xref: /freebsd/sys/dev/ath/ath_hal/ar5312/ar5312_attach.c (revision 5ca8e32633c4ffbbcd6762e5888b6a4ba0708c6c)
1 /*-
2  * SPDX-License-Identifier: ISC
3  *
4  * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting
5  * Copyright (c) 2002-2008 Atheros Communications, Inc.
6  *
7  * Permission to use, copy, modify, and/or distribute this software for any
8  * purpose with or without fee is hereby granted, provided that the above
9  * copyright notice and this permission notice appear in all copies.
10  *
11  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
12  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
13  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
14  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
15  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
16  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
17  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
18  */
19 #include "opt_ah.h"
20 
21 #include "ah.h"
22 #include "ah_internal.h"
23 #include "ah_devid.h"
24 
25 #include "ar5312/ar5312.h"
26 #include "ar5312/ar5312reg.h"
27 #include "ar5312/ar5312phy.h"
28 
29 /* Add static register initialization vectors */
30 #define AH_5212_COMMON
31 #include "ar5212/ar5212.ini"
32 
33 static  HAL_BOOL ar5312GetMacAddr(struct ath_hal *ah);
34 
35 static void
36 ar5312AniSetup(struct ath_hal *ah)
37 {
38 	static const struct ar5212AniParams aniparams = {
39 		.maxNoiseImmunityLevel	= 4,	/* levels 0..4 */
40 		.totalSizeDesired	= { -41, -41, -48, -48, -48 },
41 		.coarseHigh		= { -18, -18, -16, -14, -12 },
42 		.coarseLow		= { -56, -56, -60, -60, -60 },
43 		.firpwr			= { -72, -72, -75, -78, -80 },
44 		.maxSpurImmunityLevel	= 2,
45 		.cycPwrThr1		= { 2, 4, 6 },
46 		.maxFirstepLevel	= 2,	/* levels 0..2 */
47 		.firstep		= { 0, 4, 8 },
48 		.ofdmTrigHigh		= 500,
49 		.ofdmTrigLow		= 200,
50 		.cckTrigHigh		= 200,
51 		.cckTrigLow		= 100,
52 		.rssiThrHigh		= 40,
53 		.rssiThrLow		= 7,
54 		.period			= 100,
55 	};
56 	ar5212AniAttach(ah, &aniparams, &aniparams, AH_TRUE);
57 }
58 
59 /*
60  * Attach for an AR5312 part.
61  */
62 static struct ath_hal *
63 ar5312Attach(uint16_t devid, HAL_SOFTC sc,
64 	HAL_BUS_TAG st, HAL_BUS_HANDLE sh, uint16_t *eepromdata,
65 	HAL_OPS_CONFIG *ah_config, HAL_STATUS *status)
66 {
67 	struct ath_hal_5212 *ahp = AH_NULL;
68 	struct ath_hal *ah;
69 	struct ath_hal_rf *rf;
70 	uint32_t val;
71 	uint16_t eeval;
72 	HAL_STATUS ecode;
73 
74 	HALDEBUG(AH_NULL, HAL_DEBUG_ATTACH, "%s: sc %p st %p sh %p\n",
75 		 __func__, sc, st, (void*) sh);
76 
77 	/* NB: memory is returned zero'd */
78 	ahp = ath_hal_malloc(sizeof (struct ath_hal_5212));
