1 /* 2 * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting 3 * Copyright (c) 2002-2008 Atheros Communications, Inc. 4 * 5 * Permission to use, copy, modify, and/or distribute this software for any 6 * purpose with or without fee is hereby granted, provided that the above 7 * copyright notice and this permission notice appear in all copies. 8 * 9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 16 * 17 * $FreeBSD$ 18 */ 19 #ifndef _ATH_AH_INTERAL_H_ 20 #define _ATH_AH_INTERAL_H_ 21 /* 22 * Atheros Device Hardware Access Layer (HAL). 23 * 24 * Internal definitions. 25 */ 26 #define AH_NULL 0 27 #define AH_MIN(a,b) ((a)<(b)?(a):(b)) 28 #define AH_MAX(a,b) ((a)>(b)?(a):(b)) 29 30 #include <net80211/_ieee80211.h> 31 #include "opt_ah.h" /* needed for AH_SUPPORT_AR5416 */ 32 33 #ifndef AH_SUPPORT_AR5416 34 #define AH_SUPPORT_AR5416 1 35 #endif 36 37 #ifndef NBBY 38 #define NBBY 8 /* number of bits/byte */ 39 #endif 40 41 #ifndef roundup 42 #define roundup(x, y) ((((x)+((y)-1))/(y))*(y)) /* to any y */ 43 #endif 44 #ifndef howmany 45 #define howmany(x, y) (((x)+((y)-1))/(y)) 46 #endif 47 48 #ifndef offsetof 49 #define offsetof(type, field) ((size_t)(&((type *)0)->field)) 50 #endif 51 52 typedef struct { 53 uint16_t start; /* first register */ 54 uint16_t end; /* ending register or zero */ 55 } HAL_REGRANGE; 56 57 typedef struct { 58 uint32_t addr; /* regiser address/offset */ 59 uint32_t value; /* value to write */ 60 } HAL_REGWRITE; 61 62 /* 63 * Transmit power scale factor. 64 * 65 * NB: This is not public because we want to discourage the use of 66 * scaling; folks should use the tx power limit interface. 67 */ 68 typedef enum { 69 HAL_TP_SCALE_MAX = 0, /* no scaling (default) */ 70 HAL_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */ 71 HAL_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */ 72 HAL_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */ 73 HAL_TP_SCALE_MIN = 4, /* min, but still on */ 74 } HAL_TP_SCALE; 75 76 typedef enum { 77 HAL_CAP_RADAR = 0, /* Radar capability */ 78 HAL_CAP_AR = 1, /* AR capability */ 79 } HAL_PHYDIAG_CAPS; 80 81 /* 82 * Enable/disable strong signal fast diversity 83 */ 84 #define HAL_CAP_STRONG_DIV 2 85 86 /* 87 * Each chip or class of chips registers to offer support. 88 */ 89 struct ath_hal_chip { 90 const char *name; 91 const char *(*probe)(uint16_t vendorid, uint16_t devid); 92 struct ath_hal *(*attach)(uint16_t devid, HAL_SOFTC, 93 HAL_BUS_TAG, HAL_BUS_HANDLE, uint16_t *eepromdata, 94 HAL_STATUS *error); 95 }; 96 #ifndef AH_CHIP 97 #define AH_CHIP(_name, _probe, _attach) \ 98 static struct ath_hal_chip _name##_chip = { \ 99 .name = #_name, \ 100 .probe = _probe, \ 101 .attach = _attach \ 102 }; \ 103 OS_DATA_SET(ah_chips, _name##_chip) 104 #endif 105 106 /* 107 * Each RF backend registers to offer support; this is mostly 108 * used by multi-chip 5212 solutions. Single-chip solutions 109 * have a fixed idea about which RF to use. 110 */ 111 struct ath_hal_rf { 112 const char *name; 113 HAL_BOOL (*probe)(struct ath_hal *ah); 114 HAL_BOOL (*attach)(struct ath_hal *ah, HAL_STATUS *ecode); 115 }; 116 #ifndef AH_RF 117 #define AH_RF(_name, _probe, _attach) \ 118 static struct ath_hal_rf _name##_rf = { \ 119 .name = __STRING(_name), \ 120 .probe = _probe, \ 121 .attach = _attach \ 122 }; \ 123 OS_DATA_SET(ah_rfs, _name##_rf) 124 #endif 125 126 struct ath_hal_rf *ath_hal_rfprobe(struct ath_hal *ah, HAL_STATUS *ecode); 127 128 /* 129 * Maximum number of internal channels. Entries are per unique 130 * frequency so this might be need to be increased to handle all 131 * usage cases; typically no more than 32 are really needed but 132 * dynamically allocating the data structures is a bit painful 133 * right now. 134 */ 135 #ifndef AH_MAXCHAN 136 #define AH_MAXCHAN 96 137 #endif 138 139 #define HAL_NF_CAL_HIST_LEN_FULL 5 140 #define HAL_NF_CAL_HIST_LEN_SMALL 1 141 #define HAL_NUM_NF_READINGS 6 /* 3 chains * (ctl + ext) */ 142 #define HAL_NF_LOAD_DELAY 1000 143 144 /* 145 * PER_CHAN doesn't work for now, as it looks like the device layer 146 * has to pre-populate the per-channel list with nominal values. 