1 /*- 2 * SPDX-License-Identifier: ISC 3 * 4 * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting 5 * Copyright (c) 2002-2008 Atheros Communications, Inc. 6 * 7 * Permission to use, copy, modify, and/or distribute this software for any 8 * purpose with or without fee is hereby granted, provided that the above 9 * copyright notice and this permission notice appear in all copies. 10 * 11 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 12 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 13 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 14 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 15 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 16 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 17 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 18 * 19 * $FreeBSD$ 20 */ 21 #include "opt_ah.h" 22 23 #include "ah.h" 24 #include "ah_internal.h" 25 #include "ah_devid.h" 26 27 #include "ah_eeprom_v14.h" 28 29 #include "ar5416/ar5416.h" 30 #include "ar5416/ar5416reg.h" 31 #include "ar5416/ar5416phy.h" 32 33 #include "ar5416/ar5416.ini" 34 35 static void ar5416ConfigPCIE(struct ath_hal *ah, HAL_BOOL restore, 36 HAL_BOOL power_off); 37 static void ar5416DisablePCIE(struct ath_hal *ah); 38 static void ar5416WriteIni(struct ath_hal *ah, 39 const struct ieee80211_channel *chan); 40 static void ar5416SpurMitigate(struct ath_hal *ah, 41 const struct ieee80211_channel *chan); 42 43 static void 44 ar5416AniSetup(struct ath_hal *ah) 45 { 46 static const struct ar5212AniParams aniparams = { 47 .maxNoiseImmunityLevel = 4, /* levels 0..4 */ 48 .totalSizeDesired = { -55, -55, -55, -55, -62 }, 49 .coarseHigh = { -14, -14, -14, -14, -12 }, 50 .coarseLow = { -64, -64, -64, -64, -70 }, 51 .firpwr = { -78, -78, -78, -78, -80 }, 52 .maxSpurImmunityLevel = 7, 53 .cycPwrThr1 = { 2, 4, 6, 8, 10, 12, 14, 16 }, 54 .maxFirstepLevel = 2, /* levels 0..2 */ 55 .firstep = { 0, 4, 8 }, 56 .ofdmTrigHigh = 500, 57 .ofdmTrigLow = 200, 58 .cckTrigHigh = 200, 59 .cckTrigLow = 100, 60 .rssiThrHigh = 40, 61 .rssiThrLow = 7, 62 .period = 100, 63 }; 64 /* NB: disable ANI noise immmunity for reliable RIFS rx */ 65 AH5416(ah)->ah_ani_function &= ~(1 << HAL_ANI_NOISE_IMMUNITY_LEVEL); 66 ar5416AniAttach(ah, &aniparams, &aniparams, AH_TRUE); 67 } 68 69 /* 70 * AR5416 doesn't do OLC or temperature compensation. 71 */ 72 static void 73 ar5416olcInit(struct ath_hal *ah) 74 { 75 } 76 77 static void 78 ar5416olcTempCompensation(struct ath_hal *ah) 79 { 80 } 81 82 /* 83 * Attach for an AR5416 part. 84 */ 85 void 86 ar5416InitState(struct ath_hal_5416 *ahp5416, uint16_t devid, HAL_SOFTC sc, 87 HAL_BUS_TAG st, HAL_BUS_HANDLE sh, HAL_STATUS *status) 88 { 89 struct ath_hal_5212 *ahp; 90 struct ath_hal *ah; 91 92 ahp = &ahp5416->ah_5212; 93 ar5212InitState(ahp, devid, sc, st, sh, status); 94 ah = &ahp->ah_priv.h; 95 96 /* override 5212 methods for our needs */ 97 ah->ah_magic = AR5416_MAGIC; 98 ah->ah_getRateTable = ar5416GetRateTable; 99 ah->ah_detach = ar5416Detach; 100 101 /* Reset functions */ 102 ah->ah_reset = ar5416Reset; 103 ah->ah_phyDisable = ar5416PhyDisable; 104 ah->ah_disable = ar5416Disable; 105 ah->ah_configPCIE = ar5416ConfigPCIE; 106 ah->ah_disablePCIE = ar5416DisablePCIE; 107 ah->ah_perCalibration = ar5416PerCalibration; 108 ah->ah_perCalibrationN = ar5416PerCalibrationN; 109 ah->ah_resetCalValid = ar5416ResetCalValid; 110 ah->ah_setTxPowerLimit = ar5416SetTxPowerLimit; 111 ah->ah_setTxPower = ar5416SetTransmitPower; 112 ah->ah_setBoardValues = ar5416SetBoardValues; 113 114 /* Transmit functions */ 115 ah->ah_stopTxDma = ar5416StopTxDma; 116 ah->ah_setupTxDesc = ar5416SetupTxDesc; 117 ah->ah_setupXTxDesc = ar5416SetupXTxDesc; 118 ah->ah_fillTxDesc = ar5416FillTxDesc; 119 ah->ah_procTxDesc = ar5416ProcTxDesc; 120 ah->ah_getTxCompletionRates = ar5416GetTxCompletionRates; 121 ah->ah_setupTxQueue = ar5416SetupTxQueue; 122 ah->ah_resetTxQueue = ar5416ResetTxQueue; 123 124 /* Receive Functions */ 125 ah->ah_getRxFilter = ar5416GetRxFilter; 126 ah->ah_setRxFilter = ar5416SetRxFilter; 127 ah->ah_stopDmaReceive = ar5416StopDmaReceive; 128 ah->ah_startPcuReceive = ar5416StartPcuReceive; 129 ah->ah_stopPcuReceive = ar5416StopPcuReceive; 130 ah->ah_setupRxDesc = ar5416SetupRxDesc; 131 ah->ah_procRxDesc = ar5416ProcRxDesc; 132 ah->ah_rxMonitor = ar5416RxMonitor; 133 ah->ah_aniPoll = ar5416AniPoll; 134 ah->ah_procMibEvent = ar5416ProcessMibIntr; 135 136 /* Misc Functions */ 137 ah->ah_getCapability = ar5416GetCapability; 138 ah->ah_setCapability = ar5416SetCapability; 139 ah->ah_getDiagState = ar5416GetDiagState; 140 ah->ah_setLedState = ar5416SetLedState; 141 ah->ah_gpioCfgOutput = ar5416GpioCfgOutput; 142 ah->ah_gpioCfgInput = ar5416GpioCfgInput; 143 ah->ah_gpioGet = ar5416GpioGet; 144 ah->ah_gpioSet = ar5416GpioSet; 145 ah->ah_gpioSetIntr = ar5416GpioSetIntr; 146 ah->ah_getTsf64 = ar5416GetTsf64; 147 ah->ah_setTsf64 = ar5416SetTsf64; 148 ah->ah_resetTsf = ar5416ResetTsf; 149 ah->ah_getRfGain = ar5416GetRfgain; 150 ah->ah_setAntennaSwitch = ar5416SetAntennaSwitch; 151 ah->ah_setDecompMask = ar5416SetDecompMask; 152 ah->ah_setCoverageClass = ar5416SetCoverageClass; 153 ah->ah_setQuiet = ar5416SetQuiet; 154 ah->ah_getMibCycleCounts = ar5416GetMibCycleCounts; 155 ah->ah_setChainMasks = ar5416SetChainMasks; 156 157 ah->ah_resetKeyCacheEntry = ar5416ResetKeyCacheEntry; 158 ah->ah_setKeyCacheEntry = ar5416SetKeyCacheEntry; 159 160 /* DFS Functions */ 161 ah->ah_enableDfs = ar5416EnableDfs; 162 ah->ah_getDfsThresh = ar5416GetDfsThresh; 163 ah->ah_getDfsDefaultThresh = ar5416GetDfsDefaultThresh; 164 ah->ah_procRadarEvent = ar5416ProcessRadarEvent; 165 ah->ah_isFastClockEnabled = ar5416IsFastClockEnabled; 166 167 /* Spectral Scan Functions */ 168 ah->ah_spectralConfigure = ar5416ConfigureSpectralScan; 169 ah->ah_spectralGetConfig = ar5416GetSpectralParams; 170 ah->ah_spectralStart = ar5416StartSpectralScan; 171 ah->ah_spectralStop = ar5416StopSpectralScan; 172 ah->ah_spectralIsEnabled = ar5416IsSpectralEnabled; 173 ah->ah_spectralIsActive = ar5416IsSpectralActive; 174 175 /* Power Management Functions */ 176 ah->ah_setPowerMode = ar5416SetPowerMode; 177 178 /* Beacon Management Functions */ 179 ah->ah_setBeaconTimers = ar5416SetBeaconTimers; 180 ah->ah_beaconInit = ar5416BeaconInit; 181 ah->ah_setStationBeaconTimers = ar5416SetStaBeaconTimers; 182 ah->ah_resetStationBeaconTimers = ar5416ResetStaBeaconTimers; 183 ah->ah_getNextTBTT = ar5416GetNextTBTT; 184 185 /* 802.11n Functions */ 186 ah->ah_chainTxDesc = ar5416ChainTxDesc; 187 ah->ah_setupFirstTxDesc = ar5416SetupFirstTxDesc; 188 ah->ah_setupLastTxDesc = ar5416SetupLastTxDesc; 189 ah->ah_set11nRateScenario = ar5416Set11nRateScenario; 190 ah->ah_set11nAggrFirst = ar5416Set11nAggrFirst; 191 ah->ah_set11nAggrMiddle = ar5416Set11nAggrMiddle; 192 ah->ah_set11nAggrLast = ar5416Set11nAggrLast; 193 ah->ah_clr11nAggr = ar5416Clr11nAggr; 194 ah->ah_set11nBurstDuration = ar5416Set11nBurstDuration; 195 ah->ah_get11nExtBusy = ar5416Get11nExtBusy; 196 ah->ah_set11nMac2040 = ar5416Set11nMac2040; 197 ah->ah_get11nRxClear = ar5416Get11nRxClear; 198 ah->ah_set11nRxClear = ar5416Set11nRxClear; 199 ah->ah_set11nVirtMoreFrag = ar5416Set11nVirtualMoreFrag; 200 201 /* Interrupt functions */ 202 ah->ah_isInterruptPending = ar5416IsInterruptPending; 203 ah->ah_getPendingInterrupts = ar5416GetPendingInterrupts; 204 ah->ah_setInterrupts = ar5416SetInterrupts; 205 206 /* Bluetooth Coexistence functions */ 207 ah->ah_btCoexSetInfo = ar5416SetBTCoexInfo; 208 ah->ah_btCoexSetConfig = ar5416BTCoexConfig; 209 ah->ah_btCoexSetQcuThresh = ar5416BTCoexSetQcuThresh; 210 ah->ah_btCoexSetWeights = ar5416BTCoexSetWeights; 211 ah->ah_btCoexSetBmissThresh = ar5416BTCoexSetupBmissThresh; 212 ah->ah_btCoexSetParameter = ar5416BTCoexSetParameter; 213 ah->ah_btCoexDisable = ar5416BTCoexDisable; 214 ah->ah_btCoexEnable = ar5416BTCoexEnable; 215 AH5416(ah)->ah_btCoexSetDiversity = ar5416BTCoexAntennaDiversity; 216 217 ahp->ah_priv.ah_getWirelessModes= ar5416GetWirelessModes; 218 ahp->ah_priv.ah_eepromRead = ar5416EepromRead; 219 #ifdef AH_SUPPORT_WRITE_EEPROM 220 ahp->ah_priv.ah_eepromWrite = ar5416EepromWrite; 221 #endif 222 ahp->ah_priv.ah_getChipPowerLimits = ar5416GetChipPowerLimits; 223 224 /* Internal ops */ 225 AH5416(ah)->ah_writeIni = ar5416WriteIni; 226 AH5416(ah)->ah_spurMitigate = ar5416SpurMitigate; 227 228 /* Internal baseband ops */ 229 AH5416(ah)->ah_initPLL = ar5416InitPLL; 230 231 /* Internal calibration ops */ 232 AH5416(ah)->ah_cal_initcal = ar5416InitCalHardware; 233 234 /* Internal TX power control related operations */ 235 AH5416(ah)->ah_olcInit = ar5416olcInit; 236 AH5416(ah)->ah_olcTempCompensation = ar5416olcTempCompensation; 237 AH5416(ah)->ah_setPowerCalTable = ar5416SetPowerCalTable; 238 239 /* 240 * Start by setting all Owl devices to 2x2 241 */ 242 AH5416(ah)->ah_rx_chainmask = AR5416_DEFAULT_RXCHAINMASK; 243 AH5416(ah)->ah_tx_chainmask = AR5416_DEFAULT_TXCHAINMASK; 244 245 /* Enable all ANI functions to begin with */ 246 AH5416(ah)->ah_ani_function = 0xffffffff; 247 248 /* Set overridable ANI methods */ 249 AH5212(ah)->ah_aniControl = ar5416AniControl; 250 251 /* 252 * Default FIFO Trigger levels 253 * 254 * These define how filled the TX FIFO needs to be before 255 * the baseband begins to be given some data. 256 * 257 * To be paranoid, we ensure that the TX trigger level always 258 * has at least enough space for two TX DMA to occur. 