xref: /freebsd/sys/dev/ath/ath_hal/ar5212/ar5212_misc.c (revision b1f9167f94059fd55c630891d359bcff987bd7eb)
1 /*
2  * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
3  * Copyright (c) 2002-2008 Atheros Communications, Inc.
4  *
5  * Permission to use, copy, modify, and/or distribute this software for any
6  * purpose with or without fee is hereby granted, provided that the above
7  * copyright notice and this permission notice appear in all copies.
8  *
9  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16  *
17  * $FreeBSD$
18  */
19 #include "opt_ah.h"
20 
21 #include "ah.h"
22 #include "ah_internal.h"
23 #include "ah_devid.h"
24 #include "ah_desc.h"			/* NB: for HAL_PHYERR* */
25 
26 #include "ar5212/ar5212.h"
27 #include "ar5212/ar5212reg.h"
28 #include "ar5212/ar5212phy.h"
29 
30 #include "ah_eeprom_v3.h"
31 
32 #define	AR_NUM_GPIO	6		/* 6 GPIO pins */
33 #define	AR_GPIOD_MASK	0x0000002F	/* GPIO data reg r/w mask */
34 
35 void
36 ar5212GetMacAddress(struct ath_hal *ah, uint8_t *mac)
37 {
38 	struct ath_hal_5212 *ahp = AH5212(ah);
39 
40 	OS_MEMCPY(mac, ahp->ah_macaddr, IEEE80211_ADDR_LEN);
41 }
42 
43 HAL_BOOL
44 ar5212SetMacAddress(struct ath_hal *ah, const uint8_t *mac)
45 {
46 	struct ath_hal_5212 *ahp = AH5212(ah);
47 
48 	OS_MEMCPY(ahp->ah_macaddr, mac, IEEE80211_ADDR_LEN);
49 	return AH_TRUE;
50 }
51 
52 void
53 ar5212GetBssIdMask(struct ath_hal *ah, uint8_t *mask)
54 {
55 	struct ath_hal_5212 *ahp = AH5212(ah);
56 
57 	OS_MEMCPY(mask, ahp->ah_bssidmask, IEEE80211_ADDR_LEN);
58 }
59 
60 HAL_BOOL
61 ar5212SetBssIdMask(struct ath_hal *ah, const uint8_t *mask)
62 {
63 	struct ath_hal_5212 *ahp = AH5212(ah);
64 
65 	/* save it since it must be rewritten on reset */
66 	OS_MEMCPY(ahp->ah_bssidmask, mask, IEEE80211_ADDR_LEN);
67 
68 	OS_REG_WRITE(ah, AR_BSSMSKL, LE_READ_4(ahp->ah_bssidmask));
69 	OS_REG_WRITE(ah, AR_BSSMSKU, LE_READ_2(ahp->ah_bssidmask + 4));
70 	return AH_TRUE;
71 }
72 
73 /*
74  * Attempt to change the cards operating regulatory domain to the given value
75  */
76 HAL_BOOL
77 ar5212SetRegulatoryDomain(struct ath_hal *ah,
78 	uint16_t regDomain, HAL_STATUS *status)
79 {
80 	HAL_STATUS ecode;
81 
82 	if (AH_PRIVATE(ah)->ah_currentRD == regDomain) {
83 		ecode = HAL_EINVAL;
84 		goto bad;
85 	}
86 	if (ath_hal_eepromGetFlag(ah, AR_EEP_WRITEPROTECT)) {
87 		ecode = HAL_EEWRITE;
88 		goto bad;
89 	}
90 #ifdef AH_SUPPORT_WRITE_REGDOMAIN
91 	if (ath_hal_eepromWrite(ah, AR_EEPROM_REG_DOMAIN, regDomain)) {
92 		HALDEBUG(ah, HAL_DEBUG_ANY,
93 		    "%s: set regulatory domain to %u (0x%x)\n",
94 		    __func__, regDomain, regDomain);
95 		AH_PRIVATE(ah)->ah_currentRD = regDomain;
96 		return AH_TRUE;
97 	}
98 #endif
99 	ecode = HAL_EIO;
100 bad:
101 	if (status)
102 		*status = ecode;
103 	return AH_FALSE;
104 }
105 
106 /*
107  * Return the wireless modes (a,b,g,t) supported by hardware.
108  *
109  * This value is what is actually supported by the hardware
110  * and is unaffected by regulatory/country code settings.
111  */
112 u_int
113 ar5212GetWirelessModes(struct ath_hal *ah)
114 {
115 	u_int mode = 0;
116 
117 	if (ath_hal_eepromGetFlag(ah, AR_EEP_AMODE)) {
118 		mode = HAL_MODE_11A;
119 		if (!ath_hal_eepromGetFlag(ah, AR_EEP_TURBO5DISABLE))
120 			mode |= HAL_MODE_TURBO | HAL_MODE_108A;
121 		if (AH_PRIVATE(ah)->ah_caps.halChanHalfRate)
122 			mode |= HAL_MODE_11A_HALF_RATE;
123 		if (AH_PRIVATE(ah)->ah_caps.halChanQuarterRate)
124 			mode |= HAL_MODE_11A_QUARTER_RATE;
125 	}
126 	if (ath_hal_eepromGetFlag(ah, AR_EEP_BMODE))
127 		mode |= HAL_MODE_11B;
128 	if (ath_hal_eepromGetFlag(ah, AR_EEP_GMODE) &&
129 	    AH_PRIVATE(ah)->ah_subvendorid != AR_SUBVENDOR_ID_NOG) {
130 		mode |= HAL_MODE_11G;
131 		if (!ath_hal_eepromGetFlag(ah, AR_EEP_TURBO2DISABLE))
132 			mode |= HAL_MODE_108G;
133 		if (AH_PRIVATE(ah)->ah_caps.halChanHalfRate)
134 			mode |= HAL_MODE_11G_HALF_RATE;
135 		if (AH_PRIVATE(ah)->ah_caps.halChanQuarterRate)
136 			mode |= HAL_MODE_11G_QUARTER_RATE;
137 	}
138 	return mode;
139 }
140 
141 /*
142  * Set the interrupt and GPIO values so the ISR can disable RF
143  * on a switch signal.  Assumes GPIO port and interrupt polarity
144  * are set prior to call.
145  */
146 void
147 ar5212EnableRfKill(struct ath_hal *ah)
148 {
149 	uint16_t rfsilent = AH_PRIVATE(ah)->ah_rfsilent;
150 	int select = MS(rfsilent, AR_EEPROM_RFSILENT_GPIO_SEL);
151 	int polarity = MS(rfsilent, AR_EEPROM_RFSILENT_POLARITY);
152 
153 	/*
154 	 * Configure the desired GPIO port for input
155 	 * and enable baseband rf silence.
156 	 */
157 	ath_hal_gpioCfgInput(ah, select);
158 	OS_REG_SET_BIT(ah, AR_PHY(0), 0x00002000);
159 	/*
160 	 * If radio disable switch connection to GPIO bit x is enabled
161 	 * program GPIO interrupt.
162 	 * If rfkill bit on eeprom is 1, setupeeprommap routine has already
163 	 * verified that it is a later version of eeprom, it has a place for
164 	 * rfkill bit and it is set to 1, indicating that GPIO bit x hardware
165 	 * connection is present.
166 	 */
167 	ath_hal_gpioSetIntr(ah, select,
168 	    (ath_hal_gpioGet(ah, select) == polarity ? !polarity : polarity));
169 }
170 
171 /*
172  * Change the LED blinking pattern to correspond to the connectivity
173  */
174 void
175 ar5212SetLedState(struct ath_hal *ah, HAL_LED_STATE state)
176 {
177 	static const uint32_t ledbits[8] = {
178 		AR_PCICFG_LEDCTL_NONE,	/* HAL_LED_INIT */
179 		AR_PCICFG_LEDCTL_PEND,	/* HAL_LED_SCAN */
180 		AR_PCICFG_LEDCTL_PEND,	/* HAL_LED_AUTH */
181 		AR_PCICFG_LEDCTL_ASSOC,	/* HAL_LED_ASSOC*/
182 		AR_PCICFG_LEDCTL_ASSOC,	/* HAL_LED_RUN */
183 		AR_PCICFG_LEDCTL_NONE,
184 		AR_PCICFG_LEDCTL_NONE,
185 		AR_PCICFG_LEDCTL_NONE,
186 	};
187 	uint32_t bits;
188 
189 	bits = OS_REG_READ(ah, AR_PCICFG);
190 	if (IS_2417(ah)) {
191 		/*
192 		 * Enable LED for Nala. There is a bit marked reserved
193 		 * that must be set and we also turn on the power led.
