1 /*- 2 * Copyright (c) 2013 Adrian Chadd <adrian@FreeBSD.org> 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer, 10 * without modification. 11 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 12 * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any 13 * redistribution must be conditioned upon including a substantially 14 * similar Disclaimer requirement for further binary redistribution. 15 * 16 * NO WARRANTY 17 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 18 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 19 * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY 20 * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL 21 * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, 22 * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 23 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 24 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER 25 * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 26 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 27 * THE POSSIBILITY OF SUCH DAMAGES. 28 * 29 * $FreeBSD$ 30 */ 31 #include <sys/cdefs.h> 32 __FBSDID("$FreeBSD$"); 33 34 /* 35 * Implement some basic spectral scan control logic. 36 */ 37 #include "opt_ath.h" 38 #include "opt_inet.h" 39 #include "opt_wlan.h" 40 41 #include <sys/param.h> 42 #include <sys/systm.h> 43 #include <sys/sysctl.h> 44 #include <sys/kernel.h> 45 #include <sys/lock.h> 46 #include <sys/mutex.h> 47 #include <sys/errno.h> 48 49 #include <machine/bus.h> 50 #include <machine/resource.h> 51 #include <sys/bus.h> 52 53 #include <sys/socket.h> 54 55 #include <net/if.h> 56 #include <net/if_media.h> 57 #include <net/if_arp.h> 58 #include <net/ethernet.h> /* XXX for ether_sprintf */ 59 60 #include <net80211/ieee80211_var.h> 61 62 #include <net/bpf.h> 63 64 #ifdef INET 65 #include <netinet/in.h> 66 #include <netinet/if_ether.h> 67 #endif 68 69 #include <dev/ath/if_athvar.h> 70 #include <dev/ath/if_ath_spectral.h> 71 72 #include <dev/ath/ath_hal/ah_desc.h> 73 74 struct ath_spectral_state { 75 HAL_SPECTRAL_PARAM spectral_state; 76 77 /* 78 * Should we enable spectral scan upon 79 * each network interface reset/change? 80 * 81 * This is intended to allow spectral scan 82 * frame reporting during channel scans. 83 * 84 * Later on it can morph into a larger 85 * scale config method where it pushes 86 * a "channel scan" config into the hardware 87 * rather than just the spectral_state 88 * config. 89 */ 90 int spectral_enable_after_reset; 91 }; 92 93 /* 94 * Methods which are required 95 */ 96 97 /* 98 * Attach spectral to the given interface 99 */ 100 int 101 ath_spectral_attach(struct ath_softc *sc) 102 { 103 struct ath_spectral_state *ss; 104 105 /* 106 * If spectral isn't supported, don't error - just 107 * quietly complete. 108 */ 109 if (! ath_hal_spectral_supported(sc->sc_ah)) 110 return (0); 111 112 ss = malloc(sizeof(struct ath_spectral_state), 113 M_TEMP, M_WAITOK | M_ZERO); 114 115 if (ss == NULL) { 116 device_printf(sc->sc_dev, "%s: failed to alloc memory\n", 117 __func__); 118 return (-ENOMEM); 119 } 120 121 sc->sc_spectral = ss; 122 123 (void) ath_hal_spectral_get_config(sc->sc_ah, &ss->spectral_state); 124 125 return (0); 126 } 127 128 /* 129 * Detach spectral from the given interface 130 */ 131 int 132 ath_spectral_detach(struct ath_softc *sc) 133 { 134 135 if (! ath_hal_spectral_supported(sc->sc_ah)) 136 return (0); 137 138 if (sc->sc_spectral != NULL) { 139 free(sc->sc_spectral, M_TEMP); 140 } 141 return (0); 142 } 143 144 /* 145 * Check whether spectral needs enabling and if so, 146 * flip it on. 147 */ 148 int 149 ath_spectral_enable(struct ath_softc *sc, struct ieee80211_channel *ch) 150 { 151 struct ath_spectral_state *ss = sc->sc_spectral; 152 153 /* Default to disable spectral PHY reporting */ 154 sc->sc_dospectral = 0; 155 156 if (ss == NULL) 157 return (0); 158 159 if (ss->spectral_enable_after_reset) { 160 ath_hal_spectral_configure(sc->sc_ah, 161 &ss->spectral_state); 162 (void) ath_hal_spectral_start(sc->sc_ah); 163 sc->sc_dospectral = 1; 164 } 165 return (0); 166 } 167 168 /* 169 * Handle ioctl requests from the diagnostic interface. 