1 /* 2 * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting 3 * Copyright (c) 2002-2008 Atheros Communications, Inc. 4 * 5 * Permission to use, copy, modify, and/or distribute this software for any 6 * purpose with or without fee is hereby granted, provided that the above 7 * copyright notice and this permission notice appear in all copies. 8 * 9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 16 * 17 * $FreeBSD$ 18 */ 19 #include "opt_ah.h" 20 21 #include "ah.h" 22 #include "ah_internal.h" 23 24 #include "ah_eeprom_v3.h" 25 26 #include "ar5212/ar5212.h" 27 #include "ar5212/ar5212reg.h" 28 #include "ar5212/ar5212phy.h" 29 30 #define AH_5212_5112 31 #include "ar5212/ar5212.ini" 32 33 #define N(a) (sizeof(a)/sizeof(a[0])) 34 35 struct ar5112State { 36 RF_HAL_FUNCS base; /* public state, must be first */ 37 uint16_t pcdacTable[PWR_TABLE_SIZE]; 38 39 uint32_t Bank1Data[N(ar5212Bank1_5112)]; 40 uint32_t Bank2Data[N(ar5212Bank2_5112)]; 41 uint32_t Bank3Data[N(ar5212Bank3_5112)]; 42 uint32_t Bank6Data[N(ar5212Bank6_5112)]; 43 uint32_t Bank7Data[N(ar5212Bank7_5112)]; 44 }; 45 #define AR5112(ah) ((struct ar5112State *) AH5212(ah)->ah_rfHal) 46 47 static void ar5212GetLowerUpperIndex(uint16_t v, 48 uint16_t *lp, uint16_t listSize, 49 uint32_t *vlo, uint32_t *vhi); 50 static HAL_BOOL getFullPwrTable(uint16_t numPcdacs, uint16_t *pcdacs, 51 int16_t *power, int16_t maxPower, int16_t *retVals); 52 static int16_t getPminAndPcdacTableFromPowerTable(int16_t *pwrTableT4, 53 uint16_t retVals[]); 54 static int16_t getPminAndPcdacTableFromTwoPowerTables(int16_t *pwrTableLXpdT4, 55 int16_t *pwrTableHXpdT4, uint16_t retVals[], int16_t *pMid); 56 static int16_t interpolate_signed(uint16_t target, 57 uint16_t srcLeft, uint16_t srcRight, 58 int16_t targetLeft, int16_t targetRight); 59 60 extern void ar5212ModifyRfBuffer(uint32_t *rfBuf, uint32_t reg32, 61 uint32_t numBits, uint32_t firstBit, uint32_t column); 62 63 static void 64 ar5112WriteRegs(struct ath_hal *ah, u_int modesIndex, u_int freqIndex, 65 int writes) 66 { 67 HAL_INI_WRITE_ARRAY(ah, ar5212Modes_5112, modesIndex, writes); 68 HAL_INI_WRITE_ARRAY(ah, ar5212Common_5112, 1, writes); 69 HAL_INI_WRITE_ARRAY(ah, ar5212BB_RfGain_5112, freqIndex, writes); 70 } 71 72 /* 73 * Take the MHz channel value and set the Channel value 74 * 75 * ASSUMES: Writes enabled to analog bus 76 */ 77 static HAL_BOOL 78 ar5112SetChannel(struct ath_hal *ah, const struct ieee80211_channel *chan) 79 { 80 uint16_t freq = ath_hal_gethwchannel(ah, chan); 81 uint32_t channelSel = 0; 82 uint32_t bModeSynth = 0; 83 uint32_t aModeRefSel = 0; 84 uint32_t reg32 = 0; 85 86 OS_MARK(ah, AH_MARK_SETCHANNEL, freq); 87 88 if (freq < 4800) { 89 uint32_t txctl; 90 91 if (((freq - 2192) % 5) == 0) { 92 channelSel = ((freq - 672) * 2 - 3040)/10; 93 bModeSynth = 0; 94 } else if (((freq - 2224) % 5) == 0) { 95 channelSel = ((freq - 704) * 2 - 3040) / 10; 96 bModeSynth = 1; 97 } else { 98 HALDEBUG(ah, HAL_DEBUG_ANY, 99 "%s: invalid channel %u MHz\n", 100 __func__, freq); 101 return AH_FALSE; 102 } 103 104 channelSel = (channelSel << 2) & 0xff; 105 channelSel = ath_hal_reverseBits(channelSel, 8); 106 107 txctl = OS_REG_READ(ah, AR_PHY_CCK_TX_CTRL); 108 if (freq == 2484) { 109 /* Enable channel spreading for channel 14 */ 110 OS_REG_WRITE(ah, AR_PHY_CCK_TX_CTRL, 111 txctl | AR_PHY_CCK_TX_CTRL_JAPAN); 112 } else { 113 OS_REG_WRITE(ah, AR_PHY_CCK_TX_CTRL, 114 txctl &~ AR_PHY_CCK_TX_CTRL_JAPAN); 115 } 116 } else if (((freq % 5) == 2) && (freq <= 5435)) { 117 freq = freq - 2; /* Align to even 5MHz raster */ 118 channelSel = ath_hal_reverseBits( 119 (uint32_t)(((freq - 4800)*10)/25 + 1), 8); 120 aModeRefSel = ath_hal_reverseBits(0, 2); 121 } else if ((freq % 20) == 0 && freq >= 5120) { 122 channelSel = ath_hal_reverseBits( 123 ((freq - 4800) / 20 << 2), 8); 124 aModeRefSel = ath_hal_reverseBits(3, 2); 125 } else if ((freq % 10) == 0) { 126 channelSel = ath_hal_reverseBits( 127 ((freq - 4800) / 10 << 1), 8); 128 aModeRefSel = ath_hal_reverseBits(2, 2); 129 } else if ((freq % 5) == 0) { 130 channelSel = ath_hal_reverseBits( 131 (freq - 4800) / 5, 8); 132 aModeRefSel = ath_hal_reverseBits(1, 2); 133 } else { 134 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: invalid channel %u MHz\n", 135 __func__, freq); 136 return AH_FALSE; 137 } 138 139 reg32 = (channelSel << 4) | (aModeRefSel << 2) | (bModeSynth << 1) | 140 (1 << 12) | 0x1; 141 OS_REG_WRITE(ah, AR_PHY(0x27), reg32 & 0xff); 142 143 reg32 >>= 8; 144 OS_REG_WRITE(ah, AR_PHY(0x36), reg32 & 0x7f); 145 146 AH_PRIVATE(ah)->ah_curchan = chan; 147 return AH_TRUE; 148 } 149 150 /* 151 * Return a reference to the requested RF Bank. 152 */ 153 static uint32_t * 154 ar5112GetRfBank(struct ath_hal *ah, int bank) 155 { 156 struct ar5112State *priv = AR5112(ah); 157 158 HALASSERT(priv != AH_NULL); 159 switch (bank) { 160 case 1: return priv->Bank1Data; 161 case 2: return priv->Bank2Data; 162 case 3: return priv->Bank3Data; 163 case 6: return priv->Bank6Data; 164 case 7: return priv->Bank7Data; 165 } 166 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: unknown RF Bank %d requested\n", 167 __func__, bank); 168 return AH_NULL; 169 } 170 171 /* 172 * Reads EEPROM header info from device structure and programs 173 * all rf registers 174 * 175 * REQUIRES: Access to the analog rf device 176 */ 177 static HAL_BOOL 178 ar5112SetRfRegs(struct ath_hal *ah, 179 const struct ieee80211_channel *chan, 180 uint16_t modesIndex, uint16_t *rfXpdGain) 181 { 182 #define RF_BANK_SETUP(_priv, _ix, _col) do { \ 183 int i; \ 184 for (i = 0; i < N(ar5212Bank##_ix##_5112); i++) \ 185 (_priv)->Bank##_ix##Data[i] = ar5212Bank##_ix##_5112[i][_col];\ 186 } while (0) 187 uint16_t freq = ath_hal_gethwchannel(ah, chan); 188 struct ath_hal_5212 *ahp = AH5212(ah); 189 const HAL_EEPROM *ee = AH_PRIVATE(ah)->ah_eeprom; 190 uint16_t rfXpdSel, gainI; 191 uint16_t ob5GHz = 0, db5GHz = 0; 192 uint16_t ob2GHz = 0, db2GHz = 0; 193 struct ar5112State *priv = AR5112(ah); 194 GAIN_VALUES *gv = &ahp->ah_gainValues; 195 int regWrites = 0; 196 197 HALASSERT(priv); 198 199 HALDEBUG(ah, HAL_DEBUG_RFPARAM, "%s: chan %u/0x%x modesIndex %u\n", 200 __func__, chan->ic_freq, chan->ic_flags, modesIndex); 201 202 /* Setup rf parameters */ 203 switch (chan->ic_flags & IEEE80211_CHAN_ALLFULL) { 204 case IEEE80211_CHAN_A: 205 if (freq > 4000 && freq < 5260) { 206 ob5GHz = ee->ee_ob1; 207 db5GHz = ee->ee_db1; 208 } else if (freq >= 5260 && freq < 5500) { 209 ob5GHz = ee->ee_ob2; 210 db5GHz = ee->ee_db2; 211 } else if (freq >= 5500 && freq < 5725) { 212 ob5GHz = ee->ee_ob3; 213 db5GHz = ee->ee_db3; 214 } else if (freq >= 5725) { 215 ob5GHz = ee->ee_ob4; 216 db5GHz = ee->ee_db4; 217 } else { 218 /* XXX else */ 219 } 220 rfXpdSel = ee->ee_xpd[headerInfo11A]; 221 gainI = ee->ee_gainI[headerInfo11A]; 222 break; 223 case IEEE80211_CHAN_B: 224 ob2GHz = ee->ee_ob2GHz[0]; 225 db2GHz = ee->ee_db2GHz[0]; 226 rfXpdSel = ee->ee_xpd[headerInfo11B]; 227 gainI = ee->ee_gainI[headerInfo11B]; 228 break; 229 case IEEE80211_CHAN_G: 230 case IEEE80211_CHAN_PUREG: /* NB: really 108G */ 231 ob2GHz = ee->ee_ob2GHz[1]; 232 db2GHz = ee->ee_ob2GHz[1]; 233 rfXpdSel = ee->ee_xpd[headerInfo11G]; 234 gainI = ee->ee_gainI[headerInfo11G]; 235 break; 236 default: 237 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: invalid channel flags 0x%x\n", 238 __func__, chan->ic_flags); 239 return AH_FALSE; 240 } 241 242 /* Setup Bank 1 Write */ 243 RF_BANK_SETUP(priv, 1, 1); 244 245 /* Setup Bank 2 Write */ 246 RF_BANK_SETUP(priv, 2, modesIndex); 247 248 /* Setup Bank 3 Write */ 249 RF_BANK_SETUP(priv, 3, modesIndex); 250 251 /* Setup Bank 6 Write */ 252 RF_BANK_SETUP(priv, 6, modesIndex); 253 254 ar5212ModifyRfBuffer(priv->Bank6Data, rfXpdSel, 1, 302, 0); 255 256 ar5212ModifyRfBuffer(priv->Bank6Data, rfXpdGain[0], 2, 270, 0); 257 ar5212ModifyRfBuffer(priv->Bank6Data, rfXpdGain[1], 2, 257, 0); 258 259 if (IEEE80211_IS_CHAN_OFDM(chan)) { 260 ar5212ModifyRfBuffer(priv->Bank6Data, 261 gv->currStep->paramVal[GP_PWD_138], 1, 168, 3); 262 ar5212ModifyRfBuffer(priv->Bank6Data, 263 gv->currStep->paramVal[GP_PWD_137], 1, 169, 3); 264 ar5212ModifyRfBuffer(priv->Bank6Data, 265 gv->currStep->paramVal[GP_PWD_136], 1, 170, 3); 266 ar5212ModifyRfBuffer(priv->Bank6Data, 267 gv->currStep->paramVal[GP_PWD_132], 1, 174, 3); 268 ar5212ModifyRfBuffer(priv->Bank6Data, 269 gv->currStep->paramVal[GP_PWD_131], 1, 175, 3); 270 ar5212ModifyRfBuffer(priv->Bank6Data, 271 gv->currStep->paramVal[GP_PWD_130], 1, 176, 3); 272 } 273 274 /* Only the 5 or 2 GHz OB/DB need to be set for a mode */ 275 if (IEEE80211_IS_CHAN_2GHZ(chan)) { 276 ar5212ModifyRfBuffer(priv->Bank6Data, ob2GHz, 3, 287, 0); 277 ar5212ModifyRfBuffer(priv->Bank6Data, db2GHz, 3, 290, 0); 278 } else { 279 ar5212ModifyRfBuffer(priv->Bank6Data, ob5GHz, 3, 279, 0); 280 ar5212ModifyRfBuffer(priv->Bank6Data, db5GHz, 3, 282, 0); 281 } 282 283 /* Lower synth voltage for X112 Rev 2.0 only */ 284 if (IS_RADX112_REV2(ah)) { 285 /* Non-Reversed analyg registers - so values are pre-reversed */ 286 ar5212ModifyRfBuffer(priv->Bank6Data, 2, 2, 90, 2); 287 ar5212ModifyRfBuffer(priv->Bank6Data, 2, 2, 92, 2); 288 ar5212ModifyRfBuffer(priv->Bank6Data, 2, 2, 94, 2); 289 ar5212ModifyRfBuffer(priv->Bank6Data, 2, 1, 254, 2); 290 } 291 292 /* Decrease Power Consumption for 5312/5213 and up */ 293 if (AH_PRIVATE(ah)->ah_phyRev >= AR_PHY_CHIP_ID_REV_2) { 294 ar5212ModifyRfBuffer(priv->Bank6Data, 1, 1, 281, 1); 295 ar5212ModifyRfBuffer(priv->Bank6Data, 1, 2, 1, 3); 296 ar5212ModifyRfBuffer(priv->Bank6Data, 1, 2, 3, 3); 297 ar5212ModifyRfBuffer(priv->Bank6Data, 1, 1, 139, 3); 298 ar5212ModifyRfBuffer(priv->Bank6Data, 1, 1, 140, 3); 299 } 300 301 /* Setup Bank 7 Setup */ 302 RF_BANK_SETUP(priv, 7, modesIndex); 303 if (IEEE80211_IS_CHAN_OFDM(chan)) 304 ar5212ModifyRfBuffer(priv->Bank7Data, 305 gv->currStep->paramVal[GP_MIXGAIN_OVR], 2, 37, 0); 306 307 ar5212ModifyRfBuffer(priv->Bank7Data, gainI, 6, 14, 0); 308 309 /* Adjust params for Derby TX power control */ 310 if (IEEE80211_IS_CHAN_HALF(chan) || IEEE80211_IS_CHAN_QUARTER(chan)) { 311 uint32_t rfDelay, rfPeriod; 312 313 rfDelay = 0xf; 314 rfPeriod = (IEEE80211_IS_CHAN_HALF(chan)) ? 