xref: /freebsd/sys/dev/ath/ath_hal/ah_internal.h (revision 7cd2dcf07629713e5a3d60472cfe4701b705a167)
1 /*
2  * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
3  * Copyright (c) 2002-2008 Atheros Communications, Inc.
4  *
5  * Permission to use, copy, modify, and/or distribute this software for any
6  * purpose with or without fee is hereby granted, provided that the above
7  * copyright notice and this permission notice appear in all copies.
8  *
9  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16  *
17  * $FreeBSD$
18  */
19 #ifndef _ATH_AH_INTERAL_H_
20 #define _ATH_AH_INTERAL_H_
21 /*
22  * Atheros Device Hardware Access Layer (HAL).
23  *
24  * Internal definitions.
25  */
26 #define	AH_NULL	0
27 #define	AH_MIN(a,b)	((a)<(b)?(a):(b))
28 #define	AH_MAX(a,b)	((a)>(b)?(a):(b))
29 
30 #include <net80211/_ieee80211.h>
31 #include "opt_ah.h"			/* needed for AH_SUPPORT_AR5416 */
32 
33 #ifndef	AH_SUPPORT_AR5416
34 #define	AH_SUPPORT_AR5416	1
35 #endif
36 
37 #ifndef NBBY
38 #define	NBBY	8			/* number of bits/byte */
39 #endif
40 
41 #ifndef roundup
42 #define	roundup(x, y)	((((x)+((y)-1))/(y))*(y))  /* to any y */
43 #endif
44 #ifndef howmany
45 #define	howmany(x, y)	(((x)+((y)-1))/(y))
46 #endif
47 
48 #ifndef offsetof
49 #define	offsetof(type, field)	((size_t)(&((type *)0)->field))
50 #endif
51 
52 typedef struct {
53 	uint16_t	start;		/* first register */
54 	uint16_t	end;		/* ending register or zero */
55 } HAL_REGRANGE;
56 
57 typedef struct {
58 	uint32_t	addr;		/* regiser address/offset */
59 	uint32_t	value;		/* value to write */
60 } HAL_REGWRITE;
61 
62 /*
63  * Transmit power scale factor.
64  *
65  * NB: This is not public because we want to discourage the use of
66  *     scaling; folks should use the tx power limit interface.
67  */
68 typedef enum {
69 	HAL_TP_SCALE_MAX	= 0,		/* no scaling (default) */
70 	HAL_TP_SCALE_50		= 1,		/* 50% of max (-3 dBm) */
71 	HAL_TP_SCALE_25		= 2,		/* 25% of max (-6 dBm) */
72 	HAL_TP_SCALE_12		= 3,		/* 12% of max (-9 dBm) */
73 	HAL_TP_SCALE_MIN	= 4,		/* min, but still on */
74 } HAL_TP_SCALE;
75 
76 typedef enum {
77  	HAL_CAP_RADAR		= 0,		/* Radar capability */
78  	HAL_CAP_AR		= 1,		/* AR capability */
79 } HAL_PHYDIAG_CAPS;
80 
81 /*
82  * Enable/disable strong signal fast diversity
83  */
84 #define	HAL_CAP_STRONG_DIV		2
85 
86 /*
87  * Each chip or class of chips registers to offer support.
88  */
89 struct ath_hal_chip {
90 	const char	*name;
91 	const char	*(*probe)(uint16_t vendorid, uint16_t devid);
92 	struct ath_hal	*(*attach)(uint16_t devid, HAL_SOFTC,
93 			    HAL_BUS_TAG, HAL_BUS_HANDLE, uint16_t *eepromdata,
94 			    HAL_STATUS *error);
95 };
96 #ifndef AH_CHIP
97 #define	AH_CHIP(_name, _probe, _attach)				\
98 static struct ath_hal_chip _name##_chip = {			\
99 	.name		= #_name,				\
100 	.probe		= _probe,				\
101 	.attach		= _attach				\
102 };								\
103 OS_DATA_SET(ah_chips, _name##_chip)
104 #endif
105 
106 /*
107  * Each RF backend registers to offer support; this is mostly
108  * used by multi-chip 5212 solutions.  Single-chip solutions
109  * have a fixed idea about which RF to use.
110  */
111 struct ath_hal_rf {
112 	const char	*name;
113 	HAL_BOOL	(*probe)(struct ath_hal *ah);
114 	HAL_BOOL	(*attach)(struct ath_hal *ah, HAL_STATUS *ecode);
115 };
116 #ifndef AH_RF
117 #define	AH_RF(_name, _probe, _attach)				\
118 static struct ath_hal_rf _name##_rf = {				\
119 	.name		= __STRING(_name),			\
120 	.probe		= _probe,				\
121 	.attach		= _attach				\
122 };								\
123 OS_DATA_SET(ah_rfs, _name##_rf)
124 #endif
125 
126 struct ath_hal_rf *ath_hal_rfprobe(struct ath_hal *ah, HAL_STATUS *ecode);
127 
128 /*
129  * Maximum number of internal channels.  Entries are per unique
130  * frequency so this might be need to be increased to handle all
131  * usage cases; typically no more than 32 are really needed but
132  * dynamically allocating the data structures is a bit painful
133  * right now.
134  */
135 #ifndef AH_MAXCHAN
136 #define	AH_MAXCHAN	96
137 #endif
138 
139 #define	HAL_NF_CAL_HIST_LEN_FULL	5
140 #define	HAL_NF_CAL_HIST_LEN_SMALL	1
141 #define	HAL_NUM_NF_READINGS		6	/* 3 chains * (ctl + ext) */
142 #define	HAL_NF_LOAD_DELAY		1000
143 
144 /*
145  * PER_CHAN doesn't work for now, as it looks like the device layer
146  * has to pre-populate the per-channel list with nominal values.
