1 /*- 2 * Copyright (c) 2011 Adrian Chadd, Xenion Pty Ltd. 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer, 10 * without modification. 11 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 12 * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any 13 * redistribution must be conditioned upon including a substantially 14 * similar Disclaimer requirement for further binary redistribution. 15 * 16 * NO WARRANTY 17 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 18 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 19 * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY 20 * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL 21 * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, 22 * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 23 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 24 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER 25 * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 26 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 27 * THE POSSIBILITY OF SUCH DAMAGES. 28 */ 29 30 #include <sys/cdefs.h> 31 __FBSDID("$FreeBSD$"); 32 33 #include "opt_inet.h" 34 #include "opt_ath.h" 35 #include "opt_wlan.h" 36 37 #include <sys/param.h> 38 #include <sys/systm.h> 39 #include <sys/sysctl.h> 40 #include <sys/mbuf.h> 41 #include <sys/malloc.h> 42 #include <sys/lock.h> 43 #include <sys/mutex.h> 44 #include <sys/kernel.h> 45 #include <sys/socket.h> 46 #include <sys/sockio.h> 47 #include <sys/errno.h> 48 #include <sys/callout.h> 49 #include <sys/bus.h> 50 #include <sys/endian.h> 51 #include <sys/kthread.h> 52 #include <sys/taskqueue.h> 53 #include <sys/priv.h> 54 55 #include <machine/bus.h> 56 57 #include <net/if.h> 58 #include <net/if_dl.h> 59 #include <net/if_media.h> 60 #include <net/if_types.h> 61 #include <net/if_arp.h> 62 #include <net/ethernet.h> 63 #include <net/if_llc.h> 64 65 #include <net80211/ieee80211_var.h> 66 #include <net80211/ieee80211_regdomain.h> 67 #ifdef IEEE80211_SUPPORT_SUPERG 68 #include <net80211/ieee80211_superg.h> 69 #endif 70 #ifdef IEEE80211_SUPPORT_TDMA 71 #include <net80211/ieee80211_tdma.h> 72 #endif 73 74 #include <net/bpf.h> 75 76 #ifdef INET 77 #include <netinet/in.h> 78 #include <netinet/if_ether.h> 79 #endif 80 81 #include <dev/ath/if_athvar.h> 82 #include <dev/ath/ath_hal/ah_devid.h> /* XXX for softled */ 83 #include <dev/ath/ath_hal/ah_diagcodes.h> 84 85 #ifdef ATH_TX99_DIAG 86 #include <dev/ath/ath_tx99/ath_tx99.h> 87 #endif 88 89 #include <dev/ath/if_ath_tx_ht.h> 90 91 /* 92 * Setup a 11n rate series structure 93 * 94 * This should be called for both legacy and MCS rates. 95 */ 96 static void 97 ath_rateseries_setup(struct ath_softc *sc, struct ieee80211_node *ni, 98 HAL_11N_RATE_SERIES *series, unsigned int pktlen, uint8_t *rix, 99 uint8_t *try, int flags) 100 { 101 #define HT_RC_2_STREAMS(_rc) ((((_rc) & 0x78) >> 3) + 1) 102 struct ieee80211com *ic = ni->ni_ic; 103 struct ath_hal *ah = sc->sc_ah; 104 HAL_BOOL shortPreamble = AH_FALSE; 105 const HAL_RATE_TABLE *rt = sc->sc_currates; 106 int i; 107 108 if ((ic->ic_flags & IEEE80211_F_SHPREAMBLE) && 109 (ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_PREAMBLE)) 110 shortPreamble = AH_TRUE; 111 112 memset(series, 0, sizeof(HAL_11N_RATE_SERIES) * 4); 113 for (i = 0; i < 4; i++) { 114 /* Only set flags for actual TX attempts */ 115 if (try[i] == 0) 116 continue; 117 118 series[i].Tries = try[i]; 119 120 /* 121 * XXX this isn't strictly correct - sc_txchainmask 122 * XXX isn't the currently active chainmask; 123 * XXX it's the interface chainmask at startup. 