xref: /freebsd/sys/dev/ath/ath_hal/ah_internal.h (revision edf8578117e8844e02c0121147f45e4609b30680)
1 /*-
2  * SPDX-License-Identifier: ISC
3  *
4  * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
5  * Copyright (c) 2002-2008 Atheros Communications, Inc.
6  *
7  * Permission to use, copy, modify, and/or distribute this software for any
8  * purpose with or without fee is hereby granted, provided that the above
9  * copyright notice and this permission notice appear in all copies.
10  *
11  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
12  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
13  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
14  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
15  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
16  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
17  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
18  */
19 #ifndef _ATH_AH_INTERAL_H_
20 #define _ATH_AH_INTERAL_H_
21 /*
22  * Atheros Device Hardware Access Layer (HAL).
23  *
24  * Internal definitions.
25  */
26 #define	AH_NULL	0
27 #define	AH_MIN(a,b)	((a)<(b)?(a):(b))
28 #define	AH_MAX(a,b)	((a)>(b)?(a):(b))
29 
30 #include <net80211/_ieee80211.h>
31 #include <sys/queue.h>			/* XXX for reasons */
32 
33 #ifndef NBBY
34 #define	NBBY	8			/* number of bits/byte */
35 #endif
36 
37 #ifndef roundup
38 #define	roundup(x, y)	((((x)+((y)-1))/(y))*(y))  /* to any y */
39 #endif
40 #ifndef howmany
41 #define	howmany(x, y)	(((x)+((y)-1))/(y))
42 #endif
43 
44 #ifndef offsetof
45 #define	offsetof(type, field)	((size_t)(&((type *)0)->field))
46 #endif
47 
48 typedef struct {
49 	uint32_t	start;		/* first register */
50 	uint32_t	end;		/* ending register or zero */
51 } HAL_REGRANGE;
52 
53 typedef struct {
54 	uint32_t	addr;		/* regiser address/offset */
55 	uint32_t	value;		/* value to write */
56 } HAL_REGWRITE;
57 
58 /*
59  * Transmit power scale factor.
60  *
61  * NB: This is not public because we want to discourage the use of
62  *     scaling; folks should use the tx power limit interface.
63  */
64 typedef enum {
65 	HAL_TP_SCALE_MAX	= 0,		/* no scaling (default) */
66 	HAL_TP_SCALE_50		= 1,		/* 50% of max (-3 dBm) */
67 	HAL_TP_SCALE_25		= 2,		/* 25% of max (-6 dBm) */
68 	HAL_TP_SCALE_12		= 3,		/* 12% of max (-9 dBm) */
69 	HAL_TP_SCALE_MIN	= 4,		/* min, but still on */
70 } HAL_TP_SCALE;
71 
72 typedef enum {
73  	HAL_CAP_RADAR		= 0,		/* Radar capability */
74  	HAL_CAP_AR		= 1,		/* AR capability */
75 } HAL_PHYDIAG_CAPS;
76 
77 /*
78  * Enable/disable strong signal fast diversity
79  */
80 #define	HAL_CAP_STRONG_DIV		2
81 
82 /*
83  * Each chip or class of chips registers to offer support.
84  *
85  * Compiled-in versions will include a linker set to iterate through the
86  * linked in code.
87  *
88  * Modules will have to register HAL backends separately.
89  */
90 struct ath_hal_chip {
91 	const char	*name;
92 	const char	*(*probe)(uint16_t vendorid, uint16_t devid);
93 	struct ath_hal	*(*attach)(uint16_t devid, HAL_SOFTC,
94 			    HAL_BUS_TAG, HAL_BUS_HANDLE, uint16_t *eepromdata,
95 			    HAL_OPS_CONFIG *ah,
96 			    HAL_STATUS *error);
97 	TAILQ_ENTRY(ath_hal_chip) node;
98 };
99 #ifndef AH_CHIP
100 #define	AH_CHIP(_name, _probe, _attach)				\
101 struct ath_hal_chip _name##_chip = {				\
102 	.name		= #_name,				\
103 	.probe		= _probe,				\
104 	.attach		= _attach,				\
105 };								\
106 OS_DATA_SET(ah_chips, _name##_chip)
107 #endif
108 
109 /*
110  * Each RF backend registers to offer support; this is mostly
111  * used by multi-chip 5212 solutions.  Single-chip solutions
112  * have a fixed idea about which RF to use.
113  *
114  * Compiled in versions will include this linker set to iterate through
115  * the linked in code.
116  *
117  * Modules will have to register RF backends separately.
118  */
119 struct ath_hal_rf {
120 	const char	*name;
121 	HAL_BOOL	(*probe)(struct ath_hal *ah);
122 	HAL_BOOL	(*attach)(struct ath_hal *ah, HAL_STATUS *ecode);
123 	TAILQ_ENTRY(ath_hal_rf) node;
124 };
125 #ifndef AH_RF
126 #define	AH_RF(_name, _probe, _attach)				\
127 struct ath_hal_rf _name##_rf = {				\
128 	.name		= __STRING(_name),			\
129 	.probe		= _probe,				\
130 	.attach		= _attach,				\
131 };								\
132 OS_DATA_SET(ah_rfs, _name##_rf)
133 #endif
134 
135 struct ath_hal_rf *ath_hal_rfprobe(struct ath_hal *ah, HAL_STATUS *ecode);
136 
137 /*
138  * Maximum number of internal channels.  Entries are per unique
139  * frequency so this might be need to be increased to handle all
140  * usage cases; typically no more than 32 are really needed but
141  * dynamically allocating the data structures is a bit painful
142  * right now.
143  */
144 #ifndef AH_MAXCHAN
145 #define	AH_MAXCHAN	128
146 #endif
147 
148 #define	HAL_NF_CAL_HIST_LEN_FULL	5
149 #define	HAL_NF_CAL_HIST_LEN_SMALL	1
150 #define	HAL_NUM_NF_READINGS		6	/* 3 chains * (ctl + ext) */
151 #define	HAL_NF_LOAD_DELAY		1000
152 
153 /*
154  * PER_CHAN doesn't work for now, as it looks like the device layer
155  * has to pre-populate the per-channel list with nominal values.
