xref: /freebsd/sys/dev/ath/ath_hal/ar5211/ar5211_xmit.c (revision 39ee7a7a6bdd1557b1c3532abf60d139798ac88b)
1 /*
2  * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
3  * Copyright (c) 2002-2006 Atheros Communications, Inc.
4  *
5  * Permission to use, copy, modify, and/or distribute this software for any
6  * purpose with or without fee is hereby granted, provided that the above
7  * copyright notice and this permission notice appear in all copies.
8  *
9  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16  *
17  * $FreeBSD$
18  */
19 #include "opt_ah.h"
20 
21 #include "ah.h"
22 #include "ah_internal.h"
23 #include "ah_desc.h"
24 
25 #include "ar5211/ar5211.h"
26 #include "ar5211/ar5211reg.h"
27 #include "ar5211/ar5211desc.h"
28 
29 /*
30  * Update Tx FIFO trigger level.
31  *
32  * Set bIncTrigLevel to TRUE to increase the trigger level.
33  * Set bIncTrigLevel to FALSE to decrease the trigger level.
34  *
35  * Returns TRUE if the trigger level was updated
36  */
37 HAL_BOOL
38 ar5211UpdateTxTrigLevel(struct ath_hal *ah, HAL_BOOL bIncTrigLevel)
39 {
40 	uint32_t curTrigLevel, txcfg;
41 	HAL_INT ints = ar5211GetInterrupts(ah);
42 
43 	/*
44 	 * Disable chip interrupts. This is because halUpdateTxTrigLevel
45 	 * is called from both ISR and non-ISR contexts.
46 	 */
47 	ar5211SetInterrupts(ah, ints &~ HAL_INT_GLOBAL);
48 	txcfg = OS_REG_READ(ah, AR_TXCFG);
49 	curTrigLevel = (txcfg & AR_TXCFG_FTRIG_M) >> AR_TXCFG_FTRIG_S;
50 	if (bIncTrigLevel){
51 		/* increase the trigger level */
52 		curTrigLevel = curTrigLevel +
53 			((MAX_TX_FIFO_THRESHOLD - curTrigLevel) / 2);
54 	} else {
55 		/* decrease the trigger level if not already at the minimum */
56 		if (curTrigLevel > MIN_TX_FIFO_THRESHOLD) {
57 			/* decrease the trigger level */
58 			curTrigLevel--;
59 		} else {
60 			/* no update to the trigger level */
61 			/* re-enable chip interrupts */
62 			ar5211SetInterrupts(ah, ints);
63 			return AH_FALSE;
64 		}
65 	}
66 	/* Update the trigger level */
67 	OS_REG_WRITE(ah, AR_TXCFG, (txcfg &~ AR_TXCFG_FTRIG_M) |
68 		((curTrigLevel << AR_TXCFG_FTRIG_S) & AR_TXCFG_FTRIG_M));
69 	/* re-enable chip interrupts */
70 	ar5211SetInterrupts(ah, ints);
71 	return AH_TRUE;
72 }
73 
74 /*
75  * Set the properties of the tx queue with the parameters
76  * from qInfo.  The queue must previously have been setup
77  * with a call to ar5211SetupTxQueue.
78  */
79 HAL_BOOL
80 ar5211SetTxQueueProps(struct ath_hal *ah, int q, const HAL_TXQ_INFO *qInfo)
81 {
82 	struct ath_hal_5211 *ahp = AH5211(ah);
83 
84 	if (q >= HAL_NUM_TX_QUEUES) {
85 		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: invalid queue num %u\n",
86 		    __func__, q);
87 		return AH_FALSE;
88 	}
89 	return ath_hal_setTxQProps(ah, &ahp->ah_txq[q], qInfo);
90 }
91 
92 /*
93  * Return the properties for the specified tx queue.
94  */
95 HAL_BOOL
96 ar5211GetTxQueueProps(struct ath_hal *ah, int q, HAL_TXQ_INFO *qInfo)
97 {
98 	struct ath_hal_5211 *ahp = AH5211(ah);
99 
100 	if (q >= HAL_NUM_TX_QUEUES) {
101 		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: invalid queue num %u\n",
102 		    __func__, q);
103 		return AH_FALSE;
104 	}
105 	return ath_hal_getTxQProps(ah, qInfo, &ahp->ah_txq[q]);
106 }
107 
108 /*
109  * Allocate and initialize a tx DCU/QCU combination.
