xref: /freebsd/sys/dev/ath/ath_hal/ar5211/ar5211_xmit.c (revision cfd6422a5217410fbd66f7a7a8a64d9d85e61229)
1 /*-
2  * SPDX-License-Identifier: ISC
3  *
4  * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
5  * Copyright (c) 2002-2006 Atheros Communications, Inc.
6  *
7  * Permission to use, copy, modify, and/or distribute this software for any
8  * purpose with or without fee is hereby granted, provided that the above
9  * copyright notice and this permission notice appear in all copies.
10  *
11  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
12  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
13  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
14  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
15  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
16  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
17  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
18  *
19  * $FreeBSD$
20  */
21 #include "opt_ah.h"
22 
23 #include "ah.h"
24 #include "ah_internal.h"
25 #include "ah_desc.h"
26 
27 #include "ar5211/ar5211.h"
28 #include "ar5211/ar5211reg.h"
29 #include "ar5211/ar5211desc.h"
30 
31 /*
32  * Update Tx FIFO trigger level.
33  *
34  * Set bIncTrigLevel to TRUE to increase the trigger level.
35  * Set bIncTrigLevel to FALSE to decrease the trigger level.
36  *
37  * Returns TRUE if the trigger level was updated
38  */
39 HAL_BOOL
40 ar5211UpdateTxTrigLevel(struct ath_hal *ah, HAL_BOOL bIncTrigLevel)
41 {
42 	uint32_t curTrigLevel, txcfg;
43 	HAL_INT ints = ar5211GetInterrupts(ah);
44 
45 	/*
46 	 * Disable chip interrupts. This is because halUpdateTxTrigLevel
47 	 * is called from both ISR and non-ISR contexts.
48 	 */
49 	ar5211SetInterrupts(ah, ints &~ HAL_INT_GLOBAL);
50 	txcfg = OS_REG_READ(ah, AR_TXCFG);
51 	curTrigLevel = (txcfg & AR_TXCFG_FTRIG_M) >> AR_TXCFG_FTRIG_S;
52 	if (bIncTrigLevel){
53 		/* increase the trigger level */
54 		curTrigLevel = curTrigLevel +
55 			((MAX_TX_FIFO_THRESHOLD - curTrigLevel) / 2);
56 	} else {
57 		/* decrease the trigger level if not already at the minimum */
58 		if (curTrigLevel > MIN_TX_FIFO_THRESHOLD) {
59 			/* decrease the trigger level */
60 			curTrigLevel--;
61 		} else {
62 			/* no update to the trigger level */
63 			/* re-enable chip interrupts */
64 			ar5211SetInterrupts(ah, ints);
65 			return AH_FALSE;
66 		}
67 	}
68 	/* Update the trigger level */
69 	OS_REG_WRITE(ah, AR_TXCFG, (txcfg &~ AR_TXCFG_FTRIG_M) |
70 		((curTrigLevel << AR_TXCFG_FTRIG_S) & AR_TXCFG_FTRIG_M));
71 	/* re-enable chip interrupts */
72 	ar5211SetInterrupts(ah, ints);
73 	return AH_TRUE;
74 }
75 
76 /*
77  * Set the properties of the tx queue with the parameters
78  * from qInfo.  The queue must previously have been setup
79  * with a call to ar5211SetupTxQueue.
80  */
81 HAL_BOOL
82 ar5211SetTxQueueProps(struct ath_hal *ah, int q, const HAL_TXQ_INFO *qInfo)
83 {
84 	struct ath_hal_5211 *ahp = AH5211(ah);
85 
86 	if (q >= HAL_NUM_TX_QUEUES) {
87 		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: invalid queue num %u\n",
88 		    __func__, q);
89 		return AH_FALSE;
90 	}
91 	return ath_hal_setTxQProps(ah, &ahp->ah_txq[q], qInfo);
92 }
93 
94 /*
95  * Return the properties for the specified tx queue.
