xref: /freebsd/sys/dev/ata/chipsets/ata-acerlabs.c (revision 907b59d76938e654f0d040a888e8dfca3de1e222)
1 /*-
2  * Copyright (c) 1998 - 2008 Søren Schmidt <sos@FreeBSD.org>
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer,
10  *    without modification, immediately at the beginning of the file.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  *
15  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
16  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
18  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
19  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
20  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
21  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
22  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
23  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
24  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
25  */
26 
27 #include <sys/cdefs.h>
28 __FBSDID("$FreeBSD$");
29 
30 #include <sys/param.h>
31 #include <sys/module.h>
32 #include <sys/systm.h>
33 #include <sys/kernel.h>
34 #include <sys/ata.h>
35 #include <sys/bus.h>
36 #include <sys/endian.h>
37 #include <sys/malloc.h>
38 #include <sys/lock.h>
39 #include <sys/mutex.h>
40 #include <sys/sema.h>
41 #include <sys/taskqueue.h>
42 #include <vm/uma.h>
43 #include <machine/stdarg.h>
44 #include <machine/resource.h>
45 #include <machine/bus.h>
46 #include <sys/rman.h>
47 #include <dev/pci/pcivar.h>
48 #include <dev/pci/pcireg.h>
49 #include <dev/ata/ata-all.h>
50 #include <dev/ata/ata-pci.h>
51 #include <ata_if.h>
52 
53 /* local prototypes */
54 static int ata_ali_chipinit(device_t dev);
55 static int ata_ali_chipdeinit(device_t dev);
56 static int ata_ali_ch_attach(device_t dev);
57 static int ata_ali_sata_ch_attach(device_t dev);
58 static void ata_ali_reset(device_t dev);
59 static int ata_ali_setmode(device_t dev, int target, int mode);
60 
61 /* misc defines */
62 #define ALI_OLD		0x01
63 #define ALI_NEW		0x02
64 #define ALI_SATA	0x04
65 
66 struct ali_sata_resources {
67 	struct resource *bars[4];
68 };
69 
70 /*
71  * Acer Labs Inc (ALI) chipset support functions
72  */
73 static int
74 ata_ali_probe(device_t dev)
75 {
76     struct ata_pci_controller *ctlr = device_get_softc(dev);
77     static const struct ata_chip_id ids[] =
78     {{ ATA_ALI_5289, 0x00, 2, ALI_SATA, ATA_SA150, "M5289" },
79      { ATA_ALI_5288, 0x00, 4, ALI_SATA, ATA_SA300, "M5288" },
80      { ATA_ALI_5287, 0x00, 4, ALI_SATA, ATA_SA150, "M5287" },
81      { ATA_ALI_5281, 0x00, 2, ALI_SATA, ATA_SA150, "M5281" },
82      { ATA_ALI_5228, 0xc5, 0, ALI_NEW,  ATA_UDMA6, "M5228" },
83      { ATA_ALI_5229, 0xc5, 0, ALI_NEW,  ATA_UDMA6, "M5229" },
84      { ATA_ALI_5229, 0xc4, 0, ALI_NEW,  ATA_UDMA5, "M5229" },
85      { ATA_ALI_5229, 0xc2, 0, ALI_NEW,  ATA_UDMA4, "M5229" },
86      { ATA_ALI_5229, 0x20, 0, ALI_OLD,  ATA_UDMA2, "M5229" },
87      { ATA_ALI_5229, 0x00, 0, ALI_OLD,  ATA_WDMA2, "M5229" },
88      { 0, 0, 0, 0, 0, 0}};
89 
90     if (pci_get_vendor(dev) != ATA_ACER_LABS_ID)
91 	return ENXIO;
92 
93     if (!(ctlr->chip = ata_match_chip(dev, ids)))
94 	return ENXIO;
95 
96     ata_set_desc(dev);
97     ctlr->chipinit = ata_ali_chipinit;
98     ctlr->chipdeinit = ata_ali_chipdeinit;
99     return (BUS_PROBE_LOW_PRIORITY);
100 }
101 
102 static int
103 ata_ali_chipinit(device_t dev)
104 {
105     struct ata_pci_controller *ctlr = device_get_softc(dev);
106     struct ali_sata_resources *res;
107     int i, rid;
108 
109     if (ata_setup_interrupt(dev, ata_generic_intr))
110 	return ENXIO;
111 
112     switch (ctlr->chip->cfg2) {
113     case ALI_SATA:
114 	ctlr->channels = ctlr->chip->cfg1;
115 	ctlr->ch_attach = ata_ali_sata_ch_attach;
116 	ctlr->ch_detach = ata_pci_ch_detach;
117 	ctlr->setmode = ata_sata_setmode;
