1 /*- 2 * SPDX-License-Identifier: BSD-3-Clause 3 * 4 * Copyright (c) 2005 John Bicket 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer, 12 * without modification. 13 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 14 * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any 15 * redistribution must be conditioned upon including a substantially 16 * similar Disclaimer requirement for further binary redistribution. 17 * 3. Neither the names of the above-listed copyright holders nor the names 18 * of any contributors may be used to endorse or promote products derived 19 * from this software without specific prior written permission. 20 * 21 * Alternatively, this software may be distributed under the terms of the 22 * GNU General Public License ("GPL") version 2 as published by the Free 23 * Software Foundation. 24 * 25 * NO WARRANTY 26 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 27 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 28 * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY 29 * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL 30 * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, 31 * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 32 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 33 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER 34 * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 35 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 36 * THE POSSIBILITY OF SUCH DAMAGES. 37 * 38 */ 39 40 #include <sys/cdefs.h> 41 /* 42 * John Bicket's SampleRate control algorithm. 43 */ 44 #include "opt_ath.h" 45 #include "opt_inet.h" 46 #include "opt_wlan.h" 47 #include "opt_ah.h" 48 49 #include <sys/param.h> 50 #include <sys/systm.h> 51 #include <sys/sysctl.h> 52 #include <sys/kernel.h> 53 #include <sys/lock.h> 54 #include <sys/malloc.h> 55 #include <sys/mutex.h> 56 #include <sys/errno.h> 57 58 #include <machine/bus.h> 59 #include <machine/resource.h> 60 #include <sys/bus.h> 61 62 #include <sys/socket.h> 63 64 #include <net/if.h> 65 #include <net/if_var.h> 66 #include <net/if_media.h> 67 #include <net/if_arp.h> 68 #include <net/ethernet.h> /* XXX for ether_sprintf */ 69 70 #include <net80211/ieee80211_var.h> 71 72 #include <net/bpf.h> 73 74 #ifdef INET 75 #include <netinet/in.h> 76 #include <netinet/if_ether.h> 77 #endif 78 79 #include <dev/ath/if_athvar.h> 80 #include <dev/ath/ath_rate/sample/sample.h> 81 #include <dev/ath/ath_hal/ah_desc.h> 82 #include <dev/ath/ath_rate/sample/tx_schedules.h> 83 84 /* 85 * This file is an implementation of the SampleRate algorithm 86 * in "Bit-rate Selection in Wireless Networks" 87 * (http://www.pdos.lcs.mit.edu/papers/jbicket-ms.ps) 88 * 89 * SampleRate chooses the bit-rate it predicts will provide the most 90 * throughput based on estimates of the expected per-packet 91 * transmission time for each bit-rate. SampleRate periodically sends 92 * packets at bit-rates other than the current one to estimate when 93 * another bit-rate will provide better performance. SampleRate 94 * switches to another bit-rate when its estimated per-packet 95 * transmission time becomes smaller than the current bit-rate's. 96 * SampleRate reduces the number of bit-rates it must sample by 97 * eliminating those that could not perform better than the one 98 * currently being used. SampleRate also stops probing at a bit-rate 99 * if it experiences several successive losses. 100 * 101 * The difference between the algorithm in the thesis and the one in this 102 * file is that the one in this file uses a ewma instead of a window. 103 * 104 * Also, this implementation tracks the average transmission time for 105 * a few different packet sizes independently for each link. 106 */ 107 108 /* XXX TODO: move this into ath_hal/net80211 so it can be shared */ 109 110 #define MCS_HT20 0 111 #define MCS_HT20_SGI 1 112 #define MCS_HT40 2 113 #define MCS_HT40_SGI 3 114 115 /* 116 * This is currently a copy/paste from the 11n tx code. 117 * 118 * It's used to determine the maximum frame length allowed for the 119 * given rate. For now this ignores SGI/LGI and will assume long-GI. 120 * This only matters for lower rates that can't fill a full 64k A-MPDU. 121 * 122 * (But it's also important because right now rate control doesn't set 123 * flags like SGI/LGI, STBC, LDPC, TX power, etc.) 124 * 125 * When selecting a set of rates the rate control code will iterate 126 * over the HT20/HT40 max frame length and tell the caller the maximum 127 * length (@ LGI.) It will also choose a bucket that's the minimum 128 * of this value and the provided aggregate length. That way the 129 * rate selection will closely match what the eventual formed aggregate 130 * will be rather than "not at all". 131 */ 132 133 static int ath_rate_sample_max_4ms_framelen[4][32] = { 134 [MCS_HT20] = { 135 3212, 6432, 9648, 12864, 19300, 25736, 28952, 32172, 136 6424, 12852, 19280, 25708, 38568, 51424, 57852, 64280, 137 9628, 19260, 28896, 38528, 57792, 65532, 65532, 65532, 138 12828, 25656, 38488, 51320, 65532, 65532, 65532, 65532, 139 }, 140 [MCS_HT20_SGI] = { 141 3572, 7144, 10720, 14296, 21444, 28596, 32172, 35744, 142 7140, 14284, 21428, 28568, 42856, 57144, 64288, 65532, 143 10700, 21408, 32112, 42816, 64228, 65532, 65532, 65532, 144 14256, 28516, 42780, 57040, 65532, 65532, 65532, 65532, 145 }, 146 [MCS_HT40] = { 147 6680, 13360, 20044, 26724, 40092, 53456, 60140, 65532, 148 13348, 26700, 40052, 53400, 65532, 65532, 65532, 65532, 149 20004, 40008, 60016, 65532, 65532, 65532, 65532, 65532, 150 26644, 53292, 65532, 65532, 65532, 65532, 65532, 65532, 151 }, 152 [MCS_HT40_SGI] = { 153 7420, 14844, 22272, 29696, 44544, 59396, 65532, 65532, 154 14832, 29668, 44504, 59340, 65532, 65532, 65532, 65532, 155 22232, 44464, 65532, 65532, 65532, 65532, 65532, 65532, 156 29616, 59232, 65532, 65532, 65532, 65532, 65532, 65532, 157 } 158 }; 159 160 /* 161 * Given the (potentially MRR) transmit schedule, calculate the maximum 162 * allowed packet size for forming aggregates based on the lowest 163 * MCS rate in the transmit schedule. 164 * 165 * Returns -1 if it's a legacy rate or no MRR. 166 * 167 * XXX TODO: this needs to be limited by the RTS/CTS AR5416 8KB bug limit! 168 * (by checking rts/cts flags and applying sc_rts_aggr_limit) 169 * 170 * XXX TODO: apply per-node max-ampdu size and driver ampdu size limits too. 171 */ 172 static int 173 ath_rate_sample_find_min_pktlength(struct ath_softc *sc, 174 struct ath_node *an, uint8_t rix0, int is_aggr) 175 { 176 #define MCS_IDX(ix) (rt->info[ix].dot11Rate) 177 const HAL_RATE_TABLE *rt = sc->sc_currates; 178 struct sample_node *sn = ATH_NODE_SAMPLE(an); 179 const struct txschedule *sched = &sn->sched[rix0]; 180 int max_pkt_length = 65530; // ATH_AGGR_MAXSIZE 181 // Note: this may not be true in all cases; need to check? 