1 /*- 2 * SPDX-License-Identifier: ISC 3 * 4 * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting 5 * Copyright (c) 2002-2008 Atheros Communications, Inc. 6 * 7 * Permission to use, copy, modify, and/or distribute this software for any 8 * purpose with or without fee is hereby granted, provided that the above 9 * copyright notice and this permission notice appear in all copies. 10 * 11 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 12 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 13 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 14 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 15 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 16 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 17 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 18 */ 19 #include "opt_ah.h" 20 21 #ifdef AH_SUPPORT_AR5312 22 23 #include "ah.h" 24 #include "ah_internal.h" 25 #include "ah_devid.h" 26 27 #include "ar5312/ar5312.h" 28 #include "ar5312/ar5312reg.h" 29 #include "ar5312/ar5312phy.h" 30 31 #include "ah_eeprom_v3.h" 32 33 /* Additional Time delay to wait after activiting the Base band */ 34 #define BASE_ACTIVATE_DELAY 100 /* 100 usec */ 35 #define PLL_SETTLE_DELAY 300 /* 300 usec */ 36 37 extern int16_t ar5212GetNf(struct ath_hal *, const struct ieee80211_channel *); 38 extern void ar5212SetRateDurationTable(struct ath_hal *, 39 const struct ieee80211_channel *); 40 extern HAL_BOOL ar5212SetTransmitPower(struct ath_hal *ah, 41 const struct ieee80211_channel *chan, uint16_t *rfXpdGain); 42 extern void ar5212SetDeltaSlope(struct ath_hal *, 43 const struct ieee80211_channel *); 44 extern HAL_BOOL ar5212SetBoardValues(struct ath_hal *, 45 const struct ieee80211_channel *); 46 extern void ar5212SetIFSTiming(struct ath_hal *, 47 const struct ieee80211_channel *); 48 extern HAL_BOOL ar5212IsSpurChannel(struct ath_hal *, 49 const struct ieee80211_channel *); 50 extern HAL_BOOL ar5212ChannelChange(struct ath_hal *, 51 const struct ieee80211_channel *); 52 53 static HAL_BOOL ar5312SetResetReg(struct ath_hal *, uint32_t resetMask); 54 55 static int 56 write_common(struct ath_hal *ah, const HAL_INI_ARRAY *ia, 57 HAL_BOOL bChannelChange, int writes) 58 { 59 #define IS_NO_RESET_TIMER_ADDR(x) \ 60 ( (((x) >= AR_BEACON) && ((x) <= AR_CFP_DUR)) || \ 61 (((x) >= AR_SLEEP1) && ((x) <= AR_SLEEP3))) 62 #define V(r, c) (ia)->data[((r)*(ia)->cols) + (c)] 63 int i; 64 65 /* Write Common Array Parameters */ 66 for (i = 0; i < ia->rows; i++) { 67 uint32_t reg = V(i, 0); 68 /* XXX timer/beacon setup registers? */ 69 /* On channel change, don't reset the PCU registers */ 70 if (!(bChannelChange && IS_NO_RESET_TIMER_ADDR(reg))) { 71 OS_REG_WRITE(ah, reg, V(i, 1)); 72 DMA_YIELD(writes); 73 } 74 } 75 return writes; 76 #undef IS_NO_RESET_TIMER_ADDR 77 #undef V 78 } 79 80 /* 81 * Places the device in and out of reset and then places sane 82 * values in the registers based on EEPROM config, initialization 83 * vectors (as determined by the mode), and station configuration 84 * 85 * bChannelChange is used to preserve DMA/PCU registers across 86 * a HW Reset during channel change. 87 */ 88 HAL_BOOL 89 ar5312Reset(struct ath_hal *ah, HAL_OPMODE opmode, 90 struct ieee80211_channel *chan, 91 HAL_BOOL bChannelChange, 92 HAL_RESET_TYPE resetType, 93 HAL_STATUS *status) 94 { 95 #define N(a) (sizeof (a) / sizeof (a[0])) 96 #define FAIL(_code) do { ecode = _code; goto bad; } while (0) 97 struct ath_hal_5212 *ahp = AH5212(ah); 98 HAL_CHANNEL_INTERNAL *ichan; 99 const HAL_EEPROM *ee; 100 uint32_t saveFrameSeqCount, saveDefAntenna; 101 uint32_t macStaId1, synthDelay, txFrm2TxDStart; 102 uint16_t rfXpdGain[MAX_NUM_PDGAINS_PER_CHANNEL]; 103 int16_t cckOfdmPwrDelta = 0; 104 u_int modesIndex, freqIndex; 105 HAL_STATUS ecode; 106 int i, regWrites = 0; 107 uint32_t testReg; 108 uint32_t saveLedState = 0; 109 110 HALASSERT(ah->ah_magic == AR5212_MAGIC); 111 ee = AH_PRIVATE(ah)->ah_eeprom; 112 113 OS_MARK(ah, AH_MARK_RESET, bChannelChange); 114 /* 115 * Map public channel to private. 