1 /*- 2 * Copyright (c) 2005 John Bicket 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer, 10 * without modification. 11 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 12 * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any 13 * redistribution must be conditioned upon including a substantially 14 * similar Disclaimer requirement for further binary redistribution. 15 * 3. Neither the names of the above-listed copyright holders nor the names 16 * of any contributors may be used to endorse or promote products derived 17 * from this software without specific prior written permission. 18 * 19 * Alternatively, this software may be distributed under the terms of the 20 * GNU General Public License ("GPL") version 2 as published by the Free 21 * Software Foundation. 22 * 23 * NO WARRANTY 24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 25 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 26 * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY 27 * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL 28 * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, 29 * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 31 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER 32 * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 33 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 34 * THE POSSIBILITY OF SUCH DAMAGES. 35 * 36 */ 37 38 #include <sys/cdefs.h> 39 __FBSDID("$FreeBSD$"); 40 41 /* 42 * John Bicket's SampleRate control algorithm. 43 */ 44 #include "opt_ath.h" 45 #include "opt_inet.h" 46 #include "opt_wlan.h" 47 #include "opt_ah.h" 48 49 #include <sys/param.h> 50 #include <sys/systm.h> 51 #include <sys/sysctl.h> 52 #include <sys/kernel.h> 53 #include <sys/lock.h> 54 #include <sys/malloc.h> 55 #include <sys/mutex.h> 56 #include <sys/errno.h> 57 58 #include <machine/bus.h> 59 #include <machine/resource.h> 60 #include <sys/bus.h> 61 62 #include <sys/socket.h> 63 64 #include <net/if.h> 65 #include <net/if_var.h> 66 #include <net/if_media.h> 67 #include <net/if_arp.h> 68 #include <net/ethernet.h> /* XXX for ether_sprintf */ 69 70 #include <net80211/ieee80211_var.h> 71 72 #include <net/bpf.h> 73 74 #ifdef INET 75 #include <netinet/in.h> 76 #include <netinet/if_ether.h> 77 #endif 78 79 #include <dev/ath/if_athvar.h> 80 #include <dev/ath/ath_rate/sample/sample.h> 81 #include <dev/ath/ath_hal/ah_desc.h> 82 #include <dev/ath/ath_rate/sample/tx_schedules.h> 83 84 /* 85 * This file is an implementation of the SampleRate algorithm 86 * in "Bit-rate Selection in Wireless Networks" 87 * (http://www.pdos.lcs.mit.edu/papers/jbicket-ms.ps) 88 * 89 * SampleRate chooses the bit-rate it predicts will provide the most 90 * throughput based on estimates of the expected per-packet 91 * transmission time for each bit-rate. SampleRate periodically sends 92 * packets at bit-rates other than the current one to estimate when 93 * another bit-rate will provide better performance. SampleRate 94 * switches to another bit-rate when its estimated per-packet 95 * transmission time becomes smaller than the current bit-rate's. 96 * SampleRate reduces the number of bit-rates it must sample by 97 * eliminating those that could not perform better than the one 98 * currently being used. SampleRate also stops probing at a bit-rate 99 * if it experiences several successive losses. 100 * 101 * The difference between the algorithm in the thesis and the one in this 102 * file is that the one in this file uses a ewma instead of a window. 103 * 104 * Also, this implementation tracks the average transmission time for 105 * a few different packet sizes independently for each link. 106 */ 107 108 static void ath_rate_ctl_reset(struct ath_softc *, struct ieee80211_node *); 109 110 static __inline int 111 size_to_bin(int size) 112 { 113 #if NUM_PACKET_SIZE_BINS > 1 114 if (size <= packet_size_bins[0]) 115 return 0; 116 #endif 117 #if NUM_PACKET_SIZE_BINS > 2 118 if (size <= packet_size_bins[1]) 119 return 1; 120 #endif 121 #if NUM_PACKET_SIZE_BINS > 3 122 if (size <= packet_size_bins[2]) 123 return 2; 124 #endif 125 #if NUM_PACKET_SIZE_BINS > 4 126 #error "add support for more packet sizes" 127 #endif 128 return NUM_PACKET_SIZE_BINS-1; 129 } 130 131 void 132 ath_rate_node_init(struct ath_softc *sc, struct ath_node *an) 133 { 134 /* NB: assumed to be zero'd by caller */ 135 } 136 137 void 138 ath_rate_node_cleanup(struct ath_softc *sc, struct ath_node *an) 139 { 140 } 141 142 static int 143 dot11rate(const HAL_RATE_TABLE *rt, int rix) 144 { 145 if (rix < 0) 146 return -1; 147 return rt->info[rix].phy == IEEE80211_T_HT ? 148 rt->info[rix].dot11Rate : (rt->info[rix].dot11Rate & IEEE80211_RATE_VAL) / 2; 149 } 150 151 static const char * 152 dot11rate_label(const HAL_RATE_TABLE *rt, int rix) 153 { 154 if (rix < 0) 155 return ""; 156 return rt->info[rix].phy == IEEE80211_T_HT ? "MCS" : "Mb "; 157 } 158 159 /* 160 * Return the rix with the lowest average_tx_time, 161 * or -1 if all the average_tx_times are 0. 