259 * The TX DMA size is currently hard-coded to AR_TXCFG_DMASZ_128B. 260 * That means we need to leave at least 256 bytes available in 261 * the TX DMA FIFO. 262 */ 263 #define AR_FTRIG_512B 0x00000080 // 5 bits total 264 /* 265 * AR9285/AR9271 have half the size TX FIFO compared to 266 * other devices 267 */ 268 if (AR_SREV_KITE(ah) || AR_SREV_9271(ah)) { 269 AH5212(ah)->ah_txTrigLev = (AR_FTRIG_256B >> AR_FTRIG_S); 270 AH5212(ah)->ah_maxTxTrigLev = ((2048 / 64) - 1); 271 } else { 272 AH5212(ah)->ah_txTrigLev = (AR_FTRIG_512B >> AR_FTRIG_S); 273 AH5212(ah)->ah_maxTxTrigLev = ((4096 / 64) - 1); 274 } 275 #undef AR_FTRIG_512B 276 277 /* And now leave some headspace - 256 bytes */ 278 AH5212(ah)->ah_maxTxTrigLev -= 4; 279 } 280 281 uint32_t 282 ar5416GetRadioRev(struct ath_hal *ah) 283 { 284 uint32_t val; 285 int i; 286 287 /* Read Radio Chip Rev Extract */ 288 OS_REG_WRITE(ah, AR_PHY(0x36), 0x00007058); 289 for (i = 0; i < 8; i++) 290 OS_REG_WRITE(ah, AR_PHY(0x20), 0x00010000); 291 val = (OS_REG_READ(ah, AR_PHY(256)) >> 24) & 0xff; 292 val = ((val & 0xf0) >> 4) | ((val & 0x0f) << 4); 293 return ath_hal_reverseBits(val, 8); 294 } 295 296 /* 297 * Attach for an AR5416 part. 298 */ 299 static struct ath_hal * 300 ar5416Attach(uint16_t devid, HAL_SOFTC sc, 301 HAL_BUS_TAG st, HAL_BUS_HANDLE sh, uint16_t *eepromdata, 302 HAL_OPS_CONFIG *ah_config, HAL_STATUS *status) 303 { 304 struct ath_hal_5416 *ahp5416; 305 struct ath_hal_5212 *ahp; 306 struct ath_hal *ah; 307 uint32_t val; 308 HAL_STATUS ecode; 309 HAL_BOOL rfStatus; 310 311 HALDEBUG(AH_NULL, HAL_DEBUG_ATTACH, "%s: sc %p st %p sh %p\n", 312 __func__, sc, (void*) st, (void*) sh); 313 314 /* NB: memory is returned zero'd */ 315 ahp5416 = ath_hal_malloc(sizeof (struct ath_hal_5416) + 316 /* extra space for Owl 2.1/2.2 WAR */ 317 sizeof(ar5416Addac) 318 ); 319 if (ahp5416 == AH_NULL) { 320 HALDEBUG(AH_NULL, HAL_DEBUG_ANY, 321 "%s: cannot allocate memory for state block\n", __func__); 322 *status = HAL_ENOMEM; 323 return AH_NULL; 324 } 325 ar5416InitState(ahp5416, devid, sc, st, sh, status); 326 ahp = &ahp5416->ah_5212; 327 ah = &ahp->ah_priv.h; 328 329 if (!ar5416SetResetReg(ah, HAL_RESET_POWER_ON)) { 330 /* reset chip */ 331 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: couldn't reset chip\n", __func__); 332 ecode = HAL_EIO; 333 goto bad; 334 } 335 336 if (!ar5416SetPowerMode(ah, HAL_PM_AWAKE, AH_TRUE)) { 337 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: couldn't wakeup chip\n", __func__); 338 ecode = HAL_EIO; 339 goto bad; 340 } 341 /* Read Revisions from Chips before taking out of reset */ 342 val = OS_REG_READ(ah, AR_SREV) & AR_SREV_ID; 343 AH_PRIVATE(ah)->ah_macVersion = val >> AR_SREV_ID_S; 344 AH_PRIVATE(ah)->ah_macRev = val & AR_SREV_REVISION; 345 AH_PRIVATE(ah)->ah_ispcie = (devid == AR5416_DEVID_PCIE); 346 347 /* setup common ini data; rf backends handle remainder */ 348 HAL_INI_INIT(&ahp->ah_ini_modes, ar5416Modes, 6); 349 HAL_INI_INIT(&ahp->ah_ini_common, ar5416Common, 2); 350 351 HAL_INI_INIT(&AH5416(ah)->ah_ini_bb_rfgain, ar5416BB_RfGain, 3); 352 HAL_INI_INIT(&AH5416(ah)->ah_ini_bank0, ar5416Bank0, 2); 353 HAL_INI_INIT(&AH5416(ah)->ah_ini_bank1, ar5416Bank1, 2); 354 HAL_INI_INIT(&AH5416(ah)->ah_ini_bank2, ar5416Bank2, 2); 355 HAL_INI_INIT(&AH5416(ah)->ah_ini_bank3, ar5416Bank3, 3); 356 HAL_INI_INIT(&AH5416(ah)->ah_ini_bank6, ar5416Bank6, 3); 357 HAL_INI_INIT(&AH5416(ah)->ah_ini_bank7, ar5416Bank7, 2); 358 HAL_INI_INIT(&AH5416(ah)->ah_ini_addac, ar5416Addac, 2); 359 360 if (! IS_5416V2_2(ah)) { /* Owl 2.1/2.0 */ 361 ath_hal_printf(ah, "[ath] Enabling CLKDRV workaround for AR5416 < v2.2\n"); 362 struct ini { 363 uint32_t *data; /* NB: !const */ 364 int rows, cols; 365 }; 366 /* override CLKDRV value */ 367 OS_MEMCPY(&AH5416(ah)[1], ar5416Addac, sizeof(ar5416Addac)); 368 AH5416(ah)->ah_ini_addac.data = (uint32_t *) &AH5416(ah)[1]; 369 HAL_INI_VAL((struct ini *)&AH5416(ah)->ah_ini_addac, 31, 1) = 0; 370 } 371 372 HAL_INI_INIT(&AH5416(ah)->ah_ini_pcieserdes, ar5416PciePhy, 2); 373 ar5416AttachPCIE(ah); 374 375 ecode = ath_hal_v14EepromAttach(ah); 376 if (ecode != HAL_OK) 377 goto bad; 378 379 if (!ar5416ChipReset(ah, AH_NULL)) { /* reset chip */ 380 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: chip reset failed\n", 381 __func__); 382 ecode = HAL_EIO; 383 goto bad; 384 } 385 386 AH_PRIVATE(ah)->ah_phyRev = OS_REG_READ(ah, AR_PHY_CHIP_ID); 387 388 if (!ar5212ChipTest(ah)) { 389 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: hardware self-test failed\n", 390 __func__); 391 ecode = HAL_ESELFTEST; 392 goto bad; 393 } 394 395 /* 396 * Set correct Baseband to analog shift 397 * setting to access analog chips. 