156  */
157 //#define	ATH_NF_PER_CHAN		1
158 
159 typedef struct {
160     u_int8_t    curr_index;
161     int8_t      invalidNFcount; /* TO DO: REMOVE THIS! */
162     int16_t     priv_nf[HAL_NUM_NF_READINGS];
163 } HAL_NFCAL_BASE;
164 
165 typedef struct {
166     HAL_NFCAL_BASE base;
167     int16_t     nf_cal_buffer[HAL_NF_CAL_HIST_LEN_FULL][HAL_NUM_NF_READINGS];
168 } HAL_NFCAL_HIST_FULL;
169 
170 typedef struct {
171     HAL_NFCAL_BASE base;
172     int16_t     nf_cal_buffer[HAL_NF_CAL_HIST_LEN_SMALL][HAL_NUM_NF_READINGS];
173 } HAL_NFCAL_HIST_SMALL;
174 
175 #ifdef	ATH_NF_PER_CHAN
176 typedef HAL_NFCAL_HIST_FULL HAL_CHAN_NFCAL_HIST;
177 #define	AH_HOME_CHAN_NFCAL_HIST(ah, ichan) (ichan ? &ichan->nf_cal_hist: NULL)
178 #else
179 typedef HAL_NFCAL_HIST_SMALL HAL_CHAN_NFCAL_HIST;
180 #define	AH_HOME_CHAN_NFCAL_HIST(ah, ichan) (&AH_PRIVATE(ah)->nf_cal_hist)
181 #endif	/* ATH_NF_PER_CHAN */
182 
183 /*
184  * Internal per-channel state.  These are found
185  * using ic_devdata in the ieee80211_channel.
186  */
187 typedef struct {
188 	uint16_t	channel;	/* h/w frequency, NB: may be mapped */
189 	uint8_t		privFlags;
190 #define	CHANNEL_IQVALID		0x01	/* IQ calibration valid */
191 #define	CHANNEL_ANI_INIT	0x02	/* ANI state initialized */
192 #define	CHANNEL_ANI_SETUP	0x04	/* ANI state setup */
193 #define	CHANNEL_MIMO_NF_VALID	0x04	/* Mimo NF values are valid */
194 	uint8_t		calValid;	/* bitmask of cal types */
195 	int8_t		iCoff;
196 	int8_t		qCoff;
197 	int16_t		rawNoiseFloor;
198 	int16_t		noiseFloorAdjust;
199 	int16_t		noiseFloorCtl[AH_MAX_CHAINS];
200 	int16_t		noiseFloorExt[AH_MAX_CHAINS];
201 	uint16_t	mainSpur;	/* cached spur value for this channel */
202 
203 	/*XXX TODO: make these part of privFlags */
204 	uint8_t  paprd_done:1,           /* 1: PAPRD DONE, 0: PAPRD Cal not done */
205 	       paprd_table_write_done:1; /* 1: DONE, 0: Cal data write not done */
206 	int		one_time_cals_done;
207 	HAL_CHAN_NFCAL_HIST nf_cal_hist;
208 } HAL_CHANNEL_INTERNAL;
209 
210 /* channel requires noise floor check */
211 #define	CHANNEL_NFCREQUIRED	IEEE80211_CHAN_PRIV0
212 
213 /* all full-width channels */
214 #define	IEEE80211_CHAN_ALLFULL \
215 	(IEEE80211_CHAN_ALL - (IEEE80211_CHAN_HALF | IEEE80211_CHAN_QUARTER))
216 #define	IEEE80211_CHAN_ALLTURBOFULL \
217 	(IEEE80211_CHAN_ALLTURBO - \
218 	 (IEEE80211_CHAN_HALF | IEEE80211_CHAN_QUARTER))
219 
220 typedef struct {
221 	uint32_t	halChanSpreadSupport 		: 1,
222 			halSleepAfterBeaconBroken	: 1,
223 			halCompressSupport		: 1,
224 			halBurstSupport			: 1,
225 			halFastFramesSupport		: 1,
226 			halChapTuningSupport		: 1,
227 			halTurboGSupport		: 1,
228 			halTurboPrimeSupport		: 1,
229 			halMicAesCcmSupport		: 1,
230 			halMicCkipSupport		: 1,
231 			halMicTkipSupport		: 1,
232 			halTkipMicTxRxKeySupport	: 1,
233 			halCipherAesCcmSupport		: 1,
234 			halCipherCkipSupport		: 1,
235 			halCipherTkipSupport		: 1,
236 			halPSPollBroken			: 1,
237 			halVEOLSupport			: 1,
238 			halBssIdMaskSupport		: 1,
239 			halMcastKeySrchSupport		: 1,
240 			halTsfAddSupport		: 1,
241 			halChanHalfRate			: 1,
242 			halChanQuarterRate		: 1,
243 			halHTSupport			: 1,
244 			halHTSGI20Support		: 1,
245 			halRfSilentSupport		: 1,
246 			halHwPhyCounterSupport		: 1,
247 			halWowSupport			: 1,
248 			halWowMatchPatternExact		: 1,
249 			halAutoSleepSupport		: 1,
250 			halFastCCSupport		: 1,
251 			halBtCoexSupport		: 1;
252 	uint32_t	halRxStbcSupport		: 1,
253 			halTxStbcSupport		: 1,
254 			halGTTSupport			: 1,
255 			halCSTSupport			: 1,
256 			halRifsRxSupport		: 1,
257 			halRifsTxSupport		: 1,
258 			hal4AddrAggrSupport		: 1,
259 			halExtChanDfsSupport		: 1,
260 			halUseCombinedRadarRssi		: 1,
261 			halForcePpmSupport		: 1,
262 			halEnhancedPmSupport		: 1,
263 			halEnhancedDfsSupport		: 1,
264 			halMbssidAggrSupport		: 1,
265 			halBssidMatchSupport		: 1,
266 			hal4kbSplitTransSupport		: 1,
267 			halHasRxSelfLinkedTail		: 1,
268 			halSupportsFastClock5GHz	: 1,
269 			halHasBBReadWar			: 1,
270 			halSerialiseRegWar		: 1,
271 			halMciSupport			: 1,
272 			halRxTxAbortSupport		: 1,
273 			halPaprdEnabled			: 1,
274 			halHasUapsdSupport		: 1,
275 			halWpsPushButtonSupport		: 1,
276 			halBtCoexApsmWar		: 1,
277 			halGenTimerSupport		: 1,
278 			halLDPCSupport			: 1,
279 			halHwBeaconProcSupport		: 1,
280 			halEnhancedDmaSupport		: 1;
281 	uint32_t	halIsrRacSupport		: 1,
282 			halApmEnable			: 1,
283 			halIntrMitigation		: 1,
284 			hal49GhzSupport			: 1,
285 			halAntDivCombSupport		: 1,
286 			halAntDivCombSupportOrg		: 1,
287 			halRadioRetentionSupport	: 1,