162 */ 163 static __inline int 164 pick_best_rate(struct ath_node *an, const HAL_RATE_TABLE *rt, 165 int size_bin, int require_acked_before) 166 { 167 struct sample_node *sn = ATH_NODE_SAMPLE(an); 168 int best_rate_rix, best_rate_tt, best_rate_pct; 169 uint64_t mask; 170 int rix, tt, pct; 171 172 best_rate_rix = 0; 173 best_rate_tt = 0; 174 best_rate_pct = 0; 175 for (mask = sn->ratemask, rix = 0; mask != 0; mask >>= 1, rix++) { 176 if ((mask & 1) == 0) /* not a supported rate */ 177 continue; 178 179 /* Don't pick a non-HT rate for a HT node */ 180 if ((an->an_node.ni_flags & IEEE80211_NODE_HT) && 181 (rt->info[rix].phy != IEEE80211_T_HT)) { 182 continue; 183 } 184 185 tt = sn->stats[size_bin][rix].average_tx_time; 186 if (tt <= 0 || 187 (require_acked_before && 188 !sn->stats[size_bin][rix].packets_acked)) 189 continue; 190 191 /* Calculate percentage if possible */ 192 if (sn->stats[size_bin][rix].total_packets > 0) { 193 pct = sn->stats[size_bin][rix].ewma_pct; 194 } else { 195 /* XXX for now, assume 95% ok */ 196 pct = 95; 197 } 198 199 /* don't use a bit-rate that has been failing */ 200 if (sn->stats[size_bin][rix].successive_failures > 3) 201 continue; 202 203 /* 204 * For HT, Don't use a bit rate that is much more 205 * lossy than the best. 206 * 207 * XXX this isn't optimal; it's just designed to 208 * eliminate rates that are going to be obviously 209 * worse. 210 */ 211 if (an->an_node.ni_flags & IEEE80211_NODE_HT) { 212 if (best_rate_pct > (pct + 50)) 213 continue; 214 } 215 216 /* 217 * For non-MCS rates, use the current average txtime for 218 * comparison. 219 */ 220 if (! (an->an_node.ni_flags & IEEE80211_NODE_HT)) { 221 if (best_rate_tt == 0 || tt <= best_rate_tt) { 222 best_rate_tt = tt; 223 best_rate_rix = rix; 224 best_rate_pct = pct; 225 } 226 } 227 228 /* 229 * Since 2 stream rates have slightly higher TX times, 230 * allow a little bit of leeway. This should later 231 * be abstracted out and properly handled. 232 */ 233 if (an->an_node.ni_flags & IEEE80211_NODE_HT) { 234 if (best_rate_tt == 0 || (tt * 8 <= best_rate_tt * 10)) { 235 best_rate_tt = tt; 236 best_rate_rix = rix; 237 best_rate_pct = pct; 238 } 239 } 240 } 241 return (best_rate_tt ? best_rate_rix : -1); 242 } 243 244 /* 245 * Pick a good "random" bit-rate to sample other than the current one. 246 */ 247 static __inline int 248 pick_sample_rate(struct sample_softc *ssc , struct ath_node *an, 249 const HAL_RATE_TABLE *rt, int size_bin) 250 { 251 #define DOT11RATE(ix) (rt->info[ix].dot11Rate & IEEE80211_RATE_VAL) 252 #define MCS(ix) (rt->info[ix].dot11Rate | IEEE80211_RATE_MCS) 253 struct sample_node *sn = ATH_NODE_SAMPLE(an); 254 int current_rix, rix; 255 unsigned current_tt; 256 uint64_t mask; 257 258 current_rix = sn->current_rix[size_bin]; 259 if (current_rix < 0) { 260 /* no successes yet, send at the lowest bit-rate */ 261 /* XXX should return MCS0 if HT */ 262 return 0; 263 } 264 265 current_tt = sn->stats[size_bin][current_rix].average_tx_time; 266 267 rix = sn->last_sample_rix[size_bin]+1; /* next sample rate */ 268 mask = sn->ratemask &~ ((uint64_t) 1<<current_rix);/* don't sample current rate */ 269 while (mask != 0) { 270 if ((mask & ((uint64_t) 1<<rix)) == 0) { /* not a supported rate */ 271 nextrate: 272 if (++rix >= rt->rateCount) 273 rix = 0; 274 continue; 275 } 276 277 /* 278 * The following code stops trying to sample 279 * non-MCS rates when speaking to an MCS node. 280 * However, at least for CCK rates in 2.4GHz mode, 281 * the non-MCS rates MAY actually provide better 282 * PER at the very far edge of reception. 283 * 284 * However! Until ath_rate_form_aggr() grows 285 * some logic to not form aggregates if the 286 * selected rate is non-MCS, this won't work. 287 * 288 * So don't disable this code until you've taught 289 * ath_rate_form_aggr() to drop out if any of 290 * the selected rates are non-MCS. 291 */ 292 #if 1 293 /* if the node is HT and the rate isn't HT, don't bother sample */ 294 if ((an->an_node.ni_flags & IEEE80211_NODE_HT) && 295 (rt->info[rix].phy != IEEE80211_T_HT)) { 296 mask &= ~((uint64_t) 1<<rix); 297 goto nextrate; 298 } 299 #endif 300 301 /* this bit-rate is always worse than the current one */ 302 if (sn->stats[size_bin][rix].perfect_tx_time > current_tt) { 303 mask &= ~((uint64_t) 1<<rix); 304 goto nextrate; 305 } 306 307 /* rarely sample bit-rates that fail a lot */ 308 if (sn->stats[size_bin][rix].successive_failures > ssc->max_successive_failures && 309 ticks - sn->stats[size_bin][rix].last_tx < ssc->stale_failure_timeout) { 310 mask &= ~((uint64_t) 1<<rix); 311 goto nextrate; 312 } 313 314 /* 315 * For HT, only sample a few rates on either side of the 316 * current rix; there's quite likely a lot of them. 317 */ 318 if (an->an_node.ni_flags & IEEE80211_NODE_HT) { 319 if (rix < (current_rix - 3) || 320 rix > (current_rix + 3)) { 321 mask &= ~((uint64_t) 1<<rix); 322 goto nextrate; 323 } 324 } 325 326 /* Don't sample more than 2 rates higher for rates > 11M for non-HT rates */ 327 if (! (an->an_node.ni_flags & IEEE80211_NODE_HT)) { 328 if (DOT11RATE(rix) > 2*11 && rix > current_rix + 2) { 329 mask &= ~((uint64_t) 1<<rix); 330 goto nextrate; 331 } 332 } 333 334 sn->last_sample_rix[size_bin] = rix; 335 return rix; 336 } 337 return current_rix; 338 #undef DOT11RATE 339 #undef MCS 340 } 341 342 static int 343 ath_rate_get_static_rix(struct ath_softc *sc, const struct ieee80211_node *ni) 344 { 345 #define RATE(_ix) (ni->ni_rates.rs_rates[(_ix)] & IEEE80211_RATE_VAL) 346 #define DOT11RATE(_ix) (rt->info[(_ix)].dot11Rate & IEEE80211_RATE_VAL) 347 #define MCS(_ix) (ni->ni_htrates.rs_rates[_ix] | IEEE80211_RATE_MCS) 348 const struct ieee80211_txparam *tp = ni->ni_txparms; 349 int srate; 350 351 /* Check MCS rates */ 352 for (srate = ni->ni_htrates.rs_nrates - 1; srate >= 0; srate--) { 353 if (MCS(srate) == tp->ucastrate) 354 return sc->sc_rixmap[tp->ucastrate]; 355 } 356 357 /* Check legacy rates */ 358 for (srate = ni->ni_rates.rs_nrates - 1; srate >= 0; srate--) { 359 if (RATE(srate) == tp->ucastrate) 360 return sc->sc_rixmap[tp->ucastrate]; 361 } 362 return -1; 363 #undef RATE 364 #undef DOT11RATE 365 #undef MCS 366 } 367 368 static void 369 ath_rate_update_static_rix(struct ath_softc *sc, struct ieee80211_node *ni) 370 { 371 struct ath_node *an = ATH_NODE(ni); 372 const struct ieee80211_txparam *tp = ni->ni_txparms; 373 struct sample_node *sn = ATH_NODE_SAMPLE(an); 374 375 if (tp != NULL && tp->ucastrate != IEEE80211_FIXED_RATE_NONE) { 376 /* 377 * A fixed rate is to be used; ucastrate is the IEEE code 378 * for this rate (sans basic bit). Check this against the 379 * negotiated rate set for the node. Note the fixed rate 380 * may not be available for various reasons so we only 381 * setup the static rate index if the lookup is successful. 