118 	ctlr->getrev = ata_sata_getrev;
119 
120 	/* Allocate resources for later use by channel attach routines. */
121 	res = malloc(sizeof(struct ali_sata_resources), M_ATAPCI, M_WAITOK);
122 	for (i = 0; i < 4; i++) {
123 		rid = PCIR_BAR(i);
124 		res->bars[i] = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &rid,
125 		    RF_ACTIVE);
126 		if (res->bars[i] == NULL) {
127 			device_printf(dev, "Failed to allocate BAR %d\n", i);
128 			for (i--; i >=0; i--)
129 				bus_release_resource(dev, SYS_RES_IOPORT,
130 				    PCIR_BAR(i), res->bars[i]);
131 			free(res, M_ATAPCI);
132 			return ENXIO;
133 		}
134 	}
135 	ctlr->chipset_data = res;
136 	break;
137 
138     case ALI_NEW:
139 	/* use device interrupt as byte count end */
140 	pci_write_config(dev, 0x4a, pci_read_config(dev, 0x4a, 1) | 0x20, 1);
141 
142 	/* enable cable detection and UDMA support on revisions < 0xc7 */
143 	if (ctlr->chip->chiprev < 0xc7)
144 	    pci_write_config(dev, 0x4b, pci_read_config(dev, 0x4b, 1) |
145 		0x09, 1);
146 
147 	/* enable ATAPI UDMA mode (even if we are going to do PIO) */
148 	pci_write_config(dev, 0x53, pci_read_config(dev, 0x53, 1) |
149 	    (ctlr->chip->chiprev >= 0xc7 ? 0x03 : 0x01), 1);
150 
151 	/* only chips with revision > 0xc4 can do 48bit DMA */
152 	if (ctlr->chip->chiprev <= 0xc4)
153 	    device_printf(dev,
154 			  "using PIO transfers above 137GB as workaround for "
155 			  "48bit DMA access bug, expect reduced performance\n");
156 	ctlr->ch_attach = ata_ali_ch_attach;
157 	ctlr->ch_detach = ata_pci_ch_detach;
158 	ctlr->reset = ata_ali_reset;
159 	ctlr->setmode = ata_ali_setmode;
160 	break;
161 
162     case ALI_OLD:
163 	/* deactivate the ATAPI FIFO and enable ATAPI UDMA */
164 	pci_write_config(dev, 0x53, pci_read_config(dev, 0x53, 1) | 0x03, 1);
165 	ctlr->setmode = ata_ali_setmode;
166 	break;
167     }
168     return 0;
169 }
170 
171 static int
172 ata_ali_chipdeinit(device_t dev)
173 {
174 	struct ata_pci_controller *ctlr = device_get_softc(dev);
175 	struct ali_sata_resources *res;
176 	int i;
177 
178 	if (ctlr->chip->cfg2 == ALI_SATA) {
179 		res = ctlr->chipset_data;
180 		for (i = 0; i < 4; i++) {
181 			if (res->bars[i] != NULL) {
182 				bus_release_resource(dev, SYS_RES_IOPORT,
183 				    PCIR_BAR(i), res->bars[i]);
184 			}
185 		}
186 		free(res, M_ATAPCI);
187 		ctlr->chipset_data = NULL;
188 	}
189 	return (0);
190 }
191 
192 static int
193 ata_ali_ch_attach(device_t dev)
194 {
195     struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev));
196     struct ata_channel *ch = device_get_softc(dev);
197 
198     /* setup the usual register normal pci style */
199     if (ata_pci_ch_attach(dev))
200 	return ENXIO;
201 
202     if (ctlr->chip->cfg2 & ALI_NEW && ctlr->chip->chiprev < 0xc7)
203 	ch->flags |= ATA_CHECKS_CABLE;
204     /* older chips can't do 48bit DMA transfers */
205     if (ctlr->chip->chiprev <= 0xc4) {
206 	ch->flags |= ATA_NO_48BIT_DMA;
207 	if (ch->dma.max_iosize > 256 * 512)
208 		ch->dma.max_iosize = 256 * 512;
209     }
210 	if (ctlr->chip->cfg2 & ALI_NEW)
211 		ch->flags |= ATA_NO_ATAPI_DMA;
212 
213     return 0;
214 }
215 
216 static int
217 ata_ali_sata_ch_attach(device_t dev)
218 {
219     device_t parent = device_get_parent(dev);
220     struct ata_pci_controller *ctlr = device_get_softc(parent);
221     struct ata_channel *ch = device_get_softc(dev);
222     struct ali_sata_resources *res;
223     struct resource *io = NULL, *ctlio = NULL;
224     int unit01 = (ch->unit & 1), unit10 = (ch->unit & 2);
225     int i;
226 
227     res = ctlr->chipset_data;
228     if (unit01) {
229 	    io = res->bars[2];
230 	    ctlio = res->bars[3];
231     } else {
232 	    io = res->bars[0];
233 	    ctlio = res->bars[1];
234     }
235     ata_pci_dmainit(dev);
