1 /*- 2 * SPDX-License-Identifier: BSD-4-Clause 3 * 4 * Copyright (c) 2001 Wind River Systems 5 * Copyright (c) 1997, 1998, 1999, 2001 6 * Bill Paul <wpaul@windriver.com>. All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 3. All advertising materials mentioning features or use of this software 17 * must display the following acknowledgement: 18 * This product includes software developed by Bill Paul. 19 * 4. Neither the name of the author nor the names of any co-contributors 20 * may be used to endorse or promote products derived from this software 21 * without specific prior written permission. 22 * 23 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 24 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 25 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 26 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 27 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 28 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 29 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 30 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 31 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 32 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 33 * THE POSSIBILITY OF SUCH DAMAGE. 34 */ 35 36 #include <sys/cdefs.h> 37 __FBSDID("$FreeBSD$"); 38 39 /* 40 * Broadcom BCM57xx(x)/BCM590x NetXtreme and NetLink family Ethernet driver 41 * 42 * The Broadcom BCM5700 is based on technology originally developed by 43 * Alteon Networks as part of the Tigon I and Tigon II Gigabit Ethernet 44 * MAC chips. The BCM5700, sometimes referred to as the Tigon III, has 45 * two on-board MIPS R4000 CPUs and can have as much as 16MB of external 46 * SSRAM. The BCM5700 supports TCP, UDP and IP checksum offload, jumbo 47 * frames, highly configurable RX filtering, and 16 RX and TX queues 48 * (which, along with RX filter rules, can be used for QOS applications). 49 * Other features, such as TCP segmentation, may be available as part 50 * of value-added firmware updates. Unlike the Tigon I and Tigon II, 51 * firmware images can be stored in hardware and need not be compiled 52 * into the driver. 53 * 54 * The BCM5700 supports the PCI v2.2 and PCI-X v1.0 standards, and will 55 * function in a 32-bit/64-bit 33/66Mhz bus, or a 64-bit/133Mhz bus. 56 * 57 * The BCM5701 is a single-chip solution incorporating both the BCM5700 58 * MAC and a BCM5401 10/100/1000 PHY. Unlike the BCM5700, the BCM5701 59 * does not support external SSRAM. 60 * 61 * Broadcom also produces a variation of the BCM5700 under the "Altima" 62 * brand name, which is functionally similar but lacks PCI-X support. 63 * 64 * Without external SSRAM, you can only have at most 4 TX rings, 65 * and the use of the mini RX ring is disabled. This seems to imply 66 * that these features are simply not available on the BCM5701. As a 67 * result, this driver does not implement any support for the mini RX 68 * ring. 69 */ 70 71 #ifdef HAVE_KERNEL_OPTION_HEADERS 72 #include "opt_device_polling.h" 73 #endif 74 75 #include <sys/param.h> 76 #include <sys/endian.h> 77 #include <sys/systm.h> 78 #include <sys/sockio.h> 79 #include <sys/mbuf.h> 80 #include <sys/malloc.h> 81 #include <sys/kernel.h> 82 #include <sys/module.h> 83 #include <sys/socket.h> 84 #include <sys/sysctl.h> 85 #include <sys/taskqueue.h> 86 87 #include <net/debugnet.h> 88 #include <net/if.h> 89 #include <net/if_var.h> 90 #include <net/if_arp.h> 91 #include <net/ethernet.h> 92 #include <net/if_dl.h> 93 #include <net/if_media.h> 94 95 #include <net/bpf.h> 96 97 #include <net/if_types.h> 98 #include <net/if_vlan_var.h> 99 100 #include <netinet/in_systm.h> 101 #include <netinet/in.h> 102 #include <netinet/ip.h> 103 #include <netinet/tcp.h> 104 105 #include <machine/bus.h> 106 #include <machine/resource.h> 107 #include <sys/bus.h> 108 #include <sys/rman.h> 109 110 #include <dev/mii/mii.h> 111 #include <dev/mii/miivar.h> 112 #include "miidevs.h" 113 #include <dev/mii/brgphyreg.h> 114 115 #ifdef __sparc64__ 116 #include <dev/ofw/ofw_bus.h> 117 #include <dev/ofw/openfirm.h> 118 #include <machine/ofw_machdep.h> 119 #include <machine/ver.h> 120 #endif 121 122 #include <dev/pci/pcireg.h> 123 #include <dev/pci/pcivar.h> 124 125 #include <dev/bge/if_bgereg.h> 126 127 #define BGE_CSUM_FEATURES (CSUM_IP | CSUM_TCP) 128 #define ETHER_MIN_NOPAD (ETHER_MIN_LEN - ETHER_CRC_LEN) /* i.e., 60 */ 129 130 MODULE_DEPEND(bge, pci, 1, 1, 1); 131 MODULE_DEPEND(bge, ether, 1, 1, 1); 132 MODULE_DEPEND(bge, miibus, 1, 1, 1); 133 134 /* "device miibus" required. See GENERIC if you get errors here. */ 135 #include "miibus_if.h" 136 137 /* 138 * Various supported device vendors/types and their names. Note: the 139 * spec seems to indicate that the hardware still has Alteon's vendor 140 * ID burned into it, though it will always be overriden by the vendor 141 * ID in the EEPROM. Just to be safe, we cover all possibilities. 142 */ 143 static const struct bge_type { 144 uint16_t bge_vid; 145 uint16_t bge_did; 146 } bge_devs[] = { 147 { ALTEON_VENDORID, ALTEON_DEVICEID_BCM5700 }, 148 { ALTEON_VENDORID, ALTEON_DEVICEID_BCM5701 }, 149 150 { ALTIMA_VENDORID, ALTIMA_DEVICE_AC1000 }, 151 { ALTIMA_VENDORID, ALTIMA_DEVICE_AC1002 }, 152 { ALTIMA_VENDORID, ALTIMA_DEVICE_AC9100 }, 153 154 { APPLE_VENDORID, APPLE_DEVICE_BCM5701 }, 155 156 { BCOM_VENDORID, BCOM_DEVICEID_BCM5700 }, 157 { BCOM_VENDORID, BCOM_DEVICEID_BCM5701 }, 158 { BCOM_VENDORID, BCOM_DEVICEID_BCM5702 }, 159 { BCOM_VENDORID, BCOM_DEVICEID_BCM5702_ALT }, 160 { BCOM_VENDORID, BCOM_DEVICEID_BCM5702X }, 161 { BCOM_VENDORID, BCOM_DEVICEID_BCM5703 }, 162 { BCOM_VENDORID, BCOM_DEVICEID_BCM5703_ALT }, 163 { BCOM_VENDORID, BCOM_DEVICEID_BCM5703X }, 164 { BCOM_VENDORID, BCOM_DEVICEID_BCM5704C }, 165 { BCOM_VENDORID, BCOM_DEVICEID_BCM5704S }, 166 { BCOM_VENDORID, BCOM_DEVICEID_BCM5704S_ALT }, 167 { BCOM_VENDORID, BCOM_DEVICEID_BCM5705 }, 168 { BCOM_VENDORID, BCOM_DEVICEID_BCM5705F }, 169 { BCOM_VENDORID, BCOM_DEVICEID_BCM5705K }, 170 { BCOM_VENDORID, BCOM_DEVICEID_BCM5705M }, 171 { BCOM_VENDORID, BCOM_DEVICEID_BCM5705M_ALT }, 172 { BCOM_VENDORID, BCOM_DEVICEID_BCM5714C }, 173 { BCOM_VENDORID, BCOM_DEVICEID_BCM5714S }, 174 { BCOM_VENDORID, BCOM_DEVICEID_BCM5715 }, 175 { BCOM_VENDORID, BCOM_DEVICEID_BCM5715S }, 176 { BCOM_VENDORID, BCOM_DEVICEID_BCM5717 }, 177 { BCOM_VENDORID, BCOM_DEVICEID_BCM5717C }, 178 { BCOM_VENDORID, BCOM_DEVICEID_BCM5718 }, 179 { BCOM_VENDORID, BCOM_DEVICEID_BCM5719 }, 180 { BCOM_VENDORID, BCOM_DEVICEID_BCM5720 }, 181 { BCOM_VENDORID, BCOM_DEVICEID_BCM5721 }, 182 { BCOM_VENDORID, BCOM_DEVICEID_BCM5722 }, 183 { BCOM_VENDORID, BCOM_DEVICEID_BCM5723 }, 184 { BCOM_VENDORID, BCOM_DEVICEID_BCM5725 }, 185 { BCOM_VENDORID, BCOM_DEVICEID_BCM5727 }, 186 { BCOM_VENDORID, BCOM_DEVICEID_BCM5750 }, 187 { BCOM_VENDORID, BCOM_DEVICEID_BCM5750M }, 188 { BCOM_VENDORID, BCOM_DEVICEID_BCM5751 }, 189 { BCOM_VENDORID, BCOM_DEVICEID_BCM5751F }, 190 { BCOM_VENDORID, BCOM_DEVICEID_BCM5751M }, 191 { BCOM_VENDORID, BCOM_DEVICEID_BCM5752 }, 192 { BCOM_VENDORID, BCOM_DEVICEID_BCM5752M }, 193 { BCOM_VENDORID, BCOM_DEVICEID_BCM5753 }, 194 { BCOM_VENDORID, BCOM_DEVICEID_BCM5753F }, 195 { BCOM_VENDORID, BCOM_DEVICEID_BCM5753M }, 196 { BCOM_VENDORID, BCOM_DEVICEID_BCM5754 }, 197 { BCOM_VENDORID, BCOM_DEVICEID_BCM5754M }, 198 { BCOM_VENDORID, BCOM_DEVICEID_BCM5755 }, 199 { BCOM_VENDORID, BCOM_DEVICEID_BCM5755M }, 200 { BCOM_VENDORID, BCOM_DEVICEID_BCM5756 }, 201 { BCOM_VENDORID, BCOM_DEVICEID_BCM5761 }, 202 { BCOM_VENDORID, BCOM_DEVICEID_BCM5761E }, 203 { BCOM_VENDORID, BCOM_DEVICEID_BCM5761S }, 204 { BCOM_VENDORID, BCOM_DEVICEID_BCM5761SE }, 205 { BCOM_VENDORID, BCOM_DEVICEID_BCM5762 }, 206 { BCOM_VENDORID, BCOM_DEVICEID_BCM5764 }, 207 { BCOM_VENDORID, BCOM_DEVICEID_BCM5780 }, 208 { BCOM_VENDORID, BCOM_DEVICEID_BCM5780S }, 209 { BCOM_VENDORID, BCOM_DEVICEID_BCM5781 }, 210 { BCOM_VENDORID, BCOM_DEVICEID_BCM5782 }, 211 { BCOM_VENDORID, BCOM_DEVICEID_BCM5784 }, 212 { BCOM_VENDORID, BCOM_DEVICEID_BCM5785F }, 213 { BCOM_VENDORID, BCOM_DEVICEID_BCM5785G }, 214 { BCOM_VENDORID, BCOM_DEVICEID_BCM5786 }, 215 { BCOM_VENDORID, BCOM_DEVICEID_BCM5787 }, 216 { BCOM_VENDORID, BCOM_DEVICEID_BCM5787F }, 217 { BCOM_VENDORID, BCOM_DEVICEID_BCM5787M }, 218 { BCOM_VENDORID, BCOM_DEVICEID_BCM5788 }, 219 { BCOM_VENDORID, BCOM_DEVICEID_BCM5789 }, 220 { BCOM_VENDORID, BCOM_DEVICEID_BCM5901 }, 221 { BCOM_VENDORID, BCOM_DEVICEID_BCM5901A2 }, 222 { BCOM_VENDORID, BCOM_DEVICEID_BCM5903M }, 223 { BCOM_VENDORID, BCOM_DEVICEID_BCM5906 }, 224 { BCOM_VENDORID, BCOM_DEVICEID_BCM5906M }, 225 { BCOM_VENDORID, BCOM_DEVICEID_BCM57760 }, 226 { BCOM_VENDORID, BCOM_DEVICEID_BCM57761 }, 227 { BCOM_VENDORID, BCOM_DEVICEID_BCM57762 }, 228 { BCOM_VENDORID, BCOM_DEVICEID_BCM57764 }, 229 { BCOM_VENDORID, BCOM_DEVICEID_BCM57765 }, 230 { BCOM_VENDORID, BCOM_DEVICEID_BCM57766 }, 231 { BCOM_VENDORID, BCOM_DEVICEID_BCM57767 }, 232 { BCOM_VENDORID, BCOM_DEVICEID_BCM57780 }, 233 { BCOM_VENDORID, BCOM_DEVICEID_BCM57781 }, 234 { BCOM_VENDORID, BCOM_DEVICEID_BCM57782 }, 235 { BCOM_VENDORID, BCOM_DEVICEID_BCM57785 }, 236 { BCOM_VENDORID, BCOM_DEVICEID_BCM57786 }, 237 { BCOM_VENDORID, BCOM_DEVICEID_BCM57787 }, 238 { BCOM_VENDORID, BCOM_DEVICEID_BCM57788 }, 239 { BCOM_VENDORID, BCOM_DEVICEID_BCM57790 }, 240 { BCOM_VENDORID, BCOM_DEVICEID_BCM57791 }, 241 { BCOM_VENDORID, BCOM_DEVICEID_BCM57795 }, 242 243 { SK_VENDORID, SK_DEVICEID_ALTIMA }, 244 245 { TC_VENDORID, TC_DEVICEID_3C996 }, 246 247 { FJTSU_VENDORID, FJTSU_DEVICEID_PW008GE4 }, 248 { FJTSU_VENDORID, FJTSU_DEVICEID_PW008GE5 }, 249 { FJTSU_VENDORID, FJTSU_DEVICEID_PP250450 }, 250 251 { 0, 0 } 252 }; 253 254 static const struct bge_vendor { 255 uint16_t v_id; 256 const char *v_name; 257 } bge_vendors[] = { 258 { ALTEON_VENDORID, "Alteon" }, 259 { ALTIMA_VENDORID, "Altima" }, 260 { APPLE_VENDORID, "Apple" }, 261 { BCOM_VENDORID, "Broadcom" }, 262 { SK_VENDORID, "SysKonnect" }, 263 { TC_VENDORID, "3Com" }, 264 { FJTSU_VENDORID, "Fujitsu" }, 265 266 { 0, NULL } 267 }; 268 269 static const struct bge_revision { 270 uint32_t br_chipid; 271 const char *br_name; 272 } bge_revisions[] = { 273 { BGE_CHIPID_BCM5700_A0, "BCM5700 A0" }, 274 { BGE_CHIPID_BCM5700_A1, "BCM5700 A1" }, 275 { BGE_CHIPID_BCM5700_B0, "BCM5700 B0" }, 276 { BGE_CHIPID_BCM5700_B1, "BCM5700 B1" }, 277 { BGE_CHIPID_BCM5700_B2, "BCM5700 B2" }, 278 { BGE_CHIPID_BCM5700_B3, "BCM5700 B3" }, 279 { BGE_CHIPID_BCM5700_ALTIMA, "BCM5700 Altima" }, 280 { BGE_CHIPID_BCM5700_C0, "BCM5700 C0" }, 281 { BGE_CHIPID_BCM5701_A0, "BCM5701 A0" }, 282 { BGE_CHIPID_BCM5701_B0, "BCM5701 B0" }, 283 { BGE_CHIPID_BCM5701_B2, "BCM5701 B2" }, 284 { BGE_CHIPID_BCM5701_B5, "BCM5701 B5" }, 285 { BGE_CHIPID_BCM5703_A0, "BCM5703 A0" }, 286 { BGE_CHIPID_BCM5703_A1, "BCM5703 A1" }, 287 { BGE_CHIPID_BCM5703_A2, "BCM5703 A2" }, 288 { BGE_CHIPID_BCM5703_A3, "BCM5703 A3" }, 289 { BGE_CHIPID_BCM5703_B0, "BCM5703 B0" }, 290 { BGE_CHIPID_BCM5704_A0, "BCM5704 A0" }, 291 { BGE_CHIPID_BCM5704_A1, "BCM5704 A1" }, 292 { BGE_CHIPID_BCM5704_A2, "BCM5704 A2" }, 293 { BGE_CHIPID_BCM5704_A3, "BCM5704 A3" }, 294 { BGE_CHIPID_BCM5704_B0, "BCM5704 B0" }, 295 { BGE_CHIPID_BCM5705_A0, "BCM5705 A0" }, 296 { BGE_CHIPID_BCM5705_A1, "BCM5705 A1" }, 297 { BGE_CHIPID_BCM5705_A2, "BCM5705 A2" }, 298 { BGE_CHIPID_BCM5705_A3, "BCM5705 A3" }, 299 { BGE_CHIPID_BCM5750_A0, "BCM5750 A0" }, 300 { BGE_CHIPID_BCM5750_A1, "BCM5750 A1" }, 301 { BGE_CHIPID_BCM5750_A3, "BCM5750 A3" }, 302 { BGE_CHIPID_BCM5750_B0, "BCM5750 B0" }, 303 { BGE_CHIPID_BCM5750_B1, "BCM5750 B1" }, 304 { BGE_CHIPID_BCM5750_C0, "BCM5750 C0" }, 305 { BGE_CHIPID_BCM5750_C1, "BCM5750 C1" }, 306 { BGE_CHIPID_BCM5750_C2, "BCM5750 C2" }, 307 { BGE_CHIPID_BCM5714_A0, "BCM5714 A0" }, 308 { BGE_CHIPID_BCM5752_A0, "BCM5752 A0" }, 309 { BGE_CHIPID_BCM5752_A1, "BCM5752 A1" }, 310 { BGE_CHIPID_BCM5752_A2, "BCM5752 A2" }, 311 { BGE_CHIPID_BCM5714_B0, "BCM5714 B0" }, 312 { BGE_CHIPID_BCM5714_B3, "BCM5714 B3" }, 313 { BGE_CHIPID_BCM5715_A0, "BCM5715 A0" }, 314 { BGE_CHIPID_BCM5715_A1, "BCM5715 A1" }, 315 { BGE_CHIPID_BCM5715_A3, "BCM5715 A3" }, 316 { BGE_CHIPID_BCM5717_A0, "BCM5717 A0" }, 317 { BGE_CHIPID_BCM5717_B0, "BCM5717 B0" }, 318 { BGE_CHIPID_BCM5717_C0, "BCM5717 C0" }, 319 { BGE_CHIPID_BCM5719_A0, "BCM5719 A0" }, 320 { BGE_CHIPID_BCM5720_A0, "BCM5720 A0" }, 321 { BGE_CHIPID_BCM5755_A0, "BCM5755 A0" }, 322 { BGE_CHIPID_BCM5755_A1, "BCM5755 A1" }, 323 { BGE_CHIPID_BCM5755_A2, "BCM5755 A2" }, 324 { BGE_CHIPID_BCM5722_A0, "BCM5722 A0" }, 325 { BGE_CHIPID_BCM5761_A0, "BCM5761 A0" }, 326 { BGE_CHIPID_BCM5761_A1, "BCM5761 A1" }, 327 { BGE_CHIPID_BCM5762_A0, "BCM5762 A0" }, 328 { BGE_CHIPID_BCM5784_A0, "BCM5784 A0" }, 329 { BGE_CHIPID_BCM5784_A1, "BCM5784 A1" }, 330 /* 5754 and 5787 share the same ASIC ID */ 331 { BGE_CHIPID_BCM5787_A0, "BCM5754/5787 A0" }, 332 { BGE_CHIPID_BCM5787_A1, "BCM5754/5787 A1" }, 333 { BGE_CHIPID_BCM5787_A2, "BCM5754/5787 A2" }, 334 { BGE_CHIPID_BCM5906_A1, "BCM5906 A1" }, 335 { BGE_CHIPID_BCM5906_A2, "BCM5906 A2" }, 336 { BGE_CHIPID_BCM57765_A0, "BCM57765 A0" }, 337 { BGE_CHIPID_BCM57765_B0, "BCM57765 B0" }, 338 { BGE_CHIPID_BCM57780_A0, "BCM57780 A0" }, 339 { BGE_CHIPID_BCM57780_A1, "BCM57780 A1" }, 340 341 { 0, NULL } 342 }; 343 344 /* 345 * Some defaults for major revisions, so that newer steppings 346 * that we don't know about have a shot at working. 347 */ 348 static const struct bge_revision bge_majorrevs[] = { 349 { BGE_ASICREV_BCM5700, "unknown BCM5700" }, 350 { BGE_ASICREV_BCM5701, "unknown BCM5701" }, 351 { BGE_ASICREV_BCM5703, "unknown BCM5703" }, 352 { BGE_ASICREV_BCM5704, "unknown BCM5704" }, 353 { BGE_ASICREV_BCM5705, "unknown BCM5705" }, 354 { BGE_ASICREV_BCM5750, "unknown BCM5750" }, 355 { BGE_ASICREV_BCM5714_A0, "unknown BCM5714" }, 356 { BGE_ASICREV_BCM5752, "unknown BCM5752" }, 357 { BGE_ASICREV_BCM5780, "unknown BCM5780" }, 358 { BGE_ASICREV_BCM5714, "unknown BCM5714" }, 359 { BGE_ASICREV_BCM5755, "unknown BCM5755" }, 360 { BGE_ASICREV_BCM5761, "unknown BCM5761" }, 361 { BGE_ASICREV_BCM5784, "unknown BCM5784" }, 362 { BGE_ASICREV_BCM5785, "unknown BCM5785" }, 363 /* 5754 and 5787 share the same ASIC ID */ 364 { BGE_ASICREV_BCM5787, "unknown BCM5754/5787" }, 365 { BGE_ASICREV_BCM5906, "unknown BCM5906" }, 366 { BGE_ASICREV_BCM57765, "unknown BCM57765" }, 367 { BGE_ASICREV_BCM57766, "unknown BCM57766" }, 368 { BGE_ASICREV_BCM57780, "unknown BCM57780" }, 369 { BGE_ASICREV_BCM5717, "unknown BCM5717" }, 370 { BGE_ASICREV_BCM5719, "unknown BCM5719" }, 371 { BGE_ASICREV_BCM5720, "unknown BCM5720" }, 372 { BGE_ASICREV_BCM5762, "unknown BCM5762" }, 373 374 { 0, NULL } 375 }; 376 377 #define BGE_IS_JUMBO_CAPABLE(sc) ((sc)->bge_flags & BGE_FLAG_JUMBO) 378 #define BGE_IS_5700_FAMILY(sc) ((sc)->bge_flags & BGE_FLAG_5700_FAMILY) 379 #define BGE_IS_5705_PLUS(sc) ((sc)->bge_flags & BGE_FLAG_5705_PLUS) 380 #define BGE_IS_5714_FAMILY(sc) ((sc)->bge_flags & BGE_FLAG_5714_FAMILY) 381 #define BGE_IS_575X_PLUS(sc) ((sc)->bge_flags & BGE_FLAG_575X_PLUS) 382 #define BGE_IS_5755_PLUS(sc) ((sc)->bge_flags & BGE_FLAG_5755_PLUS) 383 #define BGE_IS_5717_PLUS(sc) ((sc)->bge_flags & BGE_FLAG_5717_PLUS) 384 #define BGE_IS_57765_PLUS(sc) ((sc)->bge_flags & BGE_FLAG_57765_PLUS) 385 386 static uint32_t bge_chipid(device_t); 387 static const struct bge_vendor * bge_lookup_vendor(uint16_t); 388 static const struct bge_revision * bge_lookup_rev(uint32_t); 389 390 typedef int (*bge_eaddr_fcn_t)(struct bge_softc *, uint8_t[]); 391 392 static int bge_probe(device_t); 393 static int bge_attach(device_t); 394 static int bge_detach(device_t); 395 static int bge_suspend(device_t); 396 static int bge_resume(device_t); 397 static void bge_release_resources(struct bge_softc *); 398 static void bge_dma_map_addr(void *, bus_dma_segment_t *, int, int); 399 static int bge_dma_alloc(struct bge_softc *); 400 static void bge_dma_free(struct bge_softc *); 401 static int bge_dma_ring_alloc(struct bge_softc *, bus_size_t, bus_size_t, 402 bus_dma_tag_t *, uint8_t **, bus_dmamap_t *, bus_addr_t *, const char *); 403 404 static void bge_devinfo(struct bge_softc *); 405 static int bge_mbox_reorder(struct bge_softc *); 406 407 static int bge_get_eaddr_fw(struct bge_softc *sc, uint8_t ether_addr[]); 408 static int bge_get_eaddr_mem(struct bge_softc *, uint8_t[]); 409 static int bge_get_eaddr_nvram(struct bge_softc *, uint8_t[]); 410 static int bge_get_eaddr_eeprom(struct bge_softc *, uint8_t[]); 411 static int bge_get_eaddr(struct bge_softc *, uint8_t[]); 412 413 static void bge_txeof(struct bge_softc *, uint16_t); 414 static void bge_rxcsum(struct bge_softc *, struct bge_rx_bd *, struct mbuf *); 415 static int bge_rxeof(struct bge_softc *, uint16_t, int); 416 417 static void bge_asf_driver_up (struct bge_softc *); 418 static void bge_tick(void *); 419 static void bge_stats_clear_regs(struct bge_softc *); 420 static void bge_stats_update(struct bge_softc *); 421 static void bge_stats_update_regs(struct bge_softc *); 422 static struct mbuf *bge_check_short_dma(struct mbuf *); 423 static struct mbuf *bge_setup_tso(struct bge_softc *, struct mbuf *, 424 uint16_t *, uint16_t *); 425 static int bge_encap(struct bge_softc *, struct mbuf **, uint32_t *); 426 427 static void bge_intr(void *); 428 static int bge_msi_intr(void *); 429 static void bge_intr_task(void *, int); 430 static void bge_start(if_t); 431 static void bge_start_locked(if_t); 432 static void bge_start_tx(struct bge_softc *, uint32_t); 433 static int bge_ioctl(if_t, u_long, caddr_t); 434 static void bge_init_locked(struct bge_softc *); 435 static void bge_init(void *); 436 static void bge_stop_block(struct bge_softc *, bus_size_t, uint32_t); 437 static void bge_stop(struct bge_softc *); 438 static void bge_watchdog(struct bge_softc *); 439 static int bge_shutdown(device_t); 440 static int bge_ifmedia_upd_locked(if_t); 441 static int bge_ifmedia_upd(if_t); 442 static void bge_ifmedia_sts(if_t, struct ifmediareq *); 443 static uint64_t bge_get_counter(if_t, ift_counter); 444 445 static uint8_t bge_nvram_getbyte(struct bge_softc *, int, uint8_t *); 446 static int bge_read_nvram(struct bge_softc *, caddr_t, int, int); 447 448 static uint8_t bge_eeprom_getbyte(struct bge_softc *, int, uint8_t *); 449 static int bge_read_eeprom(struct bge_softc *, caddr_t, int, int); 450 451 static void bge_setpromisc(struct bge_softc *); 452 static void bge_setmulti(struct bge_softc *); 453 static void bge_setvlan(struct bge_softc *); 454 455 static __inline void bge_rxreuse_std(struct bge_softc *, int); 456 static __inline void bge_rxreuse_jumbo(struct bge_softc *, int); 457 static int bge_newbuf_std(struct bge_softc *, int); 458 static int bge_newbuf_jumbo(struct bge_softc *, int); 459 static int bge_init_rx_ring_std(struct bge_softc *); 460 static void bge_free_rx_ring_std(struct bge_softc *); 461 static int bge_init_rx_ring_jumbo(struct bge_softc *); 462 static void bge_free_rx_ring_jumbo(struct bge_softc *); 463 static void bge_free_tx_ring(struct bge_softc *); 464 static int bge_init_tx_ring(struct bge_softc *); 465 466 static int bge_chipinit(struct bge_softc *); 467 static int bge_blockinit(struct bge_softc *); 468 static uint32_t bge_dma_swap_options(struct bge_softc *); 469 470 static int bge_has_eaddr(struct bge_softc *); 471 static uint32_t bge_readmem_ind(struct bge_softc *, int); 472 static void bge_writemem_ind(struct bge_softc *, int, int); 473 static void bge_writembx(struct bge_softc *, int, int); 474 #ifdef notdef 475 static uint32_t bge_readreg_ind(struct bge_softc *, int); 476 #endif 477 static void bge_writemem_direct(struct bge_softc *, int, int); 478 static void bge_writereg_ind(struct bge_softc *, int, int); 479 480 static int bge_miibus_readreg(device_t, int, int); 481 static int bge_miibus_writereg(device_t, int, int, int); 482 static void bge_miibus_statchg(device_t); 483 #ifdef DEVICE_POLLING 484 static int bge_poll(if_t ifp, enum poll_cmd cmd, int count); 485 #endif 486 487 #define BGE_RESET_SHUTDOWN 0 488 #define BGE_RESET_START 1 489 #define BGE_RESET_SUSPEND 2 490 static void bge_sig_post_reset(struct bge_softc *, int); 491 static void bge_sig_legacy(struct bge_softc *, int); 492 static void bge_sig_pre_reset(struct bge_softc *, int); 493 static void bge_stop_fw(struct bge_softc *); 494 static int bge_reset(struct bge_softc *); 495 static void bge_link_upd(struct bge_softc *); 496 497 static void bge_ape_lock_init(struct bge_softc *); 498 static void bge_ape_read_fw_ver(struct bge_softc *); 499 static int bge_ape_lock(struct bge_softc *, int); 500 static void bge_ape_unlock(struct bge_softc *, int); 501 static void bge_ape_send_event(struct bge_softc *, uint32_t); 502 static void bge_ape_driver_state_change(struct bge_softc *, int); 503 504 /* 505 * The BGE_REGISTER_DEBUG option is only for low-level debugging. It may 506 * leak information to untrusted users. It is also known to cause alignment 507 * traps on certain architectures. 508 */ 509 #ifdef BGE_REGISTER_DEBUG 510 static int bge_sysctl_debug_info(SYSCTL_HANDLER_ARGS); 511 static int bge_sysctl_reg_read(SYSCTL_HANDLER_ARGS); 512 static int bge_sysctl_ape_read(SYSCTL_HANDLER_ARGS); 513 static int bge_sysctl_mem_read(SYSCTL_HANDLER_ARGS); 514 #endif 515 static void bge_add_sysctls(struct bge_softc *); 516 static void bge_add_sysctl_stats_regs(struct bge_softc *, 517 struct sysctl_ctx_list *, struct sysctl_oid_list *); 518 static void bge_add_sysctl_stats(struct bge_softc *, struct sysctl_ctx_list *, 519 struct sysctl_oid_list *); 520 static int bge_sysctl_stats(SYSCTL_HANDLER_ARGS); 521 522 DEBUGNET_DEFINE(bge); 523 524 static device_method_t bge_methods[] = { 525 /* Device interface */ 526 DEVMETHOD(device_probe, bge_probe), 527 DEVMETHOD(device_attach, bge_attach), 528 DEVMETHOD(device_detach, bge_detach), 529 DEVMETHOD(device_shutdown, bge_shutdown), 530 DEVMETHOD(device_suspend, bge_suspend), 531 DEVMETHOD(device_resume, bge_resume), 532 533 /* MII interface */ 534 DEVMETHOD(miibus_readreg, bge_miibus_readreg), 535 DEVMETHOD(miibus_writereg, bge_miibus_writereg), 536 DEVMETHOD(miibus_statchg, bge_miibus_statchg), 537 538 DEVMETHOD_END 539 }; 540 541 static driver_t bge_driver = { 542 "bge", 543 bge_methods, 544 sizeof(struct bge_softc) 545 }; 546 547 static devclass_t bge_devclass; 548 549 DRIVER_MODULE(bge, pci, bge_driver, bge_devclass, 0, 0); 550 MODULE_PNP_INFO("U16:vendor;U16:device", pci, bge, bge_devs, 551 nitems(bge_devs) - 1); 552 DRIVER_MODULE(miibus, bge, miibus_driver, miibus_devclass, 0, 0); 553 554 static int bge_allow_asf = 1; 555 556 static SYSCTL_NODE(_hw, OID_AUTO, bge, CTLFLAG_RD, 0, "BGE driver parameters"); 557 SYSCTL_INT(_hw_bge, OID_AUTO, allow_asf, CTLFLAG_RDTUN, &bge_allow_asf, 0, 558 "Allow ASF mode if available"); 559 560 #define SPARC64_BLADE_1500_MODEL "SUNW,Sun-Blade-1500" 561 #define SPARC64_BLADE_1500_PATH_BGE "/pci@1f,700000/network@2" 562 #define SPARC64_BLADE_2500_MODEL "SUNW,Sun-Blade-2500" 563 #define SPARC64_BLADE_2500_PATH_BGE "/pci@1c,600000/network@3" 564 #define SPARC64_OFW_SUBVENDOR "subsystem-vendor-id" 565 566 static int 567 bge_has_eaddr(struct bge_softc *sc) 568 { 569 #ifdef __sparc64__ 570 char buf[sizeof(SPARC64_BLADE_1500_PATH_BGE)]; 571 device_t dev; 572 uint32_t subvendor; 573 574 dev = sc->bge_dev; 575 576 /* 577 * The on-board BGEs found in sun4u machines aren't fitted with 578 * an EEPROM which means that we have to obtain the MAC address 579 * via OFW and that some tests will always fail. We distinguish 580 * such BGEs by the subvendor ID, which also has to be obtained 581 * from OFW instead of the PCI configuration space as the latter 582 * indicates Broadcom as the subvendor of the netboot interface. 583 * For early Blade 1500 and 2500 we even have to check the OFW 584 * device path as the subvendor ID always defaults to Broadcom 585 * there. 586 */ 587 if (OF_getprop(ofw_bus_get_node(dev), SPARC64_OFW_SUBVENDOR, 588 &subvendor, sizeof(subvendor)) == sizeof(subvendor) && 589 (subvendor == FJTSU_VENDORID || subvendor == SUN_VENDORID)) 590 return (0); 591 memset(buf, 0, sizeof(buf)); 592 if (OF_package_to_path(ofw_bus_get_node(dev), buf, sizeof(buf)) > 0) { 593 if (strcmp(sparc64_model, SPARC64_BLADE_1500_MODEL) == 0 && 594 strcmp(buf, SPARC64_BLADE_1500_PATH_BGE) == 0) 595 return (0); 596 if (strcmp(sparc64_model, SPARC64_BLADE_2500_MODEL) == 0 && 597 strcmp(buf, SPARC64_BLADE_2500_PATH_BGE) == 0) 598 return (0); 599 } 600 #endif 601 return (1); 602 } 603 604 static uint32_t 605 bge_readmem_ind(struct bge_softc *sc, int off) 606 { 607 device_t dev; 608 uint32_t val; 609 610 if (sc->bge_asicrev == BGE_ASICREV_BCM5906 && 611 off >= BGE_STATS_BLOCK && off < BGE_SEND_RING_1_TO_4) 612 return (0); 613 614 dev = sc->bge_dev; 615 616 pci_write_config(dev, BGE_PCI_MEMWIN_BASEADDR, off, 4); 617 val = pci_read_config(dev, BGE_PCI_MEMWIN_DATA, 4); 618 pci_write_config(dev, BGE_PCI_MEMWIN_BASEADDR, 0, 4); 619 return (val); 620 } 621 622 static void 623 bge_writemem_ind(struct bge_softc *sc, int off, int val) 624 { 625 device_t dev; 626 627 if (sc->bge_asicrev == BGE_ASICREV_BCM5906 && 628 off >= BGE_STATS_BLOCK && off < BGE_SEND_RING_1_TO_4) 629 return; 630 631 dev = sc->bge_dev; 632 633 pci_write_config(dev, BGE_PCI_MEMWIN_BASEADDR, off, 4); 634 pci_write_config(dev, BGE_PCI_MEMWIN_DATA, val, 4); 635 pci_write_config(dev, BGE_PCI_MEMWIN_BASEADDR, 0, 4); 636 } 637 638 #ifdef notdef 639 static uint32_t 640 bge_readreg_ind(struct bge_softc *sc, int off) 641 { 642 device_t dev; 643 644 dev = sc->bge_dev; 645 646 pci_write_config(dev, BGE_PCI_REG_BASEADDR, off, 4); 647 return (pci_read_config(dev, BGE_PCI_REG_DATA, 4)); 648 } 649 #endif 650 651 static void 652 bge_writereg_ind(struct bge_softc *sc, int off, int val) 653 { 654 device_t dev; 655 656 dev = sc->bge_dev; 657 658 pci_write_config(dev, BGE_PCI_REG_BASEADDR, off, 4); 659 pci_write_config(dev, BGE_PCI_REG_DATA, val, 4); 660 } 661 662 static void 663 bge_writemem_direct(struct bge_softc *sc, int off, int val) 664 { 665 CSR_WRITE_4(sc, off, val); 666 } 667 668 static void 669 bge_writembx(struct bge_softc *sc, int off, int val) 670 { 671 if (sc->bge_asicrev == BGE_ASICREV_BCM5906) 672 off += BGE_LPMBX_IRQ0_HI - BGE_MBX_IRQ0_HI; 673 674 CSR_WRITE_4(sc, off, val); 675 if ((sc->bge_flags & BGE_FLAG_MBOX_REORDER) != 0) 676 CSR_READ_4(sc, off); 677 } 678 679 /* 680 * Clear all stale locks and select the lock for this driver instance. 681 */ 682 static void 683 bge_ape_lock_init(struct bge_softc *sc) 684 { 685 uint32_t bit, regbase; 686 int i; 687 688 if (sc->bge_asicrev == BGE_ASICREV_BCM5761) 689 regbase = BGE_APE_LOCK_GRANT; 690 else 691 regbase = BGE_APE_PER_LOCK_GRANT; 692 693 /* Clear any stale locks. */ 694 for (i = BGE_APE_LOCK_PHY0; i <= BGE_APE_LOCK_GPIO; i++) { 695 switch (i) { 696 case BGE_APE_LOCK_PHY0: 697 case BGE_APE_LOCK_PHY1: 698 case BGE_APE_LOCK_PHY2: 699 case BGE_APE_LOCK_PHY3: 700 bit = BGE_APE_LOCK_GRANT_DRIVER0; 701 break; 702 default: 703 if (sc->bge_func_addr == 0) 704 bit = BGE_APE_LOCK_GRANT_DRIVER0; 705 else 706 bit = (1 << sc->bge_func_addr); 707 } 708 APE_WRITE_4(sc, regbase + 4 * i, bit); 709 } 710 711 /* Select the PHY lock based on the device's function number. */ 712 switch (sc->bge_func_addr) { 713 case 0: 714 sc->bge_phy_ape_lock = BGE_APE_LOCK_PHY0; 715 break; 716 case 1: 717 sc->bge_phy_ape_lock = BGE_APE_LOCK_PHY1; 718 break; 719 case 2: 720 sc->bge_phy_ape_lock = BGE_APE_LOCK_PHY2; 721 break; 722 case 3: 723 sc->bge_phy_ape_lock = BGE_APE_LOCK_PHY3; 724 break; 725 default: 726 device_printf(sc->bge_dev, 727 "PHY lock not supported on this function\n"); 728 } 729 } 730 731 /* 732 * Check for APE firmware, set flags, and print version info. 733 */ 734 static void 735 bge_ape_read_fw_ver(struct bge_softc *sc) 736 { 737 const char *fwtype; 738 uint32_t apedata, features; 739 740 /* Check for a valid APE signature in shared memory. */ 741 apedata = APE_READ_4(sc, BGE_APE_SEG_SIG); 742 if (apedata != BGE_APE_SEG_SIG_MAGIC) { 743 sc->bge_mfw_flags &= ~ BGE_MFW_ON_APE; 744 return; 745 } 746 747 /* Check if APE firmware is running. */ 748 apedata = APE_READ_4(sc, BGE_APE_FW_STATUS); 749 if ((apedata & BGE_APE_FW_STATUS_READY) == 0) { 750 device_printf(sc->bge_dev, "APE signature found " 751 "but FW status not ready! 0x%08x\n", apedata); 752 return; 753 } 754 755 sc->bge_mfw_flags |= BGE_MFW_ON_APE; 756 757 /* Fetch the APE firwmare type and version. */ 758 apedata = APE_READ_4(sc, BGE_APE_FW_VERSION); 759 features = APE_READ_4(sc, BGE_APE_FW_FEATURES); 760 if ((features & BGE_APE_FW_FEATURE_NCSI) != 0) { 761 sc->bge_mfw_flags |= BGE_MFW_TYPE_NCSI; 762 fwtype = "NCSI"; 763 } else if ((features & BGE_APE_FW_FEATURE_DASH) != 0) { 764 sc->bge_mfw_flags |= BGE_MFW_TYPE_DASH; 765 fwtype = "DASH"; 766 } else 767 fwtype = "UNKN"; 768 769 /* Print the APE firmware version. */ 770 device_printf(sc->bge_dev, "APE FW version: %s v%d.