382 */ 383 sn->static_rix = ath_rate_get_static_rix(sc, ni); 384 } else { 385 sn->static_rix = -1; 386 } 387 } 388 389 /* 390 * Pick a non-HT rate to begin using. 391 */ 392 static int 393 ath_rate_pick_seed_rate_legacy(struct ath_softc *sc, struct ath_node *an, 394 int frameLen) 395 { 396 #define DOT11RATE(ix) (rt->info[ix].dot11Rate & IEEE80211_RATE_VAL) 397 #define MCS(ix) (rt->info[ix].dot11Rate | IEEE80211_RATE_MCS) 398 #define RATE(ix) (DOT11RATE(ix) / 2) 399 int rix = -1; 400 const HAL_RATE_TABLE *rt = sc->sc_currates; 401 struct sample_node *sn = ATH_NODE_SAMPLE(an); 402 const int size_bin = size_to_bin(frameLen); 403 404 /* no packet has been sent successfully yet */ 405 for (rix = rt->rateCount-1; rix > 0; rix--) { 406 if ((sn->ratemask & ((uint64_t) 1<<rix)) == 0) 407 continue; 408 409 /* Skip HT rates */ 410 if (rt->info[rix].phy == IEEE80211_T_HT) 411 continue; 412 413 /* 414 * Pick the highest rate <= 36 Mbps 415 * that hasn't failed. 416 */ 417 if (DOT11RATE(rix) <= 72 && 418 sn->stats[size_bin][rix].successive_failures == 0) { 419 break; 420 } 421 } 422 return rix; 423 #undef RATE 424 #undef MCS 425 #undef DOT11RATE 426 } 427 428 /* 429 * Pick a HT rate to begin using. 430 * 431 * Don't use any non-HT rates; only consider HT rates. 432 */ 433 static int 434 ath_rate_pick_seed_rate_ht(struct ath_softc *sc, struct ath_node *an, 435 int frameLen) 436 { 437 #define DOT11RATE(ix) (rt->info[ix].dot11Rate & IEEE80211_RATE_VAL) 438 #define MCS(ix) (rt->info[ix].dot11Rate | IEEE80211_RATE_MCS) 439 #define RATE(ix) (DOT11RATE(ix) / 2) 440 int rix = -1, ht_rix = -1; 441 const HAL_RATE_TABLE *rt = sc->sc_currates; 442 struct sample_node *sn = ATH_NODE_SAMPLE(an); 443 const int size_bin = size_to_bin(frameLen); 444 445 /* no packet has been sent successfully yet */ 446 for (rix = rt->rateCount-1; rix > 0; rix--) { 447 /* Skip rates we can't use */ 448 if ((sn->ratemask & ((uint64_t) 1<<rix)) == 0) 449 continue; 450 451 /* Keep a copy of the last seen HT rate index */ 452 if (rt->info[rix].phy == IEEE80211_T_HT) 453 ht_rix = rix; 454 455 /* Skip non-HT rates */ 456 if (rt->info[rix].phy != IEEE80211_T_HT) 457 continue; 458 459 /* 460 * Pick a medium-speed rate regardless of stream count 461 * which has not seen any failures. Higher rates may fail; 462 * we'll try them later. 463 */ 464 if (((MCS(rix) & 0x7) <= 4) && 465 sn->stats[size_bin][rix].successive_failures == 0) { 466 break; 467 } 468 } 469 470 /* 471 * If all the MCS rates have successive failures, rix should be 472 * > 0; otherwise use the lowest MCS rix (hopefully MCS 0.) 473 */ 474 return MAX(rix, ht_rix); 475 #undef RATE 476 #undef MCS 477 #undef DOT11RATE 478 } 479 480 481 void 482 ath_rate_findrate(struct ath_softc *sc, struct ath_node *an, 483 int shortPreamble, size_t frameLen, 484 u_int8_t *rix0, int *try0, u_int8_t *txrate) 485 { 486 #define DOT11RATE(ix) (rt->info[ix].dot11Rate & IEEE80211_RATE_VAL) 487 #define MCS(ix) (rt->info[ix].dot11Rate | IEEE80211_RATE_MCS) 488 #define RATE(ix) (DOT11RATE(ix) / 2) 489 struct sample_node *sn = ATH_NODE_SAMPLE(an); 490 struct sample_softc *ssc = ATH_SOFTC_SAMPLE(sc); 491 struct ifnet *ifp = sc->sc_ifp; 492 struct ieee80211com *ic = ifp->if_l2com; 493 const HAL_RATE_TABLE *rt = sc->sc_currates; 494 const int size_bin = size_to_bin(frameLen); 495 int rix, mrr, best_rix, change_rates; 496 unsigned average_tx_time; 497 498 ath_rate_update_static_rix(sc, &an->an_node); 499 500 if (sn->currates != sc->sc_currates) { 501 device_printf(sc->sc_dev, "%s: currates != sc_currates!\n", 502 __func__); 503 rix = 0; 504 *try0 = ATH_TXMAXTRY; 505 goto done; 506 } 507 508 if (sn->static_rix != -1) { 509 rix = sn->static_rix; 510 *try0 = ATH_TXMAXTRY; 511 goto done; 512 } 513 514 mrr = sc->sc_mrretry; 515 /* XXX check HT protmode too */ 516 if (mrr && (ic->ic_flags & IEEE80211_F_USEPROT && !sc->sc_mrrprot)) 517 mrr = 0; 518 519 best_rix = pick_best_rate(an, rt, size_bin, !mrr); 520 if (best_rix >= 0) { 521 average_tx_time = sn->stats[size_bin][best_rix].average_tx_time; 522 } else { 523 average_tx_time = 0; 524 } 525 /* 526 * Limit the time measuring the performance of other tx 527 * rates to sample_rate% of the total transmission time. 528 */ 529 if (sn->sample_tt[size_bin] < average_tx_time * (sn->packets_since_sample[size_bin]*ssc->sample_rate/100)) { 530 rix = pick_sample_rate(ssc, an, rt, size_bin); 531 IEEE80211_NOTE(an->an_node.ni_vap, IEEE80211_MSG_RATECTL, 532 &an->an_node, "att %d sample_tt %d size %u sample rate %d %s current rate %d %s", 533 average_tx_time, 534 sn->sample_tt[size_bin], 535 bin_to_size(size_bin), 536 dot11rate(rt, rix), 537 dot11rate_label(rt, rix), 538 dot11rate(rt, sn->current_rix[size_bin]), 539 dot11rate_label(rt, sn->current_rix[size_bin])); 540 if (rix != sn->current_rix[size_bin]) { 541 sn->current_sample_rix[size_bin] = rix; 542 } else { 543 sn->current_sample_rix[size_bin] = -1; 544 } 545 sn->packets_since_sample[size_bin] = 0; 546 } else { 547 change_rates = 0; 548 if (!sn->packets_sent[size_bin] || best_rix == -1) { 549 /* no packet has been sent successfully yet */ 550 change_rates = 1; 551 if (an->an_node.ni_flags & IEEE80211_NODE_HT) 552 best_rix = 553 ath_rate_pick_seed_rate_ht(sc, an, frameLen); 554 else 555 best_rix = 556 ath_rate_pick_seed_rate_legacy(sc, an, frameLen); 557 } else if (sn->packets_sent[size_bin] < 20) { 558 /* let the bit-rate switch quickly during the first few packets */ 559 IEEE80211_NOTE(an->an_node.ni_vap, 560 IEEE80211_MSG_RATECTL, &an->an_node, 561 "%s: switching quickly..", __func__); 562 change_rates = 1; 563 } else if (ticks - ssc->min_switch > sn->ticks_since_switch[size_bin]) { 564 /* min_switch seconds have gone by */ 565 IEEE80211_NOTE(an->an_node.ni_vap, 566 IEEE80211_MSG_RATECTL, &an->an_node, 567 "%s: min_switch %d > ticks_since_switch %d..", 568 __func__, ticks - ssc->min_switch, sn->ticks_since_switch[size_bin]); 569 change_rates = 1; 570 } else if ((! (an->an_node.ni_flags & IEEE80211_NODE_HT)) && 571 (2*average_tx_time < sn->stats[size_bin][sn->current_rix[size_bin]].average_tx_time)) { 572 /* the current bit-rate is twice as slow as the best one */ 573 IEEE80211_NOTE(an->an_node.ni_vap, 574 IEEE80211_MSG_RATECTL, &an->an_node, 575 "%s: 2x att (= %d) < cur_rix att %d", 576 __func__, 577 2 * average_tx_time, sn->stats[size_bin][sn->current_rix[size_bin]].average_tx_time); 578 change_rates = 1; 579 } else if ((an->an_node.ni_flags & IEEE80211_NODE_HT)) { 580 int cur_rix = sn->current_rix[size_bin]; 581 int cur_att = sn->stats[size_bin][cur_rix].average_tx_time; 582 /* 583 * If the node is HT, upgrade it if the MCS rate is 584 * higher and the average tx time is within 20% of 585 * the current rate. It can fail a little. 586 * 587 * This is likely not optimal! 588 */ 589 #if 0 590 printf("cur rix/att %x/%d, best rix/att %x/%d\n", 591 MCS(cur_rix), cur_att, MCS(best_rix), average_tx_time); 592 #endif 593 if ((MCS(best_rix) > MCS(cur_rix)) && 594 (average_tx_time * 8) <= (cur_att * 10)) { 595 IEEE80211_NOTE(an->an_node.ni_vap, 596 IEEE80211_MSG_RATECTL, &an->an_node, 597 "%s: HT: best_rix 0x%d > cur_rix 0x%x, average_tx_time %d, cur_att %d", 598 __func__, 599 MCS(best_rix), MCS(cur_rix), average_tx_time, cur_att); 600 change_rates = 1; 601 } 602 } 603 604 sn->packets_since_sample[size_bin]++; 605 606 if (change_rates) { 607 if (best_rix != sn->current_rix[size_bin]) { 608 IEEE80211_NOTE(an->an_node.ni_vap, 609 IEEE80211_MSG_RATECTL, 610 &an->an_node, 611 "%s: size %d switch rate %d (%d/%d) -> %d (%d/%d) after %d packets mrr %d", 612 __func__, 613 bin_to_size(size_bin), 614 RATE(sn->current_rix[size_bin]), 615 sn->stats[size_bin][sn->current_rix[size_bin]].average_tx_time, 616 sn->stats[size_bin][sn->current_rix[size_bin]].perfect_tx_time, 617 RATE(best_rix), 618 sn->stats[size_bin][best_rix].average_tx_time, 619 sn->stats[size_bin][best_rix].perfect_tx_time, 620 sn->packets_since_switch[size_bin], 621 mrr); 622 } 623 sn->packets_since_switch[size_bin] = 0; 624 sn->current_rix[size_bin] = best_rix; 625 sn->ticks_since_switch[size_bin] = ticks; 626 /* 627 * Set the visible txrate for this node. 628 */ 629 an->an_node.ni_txrate = (rt->info[best_rix].phy == IEEE80211_T_HT) ? MCS(best_rix) : DOT11RATE(best_rix); 630 } 631 rix = sn->current_rix[size_bin]; 632 sn->packets_since_switch[size_bin]++; 633 } 634 *try0 = mrr ? sn->sched[rix].t0 : ATH_TXMAXTRY; 635 done: 636 637 /* 638 * This bug totally sucks and should be fixed. 639 * 640 * For now though, let's not panic, so we can start to figure 641 * out how to better reproduce it. 642 */ 643 if (rix < 0 || rix >= rt->rateCount) { 644 printf("%s: ERROR: rix %d out of bounds (rateCount=%d)\n", 645 __func__, 646 rix, 647 rt->rateCount); 648 rix = 0; /* XXX just default for now */ 649 } 650 KASSERT(rix >= 0 && rix < rt->rateCount, ("rix is %d", rix)); 651 652 *rix0 = rix; 653 *txrate = rt->info[rix].rateCode 654 | (shortPreamble ? rt->info[rix].shortPreamble : 0); 655 sn->packets_sent[size_bin]++; 656 #undef DOT11RATE 657 #undef MCS 658 #undef RATE 659 } 660 661 /* 662 * Get the TX rates. Don't fiddle with short preamble flags for them; 663 * the caller can do that. 664 */ 665 void 666 ath_rate_getxtxrates(struct ath_softc *sc, struct ath_node *an, 667 uint8_t rix0, struct ath_rc_series *rc) 668 { 669 struct sample_node *sn = ATH_NODE_SAMPLE(an); 670 const struct txschedule *sched = &sn->sched[rix0]; 671 672 KASSERT(rix0 == sched->r0, ("rix0 (%x) != sched->r0 (%x)!