1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 1998 - 2008 Søren Schmidt <sos@FreeBSD.org> 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer, 12 * without modification, immediately at the beginning of the file. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 */ 28 29 #include <sys/cdefs.h> 30 __FBSDID("$FreeBSD$"); 31 32 #include <sys/param.h> 33 #include <sys/systm.h> 34 #include <sys/kernel.h> 35 #include <sys/ata.h> 36 #include <sys/bus.h> 37 #include <sys/endian.h> 38 #include <sys/malloc.h> 39 #include <sys/lock.h> 40 #include <sys/mutex.h> 41 #include <sys/sema.h> 42 #include <sys/taskqueue.h> 43 #include <vm/uma.h> 44 #include <machine/stdarg.h> 45 #include <machine/resource.h> 46 #include <machine/bus.h> 47 #include <sys/rman.h> 48 #include <dev/ata/ata-all.h> 49 #include <ata_if.h> 50 51 void 52 ata_sata_phy_check_events(device_t dev, int port) 53 { 54 struct ata_channel *ch = device_get_softc(dev); 55 u_int32_t error, status; 56 57 if (ata_sata_scr_read(ch, port, ATA_SERROR, &error)) 58 return; 59 60 /* Check that SError value is sane. */ 61 if (error == 0xffffffff) 62 return; 63 64 /* Clear set error bits/interrupt. */ 65 if (error) 66 ata_sata_scr_write(ch, port, ATA_SERROR, error); 67 68 /* if we have a connection event deal with it */ 69 if ((error & ATA_SE_PHY_CHANGED) && (ch->pm_level == 0)) { 70 if (bootverbose) { 71 if (ata_sata_scr_read(ch, port, ATA_SSTATUS, &status)) { 72 device_printf(dev, "PHYRDY change\n"); 73 } else if (((status & ATA_SS_DET_MASK) == ATA_SS_DET_PHY_ONLINE) && 74 ((status & ATA_SS_SPD_MASK) != ATA_SS_SPD_NO_SPEED) && 75 ((status & ATA_SS_IPM_MASK) == ATA_SS_IPM_ACTIVE)) { 76 device_printf(dev, "CONNECT requested\n"); 77 } else 78 device_printf(dev, "DISCONNECT requested\n"); 79 } 80 taskqueue_enqueue(taskqueue_thread, &ch->conntask); 81 } 82 } 83 84 int 85 ata_sata_scr_read(struct ata_channel *ch, int port, int reg, uint32_t *val) 86 { 87 88 if (ch->hw.pm_read != NULL) 89 return (ch->hw.pm_read(ch->dev, port, reg, val)); 90 if (ch->r_io[reg].res) { 91 *val = ATA_IDX_INL(ch, reg); 92 return (0); 93 } 94 return (-1); 95 } 96 97 int 98 ata_sata_scr_write(struct ata_channel *ch, int port, int reg, uint32_t val) 99 { 100 101 if (ch->hw.pm_write != NULL) 102 return (ch->hw.pm_write(ch->dev, port, reg, val)); 103 if (ch->r_io[reg].res) { 104 ATA_IDX_OUTL(ch, reg, val); 105 return (0); 106 } 107 return (-1); 108 } 109 110 static int 111 ata_sata_connect(struct ata_channel *ch, int port, int quick) 112 { 113 u_int32_t status; 114 int timeout, t; 115 116 /* wait up to 1 second for "connect well" */ 117 timeout = (quick == 2) ? 0 : 100; 118 t = 0; 119 while (1) { 120 if (ata_sata_scr_read(ch, port, ATA_SSTATUS, &status)) 121 return (0); 122 if (((status & ATA_SS_DET_MASK) == ATA_SS_DET_PHY_ONLINE) && 123 ((status & ATA_SS_SPD_MASK) != ATA_SS_SPD_NO_SPEED) && 124 ((status & ATA_SS_IPM_MASK) == ATA_SS_IPM_ACTIVE)) 125 break; 126 if (++t > timeout) 127 break; 128 ata_udelay(10000); 129 } 130 if (bootverbose) { 131 if (t > timeout) { 132 if (port < 0) { 133 device_printf(ch->dev, "SATA connect timeout status=%08x\n", 134 status); 135 } else { 136 device_printf(ch->dev, "p%d: SATA connect timeout status=%08x\n", 137 port, status); 138 } 139 } else if (port < 0) { 140 device_printf(ch->dev, "SATA connect time=%dms status=%08x\n", 141 t * 10, status); 142 } else { 143 device_printf(ch->dev, "p%d: SATA connect time=%dms status=%08x\n", 144 port, t * 10, status); 145 } 146 } 147 148 /* clear SATA error register */ 149 ata_sata_scr_write(ch, port, ATA_SERROR, 0xffffffff); 150 151 return ((t > timeout) ? 