182 int is_ht40 = (an->an_node.ni_chw == 40); 183 // Note: not great, but good enough.. 184 int idx = is_ht40 ? MCS_HT40 : MCS_HT20; 185 186 if (rt->info[rix0].phy != IEEE80211_T_HT) { 187 return -1; 188 } 189 190 if (! sc->sc_mrretry) { 191 return -1; 192 } 193 194 KASSERT(rix0 == sched->r0, ("rix0 (%x) != sched->r0 (%x)!\n", 195 rix0, sched->r0)); 196 197 /* 198 * Update based on sched->r{0,1,2,3} if sched->t{0,1,2,3} 199 * is not zero. 200 * 201 * Note: assuming all four PHYs are HT! 202 * 203 * XXX TODO: right now I hardcode here and in getxtxrates() that 204 * rates 2 and 3 in the tx schedule are ignored. This is important 205 * for forming larger aggregates because right now (a) the tx schedule 206 * per rate is fixed, and (b) reliable packet transmission at those 207 * higher rates kinda needs a lower MCS rate in there somewhere. 208 * However, this means we can only form shorter aggregates. 209 * If we've negotiated aggregation then we can actually just 210 * rely on software retransmit rather than having things fall 211 * back to like MCS0/1 in hardware, and rate control will hopefully 212 * do the right thing. 213 * 214 * Once the whole rate schedule is passed into ath_rate_findrate(), 215 * the ath_rc_series is populated ,the fixed tx schedule stuff 216 * is removed AND getxtxrates() is removed then we can remove this 217 * check as it can just NOT populate t2/t3. It also means 218 * probing can actually use rix0 for probeing and rix1 for the 219 * current best rate.. 220 */ 221 if (sched->t0 != 0) { 222 max_pkt_length = MIN(max_pkt_length, 223 ath_rate_sample_max_4ms_framelen[idx][MCS_IDX(sched->r0)]); 224 } 225 if (sched->t1 != 0) { 226 max_pkt_length = MIN(max_pkt_length, 227 ath_rate_sample_max_4ms_framelen[idx][MCS_IDX(sched->r1)]); 228 } 229 if (sched->t2 != 0 && (! is_aggr)) { 230 max_pkt_length = MIN(max_pkt_length, 231 ath_rate_sample_max_4ms_framelen[idx][MCS_IDX(sched->r2)]); 232 } 233 if (sched->t3 != 0 && (! is_aggr)) { 234 max_pkt_length = MIN(max_pkt_length, 235 ath_rate_sample_max_4ms_framelen[idx][MCS_IDX(sched->r3)]); 236 } 237 238 return max_pkt_length; 239 #undef MCS 240 } 241 242 static void ath_rate_ctl_reset(struct ath_softc *, struct ieee80211_node *); 243 244 static __inline int 245 size_to_bin(int size) 246 { 247 #if NUM_PACKET_SIZE_BINS > 1 248 if (size <= packet_size_bins[0]) 249 return 0; 250 #endif 251 #if NUM_PACKET_SIZE_BINS > 2 252 if (size <= packet_size_bins[1]) 253 return 1; 254 #endif 255 #if NUM_PACKET_SIZE_BINS > 3 256 if (size <= packet_size_bins[2]) 257 return 2; 258 #endif 259 #if NUM_PACKET_SIZE_BINS > 4 260 if (size <= packet_size_bins[3]) 261 return 3; 262 #endif 263 #if NUM_PACKET_SIZE_BINS > 5 264 if (size <= packet_size_bins[4]) 265 return 4; 266 #endif 267 #if NUM_PACKET_SIZE_BINS > 6 268 if (size <= packet_size_bins[5]) 269 return 5; 270 #endif 271 #if NUM_PACKET_SIZE_BINS > 7 272 if (size <= packet_size_bins[6]) 273 return 6; 274 #endif 275 #if NUM_PACKET_SIZE_BINS > 8 276 #error "add support for more packet sizes" 277 #endif 278 return NUM_PACKET_SIZE_BINS-1; 279 } 280 281 void 282 ath_rate_node_init(struct ath_softc *sc, struct ath_node *an) 283 { 284 /* NB: assumed to be zero'd by caller */ 285 } 286 287 void 288 ath_rate_node_cleanup(struct ath_softc *sc, struct ath_node *an) 289 { 290 } 291 292 static int 293 dot11rate(const HAL_RATE_TABLE *rt, int rix) 294 { 295 if (rix < 0) 296 return -1; 297 return rt->info[rix].phy == IEEE80211_T_HT ? 298 rt->info[rix].dot11Rate : (rt->info[rix].dot11Rate & IEEE80211_RATE_VAL) / 2; 299 } 300 301 static const char * 302 dot11rate_label(const HAL_RATE_TABLE *rt, int rix) 303 { 304 if (rix < 0) 305 return ""; 306 return rt->info[rix].phy == IEEE80211_T_HT ? "MCS" : "Mb "; 307 } 308 309 /* 310 * Return the rix with the lowest average_tx_time, 311 * or -1 if all the average_tx_times are 0. 312 */ 313 static __inline int 314 pick_best_rate(struct ath_node *an, const HAL_RATE_TABLE *rt, 315 int size_bin, int require_acked_before) 316 { 317 struct sample_node *sn = ATH_NODE_SAMPLE(an); 318 int best_rate_rix, best_rate_tt, best_rate_pct; 319 uint64_t mask; 320 int rix, tt, pct; 321 322 best_rate_rix = 0; 323 best_rate_tt = 0; 324 best_rate_pct = 0; 325 for (mask = sn->ratemask, rix = 0; mask != 0; mask >>= 1, rix++) { 326 if ((mask & 1) == 0) /* not a supported rate */ 327 continue; 328 329 /* Don't pick a non-HT rate for a HT node */ 330 if ((an->an_node.ni_flags & IEEE80211_NODE_HT) && 331 (rt->info[rix].phy != IEEE80211_T_HT)) { 332 continue; 333 } 334 335 tt = sn->stats[size_bin][rix].average_tx_time; 336 if (tt <= 0 || 337 (require_acked_before && 338 !sn->stats[size_bin][rix].packets_acked)) 339 continue; 340 341 /* Calculate percentage if possible */ 342 if (sn->stats[size_bin][rix].total_packets > 0) { 343 pct = sn->stats[size_bin][rix].ewma_pct; 344 } else { 345 pct = -1; /* No percent yet to compare against! */ 346 } 347 348 /* don't use a bit-rate that has been failing */ 349 if (sn->stats[size_bin][rix].successive_failures > 3) 350 continue; 351 352 /* 353 * For HT, Don't use a bit rate that is more 354 * lossy than the best. Give a bit of leeway. 355 * 356 * Don't consider best rates that we haven't seen 357 * packets for yet; let sampling start inflence that. 358 */ 359 if (an->an_node.ni_flags & IEEE80211_NODE_HT) { 360 if (pct == -1) 361 continue; 362 #if 0 363 IEEE80211_NOTE(an->an_node.ni_vap, 364 IEEE80211_MSG_RATECTL, 365 &an->an_node, 366 "%s: size %d comparing best rate 0x%x pkts/ewma/tt (%ju/%d/%d) " 367 "to 0x%x pkts/ewma/tt (%ju/%d/%d)", 368 __func__, 369 bin_to_size(size_bin), 370 rt->info[best_rate_rix].dot11Rate, 371 sn->stats[size_bin][best_rate_rix].total_packets, 372 best_rate_pct, 373 best_rate_tt, 374 rt->info[rix].dot11Rate, 375 sn->stats[size_bin][rix].total_packets, 376 pct, 377 tt); 378 #endif 379 if (best_rate_pct > (pct + 50)) 380 continue; 381 } 382 /* 383 * For non-MCS rates, use the current average txtime for 384 * comparison. 385 */ 386 if (! (an->an_node.ni_flags & IEEE80211_NODE_HT)) { 387 if (best_rate_tt == 0 || tt <= best_rate_tt) { 388 best_rate_tt = tt; 389 best_rate_rix = rix; 390 best_rate_pct = pct; 391 } 392 } 393 394 /* 395 * Since 2 and 3 stream rates have slightly higher TX times, 396 * allow a little bit of leeway. This should later 397 * be abstracted out and properly handled. 