xref: /freebsd/sys/dev/ath/ath_hal/ar5416/ar5416_interrupts.c (revision 0b57cec536236d46e3dba9bd041533462f33dbb7)
1 /*-
2  * SPDX-License-Identifier: ISC
3  *
4  * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting
5  * Copyright (c) 2002-2008 Atheros Communications, Inc.
6  *
7  * Permission to use, copy, modify, and/or distribute this software for any
8  * purpose with or without fee is hereby granted, provided that the above
9  * copyright notice and this permission notice appear in all copies.
10  *
11  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
12  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
13  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
14  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
15  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
16  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
17  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
18  *
19  * $FreeBSD$
20  */
21 #include "opt_ah.h"
22 
23 #include "ah.h"
24 #include "ah_internal.h"
25 
26 #include "ar5416/ar5416.h"
27 #include "ar5416/ar5416reg.h"
28 
29 /*
30  * Checks to see if an interrupt is pending on our NIC
31  *
32  * Returns: TRUE    if an interrupt is pending
33  *          FALSE   if not
34  */
35 HAL_BOOL
36 ar5416IsInterruptPending(struct ath_hal *ah)
37 {
38 	uint32_t isr;
39 
40 	if (AR_SREV_HOWL(ah))
41 		return AH_TRUE;
42 
43 	/*
44 	 * Some platforms trigger our ISR before applying power to
45 	 * the card, so make sure the INTPEND is really 1, not 0xffffffff.
46 	 */
47 	isr = OS_REG_READ(ah, AR_INTR_ASYNC_CAUSE);
48 	if (isr != AR_INTR_SPURIOUS && (isr & AR_INTR_MAC_IRQ) != 0)
49 		return AH_TRUE;
50 
51 	isr = OS_REG_READ(ah, AR_INTR_SYNC_CAUSE);
52 	if (isr != AR_INTR_SPURIOUS && (isr & AR_INTR_SYNC_DEFAULT))
53 		return AH_TRUE;
54 
55 	return AH_FALSE;
56 }
57 
58 /*
59  * Reads the Interrupt Status Register value from the NIC, thus deasserting
60  * the interrupt line, and returns both the masked and unmasked mapped ISR
61  * values.  The value returned is mapped to abstract the hw-specific bit
62  * locations in the Interrupt Status Register.
63  *
64  * (*masked) is cleared on initial call.
65  *
66  * Returns: A hardware-abstracted bitmap of all non-masked-out
67  *          interrupts pending, as well as an unmasked value
68  */
69 HAL_BOOL
70 ar5416GetPendingInterrupts(struct ath_hal *ah, HAL_INT *masked)
71 {
72 	uint32_t isr, isr0, isr1, sync_cause = 0, o_sync_cause = 0;
73 	HAL_CAPABILITIES *pCap = &AH_PRIVATE(ah)->ah_caps;
74 
75 #ifdef	AH_INTERRUPT_DEBUGGING
76 	/*
77 	 * Blank the interrupt debugging area regardless.
78 	 */
79 	bzero(&ah->ah_intrstate, sizeof(ah->ah_intrstate));
80 	ah->ah_syncstate = 0;
81 #endif
82 
83 	/*
84 	 * Verify there's a mac interrupt and the RTC is on.
85 	 */
86 	if (AR_SREV_HOWL(ah)) {
87 		*masked = 0;
88 		isr = OS_REG_READ(ah, AR_ISR);
89 	} else {
90 		if ((OS_REG_READ(ah, AR_INTR_ASYNC_CAUSE) & AR_INTR_MAC_IRQ) &&
91 		    (OS_REG_READ(ah, AR_RTC_STATUS) & AR_RTC_STATUS_M) == AR_RTC_STATUS_ON)