79 	if (ahp == AH_NULL) {
80 		HALDEBUG(AH_NULL, HAL_DEBUG_ANY,
81 		    "%s: cannot allocate memory for state block\n", __func__);
82 		*status = HAL_ENOMEM;
83 		return AH_NULL;
84 	}
85 	ar5212InitState(ahp, devid, sc, st, sh, status);
86 	ah = &ahp->ah_priv.h;
87 
88 	/* override 5212 methods for our needs */
89 	ah->ah_reset			= ar5312Reset;
90 	ah->ah_phyDisable		= ar5312PhyDisable;
91 	ah->ah_setLedState		= ar5312SetLedState;
92 	ah->ah_detectCardPresent	= ar5312DetectCardPresent;
93 	ah->ah_setPowerMode		= ar5312SetPowerMode;
94 	ah->ah_getPowerMode		= ar5312GetPowerMode;
95 	ah->ah_isInterruptPending	= ar5312IsInterruptPending;
96 
97 	ahp->ah_priv.ah_eepromRead	= ar5312EepromRead;
98 #ifdef AH_SUPPORT_WRITE_EEPROM
99 	ahp->ah_priv.ah_eepromWrite	= ar5312EepromWrite;
100 #endif
101 #if ( AH_SUPPORT_2316 || AH_SUPPORT_2317)
102 	if (IS_5315(ah)) {
103 		ahp->ah_priv.ah_gpioCfgOutput	= ar5315GpioCfgOutput;
104 		ahp->ah_priv.ah_gpioCfgInput	= ar5315GpioCfgInput;
105 		ahp->ah_priv.ah_gpioGet		= ar5315GpioGet;
106 		ahp->ah_priv.ah_gpioSet		= ar5315GpioSet;
107 		ahp->ah_priv.ah_gpioSetIntr	= ar5315GpioSetIntr;
108 	} else
109 #endif
110 	{
111 		ahp->ah_priv.ah_gpioCfgOutput	= ar5312GpioCfgOutput;
112 		ahp->ah_priv.ah_gpioCfgInput	= ar5312GpioCfgInput;
113 		ahp->ah_priv.ah_gpioGet		= ar5312GpioGet;
114 		ahp->ah_priv.ah_gpioSet		= ar5312GpioSet;
115 		ahp->ah_priv.ah_gpioSetIntr	= ar5312GpioSetIntr;
116 	}
117 
118 	ah->ah_gpioCfgInput		= ahp->ah_priv.ah_gpioCfgInput;
119 	ah->ah_gpioCfgOutput		= ahp->ah_priv.ah_gpioCfgOutput;
120 	ah->ah_gpioGet			= ahp->ah_priv.ah_gpioGet;
121 	ah->ah_gpioSet			= ahp->ah_priv.ah_gpioSet;
122 	ah->ah_gpioSetIntr		= ahp->ah_priv.ah_gpioSetIntr;
123 
124 	/* setup common ini data; rf backends handle remainder */
125 	HAL_INI_INIT(&ahp->ah_ini_modes, ar5212Modes, 6);
126 	HAL_INI_INIT(&ahp->ah_ini_common, ar5212Common, 2);
127 
128 	if (!ar5312ChipReset(ah, AH_NULL)) {	/* reset chip */
129 		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: chip reset failed\n", __func__);
130 		ecode = HAL_EIO;
131 		goto bad;
132 	}
133 
134 #if ( AH_SUPPORT_2316 || AH_SUPPORT_2317)
135 	if ((devid == AR5212_AR2315_REV6) ||
136 	    (devid == AR5212_AR2315_REV7) ||
137 	    (devid == AR5212_AR2317_REV1) ||
138 	    (devid == AR5212_AR2317_REV2) ) {
139 		val = ((OS_REG_READ(ah, (AR5315_RSTIMER_BASE -((uint32_t) sh)) + AR5315_WREV)) >> AR5315_WREV_S)
140 			& AR5315_WREV_ID;
141 		AH_PRIVATE(ah)->ah_macVersion = val >> AR5315_WREV_ID_S;
142 		AH_PRIVATE(ah)->ah_macRev = val & AR5315_WREV_REVISION;
143 		HALDEBUG(ah, HAL_DEBUG_ATTACH,