398 */ 399 if (an->an_node.ni_flags & IEEE80211_NODE_HT) { 400 if (best_rate_tt == 0 || ((tt * 10) <= (best_rate_tt * 10))) { 401 best_rate_tt = tt; 402 best_rate_rix = rix; 403 best_rate_pct = pct; 404 } 405 } 406 } 407 return (best_rate_tt ? best_rate_rix : -1); 408 } 409 410 /* 411 * Pick a good "random" bit-rate to sample other than the current one. 412 */ 413 static __inline int 414 pick_sample_rate(struct sample_softc *ssc , struct ath_node *an, 415 const HAL_RATE_TABLE *rt, int size_bin) 416 { 417 #define DOT11RATE(ix) (rt->info[ix].dot11Rate & IEEE80211_RATE_VAL) 418 #define MCS(ix) (rt->info[ix].dot11Rate | IEEE80211_RATE_MCS) 419 struct sample_node *sn = ATH_NODE_SAMPLE(an); 420 int current_rix, rix; 421 unsigned current_tt; 422 uint64_t mask; 423 424 current_rix = sn->current_rix[size_bin]; 425 if (current_rix < 0) { 426 /* no successes yet, send at the lowest bit-rate */ 427 /* XXX TODO should return MCS0 if HT */ 428 return 0; 429 } 430 431 current_tt = sn->stats[size_bin][current_rix].average_tx_time; 432 433 rix = sn->last_sample_rix[size_bin]+1; /* next sample rate */ 434 mask = sn->ratemask &~ ((uint64_t) 1<<current_rix);/* don't sample current rate */ 435 while (mask != 0) { 436 if ((mask & ((uint64_t) 1<<rix)) == 0) { /* not a supported rate */ 437 nextrate: 438 if (++rix >= rt->rateCount) 439 rix = 0; 440 continue; 441 } 442 443 /* 444 * The following code stops trying to sample 445 * non-MCS rates when speaking to an MCS node. 446 * However, at least for CCK rates in 2.4GHz mode, 447 * the non-MCS rates MAY actually provide better 448 * PER at the very far edge of reception. 449 * 450 * However! Until ath_rate_form_aggr() grows 451 * some logic to not form aggregates if the 452 * selected rate is non-MCS, this won't work. 453 * 454 * So don't disable this code until you've taught 455 * ath_rate_form_aggr() to drop out if any of 456 * the selected rates are non-MCS. 457 */ 458 #if 1 459 /* if the node is HT and the rate isn't HT, don't bother sample */ 460 if ((an->an_node.ni_flags & IEEE80211_NODE_HT) && 461 (rt->info[rix].phy != IEEE80211_T_HT)) { 462 mask &= ~((uint64_t) 1<<rix); 463 goto nextrate; 464 } 465 #endif 466 467 /* this bit-rate is always worse than the current one */ 468 if (sn->stats[size_bin][rix].perfect_tx_time > current_tt) { 469 mask &= ~((uint64_t) 1<<rix); 470 goto nextrate; 471 } 472 473 /* rarely sample bit-rates that fail a lot */ 474 if (sn->stats[size_bin][rix].successive_failures > ssc->max_successive_failures && 475 ticks - sn->stats[size_bin][rix].last_tx < ssc->stale_failure_timeout) { 476 mask &= ~((uint64_t) 1<<rix); 477 goto nextrate; 478 } 479 480 /* 481 * For HT, only sample a few rates on either side of the 482 * current rix; there's quite likely a lot of them. 483 * 484 * This is limited to testing rate indexes on either side of 485 * this MCS, but for all spatial streams. 486 * 487 * Otherwise we'll (a) never really sample higher MCS 488 * rates if we're stuck low, and we'll make weird moves 489 * like sample MCS8 if we're using MCS7. 490 */ 491 if (an->an_node.ni_flags & IEEE80211_NODE_HT) { 492 uint8_t current_mcs, rix_mcs; 493 494 current_mcs = MCS(current_rix) & 0x7; 495 rix_mcs = MCS(rix) & 0x7; 496 497 if (rix_mcs < (current_mcs - 2) || 498 rix_mcs > (current_mcs + 2)) { 499 mask &= ~((uint64_t) 1<<rix); 500 goto nextrate; 501 } 502 } 503 504 /* Don't sample more than 2 rates higher for rates > 11M for non-HT rates */ 505 if (! (an->an_node.ni_flags & IEEE80211_NODE_HT)) { 506 if (DOT11RATE(rix) > 2*11 && rix > current_rix + 2) { 507 mask &= ~((uint64_t) 1<<rix); 508 goto nextrate; 509 } 510 } 511 512 sn->last_sample_rix[size_bin] = rix; 513 return rix; 514 } 515 return current_rix; 516 #undef DOT11RATE 517 #undef MCS 518 } 519 520 static int 521 ath_rate_get_static_rix(struct ath_softc *sc, const struct ieee80211_node *ni) 522 { 523 #define RATE(_ix) (ni->ni_rates.rs_rates[(_ix)] & IEEE80211_RATE_VAL) 524 #define DOT11RATE(_ix) (rt->info[(_ix)].dot11Rate & IEEE80211_RATE_VAL) 525 #define MCS(_ix) (ni->ni_htrates.rs_rates[_ix] | IEEE80211_RATE_MCS) 526 const struct ieee80211_txparam *tp = ni->ni_txparms; 527 int srate; 528 529 /* Check MCS rates */ 530 for (srate = ni->ni_htrates.rs_nrates - 1; srate >= 0; srate--) { 531 if (MCS(srate) == tp->ucastrate) 532 return sc->sc_rixmap[tp->ucastrate]; 533 } 534 535 /* Check legacy rates */ 536 for (srate = ni->ni_rates.rs_nrates - 1; srate >= 0; srate--) { 537 if (RATE(srate) == tp->ucastrate) 538 return sc->sc_rixmap[tp->ucastrate]; 539 } 540 return -1; 541 #undef RATE 542 #undef DOT11RATE 543 #undef MCS 544 } 545 546 static void 547 ath_rate_update_static_rix(struct ath_softc *sc, struct ieee80211_node *ni) 548 { 549 struct ath_node *an = ATH_NODE(ni); 550 const struct ieee80211_txparam *tp = ni->ni_txparms; 551 struct sample_node *sn = ATH_NODE_SAMPLE(an); 552 553 if (tp != NULL && tp->ucastrate != IEEE80211_FIXED_RATE_NONE) { 554 /* 555 * A fixed rate is to be used; ucastrate is the IEEE code 556 * for this rate (sans basic bit). Check this against the 557 * negotiated rate set for the node. Note the fixed rate 558 * may not be available for various reasons so we only 559 * setup the static rate index if the lookup is successful. 560 */ 561 sn->static_rix = ath_rate_get_static_rix(sc, ni); 562 } else { 563 sn->static_rix = -1; 564 } 565 } 566 567 /* 568 * Pick a non-HT rate to begin using. 569 */ 570 static int 571 ath_rate_pick_seed_rate_legacy(struct ath_softc *sc, struct ath_node *an, 572 int frameLen) 573 { 574 #define DOT11RATE(ix) (rt->info[ix].dot11Rate & IEEE80211_RATE_VAL) 575 #define MCS(ix) (rt->info[ix].dot11Rate | IEEE80211_RATE_MCS) 576 #define RATE(ix) (DOT11RATE(ix) / 2) 577 int rix = -1; 578 const HAL_RATE_TABLE *rt = sc->sc_currates; 579 struct sample_node *sn = ATH_NODE_SAMPLE(an); 580 const int size_bin = size_to_bin(frameLen); 581 582 /* no packet has been sent successfully yet */ 583 for (rix = rt->rateCount-1; rix > 0; rix--) { 584 if ((sn->ratemask & ((uint64_t) 1<<rix)) == 0) 585 continue; 586 587 /* Skip HT rates */ 588 if (rt->info[rix].phy == IEEE80211_T_HT) 589 continue; 590 591 /* 592 * Pick the highest rate <= 36 Mbps 593 * that hasn't failed. 594 */ 595 if (DOT11RATE(rix) <= 72 && 596 sn->stats[size_bin][rix].successive_failures == 0) { 597 break; 598 } 599 } 600 return rix; 601 #undef RATE 602 #undef MCS 603 #undef DOT11RATE 604 } 605 606 /* 607 * Pick a HT rate to begin using. 608 * 609 * Don't use any non-HT rates; only consider HT rates. 610 */ 611 static int 612 ath_rate_pick_seed_rate_ht(struct ath_softc *sc, struct ath_node *an, 613 int frameLen) 614 { 615 #define DOT11RATE(ix) (rt->info[ix].dot11Rate & IEEE80211_RATE_VAL) 616 #define MCS(ix) (rt->info[ix].dot11Rate | IEEE80211_RATE_MCS) 617 #define RATE(ix) (DOT11RATE(ix) / 2) 618 int rix = -1, ht_rix = -1; 619 const HAL_RATE_TABLE *rt = sc->sc_currates; 620 struct sample_node *sn = ATH_NODE_SAMPLE(an); 621 const int size_bin = size_to_bin(frameLen); 622 623 /* no packet has been sent successfully yet */ 624 for (rix = rt->rateCount-1; rix > 0; rix--) { 625 /* Skip rates we can't use */ 626 if ((sn->ratemask & ((uint64_t) 1<<rix)) == 0) 627 continue; 628 629 /* Keep a copy of the last seen HT rate index */ 630 if (rt->info[rix].phy == IEEE80211_T_HT) 631 ht_rix = rix; 632 633 /* Skip non-HT rates */ 634 if (rt->info[rix].phy != IEEE80211_T_HT) 635 continue; 636 637 /* 638 * Pick a medium-speed rate at 1 spatial stream 639 * which has not seen any failures. 