xref: /freebsd/sys/dev/ath/if_ath_ioctl.c (revision 3fc36ee018bb836bd1796067cf4ef8683f166ebc)
1 /*-
2  * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer,
10  *    without modification.
11  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
12  *    similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
13  *    redistribution must be conditioned upon including a substantially
14  *    similar Disclaimer requirement for further binary redistribution.
15  *
16  * NO WARRANTY
17  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
18  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
19  * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
20  * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
21  * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
22  * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
23  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
24  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
25  * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
26  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
27  * THE POSSIBILITY OF SUCH DAMAGES.
28  */
29 
30 #include <sys/cdefs.h>
31 __FBSDID("$FreeBSD$");
32 
33 /*
34  * Driver for the Atheros Wireless LAN controller.
35  *
36  * This software is derived from work of Atsushi Onoe; his contribution
37  * is greatly appreciated.
38  */
39 
40 #include "opt_inet.h"
41 #include "opt_ath.h"
42 /*
43  * This is needed for register operations which are performed
44  * by the driver - eg, calls to ath_hal_gettsf32().
45  *
46  * It's also required for any AH_DEBUG checks in here, eg the
47  * module dependencies.
48  */
49 #include "opt_ah.h"
50 #include "opt_wlan.h"
51 
52 #include <sys/param.h>
53 #include <sys/systm.h>
54 #include <sys/sysctl.h>
55 #include <sys/mbuf.h>
56 #include <sys/malloc.h>
57 #include <sys/lock.h>
58 #include <sys/mutex.h>
59 #include <sys/kernel.h>
60 #include <sys/socket.h>
61 #include <sys/sockio.h>
62 #include <sys/errno.h>
63 #include <sys/callout.h>
64 #include <sys/bus.h>
65 #include <sys/endian.h>
66 #include <sys/kthread.h>
67 #include <sys/taskqueue.h>
68 #include <sys/priv.h>
69 #include <sys/module.h>
70 #include <sys/ktr.h>
71 #include <sys/smp.h>	/* for mp_ncpus */
72 
73 #include <machine/bus.h>
74 
75 #include <net/if.h>
76 #include <net/if_var.h>
77 #include <net/if_dl.h>
78 #include <net/if_media.h>
79 #include <net/if_types.h>
80 #include <net/if_arp.h>
81 #include <net/ethernet.h>
82 #include <net/if_llc.h>
83 
84 #include <net80211/ieee80211_var.h>
85 #include <net80211/ieee80211_regdomain.h>
86 #ifdef IEEE80211_SUPPORT_SUPERG
87 #include <net80211/ieee80211_superg.h>
88 #endif
89 #ifdef IEEE80211_SUPPORT_TDMA
90 #include <net80211/ieee80211_tdma.h>
91 #endif
92 
93 #include <net/bpf.h>
94 
95 #ifdef INET
96 #include <netinet/in.h>
97 #include <netinet/if_ether.h>
98 #endif
99 
100 #include <dev/ath/if_athvar.h>
101 #include <dev/ath/ath_hal/ah_devid.h>		/* XXX for softled */
102 #include <dev/ath/ath_hal/ah_diagcodes.h>
103 
104 #include <dev/ath/if_ath_debug.h>
105 #include <dev/ath/if_ath_misc.h>
106 #include <dev/ath/if_ath_btcoex.h>
107 #include <dev/ath/if_ath_spectral.h>
108 #include <dev/ath/if_ath_lna_div.h>
109 #include <dev/ath/if_athdfs.h>
110 
111 #ifdef	IEEE80211_SUPPORT_TDMA
112 #include <dev/ath/if_ath_tdma.h>
113 #endif
114 
115 #include <dev/ath/if_ath_ioctl.h>
116 
117 /*
118  * ioctl() related pieces.
119  *
120  * Some subsystems (eg spectral, dfs) have their own ioctl method which
121  * we call.
122  */
123 
124 /*
125  * Fetch the rate control statistics for the given node.
126  */
127 static int
128 ath_ioctl_ratestats(struct ath_softc *sc, struct ath_rateioctl *rs)
129 {
130 	struct ath_node *an;
131 	struct ieee80211com *ic = &sc->sc_ic;
132 	struct ieee80211_node *ni;
133 	int error = 0;
134 
135 	/* Perform a lookup on the given node */
136 	ni = ieee80211_find_node(&ic->ic_sta, rs->is_u.macaddr);
137 	if (ni == NULL) {
138 		error = EINVAL;
139 		goto bad;
140 	}
141 
142 	/* Lock the ath_node */
143 	an = ATH_NODE(ni);
144 	ATH_NODE_LOCK(an);
145 
146 	/* Fetch the rate control stats for this node */
147 	error = ath_rate_fetch_node_stats(sc, an, rs);
148 
149 	/* No matter what happens here, just drop through */
150 
151 	/* Unlock the ath_node */
152 	ATH_NODE_UNLOCK(an);
153 
154 	/* Unref the node */
155 	ieee80211_node_decref(ni);
156 
157 bad:
158 	return (error);
159 }
160 
161 #ifdef ATH_DIAGAPI
162 /*
163  * Diagnostic interface to the HAL.  This is used by various
164  * tools to do things like retrieve register contents for
165  * debugging.  The mechanism is intentionally opaque so that
166  * it can change frequently w/o concern for compatibility.
167  */
168 static int
169 ath_ioctl_diag(struct ath_softc *sc, struct ath_diag *ad)
170 {
171 	struct ath_hal *ah = sc->sc_ah;
172 	u_int id = ad->ad_id & ATH_DIAG_ID;
173 	void *indata = NULL;
174 	void *outdata = NULL;
175 	u_int32_t insize = ad->ad_in_size;
176 	u_int32_t outsize = ad->ad_out_size;
177 	int error = 0;
178 
179 	if (ad->ad_id & ATH_DIAG_IN) {
180 		/*
181 		 * Copy in data.
