xref: /freebsd/sys/dev/ata/chipsets/ata-acerlabs.c (revision 59c8e88e72633afbc47a4ace0d2170d00d51f7dc)
1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause
3  *
4  * Copyright (c) 1998 - 2008 Søren Schmidt <sos@FreeBSD.org>
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer,
12  *    without modification, immediately at the beginning of the file.
13  * 2. Redistributions in binary form must reproduce the above copyright
14  *    notice, this list of conditions and the following disclaimer in the
15  *    documentation and/or other materials provided with the distribution.
16  *
17  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27  */
28 
29 #include <sys/param.h>
30 #include <sys/module.h>
31 #include <sys/systm.h>
32 #include <sys/kernel.h>
33 #include <sys/ata.h>
34 #include <sys/bus.h>
35 #include <sys/endian.h>
36 #include <sys/malloc.h>
37 #include <sys/lock.h>
38 #include <sys/mutex.h>
39 #include <sys/sema.h>
40 #include <sys/taskqueue.h>
41 #include <vm/uma.h>
42 #include <machine/stdarg.h>
43 #include <machine/resource.h>
44 #include <machine/bus.h>
45 #include <sys/rman.h>
46 #include <dev/pci/pcivar.h>
47 #include <dev/pci/pcireg.h>
48 #include <dev/ata/ata-all.h>
49 #include <dev/ata/ata-pci.h>
50 #include <ata_if.h>
51 
52 /* local prototypes */
53 static int ata_ali_chipinit(device_t dev);
54 static int ata_ali_chipdeinit(device_t dev);
55 static int ata_ali_ch_attach(device_t dev);
56 static int ata_ali_sata_ch_attach(device_t dev);
57 static void ata_ali_reset(device_t dev);
58 static int ata_ali_setmode(device_t dev, int target, int mode);
59 
60 /* misc defines */
61 #define ALI_OLD		0x01
62 #define ALI_NEW		0x02
63 #define ALI_SATA	0x04
64 
65 struct ali_sata_resources {
66 	struct resource *bars[4];
67 };
68 
69 /*
70  * Acer Labs Inc (ALI) chipset support functions
71  */
72 static int
73 ata_ali_probe(device_t dev)
74 {
75     struct ata_pci_controller *ctlr = device_get_softc(dev);
76     static const struct ata_chip_id ids[] =
77     {{ ATA_ALI_5289, 0x00, 2, ALI_SATA, ATA_SA150, "M5289" },
78      { ATA_ALI_5288, 0x00, 4, ALI_SATA, ATA_SA300, "M5288" },
79      { ATA_ALI_5287, 0x00, 4, ALI_SATA, ATA_SA150, "M5287" },
80      { ATA_ALI_5281, 0x00, 2, ALI_SATA, ATA_SA150, "M5281" },
81      { ATA_ALI_5228, 0xc5, 0, ALI_NEW,  ATA_UDMA6, "M5228" },
82      { ATA_ALI_5229, 0xc5, 0, ALI_NEW,  ATA_UDMA6, "M5229" },
83      { ATA_ALI_5229, 0xc4, 0, ALI_NEW,  ATA_UDMA5, "M5229" },
84      { ATA_ALI_5229, 0xc2, 0, ALI_NEW,  ATA_UDMA4, "M5229" },
85      { ATA_ALI_5229, 0x20, 0, ALI_OLD,  ATA_UDMA2, "M5229" },
86      { ATA_ALI_5229, 0x00, 0, ALI_OLD,  ATA_WDMA2, "M5229" },
87      { 0, 0, 0, 0, 0, 0}};
88 
89     if (pci_get_vendor(dev) != ATA_ACER_LABS_ID)
90 	return ENXIO;
91 
92     if (!(ctlr->chip = ata_match_chip(dev, ids)))
93 	return ENXIO;
94 
95     ata_set_desc(dev);
96     ctlr->chipinit = ata_ali_chipinit;
97     ctlr->chipdeinit = ata_ali_chipdeinit;
98     return (BUS_PROBE_LOW_PRIORITY);
99 }
100 
101 static int
102 ata_ali_chipinit(device_t dev)
103 {
104     struct ata_pci_controller *ctlr = device_get_softc(dev);
105     struct ali_sata_resources *res;
106     int i, rid;
107 
108     if (ata_setup_interrupt(dev, ata_generic_intr))
109 	return ENXIO;
110 
111     switch (ctlr->chip->cfg2) {
112     case ALI_SATA:
113 	ctlr->channels = ctlr->chip->cfg1;
114 	ctlr->ch_attach = ata_ali_sata_ch_attach;
115 	ctlr->ch_detach = ata_pci_ch_detach;
116 	ctlr->setmode = ata_sata_setmode;
117 	ctlr->getrev = ata_sata_getrev;
118 
119 	/* Allocate resources for later use by channel attach routines. */
120 	res = malloc(sizeof(struct ali_sata_resources), M_ATAPCI, M_WAITOK);
