1 /* 2 * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting 3 * Copyright (c) 2002-2008 Atheros Communications, Inc. 4 * 5 * Permission to use, copy, modify, and/or distribute this software for any 6 * purpose with or without fee is hereby granted, provided that the above 7 * copyright notice and this permission notice appear in all copies. 8 * 9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 16 * 17 * $FreeBSD$ 18 */ 19 20 #ifndef _ATH_AH_H_ 21 #define _ATH_AH_H_ 22 /* 23 * Atheros Hardware Access Layer 24 * 25 * Clients of the HAL call ath_hal_attach to obtain a reference to an ath_hal 26 * structure for use with the device. Hardware-related operations that 27 * follow must call back into the HAL through interface, supplying the 28 * reference as the first parameter. 29 */ 30 31 #include "ah_osdep.h" 32 33 /* 34 * The maximum number of TX/RX chains supported. 35 * This is intended to be used by various statistics gathering operations 36 * (NF, RSSI, EVM). 37 */ 38 #define AH_MIMO_MAX_CHAINS 3 39 #define AH_MIMO_MAX_EVM_PILOTS 6 40 41 /* 42 * __ahdecl is analogous to _cdecl; it defines the calling 43 * convention used within the HAL. For most systems this 44 * can just default to be empty and the compiler will (should) 45 * use _cdecl. For systems where _cdecl is not compatible this 46 * must be defined. See linux/ah_osdep.h for an example. 47 */ 48 #ifndef __ahdecl 49 #define __ahdecl 50 #endif 51 52 /* 53 * Status codes that may be returned by the HAL. Note that 54 * interfaces that return a status code set it only when an 55 * error occurs--i.e. you cannot check it for success. 56 */ 57 typedef enum { 58 HAL_OK = 0, /* No error */ 59 HAL_ENXIO = 1, /* No hardware present */ 60 HAL_ENOMEM = 2, /* Memory allocation failed */ 61 HAL_EIO = 3, /* Hardware didn't respond as expected */ 62 HAL_EEMAGIC = 4, /* EEPROM magic number invalid */ 63 HAL_EEVERSION = 5, /* EEPROM version invalid */ 64 HAL_EELOCKED = 6, /* EEPROM unreadable */ 65 HAL_EEBADSUM = 7, /* EEPROM checksum invalid */ 66 HAL_EEREAD = 8, /* EEPROM read problem */ 67 HAL_EEBADMAC = 9, /* EEPROM mac address invalid */ 68 HAL_EESIZE = 10, /* EEPROM size not supported */ 69 HAL_EEWRITE = 11, /* Attempt to change write-locked EEPROM */ 70 HAL_EINVAL = 12, /* Invalid parameter to function */ 71 HAL_ENOTSUPP = 13, /* Hardware revision not supported */ 72 HAL_ESELFTEST = 14, /* Hardware self-test failed */ 73 HAL_EINPROGRESS = 15, /* Operation incomplete */ 74 HAL_EEBADREG = 16, /* EEPROM invalid regulatory contents */ 75 HAL_EEBADCC = 17, /* EEPROM invalid country code */ 76 } HAL_STATUS; 77 78 typedef enum { 79 AH_FALSE = 0, /* NB: lots of code assumes false is zero */ 80 AH_TRUE = 1, 81 } HAL_BOOL; 82 83 typedef enum { 84 HAL_CAP_REG_DMN = 0, /* current regulatory domain */ 85 HAL_CAP_CIPHER = 1, /* hardware supports cipher */ 86 HAL_CAP_TKIP_MIC = 2, /* handle TKIP MIC in hardware */ 87 HAL_CAP_TKIP_SPLIT = 3, /* hardware TKIP uses split keys */ 88 HAL_CAP_PHYCOUNTERS = 4, /* hardware PHY error counters */ 89 HAL_CAP_DIVERSITY = 5, /* hardware supports fast diversity */ 90 HAL_CAP_KEYCACHE_SIZE = 6, /* number of entries in key cache */ 91 HAL_CAP_NUM_TXQUEUES = 7, /* number of hardware xmit queues */ 92 HAL_CAP_VEOL = 9, /* hardware supports virtual EOL */ 93 HAL_CAP_PSPOLL = 10, /* hardware has working PS-Poll support */ 94 HAL_CAP_DIAG = 11, /* hardware diagnostic support */ 95 HAL_CAP_COMPRESSION = 12, /* hardware supports compression */ 96 HAL_CAP_BURST = 13, /* hardware supports packet bursting */ 97 HAL_CAP_FASTFRAME = 14, /* hardware supoprts fast frames */ 98 HAL_CAP_TXPOW = 15, /* global tx power limit */ 99 HAL_CAP_TPC = 16, /* per-packet tx power control */ 100 HAL_CAP_PHYDIAG = 17, /* hardware phy error diagnostic */ 101 HAL_CAP_BSSIDMASK = 18, /* hardware supports bssid mask */ 102 HAL_CAP_MCAST_KEYSRCH = 19, /* hardware has multicast key search */ 103 HAL_CAP_TSF_ADJUST = 20, /* hardware has beacon tsf adjust */ 104 /* 21 was HAL_CAP_XR */ 105 HAL_CAP_WME_TKIPMIC = 22, /* hardware can support TKIP MIC when WMM is turned on */ 106 /* 23 was HAL_CAP_CHAN_HALFRATE */ 107 /* 24 was HAL_CAP_CHAN_QUARTERRATE */ 108 HAL_CAP_RFSILENT = 25, /* hardware has rfsilent support */ 109 HAL_CAP_TPC_ACK = 26, /* ack txpower with per-packet tpc */ 110 HAL_CAP_TPC_CTS = 27, /* cts txpower with per-packet tpc */ 111 HAL_CAP_11D = 28, /* 11d beacon support for changing cc */ 112 113 HAL_CAP_HT = 30, /* hardware can support HT */ 114 HAL_CAP_GTXTO = 31, /* hardware supports global tx timeout */ 115 HAL_CAP_FAST_CC = 32, /* hardware supports fast channel change */ 116 HAL_CAP_TX_CHAINMASK = 33, /* mask of TX chains supported */ 117 HAL_CAP_RX_CHAINMASK = 34, /* mask of RX chains supported */ 118 HAL_CAP_NUM_GPIO_PINS = 36, /* number of GPIO pins */ 119 120 HAL_CAP_CST = 38, /* hardware supports carrier sense timeout */ 121 122 HAL_CAP_RTS_AGGR_LIMIT = 42, /* aggregation limit with RTS */ 123 HAL_CAP_4ADDR_AGGR = 43, /* hardware is capable of 4addr aggregation */ 124 HAL_CAP_DFS_DMN = 44, /* current DFS domain */ 125 HAL_CAP_EXT_CHAN_DFS = 45, /* DFS support for extension channel */ 126 HAL_CAP_COMBINED_RADAR_RSSI = 46, /* Is combined RSSI for radar accurate */ 127 128 HAL_CAP_AUTO_SLEEP = 48, /* hardware can go to network sleep 129 automatically after waking up to receive TIM */ 130 HAL_CAP_MBSSID_AGGR_SUPPORT = 49, /* Support for mBSSID Aggregation */ 131 HAL_CAP_SPLIT_4KB_TRANS = 50, /* hardware supports descriptors straddling a 4k page boundary */ 132 HAL_CAP_REG_FLAG = 51, /* Regulatory domain flags */ 133 134 HAL_CAP_BT_COEX = 60, /* hardware is capable of bluetooth coexistence */ 135 136 HAL_CAP_HT20_SGI = 96, /* hardware supports HT20 short GI */ 137 138 HAL_CAP_RXTSTAMP_PREC = 100, /* rx desc tstamp precision (bits) */ 139 HAL_CAP_ENHANCED_DFS_SUPPORT = 117, /* hardware supports enhanced DFS */ 140 141 /* The following are private to the FreeBSD HAL (224 