1 /*- 2 * SPDX-License-Identifier: BSD-3-Clause 3 * 4 * Copyright (c) 2005 John Bicket 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer, 12 * without modification. 13 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 14 * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any 15 * redistribution must be conditioned upon including a substantially 16 * similar Disclaimer requirement for further binary redistribution. 17 * 3. Neither the names of the above-listed copyright holders nor the names 18 * of any contributors may be used to endorse or promote products derived 19 * from this software without specific prior written permission. 20 * 21 * Alternatively, this software may be distributed under the terms of the 22 * GNU General Public License ("GPL") version 2 as published by the Free 23 * Software Foundation. 24 * 25 * NO WARRANTY 26 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 27 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 28 * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY 29 * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL 30 * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, 31 * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 32 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 33 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER 34 * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 35 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 36 * THE POSSIBILITY OF SUCH DAMAGES. 37 * 38 */ 39 40 #include <sys/cdefs.h> 41 __FBSDID("$FreeBSD$"); 42 43 /* 44 * John Bicket's SampleRate control algorithm. 45 */ 46 #include "opt_ath.h" 47 #include "opt_inet.h" 48 #include "opt_wlan.h" 49 #include "opt_ah.h" 50 51 #include <sys/param.h> 52 #include <sys/systm.h> 53 #include <sys/sysctl.h> 54 #include <sys/kernel.h> 55 #include <sys/lock.h> 56 #include <sys/malloc.h> 57 #include <sys/mutex.h> 58 #include <sys/errno.h> 59 60 #include <machine/bus.h> 61 #include <machine/resource.h> 62 #include <sys/bus.h> 63 64 #include <sys/socket.h> 65 66 #include <net/if.h> 67 #include <net/if_var.h> 68 #include <net/if_media.h> 69 #include <net/if_arp.h> 70 #include <net/ethernet.h> /* XXX for ether_sprintf */ 71 72 #include <net80211/ieee80211_var.h> 73 74 #include <net/bpf.h> 75 76 #ifdef INET 77 #include <netinet/in.h> 78 #include <netinet/if_ether.h> 79 #endif 80 81 #include <dev/ath/if_athvar.h> 82 #include <dev/ath/ath_rate/sample/sample.h> 83 #include <dev/ath/ath_hal/ah_desc.h> 84 #include <dev/ath/ath_rate/sample/tx_schedules.h> 85 86 /* 87 * This file is an implementation of the SampleRate algorithm 88 * in "Bit-rate Selection in Wireless Networks" 89 * (http://www.pdos.lcs.mit.edu/papers/jbicket-ms.ps) 90 * 91 * SampleRate chooses the bit-rate it predicts will provide the most 92 * throughput based on estimates of the expected per-packet 93 * transmission time for each bit-rate. SampleRate periodically sends 94 * packets at bit-rates other than the current one to estimate when 95 * another bit-rate will provide better performance. SampleRate 96 * switches to another bit-rate when its estimated per-packet 97 * transmission time becomes smaller than the current bit-rate's. 98 * SampleRate reduces the number of bit-rates it must sample by 99 * eliminating those that could not perform better than the one 100 * currently being used. SampleRate also stops probing at a bit-rate 101 * if it experiences several successive losses. 102 * 103 * The difference between the algorithm in the thesis and the one in this 104 * file is that the one in this file uses a ewma instead of a window. 105 * 106 * Also, this implementation tracks the average transmission time for 107 * a few different packet sizes independently for each link. 108 */ 109 110 static void ath_rate_ctl_reset(struct ath_softc *, struct ieee80211_node *); 111 112 static __inline int 113 size_to_bin(int size) 114 { 115 #if NUM_PACKET_SIZE_BINS > 1 116 if (size <= packet_size_bins[0]) 117 return 0; 118 #endif 119 #if NUM_PACKET_SIZE_BINS > 2 120 if (size <= packet_size_bins[1]) 121 return 1; 122 #endif 123 #if NUM_PACKET_SIZE_BINS > 3 124 if (size <= packet_size_bins[2]) 125 return 2; 126 #endif 127 #if NUM_PACKET_SIZE_BINS > 4 128 #error "add support for more packet sizes" 129 #endif 130 return NUM_PACKET_SIZE_BINS-1; 131 } 132 133 void 134 ath_rate_node_init(struct ath_softc *sc, struct ath_node *an) 135 { 136 /* NB: assumed to be zero'd by caller */ 137 } 138 139 void 140 ath_rate_node_cleanup(struct ath_softc *sc, struct ath_node *an) 141 { 142 } 143 144 static int 145 dot11rate(const HAL_RATE_TABLE *rt, int rix) 146 { 147 if (rix < 0) 148 return -1; 149 return rt->info[rix].phy == IEEE80211_T_HT ? 150 rt->info[rix].dot11Rate : (rt->info[rix].dot11Rate & IEEE80211_RATE_VAL) / 2; 151 } 152 153 static const char * 154 dot11rate_label(const HAL_RATE_TABLE *rt, int rix) 155 { 156 if (rix < 0) 157 return ""; 158 return rt->info[rix].phy == IEEE80211_T_HT ? "MCS" : "Mb "; 159 } 160 161 /* 162 * Return the rix with the lowest average_tx_time, 163 * or -1 if all the average_tx_times are 0. 