96  */
97 HAL_BOOL
98 ar5211GetTxQueueProps(struct ath_hal *ah, int q, HAL_TXQ_INFO *qInfo)
99 {
100 	struct ath_hal_5211 *ahp = AH5211(ah);
101 
102 	if (q >= HAL_NUM_TX_QUEUES) {
103 		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: invalid queue num %u\n",
104 		    __func__, q);
105 		return AH_FALSE;
106 	}
107 	return ath_hal_getTxQProps(ah, qInfo, &ahp->ah_txq[q]);
108 }
109 
110 /*
111  * Allocate and initialize a tx DCU/QCU combination.
112  */
113 int
114 ar5211SetupTxQueue(struct ath_hal *ah, HAL_TX_QUEUE type,
115 	const HAL_TXQ_INFO *qInfo)
116 {
117 	struct ath_hal_5211 *ahp = AH5211(ah);
118 	HAL_TX_QUEUE_INFO *qi;
119 	int q;
120 
121 	switch (type) {
122 	case HAL_TX_QUEUE_BEACON:
123 		q = 9;
124 		break;
125 	case HAL_TX_QUEUE_CAB:
126 		q = 8;
127 		break;
128 	case HAL_TX_QUEUE_DATA:
129 		q = 0;
130 		if (ahp->ah_txq[q].tqi_type != HAL_TX_QUEUE_INACTIVE)
131 			return q;
132 		break;
133 	default:
134 		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: bad tx queue type %u\n",
135 		    __func__, type);
136 		return -1;
137 	}
138 
139 	HALDEBUG(ah, HAL_DEBUG_TXQUEUE, "%s: queue %u\n", __func__, q);
140 
141 	qi = &ahp->ah_txq[q];
142 	if (qi->tqi_type != HAL_TX_QUEUE_INACTIVE) {
143 		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: tx queue %u already active\n",
144 		    __func__, q);
145 		return -1;
146 	}
147 	OS_MEMZERO(qi, sizeof(HAL_TX_QUEUE_INFO));
148 	qi->tqi_type = type;
149 	if (qInfo == AH_NULL) {
150 		/* by default enable OK+ERR+DESC+URN interrupts */
151 		qi->tqi_qflags =
152 			  HAL_TXQ_TXOKINT_ENABLE
153 			| HAL_TXQ_TXERRINT_ENABLE
154 			| HAL_TXQ_TXDESCINT_ENABLE
155 			| HAL_TXQ_TXURNINT_ENABLE
156 			;
157 		qi->tqi_aifs = INIT_AIFS;
158 		qi->tqi_cwmin = HAL_TXQ_USEDEFAULT;	/* NB: do at reset */
159 		qi->tqi_cwmax = INIT_CWMAX;
160 		qi->tqi_shretry = INIT_SH_RETRY;
161 		qi->tqi_lgretry = INIT_LG_RETRY;
162 	} else
163 		(void) ar5211SetTxQueueProps(ah, q, qInfo);
164 	return q;
165 }
166 
167 /*
168  * Update the h/w interrupt registers to reflect a tx q's configuration.
169  */
170 static void
171 setTxQInterrupts(struct ath_hal *ah, HAL_TX_QUEUE_INFO *qi)
172 {
173 	struct ath_hal_5211 *ahp = AH5211(ah);
174 
175 	HALDEBUG(ah, HAL_DEBUG_TXQUEUE,
176 	    "%s: tx ok 0x%x err 0x%x desc 0x%x eol 0x%x urn 0x%x\n", __func__
177 		, ahp->ah_txOkInterruptMask
178 		, ahp->ah_txErrInterruptMask
179 		, ahp->ah_txDescInterruptMask
180 		, ahp->ah_txEolInterruptMask
181 		, ahp->ah_txUrnInterruptMask
182 	);
183 
184 	OS_REG_WRITE(ah, AR_IMR_S0,
185 		  SM(ahp->ah_txOkInterruptMask, AR_IMR_S0_QCU_TXOK)
186 		| SM(ahp->ah_txDescInterruptMask, AR_IMR_S0_QCU_TXDESC)
187 	);
188 	OS_REG_WRITE(ah, AR_IMR_S1,
189 		  SM(ahp->ah_txErrInterruptMask, AR_IMR_S1_QCU_TXERR)
190 		| SM(ahp->ah_txEolInterruptMask, AR_IMR_S1_QCU_TXEOL)
191 	);
192 	OS_REG_RMW_FIELD(ah, AR_IMR_S2,
193 		AR_IMR_S2_QCU_TXURN, ahp->ah_txUrnInterruptMask);
194 }
195 
196 /*
197  * Free a tx DCU/QCU combination.