%d.%d.%d\n", 771 fwtype, 772 (apedata & BGE_APE_FW_VERSION_MAJMSK) >> BGE_APE_FW_VERSION_MAJSFT, 773 (apedata & BGE_APE_FW_VERSION_MINMSK) >> BGE_APE_FW_VERSION_MINSFT, 774 (apedata & BGE_APE_FW_VERSION_REVMSK) >> BGE_APE_FW_VERSION_REVSFT, 775 (apedata & BGE_APE_FW_VERSION_BLDMSK)); 776 } 777 778 static int 779 bge_ape_lock(struct bge_softc *sc, int locknum) 780 { 781 uint32_t bit, gnt, req, status; 782 int i, off; 783 784 if ((sc->bge_mfw_flags & BGE_MFW_ON_APE) == 0) 785 return (0); 786 787 /* Lock request/grant registers have different bases. */ 788 if (sc->bge_asicrev == BGE_ASICREV_BCM5761) { 789 req = BGE_APE_LOCK_REQ; 790 gnt = BGE_APE_LOCK_GRANT; 791 } else { 792 req = BGE_APE_PER_LOCK_REQ; 793 gnt = BGE_APE_PER_LOCK_GRANT; 794 } 795 796 off = 4 * locknum; 797 798 switch (locknum) { 799 case BGE_APE_LOCK_GPIO: 800 /* Lock required when using GPIO. */ 801 if (sc->bge_asicrev == BGE_ASICREV_BCM5761) 802 return (0); 803 if (sc->bge_func_addr == 0) 804 bit = BGE_APE_LOCK_REQ_DRIVER0; 805 else 806 bit = (1 << sc->bge_func_addr); 807 break; 808 case BGE_APE_LOCK_GRC: 809 /* Lock required to reset the device. */ 810 if (sc->bge_func_addr == 0) 811 bit = BGE_APE_LOCK_REQ_DRIVER0; 812 else 813 bit = (1 << sc->bge_func_addr); 814 break; 815 case BGE_APE_LOCK_MEM: 816 /* Lock required when accessing certain APE memory. */ 817 if (sc->bge_func_addr == 0) 818 bit = BGE_APE_LOCK_REQ_DRIVER0; 819 else 820 bit = (1 << sc->bge_func_addr); 821 break; 822 case BGE_APE_LOCK_PHY0: 823 case BGE_APE_LOCK_PHY1: 824 case BGE_APE_LOCK_PHY2: 825 case BGE_APE_LOCK_PHY3: 826 /* Lock required when accessing PHYs. */ 827 bit = BGE_APE_LOCK_REQ_DRIVER0; 828 break; 829 default: 830 return (EINVAL); 831 } 832 833 /* Request a lock. */ 834 APE_WRITE_4(sc, req + off, bit); 835 836 /* Wait up to 1 second to acquire lock. */ 837 for (i = 0; i < 20000; i++) { 838 status = APE_READ_4(sc, gnt + off); 839 if (status == bit) 840 break; 841 DELAY(50); 842 } 843 844 /* Handle any errors. */ 845 if (status != bit) { 846 device_printf(sc->bge_dev, "APE lock %d request failed! " 847 "request = 0x%04x[0x%04x], status = 0x%04x[0x%04x]\n", 848 locknum, req + off, bit & 0xFFFF, gnt + off, 849 status & 0xFFFF); 850 /* Revoke the lock request. */ 851 APE_WRITE_4(sc, gnt + off, bit); 852 return (EBUSY); 853 } 854 855 return (0); 856 } 857 858 static void 859 bge_ape_unlock(struct bge_softc *sc, int locknum) 860 { 861 uint32_t bit, gnt; 862 int off; 863 864 if ((sc->bge_mfw_flags & BGE_MFW_ON_APE) == 0) 865 return; 866 867 if (sc->bge_asicrev == BGE_ASICREV_BCM5761) 868 gnt = BGE_APE_LOCK_GRANT; 869 else 870 gnt = BGE_APE_PER_LOCK_GRANT; 871 872 off = 4 * locknum; 873 874 switch (locknum) { 875 case BGE_APE_LOCK_GPIO: 876 if (sc->bge_asicrev == BGE_ASICREV_BCM5761) 877 return; 878 if (sc->bge_func_addr == 0) 879 bit = BGE_APE_LOCK_GRANT_DRIVER0; 880 else 881 bit = (1 << sc->bge_func_addr); 882 break; 883 case BGE_APE_LOCK_GRC: 884 if (sc->bge_func_addr == 0) 885 bit = BGE_APE_LOCK_GRANT_DRIVER0; 886 else 887 bit = (1 << sc->bge_func_addr); 888 break; 889 case BGE_APE_LOCK_MEM: 890 if (sc->bge_func_addr == 0) 891 bit = BGE_APE_LOCK_GRANT_DRIVER0; 892 else 893 bit = (1 << sc->bge_func_addr); 894 break; 895 case BGE_APE_LOCK_PHY0: 896 case BGE_APE_LOCK_PHY1: 897 case BGE_APE_LOCK_PHY2: 898 case BGE_APE_LOCK_PHY3: 899 bit = BGE_APE_LOCK_GRANT_DRIVER0; 900 break; 901 default: 902 return; 903 } 904 905 APE_WRITE_4(sc, gnt + off, bit); 906 } 907 908 /* 909 * Send an event to the APE firmware. 910 */ 911 static void 912 bge_ape_send_event(struct bge_softc *sc, uint32_t event) 913 { 914 uint32_t apedata; 915 int i; 916 917 /* NCSI does not support APE events. */ 918 if ((sc->bge_mfw_flags & BGE_MFW_ON_APE) == 0) 919 return; 920 921 /* Wait up to 1ms for APE to service previous event. */ 922 for (i = 10; i > 0; i--) { 923 if (bge_ape_lock(sc, BGE_APE_LOCK_MEM) != 0) 924 break; 925 apedata = APE_READ_4(sc, BGE_APE_EVENT_STATUS); 926 if ((apedata & BGE_APE_EVENT_STATUS_EVENT_PENDING) == 0) { 927 APE_WRITE_4(sc, BGE_APE_EVENT_STATUS, event | 928 BGE_APE_EVENT_STATUS_EVENT_PENDING); 929 bge_ape_unlock(sc, BGE_APE_LOCK_MEM); 930 APE_WRITE_4(sc, BGE_APE_EVENT, BGE_APE_EVENT_1); 931 break; 932 } 933 bge_ape_unlock(sc, BGE_APE_LOCK_MEM); 934 DELAY(100); 935 } 936 if (i == 0) 937 device_printf(sc->bge_dev, "APE event 0x%08x send timed out\n", 938 event); 939 } 940 941 static void 942 bge_ape_driver_state_change(struct bge_softc *sc, int kind) 943 { 944 uint32_t apedata, event; 945 946 if ((sc->bge_mfw_flags & BGE_MFW_ON_APE) == 0) 947 return; 948 949 switch (kind) { 950 case BGE_RESET_START: 951 /* If this is the first load, clear the load counter. */ 952 apedata = APE_READ_4(sc, BGE_APE_HOST_SEG_SIG); 953 if (apedata != BGE_APE_HOST_SEG_SIG_MAGIC) 954 APE_WRITE_4(sc, BGE_APE_HOST_INIT_COUNT, 0); 955 else { 956 apedata = APE_READ_4(sc, BGE_APE_HOST_INIT_COUNT); 957 APE_WRITE_4(sc, BGE_APE_HOST_INIT_COUNT, ++apedata); 958 } 959 APE_WRITE_4(sc, BGE_APE_HOST_SEG_SIG, 960 BGE_APE_HOST_SEG_SIG_MAGIC); 961 APE_WRITE_4(sc, BGE_APE_HOST_SEG_LEN, 962 BGE_APE_HOST_SEG_LEN_MAGIC); 963 964 /* Add some version info if bge(4) supports it. */ 965 APE_WRITE_4(sc, BGE_APE_HOST_DRIVER_ID, 966 BGE_APE_HOST_DRIVER_ID_MAGIC(1, 0)); 967 APE_WRITE_4(sc, BGE_APE_HOST_BEHAVIOR, 968 BGE_APE_HOST_BEHAV_NO_PHYLOCK); 969 APE_WRITE_4(sc, BGE_APE_HOST_HEARTBEAT_INT_MS, 970 BGE_APE_HOST_HEARTBEAT_INT_DISABLE); 971 APE_WRITE_4(sc, BGE_APE_HOST_DRVR_STATE, 972 BGE_APE_HOST_DRVR_STATE_START); 973 event = BGE_APE_EVENT_STATUS_STATE_START; 974 break; 975 case BGE_RESET_SHUTDOWN: 976 APE_WRITE_4(sc, BGE_APE_HOST_DRVR_STATE, 977 BGE_APE_HOST_DRVR_STATE_UNLOAD); 978 event = BGE_APE_EVENT_STATUS_STATE_UNLOAD; 979 break; 980 case BGE_RESET_SUSPEND: 981 event = BGE_APE_EVENT_STATUS_STATE_SUSPEND; 982 break; 983 default: 984 return; 985 } 986 987 bge_ape_send_event(sc, event | BGE_APE_EVENT_STATUS_DRIVER_EVNT | 988 BGE_APE_EVENT_STATUS_STATE_CHNGE); 989 } 990 991 /* 992 * Map a single buffer address. 993 */ 994 995 static void 996 bge_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error) 997 { 998 struct bge_dmamap_arg *ctx; 999 1000 if (error) 1001 return; 1002 1003 KASSERT(nseg == 1, ("%s: %d segments returned!", __func__, nseg)); 1004 1005 ctx = arg; 1006 ctx->bge_busaddr = segs->ds_addr; 1007 } 1008 1009 static uint8_t 1010 bge_nvram_getbyte(struct bge_softc *sc, int addr, uint8_t *dest) 1011 { 1012 uint32_t access, byte = 0; 1013 int i; 1014 1015 /* Lock. */ 1016 CSR_WRITE_4(sc, BGE_NVRAM_SWARB, BGE_NVRAMSWARB_SET1); 1017 for (i = 0; i < 8000; i++) { 1018 if (CSR_READ_4(sc, BGE_NVRAM_SWARB) & BGE_NVRAMSWARB_GNT1) 1019 break; 1020 DELAY(20); 1021 } 1022 if (i == 8000) 1023 return (1); 1024 1025 /* Enable access. */ 1026 access = CSR_READ_4(sc, BGE_NVRAM_ACCESS); 1027 CSR_WRITE_4(sc, BGE_NVRAM_ACCESS, access | BGE_NVRAMACC_ENABLE); 1028 1029 CSR_WRITE_4(sc, BGE_NVRAM_ADDR, addr & 0xfffffffc); 1030 CSR_WRITE_4(sc, BGE_NVRAM_CMD, BGE_NVRAM_READCMD); 1031 for (i = 0; i < BGE_TIMEOUT * 10; i++) { 1032 DELAY(10); 1033 if (CSR_READ_4(sc, BGE_NVRAM_CMD) & BGE_NVRAMCMD_DONE) { 1034 DELAY(10); 1035 break; 1036 } 1037 } 1038 1039 if (i == BGE_TIMEOUT * 10) { 1040 if_printf(sc->bge_ifp, "nvram read timed out\n"); 1041 return (1); 1042 } 1043 1044 /* Get result. */ 1045 byte = CSR_READ_4(sc, BGE_NVRAM_RDDATA); 1046 1047 *dest = (bswap32(byte) >> ((addr % 4) * 8)) & 0xFF; 1048 1049 /* Disable access. */ 1050 CSR_WRITE_4(sc, BGE_NVRAM_ACCESS, access); 1051 1052 /* Unlock. */ 1053 CSR_WRITE_4(sc, BGE_NVRAM_SWARB, BGE_NVRAMSWARB_CLR1); 1054 CSR_READ_4(sc, BGE_NVRAM_SWARB); 1055 1056 return (0); 1057 } 1058 1059 /* 1060 * Read a sequence of bytes from NVRAM. 1061 */ 1062 static int 1063 bge_read_nvram(struct bge_softc *sc, caddr_t dest, int off, int cnt) 1064 { 1065 int err = 0, i; 1066 uint8_t byte = 0; 1067 1068 if (sc->bge_asicrev != BGE_ASICREV_BCM5906) 1069 return (1); 1070 1071 for (i = 0; i < cnt; i++) { 1072 err = bge_nvram_getbyte(sc, off + i, &byte); 1073 if (err) 1074 break; 1075 *(dest + i) = byte; 1076 } 1077 1078 return (err ? 1 : 0); 1079 } 1080 1081 /* 1082 * Read a byte of data stored in the EEPROM at address 'addr.' The 1083 * BCM570x supports both the traditional bitbang interface and an 1084 * auto access interface for reading the EEPROM. We use the auto 1085 * access method. 1086 */ 1087 static uint8_t 1088 bge_eeprom_getbyte(struct bge_softc *sc, int addr, uint8_t *dest) 1089 { 1090 int i; 1091 uint32_t byte = 0; 1092 1093 /* 1094 * Enable use of auto EEPROM access so we can avoid 1095 * having to use the bitbang method. 1096 */ 1097 BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_AUTO_EEPROM); 1098 1099 /* Reset the EEPROM, load the clock period. */ 1100 CSR_WRITE_4(sc, BGE_EE_ADDR, 1101 BGE_EEADDR_RESET | BGE_EEHALFCLK(BGE_HALFCLK_384SCL)); 1102 DELAY(20); 1103 1104 /* Issue the read EEPROM command. */ 1105 CSR_WRITE_4(sc, BGE_EE_ADDR, BGE_EE_READCMD | addr); 1106 1107 /* Wait for completion */ 1108 for(i = 0; i < BGE_TIMEOUT * 10; i++) { 1109 DELAY(10); 1110 if (CSR_READ_4(sc, BGE_EE_ADDR) & BGE_EEADDR_DONE) 1111 break; 1112 } 1113 1114 if (i == BGE_TIMEOUT * 10) { 1115 device_printf(sc->bge_dev, "EEPROM read timed out\n"); 1116 return (1); 1117 } 1118 1119 /* Get result. */ 1120 byte = CSR_READ_4(sc, BGE_EE_DATA); 1121 1122 *dest = (byte >> ((addr % 4) * 8)) & 0xFF; 1123 1124 return (0); 1125 } 1126 1127 /* 1128 * Read a sequence of bytes from the EEPROM. 1129 */ 1130 static int 1131 bge_read_eeprom(struct bge_softc *sc, caddr_t dest, int off, int cnt) 1132 { 1133 int i, error = 0; 1134 uint8_t byte = 0; 1135 1136 for (i = 0; i < cnt; i++) { 1137 error = bge_eeprom_getbyte(sc, off + i, &byte); 1138 if (error) 1139 break; 1140 *(dest + i) = byte; 1141 } 1142 1143 return (error ? 1 : 0); 1144 } 1145 1146 static int 1147 bge_miibus_readreg(device_t dev, int phy, int reg) 1148 { 1149 struct bge_softc *sc; 1150 uint32_t val; 1151 int i; 1152 1153 sc = device_get_softc(dev); 1154 1155 if (bge_ape_lock(sc, sc->bge_phy_ape_lock) != 0) 1156 return (0); 1157 1158 /* Clear the autopoll bit if set, otherwise may trigger PCI errors. */ 1159 if ((sc->bge_mi_mode & BGE_MIMODE_AUTOPOLL) != 0) { 1160 CSR_WRITE_4(sc, BGE_MI_MODE, 1161 sc->bge_mi_mode & ~BGE_MIMODE_AUTOPOLL); 1162 DELAY(80); 1163 } 1164 1165 CSR_WRITE_4(sc, BGE_MI_COMM, BGE_MICMD_READ | BGE_MICOMM_BUSY | 1166 BGE_MIPHY(phy) | BGE_MIREG(reg)); 1167 1168 /* Poll for the PHY register access to complete. */ 1169 for (i = 0; i < BGE_TIMEOUT; i++) { 1170 DELAY(10); 1171 val = CSR_READ_4(sc, BGE_MI_COMM); 1172 if ((val & BGE_MICOMM_BUSY) == 0) { 1173 DELAY(5); 1174 val = CSR_READ_4(sc, BGE_MI_COMM); 1175 break; 1176 } 1177 } 1178 1179 if (i == BGE_TIMEOUT) { 1180 device_printf(sc->bge_dev, 1181 "PHY read timed out (phy %d, reg %d, val 0x%08x)\n", 1182 phy, reg, val); 1183 val = 0; 1184 } 1185 1186 /* Restore the autopoll bit if necessary. */ 1187 if ((sc->bge_mi_mode & BGE_MIMODE_AUTOPOLL) != 0) { 1188 CSR_WRITE_4(sc, BGE_MI_MODE, sc->bge_mi_mode); 1189 DELAY(80); 1190 } 1191 1192 bge_ape_unlock(sc, sc->bge_phy_ape_lock); 1193 1194 if (val & BGE_MICOMM_READFAIL) 1195 return (0); 1196 1197 return (val & 0xFFFF); 1198 } 1199 1200 static int 1201 bge_miibus_writereg(device_t dev, int phy, int reg, int val) 1202 { 1203 struct bge_softc *sc; 1204 int i; 1205 1206 sc = device_get_softc(dev); 1207 1208 if (sc->bge_asicrev == BGE_ASICREV_BCM5906 && 1209 (reg == BRGPHY_MII_1000CTL || reg == BRGPHY_MII_AUXCTL)) 1210 return (0); 1211 1212 if (bge_ape_lock(sc, sc->bge_phy_ape_lock) != 0) 1213 return (0); 1214 1215 /* Clear the autopoll bit if set, otherwise may trigger PCI errors. */ 1216 if ((sc->bge_mi_mode & BGE_MIMODE_AUTOPOLL) != 0) { 1217 CSR_WRITE_4(sc, BGE_MI_MODE, 1218 sc->bge_mi_mode & ~BGE_MIMODE_AUTOPOLL); 1219 DELAY(80); 1220 } 1221 1222 CSR_WRITE_4(sc, BGE_MI_COMM, BGE_MICMD_WRITE | BGE_MICOMM_BUSY | 1223 BGE_MIPHY(phy) | BGE_MIREG(reg) | val); 1224 1225 for (i = 0; i < BGE_TIMEOUT; i++) { 1226 DELAY(10); 1227 if (!(CSR_READ_4(sc, BGE_MI_COMM) & BGE_MICOMM_BUSY)) { 1228 DELAY(5); 1229 CSR_READ_4(sc, BGE_MI_COMM); /* dummy read */ 1230 break; 1231 } 1232 } 1233 1234 /* Restore the autopoll bit if necessary. */ 1235 if ((sc->bge_mi_mode & BGE_MIMODE_AUTOPOLL) != 0) { 1236 CSR_WRITE_4(sc, BGE_MI_MODE, sc->bge_mi_mode); 1237 DELAY(80); 1238 } 1239 1240 bge_ape_unlock(sc, sc->bge_phy_ape_lock); 1241 1242 if (i == BGE_TIMEOUT) 1243 device_printf(sc->bge_dev, 1244 "PHY write timed out (phy %d, reg %d, val 0x%04x)\n", 1245 phy, reg, val); 1246 1247 return (0); 1248 } 1249 1250 static void 1251 bge_miibus_statchg(device_t dev) 1252 { 1253 struct bge_softc *sc; 1254 struct mii_data *mii; 1255 uint32_t mac_mode, rx_mode, tx_mode; 1256 1257 sc = device_get_softc(dev); 1258 if ((if_getdrvflags(sc->bge_ifp) & IFF_DRV_RUNNING) == 0) 1259 return; 1260 mii = device_get_softc(sc->bge_miibus); 1261 1262 if ((mii->mii_media_status & (IFM_ACTIVE | IFM_AVALID)) == 1263 (IFM_ACTIVE | IFM_AVALID)) { 1264 switch (IFM_SUBTYPE(mii->mii_media_active)) { 1265 case IFM_10_T: 1266 case IFM_100_TX: 1267 sc->bge_link = 1; 1268 break; 1269 case IFM_1000_T: 1270 case IFM_1000_SX: 1271 case IFM_2500_SX: 1272 if (sc->bge_asicrev != BGE_ASICREV_BCM5906) 1273 sc->bge_link = 1; 1274 else 1275 sc->bge_link = 0; 1276 break; 1277 default: 1278 sc->bge_link = 0; 1279 break; 1280 } 1281 } else 1282 sc->bge_link = 0; 1283 if (sc->bge_link == 0) 1284 return; 1285 1286 /* 1287 * APE firmware touches these registers to keep the MAC 1288 * connected to the outside world. Try to keep the 1289 * accesses atomic. 1290 */ 1291 1292 /* Set the port mode (MII/GMII) to match the link speed. */ 1293 mac_mode = CSR_READ_4(sc, BGE_MAC_MODE) & 1294 ~(BGE_MACMODE_PORTMODE | BGE_MACMODE_HALF_DUPLEX); 1295 tx_mode = CSR_READ_4(sc, BGE_TX_MODE); 1296 rx_mode = CSR_READ_4(sc, BGE_RX_MODE); 1297 1298 if (IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_T || 1299 IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_SX) 1300 mac_mode |= BGE_PORTMODE_GMII; 1301 else 1302 mac_mode |= BGE_PORTMODE_MII; 1303 1304 /* Set MAC flow control behavior to match link flow control settings. */ 1305 tx_mode &= ~BGE_TXMODE_FLOWCTL_ENABLE; 1306 rx_mode &= ~BGE_RXMODE_FLOWCTL_ENABLE; 1307 if ((IFM_OPTIONS(mii->mii_media_active) & IFM_FDX) != 0) { 1308 if ((IFM_OPTIONS(mii->mii_media_active) & IFM_ETH_TXPAUSE) != 0) 1309 tx_mode |= BGE_TXMODE_FLOWCTL_ENABLE; 1310 if ((IFM_OPTIONS(mii->mii_media_active) & IFM_ETH_RXPAUSE) != 0) 1311 rx_mode |= BGE_RXMODE_FLOWCTL_ENABLE; 1312 } else 1313 mac_mode |= BGE_MACMODE_HALF_DUPLEX; 1314 1315 CSR_WRITE_4(sc, BGE_MAC_MODE, mac_mode); 1316 DELAY(40); 1317 CSR_WRITE_4(sc, BGE_TX_MODE, tx_mode); 1318 CSR_WRITE_4(sc, BGE_RX_MODE, rx_mode); 1319 } 1320 1321 /* 1322 * Intialize a standard receive ring descriptor. 1323 */ 1324 static int 1325 bge_newbuf_std(struct bge_softc *sc, int i) 1326 { 1327 struct mbuf *m; 1328 struct bge_rx_bd *r; 1329 bus_dma_segment_t segs[1]; 1330 bus_dmamap_t map; 1331 int error, nsegs; 1332 1333 if (sc->bge_flags & BGE_FLAG_JUMBO_STD && 1334 (if_getmtu(sc->bge_ifp) + ETHER_HDR_LEN + ETHER_CRC_LEN + 1335 ETHER_VLAN_ENCAP_LEN > (MCLBYTES - ETHER_ALIGN))) { 1336 m = m_getjcl(M_NOWAIT, MT_DATA, M_PKTHDR, MJUM9BYTES); 1337 if (m == NULL) 1338 return (ENOBUFS); 1339 m->m_len = m->m_pkthdr.len = MJUM9BYTES; 1340 } else { 1341 m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); 1342 if (m == NULL) 1343 return (ENOBUFS); 1344 m->m_len = m->m_pkthdr.len = MCLBYTES; 1345 } 1346 if ((sc->bge_flags & BGE_FLAG_RX_ALIGNBUG) == 0) 1347 m_adj(m, ETHER_ALIGN); 1348 1349 error = bus_dmamap_load_mbuf_sg(sc->bge_cdata.bge_rx_mtag, 1350 sc->bge_cdata.bge_rx_std_sparemap, m, segs, &nsegs, 0); 1351 if (error != 0) { 1352 m_freem(m); 1353 return (error); 1354 } 1355 if (sc->bge_cdata.bge_rx_std_chain[i] != NULL) { 1356 bus_dmamap_sync(sc->bge_cdata.bge_rx_mtag, 1357 sc->bge_cdata.bge_rx_std_dmamap[i], BUS_DMASYNC_POSTREAD); 1358 bus_dmamap_unload(sc->bge_cdata.bge_rx_mtag, 1359 sc->bge_cdata.bge_rx_std_dmamap[i]); 1360 } 1361 map = sc->bge_cdata.bge_rx_std_dmamap[i]; 1362 sc->bge_cdata.bge_rx_std_dmamap[i] = sc->bge_cdata.bge_rx_std_sparemap; 1363 sc->bge_cdata.bge_rx_std_sparemap = map; 1364 sc->bge_cdata.bge_rx_std_chain[i] = m; 1365 sc->bge_cdata.bge_rx_std_seglen[i] = segs[0].ds_len; 1366 r = &sc->bge_ldata.bge_rx_std_ring[sc->bge_std]; 1367 r->bge_addr.bge_addr_lo = BGE_ADDR_LO(segs[0].ds_addr); 1368 r->bge_addr.bge_addr_hi = BGE_ADDR_HI(segs[0].ds_addr); 1369 r->bge_flags = BGE_RXBDFLAG_END; 1370 r->bge_len = segs[0].ds_len; 1371 r->bge_idx = i; 1372 1373 bus_dmamap_sync(sc->bge_cdata.bge_rx_mtag, 1374 sc->bge_cdata.bge_rx_std_dmamap[i], BUS_DMASYNC_PREREAD); 1375 1376 return (0); 1377 } 1378 1379 /* 1380 * Initialize a jumbo receive ring descriptor. This allocates 1381 * a jumbo buffer from the pool managed internally by the driver. 1382 */ 1383 static int 1384 bge_newbuf_jumbo(struct bge_softc *sc, int i) 1385 { 1386 bus_dma_segment_t segs[BGE_NSEG_JUMBO]; 1387 bus_dmamap_t map; 1388 struct bge_extrx_bd *r; 1389 struct mbuf *m; 1390 int error, nsegs; 1391 1392 MGETHDR(m, M_NOWAIT, MT_DATA); 1393 if (m == NULL) 1394 return (ENOBUFS); 1395 1396 if (m_cljget(m, M_NOWAIT, MJUM9BYTES) == NULL) { 1397 m_freem(m); 1398 return (ENOBUFS); 1399 } 1400 m->m_len = m->m_pkthdr.len = MJUM9BYTES; 1401 if ((sc->bge_flags & BGE_FLAG_RX_ALIGNBUG) == 0) 1402 m_adj(m, ETHER_ALIGN); 1403 1404 error = bus_dmamap_load_mbuf_sg(sc->bge_cdata.bge_mtag_jumbo, 1405 sc->bge_cdata.bge_rx_jumbo_sparemap, m, segs, &nsegs, 0); 1406 if (error != 0) { 1407 m_freem(m); 1408 return (error); 1409 } 1410 1411 if (sc->bge_cdata.bge_rx_jumbo_chain[i] != NULL) { 1412 bus_dmamap_sync(sc->bge_cdata.bge_mtag_jumbo, 1413 sc->bge_cdata.bge_rx_jumbo_dmamap[i], BUS_DMASYNC_POSTREAD); 1414 bus_dmamap_unload(sc->bge_cdata.bge_mtag_jumbo, 1415 sc->bge_cdata.bge_rx_jumbo_dmamap[i]); 1416 } 1417 map = sc->bge_cdata.bge_rx_jumbo_dmamap[i]; 1418 sc->bge_cdata.bge_rx_jumbo_dmamap[i] = 1419 sc->bge_cdata.bge_rx_jumbo_sparemap; 1420 sc->bge_cdata.bge_rx_jumbo_sparemap = map; 1421 sc->bge_cdata.bge_rx_jumbo_chain[i] = m; 1422 sc->bge_cdata.bge_rx_jumbo_seglen[i][0] = 0; 1423 sc->bge_cdata.bge_rx_jumbo_seglen[i][1] = 0; 1424 sc->bge_cdata.bge_rx_jumbo_seglen[i][2] = 0; 1425 sc->bge_cdata.bge_rx_jumbo_seglen[i][3] = 0; 1426 1427 /* 1428 * Fill in the extended RX buffer descriptor. 1429 */ 1430 r = &sc->bge_ldata.bge_rx_jumbo_ring[sc->bge_jumbo]; 1431 r->bge_flags = BGE_RXBDFLAG_JUMBO_RING | BGE_RXBDFLAG_END; 1432 r->bge_idx = i; 1433 r->bge_len3 = r->bge_len2 = r->bge_len1 = 0; 1434 switch (nsegs) { 1435 case 4: 1436 r->bge_addr3.bge_addr_lo = BGE_ADDR_LO(segs[3].ds_addr); 1437 r->bge_addr3.bge_addr_hi = BGE_ADDR_HI(segs[3].ds_addr); 1438 r->bge_len3 = segs[3].ds_len; 1439 sc->bge_cdata.bge_rx_jumbo_seglen[i][3] = segs[3].ds_len; 1440 case 3: 1441 r->bge_addr2.bge_addr_lo = BGE_ADDR_LO(segs[2].ds_addr); 1442 r->bge_addr2.bge_addr_hi = BGE_ADDR_HI(segs[2].ds_addr); 1443 r->bge_len2 = segs[2].ds_len; 1444 sc->bge_cdata.bge_rx_jumbo_seglen[i][2] = segs[2].ds_len; 1445 case 2: 1446 r->bge_addr1.bge_addr_lo = BGE_ADDR_LO(segs[1].ds_addr); 1447 r->bge_addr1.bge_addr_hi = BGE_ADDR_HI(segs[1].ds_addr); 1448 r->bge_len1 = segs[1].ds_len; 1449 sc->bge_cdata.bge_rx_jumbo_seglen[i][1] = segs[1].ds_len; 1450 case 1: 1451 r->bge_addr0.bge_addr_lo = BGE_ADDR_LO(segs[0].ds_addr); 1452 r->bge_addr0.bge_addr_hi = BGE_ADDR_HI(segs[0].ds_addr); 1453 r->bge_len0 = segs[0].ds_len; 1454 sc->bge_cdata.bge_rx_jumbo_seglen[i][0] = segs[0].ds_len; 1455 break; 1456 default: 1457 panic("%s: %d segments\n", __func__, nsegs); 1458 } 1459 1460 bus_dmamap_sync(sc->bge_cdata.bge_mtag_jumbo, 1461 sc->bge_cdata.bge_rx_jumbo_dmamap[i], BUS_DMASYNC_PREREAD); 1462 1463 return (0); 1464 } 1465 1466 static int 1467 bge_init_rx_ring_std(struct bge_softc *sc) 1468 { 1469 int error, i; 1470 1471 bzero(sc->bge_ldata.bge_rx_std_ring, BGE_STD_RX_RING_SZ); 1472 sc->bge_std = 0; 1473 for (i = 0; i < BGE_STD_RX_RING_CNT; i++) { 1474 if ((error = bge_newbuf_std(sc, i)) != 0) 1475 return (error); 1476 BGE_INC(sc->bge_std, BGE_STD_RX_RING_CNT); 1477 } 1478 1479 bus_dmamap_sync(sc->bge_cdata.bge_rx_std_ring_tag, 1480 sc->bge_cdata.bge_rx_std_ring_map, BUS_DMASYNC_PREWRITE); 1481 1482 sc->bge_std = 0; 1483 bge_writembx(sc, BGE_MBX_RX_STD_PROD_LO, BGE_STD_RX_RING_CNT - 1); 1484 1485 return (0); 1486 } 1487 1488 static void 1489 bge_free_rx_ring_std(struct bge_softc *sc) 1490 { 1491 int i; 1492 1493 for (i = 0; i < BGE_STD_RX_RING_CNT; i++) { 1494 if (sc->bge_cdata.bge_rx_std_chain[i] != NULL) { 1495 bus_dmamap_sync(sc->bge_cdata.bge_rx_mtag, 1496 sc->bge_cdata.bge_rx_std_dmamap[i], 1497 BUS_DMASYNC_POSTREAD); 1498 bus_dmamap_unload(sc->bge_cdata.bge_rx_mtag, 1499 sc->bge_cdata.bge_rx_std_dmamap[i]); 1500 m_freem(sc->bge_cdata.bge_rx_std_chain[i]); 1501 sc->bge_cdata.bge_rx_std_chain[i] = NULL; 1502 } 1503 bzero((char *)&sc->bge_ldata.bge_rx_std_ring[i], 1504 sizeof(struct bge_rx_bd)); 1505 } 1506 } 1507 1508 static int 1509 bge_init_rx_ring_jumbo(struct bge_softc *sc) 1510 { 1511 struct bge_rcb *rcb; 1512 int error, i; 1513 1514 bzero(sc->bge_ldata.bge_rx_jumbo_ring, BGE_JUMBO_RX_RING_SZ); 1515 sc->bge_jumbo = 0; 1516 for (i = 0; i < BGE_JUMBO_RX_RING_CNT; i++) { 1517 if ((error = bge_newbuf_jumbo(sc, i)) != 0) 1518 return (error); 1519 BGE_INC(sc->bge_jumbo, BGE_JUMBO_RX_RING_CNT); 1520 } 1521 1522 bus_dmamap_sync(sc->bge_cdata.bge_rx_jumbo_ring_tag, 1523 sc->bge_cdata.bge_rx_jumbo_ring_map, BUS_DMASYNC_PREWRITE); 1524 1525 sc->bge_jumbo = 0; 1526 1527 /* Enable the jumbo receive producer ring. */ 1528 rcb = &sc->bge_ldata.bge_info.bge_jumbo_rx_rcb; 1529 rcb->bge_maxlen_flags = 1530 BGE_RCB_MAXLEN_FLAGS(0, BGE_RCB_FLAG_USE_EXT_RX_BD); 1531 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_MAXLEN_FLAGS, rcb->bge_maxlen_flags); 1532 1533 bge_writembx(sc, BGE_MBX_RX_JUMBO_PROD_LO, BGE_JUMBO_RX_RING_CNT - 1); 1534 1535 return (0); 1536 } 1537 1538 static void 1539 bge_free_rx_ring_jumbo(struct bge_softc *sc) 1540 { 1541 int i; 1542 1543 for (i = 0; i < BGE_JUMBO_RX_RING_CNT; i++) { 1544 if (sc->bge_cdata.bge_rx_jumbo_chain[i] != NULL) { 1545 bus_dmamap_sync(sc->bge_cdata.bge_mtag_jumbo, 1546 sc->bge_cdata.bge_rx_jumbo_dmamap[i], 1547 BUS_DMASYNC_POSTREAD); 1548 bus_dmamap_unload(sc->bge_cdata.bge_mtag_jumbo, 1549 sc->bge_cdata.bge_rx_jumbo_dmamap[i]); 1550 m_freem(sc->bge_cdata.bge_rx_jumbo_chain[i]); 1551 sc->bge_cdata.bge_rx_jumbo_chain[i] = NULL; 1552 } 1553 bzero((char *)&sc->bge_ldata.bge_rx_jumbo_ring[i], 1554 sizeof(struct bge_extrx_bd)); 1555 } 1556 } 1557 1558 static void 1559 bge_free_tx_ring(struct bge_softc *sc) 1560 { 1561 int i; 1562 1563 if (sc->bge_ldata.bge_tx_ring == NULL) 1564 return; 1565 1566 for (i = 0; i < BGE_TX_RING_CNT; i++) { 1567 if (sc->bge_cdata.bge_tx_chain[i] != NULL) { 1568 bus_dmamap_sync(sc->bge_cdata.bge_tx_mtag, 1569 sc->bge_cdata.bge_tx_dmamap[i], 1570 BUS_DMASYNC_POSTWRITE); 1571 bus_dmamap_unload(sc->bge_cdata.bge_tx_mtag, 1572 sc->bge_cdata.bge_tx_dmamap[i]); 1573 m_freem(sc->bge_cdata.bge_tx_chain[i]); 1574 sc->bge_cdata.bge_tx_chain[i] = NULL; 1575 } 1576 bzero((char *)&sc->bge_ldata.bge_tx_ring[i], 1577 sizeof(struct bge_tx_bd)); 1578 } 1579 } 1580 1581 static int 1582 bge_init_tx_ring(struct bge_softc *sc) 1583 { 1584 sc->bge_txcnt = 0; 1585 sc->bge_tx_saved_considx = 0; 1586 1587 bzero(sc->bge_ldata.bge_tx_ring, BGE_TX_RING_SZ); 1588 bus_dmamap_sync(sc->bge_cdata.bge_tx_ring_tag, 1589 sc->bge_cdata.bge_tx_ring_map, BUS_DMASYNC_PREWRITE); 1590 1591 /* Initialize transmit producer index for host-memory send ring. */ 1592 sc->bge_tx_prodidx = 0; 1593 bge_writembx(sc, BGE_MBX_TX_HOST_PROD0_LO, sc->bge_tx_prodidx); 1594 1595 /* 5700 b2 errata */ 1596 if (sc->bge_chiprev == BGE_CHIPREV_5700_BX) 1597 bge_writembx(sc, BGE_MBX_TX_HOST_PROD0_LO, sc->bge_tx_prodidx); 1598 1599 /* NIC-memory send ring not used; initialize to zero. */ 1600 bge_writembx(sc, BGE_MBX_TX_NIC_PROD0_LO, 0); 1601 /* 5700 b2 errata */ 1602 if (sc->bge_chiprev == BGE_CHIPREV_5700_BX) 1603 bge_writembx(sc, BGE_MBX_TX_NIC_PROD0_LO, 0); 1604 1605 return (0); 1606 } 1607 1608 static void 1609 bge_setpromisc(struct bge_softc *sc) 1610 { 1611 if_t ifp; 1612 1613 BGE_LOCK_ASSERT(sc); 1614 1615 ifp = sc->bge_ifp; 1616 1617 /* Enable or disable promiscuous mode as needed. */ 1618 if (if_getflags(ifp) & IFF_PROMISC) 1619 BGE_SETBIT(sc, BGE_RX_MODE, BGE_RXMODE_RX_PROMISC); 1620 else 1621 BGE_CLRBIT(sc, BGE_RX_MODE, BGE_RXMODE_RX_PROMISC); 1622 } 1623 1624 static u_int 1625 bge_hash_maddr(void *arg, struct sockaddr_dl *sdl, u_int cnt) 1626 { 1627 uint32_t *hashes = arg; 1628 int h; 1629 1630 h = ether_crc32_le(LLADDR(sdl), ETHER_ADDR_LEN) & 0x7F; 1631 hashes[(h & 0x60) >> 5] |= 1 << (h & 0x1F); 1632 1633 return (1); 1634 } 1635 1636 static void 1637 bge_setmulti(struct bge_softc *sc) 1638 { 1639 if_t ifp; 1640 uint32_t hashes[4] = { 0, 0, 0, 0 }; 1641 int i; 1642 1643 BGE_LOCK_ASSERT(sc); 1644 1645 ifp = sc->bge_ifp; 1646 1647 if (if_getflags(ifp) & IFF_ALLMULTI || if_getflags(ifp) & IFF_PROMISC) { 1648 for (i = 0; i < 4; i++) 1649 CSR_WRITE_4(sc, BGE_MAR0 + (i * 4), 0xFFFFFFFF); 1650 return; 1651 } 1652 1653 /* First, zot all the existing filters. */ 1654 for (i = 0; i < 4; i++) 1655 CSR_WRITE_4(sc, BGE_MAR0 + (i * 4), 0); 1656 1657 if_foreach_llmaddr(ifp, bge_hash_maddr, hashes); 1658 1659 for (i = 0; i < 4; i++) 1660 CSR_WRITE_4(sc, BGE_MAR0 + (i * 4), hashes[i]); 1661 } 1662 1663 static void 1664 bge_setvlan(struct bge_softc *sc) 1665 { 1666 if_t ifp; 1667 1668 BGE_LOCK_ASSERT(sc); 1669 1670 ifp = sc->bge_ifp; 1671 1672 /* Enable or disable VLAN tag stripping as needed. */ 1673 if (if_getcapenable(ifp) & IFCAP_VLAN_HWTAGGING) 1674 BGE_CLRBIT(sc, BGE_RX_MODE, BGE_RXMODE_RX_KEEP_VLAN_DIAG); 1675 else 1676 BGE_SETBIT(sc, BGE_RX_MODE, BGE_RXMODE_RX_KEEP_VLAN_DIAG); 1677 } 1678 1679 static void 1680 bge_sig_pre_reset(struct bge_softc *sc, int type) 1681 { 1682 1683 /* 1684 * Some chips don't like this so only do this if ASF is enabled 1685 */ 1686 if (sc->bge_asf_mode) 1687 bge_writemem_ind(sc, BGE_SRAM_FW_MB, BGE_SRAM_FW_MB_MAGIC); 1688 1689 if (sc->bge_asf_mode & ASF_NEW_HANDSHAKE) { 1690 switch (type) { 1691 case BGE_RESET_START: 1692 bge_writemem_ind(sc, BGE_SRAM_FW_DRV_STATE_MB, 1693 BGE_FW_DRV_STATE_START); 1694 break; 1695 case BGE_RESET_SHUTDOWN: 1696 bge_writemem_ind(sc, BGE_SRAM_FW_DRV_STATE_MB, 1697 BGE_FW_DRV_STATE_UNLOAD); 1698 break; 1699 case BGE_RESET_SUSPEND: 1700 bge_writemem_ind(sc, BGE_SRAM_FW_DRV_STATE_MB, 1701 BGE_FW_DRV_STATE_SUSPEND); 1702 break; 1703 } 1704 } 1705 1706 if (type == BGE_RESET_START || type == BGE_RESET_SUSPEND) 1707 bge_ape_driver_state_change(sc, type); 1708 } 1709 1710 static void 1711 bge_sig_post_reset(struct bge_softc *sc, int type) 1712 { 1713 1714 if (sc->bge_asf_mode & ASF_NEW_HANDSHAKE) { 1715 switch (type) { 1716 case BGE_RESET_START: 1717 bge_writemem_ind(sc, BGE_SRAM_FW_DRV_STATE_MB, 1718 BGE_FW_DRV_STATE_START_DONE); 1719 /* START DONE */ 1720 break; 1721 case BGE_RESET_SHUTDOWN: 1722 bge_writemem_ind(sc, BGE_SRAM_FW_DRV_STATE_MB, 1723 BGE_FW_DRV_STATE_UNLOAD_DONE); 1724 break; 1725 } 1726 } 1727 if (type == BGE_RESET_SHUTDOWN) 1728 bge_ape_driver_state_change(sc, type); 1729 } 1730 1731 static void 1732 bge_sig_legacy(struct bge_softc *sc, int type) 1733 { 1734 1735 if (sc->bge_asf_mode) { 1736 switch (type) { 1737 case BGE_RESET_START: 1738 bge_writemem_ind(sc, BGE_SRAM_FW_DRV_STATE_MB, 1739 BGE_FW_DRV_STATE_START); 1740 break; 1741 case BGE_RESET_SHUTDOWN: 1742 bge_writemem_ind(sc, BGE_SRAM_FW_DRV_STATE_MB, 1743 BGE_FW_DRV_STATE_UNLOAD); 1744 break; 1745 } 1746 } 1747 } 1748 1749 static void 1750 bge_stop_fw(struct bge_softc *sc) 1751 { 1752 int i; 1753 1754 if (sc->bge_asf_mode) { 1755 bge_writemem_ind(sc, BGE_SRAM_FW_CMD_MB, BGE_FW_CMD_PAUSE); 1756 CSR_WRITE_4(sc, BGE_RX_CPU_EVENT, 1757 CSR_READ_4(sc, BGE_RX_CPU_EVENT) | BGE_RX_CPU_DRV_EVENT); 1758 1759 for (i = 0; i < 100; i++ ) { 1760 if (!