110  */
111 int
112 ar5211SetupTxQueue(struct ath_hal *ah, HAL_TX_QUEUE type,
113 	const HAL_TXQ_INFO *qInfo)
114 {
115 	struct ath_hal_5211 *ahp = AH5211(ah);
116 	HAL_TX_QUEUE_INFO *qi;
117 	int q;
118 
119 	switch (type) {
120 	case HAL_TX_QUEUE_BEACON:
121 		q = 9;
122 		break;
123 	case HAL_TX_QUEUE_CAB:
124 		q = 8;
125 		break;
126 	case HAL_TX_QUEUE_DATA:
127 		q = 0;
128 		if (ahp->ah_txq[q].tqi_type != HAL_TX_QUEUE_INACTIVE)
129 			return q;
130 		break;
131 	default:
132 		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: bad tx queue type %u\n",
133 		    __func__, type);
134 		return -1;
135 	}
136 
137 	HALDEBUG(ah, HAL_DEBUG_TXQUEUE, "%s: queue %u\n", __func__, q);
138 
139 	qi = &ahp->ah_txq[q];
140 	if (qi->tqi_type != HAL_TX_QUEUE_INACTIVE) {
141 		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: tx queue %u already active\n",
142 		    __func__, q);
143 		return -1;
144 	}
145 	OS_MEMZERO(qi, sizeof(HAL_TX_QUEUE_INFO));
146 	qi->tqi_type = type;
147 	if (qInfo == AH_NULL) {
148 		/* by default enable OK+ERR+DESC+URN interrupts */
149 		qi->tqi_qflags =
150 			  HAL_TXQ_TXOKINT_ENABLE
151 			| HAL_TXQ_TXERRINT_ENABLE
152 			| HAL_TXQ_TXDESCINT_ENABLE
153 			| HAL_TXQ_TXURNINT_ENABLE
154 			;
155 		qi->tqi_aifs = INIT_AIFS;
156 		qi->tqi_cwmin = HAL_TXQ_USEDEFAULT;	/* NB: do at reset */
157 		qi->tqi_cwmax = INIT_CWMAX;
158 		qi->tqi_shretry = INIT_SH_RETRY;
159 		qi->tqi_lgretry = INIT_LG_RETRY;
160 	} else
161 		(void) ar5211SetTxQueueProps(ah, q, qInfo);
162 	return q;
163 }
164 
165 /*
166  * Update the h/w interrupt registers to reflect a tx q's configuration.
167  */
168 static void
169 setTxQInterrupts(struct ath_hal *ah, HAL_TX_QUEUE_INFO *qi)
170 {
171 	struct ath_hal_5211 *ahp = AH5211(ah);
172 
173 	HALDEBUG(ah, HAL_DEBUG_TXQUEUE,
174 	    "%s: tx ok 0x%x err 0x%x desc 0x%x eol 0x%x urn 0x%x\n", __func__
175 		, ahp->ah_txOkInterruptMask
176 		, ahp->ah_txErrInterruptMask
177 		, ahp->ah_txDescInterruptMask
178 		, ahp->ah_txEolInterruptMask
179 		, ahp->ah_txUrnInterruptMask
180 	);
181 
182 	OS_REG_WRITE(ah, AR_IMR_S0,
183 		  SM(ahp->ah_txOkInterruptMask, AR_IMR_S0_QCU_TXOK)
184 		| SM(ahp->ah_txDescInterruptMask, AR_IMR_S0_QCU_TXDESC)
185 	);
186 	OS_REG_WRITE(ah, AR_IMR_S1,
187 		  SM(ahp->ah_txErrInterruptMask, AR_IMR_S1_QCU_TXERR)
188 		| SM(ahp->ah_txEolInterruptMask, AR_IMR_S1_QCU_TXEOL)
189 	);
190 	OS_REG_RMW_FIELD(ah, AR_IMR_S2,
191 		AR_IMR_S2_QCU_TXURN, ahp->ah_txUrnInterruptMask);
192 }
193 
194 
195 /*
196  * Free a tx DCU/QCU combination.