198  */
199 HAL_BOOL
200 ar5211ReleaseTxQueue(struct ath_hal *ah, u_int q)
201 {
202 	struct ath_hal_5211 *ahp = AH5211(ah);
203 	HAL_TX_QUEUE_INFO *qi;
204 
205 	if (q >= HAL_NUM_TX_QUEUES) {
206 		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: invalid queue num %u\n",
207 		    __func__, q);
208 		return AH_FALSE;
209 	}
210 	qi = &ahp->ah_txq[q];
211 	if (qi->tqi_type == HAL_TX_QUEUE_INACTIVE) {
212 		HALDEBUG(ah, HAL_DEBUG_TXQUEUE, "%s: inactive queue %u\n",
213 		    __func__, q);
214 		return AH_FALSE;
215 	}
216 
217 	HALDEBUG(ah, HAL_DEBUG_TXQUEUE, "%s: release queue %u\n", __func__, q);
218 
219 	qi->tqi_type = HAL_TX_QUEUE_INACTIVE;
220 	ahp->ah_txOkInterruptMask &= ~(1 << q);
221 	ahp->ah_txErrInterruptMask &= ~(1 << q);
222 	ahp->ah_txDescInterruptMask &= ~(1 << q);
223 	ahp->ah_txEolInterruptMask &= ~(1 << q);
224 	ahp->ah_txUrnInterruptMask &= ~(1 << q);
225 	setTxQInterrupts(ah, qi);
226 
227 	return AH_TRUE;
228 }
229 
230 /*
231  * Set the retry, aifs, cwmin/max, readyTime regs for specified queue
232  */
233 HAL_BOOL
234 ar5211ResetTxQueue(struct ath_hal *ah, u_int q)
235 {
236 	struct ath_hal_5211 *ahp = AH5211(ah);
237 	const struct ieee80211_channel *chan = AH_PRIVATE(ah)->ah_curchan;
238 	HAL_TX_QUEUE_INFO *qi;
239 	uint32_t cwMin, chanCwMin, value;
240 
241 	if (q >= HAL_NUM_TX_QUEUES) {
242 		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: invalid queue num %u\n",
243 		    __func__, q);
244 		return AH_FALSE;
245 	}
246 	qi = &ahp->ah_txq[q];
247 	if (qi->tqi_type == HAL_TX_QUEUE_INACTIVE) {
248 		HALDEBUG(ah, HAL_DEBUG_TXQUEUE, "%s: inactive queue %u\n",
249 		    __func__, q);
250 		return AH_TRUE;		/* XXX??? */
251 	}
252 
253 	if (qi->tqi_cwmin == HAL_TXQ_USEDEFAULT) {
254 		/*
255 		 * Select cwmin according to channel type.
256 		 * NB: chan can be NULL during attach
257 		 */
258 		if (chan && IEEE80211_IS_CHAN_B(chan))
259 			chanCwMin = INIT_CWMIN_11B;
260 		else
261 			chanCwMin = INIT_CWMIN;
262 		/* make sure that the CWmin is of the form (2^n - 1) */
263 		for (cwMin = 1; cwMin < chanCwMin; cwMin = (cwMin << 1) | 1)
264 			;
265 	} else
266 		cwMin = qi->tqi_cwmin;
267 
268 	/* set cwMin/Max and AIFS values */
269 	OS_REG_WRITE(ah, AR_DLCL_IFS(q),
270 		  SM(cwMin, AR_D_LCL_IFS_CWMIN)
271 		| SM(qi->tqi_cwmax, AR_D_LCL_IFS_CWMAX)
272 		| SM(qi->tqi_aifs, AR_D_LCL_IFS_AIFS));
273 
274 	/* Set retry limit values */
275 	OS_REG_WRITE(ah, AR_DRETRY_LIMIT(q),
276 		   SM(INIT_SSH_RETRY, AR_D_RETRY_LIMIT_STA_SH)
277 		 | SM(INIT_SLG_RETRY, AR_D_RETRY_LIMIT_STA_LG)