\n", 673 rix0, sched->r0)); 674 675 rc[0].flags = rc[1].flags = rc[2].flags = rc[3].flags = 0; 676 677 rc[0].rix = sched->r0; 678 rc[1].rix = sched->r1; 679 rc[2].rix = sched->r2; 680 rc[3].rix = sched->r3; 681 682 rc[0].tries = sched->t0; 683 rc[1].tries = sched->t1; 684 rc[2].tries = sched->t2; 685 rc[3].tries = sched->t3; 686 } 687 688 void 689 ath_rate_setupxtxdesc(struct ath_softc *sc, struct ath_node *an, 690 struct ath_desc *ds, int shortPreamble, u_int8_t rix) 691 { 692 struct sample_node *sn = ATH_NODE_SAMPLE(an); 693 const struct txschedule *sched = &sn->sched[rix]; 694 const HAL_RATE_TABLE *rt = sc->sc_currates; 695 uint8_t rix1, s1code, rix2, s2code, rix3, s3code; 696 697 /* XXX precalculate short preamble tables */ 698 rix1 = sched->r1; 699 s1code = rt->info[rix1].rateCode 700 | (shortPreamble ? rt->info[rix1].shortPreamble : 0); 701 rix2 = sched->r2; 702 s2code = rt->info[rix2].rateCode 703 | (shortPreamble ? rt->info[rix2].shortPreamble : 0); 704 rix3 = sched->r3; 705 s3code = rt->info[rix3].rateCode 706 | (shortPreamble ? rt->info[rix3].shortPreamble : 0); 707 ath_hal_setupxtxdesc(sc->sc_ah, ds, 708 s1code, sched->t1, /* series 1 */ 709 s2code, sched->t2, /* series 2 */ 710 s3code, sched->t3); /* series 3 */ 711 } 712 713 static void 714 update_stats(struct ath_softc *sc, struct ath_node *an, 715 int frame_size, 716 int rix0, int tries0, 717 int rix1, int tries1, 718 int rix2, int tries2, 719 int rix3, int tries3, 720 int short_tries, int tries, int status, 721 int nframes, int nbad) 722 { 723 struct sample_node *sn = ATH_NODE_SAMPLE(an); 724 struct sample_softc *ssc = ATH_SOFTC_SAMPLE(sc); 725 #ifdef IEEE80211_DEBUG 726 const HAL_RATE_TABLE *rt = sc->sc_currates; 727 #endif 728 const int size_bin = size_to_bin(frame_size); 729 const int size = bin_to_size(size_bin); 730 int tt, tries_so_far; 731 int is_ht40 = (an->an_node.ni_chw == 40); 732 int pct; 733 734 if (!IS_RATE_DEFINED(sn, rix0)) 735 return; 736 tt = calc_usecs_unicast_packet(sc, size, rix0, short_tries, 737 MIN(tries0, tries) - 1, is_ht40); 738 tries_so_far = tries0; 739 740 if (tries1 && tries_so_far < tries) { 741 if (!IS_RATE_DEFINED(sn, rix1)) 742 return; 743 tt += calc_usecs_unicast_packet(sc, size, rix1, short_tries, 744 MIN(tries1 + tries_so_far, tries) - tries_so_far - 1, is_ht40); 745 tries_so_far += tries1; 746 } 747 748 if (tries2 && tries_so_far < tries) { 749 if (!IS_RATE_DEFINED(sn, rix2)) 750 return; 751 tt += calc_usecs_unicast_packet(sc, size, rix2, short_tries, 752 MIN(tries2 + tries_so_far, tries) - tries_so_far - 1, is_ht40); 753 tries_so_far += tries2; 754 } 755 756 if (tries3 && tries_so_far < tries) { 757 if (!IS_RATE_DEFINED(sn, rix3)) 758 return; 759 tt += calc_usecs_unicast_packet(sc, size, rix3, short_tries, 760 MIN(tries3 + tries_so_far, tries) - tries_so_far - 1, is_ht40); 761 } 762 763 if (sn->stats[size_bin][rix0].total_packets < ssc->smoothing_minpackets) { 764 /* just average the first few packets */ 765 int avg_tx = sn->stats[size_bin][rix0].average_tx_time; 766 int packets = sn->stats[size_bin][rix0].total_packets; 767 sn->stats[size_bin][rix0].average_tx_time = (tt+(avg_tx*packets))/(packets+nframes); 768 } else { 769 /* use a ewma */ 770 sn->stats[size_bin][rix0].average_tx_time = 771 ((sn->stats[size_bin][rix0].average_tx_time * ssc->smoothing_rate) + 772 (tt * (100 - ssc->smoothing_rate))) / 100; 773 } 774 775 /* 776 * XXX Don't mark the higher bit rates as also having failed; as this 777 * unfortunately stops those rates from being tasted when trying to 778 * TX. This happens with 11n aggregation. 779 */ 780 if (nframes == nbad) { 781 #if 0 782 int y; 783 #endif 784 sn->stats[size_bin][rix0].successive_failures += nbad; 785 #if 0 786 for (y = size_bin+1; y < NUM_PACKET_SIZE_BINS; y++) { 787 /* 788 * Also say larger packets failed since we 789 * assume if a small packet fails at a 790 * bit-rate then a larger one will also. 791 */ 792 sn->stats[y][rix0].successive_failures += nbad; 793 sn->stats[y][rix0].last_tx = ticks; 794 sn->stats[y][rix0].tries += tries; 795 sn->stats[y][rix0].total_packets += nframes; 796 } 797 #endif 798 } else { 799 sn->stats[size_bin][rix0].packets_acked += (nframes - nbad); 800 sn->stats[size_bin][rix0].successive_failures = 0; 801 } 802 sn->stats[size_bin][rix0].tries += tries; 803 sn->stats[size_bin][rix0].last_tx = ticks; 804 sn->stats[size_bin][rix0].total_packets += nframes; 805 806 /* update EWMA for this rix */ 807 808 /* Calculate percentage based on current rate */ 809 if (nframes == 0) 810 nframes = nbad = 1; 811 pct = ((nframes - nbad) * 1000) / nframes; 812 813 if (sn->stats[size_bin][rix0].total_packets < 814 ssc->smoothing_minpackets) { 815 /* just average the first few packets */ 816 int a_pct = (sn->stats[size_bin][rix0].packets_acked * 1000) / 817 (sn->stats[size_bin][rix0].total_packets); 818 sn->stats[size_bin][rix0].ewma_pct = a_pct; 819 } else { 820 /* use a ewma */ 821 sn->stats[size_bin][rix0].ewma_pct = 822 ((sn->stats[size_bin][rix0].ewma_pct * ssc->smoothing_rate) + 823 (pct * (100 - ssc->smoothing_rate))) / 100; 824 } 825 826 827 if (rix0 == sn->current_sample_rix[size_bin]) { 828 IEEE80211_NOTE(an->an_node.ni_vap, IEEE80211_MSG_RATECTL, 829 &an->an_node, 830 "%s: size %d %s sample rate %d %s tries (%d/%d) tt %d avg_tt (%d/%d) nfrm %d nbad %d", 831 __func__, 832 size, 833 status ? "FAIL" : "OK", 834 dot11rate(rt, rix0), 835 dot11rate_label(rt, rix0), 836 short_tries, tries, tt, 837 sn->stats[size_bin][rix0].average_tx_time, 838 sn->stats[size_bin][rix0].perfect_tx_time, 839 nframes, nbad); 840 sn->sample_tt[size_bin] = tt; 841 sn->current_sample_rix[size_bin] = -1; 842 } 843 } 844 845 static void 846 badrate(struct ifnet *ifp, int series, int hwrate, int tries, int status) 847 { 848 if_printf(ifp, "bad series%d hwrate 0x%x, tries %u ts_status 0x%x\n", 849 series, hwrate, tries, status); 850 } 851 852 void 853 ath_rate_tx_complete(struct ath_softc *sc, struct ath_node *an, 854 const struct ath_rc_series *rc, const struct ath_tx_status *ts, 855 int frame_size, int nframes, int nbad) 856 { 857 struct ifnet *ifp = sc->sc_ifp; 858 struct ieee80211com *ic = ifp->if_l2com; 859 struct sample_node *sn = ATH_NODE_SAMPLE(an); 860 int final_rix, short_tries, long_tries; 861 const HAL_RATE_TABLE *rt = sc->sc_currates; 862 int status = ts->ts_status; 863 int mrr; 864 865 final_rix = rt->rateCodeToIndex[ts->ts_rate]; 866 short_tries = ts->ts_shortretry; 867 long_tries = ts->ts_longretry + 1; 868 869 if (nframes == 0) { 870 device_printf(sc->sc_dev, "%s: nframes=0?