147  */
148 //#define	ATH_NF_PER_CHAN		1
149 
150 typedef struct {
151     u_int8_t    curr_index;
152     int8_t      invalidNFcount; /* TO DO: REMOVE THIS! */
153     int16_t     priv_nf[HAL_NUM_NF_READINGS];
154 } HAL_NFCAL_BASE;
155 
156 typedef struct {
157     HAL_NFCAL_BASE base;
158     int16_t     nf_cal_buffer[HAL_NF_CAL_HIST_LEN_FULL][HAL_NUM_NF_READINGS];
159 } HAL_NFCAL_HIST_FULL;
160 
161 typedef struct {
162     HAL_NFCAL_BASE base;
163     int16_t     nf_cal_buffer[HAL_NF_CAL_HIST_LEN_SMALL][HAL_NUM_NF_READINGS];
164 } HAL_NFCAL_HIST_SMALL;
165 
166 #ifdef	ATH_NF_PER_CHAN
167 typedef HAL_NFCAL_HIST_FULL HAL_CHAN_NFCAL_HIST;
168 #define	AH_HOME_CHAN_NFCAL_HIST(ah, ichan) (ichan ? &ichan->nf_cal_hist: NULL)
169 #else
170 typedef HAL_NFCAL_HIST_SMALL HAL_CHAN_NFCAL_HIST;
171 #define	AH_HOME_CHAN_NFCAL_HIST(ah, ichan) (&AH_PRIVATE(ah)->nf_cal_hist)
172 #endif	/* ATH_NF_PER_CHAN */
173 
174 /*
175  * Internal per-channel state.  These are found
176  * using ic_devdata in the ieee80211_channel.
177  */
178 typedef struct {
179 	uint16_t	channel;	/* h/w frequency, NB: may be mapped */
180 	uint8_t		privFlags;
181 #define	CHANNEL_IQVALID		0x01	/* IQ calibration valid */
182 #define	CHANNEL_ANI_INIT	0x02	/* ANI state initialized */
183 #define	CHANNEL_ANI_SETUP	0x04	/* ANI state setup */
184 #define	CHANNEL_MIMO_NF_VALID	0x04	/* Mimo NF values are valid */
185 	uint8_t		calValid;	/* bitmask of cal types */
186 	int8_t		iCoff;
187 	int8_t		qCoff;
188 	int16_t		rawNoiseFloor;
189 	int16_t		noiseFloorAdjust;
190 #ifdef	AH_SUPPORT_AR5416
191 	int16_t		noiseFloorCtl[AH_MAX_CHAINS];
192 	int16_t		noiseFloorExt[AH_MAX_CHAINS];
193 #endif	/* AH_SUPPORT_AR5416 */
194 	uint16_t	mainSpur;	/* cached spur value for this channel */
195 
196 	/*XXX TODO: make these part of privFlags */
197 	uint8_t  paprd_done:1,           /* 1: PAPRD DONE, 0: PAPRD Cal not done */
198 	       paprd_table_write_done:1; /* 1: DONE, 0: Cal data write not done */
199 	int		one_time_cals_done;
200 	HAL_CHAN_NFCAL_HIST nf_cal_hist;
201 } HAL_CHANNEL_INTERNAL;
202 
203 /* channel requires noise floor check */
204 #define	CHANNEL_NFCREQUIRED	IEEE80211_CHAN_PRIV0
205 
206 /* all full-width channels */
207 #define	IEEE80211_CHAN_ALLFULL \
208 	(IEEE80211_CHAN_ALL - (IEEE80211_CHAN_HALF | IEEE80211_CHAN_QUARTER))
209 #define	IEEE80211_CHAN_ALLTURBOFULL \
210 	(IEEE80211_CHAN_ALLTURBO - \
211 	 (IEEE80211_CHAN_HALF | IEEE80211_CHAN_QUARTER))
212 
213 typedef struct {
214 	uint32_t	halChanSpreadSupport 		: 1,
215 			halSleepAfterBeaconBroken	: 1,
216 			halCompressSupport		: 1,
217 			halBurstSupport			: 1,
218 			halFastFramesSupport		: 1,
219 			halChapTuningSupport		: 1,
220 			halTurboGSupport		: 1,
221 			halTurboPrimeSupport		: 1,
222 			halMicAesCcmSupport		: 1,
223 			halMicCkipSupport		: 1,
224 			halMicTkipSupport		: 1,
225 			halTkipMicTxRxKeySupport	: 1,
226 			halCipherAesCcmSupport		: 1,
227 			halCipherCkipSupport		: 1,
228 			halCipherTkipSupport		: 1,
229 			halPSPollBroken			: 1,
230 			halVEOLSupport			: 1,
231 			halBssIdMaskSupport		: 1,
232 			halMcastKeySrchSupport		: 1,
233 			halTsfAddSupport		: 1,
234 			halChanHalfRate			: 1,
235 			halChanQuarterRate		: 1,
236 			halHTSupport			: 1,
237 			halHTSGI20Support		: 1,
238 			halRfSilentSupport		: 1,
239 			halHwPhyCounterSupport		: 1,
240 			halWowSupport			: 1,
241 			halWowMatchPatternExact		: 1,
242 			halAutoSleepSupport		: 1,
243 			halFastCCSupport		: 1,
244 			halBtCoexSupport		: 1;
245 	uint32_t	halRxStbcSupport		: 1,
246 			halTxStbcSupport		: 1,
247 			halGTTSupport			: 1,
248 			halCSTSupport			: 1,
249 			halRifsRxSupport		: 1,
250 			halRifsTxSupport		: 1,
251 			hal4AddrAggrSupport		: 1,
252 			halExtChanDfsSupport		: 1,
253 			halUseCombinedRadarRssi		: 1,
254 			halForcePpmSupport		: 1,
255 			halEnhancedPmSupport		: 1,
256 			halEnhancedDfsSupport		: 1,
257 			halMbssidAggrSupport		: 1,
258 			halBssidMatchSupport		: 1,
259 			hal4kbSplitTransSupport		: 1,
260 			halHasRxSelfLinkedTail		: 1,
261 			halSupportsFastClock5GHz	: 1,
262 			halHasLongRxDescTsf		: 1,
263 			halHasBBReadWar			: 1,
264 			halSerialiseRegWar		: 1,
265 			halMciSupport			: 1,
266 			halRxTxAbortSupport		: 1,
267 			halPaprdEnabled			: 1,
268 			halHasUapsdSupport		: 1,
269 			halWpsPushButtonSupport		: 1,
270 			halBtCoexApsmWar		: 1,
271 			halGenTimerSupport		: 1,
272 			halLDPCSupport			: 1,
273 			halHwBeaconProcSupport		: 1,
274 			halEnhancedDmaSupport		: 1;
275 	uint32_t	halIsrRacSupport		: 1,