164 */ 165 static __inline int 166 pick_best_rate(struct ath_node *an, const HAL_RATE_TABLE *rt, 167 int size_bin, int require_acked_before) 168 { 169 struct sample_node *sn = ATH_NODE_SAMPLE(an); 170 int best_rate_rix, best_rate_tt, best_rate_pct; 171 uint64_t mask; 172 int rix, tt, pct; 173 174 best_rate_rix = 0; 175 best_rate_tt = 0; 176 best_rate_pct = 0; 177 for (mask = sn->ratemask, rix = 0; mask != 0; mask >>= 1, rix++) { 178 if ((mask & 1) == 0) /* not a supported rate */ 179 continue; 180 181 /* Don't pick a non-HT rate for a HT node */ 182 if ((an->an_node.ni_flags & IEEE80211_NODE_HT) && 183 (rt->info[rix].phy != IEEE80211_T_HT)) { 184 continue; 185 } 186 187 tt = sn->stats[size_bin][rix].average_tx_time; 188 if (tt <= 0 || 189 (require_acked_before && 190 !sn->stats[size_bin][rix].packets_acked)) 191 continue; 192 193 /* Calculate percentage if possible */ 194 if (sn->stats[size_bin][rix].total_packets > 0) { 195 pct = sn->stats[size_bin][rix].ewma_pct; 196 } else { 197 /* XXX for now, assume 95% ok */ 198 pct = 95; 199 } 200 201 /* don't use a bit-rate that has been failing */ 202 if (sn->stats[size_bin][rix].successive_failures > 3) 203 continue; 204 205 /* 206 * For HT, Don't use a bit rate that is much more 207 * lossy than the best. 208 * 209 * XXX this isn't optimal; it's just designed to 210 * eliminate rates that are going to be obviously 211 * worse. 212 */ 213 if (an->an_node.ni_flags & IEEE80211_NODE_HT) { 214 if (best_rate_pct > (pct + 50)) 215 continue; 216 } 217 218 /* 219 * For non-MCS rates, use the current average txtime for 220 * comparison. 221 */ 222 if (! (an->an_node.ni_flags & IEEE80211_NODE_HT)) { 223 if (best_rate_tt == 0 || tt <= best_rate_tt) { 224 best_rate_tt = tt; 225 best_rate_rix = rix; 226 best_rate_pct = pct; 227 } 228 } 229 230 /* 231 * Since 2 stream rates have slightly higher TX times, 232 * allow a little bit of leeway. This should later 233 * be abstracted out and properly handled. 234 */ 235 if (an->an_node.ni_flags & IEEE80211_NODE_HT) { 236 if (best_rate_tt == 0 || (tt * 8 <= best_rate_tt * 10)) { 237 best_rate_tt = tt; 238 best_rate_rix = rix; 239 best_rate_pct = pct; 240 } 241 } 242 } 243 return (best_rate_tt ? best_rate_rix : -1); 244 } 245 246 /* 247 * Pick a good "random" bit-rate to sample other than the current one. 248 */ 249 static __inline int 250 pick_sample_rate(struct sample_softc *ssc , struct ath_node *an, 251 const HAL_RATE_TABLE *rt, int size_bin) 252 { 253 #define DOT11RATE(ix) (rt->info[ix].dot11Rate & IEEE80211_RATE_VAL) 254 #define MCS(ix) (rt->info[ix].dot11Rate | IEEE80211_RATE_MCS) 255 struct sample_node *sn = ATH_NODE_SAMPLE(an); 256 int current_rix, rix; 257 unsigned current_tt; 258 uint64_t mask; 259 260 current_rix = sn->current_rix[size_bin]; 261 if (current_rix < 0) { 262 /* no successes yet, send at the lowest bit-rate */ 263 /* XXX should return MCS0 if HT */ 264 return 0; 265 } 266 267 current_tt = sn->stats[size_bin][current_rix].average_tx_time; 268 269 rix = sn->last_sample_rix[size_bin]+1; /* next sample rate */ 270 mask = sn->ratemask &~ ((uint64_t) 1<<current_rix);/* don't sample current rate */ 271 while (mask != 0) { 272 if ((mask & ((uint64_t) 1<<rix)) == 0) { /* not a supported rate */ 273 nextrate: 274 if (++rix >= rt->rateCount) 275 rix = 0; 276 continue; 277 } 278 279 /* 280 * The following code stops trying to sample 281 * non-MCS rates when speaking to an MCS node. 282 * However, at least for CCK rates in 2.4GHz mode, 283 * the non-MCS rates MAY actually provide better 284 * PER at the very far edge of reception. 285 * 286 * However! Until ath_rate_form_aggr() grows 287 * some logic to not form aggregates if the 288 * selected rate is non-MCS, this won't work. 289 * 290 * So don't disable this code until you've taught 291 * ath_rate_form_aggr() to drop out if any of 292 * the selected rates are non-MCS. 293 */ 294 #if 1 295 /* if the node is HT and the rate isn't HT, don't bother sample */ 296 if ((an->an_node.ni_flags & IEEE80211_NODE_HT) && 297 (rt->info[rix].phy != IEEE80211_T_HT)) { 298 mask &= ~((uint64_t) 1<<rix); 299 goto nextrate; 300 } 301 #endif 302 303 /* this bit-rate is always worse than the current one */ 304 if (sn->stats[size_bin][rix].perfect_tx_time > current_tt) { 305 mask &= ~((uint64_t) 1<<rix); 306 goto nextrate; 307 } 308 309 /* rarely sample bit-rates that fail a lot */ 310 if (sn->stats[size_bin][rix].successive_failures > ssc->max_successive_failures && 311 ticks - sn->stats[size_bin][rix].last_tx < ssc->stale_failure_timeout) { 312 mask &= ~((uint64_t) 1<<rix); 313 goto nextrate; 314 } 315 316 /* 317 * For HT, only sample a few rates on either side of the 318 * current rix; there's quite likely a lot of them. 319 */ 320 if (an->an_node.ni_flags & IEEE80211_NODE_HT) { 321 if (rix < (current_rix - 3) || 322 rix > (current_rix + 3)) { 323 mask &= ~((uint64_t) 1<<rix); 324 goto nextrate; 325 } 326 } 327 328 /* Don't sample more than 2 rates higher for rates > 11M for non-HT rates */ 329 if (! (an->an_node.ni_flags & IEEE80211_NODE_HT)) { 330 if (DOT11RATE(rix) > 2*11 && rix > current_rix + 2) { 331 mask &= ~((uint64_t) 1<<rix); 332 goto nextrate; 333 } 334 } 335 336 sn->last_sample_rix[size_bin] = rix; 337 return rix; 338 } 339 return current_rix; 340 #undef DOT11RATE 341 #undef MCS 342 } 343 344 static int 345 ath_rate_get_static_rix(struct ath_softc *sc, const struct ieee80211_node *ni) 346 { 347 #define RATE(_ix) (ni->ni_rates.rs_rates[(_ix)] & IEEE80211_RATE_VAL) 348 #define DOT11RATE(_ix) (rt->info[(_ix)].dot11Rate & IEEE80211_RATE_VAL) 349 #define MCS(_ix) (ni->ni_htrates.rs_rates[_ix] | IEEE80211_RATE_MCS) 350 const struct ieee80211_txparam *tp = ni->ni_txparms; 351 int srate; 352 353 /* Check MCS rates */ 354 for (srate = ni->ni_htrates.rs_nrates - 1; srate >= 0; srate--) { 355 if (MCS(srate) == tp->ucastrate) 356 return sc->sc_rixmap[tp->ucastrate]; 357 } 358 359 /* Check legacy rates */ 360 for (srate = ni->ni_rates.rs_nrates - 1; srate >= 0; srate--) { 361 if (RATE(srate) == tp->ucastrate) 362 return sc->sc_rixmap[tp->ucastrate]; 363 } 364 return -1; 365 #undef RATE 366 #undef DOT11RATE 367 #undef MCS 368 } 369 370 static void 371 ath_rate_update_static_rix(struct ath_softc *sc, struct ieee80211_node *ni) 372 { 373 struct ath_node *an = ATH_NODE(ni); 374 const struct ieee80211_txparam *tp = ni->ni_txparms; 375 struct sample_node *sn = ATH_NODE_SAMPLE(an); 376 377 if (tp != NULL && tp->ucastrate != IEEE80211_FIXED_RATE_NONE) { 378 /* 379 * A fixed rate is to be used; ucastrate is the IEEE code 380 * for this rate (sans basic bit). Check this against the 381 * negotiated rate set for the node. Note the fixed rate 382 * may not be available for various reasons so we only 383 * setup the static rate index if the lookup is successful. 