onward) */ 142 143 HAL_CAP_INTMIT = 229, /* interference mitigation */ 144 HAL_CAP_RXORN_FATAL = 230, /* HAL_INT_RXORN treated as fatal */ 145 HAL_CAP_BB_HANG = 235, /* can baseband hang */ 146 HAL_CAP_MAC_HANG = 236, /* can MAC hang */ 147 HAL_CAP_INTRMASK = 237, /* bitmask of supported interrupts */ 148 HAL_CAP_BSSIDMATCH = 238, /* hardware has disable bssid match */ 149 HAL_CAP_STREAMS = 239, /* how many 802.11n spatial streams are available */ 150 HAL_CAP_RXDESC_SELFLINK = 242, /* support a self-linked tail RX descriptor */ 151 HAL_CAP_LONG_RXDESC_TSF = 243, /* hardware supports 32bit TSF in RX descriptor */ 152 HAL_CAP_BB_READ_WAR = 244, /* baseband read WAR */ 153 HAL_CAP_SERIALISE_WAR = 245, /* serialise register access on PCI */ 154 } HAL_CAPABILITY_TYPE; 155 156 /* 157 * "States" for setting the LED. These correspond to 158 * the possible 802.11 operational states and there may 159 * be a many-to-one mapping between these states and the 160 * actual hardware state for the LED's (i.e. the hardware 161 * may have fewer states). 162 */ 163 typedef enum { 164 HAL_LED_INIT = 0, 165 HAL_LED_SCAN = 1, 166 HAL_LED_AUTH = 2, 167 HAL_LED_ASSOC = 3, 168 HAL_LED_RUN = 4 169 } HAL_LED_STATE; 170 171 /* 172 * Transmit queue types/numbers. These are used to tag 173 * each transmit queue in the hardware and to identify a set 174 * of transmit queues for operations such as start/stop dma. 175 */ 176 typedef enum { 177 HAL_TX_QUEUE_INACTIVE = 0, /* queue is inactive/unused */ 178 HAL_TX_QUEUE_DATA = 1, /* data xmit q's */ 179 HAL_TX_QUEUE_BEACON = 2, /* beacon xmit q */ 180 HAL_TX_QUEUE_CAB = 3, /* "crap after beacon" xmit q */ 181 HAL_TX_QUEUE_UAPSD = 4, /* u-apsd power save xmit q */ 182 HAL_TX_QUEUE_PSPOLL = 5, /* power save poll xmit q */ 183 } HAL_TX_QUEUE; 184 185 #define HAL_NUM_TX_QUEUES 10 /* max possible # of queues */ 186 187 /* 188 * Transmit queue subtype. These map directly to 189 * WME Access Categories (except for UPSD). Refer 190 * to Table 5 of the WME spec. 191 */ 192 typedef enum { 193 HAL_WME_AC_BK = 0, /* background access category */ 194 HAL_WME_AC_BE = 1, /* best effort access category*/ 195 HAL_WME_AC_VI = 2, /* video access category */ 196 HAL_WME_AC_VO = 3, /* voice access category */ 197 HAL_WME_UPSD = 4, /* uplink power save */ 198 } HAL_TX_QUEUE_SUBTYPE; 199 200 /* 201 * Transmit queue flags that control various 202 * operational parameters. 203 */ 204 typedef enum { 205 /* 206 * Per queue interrupt enables. When set the associated 207 * interrupt may be delivered for packets sent through 208 * the queue. Without these enabled no interrupts will 209 * be delivered for transmits through the queue. 210 */ 211 HAL_TXQ_TXOKINT_ENABLE = 0x0001, /* enable TXOK interrupt */ 212 HAL_TXQ_TXERRINT_ENABLE = 0x0001, /* enable TXERR interrupt */ 213 HAL_TXQ_TXDESCINT_ENABLE = 0x0002, /* enable TXDESC interrupt */ 214 HAL_TXQ_TXEOLINT_ENABLE = 0x0004, /* enable TXEOL interrupt */ 215 HAL_TXQ_TXURNINT_ENABLE = 0x0008, /* enable TXURN interrupt */ 216 /* 217 * Enable hardware compression for packets sent through 218 * the queue. The compression buffer must be setup and 219 * packets must have a key entry marked in the tx descriptor. 220 */ 221 HAL_TXQ_COMPRESSION_ENABLE = 0x0010, /* enable h/w compression */ 222 /* 223 * Disable queue when veol is hit or ready time expires. 224 * By default the queue is disabled only on reaching the 225 * physical end of queue (i.e. a null link ptr in the 226 * descriptor chain). 227 */ 228 HAL_TXQ_RDYTIME_EXP_POLICY_ENABLE = 0x0020, 229 /* 230 * Schedule frames on delivery of a DBA (DMA Beacon Alert) 231 * event. Frames will be transmitted only when this timer 232 * fires, e.g to transmit a beacon in ap or adhoc modes. 233 */ 234 HAL_TXQ_DBA_GATED = 0x0040, /* schedule based on DBA */ 235 /* 236 * Each transmit queue has a counter that is incremented 237 * each time the queue is enabled and decremented when 238 * the list of frames to transmit is traversed (or when 239 * the ready time for the queue expires). This counter 240 * must be non-zero for frames to be scheduled for 241 * transmission. The following controls disable bumping 242 * this counter under certain conditions. Typically this 243 * is used to gate frames based on the contents of another 244 * queue (e.g. CAB traffic may only follow a beacon frame). 245 * These are meaningful only when frames are scheduled 246 * with a non-ASAP policy (e.g. DBA-gated). 247 */ 248 HAL_TXQ_CBR_DIS_QEMPTY = 0x0080, /* disable on this q empty */ 249 HAL_TXQ_CBR_DIS_BEMPTY = 0x0100, /* disable on beacon q empty */ 250 251 /* 252 * Fragment burst backoff policy. Normally the no backoff 253 * is done after a successful transmission, the next fragment 254 * is sent at SIFS. If this flag is set backoff is done 255 * after each fragment, regardless whether it was ack'd or 256 * not, after the backoff count reaches zero a normal channel 257 * access procedure is done before the next transmit (i.e. 258 * wait AIFS instead of SIFS). 259 */ 260 HAL_TXQ_FRAG_BURST_BACKOFF_ENABLE = 0x00800000, 261 /* 262 * Disable post-tx backoff following each frame. 263 */ 264 HAL_TXQ_BACKOFF_DISABLE = 0x00010000, /* disable post backoff */ 265 /* 266 * DCU arbiter lockout control. This controls how 267 * lower priority tx queues are handled with respect to 268 * to a specific queue when multiple queues have frames 269 * to send. No lockout means lower priority queues arbitrate 270 * concurrently with this queue. Intra-frame lockout 271 * means lower priority queues are locked out until the 272 * current frame transmits (e.g. including backoffs and bursting). 273 * Global lockout means nothing lower can arbitrary so 274 * long as there is traffic activity on this queue (frames, 275 * backoff, etc). 