\n", __func__); 871 return; 872 } 873 874 if (frame_size == 0) /* NB: should not happen */ 875 frame_size = 1500; 876 877 if (sn->ratemask == 0) { 878 IEEE80211_NOTE(an->an_node.ni_vap, IEEE80211_MSG_RATECTL, 879 &an->an_node, 880 "%s: size %d %s rate/try %d/%d no rates yet", 881 __func__, 882 bin_to_size(size_to_bin(frame_size)), 883 status ? "FAIL" : "OK", 884 short_tries, long_tries); 885 return; 886 } 887 mrr = sc->sc_mrretry; 888 /* XXX check HT protmode too */ 889 if (mrr && (ic->ic_flags & IEEE80211_F_USEPROT && !sc->sc_mrrprot)) 890 mrr = 0; 891 892 if (!mrr || ts->ts_finaltsi == 0) { 893 if (!IS_RATE_DEFINED(sn, final_rix)) { 894 device_printf(sc->sc_dev, "%s: ts_rate=%d ts_finaltsi=%d\n", 895 __func__, ts->ts_rate, ts->ts_finaltsi); 896 badrate(ifp, 0, ts->ts_rate, long_tries, status); 897 return; 898 } 899 /* 900 * Only one rate was used; optimize work. 901 */ 902 IEEE80211_NOTE(an->an_node.ni_vap, IEEE80211_MSG_RATECTL, 903 &an->an_node, "%s: size %d (%d bytes) %s rate/short/long %d %s/%d/%d nframes/nbad [%d/%d]", 904 __func__, 905 bin_to_size(size_to_bin(frame_size)), 906 frame_size, 907 status ? "FAIL" : "OK", 908 dot11rate(rt, final_rix), dot11rate_label(rt, final_rix), 909 short_tries, long_tries, nframes, nbad); 910 update_stats(sc, an, frame_size, 911 final_rix, long_tries, 912 0, 0, 913 0, 0, 914 0, 0, 915 short_tries, long_tries, status, 916 nframes, nbad); 917 918 } else { 919 int finalTSIdx = ts->ts_finaltsi; 920 int i; 921 922 /* 923 * Process intermediate rates that failed. 924 */ 925 926 IEEE80211_NOTE(an->an_node.ni_vap, IEEE80211_MSG_RATECTL, 927 &an->an_node, 928 "%s: size %d (%d bytes) finaltsidx %d short %d long %d %s rate/try [%d %s/%d %d %s/%d %d %s/%d %d %s/%d] nframes/nbad [%d/%d]", 929 __func__, 930 bin_to_size(size_to_bin(frame_size)), 931 frame_size, 932 finalTSIdx, 933 short_tries, 934 long_tries, 935 status ? "FAIL" : "OK", 936 dot11rate(rt, rc[0].rix), 937 dot11rate_label(rt, rc[0].rix), rc[0].tries, 938 dot11rate(rt, rc[1].rix), 939 dot11rate_label(rt, rc[1].rix), rc[1].tries, 940 dot11rate(rt, rc[2].rix), 941 dot11rate_label(rt, rc[2].rix), rc[2].tries, 942 dot11rate(rt, rc[3].rix), 943 dot11rate_label(rt, rc[3].rix), rc[3].tries, 944 nframes, nbad); 945 946 for (i = 0; i < 4; i++) { 947 if (rc[i].tries && !IS_RATE_DEFINED(sn, rc[i].rix)) 948 badrate(ifp, 0, rc[i].ratecode, rc[i].tries, 949 status); 950 } 951 952 /* 953 * NB: series > 0 are not penalized for failure 954 * based on the try counts under the assumption 955 * that losses are often bursty and since we 956 * sample higher rates 1 try at a time doing so 957 * may unfairly penalize them. 958 */ 959 if (rc[0].tries) { 960 update_stats(sc, an, frame_size, 961 rc[0].rix, rc[0].tries, 962 rc[1].rix, rc[1].tries, 963 rc[2].rix, rc[2].tries, 964 rc[3].rix, rc[3].tries, 965 short_tries, long_tries, 966 long_tries > rc[0].tries, 967 nframes, nbad); 968 long_tries -= rc[0].tries; 969 } 970 971 if (rc[1].tries && finalTSIdx > 0) { 972 update_stats(sc, an, frame_size, 973 rc[1].rix, rc[1].tries, 974 rc[2].rix, rc[2].tries, 975 rc[3].rix, rc[3].tries, 976 0, 0, 977 short_tries, long_tries, 978 status, 979 nframes, nbad); 980 long_tries -= rc[1].tries; 981 } 982 983 if (rc[2].tries && finalTSIdx > 1) { 984 update_stats(sc, an, frame_size, 985 rc[2].rix, rc[2].tries, 986 rc[3].rix, rc[3].tries, 987 0, 0, 988 0, 0, 989 short_tries, long_tries, 990 status, 991 nframes, nbad); 992 long_tries -= rc[2].tries; 993 } 994 995 if (rc[3].tries && finalTSIdx > 2) { 996 update_stats(sc, an, frame_size, 997 rc[3].rix, rc[3].tries, 998 0, 0, 999 0, 0, 1000 0, 0, 1001 short_tries, long_tries, 1002 status, 1003 nframes, nbad); 1004 } 1005 } 1006 } 1007 1008 void 1009 ath_rate_newassoc(struct ath_softc *sc, struct ath_node *an, int isnew) 1010 { 1011 if (isnew) 1012 ath_rate_ctl_reset(sc, &an->an_node); 1013 } 1014 1015 static const struct txschedule *mrr_schedules[IEEE80211_MODE_MAX+2] = { 1016 NULL, /* IEEE80211_MODE_AUTO */ 1017 series_11a, /* IEEE80211_MODE_11A */ 1018 series_11g, /* IEEE80211_MODE_11B */ 1019 series_11g, /* IEEE80211_MODE_11G */ 1020 NULL, /* IEEE80211_MODE_FH */ 1021 series_11a, /* IEEE80211_MODE_TURBO_A */ 1022 series_11g, /* IEEE80211_MODE_TURBO_G */ 1023 series_11a, /* IEEE80211_MODE_STURBO_A */ 1024 series_11na, /* IEEE80211_MODE_11NA */ 1025 series_11ng, /* IEEE80211_MODE_11NG */ 1026 series_half, /* IEEE80211_MODE_HALF */ 1027 series_quarter, /* IEEE80211_MODE_QUARTER */ 1028 }; 1029 1030 /* 1031 * Initialize the tables for a node. 1032 */ 1033 static void 1034 ath_rate_ctl_reset(struct ath_softc *sc, struct ieee80211_node *ni) 1035 { 1036 #define RATE(_ix) (ni->ni_rates.rs_rates[(_ix)] & IEEE80211_RATE_VAL) 1037 #define DOT11RATE(_ix) (rt->info[(_ix)].dot11Rate & IEEE80211_RATE_VAL) 1038 #define MCS(_ix) (ni->ni_htrates.rs_rates[_ix] | IEEE80211_RATE_MCS) 1039 struct ath_node *an = ATH_NODE(ni); 1040 struct sample_node *sn = ATH_NODE_SAMPLE(an); 1041 const HAL_RATE_TABLE *rt = sc->sc_currates; 1042 int x, y, rix; 1043 1044 KASSERT(rt != NULL, ("no rate table, mode %u", sc->sc_curmode)); 1045 1046 KASSERT(sc->sc_curmode < IEEE80211_MODE_MAX+2, 1047 ("curmode %u", sc->sc_curmode)); 1048 1049 sn->sched = mrr_schedules[sc->sc_curmode]; 1050 KASSERT(sn->sched != NULL, 1051 ("no mrr schedule for mode %u", sc->sc_curmode)); 1052 1053 sn->static_rix = -1; 1054 ath_rate_update_static_rix(sc, ni); 1055 1056 sn->currates = sc->sc_currates; 1057 1058 /* 1059 * Construct a bitmask of usable rates. This has all 1060 * negotiated rates minus those marked by the hal as 1061 * to be ignored for doing rate control. 