384 */ 385 sn->static_rix = ath_rate_get_static_rix(sc, ni); 386 } else { 387 sn->static_rix = -1; 388 } 389 } 390 391 /* 392 * Pick a non-HT rate to begin using. 393 */ 394 static int 395 ath_rate_pick_seed_rate_legacy(struct ath_softc *sc, struct ath_node *an, 396 int frameLen) 397 { 398 #define DOT11RATE(ix) (rt->info[ix].dot11Rate & IEEE80211_RATE_VAL) 399 #define MCS(ix) (rt->info[ix].dot11Rate | IEEE80211_RATE_MCS) 400 #define RATE(ix) (DOT11RATE(ix) / 2) 401 int rix = -1; 402 const HAL_RATE_TABLE *rt = sc->sc_currates; 403 struct sample_node *sn = ATH_NODE_SAMPLE(an); 404 const int size_bin = size_to_bin(frameLen); 405 406 /* no packet has been sent successfully yet */ 407 for (rix = rt->rateCount-1; rix > 0; rix--) { 408 if ((sn->ratemask & ((uint64_t) 1<<rix)) == 0) 409 continue; 410 411 /* Skip HT rates */ 412 if (rt->info[rix].phy == IEEE80211_T_HT) 413 continue; 414 415 /* 416 * Pick the highest rate <= 36 Mbps 417 * that hasn't failed. 418 */ 419 if (DOT11RATE(rix) <= 72 && 420 sn->stats[size_bin][rix].successive_failures == 0) { 421 break; 422 } 423 } 424 return rix; 425 #undef RATE 426 #undef MCS 427 #undef DOT11RATE 428 } 429 430 /* 431 * Pick a HT rate to begin using. 432 * 433 * Don't use any non-HT rates; only consider HT rates. 434 */ 435 static int 436 ath_rate_pick_seed_rate_ht(struct ath_softc *sc, struct ath_node *an, 437 int frameLen) 438 { 439 #define DOT11RATE(ix) (rt->info[ix].dot11Rate & IEEE80211_RATE_VAL) 440 #define MCS(ix) (rt->info[ix].dot11Rate | IEEE80211_RATE_MCS) 441 #define RATE(ix) (DOT11RATE(ix) / 2) 442 int rix = -1, ht_rix = -1; 443 const HAL_RATE_TABLE *rt = sc->sc_currates; 444 struct sample_node *sn = ATH_NODE_SAMPLE(an); 445 const int size_bin = size_to_bin(frameLen); 446 447 /* no packet has been sent successfully yet */ 448 for (rix = rt->rateCount-1; rix > 0; rix--) { 449 /* Skip rates we can't use */ 450 if ((sn->ratemask & ((uint64_t) 1<<rix)) == 0) 451 continue; 452 453 /* Keep a copy of the last seen HT rate index */ 454 if (rt->info[rix].phy == IEEE80211_T_HT) 455 ht_rix = rix; 456 457 /* Skip non-HT rates */ 458 if (rt->info[rix].phy != IEEE80211_T_HT) 459 continue; 460 461 /* 462 * Pick a medium-speed rate regardless of stream count 463 * which has not seen any failures. Higher rates may fail; 464 * we'll try them later. 465 */ 466 if (((MCS(rix) & 0x7) <= 4) && 467 sn->stats[size_bin][rix].successive_failures == 0) { 468 break; 469 } 470 } 471 472 /* 473 * If all the MCS rates have successive failures, rix should be 474 * > 0; otherwise use the lowest MCS rix (hopefully MCS 0.) 475 */ 476 return MAX(rix, ht_rix); 477 #undef RATE 478 #undef MCS 479 #undef DOT11RATE 480 } 481 482 483 void 484 ath_rate_findrate(struct ath_softc *sc, struct ath_node *an, 485 int shortPreamble, size_t frameLen, 486 u_int8_t *rix0, int *try0, u_int8_t *txrate) 487 { 488 #define DOT11RATE(ix) (rt->info[ix].dot11Rate & IEEE80211_RATE_VAL) 489 #define MCS(ix) (rt->info[ix].dot11Rate | IEEE80211_RATE_MCS) 490 #define RATE(ix) (DOT11RATE(ix) / 2) 491 struct sample_node *sn = ATH_NODE_SAMPLE(an); 492 struct sample_softc *ssc = ATH_SOFTC_SAMPLE(sc); 493 struct ieee80211com *ic = &sc->sc_ic; 494 const HAL_RATE_TABLE *rt = sc->sc_currates; 495 const int size_bin = size_to_bin(frameLen); 496 int rix, mrr, best_rix, change_rates; 497 unsigned average_tx_time; 498 499 ath_rate_update_static_rix(sc, &an->an_node); 500 501 if (sn->currates != sc->sc_currates) { 502 device_printf(sc->sc_dev, "%s: currates != sc_currates!\n", 503 __func__); 504 rix = 0; 505 *try0 = ATH_TXMAXTRY; 506 goto done; 507 } 508 509 if (sn->static_rix != -1) { 510 rix = sn->static_rix; 511 *try0 = ATH_TXMAXTRY; 512 goto done; 513 } 514 515 mrr = sc->sc_mrretry; 516 /* XXX check HT protmode too */ 517 if (mrr && (ic->ic_flags & IEEE80211_F_USEPROT && !sc->sc_mrrprot)) 518 mrr = 0; 519 520 best_rix = pick_best_rate(an, rt, size_bin, !mrr); 521 if (best_rix >= 0) { 522 average_tx_time = sn->stats[size_bin][best_rix].average_tx_time; 523 } else { 524 average_tx_time = 0; 525 } 526 /* 527 * Limit the time measuring the performance of other tx 528 * rates to sample_rate% of the total transmission time. 529 */ 530 if (sn->sample_tt[size_bin] < average_tx_time * (sn->packets_since_sample[size_bin]*ssc->sample_rate/100)) { 531 rix = pick_sample_rate(ssc, an, rt, size_bin); 532 IEEE80211_NOTE(an->an_node.ni_vap, IEEE80211_MSG_RATECTL, 533 &an->an_node, "att %d sample_tt %d size %u sample rate %d %s current rate %d %s", 534 average_tx_time, 535 sn->sample_tt[size_bin], 536 bin_to_size(size_bin), 537 dot11rate(rt, rix), 538 dot11rate_label(rt, rix), 539 dot11rate(rt, sn->current_rix[size_bin]), 540 dot11rate_label(rt, sn->current_rix[size_bin])); 541 if (rix != sn->current_rix[size_bin]) { 542 