1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 2011 Adrian Chadd, Xenion Pty Ltd. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25 * SUCH DAMAGE. 26 * 27 * $FreeBSD$ 28 */ 29 #include "opt_ah.h" 30 31 #include "ah.h" 32 #include "ah_internal.h" 33 34 #include "ah_eeprom_v14.h" 35 36 #include "ar9002/ar9280.h" 37 #include "ar5416/ar5416reg.h" 38 #include "ar5416/ar5416phy.h" 39 #include "ar9002/ar9002phy.h" 40 41 #include "ar9002/ar9280_olc.h" 42 43 void 44 ar9280olcInit(struct ath_hal *ah) 45 { 46 uint32_t i; 47 48 /* Only do OLC if it's enabled for this chipset */ 49 if (! ath_hal_eepromGetFlag(ah, AR_EEP_OL_PWRCTRL)) 50 return; 51 52 HALDEBUG(ah, HAL_DEBUG_RESET, "%s: Setting up TX gain tables.\n", __func__); 53 54 for (i = 0; i < AR9280_TX_GAIN_TABLE_SIZE; i++) 55 AH9280(ah)->originalGain[i] = MS(OS_REG_READ(ah, 56 AR_PHY_TX_GAIN_TBL1 + i * 4), AR_PHY_TX_GAIN); 57 58 AH9280(ah)->PDADCdelta = 0; 59 } 60 61 void 62 ar9280olcGetTxGainIndex(struct ath_hal *ah, 63 const struct ieee80211_channel *chan, 64 struct calDataPerFreqOpLoop *rawDatasetOpLoop, 65 uint8_t *calChans, uint16_t availPiers, uint8_t *pwr, uint8_t *pcdacIdx) 66 { 67 uint8_t pcdac, i = 0; 68 uint16_t idxL = 0, idxR = 0, numPiers; 69 HAL_BOOL match; 70 CHAN_CENTERS centers; 71 72 ar5416GetChannelCenters(ah, chan, ¢ers); 73 74 for (numPiers = 0; numPiers < availPiers; numPiers++) 75 if (calChans[numPiers] == AR5416_BCHAN_UNUSED) 76 break; 77 78 match = ath_ee_getLowerUpperIndex((uint8_t)FREQ2FBIN(centers.synth_center, 79 IEEE80211_IS_CHAN_2GHZ(chan)), calChans, numPiers, 80 &idxL, &idxR); 81 if (match) { 82 pcdac = rawDatasetOpLoop[idxL].pcdac[0][0]; 83 *pwr = rawDatasetOpLoop[idxL].pwrPdg[0][0]; 84 } else { 85 pcdac = rawDatasetOpLoop[idxR].pcdac[0][0]; 86 *pwr = (rawDatasetOpLoop[idxL].pwrPdg[0][0] + 87 rawDatasetOpLoop[idxR].pwrPdg[0][0])/2; 88 } 89 while (pcdac > AH9280(ah)->originalGain[i] && 90 i < (AR9280_TX_GAIN_TABLE_SIZE - 1)) 91 i++; 92 93 *pcdacIdx = i; 94 } 95 96 /* 97 * XXX txPower here is likely not the target txPower in the traditional 98 * XXX sense, but is set by a call to ar9280olcGetTxGainIndex(). 99 * XXX Thus, be careful if you're trying to use this routine yourself. 100 */ 101 void 102 ar9280olcGetPDADCs(struct ath_hal *ah, uint32_t initTxGain, int txPower, 103 uint8_t *pPDADCValues) 104 { 105 uint32_t i; 106 uint32_t offset; 107 108 OS_REG_RMW_FIELD(ah, AR_PHY_TX_PWRCTRL6_0, AR_PHY_TX_PWRCTRL_ERR_EST_MODE, 3); 109 OS_REG_RMW_FIELD(ah, AR_PHY_TX_PWRCTRL6_1, AR_PHY_TX_PWRCTRL_ERR_EST_MODE, 3); 110 111 OS_REG_RMW_FIELD(ah, AR_PHY_TX_PWRCTRL7, AR_PHY_TX_PWRCTRL_INIT_TX_GAIN, initTxGain); 112 113 offset = txPower; 114 for (i = 0; i < AR5416_NUM_PDADC_VALUES; i++) 115 if (i < offset) 116 pPDADCValues[i] = 0x0; 117 else 118 pPDADCValues[i] = 0xFF; 119 } 120 121 /* 122 * Run temperature compensation calibration. 123 * 124 * The TX gain table is adjusted depending upon the difference 125 * between the initial PDADC value and the currently read 126 * average TX power sample value. This value is only valid if 127 * frames have been transmitted, so currPDADC will be 0 if 128 * no frames have yet been transmitted. 