xref: /freebsd/sys/dev/ath/if_ath_ioctl.c (revision d4eeb02986980bf33dd56c41ceb9fc5f180c0d47)
1 /*-
2  * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer,
10  *    without modification.
11  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
12  *    similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
13  *    redistribution must be conditioned upon including a substantially
14  *    similar Disclaimer requirement for further binary redistribution.
15  *
16  * NO WARRANTY
17  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
18  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
19  * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
20  * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
21  * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
22  * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
23  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
24  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
25  * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
26  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
27  * THE POSSIBILITY OF SUCH DAMAGES.
28  */
29 
30 #include <sys/cdefs.h>
31 __FBSDID("$FreeBSD$");
32 
33 /*
34  * Driver for the Atheros Wireless LAN controller.
35  *
36  * This software is derived from work of Atsushi Onoe; his contribution
37  * is greatly appreciated.
38  */
39 
40 #include "opt_inet.h"
41 #include "opt_ath.h"
42 /*
43  * This is needed for register operations which are performed
44  * by the driver - eg, calls to ath_hal_gettsf32().
45  *
46  * It's also required for any AH_DEBUG checks in here, eg the
47  * module dependencies.
48  */
49 #include "opt_ah.h"
50 #include "opt_wlan.h"
51 
52 #include <sys/param.h>
53 #include <sys/systm.h>
54 #include <sys/sysctl.h>
55 #include <sys/mbuf.h>
56 #include <sys/malloc.h>
57 #include <sys/lock.h>
58 #include <sys/mutex.h>
59 #include <sys/kernel.h>
60 #include <sys/socket.h>
61 #include <sys/sockio.h>
62 #include <sys/errno.h>
63 #include <sys/callout.h>
64 #include <sys/bus.h>
65 #include <sys/endian.h>
66 #include <sys/kthread.h>
67 #include <sys/taskqueue.h>
68 #include <sys/priv.h>
69 #include <sys/module.h>
70 #include <sys/ktr.h>
71 #include <sys/smp.h>	/* for mp_ncpus */
72 
73 #include <machine/bus.h>
74 
75 #include <net/if.h>
76 #include <net/if_var.h>
77 #include <net/if_dl.h>
78 #include <net/if_media.h>
79 #include <net/if_types.h>
80 #include <net/if_arp.h>
81 #include <net/ethernet.h>
82 #include <net/if_llc.h>
83 
84 #include <net80211/ieee80211_var.h>
85 #include <net80211/ieee80211_regdomain.h>
86 #ifdef IEEE80211_SUPPORT_SUPERG
87 #include <net80211/ieee80211_superg.h>
88 #endif
89 #ifdef IEEE80211_SUPPORT_TDMA
90 #include <net80211/ieee80211_tdma.h>
91 #endif
92 
93 #include <net/bpf.h>
94 
95 #ifdef INET
96 #include <netinet/in.h>
97 #include <netinet/if_ether.h>
98 #endif
99 
100 #include <dev/ath/if_athvar.h>
101 #include <dev/ath/ath_hal/ah_devid.h>		/* XXX for softled */
102 #include <dev/ath/ath_hal/ah_diagcodes.h>
103 
104 #include <dev/ath/if_ath_debug.h>
105 #include <dev/ath/if_ath_misc.h>
106 #include <dev/ath/if_ath_btcoex.h>
107 #include <dev/ath/if_ath_spectral.h>
108 #include <dev/ath/if_ath_lna_div.h>
109 #include <dev/ath/if_athdfs.h>
110 
111 #ifdef	IEEE80211_SUPPORT_TDMA
112 #include <dev/ath/if_ath_tdma.h>
113 #endif
114 
115 #include <dev/ath/if_ath_ioctl.h>
116 
117 /*
118  * ioctl() related pieces.
119  *
120  * Some subsystems (eg spectral, dfs) have their own ioctl method which
121  * we call.