276 			halApmEnable			: 1,
277 			halIntrMitigation		: 1,
278 			hal49GhzSupport			: 1,
279 			halAntDivCombSupport		: 1;
280 
281 	uint32_t	halWirelessModes;
282 	uint16_t	halTotalQueues;
283 	uint16_t	halKeyCacheSize;
284 	uint16_t	halLow5GhzChan, halHigh5GhzChan;
285 	uint16_t	halLow2GhzChan, halHigh2GhzChan;
286 	int		halTstampPrecision;
287 	int		halRtsAggrLimit;
288 	uint8_t		halTxChainMask;
289 	uint8_t		halRxChainMask;
290 	uint8_t		halNumGpioPins;
291 	uint8_t		halNumAntCfg2GHz;
292 	uint8_t		halNumAntCfg5GHz;
293 	uint32_t	halIntrMask;
294 	uint8_t		halTxStreams;
295 	uint8_t		halRxStreams;
296 	HAL_MFP_OPT_T	halMfpSupport;
297 
298 	/* AR9300 HAL porting capabilities */
299 	int		hal_paprd_enabled;
300 	int		hal_pcie_lcr_offset;
301 	int		hal_pcie_lcr_extsync_en;
302 	int		halNumTxMaps;
303 	int		halTxDescLen;
304 	int		halTxStatusLen;
305 	int		halRxStatusLen;
306 	int		halRxHpFifoDepth;
307 	int		halRxLpFifoDepth;
308 	uint32_t	halRegCap;		/* XXX needed? */
309 	int		halNumMRRetries;
310 	int		hal_ani_poll_interval;
311 	int		hal_channel_switch_time_usec;
312 } HAL_CAPABILITIES;
313 
314 struct regDomain;
315 
316 /*
317  * Definitions for ah_flags in ath_hal_private
318  */
319 #define		AH_USE_EEPROM	0x1
320 #define		AH_IS_HB63	0x2
321 
322 /*
323  * The ``private area'' follows immediately after the ``public area''
324  * in the data structure returned by ath_hal_attach.  Private data are
325  * used by device-independent code such as the regulatory domain support.
326  * In general, code within the HAL should never depend on data in the
327  * public area.  Instead any public data needed internally should be
328  * shadowed here.
329  *
330  * When declaring a device-specific ath_hal data structure this structure
331  * is assumed to at the front; e.g.
332  *
333  *	struct ath_hal_5212 {
334  *		struct ath_hal_private	ah_priv;
335  *		...
336  *	};
337  *
338  * It might be better to manage the method pointers in this structure
339  * using an indirect pointer to a read-only data structure but this would
340  * disallow class-style method overriding.
341  */
342 struct ath_hal_private {
343 	struct ath_hal	h;			/* public area */
344 
345 	/* NB: all methods go first to simplify initialization */
346 	HAL_BOOL	(*ah_getChannelEdges)(struct ath_hal*,
347 				uint16_t channelFlags,
348 				uint16_t *lowChannel, uint16_t *highChannel);
349 	u_int		(*ah_getWirelessModes)(struct ath_hal*);
350 	HAL_BOOL	(*ah_eepromRead)(struct ath_hal *, u_int off,
351 				uint16_t *data);
352 	HAL_BOOL	(*ah_eepromWrite)(struct ath_hal *, u_int off,
353 				uint16_t data);
354 	HAL_BOOL	(*ah_getChipPowerLimits)(struct ath_hal *,
355 				struct ieee80211_channel *);
356 	int16_t		(*ah_getNfAdjust)(struct ath_hal *,
357 				const HAL_CHANNEL_INTERNAL*);
358 	void		(*ah_getNoiseFloor)(struct ath_hal *,
359 				int16_t nfarray[]);
360 
361 	void		*ah_eeprom;		/* opaque EEPROM state */
362 	uint16_t	ah_eeversion;		/* EEPROM version */
363 	void		(*ah_eepromDetach)(struct ath_hal *);
364 	HAL_STATUS	(*ah_eepromGet)(struct ath_hal *, int, void *);
365 	HAL_STATUS	(*ah_eepromSet)(struct ath_hal *, int, int);
366 	uint16_t	(*ah_getSpurChan)(struct ath_hal *, int, HAL_BOOL);
367 	HAL_BOOL	(*ah_eepromDiag)(struct ath_hal *, int request,
368 			    const void *args, uint32_t argsize,
369 			    void **result, uint32_t *resultsize);
370 
371 	/*
372 	 * Device revision information.
373 	 */
374 	uint16_t	ah_devid;		/* PCI device ID */
375 	uint16_t	ah_subvendorid;		/* PCI subvendor ID */
376 	uint32_t	ah_macVersion;		/* MAC version id */
377 	uint16_t	ah_macRev;		/* MAC revision */
378 	uint16_t	ah_phyRev;		/* PHY revision */
379 	uint16_t	ah_analog5GhzRev;	/* 2GHz radio revision */
380 	uint16_t	ah_analog2GhzRev;	/* 5GHz radio revision */
381 	uint32_t	ah_flags;		/* misc flags */
382 	uint8_t		ah_ispcie;		/* PCIE, special treatment */
383 	uint8_t		ah_devType;		/* card type - CB, PCI, PCIe */
384 
385 	HAL_OPMODE	ah_opmode;		/* operating mode from reset */
386 	const struct ieee80211_channel *ah_curchan;/* operating channel */
387 	HAL_CAPABILITIES ah_caps;		/* device capabilities */
388 	uint32_t	ah_diagreg;		/* user-specified AR_DIAG_SW */
389 	int16_t		ah_powerLimit;		/* tx power cap */
390 	uint16_t	ah_maxPowerLevel;	/* calculated max tx power */
391 	u_int		ah_tpScale;		/* tx power scale factor */
392 	uint32_t	ah_11nCompat;		/* 11n compat controls */
393 
394 	/*
395 	 * State for regulatory domain handling.
