1 /*- 2 * SPDX-License-Identifier: ISC 3 * 4 * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting 5 * Copyright (c) 2002-2004 Atheros Communications, Inc. 6 * 7 * Permission to use, copy, modify, and/or distribute this software for any 8 * purpose with or without fee is hereby granted, provided that the above 9 * copyright notice and this permission notice appear in all copies. 10 * 11 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 12 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 13 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 14 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 15 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 16 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 17 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 18 */ 19 #include "opt_ah.h" 20 21 #include "ah.h" 22 #include "ah_internal.h" 23 #include "ah_desc.h" 24 25 #include "ar5210/ar5210.h" 26 #include "ar5210/ar5210reg.h" 27 #include "ar5210/ar5210desc.h" 28 29 /* 30 * Return the hardware NextTBTT in TSF 31 */ 32 uint64_t 33 ar5210GetNextTBTT(struct ath_hal *ah) 34 { 35 #define TU_TO_TSF(_tu) (((uint64_t)(_tu)) << 10) 36 return TU_TO_TSF(OS_REG_READ(ah, AR_TIMER0)); 37 #undef TU_TO_TSF 38 } 39 40 /* 41 * Initialize all of the hardware registers used to send beacons. 42 */ 43 void 44 ar5210SetBeaconTimers(struct ath_hal *ah, const HAL_BEACON_TIMERS *bt) 45 { 46 47 OS_REG_WRITE(ah, AR_TIMER0, bt->bt_nexttbtt); 48 OS_REG_WRITE(ah, AR_TIMER1, bt->bt_nextdba); 49 OS_REG_WRITE(ah, AR_TIMER2, bt->bt_nextswba); 50 OS_REG_WRITE(ah, AR_TIMER3, bt->bt_nextatim); 51 /* 52 * Set the Beacon register after setting all timers. 53 */ 54 OS_REG_WRITE(ah, AR_BEACON, bt->bt_intval); 55 } 56 57 /* 58 * Legacy api to Initialize all of the beacon registers. 59 */ 60 void 61 ar5210BeaconInit(struct ath_hal *ah, 62 uint32_t next_beacon, uint32_t beacon_period) 63 { 64 HAL_BEACON_TIMERS bt; 65 66 bt.bt_nexttbtt = next_beacon; 67 68 if (AH_PRIVATE(ah)->ah_opmode != HAL_M_STA) { 69 bt.bt_nextdba = (next_beacon - 70 ah->ah_config.ah_dma_beacon_response_time) << 3; /* 1/8 TU */ 71 bt.bt_nextswba = (next_beacon - 72 ah->ah_config.ah_sw_beacon_response_time) << 3; /* 1/8 TU */ 73 /* 74 * The SWBA interrupt is not used for beacons in ad hoc mode 75 * as we don't yet support ATIMs. So since the beacon never 76 * changes, the beacon descriptor is set up once and read 77 * into a special HW buffer, from which it will be 78 * automagically retrieved at each DMA Beacon Alert (DBA). 79 */ 80 81 /* Set the ATIM window */ 82 bt.bt_nextatim = next_beacon + 0; /* NB: no ATIMs */ 83 } else { 84 bt.bt_nextdba = ~0; 85 bt.bt_nextswba = ~0; 86 bt.bt_nextatim = 1; 87 } 88 bt.bt_intval = beacon_period & 89 (AR_BEACON_PERIOD | AR_BEACON_RESET_TSF | AR_BEACON_EN); 90 ar5210SetBeaconTimers(ah, &bt); 91 } 92 93 void 94 ar5210ResetStaBeaconTimers(struct ath_hal *ah) 95 { 96 uint32_t val; 97 98 OS_REG_WRITE(ah, AR_TIMER0, 0); /* no beacons */ 99 val = OS_REG_READ(ah, AR_STA_ID1); 100 val |= AR_STA_ID1_NO_PSPOLL; /* XXX */ 101 /* tell the h/w that the associated AP is not PCF capable */ 102 OS_REG_WRITE(ah, AR_STA_ID1, 103 val & ~(AR_STA_ID1_DEFAULT_ANTENNA | AR_STA_ID1_PCF)); 104 OS_REG_WRITE(ah, AR_BEACON, AR_BEACON_PERIOD); 105 } 106 107 /* 108 * Set all