xref: /freebsd/sys/dev/ath/ath_hal/ar5210/ar5210phy.h (revision b9f654b163bce26de79705e77b872427c9f2afa1)
1 /*-
2  * SPDX-License-Identifier: ISC
3  *
4  * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting
5  * Copyright (c) 2002-2004 Atheros Communications, Inc.
6  *
7  * Permission to use, copy, modify, and/or distribute this software for any
8  * purpose with or without fee is hereby granted, provided that the above
9  * copyright notice and this permission notice appear in all copies.
10  *
11  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
12  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
13  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
14  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
15  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
16  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
17  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
18  *
19  * $FreeBSD$
20  */
21 #ifndef _DEV_ATH_AR5210PHY_H
22 #define _DEV_ATH_AR5210PHY_H
23 
24 /*
25  * Definitions for the PHY on the Atheros AR5210 parts.
26  */
27 
28 /* PHY Registers */
29 #define	AR_PHY_BASE		0x9800		/* PHY register base */
30 #define	AR_PHY(_n)		(AR_PHY_BASE + ((_n)<<2))
31 
32 #define	AR_PHY_FRCTL		0x9804		/* PHY frame control */
33 #define	AR_PHY_TURBO_MODE	0x00000001	/* PHY turbo mode */
34 #define	AR_PHY_TURBO_SHORT	0x00000002	/* PHY turbo short symbol */
35 #define	AR_PHY_TIMING_ERR	0x01000000	/* Detect PHY timing error */
36 #define	AR_PHY_PARITY_ERR	0x02000000	/* Detect signal parity err */
37 #define	AR_PHY_ILLRATE_ERR	0x04000000	/* Detect PHY illegal rate */
38 #define	AR_PHY_ILLLEN_ERR	0x08000000	/* Detect PHY illegal length */
39 #define	AR_PHY_SERVICE_ERR	0x20000000	/* Detect PHY nonzero service */
40 #define	AR_PHY_TXURN_ERR	0x40000000	/* DetectPHY TX underrun */
41 #define	AR_PHY_FRCTL_BITS \
42 	"\20\1TURBO_MODE\2TURBO_SHORT\30TIMING_ERR\31PARITY_ERR\32ILLRATE_ERR"\
43 	"\33ILLEN_ERR\35SERVICE_ERR\36TXURN_ERR"
44 
45 #define	AR_PHY_AGC		0x9808		/* PHY AGC command */
46 #define	AR_PHY_AGC_DISABLE	0x08000000	/* Disable PHY AGC */
47 #define	AR_PHY_AGC_BITS	"\20\33DISABLE"
48 
49 #define	AR_PHY_CHIPID		0x9818		/* PHY chip revision */
50 
51 #define	AR_PHY_ACTIVE		0x981c		/* PHY activation */
52 #define	AR_PHY_ENABLE		0x00000001	/* activate PHY */
53 #define	AR_PHY_DISABLE		0x00000002	/* deactivate PHY */
54 #define	AR_PHY_ACTIVE_BITS	"\20\1ENABLE\2DISABLE"
55 
56 #define	AR_PHY_AGCCTL		0x9860		/* PHY calibration and noise floor */
57 #define	AR_PHY_AGC_CAL		0x00000001	/* PHY internal calibration */
58 #define	AR_PHY_AGC_NF		0x00000002	/* calc PHY noise-floor */
59 #define	AR_PHY_AGCCTL_BITS	"\20\1CAL\2NF"
60 
61 #endif /* _DEV_ATH_AR5210PHY_H */
62