(CSR_READ_4(sc, BGE_RX_CPU_EVENT) & 1761 BGE_RX_CPU_DRV_EVENT)) 1762 break; 1763 DELAY(10); 1764 } 1765 } 1766 } 1767 1768 static uint32_t 1769 bge_dma_swap_options(struct bge_softc *sc) 1770 { 1771 uint32_t dma_options; 1772 1773 dma_options = BGE_MODECTL_WORDSWAP_NONFRAME | 1774 BGE_MODECTL_BYTESWAP_DATA | BGE_MODECTL_WORDSWAP_DATA; 1775 #if BYTE_ORDER == BIG_ENDIAN 1776 dma_options |= BGE_MODECTL_BYTESWAP_NONFRAME; 1777 #endif 1778 return (dma_options); 1779 } 1780 1781 /* 1782 * Do endian, PCI and DMA initialization. 1783 */ 1784 static int 1785 bge_chipinit(struct bge_softc *sc) 1786 { 1787 uint32_t dma_rw_ctl, misc_ctl, mode_ctl; 1788 uint16_t val; 1789 int i; 1790 1791 /* Set endianness before we access any non-PCI registers. */ 1792 misc_ctl = BGE_INIT; 1793 if (sc->bge_flags & BGE_FLAG_TAGGED_STATUS) 1794 misc_ctl |= BGE_PCIMISCCTL_TAGGED_STATUS; 1795 pci_write_config(sc->bge_dev, BGE_PCI_MISC_CTL, misc_ctl, 4); 1796 1797 /* 1798 * Clear the MAC statistics block in the NIC's 1799 * internal memory. 1800 */ 1801 for (i = BGE_STATS_BLOCK; 1802 i < BGE_STATS_BLOCK_END + 1; i += sizeof(uint32_t)) 1803 BGE_MEMWIN_WRITE(sc, i, 0); 1804 1805 for (i = BGE_STATUS_BLOCK; 1806 i < BGE_STATUS_BLOCK_END + 1; i += sizeof(uint32_t)) 1807 BGE_MEMWIN_WRITE(sc, i, 0); 1808 1809 if (sc->bge_chiprev == BGE_CHIPREV_5704_BX) { 1810 /* 1811 * Fix data corruption caused by non-qword write with WB. 1812 * Fix master abort in PCI mode. 1813 * Fix PCI latency timer. 1814 */ 1815 val = pci_read_config(sc->bge_dev, BGE_PCI_MSI_DATA + 2, 2); 1816 val |= (1 << 10) | (1 << 12) | (1 << 13); 1817 pci_write_config(sc->bge_dev, BGE_PCI_MSI_DATA + 2, val, 2); 1818 } 1819 1820 if (sc->bge_asicrev == BGE_ASICREV_BCM57765 || 1821 sc->bge_asicrev == BGE_ASICREV_BCM57766) { 1822 /* 1823 * For the 57766 and non Ax versions of 57765, bootcode 1824 * needs to setup the PCIE Fast Training Sequence (FTS) 1825 * value to prevent transmit hangs. 1826 */ 1827 if (sc->bge_chiprev != BGE_CHIPREV_57765_AX) { 1828 CSR_WRITE_4(sc, BGE_CPMU_PADRNG_CTL, 1829 CSR_READ_4(sc, BGE_CPMU_PADRNG_CTL) | 1830 BGE_CPMU_PADRNG_CTL_RDIV2); 1831 } 1832 } 1833 1834 /* 1835 * Set up the PCI DMA control register. 1836 */ 1837 dma_rw_ctl = BGE_PCIDMARWCTL_RD_CMD_SHIFT(6) | 1838 BGE_PCIDMARWCTL_WR_CMD_SHIFT(7); 1839 if (sc->bge_flags & BGE_FLAG_PCIE) { 1840 if (sc->bge_mps >= 256) 1841 dma_rw_ctl |= BGE_PCIDMARWCTL_WR_WAT_SHIFT(7); 1842 else 1843 dma_rw_ctl |= BGE_PCIDMARWCTL_WR_WAT_SHIFT(3); 1844 } else if (sc->bge_flags & BGE_FLAG_PCIX) { 1845 if (BGE_IS_5714_FAMILY(sc)) { 1846 /* 256 bytes for read and write. */ 1847 dma_rw_ctl |= BGE_PCIDMARWCTL_RD_WAT_SHIFT(2) | 1848 BGE_PCIDMARWCTL_WR_WAT_SHIFT(2); 1849 dma_rw_ctl |= (sc->bge_asicrev == BGE_ASICREV_BCM5780) ? 1850 BGE_PCIDMARWCTL_ONEDMA_ATONCE_GLOBAL : 1851 BGE_PCIDMARWCTL_ONEDMA_ATONCE_LOCAL; 1852 } else if (sc->bge_asicrev == BGE_ASICREV_BCM5703) { 1853 /* 1854 * In the BCM5703, the DMA read watermark should 1855 * be set to less than or equal to the maximum 1856 * memory read byte count of the PCI-X command 1857 * register. 1858 */ 1859 dma_rw_ctl |= BGE_PCIDMARWCTL_RD_WAT_SHIFT(4) | 1860 BGE_PCIDMARWCTL_WR_WAT_SHIFT(3); 1861 } else if (sc->bge_asicrev == BGE_ASICREV_BCM5704) { 1862 /* 1536 bytes for read, 384 bytes for write. */ 1863 dma_rw_ctl |= BGE_PCIDMARWCTL_RD_WAT_SHIFT(7) | 1864 BGE_PCIDMARWCTL_WR_WAT_SHIFT(3); 1865 } else { 1866 /* 384 bytes for read and write. */ 1867 dma_rw_ctl |= BGE_PCIDMARWCTL_RD_WAT_SHIFT(3) | 1868 BGE_PCIDMARWCTL_WR_WAT_SHIFT(3) | 1869 0x0F; 1870 } 1871 if (sc->bge_asicrev == BGE_ASICREV_BCM5703 || 1872 sc->bge_asicrev == BGE_ASICREV_BCM5704) { 1873 uint32_t tmp; 1874 1875 /* Set ONE_DMA_AT_ONCE for hardware workaround. */ 1876 tmp = CSR_READ_4(sc, BGE_PCI_CLKCTL) & 0x1F; 1877 if (tmp == 6 || tmp == 7) 1878 dma_rw_ctl |= 1879 BGE_PCIDMARWCTL_ONEDMA_ATONCE_GLOBAL; 1880 1881 /* Set PCI-X DMA write workaround. */ 1882 dma_rw_ctl |= BGE_PCIDMARWCTL_ASRT_ALL_BE; 1883 } 1884 } else { 1885 /* Conventional PCI bus: 256 bytes for read and write. */ 1886 dma_rw_ctl |= BGE_PCIDMARWCTL_RD_WAT_SHIFT(7) | 1887 BGE_PCIDMARWCTL_WR_WAT_SHIFT(7); 1888 1889 if (sc->bge_asicrev != BGE_ASICREV_BCM5705 && 1890 sc->bge_asicrev != BGE_ASICREV_BCM5750) 1891 dma_rw_ctl |= 0x0F; 1892 } 1893 if (sc->bge_asicrev == BGE_ASICREV_BCM5700 || 1894 sc->bge_asicrev == BGE_ASICREV_BCM5701) 1895 dma_rw_ctl |= BGE_PCIDMARWCTL_USE_MRM | 1896 BGE_PCIDMARWCTL_ASRT_ALL_BE; 1897 if (sc->bge_asicrev == BGE_ASICREV_BCM5703 || 1898 sc->bge_asicrev == BGE_ASICREV_BCM5704) 1899 dma_rw_ctl &= ~BGE_PCIDMARWCTL_MINDMA; 1900 if (BGE_IS_5717_PLUS(sc)) { 1901 dma_rw_ctl &= ~BGE_PCIDMARWCTL_DIS_CACHE_ALIGNMENT; 1902 if (sc->bge_chipid == BGE_CHIPID_BCM57765_A0) 1903 dma_rw_ctl &= ~BGE_PCIDMARWCTL_CRDRDR_RDMA_MRRS_MSK; 1904 /* 1905 * Enable HW workaround for controllers that misinterpret 1906 * a status tag update and leave interrupts permanently 1907 * disabled. 1908 */ 1909 if (!BGE_IS_57765_PLUS(sc) && 1910 sc->bge_asicrev != BGE_ASICREV_BCM5717 && 1911 sc->bge_asicrev != BGE_ASICREV_BCM5762) 1912 dma_rw_ctl |= BGE_PCIDMARWCTL_TAGGED_STATUS_WA; 1913 } 1914 pci_write_config(sc->bge_dev, BGE_PCI_DMA_RW_CTL, dma_rw_ctl, 4); 1915 1916 /* 1917 * Set up general mode register. 1918 */ 1919 mode_ctl = bge_dma_swap_options(sc); 1920 if (sc->bge_asicrev == BGE_ASICREV_BCM5720 || 1921 sc->bge_asicrev == BGE_ASICREV_BCM5762) { 1922 /* Retain Host-2-BMC settings written by APE firmware. */ 1923 mode_ctl |= CSR_READ_4(sc, BGE_MODE_CTL) & 1924 (BGE_MODECTL_BYTESWAP_B2HRX_DATA | 1925 BGE_MODECTL_WORDSWAP_B2HRX_DATA | 1926 BGE_MODECTL_B2HRX_ENABLE | BGE_MODECTL_HTX2B_ENABLE); 1927 } 1928 mode_ctl |= BGE_MODECTL_MAC_ATTN_INTR | BGE_MODECTL_HOST_SEND_BDS | 1929 BGE_MODECTL_TX_NO_PHDR_CSUM; 1930 1931 /* 1932 * BCM5701 B5 have a bug causing data corruption when using 1933 * 64-bit DMA reads, which can be terminated early and then 1934 * completed later as 32-bit accesses, in combination with 1935 * certain bridges. 1936 */ 1937 if (sc->bge_asicrev == BGE_ASICREV_BCM5701 && 1938 sc->bge_chipid == BGE_CHIPID_BCM5701_B5) 1939 mode_ctl |= BGE_MODECTL_FORCE_PCI32; 1940 1941 /* 1942 * Tell the firmware the driver is running 1943 */ 1944 if (sc->bge_asf_mode & ASF_STACKUP) 1945 mode_ctl |= BGE_MODECTL_STACKUP; 1946 1947 CSR_WRITE_4(sc, BGE_MODE_CTL, mode_ctl); 1948 1949 /* 1950 * Disable memory write invalidate. Apparently it is not supported 1951 * properly by these devices. 1952 */ 1953 PCI_CLRBIT(sc->bge_dev, BGE_PCI_CMD, PCIM_CMD_MWIEN, 4); 1954 1955 /* Set the timer prescaler (always 66 MHz). */ 1956 CSR_WRITE_4(sc, BGE_MISC_CFG, BGE_32BITTIME_66MHZ); 1957 1958 /* XXX: The Linux tg3 driver does this at the start of brgphy_reset. */ 1959 if (sc->bge_asicrev == BGE_ASICREV_BCM5906) { 1960 DELAY(40); /* XXX */ 1961 1962 /* Put PHY into ready state */ 1963 BGE_CLRBIT(sc, BGE_MISC_CFG, BGE_MISCCFG_EPHY_IDDQ); 1964 CSR_READ_4(sc, BGE_MISC_CFG); /* Flush */ 1965 DELAY(40); 1966 } 1967 1968 return (0); 1969 } 1970 1971 static int 1972 bge_blockinit(struct bge_softc *sc) 1973 { 1974 struct bge_rcb *rcb; 1975 bus_size_t vrcb; 1976 bge_hostaddr taddr; 1977 uint32_t dmactl, rdmareg, val; 1978 int i, limit; 1979 1980 /* 1981 * Initialize the memory window pointer register so that 1982 * we can access the first 32K of internal NIC RAM. This will 1983 * allow us to set up the TX send ring RCBs and the RX return 1984 * ring RCBs, plus other things which live in NIC memory. 1985 */ 1986 CSR_WRITE_4(sc, BGE_PCI_MEMWIN_BASEADDR, 0); 1987 1988 /* Note: the BCM5704 has a smaller mbuf space than other chips. */ 1989 1990 if (!(BGE_IS_5705_PLUS(sc))) { 1991 /* Configure mbuf memory pool */ 1992 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_BASEADDR, BGE_BUFFPOOL_1); 1993 if (sc->bge_asicrev == BGE_ASICREV_BCM5704) 1994 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_LEN, 0x10000); 1995 else 1996 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_LEN, 0x18000); 1997 1998 /* Configure DMA resource pool */ 1999 CSR_WRITE_4(sc, BGE_BMAN_DMA_DESCPOOL_BASEADDR, 2000 BGE_DMA_DESCRIPTORS); 2001 CSR_WRITE_4(sc, BGE_BMAN_DMA_DESCPOOL_LEN, 0x2000); 2002 } 2003 2004 /* Configure mbuf pool watermarks */ 2005 if (BGE_IS_5717_PLUS(sc)) { 2006 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_READDMA_LOWAT, 0x0); 2007 if (if_getmtu(sc->bge_ifp) > ETHERMTU) { 2008 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x7e); 2009 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_HIWAT, 0xea); 2010 } else { 2011 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x2a); 2012 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_HIWAT, 0xa0); 2013 } 2014 } else if (!BGE_IS_5705_PLUS(sc)) { 2015 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_READDMA_LOWAT, 0x50); 2016 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x20); 2017 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_HIWAT, 0x60); 2018 } else if (sc->bge_asicrev == BGE_ASICREV_BCM5906) { 2019 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_READDMA_LOWAT, 0x0); 2020 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x04); 2021 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_HIWAT, 0x10); 2022 } else { 2023 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_READDMA_LOWAT, 0x0); 2024 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x10); 2025 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_HIWAT, 0x60); 2026 } 2027 2028 /* Configure DMA resource watermarks */ 2029 CSR_WRITE_4(sc, BGE_BMAN_DMA_DESCPOOL_LOWAT, 5); 2030 CSR_WRITE_4(sc, BGE_BMAN_DMA_DESCPOOL_HIWAT, 10); 2031 2032 /* Enable buffer manager */ 2033 val = BGE_BMANMODE_ENABLE | BGE_BMANMODE_LOMBUF_ATTN; 2034 /* 2035 * Change the arbitration algorithm of TXMBUF read request to 2036 * round-robin instead of priority based for BCM5719. When 2037 * TXFIFO is almost empty, RDMA will hold its request until 2038 * TXFIFO is not almost empty. 2039 */ 2040 if (sc->bge_asicrev == BGE_ASICREV_BCM5719) 2041 val |= BGE_BMANMODE_NO_TX_UNDERRUN; 2042 CSR_WRITE_4(sc, BGE_BMAN_MODE, val); 2043 2044 /* Poll for buffer manager start indication */ 2045 for (i = 0; i < BGE_TIMEOUT; i++) { 2046 DELAY(10); 2047 if (CSR_READ_4(sc, BGE_BMAN_MODE) & BGE_BMANMODE_ENABLE) 2048 break; 2049 } 2050 2051 if (i == BGE_TIMEOUT) { 2052 device_printf(sc->bge_dev, "buffer manager failed to start\n"); 2053 return (ENXIO); 2054 } 2055 2056 /* Enable flow-through queues */ 2057 CSR_WRITE_4(sc, BGE_FTQ_RESET, 0xFFFFFFFF); 2058 CSR_WRITE_4(sc, BGE_FTQ_RESET, 0); 2059 2060 /* Wait until queue initialization is complete */ 2061 for (i = 0; i < BGE_TIMEOUT; i++) { 2062 DELAY(10); 2063 if (CSR_READ_4(sc, BGE_FTQ_RESET) == 0) 2064 break; 2065 } 2066 2067 if (i == BGE_TIMEOUT) { 2068 device_printf(sc->bge_dev, "flow-through queue init failed\n"); 2069 return (ENXIO); 2070 } 2071 2072 /* 2073 * Summary of rings supported by the controller: 2074 * 2075 * Standard Receive Producer Ring 2076 * - This ring is used to feed receive buffers for "standard" 2077 * sized frames (typically 1536 bytes) to the controller. 2078 * 2079 * Jumbo Receive Producer Ring 2080 * - This ring is used to feed receive buffers for jumbo sized 2081 * frames (i.e. anything bigger than the "standard" frames) 2082 * to the controller. 2083 * 2084 * Mini Receive Producer Ring 2085 * - This ring is used to feed receive buffers for "mini" 2086 * sized frames to the controller. 2087 * - This feature required external memory for the controller 2088 * but was never used in a production system. Should always 2089 * be disabled. 2090 * 2091 * Receive Return Ring 2092 * - After the controller has placed an incoming frame into a 2093 * receive buffer that buffer is moved into a receive return 2094 * ring. The driver is then responsible to passing the 2095 * buffer up to the stack. Many versions of the controller 2096 * support multiple RR rings. 2097 * 2098 * Send Ring 2099 * - This ring is used for outgoing frames. Many versions of 2100 * the controller support multiple send rings. 2101 */ 2102 2103 /* Initialize the standard receive producer ring control block. */ 2104 rcb = &sc->bge_ldata.bge_info.bge_std_rx_rcb; 2105 rcb->bge_hostaddr.bge_addr_lo = 2106 BGE_ADDR_LO(sc->bge_ldata.bge_rx_std_ring_paddr); 2107 rcb->bge_hostaddr.bge_addr_hi = 2108 BGE_ADDR_HI(sc->bge_ldata.bge_rx_std_ring_paddr); 2109 bus_dmamap_sync(sc->bge_cdata.bge_rx_std_ring_tag, 2110 sc->bge_cdata.bge_rx_std_ring_map, BUS_DMASYNC_PREREAD); 2111 if (BGE_IS_5717_PLUS(sc)) { 2112 /* 2113 * Bits 31-16: Programmable ring size (2048, 1024, 512, .., 32) 2114 * Bits 15-2 : Maximum RX frame size 2115 * Bit 1 : 1 = Ring Disabled, 0 = Ring ENabled 2116 * Bit 0 : Reserved 2117 */ 2118 rcb->bge_maxlen_flags = 2119 BGE_RCB_MAXLEN_FLAGS(512, BGE_MAX_FRAMELEN << 2); 2120 } else if (BGE_IS_5705_PLUS(sc)) { 2121 /* 2122 * Bits 31-16: Programmable ring size (512, 256, 128, 64, 32) 2123 * Bits 15-2 : Reserved (should be 0) 2124 * Bit 1 : 1 = Ring Disabled, 0 = Ring Enabled 2125 * Bit 0 : Reserved 2126 */ 2127 rcb->bge_maxlen_flags = BGE_RCB_MAXLEN_FLAGS(512, 0); 2128 } else { 2129 /* 2130 * Ring size is always XXX entries 2131 * Bits 31-16: Maximum RX frame size 2132 * Bits 15-2 : Reserved (should be 0) 2133 * Bit 1 : 1 = Ring Disabled, 0 = Ring Enabled 2134 * Bit 0 : Reserved 2135 */ 2136 rcb->bge_maxlen_flags = 2137 BGE_RCB_MAXLEN_FLAGS(BGE_MAX_FRAMELEN, 0); 2138 } 2139 if (sc->bge_asicrev == BGE_ASICREV_BCM5717 || 2140 sc->bge_asicrev == BGE_ASICREV_BCM5719 || 2141 sc->bge_asicrev == BGE_ASICREV_BCM5720) 2142 rcb->bge_nicaddr = BGE_STD_RX_RINGS_5717; 2143 else 2144 rcb->bge_nicaddr = BGE_STD_RX_RINGS; 2145 /* Write the standard receive producer ring control block. */ 2146 CSR_WRITE_4(sc, BGE_RX_STD_RCB_HADDR_HI, rcb->bge_hostaddr.bge_addr_hi); 2147 CSR_WRITE_4(sc, BGE_RX_STD_RCB_HADDR_LO, rcb->bge_hostaddr.bge_addr_lo); 2148 CSR_WRITE_4(sc, BGE_RX_STD_RCB_MAXLEN_FLAGS, rcb->bge_maxlen_flags); 2149 CSR_WRITE_4(sc, BGE_RX_STD_RCB_NICADDR, rcb->bge_nicaddr); 2150 2151 /* Reset the standard receive producer ring producer index. */ 2152 bge_writembx(sc, BGE_MBX_RX_STD_PROD_LO, 0); 2153 2154 /* 2155 * Initialize the jumbo RX producer ring control 2156 * block. We set the 'ring disabled' bit in the 2157 * flags field until we're actually ready to start 2158 * using this ring (i.e. once we set the MTU 2159 * high enough to require it). 2160 */ 2161 if (BGE_IS_JUMBO_CAPABLE(sc)) { 2162 rcb = &sc->bge_ldata.bge_info.bge_jumbo_rx_rcb; 2163 /* Get the jumbo receive producer ring RCB parameters. */ 2164 rcb->bge_hostaddr.bge_addr_lo = 2165 BGE_ADDR_LO(sc->bge_ldata.bge_rx_jumbo_ring_paddr); 2166 rcb->bge_hostaddr.bge_addr_hi = 2167 BGE_ADDR_HI(sc->bge_ldata.bge_rx_jumbo_ring_paddr); 2168 bus_dmamap_sync(sc->bge_cdata.bge_rx_jumbo_ring_tag, 2169 sc->bge_cdata.bge_rx_jumbo_ring_map, 2170 BUS_DMASYNC_PREREAD); 2171 rcb->bge_maxlen_flags = BGE_RCB_MAXLEN_FLAGS(0, 2172 BGE_RCB_FLAG_USE_EXT_RX_BD | BGE_RCB_FLAG_RING_DISABLED); 2173 if (sc->bge_asicrev == BGE_ASICREV_BCM5717 || 2174 sc->bge_asicrev == BGE_ASICREV_BCM5719 || 2175 sc->bge_asicrev == BGE_ASICREV_BCM5720) 2176 rcb->bge_nicaddr = BGE_JUMBO_RX_RINGS_5717; 2177 else 2178 rcb->bge_nicaddr = BGE_JUMBO_RX_RINGS; 2179 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_HADDR_HI, 2180 rcb->bge_hostaddr.bge_addr_hi); 2181 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_HADDR_LO, 2182 rcb->bge_hostaddr.bge_addr_lo); 2183 /* Program the jumbo receive producer ring RCB parameters. */ 2184 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_MAXLEN_FLAGS, 2185 rcb->bge_maxlen_flags); 2186 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_NICADDR, rcb->bge_nicaddr); 2187 /* Reset the jumbo receive producer ring producer index. */ 2188 bge_writembx(sc, BGE_MBX_RX_JUMBO_PROD_LO, 0); 2189 } 2190 2191 /* Disable the mini receive producer ring RCB. */ 2192 if (BGE_IS_5700_FAMILY(sc)) { 2193 rcb = &sc->bge_ldata.bge_info.bge_mini_rx_rcb; 2194 rcb->bge_maxlen_flags = 2195 BGE_RCB_MAXLEN_FLAGS(0, BGE_RCB_FLAG_RING_DISABLED); 2196 CSR_WRITE_4(sc, BGE_RX_MINI_RCB_MAXLEN_FLAGS, 2197 rcb->bge_maxlen_flags); 2198 /* Reset the mini receive producer ring producer index. */ 2199 bge_writembx(sc, BGE_MBX_RX_MINI_PROD_LO, 0); 2200 } 2201 2202 /* Choose de-pipeline mode for BCM5906 A0, A1 and A2. */ 2203 if (sc->bge_asicrev == BGE_ASICREV_BCM5906) { 2204 if (sc->bge_chipid == BGE_CHIPID_BCM5906_A0 || 2205 sc->bge_chipid == BGE_CHIPID_BCM5906_A1 || 2206 sc->bge_chipid == BGE_CHIPID_BCM5906_A2) 2207 CSR_WRITE_4(sc, BGE_ISO_PKT_TX, 2208 (CSR_READ_4(sc, BGE_ISO_PKT_TX) & ~3) | 2); 2209 } 2210 /* 2211 * The BD ring replenish thresholds control how often the 2212 * hardware fetches new BD's from the producer rings in host 2213 * memory. Setting the value too low on a busy system can 2214 * starve the hardware and recue the throughpout. 2215 * 2216 * Set the BD ring replentish thresholds. The recommended 2217 * values are 1/8th the number of descriptors allocated to 2218 * each ring. 2219 * XXX The 5754 requires a lower threshold, so it might be a 2220 * requirement of all 575x family chips. The Linux driver sets 2221 * the lower threshold for all 5705 family chips as well, but there 2222 * are reports that it might not need to be so strict. 2223 * 2224 * XXX Linux does some extra fiddling here for the 5906 parts as 2225 * well. 2226 */ 2227 if (BGE_IS_5705_PLUS(sc)) 2228 val = 8; 2229 else 2230 val = BGE_STD_RX_RING_CNT / 8; 2231 CSR_WRITE_4(sc, BGE_RBDI_STD_REPL_THRESH, val); 2232 if (BGE_IS_JUMBO_CAPABLE(sc)) 2233 CSR_WRITE_4(sc, BGE_RBDI_JUMBO_REPL_THRESH, 2234 BGE_JUMBO_RX_RING_CNT/8); 2235 if (BGE_IS_5717_PLUS(sc)) { 2236 CSR_WRITE_4(sc, BGE_STD_REPLENISH_LWM, 32); 2237 CSR_WRITE_4(sc, BGE_JMB_REPLENISH_LWM, 16); 2238 } 2239 2240 /* 2241 * Disable all send rings by setting the 'ring disabled' bit 2242 * in the flags field of all the TX send ring control blocks, 2243 * located in NIC memory. 2244 */ 2245 if (!BGE_IS_5705_PLUS(sc)) 2246 /* 5700 to 5704 had 16 send rings. */ 2247 limit = BGE_TX_RINGS_EXTSSRAM_MAX; 2248 else if (BGE_IS_57765_PLUS(sc) || 2249 sc->bge_asicrev == BGE_ASICREV_BCM5762) 2250 limit = 2; 2251 else if (BGE_IS_5717_PLUS(sc)) 2252 limit = 4; 2253 else 2254 limit = 1; 2255 vrcb = BGE_MEMWIN_START + BGE_SEND_RING_RCB; 2256 for (i = 0; i < limit; i++) { 2257 RCB_WRITE_4(sc, vrcb, bge_maxlen_flags, 2258 BGE_RCB_MAXLEN_FLAGS(0, BGE_RCB_FLAG_RING_DISABLED)); 2259 RCB_WRITE_4(sc, vrcb, bge_nicaddr, 0); 2260 vrcb += sizeof(struct bge_rcb); 2261 } 2262 2263 /* Configure send ring RCB 0 (we use only the first ring) */ 2264 vrcb = BGE_MEMWIN_START + BGE_SEND_RING_RCB; 2265 BGE_HOSTADDR(taddr, sc->bge_ldata.bge_tx_ring_paddr); 2266 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_hi, taddr.bge_addr_hi); 2267 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_lo, taddr.bge_addr_lo); 2268 if (sc->bge_asicrev == BGE_ASICREV_BCM5717 || 2269 sc->bge_asicrev == BGE_ASICREV_BCM5719 || 2270 sc->bge_asicrev == BGE_ASICREV_BCM5720) 2271 RCB_WRITE_4(sc, vrcb, bge_nicaddr, BGE_SEND_RING_5717); 2272 else 2273 RCB_WRITE_4(sc, vrcb, bge_nicaddr, 2274 BGE_NIC_TXRING_ADDR(0, BGE_TX_RING_CNT)); 2275 RCB_WRITE_4(sc, vrcb, bge_maxlen_flags, 2276 BGE_RCB_MAXLEN_FLAGS(BGE_TX_RING_CNT, 0)); 2277 2278 /* 2279 * Disable all receive return rings by setting the 2280 * 'ring diabled' bit in the flags field of all the receive 2281 * return ring control blocks, located in NIC memory. 2282 */ 2283 if (sc->bge_asicrev == BGE_ASICREV_BCM5717 || 2284 sc->bge_asicrev == BGE_ASICREV_BCM5719 || 2285 sc->bge_asicrev == BGE_ASICREV_BCM5720) { 2286 /* Should be 17, use 16 until we get an SRAM map. */ 2287 limit = 16; 2288 } else if (!BGE_IS_5705_PLUS(sc)) 2289 limit = BGE_RX_RINGS_MAX; 2290 else if (sc->bge_asicrev == BGE_ASICREV_BCM5755 || 2291 sc->bge_asicrev == BGE_ASICREV_BCM5762 || 2292 BGE_IS_57765_PLUS(sc)) 2293 limit = 4; 2294 else 2295 limit = 1; 2296 /* Disable all receive return rings. */ 2297 vrcb = BGE_MEMWIN_START + BGE_RX_RETURN_RING_RCB; 2298 for (i = 0; i < limit; i++) { 2299 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_hi, 0); 2300 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_lo, 0); 2301 RCB_WRITE_4(sc, vrcb, bge_maxlen_flags, 2302 BGE_RCB_FLAG_RING_DISABLED); 2303 RCB_WRITE_4(sc, vrcb, bge_nicaddr, 0); 2304 bge_writembx(sc, BGE_MBX_RX_CONS0_LO + 2305 (i * (sizeof(uint64_t))), 0); 2306 vrcb += sizeof(struct bge_rcb); 2307 } 2308 2309 /* 2310 * Set up receive return ring 0. Note that the NIC address 2311 * for RX return rings is 0x0. The return rings live entirely 2312 * within the host, so the nicaddr field in the RCB isn't used. 2313 */ 2314 vrcb = BGE_MEMWIN_START + BGE_RX_RETURN_RING_RCB; 2315 BGE_HOSTADDR(taddr, sc->bge_ldata.bge_rx_return_ring_paddr); 2316 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_hi, taddr.bge_addr_hi); 2317 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_lo, taddr.bge_addr_lo); 2318 RCB_WRITE_4(sc, vrcb, bge_nicaddr, 0); 2319 RCB_WRITE_4(sc, vrcb, bge_maxlen_flags, 2320 BGE_RCB_MAXLEN_FLAGS(sc->bge_return_ring_cnt, 0)); 2321 2322 /* Set random backoff seed for TX */ 2323 CSR_WRITE_4(sc, BGE_TX_RANDOM_BACKOFF, 2324 (IF_LLADDR(sc->bge_ifp)[0] + IF_LLADDR(sc->bge_ifp)[1] + 2325 IF_LLADDR(sc->bge_ifp)[2] + IF_LLADDR(sc->bge_ifp)[3] + 2326 IF_LLADDR(sc->bge_ifp)[4] + IF_LLADDR(sc->bge_ifp)[5]) & 2327 BGE_TX_BACKOFF_SEED_MASK); 2328 2329 /* Set inter-packet gap */ 2330 val = 0x2620; 2331 if (sc->bge_asicrev == BGE_ASICREV_BCM5720 || 2332 sc->bge_asicrev == BGE_ASICREV_BCM5762) 2333 val |= CSR_READ_4(sc, BGE_TX_LENGTHS) & 2334 (BGE_TXLEN_JMB_FRM_LEN_MSK | BGE_TXLEN_CNT_DN_VAL_MSK); 2335 CSR_WRITE_4(sc, BGE_TX_LENGTHS, val); 2336 2337 /* 2338 * Specify which ring to use for packets that don't match 2339 * any RX rules. 2340 */ 2341 CSR_WRITE_4(sc, BGE_RX_RULES_CFG, 0x08); 2342 2343 /* 2344 * Configure number of RX lists. One interrupt distribution 2345 * list, sixteen active lists, one bad frames class. 2346 */ 2347 CSR_WRITE_4(sc, BGE_RXLP_CFG, 0x181); 2348 2349 /* Inialize RX list placement stats mask. */ 2350 CSR_WRITE_4(sc, BGE_RXLP_STATS_ENABLE_MASK, 0x007FFFFF); 2351 CSR_WRITE_4(sc, BGE_RXLP_STATS_CTL, 0x1); 2352 2353 /* Disable host coalescing until we get it set up */ 2354 CSR_WRITE_4(sc, BGE_HCC_MODE, 0x00000000); 2355 2356 /* Poll to make sure it's shut down. */ 2357 for (i = 0; i < BGE_TIMEOUT; i++) { 2358 DELAY(10); 2359 if (!(CSR_READ_4(sc, BGE_HCC_MODE) & BGE_HCCMODE_ENABLE)) 2360 break; 2361 } 2362 2363 if (i == BGE_TIMEOUT) { 2364 device_printf(sc->bge_dev, 2365 "host coalescing engine failed to idle\n"); 2366 return (ENXIO); 2367 } 2368 2369 /* Set up host coalescing defaults */ 2370 CSR_WRITE_4(sc, BGE_HCC_RX_COAL_TICKS, sc->bge_rx_coal_ticks); 2371 CSR_WRITE_4(sc, BGE_HCC_TX_COAL_TICKS, sc->bge_tx_coal_ticks); 2372 CSR_WRITE_4(sc, BGE_HCC_RX_MAX_COAL_BDS, sc->bge_rx_max_coal_bds); 2373 CSR_WRITE_4(sc, BGE_HCC_TX_MAX_COAL_BDS, sc->bge_tx_max_coal_bds); 2374 if (!(BGE_IS_5705_PLUS(sc))) { 2375 CSR_WRITE_4(sc, BGE_HCC_RX_COAL_TICKS_INT, 0); 2376 CSR_WRITE_4(sc, BGE_HCC_TX_COAL_TICKS_INT, 0); 2377 } 2378 CSR_WRITE_4(sc, BGE_HCC_RX_MAX_COAL_BDS_INT, 1); 2379 CSR_WRITE_4(sc, BGE_HCC_TX_MAX_COAL_BDS_INT, 1); 2380 2381 /* Set up address of statistics block */ 2382 if (!(BGE_IS_5705_PLUS(sc))) { 2383 CSR_WRITE_4(sc, BGE_HCC_STATS_ADDR_HI, 2384 BGE_ADDR_HI(sc->bge_ldata.bge_stats_paddr)); 2385 CSR_WRITE_4(sc, BGE_HCC_STATS_ADDR_LO, 2386 BGE_ADDR_LO(sc->bge_ldata.bge_stats_paddr)); 2387 CSR_WRITE_4(sc, BGE_HCC_STATS_BASEADDR, BGE_STATS_BLOCK); 2388 CSR_WRITE_4(sc, BGE_HCC_STATUSBLK_BASEADDR, BGE_STATUS_BLOCK); 2389 CSR_WRITE_4(sc, BGE_HCC_STATS_TICKS, sc->bge_stat_ticks); 2390 } 2391 2392 /* Set up address of status block */ 2393 CSR_WRITE_4(sc, BGE_HCC_STATUSBLK_ADDR_HI, 2394 BGE_ADDR_HI(sc->bge_ldata.bge_status_block_paddr)); 2395 CSR_WRITE_4(sc, BGE_HCC_STATUSBLK_ADDR_LO, 2396 BGE_ADDR_LO(sc->bge_ldata.bge_status_block_paddr)); 2397 2398 /* Set up status block size. */ 2399 if (sc->bge_asicrev == BGE_ASICREV_BCM5700 && 2400 sc->bge_chipid != BGE_CHIPID_BCM5700_C0) { 2401 val = BGE_STATBLKSZ_FULL; 2402 bzero(sc->bge_ldata.bge_status_block, BGE_STATUS_BLK_SZ); 2403 } else { 2404 val = BGE_STATBLKSZ_32BYTE; 2405 bzero(sc->bge_ldata.bge_status_block, 32); 2406 } 2407 bus_dmamap_sync(sc->bge_cdata.bge_status_tag, 2408 sc->bge_cdata.bge_status_map, 2409 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 2410 2411 /* Turn on host coalescing state machine */ 2412 CSR_WRITE_4(sc, BGE_HCC_MODE, val | BGE_HCCMODE_ENABLE); 2413 2414 /* Turn on RX BD completion state machine and enable attentions */ 2415 CSR_WRITE_4(sc, BGE_RBDC_MODE, 2416 BGE_RBDCMODE_ENABLE | BGE_RBDCMODE_ATTN); 2417 2418 /* Turn on RX list placement state machine */ 2419 CSR_WRITE_4(sc, BGE_RXLP_MODE, BGE_RXLPMODE_ENABLE); 2420 2421 /* Turn on RX list selector state machine. */ 2422 if (!(BGE_IS_5705_PLUS(sc))) 2423 CSR_WRITE_4(sc, BGE_RXLS_MODE, BGE_RXLSMODE_ENABLE); 2424 2425 /* Turn on DMA, clear stats. */ 2426 val = BGE_MACMODE_TXDMA_ENB | BGE_MACMODE_RXDMA_ENB | 2427 BGE_MACMODE_RX_STATS_CLEAR | BGE_MACMODE_TX_STATS_CLEAR | 2428 BGE_MACMODE_RX_STATS_ENB | BGE_MACMODE_TX_STATS_ENB | 2429 BGE_MACMODE_FRMHDR_DMA_ENB; 2430 2431 if (sc->bge_flags & BGE_FLAG_TBI) 2432 val |= BGE_PORTMODE_TBI; 2433 else if (sc->bge_flags & BGE_FLAG_MII_SERDES) 2434 val |= BGE_PORTMODE_GMII; 2435 else 2436 val |= BGE_PORTMODE_MII; 2437 2438 /* Allow APE to send/receive frames. */ 2439 if ((sc->bge_mfw_flags & BGE_MFW_ON_APE) != 0) 2440 val |= BGE_MACMODE_APE_RX_EN | BGE_MACMODE_APE_TX_EN; 2441 2442 CSR_WRITE_4(sc, BGE_MAC_MODE, val); 2443 DELAY(40); 2444 2445 /* Set misc. local control, enable interrupts on attentions */ 2446 BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_INTR_ONATTN); 2447 2448 #ifdef notdef 2449 /* Assert GPIO pins for PHY reset */ 2450 BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_MISCIO_OUT0 | 2451 BGE_MLC_MISCIO_OUT1 | BGE_MLC_MISCIO_OUT2); 2452 BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_MISCIO_OUTEN0 | 2453 BGE_MLC_MISCIO_OUTEN1 | BGE_MLC_MISCIO_OUTEN2); 2454 #endif 2455 2456 /* Turn on DMA completion state machine */ 2457 if (!(BGE_IS_5705_PLUS(sc))) 2458 CSR_WRITE_4(sc, BGE_DMAC_MODE, BGE_DMACMODE_ENABLE); 2459 2460 val = BGE_WDMAMODE_ENABLE | BGE_WDMAMODE_ALL_ATTNS; 2461 2462 /* Enable host coalescing bug fix. */ 2463 if (BGE_IS_5755_PLUS(sc)) 2464 val |= BGE_WDMAMODE_STATUS_TAG_FIX; 2465 2466 /* Request larger DMA burst size to get better performance. */ 2467 if (sc->bge_asicrev == BGE_ASICREV_BCM5785) 2468 val |= BGE_WDMAMODE_BURST_ALL_DATA; 2469 2470 /* Turn on write DMA state machine */ 2471 CSR_WRITE_4(sc, BGE_WDMA_MODE, val); 2472 DELAY(40); 2473 2474 /* Turn on read DMA state machine */ 2475 val = BGE_RDMAMODE_ENABLE | BGE_RDMAMODE_ALL_ATTNS; 2476 2477 if (sc->bge_asicrev == BGE_ASICREV_BCM5717) 2478 val |= BGE_RDMAMODE_MULT_DMA_RD_DIS; 2479 2480 if (sc->bge_asicrev == BGE_ASICREV_BCM5784 || 2481 sc->bge_asicrev == BGE_ASICREV_BCM5785 || 2482 sc->bge_asicrev == BGE_ASICREV_BCM57780) 2483 val |= BGE_RDMAMODE_BD_SBD_CRPT_ATTN | 2484 BGE_RDMAMODE_MBUF_RBD_CRPT_ATTN | 2485 BGE_RDMAMODE_MBUF_SBD_CRPT_ATTN; 2486 if (sc->bge_flags & BGE_FLAG_PCIE) 2487 val |= BGE_RDMAMODE_FIFO_LONG_BURST; 2488 if (sc->bge_flags & (BGE_FLAG_TSO | BGE_FLAG_TSO3)) { 2489 val |= BGE_RDMAMODE_TSO4_ENABLE; 2490 if (sc->bge_flags & BGE_FLAG_TSO3 || 2491 sc->bge_asicrev == BGE_ASICREV_BCM5785 || 2492 sc->bge_asicrev == BGE_ASICREV_BCM57780) 2493 val |= BGE_RDMAMODE_TSO6_ENABLE; 2494 } 2495 2496 if (sc->bge_asicrev == BGE_ASICREV_BCM5720 || 2497 sc->bge_asicrev == BGE_ASICREV_BCM5762) { 2498 val |= CSR_READ_4(sc, BGE_RDMA_MODE) & 2499 BGE_RDMAMODE_H2BNC_VLAN_DET; 2500 /* 2501 * Allow multiple outstanding read requests from 2502 * non-LSO read DMA engine. 2503 */ 2504 val &= ~BGE_RDMAMODE_MULT_DMA_RD_DIS; 2505 } 2506 2507 if (sc->bge_asicrev == BGE_ASICREV_BCM5761 || 2508 sc->bge_asicrev == BGE_ASICREV_BCM5784 || 2509 sc->bge_asicrev == BGE_ASICREV_BCM5785 || 2510 sc->bge_asicrev == BGE_ASICREV_BCM57780 || 2511 BGE_IS_5717_PLUS(sc) || BGE_IS_57765_PLUS(sc)) { 2512 if (sc->bge_asicrev == BGE_ASICREV_BCM5762) 2513 rdmareg = BGE_RDMA_RSRVCTRL_REG2; 2514 else 2515 rdmareg = BGE_RDMA_RSRVCTRL; 2516 dmactl = CSR_READ_4(sc, rdmareg); 2517 /* 2518 * Adjust tx margin to prevent TX data corruption and 2519 * fix internal FIFO overflow. 2520 */ 2521 if (sc->bge_chipid == BGE_CHIPID_BCM5719_A0 || 2522 sc->bge_asicrev == BGE_ASICREV_BCM5762) { 2523 dmactl &= ~(BGE_RDMA_RSRVCTRL_FIFO_LWM_MASK | 2524 BGE_RDMA_RSRVCTRL_FIFO_HWM_MASK | 2525 BGE_RDMA_RSRVCTRL_TXMRGN_MASK); 2526 dmactl |= BGE_RDMA_RSRVCTRL_FIFO_LWM_1_5K | 2527 BGE_RDMA_RSRVCTRL_FIFO_HWM_1_5K | 2528 BGE_RDMA_RSRVCTRL_TXMRGN_320B; 2529 } 2530 /* 2531 * Enable fix for read DMA FIFO overruns. 