396 	 */
397 	HAL_REG_DOMAIN	ah_currentRD;		/* EEPROM regulatory domain */
398 	HAL_REG_DOMAIN	ah_currentRDext;	/* EEPROM extended regdomain flags */
399 	HAL_DFS_DOMAIN	ah_dfsDomain;		/* current DFS domain */
400 	HAL_CHANNEL_INTERNAL ah_channels[AH_MAXCHAN]; /* private chan state */
401 	u_int		ah_nchan;		/* valid items in ah_channels */
402 	const struct regDomain *ah_rd2GHz;	/* reg state for 2G band */
403 	const struct regDomain *ah_rd5GHz;	/* reg state for 5G band */
404 
405 	uint8_t    	ah_coverageClass;   	/* coverage class */
406 	/*
407 	 * RF Silent handling; setup according to the EEPROM.
408 	 */
409 	uint16_t	ah_rfsilent;		/* GPIO pin + polarity */
410 	HAL_BOOL	ah_rfkillEnabled;	/* enable/disable RfKill */
411 	/*
412 	 * Diagnostic support for discriminating HIUERR reports.
413 	 */
414 	uint32_t	ah_fatalState[6];	/* AR_ISR+shadow regs */
415 	int		ah_rxornIsFatal;	/* how to treat HAL_INT_RXORN */
416 
417 #ifndef	ATH_NF_PER_CHAN
418 	HAL_NFCAL_HIST_FULL	nf_cal_hist;
419 #endif	/* ! ATH_NF_PER_CHAN */
420 };
421 
422 #define	AH_PRIVATE(_ah)	((struct ath_hal_private *)(_ah))
423 
424 #define	ath_hal_getChannelEdges(_ah, _cf, _lc, _hc) \
425 	AH_PRIVATE(_ah)->ah_getChannelEdges(_ah, _cf, _lc, _hc)
426 #define	ath_hal_getWirelessModes(_ah) \
427 	AH_PRIVATE(_ah)->ah_getWirelessModes(_ah)
428 #define	ath_hal_eepromRead(_ah, _off, _data) \
429 	AH_PRIVATE(_ah)->ah_eepromRead(_ah, _off, _data)
430 #define	ath_hal_eepromWrite(_ah, _off, _data) \
431 	AH_PRIVATE(_ah)->ah_eepromWrite(_ah, _off, _data)
432 #define	ath_hal_gpioCfgOutput(_ah, _gpio, _type) \
433 	(_ah)->ah_gpioCfgOutput(_ah, _gpio, _type)
434 #define	ath_hal_gpioCfgInput(_ah, _gpio) \
435 	(_ah)->ah_gpioCfgInput(_ah, _gpio)
436 #define	ath_hal_gpioGet(_ah, _gpio) \
437 	(_ah)->ah_gpioGet(_ah, _gpio)
438 #define	ath_hal_gpioSet(_ah, _gpio, _val) \
439 	(_ah)->ah_gpioSet(_ah, _gpio, _val)
440 #define	ath_hal_gpioSetIntr(_ah, _gpio, _ilevel) \
441 	(_ah)->ah_gpioSetIntr(_ah, _gpio, _ilevel)
442 #define	ath_hal_getpowerlimits(_ah, _chan) \
443 	AH_PRIVATE(_ah)->ah_getChipPowerLimits(_ah, _chan)
444 #define ath_hal_getNfAdjust(_ah, _c) \
445 	AH_PRIVATE(_ah)->ah_getNfAdjust(_ah, _c)
446 #define	ath_hal_getNoiseFloor(_ah, _nfArray) \
447 	AH_PRIVATE(_ah)->ah_getNoiseFloor(_ah, _nfArray)
448 #define	ath_hal_configPCIE(_ah, _reset, _poweroff) \
449 	(_ah)->ah_configPCIE(_ah, _reset, _poweroff)
450 #define	ath_hal_disablePCIE(_ah) \
451 	(_ah)->ah_disablePCIE(_ah)
452 #define	ath_hal_setInterrupts(_ah, _mask) \
453 	(_ah)->ah_setInterrupts(_ah, _mask)
454 
455 #define ath_hal_isrfkillenabled(_ah)  \
456     (ath_hal_getcapability(_ah, HAL_CAP_RFSILENT, 1, AH_NULL) == HAL_OK)
457 #define ath_hal_enable_rfkill(_ah, _v) \
458     ath_hal_setcapability(_ah, HAL_CAP_RFSILENT, 1, _v, AH_NULL)
459 #define ath_hal_hasrfkill_int(_ah)  \
460     (ath_hal_getcapability(_ah, HAL_CAP_RFSILENT, 3, AH_NULL) == HAL_OK)
461 
462 #define	ath_hal_eepromDetach(_ah) do {				\
463 	if (AH_PRIVATE(_ah)->ah_eepromDetach != AH_NULL)	\
464 		AH_PRIVATE(_ah)->ah_eepromDetach(_ah);		\
465 } while (0)
466 #define	ath_hal_eepromGet(_ah, _param, _val) \
467 	AH_PRIVATE(_ah)->ah_eepromGet(_ah, _param, _val)
468 #define	ath_hal_eepromSet(_ah, _param, _val) \
469 	AH_PRIVATE(_ah)->ah_eepromSet(_ah, _param, _val)
470 #define	ath_hal_eepromGetFlag(_ah, _param) \
471 	(AH_PRIVATE(_ah)->ah_eepromGet(_ah, _param, AH_NULL) == HAL_OK)
472 #define ath_hal_getSpurChan(_ah, _ix, _is2G) \
473 	AH_PRIVATE(_ah)->ah_getSpurChan(_ah, _ix, _is2G)
474 #define	ath_hal_eepromDiag(_ah, _request, _a, _asize, _r, _rsize) \
475 	AH_PRIVATE(_ah)->ah_eepromDiag(_ah, _request, _a, _asize,  _r, _rsize)
476 
477 #ifndef _NET_IF_IEEE80211_H_
478 /*
479  * Stuff that would naturally come from _ieee80211.h
480  */
481 #define	IEEE80211_ADDR_LEN		6
482 
483 #define	IEEE80211_WEP_IVLEN			3	/* 24bit */
484 #define	IEEE80211_WEP_KIDLEN			1	/* 1 octet */
485 #define	IEEE80211_WEP_CRCLEN			4	/* CRC-32 */
486 
487 #define	IEEE80211_CRC_LEN			4
488 
489 #define	IEEE80211_MAX_LEN			(2300 + IEEE80211_CRC_LEN + \
490     (IEEE80211_WEP_IVLEN + IEEE80211_WEP_KIDLEN + IEEE80211_WEP_CRCLEN))
491 #endif /* _NET_IF_IEEE80211_H_ */
492 
493 #define HAL_TXQ_USE_LOCKOUT_BKOFF_DIS	0x00000001
494 
495 #define INIT_AIFS		2
