1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 1998 - 2008 Søren Schmidt <sos@FreeBSD.org> 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer, 12 * without modification, immediately at the beginning of the file. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 */ 28 29 #include <sys/cdefs.h> 30 #include <sys/param.h> 31 #include <sys/module.h> 32 #include <sys/systm.h> 33 #include <sys/kernel.h> 34 #include <sys/ata.h> 35 #include <sys/bus.h> 36 #include <sys/endian.h> 37 #include <sys/malloc.h> 38 #include <sys/lock.h> 39 #include <sys/mutex.h> 40 #include <sys/sema.h> 41 #include <sys/taskqueue.h> 42 #include <vm/uma.h> 43 #include <machine/stdarg.h> 44 #include <machine/resource.h> 45 #include <machine/bus.h> 46 #include <sys/rman.h> 47 #include <dev/pci/pcivar.h> 48 #include <dev/pci/pcireg.h> 49 #include <dev/ata/ata-all.h> 50 #include <dev/ata/ata-pci.h> 51 #include <ata_if.h> 52 53 /* local prototypes */ 54 static int ata_highpoint_chipinit(device_t dev); 55 static int ata_highpoint_ch_attach(device_t dev); 56 static int ata_highpoint_setmode(device_t dev, int target, int mode); 57 static int ata_highpoint_check_80pin(device_t dev, int mode); 58 59 /* misc defines */ 60 #define HPT_366 0 61 #define HPT_370 1 62 #define HPT_372 2 63 #define HPT_374 3 64 #define HPT_OLD 1 65 66 /* 67 * HighPoint chipset support functions 68 */ 69 static int 70 ata_highpoint_probe(device_t dev) 71 { 72 struct ata_pci_controller *ctlr = device_get_softc(dev); 73 const struct ata_chip_id *idx; 74 static const struct ata_chip_id ids[] = 75 {{ ATA_HPT374, 0x07, HPT_374, 0, ATA_UDMA6, "HPT374" }, 76 { ATA_HPT372, 0x02, HPT_372, 0, ATA_UDMA6, "HPT372N" }, 77 { ATA_HPT372, 0x01, HPT_372, 0, ATA_UDMA6, "HPT372" }, 78 { ATA_HPT371, 0x01, HPT_372, 0, ATA_UDMA6, "HPT371" }, 79 { ATA_HPT366, 0x05, HPT_372, 0, ATA_UDMA6, "HPT372" }, 80 { ATA_HPT366, 0x03, HPT_370, 0, ATA_UDMA5, "HPT370" }, 81 { ATA_HPT366, 0x02, HPT_366, 0, ATA_UDMA4, "HPT368" }, 82 { ATA_HPT366, 0x00, HPT_366, HPT_OLD, ATA_UDMA4, "HPT366" }, 83 { ATA_HPT302, 0x01, HPT_372, 0, ATA_UDMA6, "HPT302" }, 84 { 0, 0, 0, 0, 0, 0}}; 85 char buffer[64]; 86 87 if (pci_get_vendor(dev) != ATA_HIGHPOINT_ID) 88 return ENXIO; 89 90 if (!(idx = ata_match_chip(dev, ids))) 91 return ENXIO; 92 93 strcpy(buffer, "HighPoint "); 94 strcat(buffer, idx->text); 95 if (idx->cfg1 == HPT_374) { 96 if (pci_get_function(dev) == 0) 97 strcat(buffer, " (channel 0+1)"); 98 if (pci_get_function(dev) == 1) 99 strcat(buffer, " (channel 2+3)"); 100 } 101 sprintf(buffer, "%s %s controller", buffer, ata_mode2str(idx->max_dma)); 102 device_set_desc_copy(dev, buffer); 103 ctlr->chip = idx; 104 ctlr->chipinit = ata_highpoint_chipinit; 105 return (BUS_PROBE_LOW_PRIORITY); 106 } 107 108 static int 109 ata_highpoint_chipinit(device_t dev) 110 { 111 struct ata_pci_controller *ctlr = device_get_softc(dev); 112 113 if (ata_setup_interrupt(dev, ata_generic_intr)) 114 return ENXIO; 115 116 if (ctlr->chip->cfg2 == HPT_OLD) { 117 /* disable interrupt prediction */ 118 pci_write_config(dev, 0x51, (pci_read_config(dev, 0x51, 1) & ~0x80), 1); 119 } 120 else { 121 /* disable interrupt prediction */ 122 pci_write_config(dev, 0x51, (pci_read_config(dev, 0x51, 1) & ~0x03), 1); 123 pci_write_config(dev, 0x55, (pci_read_config(dev, 0x55, 1) & ~0x03), 1); 124 125 /* enable interrupts */ 126 pci_write_config(dev, 0x5a, (pci_read_config(dev, 0x5a, 1) & ~0x10), 1); 127 128 /* set clocks etc */ 129 if (ctlr->chip->cfg1 < HPT_372) 130 pci_write_config(dev, 0x5b, 