288 			halSpectralScanSupport		: 1,
289 			halRxUsingLnaMixing		: 1,
290 			halRxDoMyBeacon			: 1,
291 			halHwUapsdTrig			: 1;
292 
293 	uint32_t	halWirelessModes;
294 	uint16_t	halTotalQueues;
295 	uint16_t	halKeyCacheSize;
296 	uint16_t	halLow5GhzChan, halHigh5GhzChan;
297 	uint16_t	halLow2GhzChan, halHigh2GhzChan;
298 	int		halTxTstampPrecision;
299 	int		halRxTstampPrecision;
300 	int		halRtsAggrLimit;
301 	uint8_t		halTxChainMask;
302 	uint8_t		halRxChainMask;
303 	uint8_t		halNumGpioPins;
304 	uint8_t		halNumAntCfg2GHz;
305 	uint8_t		halNumAntCfg5GHz;
306 	uint32_t	halIntrMask;
307 	uint8_t		halTxStreams;
308 	uint8_t		halRxStreams;
309 	HAL_MFP_OPT_T	halMfpSupport;
310 
311 	/* AR9300 HAL porting capabilities */
312 	int		hal_paprd_enabled;
313 	int		hal_pcie_lcr_offset;
314 	int		hal_pcie_lcr_extsync_en;
315 	int		halNumTxMaps;
316 	int		halTxDescLen;
317 	int		halTxStatusLen;
318 	int		halRxStatusLen;
319 	int		halRxHpFifoDepth;
320 	int		halRxLpFifoDepth;
321 	uint32_t	halRegCap;		/* XXX needed? */
322 	int		halNumMRRetries;
323 	int		hal_ani_poll_interval;
324 	int		hal_channel_switch_time_usec;
325 } HAL_CAPABILITIES;
326 
327 struct regDomain;
328 
329 /*
330  * Definitions for ah_flags in ath_hal_private
331  */
332 #define		AH_USE_EEPROM	0x1
333 #define		AH_IS_HB63	0x2
334 
335 /*
336  * The ``private area'' follows immediately after the ``public area''
337  * in the data structure returned by ath_hal_attach.  Private data are
338  * used by device-independent code such as the regulatory domain support.
339  * In general, code within the HAL should never depend on data in the
340  * public area.  Instead any public data needed internally should be
341  * shadowed here.
342  *
343  * When declaring a device-specific ath_hal data structure this structure
344  * is assumed to at the front; e.g.
345  *
346  *	struct ath_hal_5212 {
347  *		struct ath_hal_private	ah_priv;
348  *		...
349  *	};
350  *
351  * It might be better to manage the method pointers in this structure
352  * using an indirect pointer to a read-only data structure but this would
353  * disallow class-style method overriding.
354  */
355 struct ath_hal_private {
356 	struct ath_hal	h;			/* public area */
357 
358 	/* NB: all methods go first to simplify initialization */
359 	HAL_BOOL	(*ah_getChannelEdges)(struct ath_hal*,
360 				uint16_t channelFlags,
361 				uint16_t *lowChannel, uint16_t *highChannel);
362 	u_int		(*ah_getWirelessModes)(struct ath_hal*);
363 	HAL_BOOL	(*ah_eepromRead)(struct ath_hal *, u_int off,
364 				uint16_t *data);
365 	HAL_BOOL	(*ah_eepromWrite)(struct ath_hal *, u_int off,
366 				uint16_t data);
367 	HAL_BOOL	(*ah_getChipPowerLimits)(struct ath_hal *,
368 				struct ieee80211_channel *);
369 	int16_t		(*ah_getNfAdjust)(struct ath_hal *,
370 				const HAL_CHANNEL_INTERNAL*);
371 	void		(*ah_getNoiseFloor)(struct ath_hal *,
372 				int16_t nfarray[]);
373 
374 	void		*ah_eeprom;		/* opaque EEPROM state */
375 	uint16_t	ah_eeversion;		/* EEPROM version */
376 	void		(*ah_eepromDetach)(struct ath_hal *);
377 	HAL_STATUS	(*ah_eepromGet)(struct ath_hal *, int, void *);
378 	HAL_STATUS	(*ah_eepromSet)(struct ath_hal *, int, int);
379 	uint16_t	(*ah_getSpurChan)(struct ath_hal *, int, HAL_BOOL);
380 	HAL_BOOL	(*ah_eepromDiag)(struct ath_hal *, int request,
381 			    const void *args, uint32_t argsize,
382 			    void **result, uint32_t *resultsize);
383 
384 	/*
385 	 * Device revision information.
386 	 */
387 	uint16_t	ah_devid;		/* PCI device ID */
388 	uint16_t	ah_subvendorid;		/* PCI subvendor ID */
389 	uint32_t	ah_macVersion;		/* MAC version id */
390 	uint16_t	ah_macRev;		/* MAC revision */
391 	uint16_t	ah_phyRev;		/* PHY revision */
392 	uint16_t	ah_analog5GhzRev;	/* 2GHz radio revision */
393 	uint16_t	ah_analog2GhzRev;	/* 5GHz radio revision */
394 	uint32_t	ah_flags;		/* misc flags */
395 	uint8_t		ah_ispcie;		/* PCIE, special treatment */
396 	uint8_t		ah_devType;		/* card type - CB, PCI, PCIe */
397 
398 	HAL_OPMODE	ah_opmode;		/* operating mode from reset */
399 	const struct ieee80211_channel *ah_curchan;/* operating channel */
400 	HAL_CAPABILITIES ah_caps;		/* device capabilities */
401 	uint32_t	ah_diagreg;		/* user-specified AR_DIAG_SW */
402 	int16_t		ah_powerLimit;		/* tx power cap */
403 	uint16_t	ah_maxPowerLevel;	/* calculated max tx power */
404 	u_int		ah_tpScale;		/* tx power scale factor */
405 	u_int16_t	ah_extraTxPow;		/* low rates extra-txpower */
406 	uint32_t	ah_11nCompat;		/* 11n compat controls */
407 
408 	/*
409 	 * State for regulatory domain handling.