116 */ 117 ichan = ath_hal_checkchannel(ah, chan); 118 if (ichan == AH_NULL) { 119 HALDEBUG(ah, HAL_DEBUG_ANY, 120 "%s: invalid channel %u/0x%x; no mapping\n", 121 __func__, chan->ic_freq, chan->ic_flags); 122 FAIL(HAL_EINVAL); 123 } 124 switch (opmode) { 125 case HAL_M_STA: 126 case HAL_M_IBSS: 127 case HAL_M_HOSTAP: 128 case HAL_M_MONITOR: 129 break; 130 default: 131 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: invalid operating mode %u\n", 132 __func__, opmode); 133 FAIL(HAL_EINVAL); 134 break; 135 } 136 HALASSERT(ahp->ah_eeversion >= AR_EEPROM_VER3); 137 138 /* Preserve certain DMA hardware registers on a channel change */ 139 if (bChannelChange) { 140 /* 141 * On Venice, the TSF is almost preserved across a reset; 142 * it requires the doubling writes to the RESET_TSF 143 * bit in the AR_BEACON register; it also has the quirk 144 * of the TSF going back in time on the station (station 145 * latches onto the last beacon's tsf during a reset 50% 146 * of the times); the latter is not a problem for adhoc 147 * stations since as long as the TSF is behind, it will 148 * get resynchronized on receiving the next beacon; the 149 * TSF going backwards in time could be a problem for the 150 * sleep operation (supported on infrastructure stations 151 * only) - the best and most general fix for this situation 152 * is to resynchronize the various sleep/beacon timers on 153 * the receipt of the next beacon i.e. when the TSF itself 154 * gets resynchronized to the AP's TSF - power save is 155 * needed to be temporarily disabled until that time 156 * 157 * Need to save the sequence number to restore it after 158 * the reset! 159 */ 160 saveFrameSeqCount = OS_REG_READ(ah, AR_D_SEQNUM); 161 } else 162 saveFrameSeqCount = 0; /* NB: silence compiler */ 163 164 /* If the channel change is across the same mode - perform a fast channel change */ 165 if ((IS_2413(ah) || IS_5413(ah))) { 166 /* 167 * Channel change can only be used when: 168 * -channel change requested - so it's not the initial reset. 169 * -it's not a change to the current channel - often called when switching modes 170 * on a channel 171 * -the modes of the previous and requested channel are the same - some ugly code for XR 172 */ 173 if (bChannelChange && 174 AH_PRIVATE(ah)->ah_curchan != AH_NULL && 175 (chan->ic_freq != AH_PRIVATE(ah)->ah_curchan->ic_freq) && 176 ((chan->ic_flags & IEEE80211_CHAN_ALLTURBO) == 177 (AH_PRIVATE(ah)->ah_curchan->ic_flags & IEEE80211_CHAN_ALLTURBO))) { 178 if (ar5212ChannelChange(ah, chan)) 179 /* If ChannelChange completed - skip the rest of reset */ 180 return AH_TRUE; 181 } 182 } 183 184 /* 185 * Preserve the antenna on a channel change 186 */ 187 saveDefAntenna = OS_REG_READ(ah, AR_DEF_ANTENNA); 188 if (saveDefAntenna == 0) /* XXX magic constants */ 189 saveDefAntenna = 1; 190 191 /* Save hardware flag before chip reset clears the register */ 192 macStaId1 = OS_REG_READ(ah, AR_STA_ID1) & 193 (AR_STA_ID1_BASE_RATE_11B | AR_STA_ID1_USE_DEFANT); 194 195 /* Save led state from pci config register */ 196 if (!IS_5315(ah)) 197 saveLedState = OS_REG_READ(ah, AR5312_PCICFG) & 198 (AR_PCICFG_LEDCTL | AR_PCICFG_LEDMODE | AR_PCICFG_LEDBLINK | 199 AR_PCICFG_LEDSLOW); 200 201 ar5312RestoreClock(ah, opmode); /* move to refclk operation */ 202 203 /* 204 * Adjust gain parameters before reset if 205 * there's an outstanding gain updated. 