496 #define INIT_CWMIN		15
497 #define INIT_CWMIN_11B		31
498 #define INIT_CWMAX		1023
499 #define INIT_SH_RETRY		10
500 #define INIT_LG_RETRY		10
501 #define INIT_SSH_RETRY		32
502 #define INIT_SLG_RETRY		32
503 
504 typedef struct {
505 	uint32_t	tqi_ver;		/* HAL TXQ verson */
506 	HAL_TX_QUEUE	tqi_type;		/* hw queue type*/
507 	HAL_TX_QUEUE_SUBTYPE tqi_subtype;	/* queue subtype, if applicable */
508 	HAL_TX_QUEUE_FLAGS tqi_qflags;		/* queue flags */
509 	uint32_t	tqi_priority;
510 	uint32_t	tqi_aifs;		/* aifs */
511 	uint32_t	tqi_cwmin;		/* cwMin */
512 	uint32_t	tqi_cwmax;		/* cwMax */
513 	uint16_t	tqi_shretry;		/* frame short retry limit */
514 	uint16_t	tqi_lgretry;		/* frame long retry limit */
515 	uint32_t	tqi_cbrPeriod;
516 	uint32_t	tqi_cbrOverflowLimit;
517 	uint32_t	tqi_burstTime;
518 	uint32_t	tqi_readyTime;
519 	uint32_t	tqi_physCompBuf;
520 	uint32_t	tqi_intFlags;		/* flags for internal use */
521 } HAL_TX_QUEUE_INFO;
522 
523 extern	HAL_BOOL ath_hal_setTxQProps(struct ath_hal *ah,
524 		HAL_TX_QUEUE_INFO *qi, const HAL_TXQ_INFO *qInfo);
525 extern	HAL_BOOL ath_hal_getTxQProps(struct ath_hal *ah,
526 		HAL_TXQ_INFO *qInfo, const HAL_TX_QUEUE_INFO *qi);
527 
528 #define	HAL_SPUR_VAL_MASK		0x3FFF
529 #define	HAL_SPUR_CHAN_WIDTH		87
530 #define	HAL_BIN_WIDTH_BASE_100HZ	3125
531 #define	HAL_BIN_WIDTH_TURBO_100HZ	6250
532 #define	HAL_MAX_BINS_ALLOWED		28
533 
534 #define	IS_CHAN_5GHZ(_c)	((_c)->channel > 4900)
535 #define	IS_CHAN_2GHZ(_c)	(!IS_CHAN_5GHZ(_c))
536 
537 #define	IS_CHAN_IN_PUBLIC_SAFETY_BAND(_c) ((_c) > 4940 && (_c) < 4990)
538 
539 /*
540  * Deduce if the host cpu has big- or litt-endian byte order.
541  */
542 static __inline__ int
543 isBigEndian(void)
544 {
545 	union {
546 		int32_t i;
547 		char c[4];
548 	} u;
549 	u.i = 1;
550 	return (u.c[0] == 0);
551 }
552 
553 /* unalligned little endian access */
554 #define LE_READ_2(p)							\
555 	((uint16_t)							\
556 	 ((((const uint8_t *)(p))[0]    ) | (((const uint8_t *)(p))[1]<< 8)))
557 #define LE_READ_4(p)							\
558 	((uint32_t)							\
559 	 ((((const uint8_t *)(p))[0]    ) | (((const uint8_t *)(p))[1]<< 8) |\
560 	  (((const uint8_t *)(p))[2]<<16) | (((const uint8_t *)(p))[3]<<24)))
561 
562 /*
563  * Register manipulation macros that expect bit field defines
564  * to follow the convention that an _S suffix is appended for
565  * a shift count, while the field mask has no suffix.
566  */
567 #define	SM(_v, _f)	(((_v) << _f##_S) & (_f))
568 #define	MS(_v, _f)	(((_v) & (_f)) >> _f##_S)
569 #define OS_REG_RMW(_a, _r, _set, _clr)    \
570 	OS_REG_WRITE(_a, _r, (OS_REG_READ(_a, _r) & ~(_clr)) | (_set))
571 #define	OS_REG_RMW_FIELD(_a, _r, _f, _v) \
572 	OS_REG_WRITE(_a, _r, \
573 		(OS_REG_READ(_a, _r) &~ (_f)) | (((_v) << _f##_S) & (_f)))
574 #define	OS_REG_SET_BIT(_a, _r, _f) \
575 	OS_REG_WRITE(_a, _r, OS_REG_READ(_a, _r) | (_f))
576 #define	OS_REG_CLR_BIT(_a, _r, _f) \
577 	OS_REG_WRITE(_a, _r, OS_REG_READ(_a, _r) &~ (_f))
578 #define OS_REG_IS_BIT_SET(_a, _r, _f) \
579 	    ((OS_REG_READ(_a, _r) & (_f)) != 0)
580 #define	OS_REG_RMW_FIELD_ALT(_a, _r, _f, _v) \
581 	    OS_REG_WRITE(_a, _r, \
582 	    (OS_REG_READ(_a, _r) &~(_f<<_f##_S)) | \
583 	    (((_v) << _f##_S) & (_f<<_f##_S)))
584 #define	OS_REG_READ_FIELD(_a, _r, _f) \
585 	    (((OS_REG_READ(_a, _r) & _f) >> _f##_S))
586 #define	OS_REG_READ_FIELD_ALT(_a, _r, _f) \
587 	    ((OS_REG_READ(_a, _r) >> (_f##_S))&(_f))
588 
589 /* Analog register writes may require a delay between each one (eg Merlin?) */
590 #define	OS_A_REG_RMW_FIELD(_a, _r, _f, _v) \
591 	do { OS_REG_WRITE(_a, _r, (OS_REG_READ(_a, _r) &~ (_f)) | \
592 	    (((_v) << _f##_S) & (_f))) ; OS_DELAY(100); } while (0)
593 #define	OS_A_REG_WRITE(_a, _r, _v) \
594 	do { OS_REG_WRITE(_a, _r, _v); OS_DELAY(100); } while (0)
595 
596 /* wait for the register contents to have the specified value */
597 extern	HAL_BOOL ath_hal_wait(struct ath_hal *, u_int reg,
598 		uint32_t mask, uint32_t val);
599 extern	HAL_BOOL ath_hal_waitfor(struct ath_hal *, u_int reg,
600 		uint32_t mask, uint32_t val, uint32_t timeout);
601 
602 /* return the first n bits in val reversed */
603 extern	uint32_t ath_hal_reverseBits(uint32_t val, uint32_t n);
604 
605 /* printf interfaces */
606 extern	void ath_hal_printf(struct ath_hal *, const char*, ...)