276 */ 277 HAL_TXQ_ARB_LOCKOUT_INTRA = 0x00020000, /* intra-frame lockout */ 278 HAL_TXQ_ARB_LOCKOUT_GLOBAL = 0x00040000, /* full lockout s */ 279 280 HAL_TXQ_IGNORE_VIRTCOL = 0x00080000, /* ignore virt collisions */ 281 HAL_TXQ_SEQNUM_INC_DIS = 0x00100000, /* disable seqnum increment */ 282 } HAL_TX_QUEUE_FLAGS; 283 284 typedef struct { 285 uint32_t tqi_ver; /* hal TXQ version */ 286 HAL_TX_QUEUE_SUBTYPE tqi_subtype; /* subtype if applicable */ 287 HAL_TX_QUEUE_FLAGS tqi_qflags; /* flags (see above) */ 288 uint32_t tqi_priority; /* (not used) */ 289 uint32_t tqi_aifs; /* aifs */ 290 uint32_t tqi_cwmin; /* cwMin */ 291 uint32_t tqi_cwmax; /* cwMax */ 292 uint16_t tqi_shretry; /* rts retry limit */ 293 uint16_t tqi_lgretry; /* long retry limit (not used)*/ 294 uint32_t tqi_cbrPeriod; /* CBR period (us) */ 295 uint32_t tqi_cbrOverflowLimit; /* threshold for CBROVF int */ 296 uint32_t tqi_burstTime; /* max burst duration (us) */ 297 uint32_t tqi_readyTime; /* frame schedule time (us) */ 298 uint32_t tqi_compBuf; /* comp buffer phys addr */ 299 } HAL_TXQ_INFO; 300 301 #define HAL_TQI_NONVAL 0xffff 302 303 /* token to use for aifs, cwmin, cwmax */ 304 #define HAL_TXQ_USEDEFAULT ((uint32_t) -1) 305 306 /* compression definitions */ 307 #define HAL_COMP_BUF_MAX_SIZE 9216 /* 9K */ 308 #define HAL_COMP_BUF_ALIGN_SIZE 512 309 310 /* 311 * Transmit packet types. This belongs in ah_desc.h, but 312 * is here so we can give a proper type to various parameters 313 * (and not require everyone include the file). 314 * 315 * NB: These values are intentionally assigned for 316 * direct use when setting up h/w descriptors. 317 */ 318 typedef enum { 319 HAL_PKT_TYPE_NORMAL = 0, 320 HAL_PKT_TYPE_ATIM = 1, 321 HAL_PKT_TYPE_PSPOLL = 2, 322 HAL_PKT_TYPE_BEACON = 3, 323 HAL_PKT_TYPE_PROBE_RESP = 4, 324 HAL_PKT_TYPE_CHIRP = 5, 325 HAL_PKT_TYPE_GRP_POLL = 6, 326 HAL_PKT_TYPE_AMPDU = 7, 327 } HAL_PKT_TYPE; 328 329 /* Rx Filter Frame Types */ 330 typedef enum { 331 /* 332 * These bits correspond to AR_RX_FILTER for all chips. 333 * Not all bits are supported by all chips. 334 */ 335 HAL_RX_FILTER_UCAST = 0x00000001, /* Allow unicast frames */ 336 HAL_RX_FILTER_MCAST = 0x00000002, /* Allow multicast frames */ 337 HAL_RX_FILTER_BCAST = 0x00000004, /* Allow broadcast frames */ 338 HAL_RX_FILTER_CONTROL = 0x00000008, /* Allow control frames */ 339 HAL_RX_FILTER_BEACON = 0x00000010, /* Allow beacon frames */ 340 HAL_RX_FILTER_PROM = 0x00000020, /* Promiscuous mode */ 341 HAL_RX_FILTER_PROBEREQ = 0x00000080, /* Allow probe request frames */ 342 HAL_RX_FILTER_PHYERR = 0x00000100, /* Allow phy errors */ 343 HAL_RX_FILTER_COMPBAR = 0x00000400, /* Allow compressed BAR */ 344 HAL_RX_FILTER_COMP_BA = 0x00000800, /* Allow compressed blockack */ 345 HAL_RX_FILTER_PHYRADAR = 0x00002000, /* Allow phy radar errors */ 346 HAL_RX_FILTER_PSPOLL = 0x00004000, /* Allow PS-POLL frames */ 347 HAL_RX_FILTER_MCAST_BCAST_ALL = 0x00008000, 348 /* Allow all mcast/bcast frames */ 349 350 /* 351 * Magic RX filter flags that aren't targetting hardware bits 352 * but instead the HAL sets individual bits - eg PHYERR will result 353 * in OFDM/CCK timing error frames being received. 354 */ 355 HAL_RX_FILTER_BSSID = 0x40000000, /* Disable BSSID match */ 356 } HAL_RX_FILTER; 357 358 typedef enum { 359 HAL_PM_AWAKE = 0, 360 HAL_PM_FULL_SLEEP = 1, 361 HAL_PM_NETWORK_SLEEP = 2, 362 HAL_PM_UNDEFINED = 3 363 } HAL_POWER_MODE; 364 365 /* 366 * NOTE WELL: 367 * These are mapped to take advantage of the common locations for many of 368 * the bits on all of the currently supported MAC chips. This is to make 369 * the ISR as efficient as possible, while still abstracting HW differences. 370 * When new hardware breaks this commonality this enumerated type, as well 371 * as the HAL functions using it, must be modified. All values are directly 372 * mapped unless commented otherwise. 373 */ 374 typedef enum { 375 HAL_INT_RX = 0x00000001, /* Non-common mapping */ 376 HAL_INT_RXDESC = 0x00000002, 377 HAL_INT_RXNOFRM = 0x00000008, 378 HAL_INT_RXEOL = 0x00000010, 379 HAL_INT_RXORN = 0x00000020, 380 HAL_INT_TX = 0x00000040, /* Non-common mapping */ 381 HAL_INT_TXDESC = 0x00000080, 382 HAL_INT_TIM_TIMER= 0x00000100, 383 HAL_INT_TXURN = 0x00000800, 384 HAL_INT_MIB = 0x00001000, 385 HAL_INT_RXPHY = 0x00004000, 386 HAL_INT_RXKCM = 0x00008000, 387 HAL_INT_SWBA = 0x00010000, 388 HAL_INT_BMISS = 0x00040000, 389 HAL_INT_BNR = 0x00100000, 390 HAL_INT_TIM = 0x00200000, /* Non-common mapping */ 391 HAL_INT_DTIM = 0x00400000, /* Non-common mapping */ 392 HAL_INT_DTIMSYNC= 0x00800000, /* Non-common mapping */ 393 HAL_INT_GPIO = 0x01000000, 394 HAL_INT_CABEND = 0x02000000, /* Non-common mapping */ 395 HAL_INT_TSFOOR = 0x04000000, /* Non-common mapping */ 396 HAL_INT_TBTT = 0x08000000, /* Non-common mapping */ 397 HAL_INT_CST = 0x10000000, /* Non-common mapping */ 398 HAL_INT_GTT = 0x20000000, /* Non-common mapping */ 399 HAL_INT_FATAL = 0x40000000, /* Non-common mapping */ 400 #define HAL_INT_GLOBAL 0x80000000 /* Set/clear IER */ 401 HAL_INT_BMISC = HAL_INT_TIM 402 | HAL_INT_DTIM 403 | HAL_INT_DTIMSYNC 404 | HAL_INT_CABEND 405 | HAL_INT_TBTT, 406 407 /* Interrupt bits that map directly to ISR/IMR bits */ 408 HAL_INT_COMMON = HAL_INT_RXNOFRM 409 | HAL_INT_RXDESC 410 | HAL_INT_RXEOL 411 | HAL_INT_RXORN 412 | HAL_INT_TXDESC 413 | HAL_INT_TXURN 414 | HAL_INT_MIB 415 | HAL_INT_RXPHY 416 | HAL_INT_RXKCM 417 | HAL_INT_SWBA 418 | HAL_INT_BMISS 419 | HAL_INT_BNR 420 | HAL_INT_GPIO, 421 } HAL_INT; 422 423 typedef enum { 424 HAL_GPIO_MUX_OUTPUT = 0, 425 HAL_GPIO_MUX_PCIE_ATTENTION_LED = 1, 426 HAL_GPIO_MUX_PCIE_POWER_LED = 2, 427 HAL_GPIO_MUX_TX_FRAME = 3, 428 HAL_GPIO_MUX_RX_CLEAR_EXTERNAL = 4, 429 HAL_GPIO_MUX_MAC_NETWORK_LED = 5, 430 HAL_GPIO_MUX_MAC_POWER_LED = 6 431 } HAL_GPIO_MUX_TYPE; 432 433 typedef enum { 434 HAL_GPIO_INTR_LOW = 0, 435 HAL_GPIO_INTR_HIGH = 1, 436 HAL_GPIO_INTR_DISABLE = 2 437 } HAL_GPIO_INTR_TYPE; 438 439 typedef enum { 440 HAL_RFGAIN_INACTIVE = 0, 441 HAL_RFGAIN_READ_REQUESTED = 1, 442 HAL_RFGAIN_NEED_CHANGE = 2 443 } HAL_RFGAIN; 444 445 typedef uint16_t HAL_CTRY_CODE; /* country code */ 