197  */
198 HAL_BOOL
199 ar5211ReleaseTxQueue(struct ath_hal *ah, u_int q)
200 {
201 	struct ath_hal_5211 *ahp = AH5211(ah);
202 	HAL_TX_QUEUE_INFO *qi;
203 
204 	if (q >= HAL_NUM_TX_QUEUES) {
205 		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: invalid queue num %u\n",
206 		    __func__, q);
207 		return AH_FALSE;
208 	}
209 	qi = &ahp->ah_txq[q];
210 	if (qi->tqi_type == HAL_TX_QUEUE_INACTIVE) {
211 		HALDEBUG(ah, HAL_DEBUG_TXQUEUE, "%s: inactive queue %u\n",
212 		    __func__, q);
213 		return AH_FALSE;
214 	}
215 
216 	HALDEBUG(ah, HAL_DEBUG_TXQUEUE, "%s: release queue %u\n", __func__, q);
217 
218 	qi->tqi_type = HAL_TX_QUEUE_INACTIVE;
219 	ahp->ah_txOkInterruptMask &= ~(1 << q);
220 	ahp->ah_txErrInterruptMask &= ~(1 << q);
221 	ahp->ah_txDescInterruptMask &= ~(1 << q);
222 	ahp->ah_txEolInterruptMask &= ~(1 << q);
223 	ahp->ah_txUrnInterruptMask &= ~(1 << q);
224 	setTxQInterrupts(ah, qi);
225 
226 	return AH_TRUE;
227 }
228 
229 /*
230  * Set the retry, aifs, cwmin/max, readyTime regs for specified queue
231  */
232 HAL_BOOL
233 ar5211ResetTxQueue(struct ath_hal *ah, u_int q)
234 {
235 	struct ath_hal_5211 *ahp = AH5211(ah);
236 	const struct ieee80211_channel *chan = AH_PRIVATE(ah)->ah_curchan;
237 	HAL_TX_QUEUE_INFO *qi;
238 	uint32_t cwMin, chanCwMin, value;
239 
240 	if (q >= HAL_NUM_TX_QUEUES) {
241 		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: invalid queue num %u\n",
242 		    __func__, q);
243 		return AH_FALSE;
244 	}
245 	qi = &ahp->ah_txq[q];
246 	if (qi->tqi_type == HAL_TX_QUEUE_INACTIVE) {
247 		HALDEBUG(ah, HAL_DEBUG_TXQUEUE, "%s: inactive queue %u\n",
248 		    __func__, q);
249 		return AH_TRUE;		/* XXX??? */
250 	}
251 
252 	if (qi->tqi_cwmin == HAL_TXQ_USEDEFAULT) {
253 		/*
254 		 * Select cwmin according to channel type.
255 		 * NB: chan can be NULL during attach
256 		 */
257 		if (chan && IEEE80211_IS_CHAN_B(chan))
258 			chanCwMin = INIT_CWMIN_11B;
259 		else
260 			chanCwMin = INIT_CWMIN;
261 		/* make sure that the CWmin is of the form (2^n - 1) */
262 		for (cwMin = 1; cwMin < chanCwMin; cwMin = (cwMin << 1) | 1)
263 			;
264 	} else
265 		cwMin = qi->tqi_cwmin;
266 
267 	/* set cwMin/Max and AIFS values */
268 	OS_REG_WRITE(ah, AR_DLCL_IFS(q),
269 		  SM(cwMin, AR_D_LCL_IFS_CWMIN)
270 		| SM(qi->tqi_cwmax, AR_D_LCL_IFS_CWMAX)
271 		| SM(qi->tqi_aifs, AR_D_LCL_IFS_AIFS));
272 
273 	/* Set retry limit values */
274 	OS_REG_WRITE(ah, AR_DRETRY_LIMIT(q),
275 		   SM(INIT_SSH_RETRY, AR_D_RETRY_LIMIT_STA_SH)
276 		 | SM(INIT_SLG_RETRY, AR_D_RETRY_LIMIT_STA_LG)