122  */
123 
124 /*
125  * Fetch the rate control statistics for the given node.
126  */
127 static int
128 ath_ioctl_ratestats(struct ath_softc *sc, struct ath_rateioctl *rs)
129 {
130 	struct ath_node *an;
131 	struct ieee80211com *ic = &sc->sc_ic;
132 	struct ieee80211_node *ni;
133 	int error = 0;
134 
135 	/* Perform a lookup on the given node */
136 	ni = ieee80211_find_node(&ic->ic_sta, rs->is_u.macaddr);
137 	if (ni == NULL) {
138 		error = EINVAL;
139 		goto bad;
140 	}
141 
142 	/* Lock the ath_node */
143 	an = ATH_NODE(ni);
144 	ATH_NODE_LOCK(an);
145 
146 	/* Fetch the rate control stats for this node */
147 	error = ath_rate_fetch_node_stats(sc, an, rs);
148 
149 	/* No matter what happens here, just drop through */
150 
151 	/* Unlock the ath_node */
152 	ATH_NODE_UNLOCK(an);
153 
154 	/* Unref the node */
155 	ieee80211_node_decref(ni);
156 
157 bad:
158 	return (error);
159 }
160 
161 #ifdef ATH_DIAGAPI
162 /*
163  * Diagnostic interface to the HAL.  This is used by various
164  * tools to do things like retrieve register contents for
165  * debugging.  The mechanism is intentionally opaque so that
166  * it can change frequently w/o concern for compatibility.
167  */
168 static int
169 ath_ioctl_diag(struct ath_softc *sc, struct ath_diag *ad)
170 {
171 	struct ath_hal *ah = sc->sc_ah;
172 	u_int id = ad->ad_id & ATH_DIAG_ID;
173 	void *indata = NULL;
174 	void *outdata = NULL;
175 	u_int32_t insize = ad->ad_in_size;
176 	u_int32_t outsize = ad->ad_out_size;
177 	int error = 0;
178 
179 	if (ad->ad_id & ATH_DIAG_IN) {
180 		/*
181 		 * Copy in data.
182 		 */
183 		indata = malloc(insize, M_TEMP, M_NOWAIT);
184 		if (indata == NULL) {
185 			error = ENOMEM;
186 			goto bad;
187 		}
188 		error = copyin(ad->ad_in_data, indata, insize);
189 		if (error)
190 			goto bad;
191 	}
192 	if (ad->ad_id & ATH_DIAG_DYN) {
193 		/*
194 		 * Allocate a buffer for the results (otherwise the HAL
195 		 * returns a pointer to a buffer where we can read the
196 		 * results).  Note that we depend on the HAL leaving this
197 		 * pointer for us to use below in reclaiming the buffer;
198 		 * may want to be more defensive.
199 		 */
200 		outdata = malloc(outsize, M_TEMP, M_NOWAIT | M_ZERO);
201 		if (outdata == NULL) {
202 			error = ENOMEM;
203 			goto bad;
204 		}
205 	}
206 
207 	ATH_LOCK(sc);
208 	if (id != HAL_DIAG_REGS)
209 		ath_power_set_power_state(sc, HAL_PM_AWAKE);
210 	ATH_UNLOCK(sc);
211 
212 	if (ath_hal_getdiagstate(ah, id, indata, insize, &outdata, &outsize)) {
213 		if (outsize < ad->ad_out_size)
214 			ad->ad_out_size = outsize;
215 		if (outdata != NULL)
216 			error = copyout(outdata, ad->ad_out_data,
217 					ad->ad_out_size);
218 	} else {
219 		error = EINVAL;
220 	}
221 
222 	ATH_LOCK(sc);