129 */ 130 void 131 ar9280olcTemperatureCompensation(struct ath_hal *ah) 132 { 133 uint32_t rddata, i; 134 int delta, currPDADC, regval; 135 uint8_t hpwr_5g = 0; 136 137 if (! ath_hal_eepromGetFlag(ah, AR_EEP_OL_PWRCTRL)) 138 return; 139 140 rddata = OS_REG_READ(ah, AR_PHY_TX_PWRCTRL4); 141 currPDADC = MS(rddata, AR_PHY_TX_PWRCTRL_PD_AVG_OUT); 142 143 HALDEBUG(ah, HAL_DEBUG_PERCAL, 144 "%s: called: initPDADC=%d, currPDADC=%d\n", 145 __func__, AH5416(ah)->initPDADC, currPDADC); 146 147 if (AH5416(ah)->initPDADC == 0 || currPDADC == 0) 148 return; 149 150 (void) (ath_hal_eepromGet(ah, AR_EEP_DAC_HPWR_5G, &hpwr_5g)); 151 152 if (hpwr_5g) 153 delta = (currPDADC - AH5416(ah)->initPDADC + 4) / 8; 154 else 155 delta = (currPDADC - AH5416(ah)->initPDADC + 5) / 10; 156 157 HALDEBUG(ah, HAL_DEBUG_PERCAL, "%s: delta=%d, PDADCdelta=%d\n", 158 __func__, delta, AH9280(ah)->PDADCdelta); 159 160 if (delta != AH9280(ah)->PDADCdelta) { 161 AH9280(ah)->PDADCdelta = delta; 162 for (i = 1; i < AR9280_TX_GAIN_TABLE_SIZE; i++) { 163 regval = AH9280(ah)->originalGain[i] - delta; 164 if (regval < 0) 165 regval = 0; 166 167 OS_REG_RMW_FIELD(ah, 168 AR_PHY_TX_GAIN_TBL1 + i * 4, 169 AR_PHY_TX_GAIN, regval); 170 } 171 } 172 } 173 174 static int16_t 175 ar9280ChangeGainBoundarySettings(struct ath_hal *ah, uint16_t *gb, 176 uint16_t numXpdGain, uint16_t pdGainOverlap_t2, int8_t pwr_table_offset, 177 int16_t *diff) 178 { 179 uint16_t k; 180 181 /* Prior to writing the boundaries or the pdadc vs. power table 182 * into the chip registers the default starting point on the pdadc 183 * vs. power table needs to be checked and the curve boundaries 184 * adjusted accordingly 185 */ 186 if (AR_SREV_MERLIN_20_OR_LATER(ah)) { 187 uint16_t gb_limit; 188 189 if (AR5416_PWR_TABLE_OFFSET_DB != pwr_table_offset) { 190 /* get the difference in dB */ 191 *diff = (uint16_t)(pwr_table_offset - AR5416_PWR_TABLE_OFFSET_DB); 192 /* get the number of half dB steps */ 193 *diff *= 2; 194 /* change the original gain boundary settings 195 * by the number of half dB steps 196 */ 197 for (k = 0; k < numXpdGain; k++) 198 gb[k] = (uint16_t)(gb[k] - *diff); 199 } 200 /* Because of a hardware limitation, ensure the gain boundary 201 * is not larger than (63 - overlap) 202 */ 203 gb_limit = (uint16_t)(AR5416_MAX_RATE_POWER - pdGainOverlap_t2); 204 205 for (k = 0; k < numXpdGain; k++) 206 gb[k] = (uint16_t)min(gb_limit, gb[k]); 207 } 208 209 return *diff; 210 } 211 212 static void 213 ar9280AdjustPDADCValues(struct ath_hal *ah, int8_t pwr_table_offset, 214 int16_t diff, uint8_t *pdadcValues) 215 { 216 #define NUM_PDADC(diff) (AR5416_NUM_PDADC_VALUES - diff) 217 uint16_t k; 218 219 /* If this is a board that has a pwrTableOffset that differs from 220 * the default AR5416_PWR_TABLE_OFFSET_DB then the start of the 221 * pdadc vs pwr table needs to be adjusted prior to writing to the 222 * chip. 223 */ 224 if (AR_SREV_MERLIN_20_OR_LATER(ah)) { 225 if (AR5416_PWR_TABLE_OFFSET_DB != pwr_table_offset) { 226 /* shift the table to start at the new offset */ 227 for (k = 0; k < (uint16_t)NUM_PDADC(diff); k++ ) { 228 pdadcValues[k] = pdadcValues[k + diff]; 229 } 230 231 /* fill the back of the table */ 232 for (k = (uint16_t)NUM_PDADC(diff); k < NUM_PDADC(0); k++) { 233 pdadcValues[k] = pdadcValues[NUM_PDADC(diff)]; 234 } 235 } 236 } 237 #undef NUM_PDADC 238 } 239 /* 240 * This effectively disables the gain boundaries leaving it 241 * to the open-loop TX power control. 