277 		 | SM(qi->tqi_lgretry, AR_D_RETRY_LIMIT_FR_LG)
278 		 | SM(qi->tqi_shretry, AR_D_RETRY_LIMIT_FR_SH)
279 	);
280 
281 	/* enable early termination on the QCU */
282 	OS_REG_WRITE(ah, AR_QMISC(q), AR_Q_MISC_DCU_EARLY_TERM_REQ);
283 
284 	if (AH_PRIVATE(ah)->ah_macVersion < AR_SREV_VERSION_OAHU) {
285 		/* Configure DCU to use the global sequence count */
286 		OS_REG_WRITE(ah, AR_DMISC(q), AR5311_D_MISC_SEQ_NUM_CONTROL);
287 	}
288 	/* multiqueue support */
289 	if (qi->tqi_cbrPeriod) {
290 		OS_REG_WRITE(ah, AR_QCBRCFG(q),
291 			  SM(qi->tqi_cbrPeriod,AR_Q_CBRCFG_CBR_INTERVAL)
292 			| SM(qi->tqi_cbrOverflowLimit, AR_Q_CBRCFG_CBR_OVF_THRESH));
293 		OS_REG_WRITE(ah, AR_QMISC(q),
294 			OS_REG_READ(ah, AR_QMISC(q)) |
295 			AR_Q_MISC_FSP_CBR |
296 			(qi->tqi_cbrOverflowLimit ?
297 				AR_Q_MISC_CBR_EXP_CNTR_LIMIT : 0));
298 	}
299 	if (qi->tqi_readyTime) {
300 		OS_REG_WRITE(ah, AR_QRDYTIMECFG(q),
301 			SM(qi->tqi_readyTime, AR_Q_RDYTIMECFG_INT) |
302 			AR_Q_RDYTIMECFG_EN);
303 	}
304 	if (qi->tqi_burstTime) {
305 		OS_REG_WRITE(ah, AR_DCHNTIME(q),
306 			SM(qi->tqi_burstTime, AR_D_CHNTIME_DUR) |
307 			AR_D_CHNTIME_EN);
308 		if (qi->tqi_qflags & HAL_TXQ_RDYTIME_EXP_POLICY_ENABLE) {
309 			OS_REG_WRITE(ah, AR_QMISC(q),
310 			     OS_REG_READ(ah, AR_QMISC(q)) |
311 			     AR_Q_MISC_RDYTIME_EXP_POLICY);
312 		}
313 	}
314 
315 	if (qi->tqi_qflags & HAL_TXQ_BACKOFF_DISABLE) {
316 		OS_REG_WRITE(ah, AR_DMISC(q),
317 			OS_REG_READ(ah, AR_DMISC(q)) |
318 			AR_D_MISC_POST_FR_BKOFF_DIS);
319 	}
320 	if (qi->tqi_qflags & HAL_TXQ_FRAG_BURST_BACKOFF_ENABLE) {
321 		OS_REG_WRITE(ah, AR_DMISC(q),
322 			OS_REG_READ(ah, AR_DMISC(q)) |
323 			AR_D_MISC_FRAG_BKOFF_EN);
324 	}
325 	switch (qi->tqi_type) {
326 	case HAL_TX_QUEUE_BEACON:
327 		/* Configure QCU for beacons */
328 		OS_REG_WRITE(ah, AR_QMISC(q),
329 			OS_REG_READ(ah, AR_QMISC(q))
330 			| AR_Q_MISC_FSP_DBA_GATED
331 			| AR_Q_MISC_BEACON_USE
332 			| AR_Q_MISC_CBR_INCR_DIS1);
333 		/* Configure DCU for beacons */
334 		value = (AR_D_MISC_ARB_LOCKOUT_CNTRL_GLOBAL << AR_D_MISC_ARB_LOCKOUT_CNTRL_S)
335 			| AR_D_MISC_BEACON_USE | AR_D_MISC_POST_FR_BKOFF_DIS;
336 		if (AH_PRIVATE(ah)->ah_macVersion < AR_SREV_VERSION_OAHU)
337 			value |= AR5311_D_MISC_SEQ_NUM_CONTROL;
338 		OS_REG_WRITE(ah, AR_DMISC(q), value);
339 		break;
340 	case HAL_TX_QUEUE_CAB:
341 		/* Configure QCU for CAB (Crap After Beacon) frames */
342 		OS_REG_WRITE(ah, AR_QMISC(q),
343 			OS_REG_READ(ah, AR_QMISC(q))
344 			| AR_Q_MISC_FSP_DBA_GATED | AR_Q_MISC_CBR_INCR_DIS1
345 			| AR_Q_MISC_CBR_INCR_DIS0 | AR_Q_MISC_RDYTIME_EXP_POLICY);