640 * Higher rates may fail; we'll try them later. 641 */ 642 if (((MCS(rix)& 0x7f) <= 4) && 643 sn->stats[size_bin][rix].successive_failures == 0) { 644 break; 645 } 646 } 647 648 /* 649 * If all the MCS rates have successive failures, rix should be 650 * > 0; otherwise use the lowest MCS rix (hopefully MCS 0.) 651 */ 652 return MAX(rix, ht_rix); 653 #undef RATE 654 #undef MCS 655 #undef DOT11RATE 656 } 657 658 void 659 ath_rate_findrate(struct ath_softc *sc, struct ath_node *an, 660 int shortPreamble, size_t frameLen, int tid, 661 int is_aggr, u_int8_t *rix0, int *try0, 662 u_int8_t *txrate, int *maxdur, int *maxpktlen) 663 { 664 #define DOT11RATE(ix) (rt->info[ix].dot11Rate & IEEE80211_RATE_VAL) 665 #define MCS(ix) (rt->info[ix].dot11Rate | IEEE80211_RATE_MCS) 666 #define RATE(ix) (DOT11RATE(ix) / 2) 667 struct sample_node *sn = ATH_NODE_SAMPLE(an); 668 struct sample_softc *ssc = ATH_SOFTC_SAMPLE(sc); 669 struct ieee80211com *ic = &sc->sc_ic; 670 const HAL_RATE_TABLE *rt = sc->sc_currates; 671 int size_bin = size_to_bin(frameLen); 672 int rix, mrr, best_rix, change_rates; 673 unsigned average_tx_time; 674 int max_pkt_len; 675 676 ath_rate_update_static_rix(sc, &an->an_node); 677 678 /* For now don't take TID, is_aggr into account */ 679 /* Also for now don't calculate a max duration; that'll come later */ 680 *maxdur = -1; 681 682 /* 683 * For now just set it to the frame length; we'll optimise it later. 684 */ 685 *maxpktlen = frameLen; 686 687 if (sn->currates != sc->sc_currates) { 688 device_printf(sc->sc_dev, "%s: currates != sc_currates!\n", 689 __func__); 690 rix = 0; 691 *try0 = ATH_TXMAXTRY; 692 goto done; 693 } 694 695 if (sn->static_rix != -1) { 696 rix = sn->static_rix; 697 *try0 = ATH_TXMAXTRY; 698 699 /* 700 * Ensure we limit max packet length here too! 701 */ 702 max_pkt_len = ath_rate_sample_find_min_pktlength(sc, an, 703 sn->static_rix, 704 is_aggr); 705 if (max_pkt_len > 0) { 706 *maxpktlen = frameLen = MIN(frameLen, max_pkt_len); 707 size_bin = size_to_bin(frameLen); 708 } 709 goto done; 710 } 711 712 mrr = sc->sc_mrretry; 713 /* XXX check HT protmode too */ 714 /* XXX turn into a cap; 11n MACs support MRR+RTSCTS */ 715 if (mrr && (ic->ic_flags & IEEE80211_F_USEPROT && !sc->sc_mrrprot)) 716 mrr = 0; 717 718 best_rix = pick_best_rate(an, rt, size_bin, !mrr); 719 720 /* 721 * At this point we've chosen the best rix, so now we 722 * need to potentially update our maximum packet length 723 * and size_bin if we're doing 11n rates. 724 */ 725 max_pkt_len = ath_rate_sample_find_min_pktlength(sc, an, best_rix, 726 is_aggr); 727 if (max_pkt_len > 0) { 728 #if 0 729 device_printf(sc->sc_dev, 730 "Limiting maxpktlen from %d to %d bytes\n", 731 (int) frameLen, max_pkt_len); 732 #endif 733 *maxpktlen = frameLen = MIN(frameLen, max_pkt_len); 734 size_bin = size_to_bin(frameLen); 735 } 736 737 if (best_rix >= 0) { 738 average_tx_time = sn->stats[size_bin][best_rix].average_tx_time; 739 } else { 740 average_tx_time = 0; 741 } 742 743 /* 744 * Limit the time measuring the performance of other tx 745 * rates to sample_rate% of the total transmission time. 746 */ 747 if (sn->sample_tt[size_bin] < 748 average_tx_time * 749 (sn->packets_since_sample[size_bin]*ssc->sample_rate/100)) { 750 rix = pick_sample_rate(ssc, an, rt, size_bin); 751 IEEE80211_NOTE(an->an_node.ni_vap, IEEE80211_MSG_RATECTL, 752 &an->an_node, "att %d sample_tt %d size %u " 753 "sample rate %d %s current rate %d %s", 754 average_tx_time, 755 sn->sample_tt[size_bin], 756 bin_to_size(size_bin), 757 dot11rate(rt, rix), 758 dot11rate_label(rt, rix), 759 dot11rate(rt, sn->current_rix[size_bin]), 760 dot11rate_label(rt, sn->current_rix[size_bin])); 761 if (rix != sn->current_rix[size_bin]) { 762 sn->current_sample_rix[size_bin] = rix; 763 } else { 764 sn->current_sample_rix[size_bin] = -1; 765 } 766 sn->packets_since_sample[size_bin] = 0; 767 } else { 768 change_rates = 0; 769 if (!sn->packets_sent[size_bin] || best_rix == -1) { 770 /* no packet has been sent successfully yet */ 771 change_rates = 1; 772 if (an->an_node.ni_flags & IEEE80211_NODE_HT) 773 best_rix = 774 ath_rate_pick_seed_rate_ht(sc, an, frameLen); 775 else 776 best_rix = 777 ath_rate_pick_seed_rate_legacy(sc, an, frameLen); 778 } else if (sn->packets_sent[size_bin] < 20) { 779 /* let the bit-rate switch quickly during the first few packets */ 780 IEEE80211_NOTE(an->an_node.ni_vap, 781 IEEE80211_MSG_RATECTL, &an->an_node, 782 "%s: switching quickly..", __func__); 783 change_rates = 1; 784 } else if (ticks - ssc->min_switch > sn->ticks_since_switch[size_bin]) { 785 /* min_switch seconds have gone by */ 786 IEEE80211_NOTE(an->an_node.ni_vap, 787 IEEE80211_MSG_RATECTL, &an->an_node, 788 "%s: min_switch %d > ticks_since_switch %d..", 789 __func__, ticks - ssc->min_switch, sn->ticks_since_switch[size_bin]); 790 change_rates = 1; 791 } else if ((! (an->an_node.ni_flags & IEEE80211_NODE_HT)) && 792 (2*average_tx_time < sn->stats[size_bin][sn->current_rix[size_bin]].average_tx_time)) { 793 /* the current bit-rate is twice as slow as the best one */ 794 IEEE80211_NOTE(an->an_node.ni_vap, 795 IEEE80211_MSG_RATECTL, &an->an_node, 796 "%s: 2x att (= %d) < cur_rix att %d", 797 __func__, 798 2 * average_tx_time, sn->stats[size_bin][sn->current_rix[size_bin]].average_tx_time); 799 change_rates = 1; 800 } else if ((an->an_node.ni_flags & IEEE80211_NODE_HT)) { 801 int cur_rix = sn->current_rix[size_bin]; 802 int cur_att = sn->stats[size_bin][cur_rix].average_tx_time; 803 /* 804 * If the node is HT, it if the rate isn't the 805 * same and the average tx time is within 10% 806 * of the current rate. It can fail a little. 807 * 808 * This is likely not optimal! 