1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 2013 Adrian Chadd <adrian@FreeBSD.org> 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer, 12 * without modification. 13 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 14 * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any 15 * redistribution must be conditioned upon including a substantially 16 * similar Disclaimer requirement for further binary redistribution. 17 * 18 * NO WARRANTY 19 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 21 * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY 22 * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL 23 * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, 24 * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER 27 * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 29 * THE POSSIBILITY OF SUCH DAMAGES. 30 * 31 * $FreeBSD$ 32 */ 33 #include <sys/cdefs.h> 34 __FBSDID("$FreeBSD$"); 35 36 /* 37 * Implement some basic spectral scan control logic. 38 */ 39 #include "opt_ath.h" 40 #include "opt_inet.h" 41 #include "opt_wlan.h" 42 43 #include <sys/param.h> 44 #include <sys/systm.h> 45 #include <sys/sysctl.h> 46 #include <sys/kernel.h> 47 #include <sys/lock.h> 48 #include <sys/malloc.h> 49 #include <sys/mutex.h> 50 #include <sys/errno.h> 51 52 #include <machine/bus.h> 53 #include <machine/resource.h> 54 #include <sys/bus.h> 55 56 #include <sys/socket.h> 57 58 #include <net/if.h> 59 #include <net/if_var.h> 60 #include <net/if_media.h> 61 #include <net/if_arp.h> 62 #include <net/ethernet.h> /* XXX for ether_sprintf */ 63 64 #include <net80211/ieee80211_var.h> 65 66 #include <net/bpf.h> 67 68 #ifdef INET 69 #include <netinet/in.h> 70 #include <netinet/if_ether.h> 71 #endif 72 73 #include <dev/ath/if_athvar.h> 74 #include <dev/ath/if_ath_spectral.h> 75 #include <dev/ath/if_ath_misc.h> 76 77 #include <dev/ath/ath_hal/ah_desc.h> 78 79 struct ath_spectral_state { 80 HAL_SPECTRAL_PARAM spectral_state; 81 82 /* 83 * Should we enable spectral scan upon 84 * each network interface reset/change? 85 * 86 * This is intended to allow spectral scan 87 * frame reporting during channel scans. 88 * 89 * Later on it can morph into a larger 90 * scale config method where it pushes 91 * a "channel scan" config into the hardware 92 * rather than just the spectral_state 93 * config. 94 */ 95 int spectral_enable_after_reset; 96 }; 97 98 /* 99 * Methods which are required 100 */ 101 102 /* 103 * Attach spectral to the given interface 104 */ 105 int 106 ath_spectral_attach(struct ath_softc *sc) 107 { 108 struct ath_spectral_state *ss; 109 110 /* 111 * If spectral isn't supported, don't error - just 112 * quietly complete. 113 */ 114 if (! ath_hal_spectral_supported(sc->sc_ah)) 115 return (0); 116 117 ss = malloc(sizeof(struct ath_spectral_state), 118 M_TEMP, M_WAITOK | M_ZERO); 119 120 if (ss == NULL) { 121 device_printf(sc->sc_dev, "%s: failed to alloc memory\n", 122 __func__); 123 return (-ENOMEM); 124 } 125 126 sc->sc_spectral = ss; 127 128 (void) ath_hal_spectral_get_config(sc->sc_ah, &ss->spectral_state); 129 130 return (0); 131 } 132 133 /* 134 * Detach spectral from the given interface 135 */ 136 int 137 ath_spectral_detach(struct ath_softc *sc) 138 { 139 140 if (! ath_hal_spectral_supported(sc->sc_ah)) 141 return (0); 142 143 if (sc->sc_spectral != NULL) { 144 free(sc->sc_spectral, M_TEMP); 145 } 146 return (0); 147 } 148 149 /* 150 * Check whether spectral needs enabling and if so, 151 * flip it on. 152 */ 153 int 154 ath_spectral_enable(struct ath_softc *sc, struct ieee80211_channel *ch) 155 { 156 struct ath_spectral_state *ss = sc->sc_spectral; 157 158 /* Default to disable spectral PHY reporting */ 159 sc->sc_dospectral = 0; 160 161 if (ss == NULL) 162 return (0); 163 164 if (ss->spectral_enable_after_reset) { 165 ath_hal_spectral_configure(sc->sc_ah, 166 &ss->spectral_state); 167 (void) ath_hal_spectral_start(sc->sc_ah); 168 sc->sc_dospectral = 1; 169 } 170 return (0); 171 } 172 173 /* 174 * Handle ioctl requests from the diagnostic interface. 