206 */ 207 (void) ar5212GetRfgain(ah); 208 209 if (!ar5312ChipReset(ah, chan)) { 210 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: chip reset failed\n", __func__); 211 FAIL(HAL_EIO); 212 } 213 214 /* Setup the indices for the next set of register array writes */ 215 if (IEEE80211_IS_CHAN_2GHZ(chan)) { 216 freqIndex = 2; 217 modesIndex = IEEE80211_IS_CHAN_108G(chan) ? 5 : 218 IEEE80211_IS_CHAN_G(chan) ? 4 : 3; 219 } else { 220 freqIndex = 1; 221 modesIndex = IEEE80211_IS_CHAN_ST(chan) ? 2 : 1; 222 } 223 224 OS_MARK(ah, AH_MARK_RESET_LINE, __LINE__); 225 226 /* Set correct Baseband to analog shift setting to access analog chips. */ 227 OS_REG_WRITE(ah, AR_PHY(0), 0x00000007); 228 229 regWrites = ath_hal_ini_write(ah, &ahp->ah_ini_modes, modesIndex, 0); 230 regWrites = write_common(ah, &ahp->ah_ini_common, bChannelChange, 231 regWrites); 232 ahp->ah_rfHal->writeRegs(ah, modesIndex, freqIndex, regWrites); 233 234 OS_MARK(ah, AH_MARK_RESET_LINE, __LINE__); 235 236 if (IEEE80211_IS_CHAN_HALF(chan) || IEEE80211_IS_CHAN_QUARTER(chan)) 237 ar5212SetIFSTiming(ah, chan); 238 239 /* Overwrite INI values for revised chipsets */ 240 if (AH_PRIVATE(ah)->ah_phyRev >= AR_PHY_CHIP_ID_REV_2) { 241 /* ADC_CTL */ 242 OS_REG_WRITE(ah, AR_PHY_ADC_CTL, 243 SM(2, AR_PHY_ADC_CTL_OFF_INBUFGAIN) | 244 SM(2, AR_PHY_ADC_CTL_ON_INBUFGAIN) | 245 AR_PHY_ADC_CTL_OFF_PWDDAC | 246 AR_PHY_ADC_CTL_OFF_PWDADC); 247 248 /* TX_PWR_ADJ */ 249 if (chan->channel == 2484) { 250 cckOfdmPwrDelta = SCALE_OC_DELTA(ee->ee_cckOfdmPwrDelta - ee->ee_scaledCh14FilterCckDelta); 251 } else { 252 cckOfdmPwrDelta = SCALE_OC_DELTA(ee->ee_cckOfdmPwrDelta); 253 } 254 255 if (IEEE80211_IS_CHAN_G(chan)) { 256 OS_REG_WRITE(ah, AR_PHY_TXPWRADJ, 257 SM((ee->ee_cckOfdmPwrDelta*-1), AR_PHY_TXPWRADJ_CCK_GAIN_DELTA) | 258 SM((cckOfdmPwrDelta*-1), AR_PHY_TXPWRADJ_CCK_PCDAC_INDEX)); 259 } else { 260 OS_REG_WRITE(ah, AR_PHY_TXPWRADJ, 0); 261 } 262 263 /* Add barker RSSI thresh enable as disabled */ 264 OS_REG_CLR_BIT(ah, AR_PHY_DAG_CTRLCCK, 265 AR_PHY_DAG_CTRLCCK_EN_RSSI_THR); 266 OS_REG_RMW_FIELD(ah, AR_PHY_DAG_CTRLCCK, 267 AR_PHY_DAG_CTRLCCK_RSSI_THR, 2); 268 269 /* Set the mute mask to the correct default */ 270 OS_REG_WRITE(ah, AR_SEQ_MASK, 0x0000000F); 271 } 272 273 if (AH_PRIVATE(ah)->ah_phyRev >= AR_PHY_CHIP_ID_REV_3) { 274 /* Clear reg to alllow RX_CLEAR line debug */ 275 OS_REG_WRITE(ah, AR_PHY_BLUETOOTH, 0); 276 } 277 if (AH_PRIVATE(ah)->ah_phyRev >= AR_PHY_CHIP_ID_REV_4) { 278 #ifdef notyet 279 /* Enable burst prefetch for the data queues */ 280 OS_REG_RMW_FIELD(ah, AR_D_FPCTL, ... ); 281 /* Enable double-buffering */ 282 OS_REG_CLR_BIT(ah, AR_TXCFG, AR_TXCFG_DBL_BUF_DIS); 283 #endif 284 } 285 286 if (IS_5312_2_X(ah)) { 287 /* ADC_CTRL */ 288 OS_REG_WRITE(ah, AR_PHY_SIGMA_DELTA, 289 SM(2, AR_PHY_SIGMA_DELTA_ADC_SEL) | 290 SM(4, AR_PHY_SIGMA_DELTA_FILT2) | 291 SM(0x16, AR_PHY_SIGMA_DELTA_FILT1) | 292 SM(0, AR_PHY_SIGMA_DELTA_ADC_CLIP)); 293 294 if (IEEE80211_IS_CHAN_2GHZ(chan)) 295 OS_REG_RMW_FIELD(ah, AR_PHY_RXGAIN, AR_PHY_RXGAIN_TXRX_RF_MAX, 0x0F); 296 297 /* CCK Short parameter adjustment in 11B mode */ 298 if (IEEE80211_IS_CHAN_B(chan)) 299 OS_REG_RMW_FIELD(ah, AR_PHY_CCK_RXCTRL4, AR_PHY_CCK_RXCTRL4_FREQ_EST_SHORT, 12); 300 301 /* Set ADC/DAC select values */ 302 OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL, 0x04); 303 304 /* Increase 11A AGC Settling */ 305 if (IEEE80211_IS_CHAN_A(chan)) 306 OS_REG_RMW_FIELD(ah, AR_PHY_SETTLING, AR_PHY_SETTLING_AGC, 32); 307 } else { 308 /* Set ADC/DAC select values */ 309 OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL, 0x0e); 310 } 311 312 /* Setup the transmit power values. */ 313 if (!ar5212SetTransmitPower(ah, chan, rfXpdGain)) { 314 HALDEBUG(ah, HAL_DEBUG_ANY, 315 "%s: error init'ing transmit power\n", __func__); 316 FAIL(HAL_EIO); 317 } 318 319 /* Write the analog registers */ 320 if (!ahp->ah_rfHal->setRfRegs(ah, chan, modesIndex, rfXpdGain)) { 321 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: ar5212SetRfRegs failed\n", 322 __func__); 323 FAIL(HAL_EIO); 324 } 325 326 /* Write delta slope for OFDM enabled modes (A, G, Turbo) */ 327 if (IEEE80211_IS_CHAN_OFDM(chan)) { 328 if (IS_5413(ah) || 329 AH_PRIVATE(ah)->ah_eeversion >= AR_EEPROM_VER5_3) 330 ar5212SetSpurMitigation(ah, chan); 331 ar5212SetDeltaSlope(ah, chan); 332 } 333 334 /* Setup board specific options for EEPROM version 3 */ 335 if (!ar5212SetBoardValues(ah, chan)) { 336 HALDEBUG(ah, HAL_DEBUG_ANY, 337 "%s: error setting board options\n", __func__); 338 FAIL(HAL_EIO); 339 } 340 341 /* Restore certain DMA hardware registers on a channel change */ 342 if (bChannelChange) 343 OS_REG_WRITE(ah, AR_D_SEQNUM, saveFrameSeqCount); 344 345 OS_MARK(ah, AH_MARK_RESET_LINE, __LINE__); 346 347 OS_REG_WRITE(ah, AR_STA_ID0, LE_READ_4(ahp->ah_macaddr)); 348 OS_REG_WRITE(ah, AR_STA_ID1, LE_READ_2(ahp->ah_macaddr + 4) 349 | macStaId1 350 | AR_STA_ID1_RTS_USE_DEF 351 | ahp->ah_staId1Defaults 352 ); 353 ar5212SetOperatingMode(ah, opmode); 354 355 /* Set Venice BSSID mask according to current state */ 356 OS_REG_WRITE(ah, AR_BSSMSKL, LE_READ_4(ahp->ah_bssidmask)); 357 OS_REG_WRITE(ah, AR_BSSMSKU, LE_READ_2(ahp->ah_bssidmask + 4)); 358 359 /* Restore previous led state */ 360 if (!IS_5315(ah)) 361 OS_REG_WRITE(ah, AR5312_PCICFG, OS_REG_READ(ah, AR_PCICFG) | saveLedState); 362 363 /* Restore previous antenna */ 364 OS_REG_WRITE(ah, AR_DEF_ANTENNA, saveDefAntenna); 365 366 /* then our BSSID */ 367 OS_REG_WRITE(ah, AR_BSS_ID0, LE_READ_4(ahp->ah_bssid)); 368 OS_REG_WRITE(ah, AR_BSS_ID1, LE_READ_2(ahp->ah_bssid + 4)); 369 370 /* Restore bmiss rssi & count thresholds */ 371 OS_REG_WRITE(ah, AR_RSSI_THR, ahp->ah_rssiThr); 372 373 OS_REG_WRITE(ah, AR_ISR, ~0); /* cleared on write */ 374 375 if (!ar5212SetChannel(ah, chan)) 376 FAIL(HAL_EIO); 377 378 OS_MARK(ah, AH_MARK_RESET_LINE, __LINE__); 379 380 ar5212SetCoverageClass(ah, AH_PRIVATE(ah)->ah_coverageClass, 1); 381 382 ar5212SetRateDurationTable(ah, chan); 383 384 /* Set Tx frame start to tx data start delay */ 385 if (IS_RAD5112_ANY(ah) && 386 (IEEE80211_IS_CHAN_HALF(chan) || IEEE80211_IS_CHAN_QUARTER(chan))) { 387 txFrm2TxDStart = 388 IEEE80211_IS_CHAN_HALF(chan) ? 389 TX_FRAME_D_START_HALF_RATE: 390 TX_FRAME_D_START_QUARTER_RATE; 391 OS_REG_RMW_FIELD(ah, AR_PHY_TX_CTL, 392 AR_PHY_TX_FRAME_TO_TX_DATA_START, txFrm2TxDStart); 393 } 394 395 /* 396 * Setup fast diversity. 397 * Fast diversity can be enabled or disabled via regadd.txt. 398 * Default is enabled. 399 * For reference, 400 * Disable: reg val 401 * 0x00009860 0x00009d18 (if 11a / 11g, else no change) 402 * 0x00009970 0x192bb514 403 * 0x0000a208 0xd03e4648 404 * 405 * Enable: 0x00009860 0x00009d10 (if 11a / 11g, else no change) 406 * 0x00009970 0x192fb514 407 * 0x0000a208 0xd03e6788 408 */ 409 410 /* XXX Setup pre PHY ENABLE EAR additions */ 411 412 /* flush SCAL reg */ 413 if (IS_5312_2_X(ah)) { 414 (void) OS_REG_READ(ah, AR_PHY_SLEEP_SCAL); 415 } 416 417 /* 418 * Wait for the frequency synth to settle (synth goes on 419 * via AR_PHY_ACTIVE_EN). Read the phy active delay register. 