92 			isr = OS_REG_READ(ah, AR_ISR);
93 		else
94 			isr = 0;
95 #ifdef	AH_INTERRUPT_DEBUGGING
96 		ah->ah_syncstate =
97 #endif
98 		o_sync_cause = sync_cause = OS_REG_READ(ah, AR_INTR_SYNC_CAUSE);
99 		sync_cause &= AR_INTR_SYNC_DEFAULT;
100 		*masked = 0;
101 
102 		if (isr == 0 && sync_cause == 0)
103 			return AH_FALSE;
104 	}
105 
106 #ifdef	AH_INTERRUPT_DEBUGGING
107 	ah->ah_intrstate[0] = isr;
108 	ah->ah_intrstate[1] = OS_REG_READ(ah, AR_ISR_S0);
109 	ah->ah_intrstate[2] = OS_REG_READ(ah, AR_ISR_S1);
110 	ah->ah_intrstate[3] = OS_REG_READ(ah, AR_ISR_S2);
111 	ah->ah_intrstate[4] = OS_REG_READ(ah, AR_ISR_S3);
112 	ah->ah_intrstate[5] = OS_REG_READ(ah, AR_ISR_S4);
113 	ah->ah_intrstate[6] = OS_REG_READ(ah, AR_ISR_S5);
114 #endif
115 
116 	if (isr != 0) {
117 		struct ath_hal_5212 *ahp = AH5212(ah);
118 		uint32_t mask2;
119 
120 		mask2 = 0;
121 		if (isr & AR_ISR_BCNMISC) {
122 			uint32_t isr2 = OS_REG_READ(ah, AR_ISR_S2);
123 			if (isr2 & AR_ISR_S2_TIM)
124 				mask2 |= HAL_INT_TIM;
125 			if (isr2 & AR_ISR_S2_DTIM)
126 				mask2 |= HAL_INT_DTIM;
127 			if (isr2 & AR_ISR_S2_DTIMSYNC)
128 				mask2 |= HAL_INT_DTIMSYNC;
129 			if (isr2 & (AR_ISR_S2_CABEND ))
130 				mask2 |= HAL_INT_CABEND;
131 			if (isr2 & AR_ISR_S2_GTT)
132 				mask2 |= HAL_INT_GTT;
133 			if (isr2 & AR_ISR_S2_CST)
134 				mask2 |= HAL_INT_CST;
135 			if (isr2 & AR_ISR_S2_TSFOOR)
136 				mask2 |= HAL_INT_TSFOOR;
137 
138 			/*
139 			 * Don't mask out AR_BCNMISC; instead mask
140 			 * out what causes it.
141 			 */
142 			OS_REG_WRITE(ah, AR_ISR_S2, isr2);
143 			isr &= ~AR_ISR_BCNMISC;
144 		}
145 
146 		if (isr == 0xffffffff) {
147 			*masked = 0;
148 			return AH_FALSE;
149 		}
150 
151 		*masked = isr & HAL_INT_COMMON;
152 
153 		if (isr & (AR_ISR_RXMINTR | AR_ISR_RXINTM))
154 			*masked |= HAL_INT_RX;
155 		if (isr & (AR_ISR_TXMINTR | AR_ISR_TXINTM))
156 			*masked |= HAL_INT_TX;
157 
158 		/*
159 		 * When doing RX interrupt mitigation, the RXOK bit is set
160 		 * in AR_ISR even if the relevant bit in AR_IMR is clear.
161 		 * Since this interrupt may be due to another source, don't
162 		 * just automatically set HAL_INT_RX if it's set, otherwise
163 		 * we could prematurely service the RX queue.
164 		 *
165 		 * In some cases, the driver can even handle all the RX
166 		 * frames just before the mitigation interrupt fires.
167 		 * The subsequent RX processing trip will then end up
168 		 * processing 0 frames.
169 		 */
170 #ifdef	AH_AR5416_INTERRUPT_MITIGATION
171 		if (isr & AR_ISR_RXERR)
172 			*masked |= HAL_INT_RX;
173 #else
174 		if (isr & (AR_ISR_RXOK | AR_ISR_RXERR))
175 			*masked |= HAL_INT_RX;
176 #endif
177 
178 		if (isr & (AR_ISR_TXOK | AR_ISR_TXDESC | AR_ISR_TXERR |
179 		    AR_ISR_TXEOL)) {
180 			*masked |= HAL_INT_TX;
181 
182 			isr0 = OS_REG_READ(ah, AR_ISR_S0);
183 			OS_REG_WRITE(ah, AR_ISR_S0, isr0);
184 			isr1 = OS_REG_READ(ah, AR_ISR_S1);
185 			OS_REG_WRITE(ah, AR_ISR_S1, isr1);
186 
187 			/*
188 			 * Don't clear the primary ISR TX bits, clear
189 			 * what causes them (S0/S1.)