175 * 176 * The initial part of this code resembles ath_ioctl_diag(); 177 * it's likely a good idea to reduce duplication between 178 * these two routines. 179 */ 180 int 181 ath_ioctl_spectral(struct ath_softc *sc, struct ath_diag *ad) 182 { 183 unsigned int id = ad->ad_id & ATH_DIAG_ID; 184 void *indata = NULL; 185 void *outdata = NULL; 186 u_int32_t insize = ad->ad_in_size; 187 u_int32_t outsize = ad->ad_out_size; 188 int error = 0; 189 HAL_SPECTRAL_PARAM peout; 190 HAL_SPECTRAL_PARAM *pe; 191 struct ath_spectral_state *ss = sc->sc_spectral; 192 int val; 193 194 if (! ath_hal_spectral_supported(sc->sc_ah)) 195 return (EINVAL); 196 197 ATH_LOCK(sc); 198 ath_power_set_power_state(sc, HAL_PM_AWAKE); 199 ATH_UNLOCK(sc); 200 201 if (ad->ad_id & ATH_DIAG_IN) { 202 /* 203 * Copy in data. 204 */ 205 indata = malloc(insize, M_TEMP, M_NOWAIT); 206 if (indata == NULL) { 207 error = ENOMEM; 208 goto bad; 209 } 210 error = copyin(ad->ad_in_data, indata, insize); 211 if (error) 212 goto bad; 213 } 214 if (ad->ad_id & ATH_DIAG_DYN) { 215 /* 216 * Allocate a buffer for the results (otherwise the HAL 217 * returns a pointer to a buffer where we can read the 218 * results). Note that we depend on the HAL leaving this 219 * pointer for us to use below in reclaiming the buffer; 220 * may want to be more defensive. 221 */ 222 outdata = malloc(outsize, M_TEMP, M_NOWAIT | M_ZERO); 223 if (outdata == NULL) { 224 error = ENOMEM; 225 goto bad; 226 } 227 } 228 switch (id) { 229 case SPECTRAL_CONTROL_GET_PARAMS: 230 memset(&peout, 0, sizeof(peout)); 231 outsize = sizeof(HAL_SPECTRAL_PARAM); 232 ath_hal_spectral_get_config(sc->sc_ah, &peout); 233 pe = (HAL_SPECTRAL_PARAM *) outdata; 234 memcpy(pe, &peout, sizeof(*pe)); 235 break; 236 case SPECTRAL_CONTROL_SET_PARAMS: 237 if (insize < sizeof(HAL_SPECTRAL_PARAM)) { 238 error = EINVAL; 239 break; 240 } 241 pe = (HAL_SPECTRAL_PARAM *) indata; 242 ath_hal_spectral_configure(sc->sc_ah, pe); 243 /* Save a local copy of the updated parameters */ 244 ath_hal_spectral_get_config(sc->sc_ah, 245 &ss->spectral_state); 246 break; 247 case SPECTRAL_CONTROL_START: 248 ath_hal_spectral_configure(sc->sc_ah, 249 &ss->spectral_state); 250 (void) ath_hal_spectral_start(sc->sc_ah); 251 sc->sc_dospectral = 1; 252 /* XXX need to update the PHY mask in the driver */ 253 break; 254 case SPECTRAL_CONTROL_STOP: 255 (void) ath_hal_spectral_stop(sc->sc_ah); 256 sc->sc_dospectral = 0; 257 /* XXX need to update the PHY mask in the driver */ 258 break; 259 case SPECTRAL_CONTROL_ENABLE_AT_RESET: 260 if (insize < sizeof(int)) { 261 device_printf(sc->sc_dev, "%d != %d\n", 262 insize, 263 (int) sizeof(int)); 264 error = EINVAL; 265 break; 266 } 267 if (indata == NULL) { 268 device_printf(sc->sc_dev, "indata=NULL\n"); 269 error = EINVAL; 270 break; 271 } 272 val = * ((int *) indata); 273 if (val == 0) 274 ss->spectral_enable_after_reset = 0; 275 else 276 ss->spectral_enable_after_reset = 1; 277 break; 278 case SPECTRAL_CONTROL_ENABLE: 279 /* XXX TODO */ 280 case SPECTRAL_CONTROL_DISABLE: 281 /* XXX TODO */ 282 break; 283 default: 284 error = EINVAL; 285 goto bad; 286 } 287 if (outsize < ad->ad_out_size) 288 ad->ad_out_size = outsize; 289 if (outdata && copyout(outdata, ad->ad_out_data, ad->ad_out_size)) 290 error = EFAULT; 291 bad: 292 if ((ad->ad_id & ATH_DIAG_IN) && indata != NULL) 293 free(indata, M_TEMP); 294 if ((ad->ad_id & ATH_DIAG_DYN) && outdata != NULL) 295 free(outdata, M_TEMP); 296 ATH_LOCK(sc); 297 ath_power_restore_power_state(sc); 298 ATH_UNLOCK(sc); 299 300 return (error); 301 } 302 303