121 	for (i = 0; i < 4; i++) {
122 		rid = PCIR_BAR(i);
123 		res->bars[i] = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &rid,
124 		    RF_ACTIVE);
125 		if (res->bars[i] == NULL) {
126 			device_printf(dev, "Failed to allocate BAR %d\n", i);
127 			for (i--; i >=0; i--)
128 				bus_release_resource(dev, SYS_RES_IOPORT,
129 				    PCIR_BAR(i), res->bars[i]);
130 			free(res, M_ATAPCI);
131 			return ENXIO;
132 		}
133 	}
134 	ctlr->chipset_data = res;
135 	break;
136 
137     case ALI_NEW:
138 	/* use device interrupt as byte count end */
139 	pci_write_config(dev, 0x4a, pci_read_config(dev, 0x4a, 1) | 0x20, 1);
140 
141 	/* enable cable detection and UDMA support on revisions < 0xc7 */
142 	if (ctlr->chip->chiprev < 0xc7)
143 	    pci_write_config(dev, 0x4b, pci_read_config(dev, 0x4b, 1) |
144 		0x09, 1);
145 
146 	/* enable ATAPI UDMA mode (even if we are going to do PIO) */
147 	pci_write_config(dev, 0x53, pci_read_config(dev, 0x53, 1) |
148 	    (ctlr->chip->chiprev >= 0xc7 ? 0x03 : 0x01), 1);
149 
150 	/* only chips with revision > 0xc4 can do 48bit DMA */
151 	if (ctlr->chip->chiprev <= 0xc4)
152 	    device_printf(dev,
153 			  "using PIO transfers above 137GB as workaround for "
154 			  "48bit DMA access bug, expect reduced performance\n");
155 	ctlr->ch_attach = ata_ali_ch_attach;
156 	ctlr->ch_detach = ata_pci_ch_detach;
157 	ctlr->reset = ata_ali_reset;
158 	ctlr->setmode = ata_ali_setmode;
159 	break;
160 
161     case ALI_OLD:
162 	/* deactivate the ATAPI FIFO and enable ATAPI UDMA */
163 	pci_write_config(dev, 0x53, pci_read_config(dev, 0x53, 1) | 0x03, 1);
164 	ctlr->setmode = ata_ali_setmode;
165 	break;
166     }
167     return 0;
168 }
169 
170 static int
171 ata_ali_chipdeinit(device_t dev)
172 {
173 	struct ata_pci_controller *ctlr = device_get_softc(dev);
174 	struct ali_sata_resources *res;
175 	int i;
176 
177 	if (ctlr->chip->cfg2 == ALI_SATA) {
178 		res = ctlr->chipset_data;
179 		for (i = 0; i < 4; i++) {
180 			if (res->bars[i] != NULL) {
181 				bus_release_resource(dev, SYS_RES_IOPORT,
182 				    PCIR_BAR(i), res->bars[i]);
183 			}
184 		}
185 		free(res, M_ATAPCI);
186 		ctlr->chipset_data = NULL;
187 	}
188 	return (0);
189 }
190 
191 static int
192 ata_ali_ch_attach(device_t dev)
193 {
194     struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev));
195     struct ata_channel *ch = device_get_softc(dev);
196 
197     /* setup the usual register normal pci style */
198     if (ata_pci_ch_attach(dev))
199 	return ENXIO;
200 
201     if (ctlr->chip->cfg2 & ALI_NEW && ctlr->chip->chiprev < 0xc7)
202 	ch->flags |= ATA_CHECKS_CABLE;
203     /* older chips can't do 48bit DMA transfers */
204     if (ctlr->chip->chiprev <= 0xc4) {
205 	ch->flags |= ATA_NO_48BIT_DMA;
206 	if (ch->dma.max_iosize > 256 * 512)
207 		ch->dma.max_iosize = 256 * 512;
208     }
209 	if (ctlr->chip->cfg2 & ALI_NEW)
210 		ch->flags |= ATA_NO_ATAPI_DMA;
211 
212     return 0;
213 }
214 
215 static int
216 ata_ali_sata_ch_attach(device_t dev)
217 {
218     device_t parent = device_get_parent(dev);
219     struct ata_pci_controller *ctlr = device_get_softc(parent);
220     struct ata_channel *ch = device_get_softc(dev);
221     struct ali_sata_resources *res;
222     struct resource *io = NULL, *ctlio = NULL;
223     int unit01 = (ch->unit & 1), unit10 = (ch->unit & 2);
224     int i;
225 
226     res = ctlr->chipset_data;
227     if (unit01) {
228 	    io = res->bars[2];
229 	    ctlio = res->bars[3];
230     } else {
231 	    io = res->bars[0];
232 	    ctlio = res->bars[1];
233     }
234     ata_pci_dmainit(dev);
235     for (i = ATA_DATA; i <= ATA_COMMAND; i ++) {
236 	ch->r_io[i].res = io;