2532 * The fix is to limit the number of RX BDs 2533 * the hardware would fetch at a fime. 2534 */ 2535 CSR_WRITE_4(sc, rdmareg, dmactl | 2536 BGE_RDMA_RSRVCTRL_FIFO_OFLW_FIX); 2537 } 2538 2539 if (sc->bge_asicrev == BGE_ASICREV_BCM5719) { 2540 CSR_WRITE_4(sc, BGE_RDMA_LSO_CRPTEN_CTRL, 2541 CSR_READ_4(sc, BGE_RDMA_LSO_CRPTEN_CTRL) | 2542 BGE_RDMA_LSO_CRPTEN_CTRL_BLEN_BD_4K | 2543 BGE_RDMA_LSO_CRPTEN_CTRL_BLEN_LSO_4K); 2544 } else if (sc->bge_asicrev == BGE_ASICREV_BCM5720) { 2545 /* 2546 * Allow 4KB burst length reads for non-LSO frames. 2547 * Enable 512B burst length reads for buffer descriptors. 2548 */ 2549 CSR_WRITE_4(sc, BGE_RDMA_LSO_CRPTEN_CTRL, 2550 CSR_READ_4(sc, BGE_RDMA_LSO_CRPTEN_CTRL) | 2551 BGE_RDMA_LSO_CRPTEN_CTRL_BLEN_BD_512 | 2552 BGE_RDMA_LSO_CRPTEN_CTRL_BLEN_LSO_4K); 2553 } else if (sc->bge_asicrev == BGE_ASICREV_BCM5762) { 2554 CSR_WRITE_4(sc, BGE_RDMA_LSO_CRPTEN_CTRL_REG2, 2555 CSR_READ_4(sc, BGE_RDMA_LSO_CRPTEN_CTRL_REG2) | 2556 BGE_RDMA_LSO_CRPTEN_CTRL_BLEN_BD_4K | 2557 BGE_RDMA_LSO_CRPTEN_CTRL_BLEN_LSO_4K); 2558 } 2559 2560 CSR_WRITE_4(sc, BGE_RDMA_MODE, val); 2561 DELAY(40); 2562 2563 if (sc->bge_flags & BGE_FLAG_RDMA_BUG) { 2564 for (i = 0; i < BGE_NUM_RDMA_CHANNELS / 2; i++) { 2565 val = CSR_READ_4(sc, BGE_RDMA_LENGTH + i * 4); 2566 if ((val & 0xFFFF) > BGE_FRAMELEN) 2567 break; 2568 if (((val >> 16) & 0xFFFF) > BGE_FRAMELEN) 2569 break; 2570 } 2571 if (i != BGE_NUM_RDMA_CHANNELS / 2) { 2572 val = CSR_READ_4(sc, BGE_RDMA_LSO_CRPTEN_CTRL); 2573 if (sc->bge_asicrev == BGE_ASICREV_BCM5719) 2574 val |= BGE_RDMA_TX_LENGTH_WA_5719; 2575 else 2576 val |= BGE_RDMA_TX_LENGTH_WA_5720; 2577 CSR_WRITE_4(sc, BGE_RDMA_LSO_CRPTEN_CTRL, val); 2578 } 2579 } 2580 2581 /* Turn on RX data completion state machine */ 2582 CSR_WRITE_4(sc, BGE_RDC_MODE, BGE_RDCMODE_ENABLE); 2583 2584 /* Turn on RX BD initiator state machine */ 2585 CSR_WRITE_4(sc, BGE_RBDI_MODE, BGE_RBDIMODE_ENABLE); 2586 2587 /* Turn on RX data and RX BD initiator state machine */ 2588 CSR_WRITE_4(sc, BGE_RDBDI_MODE, BGE_RDBDIMODE_ENABLE); 2589 2590 /* Turn on Mbuf cluster free state machine */ 2591 if (!(BGE_IS_5705_PLUS(sc))) 2592 CSR_WRITE_4(sc, BGE_MBCF_MODE, BGE_MBCFMODE_ENABLE); 2593 2594 /* Turn on send BD completion state machine */ 2595 CSR_WRITE_4(sc, BGE_SBDC_MODE, BGE_SBDCMODE_ENABLE); 2596 2597 /* Turn on send data completion state machine */ 2598 val = BGE_SDCMODE_ENABLE; 2599 if (sc->bge_asicrev == BGE_ASICREV_BCM5761) 2600 val |= BGE_SDCMODE_CDELAY; 2601 CSR_WRITE_4(sc, BGE_SDC_MODE, val); 2602 2603 /* Turn on send data initiator state machine */ 2604 if (sc->bge_flags & (BGE_FLAG_TSO | BGE_FLAG_TSO3)) 2605 CSR_WRITE_4(sc, BGE_SDI_MODE, BGE_SDIMODE_ENABLE | 2606 BGE_SDIMODE_HW_LSO_PRE_DMA); 2607 else 2608 CSR_WRITE_4(sc, BGE_SDI_MODE, BGE_SDIMODE_ENABLE); 2609 2610 /* Turn on send BD initiator state machine */ 2611 CSR_WRITE_4(sc, BGE_SBDI_MODE, BGE_SBDIMODE_ENABLE); 2612 2613 /* Turn on send BD selector state machine */ 2614 CSR_WRITE_4(sc, BGE_SRS_MODE, BGE_SRSMODE_ENABLE); 2615 2616 CSR_WRITE_4(sc, BGE_SDI_STATS_ENABLE_MASK, 0x007FFFFF); 2617 CSR_WRITE_4(sc, BGE_SDI_STATS_CTL, 2618 BGE_SDISTATSCTL_ENABLE | BGE_SDISTATSCTL_FASTER); 2619 2620 /* ack/clear link change events */ 2621 CSR_WRITE_4(sc, BGE_MAC_STS, BGE_MACSTAT_SYNC_CHANGED | 2622 BGE_MACSTAT_CFG_CHANGED | BGE_MACSTAT_MI_COMPLETE | 2623 BGE_MACSTAT_LINK_CHANGED); 2624 CSR_WRITE_4(sc, BGE_MI_STS, 0); 2625 2626 /* 2627 * Enable attention when the link has changed state for 2628 * devices that use auto polling. 2629 */ 2630 if (sc->bge_flags & BGE_FLAG_TBI) { 2631 CSR_WRITE_4(sc, BGE_MI_STS, BGE_MISTS_LINK); 2632 } else { 2633 if (sc->bge_mi_mode & BGE_MIMODE_AUTOPOLL) { 2634 CSR_WRITE_4(sc, BGE_MI_MODE, sc->bge_mi_mode); 2635 DELAY(80); 2636 } 2637 if (sc->bge_asicrev == BGE_ASICREV_BCM5700 && 2638 sc->bge_chipid != BGE_CHIPID_BCM5700_B2) 2639 CSR_WRITE_4(sc, BGE_MAC_EVT_ENB, 2640 BGE_EVTENB_MI_INTERRUPT); 2641 } 2642 2643 /* 2644 * Clear any pending link state attention. 2645 * Otherwise some link state change events may be lost until attention 2646 * is cleared by bge_intr() -> bge_link_upd() sequence. 2647 * It's not necessary on newer BCM chips - perhaps enabling link 2648 * state change attentions implies clearing pending attention. 2649 */ 2650 CSR_WRITE_4(sc, BGE_MAC_STS, BGE_MACSTAT_SYNC_CHANGED | 2651 BGE_MACSTAT_CFG_CHANGED | BGE_MACSTAT_MI_COMPLETE | 2652 BGE_MACSTAT_LINK_CHANGED); 2653 2654 /* Enable link state change attentions. */ 2655 BGE_SETBIT(sc, BGE_MAC_EVT_ENB, BGE_EVTENB_LINK_CHANGED); 2656 2657 return (0); 2658 } 2659 2660 static const struct bge_revision * 2661 bge_lookup_rev(uint32_t chipid) 2662 { 2663 const struct bge_revision *br; 2664 2665 for (br = bge_revisions; br->br_name != NULL; br++) { 2666 if (br->br_chipid == chipid) 2667 return (br); 2668 } 2669 2670 for (br = bge_majorrevs; br->br_name != NULL; br++) { 2671 if (br->br_chipid == BGE_ASICREV(chipid)) 2672 return (br); 2673 } 2674 2675 return (NULL); 2676 } 2677 2678 static const struct bge_vendor * 2679 bge_lookup_vendor(uint16_t vid) 2680 { 2681 const struct bge_vendor *v; 2682 2683 for (v = bge_vendors; v->v_name != NULL; v++) 2684 if (v->v_id == vid) 2685 return (v); 2686 2687 return (NULL); 2688 } 2689 2690 static uint32_t 2691 bge_chipid(device_t dev) 2692 { 2693 uint32_t id; 2694 2695 id = pci_read_config(dev, BGE_PCI_MISC_CTL, 4) >> 2696 BGE_PCIMISCCTL_ASICREV_SHIFT; 2697 if (BGE_ASICREV(id) == BGE_ASICREV_USE_PRODID_REG) { 2698 /* 2699 * Find the ASCI revision. Different chips use different 2700 * registers. 2701 */ 2702 switch (pci_get_device(dev)) { 2703 case BCOM_DEVICEID_BCM5717C: 2704 /* 5717 C0 seems to belong to 5720 line. */ 2705 id = BGE_CHIPID_BCM5720_A0; 2706 break; 2707 case BCOM_DEVICEID_BCM5717: 2708 case BCOM_DEVICEID_BCM5718: 2709 case BCOM_DEVICEID_BCM5719: 2710 case BCOM_DEVICEID_BCM5720: 2711 case BCOM_DEVICEID_BCM5725: 2712 case BCOM_DEVICEID_BCM5727: 2713 case BCOM_DEVICEID_BCM5762: 2714 case BCOM_DEVICEID_BCM57764: 2715 case BCOM_DEVICEID_BCM57767: 2716 case BCOM_DEVICEID_BCM57787: 2717 id = pci_read_config(dev, 2718 BGE_PCI_GEN2_PRODID_ASICREV, 4); 2719 break; 2720 case BCOM_DEVICEID_BCM57761: 2721 case BCOM_DEVICEID_BCM57762: 2722 case BCOM_DEVICEID_BCM57765: 2723 case BCOM_DEVICEID_BCM57766: 2724 case BCOM_DEVICEID_BCM57781: 2725 case BCOM_DEVICEID_BCM57782: 2726 case BCOM_DEVICEID_BCM57785: 2727 case BCOM_DEVICEID_BCM57786: 2728 case BCOM_DEVICEID_BCM57791: 2729 case BCOM_DEVICEID_BCM57795: 2730 id = pci_read_config(dev, 2731 BGE_PCI_GEN15_PRODID_ASICREV, 4); 2732 break; 2733 default: 2734 id = pci_read_config(dev, BGE_PCI_PRODID_ASICREV, 4); 2735 } 2736 } 2737 return (id); 2738 } 2739 2740 /* 2741 * Probe for a Broadcom chip. Check the PCI vendor and device IDs 2742 * against our list and return its name if we find a match. 2743 * 2744 * Note that since the Broadcom controller contains VPD support, we 2745 * try to get the device name string from the controller itself instead 2746 * of the compiled-in string. It guarantees we'll always announce the 2747 * right product name. We fall back to the compiled-in string when 2748 * VPD is unavailable or corrupt. 2749 */ 2750 static int 2751 bge_probe(device_t dev) 2752 { 2753 char buf[96]; 2754 char model[64]; 2755 const struct bge_revision *br; 2756 const char *pname; 2757 struct bge_softc *sc; 2758 const struct bge_type *t = bge_devs; 2759 const struct bge_vendor *v; 2760 uint32_t id; 2761 uint16_t did, vid; 2762 2763 sc = device_get_softc(dev); 2764 sc->bge_dev = dev; 2765 vid = pci_get_vendor(dev); 2766 did = pci_get_device(dev); 2767 while(t->bge_vid != 0) { 2768 if ((vid == t->bge_vid) && (did == t->bge_did)) { 2769 id = bge_chipid(dev); 2770 br = bge_lookup_rev(id); 2771 if (bge_has_eaddr(sc) && 2772 pci_get_vpd_ident(dev, &pname) == 0) 2773 snprintf(model, sizeof(model), "%s", pname); 2774 else { 2775 v = bge_lookup_vendor(vid); 2776 snprintf(model, sizeof(model), "%s %s", 2777 v != NULL ? v->v_name : "Unknown", 2778 br != NULL ? br->br_name : 2779 "NetXtreme/NetLink Ethernet Controller"); 2780 } 2781 snprintf(buf, sizeof(buf), "%s, %sASIC rev. %#08x", 2782 model, br != NULL ? "" : "unknown ", id); 2783 device_set_desc_copy(dev, buf); 2784 return (BUS_PROBE_DEFAULT); 2785 } 2786 t++; 2787 } 2788 2789 return (ENXIO); 2790 } 2791 2792 static void 2793 bge_dma_free(struct bge_softc *sc) 2794 { 2795 int i; 2796 2797 /* Destroy DMA maps for RX buffers. */ 2798 for (i = 0; i < BGE_STD_RX_RING_CNT; i++) { 2799 if (sc->bge_cdata.bge_rx_std_dmamap[i]) 2800 bus_dmamap_destroy(sc->bge_cdata.bge_rx_mtag, 2801 sc->bge_cdata.bge_rx_std_dmamap[i]); 2802 } 2803 if (sc->bge_cdata.bge_rx_std_sparemap) 2804 bus_dmamap_destroy(sc->bge_cdata.bge_rx_mtag, 2805 sc->bge_cdata.bge_rx_std_sparemap); 2806 2807 /* Destroy DMA maps for jumbo RX buffers. */ 2808 for (i = 0; i < BGE_JUMBO_RX_RING_CNT; i++) { 2809 if (sc->bge_cdata.bge_rx_jumbo_dmamap[i]) 2810 bus_dmamap_destroy(sc->bge_cdata.bge_mtag_jumbo, 2811 sc->bge_cdata.bge_rx_jumbo_dmamap[i]); 2812 } 2813 if (sc->bge_cdata.bge_rx_jumbo_sparemap) 2814 bus_dmamap_destroy(sc->bge_cdata.bge_mtag_jumbo, 2815 sc->bge_cdata.bge_rx_jumbo_sparemap); 2816 2817 /* Destroy DMA maps for TX buffers. */ 2818 for (i = 0; i < BGE_TX_RING_CNT; i++) { 2819 if (sc->bge_cdata.bge_tx_dmamap[i]) 2820 bus_dmamap_destroy(sc->bge_cdata.bge_tx_mtag, 2821 sc->bge_cdata.bge_tx_dmamap[i]); 2822 } 2823 2824 if (sc->bge_cdata.bge_rx_mtag) 2825 bus_dma_tag_destroy(sc->bge_cdata.bge_rx_mtag); 2826 if (sc->bge_cdata.bge_mtag_jumbo) 2827 bus_dma_tag_destroy(sc->bge_cdata.bge_mtag_jumbo); 2828 if (sc->bge_cdata.bge_tx_mtag) 2829 bus_dma_tag_destroy(sc->bge_cdata.bge_tx_mtag); 2830 2831 /* Destroy standard RX ring. */ 2832 if (sc->bge_ldata.bge_rx_std_ring_paddr) 2833 bus_dmamap_unload(sc->bge_cdata.bge_rx_std_ring_tag, 2834 sc->bge_cdata.bge_rx_std_ring_map); 2835 if (sc->bge_ldata.bge_rx_std_ring) 2836 bus_dmamem_free(sc->bge_cdata.bge_rx_std_ring_tag, 2837 sc->bge_ldata.bge_rx_std_ring, 2838 sc->bge_cdata.bge_rx_std_ring_map); 2839 2840 if (sc->bge_cdata.bge_rx_std_ring_tag) 2841 bus_dma_tag_destroy(sc->bge_cdata.bge_rx_std_ring_tag); 2842 2843 /* Destroy jumbo RX ring. */ 2844 if (sc->bge_ldata.bge_rx_jumbo_ring_paddr) 2845 bus_dmamap_unload(sc->bge_cdata.bge_rx_jumbo_ring_tag, 2846 sc->bge_cdata.bge_rx_jumbo_ring_map); 2847 2848 if (sc->bge_ldata.bge_rx_jumbo_ring) 2849 bus_dmamem_free(sc->bge_cdata.bge_rx_jumbo_ring_tag, 2850 sc->bge_ldata.bge_rx_jumbo_ring, 2851 sc->bge_cdata.bge_rx_jumbo_ring_map); 2852 2853 if (sc->bge_cdata.bge_rx_jumbo_ring_tag) 2854 bus_dma_tag_destroy(sc->bge_cdata.bge_rx_jumbo_ring_tag); 2855 2856 /* Destroy RX return ring. */ 2857 if (sc->bge_ldata.bge_rx_return_ring_paddr) 2858 bus_dmamap_unload(sc->bge_cdata.bge_rx_return_ring_tag, 2859 sc->bge_cdata.bge_rx_return_ring_map); 2860 2861 if (sc->bge_ldata.bge_rx_return_ring) 2862 bus_dmamem_free(sc->bge_cdata.bge_rx_return_ring_tag, 2863 sc->bge_ldata.bge_rx_return_ring, 2864 sc->bge_cdata.bge_rx_return_ring_map); 2865 2866 if (sc->bge_cdata.bge_rx_return_ring_tag) 2867 bus_dma_tag_destroy(sc->bge_cdata.bge_rx_return_ring_tag); 2868 2869 /* Destroy TX ring. */ 2870 if (sc->bge_ldata.bge_tx_ring_paddr) 2871 bus_dmamap_unload(sc->bge_cdata.bge_tx_ring_tag, 2872 sc->bge_cdata.bge_tx_ring_map); 2873 2874 if (sc->bge_ldata.bge_tx_ring) 2875 bus_dmamem_free(sc->bge_cdata.bge_tx_ring_tag, 2876 sc->bge_ldata.bge_tx_ring, 2877 sc->bge_cdata.bge_tx_ring_map); 2878 2879 if (sc->bge_cdata.bge_tx_ring_tag) 2880 bus_dma_tag_destroy(sc->bge_cdata.bge_tx_ring_tag); 2881 2882 /* Destroy status block. */ 2883 if (sc->bge_ldata.bge_status_block_paddr) 2884 bus_dmamap_unload(sc->bge_cdata.bge_status_tag, 2885 sc->bge_cdata.bge_status_map); 2886 2887 if (sc->bge_ldata.bge_status_block) 2888 bus_dmamem_free(sc->bge_cdata.bge_status_tag, 2889 sc->bge_ldata.bge_status_block, 2890 sc->bge_cdata.bge_status_map); 2891 2892 if (sc->bge_cdata.bge_status_tag) 2893 bus_dma_tag_destroy(sc->bge_cdata.bge_status_tag); 2894 2895 /* Destroy statistics block. */ 2896 if (sc->bge_ldata.bge_stats_paddr) 2897 bus_dmamap_unload(sc->bge_cdata.bge_stats_tag, 2898 sc->bge_cdata.bge_stats_map); 2899 2900 if (sc->bge_ldata.bge_stats) 2901 bus_dmamem_free(sc->bge_cdata.bge_stats_tag, 2902 sc->bge_ldata.bge_stats, 2903 sc->bge_cdata.bge_stats_map); 2904 2905 if (sc->bge_cdata.bge_stats_tag) 2906 bus_dma_tag_destroy(sc->bge_cdata.bge_stats_tag); 2907 2908 if (sc->bge_cdata.bge_buffer_tag) 2909 bus_dma_tag_destroy(sc->bge_cdata.bge_buffer_tag); 2910 2911 /* Destroy the parent tag. */ 2912 if (sc->bge_cdata.bge_parent_tag) 2913 bus_dma_tag_destroy(sc->bge_cdata.bge_parent_tag); 2914 } 2915 2916 static int 2917 bge_dma_ring_alloc(struct bge_softc *sc, bus_size_t alignment, 2918 bus_size_t maxsize, bus_dma_tag_t *tag, uint8_t **ring, bus_dmamap_t *map, 2919 bus_addr_t *paddr, const char *msg) 2920 { 2921 struct bge_dmamap_arg ctx; 2922 bus_addr_t lowaddr; 2923 bus_size_t ring_end; 2924 int error; 2925 2926 lowaddr = BUS_SPACE_MAXADDR; 2927 again: 2928 error = bus_dma_tag_create(sc->bge_cdata.bge_parent_tag, 2929 alignment, 0, lowaddr, BUS_SPACE_MAXADDR, NULL, 2930 NULL, maxsize, 1, maxsize, 0, NULL, NULL, tag); 2931 if (error != 0) { 2932 device_printf(sc->bge_dev, 2933 "could not create %s dma tag\n", msg); 2934 return (ENOMEM); 2935 } 2936 /* Allocate DMA'able memory for ring. */ 2937 error = bus_dmamem_alloc(*tag, (void **)ring, 2938 BUS_DMA_NOWAIT | BUS_DMA_ZERO | BUS_DMA_COHERENT, map); 2939 if (error != 0) { 2940 device_printf(sc->bge_dev, 2941 "could not allocate DMA'able memory for %s\n", msg); 2942 return (ENOMEM); 2943 } 2944 /* Load the address of the ring. */ 2945 ctx.bge_busaddr = 0; 2946 error = bus_dmamap_load(*tag, *map, *ring, maxsize, bge_dma_map_addr, 2947 &ctx, BUS_DMA_NOWAIT); 2948 if (error != 0) { 2949 device_printf(sc->bge_dev, 2950 "could not load DMA'able memory for %s\n", msg); 2951 return (ENOMEM); 2952 } 2953 *paddr = ctx.bge_busaddr; 2954 ring_end = *paddr + maxsize; 2955 if ((sc->bge_flags & BGE_FLAG_4G_BNDRY_BUG) != 0 && 2956 BGE_ADDR_HI(*paddr) != BGE_ADDR_HI(ring_end)) { 2957 /* 2958 * 4GB boundary crossed. Limit maximum allowable DMA 2959 * address space to 32bit and try again. 2960 */ 2961 bus_dmamap_unload(*tag, *map); 2962 bus_dmamem_free(*tag, *ring, *map); 2963 bus_dma_tag_destroy(*tag); 2964 if (bootverbose) 2965 device_printf(sc->bge_dev, "4GB boundary crossed, " 2966 "limit DMA address space to 32bit for %s\n", msg); 2967 *ring = NULL; 2968 *tag = NULL; 2969 *map = NULL; 2970 lowaddr = BUS_SPACE_MAXADDR_32BIT; 2971 goto again; 2972 } 2973 return (0); 2974 } 2975 2976 static int 2977 bge_dma_alloc(struct bge_softc *sc) 2978 { 2979 bus_addr_t lowaddr; 2980 bus_size_t boundary, sbsz, rxmaxsegsz, txsegsz, txmaxsegsz; 2981 int i, error; 2982 2983 lowaddr = BUS_SPACE_MAXADDR; 2984 if ((sc->bge_flags & BGE_FLAG_40BIT_BUG) != 0) 2985 lowaddr = BGE_DMA_MAXADDR; 2986 /* 2987 * Allocate the parent bus DMA tag appropriate for PCI. 2988 */ 2989 error = bus_dma_tag_create(bus_get_dma_tag(sc->bge_dev), 2990 1, 0, lowaddr, BUS_SPACE_MAXADDR, NULL, 2991 NULL, BUS_SPACE_MAXSIZE_32BIT, 0, BUS_SPACE_MAXSIZE_32BIT, 2992 0, NULL, NULL, &sc->bge_cdata.bge_parent_tag); 2993 if (error != 0) { 2994 device_printf(sc->bge_dev, 2995 "could not allocate parent dma tag\n"); 2996 return (ENOMEM); 2997 } 2998 2999 /* Create tag for standard RX ring. */ 3000 error = bge_dma_ring_alloc(sc, PAGE_SIZE, BGE_STD_RX_RING_SZ, 3001 &sc->bge_cdata.bge_rx_std_ring_tag, 3002 (uint8_t **)&sc->bge_ldata.bge_rx_std_ring, 3003 &sc->bge_cdata.bge_rx_std_ring_map, 3004 &sc->bge_ldata.bge_rx_std_ring_paddr, "RX ring"); 3005 if (error) 3006 return (error); 3007 3008 /* Create tag for RX return ring. */ 3009 error = bge_dma_ring_alloc(sc, PAGE_SIZE, BGE_RX_RTN_RING_SZ(sc), 3010 &sc->bge_cdata.bge_rx_return_ring_tag, 3011 (uint8_t **)&sc->bge_ldata.bge_rx_return_ring, 3012 &sc->bge_cdata.bge_rx_return_ring_map, 3013 &sc->bge_ldata.bge_rx_return_ring_paddr, "RX return ring"); 3014 if (error) 3015 return (error); 3016 3017 /* Create tag for TX ring. */ 3018 error = bge_dma_ring_alloc(sc, PAGE_SIZE, BGE_TX_RING_SZ, 3019 &sc->bge_cdata.bge_tx_ring_tag, 3020 (uint8_t **)&sc->bge_ldata.bge_tx_ring, 3021 &sc->bge_cdata.bge_tx_ring_map, 3022 &sc->bge_ldata.bge_tx_ring_paddr, "TX ring"); 3023 if (error) 3024 return (error); 3025 3026 /* 3027 * Create tag for status block. 3028 * Because we only use single Tx/Rx/Rx return ring, use 3029 * minimum status block size except BCM5700 AX/BX which 3030 * seems to want to see full status block size regardless 3031 * of configured number of ring. 3032 */ 3033 if (sc->bge_asicrev == BGE_ASICREV_BCM5700 && 3034 sc->bge_chipid != BGE_CHIPID_BCM5700_C0) 3035 sbsz = BGE_STATUS_BLK_SZ; 3036 else 3037 sbsz = 32; 3038 error = bge_dma_ring_alloc(sc, PAGE_SIZE, sbsz, 3039 &sc->bge_cdata.bge_status_tag, 3040 (uint8_t **)&sc->bge_ldata.bge_status_block, 3041 &sc->bge_cdata.bge_status_map, 3042 &sc->bge_ldata.bge_status_block_paddr, "status block"); 3043 if (error) 3044 return (error); 3045 3046 /* Create tag for statistics block. */ 3047 error = bge_dma_ring_alloc(sc, PAGE_SIZE, BGE_STATS_SZ, 3048 &sc->bge_cdata.bge_stats_tag, 3049 (uint8_t **)&sc->bge_ldata.bge_stats, 3050 &sc->bge_cdata.bge_stats_map, 3051 &sc->bge_ldata.bge_stats_paddr, "statistics block"); 3052 if (error) 3053 return (error); 3054 3055 /* Create tag for jumbo RX ring. */ 3056 if (BGE_IS_JUMBO_CAPABLE(sc)) { 3057 error = bge_dma_ring_alloc(sc, PAGE_SIZE, BGE_JUMBO_RX_RING_SZ, 3058 &sc->bge_cdata.bge_rx_jumbo_ring_tag, 3059 (uint8_t **)&sc->bge_ldata.bge_rx_jumbo_ring, 3060 &sc->bge_cdata.bge_rx_jumbo_ring_map, 3061 &sc->bge_ldata.bge_rx_jumbo_ring_paddr, "jumbo RX ring"); 3062 if (error) 3063 return (error); 3064 } 3065 3066 /* Create parent tag for buffers. */ 3067 boundary = 0; 3068 if ((sc->bge_flags & BGE_FLAG_4G_BNDRY_BUG) != 0) { 3069 boundary = BGE_DMA_BNDRY; 3070 /* 3071 * XXX 3072 * watchdog timeout issue was observed on BCM5704 which 3073 * lives behind PCI-X bridge(e.g AMD 8131 PCI-X bridge). 3074 * Both limiting DMA address space to 32bits and flushing 3075 * mailbox write seem to address the issue. 3076 */ 3077 if (sc->bge_pcixcap != 0) 3078 lowaddr = BUS_SPACE_MAXADDR_32BIT; 3079 } 3080 error = bus_dma_tag_create(bus_get_dma_tag(sc->bge_dev), 3081 1, boundary, lowaddr, BUS_SPACE_MAXADDR, NULL, 3082 NULL, BUS_SPACE_MAXSIZE_32BIT, 0, BUS_SPACE_MAXSIZE_32BIT, 3083 0, NULL, NULL, &sc->bge_cdata.bge_buffer_tag); 3084 if (error != 0) { 3085 device_printf(sc->bge_dev, 3086 "could not allocate buffer dma tag\n"); 3087 return (ENOMEM); 3088 } 3089 /* Create tag for Tx mbufs. */ 3090 if (sc->bge_flags & (BGE_FLAG_TSO | BGE_FLAG_TSO3)) { 3091 txsegsz = BGE_TSOSEG_SZ; 3092 txmaxsegsz = 65535 + sizeof(struct ether_vlan_header); 3093 } else { 3094 txsegsz = MCLBYTES; 3095 txmaxsegsz = MCLBYTES * BGE_NSEG_NEW; 3096 } 3097 error = bus_dma_tag_create(sc->bge_cdata.bge_buffer_tag, 1, 3098 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL, 3099 txmaxsegsz, BGE_NSEG_NEW, txsegsz, 0, NULL, NULL, 3100 &sc->bge_cdata.bge_tx_mtag); 3101 3102 if (error) { 3103 device_printf(sc->bge_dev, "could not allocate TX dma tag\n"); 3104 return (ENOMEM); 3105 } 3106 3107 /* Create tag for Rx mbufs. */ 3108 if (sc->bge_flags & BGE_FLAG_JUMBO_STD) 3109 rxmaxsegsz = MJUM9BYTES; 3110 else 3111 rxmaxsegsz = MCLBYTES; 3112 error = bus_dma_tag_create(sc->bge_cdata.bge_buffer_tag, 1, 0, 3113 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL, rxmaxsegsz, 1, 3114 rxmaxsegsz, 0, NULL, NULL, &sc->bge_cdata.bge_rx_mtag); 3115 3116 if (error) { 3117 device_printf(sc->bge_dev, "could not allocate RX dma tag\n"); 3118 return (ENOMEM); 3119 } 3120 3121 /* Create DMA maps for RX buffers. */ 3122 error = bus_dmamap_create(sc->bge_cdata.bge_rx_mtag, 0, 3123 &sc->bge_cdata.bge_rx_std_sparemap); 3124 if (error) { 3125 device_printf(sc->bge_dev, 3126 "can't create spare DMA map for RX\n"); 3127 return (ENOMEM); 3128 } 3129 for (i = 0; i < BGE_STD_RX_RING_CNT; i++) { 3130 error = bus_dmamap_create(sc->bge_cdata.bge_rx_mtag, 0, 3131 &sc->bge_cdata.bge_rx_std_dmamap[i]); 3132 if (error) { 3133 device_printf(sc->bge_dev, 3134 "can't create DMA map for RX\n"); 3135 return (ENOMEM); 3136 } 3137 } 3138 3139 /* Create DMA maps for TX buffers. */ 3140 for (i = 0; i < BGE_TX_RING_CNT; i++) { 3141 error = bus_dmamap_create(sc->bge_cdata.bge_tx_mtag, 0, 3142 &sc->bge_cdata.bge_tx_dmamap[i]); 3143 if (error) { 3144 device_printf(sc->bge_dev, 3145 "can't create DMA map for TX\n"); 3146 return (ENOMEM); 3147 } 3148 } 3149 3150 /* Create tags for jumbo RX buffers. */ 3151 if (BGE_IS_JUMBO_CAPABLE(sc)) { 3152 error = bus_dma_tag_create(sc->bge_cdata.bge_buffer_tag, 3153 1, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, 3154 NULL, MJUM9BYTES, BGE_NSEG_JUMBO, PAGE_SIZE, 3155 0, NULL, NULL, &sc->bge_cdata.bge_mtag_jumbo); 3156 if (error) { 3157 device_printf(sc->bge_dev, 3158 "could not allocate jumbo dma tag\n"); 3159 return (ENOMEM); 3160 } 3161 /* Create DMA maps for jumbo RX buffers. */ 3162 error = bus_dmamap_create(sc->bge_cdata.bge_mtag_jumbo, 3163 0, &sc->bge_cdata.bge_rx_jumbo_sparemap); 3164 if (error) { 3165 device_printf(sc->bge_dev, 3166 "can't create spare DMA map for jumbo RX\n"); 3167 return (ENOMEM); 3168 } 3169 for (i = 0; i < BGE_JUMBO_RX_RING_CNT; i++) { 3170 error = bus_dmamap_create(sc->bge_cdata.bge_mtag_jumbo, 3171 0, &sc->bge_cdata.bge_rx_jumbo_dmamap[i]); 3172 if (error) { 3173 device_printf(sc->bge_dev, 3174 "can't create DMA map for jumbo RX\n"); 3175 return (ENOMEM); 3176 } 3177 } 3178 } 3179 3180 return (0); 3181 } 3182 3183 /* 3184 * Return true if this device has more than one port. 3185 */ 3186 static int 3187 bge_has_multiple_ports(struct bge_softc *sc) 3188 { 3189 device_t dev = sc->bge_dev; 3190 u_int b, d, f, fscan, s; 3191 3192 d = pci_get_domain(dev); 3193 b = pci_get_bus(dev); 3194 s = pci_get_slot(dev); 3195 f = pci_get_function(dev); 3196 for (fscan = 0; fscan <= PCI_FUNCMAX; fscan++) 3197 if (fscan != f && pci_find_dbsf(d, b, s, fscan) != NULL) 3198 return (1); 3199 return (0); 3200 } 3201 3202 /* 3203 * Return true if MSI can be used with this device. 3204 */ 3205 static int 3206 bge_can_use_msi(struct bge_softc *sc) 3207 { 3208 int can_use_msi = 0; 3209 3210 if (sc->bge_msi == 0) 3211 return (0); 3212 3213 /* Disable MSI for polling(4). */ 3214 #ifdef DEVICE_POLLING 3215 return (0); 3216 #endif 3217 switch (sc->bge_asicrev) { 3218 case BGE_ASICREV_BCM5714_A0: 3219 case BGE_ASICREV_BCM5714: 3220 /* 3221 * Apparently, MSI doesn't work when these chips are 3222 * configured in single-port mode. 3223 */ 3224 if (bge_has_multiple_ports(sc)) 3225 can_use_msi = 1; 3226 break; 3227 case BGE_ASICREV_BCM5750: 3228 if (sc->bge_chiprev != BGE_CHIPREV_5750_AX && 3229 sc->bge_chiprev != BGE_CHIPREV_5750_BX) 3230 can_use_msi = 1; 3231 break; 3232 case BGE_ASICREV_BCM5784: 3233 /* 3234 * Prevent infinite "watchdog timeout" errors 3235 * in some MacBook Pro and make it work out-of-the-box. 3236 */ 3237 if (sc->bge_chiprev == BGE_CHIPREV_5784_AX) 3238 break; 3239 /* FALLTHROUGH */ 3240 default: 3241 if (BGE_IS_575X_PLUS(sc)) 3242 can_use_msi = 1; 3243 } 3244 return (can_use_msi); 3245 } 3246 3247 static int 3248 bge_mbox_reorder(struct bge_softc *sc) 3249 { 3250 /* Lists of PCI bridges that are known to reorder mailbox writes. */ 3251 static const struct mbox_reorder { 3252 const uint16_t vendor; 3253 const uint16_t device; 3254 const char *desc; 3255 } mbox_reorder_lists[] = { 3256 { 0x1022, 0x7450, "AMD-8131 PCI-X Bridge" }, 3257 }; 3258 devclass_t pci, pcib; 3259 device_t bus, dev; 3260 int i; 3261 3262 pci = devclass_find("pci"); 3263 pcib = devclass_find("pcib"); 3264 dev = sc->bge_dev; 3265 bus = device_get_parent(dev); 3266 for (;;) { 3267 dev = device_get_parent(bus); 3268 bus = device_get_parent(dev); 3269 if (device_get_devclass(dev) != pcib) 3270 break; 3271 if (device_get_devclass(bus) != pci) 3272 break; 3273 for (i = 0; i < nitems(mbox_reorder_lists); i++) { 3274 if (pci_get_vendor(dev) == 3275 mbox_reorder_lists[i].vendor && 3276 pci_get_device(dev) == 3277 mbox_reorder_lists[i].device) { 3278 device_printf(sc->bge_dev, 3279 "enabling MBOX workaround for %s\n", 3280 mbox_reorder_lists[i].desc); 3281 return (1); 3282 } 3283 } 3284 } 3285 return (0); 3286 } 3287 3288 static void 3289 bge_devinfo(struct bge_softc *sc) 3290 { 3291 uint32_t cfg, clk; 3292 3293 device_printf(sc->bge_dev, 3294 "CHIP ID 0x%08x; ASIC REV 0x%02x; CHIP REV 0x%02x; ", 3295 sc->bge_chipid, sc->bge_asicrev, sc->bge_chiprev); 3296 if (sc->bge_flags & BGE_FLAG_PCIE) 3297 printf("PCI-E\n"); 3298 else if (sc->bge_flags & BGE_FLAG_PCIX) { 3299 printf("PCI-X "); 3300 cfg = CSR_READ_4(sc, BGE_MISC_CFG) & BGE_MISCCFG_BOARD_ID_MASK; 3301 if (cfg == BGE_MISCCFG_BOARD_ID_5704CIOBE) 3302 clk = 133; 3303 else { 3304 clk = CSR_READ_4(sc, BGE_PCI_CLKCTL) & 0x1F; 3305 switch (clk) { 3306 case 0: 3307 clk = 33; 3308 break; 3309 case 2: 3310 clk = 50; 3311 break; 3312 case 4: 3313 clk = 66; 3314 break; 3315 case 6: 3316 clk = 100; 3317 break; 3318 case 7: 3319 clk = 133; 3320 break; 3321 } 3322 } 3323 printf("%u MHz\n", clk); 3324 } else { 3325 if (sc->bge_pcixcap != 0) 3326 printf("PCI on PCI-X "); 3327 else 3328 printf("PCI "); 3329 cfg = pci_read_config(sc->bge_dev, BGE_PCI_PCISTATE, 4); 3330 if (cfg & BGE_PCISTATE_PCI_BUSSPEED) 3331 clk = 66; 3332 else 3333 clk = 33; 3334 if (cfg & BGE_PCISTATE_32BIT_BUS) 3335 printf("%u MHz; 32bit\n", clk); 3336 else 3337 printf("%u MHz; 64bit\n", clk); 3338 } 3339 } 3340 3341 static int 3342 bge_attach(device_t dev) 3343 { 3344 if_t ifp; 3345 struct bge_softc *sc; 3346 uint32_t hwcfg = 0, misccfg, pcistate; 3347 u_char eaddr[ETHER_ADDR_LEN]; 3348 int capmask, error, reg, rid, trys; 3349 3350 sc = device_get_softc(dev); 3351 sc->bge_dev = dev; 3352 3353 BGE_LOCK_INIT(sc, device_get_nameunit(dev)); 3354 TASK_INIT(&sc->bge_intr_task, 0, bge_intr_task, sc); 3355 callout_init_mtx(&sc->bge_stat_ch, &sc->bge_mtx, 0); 3356 3357 pci_enable_busmaster(dev); 3358 3359 /* 3360 * Allocate control/status registers. 3361 */ 3362 rid = PCIR_BAR(0); 3363 sc->bge_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, 3364 RF_ACTIVE); 3365 3366 if (sc->bge_res == NULL) { 3367 device_printf (sc->bge_dev, "couldn't map BAR0 memory\n"); 3368 error = ENXIO; 3369 goto fail; 3370 } 3371 3372 /* Save various chip information. */ 3373 sc->bge_func_addr = pci_get_function(dev); 3374 sc->bge_chipid = bge_chipid(dev); 3375 sc->bge_asicrev = BGE_ASICREV(sc->bge_chipid); 3376 sc->bge_chiprev = BGE_CHIPREV(sc->bge_chipid); 3377 3378 /* Set default PHY address. */ 3379 sc->bge_phy_addr = 1; 3380 /* 3381 * PHY address mapping for various devices. 3382 * 3383 * | F0 Cu | F0 Sr | F1 Cu | F1 Sr | 3384 * ---------+-------+-------+-------+-------+ 3385 * BCM57XX | 1 | X | X | X | 3386 * BCM5704 | 1 | X | 1 | X | 3387 * BCM5717 | 1 | 8 | 2 | 9 | 3388 * BCM5719 | 1 | 8 | 2 | 9 | 3389 * BCM5720 | 1 | 8 | 2 | 9 | 3390 * 3391 * | F2 Cu | F2 Sr | F3 Cu | F3 Sr | 3392 * ---------+-------+-------+-------+-------+ 3393 * BCM57XX | X | X | X | X | 3394 * BCM5704 | X | X | X | X | 3395 * BCM5717 | X | X | X | X | 3396 * BCM5719 | 3 | 10 | 4 | 11 | 3397 * BCM5720 | X | X | X | X | 3398 * 3399 * Other addresses may respond but they are not 3400 * IEEE compliant PHYs and should be ignored. 3401 */ 3402 if (sc->bge_asicrev == BGE_ASICREV_BCM5717 || 3403 sc->bge_asicrev == BGE_ASICREV_BCM5719 || 3404 sc->bge_asicrev == BGE_ASICREV_BCM5720) { 3405 if (sc->bge_chipid != BGE_CHIPID_BCM5717_A0) { 3406 if (CSR_READ_4(sc, BGE_SGDIG_STS) & 3407 BGE_SGDIGSTS_IS_SERDES) 3408 sc->bge_phy_addr = sc->bge_func_addr + 8; 3409 else 3410 sc->bge_phy_addr = sc->bge_func_addr + 1; 3411 } else { 3412 if (CSR_READ_4(sc, BGE_CPMU_PHY_STRAP) & 3413 BGE_CPMU_PHY_STRAP_IS_SERDES) 3414 sc->bge_phy_addr = sc->bge_func_addr + 8; 3415 else 3416 sc->bge_phy_addr = sc->bge_func_addr + 1; 3417 } 3418 } 3419 3420 if (bge_has_eaddr(sc)) 3421 sc->bge_flags |= BGE_FLAG_EADDR; 3422 3423 /* Save chipset family. */ 3424 switch (sc->bge_asicrev) { 3425 case BGE_ASICREV_BCM5762: 3426 case BGE_ASICREV_BCM57765: 3427 case BGE_ASICREV_BCM57766: 3428 sc->bge_flags |= BGE_FLAG_57765_PLUS; 3429 /* FALLTHROUGH */ 3430 case BGE_ASICREV_BCM5717: 3431 case BGE_ASICREV_BCM5719: 3432 case BGE_ASICREV_BCM5720: 3433 sc->bge_flags |= BGE_FLAG_5717_PLUS | BGE_FLAG_5755_PLUS | 3434 BGE_FLAG_575X_PLUS | BGE_FLAG_5705_PLUS | BGE_FLAG_JUMBO | 3435 BGE_FLAG_JUMBO_FRAME; 3436 if (sc->bge_asicrev == BGE_ASICREV_BCM5719 || 3437 sc->bge_asicrev == BGE_ASICREV_BCM5720) { 3438 /* 3439 * Enable work around for DMA engine miscalculation 3440 * of TXMBUF available space. 