xref: /freebsd/sys/dev/atkbdc/atkbdc.c (revision 458b591fb0ccbeaf80f7116cd145fe896cbf7421)

/*-
 * Copyright (c) 1996-1999
 * Kazutaka YOKOTA (yokota@zodiac.mech.utsunomiya-u.ac.jp)
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. The name of the author may not be used to endorse or promote
 *    products derived from this software without specific prior written
 *    permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * from kbdio.c,v 1.13 1998/09/25 11:55:46 yokota Exp
 */

#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");

#include "opt_kbd.h"

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/malloc.h>
#include <sys/syslog.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/rman.h>

#if defined(__amd64__)
#include <machine/clock.h>
#endif

#include <dev/atkbdc/atkbdcreg.h>

#ifdef __sparc64__
#include <dev/ofw/openfirm.h>
#include <machine/bus_private.h>
#include <machine/ofw_machdep.h>
#else
#include <isa/isareg.h>
#endif

/* constants */

#define MAXKBDC		1		/* XXX */

/* macros */

#ifndef MAX
#define MAX(x, y)	((x) > (y) ? (x) : (y))
#endif

#define kbdcp(p)	((atkbdc_softc_t *)(p))
#define nextq(i)	(((i) + 1) % KBDQ_BUFSIZE)
#define availq(q)	((q)->head != (q)->tail)
#if KBDIO_DEBUG >= 2
#define emptyq(q)	((q)->tail = (q)->head = (q)->qcount = 0)
#else
#define emptyq(q)	((q)->tail = (q)->head = 0)
#endif

#define read_data(k)	(bus_space_read_1((k)->iot, (k)->ioh0, 0))
#define read_status(k)	(bus_space_read_1((k)->iot, (k)->ioh1, 0))
#define write_data(k, d)	\
			(bus_space_write_1((k)->iot, (k)->ioh0, 0, (d)))
#define write_command(k, d)	\
			(bus_space_write_1((k)->iot, (k)->ioh1, 0, (d)))

/* local variables */

/*
 * We always need at least one copy of the kbdc_softc struct for the
 * low-level console.  As the low-level console accesses the keyboard
 * controller before kbdc, and all other devices, is probed, we
 * statically allocate one entry. XXX
 */
static atkbdc_softc_t default_kbdc;
static atkbdc_softc_t *atkbdc_softc[MAXKBDC] = { &default_kbdc };

static int verbose = KBDIO_DEBUG;

#ifdef __sparc64__
static struct bus_space_tag atkbdc_bst_store[MAXKBDC];
#endif

/* function prototypes */

static int atkbdc_setup(atkbdc_softc_t *sc, bus_space_tag_t tag,
			bus_space_handle_t h0, bus_space_handle_t h1);
static int addq(kqueue *q, int c);
static int removeq(kqueue *q);
static int wait_while_controller_busy(atkbdc_softc_t *kbdc);
static int wait_for_data(atkbdc_softc_t *kbdc);
static int wait_for_kbd_data(atkbdc_softc_t *kbdc);
static int wait_for_kbd_ack(atkbdc_softc_t *kbdc);
static int wait_for_aux_data(atkbdc_softc_t *kbdc);
static int wait_for_aux_ack(atkbdc_softc_t *kbdc);

struct atkbdc_quirks {
    const char* bios_vendor;
    const char*	maker;
    const char*	product;
    int		quirk;
};

static struct atkbdc_quirks quirks[] = {
    {"coreboot", "Acer", "Peppy",
	KBDC_QUIRK_KEEP_ACTIVATED | KBDC_QUIRK_IGNORE_PROBE_RESULT |
	KBDC_QUIRK_RESET_AFTER_PROBE | KBDC_QUIRK_SETLEDS_ON_INIT},

    {NULL, NULL, NULL, 0}
};

#define QUIRK_STR_MATCH(s1, s2) (s1 == NULL || \
    (s2 != NULL && !strcmp(s1, s2)))

static int
atkbdc_getquirks(void)
{
    int i;
    char* bios_vendor = kern_getenv("smbios.bios.vendor");
    char* maker = kern_getenv("smbios.system.maker");
    char* product = kern_getenv("smbios.system.product");

    for (i=0; quirks[i].quirk != 0; ++i)
	if (QUIRK_STR_MATCH(quirks[i].bios_vendor, bios_vendor) &&
	    QUIRK_STR_MATCH(quirks[i].maker, maker) &&
	    QUIRK_STR_MATCH(quirks[i].product, product))
		return (quirks[i].quirk);

    return (0);
}

atkbdc_softc_t
*atkbdc_get_softc(int unit)
{
	atkbdc_softc_t *sc;