410 	 */
411 	HAL_REG_DOMAIN	ah_currentRD;		/* EEPROM regulatory domain */
412 	HAL_REG_DOMAIN	ah_currentRDext;	/* EEPROM extended regdomain flags */
413 	HAL_DFS_DOMAIN	ah_dfsDomain;		/* current DFS domain */
414 	HAL_CHANNEL_INTERNAL ah_channels[AH_MAXCHAN]; /* private chan state */
415 	u_int		ah_nchan;		/* valid items in ah_channels */
416 	const struct regDomain *ah_rd2GHz;	/* reg state for 2G band */
417 	const struct regDomain *ah_rd5GHz;	/* reg state for 5G band */
418 
419 	uint8_t    	ah_coverageClass;   	/* coverage class */
420 	/*
421 	 * RF Silent handling; setup according to the EEPROM.
422 	 */
423 	uint16_t	ah_rfsilent;		/* GPIO pin + polarity */
424 	HAL_BOOL	ah_rfkillEnabled;	/* enable/disable RfKill */
425 	/*
426 	 * Diagnostic support for discriminating HIUERR reports.
427 	 */
428 	uint32_t	ah_fatalState[6];	/* AR_ISR+shadow regs */
429 	int		ah_rxornIsFatal;	/* how to treat HAL_INT_RXORN */
430 
431 	/* Only used if ATH_NF_PER_CHAN is defined */
432 	HAL_NFCAL_HIST_FULL	nf_cal_hist;
433 
434 	/*
435 	 * Channel survey history - current channel only.
436 	 */
437 	 HAL_CHANNEL_SURVEY	ah_chansurvey;	/* channel survey */
438 };
439 
440 #define	AH_PRIVATE(_ah)	((struct ath_hal_private *)(_ah))
441 
442 #define	ath_hal_getChannelEdges(_ah, _cf, _lc, _hc) \
443 	AH_PRIVATE(_ah)->ah_getChannelEdges(_ah, _cf, _lc, _hc)
444 #define	ath_hal_getWirelessModes(_ah) \
445 	AH_PRIVATE(_ah)->ah_getWirelessModes(_ah)
446 #define	ath_hal_eepromRead(_ah, _off, _data) \
447 	AH_PRIVATE(_ah)->ah_eepromRead(_ah, _off, _data)
448 #define	ath_hal_eepromWrite(_ah, _off, _data) \
449 	AH_PRIVATE(_ah)->ah_eepromWrite(_ah, _off, _data)
450 #define	ath_hal_gpioCfgOutput(_ah, _gpio, _type) \
451 	(_ah)->ah_gpioCfgOutput(_ah, _gpio, _type)
452 #define	ath_hal_gpioCfgInput(_ah, _gpio) \
453 	(_ah)->ah_gpioCfgInput(_ah, _gpio)
454 #define	ath_hal_gpioGet(_ah, _gpio) \
455 	(_ah)->ah_gpioGet(_ah, _gpio)
456 #define	ath_hal_gpioSet(_ah, _gpio, _val) \
457 	(_ah)->ah_gpioSet(_ah, _gpio, _val)
458 #define	ath_hal_gpioSetIntr(_ah, _gpio, _ilevel) \
459 	(_ah)->ah_gpioSetIntr(_ah, _gpio, _ilevel)
460 #define	ath_hal_getpowerlimits(_ah, _chan) \
461 	AH_PRIVATE(_ah)->ah_getChipPowerLimits(_ah, _chan)
462 #define ath_hal_getNfAdjust(_ah, _c) \
463 	AH_PRIVATE(_ah)->ah_getNfAdjust(_ah, _c)
464 #define	ath_hal_getNoiseFloor(_ah, _nfArray) \
465 	AH_PRIVATE(_ah)->ah_getNoiseFloor(_ah, _nfArray)
466 #define	ath_hal_configPCIE(_ah, _reset, _poweroff) \
467 	(_ah)->ah_configPCIE(_ah, _reset, _poweroff)
468 #define	ath_hal_disablePCIE(_ah) \
469 	(_ah)->ah_disablePCIE(_ah)
470 #define	ath_hal_setInterrupts(_ah, _mask) \
471 	(_ah)->ah_setInterrupts(_ah, _mask)
472 
473 #define ath_hal_isrfkillenabled(_ah)  \
474     (ath_hal_getcapability(_ah, HAL_CAP_RFSILENT, 1, AH_NULL) == HAL_OK)
475 #define ath_hal_enable_rfkill(_ah, _v) \
476     ath_hal_setcapability(_ah, HAL_CAP_RFSILENT, 1, _v, AH_NULL)
477 #define ath_hal_hasrfkill_int(_ah)  \
478     (ath_hal_getcapability(_ah, HAL_CAP_RFSILENT, 3, AH_NULL) == HAL_OK)
479 
480 #define	ath_hal_eepromDetach(_ah) do {				\
481 	if (AH_PRIVATE(_ah)->ah_eepromDetach != AH_NULL)	\
482 		AH_PRIVATE(_ah)->ah_eepromDetach(_ah);		\
483 } while (0)
484 #define	ath_hal_eepromGet(_ah, _param, _val) \
485 	AH_PRIVATE(_ah)->ah_eepromGet(_ah, _param, _val)
486 #define	ath_hal_eepromSet(_ah, _param, _val) \
487 	AH_PRIVATE(_ah)->ah_eepromSet(_ah, _param, _val)
488 #define	ath_hal_eepromGetFlag(_ah, _param) \
489 	(AH_PRIVATE(_ah)->ah_eepromGet(_ah, _param, AH_NULL) == HAL_OK)
490 #define ath_hal_getSpurChan(_ah, _ix, _is2G) \
491 	AH_PRIVATE(_ah)->ah_getSpurChan(_ah, _ix, _is2G)
492 #define	ath_hal_eepromDiag(_ah, _request, _a, _asize, _r, _rsize) \
493 	AH_PRIVATE(_ah)->ah_eepromDiag(_ah, _request, _a, _asize,  _r, _rsize)
494 
495 #ifndef _NET_IF_IEEE80211_H_
496 /*
497  * Stuff that would naturally come from _ieee80211.h
498  */
499 #define	IEEE80211_ADDR_LEN		6
500 
501 #define	IEEE80211_WEP_IVLEN			3	/* 24bit */
502 #define	IEEE80211_WEP_KIDLEN			1	/* 1 octet */
503 #define	IEEE80211_WEP_CRCLEN			4	/* CRC-32 */
504 
505 #define	IEEE80211_CRC_LEN			4
506 
507 #define	IEEE80211_MAX_LEN			(2300 + IEEE80211_CRC_LEN + \
508     (IEEE80211_WEP_IVLEN + IEEE80211_WEP_KIDLEN + IEEE80211_WEP_CRCLEN))
509 #endif /* _NET_IF_IEEE80211_H_ */
510 
511 #define HAL_TXQ_USE_LOCKOUT_BKOFF_DIS	0x00000001