194 		 * Because we mark s/w LED control setting the control
195 		 * status bits below is meangless (the driver must flash
196 		 * the LED(s) using the GPIO lines).
197 		 */
198 		bits = (bits &~ AR_PCICFG_LEDMODE)
199 		     | SM(AR_PCICFG_LEDMODE_POWON, AR_PCICFG_LEDMODE)
200 #if 0
201 		     | SM(AR_PCICFG_LEDMODE_NETON, AR_PCICFG_LEDMODE)
202 #endif
203 		     | 0x08000000;
204 	}
205 	bits = (bits &~ AR_PCICFG_LEDCTL)
206 	     | SM(ledbits[state & 0x7], AR_PCICFG_LEDCTL);
207 	OS_REG_WRITE(ah, AR_PCICFG, bits);
208 }
209 
210 /*
211  * Change association related fields programmed into the hardware.
212  * Writing a valid BSSID to the hardware effectively enables the hardware
213  * to synchronize its TSF to the correct beacons and receive frames coming
214  * from that BSSID. It is called by the SME JOIN operation.
215  */
216 void
217 ar5212WriteAssocid(struct ath_hal *ah, const uint8_t *bssid, uint16_t assocId)
218 {
219 	struct ath_hal_5212 *ahp = AH5212(ah);
220 
221 	/* save bssid for possible re-use on reset */
222 	OS_MEMCPY(ahp->ah_bssid, bssid, IEEE80211_ADDR_LEN);
223 	ahp->ah_assocId = assocId;
224 	OS_REG_WRITE(ah, AR_BSS_ID0, LE_READ_4(ahp->ah_bssid));
225 	OS_REG_WRITE(ah, AR_BSS_ID1, LE_READ_2(ahp->ah_bssid+4) |
226 				     ((assocId & 0x3fff)<<AR_BSS_ID1_AID_S));
227 }
228 
229 /*
230  * Get the current hardware tsf for stamlme
231  */
232 uint64_t
233 ar5212GetTsf64(struct ath_hal *ah)
234 {
235 	uint32_t low1, low2, u32;
236 
237 	/* sync multi-word read */
238 	low1 = OS_REG_READ(ah, AR_TSF_L32);
239 	u32 = OS_REG_READ(ah, AR_TSF_U32);
240 	low2 = OS_REG_READ(ah, AR_TSF_L32);
241 	if (low2 < low1) {	/* roll over */
242 		/*
243 		 * If we are not preempted this will work.  If we are
244 		 * then we re-reading AR_TSF_U32 does no good as the
245 		 * low bits will be meaningless.  Likewise reading
246 		 * L32, U32, U32, then comparing the last two reads
247 		 * to check for rollover doesn't help if preempted--so
248 		 * we take this approach as it costs one less PCI read
249 		 * which can be noticeable when doing things like
250 		 * timestamping packets in monitor mode.
251 		 */
252 		u32++;
253 	}
254 	return (((uint64_t) u32) << 32) | ((uint64_t) low2);
255 }
256 
257 /*
258  * Get the current hardware tsf for stamlme
259  */
260 uint32_t
261 ar5212GetTsf32(struct ath_hal *ah)
262 {
263 	return OS_REG_READ(ah, AR_TSF_L32);
264 }
265 
266 void
267 ar5212SetTsf64(struct ath_hal *ah, uint64_t tsf64)
268 {
269 	OS_REG_WRITE(ah, AR_TSF_L32, tsf64 & 0xffffffff);
270 	OS_REG_WRITE(ah, AR_TSF_U32, (tsf64 >> 32) & 0xffffffff);
271 }
272 
273 /*
274  * Reset the current hardware tsf for stamlme.
275  */
276 void
277 ar5212ResetTsf(struct ath_hal *ah)
278 {
279 
280 	uint32_t val = OS_REG_READ(ah, AR_BEACON);
281 
282 	OS_REG_WRITE(ah, AR_BEACON, val | AR_BEACON_RESET_TSF);
283 	/*
284 	 * When resetting the TSF, write twice to the
285 	 * corresponding register; each write to the RESET_TSF bit toggles
286 	 * the internal signal to cause a reset of the TSF - but if the signal
287 	 * is left high, it will reset the TSF on the next chip reset also!
288 	 * writing the bit an even number of times fixes this issue
289 	 */
290 	OS_REG_WRITE(ah, AR_BEACON, val | AR_BEACON_RESET_TSF);
291 }
292 
293 /*
294  * Set or clear hardware basic rate bit
295  * Set hardware basic rate set if basic rate is found
296  * and basic rate is equal or less than 2Mbps
297  */
298 void
299 ar5212SetBasicRate(struct ath_hal *ah, HAL_RATE_SET *rs)
300 {
301 	const struct ieee80211_channel *chan = AH_PRIVATE(ah)->ah_curchan;
302 	uint32_t reg;
303 	uint8_t xset;
304 	int i;
305 
306 	if (chan == AH_NULL || !IEEE80211_IS_CHAN_CCK(chan))
307 		return;
308 	xset = 0;
309 	for (i = 0; i < rs->rs_count; i++) {
310 		uint8_t rset = rs->rs_rates[i];
311 		/* Basic rate defined? */
312 		if ((rset & 0x80) && (rset &= 0x7f) >= xset)
313 			xset = rset;
314 	}
315 	/*
316 	 * Set the h/w bit to reflect whether or not the basic
317 	 * rate is found to be equal or less than 2Mbps.
318 	 */
319 	reg = OS_REG_READ(ah, AR_STA_ID1);
320 	if (xset && xset/2 <= 2)
321 		OS_REG_WRITE(ah, AR_STA_ID1, reg | AR_STA_ID1_BASE_RATE_11B);
322 	else
323 		OS_REG_WRITE(ah, AR_STA_ID1, reg &~ AR_STA_ID1_BASE_RATE_11B);
324 }
325 
326 /*
327  * Grab a semi-random value from hardware registers - may not
328  * change often
329  */
330 uint32_t
331 ar5212GetRandomSeed(struct ath_hal *ah)
332 {
333 	uint32_t nf;
334 
335 	nf = (OS_REG_READ(ah, AR_PHY(25)) >> 19) & 0x1ff;
336 	if (nf & 0x100)
337 		nf = 0 - ((nf ^ 0x1ff) + 1);
338 	return (OS_REG_READ(ah, AR_TSF_U32) ^
339 		OS_REG_READ(ah, AR_TSF_L32) ^ nf);
340 }
341 
342 /*
343  * Detect if our card is present
344  */
345 HAL_BOOL
346 ar5212DetectCardPresent(struct ath_hal *ah)
347 {
348 	uint16_t macVersion, macRev;
349 	uint32_t v;
350 
351 	/*
352 	 * Read the Silicon Revision register and compare that
353 	 * to what we read at attach time.  If the same, we say
354 	 * a card/device is present.
355 	 */
356 	v = OS_REG_READ(ah, AR_SREV) & AR_SREV_ID;
357 	macVersion = v >> AR_SREV_ID_S;
358 	macRev = v & AR_SREV_REVISION;
359 	return (AH_PRIVATE(ah)->ah_macVersion == macVersion &&
360 		AH_PRIVATE(ah)->ah_macRev == macRev);
361 }
362 
363 void
364 ar5212EnableMibCounters(struct ath_hal *ah)
365 {
366 	/* NB: this just resets the mib counter machinery */
367 	OS_REG_WRITE(ah, AR_MIBC,
368 	    ~(AR_MIBC_COW | AR_MIBC_FMC | AR_MIBC_CMC | AR_MIBC_MCS) & 0x0f);
369 }
370 
371 void
372 ar5212DisableMibCounters(struct ath_hal *ah)
373 {
374 	OS_REG_WRITE(ah, AR_MIBC,  AR_MIBC | AR_MIBC_CMC);
375 }
376 
377 /*
378  * Update MIB Counters
379  */
380 void
381 ar5212UpdateMibCounters(struct ath_hal *ah, HAL_MIB_STATS* stats)
382 {
383 	stats->ackrcv_bad += OS_REG_READ(ah, AR_ACK_FAIL);
384 	stats->rts_bad	  += OS_REG_READ(ah, AR_RTS_FAIL);
385 	stats->fcs_bad	  += OS_REG_READ(ah, AR_FCS_FAIL);
386 	stats->rts_good	  += OS_REG_READ(ah, AR_RTS_OK);
387 	stats->beacons	  += OS_REG_READ(ah, AR_BEACON_CNT);
388 }
389 
390 /*
391  * Detect if the HW supports spreading a CCK signal on channel 14
392  */
393 HAL_BOOL
394 ar5212IsJapanChannelSpreadSupported(struct ath_hal *ah)
395 {
396 	return AH_TRUE;
397 }
398 
399 /*
400  * Get the rssi of frame curently being received.