420 * Value is in 100ns increments. 421 */ 422 synthDelay = OS_REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY; 423 if (IEEE80211_IS_CHAN_B(chan)) { 424 synthDelay = (4 * synthDelay) / 22; 425 } else { 426 synthDelay /= 10; 427 } 428 429 /* Activate the PHY (includes baseband activate and synthesizer on) */ 430 OS_REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN); 431 432 /* 433 * There is an issue if the AP starts the calibration before 434 * the base band timeout completes. This could result in the 435 * rx_clear false triggering. As a workaround we add delay an 436 * extra BASE_ACTIVATE_DELAY usecs to ensure this condition 437 * does not happen. 438 */ 439 if (IEEE80211_IS_CHAN_HALF(chan)) { 440 OS_DELAY((synthDelay << 1) + BASE_ACTIVATE_DELAY); 441 } else if (IEEE80211_IS_CHAN_QUARTER(chan)) { 442 OS_DELAY((synthDelay << 2) + BASE_ACTIVATE_DELAY); 443 } else { 444 OS_DELAY(synthDelay + BASE_ACTIVATE_DELAY); 445 } 446 447 /* 448 * The udelay method is not reliable with notebooks. 449 * Need to check to see if the baseband is ready 450 */ 451 testReg = OS_REG_READ(ah, AR_PHY_TESTCTRL); 452 /* Selects the Tx hold */ 453 OS_REG_WRITE(ah, AR_PHY_TESTCTRL, AR_PHY_TESTCTRL_TXHOLD); 454 i = 0; 455 while ((i++ < 20) && 456 (OS_REG_READ(ah, 0x9c24) & 0x10)) /* test if baseband not ready */ OS_DELAY(200); 457 OS_REG_WRITE(ah, AR_PHY_TESTCTRL, testReg); 458 459 /* Calibrate the AGC and start a NF calculation */ 460 OS_REG_WRITE(ah, AR_PHY_AGC_CONTROL, 461 OS_REG_READ(ah, AR_PHY_AGC_CONTROL) 462 | AR_PHY_AGC_CONTROL_CAL 463 | AR_PHY_AGC_CONTROL_NF); 464 465 if (!IEEE80211_IS_CHAN_B(chan) && ahp->ah_bIQCalibration != IQ_CAL_DONE) { 466 /* Start IQ calibration w/ 2^(INIT_IQCAL_LOG_COUNT_MAX+1) samples */ 467 OS_REG_RMW_FIELD(ah, AR_PHY_TIMING_CTRL4, 468 AR_PHY_TIMING_CTRL4_IQCAL_LOG_COUNT_MAX, 469 INIT_IQCAL_LOG_COUNT_MAX); 470 OS_REG_SET_BIT(ah, AR_PHY_TIMING_CTRL4, 471 AR_PHY_TIMING_CTRL4_DO_IQCAL); 472 ahp->ah_bIQCalibration = IQ_CAL_RUNNING; 473 } else 474 ahp->ah_bIQCalibration = IQ_CAL_INACTIVE; 475 476 /* Setup compression registers */ 477 ar5212SetCompRegs(ah); 478 479 /* Set 1:1 QCU to DCU mapping for all queues */ 480 for (i = 0; i < AR_NUM_DCU; i++) 481 OS_REG_WRITE(ah, AR_DQCUMASK(i), 1 << i); 482 483 ahp->ah_intrTxqs = 0; 484 for (i = 0; i < AH_PRIVATE(ah)->ah_caps.halTotalQueues; i++) 485 ar5212ResetTxQueue(ah, i); 486 487 /* 488 * Setup interrupt handling. Note that ar5212ResetTxQueue 489 * manipulates the secondary IMR's as queues are enabled 490 * and disabled. This is done with RMW ops to insure the 491 * settings we make here are preserved. 492 */ 493 ahp->ah_maskReg = AR_IMR_TXOK | AR_IMR_TXERR | AR_IMR_TXURN 494 | AR_IMR_RXOK | AR_IMR_RXERR | AR_IMR_RXORN 495 | AR_IMR_HIUERR 496 ; 497 if (opmode == HAL_M_HOSTAP) 498 ahp->ah_maskReg |= AR_IMR_MIB; 499 OS_REG_WRITE(ah, AR_IMR, ahp->ah_maskReg); 500 /* Enable bus errors that are OR'd to set the HIUERR bit */ 501 OS_REG_WRITE(ah, AR_IMR_S2, 502 OS_REG_READ(ah, AR_IMR_S2) 503 | AR_IMR_S2_MCABT | AR_IMR_S2_SSERR | AR_IMR_S2_DPERR); 504 505 if (AH_PRIVATE(ah)->ah_rfkillEnabled) 506 ar5212EnableRfKill(ah); 507 508 if (!ath_hal_wait(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_CAL, 0)) { 509 HALDEBUG(ah, HAL_DEBUG_ANY, 510 "%s: offset calibration failed to complete in 1ms;" 511 " noisy environment?\n", __func__); 512 } 513 514 /* 515 * Set clocks back to 32kHz if they had been using refClk, then 516 * use an external 32kHz crystal when sleeping, if one exists. 