446 typedef uint16_t HAL_REG_DOMAIN; /* regulatory domain code */ 447 448 #define HAL_ANTENNA_MIN_MODE 0 449 #define HAL_ANTENNA_FIXED_A 1 450 #define HAL_ANTENNA_FIXED_B 2 451 #define HAL_ANTENNA_MAX_MODE 3 452 453 typedef struct { 454 uint32_t ackrcv_bad; 455 uint32_t rts_bad; 456 uint32_t rts_good; 457 uint32_t fcs_bad; 458 uint32_t beacons; 459 } HAL_MIB_STATS; 460 461 enum { 462 HAL_MODE_11A = 0x001, /* 11a channels */ 463 HAL_MODE_TURBO = 0x002, /* 11a turbo-only channels */ 464 HAL_MODE_11B = 0x004, /* 11b channels */ 465 HAL_MODE_PUREG = 0x008, /* 11g channels (OFDM only) */ 466 #ifdef notdef 467 HAL_MODE_11G = 0x010, /* 11g channels (OFDM/CCK) */ 468 #else 469 HAL_MODE_11G = 0x008, /* XXX historical */ 470 #endif 471 HAL_MODE_108G = 0x020, /* 11g+Turbo channels */ 472 HAL_MODE_108A = 0x040, /* 11a+Turbo channels */ 473 HAL_MODE_11A_HALF_RATE = 0x200, /* 11a half width channels */ 474 HAL_MODE_11A_QUARTER_RATE = 0x400, /* 11a quarter width channels */ 475 HAL_MODE_11G_HALF_RATE = 0x800, /* 11g half width channels */ 476 HAL_MODE_11G_QUARTER_RATE = 0x1000, /* 11g quarter width channels */ 477 HAL_MODE_11NG_HT20 = 0x008000, 478 HAL_MODE_11NA_HT20 = 0x010000, 479 HAL_MODE_11NG_HT40PLUS = 0x020000, 480 HAL_MODE_11NG_HT40MINUS = 0x040000, 481 HAL_MODE_11NA_HT40PLUS = 0x080000, 482 HAL_MODE_11NA_HT40MINUS = 0x100000, 483 HAL_MODE_ALL = 0xffffff 484 }; 485 486 typedef struct { 487 int rateCount; /* NB: for proper padding */ 488 uint8_t rateCodeToIndex[144]; /* back mapping */ 489 struct { 490 uint8_t valid; /* valid for rate control use */ 491 uint8_t phy; /* CCK/OFDM/XR */ 492 uint32_t rateKbps; /* transfer rate in kbs */ 493 uint8_t rateCode; /* rate for h/w descriptors */ 494 uint8_t shortPreamble; /* mask for enabling short 495 * preamble in CCK rate code */ 496 uint8_t dot11Rate; /* value for supported rates 497 * info element of MLME */ 498 uint8_t controlRate; /* index of next lower basic 499 * rate; used for dur. calcs */ 500 uint16_t lpAckDuration; /* long preamble ACK duration */ 501 uint16_t spAckDuration; /* short preamble ACK duration*/ 502 } info[32]; 503 } HAL_RATE_TABLE; 504 505 typedef struct { 506 u_int rs_count; /* number of valid entries */ 507 uint8_t rs_rates[32]; /* rates */ 508 } HAL_RATE_SET; 509 510 /* 511 * 802.11n specific structures and enums 512 */ 513 typedef enum { 514 HAL_CHAINTYPE_TX = 1, /* Tx chain type */ 515 HAL_CHAINTYPE_RX = 2, /* RX chain type */ 516 } HAL_CHAIN_TYPE; 517 518 typedef struct { 519 u_int Tries; 520 u_int Rate; 521 u_int PktDuration; 522 u_int ChSel; 523 u_int RateFlags; 524 #define HAL_RATESERIES_RTS_CTS 0x0001 /* use rts/cts w/this series */ 525 #define HAL_RATESERIES_2040 0x0002 /* use ext channel for series */ 526 #define HAL_RATESERIES_HALFGI 0x0004 /* use half-gi for series */ 527 } HAL_11N_RATE_SERIES; 528 529 typedef enum { 530 HAL_HT_MACMODE_20 = 0, /* 20 MHz operation */ 531 HAL_HT_MACMODE_2040 = 1, /* 20/40 MHz operation */ 532 } HAL_HT_MACMODE; 533 534 typedef enum { 535 HAL_HT_PHYMODE_20 = 0, /* 20 MHz operation */ 536 HAL_HT_PHYMODE_2040 = 1, /* 20/40 MHz operation */ 537 } HAL_HT_PHYMODE; 538 539 typedef enum { 540 HAL_HT_EXTPROTSPACING_20 = 0, /* 20 MHz spacing */ 541 HAL_HT_EXTPROTSPACING_25 = 1, /* 25 MHz spacing */ 542 } HAL_HT_EXTPROTSPACING; 543 544 545 typedef enum { 546 HAL_RX_CLEAR_CTL_LOW = 0x1, /* force control channel to appear busy */ 547 HAL_RX_CLEAR_EXT_LOW = 0x2, /* force extension channel to appear busy */ 548 } HAL_HT_RXCLEAR; 549 550 /* 551 * Antenna switch control. By default antenna selection 552 * enables multiple (2) antenna use. To force use of the 553 * A or B antenna only specify a fixed setting. Fixing 554 * the antenna will also disable any diversity support. 555 */ 556 typedef enum { 557 HAL_ANT_VARIABLE = 0, /* variable by programming */ 558 HAL_ANT_FIXED_A = 1, /* fixed antenna A */ 559 HAL_ANT_FIXED_B = 2, /* fixed antenna B */ 560 } HAL_ANT_SETTING; 561 562 typedef enum { 563 HAL_M_STA = 1, /* infrastructure station */ 564 HAL_M_IBSS = 0, /* IBSS (adhoc) station */ 565 HAL_M_HOSTAP = 6, /* Software Access Point */ 566 HAL_M_MONITOR = 8 /* Monitor mode */ 567 } HAL_OPMODE; 568 569 typedef struct { 570 uint8_t kv_type; /* one of HAL_CIPHER */ 571 uint8_t kv_pad; 572 uint16_t kv_len; /* length in bits */ 573 uint8_t kv_val[16]; /* enough for 128-bit keys */ 574 uint8_t kv_mic[8]; /* TKIP MIC key */ 575 uint8_t kv_txmic[8]; /* TKIP TX MIC key (optional) */ 576 } HAL_KEYVAL; 577 578 typedef enum { 579 HAL_CIPHER_WEP = 0, 580 HAL_CIPHER_AES_OCB = 1, 581 HAL_CIPHER_AES_CCM = 2, 582 HAL_CIPHER_CKIP = 3, 583 HAL_CIPHER_TKIP = 4, 584 HAL_CIPHER_CLR = 5, /* no encryption */ 585 586 HAL_CIPHER_MIC = 127 /* TKIP-MIC, not a cipher */ 587 } HAL_CIPHER; 588 589 enum { 590 HAL_SLOT_TIME_6 = 6, /* NB: for turbo mode */ 591 HAL_SLOT_TIME_9 = 9, 592 HAL_SLOT_TIME_20 = 20, 593 }; 594 595 /* 596 * Per-station beacon timer state. Note that the specified 597 * beacon interval (given in TU's) can also include flags 598 * to force a TSF reset and to enable the beacon xmit logic. 599 * If bs_cfpmaxduration is non-zero the hardware is setup to 600 * coexist with a PCF-capable AP. 601 */ 602 typedef struct { 603 uint32_t bs_nexttbtt; /* next beacon in TU */ 604 uint32_t bs_nextdtim; /* next DTIM in TU */ 605 uint32_t bs_intval; /* beacon interval+flags */ 606 #define HAL_BEACON_PERIOD 0x0000ffff /* beacon interval period */ 607 #define HAL_BEACON_ENA 0x00800000 /* beacon xmit enable */ 608 #define HAL_BEACON_RESET_TSF 0x01000000 /* clear TSF */ 609 uint32_t bs_dtimperiod; 610 uint16_t bs_cfpperiod; /* CFP period in TU */ 611 uint16_t bs_cfpmaxduration; /* max CFP duration in TU */ 612 uint32_t bs_cfpnext; /* next CFP in TU */ 613 uint16_t bs_timoffset; /* byte offset to TIM bitmap */ 614 uint16_t bs_bmissthreshold; /* beacon miss threshold */ 615 uint32_t bs_sleepduration; /* max sleep duration */ 616 } HAL_BEACON_STATE; 617 618 /* 619 * Like HAL_BEACON_STATE but for non-station mode setup. 