401  */
402 uint32_t
403 ar5212GetCurRssi(struct ath_hal *ah)
404 {
405 	return (OS_REG_READ(ah, AR_PHY_CURRENT_RSSI) & 0xff);
406 }
407 
408 u_int
409 ar5212GetDefAntenna(struct ath_hal *ah)
410 {
411 	return (OS_REG_READ(ah, AR_DEF_ANTENNA) & 0x7);
412 }
413 
414 void
415 ar5212SetDefAntenna(struct ath_hal *ah, u_int antenna)
416 {
417 	OS_REG_WRITE(ah, AR_DEF_ANTENNA, (antenna & 0x7));
418 }
419 
420 HAL_ANT_SETTING
421 ar5212GetAntennaSwitch(struct ath_hal *ah)
422 {
423 	return AH5212(ah)->ah_antControl;
424 }
425 
426 HAL_BOOL
427 ar5212SetAntennaSwitch(struct ath_hal *ah, HAL_ANT_SETTING setting)
428 {
429 	struct ath_hal_5212 *ahp = AH5212(ah);
430 	const struct ieee80211_channel *chan = AH_PRIVATE(ah)->ah_curchan;
431 
432 	if (!ahp->ah_phyPowerOn || chan == AH_NULL) {
433 		/* PHY powered off, just stash settings */
434 		ahp->ah_antControl = setting;
435 		ahp->ah_diversity = (setting == HAL_ANT_VARIABLE);
436 		return AH_TRUE;
437 	}
438 	return ar5212SetAntennaSwitchInternal(ah, setting, chan);
439 }
440 
441 HAL_BOOL
442 ar5212IsSleepAfterBeaconBroken(struct ath_hal *ah)
443 {
444 	return AH_TRUE;
445 }
446 
447 HAL_BOOL
448 ar5212SetSifsTime(struct ath_hal *ah, u_int us)
449 {
450 	struct ath_hal_5212 *ahp = AH5212(ah);
451 
452 	if (us > ath_hal_mac_usec(ah, 0xffff)) {
453 		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: bad SIFS time %u\n",
454 		    __func__, us);
455 		ahp->ah_sifstime = (u_int) -1;	/* restore default handling */
456 		return AH_FALSE;
457 	} else {
458 		/* convert to system clocks */
459 		OS_REG_WRITE(ah, AR_D_GBL_IFS_SIFS, ath_hal_mac_clks(ah, us-2));
460 		ahp->ah_sifstime = us;
461 		return AH_TRUE;
462 	}
463 }
464 
465 u_int
466 ar5212GetSifsTime(struct ath_hal *ah)
467 {
468 	u_int clks = OS_REG_READ(ah, AR_D_GBL_IFS_SIFS) & 0xffff;
469 	return ath_hal_mac_usec(ah, clks)+2;	/* convert from system clocks */
470 }
471 
472 HAL_BOOL
473 ar5212SetSlotTime(struct ath_hal *ah, u_int us)
474 {
475 	struct ath_hal_5212 *ahp = AH5212(ah);
476 
477 	if (us < HAL_SLOT_TIME_6 || us > ath_hal_mac_usec(ah, 0xffff)) {
478 		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: bad slot time %u\n",
479 		    __func__, us);
480 		ahp->ah_slottime = (u_int) -1;	/* restore default handling */
481 		return AH_FALSE;
482 	} else {
483 		/* convert to system clocks */
484 		OS_REG_WRITE(ah, AR_D_GBL_IFS_SLOT, ath_hal_mac_clks(ah, us));
485 		ahp->ah_slottime = us;
486 		return AH_TRUE;
487 	}
488 }
489 
490 u_int
491 ar5212GetSlotTime(struct ath_hal *ah)
492 {
493 	u_int clks = OS_REG_READ(ah, AR_D_GBL_IFS_SLOT) & 0xffff;
494 	return ath_hal_mac_usec(ah, clks);	/* convert from system clocks */
495 }
496 
497 HAL_BOOL
498 ar5212SetAckTimeout(struct ath_hal *ah, u_int us)
499 {
500 	struct ath_hal_5212 *ahp = AH5212(ah);
501 
502 	if (us > ath_hal_mac_usec(ah, MS(0xffffffff, AR_TIME_OUT_ACK))) {
503 		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: bad ack timeout %u\n",
504 		    __func__, us);
505 		ahp->ah_acktimeout = (u_int) -1; /* restore default handling */
506 		return AH_FALSE;
507 	} else {
508 		/* convert to system clocks */
509 		OS_REG_RMW_FIELD(ah, AR_TIME_OUT,
510 			AR_TIME_OUT_ACK, ath_hal_mac_clks(ah, us));
511 		ahp->ah_acktimeout = us;
512 		return AH_TRUE;
513 	}
514 }
515 
516 u_int
517 ar5212GetAckTimeout(struct ath_hal *ah)
518 {
519 	u_int clks = MS(OS_REG_READ(ah, AR_TIME_OUT), AR_TIME_OUT_ACK);
520 	return ath_hal_mac_usec(ah, clks);	/* convert from system clocks */
521 }
522 
523 u_int
524 ar5212GetAckCTSRate(struct ath_hal *ah)
525 {
526 	return ((AH5212(ah)->ah_staId1Defaults & AR_STA_ID1_ACKCTS_6MB) == 0);
527 }
528 
529 HAL_BOOL
530 ar5212SetAckCTSRate(struct ath_hal *ah, u_int high)
531 {
532 	struct ath_hal_5212 *ahp = AH5212(ah);
533 
534 	if (high) {
535 		OS_REG_CLR_BIT(ah, AR_STA_ID1, AR_STA_ID1_ACKCTS_6MB);
536 		ahp->ah_staId1Defaults &= ~AR_STA_ID1_ACKCTS_6MB;
537 	} else {
538 		OS_REG_SET_BIT(ah, AR_STA_ID1, AR_STA_ID1_ACKCTS_6MB);
539 		ahp->ah_staId1Defaults |= AR_STA_ID1_ACKCTS_6MB;
540 	}
541 	return AH_TRUE;
542 }
543 
544 HAL_BOOL
545 ar5212SetCTSTimeout(struct ath_hal *ah, u_int us)
546 {
547 	struct ath_hal_5212 *ahp = AH5212(ah);
548 
549 	if (us > ath_hal_mac_usec(ah, MS(0xffffffff, AR_TIME_OUT_CTS))) {
550 		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: bad cts timeout %u\n",
551 		    __func__, us);
552 		ahp->ah_ctstimeout = (u_int) -1; /* restore default handling */
553 		return AH_FALSE;
554 	} else {
555 		/* convert to system clocks */
556 		OS_REG_RMW_FIELD(ah, AR_TIME_OUT,
557 			AR_TIME_OUT_CTS, ath_hal_mac_clks(ah, us));
558 		ahp->ah_ctstimeout = us;
559 		return AH_TRUE;
560 	}
561 }
562 
563 u_int
564 ar5212GetCTSTimeout(struct ath_hal *ah)
565 {
566 	u_int clks = MS(OS_REG_READ(ah, AR_TIME_OUT), AR_TIME_OUT_CTS);
567 	return ath_hal_mac_usec(ah, clks);	/* convert from system clocks */
568 }
569 
570 /* Setup decompression for given key index */
571 HAL_BOOL
572 ar5212SetDecompMask(struct ath_hal *ah, uint16_t keyidx, int en)
573 {
574 	struct ath_hal_5212 *ahp = AH5212(ah);
575 
576         if (keyidx >= HAL_DECOMP_MASK_SIZE)
577                 return AH_FALSE;
578         OS_REG_WRITE(ah, AR_DCM_A, keyidx);
579         OS_REG_WRITE(ah, AR_DCM_D, en ? AR_DCM_D_EN : 0);
580         ahp->ah_decompMask[keyidx] = en;
581 
582         return AH_TRUE;
583 }
584 
585 /* Setup coverage class */
586 void
587 ar5212SetCoverageClass(struct ath_hal *ah, uint8_t coverageclass, int now)
588 {
589 	uint32_t slot, timeout, eifs;
590 	u_int clkRate;
591 
592 	AH_PRIVATE(ah)->ah_coverageClass = coverageclass;
593 
594 	if (now) {
595 		if (AH_PRIVATE(ah)->ah_coverageClass == 0)
596 			return;
597 
598 		/* Don't apply coverage class to non A channels */
599 		if (!IEEE80211_IS_CHAN_A(AH_PRIVATE(ah)->ah_curchan))
600 			return;
601 
602 		/* Get core clock rate */
603 		clkRate = ath_hal_mac_clks(ah, 1);
604 
605 		/* Compute EIFS */
606 		slot = coverageclass * 3 * clkRate;
607 		eifs = coverageclass * 6 * clkRate;
608 		if (IEEE80211_IS_CHAN_HALF(AH_PRIVATE(ah)->ah_curchan)) {
609 			slot += IFS_SLOT_HALF_RATE;
610 			eifs += IFS_EIFS_HALF_RATE;
611 		} else if (IEEE80211_IS_CHAN_QUARTER(AH_PRIVATE(ah)->ah_curchan)) {
612 			slot += IFS_SLOT_QUARTER_RATE;
613 			eifs += IFS_EIFS_QUARTER_RATE;
614 		} else { /* full rate */
615 			slot += IFS_SLOT_FULL_RATE;
616 			eifs += IFS_EIFS_FULL_RATE;
617 		}
618 
619 		/*
620 		 * Add additional time for air propagation for ACK and CTS
621 		 * timeouts. This value is in core clocks.