147 */ 148 //#define ATH_NF_PER_CHAN 1 149 150 typedef struct { 151 u_int8_t curr_index; 152 int8_t invalidNFcount; /* TO DO: REMOVE THIS! */ 153 int16_t priv_nf[HAL_NUM_NF_READINGS]; 154 } HAL_NFCAL_BASE; 155 156 typedef struct { 157 HAL_NFCAL_BASE base; 158 int16_t nf_cal_buffer[HAL_NF_CAL_HIST_LEN_FULL][HAL_NUM_NF_READINGS]; 159 } HAL_NFCAL_HIST_FULL; 160 161 typedef struct { 162 HAL_NFCAL_BASE base; 163 int16_t nf_cal_buffer[HAL_NF_CAL_HIST_LEN_SMALL][HAL_NUM_NF_READINGS]; 164 } HAL_NFCAL_HIST_SMALL; 165 166 #ifdef ATH_NF_PER_CHAN 167 typedef HAL_NFCAL_HIST_FULL HAL_CHAN_NFCAL_HIST; 168 #define AH_HOME_CHAN_NFCAL_HIST(ah, ichan) (ichan ? &ichan->nf_cal_hist: NULL) 169 #else 170 typedef HAL_NFCAL_HIST_SMALL HAL_CHAN_NFCAL_HIST; 171 #define AH_HOME_CHAN_NFCAL_HIST(ah, ichan) (&AH_PRIVATE(ah)->nf_cal_hist) 172 #endif /* ATH_NF_PER_CHAN */ 173 174 /* 175 * Internal per-channel state. These are found 176 * using ic_devdata in the ieee80211_channel. 177 */ 178 typedef struct { 179 uint16_t channel; /* h/w frequency, NB: may be mapped */ 180 uint8_t privFlags; 181 #define CHANNEL_IQVALID 0x01 /* IQ calibration valid */ 182 #define CHANNEL_ANI_INIT 0x02 /* ANI state initialized */ 183 #define CHANNEL_ANI_SETUP 0x04 /* ANI state setup */ 184 #define CHANNEL_MIMO_NF_VALID 0x04 /* Mimo NF values are valid */ 185 uint8_t calValid; /* bitmask of cal types */ 186 int8_t iCoff; 187 int8_t qCoff; 188 int16_t rawNoiseFloor; 189 int16_t noiseFloorAdjust; 190 #ifdef AH_SUPPORT_AR5416 191 int16_t noiseFloorCtl[AH_MAX_CHAINS]; 192 int16_t noiseFloorExt[AH_MAX_CHAINS]; 193 #endif /* AH_SUPPORT_AR5416 */ 194 uint16_t mainSpur; /* cached spur value for this channel */ 195 196 /*XXX TODO: make these part of privFlags */ 197 uint8_t paprd_done:1, /* 1: PAPRD DONE, 0: PAPRD Cal not done */ 198 paprd_table_write_done:1; /* 1: DONE, 0: Cal data write not done */ 199 int one_time_cals_done; 200 HAL_CHAN_NFCAL_HIST nf_cal_hist; 201 } HAL_CHANNEL_INTERNAL; 202 203 /* channel requires noise floor check */ 204 #define CHANNEL_NFCREQUIRED IEEE80211_CHAN_PRIV0 205 206 /* all full-width channels */ 207 #define IEEE80211_CHAN_ALLFULL \ 208 (IEEE80211_CHAN_ALL - (IEEE80211_CHAN_HALF | IEEE80211_CHAN_QUARTER)) 209 #define IEEE80211_CHAN_ALLTURBOFULL \ 210 (IEEE80211_CHAN_ALLTURBO - \ 211 (IEEE80211_CHAN_HALF | IEEE80211_CHAN_QUARTER)) 212 213 typedef struct { 214 uint32_t halChanSpreadSupport : 1, 215 halSleepAfterBeaconBroken : 1, 216 halCompressSupport : 1, 217 halBurstSupport : 1, 218 halFastFramesSupport : 1, 219 halChapTuningSupport : 1, 220 halTurboGSupport : 1, 221 halTurboPrimeSupport : 1, 222 halMicAesCcmSupport : 1, 223 halMicCkipSupport : 1, 224 halMicTkipSupport : 1, 225 halTkipMicTxRxKeySupport : 1, 226 halCipherAesCcmSupport : 1, 227 halCipherCkipSupport : 1, 228 halCipherTkipSupport : 1, 229 halPSPollBroken : 1, 230 halVEOLSupport : 1, 231 halBssIdMaskSupport : 1, 232 halMcastKeySrchSupport : 1, 233 halTsfAddSupport : 1, 234 halChanHalfRate : 1, 235 halChanQuarterRate : 1, 236 halHTSupport : 1, 237 halHTSGI20Support : 1, 238 halRfSilentSupport : 1, 239 halHwPhyCounterSupport : 1, 240 halWowSupport : 1, 241 halWowMatchPatternExact : 1, 242 halAutoSleepSupport : 1, 243 halFastCCSupport : 1, 244 halBtCoexSupport : 1; 245 uint32_t halRxStbcSupport : 1, 246 halTxStbcSupport : 1, 247 halGTTSupport : 1, 248 halCSTSupport : 1, 249 halRifsRxSupport : 1, 250 halRifsTxSupport : 1, 251 hal4AddrAggrSupport : 1, 252 halExtChanDfsSupport : 1, 253 halUseCombinedRadarRssi : 1, 254 halForcePpmSupport : 1, 255 halEnhancedPmSupport : 1, 256 halEnhancedDfsSupport : 1, 257 halMbssidAggrSupport : 1, 258 halBssidMatchSupport : 1, 259 hal4kbSplitTransSupport : 1, 260 halHasRxSelfLinkedTail : 1, 261 halSupportsFastClock5GHz : 1, 262 halHasLongRxDescTsf : 1, 263 halHasBBReadWar : 1, 264 halSerialiseRegWar : 1, 265 halMciSupport : 1, 266 halRxTxAbortSupport : 1, 267 halPaprdEnabled : 1, 268 halHasUapsdSupport : 1, 269 halWpsPushButtonSupport : 1, 270 halBtCoexApsmWar : 1, 271 halGenTimerSupport : 1, 272 halLDPCSupport : 1, 273 halHwBeaconProcSupport : 1, 274 halEnhancedDmaSupport : 1; 275 uint32_t halIsrRacSupport : 1, 276 halApmEnable : 1, 277 