1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 1998 - 2008 Søren Schmidt <sos@FreeBSD.org> 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer, 12 * without modification, immediately at the beginning of the file. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 */ 28 29 #include <sys/cdefs.h> 30 __FBSDID("$FreeBSD$"); 31 32 #include <sys/param.h> 33 #include <sys/module.h> 34 #include <sys/systm.h> 35 #include <sys/kernel.h> 36 #include <sys/ata.h> 37 #include <sys/bus.h> 38 #include <sys/endian.h> 39 #include <sys/malloc.h> 40 #include <sys/lock.h> 41 #include <sys/mutex.h> 42 #include <sys/sema.h> 43 #include <sys/taskqueue.h> 44 #include <vm/uma.h> 45 #include <machine/stdarg.h> 46 #include <machine/resource.h> 47 #include <machine/bus.h> 48 #include <sys/rman.h> 49 #include <dev/pci/pcivar.h> 50 #include <dev/pci/pcireg.h> 51 #include <dev/ata/ata-all.h> 52 #include <dev/ata/ata-pci.h> 53 #include <ata_if.h> 54 55 /* local prototypes */ 56 static int ata_highpoint_chipinit(device_t dev); 57 static int ata_highpoint_ch_attach(device_t dev); 58 static int ata_highpoint_setmode(device_t dev, int target, int mode); 59 static int ata_highpoint_check_80pin(device_t dev, int mode); 60 61 /* misc defines */ 62 #define HPT_366 0 63 #define HPT_370 1 64 #define HPT_372 2 65 #define HPT_374 3 66 #define HPT_OLD 1 67 68 /* 69 * HighPoint chipset support functions 70 */ 71 static int 72 ata_highpoint_probe(device_t dev) 73 { 74 struct ata_pci_controller *ctlr = device_get_softc(dev); 75 const struct ata_chip_id *idx; 76 static const struct ata_chip_id ids[] = 77 {{ ATA_HPT374, 0x07, HPT_374, 0, ATA_UDMA6, "HPT374" }, 78 { ATA_HPT372, 0x02, HPT_372, 0, ATA_UDMA6, "HPT372N" }, 79 { ATA_HPT372, 0x01, HPT_372, 0, ATA_UDMA6, "HPT372" }, 80 { ATA_HPT371, 0x01, HPT_372, 0, ATA_UDMA6, "HPT371" }, 81 { ATA_HPT366, 0x05, HPT_372, 0, ATA_UDMA6, "HPT372" }, 82 { ATA_HPT366, 0x03, HPT_370, 0, ATA_UDMA5, "HPT370" }, 83 { ATA_HPT366, 0x02, HPT_366, 0, ATA_UDMA4, "HPT368" }, 84 { ATA_HPT366, 0x00, HPT_366, HPT_OLD, ATA_UDMA4, "HPT366" }, 85 { ATA_HPT302, 0x01, HPT_372, 0, ATA_UDMA6, "HPT302" }, 86 { 0, 0, 0, 0, 0, 0}}; 87 char buffer[64]; 88 89 if (pci_get_vendor(dev) != ATA_HIGHPOINT_ID) 90 return ENXIO; 91 92 if (!(idx = ata_match_chip(dev, ids))) 93 return ENXIO; 94 95 strcpy(buffer, "HighPoint "); 96 strcat(buffer, idx->text); 97 if (idx->cfg1 == HPT_374) { 98 if (pci_get_function(dev) == 0) 99 strcat(buffer, " (channel 0+1)"); 100 if (pci_get_function(dev) == 1) 101 strcat(buffer, " (channel 2+3)"); 102 } 103 sprintf(buffer, "%s %s controller", buffer, ata_mode2str(idx->max_dma)); 104 device_set_desc_copy(dev, buffer); 105 ctlr->chip = idx; 106 ctlr->chipinit = ata_highpoint_chipinit; 107 return (BUS_PROBE_LOW_PRIORITY); 108 } 109 110 static int 111 ata_highpoint_chipinit(device_t dev) 112 { 113 struct ata_pci_controller *ctlr = device_get_softc(dev); 114 115 if (ata_setup_interrupt(dev, ata_generic_intr)) 116 return ENXIO; 117 118 if (ctlr->chip->cfg2 == HPT_OLD) { 119 /* disable interrupt prediction */ 120 pci_write_config(dev, 0x51, (pci_read_config(dev, 0x51, 1) & ~0x80), 1); 121 } 122 else { 123 /* disable interrupt prediction */ 124 pci_write_config(dev, 0x51, (pci_read_config(dev, 0x51, 1) & ~0x03), 1); 125 pci_write_config(dev, 0x55, (pci_read_config(dev, 0x55, 1) & ~0x03), 1); 126 127 /* enable interrupts */ 128 pci_write_config(dev, 0x5a, (pci_read_config(dev, 0x5a, 1) & ~0x10), 1); 129 130 /* set clocks etc */ 131 if (ctlr->chip->cfg1 < HPT_372) 132 pci_write_config(dev, 