622   		 */
623 		timeout = ACK_CTS_TIMEOUT_11A + (coverageclass * 3 * clkRate);
624 
625 		/*
626 		 * Write the values: slot, eifs, ack/cts timeouts.
627 		 */
628 		OS_REG_WRITE(ah, AR_D_GBL_IFS_SLOT, slot);
629 		OS_REG_WRITE(ah, AR_D_GBL_IFS_EIFS, eifs);
630 		OS_REG_WRITE(ah, AR_TIME_OUT,
631 			  SM(timeout, AR_TIME_OUT_CTS)
632 			| SM(timeout, AR_TIME_OUT_ACK));
633 	}
634 }
635 
636 HAL_STATUS
637 ar5212SetQuiet(struct ath_hal *ah, uint32_t period, uint32_t duration,
638     uint32_t nextStart, HAL_QUIET_FLAG flag)
639 {
640 	OS_REG_WRITE(ah, AR_QUIET2, period | (duration << AR_QUIET2_QUIET_DUR_S));
641 	if (flag & HAL_QUIET_ENABLE) {
642 		OS_REG_WRITE(ah, AR_QUIET1, nextStart | (1 << 16));
643 	}
644 	else {
645 		OS_REG_WRITE(ah, AR_QUIET1, nextStart);
646 	}
647 	return HAL_OK;
648 }
649 
650 void
651 ar5212SetPCUConfig(struct ath_hal *ah)
652 {
653 	ar5212SetOperatingMode(ah, AH_PRIVATE(ah)->ah_opmode);
654 }
655 
656 /*
657  * Return whether an external 32KHz crystal should be used
658  * to reduce power consumption when sleeping.  We do so if
659  * the crystal is present (obtained from EEPROM) and if we
660  * are not running as an AP and are configured to use it.
661  */
662 HAL_BOOL
663 ar5212Use32KHzclock(struct ath_hal *ah, HAL_OPMODE opmode)
664 {
665 	if (opmode != HAL_M_HOSTAP) {
666 		struct ath_hal_5212 *ahp = AH5212(ah);
667 		return ath_hal_eepromGetFlag(ah, AR_EEP_32KHZCRYSTAL) &&
668 		       (ahp->ah_enable32kHzClock == USE_32KHZ ||
669 		        ahp->ah_enable32kHzClock == AUTO_32KHZ);
670 	} else
671 		return AH_FALSE;
672 }
673 
674 /*
675  * If 32KHz clock exists, use it to lower power consumption during sleep
676  *
677  * Note: If clock is set to 32 KHz, delays on accessing certain
678  *       baseband registers (27-31, 124-127) are required.
679  */
680 void
681 ar5212SetupClock(struct ath_hal *ah, HAL_OPMODE opmode)
682 {
683 	if (ar5212Use32KHzclock(ah, opmode)) {
684 		/*
685 		 * Enable clocks to be turned OFF in BB during sleep
686 		 * and also enable turning OFF 32MHz/40MHz Refclk
687 		 * from A2.
688 		 */
689 		OS_REG_WRITE(ah, AR_PHY_SLEEP_CTR_CONTROL, 0x1f);
690 		OS_REG_WRITE(ah, AR_PHY_REFCLKPD,
691 		    IS_RAD5112_ANY(ah) || IS_5413(ah) ? 0x14 : 0x18);
692 		OS_REG_RMW_FIELD(ah, AR_USEC, AR_USEC_USEC32, 1);
693 		OS_REG_WRITE(ah, AR_TSF_PARM, 61);  /* 32 KHz TSF incr */
694 		OS_REG_RMW_FIELD(ah, AR_PCICFG, AR_PCICFG_SCLK_SEL, 1);
695 
696 		if (IS_2413(ah) || IS_5413(ah) || IS_2417(ah)) {
697 			OS_REG_WRITE(ah, AR_PHY_SLEEP_CTR_LIMIT,   0x26);
698 			OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL,        0x0d);
699 			OS_REG_WRITE(ah, AR_PHY_M_SLEEP,           0x07);
700 			OS_REG_WRITE(ah, AR_PHY_REFCLKDLY,         0x3f);
701 			/* # Set sleep clock rate to 32 KHz. */
702 			OS_REG_RMW_FIELD(ah, AR_PCICFG, AR_PCICFG_SCLK_RATE_IND, 0x2);
703 		} else {
704 			OS_REG_WRITE(ah, AR_PHY_SLEEP_CTR_LIMIT,   0x0a);
705 			OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL,        0x0c);
706 			OS_REG_WRITE(ah, AR_PHY_M_SLEEP,           0x03);
707 			OS_REG_WRITE(ah, AR_PHY_REFCLKDLY,         0x20);
708 			OS_REG_RMW_FIELD(ah, AR_PCICFG, AR_PCICFG_SCLK_RATE_IND, 0x3);
709 		}
710 	} else {
711 		OS_REG_RMW_FIELD(ah, AR_PCICFG, AR_PCICFG_SCLK_RATE_IND, 0x0);
712 		OS_REG_RMW_FIELD(ah, AR_PCICFG, AR_PCICFG_SCLK_SEL, 0);
713 
714 		OS_REG_WRITE(ah, AR_TSF_PARM, 1);	/* 32MHz TSF inc */
715 
716 		OS_REG_WRITE(ah, AR_PHY_SLEEP_CTR_CONTROL, 0x1f);
717 		OS_REG_WRITE(ah, AR_PHY_SLEEP_CTR_LIMIT,   0x7f);
718 
719 		if (IS_2417(ah))
720 			OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL, 0x0a);
721 		else if (IS_HB63(ah))
722 			OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL, 0x32);
723 		else
724 			OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL, 0x0e);
725 		OS_REG_WRITE(ah, AR_PHY_M_SLEEP,           0x0c);
726 		OS_REG_WRITE(ah, AR_PHY_REFCLKDLY,         0xff);
727 		OS_REG_WRITE(ah, AR_PHY_REFCLKPD,
728 		    IS_RAD5112_ANY(ah) || IS_5413(ah) || IS_2417(ah) ? 0x14 : 0x18);
729 		OS_REG_RMW_FIELD(ah, AR_USEC, AR_USEC_USEC32,
730 		    IS_RAD5112_ANY(ah) || IS_5413(ah) ? 39 : 31);
731 	}
732 }
733 
734 /*
735  * If 32KHz clock exists, turn it off and turn back on the 32Mhz
736  */
737 void
738 ar5212RestoreClock(struct ath_hal *ah, HAL_OPMODE opmode)
739 {
740 	if (ar5212Use32KHzclock(ah, opmode)) {
741 		/* # Set sleep clock rate back to 32 MHz. */
742 		OS_REG_RMW_FIELD(ah, AR_PCICFG, AR_PCICFG_SCLK_RATE_IND, 0);
743 		OS_REG_RMW_FIELD(ah, AR_PCICFG, AR_PCICFG_SCLK_SEL, 0);
744 
745 		OS_REG_WRITE(ah, AR_TSF_PARM, 1);	/* 32 MHz TSF incr */
746 		OS_REG_RMW_FIELD(ah, AR_USEC, AR_USEC_USEC32,
747 		    IS_RAD5112_ANY(ah) || IS_5413(ah) ? 39 : 31);
748 
749 		/*
750 		 * Restore BB registers to power-on defaults
751 		 */
752 		OS_REG_WRITE(ah, AR_PHY_SLEEP_CTR_CONTROL, 0x1f);
753 		OS_REG_WRITE(ah, AR_PHY_SLEEP_CTR_LIMIT,   0x7f);
754 		OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL,        0x0e);
755 		OS_REG_WRITE(ah, AR_PHY_M_SLEEP,           0x0c);
756 		OS_REG_WRITE(ah, AR_PHY_REFCLKDLY,         0xff);
757 		OS_REG_WRITE(ah, AR_PHY_REFCLKPD,
758 		    IS_RAD5112_ANY(ah) || IS_5413(ah) ?  0x14 : 0x18);
759 	}
760 }
761 
762 /*
763  * Adjust NF based on statistical values for 5GHz frequencies.