0x8 : 0xf; 315 ar5212ModifyRfBuffer(priv->Bank7Data, rfDelay, 4, 58, 0); 316 ar5212ModifyRfBuffer(priv->Bank7Data, rfPeriod, 4, 70, 0); 317 } 318 319 #ifdef notyet 320 /* Analog registers are setup - EAR can modify */ 321 if (ar5212IsEarEngaged(pDev, chan)) 322 uint32_t modifier; 323 ar5212EarModify(pDev, EAR_LC_RF_WRITE, chan, &modifier); 324 #endif 325 /* Write Analog registers */ 326 HAL_INI_WRITE_BANK(ah, ar5212Bank1_5112, priv->Bank1Data, regWrites); 327 HAL_INI_WRITE_BANK(ah, ar5212Bank2_5112, priv->Bank2Data, regWrites); 328 HAL_INI_WRITE_BANK(ah, ar5212Bank3_5112, priv->Bank3Data, regWrites); 329 HAL_INI_WRITE_BANK(ah, ar5212Bank6_5112, priv->Bank6Data, regWrites); 330 HAL_INI_WRITE_BANK(ah, ar5212Bank7_5112, priv->Bank7Data, regWrites); 331 332 /* Now that we have reprogrammed rfgain value, clear the flag. */ 333 ahp->ah_rfgainState = HAL_RFGAIN_INACTIVE; 334 return AH_TRUE; 335 #undef RF_BANK_SETUP 336 } 337 338 /* 339 * Read the transmit power levels from the structures taken from EEPROM 340 * Interpolate read transmit power values for this channel 341 * Organize the transmit power values into a table for writing into the hardware 342 */ 343 static HAL_BOOL 344 ar5112SetPowerTable(struct ath_hal *ah, 345 int16_t *pPowerMin, int16_t *pPowerMax, 346 const struct ieee80211_channel *chan, 347 uint16_t *rfXpdGain) 348 { 349 uint16_t freq = ath_hal_gethwchannel(ah, chan); 350 struct ath_hal_5212 *ahp = AH5212(ah); 351 const HAL_EEPROM *ee = AH_PRIVATE(ah)->ah_eeprom; 352 uint32_t numXpdGain = IS_RADX112_REV2(ah) ? 2 : 1; 353 uint32_t xpdGainMask = 0; 354 int16_t powerMid, *pPowerMid = &powerMid; 355 356 const EXPN_DATA_PER_CHANNEL_5112 *pRawCh; 357 const EEPROM_POWER_EXPN_5112 *pPowerExpn = AH_NULL; 358 359 uint32_t ii, jj, kk; 360 int16_t minPwr_t4, maxPwr_t4, Pmin, Pmid; 361 362 uint32_t chan_idx_L = 0, chan_idx_R = 0; 363 uint16_t chan_L, chan_R; 364 365 int16_t pwr_table0[64]; 366 int16_t pwr_table1[64]; 367 uint16_t pcdacs[10]; 368 int16_t powers[10]; 369 uint16_t numPcd; 370 int16_t powTableLXPD[2][64]; 371 int16_t powTableHXPD[2][64]; 372 int16_t tmpPowerTable[64]; 373 uint16_t xgainList[2]; 374 uint16_t xpdMask; 375 376 switch (chan->ic_flags & IEEE80211_CHAN_ALLTURBOFULL) { 377 case IEEE80211_CHAN_A: 378 case IEEE80211_CHAN_ST: 379 pPowerExpn = &ee->ee_modePowerArray5112[headerInfo11A]; 380 xpdGainMask = ee->ee_xgain[headerInfo11A]; 381 break; 382 case IEEE80211_CHAN_B: 383 pPowerExpn = &ee->ee_modePowerArray5112[headerInfo11B]; 384 xpdGainMask = ee->ee_xgain[headerInfo11B]; 385 break; 386 case IEEE80211_CHAN_G: 387 case IEEE80211_CHAN_108G: 388 pPowerExpn = &ee->ee_modePowerArray5112[headerInfo11G]; 389 xpdGainMask = ee->ee_xgain[headerInfo11G]; 390 break; 391 default: 392 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: unknown channel flags 0x%x\n", 393 __func__, chan->ic_flags); 394 return AH_FALSE; 395 } 396 397 if ((xpdGainMask & pPowerExpn->xpdMask) < 1) { 398 HALDEBUG(ah, HAL_DEBUG_ANY, 399 "%s: desired xpdGainMask 0x%x not supported by " 400 "calibrated xpdMask 0x%x\n", __func__, 401 xpdGainMask, pPowerExpn->xpdMask); 402 return AH_FALSE; 403 } 404 405 maxPwr_t4 = (int16_t)(2*(*pPowerMax)); /* pwr_t2 -> pwr_t4 */ 406 minPwr_t4 = (int16_t)(2*(*pPowerMin)); /* pwr_t2 -> pwr_t4 */ 407 408 xgainList[0] = 0xDEAD; 409 xgainList[1] = 0xDEAD; 410 411 kk = 0; 412 xpdMask = pPowerExpn->xpdMask; 413 for (jj = 0; jj < NUM_XPD_PER_CHANNEL; jj++) { 414 if (((xpdMask >> jj) & 1) > 0) { 415 if (kk > 1) { 416 HALDEBUG(ah, HAL_DEBUG_ANY, 417 "A maximum of 2 xpdGains supported" 418 "in pExpnPower data\n"); 419 return AH_FALSE; 420 } 421 xgainList[kk++] = (uint16_t)jj; 422 } 423 } 424 425 ar5212GetLowerUpperIndex(freq, &pPowerExpn->pChannels[0], 426 