1 /*- 2 * Copyright (c) 1998 - 2008 Søren Schmidt <sos@FreeBSD.org> 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer, 10 * without modification, immediately at the beginning of the file. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25 */ 26 27 #include <sys/cdefs.h> 28 __FBSDID("$FreeBSD$"); 29 30 #include "opt_ata.h" 31 #include <sys/param.h> 32 #include <sys/module.h> 33 #include <sys/systm.h> 34 #include <sys/kernel.h> 35 #include <sys/ata.h> 36 #include <sys/bus.h> 37 #include <sys/endian.h> 38 #include <sys/malloc.h> 39 #include <sys/lock.h> 40 #include <sys/mutex.h> 41 #include <sys/sema.h> 42 #include <sys/taskqueue.h> 43 #include <vm/uma.h> 44 #include <machine/stdarg.h> 45 #include <machine/resource.h> 46 #include <machine/bus.h> 47 #include <sys/rman.h> 48 #include <dev/pci/pcivar.h> 49 #include <dev/pci/pcireg.h> 50 #include <dev/ata/ata-all.h> 51 #include <dev/ata/ata-pci.h> 52 #include <ata_if.h> 53 54 /* local prototypes */ 55 static int ata_ali_chipinit(device_t dev); 56 static int ata_ali_chipdeinit(device_t dev); 57 static int ata_ali_ch_attach(device_t dev); 58 static int ata_ali_sata_ch_attach(device_t dev); 59 static void ata_ali_reset(device_t dev); 60 static int ata_ali_setmode(device_t dev, int target, int mode); 61 62 /* misc defines */ 63 #define ALI_OLD 0x01 64 #define ALI_NEW 0x02 65 #define ALI_SATA 0x04 66 67 struct ali_sata_resources { 68 struct resource *bars[4]; 69 }; 70 71 /* 72 * Acer Labs Inc (ALI) chipset support functions 73 */ 74 static int 75 ata_ali_probe(device_t dev) 76 { 77 struct ata_pci_controller *ctlr = device_get_softc(dev); 78 static const struct ata_chip_id ids[] = 79 {{ ATA_ALI_5289, 0x00, 2, ALI_SATA, ATA_SA150, "M5289" }, 80 { ATA_ALI_5288, 0x00, 4, ALI_SATA, ATA_SA300, "M5288" }, 81 { ATA_ALI_5287, 0x00, 4, ALI_SATA, ATA_SA150, "M5287" }, 82 { ATA_ALI_5281, 0x00, 2, ALI_SATA, ATA_SA150, "M5281" }, 83 { ATA_ALI_5228, 0xc5, 0, ALI_NEW, ATA_UDMA6, "M5228" }, 84 { ATA_ALI_5229, 0xc5, 0, ALI_NEW, ATA_UDMA6, "M5229" }, 85 { ATA_ALI_5229, 0xc4, 0, ALI_NEW, ATA_UDMA5, "M5229" }, 86 { ATA_ALI_5229, 0xc2, 0, ALI_NEW, ATA_UDMA4, "M5229" }, 87 { ATA_ALI_5229, 0x20, 0, ALI_OLD, ATA_UDMA2, "M5229" }, 88 { ATA_ALI_5229, 0x00, 0, ALI_OLD, ATA_WDMA2, "M5229" }, 89 { 0, 0, 0, 0, 0, 0}}; 90 91 if (pci_get_vendor(dev) != ATA_ACER_LABS_ID) 92 return ENXIO; 93 94 if (!(ctlr->chip = ata_match_chip(dev, ids))) 95 return ENXIO; 96 97 ata_set_desc(dev); 98 ctlr->chipinit = ata_ali_chipinit; 99 ctlr->chipdeinit = ata_ali_chipdeinit; 100 return (BUS_PROBE_DEFAULT); 101 } 102 103 static int 104 ata_ali_chipinit(device_t dev) 105 { 106 struct ata_pci_controller *ctlr = device_get_softc(dev); 107 struct ali_sata_resources *res; 108 int i, rid; 109 110 if (ata_setup_interrupt(dev, ata_generic_intr)) 111 return ENXIO; 112 113 switch (ctlr->chip->cfg2) { 114 case ALI_SATA: 115 ctlr->channels = ctlr->chip->cfg1; 116 ctlr->ch_attach = ata_ali_sata_ch_attach; 117 ctlr->ch_detach = ata_pci_ch_detach; 118 ctlr->setmode = ata_sata_setmode; 119 ctlr->getrev = ata_sata_getrev; 120 121 /* AHCI mode is correctly supported only on the ALi 5288. */ 122 if ((ctlr->chip->chipid == ATA_ALI_5288) && 123 (ata_ahci_chipinit(dev) != ENXIO)) 124 return 0; 125 126 /* Allocate resources for later use by channel attach routines. */ 127 res = malloc(sizeof(struct ali_sata_resources), M_ATAPCI, M_WAITOK); 128 for (i = 0; i < 4; i++) { 129 