278 		 | SM(qi->tqi_lgretry, AR_D_RETRY_LIMIT_FR_LG)
279 		 | SM(qi->tqi_shretry, AR_D_RETRY_LIMIT_FR_SH)
280 	);
281 
282 	/* enable early termination on the QCU */
283 	OS_REG_WRITE(ah, AR_QMISC(q), AR_Q_MISC_DCU_EARLY_TERM_REQ);
284 
285 	if (AH_PRIVATE(ah)->ah_macVersion < AR_SREV_VERSION_OAHU) {
286 		/* Configure DCU to use the global sequence count */
287 		OS_REG_WRITE(ah, AR_DMISC(q), AR5311_D_MISC_SEQ_NUM_CONTROL);
288 	}
289 	/* multiqueue support */
290 	if (qi->tqi_cbrPeriod) {
291 		OS_REG_WRITE(ah, AR_QCBRCFG(q),
292 			  SM(qi->tqi_cbrPeriod,AR_Q_CBRCFG_CBR_INTERVAL)
293 			| SM(qi->tqi_cbrOverflowLimit, AR_Q_CBRCFG_CBR_OVF_THRESH));
294 		OS_REG_WRITE(ah, AR_QMISC(q),
295 			OS_REG_READ(ah, AR_QMISC(q)) |
296 			AR_Q_MISC_FSP_CBR |
297 			(qi->tqi_cbrOverflowLimit ?
298 				AR_Q_MISC_CBR_EXP_CNTR_LIMIT : 0));
299 	}
300 	if (qi->tqi_readyTime) {
301 		OS_REG_WRITE(ah, AR_QRDYTIMECFG(q),
302 			SM(qi->tqi_readyTime, AR_Q_RDYTIMECFG_INT) |
303 			AR_Q_RDYTIMECFG_EN);
304 	}
305 	if (qi->tqi_burstTime) {
306 		OS_REG_WRITE(ah, AR_DCHNTIME(q),
307 			SM(qi->tqi_burstTime, AR_D_CHNTIME_DUR) |
308 			AR_D_CHNTIME_EN);
309 		if (qi->tqi_qflags & HAL_TXQ_RDYTIME_EXP_POLICY_ENABLE) {
310 			OS_REG_WRITE(ah, AR_QMISC(q),
311 			     OS_REG_READ(ah, AR_QMISC(q)) |
312 			     AR_Q_MISC_RDYTIME_EXP_POLICY);
313 		}
314 	}
315 
316 	if (qi->tqi_qflags & HAL_TXQ_BACKOFF_DISABLE) {
317 		OS_REG_WRITE(ah, AR_DMISC(q),
318 			OS_REG_READ(ah, AR_DMISC(q)) |
319 			AR_D_MISC_POST_FR_BKOFF_DIS);
320 	}
321 	if (qi->tqi_qflags & HAL_TXQ_FRAG_BURST_BACKOFF_ENABLE) {
322 		OS_REG_WRITE(ah, AR_DMISC(q),
323 			OS_REG_READ(ah, AR_DMISC(q)) |
324 			AR_D_MISC_FRAG_BKOFF_EN);
325 	}
326 	switch (qi->tqi_type) {
327 	case HAL_TX_QUEUE_BEACON:
328 		/* Configure QCU for beacons */
329 		OS_REG_WRITE(ah, AR_QMISC(q),
330 			OS_REG_READ(ah, AR_QMISC(q))
331 			| AR_Q_MISC_FSP_DBA_GATED
332 			| AR_Q_MISC_BEACON_USE
333 			| AR_Q_MISC_CBR_INCR_DIS1);
334 		/* Configure DCU for beacons */
335 		value = (AR_D_MISC_ARB_LOCKOUT_CNTRL_GLOBAL << AR_D_MISC_ARB_LOCKOUT_CNTRL_S)
336 			| AR_D_MISC_BEACON_USE | AR_D_MISC_POST_FR_BKOFF_DIS;
337 		if (AH_PRIVATE(ah)->ah_macVersion < AR_SREV_VERSION_OAHU)
338 			value |= AR5311_D_MISC_SEQ_NUM_CONTROL;
339 		OS_REG_WRITE(ah, AR_DMISC(q), value);
340 		break;
341 	case HAL_TX_QUEUE_CAB:
342 		/* Configure QCU for CAB (Crap After Beacon) frames */
343 		OS_REG_WRITE(ah, AR_QMISC(q),
344 			OS_REG_READ(ah, AR_QMISC(q))
345 			| AR_Q_MISC_FSP_DBA_GATED | AR_Q_MISC_CBR_INCR_DIS1
346 			| AR_Q_MISC_CBR_INCR_DIS0 | AR_Q_MISC_RDYTIME_EXP_POLICY);