halIntrMitigation : 1, 278 hal49GhzSupport : 1, 279 halAntDivCombSupport : 1, 280 halAntDivCombSupportOrg : 1, 281 halRadioRetentionSupport : 1; 282 283 uint32_t halWirelessModes; 284 uint16_t halTotalQueues; 285 uint16_t halKeyCacheSize; 286 uint16_t halLow5GhzChan, halHigh5GhzChan; 287 uint16_t halLow2GhzChan, halHigh2GhzChan; 288 int halTstampPrecision; 289 int halRtsAggrLimit; 290 uint8_t halTxChainMask; 291 uint8_t halRxChainMask; 292 uint8_t halNumGpioPins; 293 uint8_t halNumAntCfg2GHz; 294 uint8_t halNumAntCfg5GHz; 295 uint32_t halIntrMask; 296 uint8_t halTxStreams; 297 uint8_t halRxStreams; 298 HAL_MFP_OPT_T halMfpSupport; 299 300 /* AR9300 HAL porting capabilities */ 301 int hal_paprd_enabled; 302 int hal_pcie_lcr_offset; 303 int hal_pcie_lcr_extsync_en; 304 int halNumTxMaps; 305 int halTxDescLen; 306 int halTxStatusLen; 307 int halRxStatusLen; 308 int halRxHpFifoDepth; 309 int halRxLpFifoDepth; 310 uint32_t halRegCap; /* XXX needed? */ 311 int halNumMRRetries; 312 int hal_ani_poll_interval; 313 int hal_channel_switch_time_usec; 314 } HAL_CAPABILITIES; 315 316 struct regDomain; 317 318 /* 319 * Definitions for ah_flags in ath_hal_private 320 */ 321 #define AH_USE_EEPROM 0x1 322 #define AH_IS_HB63 0x2 323 324 /* 325 * The ``private area'' follows immediately after the ``public area'' 326 * in the data structure returned by ath_hal_attach. Private data are 327 * used by device-independent code such as the regulatory domain support. 328 * In general, code within the HAL should never depend on data in the 329 * public area. Instead any public data needed internally should be 330 * shadowed here. 331 * 332 * When declaring a device-specific ath_hal data structure this structure 333 * is assumed to at the front; e.g. 334 * 335 * struct ath_hal_5212 { 336 * struct ath_hal_private ah_priv; 337 * ... 338 * }; 339 * 340 * It might be better to manage the method pointers in this structure 341 * using an indirect pointer to a read-only data structure but this would 342 * disallow class-style method overriding. 343 */ 344 struct ath_hal_private { 345 struct ath_hal h; /* public area */ 346 347 /* NB: all methods go first to simplify initialization */ 348 HAL_BOOL (*ah_getChannelEdges)(struct ath_hal*, 349 uint16_t channelFlags, 350 uint16_t *lowChannel, uint16_t *highChannel); 351 u_int (*ah_getWirelessModes)(struct ath_hal*); 352 HAL_BOOL (*ah_eepromRead)(struct ath_hal *, u_int off, 353 uint16_t *data); 354 HAL_BOOL (*ah_eepromWrite)(struct ath_hal *, u_int off, 355 uint16_t data); 356 HAL_BOOL (*ah_getChipPowerLimits)(struct ath_hal *, 357 struct ieee80211_channel *); 358 int16_t (*ah_getNfAdjust)(struct ath_hal *, 359 const HAL_CHANNEL_INTERNAL*); 360 void (*ah_getNoiseFloor)(struct ath_hal *, 361 int16_t nfarray[]); 362 363 void *ah_eeprom; /* opaque EEPROM state */ 364 uint16_t ah_eeversion; /* EEPROM version */ 365 void (*ah_eepromDetach)(struct ath_hal *); 366 HAL_STATUS (*ah_eepromGet)(struct ath_hal *, int, void *); 367 HAL_STATUS (*ah_eepromSet)(struct ath_hal *, int, int); 368 uint16_t (*ah_getSpurChan)(struct ath_hal *, int, HAL_BOOL); 369 HAL_BOOL (*ah_eepromDiag)(struct ath_hal *, int request, 370 const void *args, uint32_t argsize, 371 void **result, uint32_t *resultsize); 372 373 /* 374 * Device revision information. 375 */ 376 uint16_t ah_devid; /* PCI device ID */ 377 uint16_t ah_subvendorid; /* PCI subvendor ID */ 378 uint32_t ah_macVersion; /* MAC version id */ 379 uint16_t ah_macRev; /* MAC revision */ 380 uint16_t ah_phyRev; /* PHY revision */ 381 uint16_t ah_analog5GhzRev; /* 2GHz radio revision */ 382 uint16_t ah_analog2GhzRev; /* 5GHz radio revision */ 383 uint32_t ah_flags; /* misc flags */ 384 uint8_t ah_ispcie; /* PCIE, special treatment */ 385 uint8_t ah_devType; /* card type - CB, PCI, PCIe */ 386 387 HAL_OPMODE ah_opmode; /* operating mode from reset */ 388 const struct ieee80211_channel *ah_curchan;/* operating channel */ 389 HAL_CAPABILITIES ah_caps; /* device capabilities */ 390 uint32_t ah_diagreg; /* user-specified AR_DIAG_SW */ 391 int16_t ah_powerLimit; /* tx power cap */ 392 uint16_t ah_maxPowerLevel; /* calculated max tx power */ 393 u_int ah_tpScale; /* tx power scale factor */ 394 uint32_t ah_11nCompat; /* 11n compat controls */ 395 396 /* 397 * State for regulatory domain handling. 