607 		__printflike(2,3);
608 extern	void ath_hal_vprintf(struct ath_hal *, const char*, __va_list)
609 		__printflike(2, 0);
610 extern	const char* ath_hal_ether_sprintf(const uint8_t *mac);
611 
612 /* allocate and free memory */
613 extern	void *ath_hal_malloc(size_t);
614 extern	void ath_hal_free(void *);
615 
616 /* common debugging interfaces */
617 #ifdef AH_DEBUG
618 #include "ah_debug.h"
619 extern	int ath_hal_debug;	/* Global debug flags */
620 
621 /*
622  * The typecast is purely because some callers will pass in
623  * AH_NULL directly rather than using a NULL ath_hal pointer.
624  */
625 #define	HALDEBUG(_ah, __m, ...) \
626 	do {							\
627 		if ((__m) == HAL_DEBUG_UNMASKABLE ||		\
628 		    ath_hal_debug & (__m) ||			\
629 		    ((_ah) != NULL &&				\
630 		      ((struct ath_hal *) (_ah))->ah_config.ah_debug & (__m))) {	\
631 			DO_HALDEBUG((_ah), (__m), __VA_ARGS__);	\
632 		}						\
633 	} while(0);
634 
635 extern	void DO_HALDEBUG(struct ath_hal *ah, u_int mask, const char* fmt, ...)
636 	__printflike(3,4);
637 #else
638 #define HALDEBUG(_ah, __m, ...)
639 #endif /* AH_DEBUG */
640 
641 /*
642  * Register logging definitions shared with ardecode.
643  */
644 #include "ah_decode.h"
645 
646 /*
647  * Common assertion interface.  Note: it is a bad idea to generate
648  * an assertion failure for any recoverable event.  Instead catch
649  * the violation and, if possible, fix it up or recover from it; either
650  * with an error return value or a diagnostic messages.  System software
651  * does not panic unless the situation is hopeless.
652  */
653 #ifdef AH_ASSERT
654 extern	void ath_hal_assert_failed(const char* filename,
655 		int lineno, const char* msg);
656 
657 #define	HALASSERT(_x) do {					\
658 	if (!(_x)) {						\
659 		ath_hal_assert_failed(__FILE__, __LINE__, #_x);	\
660 	}							\
661 } while (0)
662 #else
663 #define	HALASSERT(_x)
664 #endif /* AH_ASSERT */
665 
666 /*
667  * Regulatory domain support.
668  */
669 
670 /*
671  * Return the max allowed antenna gain and apply any regulatory
672  * domain specific changes.
673  */
674 u_int	ath_hal_getantennareduction(struct ath_hal *ah,
675 	    const struct ieee80211_channel *chan, u_int twiceGain);
676 
677 /*
678  * Return the test group for the specific channel based on
679  * the current regulatory setup.
680  */
681 u_int	ath_hal_getctl(struct ath_hal *, const struct ieee80211_channel *);
682 
683 /*
684  * Map a public channel definition to the corresponding
685  * internal data structure.  This implicitly specifies
686  * whether or not the specified channel is ok to use
687  * based on the current regulatory domain constraints.
688  */
689 #ifndef AH_DEBUG
690 static OS_INLINE HAL_CHANNEL_INTERNAL *
691 ath_hal_checkchannel(struct ath_hal *ah, const struct ieee80211_channel *c)
692 {
693 	HAL_CHANNEL_INTERNAL *cc;
694 
695 	HALASSERT(c->ic_devdata < AH_PRIVATE(ah)->ah_nchan);
696 	cc = &AH_PRIVATE(ah)->ah_channels[c->ic_devdata];
697 	HALASSERT(c->ic_freq == cc->channel || IEEE80211_IS_CHAN_GSM(c));
698 	return cc;
699 }
700 #else
701 /* NB: non-inline version that checks state */
702 HAL_CHANNEL_INTERNAL *ath_hal_checkchannel(struct ath_hal *,
703 		const struct ieee80211_channel *);
704 #endif /* AH_DEBUG */
705 
706 /*
707  * Return the h/w frequency for a channel.  This may be
708  * different from ic_freq if this is a GSM device that
709  * takes 2.4GHz frequencies and down-converts them.
710  */
711 static OS_INLINE uint16_t
712 ath_hal_gethwchannel(struct ath_hal *ah, const struct ieee80211_channel *c)
713 {
714 	return ath_hal_checkchannel(ah, c)->channel;
715 }
716 
717 /*
718  * Convert between microseconds and core system clocks.
719  */
720 extern	u_int ath_hal_mac_clks(struct ath_hal *ah, u_int usecs);
721 extern	u_int ath_hal_mac_usec(struct ath_hal *ah, u_int clks);
722 
723 /*
724  * Generic get/set capability support.  Each chip overrides
725  * this routine to support chip-specific capabilities.
726  */
727 extern	HAL_STATUS ath_hal_getcapability(struct ath_hal *ah,
728 		HAL_CAPABILITY_TYPE type, uint32_t capability,
729 		uint32_t *result);
730 extern	HAL_BOOL ath_hal_setcapability(struct ath_hal *ah,
731 		HAL_CAPABILITY_TYPE type, uint32_t capability,
732 		uint32_t setting, HAL_STATUS *status);
733 
734 /* The diagnostic codes used to be internally defined here -adrian */
735 #include "ah_diagcodes.h"
736 
737 /*
738  * The AR5416 and later HALs have MAC and baseband hang checking.