347 
348 		value = (ahp->ah_beaconInterval
349 			- (ah->ah_config.ah_sw_beacon_response_time
350 			        - ah->ah_config.ah_dma_beacon_response_time)
351 			- ah->ah_config.ah_additional_swba_backoff) * 1024;
352 		OS_REG_WRITE(ah, AR_QRDYTIMECFG(q), value | AR_Q_RDYTIMECFG_EN);
353 
354 		/* Configure DCU for CAB */
355 		value = (AR_D_MISC_ARB_LOCKOUT_CNTRL_GLOBAL << AR_D_MISC_ARB_LOCKOUT_CNTRL_S);
356 		if (AH_PRIVATE(ah)->ah_macVersion < AR_SREV_VERSION_OAHU)
357 			value |= AR5311_D_MISC_SEQ_NUM_CONTROL;
358 		OS_REG_WRITE(ah, AR_QMISC(q), value);
359 		break;
360 	default:
361 		/* NB: silence compiler */
362 		break;
363 	}
364 
365 	/*
366 	 * Always update the secondary interrupt mask registers - this
367 	 * could be a new queue getting enabled in a running system or
368 	 * hw getting re-initialized during a reset!
369 	 *
370 	 * Since we don't differentiate between tx interrupts corresponding
371 	 * to individual queues - secondary tx mask regs are always unmasked;
372 	 * tx interrupts are enabled/disabled for all queues collectively
373 	 * using the primary mask reg
374 	 */
375 	if (qi->tqi_qflags & HAL_TXQ_TXOKINT_ENABLE)
376 		ahp->ah_txOkInterruptMask |= 1 << q;
377 	else
378 		ahp->ah_txOkInterruptMask &= ~(1 << q);
379 	if (qi->tqi_qflags & HAL_TXQ_TXERRINT_ENABLE)
380 		ahp->ah_txErrInterruptMask |= 1 << q;
381 	else
382 		ahp->ah_txErrInterruptMask &= ~(1 << q);
383 	if (qi->tqi_qflags & HAL_TXQ_TXDESCINT_ENABLE)
384 		ahp->ah_txDescInterruptMask |= 1 << q;
385 	else
386 		ahp->ah_txDescInterruptMask &= ~(1 << q);
387 	if (qi->tqi_qflags & HAL_TXQ_TXEOLINT_ENABLE)
388 		ahp->ah_txEolInterruptMask |= 1 << q;
389 	else
390 		ahp->ah_txEolInterruptMask &= ~(1 << q);
391 	if (qi->tqi_qflags & HAL_TXQ_TXURNINT_ENABLE)
392 		ahp->ah_txUrnInterruptMask |= 1 << q;
393 	else
394 		ahp->ah_txUrnInterruptMask &= ~(1 << q);
395 	setTxQInterrupts(ah, qi);
396 
397 	return AH_TRUE;
398 }
399 
400 /*
401  * Get the TXDP for the specified data queue.
402  */
403 uint32_t
404 ar5211GetTxDP(struct ath_hal *ah, u_int q)
405 {
406 	HALASSERT(q < HAL_NUM_TX_QUEUES);
407 	return OS_REG_READ(ah, AR_QTXDP(q));
408 }
409 
410 /*
411  * Set the TxDP for the specified tx queue.
412  */
413 HAL_BOOL
414 ar5211SetTxDP(struct ath_hal *ah, u_int q, uint32_t txdp)
415 {
416 	HALASSERT(q < HAL_NUM_TX_QUEUES);
417 	HALASSERT(AH5211(ah)->ah_txq[q].tqi_type != HAL_TX_QUEUE_INACTIVE);
418 
419 	/*
420 	 * Make sure that TXE is deasserted before setting the TXDP.  If TXE
421 	 * is still asserted, setting TXDP will have no effect.