346 
347 		value = (ahp->ah_beaconInterval
348 			- (ah->ah_config.ah_sw_beacon_response_time
349 			        - ah->ah_config.ah_dma_beacon_response_time)
350 			- ah->ah_config.ah_additional_swba_backoff) * 1024;
351 		OS_REG_WRITE(ah, AR_QRDYTIMECFG(q), value | AR_Q_RDYTIMECFG_EN);
352 
353 		/* Configure DCU for CAB */
354 		value = (AR_D_MISC_ARB_LOCKOUT_CNTRL_GLOBAL << AR_D_MISC_ARB_LOCKOUT_CNTRL_S);
355 		if (AH_PRIVATE(ah)->ah_macVersion < AR_SREV_VERSION_OAHU)
356 			value |= AR5311_D_MISC_SEQ_NUM_CONTROL;
357 		OS_REG_WRITE(ah, AR_QMISC(q), value);
358 		break;
359 	default:
360 		/* NB: silence compiler */
361 		break;
362 	}
363 
364 	/*
365 	 * Always update the secondary interrupt mask registers - this
366 	 * could be a new queue getting enabled in a running system or
367 	 * hw getting re-initialized during a reset!
368 	 *
369 	 * Since we don't differentiate between tx interrupts corresponding
370 	 * to individual queues - secondary tx mask regs are always unmasked;
371 	 * tx interrupts are enabled/disabled for all queues collectively
372 	 * using the primary mask reg
373 	 */
374 	if (qi->tqi_qflags & HAL_TXQ_TXOKINT_ENABLE)
375 		ahp->ah_txOkInterruptMask |= 1 << q;
376 	else
377 		ahp->ah_txOkInterruptMask &= ~(1 << q);
378 	if (qi->tqi_qflags & HAL_TXQ_TXERRINT_ENABLE)
379 		ahp->ah_txErrInterruptMask |= 1 << q;
380 	else
381 		ahp->ah_txErrInterruptMask &= ~(1 << q);
382 	if (qi->tqi_qflags & HAL_TXQ_TXDESCINT_ENABLE)
383 		ahp->ah_txDescInterruptMask |= 1 << q;
384 	else
385 		ahp->ah_txDescInterruptMask &= ~(1 << q);
386 	if (qi->tqi_qflags & HAL_TXQ_TXEOLINT_ENABLE)
387 		ahp->ah_txEolInterruptMask |= 1 << q;
388 	else
389 		ahp->ah_txEolInterruptMask &= ~(1 << q);
390 	if (qi->tqi_qflags & HAL_TXQ_TXURNINT_ENABLE)
391 		ahp->ah_txUrnInterruptMask |= 1 << q;
392 	else
393 		ahp->ah_txUrnInterruptMask &= ~(1 << q);
394 	setTxQInterrupts(ah, qi);
395 
396 	return AH_TRUE;
397 }
398 
399 /*
400  * Get the TXDP for the specified data queue.
401  */
402 uint32_t
403 ar5211GetTxDP(struct ath_hal *ah, u_int q)
404 {
405 	HALASSERT(q < HAL_NUM_TX_QUEUES);
406 	return OS_REG_READ(ah, AR_QTXDP(q));
407 }
408 
409 /*
410  * Set the TxDP for the specified tx queue.
411  */
412 HAL_BOOL
413 ar5211SetTxDP(struct ath_hal *ah, u_int q, uint32_t txdp)
414 {
415 	HALASSERT(q < HAL_NUM_TX_QUEUES);
416 	HALASSERT(AH5211(ah)->ah_txq[q].tqi_type != HAL_TX_QUEUE_INACTIVE);
417 
418 	/*
419 	 * Make sure that TXE is deasserted before setting the TXDP.  If TXE
420 	 * is still asserted, setting TXDP will have no effect.