809 */ 810 #if 0 811 printf("cur rix/att %x/%d, best rix/att %x/%d\n", 812 MCS(cur_rix), cur_att, MCS(best_rix), average_tx_time); 813 #endif 814 if ((best_rix != cur_rix) && 815 (average_tx_time * 9) <= (cur_att * 10)) { 816 IEEE80211_NOTE(an->an_node.ni_vap, 817 IEEE80211_MSG_RATECTL, &an->an_node, 818 "%s: HT: size %d best_rix 0x%x > " 819 " cur_rix 0x%x, average_tx_time %d," 820 " cur_att %d", 821 __func__, bin_to_size(size_bin), 822 MCS(best_rix), MCS(cur_rix), 823 average_tx_time, cur_att); 824 change_rates = 1; 825 } 826 } 827 828 sn->packets_since_sample[size_bin]++; 829 830 if (change_rates) { 831 if (best_rix != sn->current_rix[size_bin]) { 832 IEEE80211_NOTE(an->an_node.ni_vap, 833 IEEE80211_MSG_RATECTL, 834 &an->an_node, 835 "%s: size %d switch rate %d %s (%d/%d) EWMA %d -> %d %s (%d/%d) EWMA %d after %d packets mrr %d", 836 __func__, 837 bin_to_size(size_bin), 838 dot11rate(rt, sn->current_rix[size_bin]), 839 dot11rate_label(rt, sn->current_rix[size_bin]), 840 sn->stats[size_bin][sn->current_rix[size_bin]].average_tx_time, 841 sn->stats[size_bin][sn->current_rix[size_bin]].perfect_tx_time, 842 sn->stats[size_bin][sn->current_rix[size_bin]].ewma_pct, 843 dot11rate(rt, best_rix), 844 dot11rate_label(rt, best_rix), 845 sn->stats[size_bin][best_rix].average_tx_time, 846 sn->stats[size_bin][best_rix].perfect_tx_time, 847 sn->stats[size_bin][best_rix].ewma_pct, 848 sn->packets_since_switch[size_bin], 849 mrr); 850 } 851 sn->packets_since_switch[size_bin] = 0; 852 sn->current_rix[size_bin] = best_rix; 853 sn->ticks_since_switch[size_bin] = ticks; 854 /* 855 * Set the visible txrate for this node. 856 */ 857 an->an_node.ni_txrate = 858 (rt->info[best_rix].phy == IEEE80211_T_HT) ? 859 MCS(best_rix) : DOT11RATE(best_rix); 860 } 861 rix = sn->current_rix[size_bin]; 862 sn->packets_since_switch[size_bin]++; 863 } 864 *try0 = mrr ? sn->sched[rix].t0 : ATH_TXMAXTRY; 865 done: 866 867 /* 868 * This bug totally sucks and should be fixed. 869 * 870 * For now though, let's not panic, so we can start to figure 871 * out how to better reproduce it. 872 */ 873 if (rix < 0 || rix >= rt->rateCount) { 874 printf("%s: ERROR: rix %d out of bounds (rateCount=%d)\n", 875 __func__, 876 rix, 877 rt->rateCount); 878 rix = 0; /* XXX just default for now */ 879 } 880 KASSERT(rix >= 0 && rix < rt->rateCount, ("rix is %d", rix)); 881 882 *rix0 = rix; 883 *txrate = rt->info[rix].rateCode 884 | (shortPreamble ? rt->info[rix].shortPreamble : 0); 885 sn->packets_sent[size_bin]++; 886 887 #undef DOT11RATE 888 #undef MCS 889 #undef RATE 890 } 891 892 /* 893 * Get the TX rates. Don't fiddle with short preamble flags for them; 894 * the caller can do that. 895 */ 896 void 897 ath_rate_getxtxrates(struct ath_softc *sc, struct ath_node *an, 898 uint8_t rix0, int is_aggr, struct ath_rc_series *rc) 899 { 900 struct sample_node *sn = ATH_NODE_SAMPLE(an); 901 const struct txschedule *sched = &sn->sched[rix0]; 902 903 KASSERT(rix0 == sched->r0, ("rix0 (%x) != sched->r0 (%x)!\n", 904 rix0, sched->r0)); 905 906 rc[0].flags = rc[1].flags = rc[2].flags = rc[3].flags = 0; 907 908 rc[0].rix = sched->r0; 909 rc[1].rix = sched->r1; 910 rc[2].rix = sched->r2; 911 rc[3].rix = sched->r3; 912 913 rc[0].tries = sched->t0; 914 rc[1].tries = sched->t1; 915 916 if (is_aggr) { 917 rc[2].tries = rc[3].tries = 0; 918 } else { 919 rc[2].tries = sched->t2; 920 rc[3].tries = sched->t3; 921 } 922 } 923 924 void 925 ath_rate_setupxtxdesc(struct ath_softc *sc, struct ath_node *an, 926 struct ath_desc *ds, int shortPreamble, u_int8_t rix) 927 { 928 struct sample_node *sn = ATH_NODE_SAMPLE(an); 929 const struct txschedule *sched = &sn->sched[rix]; 930 const HAL_RATE_TABLE *rt = sc->sc_currates; 931 uint8_t rix1, s1code, rix2, s2code, rix3, s3code; 932 933 /* XXX precalculate short preamble tables */ 934 rix1 = sched->r1; 935 s1code = rt->info[rix1].rateCode 936 | (shortPreamble ? rt->info[rix1].shortPreamble : 0); 937 rix2 = sched->r2; 938 s2code = rt->info[rix2].rateCode 939 | (shortPreamble ? rt->info[rix2].shortPreamble : 0); 940 rix3 = sched->r3; 941 s3code = rt->info[rix3].rateCode 942 | (shortPreamble ? rt->info[rix3].shortPreamble : 0); 943 ath_hal_setupxtxdesc(sc->sc_ah, ds, 944 s1code, sched->t1, /* series 1 */ 945 s2code, sched->t2, /* series 2 */ 946 s3code, sched->t3); /* series 3 */ 947 } 948 949 /* 950 * Update the current statistics. 951 * 952 * Note that status is for the FINAL transmit status, not this 953 * particular attempt. So, check if tries > tries0 and if so 954 * assume this status failed. 955 * 956 * This is important because some failures are due to both 957 * short AND long retries; if the final issue was a short 958 * retry failure then we still want to account for the 959 * bad long retry attempts. 960 */ 961 static void 962 update_stats(struct ath_softc *sc, struct ath_node *an, 963 int frame_size, 964 int rix0, int tries0, 965 int short_tries, int tries, int status, 966 int nframes, int nbad) 967 { 968 struct sample_node *sn = ATH_NODE_SAMPLE(an); 969 struct sample_softc *ssc = ATH_SOFTC_SAMPLE(sc); 970 #ifdef IEEE80211_DEBUG 971 const HAL_RATE_TABLE *rt = sc->sc_currates; 972 #endif 973 const int size_bin = size_to_bin(frame_size); 974 const int size = bin_to_size(size_bin); 975 int tt; 976 int is_ht40 = (an->an_node.ni_chw == 40); 977 int pct; 978 979 if (!IS_RATE_DEFINED(sn, rix0)) 980 return; 981 982 /* 983 * Treat long retries as us exceeding retries, even 984 * if the eventual attempt at some other MRR schedule 985 * succeeded. 986 */ 987 if (tries > tries0) { 988 status = HAL_TXERR_XRETRY; 989 } 990 991 /* 992 * If status is FAIL then we treat all frames as bad. 993 * This better accurately tracks EWMA and average TX time 994 * because even if the eventual transmission succeeded, 995 * transmission at this rate did not. 996 */ 997 if (status != 0) 998 nbad = nframes; 999 1000 /* 1001 * Ignore short tries count as contributing to failure. 1002 * Right now there's no way to know if it's part of any 1003 * given rate attempt, and outside of the RTS/CTS management 1004 * rate, it doesn't /really/ help. 1005 */ 1006 tt = calc_usecs_unicast_packet(sc, size, rix0, 1007 0 /* short_tries */, MIN(tries0, tries) - 1, is_ht40); 1008 1009 if (sn->stats[size_bin][rix0].total_packets < ssc->smoothing_minpackets) { 1010 /* just average the first few packets */ 1011 int avg_tx = sn->stats[size_bin][rix0].average_tx_time; 1012 int packets = sn->stats[size_bin][rix0].total_packets; 1013 sn->stats[size_bin][rix0].average_tx_time = (tt+(avg_tx*packets))/(packets+nframes); 1014 } else { 1015 /* use a ewma */ 1016 sn->stats[size_bin][rix0].average_tx_time = 1017 ((sn->stats[size_bin][rix0].average_tx_time * ssc->smoothing_rate) + 1018 (tt * (100 - ssc->smoothing_rate))) / 100; 1019 } 1020 1021 if (nframes == nbad) { 1022 sn->stats[size_bin][rix0].successive_failures += nbad; 1023 } else { 1024 sn->stats[size_bin][rix0].packets_acked += (nframes - nbad); 1025 sn->stats[size_bin][rix0].successive_failures = 0; 1026 } 1027 sn->stats[size_bin][rix0].tries += tries; 1028 sn->stats[size_bin][rix0].last_tx = ticks; 1029 sn->stats[size_bin][rix0].total_packets += nframes; 1030 1031 /* update EWMA for this rix */ 1032 1033 /* Calculate percentage based on current rate */ 1034 if (nframes == 0) 1035 nframes = nbad = 1; 1036 pct = ((nframes - nbad) * 1000) / nframes; 1037 1038 if (sn->stats[size_bin][rix0].total_packets < 1039 ssc->smoothing_minpackets) { 1040 /* just average the first few packets */ 1041 int a_pct = (sn->stats[size_bin][rix0].packets_acked * 1000) / 1042 (sn->stats[size_bin][rix0].total_packets); 1043 sn->stats[size_bin][rix0].ewma_pct = a_pct; 1044 } else { 1045 /* use a ewma */ 1046 sn->stats[size_bin][rix0].ewma_pct = 1047 ((sn->stats[size_bin][rix0].ewma_pct * ssc->smoothing_rate) + 1048 (pct * (100 - ssc->smoothing_rate))) / 100; 1049 } 1050 1051 /* 1052 * Only update the sample time for the initial sample rix. 1053 * We've updated the statistics on each of the other retries 1054 * fine, but we should only update the sample_tt with what 1055 * was actually sampled. 