0 : 1); 152 } 153 154 int 155 ata_sata_phy_reset(device_t dev, int port, int quick) 156 { 157 struct ata_channel *ch = device_get_softc(dev); 158 int loop, retry, sata_rev; 159 uint32_t val, val1; 160 161 sata_rev = ch->user[port < 0 ? 0 : port].revision; 162 if (sata_rev > 0) 163 quick = 0; 164 165 if (quick) { 166 if (ata_sata_scr_read(ch, port, ATA_SCONTROL, &val)) 167 return (0); 168 if ((val & ATA_SC_DET_MASK) == ATA_SC_DET_IDLE) { 169 ata_sata_scr_write(ch, port, ATA_SCONTROL, 170 ATA_SC_DET_IDLE | ((ch->pm_level > 0) ? 0 : 171 ATA_SC_IPM_DIS_PARTIAL | ATA_SC_IPM_DIS_SLUMBER)); 172 return ata_sata_connect(ch, port, quick); 173 } 174 } 175 176 if (bootverbose) { 177 if (port < 0) { 178 device_printf(dev, "hard reset ...\n"); 179 } else { 180 device_printf(dev, "p%d: hard reset ...\n", port); 181 } 182 } 183 if (sata_rev == 1) 184 val1 = ATA_SC_SPD_SPEED_GEN1; 185 else if (sata_rev == 2) 186 val1 = ATA_SC_SPD_SPEED_GEN2; 187 else if (sata_rev == 3) 188 val1 = ATA_SC_SPD_SPEED_GEN3; 189 else 190 val1 = 0; 191 for (retry = 0; retry < 10; retry++) { 192 for (loop = 0; loop < 10; loop++) { 193 if (ata_sata_scr_write(ch, port, ATA_SCONTROL, ATA_SC_DET_RESET | 194 val1 | ATA_SC_IPM_DIS_PARTIAL | ATA_SC_IPM_DIS_SLUMBER)) 195 goto fail; 196 ata_udelay(100); 197 if (ata_sata_scr_read(ch, port, ATA_SCONTROL, &val)) 198 goto fail; 199 if ((val & ATA_SC_DET_MASK) == ATA_SC_DET_RESET) 200 break; 201 } 202 ata_udelay(5000); 203 for (loop = 0; loop < 10; loop++) { 204 if (ata_sata_scr_write(ch, port, ATA_SCONTROL, 205 ATA_SC_DET_IDLE | val1 | ((ch->pm_level > 0) ? 0 : 206 ATA_SC_IPM_DIS_PARTIAL | ATA_SC_IPM_DIS_SLUMBER))) 207 goto fail; 208 ata_udelay(100); 209 if (ata_sata_scr_read(ch, port, ATA_SCONTROL, &val)) 210 goto fail; 211 if ((val & ATA_SC_DET_MASK) == 0) 212 return ata_sata_connect(ch, port, 0); 213 } 214 } 215 fail: 216 /* Clear SATA error register. */ 217 ata_sata_scr_write(ch, port, ATA_SERROR, 0xffffffff); 218 219 if (bootverbose) { 220 if (port < 0) { 221 device_printf(dev, "hard reset failed\n"); 222 } else { 223 device_printf(dev, "p%d: hard reset failed\n", port); 224 } 225 } 226 return (0); 227 } 228 229 int 230 ata_sata_setmode(device_t dev, int target, int mode) 231 { 232 233 return (min(mode, ATA_UDMA5)); 234 } 235 236 int 237 ata_sata_getrev(device_t dev, int target) 238 { 239 struct ata_channel *ch = device_get_softc(dev); 240 241 if (ch->r_io[ATA_SSTATUS].res) 242 return ((ATA_IDX_INL(ch, ATA_SSTATUS) & 0x0f0) >> 4); 243 return (0xff); 244 } 245 246 int 247 ata_request2fis_h2d(struct ata_request *request, u_int8_t *fis) 248 { 249 250 if (request->flags & ATA_R_ATAPI) { 251 fis[0] = 0x27; /* host to device */ 252 fis[1] = 0x80 | (request->unit & 0x0f); 253 fis[2] = ATA_PACKET_CMD; 254 if (request->flags & (ATA_R_READ | ATA_R_WRITE)) 255 fis[3] = ATA_F_DMA; 256 else { 257 fis[5] = request->transfersize; 258 fis[6] = request->transfersize >> 8; 259 } 260 fis[7] = ATA_D_LBA; 261 fis[15] = ATA_A_4BIT; 262 return 20; 263 } 264 else { 265 fis[0] = 0x27; /* host to device */ 266 fis[1] = 0x80 | (request->unit & 0x0f); 267 fis[2] = request->u.ata.command; 268 fis[3] = request->u.ata.feature; 269 fis[4] = request->u.ata.lba; 270 fis[5] = request->u.ata.lba >> 8; 271 fis[6] = request->u.ata.lba >> 16; 272 fis[7] = ATA_D_LBA; 273 if (!