764  * Default method: this may be overridden by the rf backend.
765  */
766 int16_t
767 ar5212GetNfAdjust(struct ath_hal *ah, const HAL_CHANNEL_INTERNAL *c)
768 {
769 	static const struct {
770 		uint16_t freqLow;
771 		int16_t	  adjust;
772 	} adjustDef[] = {
773 		{ 5790,	11 },	/* NB: ordered high -> low */
774 		{ 5730, 10 },
775 		{ 5690,  9 },
776 		{ 5660,  8 },
777 		{ 5610,  7 },
778 		{ 5530,  5 },
779 		{ 5450,  4 },
780 		{ 5379,  2 },
781 		{ 5209,  0 },
782 		{ 3000,  1 },
783 		{    0,  0 },
784 	};
785 	int i;
786 
787 	for (i = 0; c->channel <= adjustDef[i].freqLow; i++)
788 		;
789 	return adjustDef[i].adjust;
790 }
791 
792 HAL_STATUS
793 ar5212GetCapability(struct ath_hal *ah, HAL_CAPABILITY_TYPE type,
794 	uint32_t capability, uint32_t *result)
795 {
796 #define	MACVERSION(ah)	AH_PRIVATE(ah)->ah_macVersion
797 	struct ath_hal_5212 *ahp = AH5212(ah);
798 	const HAL_CAPABILITIES *pCap = &AH_PRIVATE(ah)->ah_caps;
799 	const struct ar5212AniState *ani;
800 
801 	switch (type) {
802 	case HAL_CAP_CIPHER:		/* cipher handled in hardware */
803 		switch (capability) {
804 		case HAL_CIPHER_AES_CCM:
805 			return pCap->halCipherAesCcmSupport ?
806 				HAL_OK : HAL_ENOTSUPP;
807 		case HAL_CIPHER_AES_OCB:
808 		case HAL_CIPHER_TKIP:
809 		case HAL_CIPHER_WEP:
810 		case HAL_CIPHER_MIC:
811 		case HAL_CIPHER_CLR:
812 			return HAL_OK;
813 		default:
814 			return HAL_ENOTSUPP;
815 		}
816 	case HAL_CAP_TKIP_MIC:		/* handle TKIP MIC in hardware */
817 		switch (capability) {
818 		case 0:			/* hardware capability */
819 			return HAL_OK;
820 		case 1:
821 			return (ahp->ah_staId1Defaults &
822 			    AR_STA_ID1_CRPT_MIC_ENABLE) ?  HAL_OK : HAL_ENXIO;
823 		}
824 		return HAL_EINVAL;
825 	case HAL_CAP_TKIP_SPLIT:	/* hardware TKIP uses split keys */
826 		switch (capability) {
827 		case 0:			/* hardware capability */
828 			return pCap->halTkipMicTxRxKeySupport ?
829 				HAL_ENXIO : HAL_OK;
830 		case 1:			/* current setting */
831 			return (ahp->ah_miscMode &
832 			    AR_MISC_MODE_MIC_NEW_LOC_ENABLE) ? HAL_ENXIO : HAL_OK;
833 		}
834 		return HAL_EINVAL;
835 	case HAL_CAP_WME_TKIPMIC:	/* hardware can do TKIP MIC w/ WMM */
836 		/* XXX move to capability bit */
837 		return MACVERSION(ah) > AR_SREV_VERSION_VENICE ||
838 		    (MACVERSION(ah) == AR_SREV_VERSION_VENICE &&
839 		     AH_PRIVATE(ah)->ah_macRev >= 8) ? HAL_OK : HAL_ENOTSUPP;
840 	case HAL_CAP_DIVERSITY:		/* hardware supports fast diversity */
841 		switch (capability) {
842 		case 0:			/* hardware capability */
843 			return HAL_OK;
844 		case 1:			/* current setting */
845 			return ahp->ah_diversity ? HAL_OK : HAL_ENXIO;
846 		case HAL_CAP_STRONG_DIV:
847 			*result = OS_REG_READ(ah, AR_PHY_RESTART);
848 			*result = MS(*result, AR_PHY_RESTART_DIV_GC);
849 			return HAL_OK;
850 		}
851 		return HAL_EINVAL;
852 	case HAL_CAP_DIAG:
853 		*result = AH_PRIVATE(ah)->ah_diagreg;
854 		return HAL_OK;
855 	case HAL_CAP_TPC:
856 		switch (capability) {
857 		case 0:			/* hardware capability */
858 			return HAL_OK;
859 		case 1:
860 			return ahp->ah_tpcEnabled ? HAL_OK : HAL_ENXIO;
861 		}
862 		return HAL_OK;
863 	case HAL_CAP_PHYDIAG:		/* radar pulse detection capability */
864 		switch (capability) {
865 		case HAL_CAP_RADAR:
866 			return ath_hal_eepromGetFlag(ah, AR_EEP_AMODE) ?
867 			    HAL_OK: HAL_ENXIO;
868 		case HAL_CAP_AR:
869 			return (ath_hal_eepromGetFlag(ah, AR_EEP_GMODE) ||
870 			    ath_hal_eepromGetFlag(ah, AR_EEP_BMODE)) ?
871 			       HAL_OK: HAL_ENXIO;
872 		}
873 		return HAL_ENXIO;
874 	case HAL_CAP_MCAST_KEYSRCH:	/* multicast frame keycache search */
875 		switch (capability) {
876 		case 0:			/* hardware capability */
877 			return pCap->halMcastKeySrchSupport ? HAL_OK : HAL_ENXIO;
878 		case 1:
879 			return (ahp->ah_staId1Defaults &
880 			    AR_STA_ID1_MCAST_KSRCH) ? HAL_OK : HAL_ENXIO;
881 		}
882 		return HAL_EINVAL;
883 	case HAL_CAP_TSF_ADJUST:	/* hardware has beacon tsf adjust */
884 		switch (capability) {
885 		case 0:			/* hardware capability */
886 			return pCap->halTsfAddSupport ? HAL_OK : HAL_ENOTSUPP;
887 		case 1:
888 			return (ahp->ah_miscMode & AR_MISC_MODE_TX_ADD_TSF) ?
889 				HAL_OK : HAL_ENXIO;
890 		}
891 		return HAL_EINVAL;
892 	case HAL_CAP_TPC_ACK:
893 		*result = MS(ahp->ah_macTPC, AR_TPC_ACK);
894 		return HAL_OK;
895 	case HAL_CAP_TPC_CTS:
896 		*result = MS(ahp->ah_macTPC, AR_TPC_CTS);
897 		return HAL_OK;
898 	case HAL_CAP_INTMIT:		/* interference mitigation */
899 		switch (capability) {
900 		case HAL_CAP_INTMIT_PRESENT:		/* hardware capability */
901 			return HAL_OK;
902 		case HAL_CAP_INTMIT_ENABLE:
903 			return (ahp->ah_procPhyErr & HAL_ANI_ENA) ?