398 */ 399 OS_REG_WRITE(ah, AR_PHY(0), 0x00000007); 400 401 /* Read Radio Chip Rev Extract */ 402 AH_PRIVATE(ah)->ah_analog5GhzRev = ar5416GetRadioRev(ah); 403 switch (AH_PRIVATE(ah)->ah_analog5GhzRev & AR_RADIO_SREV_MAJOR) { 404 case AR_RAD5122_SREV_MAJOR: /* Fowl: 5G/2x2 */ 405 case AR_RAD2122_SREV_MAJOR: /* Fowl: 2+5G/2x2 */ 406 case AR_RAD2133_SREV_MAJOR: /* Fowl: 2G/3x3 */ 407 case AR_RAD5133_SREV_MAJOR: /* Fowl: 2+5G/3x3 */ 408 break; 409 default: 410 if (AH_PRIVATE(ah)->ah_analog5GhzRev == 0) { 411 /* 412 * When RF_Silen is used the analog chip is reset. 413 * So when the system boots with radio switch off 414 * the RF chip rev reads back as zero and we need 415 * to use the mac+phy revs to set the radio rev. 416 */ 417 AH_PRIVATE(ah)->ah_analog5GhzRev = 418 AR_RAD5133_SREV_MAJOR; 419 break; 420 } 421 /* NB: silently accept anything in release code per Atheros */ 422 #ifdef AH_DEBUG 423 HALDEBUG(ah, HAL_DEBUG_ANY, 424 "%s: 5G Radio Chip Rev 0x%02X is not supported by " 425 "this driver\n", __func__, 426 AH_PRIVATE(ah)->ah_analog5GhzRev); 427 ecode = HAL_ENOTSUPP; 428 goto bad; 429 #endif 430 } 431 432 /* 433 * Got everything we need now to setup the capabilities. 434 */ 435 if (!ar5416FillCapabilityInfo(ah)) { 436 ecode = HAL_EEREAD; 437 goto bad; 438 } 439 440 ecode = ath_hal_eepromGet(ah, AR_EEP_MACADDR, ahp->ah_macaddr); 441 if (ecode != HAL_OK) { 442 HALDEBUG(ah, HAL_DEBUG_ANY, 443 "%s: error getting mac address from EEPROM\n", __func__); 444 goto bad; 445 } 446 /* XXX How about the serial number ? */ 447 /* Read Reg Domain */ 448 AH_PRIVATE(ah)->ah_currentRD = 449 ath_hal_eepromGet(ah, AR_EEP_REGDMN_0, AH_NULL); 450 AH_PRIVATE(ah)->ah_currentRDext = 451 ath_hal_eepromGet(ah, AR_EEP_REGDMN_1, AH_NULL); 452 453 /* 454 * ah_miscMode is populated by ar5416FillCapabilityInfo() 455 * starting from griffin. Set here to make sure that 456 * AR_MISC_MODE_MIC_NEW_LOC_ENABLE is set before a GTK is 457 * placed into hardware. 458 */ 459 if (ahp->ah_miscMode != 0) 460 OS_REG_WRITE(ah, AR_MISC_MODE, OS_REG_READ(ah, AR_MISC_MODE) | ahp->ah_miscMode); 461 462 rfStatus = ar2133RfAttach(ah, &ecode); 463 if (!rfStatus) { 464 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: RF setup failed, status %u\n", 465 __func__, ecode); 466 goto bad; 467 } 468 469 ar5416AniSetup(ah); /* Anti Noise Immunity */ 470 471 AH5416(ah)->nf_2g.max = AR_PHY_CCA_MAX_GOOD_VAL_5416_2GHZ; 472 AH5416(ah)->nf_2g.min = AR_PHY_CCA_MIN_GOOD_VAL_5416_2GHZ; 473 AH5416(ah)->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_5416_2GHZ; 474 AH5416(ah)->nf_5g.max = AR_PHY_CCA_MAX_GOOD_VAL_5416_5GHZ; 475 AH5416(ah)->nf_5g.min = AR_PHY_CCA_MIN_GOOD_VAL_5416_5GHZ; 476 AH5416(ah)->nf_5g.nominal = AR_PHY_CCA_NOM_VAL_5416_5GHZ; 477 478 ar5416InitNfHistBuff(AH5416(ah)->ah_cal.nfCalHist); 479 480 HALDEBUG(ah, HAL_DEBUG_ATTACH, "%s: return\n", __func__); 481 482 return ah; 483 bad: 484 if (ahp) 485 ar5416Detach((struct ath_hal *) ahp); 486 if (status) 487 *status = ecode; 488 return AH_NULL; 489 } 490 491 void 492 ar5416Detach(struct ath_hal *ah) 493 { 494 HALDEBUG(ah, HAL_DEBUG_ATTACH, "%s:\n", __func__); 495 496 HALASSERT(ah != AH_NULL); 497 HALASSERT(ah->ah_magic == AR5416_MAGIC); 498 499 /* Make sure that chip is awake before writing to it */ 500 if (! ar5416SetPowerMode(ah, HAL_PM_AWAKE, AH_TRUE)) 501 HALDEBUG(ah, HAL_DEBUG_UNMASKABLE, 502 "%s: failed to wake up chip\n", 503 __func__); 504 505 ar5416AniDetach(ah); 506 ar5212RfDetach(ah); 507 ah->ah_disable(ah); 508 ar5416SetPowerMode(ah, HAL_PM_FULL_SLEEP, AH_TRUE); 509 ath_hal_eepromDetach(ah); 510 ath_hal_free(ah); 511 } 512 513 void 514 ar5416AttachPCIE(struct ath_hal *ah) 515 { 516 if (AH_PRIVATE(ah)->ah_ispcie) 517 ath_hal_configPCIE(ah, AH_FALSE, AH_FALSE); 518 else 519 ath_hal_disablePCIE(ah); 520 } 521 522 static void 523 ar5416ConfigPCIE(struct ath_hal *ah, HAL_BOOL restore, HAL_BOOL power_off) 524 { 525 526 /* This is only applicable for AR5418 (AR5416 PCIe) */ 527 if (! AH_PRIVATE(ah)->ah_ispcie) 528 return; 529 530 if (! restore) { 531 ath_hal_ini_write(ah, &AH5416(ah)->ah_ini_pcieserdes, 1, 0); 532 OS_DELAY(1000); 533 } 534 535 if (power_off) { /* Power-off */ 536 /* clear bit 19 to disable L1 */ 537 OS_REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA); 538 } else { /* Power-on */ 539 /* Set default WAR values for Owl */ 540 OS_REG_WRITE(ah, AR_WA, AR_WA_DEFAULT); 541 542 /* set bit 19 to allow forcing of pcie core into L1 state */ 543 OS_REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA); 544 } 545 } 546 547 /* 548 * Disable PCIe PHY if PCIe isn't used. 549 */ 550 static void 551 ar5416DisablePCIE(struct ath_hal *ah) 552 { 553 554 /* PCIe? Don't */ 555 if (AH_PRIVATE(ah)->ah_ispcie) 556 return; 557 558 /* .. Only applicable for AR5416v2 or later */ 559 if (! (AR_SREV_OWL(ah) && AR_SREV_OWL_20_OR_LATER(ah))) 560 return; 561 562 OS_REG_WRITE_BUFFER_ENABLE(ah); 563 564 /* 565 * Disable the PCIe PHY. 566 */ 567 OS_REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fc00); 568 OS_REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924); 569 OS_REG_WRITE(ah, AR_PCIE_SERDES, 0x28000029); 570 OS_REG_WRITE(ah, AR_PCIE_SERDES, 0x57160824); 571 OS_REG_WRITE(ah, AR_PCIE_SERDES, 0x25980579); 572 OS_REG_WRITE(ah, AR_PCIE_SERDES, 0x00000000); 573 OS_REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40); 574 OS_REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554); 575 OS_REG_WRITE(ah, AR_PCIE_SERDES, 0x000e1007); 576 577 /* Load the new settings */ 578 OS_REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000); 579 580 OS_REG_WRITE_BUFFER_FLUSH(ah); 581 OS_REG_WRITE_BUFFER_DISABLE(ah); 582 } 583 584 static void 585 ar5416WriteIni(struct ath_hal *ah, const struct ieee80211_channel *chan) 586 { 587 u_int modesIndex, freqIndex; 588 int regWrites = 0; 589 590 /* Setup the indices for the next set of register array writes */ 591 /* XXX Ignore 11n dynamic mode on the AR5416 for the moment */ 592 if (IEEE80211_IS_CHAN_2GHZ(chan)) { 593 freqIndex = 2; 594 if (IEEE80211_IS_CHAN_HT40(chan)) 595 modesIndex = 3; 596 else if (IEEE80211_IS_CHAN_108G(chan)) 597 modesIndex = 5; 598 else 599 modesIndex = 4; 600 } else { 601 freqIndex = 1; 602 if (IEEE80211_IS_CHAN_HT40(chan) || 603 IEEE80211_IS_CHAN_TURBO(chan)) 604 modesIndex = 2; 605 else 606 modesIndex = 1; 607 } 608 609 /* Set correct Baseband to analog shift setting to access analog chips. */ 610 OS_REG_WRITE(ah, AR_PHY(0), 0x00000007); 611 612 /* 613 * Write addac shifts 614 */ 615 OS_REG_WRITE(ah, AR_PHY_ADC_SERIAL_CTL, AR_PHY_SEL_EXTERNAL_RADIO); 616 617 /* NB: only required for Sowl */ 618 if (AR_SREV_SOWL(ah)) 619 ar5416EepromSetAddac(ah, chan); 620 621 regWrites = ath_hal_ini_write(ah, &AH5416(ah)->ah_ini_addac, 1, 622 regWrites); 623 OS_REG_WRITE(ah, AR_PHY_ADC_SERIAL_CTL, AR_PHY_SEL_INTERNAL_ADDAC); 624 625 regWrites = ath_hal_ini_write(ah, &AH5212(ah)->ah_ini_modes, 626 modesIndex, regWrites); 627 regWrites = ath_hal_ini_write(ah, &AH5212(ah)->ah_ini_common, 628 1, regWrites); 629 630 /* XXX updated regWrites? */ 631 AH5212(ah)->ah_rfHal->writeRegs(ah, modesIndex, freqIndex, regWrites); 632 } 633 634 /* 635 * Convert to baseband spur frequency given input channel frequency 636 * and compute register settings below. 637 */ 638 639 static void 640 ar5416SpurMitigate(struct ath_hal *ah, const struct ieee80211_channel *chan) 641 { 642 uint16_t freq = ath_hal_gethwchannel(ah, chan); 643 static const int pilot_mask_reg[4] = { AR_PHY_TIMING7, AR_PHY_TIMING8, 644 AR_PHY_PILOT_MASK_01_30, AR_PHY_PILOT_MASK_31_60 }; 645 static const int chan_mask_reg[4] = { AR_PHY_TIMING9, AR_PHY_TIMING10, 646 AR_PHY_CHANNEL_MASK_01_30, AR_PHY_CHANNEL_MASK_31_60 }; 647 static const int inc[4] = { 0, 100, 0, 0 }; 648 649 int bb_spur = AR_NO_SPUR; 650 int bin, cur_bin; 651 int spur_freq_sd; 652 int spur_delta_phase; 653 int denominator; 654 int upper, lower, cur_vit_mask; 655 int tmp, new; 656 int i; 657 658 int8_t mask_m[123]; 659 int8_t mask_p[123]; 660 int8_t mask_amt; 661 int tmp_mask; 662 int cur_bb_spur; 663 HAL_BOOL is2GHz = IEEE80211_IS_CHAN_2GHZ(chan); 664 665 OS_MEMZERO(mask_m, sizeof(mask_m)); 666 OS_MEMZERO(mask_p, sizeof(mask_p)); 667 668 /* 669 * Need to verify range +/- 9.5 for static ht20, otherwise spur 670 * is out-of-band and can be ignored. 