170 * 171 * The initial part of this code resembles ath_ioctl_diag(); 172 * it's likely a good idea to reduce duplication between 173 * these two routines. 174 */ 175 int 176 ath_ioctl_spectral(struct ath_softc *sc, struct ath_diag *ad) 177 { 178 unsigned int id = ad->ad_id & ATH_DIAG_ID; 179 void *indata = NULL; 180 void *outdata = NULL; 181 u_int32_t insize = ad->ad_in_size; 182 u_int32_t outsize = ad->ad_out_size; 183 int error = 0; 184 HAL_SPECTRAL_PARAM peout; 185 HAL_SPECTRAL_PARAM *pe; 186 struct ath_spectral_state *ss = sc->sc_spectral; 187 int val; 188 189 if (! ath_hal_spectral_supported(sc->sc_ah)) 190 return (EINVAL); 191 192 if (ad->ad_id & ATH_DIAG_IN) { 193 /* 194 * Copy in data. 195 */ 196 indata = malloc(insize, M_TEMP, M_NOWAIT); 197 if (indata == NULL) { 198 error = ENOMEM; 199 goto bad; 200 } 201 error = copyin(ad->ad_in_data, indata, insize); 202 if (error) 203 goto bad; 204 } 205 if (ad->ad_id & ATH_DIAG_DYN) { 206 /* 207 * Allocate a buffer for the results (otherwise the HAL 208 * returns a pointer to a buffer where we can read the 209 * results). Note that we depend on the HAL leaving this 210 * pointer for us to use below in reclaiming the buffer; 211 * may want to be more defensive. 212 */ 213 outdata = malloc(outsize, M_TEMP, M_NOWAIT); 214 if (outdata == NULL) { 215 error = ENOMEM; 216 goto bad; 217 } 218 } 219 switch (id) { 220 case SPECTRAL_CONTROL_GET_PARAMS: 221 memset(&peout, 0, sizeof(peout)); 222 outsize = sizeof(HAL_SPECTRAL_PARAM); 223 ath_hal_spectral_get_config(sc->sc_ah, &peout); 224 pe = (HAL_SPECTRAL_PARAM *) outdata; 225 memcpy(pe, &peout, sizeof(*pe)); 226 break; 227 case SPECTRAL_CONTROL_SET_PARAMS: 228 if (insize < sizeof(HAL_SPECTRAL_PARAM)) { 229 error = EINVAL; 230 break; 231 } 232 pe = (HAL_SPECTRAL_PARAM *) indata; 233 ath_hal_spectral_configure(sc->sc_ah, pe); 234 /* Save a local copy of the updated parameters */ 235 ath_hal_spectral_get_config(sc->sc_ah, 236 &ss->spectral_state); 237 break; 238 case SPECTRAL_CONTROL_START: 239 ath_hal_spectral_configure(sc->sc_ah, 240 &ss->spectral_state); 241 (void) ath_hal_spectral_start(sc->sc_ah); 242 sc->sc_dospectral = 1; 243 /* XXX need to update the PHY mask in the driver */ 244 break; 245 case SPECTRAL_CONTROL_STOP: 246 (void) ath_hal_spectral_stop(sc->sc_ah); 247 sc->sc_dospectral = 0; 248 /* XXX need to update the PHY mask in the driver */ 249 break; 250 case SPECTRAL_CONTROL_ENABLE_AT_RESET: 251 if (insize < sizeof(int)) { 252 device_printf(sc->sc_dev, "%d != %d\n", 253 insize, 254 (int) sizeof(int)); 255 error = EINVAL; 256 break; 257 } 258 if (indata == NULL) { 259 device_printf(sc->sc_dev, "indata=NULL\n"); 260 error = EINVAL; 261 break; 262 } 263 val = * ((int *) indata); 264 if (val == 0) 265 ss->spectral_enable_after_reset = 0; 266 else 267 ss->spectral_enable_after_reset = 1; 268 break; 269 case SPECTRAL_CONTROL_ENABLE: 270 /* XXX TODO */ 271 case SPECTRAL_CONTROL_DISABLE: 272 /* XXX TODO */ 273 break; 274 default: 275 error = EINVAL; 276 } 277 if (outsize < ad->ad_out_size) 278 ad->ad_out_size = outsize; 279 if (outdata && copyout(outdata, ad->ad_out_data, ad->ad_out_size)) 280 error = EFAULT; 281 bad: 282 if ((ad->ad_id & ATH_DIAG_IN) && indata != NULL) 283 free(indata, M_TEMP); 284 if ((ad->ad_id & ATH_DIAG_DYN) && outdata != NULL) 285 free(outdata, M_TEMP); 286 return (error); 287 } 288 289