144 		    "%s: Mac Chip Rev 0x%02x.%x\n" , __func__,
145 		    AH_PRIVATE(ah)->ah_macVersion, AH_PRIVATE(ah)->ah_macRev);
146 	} else
147 #endif
148 	{
149 		val = OS_REG_READ(ah, (AR5312_RSTIMER_BASE - ((uint32_t) sh)) + 0x0020);
150 		val = OS_REG_READ(ah, (AR5312_RSTIMER_BASE - ((uint32_t) sh)) + 0x0080);
151 		/* Read Revisions from Chips */
152 		val = ((OS_REG_READ(ah, (AR5312_RSTIMER_BASE - ((uint32_t) sh)) + AR5312_WREV)) >> AR5312_WREV_S) & AR5312_WREV_ID;
153 		AH_PRIVATE(ah)->ah_macVersion = val >> AR5312_WREV_ID_S;
154 		AH_PRIVATE(ah)->ah_macRev = val & AR5312_WREV_REVISION;
155 	}
156 	/* XXX - THIS IS WRONG. NEEDS TO BE FIXED */
157 	if (((AH_PRIVATE(ah)->ah_macVersion != AR_SREV_VERSION_VENICE &&
158               AH_PRIVATE(ah)->ah_macVersion != AR_SREV_VERSION_VENICE) ||
159              AH_PRIVATE(ah)->ah_macRev < AR_SREV_D2PLUS) &&
160               AH_PRIVATE(ah)->ah_macVersion != AR_SREV_VERSION_COBRA) {
161 #ifdef AH_DEBUG
162 		ath_hal_printf(ah, "%s: Mac Chip Rev 0x%02x.%x is not supported by "
163                          "this driver\n", __func__,
164                          AH_PRIVATE(ah)->ah_macVersion,
165                          AH_PRIVATE(ah)->ah_macRev);
166 #endif
167 		ecode = HAL_ENOTSUPP;
168 		goto bad;
169 	}
170 
171 	AH_PRIVATE(ah)->ah_phyRev = OS_REG_READ(ah, AR_PHY_CHIP_ID);
172 
173 	if (!ar5212ChipTest(ah)) {
174 		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: hardware self-test failed\n",
175 		    __func__);
176 		ecode = HAL_ESELFTEST;
177 		goto bad;
178 	}
179 
180 	/*
181 	 * Set correct Baseband to analog shift
182 	 * setting to access analog chips.
183 	 */
184 	OS_REG_WRITE(ah, AR_PHY(0), 0x00000007);
185 
186 	/* Read Radio Chip Rev Extract */
187 	AH_PRIVATE(ah)->ah_analog5GhzRev = ar5212GetRadioRev(ah);
188 
189 	rf = ath_hal_rfprobe(ah, &ecode);
190 	if (rf == AH_NULL)
191 		goto bad;
192 	if (IS_RAD5112(ah) && !IS_RADX112_REV2(ah)) {
193 #ifdef AH_DEBUG
194 		ath_hal_printf(ah, "%s: 5112 Rev 1 is not supported by this "
195                          "driver (analog5GhzRev 0x%x)\n", __func__,
196                          AH_PRIVATE(ah)->ah_analog5GhzRev);
197 #endif
198 		ecode = HAL_ENOTSUPP;
199 		goto bad;
200 	}
201 
202 	ecode = ath_hal_legacyEepromAttach(ah);
203 	if (ecode != HAL_OK) {
204 		goto bad;
205 	}
206 
207 	/*
208 	 * If Bmode and AR5212, verify 2.4 analog exists
209 	 */
210 	if (ath_hal_eepromGetFlag(ah, AR_EEP_BMODE) &&
211 	    (AH_PRIVATE(ah)->ah_analog5GhzRev & 0xF0) == AR_RAD5111_SREV_MAJOR) {
212 		/*
213 		 * Set correct Baseband to analog shift
214 		 * setting to access analog chips.