517 */ 518 ar5312SetupClock(ah, opmode); 519 520 /* 521 * Writing to AR_BEACON will start timers. Hence it should 522 * be the last register to be written. Do not reset tsf, do 523 * not enable beacons at this point, but preserve other values 524 * like beaconInterval. 525 */ 526 OS_REG_WRITE(ah, AR_BEACON, 527 (OS_REG_READ(ah, AR_BEACON) &~ (AR_BEACON_EN | AR_BEACON_RESET_TSF))); 528 529 /* XXX Setup post reset EAR additions */ 530 531 /* QoS support */ 532 if (AH_PRIVATE(ah)->ah_macVersion > AR_SREV_VERSION_VENICE || 533 (AH_PRIVATE(ah)->ah_macVersion == AR_SREV_VERSION_VENICE && 534 AH_PRIVATE(ah)->ah_macRev >= AR_SREV_GRIFFIN_LITE)) { 535 OS_REG_WRITE(ah, AR_QOS_CONTROL, 0x100aa); /* XXX magic */ 536 OS_REG_WRITE(ah, AR_QOS_SELECT, 0x3210); /* XXX magic */ 537 } 538 539 /* Turn on NOACK Support for QoS packets */ 540 OS_REG_WRITE(ah, AR_NOACK, 541 SM(2, AR_NOACK_2BIT_VALUE) | 542 SM(5, AR_NOACK_BIT_OFFSET) | 543 SM(0, AR_NOACK_BYTE_OFFSET)); 544 545 /* Restore user-specified settings */ 546 if (ahp->ah_miscMode != 0) 547 OS_REG_WRITE(ah, AR_MISC_MODE, ahp->ah_miscMode); 548 if (ahp->ah_slottime != (u_int) -1) 549 ar5212SetSlotTime(ah, ahp->ah_slottime); 550 if (ahp->ah_acktimeout != (u_int) -1) 551 ar5212SetAckTimeout(ah, ahp->ah_acktimeout); 552 if (ahp->ah_ctstimeout != (u_int) -1) 553 ar5212SetCTSTimeout(ah, ahp->ah_ctstimeout); 554 if (ahp->ah_sifstime != (u_int) -1) 555 ar5212SetSifsTime(ah, ahp->ah_sifstime); 556 if (AH_PRIVATE(ah)->ah_diagreg != 0) 557 OS_REG_WRITE(ah, AR_DIAG_SW, AH_PRIVATE(ah)->ah_diagreg); 558 559 AH_PRIVATE(ah)->ah_opmode = opmode; /* record operating mode */ 560 561 if (bChannelChange && !IEEE80211_IS_CHAN_DFS(chan)) 562 chan->ic_state &= ~IEEE80211_CHANSTATE_CWINT; 563 564 HALDEBUG(ah, HAL_DEBUG_RESET, "%s: done\n", __func__); 565 566 OS_MARK(ah, AH_MARK_RESET_DONE, 0); 567 568 return AH_TRUE; 569 bad: 570 OS_MARK(ah, AH_MARK_RESET_DONE, ecode); 571 if (status != AH_NULL) 572 *status = ecode; 573 return AH_FALSE; 574 #undef FAIL 575 #undef N 576 } 577 578 /* 579 * Places the PHY and Radio chips into reset. A full reset 580 * must be called to leave this state. The PCI/MAC/PCU are 581 * not placed into reset as we must receive interrupt to 582 * re-enable the hardware. 583 */ 584 HAL_BOOL 585 ar5312PhyDisable(struct ath_hal *ah) 586 { 587 return ar5312SetResetReg(ah, AR_RC_BB); 588 } 589 590 /* 591 * Places all of hardware into reset 592 */ 593 HAL_BOOL 594 ar5312Disable(struct ath_hal *ah) 595 { 596 if (!ar5312SetPowerMode(ah, HAL_PM_AWAKE, AH_TRUE)) 597 return AH_FALSE; 598 /* 599 * Reset the HW - PCI must be reset after the rest of the 600 * device has been reset. 601 */ 602 return ar5312SetResetReg(ah, AR_RC_MAC | AR_RC_BB); 603 } 604 605 /* 606 * Places the hardware into reset and then pulls it out of reset 607 * 608 * TODO: Only write the PLL if we're changing to or from CCK mode 609 * 610 * WARNING: The order of the PLL and mode registers must be correct. 611 */ 612 HAL_BOOL 613 ar5312ChipReset(struct ath_hal *ah, const struct ieee80211_channel *chan) 614 { 615 616 OS_MARK(ah, AH_MARK_CHIPRESET, chan ? chan->ic_freq : 0); 617 618 /* 619 * Reset the HW 620 */ 621 if (!ar5312SetResetReg(ah, AR_RC_MAC | AR_RC_BB)) { 622 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: ar5312SetResetReg failed\n", 623 __func__); 624 return AH_FALSE; 625 } 626 627 /* Bring out of sleep mode (AGAIN) */ 628 if (!ar5312SetPowerMode(ah, HAL_PM_AWAKE, AH_TRUE)) { 629 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: ar5312SetPowerMode failed\n", 630 __func__); 631 return AH_FALSE; 632 } 633 634 /* Clear warm reset register */ 635 if (!ar5312SetResetReg(ah, 0)) { 636 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: ar5312SetResetReg failed\n", 637 __func__); 638 return AH_FALSE; 639 } 640 641 /* 642 * Perform warm reset before the mode/PLL/turbo registers 643 * are changed in order to deactivate the radio. Mode changes 644 * with an active radio can result in corrupted shifts to the 645 * radio device. 