421 	 */
422 	HALASSERT((OS_REG_READ(ah, AR_Q_TXE) & (1 << q)) == 0);
423 
424 	OS_REG_WRITE(ah, AR_QTXDP(q), txdp);
425 
426 	return AH_TRUE;
427 }
428 
429 /*
430  * Set Transmit Enable bits for the specified queues.
431  */
432 HAL_BOOL
433 ar5211StartTxDma(struct ath_hal *ah, u_int q)
434 {
435 	HALASSERT(q < HAL_NUM_TX_QUEUES);
436 	HALASSERT(AH5211(ah)->ah_txq[q].tqi_type != HAL_TX_QUEUE_INACTIVE);
437 
438 	/* Check that queue is not already active */
439 	HALASSERT((OS_REG_READ(ah, AR_Q_TXD) & (1<<q)) == 0);
440 
441 	HALDEBUG(ah, HAL_DEBUG_TXQUEUE, "%s: queue %u\n", __func__, q);
442 
443 	/* Check to be sure we're not enabling a q that has its TXD bit set. */
444 	HALASSERT((OS_REG_READ(ah, AR_Q_TXD) & (1 << q)) == 0);
445 
446 	OS_REG_WRITE(ah, AR_Q_TXE, 1 << q);
447 	return AH_TRUE;
448 }
449 
450 /*
451  * Return the number of frames pending on the specified queue.
452  */
453 uint32_t
454 ar5211NumTxPending(struct ath_hal *ah, u_int q)
455 {
456 	uint32_t n;
457 
458 	HALASSERT(q < HAL_NUM_TX_QUEUES);
459 	HALASSERT(AH5211(ah)->ah_txq[q].tqi_type != HAL_TX_QUEUE_INACTIVE);
460 
461 	n = OS_REG_READ(ah, AR_QSTS(q)) & AR_Q_STS_PEND_FR_CNT_M;
462 	/*
463 	 * Pending frame count (PFC) can momentarily go to zero
464 	 * while TXE remains asserted.  In other words a PFC of
465 	 * zero is not sufficient to say that the queue has stopped.
466 	 */
467 	if (n == 0 && (OS_REG_READ(ah, AR_Q_TXE) & (1<<q)))
468 		n = 1;			/* arbitrarily pick 1 */
469 	return n;
470 }
471 
472 /*
473  * Stop transmit on the specified queue
474  */
475 HAL_BOOL
476 ar5211StopTxDma(struct ath_hal *ah, u_int q)
477 {
478 	int i;
479 
480 	HALASSERT(q < HAL_NUM_TX_QUEUES);
481 	HALASSERT(AH5211(ah)->ah_txq[q].tqi_type != HAL_TX_QUEUE_INACTIVE);
482 
483 	OS_REG_WRITE(ah, AR_Q_TXD, 1<<q);
484 	for (i = 0; i < 10000; i++) {
485 		if (ar5211NumTxPending(ah, q) == 0)
486 			break;
487 		OS_DELAY(10);
488 	}
489 	OS_REG_WRITE(ah, AR_Q_TXD, 0);
490 
491 	return (i < 10000);
492 }
493 
494 /*
495  * Descriptor Access Functions
496  */
497 
498 #define	VALID_PKT_TYPES \
499 	((1<<HAL_PKT_TYPE_NORMAL)|(1<<HAL_PKT_TYPE_ATIM)|\
500 	 (1<<HAL_PKT_TYPE_PSPOLL)|(1<<HAL_PKT_TYPE_PROBE_RESP)|\
501 	 (1<<HAL_PKT_TYPE_BEACON))
502 #define	isValidPktType(_t)	((1<<(_t)) & VALID_PKT_TYPES)
503 #define	VALID_TX_RATES \
504 	((1<<0x0b)|(1<<0x0f)|(1<<0x0a)|(1<<0x0e)|(1<<0x09)|(1<<0x0d)|\
505 	 (1<<0x08)|(1<<0x0c)|(1<<0x1b)|(1<<0x1a)|(1<<0x1e)|(1<<0x19)|\
506 	 (1<<0x1d)|(1<<0x18)|(1<<0x1c))
507 #define	isValidTxRate(_r)	((1<<(_r)) & VALID_TX_RATES)
508 
509 HAL_BOOL
510 ar5211SetupTxDesc(struct ath_hal *ah, struct ath_desc *ds,
511 	u_int pktLen,