pPowerExpn->numChannels, &chan_idx_L, &chan_idx_R); 427 428 kk = 0; 429 for (ii = chan_idx_L; ii <= chan_idx_R; ii++) { 430 pRawCh = &(pPowerExpn->pDataPerChannel[ii]); 431 if (xgainList[1] == 0xDEAD) { 432 jj = xgainList[0]; 433 numPcd = pRawCh->pDataPerXPD[jj].numPcdacs; 434 OS_MEMCPY(&pcdacs[0], &pRawCh->pDataPerXPD[jj].pcdac[0], 435 numPcd * sizeof(uint16_t)); 436 OS_MEMCPY(&powers[0], &pRawCh->pDataPerXPD[jj].pwr_t4[0], 437 numPcd * sizeof(int16_t)); 438 if (!getFullPwrTable(numPcd, &pcdacs[0], &powers[0], 439 pRawCh->maxPower_t4, &tmpPowerTable[0])) { 440 return AH_FALSE; 441 } 442 OS_MEMCPY(&powTableLXPD[kk][0], &tmpPowerTable[0], 443 64*sizeof(int16_t)); 444 } else { 445 jj = xgainList[0]; 446 numPcd = pRawCh->pDataPerXPD[jj].numPcdacs; 447 OS_MEMCPY(&pcdacs[0], &pRawCh->pDataPerXPD[jj].pcdac[0], 448 numPcd*sizeof(uint16_t)); 449 OS_MEMCPY(&powers[0], 450 &pRawCh->pDataPerXPD[jj].pwr_t4[0], 451 numPcd*sizeof(int16_t)); 452 if (!getFullPwrTable(numPcd, &pcdacs[0], &powers[0], 453 pRawCh->maxPower_t4, &tmpPowerTable[0])) { 454 return AH_FALSE; 455 } 456 OS_MEMCPY(&powTableLXPD[kk][0], &tmpPowerTable[0], 457 64 * sizeof(int16_t)); 458 459 jj = xgainList[1]; 460 numPcd = pRawCh->pDataPerXPD[jj].numPcdacs; 461 OS_MEMCPY(&pcdacs[0], &pRawCh->pDataPerXPD[jj].pcdac[0], 462 numPcd * sizeof(uint16_t)); 463 OS_MEMCPY(&powers[0], 464 &pRawCh->pDataPerXPD[jj].pwr_t4[0], 465 numPcd * sizeof(int16_t)); 466 if (!getFullPwrTable(numPcd, &pcdacs[0], &powers[0], 467 pRawCh->maxPower_t4, &tmpPowerTable[0])) { 468 return AH_FALSE; 469 } 470 OS_MEMCPY(&powTableHXPD[kk][0], &tmpPowerTable[0], 471 64 * sizeof(int16_t)); 472 } 473 kk++; 474 } 475 476 chan_L = pPowerExpn->pChannels[chan_idx_L]; 477 chan_R = pPowerExpn->pChannels[chan_idx_R]; 478 kk = chan_idx_R - chan_idx_L; 479 480 if (xgainList[1] == 0xDEAD) { 481 for (jj = 0; jj < 64; jj++) { 482 pwr_table0[jj] = interpolate_signed( 483 freq, chan_L, chan_R, 484 powTableLXPD[0][jj], powTableLXPD[kk][jj]); 485 } 486 Pmin = getPminAndPcdacTableFromPowerTable(&pwr_table0[0], 487 ahp->ah_pcdacTable); 488 *pPowerMin = (int16_t) (Pmin / 2); 489 *pPowerMid = (int16_t) (pwr_table0[63] / 2); 490 *pPowerMax = (int16_t) (pwr_table0[63] / 2); 491 rfXpdGain[0] = xgainList[0]; 492 rfXpdGain[1] = rfXpdGain[0]; 493 } else { 494 for (jj = 0; jj < 64; jj++) { 495 pwr_table0[jj] = interpolate_signed( 496 freq, chan_L, chan_R, 497 powTableLXPD[0][jj], powTableLXPD[kk][jj]); 498 pwr_table1[jj] = interpolate_signed( 499 freq, chan_L, chan_R, 500 powTableHXPD[0][jj], powTableHXPD[kk][jj]); 501 } 502 if (numXpdGain == 2) { 503 Pmin = getPminAndPcdacTableFromTwoPowerTables( 504 &pwr_table0[0], &pwr_table1[0], 505 ahp->ah_pcdacTable, &Pmid); 506 *pPowerMin = (int16_t) (Pmin / 2); 507 *pPowerMid = (int16_t) (Pmid / 2); 508 *pPowerMax = (int16_t) (pwr_table0[63] / 2); 509 rfXpdGain[0] = xgainList[0]; 510 rfXpdGain[1] = xgainList[1]; 511 } else if (minPwr_t4 <= pwr_table1[63] && 512 maxPwr_t4 <= pwr_table1[63]) { 513 Pmin = getPminAndPcdacTableFromPowerTable( 514 &pwr_table1[0], ahp->ah_pcdacTable); 515 rfXpdGain[0] = xgainList[1]; 516 rfXpdGain[1] = rfXpdGain[0]; 517 *pPowerMin = (int16_t) (Pmin / 2); 518 *pPowerMid = (int16_t) (pwr_table1[63] / 2); 519 *pPowerMax = (int16_t) (pwr_table1[63] / 2); 520 } else { 521 Pmin = getPminAndPcdacTableFromPowerTable( 522 &pwr_table0[0], ahp->ah_pcdacTable); 523 rfXpdGain[0] = xgainList[0]; 524 rfXpdGain[1] = rfXpdGain[0]; 525 *pPowerMin = (int16_t) (Pmin/2); 526 *pPowerMid = (int16_t) (pwr_table0[63] / 2); 527 *pPowerMax = (int16_t) (pwr_table0[63] / 2); 528 } 529 } 530 531 /* 532 * Move 5112 rates to match power tables where the max 533 * power table entry corresponds with maxPower. 