1056 * 1057 * However, to aide in debugging, log all the failures for 1058 * each of the buckets 1059 */ 1060 IEEE80211_NOTE(an->an_node.ni_vap, IEEE80211_MSG_RATECTL, 1061 &an->an_node, 1062 "%s: size %d %s %s rate %d %s tries (%d/%d) tt %d " 1063 "avg_tt (%d/%d) nfrm %d nbad %d", 1064 __func__, 1065 size, 1066 status ? "FAIL" : "OK", 1067 rix0 == sn->current_sample_rix[size_bin] ? "sample" : "mrr", 1068 dot11rate(rt, rix0), 1069 dot11rate_label(rt, rix0), 1070 short_tries, tries, tt, 1071 sn->stats[size_bin][rix0].average_tx_time, 1072 sn->stats[size_bin][rix0].perfect_tx_time, 1073 nframes, nbad); 1074 1075 if (rix0 == sn->current_sample_rix[size_bin]) { 1076 sn->sample_tt[size_bin] = tt; 1077 sn->current_sample_rix[size_bin] = -1; 1078 } 1079 } 1080 1081 static void 1082 badrate(struct ath_softc *sc, int series, int hwrate, int tries, int status) 1083 { 1084 1085 device_printf(sc->sc_dev, 1086 "bad series%d hwrate 0x%x, tries %u ts_status 0x%x\n", 1087 series, hwrate, tries, status); 1088 } 1089 1090 void 1091 ath_rate_tx_complete(struct ath_softc *sc, struct ath_node *an, 1092 const struct ath_rc_series *rc, const struct ath_tx_status *ts, 1093 int frame_size, int rc_framesize, int nframes, int nbad) 1094 { 1095 struct ieee80211com *ic = &sc->sc_ic; 1096 struct sample_node *sn = ATH_NODE_SAMPLE(an); 1097 int final_rix, short_tries, long_tries; 1098 const HAL_RATE_TABLE *rt = sc->sc_currates; 1099 int status = ts->ts_status; 1100 int mrr; 1101 1102 final_rix = rt->rateCodeToIndex[ts->ts_rate]; 1103 short_tries = ts->ts_shortretry; 1104 long_tries = ts->ts_longretry + 1; 1105 1106 if (nframes == 0) { 1107 device_printf(sc->sc_dev, "%s: nframes=0?\n", __func__); 1108 return; 1109 } 1110 1111 if (frame_size == 0) /* NB: should not happen */ 1112 frame_size = 1500; 1113 if (rc_framesize == 0) /* NB: should not happen */ 1114 rc_framesize = 1500; 1115 1116 /* 1117 * There are still some places where what rate control set as 1118 * a limit but the hardware decided, for some reason, to transmit 1119 * at a smaller size that fell into a different bucket. 1120 * 1121 * The eternal question here is - which size_bin should it go in? 1122 * The one that was requested, or the one that was transmitted? 1123 * 1124 * Here's the problem - if we use the one that was transmitted, 1125 * we may continue to hit corner cases where we make a rate 1126 * selection using a higher bin but only update the smaller bin; 1127 * thus never really "adapting". 1128 * 1129 * If however we update the larger bin, we're not accurately 1130 * representing the channel state at that frame/aggregate size. 1131 * However if we keep hitting the larger request but completing 1132 * a smaller size, we at least updates based on what the 1133 * request was /for/. 1134 * 1135 * I'm going to err on the side of caution and choose the 1136 * latter. 1137 */ 1138 if (size_to_bin(frame_size) != size_to_bin(rc_framesize)) { 1139 #if 0 1140 device_printf(sc->sc_dev, 1141 "%s: completed but frame size buckets mismatch " 1142 "(completed %d tx'ed %d)\n", 1143 __func__, frame_size, rc_framesize); 1144 #endif 1145 frame_size = rc_framesize; 1146 } 1147 1148 if (sn->ratemask == 0) { 1149 IEEE80211_NOTE(an->an_node.ni_vap, IEEE80211_MSG_RATECTL, 1150 &an->an_node, 1151 "%s: size %d %s rate/try %d/%d no rates yet", 1152 __func__, 1153 bin_to_size(size_to_bin(frame_size)), 1154 status ? "FAIL" : "OK", 1155 short_tries, long_tries); 1156 return; 1157 } 1158 mrr = sc->sc_mrretry; 1159 /* XXX check HT protmode too */ 1160 if (mrr && (ic->ic_flags & IEEE80211_F_USEPROT && !sc->sc_mrrprot)) 1161 mrr = 0; 1162 1163 if (!mrr || ts->ts_finaltsi == 0) { 1164 if (!IS_RATE_DEFINED(sn, final_rix)) { 1165 device_printf(sc->sc_dev, 1166 "%s: ts_rate=%d ts_finaltsi=%d, final_rix=%d\n", 1167 __func__, ts->ts_rate, ts->ts_finaltsi, final_rix); 1168 badrate(sc, 0, ts->ts_rate, long_tries, status); 1169 return; 1170 } 1171 /* 1172 * Only one rate was used; optimize work. 1173 */ 1174 IEEE80211_NOTE(an->an_node.ni_vap, IEEE80211_MSG_RATECTL, 1175 &an->an_node, "%s: size %d (%d bytes) %s rate/short/long %d %s/%d/%d nframes/nbad [%d/%d]", 1176 __func__, 1177 bin_to_size(size_to_bin(frame_size)), 1178 frame_size, 1179 status ? "FAIL" : "OK", 1180 dot11rate(rt, final_rix), dot11rate_label(rt, final_rix), 1181 short_tries, long_tries, nframes, nbad); 1182 update_stats(sc, an, frame_size, 1183 final_rix, long_tries, 1184 short_tries, long_tries, status, 1185 nframes, nbad); 1186 1187 } else { 1188 int finalTSIdx = ts->ts_finaltsi; 1189 int i; 1190 1191 /* 1192 * Process intermediate rates that failed. 1193 */ 1194 1195 IEEE80211_NOTE(an->an_node.ni_vap, IEEE80211_MSG_RATECTL, 1196 &an->an_node, 1197 "%s: size %d (%d bytes) finaltsidx %d short %d long %d %s rate/try [%d %s/%d %d %s/%d %d %s/%d %d %s/%d] nframes/nbad [%d/%d]", 1198 __func__, 1199 bin_to_size(size_to_bin(frame_size)), 1200 frame_size, 1201 finalTSIdx, 1202 short_tries, 1203 long_tries, 1204 status ? "FAIL" : "OK", 1205 dot11rate(rt, rc[0].rix), 1206 dot11rate_label(rt, rc[0].rix), rc[0].tries, 1207 dot11rate(rt, rc[1].rix), 1208 dot11rate_label(rt, rc[1].rix), rc[1].tries, 1209 dot11rate(rt, rc[2].rix), 1210 dot11rate_label(rt, rc[2].rix), rc[2].tries, 1211 dot11rate(rt, rc[3].rix), 1212 dot11rate_label(rt, rc[3].rix), rc[3].tries, 1213 nframes, nbad); 1214 1215 for (i = 0; i < 4; i++) { 1216 if (rc[i].tries && !IS_RATE_DEFINED(sn, rc[i].rix)) 1217 badrate(sc, 0, rc[i].ratecode, rc[i].tries, 1218 status); 1219 } 1220 1221 /* 1222 * This used to not penalise other tries because loss 1223 * can be bursty, but it's then not accurately keeping 1224 * the avg TX time and EWMA updated. 