620 * NB: see above flag definitions for bt_intval. 621 */ 622 typedef struct { 623 uint32_t bt_intval; /* beacon interval+flags */ 624 uint32_t bt_nexttbtt; /* next beacon in TU */ 625 uint32_t bt_nextatim; /* next ATIM in TU */ 626 uint32_t bt_nextdba; /* next DBA in 1/8th TU */ 627 uint32_t bt_nextswba; /* next SWBA in 1/8th TU */ 628 uint32_t bt_flags; /* timer enables */ 629 #define HAL_BEACON_TBTT_EN 0x00000001 630 #define HAL_BEACON_DBA_EN 0x00000002 631 #define HAL_BEACON_SWBA_EN 0x00000004 632 } HAL_BEACON_TIMERS; 633 634 /* 635 * Per-node statistics maintained by the driver for use in 636 * optimizing signal quality and other operational aspects. 637 */ 638 typedef struct { 639 uint32_t ns_avgbrssi; /* average beacon rssi */ 640 uint32_t ns_avgrssi; /* average data rssi */ 641 uint32_t ns_avgtxrssi; /* average tx rssi */ 642 } HAL_NODE_STATS; 643 644 #define HAL_RSSI_EP_MULTIPLIER (1<<7) /* pow2 to optimize out * and / */ 645 646 struct ath_desc; 647 struct ath_tx_status; 648 struct ath_rx_status; 649 struct ieee80211_channel; 650 651 /* 652 * This is a channel survey sample entry. 653 * 654 * The AR5212 ANI routines fill these samples. The ANI code then uses it 655 * when calculating listen time; it is also exported via a diagnostic 656 * API. 657 */ 658 typedef struct { 659 uint32_t seq_num; 660 uint32_t tx_busy; 661 uint32_t rx_busy; 662 uint32_t chan_busy; 663 uint32_t cycle_count; 664 } HAL_SURVEY_SAMPLE; 665 666 /* 667 * This provides 3.2 seconds of sample space given an 668 * ANI time of 1/10th of a second. This may not be enough! 669 */ 670 #define CHANNEL_SURVEY_SAMPLE_COUNT 32 671 672 typedef struct { 673 HAL_SURVEY_SAMPLE samples[CHANNEL_SURVEY_SAMPLE_COUNT]; 674 uint32_t cur_sample; /* current sample in sequence */ 675 uint32_t cur_seq; /* current sequence number */ 676 } HAL_CHANNEL_SURVEY; 677 678 /* 679 * ANI commands. 680 * 681 * These are used both internally and externally via the diagnostic 682 * API. 683 * 684 * Note that this is NOT the ANI commands being used via the INTMIT 685 * capability - that has a different mapping for some reason. 686 */ 687 typedef enum { 688 HAL_ANI_PRESENT = 0, /* is ANI support present */ 689 HAL_ANI_NOISE_IMMUNITY_LEVEL = 1, /* set level */ 690 HAL_ANI_OFDM_WEAK_SIGNAL_DETECTION = 2, /* enable/disable */ 691 HAL_ANI_CCK_WEAK_SIGNAL_THR = 3, /* enable/disable */ 692 HAL_ANI_FIRSTEP_LEVEL = 4, /* set level */ 693 HAL_ANI_SPUR_IMMUNITY_LEVEL = 5, /* set level */ 694 HAL_ANI_MODE = 6, /* 0 => manual, 1 => auto (XXX do not change) */ 695 HAL_ANI_PHYERR_RESET = 7, /* reset phy error stats */ 696 } HAL_ANI_CMD; 697 698 /* 699 * This is the layout of the ANI INTMIT capability. 700 * 701 * Notice that the command values differ to HAL_ANI_CMD. 702 */ 703 typedef enum { 704 HAL_CAP_INTMIT_PRESENT = 0, 705 HAL_CAP_INTMIT_ENABLE = 1, 706 HAL_CAP_INTMIT_NOISE_IMMUNITY_LEVEL = 2, 707 HAL_CAP_INTMIT_OFDM_WEAK_SIGNAL_LEVEL = 3, 708 HAL_CAP_INTMIT_CCK_WEAK_SIGNAL_THR = 4, 709 HAL_CAP_INTMIT_FIRSTEP_LEVEL = 5, 710 HAL_CAP_INTMIT_SPUR_IMMUNITY_LEVEL = 6 711 } HAL_CAP_INTMIT_CMD; 712 713 typedef struct { 714 int32_t pe_firpwr; /* FIR pwr out threshold */ 715 int32_t pe_rrssi; /* Radar rssi thresh */ 716 int32_t pe_height; /* Pulse height thresh */ 717 int32_t pe_prssi; /* Pulse rssi thresh */ 718 int32_t pe_inband; /* Inband thresh */ 719 720 /* The following params are only for AR5413 and later */ 721 u_int32_t pe_relpwr; /* Relative power threshold in 0.5dB steps */ 722 u_int32_t pe_relstep; /* Pulse Relative step threshold in 0.5dB steps */ 723 u_int32_t pe_maxlen; /* Max length of radar sign in 0.8us units */ 724 int32_t pe_usefir128; /* Use the average in-band power measured over 128 cycles */ 725 int32_t pe_blockradar; /* 726 * Enable to block radar check if pkt detect is done via OFDM 727 * weak signal detect or pkt is detected immediately after tx 728 * to rx transition 729 */ 730 int32_t pe_enmaxrssi; /* 731 * Enable to use the max rssi instead of the last rssi during 732 * fine gain changes for radar detection 733 */ 734 int32_t pe_extchannel; /* Enable DFS on ext channel */ 735 int32_t pe_enabled; /* Whether radar detection is enabled */ 736 int32_t pe_enrelpwr; 737 int32_t pe_en_relstep_check; 738 } HAL_PHYERR_PARAM; 739 740 #define HAL_PHYERR_PARAM_NOVAL 65535 741 742 /* 743 * DFS operating mode flags. 744 */ 745 typedef enum { 746 HAL_DFS_UNINIT_DOMAIN = 0, /* Uninitialized dfs domain */ 747 HAL_DFS_FCC_DOMAIN = 1, /* FCC3 dfs domain */ 748 HAL_DFS_ETSI_DOMAIN = 2, /* ETSI dfs domain */ 749 HAL_DFS_MKK4_DOMAIN = 3, /* Japan dfs domain */ 750 } HAL_DFS_DOMAIN; 751 752 /* 753 * Flag for setting QUIET period 754 */ 755 typedef enum { 756 HAL_QUIET_DISABLE = 0x0, 757 HAL_QUIET_ENABLE = 0x1, 758 HAL_QUIET_ADD_CURRENT_TSF = 0x2, /* add current TSF to next_start offset */ 759 HAL_QUIET_ADD_SWBA_RESP_TIME = 0x4, /* add beacon response time to next_start offset */ 760 } HAL_QUIET_FLAG; 761 762 #define HAL_DFS_EVENT_PRICH 0x0000001 763 #define HAL_DFS_EVENT_EXTCH 0x0000002 764 #define HAL_DFS_EVENT_EXTEARLY 0x0000004 765 #define HAL_DFS_EVENT_ISDC 0x0000008 766 767 struct hal_dfs_event { 768 uint64_t re_full_ts; /* 64-bit full timestamp from interrupt time */ 769 uint32_t re_ts; /* Original 15 bit recv timestamp */ 770 uint8_t re_rssi; /* rssi of radar event */ 771 uint8_t re_dur; /* duration of radar pulse */ 772 uint32_t re_flags; /* Flags (see above) */ 773 }; 774 typedef struct hal_dfs_event HAL_DFS_EVENT; 775 776 typedef struct 777 { 778 int ah_debug; /* only used if AH_DEBUG is defined */ 779 int ah_ar5416_biasadj; /* enable AR2133 radio specific bias fiddling */ 780 781 /* NB: these are deprecated; they exist for now for compatibility */ 782 int ah_dma_beacon_response_time;/* in TU's */ 783 int ah_sw_beacon_response_time; /* in TU's */ 784 int ah_additional_swba_backoff; /* in TU's */ 785 int ah_force_full_reset; /* force full chip reset rather then warm reset */ 786 int ah_serialise_reg_war; /* force serialisation of register IO */ 787 } HAL_OPS_CONFIG; 788 789 /* 790 * Hardware Access Layer (HAL) API. 791 * 792 * Clients of the HAL call ath_hal_attach to obtain a reference to an 793 * ath_hal structure for use with the device. Hardware-related operations 794 * that follow must call back into the HAL through interface, supplying 795 * the reference as the first parameter. Note that before using the 796 * reference returned by ath_hal_attach the caller should verify the 797 * ABI version number. 