422 	 */
423 	HALASSERT((OS_REG_READ(ah, AR_Q_TXE) & (1 << q)) == 0);
424 
425 	OS_REG_WRITE(ah, AR_QTXDP(q), txdp);
426 
427 	return AH_TRUE;
428 }
429 
430 /*
431  * Set Transmit Enable bits for the specified queues.
432  */
433 HAL_BOOL
434 ar5211StartTxDma(struct ath_hal *ah, u_int q)
435 {
436 	HALASSERT(q < HAL_NUM_TX_QUEUES);
437 	HALASSERT(AH5211(ah)->ah_txq[q].tqi_type != HAL_TX_QUEUE_INACTIVE);
438 
439 	/* Check that queue is not already active */
440 	HALASSERT((OS_REG_READ(ah, AR_Q_TXD) & (1<<q)) == 0);
441 
442 	HALDEBUG(ah, HAL_DEBUG_TXQUEUE, "%s: queue %u\n", __func__, q);
443 
444 	/* Check to be sure we're not enabling a q that has its TXD bit set. */
445 	HALASSERT((OS_REG_READ(ah, AR_Q_TXD) & (1 << q)) == 0);
446 
447 	OS_REG_WRITE(ah, AR_Q_TXE, 1 << q);
448 	return AH_TRUE;
449 }
450 
451 /*
452  * Return the number of frames pending on the specified queue.
453  */
454 uint32_t
455 ar5211NumTxPending(struct ath_hal *ah, u_int q)
456 {
457 	uint32_t n;
458 
459 	HALASSERT(q < HAL_NUM_TX_QUEUES);
460 	HALASSERT(AH5211(ah)->ah_txq[q].tqi_type != HAL_TX_QUEUE_INACTIVE);
461 
462 	n = OS_REG_READ(ah, AR_QSTS(q)) & AR_Q_STS_PEND_FR_CNT_M;
463 	/*
464 	 * Pending frame count (PFC) can momentarily go to zero
465 	 * while TXE remains asserted.  In other words a PFC of
466 	 * zero is not sufficient to say that the queue has stopped.
467 	 */
468 	if (n == 0 && (OS_REG_READ(ah, AR_Q_TXE) & (1<<q)))
469 		n = 1;			/* arbitrarily pick 1 */
470 	return n;
471 }
472 
473 /*
474  * Stop transmit on the specified queue
475  */
476 HAL_BOOL
477 ar5211StopTxDma(struct ath_hal *ah, u_int q)
478 {
479 	int i;
480 
481 	HALASSERT(q < HAL_NUM_TX_QUEUES);
482 	HALASSERT(AH5211(ah)->ah_txq[q].tqi_type != HAL_TX_QUEUE_INACTIVE);
483 
484 	OS_REG_WRITE(ah, AR_Q_TXD, 1<<q);
485 	for (i = 0; i < 10000; i++) {
486 		if (ar5211NumTxPending(ah, q) == 0)
487 			break;
488 		OS_DELAY(10);
489 	}
490 	OS_REG_WRITE(ah, AR_Q_TXD, 0);
491 
492 	return (i < 10000);
493 }
494 
495 /*
496  * Descriptor Access Functions
497  */
498 
499 #define	VALID_PKT_TYPES \
500 	((1<<HAL_PKT_TYPE_NORMAL)|(1<<HAL_PKT_TYPE_ATIM)|\
501 	 (1<<HAL_PKT_TYPE_PSPOLL)|(1<<HAL_PKT_TYPE_PROBE_RESP)|\
502 	 (1<<HAL_PKT_TYPE_BEACON))
503 #define	isValidPktType(_t)	((1<<(_t)) & VALID_PKT_TYPES)
504 #define	VALID_TX_RATES \
505 	((1<<0x0b)|(1<<0x0f)|(1<<0x0a)|(1<<0x0e)|(1<<0x09)|(1<<0x0d)|\
506 	 (1<<0x08)|(1<<0x0c)|(1<<0x1b)|(1<<0x1a)|(1<<0x1e)|(1<<0x19)|\
507 	 (1<<0x1d)|(1<<0x18)|(1<<0x1c))
508 #define	isValidTxRate(_r)	((1<<(_r)) & VALID_TX_RATES)
509 
510 HAL_BOOL
511 ar5211SetupTxDesc(struct ath_hal *ah, struct ath_desc *ds,
512 	u_int pktLen,