182 		 */
183 		indata = malloc(insize, M_TEMP, M_NOWAIT);
184 		if (indata == NULL) {
185 			error = ENOMEM;
186 			goto bad;
187 		}
188 		error = copyin(ad->ad_in_data, indata, insize);
189 		if (error)
190 			goto bad;
191 	}
192 	if (ad->ad_id & ATH_DIAG_DYN) {
193 		/*
194 		 * Allocate a buffer for the results (otherwise the HAL
195 		 * returns a pointer to a buffer where we can read the
196 		 * results).  Note that we depend on the HAL leaving this
197 		 * pointer for us to use below in reclaiming the buffer;
198 		 * may want to be more defensive.
199 		 */
200 		outdata = malloc(outsize, M_TEMP, M_NOWAIT);
201 		if (outdata == NULL) {
202 			error = ENOMEM;
203 			goto bad;
204 		}
205 	}
206 
207 
208 	ATH_LOCK(sc);
209 	if (id != HAL_DIAG_REGS)
210 		ath_power_set_power_state(sc, HAL_PM_AWAKE);
211 	ATH_UNLOCK(sc);
212 
213 	if (ath_hal_getdiagstate(ah, id, indata, insize, &outdata, &outsize)) {
214 		if (outsize < ad->ad_out_size)
215 			ad->ad_out_size = outsize;
216 		if (outdata != NULL)
217 			error = copyout(outdata, ad->ad_out_data,
218 					ad->ad_out_size);
219 	} else {
220 		error = EINVAL;
221 	}
222 
223 	ATH_LOCK(sc);
224 	if (id != HAL_DIAG_REGS)
225 		ath_power_restore_power_state(sc);
226 	ATH_UNLOCK(sc);
227 
228 bad:
229 	if ((ad->ad_id & ATH_DIAG_IN) && indata != NULL)
230 		free(indata, M_TEMP);
231 	if ((ad->ad_id & ATH_DIAG_DYN) && outdata != NULL)
232 		free(outdata, M_TEMP);
233 	return error;
234 }
235 #endif /* ATH_DIAGAPI */
236 
237 int
238 ath_ioctl(struct ieee80211com *ic, u_long cmd, void *data)
239 {
240 	struct ifreq *ifr = data;
241 	struct ath_softc *sc = ic->ic_softc;
242 
243 	switch (cmd) {
244 	case SIOCGATHSTATS: {
245 		struct ieee80211vap *vap;
246 		struct ifnet *ifp;
247 		const HAL_RATE_TABLE *rt;
248 
249 		/* NB: embed these numbers to get a consistent view */
250 		sc->sc_stats.ast_tx_packets = 0;
251 		sc->sc_stats.ast_rx_packets = 0;
252 		TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) {
253 			ifp = vap->iv_ifp;
254 			sc->sc_stats.ast_tx_packets += ifp->if_get_counter(ifp,
255 			    IFCOUNTER_OPACKETS);
256 			sc->sc_stats.ast_rx_packets += ifp->if_get_counter(ifp,
257 			    IFCOUNTER_IPACKETS);
258 		}
259 		sc->sc_stats.ast_tx_rssi = ATH_RSSI(sc->sc_halstats.ns_avgtxrssi);
260 		sc->sc_stats.ast_rx_rssi = ATH_RSSI(sc->sc_halstats.ns_avgrssi);
261 #ifdef IEEE80211_SUPPORT_TDMA
262 		sc->sc_stats.ast_tdma_tsfadjp = TDMA_AVG(sc->sc_avgtsfdeltap);
263 		sc->sc_stats.ast_tdma_tsfadjm = TDMA_AVG(sc->sc_avgtsfdeltam);
264 #endif
265 		rt = sc->sc_currates;
266 		sc->sc_stats.ast_tx_rate =
267 		    rt->info[sc->sc_txrix].dot11Rate &~ IEEE80211_RATE_BASIC;
268 		if (rt->info[sc->sc_txrix].phy & IEEE80211_T_HT)
269 			sc->sc_stats.ast_tx_rate |= IEEE80211_RATE_MCS;
270 		return copyout(&sc->sc_stats,
271 		    ifr->ifr_data, sizeof (sc->sc_stats));
272 	}
273 	case SIOCGATHAGSTATS:
274 		return copyout(&sc->sc_aggr_stats,
275 		    ifr->ifr_data, sizeof (sc->sc_aggr_stats));
276 	case SIOCZATHSTATS: {
277 		int error;
278 
279 		error = priv_check(curthread, PRIV_DRIVER);
280 		if (error == 0) {
281 			memset(&sc->sc_stats, 0, sizeof(sc->sc_stats));
282 			memset(&sc->sc_aggr_stats, 0,
283 			    sizeof(sc->sc_aggr_stats));
284 			memset(&sc->sc_intr_stats, 0,
285 			    sizeof(sc->sc_intr_stats));
286 		}
287 		return (error);
288 	}
289 #ifdef ATH_DIAGAPI
290 	case SIOCGATHDIAG:
291 		return (ath_ioctl_diag(sc, data));
292 	case SIOCGATHPHYERR:
293 		return (ath_ioctl_phyerr(sc, data));
294 #endif
295 	case SIOCGATHSPECTRAL:
296 		return (ath_ioctl_spectral(sc, data));
297 	case SIOCGATHNODERATESTATS:
298 		return (ath_ioctl_ratestats(sc, data));
299 	default:
300 		/*
301 		 * This signals the net80211 layer that we didn't handle this
302 		 * ioctl.
303 		 */
304 		return (ENOTTY);
305 	}
306 }
307 
308