739  */
740 typedef struct {
741 	uint32_t hang_reg_offset;
742 	uint32_t hang_val;
743 	uint32_t hang_mask;
744 	uint32_t hang_offset;
745 } hal_hw_hang_check_t;
746 
747 typedef struct {
748 	uint32_t dma_dbg_3;
749 	uint32_t dma_dbg_4;
750 	uint32_t dma_dbg_5;
751 	uint32_t dma_dbg_6;
752 } mac_dbg_regs_t;
753 
754 typedef enum {
755 	dcu_chain_state		= 0x1,
756 	dcu_complete_state	= 0x2,
757 	qcu_state		= 0x4,
758 	qcu_fsp_ok		= 0x8,
759 	qcu_fsp_state		= 0x10,
760 	qcu_stitch_state	= 0x20,
761 	qcu_fetch_state		= 0x40,
762 	qcu_complete_state	= 0x80
763 } hal_mac_hangs_t;
764 
765 typedef struct {
766 	int states;
767 	uint8_t dcu_chain_state;
768 	uint8_t dcu_complete_state;
769 	uint8_t qcu_state;
770 	uint8_t qcu_fsp_ok;
771 	uint8_t qcu_fsp_state;
772 	uint8_t qcu_stitch_state;
773 	uint8_t qcu_fetch_state;
774 	uint8_t qcu_complete_state;
775 } hal_mac_hang_check_t;
776 
777 enum {
778     HAL_BB_HANG_DFS		= 0x0001,
779     HAL_BB_HANG_RIFS		= 0x0002,
780     HAL_BB_HANG_RX_CLEAR	= 0x0004,
781     HAL_BB_HANG_UNKNOWN		= 0x0080,
782 
783     HAL_MAC_HANG_SIG1		= 0x0100,
784     HAL_MAC_HANG_SIG2		= 0x0200,
785     HAL_MAC_HANG_UNKNOWN	= 0x8000,
786 
787     HAL_BB_HANGS = HAL_BB_HANG_DFS
788 		 | HAL_BB_HANG_RIFS
789 		 | HAL_BB_HANG_RX_CLEAR
790 		 | HAL_BB_HANG_UNKNOWN,
791     HAL_MAC_HANGS = HAL_MAC_HANG_SIG1
792 		 | HAL_MAC_HANG_SIG2
793 		 | HAL_MAC_HANG_UNKNOWN,
794 };
795 
796 /* Merge these with above */
797 typedef enum hal_hw_hangs {
798     HAL_DFS_BB_HANG_WAR          = 0x1,
799     HAL_RIFS_BB_HANG_WAR         = 0x2,
800     HAL_RX_STUCK_LOW_BB_HANG_WAR = 0x4,
801     HAL_MAC_HANG_WAR             = 0x8,
802     HAL_PHYRESTART_CLR_WAR       = 0x10,
803     HAL_MAC_HANG_DETECTED        = 0x40000000,
804     HAL_BB_HANG_DETECTED         = 0x80000000
805 } hal_hw_hangs_t;
806 
807 /*
808  * Device revision information.
809  */
810 typedef struct {
811 	uint16_t	ah_devid;		/* PCI device ID */
812 	uint16_t	ah_subvendorid;		/* PCI subvendor ID */
813 	uint32_t	ah_macVersion;		/* MAC version id */
814 	uint16_t	ah_macRev;		/* MAC revision */
815 	uint16_t	ah_phyRev;		/* PHY revision */
816 	uint16_t	ah_analog5GhzRev;	/* 2GHz radio revision */
817 	uint16_t	ah_analog2GhzRev;	/* 5GHz radio revision */
818 } HAL_REVS;
819 
820 /*
821  * Argument payload for HAL_DIAG_SETKEY.
822  */
823 typedef struct {
824 	HAL_KEYVAL	dk_keyval;
825 	uint16_t	dk_keyix;	/* key index */
826 	uint8_t		dk_mac[IEEE80211_ADDR_LEN];
827 	int		dk_xor;		/* XOR key data */
828 } HAL_DIAG_KEYVAL;
829 
830 /*
831  * Argument payload for HAL_DIAG_EEWRITE.
832  */
833 typedef struct {
834 	uint16_t	ee_off;		/* eeprom offset */
835 	uint16_t	ee_data;	/* write data */
836 } HAL_DIAG_EEVAL;
837 
838 
839 typedef struct {
840 	u_int offset;		/* reg offset */
841 	uint32_t val;		/* reg value  */
842 } HAL_DIAG_REGVAL;
843 
844 /*
845  * 11n compatibility tweaks.
846  */
847 #define	HAL_DIAG_11N_SERVICES	0x00000003
848 #define	HAL_DIAG_11N_SERVICES_S	0
849 #define	HAL_DIAG_11N_TXSTOMP	0x0000000c
850 #define	HAL_DIAG_11N_TXSTOMP_S	2
851 
852 typedef struct {
853 	int		maxNoiseImmunityLevel;	/* [0..4] */
854 	int		totalSizeDesired[5];
855 	int		coarseHigh[5];
856 	int		coarseLow[5];
857 	int		firpwr[5];
858 
859 	int		maxSpurImmunityLevel;	/* [0..7] */
860 	int		cycPwrThr1[8];
861 
862 	int		maxFirstepLevel;	/* [0..2] */
863 	int		firstep[3];
864 
865 	uint32_t	ofdmTrigHigh;
866 	uint32_t	ofdmTrigLow;
867 	int32_t		cckTrigHigh;
868 	int32_t		cckTrigLow;
869 	int32_t		rssiThrLow;
870 	int32_t		rssiThrHigh;
871 
872 	int		period;			/* update listen period */
873 } HAL_ANI_PARAMS;
874 
875 extern	HAL_BOOL ath_hal_getdiagstate(struct ath_hal *ah, int request,
876 			const void *args, uint32_t argsize,
877 			void **result, uint32_t *resultsize);
878 
879 /*
880  * Setup a h/w rate table for use.
881  */
882 extern	void ath_hal_setupratetable(struct ath_hal *ah, HAL_RATE_TABLE *rt);
883 
884 /*
885  * Common routine for implementing getChanNoise api.