398 */ 399 HAL_REG_DOMAIN ah_currentRD; /* EEPROM regulatory domain */ 400 HAL_REG_DOMAIN ah_currentRDext; /* EEPROM extended regdomain flags */ 401 HAL_DFS_DOMAIN ah_dfsDomain; /* current DFS domain */ 402 HAL_CHANNEL_INTERNAL ah_channels[AH_MAXCHAN]; /* private chan state */ 403 u_int ah_nchan; /* valid items in ah_channels */ 404 const struct regDomain *ah_rd2GHz; /* reg state for 2G band */ 405 const struct regDomain *ah_rd5GHz; /* reg state for 5G band */ 406 407 uint8_t ah_coverageClass; /* coverage class */ 408 /* 409 * RF Silent handling; setup according to the EEPROM. 410 */ 411 uint16_t ah_rfsilent; /* GPIO pin + polarity */ 412 HAL_BOOL ah_rfkillEnabled; /* enable/disable RfKill */ 413 /* 414 * Diagnostic support for discriminating HIUERR reports. 415 */ 416 uint32_t ah_fatalState[6]; /* AR_ISR+shadow regs */ 417 int ah_rxornIsFatal; /* how to treat HAL_INT_RXORN */ 418 419 #ifndef ATH_NF_PER_CHAN 420 HAL_NFCAL_HIST_FULL nf_cal_hist; 421 #endif /* ! ATH_NF_PER_CHAN */ 422 }; 423 424 #define AH_PRIVATE(_ah) ((struct ath_hal_private *)(_ah)) 425 426 #define ath_hal_getChannelEdges(_ah, _cf, _lc, _hc) \ 427 AH_PRIVATE(_ah)->ah_getChannelEdges(_ah, _cf, _lc, _hc) 428 #define ath_hal_getWirelessModes(_ah) \ 429 AH_PRIVATE(_ah)->ah_getWirelessModes(_ah) 430 #define ath_hal_eepromRead(_ah, _off, _data) \ 431 AH_PRIVATE(_ah)->ah_eepromRead(_ah, _off, _data) 432 #define ath_hal_eepromWrite(_ah, _off, _data) \ 433 AH_PRIVATE(_ah)->ah_eepromWrite(_ah, _off, _data) 434 #define ath_hal_gpioCfgOutput(_ah, _gpio, _type) \ 435 (_ah)->ah_gpioCfgOutput(_ah, _gpio, _type) 436 #define ath_hal_gpioCfgInput(_ah, _gpio) \ 437 (_ah)->ah_gpioCfgInput(_ah, _gpio) 438 #define ath_hal_gpioGet(_ah, _gpio) \ 439 (_ah)->ah_gpioGet(_ah, _gpio) 440 #define ath_hal_gpioSet(_ah, _gpio, _val) \ 441 (_ah)->ah_gpioSet(_ah, _gpio, _val) 442 #define ath_hal_gpioSetIntr(_ah, _gpio, _ilevel) \ 443 (_ah)->ah_gpioSetIntr(_ah, _gpio, _ilevel) 444 #define ath_hal_getpowerlimits(_ah, _chan) \ 445 AH_PRIVATE(_ah)->ah_getChipPowerLimits(_ah, _chan) 446 #define ath_hal_getNfAdjust(_ah, _c) \ 447 AH_PRIVATE(_ah)->ah_getNfAdjust(_ah, _c) 448 #define ath_hal_getNoiseFloor(_ah, _nfArray) \ 449 AH_PRIVATE(_ah)->ah_getNoiseFloor(_ah, _nfArray) 450 #define ath_hal_configPCIE(_ah, _reset, _poweroff) \ 451 (_ah)->ah_configPCIE(_ah, _reset, _poweroff) 452 #define ath_hal_disablePCIE(_ah) \ 453 (_ah)->ah_disablePCIE(_ah) 454 #define ath_hal_setInterrupts(_ah, _mask) \ 455 (_ah)->ah_setInterrupts(_ah, _mask) 456 457 #define ath_hal_isrfkillenabled(_ah) \ 458 (ath_hal_getcapability(_ah, HAL_CAP_RFSILENT, 1, AH_NULL) == HAL_OK) 459 #define ath_hal_enable_rfkill(_ah, _v) \ 460 ath_hal_setcapability(_ah, HAL_CAP_RFSILENT, 1, _v, AH_NULL) 461 #define ath_hal_hasrfkill_int(_ah) \ 462 (ath_hal_getcapability(_ah, HAL_CAP_RFSILENT, 3, AH_NULL) == HAL_OK) 463 464 #define ath_hal_eepromDetach(_ah) do { \ 465 if (AH_PRIVATE(_ah)->ah_eepromDetach != AH_NULL) \ 466 AH_PRIVATE(_ah)->ah_eepromDetach(_ah); \ 467 } while (0) 468 #define ath_hal_eepromGet(_ah, _param, _val) \ 469 AH_PRIVATE(_ah)->ah_eepromGet(_ah, _param, _val) 470 #define ath_hal_eepromSet(_ah, _param, _val) \ 471 AH_PRIVATE(_ah)->ah_eepromSet(_ah, _param, _val) 472 #define ath_hal_eepromGetFlag(_ah, _param) \ 473 (AH_PRIVATE(_ah)->ah_eepromGet(_ah, _param, AH_NULL) == HAL_OK) 474 #define ath_hal_getSpurChan(_ah, _ix, _is2G) \ 475 AH_PRIVATE(_ah)->ah_getSpurChan(_ah, _ix, _is2G) 476 #define ath_hal_eepromDiag(_ah, _request, _a, _asize, _r, _rsize) \ 477 AH_PRIVATE(_ah)->ah_eepromDiag(_ah, _request, _a, _asize, _r, _rsize) 478 479 #ifndef _NET_IF_IEEE80211_H_ 480 /* 481 * Stuff that would naturally come from _ieee80211.h 482 */ 483 #define IEEE80211_ADDR_LEN 6 484 485 #define IEEE80211_WEP_IVLEN 3 /* 24bit */ 486 #define IEEE80211_WEP_KIDLEN 1 /* 1 octet */ 487 #define IEEE80211_WEP_CRCLEN 4 /* CRC-32 */ 488 489 #define IEEE80211_CRC_LEN 4 490 491 #define IEEE80211_MAX_LEN (2300 + IEEE80211_CRC_LEN + \ 492 (IEEE80211_WEP_IVLEN + IEEE80211_WEP_KIDLEN + IEEE80211_WEP_CRCLEN)) 493 #endif /* _NET_IF_IEEE80211_H_ */ 494 495 #define HAL_TXQ_USE_LOCKOUT_BKOFF_DIS 0x00000001 496 497 #define INIT_AIFS 2 498 #define INIT_CWMIN 15 499 #define INIT_CWMIN_11B 31 500 #define INIT_CWMAX 1023 501 #define INIT_SH_RETRY 10 502 #define INIT_LG_RETRY 10 503 #define INIT_SSH_RETRY 32 504 #define INIT_SLG_RETRY 32 505 506 typedef struct { 507 uint32_t tqi_ver; /* HAL TXQ verson */ 508 HAL_TX_QUEUE tqi_type; /* hw queue type*/ 509 HAL_TX_QUEUE_SUBTYPE tqi_subtype; /* queue subtype, if applicable */ 510 HAL_TX_QUEUE_FLAGS tqi_qflags; /* queue flags */ 511 uint32_t tqi_priority; 512 uint32_t tqi_aifs; /* aifs */ 513 uint32_t tqi_cwmin; /* cwMin */ 514 uint32_t tqi_cwmax; /* cwMax */ 515 uint16_t tqi_shretry; /* frame short retry limit */ 516 uint16_t tqi_lgretry; /* frame long retry limit */ 517 uint32_t tqi_cbrPeriod; 518 uint32_t tqi_cbrOverflowLimit; 519 uint32_t tqi_burstTime; 520 uint32_t tqi_readyTime; 521 uint32_t tqi_physCompBuf; 522 uint32_t tqi_intFlags; /* flags for internal use */ 523 } HAL_TX_QUEUE_INFO; 524 525 extern HAL_BOOL ath_hal_setTxQProps(struct ath_hal *ah, 526 HAL_TX_QUEUE_INFO *qi, const HAL_TXQ_INFO *qInfo); 527 extern HAL_BOOL ath_hal_getTxQProps(struct ath_hal *ah, 528 HAL_TXQ_INFO *qInfo, const HAL_TX_QUEUE_INFO *qi); 529 530 #define HAL_SPUR_VAL_MASK 0x3FFF 531 #define HAL_SPUR_CHAN_WIDTH 87 532 #define HAL_BIN_WIDTH_BASE_100HZ 3125 533 #define HAL_BIN_WIDTH_TURBO_100HZ 6250 534 #define HAL_MAX_BINS_ALLOWED 28 535 536 #define IS_CHAN_5GHZ(_c) ((_c)->channel > 4900) 537 #define IS_CHAN_2GHZ(_c) (!IS_CHAN_5GHZ(_c)) 538 539 #define IS_CHAN_IN_PUBLIC_SAFETY_BAND(_c) ((_c) > 4940 && (_c) < 4990) 540 541 /* 542 * Deduce if the host cpu has big- or litt-endian byte order. 543 */ 544 static __inline__ int 545 isBigEndian(void) 546 { 547 union { 548 int32_t i; 549 char c[4]; 550 } u; 551 u.i = 1; 552 return (u.c[0] == 0); 553 } 554 555 /* unalligned little endian access */ 556 #define LE_READ_2(p) \ 557 ((uint16_t) \ 558 ((((const uint8_t *)(p))[0] ) | (((const uint8_t *)(p))[1]<< 8))) 559 #define LE_READ_4(p) \ 560 ((uint32_t) \ 561 ((((const uint8_t *)(p))[0] ) | (((const uint8_t *)(p))[1]<< 8) |\ 562 (((const uint8_t *)(p))[2]<<16) | (((const uint8_t *)(p))[3]<<24))) 563 564 /* 565 * Register manipulation macros that expect bit field defines 566 * to follow the convention that an _S suffix is appended for 567 * a shift count, while the field mask has no suffix. 568 */ 569 #define SM(_v, _f) (((_v) << _f##_S) & (_f)) 570 #define MS(_v, _f) (((_v) & (_f)) >> _f##_S) 571 #define OS_REG_RMW(_a, _r, _set, _clr) \ 572 OS_REG_WRITE(_a, _r, (OS_REG_READ(_a, _r) & ~(_clr)) | (_set)) 573 #define OS_REG_RMW_FIELD(_a, _r, _f, _v) \ 574 OS_REG_WRITE(_a, _r, \ 575 (OS_REG_READ(_a, _r) &~ (_f)) | (((_v) << _f##_S) & (_f))) 576 #define OS_REG_SET_BIT(_a, _r, _f) \ 577 OS_REG_WRITE(_a, _r, OS_REG_READ(_a, _r) | (_f)) 578 #define OS_REG_CLR_BIT(_a, _r, _f) \ 579 OS_REG_WRITE(_a, _r, OS_REG_READ(_a, _r) &~ (_f)) 580 #define OS_REG_IS_BIT_SET(_a, _r, _f) \ 581 ((OS_REG_READ(_a, _r) & (_f)) != 0) 582 #define OS_REG_RMW_FIELD_ALT(_a, _r, _f, _v) \ 583 OS_REG_WRITE(_a, _r, \ 584 (OS_REG_READ(_a, _r) &~(_f<<_f##_S)) | \ 585 (((_v) << _f##_S) & (_f<<_f##_S))) 586 #define OS_REG_READ_FIELD(_a, _r, _f) \ 587 (((OS_REG_READ(_a, _r) & _f) >> _f##_S)) 588 #define OS_REG_READ_FIELD_ALT(_a, _r, _f) \ 589 ((OS_REG_READ(_a, _r) >> (_f##_S))&(_f)) 590 591 /* Analog register writes may require a delay between each one (eg Merlin?) */ 592 #define OS_A_REG_RMW_FIELD(_a, _r, _f, _v) \ 593 do { OS_REG_WRITE(_a, _r, (OS_REG_READ(_a, _r) &~ (_f)) | \ 594 (((_v) << _f##_S) & (_f))) ; OS_DELAY(100); } while (0) 595 #define OS_A_REG_WRITE(_a, _r, _v) \ 596 do { OS_REG_WRITE(_a, _r, _v); OS_DELAY(100); } while (0) 597 598 /* wait for the register contents to have the specified value */ 599 extern HAL_BOOL ath_hal_wait(struct ath_hal *, u_int reg, 600 uint32_t mask, uint32_t val); 601 extern HAL_BOOL ath_hal_waitfor(struct ath_hal *, u_int reg, 602 uint32_t mask, uint32_t val, uint32_t timeout); 603 604 /* return the first n bits in val reversed */ 605 extern uint32_t ath_hal_reverseBits(uint32_t val, uint32_t n); 606 607 /* printf interfaces */ 608 extern void ath_hal_printf(struct ath_hal *, const char*, ...) 