242 */ 243 static void 244 ar9280SetGainBoundariesOpenLoop(struct ath_hal *ah, int i, 245 uint16_t pdGainOverlap_t2, uint16_t gainBoundaries[]) 246 { 247 int regChainOffset; 248 249 regChainOffset = ar5416GetRegChainOffset(ah, i); 250 251 /* These are unused for OLC */ 252 (void) pdGainOverlap_t2; 253 (void) gainBoundaries; 254 255 HALDEBUG(ah, HAL_DEBUG_EEPROM, "%s: chain %d: writing closed loop values\n", 256 __func__, i); 257 258 OS_REG_WRITE(ah, AR_PHY_TPCRG5 + regChainOffset, 259 SM(0x6, AR_PHY_TPCRG5_PD_GAIN_OVERLAP) | 260 SM(0x38, AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_1) | 261 SM(0x38, AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_2) | 262 SM(0x38, AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_3) | 263 SM(0x38, AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_4)); 264 } 265 266 /* Eeprom versioning macros. Returns true if the version is equal or newer than the ver specified */ 267 /* XXX shouldn't be here! */ 268 #define EEP_MINOR(_ah) \ 269 (AH_PRIVATE(_ah)->ah_eeversion & AR5416_EEP_VER_MINOR_MASK) 270 #define IS_EEP_MINOR_V2(_ah) (EEP_MINOR(_ah) >= AR5416_EEP_MINOR_VER_2) 271 #define IS_EEP_MINOR_V3(_ah) (EEP_MINOR(_ah) >= AR5416_EEP_MINOR_VER_3) 272 273 /************************************************************** 274 * ar9280SetPowerCalTable 275 * 276 * Pull the PDADC piers from cal data and interpolate them across the given 277 * points as well as from the nearest pier(s) to get a power detector 278 * linear voltage to power level table. 279 * 280 * Handle OLC for Merlin where required. 281 */ 282 HAL_BOOL 283 ar9280SetPowerCalTable(struct ath_hal *ah, struct ar5416eeprom *pEepData, 284 const struct ieee80211_channel *chan, int16_t *pTxPowerIndexOffset) 285 { 286 CAL_DATA_PER_FREQ *pRawDataset; 287 uint8_t *pCalBChans = AH_NULL; 288 uint16_t pdGainOverlap_t2; 289 static uint8_t pdadcValues[AR5416_NUM_PDADC_VALUES]; 290 uint16_t gainBoundaries[AR5416_PD_GAINS_IN_MASK]; 291 uint16_t numPiers, i; 292 int16_t tMinCalPower; 293 uint16_t numXpdGain, xpdMask; 294 uint16_t xpdGainValues[AR5416_NUM_PD_GAINS]; 295 uint32_t regChainOffset; 296 int8_t pwr_table_offset; 297 298 OS_MEMZERO(xpdGainValues, sizeof(xpdGainValues)); 299 300 xpdMask = pEepData->modalHeader[IEEE80211_IS_CHAN_2GHZ(chan)].xpdGain; 301 302 (void) ath_hal_eepromGet(ah, AR_EEP_PWR_TABLE_OFFSET, &pwr_table_offset); 303 304 if (IS_EEP_MINOR_V2(ah)) { 305 pdGainOverlap_t2 = pEepData->modalHeader[IEEE80211_IS_CHAN_2GHZ(chan)].pdGainOverlap; 306 } else { 307 pdGainOverlap_t2 = (uint16_t)(MS(OS_REG_READ(ah, AR_PHY_TPCRG5), AR_PHY_TPCRG5_PD_GAIN_OVERLAP)); 308 } 309 310 if (IEEE80211_IS_CHAN_2GHZ(chan)) { 311 pCalBChans = pEepData->calFreqPier2G; 312 numPiers = AR5416_NUM_2G_CAL_PIERS; 313 } else { 314 pCalBChans = pEepData->calFreqPier5G; 315 numPiers = AR5416_NUM_5G_CAL_PIERS; 316 } 317 318 /* If OLC is being done, set the init PDADC value appropriately */ 319 if (IEEE80211_IS_CHAN_2GHZ(chan) && AR_SREV_MERLIN_20_OR_LATER(ah) && 320 ath_hal_eepromGetFlag(ah, AR_EEP_OL_PWRCTRL)) { 321 struct calDataPerFreq *pRawDataset = pEepData->calPierData2G[0]; 322 AH5416(ah)->initPDADC = ((struct calDataPerFreqOpLoop *) pRawDataset)->vpdPdg[0][0]; 323 } else { 324 /* 325 * XXX ath9k doesn't clear this for 5ghz mode if 326 * it were set in 2ghz mode before! 