the beacon related bits on the h/w for stations 109 * i.e. initializes the corresponding h/w timers; 110 * also tells the h/w whether to anticipate PCF beacons 111 * 112 * dtim_count and cfp_count from the current beacon - their current 113 * values aren't necessarily maintained in the device struct 114 */ 115 void 116 ar5210SetStaBeaconTimers(struct ath_hal *ah, const HAL_BEACON_STATE *bs) 117 { 118 struct ath_hal_5210 *ahp = AH5210(ah); 119 120 HALDEBUG(ah, HAL_DEBUG_BEACON, "%s: setting beacon timers\n", __func__); 121 122 HALASSERT(bs->bs_intval != 0); 123 /* if the AP will do PCF */ 124 if (bs->bs_cfpmaxduration != 0) { 125 /* tell the h/w that the associated AP is PCF capable */ 126 OS_REG_WRITE(ah, AR_STA_ID1, 127 (OS_REG_READ(ah, AR_STA_ID1) &~ AR_STA_ID1_DEFAULT_ANTENNA) 128 | AR_STA_ID1_PCF); 129 130 /* set CFP_PERIOD(1.024ms) register */ 131 OS_REG_WRITE(ah, AR_CFP_PERIOD, bs->bs_cfpperiod); 132 133 /* set CFP_DUR(1.024ms) register to max cfp duration */ 134 OS_REG_WRITE(ah, AR_CFP_DUR, bs->bs_cfpmaxduration); 135 136 /* set TIMER2(128us) to anticipated time of next CFP */ 137 OS_REG_WRITE(ah, AR_TIMER2, bs->bs_cfpnext << 3); 138 } else { 139 /* tell the h/w that the associated AP is not PCF capable */ 140 OS_REG_WRITE(ah, AR_STA_ID1, 141 OS_REG_READ(ah, AR_STA_ID1) &~ (AR_STA_ID1_DEFAULT_ANTENNA | AR_STA_ID1_PCF)); 142 } 143 144 /* 145 * Set TIMER0(1.024ms) to the anticipated time of the next beacon. 146 */ 147 OS_REG_WRITE(ah, AR_TIMER0, bs->bs_nexttbtt); 148 149 /* 150 * Start the beacon timers by setting the BEACON register 151 * to the beacon interval; also write the tim offset which 152 * we should know by now. The code, in ar5211WriteAssocid, 153 * also sets the tim offset once the AID is known which can 154 * be left as such for now. 155 */ 156 OS_REG_WRITE(ah, AR_BEACON, 157 (OS_REG_READ(ah, AR_BEACON) &~ (AR_BEACON_PERIOD|AR_BEACON_TIM)) 158 | SM(bs->bs_intval, AR_BEACON_PERIOD) 159 | SM(bs->bs_timoffset ? bs->bs_timoffset + 4 : 0, AR_BEACON_TIM) 160 ); 161 162 /* 163 * Configure the BMISS interrupt. Note that we 164 * assume the caller blocks interrupts while enabling 165 * the threshold. 166 */ 167 168 /* 169 * Interrupt works only on Crete. 170 */ 171 if (AH_PRIVATE(ah)->ah_macRev < AR_SREV_CRETE) 172 return; 173 /* 174 * Counter is only 3-bits. 175 * Count of 0 with BMISS interrupt enabled will hang the system 176 * with too many interrupts 177 */ 178 if (AH_PRIVATE(ah)->ah_macRev >= AR_SREV_CRETE && 179 (bs->bs_bmissthreshold&7) == 0) { 180 #ifdef AH_DEBUG 181 ath_hal_printf(ah, "%s: invalid beacon miss threshold %u\n", 182 __func__, bs->bs_bmissthreshold); 183 #endif 184 return; 185 } 186 #define BMISS_MAX (AR_RSSI_THR_BM_THR >> AR_RSSI_THR_BM_THR_S) 187 /* 188 * Configure the BMISS interrupt. Note that we 189 * assume the caller blocks interrupts while enabling 190 * the threshold. 191 * 192 * NB: the beacon miss count field is only 3 bits which 193 * is much smaller than what's found on later parts; 194 * clamp overflow values as a safeguard. 195 */ 196 ahp->ah_rssiThr = (ahp->ah_rssiThr &~ AR_RSSI_THR_BM_THR) 197 | SM(bs->bs_bmissthreshold > BMISS_MAX ? 198 BMISS_MAX : bs->bs_bmissthreshold, 199 AR_RSSI_THR_BM_THR); 200 OS_REG_WRITE(ah, AR_RSSI_THR, ahp->ah_rssiThr); 201 #undef BMISS_MAX 202 } 203