3441 */ 3442 sc->bge_flags |= BGE_FLAG_RDMA_BUG; 3443 if (sc->bge_asicrev == BGE_ASICREV_BCM5719 && 3444 sc->bge_chipid == BGE_CHIPID_BCM5719_A0) { 3445 /* Jumbo frame on BCM5719 A0 does not work. */ 3446 sc->bge_flags &= ~BGE_FLAG_JUMBO; 3447 } 3448 } 3449 break; 3450 case BGE_ASICREV_BCM5755: 3451 case BGE_ASICREV_BCM5761: 3452 case BGE_ASICREV_BCM5784: 3453 case BGE_ASICREV_BCM5785: 3454 case BGE_ASICREV_BCM5787: 3455 case BGE_ASICREV_BCM57780: 3456 sc->bge_flags |= BGE_FLAG_5755_PLUS | BGE_FLAG_575X_PLUS | 3457 BGE_FLAG_5705_PLUS; 3458 break; 3459 case BGE_ASICREV_BCM5700: 3460 case BGE_ASICREV_BCM5701: 3461 case BGE_ASICREV_BCM5703: 3462 case BGE_ASICREV_BCM5704: 3463 sc->bge_flags |= BGE_FLAG_5700_FAMILY | BGE_FLAG_JUMBO; 3464 break; 3465 case BGE_ASICREV_BCM5714_A0: 3466 case BGE_ASICREV_BCM5780: 3467 case BGE_ASICREV_BCM5714: 3468 sc->bge_flags |= BGE_FLAG_5714_FAMILY | BGE_FLAG_JUMBO_STD; 3469 /* FALLTHROUGH */ 3470 case BGE_ASICREV_BCM5750: 3471 case BGE_ASICREV_BCM5752: 3472 case BGE_ASICREV_BCM5906: 3473 sc->bge_flags |= BGE_FLAG_575X_PLUS; 3474 /* FALLTHROUGH */ 3475 case BGE_ASICREV_BCM5705: 3476 sc->bge_flags |= BGE_FLAG_5705_PLUS; 3477 break; 3478 } 3479 3480 /* Identify chips with APE processor. */ 3481 switch (sc->bge_asicrev) { 3482 case BGE_ASICREV_BCM5717: 3483 case BGE_ASICREV_BCM5719: 3484 case BGE_ASICREV_BCM5720: 3485 case BGE_ASICREV_BCM5761: 3486 case BGE_ASICREV_BCM5762: 3487 sc->bge_flags |= BGE_FLAG_APE; 3488 break; 3489 } 3490 3491 /* Chips with APE need BAR2 access for APE registers/memory. */ 3492 if ((sc->bge_flags & BGE_FLAG_APE) != 0) { 3493 rid = PCIR_BAR(2); 3494 sc->bge_res2 = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, 3495 RF_ACTIVE); 3496 if (sc->bge_res2 == NULL) { 3497 device_printf (sc->bge_dev, 3498 "couldn't map BAR2 memory\n"); 3499 error = ENXIO; 3500 goto fail; 3501 } 3502 3503 /* Enable APE register/memory access by host driver. */ 3504 pcistate = pci_read_config(dev, BGE_PCI_PCISTATE, 4); 3505 pcistate |= BGE_PCISTATE_ALLOW_APE_CTLSPC_WR | 3506 BGE_PCISTATE_ALLOW_APE_SHMEM_WR | 3507 BGE_PCISTATE_ALLOW_APE_PSPACE_WR; 3508 pci_write_config(dev, BGE_PCI_PCISTATE, pcistate, 4); 3509 3510 bge_ape_lock_init(sc); 3511 bge_ape_read_fw_ver(sc); 3512 } 3513 3514 /* Add SYSCTLs, requires the chipset family to be set. */ 3515 bge_add_sysctls(sc); 3516 3517 /* Identify the chips that use an CPMU. */ 3518 if (BGE_IS_5717_PLUS(sc) || 3519 sc->bge_asicrev == BGE_ASICREV_BCM5784 || 3520 sc->bge_asicrev == BGE_ASICREV_BCM5761 || 3521 sc->bge_asicrev == BGE_ASICREV_BCM5785 || 3522 sc->bge_asicrev == BGE_ASICREV_BCM57780) 3523 sc->bge_flags |= BGE_FLAG_CPMU_PRESENT; 3524 if ((sc->bge_flags & BGE_FLAG_CPMU_PRESENT) != 0) 3525 sc->bge_mi_mode = BGE_MIMODE_500KHZ_CONST; 3526 else 3527 sc->bge_mi_mode = BGE_MIMODE_BASE; 3528 /* Enable auto polling for BCM570[0-5]. */ 3529 if (BGE_IS_5700_FAMILY(sc) || sc->bge_asicrev == BGE_ASICREV_BCM5705) 3530 sc->bge_mi_mode |= BGE_MIMODE_AUTOPOLL; 3531 3532 /* 3533 * All Broadcom controllers have 4GB boundary DMA bug. 3534 * Whenever an address crosses a multiple of the 4GB boundary 3535 * (including 4GB, 8Gb, 12Gb, etc.) and makes the transition 3536 * from 0xX_FFFF_FFFF to 0x(X+1)_0000_0000 an internal DMA 3537 * state machine will lockup and cause the device to hang. 3538 */ 3539 sc->bge_flags |= BGE_FLAG_4G_BNDRY_BUG; 3540 3541 /* BCM5755 or higher and BCM5906 have short DMA bug. */ 3542 if (BGE_IS_5755_PLUS(sc) || sc->bge_asicrev == BGE_ASICREV_BCM5906) 3543 sc->bge_flags |= BGE_FLAG_SHORT_DMA_BUG; 3544 3545 /* 3546 * BCM5719 cannot handle DMA requests for DMA segments that 3547 * have larger than 4KB in size. However the maximum DMA 3548 * segment size created in DMA tag is 4KB for TSO, so we 3549 * wouldn't encounter the issue here. 3550 */ 3551 if (sc->bge_asicrev == BGE_ASICREV_BCM5719) 3552 sc->bge_flags |= BGE_FLAG_4K_RDMA_BUG; 3553 3554 misccfg = CSR_READ_4(sc, BGE_MISC_CFG) & BGE_MISCCFG_BOARD_ID_MASK; 3555 if (sc->bge_asicrev == BGE_ASICREV_BCM5705) { 3556 if (misccfg == BGE_MISCCFG_BOARD_ID_5788 || 3557 misccfg == BGE_MISCCFG_BOARD_ID_5788M) 3558 sc->bge_flags |= BGE_FLAG_5788; 3559 } 3560 3561 capmask = BMSR_DEFCAPMASK; 3562 if ((sc->bge_asicrev == BGE_ASICREV_BCM5703 && 3563 (misccfg == 0x4000 || misccfg == 0x8000)) || 3564 (sc->bge_asicrev == BGE_ASICREV_BCM5705 && 3565 pci_get_vendor(dev) == BCOM_VENDORID && 3566 (pci_get_device(dev) == BCOM_DEVICEID_BCM5901 || 3567 pci_get_device(dev) == BCOM_DEVICEID_BCM5901A2 || 3568 pci_get_device(dev) == BCOM_DEVICEID_BCM5705F)) || 3569 (pci_get_vendor(dev) == BCOM_VENDORID && 3570 (pci_get_device(dev) == BCOM_DEVICEID_BCM5751F || 3571 pci_get_device(dev) == BCOM_DEVICEID_BCM5753F || 3572 pci_get_device(dev) == BCOM_DEVICEID_BCM5787F)) || 3573 pci_get_device(dev) == BCOM_DEVICEID_BCM57790 || 3574 pci_get_device(dev) == BCOM_DEVICEID_BCM57791 || 3575 pci_get_device(dev) == BCOM_DEVICEID_BCM57795 || 3576 sc->bge_asicrev == BGE_ASICREV_BCM5906) { 3577 /* These chips are 10/100 only. */ 3578 capmask &= ~BMSR_EXTSTAT; 3579 sc->bge_phy_flags |= BGE_PHY_NO_WIRESPEED; 3580 } 3581 3582 /* 3583 * Some controllers seem to require a special firmware to use 3584 * TSO. But the firmware is not available to FreeBSD and Linux 3585 * claims that the TSO performed by the firmware is slower than 3586 * hardware based TSO. Moreover the firmware based TSO has one 3587 * known bug which can't handle TSO if Ethernet header + IP/TCP 3588 * header is greater than 80 bytes. A workaround for the TSO 3589 * bug exist but it seems it's too expensive than not using 3590 * TSO at all. Some hardwares also have the TSO bug so limit 3591 * the TSO to the controllers that are not affected TSO issues 3592 * (e.g. 5755 or higher). 3593 */ 3594 if (BGE_IS_5717_PLUS(sc)) { 3595 /* BCM5717 requires different TSO configuration. */ 3596 sc->bge_flags |= BGE_FLAG_TSO3; 3597 if (sc->bge_asicrev == BGE_ASICREV_BCM5719 && 3598 sc->bge_chipid == BGE_CHIPID_BCM5719_A0) { 3599 /* TSO on BCM5719 A0 does not work. */ 3600 sc->bge_flags &= ~BGE_FLAG_TSO3; 3601 } 3602 } else if (BGE_IS_5755_PLUS(sc)) { 3603 /* 3604 * BCM5754 and BCM5787 shares the same ASIC id so 3605 * explicit device id check is required. 3606 * Due to unknown reason TSO does not work on BCM5755M. 3607 */ 3608 if (pci_get_device(dev) != BCOM_DEVICEID_BCM5754 && 3609 pci_get_device(dev) != BCOM_DEVICEID_BCM5754M && 3610 pci_get_device(dev) != BCOM_DEVICEID_BCM5755M) 3611 sc->bge_flags |= BGE_FLAG_TSO; 3612 } 3613 3614 /* 3615 * Check if this is a PCI-X or PCI Express device. 3616 */ 3617 if (pci_find_cap(dev, PCIY_EXPRESS, ®) == 0) { 3618 /* 3619 * Found a PCI Express capabilities register, this 3620 * must be a PCI Express device. 3621 */ 3622 sc->bge_flags |= BGE_FLAG_PCIE; 3623 sc->bge_expcap = reg; 3624 /* Extract supported maximum payload size. */ 3625 sc->bge_mps = pci_read_config(dev, sc->bge_expcap + 3626 PCIER_DEVICE_CAP, 2); 3627 sc->bge_mps = 128 << (sc->bge_mps & PCIEM_CAP_MAX_PAYLOAD); 3628 if (sc->bge_asicrev == BGE_ASICREV_BCM5719 || 3629 sc->bge_asicrev == BGE_ASICREV_BCM5720) 3630 sc->bge_expmrq = 2048; 3631 else 3632 sc->bge_expmrq = 4096; 3633 pci_set_max_read_req(dev, sc->bge_expmrq); 3634 } else { 3635 /* 3636 * Check if the device is in PCI-X Mode. 3637 * (This bit is not valid on PCI Express controllers.) 3638 */ 3639 if (pci_find_cap(dev, PCIY_PCIX, ®) == 0) 3640 sc->bge_pcixcap = reg; 3641 if ((pci_read_config(dev, BGE_PCI_PCISTATE, 4) & 3642 BGE_PCISTATE_PCI_BUSMODE) == 0) 3643 sc->bge_flags |= BGE_FLAG_PCIX; 3644 } 3645 3646 /* 3647 * The 40bit DMA bug applies to the 5714/5715 controllers and is 3648 * not actually a MAC controller bug but an issue with the embedded 3649 * PCIe to PCI-X bridge in the device. Use 40bit DMA workaround. 3650 */ 3651 if (BGE_IS_5714_FAMILY(sc) && (sc->bge_flags & BGE_FLAG_PCIX)) 3652 sc->bge_flags |= BGE_FLAG_40BIT_BUG; 3653 /* 3654 * Some PCI-X bridges are known to trigger write reordering to 3655 * the mailbox registers. Typical phenomena is watchdog timeouts 3656 * caused by out-of-order TX completions. Enable workaround for 3657 * PCI-X devices that live behind these bridges. 3658 * Note, PCI-X controllers can run in PCI mode so we can't use 3659 * BGE_FLAG_PCIX flag to detect PCI-X controllers. 3660 */ 3661 if (sc->bge_pcixcap != 0 && bge_mbox_reorder(sc) != 0) 3662 sc->bge_flags |= BGE_FLAG_MBOX_REORDER; 3663 /* 3664 * Allocate the interrupt, using MSI if possible. These devices 3665 * support 8 MSI messages, but only the first one is used in 3666 * normal operation. 3667 */ 3668 rid = 0; 3669 if (pci_find_cap(sc->bge_dev, PCIY_MSI, ®) == 0) { 3670 sc->bge_msicap = reg; 3671 reg = 1; 3672 if (bge_can_use_msi(sc) && pci_alloc_msi(dev, ®) == 0) { 3673 rid = 1; 3674 sc->bge_flags |= BGE_FLAG_MSI; 3675 } 3676 } 3677 3678 /* 3679 * All controllers except BCM5700 supports tagged status but 3680 * we use tagged status only for MSI case on BCM5717. Otherwise 3681 * MSI on BCM5717 does not work. 3682 */ 3683 #ifndef DEVICE_POLLING 3684 if (sc->bge_flags & BGE_FLAG_MSI && BGE_IS_5717_PLUS(sc)) 3685 sc->bge_flags |= BGE_FLAG_TAGGED_STATUS; 3686 #endif 3687 3688 sc->bge_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, 3689 RF_ACTIVE | (rid != 0 ? 0 : RF_SHAREABLE)); 3690 3691 if (sc->bge_irq == NULL) { 3692 device_printf(sc->bge_dev, "couldn't map interrupt\n"); 3693 error = ENXIO; 3694 goto fail; 3695 } 3696 3697 bge_devinfo(sc); 3698 3699 sc->bge_asf_mode = 0; 3700 /* No ASF if APE present. */ 3701 if ((sc->bge_flags & BGE_FLAG_APE) == 0) { 3702 if (bge_allow_asf && (bge_readmem_ind(sc, BGE_SRAM_DATA_SIG) == 3703 BGE_SRAM_DATA_SIG_MAGIC)) { 3704 if (bge_readmem_ind(sc, BGE_SRAM_DATA_CFG) & 3705 BGE_HWCFG_ASF) { 3706 sc->bge_asf_mode |= ASF_ENABLE; 3707 sc->bge_asf_mode |= ASF_STACKUP; 3708 if (BGE_IS_575X_PLUS(sc)) 3709 sc->bge_asf_mode |= ASF_NEW_HANDSHAKE; 3710 } 3711 } 3712 } 3713 3714 bge_stop_fw(sc); 3715 bge_sig_pre_reset(sc, BGE_RESET_SHUTDOWN); 3716 if (bge_reset(sc)) { 3717 device_printf(sc->bge_dev, "chip reset failed\n"); 3718 error = ENXIO; 3719 goto fail; 3720 } 3721 3722 bge_sig_legacy(sc, BGE_RESET_SHUTDOWN); 3723 bge_sig_post_reset(sc, BGE_RESET_SHUTDOWN); 3724 3725 if (bge_chipinit(sc)) { 3726 device_printf(sc->bge_dev, "chip initialization failed\n"); 3727 error = ENXIO; 3728 goto fail; 3729 } 3730 3731 error = bge_get_eaddr(sc, eaddr); 3732 if (error) { 3733 device_printf(sc->bge_dev, 3734 "failed to read station address\n"); 3735 error = ENXIO; 3736 goto fail; 3737 } 3738 3739 /* 5705 limits RX return ring to 512 entries. */ 3740 if (BGE_IS_5717_PLUS(sc)) 3741 sc->bge_return_ring_cnt = BGE_RETURN_RING_CNT; 3742 else if (BGE_IS_5705_PLUS(sc)) 3743 sc->bge_return_ring_cnt = BGE_RETURN_RING_CNT_5705; 3744 else 3745 sc->bge_return_ring_cnt = BGE_RETURN_RING_CNT; 3746 3747 if (bge_dma_alloc(sc)) { 3748 device_printf(sc->bge_dev, 3749 "failed to allocate DMA resources\n"); 3750 error = ENXIO; 3751 goto fail; 3752 } 3753 3754 /* Set default tuneable values. */ 3755 sc->bge_stat_ticks = BGE_TICKS_PER_SEC; 3756 sc->bge_rx_coal_ticks = 150; 3757 sc->bge_tx_coal_ticks = 150; 3758 sc->bge_rx_max_coal_bds = 10; 3759 sc->bge_tx_max_coal_bds = 10; 3760 3761 /* Initialize checksum features to use. */ 3762 sc->bge_csum_features = BGE_CSUM_FEATURES; 3763 if (sc->bge_forced_udpcsum != 0) 3764 sc->bge_csum_features |= CSUM_UDP; 3765 3766 /* Set up ifnet structure */ 3767 ifp = sc->bge_ifp = if_alloc(IFT_ETHER); 3768 if (ifp == NULL) { 3769 device_printf(sc->bge_dev, "failed to if_alloc()\n"); 3770 error = ENXIO; 3771 goto fail; 3772 } 3773 if_setsoftc(ifp, sc); 3774 if_initname(ifp, device_get_name(dev), device_get_unit(dev)); 3775 if_setflags(ifp, IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST); 3776 if_setioctlfn(ifp, bge_ioctl); 3777 if_setstartfn(ifp, bge_start); 3778 if_setinitfn(ifp, bge_init); 3779 if_setgetcounterfn(ifp, bge_get_counter); 3780 if_setsendqlen(ifp, BGE_TX_RING_CNT - 1); 3781 if_setsendqready(ifp); 3782 if_sethwassist(ifp, sc->bge_csum_features); 3783 if_setcapabilities(ifp, IFCAP_HWCSUM | IFCAP_VLAN_HWTAGGING | 3784 IFCAP_VLAN_MTU); 3785 if ((sc->bge_flags & (BGE_FLAG_TSO | BGE_FLAG_TSO3)) != 0) { 3786 if_sethwassistbits(ifp, CSUM_TSO, 0); 3787 if_setcapabilitiesbit(ifp, IFCAP_TSO4 | IFCAP_VLAN_HWTSO, 0); 3788 } 3789 #ifdef IFCAP_VLAN_HWCSUM 3790 if_setcapabilitiesbit(ifp, IFCAP_VLAN_HWCSUM, 0); 3791 #endif 3792 if_setcapenable(ifp, if_getcapabilities(ifp)); 3793 #ifdef DEVICE_POLLING 3794 if_setcapabilitiesbit(ifp, IFCAP_POLLING, 0); 3795 #endif 3796 3797 /* 3798 * 5700 B0 chips do not support checksumming correctly due 3799 * to hardware bugs. 3800 */ 3801 if (sc->bge_chipid == BGE_CHIPID_BCM5700_B0) { 3802 if_setcapabilitiesbit(ifp, 0, IFCAP_HWCSUM); 3803 if_setcapenablebit(ifp, 0, IFCAP_HWCSUM); 3804 if_sethwassist(ifp, 0); 3805 } 3806 3807 /* 3808 * Figure out what sort of media we have by checking the 3809 * hardware config word in the first 32k of NIC internal memory, 3810 * or fall back to examining the EEPROM if necessary. 3811 * Note: on some BCM5700 cards, this value appears to be unset. 3812 * If that's the case, we have to rely on identifying the NIC 3813 * by its PCI subsystem ID, as we do below for the SysKonnect 3814 * SK-9D41. 3815 */ 3816 if (bge_readmem_ind(sc, BGE_SRAM_DATA_SIG) == BGE_SRAM_DATA_SIG_MAGIC) 3817 hwcfg = bge_readmem_ind(sc, BGE_SRAM_DATA_CFG); 3818 else if ((sc->bge_flags & BGE_FLAG_EADDR) && 3819 (sc->bge_asicrev != BGE_ASICREV_BCM5906)) { 3820 if (bge_read_eeprom(sc, (caddr_t)&hwcfg, BGE_EE_HWCFG_OFFSET, 3821 sizeof(hwcfg))) { 3822 device_printf(sc->bge_dev, "failed to read EEPROM\n"); 3823 error = ENXIO; 3824 goto fail; 3825 } 3826 hwcfg = ntohl(hwcfg); 3827 } 3828 3829 /* The SysKonnect SK-9D41 is a 1000baseSX card. */ 3830 if ((pci_read_config(dev, BGE_PCI_SUBSYS, 4) >> 16) == 3831 SK_SUBSYSID_9D41 || (hwcfg & BGE_HWCFG_MEDIA) == BGE_MEDIA_FIBER) { 3832 if (BGE_IS_5705_PLUS(sc)) { 3833 sc->bge_flags |= BGE_FLAG_MII_SERDES; 3834 sc->bge_phy_flags |= BGE_PHY_NO_WIRESPEED; 3835 } else 3836 sc->bge_flags |= BGE_FLAG_TBI; 3837 } 3838 3839 /* Set various PHY bug flags. */ 3840 if (sc->bge_chipid == BGE_CHIPID_BCM5701_A0 || 3841 sc->bge_chipid == BGE_CHIPID_BCM5701_B0) 3842 sc->bge_phy_flags |= BGE_PHY_CRC_BUG; 3843 if (sc->bge_chiprev == BGE_CHIPREV_5703_AX || 3844 sc->bge_chiprev == BGE_CHIPREV_5704_AX) 3845 sc->bge_phy_flags |= BGE_PHY_ADC_BUG; 3846 if (sc->bge_chipid == BGE_CHIPID_BCM5704_A0) 3847 sc->bge_phy_flags |= BGE_PHY_5704_A0_BUG; 3848 if (pci_get_subvendor(dev) == DELL_VENDORID) 3849 sc->bge_phy_flags |= BGE_PHY_NO_3LED; 3850 if ((BGE_IS_5705_PLUS(sc)) && 3851 sc->bge_asicrev != BGE_ASICREV_BCM5906 && 3852 sc->bge_asicrev != BGE_ASICREV_BCM5785 && 3853 sc->bge_asicrev != BGE_ASICREV_BCM57780 && 3854 !BGE_IS_5717_PLUS(sc)) { 3855 if (sc->bge_asicrev == BGE_ASICREV_BCM5755 || 3856 sc->bge_asicrev == BGE_ASICREV_BCM5761 || 3857 sc->bge_asicrev == BGE_ASICREV_BCM5784 || 3858 sc->bge_asicrev == BGE_ASICREV_BCM5787) { 3859 if (pci_get_device(dev) != BCOM_DEVICEID_BCM5722 && 3860 pci_get_device(dev) != BCOM_DEVICEID_BCM5756) 3861 sc->bge_phy_flags |= BGE_PHY_JITTER_BUG; 3862 if (pci_get_device(dev) == BCOM_DEVICEID_BCM5755M) 3863 sc->bge_phy_flags |= BGE_PHY_ADJUST_TRIM; 3864 } else 3865 sc->bge_phy_flags |= BGE_PHY_BER_BUG; 3866 } 3867 3868 /* 3869 * Don't enable Ethernet@WireSpeed for the 5700 or the 3870 * 5705 A0 and A1 chips. 3871 */ 3872 if (sc->bge_asicrev == BGE_ASICREV_BCM5700 || 3873 (sc->bge_asicrev == BGE_ASICREV_BCM5705 && 3874 (sc->bge_chipid != BGE_CHIPID_BCM5705_A0 && 3875 sc->bge_chipid != BGE_CHIPID_BCM5705_A1))) 3876 sc->bge_phy_flags |= BGE_PHY_NO_WIRESPEED; 3877 3878 if (sc->bge_flags & BGE_FLAG_TBI) { 3879 ifmedia_init(&sc->bge_ifmedia, IFM_IMASK, bge_ifmedia_upd, 3880 bge_ifmedia_sts); 3881 ifmedia_add(&sc->bge_ifmedia, IFM_ETHER | IFM_1000_SX, 0, NULL); 3882 ifmedia_add(&sc->bge_ifmedia, IFM_ETHER | IFM_1000_SX | IFM_FDX, 3883 0, NULL); 3884 ifmedia_add(&sc->bge_ifmedia, IFM_ETHER | IFM_AUTO, 0, NULL); 3885 ifmedia_set(&sc->bge_ifmedia, IFM_ETHER | IFM_AUTO); 3886 sc->bge_ifmedia.ifm_media = sc->bge_ifmedia.ifm_cur->ifm_media; 3887 } else { 3888 /* 3889 * Do transceiver setup and tell the firmware the 3890 * driver is down so we can try to get access the 3891 * probe if ASF is running. Retry a couple of times 3892 * if we get a conflict with the ASF firmware accessing 3893 * the PHY. 3894 */ 3895 trys = 0; 3896 BGE_CLRBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP); 3897 again: 3898 bge_asf_driver_up(sc); 3899 3900 error = mii_attach(dev, &sc->bge_miibus, ifp, 3901 (ifm_change_cb_t)bge_ifmedia_upd, 3902 (ifm_stat_cb_t)bge_ifmedia_sts, capmask, sc->bge_phy_addr, 3903 MII_OFFSET_ANY, MIIF_DOPAUSE); 3904 if (error != 0) { 3905 if (trys++ < 4) { 3906 device_printf(sc->bge_dev, "Try again\n"); 3907 bge_miibus_writereg(sc->bge_dev, 3908 sc->bge_phy_addr, MII_BMCR, BMCR_RESET); 3909 goto again; 3910 } 3911 device_printf(sc->bge_dev, "attaching PHYs failed\n"); 3912 goto fail; 3913 } 3914 3915 /* 3916 * Now tell the firmware we are going up after probing the PHY 3917 */ 3918 if (sc->bge_asf_mode & ASF_STACKUP) 3919 BGE_SETBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP); 3920 } 3921 3922 /* 3923 * When using the BCM5701 in PCI-X mode, data corruption has 3924 * been observed in the first few bytes of some received packets. 3925 * Aligning the packet buffer in memory eliminates the corruption. 3926 * Unfortunately, this misaligns the packet payloads. On platforms 3927 * which do not support unaligned accesses, we will realign the 3928 * payloads by copying the received packets. 3929 */ 3930 if (sc->bge_asicrev == BGE_ASICREV_BCM5701 && 3931 sc->bge_flags & BGE_FLAG_PCIX) 3932 sc->bge_flags |= BGE_FLAG_RX_ALIGNBUG; 3933 3934 /* 3935 * Call MI attach routine. 3936 */ 3937 ether_ifattach(ifp, eaddr); 3938 3939 /* Tell upper layer we support long frames. */ 3940 if_setifheaderlen(ifp, sizeof(struct ether_vlan_header)); 3941 3942 /* 3943 * Hookup IRQ last. 3944 */ 3945 if (BGE_IS_5755_PLUS(sc) && sc->bge_flags & BGE_FLAG_MSI) { 3946 /* Take advantage of single-shot MSI. */ 3947 CSR_WRITE_4(sc, BGE_MSI_MODE, CSR_READ_4(sc, BGE_MSI_MODE) & 3948 ~BGE_MSIMODE_ONE_SHOT_DISABLE); 3949 sc->bge_tq = taskqueue_create_fast("bge_taskq", M_WAITOK, 3950 taskqueue_thread_enqueue, &sc->bge_tq); 3951 if (sc->bge_tq == NULL) { 3952 device_printf(dev, "could not create taskqueue.\n"); 3953 ether_ifdetach(ifp); 3954 error = ENOMEM; 3955 goto fail; 3956 } 3957 error = taskqueue_start_threads(&sc->bge_tq, 1, PI_NET, 3958 "%s taskq", device_get_nameunit(sc->bge_dev)); 3959 if (error != 0) { 3960 device_printf(dev, "could not start threads.\n"); 3961 ether_ifdetach(ifp); 3962 goto fail; 3963 } 3964 error = bus_setup_intr(dev, sc->bge_irq, 3965 INTR_TYPE_NET | INTR_MPSAFE, bge_msi_intr, NULL, sc, 3966 &sc->bge_intrhand); 3967 } else 3968 error = bus_setup_intr(dev, sc->bge_irq, 3969 INTR_TYPE_NET | INTR_MPSAFE, NULL, bge_intr, sc, 3970 &sc->bge_intrhand); 3971 3972 if (error) { 3973 ether_ifdetach(ifp); 3974 device_printf(sc->bge_dev, "couldn't set up irq\n"); 3975 goto fail; 3976 } 3977 3978 /* Attach driver debugnet methods. */ 3979 DEBUGNET_SET(ifp, bge); 3980 3981 fail: 3982 if (error) 3983 bge_detach(dev); 3984 return (error); 3985 } 3986 3987 static int 3988 bge_detach(device_t dev) 3989 { 3990 struct bge_softc *sc; 3991 if_t ifp; 3992 3993 sc = device_get_softc(dev); 3994 ifp = sc->bge_ifp; 3995 3996 #ifdef DEVICE_POLLING 3997 if (if_getcapenable(ifp) & IFCAP_POLLING) 3998 ether_poll_deregister(ifp); 3999 #endif 4000 4001 if (device_is_attached(dev)) { 4002 ether_ifdetach(ifp); 4003 BGE_LOCK(sc); 4004 bge_stop(sc); 4005 BGE_UNLOCK(sc); 4006 callout_drain(&sc->bge_stat_ch); 4007 } 4008 4009 if (sc->bge_tq) 4010 taskqueue_drain(sc->bge_tq, &sc->bge_intr_task); 4011 4012 if (sc->bge_flags & BGE_FLAG_TBI) 4013 ifmedia_removeall(&sc->bge_ifmedia); 4014 else if (sc->bge_miibus != NULL) { 4015 bus_generic_detach(dev); 4016 device_delete_child(dev, sc->bge_miibus); 4017 } 4018 4019 bge_release_resources(sc); 4020 4021 return (0); 4022 } 4023 4024 static void 4025 bge_release_resources(struct bge_softc *sc) 4026 { 4027 device_t dev; 4028 4029 dev = sc->bge_dev; 4030 4031 if (sc->bge_tq != NULL) 4032 taskqueue_free(sc->bge_tq); 4033 4034 if (sc->bge_intrhand != NULL) 4035 bus_teardown_intr(dev, sc->bge_irq, sc->bge_intrhand); 4036 4037 if (sc->bge_irq != NULL) { 4038 bus_release_resource(dev, SYS_RES_IRQ, 4039 rman_get_rid(sc->bge_irq), sc->bge_irq); 4040 pci_release_msi(dev); 4041 } 4042 4043 if (sc->bge_res != NULL) 4044 bus_release_resource(dev, SYS_RES_MEMORY, 4045 rman_get_rid(sc->bge_res), sc->bge_res); 4046 4047 if (sc->bge_res2 != NULL) 4048 bus_release_resource(dev, SYS_RES_MEMORY, 4049 rman_get_rid(sc->bge_res2), sc->bge_res2); 4050 4051 if (sc->bge_ifp != NULL) 4052 if_free(sc->bge_ifp); 4053 4054 bge_dma_free(sc); 4055 4056 if (mtx_initialized(&sc->bge_mtx)) /* XXX */ 4057 BGE_LOCK_DESTROY(sc); 4058 } 4059 4060 static int 4061 bge_reset(struct bge_softc *sc) 4062 { 4063 device_t dev; 4064 uint32_t cachesize, command, mac_mode, mac_mode_mask, reset, val; 4065 void (*write_op)(struct bge_softc *, int, int); 4066 uint16_t devctl; 4067 int i; 4068 4069 dev = sc->bge_dev; 4070 4071 mac_mode_mask = BGE_MACMODE_HALF_DUPLEX | BGE_MACMODE_PORTMODE; 4072 if ((sc->bge_mfw_flags & BGE_MFW_ON_APE) != 0) 4073 mac_mode_mask |= BGE_MACMODE_APE_RX_EN | BGE_MACMODE_APE_TX_EN; 4074 mac_mode = CSR_READ_4(sc, BGE_MAC_MODE) & mac_mode_mask; 4075 4076 if (BGE_IS_575X_PLUS(sc) && !BGE_IS_5714_FAMILY(sc) && 4077 (sc->bge_asicrev != BGE_ASICREV_BCM5906)) { 4078 if (sc->bge_flags & BGE_FLAG_PCIE) 4079 write_op = bge_writemem_direct; 4080 else 4081 write_op = bge_writemem_ind; 4082 } else 4083 write_op = bge_writereg_ind; 4084 4085 if (sc->bge_asicrev != BGE_ASICREV_BCM5700 && 4086 sc->bge_asicrev != BGE_ASICREV_BCM5701) { 4087 CSR_WRITE_4(sc, BGE_NVRAM_SWARB, BGE_NVRAMSWARB_SET1); 4088 for (i = 0; i < 8000; i++) { 4089 if (CSR_READ_4(sc, BGE_NVRAM_SWARB) & 4090 BGE_NVRAMSWARB_GNT1) 4091 break; 4092 DELAY(20); 4093 } 4094 if (i == 8000) { 4095 if (bootverbose) 4096 device_printf(dev, "NVRAM lock timedout!\n"); 4097 } 4098 } 4099 /* Take APE lock when performing reset. */ 4100 bge_ape_lock(sc, BGE_APE_LOCK_GRC); 4101 4102 /* Save some important PCI state. */ 4103 cachesize = pci_read_config(dev, BGE_PCI_CACHESZ, 4); 4104 command = pci_read_config(dev, BGE_PCI_CMD, 4); 4105 4106 pci_write_config(dev, BGE_PCI_MISC_CTL, 4107 BGE_PCIMISCCTL_INDIRECT_ACCESS | BGE_PCIMISCCTL_MASK_PCI_INTR | 4108 BGE_HIF_SWAP_OPTIONS | BGE_PCIMISCCTL_PCISTATE_RW, 4); 4109 4110 /* Disable fastboot on controllers that support it. */ 4111 if (sc->bge_asicrev == BGE_ASICREV_BCM5752 || 4112 BGE_IS_5755_PLUS(sc)) { 4113 if (bootverbose) 4114 device_printf(dev, "Disabling fastboot\n"); 4115 CSR_WRITE_4(sc, BGE_FASTBOOT_PC, 0x0); 4116 } 4117 4118 /* 4119 * Write the magic number to SRAM at offset 0xB50. 4120 * When firmware finishes its initialization it will 4121 * write ~BGE_SRAM_FW_MB_MAGIC to the same location. 4122 */ 4123 bge_writemem_ind(sc, BGE_SRAM_FW_MB, BGE_SRAM_FW_MB_MAGIC); 4124 4125 reset = BGE_MISCCFG_RESET_CORE_CLOCKS | BGE_32BITTIME_66MHZ; 4126 4127 /* XXX: Broadcom Linux driver. */ 4128 if (sc->bge_flags & BGE_FLAG_PCIE) { 4129 if (sc->bge_asicrev != BGE_ASICREV_BCM5785 && 4130 (sc->bge_flags & BGE_FLAG_5717_PLUS) == 0) { 4131 if (CSR_READ_4(sc, 0x7E2C) == 0x60) /* PCIE 1.0 */ 4132 CSR_WRITE_4(sc, 0x7E2C, 0x20); 4133 } 4134 if (sc->bge_chipid != BGE_CHIPID_BCM5750_A0) { 4135 /* Prevent PCIE link training during global reset */ 4136 CSR_WRITE_4(sc, BGE_MISC_CFG, 1 << 29); 4137 reset |= 1 << 29; 4138 } 4139 } 4140 4141 if (sc->bge_asicrev == BGE_ASICREV_BCM5906) { 4142 val = CSR_READ_4(sc, BGE_VCPU_STATUS); 4143 CSR_WRITE_4(sc, BGE_VCPU_STATUS, 4144 val | BGE_VCPU_STATUS_DRV_RESET); 4145 val = CSR_READ_4(sc, BGE_VCPU_EXT_CTRL); 4146 CSR_WRITE_4(sc, BGE_VCPU_EXT_CTRL, 4147 val & ~BGE_VCPU_EXT_CTRL_HALT_CPU); 4148 } 4149 4150 /* 4151 * Set GPHY Power Down Override to leave GPHY 4152 * powered up in D0 uninitialized. 4153 */ 4154 if (BGE_IS_5705_PLUS(sc) && 4155 (sc->bge_flags & BGE_FLAG_CPMU_PRESENT) == 0) 4156 reset |= BGE_MISCCFG_GPHY_PD_OVERRIDE; 4157 4158 /* Issue global reset */ 4159 write_op(sc, BGE_MISC_CFG, reset); 4160 4161 if (sc->bge_flags & BGE_FLAG_PCIE) 4162 DELAY(100 * 1000); 4163 else 4164 DELAY(1000); 4165 4166 /* XXX: Broadcom Linux driver. */ 4167 if (sc->bge_flags & BGE_FLAG_PCIE) { 4168 if (sc->bge_chipid == BGE_CHIPID_BCM5750_A0) { 4169 DELAY(500000); /* wait for link training to complete */ 4170 val = pci_read_config(dev, 0xC4, 4); 4171 pci_write_config(dev, 0xC4, val | (1 << 15), 4); 4172 } 4173 devctl = pci_read_config(dev, 4174 sc->bge_expcap + PCIER_DEVICE_CTL, 2); 4175 /* Clear enable no snoop and disable relaxed ordering. */ 4176 devctl &= ~(PCIEM_CTL_RELAXED_ORD_ENABLE | 4177 PCIEM_CTL_NOSNOOP_ENABLE); 4178 pci_write_config(dev, sc->bge_expcap + PCIER_DEVICE_CTL, 4179 devctl, 2); 4180 pci_set_max_read_req(dev, sc->bge_expmrq); 4181 /* Clear error status. */ 4182 pci_write_config(dev, sc->bge_expcap + PCIER_DEVICE_STA, 4183 PCIEM_STA_CORRECTABLE_ERROR | 4184 PCIEM_STA_NON_FATAL_ERROR | PCIEM_STA_FATAL_ERROR | 4185 PCIEM_STA_UNSUPPORTED_REQ, 2); 4186 } 4187 4188 /* Reset some of the PCI state that got zapped by reset. */ 4189 pci_write_config(dev, BGE_PCI_MISC_CTL, 4190 BGE_PCIMISCCTL_INDIRECT_ACCESS | BGE_PCIMISCCTL_MASK_PCI_INTR | 4191 BGE_HIF_SWAP_OPTIONS | BGE_PCIMISCCTL_PCISTATE_RW, 4); 4192 val = BGE_PCISTATE_ROM_ENABLE | BGE_PCISTATE_ROM_RETRY_ENABLE; 4193 if (sc->bge_chipid == BGE_CHIPID_BCM5704_A0 && 4194 (sc->bge_flags & BGE_FLAG_PCIX) != 0) 4195 val |= BGE_PCISTATE_RETRY_SAME_DMA; 4196 if ((sc->bge_mfw_flags & BGE_MFW_ON_APE) != 0) 4197 val |= BGE_PCISTATE_ALLOW_APE_CTLSPC_WR | 4198 BGE_PCISTATE_ALLOW_APE_SHMEM_WR | 4199 BGE_PCISTATE_ALLOW_APE_PSPACE_WR; 4200 pci_write_config(dev, BGE_PCI_PCISTATE, val, 4); 4201 pci_write_config(dev, BGE_PCI_CACHESZ, cachesize, 4); 4202 pci_write_config(dev, BGE_PCI_CMD, command, 4); 4203 /* 4204 * Disable PCI-X relaxed ordering to ensure status block update 4205 * comes first then packet buffer DMA. Otherwise driver may 4206 * read stale status block. 4207 */ 4208 if (sc->bge_flags & BGE_FLAG_PCIX) { 4209 devctl = pci_read_config(dev, 4210 sc->bge_pcixcap + PCIXR_COMMAND, 2); 4211 devctl &= ~PCIXM_COMMAND_ERO; 4212 if (sc->bge_asicrev == BGE_ASICREV_BCM5703) { 4213 devctl &= ~PCIXM_COMMAND_MAX_READ; 4214 devctl |= PCIXM_COMMAND_MAX_READ_2048; 4215 } else if (sc->bge_asicrev == BGE_ASICREV_BCM5704) { 4216 devctl &= ~(PCIXM_COMMAND_MAX_SPLITS | 4217 PCIXM_COMMAND_MAX_READ); 4218 devctl |= PCIXM_COMMAND_MAX_READ_2048; 4219 } 4220 pci_write_config(dev, sc->bge_pcixcap + PCIXR_COMMAND, 4221 devctl, 2); 4222 } 4223 /* Re-enable MSI, if necessary, and enable the memory arbiter. */ 4224 if (BGE_IS_5714_FAMILY(sc)) { 4225 /* This chip disables MSI on reset. */ 4226 if (sc->bge_flags & BGE_FLAG_MSI) { 4227 val = pci_read_config(dev, 4228 sc->bge_msicap + PCIR_MSI_CTRL, 2); 4229 pci_write_config(dev, 4230 sc->bge_msicap + PCIR_MSI_CTRL, 4231 val | PCIM_MSICTRL_MSI_ENABLE, 2); 4232 val = CSR_READ_4(sc, BGE_MSI_MODE); 4233 CSR_WRITE_4(sc, BGE_MSI_MODE, 4234 val | BGE_MSIMODE_ENABLE); 4235 } 4236 val = CSR_READ_4(sc, BGE_MARB_MODE); 4237 CSR_WRITE_4(sc, BGE_MARB_MODE, BGE_MARBMODE_ENABLE | val); 4238 } else 4239 CSR_WRITE_4(sc, BGE_MARB_MODE, BGE_MARBMODE_ENABLE); 4240 4241 /* Fix up byte swapping. */ 4242 CSR_WRITE_4(sc, BGE_MODE_CTL, bge_dma_swap_options(sc)); 4243 4244 val = CSR_READ_4(sc, BGE_MAC_MODE); 4245 val = (val & ~mac_mode_mask) | mac_mode; 4246 CSR_WRITE_4(sc, BGE_MAC_MODE, val); 4247 DELAY(40); 4248 4249 bge_ape_unlock(sc, BGE_APE_LOCK_GRC); 4250 4251 if (sc->bge_asicrev == BGE_ASICREV_BCM5906) { 4252 for (i = 0; i < BGE_TIMEOUT; i++) { 4253 val = CSR_READ_4(sc, BGE_VCPU_STATUS); 4254 if (val & BGE_VCPU_STATUS_INIT_DONE) 4255 break; 4256 DELAY(100); 4257 } 4258 if (i == BGE_TIMEOUT) { 4259 device_printf(dev, "reset timed out\n"); 4260 return (1); 4261 } 4262 } else { 4263 /* 4264 * Poll until we see the 1's complement of the magic number. 