609 __printflike(2,3); 610 extern void ath_hal_vprintf(struct ath_hal *, const char*, __va_list) 611 __printflike(2, 0); 612 extern const char* ath_hal_ether_sprintf(const uint8_t *mac); 613 614 /* allocate and free memory */ 615 extern void *ath_hal_malloc(size_t); 616 extern void ath_hal_free(void *); 617 618 /* common debugging interfaces */ 619 #ifdef AH_DEBUG 620 #include "ah_debug.h" 621 extern int ath_hal_debug; /* Global debug flags */ 622 623 /* 624 * The typecast is purely because some callers will pass in 625 * AH_NULL directly rather than using a NULL ath_hal pointer. 626 */ 627 #define HALDEBUG(_ah, __m, ...) \ 628 do { \ 629 if ((__m) == HAL_DEBUG_UNMASKABLE || \ 630 ath_hal_debug & (__m) || \ 631 ((_ah) != NULL && \ 632 ((struct ath_hal *) (_ah))->ah_config.ah_debug & (__m))) { \ 633 DO_HALDEBUG((_ah), (__m), __VA_ARGS__); \ 634 } \ 635 } while(0); 636 637 extern void DO_HALDEBUG(struct ath_hal *ah, u_int mask, const char* fmt, ...) 638 __printflike(3,4); 639 #else 640 #define HALDEBUG(_ah, __m, ...) 641 #endif /* AH_DEBUG */ 642 643 /* 644 * Register logging definitions shared with ardecode. 645 */ 646 #include "ah_decode.h" 647 648 /* 649 * Common assertion interface. Note: it is a bad idea to generate 650 * an assertion failure for any recoverable event. Instead catch 651 * the violation and, if possible, fix it up or recover from it; either 652 * with an error return value or a diagnostic messages. System software 653 * does not panic unless the situation is hopeless. 654 */ 655 #ifdef AH_ASSERT 656 extern void ath_hal_assert_failed(const char* filename, 657 int lineno, const char* msg); 658 659 #define HALASSERT(_x) do { \ 660 if (!(_x)) { \ 661 ath_hal_assert_failed(__FILE__, __LINE__, #_x); \ 662 } \ 663 } while (0) 664 #else 665 #define HALASSERT(_x) 666 #endif /* AH_ASSERT */ 667 668 /* 669 * Regulatory domain support. 670 */ 671 672 /* 673 * Return the max allowed antenna gain and apply any regulatory 674 * domain specific changes. 675 */ 676 u_int ath_hal_getantennareduction(struct ath_hal *ah, 677 const struct ieee80211_channel *chan, u_int twiceGain); 678 679 /* 680 * Return the test group for the specific channel based on 681 * the current regulatory setup. 682 */ 683 u_int ath_hal_getctl(struct ath_hal *, const struct ieee80211_channel *); 684 685 /* 686 * Map a public channel definition to the corresponding 687 * internal data structure. This implicitly specifies 688 * whether or not the specified channel is ok to use 689 * based on the current regulatory domain constraints. 690 */ 691 #ifndef AH_DEBUG 692 static OS_INLINE HAL_CHANNEL_INTERNAL * 693 ath_hal_checkchannel(struct ath_hal *ah, const struct ieee80211_channel *c) 694 { 695 HAL_CHANNEL_INTERNAL *cc; 696 697 HALASSERT(c->ic_devdata < AH_PRIVATE(ah)->ah_nchan); 698 cc = &AH_PRIVATE(ah)->ah_channels[c->ic_devdata]; 699 HALASSERT(c->ic_freq == cc->channel || IEEE80211_IS_CHAN_GSM(c)); 700 return cc; 701 } 702 #else 703 /* NB: non-inline version that checks state */ 704 HAL_CHANNEL_INTERNAL *ath_hal_checkchannel(struct ath_hal *, 705 const struct ieee80211_channel *); 706 #endif /* AH_DEBUG */ 707 708 /* 709 * Return the h/w frequency for a channel. This may be 710 * different from ic_freq if this is a GSM device that 711 * takes 2.4GHz frequencies and down-converts them. 712 */ 713 static OS_INLINE uint16_t 714 ath_hal_gethwchannel(struct ath_hal *ah, const struct ieee80211_channel *c) 715 { 716 return ath_hal_checkchannel(ah, c)->channel; 717 } 718 719 /* 720 * Convert between microseconds and core system clocks. 721 */ 722 extern u_int ath_hal_mac_clks(struct ath_hal *ah, u_int usecs); 723 extern u_int ath_hal_mac_usec(struct ath_hal *ah, u_int clks); 724 725 /* 726 * Generic get/set capability support. Each chip overrides 727 * this routine to support chip-specific capabilities. 