798 */ 799 struct ath_hal { 800 uint32_t ah_magic; /* consistency check magic number */ 801 uint16_t ah_devid; /* PCI device ID */ 802 uint16_t ah_subvendorid; /* PCI subvendor ID */ 803 HAL_SOFTC ah_sc; /* back pointer to driver/os state */ 804 HAL_BUS_TAG ah_st; /* params for register r+w */ 805 HAL_BUS_HANDLE ah_sh; 806 HAL_CTRY_CODE ah_countryCode; 807 808 uint32_t ah_macVersion; /* MAC version id */ 809 uint16_t ah_macRev; /* MAC revision */ 810 uint16_t ah_phyRev; /* PHY revision */ 811 /* NB: when only one radio is present the rev is in 5Ghz */ 812 uint16_t ah_analog5GhzRev;/* 5GHz radio revision */ 813 uint16_t ah_analog2GhzRev;/* 2GHz radio revision */ 814 815 uint16_t *ah_eepromdata; /* eeprom buffer, if needed */ 816 817 uint32_t ah_intrstate[8]; /* last int state */ 818 819 HAL_OPS_CONFIG ah_config; 820 const HAL_RATE_TABLE *__ahdecl(*ah_getRateTable)(struct ath_hal *, 821 u_int mode); 822 void __ahdecl(*ah_detach)(struct ath_hal*); 823 824 /* Reset functions */ 825 HAL_BOOL __ahdecl(*ah_reset)(struct ath_hal *, HAL_OPMODE, 826 struct ieee80211_channel *, 827 HAL_BOOL bChannelChange, HAL_STATUS *status); 828 HAL_BOOL __ahdecl(*ah_phyDisable)(struct ath_hal *); 829 HAL_BOOL __ahdecl(*ah_disable)(struct ath_hal *); 830 void __ahdecl(*ah_configPCIE)(struct ath_hal *, HAL_BOOL restore); 831 void __ahdecl(*ah_disablePCIE)(struct ath_hal *); 832 void __ahdecl(*ah_setPCUConfig)(struct ath_hal *); 833 HAL_BOOL __ahdecl(*ah_perCalibration)(struct ath_hal*, 834 struct ieee80211_channel *, HAL_BOOL *); 835 HAL_BOOL __ahdecl(*ah_perCalibrationN)(struct ath_hal *, 836 struct ieee80211_channel *, u_int chainMask, 837 HAL_BOOL longCal, HAL_BOOL *isCalDone); 838 HAL_BOOL __ahdecl(*ah_resetCalValid)(struct ath_hal *, 839 const struct ieee80211_channel *); 840 HAL_BOOL __ahdecl(*ah_setTxPower)(struct ath_hal *, 841 const struct ieee80211_channel *, uint16_t *); 842 HAL_BOOL __ahdecl(*ah_setTxPowerLimit)(struct ath_hal *, uint32_t); 843 HAL_BOOL __ahdecl(*ah_setBoardValues)(struct ath_hal *, 844 const struct ieee80211_channel *); 845 846 /* Transmit functions */ 847 HAL_BOOL __ahdecl(*ah_updateTxTrigLevel)(struct ath_hal*, 848 HAL_BOOL incTrigLevel); 849 int __ahdecl(*ah_setupTxQueue)(struct ath_hal *, HAL_TX_QUEUE, 850 const HAL_TXQ_INFO *qInfo); 851 HAL_BOOL __ahdecl(*ah_setTxQueueProps)(struct ath_hal *, int q, 852 const HAL_TXQ_INFO *qInfo); 853 HAL_BOOL __ahdecl(*ah_getTxQueueProps)(struct ath_hal *, int q, 854 HAL_TXQ_INFO *qInfo); 855 HAL_BOOL __ahdecl(*ah_releaseTxQueue)(struct ath_hal *ah, u_int q); 856 HAL_BOOL __ahdecl(*ah_resetTxQueue)(struct ath_hal *ah, u_int q); 857 uint32_t __ahdecl(*ah_getTxDP)(struct ath_hal*, u_int); 858 HAL_BOOL __ahdecl(*ah_setTxDP)(struct ath_hal*, u_int, uint32_t txdp); 859 uint32_t __ahdecl(*ah_numTxPending)(struct ath_hal *, u_int q); 860 HAL_BOOL __ahdecl(*ah_startTxDma)(struct ath_hal*, u_int); 861 HAL_BOOL __ahdecl(*ah_stopTxDma)(struct ath_hal*, u_int); 862 HAL_BOOL __ahdecl(*ah_setupTxDesc)(struct ath_hal *, struct ath_desc *, 863 u_int pktLen, u_int hdrLen, 864 HAL_PKT_TYPE type, u_int txPower, 865 u_int txRate0, u_int txTries0, 866 u_int keyIx, u_int antMode, u_int flags, 867 u_int rtsctsRate, u_int rtsctsDuration, 868 u_int compicvLen, u_int compivLen, 869 u_int comp); 870 HAL_BOOL __ahdecl(*ah_setupXTxDesc)(struct ath_hal *, struct ath_desc*, 871 u_int txRate1, u_int txTries1, 872 u_int txRate2, u_int txTries2, 873 u_int txRate3, u_int txTries3); 874 HAL_BOOL __ahdecl(*ah_fillTxDesc)(struct ath_hal *, struct ath_desc *, 875 u_int segLen, HAL_BOOL firstSeg, 876 HAL_BOOL lastSeg, const struct ath_desc *); 877 HAL_STATUS __ahdecl(*ah_procTxDesc)(struct ath_hal *, 878 struct ath_desc *, struct ath_tx_status *); 879 void __ahdecl(*ah_getTxIntrQueue)(struct ath_hal *, uint32_t *); 880 void __ahdecl(*ah_reqTxIntrDesc)(struct ath_hal *, struct ath_desc*); 881 HAL_BOOL __ahdecl(*ah_getTxCompletionRates)(struct ath_hal *, 882 const struct ath_desc *ds, int *rates, int *tries); 883 884 /* Receive Functions */ 885 uint32_t __ahdecl(*ah_getRxDP)(struct ath_hal*); 886 void __ahdecl(*ah_setRxDP)(struct ath_hal*, uint32_t rxdp); 887 void __ahdecl(*ah_enableReceive)(struct ath_hal*); 888 HAL_BOOL __ahdecl(*ah_stopDmaReceive)(struct ath_hal*); 889 void __ahdecl(*ah_startPcuReceive)(struct ath_hal*); 890 void __ahdecl(*ah_stopPcuReceive)(struct ath_hal*); 891 void __ahdecl(*ah_setMulticastFilter)(struct ath_hal*, 892 uint32_t filter0, uint32_t filter1); 893 HAL_BOOL __ahdecl(*ah_setMulticastFilterIndex)(struct ath_hal*, 894 uint32_t index); 895 HAL_BOOL __ahdecl(*ah_clrMulticastFilterIndex)(struct ath_hal*, 896 uint32_t index); 897 uint32_t __ahdecl(*ah_getRxFilter)(struct ath_hal*); 898 void __ahdecl(*ah_setRxFilter)(struct ath_hal*, uint32_t); 899 HAL_BOOL __ahdecl(*ah_setupRxDesc)(struct ath_hal *, struct ath_desc *, 900 uint32_t size, u_int flags); 901 HAL_STATUS __ahdecl(*ah_procRxDesc)(struct ath_hal *, 902 struct ath_desc *, uint32_t phyAddr, 903 struct ath_desc *next, uint64_t tsf, 904 struct ath_rx_status *); 905 void __ahdecl(*ah_rxMonitor)(struct ath_hal *, 906 const HAL_NODE_STATS *, 907 const struct ieee80211_channel *); 908 void __ahdecl(*ah_aniPoll)(struct ath_hal *, 909 const struct ieee80211_channel *); 910 void __ahdecl(*ah_procMibEvent)(struct ath_hal *, 911 const HAL_NODE_STATS *); 912 void __ahdecl(*ah_rxAntCombDiversity)(struct