	if (unit >= sizeof(atkbdc_softc)/sizeof(atkbdc_softc[0]))
		return NULL;
	sc = atkbdc_softc[unit];
	if (sc == NULL) {
		sc = atkbdc_softc[unit]
		   = malloc(sizeof(*sc), M_DEVBUF, M_NOWAIT | M_ZERO);
		if (sc == NULL)
			return NULL;
	}
	return sc;
}

int
atkbdc_probe_unit(int unit, struct resource *port0, struct resource *port1)
{
	if (rman_get_start(port0) <= 0)
		return ENXIO;
	if (rman_get_start(port1) <= 0)
		return ENXIO;
	return 0;
}

int
atkbdc_attach_unit(int unit, atkbdc_softc_t *sc, struct resource *port0,
		   struct resource *port1)
{
	return atkbdc_setup(sc, rman_get_bustag(port0),
			    rman_get_bushandle(port0),
			    rman_get_bushandle(port1));
}

/* the backdoor to the keyboard controller! XXX */
int
atkbdc_configure(void)
{
	bus_space_tag_t tag;
	bus_space_handle_t h0;
	bus_space_handle_t h1;
#if defined(__i386__) || defined(__amd64__)
	volatile int i;
	register_t flags;
#endif
#ifdef __sparc64__
	char name[32];
	phandle_t chosen, node;
	ihandle_t stdin;
	bus_addr_t port0;
	bus_addr_t port1;
	int space;
#else
	int port0;
	int port1;
#endif

	/* XXX: tag should be passed from the caller */
#if defined(__amd64__) || defined(__i386__)
	tag = X86_BUS_SPACE_IO;
#elif defined(__sparc64__)
	tag = &atkbdc_bst_store[0];
#else
#error "define tag!"
#endif

#ifdef __sparc64__
	if ((chosen = OF_finddevice("/chosen")) == -1)
		return 0;
	if (OF_getprop(chosen, "stdin", &stdin, sizeof(stdin)) == -1)
		return 0;
	if ((node = OF_instance_to_package(stdin)) == -1)
		return 0;
	if (OF_getprop(node, "name", name, sizeof(name)) == -1)
		return 0;
	name[sizeof(name) - 1] = '\0';
	if (strcmp(name, "kb_ps2") != 0)
		return 0;
	/*
	 * The stdin handle points to an instance of a PS/2 keyboard
	 * package but we want the 8042 controller, which is the parent
	 * of that keyboard node.
	 */
	if ((node = OF_parent(node)) == 0)
		return 0;
	if (OF_decode_addr(node, 0, &space, &port0) != 0)
		return 0;
	h0 = sparc64_fake_bustag(space, port0, tag);
	bus_space_subregion(tag, h0, KBD_DATA_PORT, 1, &h0);
	if (OF_decode_addr(node, 1, &space, &port1) != 0)
		return 0;
	h1 = sparc64_fake_bustag(space, port1, tag);
	bus_space_subregion(tag, h1, KBD_STATUS_PORT, 1, &h1);
#else
	port0 = IO_KBD;
	resource_int_value("atkbdc", 0, "port", &port0);
	port1 = IO_KBD + KBD_STATUS_PORT;
#ifdef notyet
	bus_space_map(tag, port0, IO_KBDSIZE, 0, &h0);
	bus_space_map(tag, port1, IO_KBDSIZE, 0, &h1);
#else
	h0 = (bus_space_handle_t)port0;
	h1 = (bus_space_handle_t)port1;
#endif
#endif

#if defined(__i386__) || defined(__amd64__)
	/*
	 * Check if we really have AT keyboard controller. Poll status
	 * register until we get "all clear" indication. If no such
	 * indication comes, it probably means that there is no AT
	 * keyboard controller present. Give up in such case. Check relies
	 * on the fact that reading from non-existing in/out port returns
	 * 0xff on i386. May or may not be true on other platforms.
	 */
	flags = intr_disable();
	for (i = 0; i != 65535; i++) {
		if ((bus_space_read_1(tag, h1, 0) & 0x2) == 0)
			break;
	}
	intr_restore(flags);
	if (i == 65535)
                return ENXIO;
#endif

	return atkbdc_setup(atkbdc_softc[0], tag, h0, h1);
}

static int
atkbdc_setup(atkbdc_softc_t *sc, bus_space_tag_t tag, bus_space_handle_t h0,
	     bus_space_handle_t h1)
{
#if defined(__amd64__)
	u_int64_t tscval[3], read_delay;
	register_t flags;
#endif

	if (sc->ioh0 == 0) {	/* XXX */
	    sc->command_byte = -1;
	    sc->command_mask = 0;
	    sc->lock = FALSE;
	    sc->kbd.head = sc->kbd.tail = 0;
	    sc->aux.head = sc->aux.tail = 0;
#if KBDIO_DEBUG >= 2
	    sc->kbd.call_count = 0;
	    sc->kbd.qcount = sc->kbd.max_qcount = 0;
	    sc->aux.call_count = 0;
	    sc->aux.qcount = sc->aux.max_qcount = 0;
#endif
	}
	sc->iot = tag;
	sc->ioh0 = h0;
	sc->ioh1 = h1;