215 		 */
216 		OS_REG_WRITE(ah, AR_PHY(0), 0x00004007);
217 		OS_DELAY(2000);
218 		AH_PRIVATE(ah)->ah_analog2GhzRev = ar5212GetRadioRev(ah);
219 
220 		/* Set baseband for 5GHz chip */
221 		OS_REG_WRITE(ah, AR_PHY(0), 0x00000007);
222 		OS_DELAY(2000);
223 		if ((AH_PRIVATE(ah)->ah_analog2GhzRev & 0xF0) != AR_RAD2111_SREV_MAJOR) {
224 #ifdef AH_DEBUG
225 			ath_hal_printf(ah, "%s: 2G Radio Chip Rev 0x%02X is not "
226 				"supported by this driver\n", __func__,
227 				AH_PRIVATE(ah)->ah_analog2GhzRev);
228 #endif
229 			ecode = HAL_ENOTSUPP;
230 			goto bad;
231 		}
232 	}
233 
234 	ecode = ath_hal_eepromGet(ah, AR_EEP_REGDMN_0, &eeval);
235 	if (ecode != HAL_OK) {
236 		HALDEBUG(ah, HAL_DEBUG_ANY,
237 		    "%s: cannot read regulatory domain from EEPROM\n",
238 		    __func__);
239 		goto bad;
240         }
241 	AH_PRIVATE(ah)->ah_currentRD = eeval;
242 	/* XXX record serial number */
243 
244 	/* XXX other capabilities */
245 	/*
246 	 * Got everything we need now to setup the capabilities.
247 	 */
248 	if (!ar5212FillCapabilityInfo(ah)) {
249 		HALDEBUG(ah, HAL_DEBUG_ANY,
250 		    "%s: failed ar5212FillCapabilityInfo\n", __func__);
251 		ecode = HAL_EEREAD;
252 		goto bad;
253 	}
254 
255 	if (!rf->attach(ah, &ecode)) {
256 		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: RF setup failed, status %u\n",
257 		    __func__, ecode);
258 		goto bad;
259 	}
260 	/* arrange a direct call instead of thunking */
261 	AH_PRIVATE(ah)->ah_getNfAdjust = ahp->ah_rfHal->getNfAdjust;
262 
263 	/* Initialize gain ladder thermal calibration structure */
264 	ar5212InitializeGainValues(ah);
265 
266         /* BSP specific call for MAC address of this WMAC device */
267         if (!ar5312GetMacAddr(ah)) {
268                 ecode = HAL_EEBADMAC;
269                 goto bad;
270         }
271 
272 	ar5312AniSetup(ah);
273 	ar5212InitNfCalHistBuffer(ah);
274 
275 	/* XXX EAR stuff goes here */
276 	return ah;
277 
278 bad:
279 	if (ahp)
280 		ar5212Detach((struct ath_hal *) ahp);
281 	if (status)
282 		*status = ecode;
283 	return AH_NULL;
284 }
285 
286 static HAL_BOOL
287 ar5312GetMacAddr(struct ath_hal *ah)
288 {
289 	const struct ar531x_boarddata *board = AR5312_BOARDCONFIG(ah);
290         int wlanNum = AR5312_UNIT(ah);
291         const uint8_t *macAddr;
292 
293 	switch (wlanNum) {
294 	case 0:
295 		macAddr = board->wlan0Mac;
296 		break;
297 	case 1:
298 		macAddr = board->wlan1Mac;
299 		break;
300 	default:
301 #ifdef AH_DEBUG
302 		ath_hal_printf(ah, "Invalid WLAN wmac index (%d)\n",
303 			       wlanNum);
304 #endif
305 		return AH_FALSE;
306 	}
307 	OS_MEMCPY(AH5212(ah)->ah_macaddr, macAddr, 6);
308 	return AH_TRUE;
309 }
310 
311 static const char*
312 ar5312Probe(uint16_t vendorid, uint16_t devid)
313 {
314 	if (vendorid == ATHEROS_VENDOR_ID) {
315 		switch (devid) {
316 		case AR5212_AR5312_REV2:
317 		case AR5212_AR5312_REV7:
318 			return "Atheros 5312 WiSoC";
319 		case AR5212_AR2313_REV8:
320 			return "Atheros 2313 WiSoC";
321 		case AR5212_AR2315_REV6:
322 		case AR5212_AR2315_REV7:
323 			return "Atheros 2315 WiSoC";
324 		case AR5212_AR2317_REV1:
325 		case AR5212_AR2317_REV2:
326 			return "Atheros 2317 WiSoC";
327 		case AR5212_AR2413:
328 			return "Atheros 2413";
329 		case AR5212_AR2417:
330 			return "Atheros 2417";
331 		}
332 	}
333 	return AH_NULL;
334 }
335 AH_CHIP(AR5312, ar5312Probe, ar5312Attach);
336