904 				HAL_OK : HAL_ENXIO;
905 		case HAL_CAP_INTMIT_NOISE_IMMUNITY_LEVEL:
906 		case HAL_CAP_INTMIT_OFDM_WEAK_SIGNAL_LEVEL:
907 		case HAL_CAP_INTMIT_CCK_WEAK_SIGNAL_THR:
908 		case HAL_CAP_INTMIT_FIRSTEP_LEVEL:
909 		case HAL_CAP_INTMIT_SPUR_IMMUNITY_LEVEL:
910 			ani = ar5212AniGetCurrentState(ah);
911 			if (ani == AH_NULL)
912 				return HAL_ENXIO;
913 			switch (capability) {
914 			case 2:	*result = ani->noiseImmunityLevel; break;
915 			case 3: *result = !ani->ofdmWeakSigDetectOff; break;
916 			case 4: *result = ani->cckWeakSigThreshold; break;
917 			case 5: *result = ani->firstepLevel; break;
918 			case 6: *result = ani->spurImmunityLevel; break;
919 			}
920 			return HAL_OK;
921 		}
922 		return HAL_EINVAL;
923 	default:
924 		return ath_hal_getcapability(ah, type, capability, result);
925 	}
926 #undef MACVERSION
927 }
928 
929 HAL_BOOL
930 ar5212SetCapability(struct ath_hal *ah, HAL_CAPABILITY_TYPE type,
931 	uint32_t capability, uint32_t setting, HAL_STATUS *status)
932 {
933 #define	N(a)	(sizeof(a)/sizeof(a[0]))
934 	struct ath_hal_5212 *ahp = AH5212(ah);
935 	const HAL_CAPABILITIES *pCap = &AH_PRIVATE(ah)->ah_caps;
936 	uint32_t v;
937 
938 	switch (type) {
939 	case HAL_CAP_TKIP_MIC:		/* handle TKIP MIC in hardware */
940 		if (setting)
941 			ahp->ah_staId1Defaults |= AR_STA_ID1_CRPT_MIC_ENABLE;
942 		else
943 			ahp->ah_staId1Defaults &= ~AR_STA_ID1_CRPT_MIC_ENABLE;
944 		return AH_TRUE;
945 	case HAL_CAP_TKIP_SPLIT:	/* hardware TKIP uses split keys */
946 		if (!pCap->halTkipMicTxRxKeySupport)
947 			return AH_FALSE;
948 		/* NB: true =>'s use split key cache layout */
949 		if (setting)
950 			ahp->ah_miscMode &= ~AR_MISC_MODE_MIC_NEW_LOC_ENABLE;
951 		else
952 			ahp->ah_miscMode |= AR_MISC_MODE_MIC_NEW_LOC_ENABLE;
953 		/* NB: write here so keys can be setup w/o a reset */
954 		OS_REG_WRITE(ah, AR_MISC_MODE, OS_REG_READ(ah, AR_MISC_MODE) | ahp->ah_miscMode);
955 		return AH_TRUE;
956 	case HAL_CAP_DIVERSITY:
957 		switch (capability) {
958 		case 0:
959 			return AH_FALSE;
960 		case 1:	/* setting */
961 			if (ahp->ah_phyPowerOn) {
962 				if (capability == HAL_CAP_STRONG_DIV) {
963 					v = OS_REG_READ(ah, AR_PHY_CCK_DETECT);
964 					if (setting)
965 						v |= AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV;
966 					else
967 						v &= ~AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV;
968 					OS_REG_WRITE(ah, AR_PHY_CCK_DETECT, v);
969 				}
970 			}
971 			ahp->ah_diversity = (setting != 0);
972 			return AH_TRUE;
973 
974 		case HAL_CAP_STRONG_DIV:
975 			if (! ahp->ah_phyPowerOn)
976 				return AH_FALSE;
977 			v = OS_REG_READ(ah, AR_PHY_RESTART);
978 			v &= ~AR_PHY_RESTART_DIV_GC;
979 			v |= SM(setting, AR_PHY_RESTART_DIV_GC);
980 			OS_REG_WRITE(ah, AR_PHY_RESTART, v);
981 			return AH_TRUE;
982 		default:
983 			return AH_FALSE;
984 		}
985 	case HAL_CAP_DIAG:		/* hardware diagnostic support */
986 		/*
987 		 * NB: could split this up into virtual capabilities,
988 		 *     (e.g. 1 => ACK, 2 => CTS, etc.) but it hardly
989 		 *     seems worth the additional complexity.
990 		 */
991 		AH_PRIVATE(ah)->ah_diagreg = setting;
992 		OS_REG_WRITE(ah, AR_DIAG_SW, AH_PRIVATE(ah)->ah_diagreg);
993 		return AH_TRUE;
994 	case HAL_CAP_TPC:
995 		ahp->ah_tpcEnabled = (setting != 0);
996 		return AH_TRUE;
997 	case HAL_CAP_MCAST_KEYSRCH:	/* multicast frame keycache search */
998 		if (setting)
999 			ahp->ah_staId1Defaults |= AR_STA_ID1_MCAST_KSRCH;
1000 		else
1001 			ahp->ah_staId1Defaults &= ~AR_STA_ID1_MCAST_KSRCH;
1002 		return AH_TRUE;
1003 	case HAL_CAP_TPC_ACK:
1004 	case HAL_CAP_TPC_CTS:
1005 		setting += ahp->ah_txPowerIndexOffset;
1006 		if (setting > 63)
1007 			setting = 63;
1008 		if (type == HAL_CAP_TPC_ACK) {
1009 			ahp->ah_macTPC &= AR_TPC_ACK;
1010 			ahp->ah_macTPC |= MS(setting, AR_TPC_ACK);
1011 		} else {
1012 			ahp->ah_macTPC &= AR_TPC_CTS;
1013 			ahp->ah_macTPC |= MS(setting, AR_TPC_CTS);
1014 		}
1015 		OS_REG_WRITE(ah, AR_TPC, ahp->ah_macTPC);
1016 		return AH_TRUE;
1017 	case HAL_CAP_INTMIT: {		/* interference mitigation */
1018 		/* This maps the public ANI commands to the internal ANI commands */
1019 		/* Private: HAL_ANI_CMD; Public: HAL_CAP_INTMIT_CMD */
1020 		static const HAL_ANI_CMD cmds[] = {
1021 			HAL_ANI_PRESENT,
1022 			HAL_ANI_MODE,
1023 			HAL_ANI_NOISE_IMMUNITY_LEVEL,
1024 			HAL_ANI_OFDM_WEAK_SIGNAL_DETECTION,
1025 			HAL_ANI_CCK_WEAK_SIGNAL_THR,
1026 			HAL_ANI_FIRSTEP_LEVEL,
1027 			HAL_ANI_SPUR_IMMUNITY_LEVEL,
1028 		};
1029 		return capability < N(cmds) ?
1030 			AH5212(ah)->ah_aniControl(ah, cmds[capability], setting) :
1031 			AH_FALSE;
1032 	}
1033 	case HAL_CAP_TSF_ADJUST:	/* hardware has beacon tsf adjust */
1034 		if (pCap->halTsfAddSupport) {
1035 			if (setting)
1036 				ahp->ah_miscMode |= AR_MISC_MODE_TX_ADD_TSF;
1037 			else
1038 				ahp->ah_miscMode &= ~AR_MISC_MODE_TX_ADD_TSF;
1039 			return AH_TRUE;
1040 		}
1041 		/* fall thru... */
1042 	default:
1043 		return ath_hal_setcapability(ah, type, capability,
1044 				setting, status);
1045 	}
1046 #undef N
1047 }
1048 
1049 HAL_BOOL
1050 ar5212GetDiagState(struct ath_hal *ah, int request,
1051 	const void *args, uint32_t argsize,
1052 	void **result, uint32_t *resultsize)
1053 {
1054 	struct ath_hal_5212 *ahp = AH5212(ah);
1055 
1056 	(void) ahp;
1057 	if (ath_hal_getdiagstate(ah, request, args, argsize, result, resultsize))
1058 		return AH_TRUE;
1059 	switch (request) {
1060 	case HAL_DIAG_EEPROM:
1061 	case HAL_DIAG_EEPROM_EXP_11A:
1062 	case HAL_DIAG_EEPROM_EXP_11B:
1063 	case HAL_DIAG_EEPROM_EXP_11G:
1064 	case HAL_DIAG_RFGAIN:
1065 		return ath_hal_eepromDiag(ah, request,
1066 		    args, argsize, result, resultsize);
1067 	case HAL_DIAG_RFGAIN_CURSTEP:
1068 		*result = __DECONST(void *, ahp->ah_gainValues.currStep);
1069 		*resultsize = (*result == AH_NULL) ?
1070 			0 : sizeof(GAIN_OPTIMIZATION_STEP);
1071 		return AH_TRUE;
1072 	case HAL_DIAG_PCDAC:
1073 		*result = ahp->ah_pcdacTable;
1074 		*resultsize = ahp->ah_pcdacTableSize;
1075 		return AH_TRUE;
1076 	case HAL_DIAG_TXRATES:
1077 		*result = &ahp->ah_ratesArray[0];
1078 		*resultsize = sizeof(ahp->ah_ratesArray);
1079 		return AH_TRUE;
1080 	case HAL_DIAG_ANI_CURRENT:
1081 		*result = ar5212AniGetCurrentState(ah);
1082 		*resultsize = (*result == AH_NULL) ?
1083 			0 : sizeof(struct ar5212AniState);
1084 		return AH_TRUE;
1085 	case HAL_DIAG_ANI_STATS:
1086 		*result = ar5212AniGetCurrentStats(ah);
1087 		*resultsize = (*result == AH_NULL) ?