#if defined(__amd64__)
	/*
	 * On certain chipsets AT keyboard controller isn't present and is
	 * emulated by BIOS using SMI interrupt. On those chipsets reading
	 * from the status port may be thousand times slower than usually.
	 * Sometimes this emilation is not working properly resulting in
	 * commands timing our and since we assume that inb() operation
	 * takes very little time to complete we need to adjust number of
	 * retries to keep waiting time within a designed limits (100ms).
	 * Measure time it takes to make read_status() call and adjust
	 * number of retries accordingly.
	 */
	flags = intr_disable();
	tscval[0] = rdtsc();
	read_status(sc);
	tscval[1] = rdtsc();
	DELAY(1000);
	tscval[2] = rdtsc();
	intr_restore(flags);
	read_delay = tscval[1] - tscval[0];
	read_delay /= (tscval[2] - tscval[1]) / 1000;
	sc->retry = 100000 / ((KBDD_DELAYTIME * 2) + read_delay);
#else
	sc->retry = 5000;
#endif
	sc->quirks = atkbdc_getquirks();

	return 0;
}

/* open a keyboard controller */
KBDC
atkbdc_open(int unit)
{
    if (unit <= 0)
	unit = 0;
    if (unit >= MAXKBDC)
	return NULL;
    if ((atkbdc_softc[unit]->port0 != NULL)
	|| (atkbdc_softc[unit]->ioh0 != 0))		/* XXX */
	return (KBDC)atkbdc_softc[unit];
    return NULL;
}

/*
 * I/O access arbitration in `kbdio'
 *
 * The `kbdio' module uses a simplistic convention to arbitrate
 * I/O access to the controller/keyboard/mouse. The convention requires
 * close cooperation of the calling device driver.
 *
 * The device drivers which utilize the `kbdio' module are assumed to
 * have the following set of routines.
 *    a. An interrupt handler (the bottom half of the driver).
 *    b. Timeout routines which may briefly poll the keyboard controller.
 *    c. Routines outside interrupt context (the top half of the driver).
 * They should follow the rules below:
 *    1. The interrupt handler may assume that it always has full access
 *       to the controller/keyboard/mouse.
 *    2. The other routines must issue `spltty()' if they wish to
 *       prevent the interrupt handler from accessing
 *       the controller/keyboard/mouse.
 *    3. The timeout routines and the top half routines of the device driver
 *       arbitrate I/O access by observing the lock flag in `kbdio'.
 *       The flag is manipulated via `kbdc_lock()'; when one wants to
 *       perform I/O, call `kbdc_lock(kbdc, TRUE)' and proceed only if
 *       the call returns with TRUE. Otherwise the caller must back off.
 *       Call `kbdc_lock(kbdc, FALSE)' when necessary I/O operaion
 *       is finished. This mechanism does not prevent the interrupt
 *       handler from being invoked at any time and carrying out I/O.
 *       Therefore, `spltty()' must be strategically placed in the device
 *       driver code. Also note that the timeout routine may interrupt
 *       `kbdc_lock()' called by the top half of the driver, but this
 *       interruption is OK so long as the timeout routine observes
 *       rule 4 below.
 *    4. The interrupt and timeout routines should not extend I/O operation
 *       across more than one interrupt or timeout; they must complete any
 *       necessary I/O operation within one invocation of the routine.
 *       This means that if the timeout routine acquires the lock flag,
 *       it must reset the flag to FALSE before it returns.
 */

/* set/reset polling lock */
int
kbdc_lock(KBDC p, int lock)
{
    int prevlock;

    prevlock = kbdcp(p)->lock;
    kbdcp(p)->lock = lock;

    return (prevlock != lock);
}

/* check if any data is waiting to be processed */
int
kbdc_data_ready(KBDC p)
{
    return (availq(&kbdcp(p)->kbd) || availq(&kbdcp(p)->aux)
	|| (read_status(kbdcp(p)) & KBDS_ANY_BUFFER_FULL));
}

/* queuing functions */

static int
addq(kqueue *q, int c)
{
    if (nextq(q->tail) != q->head) {
	q->q[q->tail] = c;
	q->tail = nextq(q->tail);
#if KBDIO_DEBUG >= 2
        ++q->call_count;
        ++q->qcount;
	if (q->qcount > q->max_qcount)
            q->max_qcount = q->qcount;
#endif
	return TRUE;
    }
    return FALSE;
}

static int
removeq(kqueue *q)
{
    int c;

    if (q->tail != q->head) {
	c = q->q[q->head];
	q->head = nextq(q->head);
#if KBDIO_DEBUG >= 2
        --q->qcount;
#endif
	return c;
    }
    return -1;
}