534 */ 535 HALASSERT(*pPowerMax <= PCDAC_STOP); 536 ahp->ah_txPowerIndexOffset = PCDAC_STOP - *pPowerMax; 537 538 return AH_TRUE; 539 } 540 541 /* 542 * Returns interpolated or the scaled up interpolated value 543 */ 544 static int16_t 545 interpolate_signed(uint16_t target, uint16_t srcLeft, uint16_t srcRight, 546 int16_t targetLeft, int16_t targetRight) 547 { 548 int16_t rv; 549 550 if (srcRight != srcLeft) { 551 rv = ((target - srcLeft)*targetRight + 552 (srcRight - target)*targetLeft) / (srcRight - srcLeft); 553 } else { 554 rv = targetLeft; 555 } 556 return rv; 557 } 558 559 /* 560 * Return indices surrounding the value in sorted integer lists. 561 * 562 * NB: the input list is assumed to be sorted in ascending order 563 */ 564 static void 565 ar5212GetLowerUpperIndex(uint16_t v, uint16_t *lp, uint16_t listSize, 566 uint32_t *vlo, uint32_t *vhi) 567 { 568 uint32_t target = v; 569 uint16_t *ep = lp+listSize; 570 uint16_t *tp; 571 572 /* 573 * Check first and last elements for out-of-bounds conditions. 574 */ 575 if (target < lp[0]) { 576 *vlo = *vhi = 0; 577 return; 578 } 579 if (target >= ep[-1]) { 580 *vlo = *vhi = listSize - 1; 581 return; 582 } 583 584 /* look for value being near or between 2 values in list */ 585 for (tp = lp; tp < ep; tp++) { 586 /* 587 * If value is close to the current value of the list 588 * then target is not between values, it is one of the values 589 */ 590 if (*tp == target) { 591 *vlo = *vhi = tp - lp; 592 return; 593 } 594 /* 595 * Look for value being between current value and next value 596 * if so return these 2 values 597 */ 598 if (target < tp[1]) { 599 *vlo = tp - lp; 600 *vhi = *vlo + 1; 601 return; 602 } 603 } 604 } 605 606 static HAL_BOOL 607 getFullPwrTable(uint16_t numPcdacs, uint16_t *pcdacs, int16_t *power, int16_t maxPower, int16_t *retVals) 608 { 609 uint16_t ii; 610 uint16_t idxL = 0; 611 uint16_t idxR = 1; 612 613 if (numPcdacs < 2) { 614 HALDEBUG(AH_NULL, HAL_DEBUG_ANY, 615 "%s: at least 2 pcdac values needed [%d]\n", 616 __func__, numPcdacs); 617 return AH_FALSE; 618 } 619 for (ii = 0; ii < 64; ii++) { 620 if (ii>pcdacs[idxR] && idxR < numPcdacs-1) { 621 idxL++; 622 idxR++; 623 } 624 retVals[ii] = interpolate_signed(ii, 625 pcdacs[idxL], pcdacs[idxR], power[idxL], power[idxR]); 626 if (retVals[ii] >= maxPower) { 627 while (ii < 64) 628 retVals[ii++] = maxPower; 629 } 630 } 631 return AH_TRUE; 632 } 633 634 /* 635 * Takes a single calibration curve and creates a power table. 636 * Adjusts the new power table so the max power is relative 637 * to the maximum index in the power table. 638 * 639 * WARNING: rates must be adjusted for this relative power table 640 */ 641 static int16_t 642 getPminAndPcdacTableFromPowerTable(int16_t *pwrTableT4, uint16_t retVals[]) 643 { 644 int16_t ii, jj, jjMax; 645 int16_t pMin, currPower, pMax; 646 647 /* If the spread is > 31.5dB, keep the upper 31.5dB range */ 648 if ((pwrTableT4[63] - pwrTableT4[0]) > 126) { 649 pMin = pwrTableT4[63] - 126; 650 } else { 651 pMin = pwrTableT4[0]; 652 } 653 654 pMax = pwrTableT4[63]; 655 jjMax = 63; 656 657 /* Search for highest pcdac 0.25dB below maxPower */ 658 while ((pwrTableT4[jjMax] > (pMax - 1) ) && (jjMax >= 0)) { 659 jjMax--; 660 } 661 662 jj = jjMax; 663 currPower = pMax; 