1088 			0 : sizeof(struct ar5212Stats);
1089 		return AH_TRUE;
1090 	case HAL_DIAG_ANI_CMD:
1091 		if (argsize != 2*sizeof(uint32_t))
1092 			return AH_FALSE;
1093 		AH5212(ah)->ah_aniControl(ah, ((const uint32_t *)args)[0],
1094 			((const uint32_t *)args)[1]);
1095 		return AH_TRUE;
1096 	case HAL_DIAG_ANI_PARAMS:
1097 		/*
1098 		 * NB: We assume struct ar5212AniParams is identical
1099 		 * to HAL_ANI_PARAMS; if they diverge then we'll need
1100 		 * to handle it here
1101 		 */
1102 		if (argsize == 0 && args == AH_NULL) {
1103 			struct ar5212AniState *aniState =
1104 			    ar5212AniGetCurrentState(ah);
1105 			if (aniState == AH_NULL)
1106 				return AH_FALSE;
1107 			*result = __DECONST(void *, aniState->params);
1108 			*resultsize = sizeof(struct ar5212AniParams);
1109 			return AH_TRUE;
1110 		} else {
1111 			if (argsize != sizeof(struct ar5212AniParams))
1112 				return AH_FALSE;
1113 			return ar5212AniSetParams(ah, args, args);
1114 		}
1115 		break;
1116 	case HAL_DIAG_CHANSURVEY:
1117 		*result = &ahp->ah_chansurvey;
1118 		*resultsize = sizeof(HAL_CHANNEL_SURVEY);
1119 		return AH_TRUE;
1120 	}
1121 	return AH_FALSE;
1122 }
1123 
1124 /*
1125  * Check whether there's an in-progress NF completion.
1126  *
1127  * Returns AH_TRUE if there's a in-progress NF calibration, AH_FALSE
1128  * otherwise.
1129  */
1130 HAL_BOOL
1131 ar5212IsNFCalInProgress(struct ath_hal *ah)
1132 {
1133 	if (OS_REG_READ(ah, AR_PHY_AGC_CONTROL) & AR_PHY_AGC_CONTROL_NF)
1134 		return AH_TRUE;
1135 	return AH_FALSE;
1136 }
1137 
1138 /*
1139  * Wait for an in-progress NF calibration to complete.
1140  *
1141  * The completion function waits "i" times 10uS.
1142  * It returns AH_TRUE if the NF calibration completed (or was never
1143  * in progress); AH_FALSE if it was still in progress after "i" checks.
1144  */
1145 HAL_BOOL
1146 ar5212WaitNFCalComplete(struct ath_hal *ah, int i)
1147 {
1148 	int j;
1149 	if (i <= 0)
1150 		i = 1;	  /* it should run at least once */
1151 	for (j = 0; j < i; j++) {
1152 		if (! ar5212IsNFCalInProgress(ah))
1153 			return AH_TRUE;
1154 		OS_DELAY(10);
1155 	}
1156 	return AH_FALSE;
1157 }
1158 
1159 void
1160 ar5212EnableDfs(struct ath_hal *ah, HAL_PHYERR_PARAM *pe)
1161 {
1162 	uint32_t val;
1163 	val = OS_REG_READ(ah, AR_PHY_RADAR_0);
1164 
1165 	if (pe->pe_firpwr != HAL_PHYERR_PARAM_NOVAL) {
1166 		val &= ~AR_PHY_RADAR_0_FIRPWR;
1167 		val |= SM(pe->pe_firpwr, AR_PHY_RADAR_0_FIRPWR);
1168 	}
1169 	if (pe->pe_rrssi != HAL_PHYERR_PARAM_NOVAL) {
1170 		val &= ~AR_PHY_RADAR_0_RRSSI;
1171 		val |= SM(pe->pe_rrssi, AR_PHY_RADAR_0_RRSSI);
1172 	}
1173 	if (pe->pe_height != HAL_PHYERR_PARAM_NOVAL) {
1174 		val &= ~AR_PHY_RADAR_0_HEIGHT;
1175 		val |= SM(pe->pe_height, AR_PHY_RADAR_0_HEIGHT);
1176 	}
1177 	if (pe->pe_prssi != HAL_PHYERR_PARAM_NOVAL) {
1178 		val &= ~AR_PHY_RADAR_0_PRSSI;
1179 		val |= SM(pe->pe_prssi, AR_PHY_RADAR_0_PRSSI);
1180 	}
1181 	if (pe->pe_inband != HAL_PHYERR_PARAM_NOVAL) {
1182 		val &= ~AR_PHY_RADAR_0_INBAND;
1183 		val |= SM(pe->pe_inband, AR_PHY_RADAR_0_INBAND);
1184 	}
1185 	if (pe->pe_enabled)
1186 		val |= AR_PHY_RADAR_0_ENA;
1187 	else
1188 		val &= ~ AR_PHY_RADAR_0_ENA;
1189 
1190 	if (IS_5413(ah)) {
1191 
1192 		if (pe->pe_blockradar == 1)
1193 			OS_REG_SET_BIT(ah, AR_PHY_RADAR_2,
1194 			    AR_PHY_RADAR_2_BLOCKOFDMWEAK);
1195 		else
1196 			OS_REG_CLR_BIT(ah, AR_PHY_RADAR_2,
1197 			    AR_PHY_RADAR_2_BLOCKOFDMWEAK);
1198 
1199 		if (pe->pe_en_relstep_check == 1)
1200 			OS_REG_SET_BIT(ah, AR_PHY_RADAR_2,
1201 			    AR_PHY_RADAR_2_ENRELSTEPCHK);
1202 		else
1203 			OS_REG_CLR_BIT(ah, AR_PHY_RADAR_2,
1204 			    AR_PHY_RADAR_2_ENRELSTEPCHK);
1205 
1206 		if (pe->pe_usefir128 == 1)
1207 			OS_REG_SET_BIT(ah, AR_PHY_RADAR_2,
1208 			    AR_PHY_RADAR_2_USEFIR128);
1209 		else
1210 			OS_REG_CLR_BIT(ah, AR_PHY_RADAR_2,
1211 			    AR_PHY_RADAR_2_USEFIR128);
1212 
1213 		if (pe->pe_enmaxrssi == 1)
1214 			OS_REG_SET_BIT(ah, AR_PHY_RADAR_2,
1215 			    AR_PHY_RADAR_2_ENMAXRSSI);
1216 		else
1217 			OS_REG_CLR_BIT(ah, AR_PHY_RADAR_2,
1218 			    AR_PHY_RADAR_2_ENMAXRSSI);
1219 
1220 		if (pe->pe_enrelpwr == 1)
1221 			OS_REG_SET_BIT(ah, AR_PHY_RADAR_2,
1222 			    AR_PHY_RADAR_2_ENRELPWRCHK);
1223 		else
1224 			OS_REG_CLR_BIT(ah, AR_PHY_RADAR_2,
1225 			    AR_PHY_RADAR_2_ENRELPWRCHK);
1226 
1227 		if (pe->pe_relpwr != HAL_PHYERR_PARAM_NOVAL)
1228 			OS_REG_RMW_FIELD(ah, AR_PHY_RADAR_2,
1229 			    AR_PHY_RADAR_2_RELPWR, pe->pe_relpwr);
1230 
1231 		if (pe->pe_relstep != HAL_PHYERR_PARAM_NOVAL)
1232 			OS_REG_RMW_FIELD(ah, AR_PHY_RADAR_2,
1233 			    AR_PHY_RADAR_2_RELSTEP, pe->pe_relstep);
1234 
1235 		if (pe->pe_maxlen != HAL_PHYERR_PARAM_NOVAL)
1236 			OS_REG_RMW_FIELD(ah, AR_PHY_RADAR_2,
1237 			    AR_PHY_RADAR_2_MAXLEN, pe->pe_maxlen);
1238 	}
1239 
1240 	OS_REG_WRITE(ah, AR_PHY_RADAR_0, val);
1241 }
1242 
1243 /*
1244  * Parameters for the AR5212 PHY.
1245  */
1246 #define	AR5212_DFS_FIRPWR	-35
1247 #define	AR5212_DFS_RRSSI	20
1248 #define	AR5212_DFS_HEIGHT	14
1249 #define	AR5212_DFS_PRSSI	6
1250 #define	AR5212_DFS_INBAND	4
1251 
1252 /*
1253  * Default parameters for the AR5413 PHY.