/*
 * device I/O routines
 */
static int
wait_while_controller_busy(struct atkbdc_softc *kbdc)
{
    int retry;
    int f;

    /* CPU will stay inside the loop for 100msec at most */
    retry = kbdc->retry;

    while ((f = read_status(kbdc)) & KBDS_INPUT_BUFFER_FULL) {
	if ((f & KBDS_BUFFER_FULL) == KBDS_KBD_BUFFER_FULL) {
	    DELAY(KBDD_DELAYTIME);
	    addq(&kbdc->kbd, read_data(kbdc));
	} else if ((f & KBDS_BUFFER_FULL) == KBDS_AUX_BUFFER_FULL) {
	    DELAY(KBDD_DELAYTIME);
	    addq(&kbdc->aux, read_data(kbdc));
	}
        DELAY(KBDC_DELAYTIME);
        if (--retry < 0)
    	    return FALSE;
    }
    return TRUE;
}

/*
 * wait for any data; whether it's from the controller,
 * the keyboard, or the aux device.
 */
static int
wait_for_data(struct atkbdc_softc *kbdc)
{
    int retry;
    int f;

    /* CPU will stay inside the loop for 200msec at most */
    retry = kbdc->retry * 2;

    while ((f = read_status(kbdc) & KBDS_ANY_BUFFER_FULL) == 0) {
        DELAY(KBDC_DELAYTIME);
        if (--retry < 0)
    	    return 0;
    }
    DELAY(KBDD_DELAYTIME);
    return f;
}

/* wait for data from the keyboard */
static int
wait_for_kbd_data(struct atkbdc_softc *kbdc)
{
    int retry;
    int f;

    /* CPU will stay inside the loop for 200msec at most */
    retry = kbdc->retry * 2;

    while ((f = read_status(kbdc) & KBDS_BUFFER_FULL)
	    != KBDS_KBD_BUFFER_FULL) {
        if (f == KBDS_AUX_BUFFER_FULL) {
	    DELAY(KBDD_DELAYTIME);
	    addq(&kbdc->aux, read_data(kbdc));
	}
        DELAY(KBDC_DELAYTIME);
        if (--retry < 0)
    	    return 0;
    }
    DELAY(KBDD_DELAYTIME);
    return f;
}

/*
 * wait for an ACK(FAh), RESEND(FEh), or RESET_FAIL(FCh) from the keyboard.
 * queue anything else.
 */
static int
wait_for_kbd_ack(struct atkbdc_softc *kbdc)
{
    int retry;
    int f;
    int b;

    /* CPU will stay inside the loop for 200msec at most */
    retry = kbdc->retry * 2;

    while (retry-- > 0) {
        if ((f = read_status(kbdc)) & KBDS_ANY_BUFFER_FULL) {
	    DELAY(KBDD_DELAYTIME);
            b = read_data(kbdc);
	    if ((f & KBDS_BUFFER_FULL) == KBDS_KBD_BUFFER_FULL) {
		if ((b == KBD_ACK) || (b == KBD_RESEND)
		    || (b == KBD_RESET_FAIL))
		    return b;
		addq(&kbdc->kbd, b);
	    } else if ((f & KBDS_BUFFER_FULL) == KBDS_AUX_BUFFER_FULL) {
		addq(&kbdc->aux, b);
	    }
	}
        DELAY(KBDC_DELAYTIME);
    }
    return -1;
}

/* wait for data from the aux device */
static int
wait_for_aux_data(struct atkbdc_softc *kbdc)
{
    int retry;
    int f;

    /* CPU will stay inside the loop for 200msec at most */
    retry = kbdc->retry * 2;

    while ((f = read_status(kbdc) & KBDS_BUFFER_FULL)
	    != KBDS_AUX_BUFFER_FULL) {
        if (f == KBDS_KBD_BUFFER_FULL) {
	    DELAY(KBDD_DELAYTIME);
	    addq(&kbdc->kbd, read_data(kbdc));
	}
        DELAY(KBDC_DELAYTIME);
        if (--retry < 0)
    	    return 0;
    }
    DELAY(KBDD_DELAYTIME);
    return f;
}

/*
 * wait for an ACK(FAh), RESEND(FEh), or RESET_FAIL(FCh) from the aux device.
 * queue anything else.
 */
static int
wait_for_aux_ack(struct atkbdc_softc *kbdc)
{
    int retry;
    int f;
    int b;