sn->current_sample_rix[size_bin] = rix; 543 } else { 544 sn->current_sample_rix[size_bin] = -1; 545 } 546 sn->packets_since_sample[size_bin] = 0; 547 } else { 548 change_rates = 0; 549 if (!sn->packets_sent[size_bin] || best_rix == -1) { 550 /* no packet has been sent successfully yet */ 551 change_rates = 1; 552 if (an->an_node.ni_flags & IEEE80211_NODE_HT) 553 best_rix = 554 ath_rate_pick_seed_rate_ht(sc, an, frameLen); 555 else 556 best_rix = 557 ath_rate_pick_seed_rate_legacy(sc, an, frameLen); 558 } else if (sn->packets_sent[size_bin] < 20) { 559 /* let the bit-rate switch quickly during the first few packets */ 560 IEEE80211_NOTE(an->an_node.ni_vap, 561 IEEE80211_MSG_RATECTL, &an->an_node, 562 "%s: switching quickly..", __func__); 563 change_rates = 1; 564 } else if (ticks - ssc->min_switch > sn->ticks_since_switch[size_bin]) { 565 /* min_switch seconds have gone by */ 566 IEEE80211_NOTE(an->an_node.ni_vap, 567 IEEE80211_MSG_RATECTL, &an->an_node, 568 "%s: min_switch %d > ticks_since_switch %d..", 569 __func__, ticks - ssc->min_switch, sn->ticks_since_switch[size_bin]); 570 change_rates = 1; 571 } else if ((! (an->an_node.ni_flags & IEEE80211_NODE_HT)) && 572 (2*average_tx_time < sn->stats[size_bin][sn->current_rix[size_bin]].average_tx_time)) { 573 /* the current bit-rate is twice as slow as the best one */ 574 IEEE80211_NOTE(an->an_node.ni_vap, 575 IEEE80211_MSG_RATECTL, &an->an_node, 576 "%s: 2x att (= %d) < cur_rix att %d", 577 __func__, 578 2 * average_tx_time, sn->stats[size_bin][sn->current_rix[size_bin]].average_tx_time); 579 change_rates = 1; 580 } else if ((an->an_node.ni_flags & IEEE80211_NODE_HT)) { 581 int cur_rix = sn->current_rix[size_bin]; 582 int cur_att = sn->stats[size_bin][cur_rix].average_tx_time; 583 /* 584 * If the node is HT, upgrade it if the MCS rate is 585 * higher and the average tx time is within 20% of 586 * the current rate. It can fail a little. 587 * 588 * This is likely not optimal! 589 */ 590 #if 0 591 printf("cur rix/att %x/%d, best rix/att %x/%d\n", 592 MCS(cur_rix), cur_att, MCS(best_rix), average_tx_time); 593 #endif 594 if ((MCS(best_rix) > MCS(cur_rix)) && 595 (average_tx_time * 8) <= (cur_att * 10)) { 596 IEEE80211_NOTE(an->an_node.ni_vap, 597 IEEE80211_MSG_RATECTL, &an->an_node, 598 "%s: HT: best_rix 0x%d > cur_rix 0x%x, average_tx_time %d, cur_att %d", 599 __func__, 600 MCS(best_rix), MCS(cur_rix), average_tx_time, cur_att); 601 change_rates = 1; 602 } 603 } 604 605 sn->packets_since_sample[size_bin]++; 606 607 if (change_rates) { 608 if (best_rix != sn->current_rix[size_bin]) { 609 IEEE80211_NOTE(an->an_node.ni_vap, 610 IEEE80211_MSG_RATECTL, 611 &an->an_node, 612 "%s: size %d switch rate %d (%d/%d) -> %d (%d/%d) after %d packets mrr %d", 613 __func__, 614 bin_to_size(size_bin), 615 RATE(sn->current_rix[size_bin]), 616 sn->stats[size_bin][sn->current_rix[size_bin]].average_tx_time, 617 sn->stats[size_bin][sn->current_rix[size_bin]].perfect_tx_time, 618 RATE(best_rix), 619 sn->stats[size_bin][best_rix].average_tx_time, 620 sn->stats[size_bin][best_rix].perfect_tx_time, 621 sn->packets_since_switch[size_bin], 622 mrr); 623 } 624 sn->packets_since_switch[size_bin] = 0; 625 sn->current_rix[size_bin] = best_rix; 626 sn->ticks_since_switch[size_bin] = ticks; 627 /* 628 * Set the visible txrate for this node. 629 */ 630 an->an_node.ni_txrate = (rt->info[best_rix].phy == IEEE80211_T_HT) ? MCS(best_rix) : DOT11RATE(best_rix); 631 } 632 rix = sn->current_rix[size_bin]; 633 sn->packets_since_switch[size_bin]++; 634 } 635 *try0 = mrr ? sn->sched[rix].t0 : ATH_TXMAXTRY; 636 done: 637 638 /* 639 * This bug totally sucks and should be fixed. 640 * 641 * For now though, let's not panic, so we can start to figure 642 * out how to better reproduce it. 643 */ 644 if (rix < 0 || rix >= rt->rateCount) { 645 printf("%s: ERROR: rix %d out of bounds (rateCount=%d)\n", 646 __func__, 647 rix, 648 rt->rateCount); 649 rix = 0; /* XXX just default for now */ 650 } 651 KASSERT(rix >= 0 && rix < rt->rateCount, ("rix is %d", rix)); 652 653 *rix0 = rix; 654 *txrate = rt->info[rix].rateCode 655 | (shortPreamble ? rt->info[rix].shortPreamble : 0); 656 sn->packets_sent[size_bin]++; 657 #undef DOT11RATE 658 #undef MCS 659 #undef RATE 660 } 661 662 /* 663 * Get the TX rates. Don't fiddle with short preamble flags for them; 664 * the caller can do that. 665 */ 666 void 667 ath_rate_getxtxrates(struct ath_softc *sc, struct ath_node *an, 668 uint8_t rix0, struct ath_rc_series *rc) 669 { 670 struct sample_node *sn = ATH_NODE_SAMPLE(an); 671 const struct txschedule *sched = &sn->sched[rix0]; 672 673 KASSERT(rix0 == sched->r0, ("rix0 (%x) != sched->r0 (%x)!\n", 674 rix0, sched->r0)); 675 676 rc[0].flags = rc[1].flags = rc[2].flags = rc[3].flags = 0; 677 678 rc[0].rix = sched->r0; 679 rc[1].rix = sched->r1; 680 rc[2].rix = sched->r2; 681 rc[3].rix = sched->r3; 682 683 rc[0].tries = sched->t0; 684 rc[1].tries = sched->t1; 685 rc[2].tries = sched->t2; 686 rc[3].tries = sched->t3; 687 } 688 689 void 690 ath_rate_setupxtxdesc(struct ath_softc *sc, struct ath_node *an, 691 struct ath_desc *ds, int shortPreamble, u_int8_t rix) 692 { 693 struct sample_node *sn = ATH_NODE_SAMPLE(an); 694 const struct txschedule *sched = &sn->sched[rix]; 695 const HAL_RATE_TABLE *rt = sc->sc_currates; 696 uint8_t rix1, s1code, rix2, s2code, rix3, s3code; 697 698 /* XXX precalculate short preamble tables */ 699 rix1 = sched->r1; 700 s1code = rt->info[rix1].rateCode 701 | (shortPreamble ? rt->info[rix1].shortPreamble : 0); 702 rix2 = sched->r2; 703 s2code = rt->info[rix2].rateCode 704 | (shortPreamble ? rt->info[rix2].shortPreamble : 0); 705 rix3 = sched->r3; 706 s3code = rt->info[rix3].rateCode 707 | (shortPreamble ? rt->info[rix3].shortPreamble : 0); 708 ath_hal_setupxtxdesc(sc->sc_ah, ds, 709 s1code, sched->t1, /* series 1 */ 710 s2code, sched->t2, /* series 2 */ 711 s3code, sched->t3); /* series 3 */ 712 } 713 714 static void 715 update_stats(struct ath_softc *sc, struct ath_node *an, 716 int frame_size, 717 int rix0, int tries0, 718 int rix1, int tries1, 719 int rix2, int tries2, 720 int rix3, int tries3, 721 int short_tries, int tries, int status, 722 int nframes, int nbad) 723 { 724 struct sample_node *sn = ATH_NODE_SAMPLE(an); 725 struct sample_softc *ssc = ATH_SOFTC_SAMPLE(sc); 726 #ifdef IEEE80211_DEBUG 727 const HAL_RATE_TABLE *rt = sc->sc_currates; 728 #endif 729 const int size_bin = size_to_bin(frame_size); 730 const int size = bin_to_size(size_bin); 731 int tt, tries_so_far; 732 int is_ht40 = (an->an_node.ni_chw == 40); 733 int pct; 734 735 if (!IS_RATE_DEFINED(sn, rix0)) 736 return; 737 tt = calc_usecs_unicast_packet(sc, size, rix0, short_tries, 738 MIN(tries0, tries) - 1, is_ht40); 739 tries_so_far = tries0; 740 741 if (tries1 && tries_so_far < tries) { 742 if (!IS_RATE_DEFINED(sn, rix1)) 743 return; 744 tt += calc_usecs_unicast_packet(sc, size, rix1, short_tries, 745 MIN(tries1 + tries_so_far, tries) - tries_so_far - 1, is_ht40); 746 tries_so_far += tries1; 747 } 748 749 if (tries2 && tries_so_far < tries) { 750 if (!IS_RATE_DEFINED(sn, rix2)) 751 return; 752 tt += calc_usecs_unicast_packet(sc, size, rix2, short_tries, 753 MIN(tries2 + tries_so_far, tries) - tries_so_far - 1, is_ht40); 754 tries_so_far += tries2; 755 } 756 757 if (tries3 && tries_so_far < tries) { 758 if (!IS_RATE_DEFINED(sn, rix3)) 759 return; 760 tt += calc_usecs_unicast_packet(sc, size, rix3, short_tries, 761 MIN(tries3 + tries_so_far, tries) - tries_so_far - 1, is_ht40); 762 } 763 764 if (sn->stats[size_bin][rix0].total_packets < ssc->smoothing_minpackets) { 765 /* just average the first few packets */ 766 int avg_tx = sn->stats[size_bin][rix0].average_tx_time; 767 int packets = sn->stats[size_bin][rix0].total_packets; 768 sn->stats[size_bin][rix0].average_tx_time = (tt+(avg_tx*packets))/(packets+nframes); 769 } else { 770 /* use a ewma */ 771 sn->stats[size_bin][rix0].average_tx_time = 772 ((sn->stats[size_bin][rix0].average_tx_time * ssc->smoothing_rate) + 773 (tt * (100 - ssc->smoothing_rate))) / 100; 774 } 775 776 /* 777 * XXX Don't mark the higher bit rates as also having failed; as this 778 * unfortunately stops those rates from being tasted when trying to 779 * TX. This happens with 11n aggregation. 780 * 781 * This is valid for higher CCK rates, higher OFDM rates, and higher 782 * HT rates within the current number of streams (eg MCS0..7, 8..15, 783 * etc.) 784 */ 785 if (nframes == nbad) { 786 #if 0 787 int y; 788 #endif 789 sn->stats[size_bin][rix0].successive_failures += nbad; 790 #if 0 791 for (y = size_bin+1; y < NUM_PACKET_SIZE_BINS; y++) { 792 /* 793 * Also say larger packets failed since we 794 * assume if a small packet fails at a 795 * bit-rate then a larger one will also. 796 */ 797 sn->stats[y][rix0].successive_failures += nbad; 798 sn->stats[y][rix0].last_tx = ticks; 799 sn->stats[y][rix0].tries += tries; 800 sn->stats[y][rix0].total_packets += nframes; 801 } 802 #endif 803 } else { 804 sn->stats[size_bin][rix0].packets_acked += (nframes - nbad); 805 sn->stats[size_bin][rix0].successive_failures = 0; 806 } 807 sn->stats[size_bin][rix0].tries += tries; 808 sn->stats[size_bin][rix0].last_tx = ticks; 809 sn->stats[size_bin][rix0].total_packets += nframes; 810 811 /* update EWMA for this rix */ 812 813 /* Calculate percentage based on current rate */ 814 if (nframes == 0) 815 nframes = nbad = 1; 816 pct = ((nframes - nbad) * 1000) / nframes; 817 818 if (sn->stats[size_bin][rix0].total_packets < 819 ssc->smoothing_minpackets) { 820 /* just average the first few packets */ 821 int a_pct = (sn->stats[size_bin][rix0].packets_acked * 1000) / 822 (sn->stats[size_bin][rix0].total_packets); 823 sn->stats[size_bin][rix0].ewma_pct = a_pct; 824 } else { 825 /* use a ewma */ 826 sn->stats[size_bin][rix0].ewma_pct = 827 ((sn->stats[size_bin][rix0].ewma_pct * ssc->smoothing_rate) + 828 (pct * (100 - ssc->smoothing_rate))) / 100; 829 } 830 831 832 if (rix0 == sn->current_sample_rix[size_bin]) { 833 IEEE80211_NOTE(an->an_node.ni_vap, IEEE80211_MSG_RATECTL, 834 &an->an_node, 835 "%s: size %d %s sample rate %d %s tries (%d/%d) tt %d avg_tt (%d/%d) nfrm %d nbad %d", 836 __func__, 837 size, 838 status ? "FAIL" : "OK", 839 dot11rate(rt, rix0), 840 dot11rate_label(rt, rix0), 841 short_tries, tries, tt, 842 sn->stats[size_bin][rix0].average_tx_time, 843 sn->stats[size_bin][rix0].perfect_tx_time, 844 nframes, nbad); 845 sn->sample_tt[size_bin] = tt; 846 sn->current_sample_rix[size_bin] = -1; 847 } 848 } 849 850 static void 851 badrate(struct ath_softc *sc, int series, int hwrate, int tries, int status) 852 { 853 854 device_printf(sc->sc_dev, 855 "bad series%d hwrate 0x%x, tries %u ts_status 0x%x\n", 856 series, hwrate, tries, status); 857 } 858 859 void 860 ath_rate_tx_complete(struct ath_softc *sc, struct ath_node *an, 861 const struct ath_rc_series *rc, const struct ath_tx_status *ts, 862 int frame_size, int nframes, int nbad) 863 { 864 struct ieee80211com *ic = &sc->sc_ic; 865 struct sample_node *sn = ATH_NODE_SAMPLE(an); 866 int final_rix, short_tries, long_tries; 867 const HAL_RATE_TABLE *rt = sc->sc_currates; 868 int status = ts->ts_status; 869 int mrr; 870 871 final_rix = rt->rateCodeToIndex[ts->ts_rate]; 872 short_tries = ts->ts_shortretry; 873 long_tries = ts->ts_longretry + 1; 874 875 if (nframes == 0) { 876 device_printf(sc->sc_dev, "%s: nframes=0?