(request->flags & ATA_R_48BIT)) 274 fis[7] |= (ATA_D_IBM | (request->u.ata.lba >> 24 & 0x0f)); 275 fis[8] = request->u.ata.lba >> 24; 276 fis[9] = request->u.ata.lba >> 32; 277 fis[10] = request->u.ata.lba >> 40; 278 fis[11] = request->u.ata.feature >> 8; 279 fis[12] = request->u.ata.count; 280 fis[13] = request->u.ata.count >> 8; 281 fis[15] = ATA_A_4BIT; 282 return 20; 283 } 284 return 0; 285 } 286 287 void 288 ata_pm_identify(device_t dev) 289 { 290 struct ata_channel *ch = device_get_softc(dev); 291 u_int32_t pm_chipid, pm_revision, pm_ports; 292 int port; 293 294 /* get PM vendor & product data */ 295 if (ch->hw.pm_read(dev, ATA_PM, 0, &pm_chipid)) { 296 device_printf(dev, "error getting PM vendor data\n"); 297 return; 298 } 299 300 /* get PM revision data */ 301 if (ch->hw.pm_read(dev, ATA_PM, 1, &pm_revision)) { 302 device_printf(dev, "error getting PM revision data\n"); 303 return; 304 } 305 306 /* get number of HW ports on the PM */ 307 if (ch->hw.pm_read(dev, ATA_PM, 2, &pm_ports)) { 308 device_printf(dev, "error getting PM port info\n"); 309 return; 310 } 311 pm_ports &= 0x0000000f; 312 313 /* chip specific quirks */ 314 switch (pm_chipid) { 315 case 0x37261095: 316 /* This PM declares 6 ports, while only 5 of them are real. 317 * Port 5 is enclosure management bridge port, which has implementation 318 * problems, causing probe faults. Hide it for now. */ 319 device_printf(dev, "SiI 3726 (rev=%x) Port Multiplier with %d (5) ports\n", 320 pm_revision, pm_ports); 321 pm_ports = 5; 322 break; 323 324 case 0x47261095: 325 /* This PM declares 7 ports, while only 5 of them are real. 326 * Port 5 is some fake "Config Disk" with 640 sectors size, 327 * port 6 is enclosure management bridge port. 328 * Both fake ports has implementation problems, causing 329 * probe faults. Hide them for now. */ 330 device_printf(dev, "SiI 4726 (rev=%x) Port Multiplier with %d (5) ports\n", 331 pm_revision, pm_ports); 332 pm_ports = 5; 333 break; 334 335 default: 336 device_printf(dev, "Port Multiplier (id=%08x rev=%x) with %d ports\n", 337 pm_chipid, pm_revision, pm_ports); 338 } 339 340 /* reset all ports and register if anything connected */ 341 for (port=0; port < pm_ports; port++) { 342 u_int32_t signature; 343 344 if (!ata_sata_phy_reset(dev, port, 1)) 345 continue; 346 347 /* 348 * XXX: I have no idea how to properly wait for PMP port hardreset 349 * completion. Without this delay soft reset does not completes 350 * successfully. 351 */ 352 DELAY(1000000); 353 354 signature = ch->hw.softreset(dev, port); 355 356 if (bootverbose) 357 device_printf(dev, "p%d: SIGNATURE=%08x\n", port, signature); 358 359 /* figure out whats there */ 360 switch (signature >> 16) { 361 case 0x0000: 362 ch->devices |= (ATA_ATA_MASTER << port); 363 continue; 364 case 0xeb14: 365 ch->devices |= (ATA_ATAPI_MASTER << port); 366 continue; 367 } 368 } 369 } 370