512 
513 #define INIT_AIFS		2
514 #define INIT_CWMIN		15
515 #define INIT_CWMIN_11B		31
516 #define INIT_CWMAX		1023
517 #define INIT_SH_RETRY		10
518 #define INIT_LG_RETRY		10
519 #define INIT_SSH_RETRY		32
520 #define INIT_SLG_RETRY		32
521 
522 typedef struct {
523 	uint32_t	tqi_ver;		/* HAL TXQ verson */
524 	HAL_TX_QUEUE	tqi_type;		/* hw queue type*/
525 	HAL_TX_QUEUE_SUBTYPE tqi_subtype;	/* queue subtype, if applicable */
526 	HAL_TX_QUEUE_FLAGS tqi_qflags;		/* queue flags */
527 	uint32_t	tqi_priority;
528 	uint32_t	tqi_aifs;		/* aifs */
529 	uint32_t	tqi_cwmin;		/* cwMin */
530 	uint32_t	tqi_cwmax;		/* cwMax */
531 	uint16_t	tqi_shretry;		/* frame short retry limit */
532 	uint16_t	tqi_lgretry;		/* frame long retry limit */
533 	uint32_t	tqi_cbrPeriod;
534 	uint32_t	tqi_cbrOverflowLimit;
535 	uint32_t	tqi_burstTime;
536 	uint32_t	tqi_readyTime;
537 	uint32_t	tqi_physCompBuf;
538 	uint32_t	tqi_intFlags;		/* flags for internal use */
539 } HAL_TX_QUEUE_INFO;
540 
541 extern	HAL_BOOL ath_hal_setTxQProps(struct ath_hal *ah,
542 		HAL_TX_QUEUE_INFO *qi, const HAL_TXQ_INFO *qInfo);
543 extern	HAL_BOOL ath_hal_getTxQProps(struct ath_hal *ah,
544 		HAL_TXQ_INFO *qInfo, const HAL_TX_QUEUE_INFO *qi);
545 
546 #define	HAL_SPUR_VAL_MASK		0x3FFF
547 #define	HAL_SPUR_CHAN_WIDTH		87
548 #define	HAL_BIN_WIDTH_BASE_100HZ	3125
549 #define	HAL_BIN_WIDTH_TURBO_100HZ	6250
550 #define	HAL_MAX_BINS_ALLOWED		28
551 
552 #define	IS_CHAN_5GHZ(_c)	((_c)->channel > 4900)
553 #define	IS_CHAN_2GHZ(_c)	(!IS_CHAN_5GHZ(_c))
554 
555 #define	IS_CHAN_IN_PUBLIC_SAFETY_BAND(_c) ((_c) > 4940 && (_c) < 4990)
556 
557 /*
558  * Deduce if the host cpu has big- or litt-endian byte order.
559  */
560 static __inline__ int
561 isBigEndian(void)
562 {
563 	union {
564 		int32_t i;
565 		char c[4];
566 	} u;
567 	u.i = 1;
568 	return (u.c[0] == 0);
569 }
570 
571 /* unalligned little endian access */
572 #define LE_READ_2(p)							\
573 	((uint16_t)							\
574 	 ((((const uint8_t *)(p))[0]    ) | (((const uint8_t *)(p))[1]<< 8)))
575 #define LE_READ_4(p)							\
576 	((uint32_t)							\
577 	 ((((const uint8_t *)(p))[0]    ) | (((const uint8_t *)(p))[1]<< 8) |\
578 	  (((const uint8_t *)(p))[2]<<16) | (((const uint8_t *)(p))[3]<<24)))
579 
580 /*
581  * Register manipulation macros that expect bit field defines
582  * to follow the convention that an _S suffix is appended for
583  * a shift count, while the field mask has no suffix.
584  */
585 #define	SM(_v, _f)	(((_v) << _f##_S) & (_f))
586 #define	MS(_v, _f)	(((_v) & (_f)) >> _f##_S)
587 #define OS_REG_RMW(_a, _r, _set, _clr)    \
588 	OS_REG_WRITE(_a, _r, (OS_REG_READ(_a, _r) & ~(_clr)) | (_set))
589 #define	OS_REG_RMW_FIELD(_a, _r, _f, _v) \
590 	OS_REG_WRITE(_a, _r, \
591 		(OS_REG_READ(_a, _r) &~ (_f)) | (((_v) << _f##_S) & (_f)))
592 #define	OS_REG_SET_BIT(_a, _r, _f) \
593 	OS_REG_WRITE(_a, _r, OS_REG_READ(_a, _r) | (_f))
594 #define	OS_REG_CLR_BIT(_a, _r, _f) \
595 	OS_REG_WRITE(_a, _r, OS_REG_READ(_a, _r) &~ (_f))
596 #define OS_REG_IS_BIT_SET(_a, _r, _f) \
597 	    ((OS_REG_READ(_a, _r) & (_f)) != 0)
598 #define	OS_REG_RMW_FIELD_ALT(_a, _r, _f, _v) \
599 	    OS_REG_WRITE(_a, _r, \
600 	    (OS_REG_READ(_a, _r) &~(_f<<_f##_S)) | \
601 	    (((_v) << _f##_S) & (_f<<_f##_S)))
602 #define	OS_REG_READ_FIELD(_a, _r, _f) \
603 	    (((OS_REG_READ(_a, _r) & _f) >> _f##_S))
604 #define	OS_REG_READ_FIELD_ALT(_a, _r, _f) \
605 	    ((OS_REG_READ(_a, _r) >> (_f##_S))&(_f))
606 
607 /* Analog register writes may require a delay between each one (eg Merlin?) */
608 #define	OS_A_REG_RMW_FIELD(_a, _r, _f, _v) \
609 	do { OS_REG_WRITE(_a, _r, (OS_REG_READ(_a, _r) &~ (_f)) | \
610 	    (((_v) << _f##_S) & (_f))) ; OS_DELAY(100); } while (0)
611 #define	OS_A_REG_WRITE(_a, _r, _v) \
612 	do { OS_REG_WRITE(_a, _r, _v); OS_DELAY(100); } while (0)
613 
614 /* wait for the register contents to have the specified value */
615 extern	HAL_BOOL ath_hal_wait(struct ath_hal *, u_int reg,
616 		uint32_t mask, uint32_t val);
617 extern	HAL_BOOL ath_hal_waitfor(struct ath_hal *, u_int reg,
618 		uint32_t mask, uint32_t val, uint32_t timeout);
619 
620 /* return the first n bits in val reversed */
621 extern	uint32_t ath_hal_reverseBits(uint32_t val, uint32_t n);
622 
623 /* printf interfaces */
624 extern	void ath_hal_printf(struct ath_hal *, const char*, ...)