4265 * This indicates that the firmware initialization is complete. 4266 * We expect this to fail if no chip containing the Ethernet 4267 * address is fitted though. 4268 */ 4269 for (i = 0; i < BGE_TIMEOUT; i++) { 4270 DELAY(10); 4271 val = bge_readmem_ind(sc, BGE_SRAM_FW_MB); 4272 if (val == ~BGE_SRAM_FW_MB_MAGIC) 4273 break; 4274 } 4275 4276 if ((sc->bge_flags & BGE_FLAG_EADDR) && i == BGE_TIMEOUT) 4277 device_printf(dev, 4278 "firmware handshake timed out, found 0x%08x\n", 4279 val); 4280 /* BCM57765 A0 needs additional time before accessing. */ 4281 if (sc->bge_chipid == BGE_CHIPID_BCM57765_A0) 4282 DELAY(10 * 1000); /* XXX */ 4283 } 4284 4285 /* 4286 * The 5704 in TBI mode apparently needs some special 4287 * adjustment to insure the SERDES drive level is set 4288 * to 1.2V. 4289 */ 4290 if (sc->bge_asicrev == BGE_ASICREV_BCM5704 && 4291 sc->bge_flags & BGE_FLAG_TBI) { 4292 val = CSR_READ_4(sc, BGE_SERDES_CFG); 4293 val = (val & ~0xFFF) | 0x880; 4294 CSR_WRITE_4(sc, BGE_SERDES_CFG, val); 4295 } 4296 4297 /* XXX: Broadcom Linux driver. */ 4298 if (sc->bge_flags & BGE_FLAG_PCIE && 4299 !BGE_IS_5717_PLUS(sc) && 4300 sc->bge_chipid != BGE_CHIPID_BCM5750_A0 && 4301 sc->bge_asicrev != BGE_ASICREV_BCM5785) { 4302 /* Enable Data FIFO protection. */ 4303 val = CSR_READ_4(sc, 0x7C00); 4304 CSR_WRITE_4(sc, 0x7C00, val | (1 << 25)); 4305 } 4306 4307 if (sc->bge_asicrev == BGE_ASICREV_BCM5720) 4308 BGE_CLRBIT(sc, BGE_CPMU_CLCK_ORIDE, 4309 CPMU_CLCK_ORIDE_MAC_ORIDE_EN); 4310 4311 return (0); 4312 } 4313 4314 static __inline void 4315 bge_rxreuse_std(struct bge_softc *sc, int i) 4316 { 4317 struct bge_rx_bd *r; 4318 4319 r = &sc->bge_ldata.bge_rx_std_ring[sc->bge_std]; 4320 r->bge_flags = BGE_RXBDFLAG_END; 4321 r->bge_len = sc->bge_cdata.bge_rx_std_seglen[i]; 4322 r->bge_idx = i; 4323 BGE_INC(sc->bge_std, BGE_STD_RX_RING_CNT); 4324 } 4325 4326 static __inline void 4327 bge_rxreuse_jumbo(struct bge_softc *sc, int i) 4328 { 4329 struct bge_extrx_bd *r; 4330 4331 r = &sc->bge_ldata.bge_rx_jumbo_ring[sc->bge_jumbo]; 4332 r->bge_flags = BGE_RXBDFLAG_JUMBO_RING | BGE_RXBDFLAG_END; 4333 r->bge_len0 = sc->bge_cdata.bge_rx_jumbo_seglen[i][0]; 4334 r->bge_len1 = sc->bge_cdata.bge_rx_jumbo_seglen[i][1]; 4335 r->bge_len2 = sc->bge_cdata.bge_rx_jumbo_seglen[i][2]; 4336 r->bge_len3 = sc->bge_cdata.bge_rx_jumbo_seglen[i][3]; 4337 r->bge_idx = i; 4338 BGE_INC(sc->bge_jumbo, BGE_JUMBO_RX_RING_CNT); 4339 } 4340 4341 /* 4342 * Frame reception handling. This is called if there's a frame 4343 * on the receive return list. 4344 * 4345 * Note: we have to be able to handle two possibilities here: 4346 * 1) the frame is from the jumbo receive ring 4347 * 2) the frame is from the standard receive ring 4348 */ 4349 4350 static int 4351 bge_rxeof(struct bge_softc *sc, uint16_t rx_prod, int holdlck) 4352 { 4353 if_t ifp; 4354 int rx_npkts = 0, stdcnt = 0, jumbocnt = 0; 4355 uint16_t rx_cons; 4356 4357 rx_cons = sc->bge_rx_saved_considx; 4358 4359 /* Nothing to do. */ 4360 if (rx_cons == rx_prod) 4361 return (rx_npkts); 4362 4363 ifp = sc->bge_ifp; 4364 4365 bus_dmamap_sync(sc->bge_cdata.bge_rx_return_ring_tag, 4366 sc->bge_cdata.bge_rx_return_ring_map, BUS_DMASYNC_POSTREAD); 4367 bus_dmamap_sync(sc->bge_cdata.bge_rx_std_ring_tag, 4368 sc->bge_cdata.bge_rx_std_ring_map, BUS_DMASYNC_POSTWRITE); 4369 if (BGE_IS_JUMBO_CAPABLE(sc) && 4370 if_getmtu(ifp) + ETHER_HDR_LEN + ETHER_CRC_LEN + 4371 ETHER_VLAN_ENCAP_LEN > (MCLBYTES - ETHER_ALIGN)) 4372 bus_dmamap_sync(sc->bge_cdata.bge_rx_jumbo_ring_tag, 4373 sc->bge_cdata.bge_rx_jumbo_ring_map, BUS_DMASYNC_POSTWRITE); 4374 4375 while (rx_cons != rx_prod) { 4376 struct bge_rx_bd *cur_rx; 4377 uint32_t rxidx; 4378 struct mbuf *m = NULL; 4379 uint16_t vlan_tag = 0; 4380 int have_tag = 0; 4381 4382 #ifdef DEVICE_POLLING 4383 if (if_getcapenable(ifp) & IFCAP_POLLING) { 4384 if (sc->rxcycles <= 0) 4385 break; 4386 sc->rxcycles--; 4387 } 4388 #endif 4389 4390 cur_rx = &sc->bge_ldata.bge_rx_return_ring[rx_cons]; 4391 4392 rxidx = cur_rx->bge_idx; 4393 BGE_INC(rx_cons, sc->bge_return_ring_cnt); 4394 4395 if (if_getcapenable(ifp) & IFCAP_VLAN_HWTAGGING && 4396 cur_rx->bge_flags & BGE_RXBDFLAG_VLAN_TAG) { 4397 have_tag = 1; 4398 vlan_tag = cur_rx->bge_vlan_tag; 4399 } 4400 4401 if (cur_rx->bge_flags & BGE_RXBDFLAG_JUMBO_RING) { 4402 jumbocnt++; 4403 m = sc->bge_cdata.bge_rx_jumbo_chain[rxidx]; 4404 if (cur_rx->bge_flags & BGE_RXBDFLAG_ERROR) { 4405 bge_rxreuse_jumbo(sc, rxidx); 4406 continue; 4407 } 4408 if (bge_newbuf_jumbo(sc, rxidx) != 0) { 4409 bge_rxreuse_jumbo(sc, rxidx); 4410 if_inc_counter(ifp, IFCOUNTER_IQDROPS, 1); 4411 continue; 4412 } 4413 BGE_INC(sc->bge_jumbo, BGE_JUMBO_RX_RING_CNT); 4414 } else { 4415 stdcnt++; 4416 m = sc->bge_cdata.bge_rx_std_chain[rxidx]; 4417 if (cur_rx->bge_flags & BGE_RXBDFLAG_ERROR) { 4418 bge_rxreuse_std(sc, rxidx); 4419 continue; 4420 } 4421 if (bge_newbuf_std(sc, rxidx) != 0) { 4422 bge_rxreuse_std(sc, rxidx); 4423 if_inc_counter(ifp, IFCOUNTER_IQDROPS, 1); 4424 continue; 4425 } 4426 BGE_INC(sc->bge_std, BGE_STD_RX_RING_CNT); 4427 } 4428 4429 if_inc_counter(ifp, IFCOUNTER_IPACKETS, 1); 4430 #ifndef __NO_STRICT_ALIGNMENT 4431 /* 4432 * For architectures with strict alignment we must make sure 4433 * the payload is aligned. 4434 */ 4435 if (sc->bge_flags & BGE_FLAG_RX_ALIGNBUG) { 4436 bcopy(m->m_data, m->m_data + ETHER_ALIGN, 4437 cur_rx->bge_len); 4438 m->m_data += ETHER_ALIGN; 4439 } 4440 #endif 4441 m->m_pkthdr.len = m->m_len = cur_rx->bge_len - ETHER_CRC_LEN; 4442 m->m_pkthdr.rcvif = ifp; 4443 4444 if (if_getcapenable(ifp) & IFCAP_RXCSUM) 4445 bge_rxcsum(sc, cur_rx, m); 4446 4447 /* 4448 * If we received a packet with a vlan tag, 4449 * attach that information to the packet. 4450 */ 4451 if (have_tag) { 4452 m->m_pkthdr.ether_vtag = vlan_tag; 4453 m->m_flags |= M_VLANTAG; 4454 } 4455 4456 if (holdlck != 0) { 4457 BGE_UNLOCK(sc); 4458 if_input(ifp, m); 4459 BGE_LOCK(sc); 4460 } else 4461 if_input(ifp, m); 4462 rx_npkts++; 4463 4464 if (!(if_getdrvflags(ifp) & IFF_DRV_RUNNING)) 4465 return (rx_npkts); 4466 } 4467 4468 bus_dmamap_sync(sc->bge_cdata.bge_rx_return_ring_tag, 4469 sc->bge_cdata.bge_rx_return_ring_map, BUS_DMASYNC_PREREAD); 4470 if (stdcnt > 0) 4471 bus_dmamap_sync(sc->bge_cdata.bge_rx_std_ring_tag, 4472 sc->bge_cdata.bge_rx_std_ring_map, BUS_DMASYNC_PREWRITE); 4473 4474 if (jumbocnt > 0) 4475 bus_dmamap_sync(sc->bge_cdata.bge_rx_jumbo_ring_tag, 4476 sc->bge_cdata.bge_rx_jumbo_ring_map, BUS_DMASYNC_PREWRITE); 4477 4478 sc->bge_rx_saved_considx = rx_cons; 4479 bge_writembx(sc, BGE_MBX_RX_CONS0_LO, sc->bge_rx_saved_considx); 4480 if (stdcnt) 4481 bge_writembx(sc, BGE_MBX_RX_STD_PROD_LO, (sc->bge_std + 4482 BGE_STD_RX_RING_CNT - 1) % BGE_STD_RX_RING_CNT); 4483 if (jumbocnt) 4484 bge_writembx(sc, BGE_MBX_RX_JUMBO_PROD_LO, (sc->bge_jumbo + 4485 BGE_JUMBO_RX_RING_CNT - 1) % BGE_JUMBO_RX_RING_CNT); 4486 #ifdef notyet 4487 /* 4488 * This register wraps very quickly under heavy packet drops. 4489 * If you need correct statistics, you can enable this check. 4490 */ 4491 if (BGE_IS_5705_PLUS(sc)) 4492 if_incierrors(ifp, CSR_READ_4(sc, BGE_RXLP_LOCSTAT_IFIN_DROPS)); 4493 #endif 4494 return (rx_npkts); 4495 } 4496 4497 static void 4498 bge_rxcsum(struct bge_softc *sc, struct bge_rx_bd *cur_rx, struct mbuf *m) 4499 { 4500 4501 if (BGE_IS_5717_PLUS(sc)) { 4502 if ((cur_rx->bge_flags & BGE_RXBDFLAG_IPV6) == 0) { 4503 if (cur_rx->bge_flags & BGE_RXBDFLAG_IP_CSUM) { 4504 m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED; 4505 if ((cur_rx->bge_error_flag & 4506 BGE_RXERRFLAG_IP_CSUM_NOK) == 0) 4507 m->m_pkthdr.csum_flags |= CSUM_IP_VALID; 4508 } 4509 if (cur_rx->bge_flags & BGE_RXBDFLAG_TCP_UDP_CSUM) { 4510 m->m_pkthdr.csum_data = 4511 cur_rx->bge_tcp_udp_csum; 4512 m->m_pkthdr.csum_flags |= CSUM_DATA_VALID | 4513 CSUM_PSEUDO_HDR; 4514 } 4515 } 4516 } else { 4517 if (cur_rx->bge_flags & BGE_RXBDFLAG_IP_CSUM) { 4518 m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED; 4519 if ((cur_rx->bge_ip_csum ^ 0xFFFF) == 0) 4520 m->m_pkthdr.csum_flags |= CSUM_IP_VALID; 4521 } 4522 if (cur_rx->bge_flags & BGE_RXBDFLAG_TCP_UDP_CSUM && 4523 m->m_pkthdr.len >= ETHER_MIN_NOPAD) { 4524 m->m_pkthdr.csum_data = 4525 cur_rx->bge_tcp_udp_csum; 4526 m->m_pkthdr.csum_flags |= CSUM_DATA_VALID | 4527 CSUM_PSEUDO_HDR; 4528 } 4529 } 4530 } 4531 4532 static void 4533 bge_txeof(struct bge_softc *sc, uint16_t tx_cons) 4534 { 4535 struct bge_tx_bd *cur_tx; 4536 if_t ifp; 4537 4538 BGE_LOCK_ASSERT(sc); 4539 4540 /* Nothing to do. */ 4541 if (sc->bge_tx_saved_considx == tx_cons) 4542 return; 4543 4544 ifp = sc->bge_ifp; 4545 4546 bus_dmamap_sync(sc->bge_cdata.bge_tx_ring_tag, 4547 sc->bge_cdata.bge_tx_ring_map, BUS_DMASYNC_POSTWRITE); 4548 /* 4549 * Go through our tx ring and free mbufs for those 4550 * frames that have been sent. 4551 */ 4552 while (sc->bge_tx_saved_considx != tx_cons) { 4553 uint32_t idx; 4554 4555 idx = sc->bge_tx_saved_considx; 4556 cur_tx = &sc->bge_ldata.bge_tx_ring[idx]; 4557 if (cur_tx->bge_flags & BGE_TXBDFLAG_END) 4558 if_inc_counter(ifp, IFCOUNTER_OPACKETS, 1); 4559 if (sc->bge_cdata.bge_tx_chain[idx] != NULL) { 4560 bus_dmamap_sync(sc->bge_cdata.bge_tx_mtag, 4561 sc->bge_cdata.bge_tx_dmamap[idx], 4562 BUS_DMASYNC_POSTWRITE); 4563 bus_dmamap_unload(sc->bge_cdata.bge_tx_mtag, 4564 sc->bge_cdata.bge_tx_dmamap[idx]); 4565 m_freem(sc->bge_cdata.bge_tx_chain[idx]); 4566 sc->bge_cdata.bge_tx_chain[idx] = NULL; 4567 } 4568 sc->bge_txcnt--; 4569 BGE_INC(sc->bge_tx_saved_considx, BGE_TX_RING_CNT); 4570 } 4571 4572 if_setdrvflagbits(ifp, 0, IFF_DRV_OACTIVE); 4573 if (sc->bge_txcnt == 0) 4574 sc->bge_timer = 0; 4575 } 4576 4577 #ifdef DEVICE_POLLING 4578 static int 4579 bge_poll(if_t ifp, enum poll_cmd cmd, int count) 4580 { 4581 struct bge_softc *sc = if_getsoftc(ifp); 4582 uint16_t rx_prod, tx_cons; 4583 uint32_t statusword; 4584 int rx_npkts = 0; 4585 4586 BGE_LOCK(sc); 4587 if (!(if_getdrvflags(ifp) & IFF_DRV_RUNNING)) { 4588 BGE_UNLOCK(sc); 4589 return (rx_npkts); 4590 } 4591 4592 bus_dmamap_sync(sc->bge_cdata.bge_status_tag, 4593 sc->bge_cdata.bge_status_map, 4594 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); 4595 /* Fetch updates from the status block. */ 4596 rx_prod = sc->bge_ldata.bge_status_block->bge_idx[0].bge_rx_prod_idx; 4597 tx_cons = sc->bge_ldata.bge_status_block->bge_idx[0].bge_tx_cons_idx; 4598 4599 statusword = sc->bge_ldata.bge_status_block->bge_status; 4600 /* Clear the status so the next pass only sees the changes. */ 4601 sc->bge_ldata.bge_status_block->bge_status = 0; 4602 4603 bus_dmamap_sync(sc->bge_cdata.bge_status_tag, 4604 sc->bge_cdata.bge_status_map, 4605 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 4606 4607 /* Note link event. It will be processed by POLL_AND_CHECK_STATUS. */ 4608 if (statusword & BGE_STATFLAG_LINKSTATE_CHANGED) 4609 sc->bge_link_evt++; 4610 4611 if (cmd == POLL_AND_CHECK_STATUS) 4612 if ((sc->bge_asicrev == BGE_ASICREV_BCM5700 && 4613 sc->bge_chipid != BGE_CHIPID_BCM5700_B2) || 4614 sc->bge_link_evt || (sc->bge_flags & BGE_FLAG_TBI)) 4615 bge_link_upd(sc); 4616 4617 sc->rxcycles = count; 4618 rx_npkts = bge_rxeof(sc, rx_prod, 1); 4619 if (!(if_getdrvflags(ifp) & IFF_DRV_RUNNING)) { 4620 BGE_UNLOCK(sc); 4621 return (rx_npkts); 4622 } 4623 bge_txeof(sc, tx_cons); 4624 if (!if_sendq_empty(ifp)) 4625 bge_start_locked(ifp); 4626 4627 BGE_UNLOCK(sc); 4628 return (rx_npkts); 4629 } 4630 #endif /* DEVICE_POLLING */ 4631 4632 static int 4633 bge_msi_intr(void *arg) 4634 { 4635 struct bge_softc *sc; 4636 4637 sc = (struct bge_softc *)arg; 4638 /* 4639 * This interrupt is not shared and controller already 4640 * disabled further interrupt. 4641 */ 4642 taskqueue_enqueue(sc->bge_tq, &sc->bge_intr_task); 4643 return (FILTER_HANDLED); 4644 } 4645 4646 static void 4647 bge_intr_task(void *arg, int pending) 4648 { 4649 struct bge_softc *sc; 4650 if_t ifp; 4651 uint32_t status, status_tag; 4652 uint16_t rx_prod, tx_cons; 4653 4654 sc = (struct bge_softc *)arg; 4655 ifp = sc->bge_ifp; 4656 4657 BGE_LOCK(sc); 4658 if ((if_getdrvflags(ifp) & IFF_DRV_RUNNING) == 0) { 4659 BGE_UNLOCK(sc); 4660 return; 4661 } 4662 4663 /* Get updated status block. */ 4664 bus_dmamap_sync(sc->bge_cdata.bge_status_tag, 4665 sc->bge_cdata.bge_status_map, 4666 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); 4667 4668 /* Save producer/consumer indices. */ 4669 rx_prod = sc->bge_ldata.bge_status_block->bge_idx[0].bge_rx_prod_idx; 4670 tx_cons = sc->bge_ldata.bge_status_block->bge_idx[0].bge_tx_cons_idx; 4671 status = sc->bge_ldata.bge_status_block->bge_status; 4672 status_tag = sc->bge_ldata.bge_status_block->bge_status_tag << 24; 4673 /* Dirty the status flag. */ 4674 sc->bge_ldata.bge_status_block->bge_status = 0; 4675 bus_dmamap_sync(sc->bge_cdata.bge_status_tag, 4676 sc->bge_cdata.bge_status_map, 4677 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 4678 if ((sc->bge_flags & BGE_FLAG_TAGGED_STATUS) == 0) 4679 status_tag = 0; 4680 4681 if ((status & BGE_STATFLAG_LINKSTATE_CHANGED) != 0) 4682 bge_link_upd(sc); 4683 4684 /* Let controller work. */ 4685 bge_writembx(sc, BGE_MBX_IRQ0_LO, status_tag); 4686 4687 if (if_getdrvflags(ifp) & IFF_DRV_RUNNING && 4688 sc->bge_rx_saved_considx != rx_prod) { 4689 /* Check RX return ring producer/consumer. */ 4690 BGE_UNLOCK(sc); 4691 bge_rxeof(sc, rx_prod, 0); 4692 BGE_LOCK(sc); 4693 } 4694 if (if_getdrvflags(ifp) & IFF_DRV_RUNNING) { 4695 /* Check TX ring producer/consumer. */ 4696 bge_txeof(sc, tx_cons); 4697 if (!if_sendq_empty(ifp)) 4698 bge_start_locked(ifp); 4699 } 4700 BGE_UNLOCK(sc); 4701 } 4702 4703 static void 4704 bge_intr(void *xsc) 4705 { 4706 struct bge_softc *sc; 4707 if_t ifp; 4708 uint32_t statusword; 4709 uint16_t rx_prod, tx_cons; 4710 4711 sc = xsc; 4712 4713 BGE_LOCK(sc); 4714 4715 ifp = sc->bge_ifp; 4716 4717 #ifdef DEVICE_POLLING 4718 if (if_getcapenable(ifp) & IFCAP_POLLING) { 4719 BGE_UNLOCK(sc); 4720 return; 4721 } 4722 #endif 4723 4724 /* 4725 * Ack the interrupt by writing something to BGE_MBX_IRQ0_LO. Don't 4726 * disable interrupts by writing nonzero like we used to, since with 4727 * our current organization this just gives complications and 4728 * pessimizations for re-enabling interrupts. We used to have races 4729 * instead of the necessary complications. Disabling interrupts 4730 * would just reduce the chance of a status update while we are 4731 * running (by switching to the interrupt-mode coalescence 4732 * parameters), but this chance is already very low so it is more 4733 * efficient to get another interrupt than prevent it. 4734 * 4735 * We do the ack first to ensure another interrupt if there is a 4736 * status update after the ack. We don't check for the status 4737 * changing later because it is more efficient to get another 4738 * interrupt than prevent it, not quite as above (not checking is 4739 * a smaller optimization than not toggling the interrupt enable, 4740 * since checking doesn't involve PCI accesses and toggling require 4741 * the status check). So toggling would probably be a pessimization 4742 * even with MSI. It would only be needed for using a task queue. 4743 */ 4744 bge_writembx(sc, BGE_MBX_IRQ0_LO, 0); 4745 4746 /* 4747 * Do the mandatory PCI flush as well as get the link status. 4748 */ 4749 statusword = CSR_READ_4(sc, BGE_MAC_STS) & BGE_MACSTAT_LINK_CHANGED; 4750 4751 /* Make sure the descriptor ring indexes are coherent. */ 4752 bus_dmamap_sync(sc->bge_cdata.bge_status_tag, 4753 sc->bge_cdata.bge_status_map, 4754 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); 4755 rx_prod = sc->bge_ldata.bge_status_block->bge_idx[0].bge_rx_prod_idx; 4756 tx_cons = sc->bge_ldata.bge_status_block->bge_idx[0].bge_tx_cons_idx; 4757 sc->bge_ldata.bge_status_block->bge_status = 0; 4758 bus_dmamap_sync(sc->bge_cdata.bge_status_tag, 4759 sc->bge_cdata.bge_status_map, 4760 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 4761 4762 if ((sc->bge_asicrev == BGE_ASICREV_BCM5700 && 4763 sc->bge_chipid != BGE_CHIPID_BCM5700_B2) || 4764 statusword || sc->bge_link_evt) 4765 bge_link_upd(sc); 4766 4767 if (if_getdrvflags(ifp) & IFF_DRV_RUNNING) { 4768 /* Check RX return ring producer/consumer. */ 4769 bge_rxeof(sc, rx_prod, 1); 4770 } 4771 4772 if (if_getdrvflags(ifp) & IFF_DRV_RUNNING) { 4773 /* Check TX ring producer/consumer. */ 4774 bge_txeof(sc, tx_cons); 4775 } 4776 4777 if (if_getdrvflags(ifp) & IFF_DRV_RUNNING && 4778 !if_sendq_empty(ifp)) 4779 bge_start_locked(ifp); 4780 4781 BGE_UNLOCK(sc); 4782 } 4783 4784 static void 4785 bge_asf_driver_up(struct bge_softc *sc) 4786 { 4787 if (sc->bge_asf_mode & ASF_STACKUP) { 4788 /* Send ASF heartbeat aprox. every 2s */ 4789 if (sc->bge_asf_count) 4790 sc->bge_asf_count --; 4791 else { 4792 sc->bge_asf_count = 2; 4793 bge_writemem_ind(sc, BGE_SRAM_FW_CMD_MB, 4794 BGE_FW_CMD_DRV_ALIVE); 4795 bge_writemem_ind(sc, BGE_SRAM_FW_CMD_LEN_MB, 4); 4796 bge_writemem_ind(sc, BGE_SRAM_FW_CMD_DATA_MB, 4797 BGE_FW_HB_TIMEOUT_SEC); 4798 CSR_WRITE_4(sc, BGE_RX_CPU_EVENT, 4799 CSR_READ_4(sc, BGE_RX_CPU_EVENT) | 4800 BGE_RX_CPU_DRV_EVENT); 4801 } 4802 } 4803 } 4804 4805 static void 4806 bge_tick(void *xsc) 4807 { 4808 struct bge_softc *sc = xsc; 4809 struct mii_data *mii = NULL; 4810 4811 BGE_LOCK_ASSERT(sc); 4812 4813 /* Synchronize with possible callout reset/stop. */ 4814 if (callout_pending(&sc->bge_stat_ch) || 4815 !callout_active(&sc->bge_stat_ch)) 4816 return; 4817 4818 if (BGE_IS_5705_PLUS(sc)) 4819 bge_stats_update_regs(sc); 4820 else 4821 bge_stats_update(sc); 4822 4823 /* XXX Add APE heartbeat check here? */ 4824 4825 if ((sc->bge_flags & BGE_FLAG_TBI) == 0) { 4826 mii = device_get_softc(sc->bge_miibus); 4827 /* 4828 * Do not touch PHY if we have link up. This could break 4829 * IPMI/ASF mode or produce extra input errors 4830 * (extra errors was reported for bcm5701 & bcm5704). 4831 */ 4832 if (!sc->bge_link) 4833 mii_tick(mii); 4834 } else { 4835 /* 4836 * Since in TBI mode auto-polling can't be used we should poll 4837 * link status manually. Here we register pending link event 4838 * and trigger interrupt. 4839 */ 4840 #ifdef DEVICE_POLLING 4841 /* In polling mode we poll link state in bge_poll(). */ 4842 if (!(if_getcapenable(sc->bge_ifp) & IFCAP_POLLING)) 4843 #endif 4844 { 4845 sc->bge_link_evt++; 4846 if (sc->bge_asicrev == BGE_ASICREV_BCM5700 || 4847 sc->bge_flags & BGE_FLAG_5788) 4848 BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_INTR_SET); 4849 else 4850 BGE_SETBIT(sc, BGE_HCC_MODE, BGE_HCCMODE_COAL_NOW); 4851 } 4852 } 4853 4854 bge_asf_driver_up(sc); 4855 bge_watchdog(sc); 4856 4857 callout_reset(&sc->bge_stat_ch, hz, bge_tick, sc); 4858 } 4859 4860 static void 4861 bge_stats_update_regs(struct bge_softc *sc) 4862 { 4863 if_t ifp; 4864 struct bge_mac_stats *stats; 4865 uint32_t val; 4866 4867 ifp = sc->bge_ifp; 4868 stats = &sc->bge_mac_stats; 4869 4870 stats->ifHCOutOctets += 4871 CSR_READ_4(sc, BGE_TX_MAC_STATS_OCTETS); 4872 stats->etherStatsCollisions += 4873 CSR_READ_4(sc, BGE_TX_MAC_STATS_COLLS); 4874 stats->outXonSent += 4875 CSR_READ_4(sc, BGE_TX_MAC_STATS_XON_SENT); 4876 stats->outXoffSent += 4877 CSR_READ_4(sc, BGE_TX_MAC_STATS_XOFF_SENT); 4878 stats->dot3StatsInternalMacTransmitErrors += 4879 CSR_READ_4(sc, BGE_TX_MAC_STATS_ERRORS); 4880 stats->dot3StatsSingleCollisionFrames += 4881 CSR_READ_4(sc, BGE_TX_MAC_STATS_SINGLE_COLL); 4882 stats->dot3StatsMultipleCollisionFrames += 4883 CSR_READ_4(sc, BGE_TX_MAC_STATS_MULTI_COLL); 4884 stats->dot3StatsDeferredTransmissions += 4885 CSR_READ_4(sc, BGE_TX_MAC_STATS_DEFERRED); 4886 stats->dot3StatsExcessiveCollisions += 4887 CSR_READ_4(sc, BGE_TX_MAC_STATS_EXCESS_COLL); 4888 stats->dot3StatsLateCollisions += 4889 CSR_READ_4(sc, BGE_TX_MAC_STATS_LATE_COLL); 4890 stats->ifHCOutUcastPkts += 4891 CSR_READ_4(sc, BGE_TX_MAC_STATS_UCAST); 4892 stats->ifHCOutMulticastPkts += 4893 CSR_READ_4(sc, BGE_TX_MAC_STATS_MCAST); 4894 stats->ifHCOutBroadcastPkts += 4895 CSR_READ_4(sc, BGE_TX_MAC_STATS_BCAST); 4896 4897 stats->ifHCInOctets += 4898 CSR_READ_4(sc, BGE_RX_MAC_STATS_OCTESTS); 4899 stats->etherStatsFragments += 4900 CSR_READ_4(sc, BGE_RX_MAC_STATS_FRAGMENTS); 4901 stats->ifHCInUcastPkts += 4902 CSR_READ_4(sc, BGE_RX_MAC_STATS_UCAST); 4903 stats->ifHCInMulticastPkts += 4904 CSR_READ_4(sc, BGE_RX_MAC_STATS_MCAST); 4905 stats->ifHCInBroadcastPkts += 4906 CSR_READ_4(sc, BGE_RX_MAC_STATS_BCAST); 4907 stats->dot3StatsFCSErrors += 4908 CSR_READ_4(sc, BGE_RX_MAC_STATS_FCS_ERRORS); 4909 stats->dot3StatsAlignmentErrors += 4910 CSR_READ_4(sc, BGE_RX_MAC_STATS_ALGIN_ERRORS); 4911 stats->xonPauseFramesReceived += 4912 CSR_READ_4(sc, BGE_RX_MAC_STATS_XON_RCVD); 4913 stats->xoffPauseFramesReceived += 4914 CSR_READ_4(sc, BGE_RX_MAC_STATS_XOFF_RCVD); 4915 stats->macControlFramesReceived += 4916 CSR_READ_4(sc, BGE_RX_MAC_STATS_CTRL_RCVD); 4917 stats->xoffStateEntered += 4918 CSR_READ_4(sc, BGE_RX_MAC_STATS_XOFF_ENTERED); 4919 stats->dot3StatsFramesTooLong += 4920 CSR_READ_4(sc, BGE_RX_MAC_STATS_FRAME_TOO_LONG); 4921 stats->etherStatsJabbers += 4922 CSR_READ_4(sc, BGE_RX_MAC_STATS_JABBERS); 4923 stats->etherStatsUndersizePkts += 4924 CSR_READ_4(sc, BGE_RX_MAC_STATS_UNDERSIZE); 4925 4926 stats->FramesDroppedDueToFilters += 4927 CSR_READ_4(sc, BGE_RXLP_LOCSTAT_FILTDROP); 4928 stats->DmaWriteQueueFull += 4929 CSR_READ_4(sc, BGE_RXLP_LOCSTAT_DMA_WRQ_FULL); 4930 stats->DmaWriteHighPriQueueFull += 4931 CSR_READ_4(sc, BGE_RXLP_LOCSTAT_DMA_HPWRQ_FULL); 4932 stats->NoMoreRxBDs += 4933 CSR_READ_4(sc, BGE_RXLP_LOCSTAT_OUT_OF_BDS); 4934 /* 4935 * XXX 4936 * Unlike other controllers, BGE_RXLP_LOCSTAT_IFIN_DROPS 4937 * counter of BCM5717, BCM5718, BCM5719 A0 and BCM5720 A0 4938 * includes number of unwanted multicast frames. This comes 4939 * from silicon bug and known workaround to get rough(not 4940 * exact) counter is to enable interrupt on MBUF low water 4941 * attention. This can be accomplished by setting 4942 * BGE_HCCMODE_ATTN bit of BGE_HCC_MODE, 4943 * BGE_BMANMODE_LOMBUF_ATTN bit of BGE_BMAN_MODE and 4944 * BGE_MODECTL_FLOWCTL_ATTN_INTR bit of BGE_MODE_CTL. 4945 * However that change would generate more interrupts and 4946 * there are still possibilities of losing multiple frames 4947 * during BGE_MODECTL_FLOWCTL_ATTN_INTR interrupt handling. 4948 * Given that the workaround still would not get correct 4949 * counter I don't think it's worth to implement it. So 4950 * ignore reading the counter on controllers that have the 4951 * silicon bug. 4952 */ 4953 if (sc->bge_asicrev != BGE_ASICREV_BCM5717 && 4954 sc->bge_chipid != BGE_CHIPID_BCM5719_A0 && 4955 sc->bge_chipid != BGE_CHIPID_BCM5720_A0) 4956 stats->InputDiscards += 4957 CSR_READ_4(sc, BGE_RXLP_LOCSTAT_IFIN_DROPS); 4958 stats->InputErrors += 4959 CSR_READ_4(sc, BGE_RXLP_LOCSTAT_IFIN_ERRORS); 4960 stats->RecvThresholdHit += 4961 CSR_READ_4(sc, BGE_RXLP_LOCSTAT_RXTHRESH_HIT); 4962 4963 if (sc->bge_flags & BGE_FLAG_RDMA_BUG) { 4964 /* 4965 * If controller transmitted more than BGE_NUM_RDMA_CHANNELS 4966 * frames, it's safe to disable workaround for DMA engine's 4967 * miscalculation of TXMBUF space. 4968 */ 4969 if (stats->ifHCOutUcastPkts + stats->ifHCOutMulticastPkts + 4970 stats->ifHCOutBroadcastPkts > BGE_NUM_RDMA_CHANNELS) { 4971 val = CSR_READ_4(sc, BGE_RDMA_LSO_CRPTEN_CTRL); 4972 if (sc->bge_asicrev == BGE_ASICREV_BCM5719) 4973 val &= ~BGE_RDMA_TX_LENGTH_WA_5719; 4974 else 4975 val &= ~BGE_RDMA_TX_LENGTH_WA_5720; 4976 CSR_WRITE_4(sc, BGE_RDMA_LSO_CRPTEN_CTRL, val); 4977 sc->bge_flags &= ~BGE_FLAG_RDMA_BUG; 4978 } 4979 } 4980 } 4981 4982 static void 4983 bge_stats_clear_regs(struct bge_softc *sc) 4984 { 4985 4986 CSR_READ_4(sc, BGE_TX_MAC_STATS_OCTETS); 4987 CSR_READ_4(sc, BGE_TX_MAC_STATS_COLLS); 4988 CSR_READ_4(sc, BGE_TX_MAC_STATS_XON_SENT); 4989 CSR_READ_4(sc, BGE_TX_MAC_STATS_XOFF_SENT); 4990 CSR_READ_4(sc, BGE_TX_MAC_STATS_ERRORS); 4991 CSR_READ_4(sc, BGE_TX_MAC_STATS_SINGLE_COLL); 4992 CSR_READ_4(sc, BGE_TX_MAC_STATS_MULTI_COLL); 4993 CSR_READ_4(sc, BGE_TX_MAC_STATS_DEFERRED); 4994 CSR_READ_4(sc, BGE_TX_MAC_STATS_EXCESS_COLL); 4995 CSR_READ_4(sc, BGE_TX_MAC_STATS_LATE_COLL); 4996 CSR_READ_4(sc, BGE_TX_MAC_STATS_UCAST); 4997 CSR_READ_4(sc, BGE_TX_MAC_STATS_MCAST); 4998 CSR_READ_4(sc, BGE_TX_MAC_STATS_BCAST); 4999 5000 CSR_READ_4(sc, BGE_RX_MAC_STATS_OCTESTS); 5001 CSR_READ_4(sc, BGE_RX_MAC_STATS_FRAGMENTS); 5002 CSR_READ_4(sc, BGE_RX_MAC_STATS_UCAST); 5003 CSR_READ_4(sc, BGE_RX_MAC_STATS_MCAST); 5004 CSR_READ_4(sc, BGE_RX_MAC_STATS_BCAST); 5005 CSR_READ_4(sc, BGE_RX_MAC_STATS_FCS_ERRORS); 5006 CSR_READ_4(sc, BGE_RX_MAC_STATS_ALGIN_ERRORS); 5007 CSR_READ_4(sc, BGE_RX_MAC_STATS_XON_RCVD); 5008 CSR_READ_4(sc, BGE_RX_MAC_STATS_XOFF_RCVD); 5009 CSR_READ_4(sc, BGE_RX_MAC_STATS_CTRL_RCVD); 5010 CSR_READ_4(sc, BGE_RX_MAC_STATS_XOFF_ENTERED); 5011 CSR_READ_4(sc, BGE_RX_MAC_STATS_FRAME_TOO_LONG); 5012 CSR_READ_4(sc, BGE_RX_MAC_STATS_JABBERS); 5013 CSR_READ_4(sc, BGE_RX_MAC_STATS_UNDERSIZE); 5014 5015 CSR_READ_4(sc, BGE_RXLP_LOCSTAT_FILTDROP); 5016 CSR_READ_4(sc, BGE_RXLP_LOCSTAT_DMA_WRQ_FULL); 5017 CSR_READ_4(sc, BGE_RXLP_LOCSTAT_DMA_HPWRQ_FULL); 5018 CSR_READ_4(sc, BGE_RXLP_LOCSTAT_OUT_OF_BDS); 5019 CSR_READ_4(sc, BGE_RXLP_LOCSTAT_IFIN_DROPS); 5020 CSR_READ_4(sc, BGE_RXLP_LOCSTAT_IFIN_ERRORS); 5021 CSR_READ_4(sc, BGE_RXLP_LOCSTAT_RXTHRESH_HIT); 5022 } 5023 5024 static void 5025 bge_stats_update(struct bge_softc *sc) 5026 { 5027 if_t ifp; 5028 bus_size_t stats; 5029 uint32_t cnt; /* current register value */ 5030 5031 ifp = sc->bge_ifp; 5032 5033 stats = BGE_MEMWIN_START + BGE_STATS_BLOCK; 5034 5035 #define READ_STAT(sc, stats, stat) \ 5036 CSR_READ_4(sc, stats + offsetof(struct bge_stats, stat)) 5037 5038 cnt = READ_STAT(sc, stats, txstats.etherStatsCollisions.bge_addr_lo); 5039 if_inc_counter(ifp, IFCOUNTER_COLLISIONS, cnt - sc->bge_tx_collisions); 5040 sc->bge_tx_collisions = cnt; 5041 5042 cnt = READ_STAT(sc, stats, nicNoMoreRxBDs.bge_addr_lo); 5043 if_inc_counter(ifp, IFCOUNTER_IERRORS, cnt - sc->bge_rx_nobds); 5044 sc->bge_rx_nobds = cnt; 5045 cnt = READ_STAT(sc, stats, ifInErrors.bge_addr_lo); 5046 if_inc_counter(ifp, IFCOUNTER_IERRORS, cnt - sc->bge_rx_inerrs); 5047 sc->bge_rx_inerrs = cnt; 5048 cnt = READ_STAT(sc, stats, ifInDiscards.bge_addr_lo); 5049 if_inc_counter(ifp, IFCOUNTER_IERRORS, cnt - sc->bge_rx_discards); 5050 sc->bge_rx_discards = cnt; 5051 5052 cnt = READ_STAT(sc, stats, txstats.ifOutDiscards.bge_addr_lo); 5053 if_inc_counter(ifp, IFCOUNTER_OERRORS, cnt - sc->bge_tx_discards); 5054 sc->bge_tx_discards = cnt; 5055 5056 #undef READ_STAT 5057 } 5058 5059 /* 5060 * Pad outbound frame to ETHER_MIN_NOPAD for an unusual reason. 5061 * The bge hardware will pad out Tx runts to ETHER_MIN_NOPAD, 5062 * but when such padded frames employ the bge IP/TCP checksum offload, 5063 * the hardware checksum assist gives incorrect results (possibly 5064 * from incorporating its own padding into the UDP/TCP checksum; who knows). 5065 * If we pad such runts with zeros, the onboard checksum comes out correct. 5066 */ 5067 static __inline int 5068 bge_cksum_pad(struct mbuf *m) 5069 { 5070 int padlen = ETHER_MIN_NOPAD - m->m_pkthdr.len; 5071 struct mbuf *last; 5072 5073 /* If there's only the packet-header and we can pad there, use it. */ 5074 if (m->m_pkthdr.len == m->m_len && M_WRITABLE(m) && 5075 M_TRAILINGSPACE(m) >= padlen) { 5076 last = m; 5077 } else { 5078 /* 5079 * Walk packet chain to find last mbuf. We will either 5080 * pad there, or append a new mbuf and pad it. 5081 */ 5082 for (last = m; last->m_next != NULL; last = last->m_next); 5083 if (!