1225 */ 1226 if (rc[0].tries) { 1227 update_stats(sc, an, frame_size, 1228 rc[0].rix, rc[0].tries, 1229 short_tries, long_tries, 1230 status, 1231 nframes, nbad); 1232 long_tries -= rc[0].tries; 1233 } 1234 1235 if (rc[1].tries && finalTSIdx > 0) { 1236 update_stats(sc, an, frame_size, 1237 rc[1].rix, rc[1].tries, 1238 short_tries, long_tries, 1239 status, 1240 nframes, nbad); 1241 long_tries -= rc[1].tries; 1242 } 1243 1244 if (rc[2].tries && finalTSIdx > 1) { 1245 update_stats(sc, an, frame_size, 1246 rc[2].rix, rc[2].tries, 1247 short_tries, long_tries, 1248 status, 1249 nframes, nbad); 1250 long_tries -= rc[2].tries; 1251 } 1252 1253 if (rc[3].tries && finalTSIdx > 2) { 1254 update_stats(sc, an, frame_size, 1255 rc[3].rix, rc[3].tries, 1256 short_tries, long_tries, 1257 status, 1258 nframes, nbad); 1259 } 1260 } 1261 } 1262 1263 void 1264 ath_rate_newassoc(struct ath_softc *sc, struct ath_node *an, int isnew) 1265 { 1266 if (isnew) 1267 ath_rate_ctl_reset(sc, &an->an_node); 1268 } 1269 1270 void 1271 ath_rate_update_rx_rssi(struct ath_softc *sc, struct ath_node *an, int rssi) 1272 { 1273 } 1274 1275 static const struct txschedule *mrr_schedules[IEEE80211_MODE_MAX+2] = { 1276 NULL, /* IEEE80211_MODE_AUTO */ 1277 series_11a, /* IEEE80211_MODE_11A */ 1278 series_11g, /* IEEE80211_MODE_11B */ 1279 series_11g, /* IEEE80211_MODE_11G */ 1280 NULL, /* IEEE80211_MODE_FH */ 1281 series_11a, /* IEEE80211_MODE_TURBO_A */ 1282 series_11g, /* IEEE80211_MODE_TURBO_G */ 1283 series_11a, /* IEEE80211_MODE_STURBO_A */ 1284 series_11na, /* IEEE80211_MODE_11NA */ 1285 series_11ng, /* IEEE80211_MODE_11NG */ 1286 series_half, /* IEEE80211_MODE_HALF */ 1287 series_quarter, /* IEEE80211_MODE_QUARTER */ 1288 }; 1289 1290 /* 1291 * Initialize the tables for a node. 1292 */ 1293 static void 1294 ath_rate_ctl_reset(struct ath_softc *sc, struct ieee80211_node *ni) 1295 { 1296 #define RATE(_ix) (ni->ni_rates.rs_rates[(_ix)] & IEEE80211_RATE_VAL) 1297 #define DOT11RATE(_ix) (rt->info[(_ix)].dot11Rate & IEEE80211_RATE_VAL) 1298 #define MCS(_ix) (ni->ni_htrates.rs_rates[_ix] | IEEE80211_RATE_MCS) 1299 struct ath_node *an = ATH_NODE(ni); 1300 struct sample_node *sn = ATH_NODE_SAMPLE(an); 1301 const HAL_RATE_TABLE *rt = sc->sc_currates; 1302 int x, y, rix; 1303 1304 KASSERT(rt != NULL, ("no rate table, mode %u", sc->sc_curmode)); 1305 1306 KASSERT(sc->sc_curmode < IEEE80211_MODE_MAX+2, 1307 ("curmode %u", sc->sc_curmode)); 1308 1309 sn->sched = mrr_schedules[sc->sc_curmode]; 1310 KASSERT(sn->sched != NULL, 1311 ("no mrr schedule for mode %u", sc->sc_curmode)); 1312 1313 sn->static_rix = -1; 1314 ath_rate_update_static_rix(sc, ni); 1315 1316 sn->currates = sc->sc_currates; 1317 1318 /* 1319 * Construct a bitmask of usable rates. This has all 1320 * negotiated rates minus those marked by the hal as 1321 * to be ignored for doing rate control. 1322 */ 1323 sn->ratemask = 0; 1324 /* MCS rates */ 1325 if (ni->ni_flags & IEEE80211_NODE_HT) { 1326 for (x = 0; x < ni->ni_htrates.rs_nrates; x++) { 1327 rix = sc->sc_rixmap[MCS(x)]; 1328 if (rix == 0xff) 1329 continue; 1330 /* skip rates marked broken by hal */ 1331 if (!rt->info[rix].valid) 1332 continue; 1333 KASSERT(rix < SAMPLE_MAXRATES, 1334 ("mcs %u has rix %d", MCS(x), rix)); 1335 sn->ratemask |= (uint64_t) 1<<rix; 1336 } 1337 } 1338 1339 /* Legacy rates */ 1340 for (x = 0; x < ni->ni_rates.rs_nrates; x++) { 1341 rix = sc->sc_rixmap[RATE(x)]; 1342 if (rix == 0xff) 1343 continue; 1344 /* skip rates marked broken by hal */ 1345 if (!rt->info[rix].valid) 1346 continue; 1347 KASSERT(rix < SAMPLE_MAXRATES, 1348 ("rate %u has rix %d", RATE(x), rix)); 1349 sn->ratemask |= (uint64_t) 1<<rix; 1350 } 1351 #ifdef IEEE80211_DEBUG 1352 if (ieee80211_msg(ni->ni_vap, IEEE80211_MSG_RATECTL)) { 1353 uint64_t mask; 1354 1355 ieee80211_note(ni->ni_vap, "[%6D] %s: size 1600 rate/tt", 1356 ni->ni_macaddr, ":", __func__); 1357 for (mask = sn->ratemask, rix = 0; mask != 0; mask >>= 1, rix++) { 1358 if ((mask & 1) == 0) 1359 continue; 1360 printf(" %d %s/%d", dot11rate(rt, rix), dot11rate_label(rt, rix), 1361 calc_usecs_unicast_packet(sc, 1600, rix, 0,0, 1362 (ni->ni_chw == 40))); 1363 } 1364 printf("\n"); 1365 } 1366 #endif 1367 for (y = 0; y < NUM_PACKET_SIZE_BINS; y++) { 1368 int size = bin_to_size(y); 1369 uint64_t mask; 1370 1371 sn->packets_sent[y] = 0; 1372 sn->current_sample_rix[y] = -1; 1373 sn->last_sample_rix[y] = 0; 1374 /* XXX start with first valid rate */ 1375 sn->current_rix[y] = ffs(sn->ratemask)-1; 1376 1377 /* 1378 * Initialize the statistics buckets; these are 1379 * indexed by the rate code index. 1380 */ 1381 for (rix = 0, mask = sn->ratemask; mask != 0; rix++, mask >>= 1) { 1382 if ((mask & 1) == 0) /* not a valid rate */ 1383 continue; 1384 sn->stats[y][rix].successive_failures = 0; 1385 sn->stats[y][rix].tries = 0; 1386 sn->stats[y][rix].total_packets = 0; 1387 sn->stats[y][rix].packets_acked = 0; 1388 sn->stats[y][rix].last_tx = 0; 1389 sn->stats[y][rix].ewma_pct = 0; 1390 1391 sn->stats[y][rix].perfect_tx_time = 1392 calc_usecs_unicast_packet(sc, size, rix, 0, 0, 1393 (ni->ni_chw == 40)); 1394 sn->stats[y][rix].average_tx_time = 1395 sn->stats[y][rix].perfect_tx_time; 1396 } 1397 } 1398 #if 0 1399 /* XXX 0, num_rates-1 are wrong */ 1400 IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_RATECTL, ni, 1401 "%s: %d rates %d%sMbps (%dus)- %d%sMbps (%dus)", __func__, 1402 sn->num_rates, 1403 DOT11RATE(0)/2, DOT11RATE(0) % 1 ? ".5" : "", 1404 sn->stats[1][0].perfect_tx_time, 1405 DOT11RATE(sn->num_rates-1)/2, DOT11RATE(sn->num_rates-1) % 1 ? ".5" : "", 1406 sn->stats[1][sn->num_rates-1].perfect_tx_time 1407 ); 1408 #endif 1409 /* set the visible bit-rate */ 1410 if (sn->static_rix != -1) 1411 ni->ni_txrate = DOT11RATE(sn->static_rix); 1412 else 1413 ni->ni_txrate = RATE(0); 1414 #undef RATE 1415 #undef DOT11RATE 1416 } 1417 1418 /* 1419 * Fetch the statistics for the given node. 1420 * 1421 * The ieee80211 node must be referenced and unlocked, however the ath_node 1422 * must be locked. 1423 * 1424 * The main difference here is that we convert the rate indexes 1425 * to 802.11 rates, or the userland output won't make much sense 1426 * as it has no access to the rix table. 1427 */ 1428 int 1429 ath_rate_fetch_node_stats(struct ath_softc *sc, struct ath_node *an, 1430 struct ath_rateioctl *rs) 1431 { 1432 struct sample_node *sn = ATH_NODE_SAMPLE(an); 1433 const HAL_RATE_TABLE *rt = sc->sc_currates; 1434 struct ath_rateioctl_tlv av; 1435 struct ath_rateioctl_rt *tv; 1436 int error, y; 1437 int o = 0; 1438 1439 ATH_NODE_LOCK_ASSERT(an); 1440 1441 error = 0; 1442 1443 /* 1444 * Ensure there's enough space for the statistics. 