664 for (ii = 63; ii >= 0; ii--) { 665 while ((jj < 64) && (jj > 0) && (pwrTableT4[jj] >= currPower)) { 666 jj--; 667 } 668 if (jj == 0) { 669 while (ii >= 0) { 670 retVals[ii] = retVals[ii + 1]; 671 ii--; 672 } 673 break; 674 } 675 retVals[ii] = jj; 676 currPower -= 2; // corresponds to a 0.5dB step 677 } 678 return pMin; 679 } 680 681 /* 682 * Combines the XPD curves from two calibration sets into a single 683 * power table and adjusts the power table so the max power is relative 684 * to the maximum index in the power table 685 * 686 * WARNING: rates must be adjusted for this relative power table 687 */ 688 static int16_t 689 getPminAndPcdacTableFromTwoPowerTables(int16_t *pwrTableLXpdT4, 690 int16_t *pwrTableHXpdT4, uint16_t retVals[], int16_t *pMid) 691 { 692 int16_t ii, jj, jjMax; 693 int16_t pMin, pMax, currPower; 694 int16_t *pwrTableT4; 695 uint16_t msbFlag = 0x40; // turns on the 7th bit of the pcdac 696 697 /* If the spread is > 31.5dB, keep the upper 31.5dB range */ 698 if ((pwrTableLXpdT4[63] - pwrTableHXpdT4[0]) > 126) { 699 pMin = pwrTableLXpdT4[63] - 126; 700 } else { 701 pMin = pwrTableHXpdT4[0]; 702 } 703 704 pMax = pwrTableLXpdT4[63]; 705 jjMax = 63; 706 /* Search for highest pcdac 0.25dB below maxPower */ 707 while ((pwrTableLXpdT4[jjMax] > (pMax - 1) ) && (jjMax >= 0)){ 708 jjMax--; 709 } 710 711 *pMid = pwrTableHXpdT4[63]; 712 jj = jjMax; 713 ii = 63; 714 currPower = pMax; 715 pwrTableT4 = &(pwrTableLXpdT4[0]); 716 while (ii >= 0) { 717 if ((currPower <= *pMid) || ( (jj == 0) && (msbFlag == 0x40))){ 718 msbFlag = 0x00; 719 pwrTableT4 = &(pwrTableHXpdT4[0]); 720 jj = 63; 721 } 722 while ((jj > 0) && (pwrTableT4[jj] >= currPower)) { 723 jj--; 724 } 725 if ((jj == 0) && (msbFlag == 0x00)) { 726 while (ii >= 0) { 727 retVals[ii] = retVals[ii+1]; 728 ii--; 729 } 730 break; 731 } 732 retVals[ii] = jj | msbFlag; 733 currPower -= 2; // corresponds to a 0.5dB step 734 ii--; 735 } 736 return pMin; 737 } 738 739 static int16_t 740 ar5112GetMinPower(struct ath_hal *ah, const EXPN_DATA_PER_CHANNEL_5112 *data) 741 { 742 int i, minIndex; 743 int16_t minGain,minPwr,minPcdac,retVal; 744 745 /* Assume NUM_POINTS_XPD0 > 0 */ 746 minGain = data->pDataPerXPD[0].xpd_gain; 747 for (minIndex=0,i=1; i<NUM_XPD_PER_CHANNEL; i++) { 748 if (data->pDataPerXPD[i].xpd_gain < minGain) { 749 minIndex = i; 750 minGain = data->pDataPerXPD[i].xpd_gain; 751 } 752 } 753 minPwr = data->pDataPerXPD[minIndex].pwr_t4[0]; 754 minPcdac = data->pDataPerXPD[minIndex].pcdac[0]; 755 for (i=1; i<NUM_POINTS_XPD0; i++) { 756 if (data->pDataPerXPD[minIndex].pwr_t4[i] < minPwr) { 757 minPwr = data->pDataPerXPD[minIndex].pwr_t4[i]; 758 minPcdac = data->pDataPerXPD[minIndex].pcdac[i]; 759 } 760 } 761 retVal = minPwr - (minPcdac*2); 762 return(retVal); 763 } 764 765 static HAL_BOOL 766 ar5112GetChannelMaxMinPower(struct ath_hal *ah, 767 const struct ieee80211_channel *chan, 768 int16_t *maxPow, int16_t *minPow) 769 { 770 uint16_t freq = chan->ic_freq; /* NB: never mapped */ 771 const HAL_EEPROM *ee = AH_PRIVATE(ah)->ah_eeprom; 772 int numChannels=0,i,last; 773 int totalD, totalF,totalMin; 774 const EXPN_DATA_PER_CHANNEL_5112 *data=AH_NULL; 775 const EEPROM_POWER_EXPN_5112 *powerArray=AH_NULL; 776 777 *maxPow = 0; 778 if (IEEE80211_IS_CHAN_A(chan)) { 779 powerArray = ee->ee_modePowerArray5112; 780 data = powerArray[headerInfo11A].pDataPerChannel; 781 numChannels = powerArray[headerInfo11A].numChannels; 782 } else if (IEEE80211_IS_CHAN_G(chan) || IEEE80211_IS_CHAN_108G(chan)) { 