(M_WRITABLE(last) && M_TRAILINGSPACE(last) >= padlen)) { 5084 /* Allocate new empty mbuf, pad it. Compact later. */ 5085 struct mbuf *n; 5086 5087 MGET(n, M_NOWAIT, MT_DATA); 5088 if (n == NULL) 5089 return (ENOBUFS); 5090 n->m_len = 0; 5091 last->m_next = n; 5092 last = n; 5093 } 5094 } 5095 5096 /* Now zero the pad area, to avoid the bge cksum-assist bug. */ 5097 memset(mtod(last, caddr_t) + last->m_len, 0, padlen); 5098 last->m_len += padlen; 5099 m->m_pkthdr.len += padlen; 5100 5101 return (0); 5102 } 5103 5104 static struct mbuf * 5105 bge_check_short_dma(struct mbuf *m) 5106 { 5107 struct mbuf *n; 5108 int found; 5109 5110 /* 5111 * If device receive two back-to-back send BDs with less than 5112 * or equal to 8 total bytes then the device may hang. The two 5113 * back-to-back send BDs must in the same frame for this failure 5114 * to occur. Scan mbuf chains and see whether two back-to-back 5115 * send BDs are there. If this is the case, allocate new mbuf 5116 * and copy the frame to workaround the silicon bug. 5117 */ 5118 for (n = m, found = 0; n != NULL; n = n->m_next) { 5119 if (n->m_len < 8) { 5120 found++; 5121 if (found > 1) 5122 break; 5123 continue; 5124 } 5125 found = 0; 5126 } 5127 5128 if (found > 1) { 5129 n = m_defrag(m, M_NOWAIT); 5130 if (n == NULL) 5131 m_freem(m); 5132 } else 5133 n = m; 5134 return (n); 5135 } 5136 5137 static struct mbuf * 5138 bge_setup_tso(struct bge_softc *sc, struct mbuf *m, uint16_t *mss, 5139 uint16_t *flags) 5140 { 5141 struct ip *ip; 5142 struct tcphdr *tcp; 5143 struct mbuf *n; 5144 uint16_t hlen; 5145 uint32_t poff; 5146 5147 if (M_WRITABLE(m) == 0) { 5148 /* Get a writable copy. */ 5149 n = m_dup(m, M_NOWAIT); 5150 m_freem(m); 5151 if (n == NULL) 5152 return (NULL); 5153 m = n; 5154 } 5155 m = m_pullup(m, sizeof(struct ether_header) + sizeof(struct ip)); 5156 if (m == NULL) 5157 return (NULL); 5158 ip = (struct ip *)(mtod(m, char *) + sizeof(struct ether_header)); 5159 poff = sizeof(struct ether_header) + (ip->ip_hl << 2); 5160 m = m_pullup(m, poff + sizeof(struct tcphdr)); 5161 if (m == NULL) 5162 return (NULL); 5163 tcp = (struct tcphdr *)(mtod(m, char *) + poff); 5164 m = m_pullup(m, poff + (tcp->th_off << 2)); 5165 if (m == NULL) 5166 return (NULL); 5167 /* 5168 * It seems controller doesn't modify IP length and TCP pseudo 5169 * checksum. These checksum computed by upper stack should be 0. 5170 */ 5171 *mss = m->m_pkthdr.tso_segsz; 5172 ip = (struct ip *)(mtod(m, char *) + sizeof(struct ether_header)); 5173 ip->ip_sum = 0; 5174 ip->ip_len = htons(*mss + (ip->ip_hl << 2) + (tcp->th_off << 2)); 5175 /* Clear pseudo checksum computed by TCP stack. */ 5176 tcp = (struct tcphdr *)(mtod(m, char *) + poff); 5177 tcp->th_sum = 0; 5178 /* 5179 * Broadcom controllers uses different descriptor format for 5180 * TSO depending on ASIC revision. Due to TSO-capable firmware 5181 * license issue and lower performance of firmware based TSO 5182 * we only support hardware based TSO. 5183 */ 5184 /* Calculate header length, incl. TCP/IP options, in 32 bit units. */ 5185 hlen = ((ip->ip_hl << 2) + (tcp->th_off << 2)) >> 2; 5186 if (sc->bge_flags & BGE_FLAG_TSO3) { 5187 /* 5188 * For BCM5717 and newer controllers, hardware based TSO 5189 * uses the 14 lower bits of the bge_mss field to store the 5190 * MSS and the upper 2 bits to store the lowest 2 bits of 5191 * the IP/TCP header length. The upper 6 bits of the header 5192 * length are stored in the bge_flags[14:10,4] field. Jumbo 5193 * frames are supported. 5194 */ 5195 *mss |= ((hlen & 0x3) << 14); 5196 *flags |= ((hlen & 0xF8) << 7) | ((hlen & 0x4) << 2); 5197 } else { 5198 /* 5199 * For BCM5755 and newer controllers, hardware based TSO uses 5200 * the lower 11 bits to store the MSS and the upper 5 bits to 5201 * store the IP/TCP header length. Jumbo frames are not 5202 * supported. 5203 */ 5204 *mss |= (hlen << 11); 5205 } 5206 return (m); 5207 } 5208 5209 /* 5210 * Encapsulate an mbuf chain in the tx ring by coupling the mbuf data 5211 * pointers to descriptors. 5212 */ 5213 static int 5214 bge_encap(struct bge_softc *sc, struct mbuf **m_head, uint32_t *txidx) 5215 { 5216 bus_dma_segment_t segs[BGE_NSEG_NEW]; 5217 bus_dmamap_t map; 5218 struct bge_tx_bd *d; 5219 struct mbuf *m = *m_head; 5220 uint32_t idx = *txidx; 5221 uint16_t csum_flags, mss, vlan_tag; 5222 int nsegs, i, error; 5223 5224 csum_flags = 0; 5225 mss = 0; 5226 vlan_tag = 0; 5227 if ((sc->bge_flags & BGE_FLAG_SHORT_DMA_BUG) != 0 && 5228 m->m_next != NULL) { 5229 *m_head = bge_check_short_dma(m); 5230 if (*m_head == NULL) 5231 return (ENOBUFS); 5232 m = *m_head; 5233 } 5234 if ((m->m_pkthdr.csum_flags & CSUM_TSO) != 0) { 5235 *m_head = m = bge_setup_tso(sc, m, &mss, &csum_flags); 5236 if (*m_head == NULL) 5237 return (ENOBUFS); 5238 csum_flags |= BGE_TXBDFLAG_CPU_PRE_DMA | 5239 BGE_TXBDFLAG_CPU_POST_DMA; 5240 } else if ((m->m_pkthdr.csum_flags & sc->bge_csum_features) != 0) { 5241 if (m->m_pkthdr.csum_flags & CSUM_IP) 5242 csum_flags |= BGE_TXBDFLAG_IP_CSUM; 5243 if (m->m_pkthdr.csum_flags & (CSUM_TCP | CSUM_UDP)) { 5244 csum_flags |= BGE_TXBDFLAG_TCP_UDP_CSUM; 5245 if (m->m_pkthdr.len < ETHER_MIN_NOPAD && 5246 (error = bge_cksum_pad(m)) != 0) { 5247 m_freem(m); 5248 *m_head = NULL; 5249 return (error); 5250 } 5251 } 5252 } 5253 5254 if ((m->m_pkthdr.csum_flags & CSUM_TSO) == 0) { 5255 if (sc->bge_flags & BGE_FLAG_JUMBO_FRAME && 5256 m->m_pkthdr.len > ETHER_MAX_LEN) 5257 csum_flags |= BGE_TXBDFLAG_JUMBO_FRAME; 5258 if (sc->bge_forced_collapse > 0 && 5259 (sc->bge_flags & BGE_FLAG_PCIE) != 0 && m->m_next != NULL) { 5260 /* 5261 * Forcedly collapse mbuf chains to overcome hardware 5262 * limitation which only support a single outstanding 5263 * DMA read operation. 5264 */ 5265 if (sc->bge_forced_collapse == 1) 5266 m = m_defrag(m, M_NOWAIT); 5267 else 5268 m = m_collapse(m, M_NOWAIT, 5269 sc->bge_forced_collapse); 5270 if (m == NULL) 5271 m = *m_head; 5272 *m_head = m; 5273 } 5274 } 5275 5276 map = sc->bge_cdata.bge_tx_dmamap[idx]; 5277 error = bus_dmamap_load_mbuf_sg(sc->bge_cdata.bge_tx_mtag, map, m, segs, 5278 &nsegs, BUS_DMA_NOWAIT); 5279 if (error == EFBIG) { 5280 m = m_collapse(m, M_NOWAIT, BGE_NSEG_NEW); 5281 if (m == NULL) { 5282 m_freem(*m_head); 5283 *m_head = NULL; 5284 return (ENOBUFS); 5285 } 5286 *m_head = m; 5287 error = bus_dmamap_load_mbuf_sg(sc->bge_cdata.bge_tx_mtag, map, 5288 m, segs, &nsegs, BUS_DMA_NOWAIT); 5289 if (error) { 5290 m_freem(m); 5291 *m_head = NULL; 5292 return (error); 5293 } 5294 } else if (error != 0) 5295 return (error); 5296 5297 /* Check if we have enough free send BDs. */ 5298 if (sc->bge_txcnt + nsegs >= BGE_TX_RING_CNT) { 5299 bus_dmamap_unload(sc->bge_cdata.bge_tx_mtag, map); 5300 return (ENOBUFS); 5301 } 5302 5303 bus_dmamap_sync(sc->bge_cdata.bge_tx_mtag, map, BUS_DMASYNC_PREWRITE); 5304 5305 if (m->m_flags & M_VLANTAG) { 5306 csum_flags |= BGE_TXBDFLAG_VLAN_TAG; 5307 vlan_tag = m->m_pkthdr.ether_vtag; 5308 } 5309 5310 if (sc->bge_asicrev == BGE_ASICREV_BCM5762 && 5311 (m->m_pkthdr.csum_flags & CSUM_TSO) != 0) { 5312 /* 5313 * 5725 family of devices corrupts TSO packets when TSO DMA 5314 * buffers cross into regions which are within MSS bytes of 5315 * a 4GB boundary. If we encounter the condition, drop the 5316 * packet. 5317 */ 5318 for (i = 0; ; i++) { 5319 d = &sc->bge_ldata.bge_tx_ring[idx]; 5320 d->bge_addr.bge_addr_lo = BGE_ADDR_LO(segs[i].ds_addr); 5321 d->bge_addr.bge_addr_hi = BGE_ADDR_HI(segs[i].ds_addr); 5322 d->bge_len = segs[i].ds_len; 5323 if (d->bge_addr.bge_addr_lo + segs[i].ds_len + mss < 5324 d->bge_addr.bge_addr_lo) 5325 break; 5326 d->bge_flags = csum_flags; 5327 d->bge_vlan_tag = vlan_tag; 5328 d->bge_mss = mss; 5329 if (i == nsegs - 1) 5330 break; 5331 BGE_INC(idx, BGE_TX_RING_CNT); 5332 } 5333 if (i != nsegs - 1) { 5334 bus_dmamap_sync(sc->bge_cdata.bge_tx_mtag, map, 5335 BUS_DMASYNC_POSTWRITE); 5336 bus_dmamap_unload(sc->bge_cdata.bge_tx_mtag, map); 5337 m_freem(*m_head); 5338 *m_head = NULL; 5339 return (EIO); 5340 } 5341 } else { 5342 for (i = 0; ; i++) { 5343 d = &sc->bge_ldata.bge_tx_ring[idx]; 5344 d->bge_addr.bge_addr_lo = BGE_ADDR_LO(segs[i].ds_addr); 5345 d->bge_addr.bge_addr_hi = BGE_ADDR_HI(segs[i].ds_addr); 5346 d->bge_len = segs[i].ds_len; 5347 d->bge_flags = csum_flags; 5348 d->bge_vlan_tag = vlan_tag; 5349 d->bge_mss = mss; 5350 if (i == nsegs - 1) 5351 break; 5352 BGE_INC(idx, BGE_TX_RING_CNT); 5353 } 5354 } 5355 5356 /* Mark the last segment as end of packet... */ 5357 d->bge_flags |= BGE_TXBDFLAG_END; 5358 5359 /* 5360 * Insure that the map for this transmission 5361 * is placed at the array index of the last descriptor 5362 * in this chain. 5363 */ 5364 sc->bge_cdata.bge_tx_dmamap[*txidx] = sc->bge_cdata.bge_tx_dmamap[idx]; 5365 sc->bge_cdata.bge_tx_dmamap[idx] = map; 5366 sc->bge_cdata.bge_tx_chain[idx] = m; 5367 sc->bge_txcnt += nsegs; 5368 5369 BGE_INC(idx, BGE_TX_RING_CNT); 5370 *txidx = idx; 5371 5372 return (0); 5373 } 5374 5375 /* 5376 * Main transmit routine. To avoid having to do mbuf copies, we put pointers 5377 * to the mbuf data regions directly in the transmit descriptors. 5378 */ 5379 static void 5380 bge_start_locked(if_t ifp) 5381 { 5382 struct bge_softc *sc; 5383 struct mbuf *m_head; 5384 uint32_t prodidx; 5385 int count; 5386 5387 sc = if_getsoftc(ifp); 5388 BGE_LOCK_ASSERT(sc); 5389 5390 if (!sc->bge_link || 5391 (if_getdrvflags(ifp) & (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)) != 5392 IFF_DRV_RUNNING) 5393 return; 5394 5395 prodidx = sc->bge_tx_prodidx; 5396 5397 for (count = 0; !if_sendq_empty(ifp);) { 5398 if (sc->bge_txcnt > BGE_TX_RING_CNT - 16) { 5399 if_setdrvflagbits(ifp, IFF_DRV_OACTIVE, 0); 5400 break; 5401 } 5402 m_head = if_dequeue(ifp); 5403 if (m_head == NULL) 5404 break; 5405 5406 /* 5407 * Pack the data into the transmit ring. If we 5408 * don't have room, set the OACTIVE flag and wait 5409 * for the NIC to drain the ring. 5410 */ 5411 if (bge_encap(sc, &m_head, &prodidx)) { 5412 if (m_head == NULL) 5413 break; 5414 if_sendq_prepend(ifp, m_head); 5415 if_setdrvflagbits(ifp, IFF_DRV_OACTIVE, 0); 5416 break; 5417 } 5418 ++count; 5419 5420 /* 5421 * If there's a BPF listener, bounce a copy of this frame 5422 * to him. 5423 */ 5424 if_bpfmtap(ifp, m_head); 5425 } 5426 5427 if (count > 0) 5428 bge_start_tx(sc, prodidx); 5429 } 5430 5431 static void 5432 bge_start_tx(struct bge_softc *sc, uint32_t prodidx) 5433 { 5434 5435 bus_dmamap_sync(sc->bge_cdata.bge_tx_ring_tag, 5436 sc->bge_cdata.bge_tx_ring_map, BUS_DMASYNC_PREWRITE); 5437 /* Transmit. */ 5438 bge_writembx(sc, BGE_MBX_TX_HOST_PROD0_LO, prodidx); 5439 /* 5700 b2 errata */ 5440 if (sc->bge_chiprev == BGE_CHIPREV_5700_BX) 5441 bge_writembx(sc, BGE_MBX_TX_HOST_PROD0_LO, prodidx); 5442 5443 sc->bge_tx_prodidx = prodidx; 5444 5445 /* Set a timeout in case the chip goes out to lunch. */ 5446 sc->bge_timer = BGE_TX_TIMEOUT; 5447 } 5448 5449 /* 5450 * Main transmit routine. To avoid having to do mbuf copies, we put pointers 5451 * to the mbuf data regions directly in the transmit descriptors. 5452 */ 5453 static void 5454 bge_start(if_t ifp) 5455 { 5456 struct bge_softc *sc; 5457 5458 sc = if_getsoftc(ifp); 5459 BGE_LOCK(sc); 5460 bge_start_locked(ifp); 5461 BGE_UNLOCK(sc); 5462 } 5463 5464 static void 5465 bge_init_locked(struct bge_softc *sc) 5466 { 5467 if_t ifp; 5468 uint16_t *m; 5469 uint32_t mode; 5470 5471 BGE_LOCK_ASSERT(sc); 5472 5473 ifp = sc->bge_ifp; 5474 5475 if (if_getdrvflags(ifp) & IFF_DRV_RUNNING) 5476 return; 5477 5478 /* Cancel pending I/O and flush buffers. */ 5479 bge_stop(sc); 5480 5481 bge_stop_fw(sc); 5482 bge_sig_pre_reset(sc, BGE_RESET_START); 5483 bge_reset(sc); 5484 bge_sig_legacy(sc, BGE_RESET_START); 5485 bge_sig_post_reset(sc, BGE_RESET_START); 5486 5487 bge_chipinit(sc); 5488 5489 /* 5490 * Init the various state machines, ring 5491 * control blocks and firmware. 5492 */ 5493 if (bge_blockinit(sc)) { 5494 device_printf(sc->bge_dev, "initialization failure\n"); 5495 return; 5496 } 5497 5498 ifp = sc->bge_ifp; 5499 5500 /* Specify MTU. */ 5501 CSR_WRITE_4(sc, BGE_RX_MTU, if_getmtu(ifp) + 5502 ETHER_HDR_LEN + ETHER_CRC_LEN + 5503 (if_getcapenable(ifp) & IFCAP_VLAN_MTU ? ETHER_VLAN_ENCAP_LEN : 0)); 5504 5505 /* Load our MAC address. */ 5506 m = (uint16_t *)IF_LLADDR(sc->bge_ifp); 5507 CSR_WRITE_4(sc, BGE_MAC_ADDR1_LO, htons(m[0])); 5508 CSR_WRITE_4(sc, BGE_MAC_ADDR1_HI, (htons(m[1]) << 16) | htons(m[2])); 5509 5510 /* Program promiscuous mode. */ 5511 bge_setpromisc(sc); 5512 5513 /* Program multicast filter. */ 5514 bge_setmulti(sc); 5515 5516 /* Program VLAN tag stripping. */ 5517 bge_setvlan(sc); 5518 5519 /* Override UDP checksum offloading. */ 5520 if (sc->bge_forced_udpcsum == 0) 5521 sc->bge_csum_features &= ~CSUM_UDP; 5522 else 5523 sc->bge_csum_features |= CSUM_UDP; 5524 if (if_getcapabilities(ifp) & IFCAP_TXCSUM && 5525 if_getcapenable(ifp) & IFCAP_TXCSUM) { 5526 if_sethwassistbits(ifp, 0, (BGE_CSUM_FEATURES | CSUM_UDP)); 5527 if_sethwassistbits(ifp, sc->bge_csum_features, 0); 5528 } 5529 5530 /* Init RX ring. */ 5531 if (bge_init_rx_ring_std(sc) != 0) { 5532 device_printf(sc->bge_dev, "no memory for std Rx buffers.\n"); 5533 bge_stop(sc); 5534 return; 5535 } 5536 5537 /* 5538 * Workaround for a bug in 5705 ASIC rev A0. Poll the NIC's 5539 * memory to insure that the chip has in fact read the first 5540 * entry of the ring. 5541 */ 5542 if (sc->bge_chipid == BGE_CHIPID_BCM5705_A0) { 5543 uint32_t v, i; 5544 for (i = 0; i < 10; i++) { 5545 DELAY(20); 5546 v = bge_readmem_ind(sc, BGE_STD_RX_RINGS + 8); 5547 if (v == (MCLBYTES - ETHER_ALIGN)) 5548 break; 5549 } 5550 if (i == 10) 5551 device_printf (sc->bge_dev, 5552 "5705 A0 chip failed to load RX ring\n"); 5553 } 5554 5555 /* Init jumbo RX ring. */ 5556 if (BGE_IS_JUMBO_CAPABLE(sc) && 5557 if_getmtu(ifp) + ETHER_HDR_LEN + ETHER_CRC_LEN + 5558 ETHER_VLAN_ENCAP_LEN > (MCLBYTES - ETHER_ALIGN)) { 5559 if (bge_init_rx_ring_jumbo(sc) != 0) { 5560 device_printf(sc->bge_dev, 5561 "no memory for jumbo Rx buffers.\n"); 5562 bge_stop(sc); 5563 return; 5564 } 5565 } 5566 5567 /* Init our RX return ring index. */ 5568 sc->bge_rx_saved_considx = 0; 5569 5570 /* Init our RX/TX stat counters. */ 5571 sc->bge_rx_discards = sc->bge_tx_discards = sc->bge_tx_collisions = 0; 5572 5573 /* Init TX ring. */ 5574 bge_init_tx_ring(sc); 5575 5576 /* Enable TX MAC state machine lockup fix. */ 5577 mode = CSR_READ_4(sc, BGE_TX_MODE); 5578 if (BGE_IS_5755_PLUS(sc) || sc->bge_asicrev == BGE_ASICREV_BCM5906) 5579 mode |= BGE_TXMODE_MBUF_LOCKUP_FIX; 5580 if (sc->bge_asicrev == BGE_ASICREV_BCM5720 || 5581 sc->bge_asicrev == BGE_ASICREV_BCM5762) { 5582 mode &= ~(BGE_TXMODE_JMB_FRM_LEN | BGE_TXMODE_CNT_DN_MODE); 5583 mode |= CSR_READ_4(sc, BGE_TX_MODE) & 5584 (BGE_TXMODE_JMB_FRM_LEN | BGE_TXMODE_CNT_DN_MODE); 5585 } 5586 /* Turn on transmitter. */ 5587 CSR_WRITE_4(sc, BGE_TX_MODE, mode | BGE_TXMODE_ENABLE); 5588 DELAY(100); 5589 5590 /* Turn on receiver. */ 5591 mode = CSR_READ_4(sc, BGE_RX_MODE); 5592 if (BGE_IS_5755_PLUS(sc)) 5593 mode |= BGE_RXMODE_IPV6_ENABLE; 5594 if (sc->bge_asicrev == BGE_ASICREV_BCM5762) 5595 mode |= BGE_RXMODE_IPV4_FRAG_FIX; 5596 CSR_WRITE_4(sc,BGE_RX_MODE, mode | BGE_RXMODE_ENABLE); 5597 DELAY(10); 5598 5599 /* 5600 * Set the number of good frames to receive after RX MBUF 5601 * Low Watermark has been reached. After the RX MAC receives 5602 * this number of frames, it will drop subsequent incoming 5603 * frames until the MBUF High Watermark is reached. 5604 */ 5605 if (BGE_IS_57765_PLUS(sc)) 5606 CSR_WRITE_4(sc, BGE_MAX_RX_FRAME_LOWAT, 1); 5607 else 5608 CSR_WRITE_4(sc, BGE_MAX_RX_FRAME_LOWAT, 2); 5609 5610 /* Clear MAC statistics. */ 5611 if (BGE_IS_5705_PLUS(sc)) 5612 bge_stats_clear_regs(sc); 5613 5614 /* Tell firmware we're alive. */ 5615 BGE_SETBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP); 5616 5617 #ifdef DEVICE_POLLING 5618 /* Disable interrupts if we are polling. */ 5619 if (if_getcapenable(ifp) & IFCAP_POLLING) { 5620 BGE_SETBIT(sc, BGE_PCI_MISC_CTL, 5621 BGE_PCIMISCCTL_MASK_PCI_INTR); 5622 bge_writembx(sc, BGE_MBX_IRQ0_LO, 1); 5623 } else 5624 #endif 5625 5626 /* Enable host interrupts. */ 5627 { 5628 BGE_SETBIT(sc, BGE_PCI_MISC_CTL, BGE_PCIMISCCTL_CLEAR_INTA); 5629 BGE_CLRBIT(sc, BGE_PCI_MISC_CTL, BGE_PCIMISCCTL_MASK_PCI_INTR); 5630 bge_writembx(sc, BGE_MBX_IRQ0_LO, 0); 5631 } 5632 5633 if_setdrvflagbits(ifp, IFF_DRV_RUNNING, 0); 5634 if_setdrvflagbits(ifp, 0, IFF_DRV_OACTIVE); 5635 5636 bge_ifmedia_upd_locked(ifp); 5637 5638 callout_reset(&sc->bge_stat_ch, hz, bge_tick, sc); 5639 } 5640 5641 static void 5642 bge_init(void *xsc) 5643 { 5644 struct bge_softc *sc = xsc; 5645 5646 BGE_LOCK(sc); 5647 bge_init_locked(sc); 5648 BGE_UNLOCK(sc); 5649 } 5650 5651 /* 5652 * Set media options. 5653 */ 5654 static int 5655 bge_ifmedia_upd(if_t ifp) 5656 { 5657 struct bge_softc *sc = if_getsoftc(ifp); 5658 int res; 5659 5660 BGE_LOCK(sc); 5661 res = bge_ifmedia_upd_locked(ifp); 5662 BGE_UNLOCK(sc); 5663 5664 return (res); 5665 } 5666 5667 static int 5668 bge_ifmedia_upd_locked(if_t ifp) 5669 { 5670 struct bge_softc *sc = if_getsoftc(ifp); 5671 struct mii_data *mii; 5672 struct mii_softc *miisc; 5673 struct ifmedia *ifm; 5674 5675 BGE_LOCK_ASSERT(sc); 5676 5677 ifm = &sc->bge_ifmedia; 5678 5679 /* If this is a 1000baseX NIC, enable the TBI port. */ 5680 if (sc->bge_flags & BGE_FLAG_TBI) { 5681 if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER) 5682 return (EINVAL); 5683 switch(IFM_SUBTYPE(ifm->ifm_media)) { 5684 case IFM_AUTO: 5685 /* 5686 * The BCM5704 ASIC appears to have a special 5687 * mechanism for programming the autoneg 5688 * advertisement registers in TBI mode. 5689 */ 5690 if (sc->bge_asicrev == BGE_ASICREV_BCM5704) { 5691 uint32_t sgdig; 5692 sgdig = CSR_READ_4(sc, BGE_SGDIG_STS); 5693 if (sgdig & BGE_SGDIGSTS_DONE) { 5694 CSR_WRITE_4(sc, BGE_TX_TBI_AUTONEG, 0); 5695 sgdig = CSR_READ_4(sc, BGE_SGDIG_CFG); 5696 sgdig |= BGE_SGDIGCFG_AUTO | 5697 BGE_SGDIGCFG_PAUSE_CAP | 5698 BGE_SGDIGCFG_ASYM_PAUSE; 5699 CSR_WRITE_4(sc, BGE_SGDIG_CFG, 5700 sgdig | BGE_SGDIGCFG_SEND); 5701 DELAY(5); 5702 CSR_WRITE_4(sc, BGE_SGDIG_CFG, sgdig); 5703 } 5704 } 5705 break; 5706 case IFM_1000_SX: 5707 if ((ifm->ifm_media & IFM_GMASK) == IFM_FDX) { 5708 BGE_CLRBIT(sc, BGE_MAC_MODE, 5709 BGE_MACMODE_HALF_DUPLEX); 5710 } else { 5711 BGE_SETBIT(sc, BGE_MAC_MODE, 5712 BGE_MACMODE_HALF_DUPLEX); 5713 } 5714 DELAY(40); 5715 break; 5716 default: 5717 return (EINVAL); 5718 } 5719 return (0); 5720 } 5721 5722 sc->bge_link_evt++; 5723 mii = device_get_softc(sc->bge_miibus); 5724 LIST_FOREACH(miisc, &mii->mii_phys, mii_list) 5725 PHY_RESET(miisc); 5726 mii_mediachg(mii); 5727 5728 /* 5729 * Force an interrupt so that we will call bge_link_upd 5730 * if needed and clear any pending link state attention. 5731 * Without this we are not getting any further interrupts 5732 * for link state changes and thus will not UP the link and 5733 * not be able to send in bge_start_locked. The only 5734 * way to get things working was to receive a packet and 5735 * get an RX intr. 5736 * bge_tick should help for fiber cards and we might not 5737 * need to do this here if BGE_FLAG_TBI is set but as 5738 * we poll for fiber anyway it should not harm. 5739 */ 5740 if (sc->bge_asicrev == BGE_ASICREV_BCM5700 || 5741 sc->bge_flags & BGE_FLAG_5788) 5742 BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_INTR_SET); 5743 else 5744 BGE_SETBIT(sc, BGE_HCC_MODE, BGE_HCCMODE_COAL_NOW); 5745 5746 return (0); 5747 } 5748 5749 /* 5750 * Report current media status. 5751 */ 5752 static void 5753 bge_ifmedia_sts(if_t ifp, struct ifmediareq *ifmr) 5754 { 5755 struct bge_softc *sc = if_getsoftc(ifp); 5756 struct mii_data *mii; 5757 5758 BGE_LOCK(sc); 5759 5760 if ((if_getflags(ifp) & IFF_UP) == 0) { 5761 BGE_UNLOCK(sc); 5762 return; 5763 } 5764 if (sc->bge_flags & BGE_FLAG_TBI) { 5765 ifmr->ifm_status = IFM_AVALID; 5766 ifmr->ifm_active = IFM_ETHER; 5767 if (CSR_READ_4(sc, BGE_MAC_STS) & 5768 BGE_MACSTAT_TBI_PCS_SYNCHED) 5769 ifmr->ifm_status |= IFM_ACTIVE; 5770 else { 5771 ifmr->ifm_active |= IFM_NONE; 5772 BGE_UNLOCK(sc); 5773 return; 5774 } 5775 ifmr->ifm_active |= IFM_1000_SX; 5776 if (CSR_READ_4(sc, BGE_MAC_MODE) & BGE_MACMODE_HALF_DUPLEX) 5777 ifmr->ifm_active |= IFM_HDX; 5778 else 5779 ifmr->ifm_active |= IFM_FDX; 5780 BGE_UNLOCK(sc); 5781 return; 5782 } 5783 5784 mii = device_get_softc(sc->bge_miibus); 5785 mii_pollstat(mii); 5786 ifmr->ifm_active = mii->mii_media_active; 5787 ifmr->ifm_status = mii->mii_media_status; 5788 5789 BGE_UNLOCK(sc); 5790 } 5791 5792 static int 5793 bge_ioctl(if_t ifp, u_long command, caddr_t data) 5794 { 5795 struct bge_softc *sc = if_getsoftc(ifp); 5796 struct ifreq *ifr = (struct ifreq *) data; 5797 struct mii_data *mii; 5798 int flags, mask, error = 0; 5799 5800 switch (command) { 5801 case SIOCSIFMTU: 5802 if (BGE_IS_JUMBO_CAPABLE(sc) || 5803 (sc->bge_flags & BGE_FLAG_JUMBO_STD)) { 5804 if (ifr->ifr_mtu < ETHERMIN || 5805 ifr->ifr_mtu > BGE_JUMBO_MTU) { 5806 error = EINVAL; 5807 break; 5808 } 5809 } else if (ifr->ifr_mtu < ETHERMIN || ifr->ifr_mtu > ETHERMTU) { 5810 error = EINVAL; 5811 break; 5812 } 5813 BGE_LOCK(sc); 5814 if (if_getmtu(ifp) != ifr->ifr_mtu) { 5815 if_setmtu(ifp, ifr->ifr_mtu); 5816 if (if_getdrvflags(ifp) & IFF_DRV_RUNNING) { 5817 if_setdrvflagbits(ifp, 0, IFF_DRV_RUNNING); 5818 bge_init_locked(sc); 5819 } 5820 } 5821 BGE_UNLOCK(sc); 5822 break; 5823 case SIOCSIFFLAGS: 5824 BGE_LOCK(sc); 5825 if (if_getflags(ifp) & IFF_UP) { 5826 /* 5827 * If only the state of the PROMISC flag changed, 5828 * then just use the 'set promisc mode' command 5829 * instead of reinitializing the entire NIC. Doing 5830 * a full re-init means reloading the firmware and 5831 * waiting for it to start up, which may take a 5832 * second or two. Similarly for ALLMULTI. 5833 */ 5834 if (if_getdrvflags(ifp) & IFF_DRV_RUNNING) { 5835 flags = if_getflags(ifp) ^ sc->bge_if_flags; 5836 if (flags & IFF_PROMISC) 5837 bge_setpromisc(sc); 5838 if (flags & IFF_ALLMULTI) 5839 bge_setmulti(sc); 5840 } else 5841 bge_init_locked(sc); 5842 } else { 5843 if (if_getdrvflags(ifp) & IFF_DRV_RUNNING) { 5844 bge_stop(sc); 5845 } 5846 } 5847 sc->bge_if_flags = if_getflags(ifp); 5848 BGE_UNLOCK(sc); 5849 error = 0; 5850 break; 5851 case SIOCADDMULTI: 5852 case SIOCDELMULTI: 5853 if (if_getdrvflags(ifp) & IFF_DRV_RUNNING) { 5854 BGE_LOCK(sc); 5855 bge_setmulti(sc); 5856 BGE_UNLOCK(sc); 5857 error = 0; 5858 } 5859 break; 5860 case SIOCSIFMEDIA: 5861 case SIOCGIFMEDIA: 5862 if (sc->bge_flags & BGE_FLAG_TBI) { 5863 error = ifmedia_ioctl(ifp, ifr, 5864 &sc->bge_ifmedia, command); 5865 } else { 5866 mii = device_get_softc(sc->bge_miibus); 5867 error = ifmedia_ioctl(ifp, ifr, 5868 &mii->mii_media, command); 5869 } 5870 break; 5871 case SIOCSIFCAP: 5872 mask = ifr->ifr_reqcap ^ if_getcapenable(ifp); 5873 #ifdef DEVICE_POLLING 5874 if (mask & IFCAP_POLLING) { 5875 if (ifr->ifr_reqcap & IFCAP_POLLING) { 5876 error = ether_poll_register(bge_poll, ifp); 5877 if (error) 5878 return (error); 5879 BGE_LOCK(sc); 5880 BGE_SETBIT(sc, BGE_PCI_MISC_CTL, 5881 BGE_PCIMISCCTL_MASK_PCI_INTR); 5882 bge_writembx(sc, BGE_MBX_IRQ0_LO, 1); 5883 if_setcapenablebit(ifp, IFCAP_POLLING, 0); 5884 BGE_UNLOCK(sc); 5885 } else { 5886 error = ether_poll_deregister(ifp); 5887 /* Enable interrupt even in error case */ 5888 BGE_LOCK(sc); 5889 BGE_CLRBIT(sc, BGE_PCI_MISC_CTL, 5890 BGE_PCIMISCCTL_MASK_PCI_INTR); 5891 bge_writembx(sc, BGE_MBX_IRQ0_LO, 0); 5892 if_setcapenablebit(ifp, 0, IFCAP_POLLING); 5893 BGE_UNLOCK(sc); 5894 } 5895 } 5896 #endif 5897 if ((mask & IFCAP_TXCSUM) != 0 && 5898 (if_getcapabilities(ifp) & IFCAP_TXCSUM) != 0) { 5899 if_togglecapenable(ifp, IFCAP_TXCSUM); 5900 if ((if_getcapenable(ifp) & IFCAP_TXCSUM) != 0) 5901 if_sethwassistbits(ifp, 5902 sc->bge_csum_features, 0); 5903 else 5904 if_sethwassistbits(ifp, 0, 5905 sc->bge_csum_features); 5906 } 5907 5908 if ((mask & IFCAP_RXCSUM) != 0 && 5909 (if_getcapabilities(ifp) & IFCAP_RXCSUM) != 0) 5910 if_togglecapenable(ifp, IFCAP_RXCSUM); 5911 5912 if ((mask & IFCAP_TSO4) != 0 && 5913 (if_getcapabilities(ifp) & IFCAP_TSO4) != 0) { 5914 if_togglecapenable(ifp, IFCAP_TSO4); 5915 if ((if_getcapenable(ifp) & IFCAP_TSO4) != 0) 5916 if_sethwassistbits(ifp, CSUM_TSO, 0); 5917 else 5918 if_sethwassistbits(ifp, 0, CSUM_TSO); 5919 } 5920 5921 if (mask & IFCAP_VLAN_MTU) { 5922 if_togglecapenable(ifp, IFCAP_VLAN_MTU); 5923 if_setdrvflagbits(ifp, 0, IFF_DRV_RUNNING); 5924 bge_init(sc); 5925 } 5926 5927 if ((mask & IFCAP_VLAN_HWTSO) != 0 && 5928 (if_getcapabilities(ifp) & IFCAP_VLAN_HWTSO) != 0) 5929 if_togglecapenable(ifp, IFCAP_VLAN_HWTSO); 5930 if ((mask & IFCAP_VLAN_HWTAGGING) != 0 && 5931 (if_getcapabilities(ifp) & IFCAP_VLAN_HWTAGGING) != 0) { 5932 if_togglecapenable(ifp, IFCAP_VLAN_HWTAGGING); 5933 if ((if_getcapenable(ifp) & IFCAP_VLAN_HWTAGGING) == 0) 5934 if_setcapenablebit(ifp, 0, IFCAP_VLAN_HWTSO); 5935 BGE_LOCK(sc); 5936 bge_setvlan(sc); 5937 BGE_UNLOCK(sc); 5938 } 5939 #ifdef VLAN_CAPABILITIES 5940 if_vlancap(ifp); 5941 #endif 5942 break; 5943 default: 5944 error = ether_ioctl(ifp, command, data); 5945 break; 5946 } 5947 5948 return (error); 5949 } 5950 5951 static void 5952 bge_watchdog(struct bge_softc *sc) 5953 { 5954 if_t ifp; 5955 uint32_t status; 5956 5957 BGE_LOCK_ASSERT(sc); 5958 5959 if (sc->bge_timer == 0 || --sc->bge_timer) 5960 return; 5961 5962 /* If pause frames are active then don't reset the hardware. */ 5963 if ((CSR_READ_4(sc, BGE_RX_MODE) & BGE_RXMODE_FLOWCTL_ENABLE) != 0) { 5964 status = CSR_READ_4(sc, BGE_RX_STS); 5965 if ((status & BGE_RXSTAT_REMOTE_XOFFED) != 0) { 5966 /* 5967 * If link partner has us in XOFF state then wait for 5968 * the condition to clear. 5969 */ 5970 CSR_WRITE_4(sc, BGE_RX_STS, status); 5971 sc->bge_timer = BGE_TX_TIMEOUT; 5972 return; 5973 } else if ((status & BGE_RXSTAT_RCVD_XOFF) != 0 && 5974 (status & BGE_RXSTAT_RCVD_XON) != 0) { 5975 /* 5976 * If link partner has us in XOFF state then wait for 5977 * the condition to clear. 5978 */ 5979 CSR_WRITE_4(sc, BGE_RX_STS, status); 5980 sc->bge_timer = BGE_TX_TIMEOUT; 5981 return; 5982 } 5983 /* 5984 * Any other condition is unexpected and the controller 5985 * should be reset. 5986 */ 5987 } 5988 5989 ifp = sc->bge_ifp; 5990 5991 if_printf(ifp, "watchdog timeout -- resetting\n"); 5992 5993 if_setdrvflagbits(ifp, 0, IFF_DRV_RUNNING); 5994 bge_init_locked(sc); 5995 5996 if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); 5997 } 5998 5999 static void 6000 bge_stop_block(struct bge_softc *sc, bus_size_t reg, uint32_t bit) 6001 { 6002 int i; 6003 6004 BGE_CLRBIT(sc, reg, bit); 6005 6006 for (i = 0; i < BGE_TIMEOUT; i++) { 6007 if ((CSR_READ_4(sc, reg) & bit) == 0) 6008 return; 6009 DELAY(100); 6010 } 6011 } 6012 6013 /* 6014 * Stop the adapter and free any mbufs allocated to the 6015 * RX and TX lists. 6016 */ 6017 static void 6018 bge_stop(struct bge_softc *sc) 6019 { 6020 if_t ifp; 6021 6022 BGE_LOCK_ASSERT(sc); 6023 6024 ifp = sc->bge_ifp; 6025 6026 callout_stop(&sc->bge_stat_ch); 6027 6028 /* Disable host interrupts. */ 6029 BGE_SETBIT(sc, BGE_PCI_MISC_CTL, BGE_PCIMISCCTL_MASK_PCI_INTR); 6030 bge_writembx(sc, BGE_MBX_IRQ0_LO, 1); 6031 6032 /* 6033 * Tell firmware we're shutting down. 6034 */ 6035 bge_stop_fw(sc); 6036 bge_sig_pre_reset(sc, BGE_RESET_SHUTDOWN); 6037 6038 /* 6039 * Disable all of the receiver blocks. 6040 */ 6041 bge_stop_block(sc, BGE_RX_MODE, BGE_RXMODE_ENABLE); 6042 bge_stop_block(sc, BGE_RBDI_MODE, BGE_RBDIMODE_ENABLE); 6043 bge_stop_block(sc, BGE_RXLP_MODE, BGE_RXLPMODE_ENABLE); 6044 if (BGE_IS_5700_FAMILY(sc)) 6045 bge_stop_block(sc, BGE_RXLS_MODE, BGE_RXLSMODE_ENABLE); 6046 bge_stop_block(sc, BGE_RDBDI_MODE, BGE_RBDIMODE_ENABLE); 6047 bge_stop_block(sc, BGE_RDC_MODE, BGE_RDCMODE_ENABLE); 6048 bge_stop_block(sc, BGE_RBDC_MODE, BGE_RBDCMODE_ENABLE); 6049 6050 /* 6051 * Disable all of the transmit blocks. 6052 */ 6053 bge_stop_block(sc, BGE_SRS_MODE, BGE_SRSMODE_ENABLE); 6054 bge_stop_block(sc, BGE_SBDI_MODE, BGE_SBDIMODE_ENABLE); 6055 bge_stop_block(sc, BGE_SDI_MODE, BGE_SDIMODE_ENABLE); 6056 bge_stop_block(sc, BGE_RDMA_MODE, BGE_RDMAMODE_ENABLE); 6057 bge_stop_block(sc, BGE_SDC_MODE, BGE_SDCMODE_ENABLE); 6058 if (BGE_IS_5700_FAMILY(sc)) 6059 bge_stop_block(sc, BGE_DMAC_MODE, BGE_DMACMODE_ENABLE); 6060 bge_stop_block(sc, BGE_SBDC_MODE, BGE_SBDCMODE_ENABLE); 6061 6062 /* 6063 * Shut down all of the memory managers and related 6064 * state machines. 6065 */ 6066 bge_stop_block(sc, BGE_HCC_MODE, BGE_HCCMODE_ENABLE); 6067 bge_stop_block(sc, BGE_WDMA_MODE, BGE_WDMAMODE_ENABLE); 6068 if (BGE_IS_5700_FAMILY(sc)) 6069 bge_stop_block(sc, BGE_MBCF_MODE, BGE_MBCFMODE_ENABLE); 6070 6071 CSR_WRITE_4(sc, BGE_FTQ_RESET, 0xFFFFFFFF); 6072 CSR_WRITE_4(sc, BGE_FTQ_RESET, 0); 6073 if (!(BGE_IS_5705_PLUS(sc))) { 6074 BGE_CLRBIT(sc, BGE_BMAN_MODE, BGE_BMANMODE_ENABLE); 6075 BGE_CLRBIT(sc, BGE_MARB_MODE, BGE_MARBMODE_ENABLE); 6076 } 6077 /* Update MAC statistics. */ 6078 if (BGE_IS_5705_PLUS(sc)) 6079 bge_stats_update_regs(sc); 6080 6081 bge_reset(sc); 6082 bge_sig_legacy(sc, BGE_RESET_SHUTDOWN); 6083 bge_sig_post_reset(sc, BGE_RESET_SHUTDOWN); 6084 6085 /* 6086 * Keep the ASF firmware running if up. 6087 */ 6088 if (sc->bge_asf_mode & ASF_STACKUP) 6089 BGE_SETBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP); 6090 else 6091 BGE_CLRBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP); 6092 6093 /* Free the RX lists. */ 6094 bge_free_rx_ring_std(sc); 6095 6096 /* Free jumbo RX list. */ 6097 if (BGE_IS_JUMBO_CAPABLE(sc)) 6098 bge_free_rx_ring_jumbo(sc); 6099 6100 /* Free TX buffers. */ 6101 bge_free_tx_ring(sc); 6102 6103 sc->bge_tx_saved_considx = BGE_TXCONS_UNSET; 6104 6105 /* Clear MAC's link state (PHY may still have link UP). */ 6106 if (bootverbose && sc->bge_link) 6107 if_printf(sc->bge_ifp, "link DOWN\n"); 6108 sc->bge_link = 0; 6109 6110 if_setdrvflagbits(ifp, 0, (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)); 6111 } 6112 6113 /* 6114 * Stop all chip I/O so that the kernel's probe routines don't 6115 * get confused by errant DMAs when rebooting. 