512 	u_int hdrLen,
513 	HAL_PKT_TYPE type,
514 	u_int txPower,
515 	u_int txRate0, u_int txTries0,
516 	u_int keyIx,
517 	u_int antMode,
518 	u_int flags,
519 	u_int rtsctsRate,
520 	u_int rtsctsDuration,
521 	u_int compicvLen,
522 	u_int compivLen,
523 	u_int comp)
524 {
525 	struct ar5211_desc *ads = AR5211DESC(ds);
526 
527 	(void) hdrLen;
528 	(void) txPower;
529 	(void) rtsctsRate; (void) rtsctsDuration;
530 
531 	HALASSERT(txTries0 != 0);
532 	HALASSERT(isValidPktType(type));
533 	HALASSERT(isValidTxRate(txRate0));
534 	/* XXX validate antMode */
535 
536 	ads->ds_ctl0 = (pktLen & AR_FrameLen)
537 		     | (txRate0 << AR_XmitRate_S)
538 		     | (antMode << AR_AntModeXmit_S)
539 		     | (flags & HAL_TXDESC_CLRDMASK ? AR_ClearDestMask : 0)
540 		     | (flags & HAL_TXDESC_INTREQ ? AR_TxInterReq : 0)
541 		     | (flags & HAL_TXDESC_RTSENA ? AR_RTSCTSEnable : 0)
542 		     | (flags & HAL_TXDESC_VEOL ? AR_VEOL : 0)
543 		     ;
544 	ads->ds_ctl1 = (type << 26)
545 		     | (flags & HAL_TXDESC_NOACK ? AR_NoAck : 0)
546 		     ;
547 
548 	if (keyIx != HAL_TXKEYIX_INVALID) {
549 		ads->ds_ctl1 |=
550 			(keyIx << AR_EncryptKeyIdx_S) & AR_EncryptKeyIdx;
551 		ads->ds_ctl0 |= AR_EncryptKeyValid;
552 	}
553 	return AH_TRUE;
554 #undef RATE
555 }
556 
557 HAL_BOOL
558 ar5211SetupXTxDesc(struct ath_hal *ah, struct ath_desc *ds,
559 	u_int txRate1, u_int txTries1,
560 	u_int txRate2, u_int txTries2,
561 	u_int txRate3, u_int txTries3)
562 {
563 	(void) ah; (void) ds;
564 	(void) txRate1; (void) txTries1;
565 	(void) txRate2; (void) txTries2;
566 	(void) txRate3; (void) txTries3;
567 	return AH_FALSE;
568 }
569 
570 void
571 ar5211IntrReqTxDesc(struct ath_hal *ah, struct ath_desc *ds)
572 {
573 	struct ar5211_desc *ads = AR5211DESC(ds);
574 
575 	ads->ds_ctl0 |= AR_TxInterReq;
576 }
577 
578 HAL_BOOL
579 ar5211FillTxDesc(struct ath_hal *ah, struct ath_desc *ds,
580 	HAL_DMA_ADDR *bufAddrList, uint32_t *segLenList, u_int qcuId,
581 	u_int descId, HAL_BOOL firstSeg, HAL_BOOL lastSeg,
582 	const struct ath_desc *ds0)
583 {
584 	struct ar5211_desc *ads = AR5211DESC(ds);
585 	uint32_t segLen = segLenList[0];
586 
587 	ds->ds_data = bufAddrList[0];
588 
589 	HALASSERT((segLen &~ AR_BufLen) == 0);
590 
591 	if (firstSeg) {
592 		/*
593 		 * First descriptor, don't clobber xmit control data
594 		 * setup by ar5211SetupTxDesc.
595 		 */
596 		ads->ds_ctl1 |= segLen | (lastSeg ? 0 : AR_More);
597 	} else if (lastSeg) {		/* !firstSeg && lastSeg */
598 		/*
599 		 * Last descriptor in a multi-descriptor frame,
600 		 * copy the transmit parameters from the first
601 		 * frame for processing on completion.