rid = PCIR_BAR(i); 130 res->bars[i] = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &rid, 131 RF_ACTIVE); 132 if (res->bars[i] == NULL) { 133 device_printf(dev, "Failed to allocate BAR %d\n", i); 134 for (i--; i >=0; i--) 135 bus_release_resource(dev, SYS_RES_IOPORT, 136 PCIR_BAR(i), res->bars[i]); 137 free(res, M_TEMP); 138 return ENXIO; 139 } 140 } 141 ctlr->chipset_data = res; 142 break; 143 144 case ALI_NEW: 145 /* use device interrupt as byte count end */ 146 pci_write_config(dev, 0x4a, pci_read_config(dev, 0x4a, 1) | 0x20, 1); 147 148 /* enable cable detection and UDMA support on revisions < 0xc7 */ 149 if (ctlr->chip->chiprev < 0xc7) 150 pci_write_config(dev, 0x4b, pci_read_config(dev, 0x4b, 1) | 151 0x09, 1); 152 153 /* enable ATAPI UDMA mode (even if we are going to do PIO) */ 154 pci_write_config(dev, 0x53, pci_read_config(dev, 0x53, 1) | 155 (ctlr->chip->chiprev >= 0xc7 ? 0x03 : 0x01), 1); 156 157 /* only chips with revision > 0xc4 can do 48bit DMA */ 158 if (ctlr->chip->chiprev <= 0xc4) 159 device_printf(dev, 160 "using PIO transfers above 137GB as workaround for " 161 "48bit DMA access bug, expect reduced performance\n"); 162 ctlr->ch_attach = ata_ali_ch_attach; 163 ctlr->ch_detach = ata_pci_ch_detach; 164 ctlr->reset = ata_ali_reset; 165 ctlr->setmode = ata_ali_setmode; 166 break; 167 168 case ALI_OLD: 169 /* deactivate the ATAPI FIFO and enable ATAPI UDMA */ 170 pci_write_config(dev, 0x53, pci_read_config(dev, 0x53, 1) | 0x03, 1); 171 ctlr->setmode = ata_ali_setmode; 172 break; 173 } 174 return 0; 175 } 176 177 static int 178 ata_ali_chipdeinit(device_t dev) 179 { 180 struct ata_pci_controller *ctlr = device_get_softc(dev); 181 struct ali_sata_resources *res; 182 int i; 183 184 if (ctlr->chip->cfg2 == ALI_SATA) { 185 res = ctlr->chipset_data; 186 for (i = 0; i < 4; i++) { 187 if (res->bars[i] != NULL) { 188 bus_release_resource(dev, SYS_RES_IOPORT, 189 PCIR_BAR(i), res->bars[i]); 190 } 191 } 192 free(res, M_ATAPCI); 193 ctlr->chipset_data = NULL; 194 } 195 return (0); 196 } 197 198 static int 199 ata_ali_ch_attach(device_t dev) 200 { 201 struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev)); 202 struct ata_channel *ch = device_get_softc(dev); 203 204 /* setup the usual register normal pci style */ 205 if (ata_pci_ch_attach(dev)) 206 return ENXIO; 207 208 if (ctlr->chip->cfg2 & ALI_NEW && ctlr->chip->chiprev < 0xc7) 209 ch->flags |= ATA_CHECKS_CABLE; 210 /* older chips can't do 48bit DMA transfers */ 211 if (ctlr->chip->chiprev <= 0xc4) { 212 ch->flags |= ATA_NO_48BIT_DMA; 213 if (ch->dma.max_iosize > 256 * 512) 214 ch->dma.max_iosize = 256 * 512; 215 } 216 #ifdef ATA_CAM 217 if (ctlr->chip->cfg2 & ALI_NEW) 218 ch->flags |= ATA_NO_ATAPI_DMA; 219 #endif 220 221 return 0; 222 } 223 224 static int 225 ata_ali_sata_ch_attach(device_t dev) 226 { 227 device_t parent = device_get_parent(dev); 228 struct ata_pci_controller *ctlr = device_get_softc(parent); 229 struct ata_channel *ch = device_get_softc(dev); 230 struct ali_sata_resources *res; 231 struct resource *io = NULL, *ctlio = NULL; 232 int unit01 = (ch->unit & 1), unit10 = (ch->unit & 2); 233 int i; 234 235 res = ctlr->chipset_data; 236 if (unit01) { 237 io = res->bars[2]; 238 ctlio = res->bars[3]; 239 } else { 240 io = res->bars[0]; 241 ctlio = res->bars[1]; 242 } 243 ata_pci_dmainit(dev); 244 for (i = ATA_DATA; i <= ATA_COMMAND; i ++) { 245 ch->r_io[i].res = io; 246 ch->r_io[i].offset = i + (unit10 ? 