327 * The Merlin OLC temperature compensation code 328 * uses this to calculate the PDADC delta during 329 * calibration ; 0 here effectively stops the 330 * temperature compensation calibration from 331 * occurring. 332 */ 333 AH5416(ah)->initPDADC = 0; 334 } 335 336 /* Calculate the value of xpdgains from the xpdGain Mask */ 337 numXpdGain = ar5416GetXpdGainValues(ah, xpdMask, xpdGainValues); 338 339 /* Write the detector gain biases and their number */ 340 ar5416WriteDetectorGainBiases(ah, numXpdGain, xpdGainValues); 341 342 for (i = 0; i < AR5416_MAX_CHAINS; i++) { 343 regChainOffset = ar5416GetRegChainOffset(ah, i); 344 if (pEepData->baseEepHeader.txMask & (1 << i)) { 345 uint16_t diff; 346 347 if (IEEE80211_IS_CHAN_2GHZ(chan)) { 348 pRawDataset = pEepData->calPierData2G[i]; 349 } else { 350 pRawDataset = pEepData->calPierData5G[i]; 351 } 352 353 /* Fetch the gain boundaries and the PDADC values */ 354 if (AR_SREV_MERLIN_20_OR_LATER(ah) && 355 ath_hal_eepromGetFlag(ah, AR_EEP_OL_PWRCTRL)) { 356 uint8_t pcdacIdx; 357 uint8_t txPower; 358 359 ar9280olcGetTxGainIndex(ah, chan, 360 (struct calDataPerFreqOpLoop *) pRawDataset, 361 pCalBChans, numPiers, &txPower, &pcdacIdx); 362 ar9280olcGetPDADCs(ah, pcdacIdx, txPower / 2, pdadcValues); 363 } else { 364 ar5416GetGainBoundariesAndPdadcs(ah, chan, 365 pRawDataset, pCalBChans, numPiers, 366 pdGainOverlap_t2, &tMinCalPower, 367 gainBoundaries, pdadcValues, numXpdGain); 368 } 369 370 /* 371 * Prior to writing the boundaries or the pdadc vs. power table 372 * into the chip registers the default starting point on the pdadc 373 * vs. power table needs to be checked and the curve boundaries 374 * adjusted accordingly 375 */ 376 diff = ar9280ChangeGainBoundarySettings(ah, 377 gainBoundaries, numXpdGain, pdGainOverlap_t2, 378 pwr_table_offset, &diff); 379 380 if ((i == 0) || AR_SREV_5416_V20_OR_LATER(ah)) { 381 /* Set gain boundaries for either open- or closed-loop TPC */ 382 if (AR_SREV_MERLIN_20_OR_LATER(ah) && 383 ath_hal_eepromGetFlag(ah, AR_EEP_OL_PWRCTRL)) 384 ar9280SetGainBoundariesOpenLoop(ah, 385 i, pdGainOverlap_t2, 386 gainBoundaries); 387 else 388 ar5416SetGainBoundariesClosedLoop(ah, 389 i, pdGainOverlap_t2, 390 gainBoundaries); 391 } 392 393 /* 394 * If this is a board that has a pwrTableOffset that differs from 395 * the default AR5416_PWR_TABLE_OFFSET_DB then the start of the 396 * pdadc vs pwr table needs to be adjusted prior to writing to the 397 * chip. 398 */ 399 ar9280AdjustPDADCValues(ah, pwr_table_offset, diff, pdadcValues); 400 401 /* Write the power values into the baseband power table */ 402 ar5416WritePdadcValues(ah, i, pdadcValues); 403 } 404 } 405 *pTxPowerIndexOffset = 0; 406 407 return AH_TRUE; 408 } 409