625 		__printflike(2,3);
626 extern	void ath_hal_vprintf(struct ath_hal *, const char*, __va_list)
627 		__printflike(2, 0);
628 extern	const char* ath_hal_ether_sprintf(const uint8_t *mac);
629 
630 /* allocate and free memory */
631 extern	void *ath_hal_malloc(size_t);
632 extern	void ath_hal_free(void *);
633 
634 /* common debugging interfaces */
635 #ifdef AH_DEBUG
636 #include "ah_debug.h"
637 extern	int ath_hal_debug;	/* Global debug flags */
638 
639 /*
640  * The typecast is purely because some callers will pass in
641  * AH_NULL directly rather than using a NULL ath_hal pointer.
642  */
643 #define	HALDEBUG(_ah, __m, ...) \
644 	do {							\
645 		if ((__m) == HAL_DEBUG_UNMASKABLE ||		\
646 		    ath_hal_debug & (__m) ||			\
647 		    ((_ah) != NULL &&				\
648 		      ((struct ath_hal *) (_ah))->ah_config.ah_debug & (__m))) {	\
649 			DO_HALDEBUG((_ah), (__m), __VA_ARGS__);	\
650 		}						\
651 	} while(0);
652 
653 extern	void DO_HALDEBUG(struct ath_hal *ah, u_int mask, const char* fmt, ...)
654 	__printflike(3,4);
655 #else
656 #define HALDEBUG(_ah, __m, ...)
657 #endif /* AH_DEBUG */
658 
659 /*
660  * Register logging definitions shared with ardecode.
661  */
662 #include "ah_decode.h"
663 
664 /*
665  * Common assertion interface.  Note: it is a bad idea to generate
666  * an assertion failure for any recoverable event.  Instead catch
667  * the violation and, if possible, fix it up or recover from it; either
668  * with an error return value or a diagnostic messages.  System software
669  * does not panic unless the situation is hopeless.
670  */
671 #ifdef AH_ASSERT
672 extern	void ath_hal_assert_failed(const char* filename,
673 		int lineno, const char* msg);
674 
675 #define	HALASSERT(_x) do {					\
676 	if (!(_x)) {						\
677 		ath_hal_assert_failed(__FILE__, __LINE__, #_x);	\
678 	}							\
679 } while (0)
680 #else
681 #define	HALASSERT(_x)
682 #endif /* AH_ASSERT */
683 
684 /*
685  * Regulatory domain support.
686  */
687 
688 /*
689  * Return the max allowed antenna gain and apply any regulatory
690  * domain specific changes.
691  */
692 u_int	ath_hal_getantennareduction(struct ath_hal *ah,
693 	    const struct ieee80211_channel *chan, u_int twiceGain);
694 
695 /*
696  * Return the test group for the specific channel based on
697  * the current regulatory setup.
698  */
699 u_int	ath_hal_getctl(struct ath_hal *, const struct ieee80211_channel *);
700 
701 /*
702  * Map a public channel definition to the corresponding
703  * internal data structure.  This implicitly specifies
704  * whether or not the specified channel is ok to use
705  * based on the current regulatory domain constraints.
706  */
707 #ifndef AH_DEBUG
708 static OS_INLINE HAL_CHANNEL_INTERNAL *
709 ath_hal_checkchannel(struct ath_hal *ah, const struct ieee80211_channel *c)
710 {
711 	HAL_CHANNEL_INTERNAL *cc;
712 
713 	HALASSERT(c->ic_devdata < AH_PRIVATE(ah)->ah_nchan);
714 	cc = &AH_PRIVATE(ah)->ah_channels[c->ic_devdata];
715 	HALASSERT(c->ic_freq == cc->channel || IEEE80211_IS_CHAN_GSM(c));
716 	return cc;
717 }
718 #else
719 /* NB: non-inline version that checks state */
720 HAL_CHANNEL_INTERNAL *ath_hal_checkchannel(struct ath_hal *,
721 		const struct ieee80211_channel *);
722 #endif /* AH_DEBUG */
723 
724 /*
725  * Return the h/w frequency for a channel.  This may be
726  * different from ic_freq if this is a GSM device that
727  * takes 2.4GHz frequencies and down-converts them.
728  */
729 static OS_INLINE uint16_t
730 ath_hal_gethwchannel(struct ath_hal *ah, const struct ieee80211_channel *c)
731 {
732 	return ath_hal_checkchannel(ah, c)->channel;
733 }
734 
735 /*
736  * Generic get/set capability support.  Each chip overrides
737  * this routine to support chip-specific capabilities.
738  */
739 extern	HAL_STATUS ath_hal_getcapability(struct ath_hal *ah,
740 		HAL_CAPABILITY_TYPE type, uint32_t capability,
741 		uint32_t *result);
742 extern	HAL_BOOL ath_hal_setcapability(struct ath_hal *ah,
743 		HAL_CAPABILITY_TYPE type, uint32_t capability,
744 		uint32_t setting, HAL_STATUS *status);
745 
746 /* The diagnostic codes used to be internally defined here -adrian */
747 #include "ah_diagcodes.h"
748 
749 /*
750  * The AR5416 and later HALs have MAC and baseband hang checking.