602 		 */
603 		ads->ds_ctl0 = AR5211DESC_CONST(ds0)->ds_ctl0;
604 		ads->ds_ctl1 = segLen;
605 	} else {			/* !firstSeg && !lastSeg */
606 		/*
607 		 * Intermediate descriptor in a multi-descriptor frame.
608 		 */
609 		ads->ds_ctl0 = 0;
610 		ads->ds_ctl1 = segLen | AR_More;
611 	}
612 	ads->ds_status0 = ads->ds_status1 = 0;
613 	return AH_TRUE;
614 }
615 
616 /*
617  * Processing of HW TX descriptor.
618  */
619 HAL_STATUS
620 ar5211ProcTxDesc(struct ath_hal *ah,
621 	struct ath_desc *ds, struct ath_tx_status *ts)
622 {
623 	struct ar5211_desc *ads = AR5211DESC(ds);
624 
625 	if ((ads->ds_status1 & AR_Done) == 0)
626 		return HAL_EINPROGRESS;
627 
628 	/* Update software copies of the HW status */
629 	ts->ts_seqnum = MS(ads->ds_status1, AR_SeqNum);
630 	ts->ts_tstamp = MS(ads->ds_status0, AR_SendTimestamp);
631 	ts->ts_status = 0;
632 	if ((ads->ds_status0 & AR_FrmXmitOK) == 0) {
633 		if (ads->ds_status0 & AR_ExcessiveRetries)
634 			ts->ts_status |= HAL_TXERR_XRETRY;
635 		if (ads->ds_status0 & AR_Filtered)
636 			ts->ts_status |= HAL_TXERR_FILT;
637 		if (ads->ds_status0 & AR_FIFOUnderrun)
638 			ts->ts_status |= HAL_TXERR_FIFO;
639 	}
640 	ts->ts_rate = MS(ads->ds_ctl0, AR_XmitRate);
641 	ts->ts_rssi = MS(ads->ds_status1, AR_AckSigStrength);
642 	ts->ts_shortretry = MS(ads->ds_status0, AR_ShortRetryCnt);
643 	ts->ts_longretry = MS(ads->ds_status0, AR_LongRetryCnt);
644 	ts->ts_virtcol = MS(ads->ds_status0, AR_VirtCollCnt);
645 	ts->ts_antenna = 0;		/* NB: don't know */
646 	ts->ts_finaltsi = 0;
647 	/*
648 	 * NB: the number of retries is one less than it should be.
649 	 * Also, 0 retries and 1 retry are both reported as 0 retries.
650 	 */
651 	if (ts->ts_shortretry > 0)
652 		ts->ts_shortretry++;
653 	if (ts->ts_longretry > 0)
654 		ts->ts_longretry++;
655 
656 	return HAL_OK;
657 }
658 
659 /*
660  * Determine which tx queues need interrupt servicing.
661  * STUB.
662  */
663 void
664 ar5211GetTxIntrQueue(struct ath_hal *ah, uint32_t *txqs)
665 {
666 	return;
667 }
668 
669 /*
670  * Retrieve the rate table from the given TX completion descriptor
671  */
672 HAL_BOOL
673 ar5211GetTxCompletionRates(struct ath_hal *ah, const struct ath_desc *ds0, int *rates, int *tries)
674 {
675 	return AH_FALSE;
676 }
677 
678 
679 void
680 ar5211SetTxDescLink(struct ath_hal *ah, void *ds, uint32_t link)
681 {
682 	struct ar5211_desc *ads = AR5211DESC(ds);
683 
684 	ads->ds_link = link;
685 }
686 
687 void
688 ar5211GetTxDescLink(struct ath_hal *ah, void *ds, uint32_t *link)
689 {
690 	struct ar5211_desc *ads = AR5211DESC(ds);
691 
692 	*link = ads->ds_link;
693 }
694 
695 void
696 ar5211GetTxDescLinkPtr(struct ath_hal *ah, void *ds, uint32_t **linkptr)
697 {
698 	struct ar5211_desc *ads = AR5211DESC(ds);
699 
700 	*linkptr = &ads->ds_link;
701 }
702