ath_hal *, 913 struct ath_rx_status *, 914 unsigned long, int); 915 916 /* Misc Functions */ 917 HAL_STATUS __ahdecl(*ah_getCapability)(struct ath_hal *, 918 HAL_CAPABILITY_TYPE, uint32_t capability, 919 uint32_t *result); 920 HAL_BOOL __ahdecl(*ah_setCapability)(struct ath_hal *, 921 HAL_CAPABILITY_TYPE, uint32_t capability, 922 uint32_t setting, HAL_STATUS *); 923 HAL_BOOL __ahdecl(*ah_getDiagState)(struct ath_hal *, int request, 924 const void *args, uint32_t argsize, 925 void **result, uint32_t *resultsize); 926 void __ahdecl(*ah_getMacAddress)(struct ath_hal *, uint8_t *); 927 HAL_BOOL __ahdecl(*ah_setMacAddress)(struct ath_hal *, const uint8_t*); 928 void __ahdecl(*ah_getBssIdMask)(struct ath_hal *, uint8_t *); 929 HAL_BOOL __ahdecl(*ah_setBssIdMask)(struct ath_hal *, const uint8_t*); 930 HAL_BOOL __ahdecl(*ah_setRegulatoryDomain)(struct ath_hal*, 931 uint16_t, HAL_STATUS *); 932 void __ahdecl(*ah_setLedState)(struct ath_hal*, HAL_LED_STATE); 933 void __ahdecl(*ah_writeAssocid)(struct ath_hal*, 934 const uint8_t *bssid, uint16_t assocId); 935 HAL_BOOL __ahdecl(*ah_gpioCfgOutput)(struct ath_hal *, 936 uint32_t gpio, HAL_GPIO_MUX_TYPE); 937 HAL_BOOL __ahdecl(*ah_gpioCfgInput)(struct ath_hal *, uint32_t gpio); 938 uint32_t __ahdecl(*ah_gpioGet)(struct ath_hal *, uint32_t gpio); 939 HAL_BOOL __ahdecl(*ah_gpioSet)(struct ath_hal *, 940 uint32_t gpio, uint32_t val); 941 void __ahdecl(*ah_gpioSetIntr)(struct ath_hal*, u_int, uint32_t); 942 uint32_t __ahdecl(*ah_getTsf32)(struct ath_hal*); 943 uint64_t __ahdecl(*ah_getTsf64)(struct ath_hal*); 944 void __ahdecl(*ah_resetTsf)(struct ath_hal*); 945 HAL_BOOL __ahdecl(*ah_detectCardPresent)(struct ath_hal*); 946 void __ahdecl(*ah_updateMibCounters)(struct ath_hal*, 947 HAL_MIB_STATS*); 948 HAL_RFGAIN __ahdecl(*ah_getRfGain)(struct ath_hal*); 949 u_int __ahdecl(*ah_getDefAntenna)(struct ath_hal*); 950 void __ahdecl(*ah_setDefAntenna)(struct ath_hal*, u_int); 951 HAL_ANT_SETTING __ahdecl(*ah_getAntennaSwitch)(struct ath_hal*); 952 HAL_BOOL __ahdecl(*ah_setAntennaSwitch)(struct ath_hal*, 953 HAL_ANT_SETTING); 954 HAL_BOOL __ahdecl(*ah_setSifsTime)(struct ath_hal*, u_int); 955 u_int __ahdecl(*ah_getSifsTime)(struct ath_hal*); 956 HAL_BOOL __ahdecl(*ah_setSlotTime)(struct ath_hal*, u_int); 957 u_int __ahdecl(*ah_getSlotTime)(struct ath_hal*); 958 HAL_BOOL __ahdecl(*ah_setAckTimeout)(struct ath_hal*, u_int); 959 u_int __ahdecl(*ah_getAckTimeout)(struct ath_hal*); 960 HAL_BOOL __ahdecl(*ah_setAckCTSRate)(struct ath_hal*, u_int); 961 u_int __ahdecl(*ah_getAckCTSRate)(struct ath_hal*); 962 HAL_BOOL __ahdecl(*ah_setCTSTimeout)(struct ath_hal*, u_int); 963 u_int __ahdecl(*ah_getCTSTimeout)(struct ath_hal*); 964 HAL_BOOL __ahdecl(*ah_setDecompMask)(struct ath_hal*, uint16_t, int); 965 void __ahdecl(*ah_setCoverageClass)(struct ath_hal*, uint8_t, int); 966 HAL_STATUS __ahdecl(*ah_setQuiet)(struct ath_hal *ah, uint32_t period, 967 uint32_t duration, uint32_t nextStart, 968 HAL_QUIET_FLAG flag); 969 970 /* DFS functions */ 971 void __ahdecl(*ah_enableDfs)(struct ath_hal *ah, 972 HAL_PHYERR_PARAM *pe); 973 void __ahdecl(*ah_getDfsThresh)(struct ath_hal *ah, 974 HAL_PHYERR_PARAM *pe); 975 HAL_BOOL __ahdecl(*ah_procRadarEvent)(struct ath_hal *ah, 976 struct ath_rx_status *rxs, uint64_t fulltsf, 977 const char *buf, HAL_DFS_EVENT *event); 978 HAL_BOOL __ahdecl(*ah_isFastClockEnabled)(struct ath_hal *ah); 979 980 /* Key Cache Functions */ 981 uint32_t __ahdecl(*ah_getKeyCacheSize)(struct ath_hal*); 982 HAL_BOOL __ahdecl(*ah_resetKeyCacheEntry)(struct ath_hal*, uint16_t); 983 HAL_BOOL __ahdecl(*ah_isKeyCacheEntryValid)(struct ath_hal *, 984 uint16_t); 985 HAL_BOOL __ahdecl(*ah_setKeyCacheEntry)(struct ath_hal*, 986 uint16_t, const HAL_KEYVAL *, 987 const uint8_t *, int); 988 HAL_BOOL __ahdecl(*ah_setKeyCacheEntryMac)(struct ath_hal*, 989 uint16_t, const uint8_t *); 990 991 /* Power Management Functions */ 992 HAL_BOOL __ahdecl(*ah_setPowerMode)(struct ath_hal*, 993 HAL_POWER_MODE mode, int setChip); 994 HAL_POWER_MODE __ahdecl(*ah_getPowerMode)(struct ath_hal*); 995 int16_t __ahdecl(*ah_getChanNoise)(struct ath_hal *, 996 const struct ieee80211_channel *); 997 998 /* Beacon Management Functions */ 999 void __ahdecl(*ah_setBeaconTimers)(struct ath_hal*, 1000 const HAL_BEACON_TIMERS *); 1001 /* NB: deprecated, use ah_setBeaconTimers instead */ 1002 void __ahdecl(*ah_beaconInit)(struct ath_hal *, 1003 uint32_t nexttbtt, uint32_t intval); 1004 void __ahdecl(*ah_setStationBeaconTimers)(struct ath_hal*, 1005 const HAL_BEACON_STATE *); 1006 void __ahdecl(*ah_resetStationBeaconTimers)(struct ath_hal*); 1007 uint64_t __ahdecl(*ah_getNextTBTT)(struct ath_hal *); 1008 1009 /* 802.11n Functions */ 1010 HAL_BOOL __ahdecl(*ah_chainTxDesc)(struct ath_hal *, 1011 struct ath_desc *, u_int, u_int, HAL_PKT_TYPE, 1012 u_int, HAL_CIPHER, uint8_t, u_int, HAL_BOOL, 1013 HAL_BOOL, HAL_BOOL); 1014 HAL_BOOL __ahdecl(*ah_setupFirstTxDesc)(struct ath_hal *, 1015 struct ath_desc *, u_int, u_int, u_int, 1016 u_int, u_int, u_int, u_int, u_int); 1017 HAL_BOOL __ahdecl(*ah_setupLastTxDesc)(struct ath_hal *, 1018 struct ath_desc *, const struct ath_desc *); 1019 void __ahdecl(*ah_set11nRateScenario)(struct ath_hal *, 1020 struct ath_desc *, u_int, u_int, 1021 HAL_11N_RATE_SERIES [], u_int, u_int); 1022 void __ahdecl(*ah_set11nAggrFirst)(struct ath_hal *, 1023 struct ath_desc *, u_int, u_int); 1024 void __ahdecl(*ah_set11nAggrMiddle)(struct ath_hal *, 1025 struct ath_desc *, u_int); 1026 void __ahdecl(*ah_set11nAggrLast)(struct ath_hal *, 1027 struct ath_desc *); 1028 void __ahdecl(*ah_clr11nAggr)(struct ath_hal *, 1029 struct ath_desc *); 1030 void __ahdecl(*ah_set11nBurstDuration)(struct ath_hal *, 1031 struct ath_desc *, u_int); 1032 uint32_t __ahdecl(*ah_get_mib_cycle_counts_pct) (struct ath_hal *, 1033 uint32_t *, uint32_t *, uint32_t *, uint32_t *); 1034 1035 uint32_t __ahdecl(*ah_get11nExtBusy)(struct ath_hal *); 1036 void __ahdecl(*ah_set11nMac2040)(struct ath_hal *, 1037 HAL_HT_MACMODE); 1038 HAL_HT_RXCLEAR __ahdecl(*ah_get11nRxClear)(struct ath_hal *ah); 1039 void __ahdecl(*ah_set11nRxClear)(struct ath_hal *, 1040 HAL_HT_RXCLEAR); 1041 1042 /* Interrupt functions */ 1043 HAL_BOOL __ahdecl(*ah_isInterruptPending)(struct ath_hal*); 1044 HAL_BOOL __ahdecl(*ah_getPendingInterrupts)(struct ath_hal*, HAL_INT*); 1045 HAL_INT __ahdecl(*ah_getInterrupts)(struct ath_hal*); 1046 HAL_INT __ahdecl(*ah_setInterrupts)(struct ath_hal*, HAL_INT); 1047 }; 1048 1049 /* 1050 * Check the PCI vendor ID and device ID against Atheros' values 1051 * and return a printable description for any Atheros hardware. 