1062 */ 1063 sn->ratemask = 0; 1064 /* MCS rates */ 1065 if (ni->ni_flags & IEEE80211_NODE_HT) { 1066 for (x = 0; x < ni->ni_htrates.rs_nrates; x++) { 1067 rix = sc->sc_rixmap[MCS(x)]; 1068 if (rix == 0xff) 1069 continue; 1070 /* skip rates marked broken by hal */ 1071 if (!rt->info[rix].valid) 1072 continue; 1073 KASSERT(rix < SAMPLE_MAXRATES, 1074 ("mcs %u has rix %d", MCS(x), rix)); 1075 sn->ratemask |= (uint64_t) 1<<rix; 1076 } 1077 } 1078 1079 /* Legacy rates */ 1080 for (x = 0; x < ni->ni_rates.rs_nrates; x++) { 1081 rix = sc->sc_rixmap[RATE(x)]; 1082 if (rix == 0xff) 1083 continue; 1084 /* skip rates marked broken by hal */ 1085 if (!rt->info[rix].valid) 1086 continue; 1087 KASSERT(rix < SAMPLE_MAXRATES, 1088 ("rate %u has rix %d", RATE(x), rix)); 1089 sn->ratemask |= (uint64_t) 1<<rix; 1090 } 1091 #ifdef IEEE80211_DEBUG 1092 if (ieee80211_msg(ni->ni_vap, IEEE80211_MSG_RATECTL)) { 1093 uint64_t mask; 1094 1095 ieee80211_note(ni->ni_vap, "[%6D] %s: size 1600 rate/tt", 1096 ni->ni_macaddr, ":", __func__); 1097 for (mask = sn->ratemask, rix = 0; mask != 0; mask >>= 1, rix++) { 1098 if ((mask & 1) == 0) 1099 continue; 1100 printf(" %d %s/%d", dot11rate(rt, rix), dot11rate_label(rt, rix), 1101 calc_usecs_unicast_packet(sc, 1600, rix, 0,0, 1102 (ni->ni_chw == 40))); 1103 } 1104 printf("\n"); 1105 } 1106 #endif 1107 for (y = 0; y < NUM_PACKET_SIZE_BINS; y++) { 1108 int size = bin_to_size(y); 1109 uint64_t mask; 1110 1111 sn->packets_sent[y] = 0; 1112 sn->current_sample_rix[y] = -1; 1113 sn->last_sample_rix[y] = 0; 1114 /* XXX start with first valid rate */ 1115 sn->current_rix[y] = ffs(sn->ratemask)-1; 1116 1117 /* 1118 * Initialize the statistics buckets; these are 1119 * indexed by the rate code index. 1120 */ 1121 for (rix = 0, mask = sn->ratemask; mask != 0; rix++, mask >>= 1) { 1122 if ((mask & 1) == 0) /* not a valid rate */ 1123 continue; 1124 sn->stats[y][rix].successive_failures = 0; 1125 sn->stats[y][rix].tries = 0; 1126 sn->stats[y][rix].total_packets = 0; 1127 sn->stats[y][rix].packets_acked = 0; 1128 sn->stats[y][rix].last_tx = 0; 1129 sn->stats[y][rix].ewma_pct = 0; 1130 1131 sn->stats[y][rix].perfect_tx_time = 1132 calc_usecs_unicast_packet(sc, size, rix, 0, 0, 1133 (ni->ni_chw == 40)); 1134 sn->stats[y][rix].average_tx_time = 1135 sn->stats[y][rix].perfect_tx_time; 1136 } 1137 } 1138 #if 0 1139 /* XXX 0, num_rates-1 are wrong */ 1140 IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_RATECTL, ni, 1141 "%s: %d rates %d%sMbps (%dus)- %d%sMbps (%dus)", __func__, 1142 sn->num_rates, 1143 DOT11RATE(0)/2, DOT11RATE(0) % 1 ? ".5" : "", 1144 sn->stats[1][0].perfect_tx_time, 1145 DOT11RATE(sn->num_rates-1)/2, DOT11RATE(sn->num_rates-1) % 1 ? ".5" : "", 1146 sn->stats[1][sn->num_rates-1].perfect_tx_time 1147 ); 1148 #endif 1149 /* set the visible bit-rate */ 1150 if (sn->static_rix != -1) 1151 ni->ni_txrate = DOT11RATE(sn->static_rix); 1152 else 1153 ni->ni_txrate = RATE(0); 1154 #undef RATE 1155 #undef DOT11RATE 1156 } 1157 1158 /* 1159 * Fetch the statistics for the given node. 1160 * 1161 * The ieee80211 node must be referenced and unlocked, however the ath_node 1162 * must be locked. 1163 * 1164 * The main difference here is that we convert the rate indexes 1165 * to 802.11 rates, or the userland output won't make much sense 1166 * as it has no access to the rix table. 1167 */ 1168 int 1169 ath_rate_fetch_node_stats(struct ath_softc *sc, struct ath_node *an, 1170 struct ath_rateioctl *rs) 1171 { 1172 struct sample_node *sn = ATH_NODE_SAMPLE(an); 1173 const HAL_RATE_TABLE *rt = sc->sc_currates; 1174 struct ath_rateioctl_tlv av; 1175 struct ath_rateioctl_rt *tv; 1176 int y; 1177 int o = 0; 1178 1179 ATH_NODE_LOCK_ASSERT(an); 1180 1181 /* 1182 * Ensure there's enough space for the statistics. 1183 */ 1184 if (rs->len < 1185 sizeof(struct ath_rateioctl_tlv) + 1186 sizeof(struct ath_rateioctl_rt) + 1187 sizeof(struct ath_rateioctl_tlv) + 1188 sizeof(struct sample_node)) { 1189 device_printf(sc->sc_dev, "%s: len=%d, too short\n", 1190 __func__, 1191 rs->len); 1192 return (EINVAL); 1193 } 1194 1195 /* 1196 * Take a temporary copy of the sample node state so we can 1197 * modify it before we copy it. 1198 */ 1199 tv = malloc(sizeof(struct ath_rateioctl_rt), M_TEMP, 1200 M_NOWAIT | M_ZERO); 1201 if (tv == NULL) { 1202 return (ENOMEM); 1203 } 1204 1205 /* 1206 * Populate the rate table mapping TLV. 1207 */ 1208 tv->nentries = rt->rateCount; 1209 for (y = 0; y < rt->rateCount; y++) { 1210 tv->ratecode[y] = rt->info[y].dot11Rate & IEEE80211_RATE_VAL; 1211 if (rt->info[y].phy == IEEE80211_T_HT) 1212 tv->ratecode[y] |= IEEE80211_RATE_MCS; 1213 } 1214 1215 o = 0; 1216 /* 1217 * First TLV - rate code mapping 1218 */ 1219 av.tlv_id = ATH_RATE_TLV_RATETABLE; 1220 av.tlv_len = sizeof(struct ath_rateioctl_rt); 1221 copyout(&av, rs->buf + o, sizeof(struct ath_rateioctl_tlv)); 1222 o += sizeof(struct ath_rateioctl_tlv); 1223 copyout(tv, rs->buf + o, sizeof(struct ath_rateioctl_rt)); 1224 o += sizeof(struct ath_rateioctl_rt); 1225 1226 /* 1227 * Second TLV - sample node statistics 1228 */ 1229 av.tlv_id = ATH_RATE_TLV_SAMPLENODE; 1230 av.tlv_len = sizeof(struct sample_node); 1231 copyout(&av, rs->buf + o, sizeof(struct ath_rateioctl_tlv)); 1232 o += sizeof(struct ath_rateioctl_tlv); 1233 1234 /* 1235 * Copy the statistics over to the provided buffer. 