646 */ 647 648 /* 649 * Set CCK and Turbo modes correctly. 650 */ 651 if (chan != AH_NULL) { /* NB: can be null during attach */ 652 uint32_t rfMode, phyPLL = 0, curPhyPLL, turbo; 653 654 if (IS_RAD5112_ANY(ah)) { 655 rfMode = AR_PHY_MODE_AR5112; 656 if (!IS_5315(ah)) { 657 if (IEEE80211_IS_CHAN_CCK(chan)) { 658 phyPLL = AR_PHY_PLL_CTL_44_5312; 659 } else { 660 if (IEEE80211_IS_CHAN_HALF(chan)) { 661 phyPLL = AR_PHY_PLL_CTL_40_5312_HALF; 662 } else if (IEEE80211_IS_CHAN_QUARTER(chan)) { 663 phyPLL = AR_PHY_PLL_CTL_40_5312_QUARTER; 664 } else { 665 phyPLL = AR_PHY_PLL_CTL_40_5312; 666 } 667 } 668 } else { 669 if (IEEE80211_IS_CHAN_CCK(chan)) 670 phyPLL = AR_PHY_PLL_CTL_44_5112; 671 else 672 phyPLL = AR_PHY_PLL_CTL_40_5112; 673 if (IEEE80211_IS_CHAN_HALF(chan)) 674 phyPLL |= AR_PHY_PLL_CTL_HALF; 675 else if (IEEE80211_IS_CHAN_QUARTER(chan)) 676 phyPLL |= AR_PHY_PLL_CTL_QUARTER; 677 } 678 } else { 679 rfMode = AR_PHY_MODE_AR5111; 680 if (IEEE80211_IS_CHAN_CCK(chan)) 681 phyPLL = AR_PHY_PLL_CTL_44; 682 else 683 phyPLL = AR_PHY_PLL_CTL_40; 684 if (IEEE80211_IS_CHAN_HALF(chan)) 685 phyPLL = AR_PHY_PLL_CTL_HALF; 686 else if (IEEE80211_IS_CHAN_QUARTER(chan)) 687 phyPLL = AR_PHY_PLL_CTL_QUARTER; 688 } 689 if (IEEE80211_IS_CHAN_G(chan)) 690 rfMode |= AR_PHY_MODE_DYNAMIC; 691 else if (IEEE80211_IS_CHAN_OFDM(chan)) 692 rfMode |= AR_PHY_MODE_OFDM; 693 else 694 rfMode |= AR_PHY_MODE_CCK; 695 if (IEEE80211_IS_CHAN_5GHZ(chan)) 696 rfMode |= AR_PHY_MODE_RF5GHZ; 697 else 698 rfMode |= AR_PHY_MODE_RF2GHZ; 699 turbo = IEEE80211_IS_CHAN_TURBO(chan) ? 700 (AR_PHY_FC_TURBO_MODE | AR_PHY_FC_TURBO_SHORT) : 0; 701 curPhyPLL = OS_REG_READ(ah, AR_PHY_PLL_CTL); 702 /* 703 * PLL, Mode, and Turbo values must be written in the correct 704 * order to ensure: 705 * - The PLL cannot be set to 44 unless the CCK or DYNAMIC 706 * mode bit is set 707 * - Turbo cannot be set at the same time as CCK or DYNAMIC 708 */ 709 if (IEEE80211_IS_CHAN_CCK(chan)) { 710 OS_REG_WRITE(ah, AR_PHY_TURBO, turbo); 711 OS_REG_WRITE(ah, AR_PHY_MODE, rfMode); 712 if (curPhyPLL != phyPLL) { 713 OS_REG_WRITE(ah, AR_PHY_PLL_CTL, phyPLL); 714 /* Wait for the PLL to settle */ 715 OS_DELAY(PLL_SETTLE_DELAY); 716 } 717 } else { 718 if (curPhyPLL != phyPLL) { 719 OS_REG_WRITE(ah, AR_PHY_PLL_CTL, phyPLL); 720 /* Wait for the PLL to settle */ 721 OS_DELAY(PLL_SETTLE_DELAY); 722 } 723 OS_REG_WRITE(ah, AR_PHY_TURBO, turbo); 724 OS_REG_WRITE(ah, AR_PHY_MODE, rfMode); 725 } 726 } 727 return AH_TRUE; 728 } 729 730 /* 731 * Write the given reset bit mask into the reset register 732 */ 733 static HAL_BOOL 734 ar5312SetResetReg(struct ath_hal *ah, uint32_t resetMask) 735 { 736 uint32_t mask = resetMask ? resetMask : ~0; 737 HAL_BOOL rt; 738 739 if ((rt = ar5312MacReset(ah, mask)) == AH_FALSE) { 740 return rt; 741 } 742 if ((resetMask & AR_RC_MAC) == 0) { 743 if (isBigEndian()) { 744 /* 745 * Set CFG, little-endian for descriptor accesses. 746 */ 747 #ifdef AH_NEED_DESC_SWAP 748 mask = INIT_CONFIG_STATUS | AR_CFG_SWRD; 749 #else 750 mask = INIT_CONFIG_STATUS | 751 AR_CFG_SWTD | AR_CFG_SWRD; 752 #endif 753 OS_REG_WRITE(ah, AR_CFG, mask); 754 } else 755 OS_REG_WRITE(ah, AR_CFG, INIT_CONFIG_STATUS); 756 } 757 return rt; 758 } 759 760 /* 761 * ar5312MacReset resets (and then un-resets) the specified 762 * wireless components. 