751  */
752 typedef struct {
753 	uint32_t hang_reg_offset;
754 	uint32_t hang_val;
755 	uint32_t hang_mask;
756 	uint32_t hang_offset;
757 } hal_hw_hang_check_t;
758 
759 typedef struct {
760 	uint32_t dma_dbg_3;
761 	uint32_t dma_dbg_4;
762 	uint32_t dma_dbg_5;
763 	uint32_t dma_dbg_6;
764 } mac_dbg_regs_t;
765 
766 typedef enum {
767 	dcu_chain_state		= 0x1,
768 	dcu_complete_state	= 0x2,
769 	qcu_state		= 0x4,
770 	qcu_fsp_ok		= 0x8,
771 	qcu_fsp_state		= 0x10,
772 	qcu_stitch_state	= 0x20,
773 	qcu_fetch_state		= 0x40,
774 	qcu_complete_state	= 0x80
775 } hal_mac_hangs_t;
776 
777 typedef struct {
778 	int states;
779 	uint8_t dcu_chain_state;
780 	uint8_t dcu_complete_state;
781 	uint8_t qcu_state;
782 	uint8_t qcu_fsp_ok;
783 	uint8_t qcu_fsp_state;
784 	uint8_t qcu_stitch_state;
785 	uint8_t qcu_fetch_state;
786 	uint8_t qcu_complete_state;
787 } hal_mac_hang_check_t;
788 
789 enum {
790     HAL_BB_HANG_DFS		= 0x0001,
791     HAL_BB_HANG_RIFS		= 0x0002,
792     HAL_BB_HANG_RX_CLEAR	= 0x0004,
793     HAL_BB_HANG_UNKNOWN		= 0x0080,
794 
795     HAL_MAC_HANG_SIG1		= 0x0100,
796     HAL_MAC_HANG_SIG2		= 0x0200,
797     HAL_MAC_HANG_UNKNOWN	= 0x8000,
798 
799     HAL_BB_HANGS = HAL_BB_HANG_DFS
800 		 | HAL_BB_HANG_RIFS
801 		 | HAL_BB_HANG_RX_CLEAR
802 		 | HAL_BB_HANG_UNKNOWN,
803     HAL_MAC_HANGS = HAL_MAC_HANG_SIG1
804 		 | HAL_MAC_HANG_SIG2
805 		 | HAL_MAC_HANG_UNKNOWN,
806 };
807 
808 /* Merge these with above */
809 typedef enum hal_hw_hangs {
810     HAL_DFS_BB_HANG_WAR          = 0x1,
811     HAL_RIFS_BB_HANG_WAR         = 0x2,
812     HAL_RX_STUCK_LOW_BB_HANG_WAR = 0x4,
813     HAL_MAC_HANG_WAR             = 0x8,
814     HAL_PHYRESTART_CLR_WAR       = 0x10,
815     HAL_MAC_HANG_DETECTED        = 0x40000000,
816     HAL_BB_HANG_DETECTED         = 0x80000000
817 } hal_hw_hangs_t;
818 
819 /*
820  * Device revision information.
821  */
822 typedef struct {
823 	uint16_t	ah_devid;		/* PCI device ID */
824 	uint16_t	ah_subvendorid;		/* PCI subvendor ID */
825 	uint32_t	ah_macVersion;		/* MAC version id */
826 	uint16_t	ah_macRev;		/* MAC revision */
827 	uint16_t	ah_phyRev;		/* PHY revision */
828 	uint16_t	ah_analog5GhzRev;	/* 2GHz radio revision */
829 	uint16_t	ah_analog2GhzRev;	/* 5GHz radio revision */
830 } HAL_REVS;
831 
832 /*
833  * Argument payload for HAL_DIAG_SETKEY.
834  */
835 typedef struct {
836 	HAL_KEYVAL	dk_keyval;
837 	uint16_t	dk_keyix;	/* key index */
838 	uint8_t		dk_mac[IEEE80211_ADDR_LEN];
839 	int		dk_xor;		/* XOR key data */
840 } HAL_DIAG_KEYVAL;
841 
842 /*
843  * Argument payload for HAL_DIAG_EEWRITE.
844  */
845 typedef struct {
846 	uint16_t	ee_off;		/* eeprom offset */
847 	uint16_t	ee_data;	/* write data */
848 } HAL_DIAG_EEVAL;
849 
850 typedef struct {
851 	u_int offset;		/* reg offset */
852 	uint32_t val;		/* reg value  */
853 } HAL_DIAG_REGVAL;
854 
855 /*
856  * 11n compatibility tweaks.
857  */
858 #define	HAL_DIAG_11N_SERVICES	0x00000003
859 #define	HAL_DIAG_11N_SERVICES_S	0
860 #define	HAL_DIAG_11N_TXSTOMP	0x0000000c
861 #define	HAL_DIAG_11N_TXSTOMP_S	2
862 
863 typedef struct {
864 	int		maxNoiseImmunityLevel;	/* [0..4] */
865 	int		totalSizeDesired[5];
866 	int		coarseHigh[5];
867 	int		coarseLow[5];
868 	int		firpwr[5];
869 
870 	int		maxSpurImmunityLevel;	/* [0..7] */
871 	int		cycPwrThr1[8];
872 
873 	int		maxFirstepLevel;	/* [0..2] */
874 	int		firstep[3];
875 
876 	uint32_t	ofdmTrigHigh;
877 	uint32_t	ofdmTrigLow;
878 	int32_t		cckTrigHigh;
879 	int32_t		cckTrigLow;
880 	int32_t		rssiThrLow;
881 	int32_t		rssiThrHigh;
882 
883 	int		period;			/* update listen period */
884 } HAL_ANI_PARAMS;
885 
886 extern	HAL_BOOL ath_hal_getdiagstate(struct ath_hal *ah, int request,
887 			const void *args, uint32_t argsize,
888 			void **result, uint32_t *resultsize);
889 
890 /*
891  * Setup a h/w rate table for use.
892  */
893 extern	void ath_hal_setupratetable(struct ath_hal *ah, HAL_RATE_TABLE *rt);
894 
895 /*
896  * Common routine for implementing getChanNoise api.
897  */
898 int16_t	ath_hal_getChanNoise(struct ath_hal *, const struct ieee80211_channel *);
899 
900 /*
901  * Initialization support.
902  */
903 typedef struct {
904 	const uint32_t	*data;
905 	int		rows, cols;
906 } HAL_INI_ARRAY;
907 
908 #define	HAL_INI_INIT(_ia, _data, _cols) do {			\
909 	(_ia)->data = (const uint32_t *)(_data);		\
910 	(_ia)->rows = sizeof(_data) / sizeof((_data)[0]);	\
911 	(_ia)->cols = (_cols);					\
912 } while (0)
913 #define	HAL_INI_VAL(_ia, _r, _c) \
914 	((_ia)->data[((_r)*(_ia)->cols) + (_c)])
915 
916 /*
917  * OS_DELAY() does a PIO READ on the PCI bus which allows
918  * other cards' DMA reads to complete in the middle of our reset.
