSCTL_STAT(sc, ctx, "Deferred Transmissions", 4994 children, txstats.dot3StatsDeferredTransmissions, 4995 "DeferredTransmissions"); 4996 BGE_SYSCTL_STAT(sc, ctx, "Excessive Collisions", 4997 children, txstats.dot3StatsExcessiveCollisions, 4998 "ExcessiveCollisions"); 4999 BGE_SYSCTL_STAT(sc, ctx, "Late Collisions", 5000 children, txstats.dot3StatsLateCollisions, 5001 "LateCollisions"); 5002 BGE_SYSCTL_STAT(sc, ctx, "Outbound Unicast Packets", 5003 children, txstats.ifHCOutUcastPkts, "UcastPkts"); 5004 BGE_SYSCTL_STAT(sc, ctx, "Outbound Multicast Packets", 5005 children, txstats.ifHCOutMulticastPkts, "MulticastPkts"); 5006 BGE_SYSCTL_STAT(sc, ctx, "Outbound Broadcast Packets", 5007 children, txstats.ifHCOutBroadcastPkts, "BroadcastPkts"); 5008 BGE_SYSCTL_STAT(sc, ctx, "Carrier Sense Errors", 5009 children, txstats.dot3StatsCarrierSenseErrors, 5010 "CarrierSenseErrors"); 5011 BGE_SYSCTL_STAT(sc, ctx, "Outbound Discards", 5012 children, txstats.ifOutDiscards, "Discards"); 5013 BGE_SYSCTL_STAT(sc, ctx, "Outbound Errors", 5014 children, txstats.ifOutErrors, "Errors"); 5015 } 5016 5017 static int 5018 bge_sysctl_stats(SYSCTL_HANDLER_ARGS) 5019 { 5020 struct bge_softc *sc; 5021 uint32_t result; 5022 int offset; 5023 5024 sc = (struct bge_softc *)arg1; 5025 offset = arg2; 5026 result = CSR_READ_4(sc, BGE_MEMWIN_START + BGE_STATS_BLOCK + offset + 5027 offsetof(bge_hostaddr, bge_addr_lo)); 5028 return (sysctl_handle_int(oidp, &result, 0, req)); 5029 } 5030 5031 #ifdef BGE_REGISTER_DEBUG 5032 static int 5033 bge_sysctl_debug_info(SYSCTL_HANDLER_ARGS) 5034 { 5035 struct bge_softc *sc; 5036 uint16_t *sbdata; 5037 int error; 5038 int result; 5039 int i, j; 5040 5041 result = -1; 5042 error = sysctl_handle_int(oidp, &result, 0, req); 5043 if (error || (req->newptr == NULL)) 5044 return (error); 5045 5046 if (result == 1) { 5047 sc = (struct bge_softc *)arg1; 5048 5049 sbdata = (uint16_t *)sc->bge_ldata.bge_status_block; 5050 printf("Status Block:\n"); 5051 for (i = 0x0; i < (BGE_STATUS_BLK_SZ / 4); ) { 5052 printf("%06x:", i); 5053 for (j = 0; j < 8; j++) { 5054 printf(" %04x", sbdata[i]); 5055 i += 4; 5056 } 5057 printf("\n"); 5058 } 5059 5060 printf("Registers:\n"); 5061 for (i = 0x800; i < 0xA00; ) { 5062 printf("%06x:", i); 5063 for (j = 0; j < 8; j++) { 5064 printf(" %08x", CSR_READ_4(sc, i)); 5065 i += 4; 5066 } 5067 printf("\n"); 5068 } 5069 5070 printf("Hardware Flags:\n"); 5071 if (BGE_IS_5755_PLUS(sc)) 5072 printf(" - 5755 Plus\n"); 5073 if (BGE_IS_575X_PLUS(sc)) 5074 printf(" - 575X Plus\n"); 5075 if (BGE_IS_5705_PLUS(sc)) 5076 printf(" - 5705 Plus\n"); 5077 if (BGE_IS_5714_FAMILY(sc)) 5078 printf(" - 5714 Family\n"); 5079 if (BGE_IS_5700_FAMILY(sc)) 5080 printf(" - 5700 Family\n"); 5081 if (sc->bge_flags & BGE_FLAG_JUMBO) 5082 printf(" - Supports Jumbo Frames\n"); 5083 if (sc->bge_flags & BGE_FLAG_PCIX) 5084 printf(" - PCI-X Bus\n"); 5085 if (sc->bge_flags & BGE_FLAG_PCIE) 5086 printf(" - PCI Express Bus\n"); 5087 if (sc->bge_flags & BGE_FLAG_NO_3LED) 5088 printf(" - No 3 LEDs\n"); 5089 if (sc->bge_flags & BGE_FLAG_RX_ALIGNBUG) 5090 printf(" - RX Alignment Bug\n"); 5091 } 5092 5093 return (error); 5094 } 5095 5096 static int 5097 bge_sysctl_reg_read(SYSCTL_HANDLER_ARGS) 5098 { 5099 struct bge_softc *sc; 5100 int error; 5101 uint16_t result; 5102 uint32_t val; 5103 5104 result = -1; 5105 error = sysctl_handle_int(oidp, &result, 0, req); 5106 if (error || (req->newptr == NULL)) 5107 return (error); 5108 5109 if (result < 0x8000) { 5110 sc = (struct bge_softc *)arg1; 5111 val = CSR_READ_4(sc, result); 5112 printf("reg 0x%06X = 0x%08X\n", result, val); 5113 } 5114 5115 return (error); 5116 } 5117 5118 static int 5119 bge_sysctl_mem_read(SYSCTL_HANDLER_ARGS) 5120 { 5121 struct bge_softc *sc; 5122 int error; 5123 uint16_t result; 5124 uint32_t val; 5125 5126 result = -1; 5127 error = sysctl_handle_int(oidp, &result, 0, req); 5128 if (error || (req->newptr == NULL)) 5129 return (error); 5130 5131 if (result < 0x8000) { 5132 sc = (struct bge_softc *)arg1; 5133 val = bge_readmem_ind(sc, result); 5134 printf("mem 0x%06X = 0x%08X\n", result, val); 5135 } 5136 5137 return (error); 5138 } 5139 #endif 5140 5141 static int 5142 bge_get_eaddr_fw(struct bge_softc *sc, uint8_t ether_addr[]) 5143 { 5144 5145 if (sc->bge_flags & BGE_FLAG_EADDR) 5146 return (1); 5147 5148 #ifdef __sparc64__ 5149 OF_getetheraddr(sc->bge_dev, ether_addr); 5150 return (0); 5151 #endif 5152 return (1); 5153 } 5154 5155 static int 5156 bge_get_eaddr_mem(struct bge_softc *sc, uint8_t ether_addr[]) 5157 { 5158 uint32_t mac_addr; 5159 5160 mac_addr = bge_readmem_ind(sc, 0x0c14); 5161 if ((mac_addr >> 16) == 0x484b) { 5162 ether_addr[0] = (uint8_t)(mac_addr >> 8); 5163 ether_addr[1] = (uint8_t)mac_addr; 5164 mac_addr = bge_readmem_ind(sc, 0x0c18); 5165 ether_addr[2] = (uint8_t)(mac_addr >> 24); 5166 ether_addr[3] = (uint8_t)(mac_addr >> 16); 5167 ether_addr[4] = (uint8_t)(mac_addr >> 8); 5168 ether_addr[5] = (uint8_t)mac_addr; 5169 return (0); 5170 } 5171 return (1); 5172 } 5173 5174 static int 5175 bge_get_eaddr_nvram(struct bge_softc *sc, uint8_t ether_addr[]) 5176 { 5177 int mac_offset = BGE_EE_MAC_OFFSET; 5178 5179 if (sc->bge_asicrev == BGE_ASICREV_BCM5906) 5180 mac_offset = BGE_EE_MAC_OFFSET_5906; 5181 5182 return (bge_read_nvram(sc, ether_addr, mac_offset + 2, 5183 ETHER_ADDR_LEN)); 5184 } 5185 5186 static int 5187 bge_get_eaddr_eeprom(struct bge_softc *sc, uint8_t ether_addr[]) 5188 { 5189 5190 if (sc->bge_asicrev == BGE_ASICREV_BCM5906) 5191 return (1); 5192 5193 return (bge_read_eeprom(sc, ether_addr, BGE_EE_MAC_OFFSET + 2, 5194 ETHER_ADDR_LEN)); 5195 } 5196 5197 static int 5198 bge_get_eaddr(struct bge_softc *sc, uint8_t eaddr[]) 5199 { 5200 static const bge_eaddr_fcn_t bge_eaddr_funcs[] = { 5201 /* NOTE: Order is critical */ 5202 bge_get_eaddr_fw, 5203 bge_get_eaddr_mem, 5204 bge_get_eaddr_nvram, 5205 bge_get_eaddr_eeprom, 5206 NULL 5207 }; 5208 const bge_eaddr_fcn_t *func; 5209 5210 for (func = bge_eaddr_funcs; *func != NULL; ++func) { 5211 if ((*func)(sc, eaddr) == 0) 5212 break; 5213 } 5214 return (*func == NULL ? ENXIO : 0); 5215 } 5216