    /* CPU will stay inside the loop for 200msec at most */
    retry = kbdc->retry * 2;

    while (retry-- > 0) {
        if ((f = read_status(kbdc)) & KBDS_ANY_BUFFER_FULL) {
	    DELAY(KBDD_DELAYTIME);
            b = read_data(kbdc);
	    if ((f & KBDS_BUFFER_FULL) == KBDS_AUX_BUFFER_FULL) {
		if ((b == PSM_ACK) || (b == PSM_RESEND)
		    || (b == PSM_RESET_FAIL))
		    return b;
		addq(&kbdc->aux, b);
	    } else if ((f & KBDS_BUFFER_FULL) == KBDS_KBD_BUFFER_FULL) {
		addq(&kbdc->kbd, b);
	    }
	}
        DELAY(KBDC_DELAYTIME);
    }
    return -1;
}

/* write a one byte command to the controller */
int
write_controller_command(KBDC p, int c)
{
    if (!wait_while_controller_busy(kbdcp(p)))
	return FALSE;
    write_command(kbdcp(p), c);
    return TRUE;
}

/* write a one byte data to the controller */
int
write_controller_data(KBDC p, int c)
{
    if (!wait_while_controller_busy(kbdcp(p)))
	return FALSE;
    write_data(kbdcp(p), c);
    return TRUE;
}

/* write a one byte keyboard command */
int
write_kbd_command(KBDC p, int c)
{
    if (!wait_while_controller_busy(kbdcp(p)))
	return FALSE;
    write_data(kbdcp(p), c);
    return TRUE;
}

/* write a one byte auxiliary device command */
int
write_aux_command(KBDC p, int c)
{
    if (!write_controller_command(p, KBDC_WRITE_TO_AUX))
	return FALSE;
    return write_controller_data(p, c);
}

/* send a command to the keyboard and wait for ACK */
int
send_kbd_command(KBDC p, int c)
{
    int retry = KBD_MAXRETRY;
    int res = -1;

    while (retry-- > 0) {
	if (!write_kbd_command(p, c))
	    continue;
        res = wait_for_kbd_ack(kbdcp(p));
        if (res == KBD_ACK)
    	    break;
    }
    return res;
}

/* send a command to the auxiliary device and wait for ACK */
int
send_aux_command(KBDC p, int c)
{
    int retry = KBD_MAXRETRY;
    int res = -1;

    while (retry-- > 0) {
	if (!write_aux_command(p, c))
	    continue;
	/*
	 * FIXME: XXX
	 * The aux device may have already sent one or two bytes of
	 * status data, when a command is received. It will immediately
	 * stop data transmission, thus, leaving an incomplete data
	 * packet in our buffer. We have to discard any unprocessed
	 * data in order to remove such packets. Well, we may remove
	 * unprocessed, but necessary data byte as well...
	 */
	emptyq(&kbdcp(p)->aux);
        res = wait_for_aux_ack(kbdcp(p));
        if (res == PSM_ACK)
    	    break;
    }
    return res;
}

/* send a command and a data to the keyboard, wait for ACKs */
int
send_kbd_command_and_data(KBDC p, int c, int d)
{
    int retry;
    int res = -1;

    for (retry = KBD_MAXRETRY; retry > 0; --retry) {
	if (!write_kbd_command(p, c))
	    continue;
        res = wait_for_kbd_ack(kbdcp(p));
        if (res == KBD_ACK)
    	    break;
        else if (res != KBD_RESEND)
    	    return res;
    }
    if (retry <= 0)
	return res;

    for (retry = KBD_MAXRETRY, res = -1; retry > 0; --retry) {
	if (!write_kbd_command(p, d))
	    continue;
        res = wait_for_kbd_ack(kbdcp(p));
        if (res != KBD_RESEND)
    	    break;
    }
    return res;
}

/* send a command and a data to the auxiliary device, wait for ACKs */
int
send_aux_command_and_data(KBDC p, int c, int d)
{
    int retry;
    int res = -1;

    for (retry = KBD_MAXRETRY; retry > 0; --retry) {
	if (!write_aux_command(p, c))
	    continue;
	emptyq(&kbdcp(p)->aux);
        res = wait_for_aux_ack(kbdcp(p));
        if (res == PSM_ACK)
    	    break;
        else if (res != PSM_RESEND)
    	    return res;
    }
    if (retry <= 0)
	return res;

    for (retry = KBD_MAXRETRY, res = -1; retry > 0; --retry) {
	if (!write_aux_command(p, d))
	    continue;
        res = wait_for_aux_ack(kbdcp(p));
        if (res != PSM_RESEND)
    	    break;
    }
    return res;
}

/*
 * read one byte from any source; whether from the controller,
 * the keyboard, or the aux device
 */
int
read_controller_data(KBDC p)
{
    if (availq(&kbdcp(p)->kbd))
        return removeq(&kbdcp(p)->kbd);
    if (availq(&kbdcp(p)->aux))
        return removeq(&kbdcp(p)->aux);
    if (!wait_for_data(kbdcp(p)))
        return -1;		/* timeout */
    return read_data(kbdcp(p));
}