236     for (i = ATA_DATA; i <= ATA_COMMAND; i ++) {
237 	ch->r_io[i].res = io;
238 	ch->r_io[i].offset = i + (unit10 ? 8 : 0);
239     }
240     ch->r_io[ATA_CONTROL].res = ctlio;
241     ch->r_io[ATA_CONTROL].offset = 2 + (unit10 ? 4 : 0);
242     ch->r_io[ATA_IDX_ADDR].res = io;
243     ata_default_registers(dev);
244     if (ctlr->r_res1) {
245 	for (i = ATA_BMCMD_PORT; i <= ATA_BMDTP_PORT; i++) {
246 	    ch->r_io[i].res = ctlr->r_res1;
247 	    ch->r_io[i].offset = (i - ATA_BMCMD_PORT)+(ch->unit * ATA_BMIOSIZE);
248 	}
249     }
250     ch->flags |= ATA_NO_SLAVE;
251     ch->flags |= ATA_SATA;
252 
253     /* XXX SOS PHY handling awkward in ALI chip not supported yet */
254     ata_pci_hw(dev);
255     return 0;
256 }
257 
258 static void
259 ata_ali_reset(device_t dev)
260 {
261     struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev));
262     struct ata_channel *ch = device_get_softc(dev);
263     device_t *children;
264     int nchildren, i;
265 
266     ata_generic_reset(dev);
267 
268     /*
269      * workaround for datacorruption bug found on at least SUN Blade-100
270      * find the ISA function on the southbridge and disable then enable
271      * the ATA channel tristate buffer
272      */
273     if (ctlr->chip->chiprev == 0xc3 || ctlr->chip->chiprev == 0xc2) {
274 	if (!device_get_children(GRANDPARENT(dev), &children, &nchildren)) {
275 	    for (i = 0; i < nchildren; i++) {
276 		if (pci_get_devid(children[i]) == ATA_ALI_1533) {
277 		    pci_write_config(children[i], 0x58,
278 				     pci_read_config(children[i], 0x58, 1) &
279 				     ~(0x04 << ch->unit), 1);
280 		    pci_write_config(children[i], 0x58,
281 				     pci_read_config(children[i], 0x58, 1) |
282 				     (0x04 << ch->unit), 1);
283 		    break;
284 		}
285 	    }
286 	    free(children, M_TEMP);
287 	}
288     }
289 }
290 
291 static int
292 ata_ali_setmode(device_t dev, int target, int mode)
293 {
294 	device_t parent = device_get_parent(dev);
295 	struct ata_pci_controller *ctlr = device_get_softc(parent);
296 	struct ata_channel *ch = device_get_softc(dev);
297 	int devno = (ch->unit << 1) + target;
298 	int piomode;
299 	static const uint32_t piotimings[] =
300 		{ 0x006d0003, 0x00580002, 0x00440001, 0x00330001,
301 		  0x00310001, 0x006d0003, 0x00330001, 0x00310001 };
302 	static const uint8_t udma[] = {0x0c, 0x0b, 0x0a, 0x09, 0x08, 0x0f,
303 	    0x0d};
304 	uint32_t word54;
305 
306         mode = min(mode, ctlr->chip->max_dma);
307 
308 	if (ctlr->chip->cfg2 & ALI_NEW && ctlr->chip->chiprev < 0xc7) {
309 		if (ata_dma_check_80pin && mode > ATA_UDMA2 &&
310 		    pci_read_config(parent, 0x4a, 1) & (1 << ch->unit)) {
311 			ata_print_cable(dev, "controller");
312 			mode = ATA_UDMA2;
313 		}
314 	}
315 	if (ctlr->chip->cfg2 & ALI_OLD) {
316 		/* doesn't support ATAPI DMA on write */
317 		ch->flags |= ATA_ATAPI_DMA_RO;
318 		if (ch->devices & ATA_ATAPI_MASTER &&
319 		    ch->devices & ATA_ATAPI_SLAVE) {
320 		        /* doesn't support ATAPI DMA on two ATAPI devices */
321 		        device_printf(dev, "two atapi devices on this channel,"
322 			    " no DMA\n");
323 		        mode = min(mode, ATA_PIO_MAX);
324 		}
325 	}
326 	/* Set UDMA mode */
327 	word54 = pci_read_config(parent, 0x54, 4);
328 	if (mode >= ATA_UDMA0) {
329 	    word54 &= ~(0x000f000f << (devno << 2));
330 	    word54 |= (((udma[mode&ATA_MODE_MASK]<<16)|0x05)<<(devno<<2));
331 	    piomode = ATA_PIO4;
332 	}
333 	else {
334 	    word54 &= ~(0x0008000f << (devno << 2));
335 	    piomode = mode;
336 	}
337 	pci_write_config(parent, 0x54, word54, 4);
338 	/* Set PIO/WDMA mode */
339 	pci_write_config(parent, 0x58 + (ch->unit << 2),
340 	    piotimings[ata_mode2idx(piomode)], 4);
341 	return (mode);
342 }
343 
344 ATA_DECLARE_DRIVER(ata_ali);
345