513 	u_int hdrLen,
514 	HAL_PKT_TYPE type,
515 	u_int txPower,
516 	u_int txRate0, u_int txTries0,
517 	u_int keyIx,
518 	u_int antMode,
519 	u_int flags,
520 	u_int rtsctsRate,
521 	u_int rtsctsDuration,
522 	u_int compicvLen,
523 	u_int compivLen,
524 	u_int comp)
525 {
526 	struct ar5211_desc *ads = AR5211DESC(ds);
527 
528 	(void) hdrLen;
529 	(void) txPower;
530 	(void) rtsctsRate; (void) rtsctsDuration;
531 
532 	HALASSERT(txTries0 != 0);
533 	HALASSERT(isValidPktType(type));
534 	HALASSERT(isValidTxRate(txRate0));
535 	/* XXX validate antMode */
536 
537 	ads->ds_ctl0 = (pktLen & AR_FrameLen)
538 		     | (txRate0 << AR_XmitRate_S)
539 		     | (antMode << AR_AntModeXmit_S)
540 		     | (flags & HAL_TXDESC_CLRDMASK ? AR_ClearDestMask : 0)
541 		     | (flags & HAL_TXDESC_INTREQ ? AR_TxInterReq : 0)
542 		     | (flags & HAL_TXDESC_RTSENA ? AR_RTSCTSEnable : 0)
543 		     | (flags & HAL_TXDESC_VEOL ? AR_VEOL : 0)
544 		     ;
545 	ads->ds_ctl1 = (type << 26)
546 		     | (flags & HAL_TXDESC_NOACK ? AR_NoAck : 0)
547 		     ;
548 
549 	if (keyIx != HAL_TXKEYIX_INVALID) {
550 		ads->ds_ctl1 |=
551 			(keyIx << AR_EncryptKeyIdx_S) & AR_EncryptKeyIdx;
552 		ads->ds_ctl0 |= AR_EncryptKeyValid;
553 	}
554 	return AH_TRUE;
555 #undef RATE
556 }
557 
558 HAL_BOOL
559 ar5211SetupXTxDesc(struct ath_hal *ah, struct ath_desc *ds,
560 	u_int txRate1, u_int txTries1,
561 	u_int txRate2, u_int txTries2,
562 	u_int txRate3, u_int txTries3)
563 {
564 	(void) ah; (void) ds;
565 	(void) txRate1; (void) txTries1;
566 	(void) txRate2; (void) txTries2;
567 	(void) txRate3; (void) txTries3;
568 	return AH_FALSE;
569 }
570 
571 void
572 ar5211IntrReqTxDesc(struct ath_hal *ah, struct ath_desc *ds)
573 {
574 	struct ar5211_desc *ads = AR5211DESC(ds);
575 
576 	ads->ds_ctl0 |= AR_TxInterReq;
577 }
578 
579 HAL_BOOL
580 ar5211FillTxDesc(struct ath_hal *ah, struct ath_desc *ds,
581 	HAL_DMA_ADDR *bufAddrList, uint32_t *segLenList, u_int qcuId,
582 	u_int descId, HAL_BOOL firstSeg, HAL_BOOL lastSeg,
583 	const struct ath_desc *ds0)
584 {
585 	struct ar5211_desc *ads = AR5211DESC(ds);
586 	uint32_t segLen = segLenList[0];
587 
588 	ds->ds_data = bufAddrList[0];
589 
590 	HALASSERT((segLen &~ AR_BufLen) == 0);
591 
592 	if (firstSeg) {
593 		/*
594 		 * First descriptor, don't clobber xmit control data
595 		 * setup by ar5211SetupTxDesc.
596 		 */
597 		ads->ds_ctl1 |= segLen | (lastSeg ? 0 : AR_More);
598 	} else if (lastSeg) {		/* !firstSeg && lastSeg */
599 		/*
600 		 * Last descriptor in a multi-descriptor frame,
601 		 * copy the transmit parameters from the first
602 		 * frame for processing on completion.