671 */ 672 /* XXX ath9k changes */ 673 for (i = 0; i < AR5416_EEPROM_MODAL_SPURS; i++) { 674 cur_bb_spur = ath_hal_getSpurChan(ah, i, is2GHz); 675 if (AR_NO_SPUR == cur_bb_spur) 676 break; 677 cur_bb_spur = cur_bb_spur - (freq * 10); 678 if ((cur_bb_spur > -95) && (cur_bb_spur < 95)) { 679 bb_spur = cur_bb_spur; 680 break; 681 } 682 } 683 if (AR_NO_SPUR == bb_spur) 684 return; 685 686 bin = bb_spur * 32; 687 688 tmp = OS_REG_READ(ah, AR_PHY_TIMING_CTRL4_CHAIN(0)); 689 new = tmp | (AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI | 690 AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER | 691 AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK | 692 AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK); 693 694 OS_REG_WRITE_BUFFER_ENABLE(ah); 695 696 OS_REG_WRITE(ah, AR_PHY_TIMING_CTRL4_CHAIN(0), new); 697 698 new = (AR_PHY_SPUR_REG_MASK_RATE_CNTL | 699 AR_PHY_SPUR_REG_ENABLE_MASK_PPM | 700 AR_PHY_SPUR_REG_MASK_RATE_SELECT | 701 AR_PHY_SPUR_REG_ENABLE_VIT_SPUR_RSSI | 702 SM(AR5416_SPUR_RSSI_THRESH, AR_PHY_SPUR_REG_SPUR_RSSI_THRESH)); 703 OS_REG_WRITE(ah, AR_PHY_SPUR_REG, new); 704 /* 705 * Should offset bb_spur by +/- 10 MHz for dynamic 2040 MHz 706 * config, no offset for HT20. 707 * spur_delta_phase = bb_spur/40 * 2**21 for static ht20, 708 * /80 for dyn2040. 709 */ 710 spur_delta_phase = ((bb_spur * 524288) / 100) & 711 AR_PHY_TIMING11_SPUR_DELTA_PHASE; 712 /* 713 * in 11A mode the denominator of spur_freq_sd should be 40 and 714 * it should be 44 in 11G 715 */ 716 denominator = IEEE80211_IS_CHAN_2GHZ(chan) ? 440 : 400; 717 spur_freq_sd = ((bb_spur * 2048) / denominator) & 0x3ff; 718 719 new = (AR_PHY_TIMING11_USE_SPUR_IN_AGC | 720 SM(spur_freq_sd, AR_PHY_TIMING11_SPUR_FREQ_SD) | 721 SM(spur_delta_phase, AR_PHY_TIMING11_SPUR_DELTA_PHASE)); 722 OS_REG_WRITE(ah, AR_PHY_TIMING11, new); 723 724 725 /* 726 * ============================================ 727 * pilot mask 1 [31:0] = +6..-26, no 0 bin 728 * pilot mask 2 [19:0] = +26..+7 729 * 730 * channel mask 1 [31:0] = +6..-26, no 0 bin 731 * channel mask 2 [19:0] = +26..+7 732 */ 733 //cur_bin = -26; 734 cur_bin = -6000; 735 upper = bin + 100; 736 lower = bin - 100; 737 738 for (i = 0; i < 4; i++) { 739 int pilot_mask = 0; 740 int chan_mask = 0; 741 int bp = 0; 742 for (bp = 0; bp < 30; bp++) { 743 if ((cur_bin > lower) && (cur_bin < upper)) { 744 pilot_mask = pilot_mask | 0x1 << bp; 745 chan_mask = chan_mask | 0x1 << bp; 746 } 747 cur_bin += 100; 748 } 749 cur_bin += inc[i]; 750 OS_REG_WRITE(ah, pilot_mask_reg[i], pilot_mask); 751 OS_REG_WRITE(ah, chan_mask_reg[i], chan_mask); 752 } 753 754 /* ================================================= 755 * viterbi mask 1 based on channel magnitude 756 * four levels 0-3 757 * - mask (-27 to 27) (reg 64,0x9900 to 67,0x990c) 758 * [1 2 2 1] for -9.6 or [1 2 1] for +16 759 * - enable_mask_ppm, all bins move with freq 760 * 761 * - mask_select, 8 bits for rates (reg 67,0x990c) 762 * - mask_rate_cntl, 8 bits for rates (reg 67,0x990c) 763 * choose which mask to use mask or mask2 764 */ 765 766 /* 767 * viterbi mask 2 2nd set for per data rate puncturing 768 * four levels 0-3 769 * - mask_select, 8 bits for rates (reg 67) 770 * - mask (-27 to 27) (reg 98,0x9988 to 101,0x9994) 771 * [1 2 2 1] for -9.6 or [1 2 1] for +16 772 */ 773 cur_vit_mask = 6100; 774 upper = bin + 120; 775 lower = bin - 120; 776 777 for (i = 0; i < 123; i++) { 778 if ((cur_vit_mask > lower) && (cur_vit_mask < upper)) { 779 if ((abs(cur_vit_mask - bin)) < 75) { 780 mask_amt = 1; 781 } else { 782 mask_amt = 0; 783 } 784 if (cur_vit_mask < 0) { 785 mask_m[abs(cur_vit_mask / 100)] = mask_amt; 786 } else { 787 mask_p[cur_vit_mask / 100] = mask_amt; 788 } 789 } 790 cur_vit_mask -= 100; 791 } 792 793 tmp_mask = (mask_m[46] << 30) | (mask_m[47] << 28) 794 | (mask_m[48] << 26) | (mask_m[49] << 24) 795 | (mask_m[50] << 22) | (mask_m[51] << 20) 796 | (mask_m[52] << 18) | (mask_m[53] << 16) 797 | (mask_m[54] << 14) | (mask_m[55] << 12) 798 | (mask_m[56] << 10) | (mask_m[57] << 8) 799 | (mask_m[58] << 6) | (mask_m[59] << 4) 800 | (mask_m[60] << 2) | (mask_m[61] << 0); 801 OS_REG_WRITE(ah, AR_PHY_BIN_MASK_1, tmp_mask); 802 OS_REG_WRITE(ah, AR_PHY_VIT_MASK2_M_46_61, tmp_mask); 803 804 tmp_mask = (mask_m[31] << 28) 805 | (mask_m[32] << 26) | (mask_m[33] << 24) 806 | (mask_m[34] << 22) | (mask_m[35] << 20) 807 | (mask_m[36] << 18) | (mask_m[37] << 16) 808 | (mask_m[48] << 14) | (mask_m[39] << 12) 809 | (mask_m[40] << 10) | (mask_m[41] << 8) 810 | (mask_m[42] << 6) | (mask_m[43] << 4) 811 | (mask_m[44] << 2) | (mask_m[45] << 0); 812 OS_REG_WRITE(ah, AR_PHY_BIN_MASK_2, tmp_mask); 813 OS_REG_WRITE(ah, AR_PHY_MASK2_M_31_45, tmp_mask); 814 815 tmp_mask = (mask_m[16] << 30) | (mask_m[16] << 28) 816 | (mask_m[18] << 26) | (mask_m[18] << 24) 817 | (mask_m[20] << 22) | (mask_m[20] << 20) 818 | (mask_m[22] << 18) | (mask_m[22] << 16) 819 | (mask_m[24] << 14) | (mask_m[24] << 12) 820 | (mask_m[25] << 10) | (mask_m[26] << 8) 821 | (mask_m[27] << 