1445 */ 1446 if (rs->len < 1447 sizeof(struct ath_rateioctl_tlv) + 1448 sizeof(struct ath_rateioctl_rt) + 1449 sizeof(struct ath_rateioctl_tlv) + 1450 sizeof(struct sample_node)) { 1451 device_printf(sc->sc_dev, "%s: len=%d, too short\n", 1452 __func__, 1453 rs->len); 1454 return (EINVAL); 1455 } 1456 1457 /* 1458 * Take a temporary copy of the sample node state so we can 1459 * modify it before we copy it. 1460 */ 1461 tv = malloc(sizeof(struct ath_rateioctl_rt), M_TEMP, 1462 M_NOWAIT | M_ZERO); 1463 if (tv == NULL) { 1464 return (ENOMEM); 1465 } 1466 1467 /* 1468 * Populate the rate table mapping TLV. 1469 */ 1470 tv->nentries = rt->rateCount; 1471 for (y = 0; y < rt->rateCount; y++) { 1472 tv->ratecode[y] = rt->info[y].dot11Rate & IEEE80211_RATE_VAL; 1473 if (rt->info[y].phy == IEEE80211_T_HT) 1474 tv->ratecode[y] |= IEEE80211_RATE_MCS; 1475 } 1476 1477 o = 0; 1478 /* 1479 * First TLV - rate code mapping 1480 */ 1481 av.tlv_id = ATH_RATE_TLV_RATETABLE; 1482 av.tlv_len = sizeof(struct ath_rateioctl_rt); 1483 error = copyout(&av, rs->buf + o, sizeof(struct ath_rateioctl_tlv)); 1484 if (error != 0) 1485 goto out; 1486 o += sizeof(struct ath_rateioctl_tlv); 1487 error = copyout(tv, rs->buf + o, sizeof(struct ath_rateioctl_rt)); 1488 if (error != 0) 1489 goto out; 1490 o += sizeof(struct ath_rateioctl_rt); 1491 1492 /* 1493 * Second TLV - sample node statistics 1494 */ 1495 av.tlv_id = ATH_RATE_TLV_SAMPLENODE; 1496 av.tlv_len = sizeof(struct sample_node); 1497 error = copyout(&av, rs->buf + o, sizeof(struct ath_rateioctl_tlv)); 1498 if (error != 0) 1499 goto out; 1500 o += sizeof(struct ath_rateioctl_tlv); 1501 1502 /* 1503 * Copy the statistics over to the provided buffer. 1504 */ 1505 error = copyout(sn, rs->buf + o, sizeof(struct sample_node)); 1506 if (error != 0) 1507 goto out; 1508 o += sizeof(struct sample_node); 1509 1510 out: 1511 free(tv, M_TEMP); 1512 return (error); 1513 } 1514 1515 static void 1516 sample_stats(void *arg, struct ieee80211_node *ni) 1517 { 1518 struct ath_softc *sc = arg; 1519 const HAL_RATE_TABLE *rt = sc->sc_currates; 1520 struct sample_node *sn = ATH_NODE_SAMPLE(ATH_NODE(ni)); 1521 uint64_t mask; 1522 int rix, y; 1523 1524 printf("\n[%s] refcnt %d static_rix (%d %s) ratemask 0x%jx\n", 1525 ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni), 1526 dot11rate(rt, sn->static_rix), 1527 dot11rate_label(rt, sn->static_rix), 1528 (uintmax_t)sn->ratemask); 1529 for (y = 0; y < NUM_PACKET_SIZE_BINS; y++) { 1530 printf("[%4u] cur rix %d (%d %s) since switch: packets %d ticks %u\n", 1531 bin_to_size(y), sn->current_rix[y], 1532 dot11rate(rt, sn->current_rix[y]), 1533 dot11rate_label(rt, sn->current_rix[y]), 1534 sn->packets_since_switch[y], sn->ticks_since_switch[y]); 1535 printf("[%4u] last sample (%d %s) cur sample (%d %s) packets sent %d\n", 1536 bin_to_size(y), 1537 dot11rate(rt, sn->last_sample_rix[y]), 1538 dot11rate_label(rt, sn->last_sample_rix[y]), 1539 dot11rate(rt, sn->current_sample_rix[y]), 1540 dot11rate_label(rt, sn->current_sample_rix[y]), 1541 sn->packets_sent[y]); 1542 printf("[%4u] packets since sample %d sample tt %u\n", 1543 bin_to_size(y), sn->packets_since_sample[y], 1544 sn->sample_tt[y]); 1545 } 1546 for (mask = sn->ratemask, rix = 0; mask != 0; mask >>= 1, rix++) { 1547 if ((mask & 1) == 0) 1548 continue; 1549 for (y = 0; y < NUM_PACKET_SIZE_BINS; y++) { 1550 if (sn->stats[y][rix].total_packets == 0) 1551 continue; 1552 printf("[%2u %s:%4u] %8ju:%-8ju (%3d%%) (EWMA %3d.%1d%%) T %8ju F %4d avg %5u last %u\n", 1553 dot11rate(rt, rix), dot11rate_label(rt, rix), 1554 bin_to_size(y), 1555 (uintmax_t) sn->stats[y][rix].total_packets, 1556 (uintmax_t) sn->stats[y][rix].packets_acked, 1557 (int) ((sn->stats[y][rix].packets_acked * 100ULL) / 1558 sn->stats[y][rix].total_packets), 1559 sn->stats[y][rix].ewma_pct / 10, 1560 sn->stats[y][rix].ewma_pct % 10, 1561 (uintmax_t) sn->stats[y][rix].tries, 1562 sn->stats[y][rix].successive_failures, 1563 sn->stats[y][rix].average_tx_time, 1564 ticks - sn->stats[y][rix].last_tx); 1565 } 1566 } 1567 } 1568 1569 static int 1570 ath_rate_sysctl_stats(SYSCTL_HANDLER_ARGS) 1571 { 1572 struct ath_softc *sc = arg1; 1573 struct ieee80211com *ic = &sc->sc_ic; 1574 int error, v; 1575 1576 v = 0; 1577 error = sysctl_handle_int(oidp, &v, 0, req); 1578 if (error || !req->newptr) 1579 return error; 1580 ieee80211_iterate_nodes(&ic->ic_sta, sample_stats, sc); 1581 return 0; 1582 } 1583 1584 static int 1585 ath_rate_sysctl_smoothing_rate(SYSCTL_HANDLER_ARGS) 1586 { 1587 struct sample_softc *ssc = arg1; 1588 int rate, error; 1589 1590 rate = ssc->smoothing_rate; 1591 error = sysctl_handle_int(oidp, &rate, 0, req); 1592 if (error || !req->newptr) 1593 return error; 1594 if (!(0 <= rate && rate < 100)) 1595 return EINVAL; 1596 ssc->smoothing_rate = rate; 1597 ssc->smoothing_minpackets = 100 / (100 - rate); 1598 return 0; 1599 } 1600 1601 static int 1602 ath_rate_sysctl_sample_rate(SYSCTL_HANDLER_ARGS) 1603 { 1604 struct sample_softc *ssc = arg1; 1605 int rate, error; 1606 1607 rate = ssc->sample_rate; 1608 error = sysctl_handle_int(oidp, &rate, 0, req); 1609 if (error || !req->newptr) 1610 return error; 1611 if (!(2 <= rate && rate <= 100)) 1612 return EINVAL; 1613 ssc->sample_rate = rate; 1614 return 0; 1615 } 1616 1617 static void 1618 ath_rate_sysctlattach(struct ath_softc *sc, struct sample_softc *ssc) 1619 { 1620 struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(sc->sc_dev); 1621 struct sysctl_oid *tree = device_get_sysctl_tree(sc->sc_dev); 1622 1623 SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 1624 "smoothing_rate", CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_MPSAFE, 1625 ssc, 0, ath_rate_sysctl_smoothing_rate, "I", 1626 "sample: smoothing rate for avg tx time (%%)"); 1627 SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 1628 "sample_rate", CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_MPSAFE, 1629 ssc, 0, ath_rate_sysctl_sample_rate, "I", 1630 "sample: percent air time devoted to sampling new rates (%%)"); 1631 /* XXX max_successive_failures, stale_failure_timeout, min_switch */ 1632 SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 1633 "sample_stats", CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_MPSAFE, 1634 sc, 0, ath_rate_sysctl_stats, "I", "sample: print statistics"); 1635 } 1636 1637 struct ath_ratectrl * 1638 ath_rate_attach(struct ath_softc *sc) 1639 { 1640 struct sample_softc *ssc; 1641 1642 ssc = malloc(sizeof(struct sample_softc), M_DEVBUF, M_NOWAIT|M_ZERO); 1643 if (ssc == NULL) 1644 return NULL; 1645 ssc->arc.arc_space = sizeof(struct sample_node); 1646 ssc->smoothing_rate = 75; /* ewma percentage ([0..99]) */ 1647 ssc->smoothing_minpackets = 100 / (100 - ssc->smoothing_rate); 1648 ssc->sample_rate = 10; /* %time to try diff tx rates */ 1649 ssc->max_successive_failures = 3; /* threshold for rate sampling*/ 1650 ssc->stale_failure_timeout = 10 * hz; /* 10 seconds */ 1651 ssc->min_switch = hz; /* 1 second */ 1652 ath_rate_sysctlattach(sc, ssc); 1653 return &ssc->arc; 1654 } 1655 1656 void 1657 ath_rate_detach(struct ath_ratectrl *arc) 1658 { 1659 struct sample_softc *ssc = (struct sample_softc *) arc; 1660 1661 free(ssc, M_DEVBUF); 1662 } 1663