#if KBDIO_DEBUG >= 2
static int call = 0;
#endif

/* read one byte from the keyboard */
int
read_kbd_data(KBDC p)
{
#if KBDIO_DEBUG >= 2
    if (++call > 2000) {
	call = 0;
	log(LOG_DEBUG, "kbdc: kbd q: %d calls, max %d chars, "
			     "aux q: %d calls, max %d chars\n",
		       kbdcp(p)->kbd.call_count, kbdcp(p)->kbd.max_qcount,
		       kbdcp(p)->aux.call_count, kbdcp(p)->aux.max_qcount);
    }
#endif

    if (availq(&kbdcp(p)->kbd))
        return removeq(&kbdcp(p)->kbd);
    if (!wait_for_kbd_data(kbdcp(p)))
        return -1;		/* timeout */
    return read_data(kbdcp(p));
}

/* read one byte from the keyboard, but return immediately if
 * no data is waiting
 */
int
read_kbd_data_no_wait(KBDC p)
{
    int f;

#if KBDIO_DEBUG >= 2
    if (++call > 2000) {
	call = 0;
	log(LOG_DEBUG, "kbdc: kbd q: %d calls, max %d chars, "
			     "aux q: %d calls, max %d chars\n",
		       kbdcp(p)->kbd.call_count, kbdcp(p)->kbd.max_qcount,
		       kbdcp(p)->aux.call_count, kbdcp(p)->aux.max_qcount);
    }
#endif

    if (availq(&kbdcp(p)->kbd))
        return removeq(&kbdcp(p)->kbd);
    f = read_status(kbdcp(p)) & KBDS_BUFFER_FULL;
    if (f == KBDS_AUX_BUFFER_FULL) {
        DELAY(KBDD_DELAYTIME);
        addq(&kbdcp(p)->aux, read_data(kbdcp(p)));
        f = read_status(kbdcp(p)) & KBDS_BUFFER_FULL;
    }
    if (f == KBDS_KBD_BUFFER_FULL) {
        DELAY(KBDD_DELAYTIME);
        return read_data(kbdcp(p));
    }
    return -1;		/* no data */
}

/* read one byte from the aux device */
int
read_aux_data(KBDC p)
{
    if (availq(&kbdcp(p)->aux))
        return removeq(&kbdcp(p)->aux);
    if (!wait_for_aux_data(kbdcp(p)))
        return -1;		/* timeout */
    return read_data(kbdcp(p));
}

/* read one byte from the aux device, but return immediately if
 * no data is waiting
 */
int
read_aux_data_no_wait(KBDC p)
{
    int f;

    if (availq(&kbdcp(p)->aux))
        return removeq(&kbdcp(p)->aux);
    f = read_status(kbdcp(p)) & KBDS_BUFFER_FULL;
    if (f == KBDS_KBD_BUFFER_FULL) {
        DELAY(KBDD_DELAYTIME);
        addq(&kbdcp(p)->kbd, read_data(kbdcp(p)));
        f = read_status(kbdcp(p)) & KBDS_BUFFER_FULL;
    }
    if (f == KBDS_AUX_BUFFER_FULL) {
        DELAY(KBDD_DELAYTIME);
        return read_data(kbdcp(p));
    }
    return -1;		/* no data */
}

/* discard data from the keyboard */
void
empty_kbd_buffer(KBDC p, int wait)
{
    int t;
    int b;
    int f;
#if KBDIO_DEBUG >= 2
    int c1 = 0;
    int c2 = 0;
#endif
    int delta = 2;

    for (t = wait; t > 0; ) {
        if ((f = read_status(kbdcp(p))) & KBDS_ANY_BUFFER_FULL) {
	    DELAY(KBDD_DELAYTIME);
            b = read_data(kbdcp(p));
	    if ((f & KBDS_BUFFER_FULL) == KBDS_AUX_BUFFER_FULL) {
		addq(&kbdcp(p)->aux, b);
#if KBDIO_DEBUG >= 2
		++c2;
            } else {
		++c1;
#endif
	    }
	    t = wait;
	} else {
	    t -= delta;
	}
        DELAY(delta*1000);
    }
#if KBDIO_DEBUG >= 2
    if ((c1 > 0) || (c2 > 0))
        log(LOG_DEBUG, "kbdc: %d:%d char read (empty_kbd_buffer)\n", c1, c2);
#endif

    emptyq(&kbdcp(p)->kbd);
}

/* discard data from the aux device */
void
empty_aux_buffer(KBDC p, int wait)
{
    int t;
    int b;
    int f;
#if KBDIO_DEBUG >= 2
    int c1 = 0;
    int c2 = 0;
#endif
    int delta = 2;