237 	ch->r_io[i].offset = i + (unit10 ? 8 : 0);
238     }
239     ch->r_io[ATA_CONTROL].res = ctlio;
240     ch->r_io[ATA_CONTROL].offset = 2 + (unit10 ? 4 : 0);
241     ch->r_io[ATA_IDX_ADDR].res = io;
242     ata_default_registers(dev);
243     if (ctlr->r_res1) {
244 	for (i = ATA_BMCMD_PORT; i <= ATA_BMDTP_PORT; i++) {
245 	    ch->r_io[i].res = ctlr->r_res1;
246 	    ch->r_io[i].offset = (i - ATA_BMCMD_PORT)+(ch->unit * ATA_BMIOSIZE);
247 	}
248     }
249     ch->flags |= ATA_NO_SLAVE;
250     ch->flags |= ATA_SATA;
251 
252     /* XXX SOS PHY handling awkward in ALI chip not supported yet */
253     ata_pci_hw(dev);
254     return 0;
255 }
256 
257 static void
258 ata_ali_reset(device_t dev)
259 {
260     struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev));
261     struct ata_channel *ch = device_get_softc(dev);
262     device_t *children;
263     int nchildren, i;
264 
265     ata_generic_reset(dev);
266 
267     /*
268      * workaround for datacorruption bug found on at least SUN Blade-100
269      * find the ISA function on the southbridge and disable then enable
270      * the ATA channel tristate buffer
271      */
272     if (ctlr->chip->chiprev == 0xc3 || ctlr->chip->chiprev == 0xc2) {
273 	if (!device_get_children(GRANDPARENT(dev), &children, &nchildren)) {
274 	    for (i = 0; i < nchildren; i++) {
275 		if (pci_get_devid(children[i]) == ATA_ALI_1533) {
276 		    pci_write_config(children[i], 0x58,
277 				     pci_read_config(children[i], 0x58, 1) &
278 				     ~(0x04 << ch->unit), 1);
279 		    pci_write_config(children[i], 0x58,
280 				     pci_read_config(children[i], 0x58, 1) |
281 				     (0x04 << ch->unit), 1);
282 		    break;
283 		}
284 	    }
285 	    free(children, M_TEMP);
286 	}
287     }
288 }
289 
290 static int
291 ata_ali_setmode(device_t dev, int target, int mode)
292 {
293 	device_t parent = device_get_parent(dev);
294 	struct ata_pci_controller *ctlr = device_get_softc(parent);
295 	struct ata_channel *ch = device_get_softc(dev);
296 	int devno = (ch->unit << 1) + target;
297 	int piomode;
298 	static const uint32_t piotimings[] =
299 		{ 0x006d0003, 0x00580002, 0x00440001, 0x00330001,
300 		  0x00310001, 0x006d0003, 0x00330001, 0x00310001 };
301 	static const uint8_t udma[] = {0x0c, 0x0b, 0x0a, 0x09, 0x08, 0x0f,
302 	    0x0d};
303 	uint32_t word54;
304 
305         mode = min(mode, ctlr->chip->max_dma);
306 
307 	if (ctlr->chip->cfg2 & ALI_NEW && ctlr->chip->chiprev < 0xc7) {
308 		if (ata_dma_check_80pin && mode > ATA_UDMA2 &&
309 		    pci_read_config(parent, 0x4a, 1) & (1 << ch->unit)) {
310 			ata_print_cable(dev, "controller");
311 			mode = ATA_UDMA2;
312 		}
313 	}
314 	if (ctlr->chip->cfg2 & ALI_OLD) {
315 		/* doesn't support ATAPI DMA on write */
316 		ch->flags |= ATA_ATAPI_DMA_RO;
317 		if (ch->devices & ATA_ATAPI_MASTER &&
318 		    ch->devices & ATA_ATAPI_SLAVE) {
319 		        /* doesn't support ATAPI DMA on two ATAPI devices */
320 		        device_printf(dev, "two atapi devices on this channel,"
321 			    " no DMA\n");
322 		        mode = min(mode, ATA_PIO_MAX);
323 		}
324 	}
325 	/* Set UDMA mode */
326 	word54 = pci_read_config(parent, 0x54, 4);
327 	if (mode >= ATA_UDMA0) {
328 	    word54 &= ~(0x000f000f << (devno << 2));
329 	    word54 |= (((udma[mode&ATA_MODE_MASK]<<16)|0x05)<<(devno<<2));
330 	    piomode = ATA_PIO4;
331 	}
332 	else {
333 	    word54 &= ~(0x0008000f << (devno << 2));
334 	    piomode = mode;
335 	}
336 	pci_write_config(parent, 0x54, word54, 4);
337 	/* Set PIO/WDMA mode */
338 	pci_write_config(parent, 0x58 + (ch->unit << 2),
339 	    piotimings[ata_mode2idx(piomode)], 4);
340 	return (mode);
341 }
342 
343 ATA_DECLARE_DRIVER(ata_ali);
344