603 		 */
604 		ads->ds_ctl0 = AR5211DESC_CONST(ds0)->ds_ctl0;
605 		ads->ds_ctl1 = segLen;
606 	} else {			/* !firstSeg && !lastSeg */
607 		/*
608 		 * Intermediate descriptor in a multi-descriptor frame.
609 		 */
610 		ads->ds_ctl0 = 0;
611 		ads->ds_ctl1 = segLen | AR_More;
612 	}
613 	ads->ds_status0 = ads->ds_status1 = 0;
614 	return AH_TRUE;
615 }
616 
617 /*
618  * Processing of HW TX descriptor.
619  */
620 HAL_STATUS
621 ar5211ProcTxDesc(struct ath_hal *ah,
622 	struct ath_desc *ds, struct ath_tx_status *ts)
623 {
624 	struct ar5211_desc *ads = AR5211DESC(ds);
625 
626 	if ((ads->ds_status1 & AR_Done) == 0)
627 		return HAL_EINPROGRESS;
628 
629 	/* Update software copies of the HW status */
630 	ts->ts_seqnum = MS(ads->ds_status1, AR_SeqNum);
631 	ts->ts_tstamp = MS(ads->ds_status0, AR_SendTimestamp);
632 	ts->ts_status = 0;
633 	if ((ads->ds_status0 & AR_FrmXmitOK) == 0) {
634 		if (ads->ds_status0 & AR_ExcessiveRetries)
635 			ts->ts_status |= HAL_TXERR_XRETRY;
636 		if (ads->ds_status0 & AR_Filtered)
637 			ts->ts_status |= HAL_TXERR_FILT;
638 		if (ads->ds_status0 & AR_FIFOUnderrun)
639 			ts->ts_status |= HAL_TXERR_FIFO;
640 	}
641 	ts->ts_rate = MS(ads->ds_ctl0, AR_XmitRate);
642 	ts->ts_rssi = MS(ads->ds_status1, AR_AckSigStrength);
643 	ts->ts_shortretry = MS(ads->ds_status0, AR_ShortRetryCnt);
644 	ts->ts_longretry = MS(ads->ds_status0, AR_LongRetryCnt);
645 	ts->ts_virtcol = MS(ads->ds_status0, AR_VirtCollCnt);
646 	ts->ts_antenna = 0;		/* NB: don't know */
647 	ts->ts_finaltsi = 0;
648 	/*
649 	 * NB: the number of retries is one less than it should be.
650 	 * Also, 0 retries and 1 retry are both reported as 0 retries.
651 	 */
652 	if (ts->ts_shortretry > 0)
653 		ts->ts_shortretry++;
654 	if (ts->ts_longretry > 0)
655 		ts->ts_longretry++;
656 
657 	return HAL_OK;
658 }
659 
660 /*
661  * Determine which tx queues need interrupt servicing.
662  * STUB.
663  */
664 void
665 ar5211GetTxIntrQueue(struct ath_hal *ah, uint32_t *txqs)
666 {
667 	return;
668 }
669 
670 /*
671  * Retrieve the rate table from the given TX completion descriptor
672  */
673 HAL_BOOL
674 ar5211GetTxCompletionRates(struct ath_hal *ah, const struct ath_desc *ds0, int *rates, int *tries)
675 {
676 	return AH_FALSE;
677 }
678 
679 void
680 ar5211SetTxDescLink(struct ath_hal *ah, void *ds, uint32_t link)
681 {
682 	struct ar5211_desc *ads = AR5211DESC(ds);
683 
684 	ads->ds_link = link;
685 }
686 
687 void
688 ar5211GetTxDescLink(struct ath_hal *ah, void *ds, uint32_t *link)
689 {
690 	struct ar5211_desc *ads = AR5211DESC(ds);
691 
692 	*link = ads->ds_link;
693 }
694 
695 void
696 ar5211GetTxDescLinkPtr(struct ath_hal *ah, void *ds, uint32_t **linkptr)
697 {
698 	struct ar5211_desc *ads = AR5211DESC(ds);
699 
700 	*linkptr = &ads->ds_link;
701 }
702