728 */ 729 extern HAL_STATUS ath_hal_getcapability(struct ath_hal *ah, 730 HAL_CAPABILITY_TYPE type, uint32_t capability, 731 uint32_t *result); 732 extern HAL_BOOL ath_hal_setcapability(struct ath_hal *ah, 733 HAL_CAPABILITY_TYPE type, uint32_t capability, 734 uint32_t setting, HAL_STATUS *status); 735 736 /* The diagnostic codes used to be internally defined here -adrian */ 737 #include "ah_diagcodes.h" 738 739 /* 740 * The AR5416 and later HALs have MAC and baseband hang checking. 741 */ 742 typedef struct { 743 uint32_t hang_reg_offset; 744 uint32_t hang_val; 745 uint32_t hang_mask; 746 uint32_t hang_offset; 747 } hal_hw_hang_check_t; 748 749 typedef struct { 750 uint32_t dma_dbg_3; 751 uint32_t dma_dbg_4; 752 uint32_t dma_dbg_5; 753 uint32_t dma_dbg_6; 754 } mac_dbg_regs_t; 755 756 typedef enum { 757 dcu_chain_state = 0x1, 758 dcu_complete_state = 0x2, 759 qcu_state = 0x4, 760 qcu_fsp_ok = 0x8, 761 qcu_fsp_state = 0x10, 762 qcu_stitch_state = 0x20, 763 qcu_fetch_state = 0x40, 764 qcu_complete_state = 0x80 765 } hal_mac_hangs_t; 766 767 typedef struct { 768 int states; 769 uint8_t dcu_chain_state; 770 uint8_t dcu_complete_state; 771 uint8_t qcu_state; 772 uint8_t qcu_fsp_ok; 773 uint8_t qcu_fsp_state; 774 uint8_t qcu_stitch_state; 775 uint8_t qcu_fetch_state; 776 uint8_t qcu_complete_state; 777 } hal_mac_hang_check_t; 778 779 enum { 780 HAL_BB_HANG_DFS = 0x0001, 781 HAL_BB_HANG_RIFS = 0x0002, 782 HAL_BB_HANG_RX_CLEAR = 0x0004, 783 HAL_BB_HANG_UNKNOWN = 0x0080, 784 785 HAL_MAC_HANG_SIG1 = 0x0100, 786 HAL_MAC_HANG_SIG2 = 0x0200, 787 HAL_MAC_HANG_UNKNOWN = 0x8000, 788 789 HAL_BB_HANGS = HAL_BB_HANG_DFS 790 | HAL_BB_HANG_RIFS 791 | HAL_BB_HANG_RX_CLEAR 792 | HAL_BB_HANG_UNKNOWN, 793 HAL_MAC_HANGS = HAL_MAC_HANG_SIG1 794 | HAL_MAC_HANG_SIG2 795 | HAL_MAC_HANG_UNKNOWN, 796 }; 797 798 /* Merge these with above */ 799 typedef enum hal_hw_hangs { 800 HAL_DFS_BB_HANG_WAR = 0x1, 801 HAL_RIFS_BB_HANG_WAR = 0x2, 802 HAL_RX_STUCK_LOW_BB_HANG_WAR = 0x4, 803 HAL_MAC_HANG_WAR = 0x8, 804 HAL_PHYRESTART_CLR_WAR = 0x10, 805 HAL_MAC_HANG_DETECTED = 0x40000000, 806 HAL_BB_HANG_DETECTED = 0x80000000 807 } hal_hw_hangs_t; 808 809 /* 810 * Device revision information. 811 */ 812 typedef struct { 813 uint16_t ah_devid; /* PCI device ID */ 814 uint16_t ah_subvendorid; /* PCI subvendor ID */ 815 uint32_t ah_macVersion; /* MAC version id */ 816 uint16_t ah_macRev; /* MAC revision */ 817 uint16_t ah_phyRev; /* PHY revision */ 818 uint16_t ah_analog5GhzRev; /* 2GHz radio revision */ 819 uint16_t ah_analog2GhzRev; /* 5GHz radio revision */ 820 } HAL_REVS; 821 822 /* 823 * Argument payload for HAL_DIAG_SETKEY. 824 */ 825 typedef struct { 826 HAL_KEYVAL dk_keyval; 827 uint16_t dk_keyix; /* key index */ 828 uint8_t dk_mac[IEEE80211_ADDR_LEN]; 829 int dk_xor; /* XOR key data */ 830 } HAL_DIAG_KEYVAL; 831 832 /* 833 * Argument payload for HAL_DIAG_EEWRITE. 834 */ 835 typedef struct { 836 uint16_t ee_off; /* eeprom offset */ 837 uint16_t ee_data; /* write data */ 838 } HAL_DIAG_EEVAL; 839 840 841 typedef struct { 842 u_int offset; /* reg offset */ 843 uint32_t val; /* reg value */ 844 } HAL_DIAG_REGVAL; 845 846 /* 847 * 11n compatibility tweaks. 848 */ 849 #define HAL_DIAG_11N_SERVICES 0x00000003 850 #define HAL_DIAG_11N_SERVICES_S 0 851 #define HAL_DIAG_11N_TXSTOMP 0x0000000c 852 #define HAL_DIAG_11N_TXSTOMP_S 2 853 854 typedef struct { 855 int maxNoiseImmunityLevel; /* [0..4] */ 856 int totalSizeDesired[5]; 857 int coarseHigh[5]; 858 int coarseLow[5]; 859 int firpwr[5]; 860 861 int maxSpurImmunityLevel; /* [0..7] */ 862 int cycPwrThr1[8]; 863 864 int maxFirstepLevel; /* [0..2] */ 865 int firstep[3]; 866 867 uint32_t ofdmTrigHigh; 868 uint32_t ofdmTrigLow; 869 int32_t cckTrigHigh; 870 int32_t cckTrigLow; 871 int32_t rssiThrLow; 872 int32_t rssiThrHigh; 873 874 int period; /* update listen period */ 875 } HAL_ANI_PARAMS; 876 877 extern HAL_BOOL ath_hal_getdiagstate(struct ath_hal *ah, int request, 878 const void *args, uint32_t argsize, 879 void **result, uint32_t *resultsize); 880 881 /* 882 * Setup a h/w rate table for use. 883 */ 884 extern void ath_hal_setupratetable(struct ath_hal *ah, HAL_RATE_TABLE *rt); 885 886 /* 887 * Common routine for implementing getChanNoise api. 888 */ 889 int16_t ath_hal_getChanNoise(struct ath_hal *, const struct ieee80211_channel *); 890 891 /* 892 * Initialization support. 