8 : 0); 247 } 248 ch->r_io[ATA_CONTROL].res = ctlio; 249 ch->r_io[ATA_CONTROL].offset = 2 + (unit10 ? 4 : 0); 250 ch->r_io[ATA_IDX_ADDR].res = io; 251 ata_default_registers(dev); 252 if (ctlr->r_res1) { 253 for (i = ATA_BMCMD_PORT; i <= ATA_BMDTP_PORT; i++) { 254 ch->r_io[i].res = ctlr->r_res1; 255 ch->r_io[i].offset = (i - ATA_BMCMD_PORT)+(ch->unit * ATA_BMIOSIZE); 256 } 257 } 258 ch->flags |= ATA_NO_SLAVE; 259 ch->flags |= ATA_SATA; 260 261 /* XXX SOS PHY handling awkward in ALI chip not supported yet */ 262 ata_pci_hw(dev); 263 return 0; 264 } 265 266 static void 267 ata_ali_reset(device_t dev) 268 { 269 struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev)); 270 struct ata_channel *ch = device_get_softc(dev); 271 device_t *children; 272 int nchildren, i; 273 274 ata_generic_reset(dev); 275 276 /* 277 * workaround for datacorruption bug found on at least SUN Blade-100 278 * find the ISA function on the southbridge and disable then enable 279 * the ATA channel tristate buffer 280 */ 281 if (ctlr->chip->chiprev == 0xc3 || ctlr->chip->chiprev == 0xc2) { 282 if (!device_get_children(GRANDPARENT(dev), &children, &nchildren)) { 283 for (i = 0; i < nchildren; i++) { 284 if (pci_get_devid(children[i]) == ATA_ALI_1533) { 285 pci_write_config(children[i], 0x58, 286 pci_read_config(children[i], 0x58, 1) & 287 ~(0x04 << ch->unit), 1); 288 pci_write_config(children[i], 0x58, 289 pci_read_config(children[i], 0x58, 1) | 290 (0x04 << ch->unit), 1); 291 break; 292 } 293 } 294 free(children, M_TEMP); 295 } 296 } 297 } 298 299 static int 300 ata_ali_setmode(device_t dev, int target, int mode) 301 { 302 device_t parent = device_get_parent(dev); 303 struct ata_pci_controller *ctlr = device_get_softc(parent); 304 struct ata_channel *ch = device_get_softc(dev); 305 int devno = (ch->unit << 1) + target; 306 int piomode; 307 static const uint32_t piotimings[] = 308 { 0x006d0003, 0x00580002, 0x00440001, 0x00330001, 309 0x00310001, 0x006d0003, 0x00330001, 0x00310001 }; 310 static const uint8_t udma[] = {0x0c, 0x0b, 0x0a, 0x09, 0x08, 0x0f, 311 0x0d}; 312 uint32_t word54; 313 314 mode = min(mode, ctlr->chip->max_dma); 315 316 if (ctlr->chip->cfg2 & ALI_NEW && ctlr->chip->chiprev < 0xc7) { 317 if (ata_dma_check_80pin && mode > ATA_UDMA2 && 318 pci_read_config(parent, 0x4a, 1) & (1 << ch->unit)) { 319 ata_print_cable(dev, "controller"); 320 mode = ATA_UDMA2; 321 } 322 } 323 if (ctlr->chip->cfg2 & ALI_OLD) { 324 /* doesn't support ATAPI DMA on write */ 325 ch->flags |= ATA_ATAPI_DMA_RO; 326 if (ch->devices & ATA_ATAPI_MASTER && 327 ch->devices & ATA_ATAPI_SLAVE) { 328 /* doesn't support ATAPI DMA on two ATAPI devices */ 329 device_printf(dev, "two atapi devices on this channel," 330 " no DMA\n"); 331 mode = min(mode, ATA_PIO_MAX); 332 } 333 } 334 /* Set UDMA mode */ 335 word54 = pci_read_config(parent, 0x54, 4); 336 if (mode >= ATA_UDMA0) { 337 word54 &= ~(0x000f000f << (devno << 2)); 338 word54 |= (((udma[mode&ATA_MODE_MASK]<<16)|0x05)<<(devno<<2)); 339 piomode = ATA_PIO4; 340 } 341 else { 342 word54 &= ~(0x0008000f << (devno << 2)); 343 piomode = mode; 344 } 345 pci_write_config(parent, 0x54, word54, 4); 346 /* Set PIO/WDMA mode */ 347 pci_write_config(parent, 0x58 + (ch->unit << 2), 348 piotimings[ata_mode2idx(piomode)], 4); 349 return (mode); 350 } 351 352 ATA_DECLARE_DRIVER(ata_ali); 353 MODULE_DEPEND(ata_ali, ata_ahci, 1, 1, 1); 354