190 			 */
191 			isr &= ~(AR_ISR_TXOK | AR_ISR_TXDESC |
192 			    AR_ISR_TXERR | AR_ISR_TXEOL);
193 
194 			ahp->ah_intrTxqs |= MS(isr0, AR_ISR_S0_QCU_TXOK);
195 			ahp->ah_intrTxqs |= MS(isr0, AR_ISR_S0_QCU_TXDESC);
196 			ahp->ah_intrTxqs |= MS(isr1, AR_ISR_S1_QCU_TXERR);
197 			ahp->ah_intrTxqs |= MS(isr1, AR_ISR_S1_QCU_TXEOL);
198 		}
199 
200 		if ((isr & AR_ISR_GENTMR) || (! pCap->halAutoSleepSupport)) {
201 			uint32_t isr5;
202 			isr5 = OS_REG_READ(ah, AR_ISR_S5);
203 			OS_REG_WRITE(ah, AR_ISR_S5, isr5);
204 			isr &= ~AR_ISR_GENTMR;
205 
206 			if (! pCap->halAutoSleepSupport)
207 				if (isr5 & AR_ISR_S5_TIM_TIMER)
208 					*masked |= HAL_INT_TIM_TIMER;
209 		}
210 		*masked |= mask2;
211 	}
212 
213 	/*
214 	 * Since we're not using AR_ISR_RAC, clear the status bits
215 	 * for handled interrupts here. For bits whose interrupt
216 	 * source is a secondary register, those bits should've been
217 	 * masked out - instead of those bits being written back,
218 	 * their source (ie, the secondary status registers) should
219 	 * be cleared. That way there are no race conditions with
220 	 * new triggers coming in whilst they've been read/cleared.
221 	 */
222 	OS_REG_WRITE(ah, AR_ISR, isr);
223 	/* Flush previous write */
224 	OS_REG_READ(ah, AR_ISR);
225 
226 	if (AR_SREV_HOWL(ah))
227 		return AH_TRUE;
228 
229 	if (sync_cause != 0) {
230 		HALDEBUG(ah, HAL_DEBUG_INTERRUPT, "%s: sync_cause=0x%x\n",
231 		    __func__,
232 		    o_sync_cause);
233 		if (sync_cause & (AR_INTR_SYNC_HOST1_FATAL | AR_INTR_SYNC_HOST1_PERR)) {
234 			*masked |= HAL_INT_FATAL;
235 		}
236 		if (sync_cause & AR_INTR_SYNC_RADM_CPL_TIMEOUT) {
237 			HALDEBUG(ah, HAL_DEBUG_ANY, "%s: RADM CPL timeout\n",
238 			    __func__);
239 			OS_REG_WRITE(ah, AR_RC, AR_RC_HOSTIF);
240 			OS_REG_WRITE(ah, AR_RC, 0);
241 			*masked |= HAL_INT_FATAL;
242 		}
243 		/*
244 		 * On fatal errors collect ISR state for debugging.
245 		 */
246 		if (*masked & HAL_INT_FATAL) {
247 			AH_PRIVATE(ah)->ah_fatalState[0] = isr;
248 			AH_PRIVATE(ah)->ah_fatalState[1] = sync_cause;
249 			HALDEBUG(ah, HAL_DEBUG_ANY,
250 			    "%s: fatal error, ISR_RAC 0x%x SYNC_CAUSE 0x%x\n",
251 			    __func__, isr, sync_cause);
252 		}
253 
254 		OS_REG_WRITE(ah, AR_INTR_SYNC_CAUSE_CLR, sync_cause);
255 		/* NB: flush write */
256 		(void) OS_REG_READ(ah, AR_INTR_SYNC_CAUSE_CLR);
257 	}
258 	return AH_TRUE;
259 }
260 
261 /*
262  * Atomically enables NIC interrupts.  Interrupts are passed in
263  * via the enumerated bitmask in ints.
264  */
265 HAL_INT
266 ar5416SetInterrupts(struct ath_hal *ah, HAL_INT ints)
267 {
268 	struct ath_hal_5212 *ahp = AH5212(ah);
269 	uint32_t omask = ahp->ah_maskReg;
270 	uint32_t mask, mask2;
271 
272 	HALDEBUG(ah, HAL_DEBUG_INTERRUPT, "%s: 0x%x => 0x%x\n",
273 	    __func__, omask, ints);
274 
275 	if (omask & HAL_INT_GLOBAL) {
276 		HALDEBUG(ah, HAL_DEBUG_INTERRUPT, "%s: disable IER\n", __func__);
277 		OS_REG_WRITE(ah, AR_IER, AR_IER_DISABLE);
278 		(void) OS_REG_READ(ah, AR_IER);
279 
280 		if (! AR_SREV_HOWL(ah)) {