1254  */
1255 #define	AR5413_DFS_FIRPWR	-34
1256 #define	AR5413_DFS_RRSSI	20
1257 #define	AR5413_DFS_HEIGHT	10
1258 #define	AR5413_DFS_PRSSI	15
1259 #define	AR5413_DFS_INBAND	6
1260 #define	AR5413_DFS_RELPWR	8
1261 #define	AR5413_DFS_RELSTEP	31
1262 #define	AR5413_DFS_MAXLEN	255
1263 
1264 HAL_BOOL
1265 ar5212GetDfsDefaultThresh(struct ath_hal *ah, HAL_PHYERR_PARAM *pe)
1266 {
1267 
1268 	if (IS_5413(ah)) {
1269 		pe->pe_firpwr = AR5413_DFS_FIRPWR;
1270 		pe->pe_rrssi = AR5413_DFS_RRSSI;
1271 		pe->pe_height = AR5413_DFS_HEIGHT;
1272 		pe->pe_prssi = AR5413_DFS_PRSSI;
1273 		pe->pe_inband = AR5413_DFS_INBAND;
1274 		pe->pe_relpwr = AR5413_DFS_RELPWR;
1275 		pe->pe_relstep = AR5413_DFS_RELSTEP;
1276 		pe->pe_maxlen = AR5413_DFS_MAXLEN;
1277 		pe->pe_usefir128 = 0;
1278 		pe->pe_blockradar = 1;
1279 		pe->pe_enmaxrssi = 1;
1280 		pe->pe_enrelpwr = 1;
1281 		pe->pe_en_relstep_check = 0;
1282 	} else {
1283 		pe->pe_firpwr = AR5212_DFS_FIRPWR;
1284 		pe->pe_rrssi = AR5212_DFS_RRSSI;
1285 		pe->pe_height = AR5212_DFS_HEIGHT;
1286 		pe->pe_prssi = AR5212_DFS_PRSSI;
1287 		pe->pe_inband = AR5212_DFS_INBAND;
1288 		pe->pe_relpwr = 0;
1289 		pe->pe_relstep = 0;
1290 		pe->pe_maxlen = 0;
1291 		pe->pe_usefir128 = 0;
1292 		pe->pe_blockradar = 0;
1293 		pe->pe_enmaxrssi = 0;
1294 		pe->pe_enrelpwr = 0;
1295 		pe->pe_en_relstep_check = 0;
1296 	}
1297 
1298 	return (AH_TRUE);
1299 }
1300 
1301 void
1302 ar5212GetDfsThresh(struct ath_hal *ah, HAL_PHYERR_PARAM *pe)
1303 {
1304 	uint32_t val,temp;
1305 
1306 	val = OS_REG_READ(ah, AR_PHY_RADAR_0);
1307 
1308 	temp = MS(val,AR_PHY_RADAR_0_FIRPWR);
1309 	temp |= 0xFFFFFF80;
1310 	pe->pe_firpwr = temp;
1311 	pe->pe_rrssi = MS(val, AR_PHY_RADAR_0_RRSSI);
1312 	pe->pe_height =  MS(val, AR_PHY_RADAR_0_HEIGHT);
1313 	pe->pe_prssi = MS(val, AR_PHY_RADAR_0_PRSSI);
1314 	pe->pe_inband = MS(val, AR_PHY_RADAR_0_INBAND);
1315 	pe->pe_enabled = !! (val & AR_PHY_RADAR_0_ENA);
1316 
1317 	pe->pe_relpwr = 0;
1318 	pe->pe_relstep = 0;
1319 	pe->pe_maxlen = 0;
1320 	pe->pe_usefir128 = 0;
1321 	pe->pe_blockradar = 0;
1322 	pe->pe_enmaxrssi = 0;
1323 	pe->pe_enrelpwr = 0;
1324 	pe->pe_en_relstep_check = 0;
1325 	pe->pe_extchannel = AH_FALSE;
1326 
1327 	if (IS_5413(ah)) {
1328 		val = OS_REG_READ(ah, AR_PHY_RADAR_2);
1329 		pe->pe_relpwr = !! MS(val, AR_PHY_RADAR_2_RELPWR);
1330 		pe->pe_relstep = !! MS(val, AR_PHY_RADAR_2_RELSTEP);
1331 		pe->pe_maxlen = !! MS(val, AR_PHY_RADAR_2_MAXLEN);
1332 
1333 		pe->pe_usefir128 = !! (val & AR_PHY_RADAR_2_USEFIR128);
1334 		pe->pe_blockradar = !! (val & AR_PHY_RADAR_2_BLOCKOFDMWEAK);
1335 		pe->pe_enmaxrssi = !! (val & AR_PHY_RADAR_2_ENMAXRSSI);
1336 		pe->pe_enrelpwr = !! (val & AR_PHY_RADAR_2_ENRELPWRCHK);
1337 		pe->pe_en_relstep_check =
1338 		    !! (val & AR_PHY_RADAR_2_ENRELSTEPCHK);
1339 	}
1340 }
1341 
1342 /*
1343  * Process the radar phy error and extract the pulse duration.
1344  */
1345 HAL_BOOL
1346 ar5212ProcessRadarEvent(struct ath_hal *ah, struct ath_rx_status *rxs,
1347     uint64_t fulltsf, const char *buf, HAL_DFS_EVENT *event)
1348 {
1349 	uint8_t dur;
1350 	uint8_t rssi;
1351 
1352 	/* Check whether the given phy error is a radar event */
1353 	if ((rxs->rs_phyerr != HAL_PHYERR_RADAR) &&
1354 	    (rxs->rs_phyerr != HAL_PHYERR_FALSE_RADAR_EXT))
1355 		return AH_FALSE;
1356 
1357 	/*
1358 	 * The first byte is the pulse width - if there's
1359 	 * no data, simply set the duration to 0
1360 	 */
1361 	if (rxs->rs_datalen >= 1)
1362 		/* The pulse width is byte 0 of the data */
1363 		dur = ((uint8_t) buf[0]) & 0xff;
1364 	else
1365 		dur = 0;
1366 
1367 	/* Pulse RSSI is the normal reported RSSI */
1368 	rssi = (uint8_t) rxs->rs_rssi;
1369 
1370 	/* 0 duration/rssi is not a valid radar event */
1371 	if (dur == 0 && rssi == 0)
1372 		return AH_FALSE;
1373 
1374 	HALDEBUG(ah, HAL_DEBUG_DFS, "%s: rssi=%d, dur=%d\n",
1375 	    __func__, rssi, dur);
1376 
1377 	/* Record the event */
1378 	event->re_full_ts = fulltsf;
1379 	event->re_ts = rxs->rs_tstamp;
1380 	event->re_rssi = rssi;
1381 	event->re_dur = dur;
1382 	event->re_flags = HAL_DFS_EVENT_PRICH;
1383 
1384 	return AH_TRUE;
1385 }
1386 
1387 /*
1388  * Return whether 5GHz fast-clock (44MHz) is enabled.
1389  * It's always disabled for AR5212 series NICs.
1390  */
1391 HAL_BOOL
1392 ar5212IsFastClockEnabled(struct ath_hal *ah)
1393 {
1394 	return AH_FALSE;
1395 }
1396 
1397 /*
1398  * Return what percentage of the extension channel is busy.
1399  * This is always disabled for AR5212 series NICs.
1400  */
1401 uint32_t
1402 ar5212Get11nExtBusy(struct ath_hal *ah)
1403 {
1404 	return 0;
1405 }
1406 
1407 /*
1408  * Channel survey support.
1409  */
1410 HAL_BOOL
1411 ar5212GetMibCycleCounts(struct ath_hal *ah, HAL_SURVEY_SAMPLE *hsample)
1412 {
1413 	struct ath_hal_5212 *ahp = AH5212(ah);
1414 	u_int32_t good = AH_TRUE;
1415 
1416 	/* XXX freeze/unfreeze mib counters */
1417 	uint32_t rc = OS_REG_READ(ah, AR_RCCNT);
1418 	uint32_t rf = OS_REG_READ(ah, AR_RFCNT);
1419 	uint32_t tf = OS_REG_READ(ah, AR_TFCNT);
1420 	uint32_t cc = OS_REG_READ(ah, AR_CCCNT); /* read cycles last */
1421 
1422 	if (ahp->ah_cycleCount == 0 || ahp->ah_cycleCount > cc) {
1423 		/*
1424 		 * Cycle counter wrap (or initial call); it's not possible
1425 		 * to accurately calculate a value because the registers
1426 		 * right shift rather than wrap--so punt and return 0.
1427 		 */
1428 		HALDEBUG(ah, HAL_DEBUG_ANY,
1429 		    "%s: cycle counter wrap. ExtBusy = 0\n", __func__);
1430 		good = AH_FALSE;
1431 	} else {
1432 		hsample->cycle_count = cc - ahp->ah_cycleCount;
1433 		hsample->chan_busy = rc - ahp->ah_ctlBusy;
1434 		hsample->ext_chan_busy = 0;
1435 		hsample->rx_busy = rf - ahp->ah_rxBusy;
1436 		hsample->tx_busy = tf - ahp->ah_txBusy;
1437 	}
1438 
1439 	/*
1440 	 * Keep a copy of the MIB results so the next sample has something
1441 	 * to work from.
1442 	 */
1443 	ahp->ah_cycleCount = cc;
1444 	ahp->ah_rxBusy = rf;
1445 	ahp->ah_ctlBusy = rc;
1446 	ahp->ah_txBusy = tf;
1447 
1448 	return (good);
1449 }
1450 
1451 void
1452 ar5212SetChainMasks(struct ath_hal *ah, uint32_t tx_chainmask,
1453     uint32_t rx_chainmask)
1454 {
1455 }
1456