6116 */ 6117 static int 6118 bge_shutdown(device_t dev) 6119 { 6120 struct bge_softc *sc; 6121 6122 sc = device_get_softc(dev); 6123 BGE_LOCK(sc); 6124 bge_stop(sc); 6125 BGE_UNLOCK(sc); 6126 6127 return (0); 6128 } 6129 6130 static int 6131 bge_suspend(device_t dev) 6132 { 6133 struct bge_softc *sc; 6134 6135 sc = device_get_softc(dev); 6136 BGE_LOCK(sc); 6137 bge_stop(sc); 6138 BGE_UNLOCK(sc); 6139 6140 return (0); 6141 } 6142 6143 static int 6144 bge_resume(device_t dev) 6145 { 6146 struct bge_softc *sc; 6147 if_t ifp; 6148 6149 sc = device_get_softc(dev); 6150 BGE_LOCK(sc); 6151 ifp = sc->bge_ifp; 6152 if (if_getflags(ifp) & IFF_UP) { 6153 bge_init_locked(sc); 6154 if (if_getdrvflags(ifp) & IFF_DRV_RUNNING) 6155 bge_start_locked(ifp); 6156 } 6157 BGE_UNLOCK(sc); 6158 6159 return (0); 6160 } 6161 6162 static void 6163 bge_link_upd(struct bge_softc *sc) 6164 { 6165 struct mii_data *mii; 6166 uint32_t link, status; 6167 6168 BGE_LOCK_ASSERT(sc); 6169 6170 /* Clear 'pending link event' flag. */ 6171 sc->bge_link_evt = 0; 6172 6173 /* 6174 * Process link state changes. 6175 * Grrr. The link status word in the status block does 6176 * not work correctly on the BCM5700 rev AX and BX chips, 6177 * according to all available information. Hence, we have 6178 * to enable MII interrupts in order to properly obtain 6179 * async link changes. Unfortunately, this also means that 6180 * we have to read the MAC status register to detect link 6181 * changes, thereby adding an additional register access to 6182 * the interrupt handler. 6183 * 6184 * XXX: perhaps link state detection procedure used for 6185 * BGE_CHIPID_BCM5700_B2 can be used for others BCM5700 revisions. 6186 */ 6187 6188 if (sc->bge_asicrev == BGE_ASICREV_BCM5700 && 6189 sc->bge_chipid != BGE_CHIPID_BCM5700_B2) { 6190 status = CSR_READ_4(sc, BGE_MAC_STS); 6191 if (status & BGE_MACSTAT_MI_INTERRUPT) { 6192 mii = device_get_softc(sc->bge_miibus); 6193 mii_pollstat(mii); 6194 if (!sc->bge_link && 6195 mii->mii_media_status & IFM_ACTIVE && 6196 IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) { 6197 sc->bge_link++; 6198 if (bootverbose) 6199 if_printf(sc->bge_ifp, "link UP\n"); 6200 } else if (sc->bge_link && 6201 (!(mii->mii_media_status & IFM_ACTIVE) || 6202 IFM_SUBTYPE(mii->mii_media_active) == IFM_NONE)) { 6203 sc->bge_link = 0; 6204 if (bootverbose) 6205 if_printf(sc->bge_ifp, "link DOWN\n"); 6206 } 6207 6208 /* Clear the interrupt. */ 6209 CSR_WRITE_4(sc, BGE_MAC_EVT_ENB, 6210 BGE_EVTENB_MI_INTERRUPT); 6211 bge_miibus_readreg(sc->bge_dev, sc->bge_phy_addr, 6212 BRGPHY_MII_ISR); 6213 bge_miibus_writereg(sc->bge_dev, sc->bge_phy_addr, 6214 BRGPHY_MII_IMR, BRGPHY_INTRS); 6215 } 6216 return; 6217 } 6218 6219 if (sc->bge_flags & BGE_FLAG_TBI) { 6220 status = CSR_READ_4(sc, BGE_MAC_STS); 6221 if (status & BGE_MACSTAT_TBI_PCS_SYNCHED) { 6222 if (!sc->bge_link) { 6223 sc->bge_link++; 6224 if (sc->bge_asicrev == BGE_ASICREV_BCM5704) { 6225 BGE_CLRBIT(sc, BGE_MAC_MODE, 6226 BGE_MACMODE_TBI_SEND_CFGS); 6227 DELAY(40); 6228 } 6229 CSR_WRITE_4(sc, BGE_MAC_STS, 0xFFFFFFFF); 6230 if (bootverbose) 6231 if_printf(sc->bge_ifp, "link UP\n"); 6232 if_link_state_change(sc->bge_ifp, 6233 LINK_STATE_UP); 6234 } 6235 } else if (sc->bge_link) { 6236 sc->bge_link = 0; 6237 if (bootverbose) 6238 if_printf(sc->bge_ifp, "link DOWN\n"); 6239 if_link_state_change(sc->bge_ifp, LINK_STATE_DOWN); 6240 } 6241 } else if ((sc->bge_mi_mode & BGE_MIMODE_AUTOPOLL) != 0) { 6242 /* 6243 * Some broken BCM chips have BGE_STATFLAG_LINKSTATE_CHANGED bit 6244 * in status word always set. Workaround this bug by reading 6245 * PHY link status directly. 6246 */ 6247 link = (CSR_READ_4(sc, BGE_MI_STS) & BGE_MISTS_LINK) ? 1 : 0; 6248 6249 if (link != sc->bge_link || 6250 sc->bge_asicrev == BGE_ASICREV_BCM5700) { 6251 mii = device_get_softc(sc->bge_miibus); 6252 mii_pollstat(mii); 6253 if (!sc->bge_link && 6254 mii->mii_media_status & IFM_ACTIVE && 6255 IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) { 6256 sc->bge_link++; 6257 if (bootverbose) 6258 if_printf(sc->bge_ifp, "link UP\n"); 6259 } else if (sc->bge_link && 6260 (!(mii->mii_media_status & IFM_ACTIVE) || 6261 IFM_SUBTYPE(mii->mii_media_active) == IFM_NONE)) { 6262 sc->bge_link = 0; 6263 if (bootverbose) 6264 if_printf(sc->bge_ifp, "link DOWN\n"); 6265 } 6266 } 6267 } else { 6268 /* 6269 * For controllers that call mii_tick, we have to poll 6270 * link status. 6271 */ 6272 mii = device_get_softc(sc->bge_miibus); 6273 mii_pollstat(mii); 6274 bge_miibus_statchg(sc->bge_dev); 6275 } 6276 6277 /* Disable MAC attention when link is up. */ 6278 CSR_WRITE_4(sc, BGE_MAC_STS, BGE_MACSTAT_SYNC_CHANGED | 6279 BGE_MACSTAT_CFG_CHANGED | BGE_MACSTAT_MI_COMPLETE | 6280 BGE_MACSTAT_LINK_CHANGED); 6281 } 6282 6283 static void 6284 bge_add_sysctls(struct bge_softc *sc) 6285 { 6286 struct sysctl_ctx_list *ctx; 6287 struct sysctl_oid_list *children; 6288 int unit; 6289 6290 ctx = device_get_sysctl_ctx(sc->bge_dev); 6291 children = SYSCTL_CHILDREN(device_get_sysctl_tree(sc->bge_dev)); 6292 6293 #ifdef BGE_REGISTER_DEBUG 6294 SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "debug_info", 6295 CTLTYPE_INT | CTLFLAG_RW, sc, 0, bge_sysctl_debug_info, "I", 6296 "Debug Information"); 6297 6298 SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "reg_read", 6299 CTLTYPE_INT | CTLFLAG_RW, sc, 0, bge_sysctl_reg_read, "I", 6300 "MAC Register Read"); 6301 6302 SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "ape_read", 6303 CTLTYPE_INT | CTLFLAG_RW, sc, 0, bge_sysctl_ape_read, "I", 6304 "APE Register Read"); 6305 6306 SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "mem_read", 6307 CTLTYPE_INT | CTLFLAG_RW, sc, 0, bge_sysctl_mem_read, "I", 6308 "Memory Read"); 6309 6310 #endif 6311 6312 unit = device_get_unit(sc->bge_dev); 6313 /* 6314 * A common design characteristic for many Broadcom client controllers 6315 * is that they only support a single outstanding DMA read operation 6316 * on the PCIe bus. This means that it will take twice as long to fetch 6317 * a TX frame that is split into header and payload buffers as it does 6318 * to fetch a single, contiguous TX frame (2 reads vs. 1 read). For 6319 * these controllers, coalescing buffers to reduce the number of memory 6320 * reads is effective way to get maximum performance(about 940Mbps). 6321 * Without collapsing TX buffers the maximum TCP bulk transfer 6322 * performance is about 850Mbps. However forcing coalescing mbufs 6323 * consumes a lot of CPU cycles, so leave it off by default. 6324 */ 6325 sc->bge_forced_collapse = 0; 6326 SYSCTL_ADD_INT(ctx, children, OID_AUTO, "forced_collapse", 6327 CTLFLAG_RWTUN, &sc->bge_forced_collapse, 0, 6328 "Number of fragmented TX buffers of a frame allowed before " 6329 "forced collapsing"); 6330 6331 sc->bge_msi = 1; 6332 SYSCTL_ADD_INT(ctx, children, OID_AUTO, "msi", 6333 CTLFLAG_RDTUN, &sc->bge_msi, 0, "Enable MSI"); 6334 6335 /* 6336 * It seems all Broadcom controllers have a bug that can generate UDP 6337 * datagrams with checksum value 0 when TX UDP checksum offloading is 6338 * enabled. Generating UDP checksum value 0 is RFC 768 violation. 6339 * Even though the probability of generating such UDP datagrams is 6340 * low, I don't want to see FreeBSD boxes to inject such datagrams 6341 * into network so disable UDP checksum offloading by default. Users 6342 * still override this behavior by setting a sysctl variable, 6343 * dev.bge.0.forced_udpcsum. 6344 */ 6345 sc->bge_forced_udpcsum = 0; 6346 SYSCTL_ADD_INT(ctx, children, OID_AUTO, "forced_udpcsum", 6347 CTLFLAG_RWTUN, &sc->bge_forced_udpcsum, 0, 6348 "Enable UDP checksum offloading even if controller can " 6349 "generate UDP checksum value 0"); 6350 6351 if (BGE_IS_5705_PLUS(sc)) 6352 bge_add_sysctl_stats_regs(sc, ctx, children); 6353 else 6354 bge_add_sysctl_stats(sc, ctx, children); 6355 } 6356 6357 #define BGE_SYSCTL_STAT(sc, ctx, desc, parent, node, oid) \ 6358 SYSCTL_ADD_PROC(ctx, parent, OID_AUTO, oid, CTLTYPE_UINT|CTLFLAG_RD, \ 6359 sc, offsetof(struct bge_stats, node), bge_sysctl_stats, "IU", \ 6360 desc) 6361 6362 static void 6363 bge_add_sysctl_stats(struct bge_softc *sc, struct sysctl_ctx_list *ctx, 6364 struct sysctl_oid_list *parent) 6365 { 6366 struct sysctl_oid *tree; 6367 struct sysctl_oid_list *children, *schildren; 6368 6369 tree = SYSCTL_ADD_NODE(ctx, parent, OID_AUTO, "stats", CTLFLAG_RD, 6370 NULL, "BGE Statistics"); 6371 schildren = children = SYSCTL_CHILDREN(tree); 6372 BGE_SYSCTL_STAT(sc, ctx, "Frames Dropped Due To Filters", 6373 children, COSFramesDroppedDueToFilters, 6374 "FramesDroppedDueToFilters"); 6375 BGE_SYSCTL_STAT(sc, ctx, "NIC DMA Write Queue Full", 6376 children, nicDmaWriteQueueFull, "DmaWriteQueueFull"); 6377 BGE_SYSCTL_STAT(sc, ctx, "NIC DMA Write High Priority Queue Full", 6378 children, nicDmaWriteHighPriQueueFull, "DmaWriteHighPriQueueFull"); 6379 BGE_SYSCTL_STAT(sc, ctx, "NIC No More RX Buffer Descriptors", 6380 children, nicNoMoreRxBDs, "NoMoreRxBDs"); 6381 BGE_SYSCTL_STAT(sc, ctx, "Discarded Input Frames", 6382 children, ifInDiscards, "InputDiscards"); 6383 BGE_SYSCTL_STAT(sc, ctx, "Input Errors", 6384 children, ifInErrors, "InputErrors"); 6385 BGE_SYSCTL_STAT(sc, ctx, "NIC Recv Threshold Hit", 6386 children, nicRecvThresholdHit, "RecvThresholdHit"); 6387 BGE_SYSCTL_STAT(sc, ctx, "NIC DMA Read Queue Full", 6388 children, nicDmaReadQueueFull, "DmaReadQueueFull"); 6389 BGE_SYSCTL_STAT(sc, ctx, "NIC DMA Read High Priority Queue Full", 6390 children, nicDmaReadHighPriQueueFull, "DmaReadHighPriQueueFull"); 6391 BGE_SYSCTL_STAT(sc, ctx, "NIC Send Data Complete Queue Full", 6392 children, nicSendDataCompQueueFull, "SendDataCompQueueFull"); 6393 BGE_SYSCTL_STAT(sc, ctx, "NIC Ring Set Send Producer Index", 6394 children, nicRingSetSendProdIndex, "RingSetSendProdIndex"); 6395 BGE_SYSCTL_STAT(sc, ctx, "NIC Ring Status Update", 6396 children, nicRingStatusUpdate, "RingStatusUpdate"); 6397 BGE_SYSCTL_STAT(sc, ctx, "NIC Interrupts", 6398 children, nicInterrupts, "Interrupts"); 6399 BGE_SYSCTL_STAT(sc, ctx, "NIC Avoided Interrupts", 6400 children, nicAvoidedInterrupts, "AvoidedInterrupts"); 6401 BGE_SYSCTL_STAT(sc, ctx, "NIC Send Threshold Hit", 6402 children, nicSendThresholdHit, "SendThresholdHit"); 6403 6404 tree = SYSCTL_ADD_NODE(ctx, schildren, OID_AUTO, "rx", CTLFLAG_RD, 6405 NULL, "BGE RX Statistics"); 6406 children = SYSCTL_CHILDREN(tree); 6407 BGE_SYSCTL_STAT(sc, ctx, "Inbound Octets", 6408 children, rxstats.ifHCInOctets, "ifHCInOctets"); 6409 BGE_SYSCTL_STAT(sc, ctx, "Fragments", 6410 children, rxstats.etherStatsFragments, "Fragments"); 6411 BGE_SYSCTL_STAT(sc, ctx, "Inbound Unicast Packets", 6412 children, rxstats.ifHCInUcastPkts, "UnicastPkts"); 6413 BGE_SYSCTL_STAT(sc, ctx, "Inbound Multicast Packets", 6414 children, rxstats.ifHCInMulticastPkts, "MulticastPkts"); 6415 BGE_SYSCTL_STAT(sc, ctx, "FCS Errors", 6416 children, rxstats.dot3StatsFCSErrors, "FCSErrors"); 6417 BGE_SYSCTL_STAT(sc, ctx, "Alignment Errors", 6418 children, rxstats.dot3StatsAlignmentErrors, "AlignmentErrors"); 6419 BGE_SYSCTL_STAT(sc, ctx, "XON Pause Frames Received", 6420 children, rxstats.xonPauseFramesReceived, "xonPauseFramesReceived"); 6421 BGE_SYSCTL_STAT(sc, ctx, "XOFF Pause Frames Received", 6422 children, rxstats.xoffPauseFramesReceived, 6423 "xoffPauseFramesReceived"); 6424 BGE_SYSCTL_STAT(sc, ctx, "MAC Control Frames Received", 6425 children, rxstats.macControlFramesReceived, 6426 "ControlFramesReceived"); 6427 BGE_SYSCTL_STAT(sc, ctx, "XOFF State Entered", 6428 children, rxstats.xoffStateEntered, "xoffStateEntered"); 6429 BGE_SYSCTL_STAT(sc, ctx, "Frames Too Long", 6430 children, rxstats.dot3StatsFramesTooLong, "FramesTooLong"); 6431 BGE_SYSCTL_STAT(sc, ctx, "Jabbers", 6432 children, rxstats.etherStatsJabbers, "Jabbers"); 6433 BGE_SYSCTL_STAT(sc, ctx, "Undersized Packets", 6434 children, rxstats.etherStatsUndersizePkts, "UndersizePkts"); 6435 BGE_SYSCTL_STAT(sc, ctx, "Inbound Range Length Errors", 6436 children, rxstats.inRangeLengthError, "inRangeLengthError"); 6437 BGE_SYSCTL_STAT(sc, ctx, "Outbound Range Length Errors", 6438 children, rxstats.outRangeLengthError, "outRangeLengthError"); 6439 6440 tree = SYSCTL_ADD_NODE(ctx, schildren, OID_AUTO, "tx", CTLFLAG_RD, 6441 NULL, "BGE TX Statistics"); 6442 children = SYSCTL_CHILDREN(tree); 6443 BGE_SYSCTL_STAT(sc, ctx, "Outbound Octets", 6444 children, txstats.ifHCOutOctets, "ifHCOutOctets"); 6445 BGE_SYSCTL_STAT(sc, ctx, "TX Collisions", 6446 children, txstats.etherStatsCollisions, "Collisions"); 6447 BGE_SYSCTL_STAT(sc, ctx, "XON Sent", 6448 children, txstats.outXonSent, "XonSent"); 6449 BGE_SYSCTL_STAT(sc, ctx, "XOFF Sent", 6450 children, txstats.outXoffSent, "XoffSent"); 6451 BGE_SYSCTL_STAT(sc, ctx, "Flow Control Done", 6452 children, txstats.flowControlDone, "flowControlDone"); 6453 BGE_SYSCTL_STAT(sc, ctx, "Internal MAC TX errors", 6454 children, txstats.dot3StatsInternalMacTransmitErrors, 6455 "InternalMacTransmitErrors"); 6456 BGE_SYSCTL_STAT(sc, ctx, "Single Collision Frames", 6457 children, txstats.dot3StatsSingleCollisionFrames, 6458 "SingleCollisionFrames"); 6459 BGE_SYSCTL_STAT(sc, ctx, "Multiple Collision Frames", 6460 children, txstats.dot3StatsMultipleCollisionFrames, 6461 "MultipleCollisionFrames"); 6462 BGE_SYSCTL_STAT(sc, ctx, "Deferred Transmissions", 6463 children, txstats.dot3StatsDeferredTransmissions, 6464 "DeferredTransmissions"); 6465 BGE_SYSCTL_STAT(sc, ctx, "Excessive Collisions", 6466 children, txstats.dot3StatsExcessiveCollisions, 6467 "ExcessiveCollisions"); 6468 BGE_SYSCTL_STAT(sc, ctx, "Late Collisions", 6469 children, txstats.dot3StatsLateCollisions, 6470 "LateCollisions"); 6471 BGE_SYSCTL_STAT(sc, ctx, "Outbound Unicast Packets", 6472 children, txstats.ifHCOutUcastPkts, "UnicastPkts"); 6473 BGE_SYSCTL_STAT(sc, ctx, "Outbound Multicast Packets", 6474 children, txstats.ifHCOutMulticastPkts, "MulticastPkts"); 6475 BGE_SYSCTL_STAT(sc, ctx, "Outbound Broadcast Packets", 6476 children, txstats.ifHCOutBroadcastPkts, "BroadcastPkts"); 6477 BGE_SYSCTL_STAT(sc, ctx, "Carrier Sense Errors", 6478 children, txstats.dot3StatsCarrierSenseErrors, 6479 "CarrierSenseErrors"); 6480 BGE_SYSCTL_STAT(sc, ctx, "Outbound Discards", 6481 children, txstats.ifOutDiscards, "Discards"); 6482 BGE_SYSCTL_STAT(sc, ctx, "Outbound Errors", 6483 children, txstats.ifOutErrors, "Errors"); 6484 } 6485 6486 #undef BGE_SYSCTL_STAT 6487 6488 #define BGE_SYSCTL_STAT_ADD64(c, h, n, p, d) \ 6489 SYSCTL_ADD_UQUAD(c, h, OID_AUTO, n, CTLFLAG_RD, p, d) 6490 6491 static void 6492 bge_add_sysctl_stats_regs(struct bge_softc *sc, struct sysctl_ctx_list *ctx, 6493 struct sysctl_oid_list *parent) 6494 { 6495 struct sysctl_oid *tree; 6496 struct sysctl_oid_list *child, *schild; 6497 struct bge_mac_stats *stats; 6498 6499 stats = &sc->bge_mac_stats; 6500 tree = SYSCTL_ADD_NODE(ctx, parent, OID_AUTO, "stats", CTLFLAG_RD, 6501 NULL, "BGE Statistics"); 6502 schild = child = SYSCTL_CHILDREN(tree); 6503 BGE_SYSCTL_STAT_ADD64(ctx, child, "FramesDroppedDueToFilters", 6504 &stats->FramesDroppedDueToFilters, "Frames Dropped Due to Filters"); 6505 BGE_SYSCTL_STAT_ADD64(ctx, child, "DmaWriteQueueFull", 6506 &stats->DmaWriteQueueFull, "NIC DMA Write Queue Full"); 6507 BGE_SYSCTL_STAT_ADD64(ctx, child, "DmaWriteHighPriQueueFull", 6508 &stats->DmaWriteHighPriQueueFull, 6509 "NIC DMA Write High Priority Queue Full"); 6510 BGE_SYSCTL_STAT_ADD64(ctx, child, "NoMoreRxBDs", 6511 &stats->NoMoreRxBDs, "NIC No More RX Buffer Descriptors"); 6512 BGE_SYSCTL_STAT_ADD64(ctx, child, "InputDiscards", 6513 &stats->InputDiscards, "Discarded Input Frames"); 6514 BGE_SYSCTL_STAT_ADD64(ctx, child, "InputErrors", 6515 &stats->InputErrors, "Input Errors"); 6516 BGE_SYSCTL_STAT_ADD64(ctx, child, "RecvThresholdHit", 6517 &stats->RecvThresholdHit, "NIC Recv Threshold Hit"); 6518 6519 tree = SYSCTL_ADD_NODE(ctx, schild, OID_AUTO, "rx", CTLFLAG_RD, 6520 NULL, "BGE RX Statistics"); 6521 child = SYSCTL_CHILDREN(tree); 6522 BGE_SYSCTL_STAT_ADD64(ctx, child, "ifHCInOctets", 6523 &stats->ifHCInOctets, "Inbound Octets"); 6524 BGE_SYSCTL_STAT_ADD64(ctx, child, "Fragments", 6525 &stats->etherStatsFragments, "Fragments"); 6526 BGE_SYSCTL_STAT_ADD64(ctx, child, "UnicastPkts", 6527 &stats->ifHCInUcastPkts, "Inbound Unicast Packets"); 6528 BGE_SYSCTL_STAT_ADD64(ctx, child, "MulticastPkts", 6529 &stats->ifHCInMulticastPkts, "Inbound Multicast Packets"); 6530 BGE_SYSCTL_STAT_ADD64(ctx, child, "BroadcastPkts", 6531 &stats->ifHCInBroadcastPkts, "Inbound Broadcast Packets"); 6532 BGE_SYSCTL_STAT_ADD64(ctx, child, "FCSErrors", 6533 &stats->dot3StatsFCSErrors, "FCS Errors"); 6534 BGE_SYSCTL_STAT_ADD64(ctx, child, "AlignmentErrors", 6535 &stats->dot3StatsAlignmentErrors, "Alignment Errors"); 6536 BGE_SYSCTL_STAT_ADD64(ctx, child, "xonPauseFramesReceived", 6537 &stats->xonPauseFramesReceived, "XON Pause Frames Received"); 6538 BGE_SYSCTL_STAT_ADD64(ctx, child, "xoffPauseFramesReceived", 6539 &stats->xoffPauseFramesReceived, "XOFF Pause Frames Received"); 6540 BGE_SYSCTL_STAT_ADD64(ctx, child, "ControlFramesReceived", 6541 &stats->macControlFramesReceived, "MAC Control Frames Received"); 6542 BGE_SYSCTL_STAT_ADD64(ctx, child, "xoffStateEntered", 6543 &stats->xoffStateEntered, "XOFF State Entered"); 6544 BGE_SYSCTL_STAT_ADD64(ctx, child, "FramesTooLong", 6545 &stats->dot3StatsFramesTooLong, "Frames Too Long"); 6546 BGE_SYSCTL_STAT_ADD64(ctx, child, "Jabbers", 6547 &stats->etherStatsJabbers, "Jabbers"); 6548 BGE_SYSCTL_STAT_ADD64(ctx, child, "UndersizePkts", 6549 &stats->etherStatsUndersizePkts, "Undersized Packets"); 6550 6551 tree = SYSCTL_ADD_NODE(ctx, schild, OID_AUTO, "tx", CTLFLAG_RD, 6552 NULL, "BGE TX Statistics"); 6553 child = SYSCTL_CHILDREN(tree); 6554 BGE_SYSCTL_STAT_ADD64(ctx, child, "ifHCOutOctets", 6555 &stats->ifHCOutOctets, "Outbound Octets"); 6556 BGE_SYSCTL_STAT_ADD64(ctx, child, "Collisions", 6557 &stats->etherStatsCollisions, "TX Collisions"); 6558 BGE_SYSCTL_STAT_ADD64(ctx, child, "XonSent", 6559 &stats->outXonSent, "XON Sent"); 6560 BGE_SYSCTL_STAT_ADD64(ctx, child, "XoffSent", 6561 &stats->outXoffSent, "XOFF Sent"); 6562 BGE_SYSCTL_STAT_ADD64(ctx, child, "InternalMacTransmitErrors", 6563 &stats->dot3StatsInternalMacTransmitErrors, 6564 "Internal MAC TX Errors"); 6565 BGE_SYSCTL_STAT_ADD64(ctx, child, "SingleCollisionFrames", 6566 &stats->dot3StatsSingleCollisionFrames, "Single Collision Frames"); 6567 BGE_SYSCTL_STAT_ADD64(ctx, child, "MultipleCollisionFrames", 6568 &stats->dot3StatsMultipleCollisionFrames, 6569 "Multiple Collision Frames"); 6570 BGE_SYSCTL_STAT_ADD64(ctx, child, "DeferredTransmissions", 6571 &stats->dot3StatsDeferredTransmissions, "Deferred Transmissions"); 6572 BGE_SYSCTL_STAT_ADD64(ctx, child, "ExcessiveCollisions", 6573 &stats->dot3StatsExcessiveCollisions, "Excessive Collisions"); 6574 BGE_SYSCTL_STAT_ADD64(ctx, child, "LateCollisions", 6575 &stats->dot3StatsLateCollisions, "Late Collisions"); 6576 BGE_SYSCTL_STAT_ADD64(ctx, child, "UnicastPkts", 6577 &stats->ifHCOutUcastPkts, "Outbound Unicast Packets"); 6578 BGE_SYSCTL_STAT_ADD64(ctx, child, "MulticastPkts", 6579 &stats->ifHCOutMulticastPkts, "Outbound Multicast Packets"); 6580 BGE_SYSCTL_STAT_ADD64(ctx, child, "BroadcastPkts", 6581 &stats->ifHCOutBroadcastPkts, "Outbound Broadcast Packets"); 6582 } 6583 6584 #undef BGE_SYSCTL_STAT_ADD64 6585 6586 static int 6587 bge_sysctl_stats(SYSCTL_HANDLER_ARGS) 6588 { 6589 struct bge_softc *sc; 6590 uint32_t result; 6591 int offset; 6592 6593 sc = (struct bge_softc *)arg1; 6594 offset = arg2; 6595 result = CSR_READ_4(sc, BGE_MEMWIN_START + BGE_STATS_BLOCK + offset + 6596 offsetof(bge_hostaddr, bge_addr_lo)); 6597 return (sysctl_handle_int(oidp, &result, 0, req)); 6598 } 6599 6600 #ifdef BGE_REGISTER_DEBUG 6601 static int 6602 bge_sysctl_debug_info(SYSCTL_HANDLER_ARGS) 6603 { 6604 struct bge_softc *sc; 6605 uint16_t *sbdata; 6606 int error, result, sbsz; 6607 int i, j; 6608 6609 result = -1; 6610 error = sysctl_handle_int(oidp, &result, 0, req); 6611 if (error || (req->newptr == NULL)) 6612 return (error); 6613 6614 if (result == 1) { 6615 sc = (struct bge_softc *)arg1; 6616 6617 if (sc->bge_asicrev == BGE_ASICREV_BCM5700 && 6618 sc->bge_chipid != BGE_CHIPID_BCM5700_C0) 6619 sbsz = BGE_STATUS_BLK_SZ; 6620 else 6621 sbsz = 32; 6622 sbdata = (uint16_t *)sc->bge_ldata.bge_status_block; 6623 printf("Status Block:\n"); 6624 BGE_LOCK(sc); 6625 bus_dmamap_sync(sc->bge_cdata.bge_status_tag, 6626 sc->bge_cdata.bge_status_map, 6627 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); 6628 for (i = 0x0; i < sbsz / sizeof(uint16_t); ) { 6629 printf("%06x:", i); 6630 for (j = 0; j < 8; j++) 6631 printf(" %04x", sbdata[i++]); 6632 printf("\n"); 6633 } 6634 6635 printf("Registers:\n"); 6636 for (i = 0x800; i < 0xA00; ) { 6637 printf("%06x:", i); 6638 for (j = 0; j < 8; j++) { 6639 printf(" %08x", CSR_READ_4(sc, i)); 6640 i += 4; 6641 } 6642 printf("\n"); 6643 } 6644 BGE_UNLOCK(sc); 6645 6646 printf("Hardware Flags:\n"); 6647 if (BGE_IS_5717_PLUS(sc)) 6648 printf(" - 5717 Plus\n"); 6649 if (BGE_IS_5755_PLUS(sc)) 6650 printf(" - 5755 Plus\n"); 6651 if (BGE_IS_575X_PLUS(sc)) 6652 printf(" - 575X Plus\n"); 6653 if (BGE_IS_5705_PLUS(sc)) 6654 printf(" - 5705 Plus\n"); 6655 if (BGE_IS_5714_FAMILY(sc)) 6656 printf(" - 5714 Family\n"); 6657 if (BGE_IS_5700_FAMILY(sc)) 6658 printf(" - 5700 Family\n"); 6659 if (sc->bge_flags & BGE_FLAG_JUMBO) 6660 printf(" - Supports Jumbo Frames\n"); 6661 if (sc->bge_flags & BGE_FLAG_PCIX) 6662 printf(" - PCI-X Bus\n"); 6663 if (sc->bge_flags & BGE_FLAG_PCIE) 6664 printf(" - PCI Express Bus\n"); 6665 if (sc->bge_phy_flags & BGE_PHY_NO_3LED) 6666 printf(" - No 3 LEDs\n"); 6667 if (sc->bge_flags & BGE_FLAG_RX_ALIGNBUG) 6668 printf(" - RX Alignment Bug\n"); 6669 } 6670 6671 return (error); 6672 } 6673 6674 static int 6675 bge_sysctl_reg_read(SYSCTL_HANDLER_ARGS) 6676 { 6677 struct bge_softc *sc; 6678 int error; 6679 uint16_t result; 6680 uint32_t val; 6681 6682 result = -1; 6683 error = sysctl_handle_int(oidp, &result, 0, req); 6684 if (error || (req->newptr == NULL)) 6685 return (error); 6686 6687 if (result < 0x8000) { 6688 sc = (struct bge_softc *)arg1; 6689 val = CSR_READ_4(sc, result); 6690 printf("reg 0x%06X = 0x%08X\n", result, val); 6691 } 6692 6693 return (error); 6694 } 6695 6696 static int 6697 bge_sysctl_ape_read(SYSCTL_HANDLER_ARGS) 6698 { 6699 struct bge_softc *sc; 6700 int error; 6701 uint16_t result; 6702 uint32_t val; 6703 6704 result = -1; 6705 error = sysctl_handle_int(oidp, &result, 0, req); 6706 if (error || (req->newptr == NULL)) 6707 return (error); 6708 6709 if (result < 0x8000) { 6710 sc = (struct bge_softc *)arg1; 6711 val = APE_READ_4(sc, result); 6712 printf("reg 0x%06X = 0x%08X\n", result, val); 6713 } 6714 6715 return (error); 6716 } 6717 6718 static int 6719 bge_sysctl_mem_read(SYSCTL_HANDLER_ARGS) 6720 { 6721 struct bge_softc *sc; 6722 int error; 6723 uint16_t result; 6724 uint32_t val; 6725 6726 result = -1; 6727 error = sysctl_handle_int(oidp, &result, 0, req); 6728 if (error || (req->newptr == NULL)) 6729 return (error); 6730 6731 if (result < 0x8000) { 6732 sc = (struct bge_softc *)arg1; 6733 val = bge_readmem_ind(sc, result); 6734 printf("mem 0x%06X = 0x%08X\n", result, val); 6735 } 6736 6737 return (error); 6738 } 6739 #endif 6740 6741 static int 6742 bge_get_eaddr_fw(struct bge_softc *sc, uint8_t ether_addr[]) 6743 { 6744 #ifdef __sparc64__ 6745 if (sc->bge_flags & BGE_FLAG_EADDR) 6746 return (1); 6747 6748 OF_getetheraddr(sc->bge_dev, ether_addr); 6749 return (0); 6750 #else 6751 return (1); 6752 #endif 6753 } 6754 6755 static int 6756 bge_get_eaddr_mem(struct bge_softc *sc, uint8_t ether_addr[]) 6757 { 6758 uint32_t mac_addr; 6759 6760 mac_addr = bge_readmem_ind(sc, BGE_SRAM_MAC_ADDR_HIGH_MB); 6761 if ((mac_addr >> 16) == 0x484b) { 6762 ether_addr[0] = (uint8_t)(mac_addr >> 8); 6763 ether_addr[1] = (uint8_t)mac_addr; 6764 mac_addr = bge_readmem_ind(sc, BGE_SRAM_MAC_ADDR_LOW_MB); 6765 ether_addr[2] = (uint8_t)(mac_addr >> 24); 6766 ether_addr[3] = (uint8_t)(mac_addr >> 16); 6767 ether_addr[4] = (uint8_t)(mac_addr >> 8); 6768 ether_addr[5] = (uint8_t)mac_addr; 6769 return (0); 6770 } 6771 return (1); 6772 } 6773 6774 static int 6775 bge_get_eaddr_nvram(struct bge_softc *sc, uint8_t ether_addr[]) 6776 { 6777 int mac_offset = BGE_EE_MAC_OFFSET; 6778 6779 if (sc->bge_asicrev == BGE_ASICREV_BCM5906) 6780 mac_offset = BGE_EE_MAC_OFFSET_5906; 6781 6782 return (bge_read_nvram(sc, ether_addr, mac_offset + 2, 6783 ETHER_ADDR_LEN)); 6784 } 6785 6786 static int 6787 bge_get_eaddr_eeprom(struct bge_softc *sc, uint8_t ether_addr[]) 6788 { 6789 6790 if (sc->bge_asicrev == BGE_ASICREV_BCM5906) 6791 return (1); 6792 6793 return (bge_read_eeprom(sc, ether_addr, BGE_EE_MAC_OFFSET + 2, 6794 ETHER_ADDR_LEN)); 6795 } 6796 6797 static int 6798 bge_get_eaddr(struct bge_softc *sc, uint8_t eaddr[]) 6799 { 6800 static const bge_eaddr_fcn_t bge_eaddr_funcs[] = { 6801 /* NOTE: Order is critical */ 6802 bge_get_eaddr_fw, 6803 bge_get_eaddr_mem, 6804 bge_get_eaddr_nvram, 6805 bge_get_eaddr_eeprom, 6806 NULL 6807 }; 6808 const bge_eaddr_fcn_t *func; 6809 6810 for (func = bge_eaddr_funcs; *func != NULL; ++func) { 6811 if ((*func)(sc, eaddr) == 0) 6812 break; 6813 } 6814 return (*func == NULL ? ENXIO : 0); 6815 } 6816 6817 static uint64_t 6818 bge_get_counter(if_t ifp, ift_counter cnt) 6819 { 6820 struct bge_softc *sc; 6821 struct bge_mac_stats *stats; 6822 6823 sc = if_getsoftc(ifp); 6824 if (!BGE_IS_5705_PLUS(sc)) 6825 return (if_get_counter_default(ifp, cnt)); 6826 stats = &sc->bge_mac_stats; 6827 6828 switch (cnt) { 6829 case IFCOUNTER_IERRORS: 6830 return (stats->NoMoreRxBDs + stats->InputDiscards + 6831 stats->InputErrors); 6832 case IFCOUNTER_COLLISIONS: 6833 return (stats->etherStatsCollisions); 6834 default: 6835 return (if_get_counter_default(ifp, cnt)); 6836 } 6837 } 6838 6839 #ifdef DEBUGNET 6840 static void 6841 bge_debugnet_init(if_t ifp, int *nrxr, int *ncl, int *clsize) 6842 { 6843 struct bge_softc *sc; 6844 6845 sc = if_getsoftc(ifp); 6846 BGE_LOCK(sc); 6847 *nrxr = sc->bge_return_ring_cnt; 6848 *ncl = DEBUGNET_MAX_IN_FLIGHT; 6849 if ((sc->bge_flags & BGE_FLAG_JUMBO_STD) != 0 && 6850 (if_getmtu(sc->bge_ifp) + ETHER_HDR_LEN + ETHER_CRC_LEN + 6851 ETHER_VLAN_ENCAP_LEN > (MCLBYTES - ETHER_ALIGN))) 6852 *clsize = MJUM9BYTES; 6853 else 6854 *clsize = MCLBYTES; 6855 BGE_UNLOCK(sc); 6856 } 6857 6858 static void 6859 bge_debugnet_event(if_t ifp __unused, enum debugnet_ev event __unused) 6860 { 6861 } 6862 6863 static int 6864 bge_debugnet_transmit(if_t ifp, struct mbuf *m) 6865 { 6866 struct bge_softc *sc; 6867 uint32_t prodidx; 6868 int error; 6869 6870 sc = if_getsoftc(ifp); 6871 if ((if_getdrvflags(ifp) & (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)) != 6872 IFF_DRV_RUNNING) 6873 return (1); 6874 6875 prodidx = sc->bge_tx_prodidx; 6876 error = bge_encap(sc, &m, &prodidx); 6877 if (error == 0) 6878 bge_start_tx(sc, prodidx); 6879 return (error); 6880 } 6881 6882 static int 6883 bge_debugnet_poll(if_t ifp, int count) 6884 { 6885 struct bge_softc *sc; 6886 uint32_t rx_prod, tx_cons; 6887 6888 sc = if_getsoftc(ifp); 6889 if ((if_getdrvflags(ifp) & (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)) != 6890 IFF_DRV_RUNNING) 6891 return (1); 6892 6893 bus_dmamap_sync(sc->bge_cdata.bge_status_tag, 6894 sc->bge_cdata.bge_status_map, 6895 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); 6896 6897 rx_prod = sc->bge_ldata.bge_status_block->bge_idx[0].bge_rx_prod_idx; 6898 tx_cons = sc->bge_ldata.bge_status_block->bge_idx[0].bge_tx_cons_idx; 6899 6900 bus_dmamap_sync(sc->bge_cdata.bge_status_tag, 6901 sc->bge_cdata.bge_status_map, 6902 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 6903 6904 (void)bge_rxeof(sc, rx_prod, 0); 6905 bge_txeof(sc, tx_cons); 6906 return (0); 6907 } 6908 #endif /* DEBUGNET */ 6909