281 			OS_REG_WRITE(ah, AR_INTR_ASYNC_ENABLE, 0);
282 			(void) OS_REG_READ(ah, AR_INTR_ASYNC_ENABLE);
283 
284 			OS_REG_WRITE(ah, AR_INTR_SYNC_ENABLE, 0);
285 			(void) OS_REG_READ(ah, AR_INTR_SYNC_ENABLE);
286 		}
287 	}
288 
289 	mask = ints & HAL_INT_COMMON;
290 	mask2 = 0;
291 
292 #ifdef	AH_AR5416_INTERRUPT_MITIGATION
293 	/*
294 	 * Overwrite default mask if Interrupt mitigation
295 	 * is specified for AR5416
296 	 */
297 	if (ints & HAL_INT_RX)
298 		mask |= AR_IMR_RXERR | AR_IMR_RXMINTR | AR_IMR_RXINTM;
299 #else
300 	if (ints & HAL_INT_RX)
301 		mask |= AR_IMR_RXOK | AR_IMR_RXERR | AR_IMR_RXDESC;
302 #endif
303 	if (ints & HAL_INT_TX) {
304 		if (ahp->ah_txOkInterruptMask)
305 			mask |= AR_IMR_TXOK;
306 		if (ahp->ah_txErrInterruptMask)
307 			mask |= AR_IMR_TXERR;
308 		if (ahp->ah_txDescInterruptMask)
309 			mask |= AR_IMR_TXDESC;
310 		if (ahp->ah_txEolInterruptMask)
311 			mask |= AR_IMR_TXEOL;
312 		if (ahp->ah_txUrnInterruptMask)
313 			mask |= AR_IMR_TXURN;
314 	}
315 	if (ints & (HAL_INT_BMISC)) {
316 		mask |= AR_IMR_BCNMISC;
317 		if (ints & HAL_INT_TIM)
318 			mask2 |= AR_IMR_S2_TIM;
319 		if (ints & HAL_INT_DTIM)
320 			mask2 |= AR_IMR_S2_DTIM;
321 		if (ints & HAL_INT_DTIMSYNC)
322 			mask2 |= AR_IMR_S2_DTIMSYNC;
323 		if (ints & HAL_INT_CABEND)
324 			mask2 |= (AR_IMR_S2_CABEND );
325 		if (ints & HAL_INT_CST)
326 			mask2 |= AR_IMR_S2_CST;
327 		if (ints & HAL_INT_TSFOOR)
328 			mask2 |= AR_IMR_S2_TSFOOR;
329 	}
330 
331 	if (ints & (HAL_INT_GTT | HAL_INT_CST)) {
332 		mask |= AR_IMR_BCNMISC;
333 		if (ints & HAL_INT_GTT)
334 			mask2 |= AR_IMR_S2_GTT;
335 		if (ints & HAL_INT_CST)
336 			mask2 |= AR_IMR_S2_CST;
337 	}
338 
339 	/* Write the new IMR and store off our SW copy. */
340 	HALDEBUG(ah, HAL_DEBUG_INTERRUPT, "%s: new IMR 0x%x\n", __func__, mask);
341 	OS_REG_WRITE(ah, AR_IMR, mask);
342 	/* Flush write */
343 	(void) OS_REG_READ(ah, AR_IMR);
344 
345 	mask = OS_REG_READ(ah, AR_IMR_S2) & ~(AR_IMR_S2_TIM |
346 					AR_IMR_S2_DTIM |
347 					AR_IMR_S2_DTIMSYNC |
348 					AR_IMR_S2_CABEND |
349 					AR_IMR_S2_CABTO  |
350 					AR_IMR_S2_TSFOOR |
351 					AR_IMR_S2_GTT |
352 					AR_IMR_S2_CST);
353 	OS_REG_WRITE(ah, AR_IMR_S2, mask | mask2);
354 
355 	ahp->ah_maskReg = ints;
356 
357 	/* Re-enable interrupts if they were enabled before. */
358 	if (ints & HAL_INT_GLOBAL) {
359 		HALDEBUG(ah, HAL_DEBUG_INTERRUPT, "%s: enable IER\n", __func__);
360 		OS_REG_WRITE(ah, AR_IER, AR_IER_ENABLE);
361 
362 		if (! AR_SREV_HOWL(ah)) {
363 			mask = AR_INTR_MAC_IRQ;
364 			if (ints & HAL_INT_GPIO)
365 				mask |= SM(AH5416(ah)->ah_gpioMask,
366 				    AR_INTR_ASYNC_MASK_GPIO);
367 			OS_REG_WRITE(ah, AR_INTR_ASYNC_ENABLE, mask);
368 			OS_REG_WRITE(ah, AR_INTR_ASYNC_MASK, mask);
369 
370 			mask = AR_INTR_SYNC_DEFAULT;
371 			if (ints & HAL_INT_GPIO)
372 				mask |= SM(AH5416(ah)->ah_gpioMask,
373 				    AR_INTR_SYNC_MASK_GPIO);
374 			OS_REG_WRITE(ah, AR_INTR_SYNC_ENABLE, mask);
375 			OS_REG_WRITE(ah, AR_INTR_SYNC_MASK, mask);
376 		}
377 	}
378 
379 	return omask;
380 }
381