0x5b, 0x22, 1); 133 else 134 pci_write_config(dev, 0x5b, 135 (pci_read_config(dev, 0x5b, 1) & 0x01) | 0x20, 1); 136 } 137 ctlr->ch_attach = ata_highpoint_ch_attach; 138 ctlr->ch_detach = ata_pci_ch_detach; 139 ctlr->setmode = ata_highpoint_setmode; 140 return 0; 141 } 142 143 static int 144 ata_highpoint_ch_attach(device_t dev) 145 { 146 struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev)); 147 struct ata_channel *ch = device_get_softc(dev); 148 149 /* setup the usual register normal pci style */ 150 if (ata_pci_ch_attach(dev)) 151 return (ENXIO); 152 ch->flags |= ATA_ALWAYS_DMASTAT; 153 ch->flags |= ATA_CHECKS_CABLE; 154 if (ctlr->chip->cfg1 == HPT_366) 155 ch->flags |= ATA_NO_ATAPI_DMA; 156 return (0); 157 } 158 159 static int 160 ata_highpoint_setmode(device_t dev, int target, int mode) 161 { 162 device_t parent = device_get_parent(dev); 163 struct ata_pci_controller *ctlr = device_get_softc(parent); 164 struct ata_channel *ch = device_get_softc(dev); 165 int devno = (ch->unit << 1) + target; 166 static const uint32_t timings33[][4] = { 167 /* HPT366 HPT370 HPT372 HPT374 mode */ 168 { 0x40d0a7aa, 0x06914e57, 0x0d029d5e, 0x0ac1f48a }, /* PIO 0 */ 169 { 0x40d0a7a3, 0x06914e43, 0x0d029d26, 0x0ac1f465 }, /* PIO 1 */ 170 { 0x40d0a753, 0x06514e33, 0x0c829ca6, 0x0a81f454 }, /* PIO 2 */ 171 { 0x40c8a742, 0x06514e22, 0x0c829c84, 0x0a81f443 }, /* PIO 3 */ 172 { 0x40c8a731, 0x06514e21, 0x0c829c62, 0x0a81f442 }, /* PIO 4 */ 173 { 0x20c8a797, 0x26514e97, 0x2c82922e, 0x228082ea }, /* MWDMA 0 */ 174 { 0x20c8a732, 0x26514e33, 0x2c829266, 0x22808254 }, /* MWDMA 1 */ 175 { 0x20c8a731, 0x26514e21, 0x2c829262, 0x22808242 }, /* MWDMA 2 */ 176 { 0x10c8a731, 0x16514e31, 0x1c829c62, 0x121882ea }, /* UDMA 0 */ 177 { 0x10cba731, 0x164d4e31, 0x1c9a9c62, 0x12148254 }, /* UDMA 1 */ 178 { 0x10caa731, 0x16494e31, 0x1c929c62, 0x120c8242 }, /* UDMA 2 */ 179 { 0x10cfa731, 0x166d4e31, 0x1c8e9c62, 0x128c8242 }, /* UDMA 3 */ 180 { 0x10c9a731, 0x16454e31, 0x1c8a9c62, 0x12ac8242 }, /* UDMA 4 */ 181 { 0, 0x16454e31, 0x1c8a9c62, 0x12848242 }, /* UDMA 5 */ 182 { 0, 0, 0x1c869c62, 0x12808242 } /* UDMA 6 */ 183 }; 184 185 mode = min(mode, ctlr->chip->max_dma); 186 mode = ata_highpoint_check_80pin(dev, mode); 187 /* 188 * most if not all HPT chips cant really handle that the device is 189 * running at ATA_UDMA6/ATA133 speed, so we cheat at set the device to 190 * a max of ATA_UDMA5/ATA100 to guard against suboptimal performance 191 */ 192 mode = min(mode, ATA_UDMA5); 193 pci_write_config(parent, 0x40 + (devno << 2), 194 timings33[ata_mode2idx(mode)][ctlr->chip->cfg1], 4); 195 return (mode); 196 } 197 198 static int 199 ata_highpoint_check_80pin(device_t dev, int mode) 200 { 201 device_t parent = device_get_parent(dev); 202 struct ata_pci_controller *ctlr = device_get_softc(parent); 203 struct ata_channel *ch = device_get_softc(dev); 204 u_int8_t reg, val, res; 205 206 if (ctlr->chip->cfg1 == HPT_374 && pci_get_function(parent) == 1) { 207 reg = ch->unit ? 0x57 : 0x53; 208 val = pci_read_config(parent, reg, 1); 209 pci_write_config(parent, reg, val | 0x80, 1); 210 } 211 else { 212 reg = 0x5b; 213 val = pci_read_config(parent, reg, 1); 214 pci_write_config(parent, reg, val & 0xfe, 1); 215 } 216 res = pci_read_config(parent, 0x5a, 1) & (ch->unit ? 0x1:0x2); 217 pci_write_config(parent, reg, val, 1); 218 219 if (ata_dma_check_80pin && mode > ATA_UDMA2 && res) { 220 ata_print_cable(dev, "controller"); 221 mode = ATA_UDMA2; 222 } 223 return mode; 224 } 225 226 ATA_DECLARE_DRIVER(ata_highpoint); 227