6) | (mask_m[28] << 4) 822 | (mask_m[29] << 2) | (mask_m[30] << 0); 823 OS_REG_WRITE(ah, AR_PHY_BIN_MASK_3, tmp_mask); 824 OS_REG_WRITE(ah, AR_PHY_MASK2_M_16_30, tmp_mask); 825 826 tmp_mask = (mask_m[ 0] << 30) | (mask_m[ 1] << 28) 827 | (mask_m[ 2] << 26) | (mask_m[ 3] << 24) 828 | (mask_m[ 4] << 22) | (mask_m[ 5] << 20) 829 | (mask_m[ 6] << 18) | (mask_m[ 7] << 16) 830 | (mask_m[ 8] << 14) | (mask_m[ 9] << 12) 831 | (mask_m[10] << 10) | (mask_m[11] << 8) 832 | (mask_m[12] << 6) | (mask_m[13] << 4) 833 | (mask_m[14] << 2) | (mask_m[15] << 0); 834 OS_REG_WRITE(ah, AR_PHY_MASK_CTL, tmp_mask); 835 OS_REG_WRITE(ah, AR_PHY_MASK2_M_00_15, tmp_mask); 836 837 tmp_mask = (mask_p[15] << 28) 838 | (mask_p[14] << 26) | (mask_p[13] << 24) 839 | (mask_p[12] << 22) | (mask_p[11] << 20) 840 | (mask_p[10] << 18) | (mask_p[ 9] << 16) 841 | (mask_p[ 8] << 14) | (mask_p[ 7] << 12) 842 | (mask_p[ 6] << 10) | (mask_p[ 5] << 8) 843 | (mask_p[ 4] << 6) | (mask_p[ 3] << 4) 844 | (mask_p[ 2] << 2) | (mask_p[ 1] << 0); 845 OS_REG_WRITE(ah, AR_PHY_BIN_MASK2_1, tmp_mask); 846 OS_REG_WRITE(ah, AR_PHY_MASK2_P_15_01, tmp_mask); 847 848 tmp_mask = (mask_p[30] << 28) 849 | (mask_p[29] << 26) | (mask_p[28] << 24) 850 | (mask_p[27] << 22) | (mask_p[26] << 20) 851 | (mask_p[25] << 18) | (mask_p[24] << 16) 852 | (mask_p[23] << 14) | (mask_p[22] << 12) 853 | (mask_p[21] << 10) | (mask_p[20] << 8) 854 | (mask_p[19] << 6) | (mask_p[18] << 4) 855 | (mask_p[17] << 2) | (mask_p[16] << 0); 856 OS_REG_WRITE(ah, AR_PHY_BIN_MASK2_2, tmp_mask); 857 OS_REG_WRITE(ah, AR_PHY_MASK2_P_30_16, tmp_mask); 858 859 tmp_mask = (mask_p[45] << 28) 860 | (mask_p[44] << 26) | (mask_p[43] << 24) 861 | (mask_p[42] << 22) | (mask_p[41] << 20) 862 | (mask_p[40] << 18) | (mask_p[39] << 16) 863 | (mask_p[38] << 14) | (mask_p[37] << 12) 864 | (mask_p[36] << 10) | (mask_p[35] << 8) 865 | (mask_p[34] << 6) | (mask_p[33] << 4) 866 | (mask_p[32] << 2) | (mask_p[31] << 0); 867 OS_REG_WRITE(ah, AR_PHY_BIN_MASK2_3, tmp_mask); 868 OS_REG_WRITE(ah, AR_PHY_MASK2_P_45_31, tmp_mask); 869 870 tmp_mask = (mask_p[61] << 30) | (mask_p[60] << 28) 871 | (mask_p[59] << 26) | (mask_p[58] << 24) 872 | (mask_p[57] << 22) | (mask_p[56] << 20) 873 | (mask_p[55] << 18) | (mask_p[54] << 16) 874 | (mask_p[53] << 14) | (mask_p[52] << 12) 875 | (mask_p[51] << 10) | (mask_p[50] << 8) 876 | (mask_p[49] << 6) | (mask_p[48] << 4) 877 | (mask_p[47] << 2) | (mask_p[46] << 0); 878 OS_REG_WRITE(ah, AR_PHY_BIN_MASK2_4, tmp_mask); 879 OS_REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask); 880 881 OS_REG_WRITE_BUFFER_FLUSH(ah); 882 OS_REG_WRITE_BUFFER_DISABLE(ah); 883 } 884 885 /* 886 * Fill all software cached or static hardware state information. 887 * Return failure if capabilities are to come from EEPROM and 888 * cannot be read. 889 */ 890 HAL_BOOL 891 ar5416FillCapabilityInfo(struct ath_hal *ah) 892 { 893 struct ath_hal_private *ahpriv = AH_PRIVATE(ah); 894 HAL_CAPABILITIES *pCap = &ahpriv->ah_caps; 895 uint16_t val; 896 897 /* Construct wireless mode from EEPROM */ 898 pCap->halWirelessModes = 0; 899 if (ath_hal_eepromGetFlag(ah, AR_EEP_AMODE)) { 900 pCap->halWirelessModes |= HAL_MODE_11A 901 | HAL_MODE_11NA_HT20 902 | HAL_MODE_11NA_HT40PLUS 903 | HAL_MODE_11NA_HT40MINUS 904 ; 905 } 906 if (ath_hal_eepromGetFlag(ah, AR_EEP_GMODE)) { 907 pCap->halWirelessModes |= HAL_MODE_11G 908 | HAL_MODE_11NG_HT20 909 | HAL_MODE_11NG_HT40PLUS 910 | HAL_MODE_11NG_HT40MINUS 911 ; 912 pCap->halWirelessModes |= HAL_MODE_11A 913 | HAL_MODE_11NA_HT20 914 | HAL_MODE_11NA_HT40PLUS 915 | HAL_MODE_11NA_HT40MINUS 916 ; 917 } 918 919 pCap->halLow2GhzChan = 2312; 920 pCap->halHigh2GhzChan = 2732; 921 922 pCap->halLow5GhzChan = 4915; 923 pCap->halHigh5GhzChan = 6100; 924 925 pCap->halCipherCkipSupport = AH_FALSE; 926 pCap->halCipherTkipSupport = AH_TRUE; 927 pCap->halCipherAesCcmSupport = ath_hal_eepromGetFlag(ah, AR_EEP_AES); 928 929 pCap->halMicCkipSupport = AH_FALSE; 930 pCap->halMicTkipSupport = AH_TRUE; 931 pCap->halMicAesCcmSupport = ath_hal_eepromGetFlag(ah, AR_EEP_AES); 932 /* 933 * Starting with Griffin TX+RX mic keys can be combined 934 * in one key cache slot. 935 */ 936 pCap->halTkipMicTxRxKeySupport = AH_TRUE; 937 pCap->halChanSpreadSupport = AH_TRUE; 938 pCap->halSleepAfterBeaconBroken = AH_TRUE; 939 940 pCap->halCompressSupport = AH_FALSE; 941 pCap->halBurstSupport = AH_TRUE; 942 pCap->halFastFramesSupport = AH_TRUE; 943 pCap->halChapTuningSupport = AH_TRUE; 944 pCap->halTurboPrimeSupport = AH_TRUE; 945 946 pCap->halTurboGSupport = pCap->halWirelessModes & HAL_MODE_108G; 947 948 