223 	if (id != HAL_DIAG_REGS)
224 		ath_power_restore_power_state(sc);
225 	ATH_UNLOCK(sc);
226 
227 bad:
228 	if ((ad->ad_id & ATH_DIAG_IN) && indata != NULL)
229 		free(indata, M_TEMP);
230 	if ((ad->ad_id & ATH_DIAG_DYN) && outdata != NULL)
231 		free(outdata, M_TEMP);
232 	return error;
233 }
234 #endif /* ATH_DIAGAPI */
235 
236 int
237 ath_ioctl(struct ieee80211com *ic, u_long cmd, void *data)
238 {
239 	struct ifreq *ifr = data;
240 	struct ath_softc *sc = ic->ic_softc;
241 
242 	switch (cmd) {
243 	case SIOCGATHSTATS: {
244 		struct ieee80211vap *vap;
245 		struct ifnet *ifp;
246 		const HAL_RATE_TABLE *rt;
247 
248 		/* NB: embed these numbers to get a consistent view */
249 		sc->sc_stats.ast_tx_packets = 0;
250 		sc->sc_stats.ast_rx_packets = 0;
251 		TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) {
252 			ifp = vap->iv_ifp;
253 			sc->sc_stats.ast_tx_packets += ifp->if_get_counter(ifp,
254 			    IFCOUNTER_OPACKETS);
255 			sc->sc_stats.ast_rx_packets += ifp->if_get_counter(ifp,
256 			    IFCOUNTER_IPACKETS);
257 		}
258 		sc->sc_stats.ast_tx_rssi = ATH_RSSI(sc->sc_halstats.ns_avgtxrssi);
259 		sc->sc_stats.ast_rx_rssi = ATH_RSSI(sc->sc_halstats.ns_avgrssi);
260 #ifdef IEEE80211_SUPPORT_TDMA
261 		sc->sc_stats.ast_tdma_tsfadjp = TDMA_AVG(sc->sc_avgtsfdeltap);
262 		sc->sc_stats.ast_tdma_tsfadjm = TDMA_AVG(sc->sc_avgtsfdeltam);
263 #endif
264 		rt = sc->sc_currates;
265 		sc->sc_stats.ast_tx_rate =
266 		    rt->info[sc->sc_txrix].dot11Rate &~ IEEE80211_RATE_BASIC;
267 		if (rt->info[sc->sc_txrix].phy & IEEE80211_T_HT)
268 			sc->sc_stats.ast_tx_rate |= IEEE80211_RATE_MCS;
269 		return copyout(&sc->sc_stats, ifr_data_get_ptr(ifr),
270 		    sizeof (sc->sc_stats));
271 	}
272 	case SIOCGATHAGSTATS:
273 		return copyout(&sc->sc_aggr_stats, ifr_data_get_ptr(ifr),
274 		    sizeof (sc->sc_aggr_stats));
275 	case SIOCZATHSTATS: {
276 		int error;
277 
278 		error = priv_check(curthread, PRIV_DRIVER);
279 		if (error == 0) {
280 			memset(&sc->sc_stats, 0, sizeof(sc->sc_stats));
281 			memset(&sc->sc_aggr_stats, 0,
282 			    sizeof(sc->sc_aggr_stats));
283 			memset(&sc->sc_intr_stats, 0,
284 			    sizeof(sc->sc_intr_stats));
285 		}
286 		return (error);
287 	}
288 #ifdef ATH_DIAGAPI
289 	case SIOCGATHDIAG:
290 		return (ath_ioctl_diag(sc, data));
291 	case SIOCGATHPHYERR:
292 		return (ath_ioctl_phyerr(sc, data));
293 #endif
294 	case SIOCGATHSPECTRAL:
295 		return (ath_ioctl_spectral(sc, data));
296 	case SIOCGATHNODERATESTATS:
297 		return (ath_ioctl_ratestats(sc, data));
298 	case SIOCGATHBTCOEX:
299 		return (ath_btcoex_ioctl(sc, data));
300 	default:
301 		/*
302 		 * This signals the net80211 layer that we didn't handle this
303 		 * ioctl.
304 		 */
305 		return (ENOTTY);
306 	}
307 }
308