1236 */ 1237 copyout(sn, rs->buf + o, sizeof(struct sample_node)); 1238 o += sizeof(struct sample_node); 1239 1240 free(tv, M_TEMP); 1241 1242 return (0); 1243 } 1244 1245 static void 1246 sample_stats(void *arg, struct ieee80211_node *ni) 1247 { 1248 struct ath_softc *sc = arg; 1249 const HAL_RATE_TABLE *rt = sc->sc_currates; 1250 struct sample_node *sn = ATH_NODE_SAMPLE(ATH_NODE(ni)); 1251 uint64_t mask; 1252 int rix, y; 1253 1254 printf("\n[%s] refcnt %d static_rix (%d %s) ratemask 0x%jx\n", 1255 ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni), 1256 dot11rate(rt, sn->static_rix), 1257 dot11rate_label(rt, sn->static_rix), 1258 (uintmax_t)sn->ratemask); 1259 for (y = 0; y < NUM_PACKET_SIZE_BINS; y++) { 1260 printf("[%4u] cur rix %d (%d %s) since switch: packets %d ticks %u\n", 1261 bin_to_size(y), sn->current_rix[y], 1262 dot11rate(rt, sn->current_rix[y]), 1263 dot11rate_label(rt, sn->current_rix[y]), 1264 sn->packets_since_switch[y], sn->ticks_since_switch[y]); 1265 printf("[%4u] last sample (%d %s) cur sample (%d %s) packets sent %d\n", 1266 bin_to_size(y), 1267 dot11rate(rt, sn->last_sample_rix[y]), 1268 dot11rate_label(rt, sn->last_sample_rix[y]), 1269 dot11rate(rt, sn->current_sample_rix[y]), 1270 dot11rate_label(rt, sn->current_sample_rix[y]), 1271 sn->packets_sent[y]); 1272 printf("[%4u] packets since sample %d sample tt %u\n", 1273 bin_to_size(y), sn->packets_since_sample[y], 1274 sn->sample_tt[y]); 1275 } 1276 for (mask = sn->ratemask, rix = 0; mask != 0; mask >>= 1, rix++) { 1277 if ((mask & 1) == 0) 1278 continue; 1279 for (y = 0; y < NUM_PACKET_SIZE_BINS; y++) { 1280 if (sn->stats[y][rix].total_packets == 0) 1281 continue; 1282 printf("[%2u %s:%4u] %8ju:%-8ju (%3d%%) (EWMA %3d.%1d%%) T %8ju F %4d avg %5u last %u\n", 1283 dot11rate(rt, rix), dot11rate_label(rt, rix), 1284 bin_to_size(y), 1285 (uintmax_t) sn->stats[y][rix].total_packets, 1286 (uintmax_t) sn->stats[y][rix].packets_acked, 1287 (int) ((sn->stats[y][rix].packets_acked * 100ULL) / 1288 sn->stats[y][rix].total_packets), 1289 sn->stats[y][rix].ewma_pct / 10, 1290 sn->stats[y][rix].ewma_pct % 10, 1291 (uintmax_t) sn->stats[y][rix].tries, 1292 sn->stats[y][rix].successive_failures, 1293 sn->stats[y][rix].average_tx_time, 1294 ticks - sn->stats[y][rix].last_tx); 1295 } 1296 } 1297 } 1298 1299 static int 1300 ath_rate_sysctl_stats(SYSCTL_HANDLER_ARGS) 1301 { 1302 struct ath_softc *sc = arg1; 1303 struct ifnet *ifp = sc->sc_ifp; 1304 struct ieee80211com *ic = ifp->if_l2com; 1305 int error, v; 1306 1307 v = 0; 1308 error = sysctl_handle_int(oidp, &v, 0, req); 1309 if (error || !req->newptr) 1310 return error; 1311 ieee80211_iterate_nodes(&ic->ic_sta, sample_stats, sc); 1312 return 0; 1313 } 1314 1315 static int 1316 ath_rate_sysctl_smoothing_rate(SYSCTL_HANDLER_ARGS) 1317 { 1318 struct sample_softc *ssc = arg1; 1319 int rate, error; 1320 1321 rate = ssc->smoothing_rate; 1322 error = sysctl_handle_int(oidp, &rate, 0, req); 1323 if (error || !req->newptr) 1324 return error; 1325 if (!(0 <= rate && rate < 100)) 1326 return EINVAL; 1327 ssc->smoothing_rate = rate; 1328 ssc->smoothing_minpackets = 100 / (100 - rate); 1329 return 0; 1330 } 1331 1332 static int 1333 ath_rate_sysctl_sample_rate(SYSCTL_HANDLER_ARGS) 1334 { 1335 struct sample_softc *ssc = arg1; 1336 int rate, error; 1337 1338 rate = ssc->sample_rate; 1339 error = sysctl_handle_int(oidp, &rate, 0, req); 1340 if (error || !req->newptr) 1341 return error; 1342 if (!(2 <= rate && rate <= 100)) 1343 return EINVAL; 1344 ssc->sample_rate = rate; 1345 return 0; 1346 } 1347 1348 static void 1349 ath_rate_sysctlattach(struct ath_softc *sc, struct sample_softc *ssc) 1350 { 1351 struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(sc->sc_dev); 1352 struct sysctl_oid *tree = device_get_sysctl_tree(sc->sc_dev); 1353 1354 SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 1355 "smoothing_rate", CTLTYPE_INT | CTLFLAG_RW, ssc, 0, 1356 ath_rate_sysctl_smoothing_rate, "I", 1357 "sample: smoothing rate for avg tx time (%%)"); 1358 SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 1359 "sample_rate", CTLTYPE_INT | CTLFLAG_RW, ssc, 0, 1360 ath_rate_sysctl_sample_rate, "I", 1361 "sample: percent air time devoted to sampling new rates (%%)"); 1362 /* XXX max_successive_failures, stale_failure_timeout, min_switch */ 1363 SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 1364 "sample_stats", CTLTYPE_INT | CTLFLAG_RW, sc, 0, 1365 ath_rate_sysctl_stats, "I", "sample: print statistics"); 1366 } 1367 1368 struct ath_ratectrl * 1369 ath_rate_attach(struct ath_softc *sc) 1370 { 1371 struct sample_softc *ssc; 1372 1373 ssc = malloc(sizeof(struct sample_softc), M_DEVBUF, M_NOWAIT|M_ZERO); 1374 if (ssc == NULL) 1375 return NULL; 1376 ssc->arc.arc_space = sizeof(struct sample_node); 1377 ssc->smoothing_rate = 75; /* ewma percentage ([0..99]) */ 1378 ssc->smoothing_minpackets = 100 / (100 - ssc->smoothing_rate); 1379 ssc->sample_rate = 10; /* %time to try diff tx rates */ 1380 ssc->max_successive_failures = 3; /* threshold for rate sampling*/ 1381 ssc->stale_failure_timeout = 10 * hz; /* 10 seconds */ 1382 ssc->min_switch = hz; /* 1 second */ 1383 ath_rate_sysctlattach(sc, ssc); 1384 return &ssc->arc; 1385 } 1386 1387 void 1388 ath_rate_detach(struct ath_ratectrl *arc) 1389 { 1390 struct sample_softc *ssc = (struct sample_softc *) arc; 1391 1392 free(ssc, M_DEVBUF); 1393 } 1394