919  */
920 #define DMA_YIELD(x) do {		\
921 	if ((++(x) % 64) == 0)		\
922 		OS_DELAY(1);		\
923 } while (0)
924 
925 #define HAL_INI_WRITE_ARRAY(ah, regArray, col, regWr) do {             	\
926 	int r;								\
927 	for (r = 0; r < N(regArray); r++) {				\
928 		OS_REG_WRITE(ah, (regArray)[r][0], (regArray)[r][col]);	\
929 		DMA_YIELD(regWr);					\
930 	}								\
931 } while (0)
932 
933 #define HAL_INI_WRITE_BANK(ah, regArray, bankData, regWr) do {		\
934 	int r;								\
935 	for (r = 0; r < N(regArray); r++) {				\
936 		OS_REG_WRITE(ah, (regArray)[r][0], (bankData)[r]);	\
937 		DMA_YIELD(regWr);					\
938 	}								\
939 } while (0)
940 
941 extern	int ath_hal_ini_write(struct ath_hal *ah, const HAL_INI_ARRAY *ia,
942 		int col, int regWr);
943 extern	void ath_hal_ini_bank_setup(uint32_t data[], const HAL_INI_ARRAY *ia,
944 		int col);
945 extern	int ath_hal_ini_bank_write(struct ath_hal *ah, const HAL_INI_ARRAY *ia,
946 		const uint32_t data[], int regWr);
947 
948 #define	CCK_SIFS_TIME		10
949 #define	CCK_PREAMBLE_BITS	144
950 #define	CCK_PLCP_BITS		48
951 
952 #define	OFDM_SIFS_TIME		16
953 #define	OFDM_PREAMBLE_TIME	20
954 #define	OFDM_PLCP_BITS		22
955 #define	OFDM_SYMBOL_TIME	4
956 
957 #define	OFDM_HALF_SIFS_TIME	32
958 #define	OFDM_HALF_PREAMBLE_TIME	40
959 #define	OFDM_HALF_PLCP_BITS	22
960 #define	OFDM_HALF_SYMBOL_TIME	8
961 
962 #define	OFDM_QUARTER_SIFS_TIME 		64
963 #define	OFDM_QUARTER_PREAMBLE_TIME	80
964 #define	OFDM_QUARTER_PLCP_BITS		22
965 #define	OFDM_QUARTER_SYMBOL_TIME	16
966 
967 #define	TURBO_SIFS_TIME		8
968 #define	TURBO_PREAMBLE_TIME	14
969 #define	TURBO_PLCP_BITS		22
970 #define	TURBO_SYMBOL_TIME	4
971 
972 #define	WLAN_CTRL_FRAME_SIZE	(2+2+6+4)	/* ACK+FCS */
973 
974 /* Generic EEPROM board value functions */
975 extern	HAL_BOOL ath_ee_getLowerUpperIndex(uint8_t target, uint8_t *pList,
976 	uint16_t listSize, uint16_t *indexL, uint16_t *indexR);
977 extern	HAL_BOOL ath_ee_FillVpdTable(uint8_t pwrMin, uint8_t pwrMax,
978 	uint8_t *pPwrList, uint8_t *pVpdList, uint16_t numIntercepts,
979 	uint8_t *pRetVpdList);
980 extern	int16_t ath_ee_interpolate(uint16_t target, uint16_t srcLeft,
981 	uint16_t srcRight, int16_t targetLeft, int16_t targetRight);
982 
983 /* Whether 5ghz fast clock is needed */
984 /*
985  * The chipset (Merlin, AR9300/later) should set the capability flag below;
986  * this flag simply says that the hardware can do it, not that the EEPROM
987  * says it can.
988  *
989  * Merlin 2.0/2.1 chips with an EEPROM version > 16 do 5ghz fast clock
990  *   if the relevant eeprom flag is set.
991  * Merlin 2.0/2.1 chips with an EEPROM version <= 16 do 5ghz fast clock
992  *   by default.
993  */
994 #define	IS_5GHZ_FAST_CLOCK_EN(_ah, _c) \
995 	(IEEE80211_IS_CHAN_5GHZ(_c) && \
996 	 AH_PRIVATE((_ah))->ah_caps.halSupportsFastClock5GHz && \
997 	ath_hal_eepromGetFlag((_ah), AR_EEP_FSTCLK_5G))
998 
999 /*
1000  * Fetch the maximum regulatory domain power for the given channel
1001  * in 1/2dBm steps.
1002  */
1003 static inline int
1004 ath_hal_get_twice_max_regpower(struct ath_hal_private *ahp,
1005     const HAL_CHANNEL_INTERNAL *ichan, const struct ieee80211_channel *chan)
1006 {
1007 	struct ath_hal *ah = &ahp->h;
1008 
1009 	if (! chan) {
1010 		ath_hal_printf(ah, "%s: called with chan=NULL!\n", __func__);
1011 		return (0);
1012 	}
1013 	return (chan->ic_maxpower);
1014 }
1015 
1016 /*
1017  * Get the maximum antenna gain allowed, in 1/2dBm steps.
1018  */
1019 static inline int
1020 ath_hal_getantennaallowed(struct ath_hal *ah,
1021     const struct ieee80211_channel *chan)
1022 {
1023 
1024 	if (! chan)
1025 		return (0);
1026 
1027 	return (chan->ic_maxantgain);
1028 }
1029 
1030 /*
1031  * Map the given 2GHz channel to an IEEE number.
1032  */
1033 extern	int ath_hal_mhz2ieee_2ghz(struct ath_hal *, int freq);
1034 
1035 /*
1036  * Clear the channel survey data.
1037  */
1038 extern	void ath_hal_survey_clear(struct ath_hal *ah);
1039 
1040 /*
1041  * Add a sample to the channel survey data.
1042  */
1043 extern	void ath_hal_survey_add_sample(struct ath_hal *ah,
1044 	    HAL_SURVEY_SAMPLE *hs);
1045 
1046 /*
1047  * Chip registration - for modules.
1048  */
1049 extern	int ath_hal_add_chip(struct ath_hal_chip *ahc);
1050 extern	int ath_hal_remove_chip(struct ath_hal_chip *ahc);
1051 extern	int ath_hal_add_rf(struct ath_hal_rf *arf);
1052 extern	int ath_hal_remove_rf(struct ath_hal_rf *arf);
1053 
1054 #endif /* _ATH_AH_INTERAL_H_ */
1055