\n", __func__); 877 return; 878 } 879 880 if (frame_size == 0) /* NB: should not happen */ 881 frame_size = 1500; 882 883 if (sn->ratemask == 0) { 884 IEEE80211_NOTE(an->an_node.ni_vap, IEEE80211_MSG_RATECTL, 885 &an->an_node, 886 "%s: size %d %s rate/try %d/%d no rates yet", 887 __func__, 888 bin_to_size(size_to_bin(frame_size)), 889 status ? "FAIL" : "OK", 890 short_tries, long_tries); 891 return; 892 } 893 mrr = sc->sc_mrretry; 894 /* XXX check HT protmode too */ 895 if (mrr && (ic->ic_flags & IEEE80211_F_USEPROT && !sc->sc_mrrprot)) 896 mrr = 0; 897 898 if (!mrr || ts->ts_finaltsi == 0) { 899 if (!IS_RATE_DEFINED(sn, final_rix)) { 900 device_printf(sc->sc_dev, 901 "%s: ts_rate=%d ts_finaltsi=%d, final_rix=%d\n", 902 __func__, ts->ts_rate, ts->ts_finaltsi, final_rix); 903 badrate(sc, 0, ts->ts_rate, long_tries, status); 904 return; 905 } 906 /* 907 * Only one rate was used; optimize work. 908 */ 909 IEEE80211_NOTE(an->an_node.ni_vap, IEEE80211_MSG_RATECTL, 910 &an->an_node, "%s: size %d (%d bytes) %s rate/short/long %d %s/%d/%d nframes/nbad [%d/%d]", 911 __func__, 912 bin_to_size(size_to_bin(frame_size)), 913 frame_size, 914 status ? "FAIL" : "OK", 915 dot11rate(rt, final_rix), dot11rate_label(rt, final_rix), 916 short_tries, long_tries, nframes, nbad); 917 update_stats(sc, an, frame_size, 918 final_rix, long_tries, 919 0, 0, 920 0, 0, 921 0, 0, 922 short_tries, long_tries, status, 923 nframes, nbad); 924 925 } else { 926 int finalTSIdx = ts->ts_finaltsi; 927 int i; 928 929 /* 930 * Process intermediate rates that failed. 931 */ 932 933 IEEE80211_NOTE(an->an_node.ni_vap, IEEE80211_MSG_RATECTL, 934 &an->an_node, 935 "%s: size %d (%d bytes) finaltsidx %d short %d long %d %s rate/try [%d %s/%d %d %s/%d %d %s/%d %d %s/%d] nframes/nbad [%d/%d]", 936 __func__, 937 bin_to_size(size_to_bin(frame_size)), 938 frame_size, 939 finalTSIdx, 940 short_tries, 941 long_tries, 942 status ? "FAIL" : "OK", 943 dot11rate(rt, rc[0].rix), 944 dot11rate_label(rt, rc[0].rix), rc[0].tries, 945 dot11rate(rt, rc[1].rix), 946 dot11rate_label(rt, rc[1].rix), rc[1].tries, 947 dot11rate(rt, rc[2].rix), 948 dot11rate_label(rt, rc[2].rix), rc[2].tries, 949 dot11rate(rt, rc[3].rix), 950 dot11rate_label(rt, rc[3].rix), rc[3].tries, 951 nframes, nbad); 952 953 for (i = 0; i < 4; i++) { 954 if (rc[i].tries && !IS_RATE_DEFINED(sn, rc[i].rix)) 955 badrate(sc, 0, rc[i].ratecode, rc[i].tries, 956 status); 957 } 958 959 /* 960 * NB: series > 0 are not penalized for failure 961 * based on the try counts under the assumption 962 * that losses are often bursty and since we 963 * sample higher rates 1 try at a time doing so 964 * may unfairly penalize them. 965 */ 966 if (rc[0].tries) { 967 update_stats(sc, an, frame_size, 968 rc[0].rix, rc[0].tries, 969 rc[1].rix, rc[1].tries, 970 rc[2].rix, rc[2].tries, 971 rc[3].rix, rc[3].tries, 972 short_tries, long_tries, 973 long_tries > rc[0].tries, 974 nframes, nbad); 975 long_tries -= rc[0].tries; 976 } 977 978 if (rc[1].tries && finalTSIdx > 0) { 979 update_stats(sc, an, frame_size, 980 rc[1].rix, rc[1].tries, 981 rc[2].rix, rc[2].tries, 982 rc[3].rix, rc[3].tries, 983 0, 0, 984 short_tries, long_tries, 985 status, 986 nframes, nbad); 987 long_tries -= rc[1].tries; 988 } 989 990 if (rc[2].tries && finalTSIdx > 1) { 991 update_stats(sc, an, frame_size, 992 rc[2].rix, rc[2].tries, 993 rc[3].rix, rc[3].tries, 994 0, 0, 995 0, 0, 996 short_tries, long_tries, 997 status, 998 nframes, nbad); 999 long_tries -= rc[2].tries; 1000 } 1001 1002 if (rc[3].tries && finalTSIdx > 2) { 1003 update_stats(sc, an, frame_size, 1004 rc[3].rix, rc[3].tries, 1005 0, 0, 1006 0, 0, 1007 0, 0, 1008 short_tries, long_tries, 1009 status, 1010 nframes, nbad); 1011 } 1012 } 1013 } 1014 1015 void 1016 ath_rate_newassoc(struct ath_softc *sc, struct ath_node *an, int isnew) 1017 { 1018 if (isnew) 1019 ath_rate_ctl_reset(sc, &an->an_node); 1020 } 1021 1022 void 1023 ath_rate_update_rx_rssi(struct ath_softc *sc, struct ath_node *an, int rssi) 1024 { 1025 } 1026 1027 1028 static const struct txschedule *mrr_schedules[IEEE80211_MODE_MAX+2] = { 1029 NULL, /* IEEE80211_MODE_AUTO */ 1030 series_11a, /* IEEE80211_MODE_11A */ 1031 series_11g, /* IEEE80211_MODE_11B */ 1032 series_11g, /* IEEE80211_MODE_11G */ 1033 NULL, /* IEEE80211_MODE_FH */ 1034 series_11a, /* IEEE80211_MODE_TURBO_A */ 1035 series_11g, /* IEEE80211_MODE_TURBO_G */ 1036 series_11a, /* IEEE80211_MODE_STURBO_A */ 1037 series_11na, /* IEEE80211_MODE_11NA */ 1038 series_11ng, /* IEEE80211_MODE_11NG */ 1039 series_half, /* IEEE80211_MODE_HALF */ 1040 series_quarter, /* IEEE80211_MODE_QUARTER */ 1041 }; 1042 1043 /* 1044 * Initialize the tables for a node. 1045 */ 1046 static void 1047 ath_rate_ctl_reset(struct ath_softc *sc, struct ieee80211_node *ni) 1048 { 1049 #define RATE(_ix) (ni->ni_rates.rs_rates[(_ix)] & IEEE80211_RATE_VAL) 1050 #define DOT11RATE(_ix) (rt->info[(_ix)].dot11Rate & IEEE80211_RATE_VAL) 1051 #define MCS(_ix) (ni->ni_htrates.rs_rates[_ix] | IEEE80211_RATE_MCS) 1052 struct ath_node *an = ATH_NODE(ni); 1053 struct sample_node *sn = ATH_NODE_SAMPLE(an); 1054 const HAL_RATE_TABLE *rt = sc->sc_currates; 1055 int x, y, rix; 1056 1057 KASSERT(rt != NULL, ("no rate table, mode %u", sc->sc_curmode)); 1058 1059 KASSERT(sc->sc_curmode < IEEE80211_MODE_MAX+2, 1060 ("curmode %u", sc->sc_curmode)); 1061 1062 sn->sched = mrr_schedules[sc->sc_curmode]; 1063 KASSERT(sn->sched != NULL, 1064 ("no mrr schedule for mode %u", sc->sc_curmode)); 1065 1066 sn->static_rix = -1; 1067 ath_rate_update_static_rix(sc, ni); 1068 1069 sn->currates = sc->sc_currates; 1070 1071 /* 1072 * Construct a bitmask of usable rates. This has all 1073 * negotiated rates minus those marked by the hal as 1074 * to be ignored for doing rate control. 