    for (t = wait; t > 0; ) {
        if ((f = read_status(kbdcp(p))) & KBDS_ANY_BUFFER_FULL) {
	    DELAY(KBDD_DELAYTIME);
            b = read_data(kbdcp(p));
	    if ((f & KBDS_BUFFER_FULL) == KBDS_KBD_BUFFER_FULL) {
		addq(&kbdcp(p)->kbd, b);
#if KBDIO_DEBUG >= 2
		++c1;
            } else {
		++c2;
#endif
	    }
	    t = wait;
	} else {
	    t -= delta;
	}
	DELAY(delta*1000);
    }
#if KBDIO_DEBUG >= 2
    if ((c1 > 0) || (c2 > 0))
        log(LOG_DEBUG, "kbdc: %d:%d char read (empty_aux_buffer)\n", c1, c2);
#endif

    emptyq(&kbdcp(p)->aux);
}

/* discard any data from the keyboard or the aux device */
void
empty_both_buffers(KBDC p, int wait)
{
    int t;
    int f;
    int waited = 0;
#if KBDIO_DEBUG >= 2
    int c1 = 0;
    int c2 = 0;
#endif
    int delta = 2;

    for (t = wait; t > 0; ) {
        if ((f = read_status(kbdcp(p))) & KBDS_ANY_BUFFER_FULL) {
	    DELAY(KBDD_DELAYTIME);
            (void)read_data(kbdcp(p));
#if KBDIO_DEBUG >= 2
	    if ((f & KBDS_BUFFER_FULL) == KBDS_KBD_BUFFER_FULL)
		++c1;
            else
		++c2;
#endif
	    t = wait;
	} else {
	    t -= delta;
	}

	/*
	 * Some systems (Intel/IBM blades) do not have keyboard devices and
	 * will thus hang in this procedure. Time out after delta seconds to
	 * avoid this hang -- the keyboard attach will fail later on.
	 */
        waited += (delta * 1000);
        if (waited == (delta * 1000000))
	    return;

	DELAY(delta*1000);
    }
#if KBDIO_DEBUG >= 2
    if ((c1 > 0) || (c2 > 0))
        log(LOG_DEBUG, "kbdc: %d:%d char read (empty_both_buffers)\n", c1, c2);
#endif

    emptyq(&kbdcp(p)->kbd);
    emptyq(&kbdcp(p)->aux);
}

/* keyboard and mouse device control */

/* NOTE: enable the keyboard port but disable the keyboard
 * interrupt before calling "reset_kbd()".
 */
int
reset_kbd(KBDC p)
{
    int retry = KBD_MAXRETRY;
    int again = KBD_MAXWAIT;
    int c = KBD_RESEND;		/* keep the compiler happy */

    while (retry-- > 0) {
        empty_both_buffers(p, 10);
        if (!write_kbd_command(p, KBDC_RESET_KBD))
	    continue;
	emptyq(&kbdcp(p)->kbd);
        c = read_controller_data(p);
	if (verbose || bootverbose)
            log(LOG_DEBUG, "kbdc: RESET_KBD return code:%04x\n", c);
        if (c == KBD_ACK)	/* keyboard has agreed to reset itself... */
    	    break;
    }
    if (retry < 0)
        return FALSE;

    while (again-- > 0) {
        /* wait awhile, well, in fact we must wait quite loooooooooooong */
        DELAY(KBD_RESETDELAY*1000);
        c = read_controller_data(p);	/* RESET_DONE/RESET_FAIL */
        if (c != -1) 	/* wait again if the controller is not ready */
    	    break;
    }
    if (verbose || bootverbose)
        log(LOG_DEBUG, "kbdc: RESET_KBD status:%04x\n", c);
    if (c != KBD_RESET_DONE)
        return FALSE;
    return TRUE;
}

/* NOTE: enable the aux port but disable the aux interrupt
 * before calling `reset_aux_dev()'.
 */
int
reset_aux_dev(KBDC p)
{
    int retry = KBD_MAXRETRY;
    int again = KBD_MAXWAIT;
    int c = PSM_RESEND;		/* keep the compiler happy */

    while (retry-- > 0) {
        empty_both_buffers(p, 10);
        if (!write_aux_command(p, PSMC_RESET_DEV))
	    continue;
	emptyq(&kbdcp(p)->aux);
	/* NOTE: Compaq Armada laptops require extra delay here. XXX */
	for (again = KBD_MAXWAIT; again > 0; --again) {
            DELAY(KBD_RESETDELAY*1000);
            c = read_aux_data_no_wait(p);
	    if (c != -1)
		break;
	}
        if (verbose || bootverbose)
            log(LOG_DEBUG, "kbdc: RESET_AUX return code:%04x\n", c);
        if (c == PSM_ACK)	/* aux dev is about to reset... */
    	    break;
    }
    if (retry < 0)
        return FALSE;