pCap->halPSPollBroken = AH_TRUE; /* XXX fixed in later revs? */ 949 pCap->halNumMRRetries = 4; /* Hardware supports 4 MRR */ 950 pCap->halNumTxMaps = 1; /* Single TX ptr per descr */ 951 pCap->halVEOLSupport = AH_TRUE; 952 pCap->halBssIdMaskSupport = AH_TRUE; 953 pCap->halMcastKeySrchSupport = AH_TRUE; /* Works on AR5416 and later */ 954 pCap->halTsfAddSupport = AH_TRUE; 955 pCap->hal4AddrAggrSupport = AH_FALSE; /* Broken in Owl */ 956 pCap->halSpectralScanSupport = AH_FALSE; /* AR9280 and later */ 957 958 if (ath_hal_eepromGet(ah, AR_EEP_MAXQCU, &val) == HAL_OK) 959 pCap->halTotalQueues = val; 960 else 961 pCap->halTotalQueues = HAL_NUM_TX_QUEUES; 962 963 if (ath_hal_eepromGet(ah, AR_EEP_KCENTRIES, &val) == HAL_OK) 964 pCap->halKeyCacheSize = val; 965 else 966 pCap->halKeyCacheSize = AR5416_KEYTABLE_SIZE; 967 968 /* XXX Which chips? */ 969 pCap->halChanHalfRate = AH_TRUE; 970 pCap->halChanQuarterRate = AH_TRUE; 971 972 pCap->halTxTstampPrecision = 32; 973 pCap->halRxTstampPrecision = 32; 974 pCap->halHwPhyCounterSupport = AH_TRUE; 975 pCap->halIntrMask = HAL_INT_COMMON 976 | HAL_INT_RX 977 | HAL_INT_TX 978 | HAL_INT_FATAL 979 | HAL_INT_BNR 980 | HAL_INT_BMISC 981 | HAL_INT_DTIMSYNC 982 | HAL_INT_TSFOOR 983 | HAL_INT_CST 984 | HAL_INT_GTT 985 ; 986 987 pCap->halFastCCSupport = AH_TRUE; 988 pCap->halNumGpioPins = 14; 989 pCap->halWowSupport = AH_FALSE; 990 pCap->halWowMatchPatternExact = AH_FALSE; 991 pCap->halBtCoexSupport = AH_FALSE; /* XXX need support */ 992 pCap->halAutoSleepSupport = AH_FALSE; 993 pCap->hal4kbSplitTransSupport = AH_TRUE; 994 /* Disable this so Block-ACK works correctly */ 995 pCap->halHasRxSelfLinkedTail = AH_FALSE; 996 #if 0 /* XXX not yet */ 997 pCap->halNumAntCfg2GHz = ar5416GetNumAntConfig(ahp, HAL_FREQ_BAND_2GHZ); 998 pCap->halNumAntCfg5GHz = ar5416GetNumAntConfig(ahp, HAL_FREQ_BAND_5GHZ); 999 #endif 1000 pCap->halHTSupport = AH_TRUE; 1001 pCap->halTxChainMask = ath_hal_eepromGet(ah, AR_EEP_TXMASK, AH_NULL); 1002 /* XXX CB71 uses GPIO 0 to indicate 3 rx chains */ 1003 pCap->halRxChainMask = ath_hal_eepromGet(ah, AR_EEP_RXMASK, AH_NULL); 1004 /* AR5416 may have 3 antennas but is a 2x2 stream device */ 1005 pCap->halTxStreams = 2; 1006 pCap->halRxStreams = 2; 1007 1008 /* 1009 * If the TX or RX chainmask has less than 2 chains active, 1010 * mark it as a 1-stream device for the relevant stream. 1011 */ 1012 if (owl_get_ntxchains(pCap->halTxChainMask) == 1) 1013 pCap->halTxStreams = 1; 1014 /* XXX Eww */ 1015 if (owl_get_ntxchains(pCap->halRxChainMask) == 1) 1016 pCap->halRxStreams = 1; 1017 pCap->halRtsAggrLimit = 8*1024; /* Owl 2.0 limit */ 1018 pCap->halMbssidAggrSupport = AH_FALSE; /* Broken on Owl */ 1019 pCap->halForcePpmSupport = AH_TRUE; 1020 pCap->halEnhancedPmSupport = AH_TRUE; 1021 pCap->halBssidMatchSupport = AH_TRUE; 1022 pCap->halGTTSupport = AH_TRUE; 1023 pCap->halCSTSupport = AH_TRUE; 1024 pCap->halEnhancedDfsSupport = AH_FALSE; 1025 /* 1026 * BB Read WAR: this is only for AR5008/AR9001 NICs 1027 * It is also set individually in the AR91xx attach functions. 1028 */ 1029 if (AR_SREV_OWL(ah)) 1030 pCap->halHasBBReadWar = AH_TRUE; 1031 1032 if (ath_hal_eepromGetFlag(ah, AR_EEP_RFKILL) && 1033 ath_hal_eepromGet(ah, AR_EEP_RFSILENT, &ahpriv->ah_rfsilent) == HAL_OK) { 1034 /* NB: enabled by default */ 1035 ahpriv->ah_rfkillEnabled = AH_TRUE; 1036 pCap->halRfSilentSupport = AH_TRUE; 1037 } 1038 1039 /* 1040 * The MAC will mark frames as RXed if there's a descriptor 1041 * to write them to. So if it hits a self-linked final descriptor, 1042 * it'll keep ACKing frames even though they're being silently 1043 * dropped. Thus, this particular feature of the driver can't 1044 * be used for 802.11n devices. 1045 */ 1046 ahpriv->ah_rxornIsFatal = AH_FALSE; 1047 1048 /* 1049 * If it's a PCI NIC, ask the HAL OS layer to serialise 1050 * register access, or SMP machines may cause the hardware 1051 * to hang. This is applicable to AR5416 and AR9220; I'm not 1052 * sure about AR9160 or AR9227. 1053 */ 1054 if (! AH_PRIVATE(ah)->ah_ispcie) 1055 pCap->halSerialiseRegWar = 1; 1056 1057 /* 1058 * AR5416 and later NICs support MYBEACON filtering. 1059 */ 1060 pCap->halRxDoMyBeacon = AH_TRUE; 1061 1062 return AH_TRUE; 1063 } 1064 1065 static const char* 1066 ar5416Probe(uint16_t vendorid, uint16_t devid) 1067 { 1068 if (vendorid == ATHEROS_VENDOR_ID) { 1069 if (devid == AR5416_DEVID_PCI) 1070 return "Atheros 5416"; 1071 if (devid == AR5416_DEVID_PCIE) 1072 return "Atheros 5418"; 1073 } 1074 return AH_NULL; 1075 } 1076 AH_CHIP(AR5416, ar5416Probe, ar5416Attach); 1077