1052 * AH_NULL is returned if the ID's do not describe Atheros hardware. 1053 */ 1054 extern const char *__ahdecl ath_hal_probe(uint16_t vendorid, uint16_t devid); 1055 1056 /* 1057 * Attach the HAL for use with the specified device. The device is 1058 * defined by the PCI device ID. The caller provides an opaque pointer 1059 * to an upper-layer data structure (HAL_SOFTC) that is stored in the 1060 * HAL state block for later use. Hardware register accesses are done 1061 * using the specified bus tag and handle. On successful return a 1062 * reference to a state block is returned that must be supplied in all 1063 * subsequent HAL calls. Storage associated with this reference is 1064 * dynamically allocated and must be freed by calling the ah_detach 1065 * method when the client is done. If the attach operation fails a 1066 * null (AH_NULL) reference will be returned and a status code will 1067 * be returned if the status parameter is non-zero. 1068 */ 1069 extern struct ath_hal * __ahdecl ath_hal_attach(uint16_t devid, HAL_SOFTC, 1070 HAL_BUS_TAG, HAL_BUS_HANDLE, uint16_t *eepromdata, HAL_STATUS* status); 1071 1072 extern const char *ath_hal_mac_name(struct ath_hal *); 1073 extern const char *ath_hal_rf_name(struct ath_hal *); 1074 1075 /* 1076 * Regulatory interfaces. Drivers should use ath_hal_init_channels to 1077 * request a set of channels for a particular country code and/or 1078 * regulatory domain. If CTRY_DEFAULT and SKU_NONE are specified then 1079 * this list is constructed according to the contents of the EEPROM. 1080 * ath_hal_getchannels acts similarly but does not alter the operating 1081 * state; this can be used to collect information for a particular 1082 * regulatory configuration. Finally ath_hal_set_channels installs a 1083 * channel list constructed outside the driver. The HAL will adopt the 1084 * channel list and setup internal state according to the specified 1085 * regulatory configuration (e.g. conformance test limits). 1086 * 1087 * For all interfaces the channel list is returned in the supplied array. 1088 * maxchans defines the maximum size of this array. nchans contains the 1089 * actual number of channels returned. If a problem occurred then a 1090 * status code != HAL_OK is returned. 1091 */ 1092 struct ieee80211_channel; 1093 1094 /* 1095 * Return a list of channels according to the specified regulatory. 1096 */ 1097 extern HAL_STATUS __ahdecl ath_hal_getchannels(struct ath_hal *, 1098 struct ieee80211_channel *chans, u_int maxchans, int *nchans, 1099 u_int modeSelect, HAL_CTRY_CODE cc, HAL_REG_DOMAIN regDmn, 1100 HAL_BOOL enableExtendedChannels); 1101 1102 /* 1103 * Return a list of channels and install it as the current operating 1104 * regulatory list. 1105 */ 1106 extern HAL_STATUS __ahdecl ath_hal_init_channels(struct ath_hal *, 1107 struct ieee80211_channel *chans, u_int maxchans, int *nchans, 1108 u_int modeSelect, HAL_CTRY_CODE cc, HAL_REG_DOMAIN rd, 1109 HAL_BOOL enableExtendedChannels); 1110 1111 /* 1112 * Install the list of channels as the current operating regulatory 1113 * and setup related state according to the country code and sku. 1114 */ 1115 extern HAL_STATUS __ahdecl ath_hal_set_channels(struct ath_hal *, 1116 struct ieee80211_channel *chans, int nchans, 1117 HAL_CTRY_CODE cc, HAL_REG_DOMAIN regDmn); 1118 1119 /* 1120 * Fetch the ctl/ext noise floor values reported by a MIMO 1121 * radio. Returns 1 for valid results, 0 for invalid channel. 1122 */ 1123 extern int __ahdecl ath_hal_get_mimo_chan_noise(struct ath_hal *ah, 1124 const struct ieee80211_channel *chan, int16_t *nf_ctl, 1125 int16_t *nf_ext); 1126 1127 /* 1128 * Calibrate noise floor data following a channel scan or similar. 1129 * This must be called prior retrieving noise floor data. 1130 */ 1131 extern void __ahdecl ath_hal_process_noisefloor(struct ath_hal *ah); 1132 1133 /* 1134 * Return bit mask of wireless modes supported by the hardware. 1135 */ 1136 extern u_int __ahdecl ath_hal_getwirelessmodes(struct ath_hal*); 1137 1138 /* 1139 * Calculate the packet TX time for a legacy or 11n frame 1140 */ 1141 extern uint32_t __ahdecl ath_hal_pkt_txtime(struct ath_hal *ah, 1142 const HAL_RATE_TABLE *rates, uint32_t frameLen, 1143 uint16_t rateix, HAL_BOOL isht40, HAL_BOOL shortPreamble); 1144 1145 /* 1146 * Calculate the duration of an 11n frame. 1147 */ 1148 extern uint32_t __ahdecl ath_computedur_ht(uint32_t frameLen, uint16_t rate, 1149 int streams, HAL_BOOL isht40, HAL_BOOL isShortGI); 1150 1151 /* 1152 * Calculate the transmit duration of a legacy frame. 1153 */ 1154 extern uint16_t __ahdecl ath_hal_computetxtime(struct ath_hal *, 1155 const HAL_RATE_TABLE *rates, uint32_t frameLen, 1156 uint16_t rateix, HAL_BOOL shortPreamble); 1157 1158 /* 1159 * Adjust the TSF. 1160 */ 1161 extern void __ahdecl ath_hal_adjusttsf(struct ath_hal *ah, int32_t tsfdelta); 1162 1163 /* 1164 * Enable or disable CCA. 1165 */ 1166 void __ahdecl ath_hal_setcca(struct ath_hal *ah, int ena); 1167 1168 /* 1169 * Get CCA setting. 1170 */ 1171 int __ahdecl ath_hal_getcca(struct ath_hal *ah); 1172 1173 /* 1174 * Read EEPROM data from ah_eepromdata 1175 */ 1176 HAL_BOOL __ahdecl ath_hal_EepromDataRead(struct ath_hal *ah, 1177 u_int off, uint16_t *data); 1178 1179 #endif /* _ATH_AH_H_ */ 1180