    for (again = KBD_MAXWAIT; again > 0; --again) {
        /* wait awhile, well, quite looooooooooooong */
        DELAY(KBD_RESETDELAY*1000);
        c = read_aux_data_no_wait(p);	/* RESET_DONE/RESET_FAIL */
        if (c != -1) 	/* wait again if the controller is not ready */
    	    break;
    }
    if (verbose || bootverbose)
        log(LOG_DEBUG, "kbdc: RESET_AUX status:%04x\n", c);
    if (c != PSM_RESET_DONE)	/* reset status */
        return FALSE;

    c = read_aux_data(p);	/* device ID */
    if (verbose || bootverbose)
        log(LOG_DEBUG, "kbdc: RESET_AUX ID:%04x\n", c);
    /* NOTE: we could check the device ID now, but leave it later... */
    return TRUE;
}

/* controller diagnostics and setup */

int
test_controller(KBDC p)
{
    int retry = KBD_MAXRETRY;
    int again = KBD_MAXWAIT;
    int c = KBD_DIAG_FAIL;

    while (retry-- > 0) {
        empty_both_buffers(p, 10);
        if (write_controller_command(p, KBDC_DIAGNOSE))
    	    break;
    }
    if (retry < 0)
        return FALSE;

    emptyq(&kbdcp(p)->kbd);
    while (again-- > 0) {
        /* wait awhile */
        DELAY(KBD_RESETDELAY*1000);
        c = read_controller_data(p);	/* DIAG_DONE/DIAG_FAIL */
        if (c != -1) 	/* wait again if the controller is not ready */
    	    break;
    }
    if (verbose || bootverbose)
        log(LOG_DEBUG, "kbdc: DIAGNOSE status:%04x\n", c);
    return (c == KBD_DIAG_DONE);
}

int
test_kbd_port(KBDC p)
{
    int retry = KBD_MAXRETRY;
    int again = KBD_MAXWAIT;
    int c = -1;

    while (retry-- > 0) {
        empty_both_buffers(p, 10);
        if (write_controller_command(p, KBDC_TEST_KBD_PORT))
    	    break;
    }
    if (retry < 0)
        return FALSE;

    emptyq(&kbdcp(p)->kbd);
    while (again-- > 0) {
        c = read_controller_data(p);
        if (c != -1) 	/* try again if the controller is not ready */
    	    break;
    }
    if (verbose || bootverbose)
        log(LOG_DEBUG, "kbdc: TEST_KBD_PORT status:%04x\n", c);
    return c;
}

int
test_aux_port(KBDC p)
{
    int retry = KBD_MAXRETRY;
    int again = KBD_MAXWAIT;
    int c = -1;

    while (retry-- > 0) {
        empty_both_buffers(p, 10);
        if (write_controller_command(p, KBDC_TEST_AUX_PORT))
    	    break;
    }
    if (retry < 0)
        return FALSE;

    emptyq(&kbdcp(p)->kbd);
    while (again-- > 0) {
        c = read_controller_data(p);
        if (c != -1) 	/* try again if the controller is not ready */
    	    break;
    }
    if (verbose || bootverbose)
        log(LOG_DEBUG, "kbdc: TEST_AUX_PORT status:%04x\n", c);
    return c;
}

int
kbdc_get_device_mask(KBDC p)
{
    return kbdcp(p)->command_mask;
}

void
kbdc_set_device_mask(KBDC p, int mask)
{
    kbdcp(p)->command_mask =
	mask & (((kbdcp(p)->quirks & KBDC_QUIRK_KEEP_ACTIVATED)
	    ? 0 : KBD_KBD_CONTROL_BITS) | KBD_AUX_CONTROL_BITS);
}

int
get_controller_command_byte(KBDC p)
{
    if (kbdcp(p)->command_byte != -1)
	return kbdcp(p)->command_byte;
    if (!write_controller_command(p, KBDC_GET_COMMAND_BYTE))
	return -1;
    emptyq(&kbdcp(p)->kbd);
    kbdcp(p)->command_byte = read_controller_data(p);
    return kbdcp(p)->command_byte;
}

int
set_controller_command_byte(KBDC p, int mask, int command)
{
    if (get_controller_command_byte(p) == -1)
	return FALSE;

    command = (kbdcp(p)->command_byte & ~mask) | (command & mask);
    if (command & KBD_DISABLE_KBD_PORT) {
	if (!write_controller_command(p, KBDC_DISABLE_KBD_PORT))
	    return FALSE;
    }
    if (!write_controller_command(p, KBDC_SET_COMMAND_BYTE))
	return FALSE;
    if (!write_controller_data(p, command))
	return FALSE;
    kbdcp(p)->command_byte = command;

    if (verbose)
        log(LOG_DEBUG, "kbdc: new command byte:%04x (set_controller...)\n",
	    command);

    return TRUE;
}