763 * Note: The RCMask cannot be zero on entering from ar5312SetResetReg. 764 */ 765 766 HAL_BOOL 767 ar5312MacReset(struct ath_hal *ah, unsigned int RCMask) 768 { 769 int wlanNum = AR5312_UNIT(ah); 770 uint32_t resetBB, resetBits, regMask; 771 uint32_t reg; 772 773 if (RCMask == 0) 774 return(AH_FALSE); 775 #if ( AH_SUPPORT_2316 || AH_SUPPORT_2317 ) 776 if (IS_5315(ah)) { 777 switch(wlanNum) { 778 case 0: 779 resetBB = AR5315_RC_BB0_CRES | AR5315_RC_WBB0_RES; 780 /* Warm and cold reset bits for wbb */ 781 resetBits = AR5315_RC_WMAC0_RES; 782 break; 783 case 1: 784 resetBB = AR5315_RC_BB1_CRES | AR5315_RC_WBB1_RES; 785 /* Warm and cold reset bits for wbb */ 786 resetBits = AR5315_RC_WMAC1_RES; 787 break; 788 default: 789 return(AH_FALSE); 790 } 791 regMask = ~(resetBB | resetBits); 792 793 /* read before */ 794 reg = OS_REG_READ(ah, 795 (AR5315_RSTIMER_BASE - ((uint32_t) ah->ah_sh) + AR5315_RESET)); 796 797 if (RCMask == AR_RC_BB) { 798 /* Put baseband in reset */ 799 reg |= resetBB; /* Cold and warm reset the baseband bits */ 800 } else { 801 /* 802 * Reset the MAC and baseband. This is a bit different than 803 * the PCI version, but holding in reset causes problems. 804 */ 805 reg &= regMask; 806 reg |= (resetBits | resetBB) ; 807 } 808 OS_REG_WRITE(ah, 809 (AR5315_RSTIMER_BASE - ((uint32_t) ah->ah_sh)+AR5315_RESET), 810 reg); 811 /* read after */ 812 OS_REG_READ(ah, 813 (AR5315_RSTIMER_BASE - ((uint32_t) ah->ah_sh) +AR5315_RESET)); 814 OS_DELAY(100); 815 816 /* Bring MAC and baseband out of reset */ 817 reg &= regMask; 818 /* read before */ 819 OS_REG_READ(ah, 820 (AR5315_RSTIMER_BASE- ((uint32_t) ah->ah_sh) +AR5315_RESET)); 821 OS_REG_WRITE(ah, 822 (AR5315_RSTIMER_BASE - ((uint32_t) ah->ah_sh)+AR5315_RESET), 823 reg); 824 /* read after */ 825 OS_REG_READ(ah, 826 (AR5315_RSTIMER_BASE- ((uint32_t) ah->ah_sh) +AR5315_RESET)); 827 828 } 829 else 830 #endif 831 { 832 switch(wlanNum) { 833 case 0: 834 resetBB = AR5312_RC_BB0_CRES | AR5312_RC_WBB0_RES; 835 /* Warm and cold reset bits for wbb */ 836 resetBits = AR5312_RC_WMAC0_RES; 837 break; 838 case 1: 839 resetBB = AR5312_RC_BB1_CRES | AR5312_RC_WBB1_RES; 840 /* Warm and cold reset bits for wbb */ 841 resetBits = AR5312_RC_WMAC1_RES; 842 break; 843 default: 844 return(AH_FALSE); 845 } 846 regMask = ~(resetBB | resetBits); 847 848 /* read before */ 849 reg = OS_REG_READ(ah, 850 (AR5312_RSTIMER_BASE - ((uint32_t) ah->ah_sh) + AR5312_RESET)); 851 852 if (RCMask == AR_RC_BB) { 853 /* Put baseband in reset */ 854 reg |= resetBB; /* Cold and warm reset the baseband bits */ 855 } else { 856 /* 857 * Reset the MAC and baseband. This is a bit different than 858 * the PCI version, but holding in reset causes problems. 859 */ 860 reg &= regMask; 861 reg |= (resetBits | resetBB) ; 862 } 863 OS_REG_WRITE(ah, 864 (AR5312_RSTIMER_BASE - ((uint32_t) ah->ah_sh)+AR5312_RESET), 865 reg); 866 /* read after */ 867 OS_REG_READ(ah, 868 (AR5312_RSTIMER_BASE - ((uint32_t) ah->ah_sh) +AR5312_RESET)); 869 OS_DELAY(100); 870 871 /* Bring MAC and baseband out of reset */ 872 reg &= regMask; 873 /* read before */ 874 OS_REG_READ(ah, 875 (AR5312_RSTIMER_BASE- ((uint32_t) ah->ah_sh) +AR5312_RESET)); 876 OS_REG_WRITE(ah, 877 (AR5312_RSTIMER_BASE - ((uint32_t) ah->ah_sh)+AR5312_RESET), 878 reg); 879 /* read after */ 880 OS_REG_READ(ah, 881 (AR5312_RSTIMER_BASE- ((uint32_t) ah->ah_sh) +AR5312_RESET)); 882 } 883 return(AH_TRUE); 884 } 885 886 #endif /* AH_SUPPORT_AR5312 */ 887