1075 */ 1076 sn->ratemask = 0; 1077 /* MCS rates */ 1078 if (ni->ni_flags & IEEE80211_NODE_HT) { 1079 for (x = 0; x < ni->ni_htrates.rs_nrates; x++) { 1080 rix = sc->sc_rixmap[MCS(x)]; 1081 if (rix == 0xff) 1082 continue; 1083 /* skip rates marked broken by hal */ 1084 if (!rt->info[rix].valid) 1085 continue; 1086 KASSERT(rix < SAMPLE_MAXRATES, 1087 ("mcs %u has rix %d", MCS(x), rix)); 1088 sn->ratemask |= (uint64_t) 1<<rix; 1089 } 1090 } 1091 1092 /* Legacy rates */ 1093 for (x = 0; x < ni->ni_rates.rs_nrates; x++) { 1094 rix = sc->sc_rixmap[RATE(x)]; 1095 if (rix == 0xff) 1096 continue; 1097 /* skip rates marked broken by hal */ 1098 if (!rt->info[rix].valid) 1099 continue; 1100 KASSERT(rix < SAMPLE_MAXRATES, 1101 ("rate %u has rix %d", RATE(x), rix)); 1102 sn->ratemask |= (uint64_t) 1<<rix; 1103 } 1104 #ifdef IEEE80211_DEBUG 1105 if (ieee80211_msg(ni->ni_vap, IEEE80211_MSG_RATECTL)) { 1106 uint64_t mask; 1107 1108 ieee80211_note(ni->ni_vap, "[%6D] %s: size 1600 rate/tt", 1109 ni->ni_macaddr, ":", __func__); 1110 for (mask = sn->ratemask, rix = 0; mask != 0; mask >>= 1, rix++) { 1111 if ((mask & 1) == 0) 1112 continue; 1113 printf(" %d %s/%d", dot11rate(rt, rix), dot11rate_label(rt, rix), 1114 calc_usecs_unicast_packet(sc, 1600, rix, 0,0, 1115 (ni->ni_chw == 40))); 1116 } 1117 printf("\n"); 1118 } 1119 #endif 1120 for (y = 0; y < NUM_PACKET_SIZE_BINS; y++) { 1121 int size = bin_to_size(y); 1122 uint64_t mask; 1123 1124 sn->packets_sent[y] = 0; 1125 sn->current_sample_rix[y] = -1; 1126 sn->last_sample_rix[y] = 0; 1127 /* XXX start with first valid rate */ 1128 sn->current_rix[y] = ffs(sn->ratemask)-1; 1129 1130 /* 1131 * Initialize the statistics buckets; these are 1132 * indexed by the rate code index. 1133 */ 1134 for (rix = 0, mask = sn->ratemask; mask != 0; rix++, mask >>= 1) { 1135 if ((mask & 1) == 0) /* not a valid rate */ 1136 continue; 1137 sn->stats[y][rix].successive_failures = 0; 1138 sn->stats[y][rix].tries = 0; 1139 sn->stats[y][rix].total_packets = 0; 1140 sn->stats[y][rix].packets_acked = 0; 1141 sn->stats[y][rix].last_tx = 0; 1142 sn->stats[y][rix].ewma_pct = 0; 1143 1144 sn->stats[y][rix].perfect_tx_time = 1145 calc_usecs_unicast_packet(sc, size, rix, 0, 0, 1146 (ni->ni_chw == 40)); 1147 sn->stats[y][rix].average_tx_time = 1148 sn->stats[y][rix].perfect_tx_time; 1149 } 1150 } 1151 #if 0 1152 /* XXX 0, num_rates-1 are wrong */ 1153 IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_RATECTL, ni, 1154 "%s: %d rates %d%sMbps (%dus)- %d%sMbps (%dus)", __func__, 1155 sn->num_rates, 1156 DOT11RATE(0)/2, DOT11RATE(0) % 1 ? ".5" : "", 1157 sn->stats[1][0].perfect_tx_time, 1158 DOT11RATE(sn->num_rates-1)/2, DOT11RATE(sn->num_rates-1) % 1 ? ".5" : "", 1159 sn->stats[1][sn->num_rates-1].perfect_tx_time 1160 ); 1161 #endif 1162 /* set the visible bit-rate */ 1163 if (sn->static_rix != -1) 1164 ni->ni_txrate = DOT11RATE(sn->static_rix); 1165 else 1166 ni->ni_txrate = RATE(0); 1167 #undef RATE 1168 #undef DOT11RATE 1169 } 1170 1171 /* 1172 * Fetch the statistics for the given node. 1173 * 1174 * The ieee80211 node must be referenced and unlocked, however the ath_node 1175 * must be locked. 1176 * 1177 * The main difference here is that we convert the rate indexes 1178 * to 802.11 rates, or the userland output won't make much sense 1179 * as it has no access to the rix table. 1180 */ 1181 int 1182 ath_rate_fetch_node_stats(struct ath_softc *sc, struct ath_node *an, 1183 struct ath_rateioctl *rs) 1184 { 1185 struct sample_node *sn = ATH_NODE_SAMPLE(an); 1186 const HAL_RATE_TABLE *rt = sc->sc_currates; 1187 struct ath_rateioctl_tlv av; 1188 struct ath_rateioctl_rt *tv; 1189 int y; 1190 int o = 0; 1191 1192 ATH_NODE_LOCK_ASSERT(an); 1193 1194 /* 1195 * Ensure there's enough space for the statistics. 1196 */ 1197 if (rs->len < 1198 sizeof(struct ath_rateioctl_tlv) + 1199 sizeof(struct ath_rateioctl_rt) + 1200 sizeof(struct ath_rateioctl_tlv) + 1201 sizeof(struct sample_node)) { 1202 device_printf(sc->sc_dev, "%s: len=%d, too short\n", 1203 __func__, 1204 rs->len); 1205 return (EINVAL); 1206 } 1207 1208 /* 1209 * Take a temporary copy of the sample node state so we can 1210 * modify it before we copy it. 1211 */ 1212 tv = malloc(sizeof(struct ath_rateioctl_rt), M_TEMP, 1213 M_NOWAIT | M_ZERO); 1214 if (tv == NULL) { 1215 return (ENOMEM); 1216 } 1217 1218 /* 1219 * Populate the rate table mapping TLV. 1220 */ 1221 tv->nentries = rt->rateCount; 1222 for (y = 0; y < rt->rateCount; y++) { 1223 tv->ratecode[y] = rt->info[y].dot11Rate & IEEE80211_RATE_VAL; 1224 if (rt->info[y].phy == IEEE80211_T_HT) 1225 tv->ratecode[y] |= IEEE80211_RATE_MCS; 1226 } 1227 1228 o = 0; 1229 /* 1230 * First TLV - rate code mapping 1231 */ 1232 av.tlv_id = ATH_RATE_TLV_RATETABLE; 1233 av.tlv_len = sizeof(struct ath_rateioctl_rt); 1234 copyout(&av, rs->buf + o, sizeof(struct ath_rateioctl_tlv)); 1235 o += sizeof(struct ath_rateioctl_tlv); 1236 copyout(tv, rs->buf + o, sizeof(struct ath_rateioctl_rt)); 1237 o += sizeof(struct ath_rateioctl_rt); 1238 1239 /* 1240 * Second TLV - sample node statistics 1241 */ 1242 av.tlv_id = ATH_RATE_TLV_SAMPLENODE; 1243 av.tlv_len = sizeof(struct sample_node); 1244 copyout(&av, rs->buf + o, sizeof(struct ath_rateioctl_tlv)); 1245 o += sizeof(struct ath_rateioctl_tlv); 1246 1247 /* 1248 * Copy the statistics over to the provided buffer. 