124 * XXX It's overridden in the HAL rate scenario function 125 * XXX for now. 126 */ 127 series[i].ChSel = sc->sc_txchainmask; 128 129 if (flags & (HAL_TXDESC_RTSENA | HAL_TXDESC_CTSENA)) 130 series[i].RateFlags |= HAL_RATESERIES_RTS_CTS; 131 132 /* 133 * Transmit 40MHz frames only if the node has negotiated 134 * it rather than whether the node is capable of it or not. 135 * It's subtly different in the hostap case. 136 */ 137 if (ni->ni_chw == 40) 138 series[i].RateFlags |= HAL_RATESERIES_2040; 139 140 /* 141 * Set short-GI only if the node has advertised it 142 * the channel width is suitable, and we support it. 143 * We don't currently have a "negotiated" set of bits - 144 * ni_htcap is what the remote end sends, not what this 145 * node is capable of. 146 */ 147 if (ni->ni_chw == 40 && 148 ic->ic_htcaps & IEEE80211_HTCAP_SHORTGI40 && 149 ni->ni_htcap & IEEE80211_HTCAP_SHORTGI40) 150 series[i].RateFlags |= HAL_RATESERIES_HALFGI; 151 152 if (ni->ni_chw == 20 && 153 ic->ic_htcaps & IEEE80211_HTCAP_SHORTGI20 && 154 ni->ni_htcap & IEEE80211_HTCAP_SHORTGI20) 155 series[i].RateFlags |= HAL_RATESERIES_HALFGI; 156 157 series[i].Rate = rt->info[rix[i]].rateCode; 158 159 /* PktDuration doesn't include slot, ACK, RTS, etc timing - it's just the packet duration */ 160 if (series[i].Rate & IEEE80211_RATE_MCS) { 161 series[i].PktDuration = 162 ath_computedur_ht(pktlen 163 , series[i].Rate 164 , HT_RC_2_STREAMS(series[i].Rate) 165 , series[i].RateFlags & HAL_RATESERIES_2040 166 , series[i].RateFlags & HAL_RATESERIES_HALFGI); 167 } else { 168 if (shortPreamble) 169 series[i].Rate |= rt->info[rix[i]].shortPreamble; 170 series[i].PktDuration = ath_hal_computetxtime(ah, 171 rt, pktlen, rix[i], shortPreamble); 172 } 173 } 174 #undef HT_RC_2_STREAMS 175 } 176 177 #if 0 178 static void 179 ath_rateseries_print(HAL_11N_RATE_SERIES *series) 180 { 181 int i; 182 for (i = 0; i < 4; i++) { 183 printf("series %d: rate %x; tries %d; pktDuration %d; chSel %d; rateFlags %x\n", 184 i, 185 series[i].Rate, 186 series[i].Tries, 187 series[i].PktDuration, 188 series[i].ChSel, 189 series[i].RateFlags); 190 } 191 } 192 #endif 193 194 /* 195 * Setup the 11n rate scenario and burst duration for the given TX descriptor 196 * list. 197 * 198 * This isn't useful for sending beacon frames, which has different needs 199 * wrt what's passed into the rate scenario function. 200 */ 201 202 void 203 ath_buf_set_rate(struct ath_softc *sc, struct ieee80211_node *ni, struct ath_buf *bf, 204 int pktlen, int flags, uint8_t ctsrate, int is_pspoll, uint8_t *rix, uint8_t *try) 205 { 206 HAL_11N_RATE_SERIES series[4]; 207 struct ath_desc *ds = bf->bf_desc; 208 struct ath_desc *lastds = NULL; 209 struct ath_hal *ah = sc->sc_ah; 210 211 /* Setup rate scenario */ 212 memset(&series, 0, sizeof(series)); 213 214 ath_rateseries_setup(sc, ni, series, pktlen, rix, try, flags); 215 216 /* Enforce AR5416 aggregate limit - can't do RTS w/ an agg frame > 8k */ 217 218 /* Enforce RTS and CTS are mutually exclusive */ 219 220 /* Get a pointer to the last tx descriptor in the list */ 221 lastds = &bf->bf_desc[bf->bf_nseg - 1]; 222 223 #if 0 224 printf("pktlen: %d; flags 0x%x\n", pktlen, flags); 225 ath_rateseries_print(series); 226 #endif 227 228 /* Set rate scenario */ 229 ath_hal_set11nratescenario(ah, ds, 230 !is_pspoll, /* whether to override the duration or not */ 231 /* don't allow hardware to override the duration on ps-poll packets */ 232 ctsrate, /* rts/cts rate */ 233 series, /* 11n rate series */ 234 4, /* number of series */ 235 flags); 236 237 /* Setup the last descriptor in the chain */ 238 ath_hal_setuplasttxdesc(ah, lastds, ds); 239 240 /* Set burst duration */ 241 /* This should only be done if aggregate protection is enabled */ 242 //ath_hal_set11nburstduration(ah, ds, 8192); 243 } 244