886  */
887 int16_t	ath_hal_getChanNoise(struct ath_hal *, const struct ieee80211_channel *);
888 
889 /*
890  * Initialization support.
891  */
892 typedef struct {
893 	const uint32_t	*data;
894 	int		rows, cols;
895 } HAL_INI_ARRAY;
896 
897 #define	HAL_INI_INIT(_ia, _data, _cols) do {			\
898 	(_ia)->data = (const uint32_t *)(_data);		\
899 	(_ia)->rows = sizeof(_data) / sizeof((_data)[0]);	\
900 	(_ia)->cols = (_cols);					\
901 } while (0)
902 #define	HAL_INI_VAL(_ia, _r, _c) \
903 	((_ia)->data[((_r)*(_ia)->cols) + (_c)])
904 
905 /*
906  * OS_DELAY() does a PIO READ on the PCI bus which allows
907  * other cards' DMA reads to complete in the middle of our reset.
908  */
909 #define DMA_YIELD(x) do {		\
910 	if ((++(x) % 64) == 0)		\
911 		OS_DELAY(1);		\
912 } while (0)
913 
914 #define HAL_INI_WRITE_ARRAY(ah, regArray, col, regWr) do {             	\
915 	int r;								\
916 	for (r = 0; r < N(regArray); r++) {				\
917 		OS_REG_WRITE(ah, (regArray)[r][0], (regArray)[r][col]);	\
918 		DMA_YIELD(regWr);					\
919 	}								\
920 } while (0)
921 
922 #define HAL_INI_WRITE_BANK(ah, regArray, bankData, regWr) do {		\
923 	int r;								\
924 	for (r = 0; r < N(regArray); r++) {				\
925 		OS_REG_WRITE(ah, (regArray)[r][0], (bankData)[r]);	\
926 		DMA_YIELD(regWr);					\
927 	}								\
928 } while (0)
929 
930 extern	int ath_hal_ini_write(struct ath_hal *ah, const HAL_INI_ARRAY *ia,
931 		int col, int regWr);
932 extern	void ath_hal_ini_bank_setup(uint32_t data[], const HAL_INI_ARRAY *ia,
933 		int col);
934 extern	int ath_hal_ini_bank_write(struct ath_hal *ah, const HAL_INI_ARRAY *ia,
935 		const uint32_t data[], int regWr);
936 
937 #define	CCK_SIFS_TIME		10
938 #define	CCK_PREAMBLE_BITS	144
939 #define	CCK_PLCP_BITS		48
940 
941 #define	OFDM_SIFS_TIME		16
942 #define	OFDM_PREAMBLE_TIME	20
943 #define	OFDM_PLCP_BITS		22
944 #define	OFDM_SYMBOL_TIME	4
945 
946 #define	OFDM_HALF_SIFS_TIME	32
947 #define	OFDM_HALF_PREAMBLE_TIME	40
948 #define	OFDM_HALF_PLCP_BITS	22
949 #define	OFDM_HALF_SYMBOL_TIME	8
950 
951 #define	OFDM_QUARTER_SIFS_TIME 		64
952 #define	OFDM_QUARTER_PREAMBLE_TIME	80
953 #define	OFDM_QUARTER_PLCP_BITS		22
954 #define	OFDM_QUARTER_SYMBOL_TIME	16
955 
956 #define	TURBO_SIFS_TIME		8
957 #define	TURBO_PREAMBLE_TIME	14
958 #define	TURBO_PLCP_BITS		22
959 #define	TURBO_SYMBOL_TIME	4
960 
961 #define	WLAN_CTRL_FRAME_SIZE	(2+2+6+4)	/* ACK+FCS */
962 
963 /* Generic EEPROM board value functions */
964 extern	HAL_BOOL ath_ee_getLowerUpperIndex(uint8_t target, uint8_t *pList,
965 	uint16_t listSize, uint16_t *indexL, uint16_t *indexR);
966 extern	HAL_BOOL ath_ee_FillVpdTable(uint8_t pwrMin, uint8_t pwrMax,
967 	uint8_t *pPwrList, uint8_t *pVpdList, uint16_t numIntercepts,
968 	uint8_t *pRetVpdList);
969 extern	int16_t ath_ee_interpolate(uint16_t target, uint16_t srcLeft,
970 	uint16_t srcRight, int16_t targetLeft, int16_t targetRight);
971 
972 /* Whether 5ghz fast clock is needed */
973 /*
974  * The chipset (Merlin, AR9300/later) should set the capability flag below;
975  * this flag simply says that the hardware can do it, not that the EEPROM
976  * says it can.
977  *
978  * Merlin 2.0/2.1 chips with an EEPROM version > 16 do 5ghz fast clock
979  *   if the relevant eeprom flag is set.
980  * Merlin 2.0/2.1 chips with an EEPROM version <= 16 do 5ghz fast clock
981  *   by default.
982  */
983 #define	IS_5GHZ_FAST_CLOCK_EN(_ah, _c) \
984 	(IEEE80211_IS_CHAN_5GHZ(_c) && \
985 	 AH_PRIVATE((_ah))->ah_caps.halSupportsFastClock5GHz && \
986 	ath_hal_eepromGetFlag((_ah), AR_EEP_FSTCLK_5G))
987 
988 /*
989  * Fetch the maximum regulatory domain power for the given channel
990  * in 1/2dBm steps.
991  */
992 static inline int
993 ath_hal_get_twice_max_regpower(struct ath_hal_private *ahp,
994     const HAL_CHANNEL_INTERNAL *ichan, const struct ieee80211_channel *chan)
995 {
996 	struct ath_hal *ah = &ahp->h;
997 
998 	if (! chan) {
999 		ath_hal_printf(ah, "%s: called with chan=NULL!\n", __func__);
1000 		return (0);
1001 	}
1002 	return (chan->ic_maxpower);
1003 }
1004 
1005 /*
1006  * Get the maximum antenna gain allowed, in 1/2dBm steps.
1007  */
1008 static inline int
1009 ath_hal_getantennaallowed(struct ath_hal *ah,
1010     const struct ieee80211_channel *chan)
1011 {
1012 
1013 	if (! chan)
1014 		return (0);
1015 
1016 	return (chan->ic_maxantgain);
1017 }
1018 
1019 
1020 #endif /* _ATH_AH_INTERAL_H_ */
1021