783 /* XXX - is this correct? Should we also use the same power for turbo G? */ 784 powerArray = ee->ee_modePowerArray5112; 785 data = powerArray[headerInfo11G].pDataPerChannel; 786 numChannels = powerArray[headerInfo11G].numChannels; 787 } else if (IEEE80211_IS_CHAN_B(chan)) { 788 powerArray = ee->ee_modePowerArray5112; 789 data = powerArray[headerInfo11B].pDataPerChannel; 790 numChannels = powerArray[headerInfo11B].numChannels; 791 } else { 792 return (AH_TRUE); 793 } 794 /* Make sure the channel is in the range of the TP values 795 * (freq piers) 796 */ 797 if (numChannels < 1) 798 return(AH_FALSE); 799 800 if ((freq < data[0].channelValue) || 801 (freq > data[numChannels-1].channelValue)) { 802 if (freq < data[0].channelValue) { 803 *maxPow = data[0].maxPower_t4; 804 *minPow = ar5112GetMinPower(ah, &data[0]); 805 return(AH_TRUE); 806 } else { 807 *maxPow = data[numChannels - 1].maxPower_t4; 808 *minPow = ar5112GetMinPower(ah, &data[numChannels - 1]); 809 return(AH_TRUE); 810 } 811 } 812 813 /* Linearly interpolate the power value now */ 814 for (last=0,i=0; 815 (i<numChannels) && (freq > data[i].channelValue); 816 last=i++); 817 totalD = data[i].channelValue - data[last].channelValue; 818 if (totalD > 0) { 819 totalF = data[i].maxPower_t4 - data[last].maxPower_t4; 820 *maxPow = (int8_t) ((totalF*(freq-data[last].channelValue) + data[last].maxPower_t4*totalD)/totalD); 821 822 totalMin = ar5112GetMinPower(ah,&data[i]) - ar5112GetMinPower(ah, &data[last]); 823 *minPow = (int8_t) ((totalMin*(freq-data[last].channelValue) + ar5112GetMinPower(ah, &data[last])*totalD)/totalD); 824 return (AH_TRUE); 825 } else { 826 if (freq == data[i].channelValue) { 827 *maxPow = data[i].maxPower_t4; 828 *minPow = ar5112GetMinPower(ah, &data[i]); 829 return(AH_TRUE); 830 } else 831 return(AH_FALSE); 832 } 833 } 834 835 /* 836 * Free memory for analog bank scratch buffers 837 */ 838 static void 839 ar5112RfDetach(struct ath_hal *ah) 840 { 841 struct ath_hal_5212 *ahp = AH5212(ah); 842 843 HALASSERT(ahp->ah_rfHal != AH_NULL); 844 ath_hal_free(ahp->ah_rfHal); 845 ahp->ah_rfHal = AH_NULL; 846 } 847 848 /* 849 * Allocate memory for analog bank scratch buffers 850 * Scratch Buffer will be reinitialized every reset so no need to zero now 851 */ 852 static HAL_BOOL 853 ar5112RfAttach(struct ath_hal *ah, HAL_STATUS *status) 854 { 855 struct ath_hal_5212 *ahp = AH5212(ah); 856 struct ar5112State *priv; 857 858 HALASSERT(ah->ah_magic == AR5212_MAGIC); 859 860 HALASSERT(ahp->ah_rfHal == AH_NULL); 861 priv = ath_hal_malloc(sizeof(struct ar5112State)); 862 if (priv == AH_NULL) { 863 HALDEBUG(ah, HAL_DEBUG_ANY, 864 "%s: cannot allocate private state\n", __func__); 865 *status = HAL_ENOMEM; /* XXX */ 866 return AH_FALSE; 867 } 868 priv->base.rfDetach = ar5112RfDetach; 869 priv->base.writeRegs = ar5112WriteRegs; 870 priv->base.getRfBank = ar5112GetRfBank; 871 priv->base.setChannel = ar5112SetChannel; 872 priv->base.setRfRegs = ar5112SetRfRegs; 873 priv->base.setPowerTable = ar5112SetPowerTable; 874 priv->base.getChannelMaxMinPower = ar5112GetChannelMaxMinPower; 875 priv->base.getNfAdjust = ar5212GetNfAdjust; 876 877 ahp->ah_pcdacTable = priv->pcdacTable; 878 ahp->ah_pcdacTableSize = sizeof(priv->pcdacTable); 879 ahp->ah_rfHal = &priv->base; 880 881 return AH_TRUE; 882 } 883 884 static HAL_BOOL 885 ar5112Probe(struct ath_hal *ah) 886 { 887 return IS_RAD5112(ah); 888 } 889 AH_RF(RF5112, ar5112Probe, ar5112RfAttach); 890