893 */ 894 typedef struct { 895 const uint32_t *data; 896 int rows, cols; 897 } HAL_INI_ARRAY; 898 899 #define HAL_INI_INIT(_ia, _data, _cols) do { \ 900 (_ia)->data = (const uint32_t *)(_data); \ 901 (_ia)->rows = sizeof(_data) / sizeof((_data)[0]); \ 902 (_ia)->cols = (_cols); \ 903 } while (0) 904 #define HAL_INI_VAL(_ia, _r, _c) \ 905 ((_ia)->data[((_r)*(_ia)->cols) + (_c)]) 906 907 /* 908 * OS_DELAY() does a PIO READ on the PCI bus which allows 909 * other cards' DMA reads to complete in the middle of our reset. 910 */ 911 #define DMA_YIELD(x) do { \ 912 if ((++(x) % 64) == 0) \ 913 OS_DELAY(1); \ 914 } while (0) 915 916 #define HAL_INI_WRITE_ARRAY(ah, regArray, col, regWr) do { \ 917 int r; \ 918 for (r = 0; r < N(regArray); r++) { \ 919 OS_REG_WRITE(ah, (regArray)[r][0], (regArray)[r][col]); \ 920 DMA_YIELD(regWr); \ 921 } \ 922 } while (0) 923 924 #define HAL_INI_WRITE_BANK(ah, regArray, bankData, regWr) do { \ 925 int r; \ 926 for (r = 0; r < N(regArray); r++) { \ 927 OS_REG_WRITE(ah, (regArray)[r][0], (bankData)[r]); \ 928 DMA_YIELD(regWr); \ 929 } \ 930 } while (0) 931 932 extern int ath_hal_ini_write(struct ath_hal *ah, const HAL_INI_ARRAY *ia, 933 int col, int regWr); 934 extern void ath_hal_ini_bank_setup(uint32_t data[], const HAL_INI_ARRAY *ia, 935 int col); 936 extern int ath_hal_ini_bank_write(struct ath_hal *ah, const HAL_INI_ARRAY *ia, 937 const uint32_t data[], int regWr); 938 939 #define CCK_SIFS_TIME 10 940 #define CCK_PREAMBLE_BITS 144 941 #define CCK_PLCP_BITS 48 942 943 #define OFDM_SIFS_TIME 16 944 #define OFDM_PREAMBLE_TIME 20 945 #define OFDM_PLCP_BITS 22 946 #define OFDM_SYMBOL_TIME 4 947 948 #define OFDM_HALF_SIFS_TIME 32 949 #define OFDM_HALF_PREAMBLE_TIME 40 950 #define OFDM_HALF_PLCP_BITS 22 951 #define OFDM_HALF_SYMBOL_TIME 8 952 953 #define OFDM_QUARTER_SIFS_TIME 64 954 #define OFDM_QUARTER_PREAMBLE_TIME 80 955 #define OFDM_QUARTER_PLCP_BITS 22 956 #define OFDM_QUARTER_SYMBOL_TIME 16 957 958 #define TURBO_SIFS_TIME 8 959 #define TURBO_PREAMBLE_TIME 14 960 #define TURBO_PLCP_BITS 22 961 #define TURBO_SYMBOL_TIME 4 962 963 #define WLAN_CTRL_FRAME_SIZE (2+2+6+4) /* ACK+FCS */ 964 965 /* Generic EEPROM board value functions */ 966 extern HAL_BOOL ath_ee_getLowerUpperIndex(uint8_t target, uint8_t *pList, 967 uint16_t listSize, uint16_t *indexL, uint16_t *indexR); 968 extern HAL_BOOL ath_ee_FillVpdTable(uint8_t pwrMin, uint8_t pwrMax, 969 uint8_t *pPwrList, uint8_t *pVpdList, uint16_t numIntercepts, 970 uint8_t *pRetVpdList); 971 extern int16_t ath_ee_interpolate(uint16_t target, uint16_t srcLeft, 972 uint16_t srcRight, int16_t targetLeft, int16_t targetRight); 973 974 /* Whether 5ghz fast clock is needed */ 975 /* 976 * The chipset (Merlin, AR9300/later) should set the capability flag below; 977 * this flag simply says that the hardware can do it, not that the EEPROM 978 * says it can. 979 * 980 * Merlin 2.0/2.1 chips with an EEPROM version > 16 do 5ghz fast clock 981 * if the relevant eeprom flag is set. 982 * Merlin 2.0/2.1 chips with an EEPROM version <= 16 do 5ghz fast clock 983 * by default. 984 */ 985 #define IS_5GHZ_FAST_CLOCK_EN(_ah, _c) \ 986 (IEEE80211_IS_CHAN_5GHZ(_c) && \ 987 AH_PRIVATE((_ah))->ah_caps.halSupportsFastClock5GHz && \ 988 ath_hal_eepromGetFlag((_ah), AR_EEP_FSTCLK_5G)) 989 990 /* 991 * Fetch the maximum regulatory domain power for the given channel 992 * in 1/2dBm steps. 993 */ 994 static inline int 995 ath_hal_get_twice_max_regpower(struct ath_hal_private *ahp, 996 const HAL_CHANNEL_INTERNAL *ichan, const struct ieee80211_channel *chan) 997 { 998 struct ath_hal *ah = &ahp->h; 999 1000 if (! chan) { 1001 ath_hal_printf(ah, "%s: called with chan=NULL!\n", __func__); 1002 return (0); 1003 } 1004 return (chan->ic_maxpower); 1005 } 1006 1007 /* 1008 * Get the maximum antenna gain allowed, in 1/2dBm steps. 1009 */ 1010 static inline int 1011 ath_hal_getantennaallowed(struct ath_hal *ah, 1012 const struct ieee80211_channel *chan) 1013 { 1014 1015 if (! chan) 1016 return (0); 1017 1018 return (chan->ic_maxantgain); 1019 } 1020 1021 1022 #endif /* _ATH_AH_INTERAL_H_ */ 1023