1249 */ 1250 copyout(sn, rs->buf + o, sizeof(struct sample_node)); 1251 o += sizeof(struct sample_node); 1252 1253 free(tv, M_TEMP); 1254 1255 return (0); 1256 } 1257 1258 static void 1259 sample_stats(void *arg, struct ieee80211_node *ni) 1260 { 1261 struct ath_softc *sc = arg; 1262 const HAL_RATE_TABLE *rt = sc->sc_currates; 1263 struct sample_node *sn = ATH_NODE_SAMPLE(ATH_NODE(ni)); 1264 uint64_t mask; 1265 int rix, y; 1266 1267 printf("\n[%s] refcnt %d static_rix (%d %s) ratemask 0x%jx\n", 1268 ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni), 1269 dot11rate(rt, sn->static_rix), 1270 dot11rate_label(rt, sn->static_rix), 1271 (uintmax_t)sn->ratemask); 1272 for (y = 0; y < NUM_PACKET_SIZE_BINS; y++) { 1273 printf("[%4u] cur rix %d (%d %s) since switch: packets %d ticks %u\n", 1274 bin_to_size(y), sn->current_rix[y], 1275 dot11rate(rt, sn->current_rix[y]), 1276 dot11rate_label(rt, sn->current_rix[y]), 1277 sn->packets_since_switch[y], sn->ticks_since_switch[y]); 1278 printf("[%4u] last sample (%d %s) cur sample (%d %s) packets sent %d\n", 1279 bin_to_size(y), 1280 dot11rate(rt, sn->last_sample_rix[y]), 1281 dot11rate_label(rt, sn->last_sample_rix[y]), 1282 dot11rate(rt, sn->current_sample_rix[y]), 1283 dot11rate_label(rt, sn->current_sample_rix[y]), 1284 sn->packets_sent[y]); 1285 printf("[%4u] packets since sample %d sample tt %u\n", 1286 bin_to_size(y), sn->packets_since_sample[y], 1287 sn->sample_tt[y]); 1288 } 1289 for (mask = sn->ratemask, rix = 0; mask != 0; mask >>= 1, rix++) { 1290 if ((mask & 1) == 0) 1291 continue; 1292 for (y = 0; y < NUM_PACKET_SIZE_BINS; y++) { 1293 if (sn->stats[y][rix].total_packets == 0) 1294 continue; 1295 printf("[%2u %s:%4u] %8ju:%-8ju (%3d%%) (EWMA %3d.%1d%%) T %8ju F %4d avg %5u last %u\n", 1296 dot11rate(rt, rix), dot11rate_label(rt, rix), 1297 bin_to_size(y), 1298 (uintmax_t) sn->stats[y][rix].total_packets, 1299 (uintmax_t) sn->stats[y][rix].packets_acked, 1300 (int) ((sn->stats[y][rix].packets_acked * 100ULL) / 1301 sn->stats[y][rix].total_packets), 1302 sn->stats[y][rix].ewma_pct / 10, 1303 sn->stats[y][rix].ewma_pct % 10, 1304 (uintmax_t) sn->stats[y][rix].tries, 1305 sn->stats[y][rix].successive_failures, 1306 sn->stats[y][rix].average_tx_time, 1307 ticks - sn->stats[y][rix].last_tx); 1308 } 1309 } 1310 } 1311 1312 static int 1313 ath_rate_sysctl_stats(SYSCTL_HANDLER_ARGS) 1314 { 1315 struct ath_softc *sc = arg1; 1316 struct ieee80211com *ic = &sc->sc_ic; 1317 int error, v; 1318 1319 v = 0; 1320 error = sysctl_handle_int(oidp, &v, 0, req); 1321 if (error || !req->newptr) 1322 return error; 1323 ieee80211_iterate_nodes(&ic->ic_sta, sample_stats, sc); 1324 return 0; 1325 } 1326 1327 static int 1328 ath_rate_sysctl_smoothing_rate(SYSCTL_HANDLER_ARGS) 1329 { 1330 struct sample_softc *ssc = arg1; 1331 int rate, error; 1332 1333 rate = ssc->smoothing_rate; 1334 error = sysctl_handle_int(oidp, &rate, 0, req); 1335 if (error || !req->newptr) 1336 return error; 1337 if (!(0 <= rate && rate < 100)) 1338 return EINVAL; 1339 ssc->smoothing_rate = rate; 1340 ssc->smoothing_minpackets = 100 / (100 - rate); 1341 return 0; 1342 } 1343 1344 static int 1345 ath_rate_sysctl_sample_rate(SYSCTL_HANDLER_ARGS) 1346 { 1347 struct sample_softc *ssc = arg1; 1348 int rate, error; 1349 1350 rate = ssc->sample_rate; 1351 error = sysctl_handle_int(oidp, &rate, 0, req); 1352 if (error || !req->newptr) 1353 return error; 1354 if (!(2 <= rate && rate <= 100)) 1355 return EINVAL; 1356 ssc->sample_rate = rate; 1357 return 0; 1358 } 1359 1360 static void 1361 ath_rate_sysctlattach(struct ath_softc *sc, struct sample_softc *ssc) 1362 { 1363 struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(sc->sc_dev); 1364 struct sysctl_oid *tree = device_get_sysctl_tree(sc->sc_dev); 1365 1366 SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 1367 "smoothing_rate", CTLTYPE_INT | CTLFLAG_RW, ssc, 0, 1368 ath_rate_sysctl_smoothing_rate, "I", 1369 "sample: smoothing rate for avg tx time (%%)"); 1370 SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 1371 "sample_rate", CTLTYPE_INT | CTLFLAG_RW, ssc, 0, 1372 ath_rate_sysctl_sample_rate, "I", 1373 "sample: percent air time devoted to sampling new rates (%%)"); 1374 /* XXX max_successive_failures, stale_failure_timeout, min_switch */ 1375 SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 1376 "sample_stats", CTLTYPE_INT | CTLFLAG_RW, sc, 0, 1377 ath_rate_sysctl_stats, "I", "sample: print statistics"); 1378 } 1379 1380 struct ath_ratectrl * 1381 ath_rate_attach(struct ath_softc *sc) 1382 { 1383 struct sample_softc *ssc; 1384 1385 ssc = malloc(sizeof(struct sample_softc), M_DEVBUF, M_NOWAIT|M_ZERO); 1386 if (ssc == NULL) 1387 return NULL; 1388 ssc->arc.arc_space = sizeof(struct sample_node); 1389 ssc->smoothing_rate = 75; /* ewma percentage ([0..99]) */ 1390 ssc->smoothing_minpackets = 100 / (100 - ssc->smoothing_rate); 1391 ssc->sample_rate = 10; /* %time to try diff tx rates */ 1392 ssc->max_successive_failures = 3; /* threshold for rate sampling*/ 1393 ssc->stale_failure_timeout = 10 * hz; /* 10 seconds */ 1394 ssc->min_switch = hz; /* 1 second */ 1395 ath_rate_sysctlattach(sc, ssc); 1396 return &ssc->arc; 1397 } 1398 1399 void 1400 ath_rate_detach(struct ath_ratectrl *arc) 1401 { 1402 struct sample_softc *ssc = (struct sample_softc *) arc; 1403 1404 free(ssc, M_DEVBUF); 1405 } 1406