0x22, 1); 131 else 132 pci_write_config(dev, 0x5b, 133 (pci_read_config(dev, 0x5b, 1) & 0x01) | 0x20, 1); 134 } 135 ctlr->ch_attach = ata_highpoint_ch_attach; 136 ctlr->ch_detach = ata_pci_ch_detach; 137 ctlr->setmode = ata_highpoint_setmode; 138 return 0; 139 } 140 141 static int 142 ata_highpoint_ch_attach(device_t dev) 143 { 144 struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev)); 145 struct ata_channel *ch = device_get_softc(dev); 146 147 /* setup the usual register normal pci style */ 148 if (ata_pci_ch_attach(dev)) 149 return (ENXIO); 150 ch->flags |= ATA_ALWAYS_DMASTAT; 151 ch->flags |= ATA_CHECKS_CABLE; 152 if (ctlr->chip->cfg1 == HPT_366) 153 ch->flags |= ATA_NO_ATAPI_DMA; 154 return (0); 155 } 156 157 static int 158 ata_highpoint_setmode(device_t dev, int target, int mode) 159 { 160 device_t parent = device_get_parent(dev); 161 struct ata_pci_controller *ctlr = device_get_softc(parent); 162 struct ata_channel *ch = device_get_softc(dev); 163 int devno = (ch->unit << 1) + target; 164 static const uint32_t timings33[][4] = { 165 /* HPT366 HPT370 HPT372 HPT374 mode */ 166 { 0x40d0a7aa, 0x06914e57, 0x0d029d5e, 0x0ac1f48a }, /* PIO 0 */ 167 { 0x40d0a7a3, 0x06914e43, 0x0d029d26, 0x0ac1f465 }, /* PIO 1 */ 168 { 0x40d0a753, 0x06514e33, 0x0c829ca6, 0x0a81f454 }, /* PIO 2 */ 169 { 0x40c8a742, 0x06514e22, 0x0c829c84, 0x0a81f443 }, /* PIO 3 */ 170 { 0x40c8a731, 0x06514e21, 0x0c829c62, 0x0a81f442 }, /* PIO 4 */ 171 { 0x20c8a797, 0x26514e97, 0x2c82922e, 0x228082ea }, /* MWDMA 0 */ 172 { 0x20c8a732, 0x26514e33, 0x2c829266, 0x22808254 }, /* MWDMA 1 */ 173 { 0x20c8a731, 0x26514e21, 0x2c829262, 0x22808242 }, /* MWDMA 2 */ 174 { 0x10c8a731, 0x16514e31, 0x1c829c62, 0x121882ea }, /* UDMA 0 */ 175 { 0x10cba731, 0x164d4e31, 0x1c9a9c62, 0x12148254 }, /* UDMA 1 */ 176 { 0x10caa731, 0x16494e31, 0x1c929c62, 0x120c8242 }, /* UDMA 2 */ 177 { 0x10cfa731, 0x166d4e31, 0x1c8e9c62, 0x128c8242 }, /* UDMA 3 */ 178 { 0x10c9a731, 0x16454e31, 0x1c8a9c62, 0x12ac8242 }, /* UDMA 4 */ 179 { 0, 0x16454e31, 0x1c8a9c62, 0x12848242 }, /* UDMA 5 */ 180 { 0, 0, 0x1c869c62, 0x12808242 } /* UDMA 6 */ 181 }; 182 183 mode = min(mode, ctlr->chip->max_dma); 184 mode = ata_highpoint_check_80pin(dev, mode); 185 /* 186 * most if not all HPT chips cant really handle that the device is 187 * running at ATA_UDMA6/ATA133 speed, so we cheat at set the device to 188 * a max of ATA_UDMA5/ATA100 to guard against suboptimal performance 189 */ 190 mode = min(mode, ATA_UDMA5); 191 pci_write_config(parent, 0x40 + (devno << 2), 192 timings33[ata_mode2idx(mode)][ctlr->chip->cfg1], 4); 193 return (mode); 194 } 195 196 static int 197 ata_highpoint_check_80pin(device_t dev, int mode) 198 { 199 device_t parent = device_get_parent(dev); 200 struct ata_pci_controller *ctlr = device_get_softc(parent); 201 struct ata_channel *ch = device_get_softc(dev); 202 u_int8_t reg, val, res; 203 204 if (ctlr->chip->cfg1 == HPT_374 && pci_get_function(parent) == 1) { 205 reg = ch->unit ? 0x57 : 0x53; 206 val = pci_read_config(parent, reg, 1); 207 pci_write_config(parent, reg, val | 0x80, 1); 208 } 209 else { 210 reg = 0x5b; 211 val = pci_read_config(parent, reg, 1); 212 pci_write_config(parent, reg, val & 0xfe, 1); 213 } 214 res = pci_read_config(parent, 0x5a, 1) & (ch->unit ? 0x1:0x2); 215 pci_write_config(parent, reg, val, 1); 216 217 if (ata_dma_check_80pin && mode > ATA_UDMA2 && res) { 218 ata_print_cable(dev, "controller"); 219 mode = ATA_UDMA2; 220 } 221 return mode; 222 } 223 224 ATA_DECLARE_DRIVER(ata_highpoint); 225